Samsung Electronics Co TR32UO LCD TV Monitor User Manual BN68 00860A 00Eng

Samsung Electronics Co Ltd LCD TV Monitor BN68 00860A 00Eng

Contents

Users Manual 1

1-800-SAMSUNG(1-800-726-7864)U.S.ASamsung Electronics AmericaService Division400 Valley Road, Suite 201Mount Arlington, NJ 07856www.samsung.com CanadaSamsung Electronics Canada Inc.Samsung Customer Care55 Standish CourtMississauga, Ontario L5R 4B2www.samsung.caBN68-00940A-00Owner’sInstructionsThis device is a Class B digital apparatus.Register your product atwww.samsung.com/global/registerLN-R1550PLN-R2050PTFT-LCD TELEVISIONBN68-00860A-ooCover.qxd 7/18/05 8:43 AM Page 1
Precautions When Displaying a Still Image Astill image may cause permanent damage to the TV screen.• Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.• Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of the screencaused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.•Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images. Précautions à prendre lors de l'affichage d'une image fixeUne image fixe peut causer des dommages irrémédiables à l'écran du téléviseur.• N'affichez pas une image fixe sur l'écran LCD plus de 2 heures. Cela pourrait provoquer une rémanence de l'image à l'écran. Cette rémanence de l'image est également appelée "brûlure de l'écran". Pour éviter une telle rémanence de l'image à l'écran, réduisez la luminosité et le contraste de l'écran lorsque vous laissez une image fixe affichée.• Regarder l'écran LCD du téléviseur en format 4:3 pendant une longue période peut laisser des traces de bordures à gauche, à droite et au centre de l'écran, à cause de la différence d'émission de lumière sur l'écran.La lecture d'un DVD ou l'utilisation d'une console de jeu peut avoir un effet similaire sur l'écran. Les dommages provoqués par les effets qui précèdent ne sont pas couverts par la garantie.•L'affichage d'images fixes de jeux vidéo et d'ordinateurs pendant plus longtemps qu'une période spécifique peut provoquer des rémanences.Pour éviter cela, réduisez la "luminosité" et le "contraste" lors de l'affichage d'images fixes.Precauciones al mostrar en la pantalla una imagen fijaLa imagen fija puede causar daños permanentes en la pantalla del televisor.•No deje una imagen fija en la pantalla LCD durante más de dos horas ya que se podría producir una retención de la imagen en la pantalla. Este fenómeno de retención de imágenes también se denomina "quemadura de pantalla". Para evitar que se produzca esa persistencia de la imagen, reduzca el nivel de luminosidad y de contraste de la pantalla cuando muestre imágenes fijas.• El uso del televisor LCD en formato 4:3 durante un tiempo prolongado puede dejar rastros de bordes en las partes izquierda, derecha y central de la pantalla debido a las diferencias en la emisión lumínica de la pantalla. La reproducción de un DVD o el uso de una consola de videojuegos pueden provocar un efecto similar en la pantalla. Reproducir un DVD o una videoconsola puede causar un efecto similar en la pantalla. La garantía no cubre estos daños.•Ver imágenes fijas de videojuegos y PC durante más tiempo del indicado puede producir restos de imágenes parciales.Para evitar este efecto, reduzca el 'brillo' y el 'contraste' cuando vea imágenes fijas.MIJU-Still.qxd 7/18/05 8:43 AM Page 1
English-1EnglishSymbol Press Important Note One-TouchButtonContentsGENERAL INFORMATIONList of Features .................................................................................. 2List of Parts ........................................................................................ 2Installing the Stand ............................................................................ 2Installing the Wall Mount Kit ......................................................... 2Viewing the Control Panel.................................................................. 3Viewing the Connection Panel ........................................................... 4Viewing the Remote Control .............................................................. 5Installing Batteries in the Remote Control ......................................... 6OPERATIONTurning the TV On and Off................................................................. 6Changing Channels ........................................................................... 6Adjusting the Volume ......................................................................... 7Viewing the Display............................................................................ 7Plug and Play Feature ....................................................................... 7Selecting the Video Signal-source..................................................... 8Storing Channels Automatically ......................................................... 8Storing Channels Manually ................................................................ 8PICTURE CONTROLUsing Automatic Picture Settings ...................................................... 9Customizing the Picture ..................................................................... 9Adjusting the Color Tone.................................................................... 9Resetting the Picture Settings to the Factory Defaults...................... 10Changing the Picture Size ................................................................. 10Setting the Digital Noise Reduction (Digital NR) ............................... 10Dynamic Contrast............................................................................... 10Viewing Picture-in-Picture .................................................................. 11SOUND CONTROLUsing Automatic Sound Settings .................................................. 11Customizing the Sound ................................................................ 12Choosing a Multi-Channel Sound (MTS) Soundtrack .................. 12Using the Auto Volume ................................................................. 12Listening to the Sound of the Sub Picture.................................... 12TIME SETTINGSetting the Clock .......................................................................... 13Setting the Sleep Timer ............................................................... 13Setting the On/Off Timer............................................................... 13FUNCTION DESCRIPTIONUsing the V-Chip........................................................................... 14Selecting a Menu Language......................................................... 