| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2575599 |
| Application ID | 0MMFWhfMJkm+oTnPCb3yeg== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 417.1kB (5213728 bits) |
| Date Submitted | 2015-04-05 00:00:00 |
| Date Available | 2015-04-06 00:00:00 |
| Creation Date | 2015-03-16 17:42:05 |
| Document Lastmod | 2015-04-01 10:03:12 |
| Document Title | user manual |
User Manual
U24E850R