16Viewing Closed Captions ............................................................. 16Using the Energy Saving Feature ................................................ 17Setting the Blue Screen Mode...................................................... 17Selecting the Melody .................................................................... 17Selecting the Source .................................................................... 17Editing the Input Source Name .................................................... 17PC DISPLAYSetting Up Your PC Software (Based on Windows XP)............... 18Setting the PC .............................................................................. 18TROUBLESHOOTINGIdentifying Problems ..................................................................... 19APPENDIXSpecifications ............................................................................... 20Display Modes .............................................................................. 20BN68-00860A-00Eng.qxd 7/19/05 1:52 PM Page 1
English-2General InformationList of FeaturesAdjustable picture settings that can be stored in the TV’s memory.Dynamic Contrast: Automatically detects the input visual signal and adjusts to create optimum contrast.Automatic timer to turn the TV on and off.Aspecial sleep timer.V-Chip function.List of PartsInstalling the StandPlease make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.Remote Control & Batteries (AAA x 2) (BN59-00487A)Power Cord(3903-000085)Cover-Bottom(BN63-02177A)Stand(23, 27”: BN96-02639A) (32”: BN96-02633A)Stand Screw(6002-001294) x 4 Owner’s InstructionsWarranty Card / Registration Card/Safety Guide Manual (Not available in all locations)1. Place the TV faced down on a soft cloth or cushion on a table.2. Put the stand into the hole at the bottom of the TV.3. Insert screw into the hole indicated and tightenInstalling the Wall Mount KitWall mount items (sold separately) allow you to mount the TV on the wall. For the detailed information on installing the Wall Mount, see the instruction in the Wall Mount items. Contact a technician for installing the wall bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.< 2 > < 3 >M4 X L16BN68-00860A-00Eng.qxd 7/19/05 2:40 PM Page 2
English-3Viewing the Control Panel SOURCE Displays a menu of all of the available input sources (TV, AV, S-Video, Component, PC). In the on-screen menu, use this button as you use the ENTER button on the remote control.MENUPress to see an on-screen menu of your TV’s features.Press to decrease or increase the volume.In the on-screen menu, use the buttons as you use theand buttons on the remote control.Press to change channels. In the on-screen menu, use the buttons as you use theand buttons on the remote control.(HEADPHONE JACK)Connect a set of external headphones to this jack for private listening.(POWER)Press to turn the TV on and off.POWER INDICATORBlinks and turns off when the power is on and lights up in stand-by mode.SPEAKERSREMOTE CONTROL SENSORAim the remote control towards this spot on the TV.The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control.The product color and shape may vary depending on the model.BN68-00860A-00Eng.qxd 7/19/05 1:52 PM Page 3
English-4Viewing the Connection PanelWhenever you connect an external device to your TV, make sure that power on the unit is turned off. When connecting an external device, match the color of the connection terminal to the cable.VCR RearDVD Player RearPCDVD Player/Set-Top BoxGreenBlueRedYellowWhiteRedRedWhite RedWhiteBN68-00860A-00Eng.qxd 7/19/05 1:52 PM Page 4
English-5Viewing the Connection PanelDVI INConnect to the digital video output jack on your DVD/Set-Top Box. Connect to the audio output jack on your DVD/Set-Top Box.DVI-D terminal does not support PC.PC INConnect to the video and audio output jack on your PC.ANT INConnect to an antenna or to a cable TV system.AV INVideo and audio inputs for external devices, such as a camcorder or VCR.S-VIDEOConnect an S-Video signal from a camcorder or VCR.POWER INPUT Connect the supplied power cord.COMPONENT IN 1/2Connect component video/audio.KENSINGTON LOCKThe Kensington lock (optional) is a device used to physically fix the system when used in a public place. If you want to use a locking device, contact the dealer where you purchased the TV.Turns the TV on and off.Press to select channels directly on the TV.Press to select channels over 100. For example, to select channel 121, press “+100”, then press “2” and “1”.Press to increase or decrease the volume.Press to temporarily cut off the sound.Press to select a time for the TV to turn off automatically.Displays the main on-screen menu.Use to select on-screen menu items and change menu values.Use to store and delete channels to/from memory.Press to automatically store selected TV/Cable channels.Adjust the TV picture by selecting one of the preset factory settings.(or selects your personal, customized picture settings)Picture-in-Picture ON/OFF.Press to switch to the PC mode.Returns to the previous channel.Press CH / buttons to change channels.Input source selectionUse to see information on the current broadcast.Press to exit the on-screen menu.Press to change the screen size.Press to stop the action during a particular scene. Press again to resume normal video.Press to set caption on/off.Press to change the MTS settings. Adjust the TV sound by selecting one of the preset factory settings.(or selects your personal, customized sound settings)The performance of the remote control may be affected by bright light. Viewing the Remote ControlBN68-00860A-00Eng.qxd 7/19/05 1:52 PM Page 5
English-6OperationTurning the TV On and OffPress the POWER button on the remote control. You can also use the POWER button on the front of the panel.Changing ChannelsUsing the Channel Buttons:1. Press the CH or CH button to change channels. When you press the CH or CH button, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels). You will not see channels that were either erased or not memorized.Using the Number Buttons:1. Press the number buttons to go directly to a channel.To select channel 108, press “ ” “ ” “ ”.When you use the number buttons, you can directly select channels that were either erased or not memorized. To change the channel faster, press the channel buttons, then ENTER . (For channel “4” press “4”, then “ENTER ”)Using the PRE-CH Button to select the Previous Channel:1. Press the PRE-CH button. The TV will switch to the last channel viewed.To quickly switch between two channels that are far apart, tune to one channel, then use the number button toselect the second channel. Then use the PRE-CH button to quickly alternate between them.1. Slide the cover out completely.2. Install two AAA size batteries.Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.3. Replace the cover.Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batteries last for about one year.)If the remote control doesn’t work, check the following:1. Is the TV power on?2. Are the plus and minus ends of the batteries reversed?3. Are the batteries drained?4. Is there a power outage, or is the power cord unplugged?5. Is there a special fluorescent light or neon sign nearby?Installing Batteries in the Remote ControlBN68-00860A-00Eng.qxd 7/19/05 1:52 PM Page 6
English-7Plug and Play FeatureWhen the TV is initially powered on, several basic settings proceed automatically and subsequently. The following settings are available.1. Press the POWER button on the remote control.The message “Plug & Play” is displayed.2. Select the appropriate language by pressing the or button.Press the ENTER button to confirm your choice.3. The message “Check antenna input.” is displayed with “OK” selected.Press the ENTER button.Please check that the antenna cable is connected correctly.4. Press the or button to select “Air”, “STD”, “HRC”, or “IRC”, then press the ENTER button.5. Press the ENTER button to select “Start”.The channel search will start and end automatically. After all the available channels are stored, the “Clock Set” menu appears. Press the ENTER button at any time to interrupt the memorization process.6. Press the ENTER button.Press the or button to move to the “Hour”, “Minute” or “am/pm”.Set the “Hour”, “Minute” or “am/pm” by pressing the or button.7. Press the ENTER button to confirm your setting.The message “Enjoy your watching.” is displayed.If you want to reset this feature...1. Press the MENU button to display the menu.Press the or button to select “Setup”, then press the ENTER button.2. Press the ENTER button to select “Plug & Play”.3. This will change or reset the settings.Language: Select your language.Air/Cable: Select your local cable company TV system.Auto Program: Selects between terrestrial antenna connection or your local cable company TV system.The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two minutes. Clock Set: Sets the current time for the TV clock.You can also set the hour and minute by pressing the number buttons on the remote control.Viewing the DisplayThe on-screen displays disappear after about ten seconds.Press the button once more or wait approximately 10 seconds and it disappears automatically.Press the INFO button on the remote control to view current channel and the status of certain audio-video settings.Adjusting the Volume1.Press the VOL or VOL button to increase or decrease the volume. Using MUTE button:At any time, you can temporarily cut off the sound using the MUTE button.1.Press MUTE and the sound cuts off. The word “Mute” will appear in the lower-left corner of the screen.2.To turn mute off, press the MUTE button again, or simply press the VOL or VOL button.BN68-00860A-00Eng.qxd 7/19/05 1:52 PM Page 7
English-8Storing Channels ManuallyYou can store up to 100 channels, including those received via cable networks. 1. Use the number buttons to directly select the channel that will be added or deleted.2. Press the MENU button to display the menu.Press the or button to select “Channel”, then press the ENTER button.3. Press the or button to select “Add/Delete”.Press the ENTER button.4. Repeatedly pressing the ENTER button will alternate between add channel and delete channel.5. Press the CH or CH button to switch to the appropriate channel, then repeat above.6. Press the EXIT button to exit. You can view any channel (including an erased channel) by using the number buttons on the remote control.Use the number buttons to directly select the channel that will be added or erased. Press the ADD/DEL button on the remote control.Storing Channels AutomaticallyThe TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two minutes. 1. To select the signal source, follow the “Selecting the Video Signal-source” instructions number 1 to 3 on page 8. 2. Press the or button to select “Auto Program”. Press the ENTER button. 3. Press the ENTER button. The channel search will start and end automatically.Press the ENTER button at any time to interrupt the memorization process and return to the “Channel” menu.4. After all the available channels are stored, the “Channel” menu reappears. 5. Press the EXIT button to exit.Press the AUTO PROG. button on the remote control.Selecting the Video Signal-sourceBefore your television can begin memorizing the available channels, you must specify the type of signal source that isconnected to the TV (i.e. an antenna or a cable system).1. Press the MENU button to display the menu.Press the or button to select “Channel”, then press the ENTER button.2. Press the ENTER button to select “Air/Cable”.3. Press the or button to select the video signal source, then press the ENTER button.4. Press the EXIT button to exit.STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area.At this point, the signal source has been selected. Proceed to “Storing Channels Automatically”.BN68-00860A-00Eng.qxd 7/19/05 1:52 PM Page 8
English-9Using Automatic Picture Settings Your TV has four automatic picture settings (“Dynamic”, “Standard”, “Movie”, “Custom”) that are preset at the factory. Each Picture mode can be set to your preference by adjusting particular items such as Contrast, Brightness,Sharpness, Color, Tint and Color Tone.1. Press the MENU button to display the menu. Press the or button to select “Picture”, then press the ENTER button.2. Press the ENTER button again, to select “Mode”.3. Press the ENTER button again, to select “Mode”.4. Press the or button to select the desired picture effect.Press the ENTER button.5. Press the EXIT button to exit.Picture ControlCool2: Makes the color temperature bluer than “Cool1” menu.Cool1: Makes whites bluish.Normal: Keeps whites white.Warm1: Makes whites reddish.Warm2: Makes the color temperature redder than “Warm1” menu.Adjusting the Color ToneYou can Change the color of the entire screen according to your preference.1. To select the desired picture effect, follow the “Using Automatic Picture Settings ” instructions number 1 to 4 on page 9.2. Press the or button to select “Color Tone”, then press the ENTER button.3.Press theor buttonto select the desired color tone setting.Press theENTERbutton.4.Press the EXIT button to exit.Customizing the PictureYour set has several settings which allow you to control picture quality.1. To select the desired picture effect, follow the “Using Automatic Picture Settings ” instructions number 1 to 4 on page 9.3. Press the or button to select a particular item.Press the ENTER button.4. Press the or button to decrease or increase the value of a particular item. Press the ENTER button.5. Press the EXIT button to exit.The adjusted values are stored according to the selected Picture mode.The adjusted values are stored according to the selected Picture mode.Dynamic: Selects the picture for high-definition in a bright room.Standard: Selects the picture for optimum display in a normal environment.Movie: Selects the picture for comfortable display in a dark room.Custom: Select to view your favorite display settings (see “Customizing the Picture”, page 9).You can also press the P. M ODE button on the remote control to select one of the picture settings.The Picture mode must be adjusted separately for each input source.You can return to the factory defaults picture settings by selecting the “Reset”.(see “Resetting the Picture Settings to the Factory Defaults”, page 10).Contrast: Adjusts the lightness and darkness between objects and the background.Brightness: Adjusts the brightness of the whole screen.Sharpness:Adjusts the outline of objects to either sharpen them or make them more dull.Color: Adjusts the colors, making them lighter or darker.Tint:Adjusts the color of objects, making them more red or green for a more natural look.BN68-00860A-00Eng.qxd 7/19/05 1:52 PM Page 9
English-10Dynamic ContrastDynamic Contrast is to automatically detect distribution of inputted visual signal and adjust to create optimum contrast.1. Press the MENU button to display the menu. Press the or button to select “Picture”, then press the ENTER button.2. Press the or button to select “Dynamic Contrast”, then press the ENTER button.3. Press the or button to select “On” or “Off”.Press the ENTER button.4. Press the EXIT button to exit.This function don’t work in PC mode.Changing the Picture SizeYou can select the picture size which best corresponds to your viewing requirements.1. Press the MENU button to display the menu. Press the or button to select “Picture”, then press the ENTER button.2. Press the or button to select “Size”, then press the ENTER button.3. Select the required option by pressing the or button.Press the ENTER button.4. Press the EXIT button to exit.In PC Mode, only “16:9” and “4:3” mode can be adjusted.Select by pressing the or buttons. Use the or button to move the picture up and down. After selecting , use the or button to magnify or reduce the picture size in the vertical direction.16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.Panorama: Adjusts 16:9 to 4:3 in a natural way as for normal broadcasting.Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.4:3: This is the default setting for a video movie or normal broadcasting.Resetting the Picture Settings to the Factory DefaultsYou can return to the factory defaults picture settings.1. To select the desired picture effect, follow the “Using Automatic Picture Settings ” instructions number 1 to 4 on page 9.2. Press the or button to select “Reset”, then press the ENTER button.3. Press the EXIT button to exit.The “Reset” will be set for each picture mode.Setting the Digital Noise Reduction (Digital NR)If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to helpreduce any static and ghosting that may appear on the screen.1. Press the MENU button to display the menu. Press the or button to select “Picture”, then press the ENTER button.2. Press the or button to select “Digital NR”, then press the ENTER button.3. Press the or button to select “On” or “Off”.Press the ENTER button.4. Press the EXIT button to exit.This function don’t work in PC mode.BN68-00860A-00Eng.qxd 7/19/05 1:52 PM Page 10
English-11When the main picture is PC, the sub picture only supports TV, AV and S-VIDEO. The sub picture does not support other input sources in this case.You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.While V-Chip is in operation, the PIP function cannot be used.Viewing Picture-in-PictureThis product has one built-in tuner, which does not allow PIP to function in the same mode. For example, you cannotwatch one TV channel in the main screen, and a different one in the PIP screen. You can use the PIP feature to simultaneously watch two video sources.1. Press the MENU button to display the menu. Press the or button to select “Picture”, then press the ENTER button.2. Press the or button to select “PIP”, then press the ENTER button.3. Press the ENTER button.4. Press the or button to select “On”Press the ENTER button.PIP is available only in PC mode and will be unavailable for other modes.If you turn the TV off while watching in PIP mode and turn it on again, the PIP window will disappear.5. Press the or button to select “Source”, then press the ENTER button.6. Select the source of the sub picture (PIP) by pressing the or buttons and press the ENTER button.7. Press the or button to select “Position”, then press the ENTER button.8. Press the or buttons to select the desired PIP window position.Press the ENTER button.9. Press the or button to select “Channel”, then press the ENTER button.10. Press the or buttons to select the desired channel in the PIP window. Press the ENTER button.11. Press the EXIT button to exit.Source: Selecting a signal source (external A/V) for PIP.The sub picture can serve different source selections based on what the main picture is set to.Position: Changing the position of the PIP window.Channel: Changing the PIP channel.The channel can be active when the sub picture is set to TV.PIP Settings (O: PIP operates, X: PIP doesn’t operate)PCTVOAV1OAV2OS-VideoOComponent1XComponent2XPCXDVI XSubMainPress the PIP button on the remote control repeatedly to activate or deactivate the “PIP”.Using Automatic Sound SettingsYou can select the type of the special sound effect to be used when watching a given broadcast.1. Press the MENU button to display the menu. Press the or button to select “Sound”, then press the ENTER button.2. Press the ENTER button to select “Mode”.3. Press the or button to select the desired sound effect.Press the ENTER button.4. Press the EXIT button to exit.Sound ControlYou can also press the S.MODE button on the remote control to select one of the sound settings.Standard: Selects the normal sound mode.Music: Emphasizes music over voices.Movie: Provides live and full sound for movies.Speech: Emphasizes voices over other sounds.Custom: Selects your custom sound settings (See “Customizing the Sound”, page 12).BN68-00860A-00Eng.qxd 7/19/05 1:52 PM Page 11
English-12Mono: Select for channels that are broadcast in mono, or if you are having difficulty receiving a stereo signal.Stereo: Select for channels that are broadcast in stereo.Choosing a Multi-Channel Sound (MTS) SoundtrackDepending on the particular program being broadcast, you can listen to stereo, mono or a Separate Audio Program.(SAP audio is usually a foreign-language translation. Sometimes SAP has unrelated information like news or weather). 1. Press the MENU button to display the menu. Press the or button to select “Sound”, then press the ENTER button.2. Press the or button to select “MTS”, then press the ENTER button.3. Press the or button to select the required option, then press the ENTER button.4. Press the EXIT button to exit.You can also press the MTS button on the remote control to change the MTS settings.Using the Auto VolumeEach broadcasting station has its own signal conditions, and it is inconvenient to adjust the volume every time the channel is changed. “Auto Volume” automatically adjusts the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.1. Press the MENU button to display the menu. Press the or button to select “Sound”, then press the ENTER button.2. Press the or button to select “Auto Volume”, then press the ENTER button.3. Press the or button to select “On” or “Off”. Press the ENTER button.4. Press the EXIT button to exit.Listening to the Sound of the Sub PictureDuring the PIP feature is activating, you can listen to the sound of the sub picture.1. Press the MENU button to display the menu. Press the or button to select “Sound”, then press the ENTER button.2. Press the or button to select “Sound Select”, then press the ENTER button.3. Press the or button to select “Sub”. Press the ENTER button.4. Press the EXIT button to exit.Customizing the SoundThe sound settings can be adjusted to suit your personal preferences. (Alternatively, you can use one of the “automatic” settings.)1. Press the MENU button to display the menu. Press the or button to select “Sound”, then press the ENTER button.2. Press the or button to select “Equalizer”, then press the ENTER button.3. Press the or buttons to select a particular frequency to adjust. Press the or buttons to increase or decrease the level of the particular frequency. Press the ENTER button.4. Press the EXIT button to exit.If you make any changes to the “Equalizer” settings, the sound mode is automatically switched to the “Custom” mode.You can select this option when the “PIP” is set to “On”.Main: Used to listen to the sound of the main picture.Sub: Used to listen to the sound of the sub picture.BN68-00860A-00Eng.qxd 7/19/05 1:52 PM Page 12
English-13Setting the ClockYou can set the TV’s clock so that the current time is displayed when you press the INFO button. You must also setthe time if you wish to use the automatic On/Off timers.1. Press the MENU button to display the on-screen menu.Press the or button to select “Setup”, then press the ENTER button.2. Press the or button to select “Time”, then press the ENTER button.3. Press the ENTER button to select “Clock Set”.4. Press the or button to adjust “Hour”, then press the button to move to the next step.Set other items using the same method as above.When finished, press the ENTER button to return.5. Press the EXIT button to exit.If you disconnect the power cord, you have to set the clock again.You can also set the hour and minute by pressing the number buttons on the remote control.Time SettingSetting the Sleep TimerSetting the On/Off TimerSet the timer for the TV to turn off at the preset time automatically.1. Press the MENU button to display the on-screen menu.Press the or button to select “Setup”, then press the ENTER button.2. Press the or button to select “Time”, then press the ENTER button.3. Press the or button to select “Sleep Timer”, then press the ENTER button.4. Press the or button repeatedly until the desired time appears. (Off, 30, 60, 90, 120, 150, 180)Press theENTERbutton.5. Press the EXIT button to exit.The TV automatically turn off when the timer reaches 0. You can also press the SLEEP button on the remote control to set the sleep time.You can set the On/Off timers so that the set will:Switch on automatically and tune to the channel of your choice at the time you select.Switch off automatically at the time you select.1. Press the MENU button to display the on-screen menu.Press the or button to select “Setup”, then press the ENTER button.2. Press the or button to select “Time”, then press the ENTER button.3. Press the or button to select “On Timer”, then press the ENTER button.4. Press the or button to adjust “Hour”, then press the button to move to the next step.Set other items using the same method as above.When finished, press the ENTER button to return.5. Press the or button to select “Off Timer”, then press the ENTER button.6. Press the or button to adjust “Hour”, then press the button to move to the next step.Set other items using the same method as above. When finished, press the ENTER button to return.7. Press the EXIT button to exit.The clock must be set (see above) before you can set the On/Off timer.You can also set the hour and minute by pressing the number buttons on the remote control.The timers have to have the “Setup” settings set to “On” for them to work.Auto Power Off: When you set the timer on, your television will be turned off if you do not operate any controls for 3hours after the TV has been turned on with the “Timer On” function.BN68-00860A-00Eng.qxd 7/19/05 1:52 PM Page 13
Setting Up Your Personal ID Number (PIN):The V-Chip feature automatically locks out programming that is deemed inappropriate for children. The user must first enter a Pin (personal ID number) before any of the V-Chip restrictions can be set up or changed. 1. Press the MENU button to display the menu.Press the or button to select “Setup”, then press the ENTER button.2. Press the or button to select “V-Chip”, then press the ENTER button.3. The “Enter PIN” screen will appear. Enter your 4-digit PIN. The default PIN number for a new TV set is “0-0-0-0”.4. After entering a valid PIN number, the “V-Chip” screen will appear. Press the or button to select “Change PIN”. Press the ENTER button. 5. The Change PIN screen will appear. Choose any 4-digits for your PIN and enter them.As soon as the 4 digits are entered, the “Confirm new PIN” screen appears. Re-enter the same 4 digits. When the confirm screen disappears, your PIN has been memorized. 6. Press the EXIT button to exit. How to Enable/Disable the V-Chip:1. Press the MENU button to display the menu.Press the or button to select “Setup”, then press the ENTER button.2. Press the or button to select “V-Chip”, then press the ENTER button.3. The “Enter PIN” screen will appear. Enter your 4-digit PIN. 4. The “V-Chip” screen will appear, and “V-Chip Lock” will be selected. Press the ENTER button. 5. Press the or button to select “On” or “Off”. Press the ENTER button.7. Press the EXIT button to exit.How to Set up Restrictions Using the ‘TV guidelines’:First, set up a personal identification number (PIN), and enable the V-Chip. (See previous section.) Parental restrictions can be set up using either of two methods: The TV guidelines or the MPAA rating.1. Press the MENU button to display the menu.Press the or button to select “Setup”, then press the ENTER button.2. Press the or button to select “V-Chip”, then press the ENTER button.3. The “Enter PIN” screen will appear. Enter your 4-digit PIN. 4. Press the or button to select “TV Parental Guidelines”, then press the ENTER button.5. The “TV Parental Guidelines” screen will appear.Press the or button to select one of the six age-based categories:6. At this point, one of the TV-Ratings is selected. Press the ENTER button: Depending on your existing setup, the color of the letter “U” or “B” will be highlighted. (U= Unblocked, B= Blocked)When the color of the “U” or “B” is highlighted, press the ENTER button to block or unblock the category. A TV-Rating will be highlighted. To exit this screen, press MENU again. To select a different TV-Rating, press the or button and then repeat the process.The TV-Y7, TV-PG, TV-14, and TV-MA have additional options.See the next step to change any of the following sub-ratings:FV: Fantasy Violence / D; Sexual suggestive DialogL: Adult Language / S: Sexual situation / V: ViolenceThe V-Chip will automatically block certain categories that are “more restrictive.” For example, ifyou block “TV-Y” category, then TV-Y7 will automatically be blocked. Similarly, if you block the TV-G category, then all the categories in the “young adult” group will be blocked(TV-G, TV-PG, TV-14, and TV-MA). The sub-ratings (D, L, S, V) work together similarly.English-14Using the V-ChipFunction Description• TV-Y: Young children• TV-Y7: Children 7 and over• TV-G: General audience• TV-PG: Parental guidance• TV-14: Viewers 14 and over• TV-MA: Mature audienceBN68-00860A-00Eng.qxd 7/19/05 1:52 PM Page 14
English-157. How to set the FV, D, L, S, and V sub-ratings.First, highlight one of these TV-Ratings: TV-Y7, TV-PG, TV-14, or TV-MA(See Step 4, on previous page). Next, while the TV-Rating is selected, repeatedly press the ENTER button. This will cycle through the available sub-ratings (FV,L, S, D, or V).Ahighlighted letter (“U” or “B”) will be displayed for each sub-rating. While the “U” or “B” is highlighted,press the ENTER button to change the sub-rating.Press MENU once to save the TV guidelines. A TV-Rating will be selected, and no letters “U” or “B” will be changed to yellow. To exit this screen, press the MENU button again. To select a different TV-Rating, press the or button and then repeat the process.The V-chip will automatically block certain categories that are “More restrictive”. For example, if you block the “L” sub-rating in TV-PG, then the “L” sub-ratings in TV-14 andTV-MA will automatically be blocked.8. Press the EXIT button to clear all the screens.(Or proceed to the next section, and set up additional restrictions based on the MPAA codes).How to Set up Restrictions Using the MPAA Ratings: G, PG, PG-13, R, NC-17, X, NRThe MPAA rating system uses the Motion Picture Association of America (MPAA) system, and its main application isfor movies. When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA or TV-Ratings).1. Press the MENU button to display the menu.Press the or button to select “Setup”, then press the ENTER button.2. Press the or button to select “V-Chip”, then press the ENTER button.3. The “Enter PIN” screen will appear. Enter your 4-digit PIN. 4. Press the or button to select “MPAA Rating”, then press the ENTER button.5. Repeatedly press the or button to select a particular MPAA category. (When a category is selected, its color changes to yellow.) Pressing the or button will cycle through the MPAA categories:6. Press the or button to select a category.Press the ENTER button to select “U” or “B”. Press the EXIT button to save the settings and to clear all screens.The V-Chip will automatically block any category that is “more restrictive”. For example, if you block the “PG-13” category, then “R”, “NC-17”, and “X” will automatically be blocked also.How to Reset the TV after the V-Chip Blocks a Channel (‘Emergency Escape’)If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the following message will appear: “Excessive rating”. To resume normal viewing, tune to a different channel using the number buttons. Under certain conditions (depending on the rating of the local TV programs) the V-Chip might lock out allthe channels. In this case, use the Menu button for an “emergency escape”: Select the V-Chip on the Menu. Enter your PIN number, and press the ENTER button to temporarily disable the V-Chip Lock. How to Set up Restrictions Using the Canadian English1. Press the MENU button to display the menu.Press the or button to select “Setup”, then press the ENTER button.2. Press the or button to select “V-Chip”, then press the ENTER button.3. The “Enter PIN” screen will appear. Enter your 4-digit PIN. 4. Press the or button to select “Canadian English”, then press the ENTER button.5. Press the or button to select a appropriate restriction.Press the ENTER button to activate the restriction selected. The “B” is indicated.6. Press the EXIT button to exit.• G: General audience (no restrictions).• PG: Parental guidance suggested.• PG-13: Parents strongly cautioned.• R: Restricted. Children under 17 should be accompanied by an adult.• NC-17: No children under age 17. • X: Adults only.• NR: Not rated.• E: Exempt programming includes...news, sports, documentaries and other information programming, talk shows, music videos, and variety programming.• C: Programming intended for children under age 8.• C8+: Programming generally considered acceptable for children 8 years and over to watch on their own.• G: General programming, suitable for all audiences.• PG: Parental Guidance.• 14+: Programming contains themes or content which may not be suitable for viewers under the age of 14.• 18+: Adult programming.BN68-00860A-00Eng.qxd 7/19/05 1:52 PM Page 15
English-16How to Set up Restrictions Using the Canadian French1. Press the MENU button to display the menu.Press the or button to select “Setup”, then press the ENTER button.2. Press the or button to select “V-Chip”, then press the ENTER button.3. The “Enter PIN” screen will appear. Enter your 4-digit PIN. 4. Press the or button to select “Canadian French”, then press the ENTER button.5. Press the or button to select a appropriate restriction.Press the ENTER button to activate the restriction selected. The “B” is indicated.6. Press the EXIT button to exit.Viewing Closed CaptionsYour TV decodes and displays the closed captions that are broadcast with certain TV shows. These captions are usually subtitles for the hearing impaired or foreign-language translations. All VCRs record the closed caption signal from television programs, so home-recorded video tapes also provideclosed captions. Most pre-recorded commercial video tapes provide closed captions as well. Check for the closed caption symbol in your television schedule and on the tape’s packaging: . 1. Press the MENU button to display the on-screen menu.Press the or button to select “Setup”, then press the ENTER button.2. Press the or button to select “Caption”, then press the ENTER button.3. Press the ENTER button to select “Caption”.4. Press the or button to set caption “Off” or “On”, then press the ENTER button.5. Depending on the particular broadcast, it might be necessary to make changes to“Channel” and “Field”.6. Press the EXIT button to exit. Caption: Off / OnMode: Caption / TextChannel: 1 / 2Field: 1 / 2The Caption feature does not work with DVD or Set-top box signals.Different channels and fields display different information: Field 2 carries additional information that supplements the information in Field 1. (For example, Channel 1 may have subtitles in English, while Channel 2 has subtitles in Spanish).Press the CAPTION button on the remote control.• E: Exempt programming includes...news, sports, documentaries and other information programming, talk shows, music videos, and variety programming.• G: General.• 8 ans+: 8+ General-Not recommended for young children.• 13 ans+: Programming may not be suitable for children under the age of 13.• 16 ans+: Programming is not suitable for children under the age of 16.• 18 ans+: Programming restricted to adults.Selecting a Menu Language1. Press the MENU button to display the menu.Press the or button to select “Setup”, then press the ENTER button.2. Press the or button to select “Language”.Press the ENTER button.3. Press the or button to select the appropriate language.Press the ENTER button.4. Press the EXIT button to exit.BN68-00860A-00Eng.qxd 7/19/05 1:52 PM Page 16
English-17Using the Energy Saving FeatureThis feature adjusts the screen brightness automatically depending on the surrounding lighting conditions.1. Press the MENU button to display the on-screen menu.Press the or button to select “Setup”, then press the ENTER button.2. Press the or button to select “Energy Saving”, then press the ENTER button.3. Select the required option (Off, Low, Medium, High) by pressing the or button.Press the ENTER button.4. Press the EXIT button to exit.Selecting the SourceYou can select among external sources connected to your TV's input jacks.1. Press the MENU button to display the on-screen menu.Press the ENTER button to select “Input”.2. Press the ENTER button to select the “Source List”.3. Press the or button to select the Input source, then press ENTER button.You can only select a source if it is connected to your TV.Editing the Input Source NameYou can name the input device connected to the input jacks to make your input source selection easier.1. Press the MENU button to display the menu.Press the ENTER button to select “Input”.2. Press the or button to select “Edit Name” then press the ENTER button.3. Press the or button to select the desired input device, then press the ENTER button.4. Press the or button repeatedly until the appropriate source name appears.After the source is selected, press the ENTER button.The following options are available:---- - VCR - DVD - Cable STB - HD STB - Satellite STB - AV Receiver - DVD Receiver - Game - Camcorder - DVD Combo - DHR - PCDHR: DVD HDD Recorder5. Press the EXIT button to exit.You can also press the SOURCE button on the remote to choose the Input source.Setting the Blue Screen ModeIf no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue Screen” mode to “Off”.1. Press the MENU button to display the on-screen menu.Press the or button to select “Setup”, then press the ENTER button.2. Press the or button to select “Blue Screen”, then press the ENTER button.3. Press the or button to select “On” or “Off”. Press the ENTER button.4. Press the EXIT button to exit.Selecting the MelodyYou can hear melody sound when the television is powered on or off.1. Press the MENU button to display the on-screen menu.Press the or button to select “Setup”, then press the ENTER button.2. Press the or button to select “Melody”, then press the ENTER button.3. Press the or button to select “On” or “Off”. Press the ENTER button.4. Press the EXIT button to exit.BN68-00860A-00Eng.qxd 7/19/05 1:52 PM Page 17
English-18Setting the PCImage Lock:The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone, then adjust the frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the center of screen.1. Preset: Press the SOURCE button to select PC mode.2. Press the MENU button to display the menu.Press the or button to select “Setup”, then press the ENTER button.3. Press the or button to select “PC”, then press the ENTER button.4. Press the ENTER button to select “Image Lock”.5. Press the or button to select “Coarse” or “Fine”, then press the ENTER button. 6. Press the or button to adjust the screen quality, vertical stripes may appear or the picture may be blurry. Press the ENTER button.7. Press the EXIT button to exit.Position:Adjust the PC’s screen positioning if it does not fit the TV screen.1. Preset: Press the SOURCE button to select PC mode.2. Press the MENU button to display the menu.Press the or button to select “Setup”, then press the ENTER button.3. Press the or button to select “PC”, then press the ENTER button.4. Press the or button to select “Position”, then press the ENTER button.5. Press the or button to adjust the V-Position (Vertical-Position).Press the or button to adjust the H-Position (Horizontal-Position).Press the ENTER button.6. Press the EXIT button to exit.Image Reset:You can replace all image settings with the factory default values.1. Preset: Press the SOURCE button to select PC mode.2. Press the MENU button to display the menu.Press the or button to select “Setup”, then press the ENTER button.3. Press the or button to select “PC”, then press the ENTER button.4. Press the or button to select “Image Reset”, then press the ENTER button.5. Press the EXIT button to exit.Setting Up Your PC Software (Based on Windows XP)The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different, depending upon your particular version of Windowsand your particular video card. If your actual screen looks different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)1. First, click on “Control Panel” on the Windows start menu.2. When the control panel window appears, click on “Appearance and Themes” and a display dialog-box will appear.3. When the control panel window appears, click on “Display” and a display dialog-box will appear.4. Navigate to the “Settings” tab on the display dialog-box.The correct size setting (resolution): Optimum- 1360 X 768If a vertical-frequency option exists on your display settings dialog box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.PC DisplayBN68-00860A-00Eng.qxd 7/19/05 1:52 PM Page 18
English-19TroubleshootingAuto Adjustment:Auto adjustment allows you to set the TV to self-adjust to the incoming PC video signal. The fine, coarse and position values are adjusted automatically.1. Preset: Press the SOURCE button to select PC mode.2. Press the MENU button to display the menu.Press the or button to select “Setup”, then press the ENTER button.3. Press the or button to select “PC”, then press the ENTER button.4. Press the or button to select “Auto Adjustment”, then press the ENTER button.5. Press the EXIT button to exit.Identifying ProblemsIf the TV seems to have a problem, first try this list of possible problems and solutions.If none of these troubleshooting tips apply, call your nearest Samsung service center.ProblemPoor picturePoor sound quality.No picture or sound.No sound or sound is too low atmaximum volume.Picture rolls vertically.The TV operates erratically.Remote controlmalfunctions“Check signal cable. PC”message.“Not Optimum Mode RecommendedMode1024x768 60Hz” message.The image is too light or too dark.Horizontal bars appear to flicker, jitter or shimmer on the image.Possible SolutionTry another channel.Adjust the antenna.Check all wire connections.Try another channel.Adjust the antenna.Try another channel.Press the SOURCE button.Make sure the TV is plugged in.Check the antenna connections.First, check the volume of units connected to your TV (Digital broadcasting receiver, DTV, DVD, cable broadcasting receiver, VCR, etc.). Then, adjust the TV volume accordingly.Check all wire connections.Unplug the TV for 30 seconds, then try operating it again.Replace the remote control batteries.Clean the upper edge of the remote control (transmission window).Check the battery terminals.Ensure that the signal cable is firmly connected to the PC sources.Check the maximum resolution and the frequency of the Video Adapter.Compare these values with the data in the Display Modes.Adjust the Brightness and Contrast.Adjust the Coarse tuning and then adjust the Fine tuning.BN68-00860A-00Eng.qxd 7/19/05 1:52 PM Page 19
English-20Specifications Model NamePanelSizeDisplay SizeFrequencyHorizontalVerticalPC ResolutionOptimumPower SupplyPower ConsumptionNormalPower SavingDimension (WxDxH)BodyWith standWeightWith standEnvironmental ConsiderationsOperating TemperatureOperating HumidityStorage TemperatureStorage HumiditySoundOutput StereoLN-R2355W23” Diagonal (16:9)20.01(H) x 11.25(V) inches(508.13(H) x 285.70(V) mm)30~61kHz60~75Hz1360x768 @ 60 HzAC 110~120V, 60 Hz120 W< 2.0 W26.61 x 3.35 x 15.49 inches(675.9 x 85.0 x 393.4 mm)26.61x 8.02 x 17.30 inches(675.9 x 203.8 x 439.5 mm) 17.64 lbs (8.0 kg)50 °F to 104 °F (10 °C to 40 °C)10% to 80%, non-condensing-4 °F to 113 °F (-20 °C to 45 °C)5% to 95%, non-condensing3W X 2StereoLN-R2755W27” Diagonal (16:9)23.75(H) x 13.46(V) inches(603.22(H) x 341.98(V) mm)30~61kHz60~75Hz1360x768 @ 60 HzAC 110~120V, 60 Hz130 W< 2.0 W30.18 x 3.78 x 18.07 inches(766.5 x 96.0 x 459.0 mm)30.18 x 6.02 x 19.90 inches(766.5 x 203.8 x 505.5mm) 26.46 lbs (12.0 kg)50 °F to 104 °F (10 °C to 40 °C)10% to 80%, non-condensing-4 °F to 113 °F (-20 °C to 45 °C)5% to 95%, non-condensing5W X 2StereoLN-R3255W32” Diagonal (16:9)24.47(H) x 15.44(V) inches(697.68(H) x 392.26(V) mm)30~61kHz60~75Hz1360x768 @ 60 HzAC 110~120V, 60 Hz160 W< 2.0 W36.00 x 4.09 x 20.82 inches(914.5 x 104.0 x 528.8 mm)36.00 x 9.74 x 23.29 inches(914.5 x 247.5 x 591.5 mm) 33.07 lbs (15.0 kg)50 °F to 104 °F (10 °C to 40 °C)10% to 80%, non-condensing-4 °F to 113 °F (-20 °C to 45 °C)5% to 95%, non-condensing7.5W X 2StereoDisplay ModesBoth screen position and size will vary depending on the type of PC monitor and its resolution.The resolutions in the table are recommended. (All resolutions between the supported limits are supported)ModeIBMVEASResolution640 x 480720 x 400640 x 480640 x 480800 x 600800 x 600800 x 6001024 x 7681024 x 7681024 x 7681360 x 768HorizontalFrequency (kHz)31.46931.46937.86137.50037.87948.07746.87548.36456.47660.02347.712VerticalFrequency (Hz)59.94070.08772.80975.00060.31772.18875.00060.00070.06975.02960.015Pixel ClockFrequency (MHz)25.17528.32231.50031.50040.00050.00049.50065.00075.00078.75085.800Sync Polarity(H/V)- / -- / +- / -- / -+ /++ /++ /+- / -- / -+ /++ /+The interlace mode is not supported.The set might operate abnormally if a non-standard video format is selected.DVI dose not support PC function.Separate and Composite modes are supported. SOG is not supported.AppendixBN68-00860A-00Eng.qxd 7/19/05 1:52 PM Page 20

Navigation menu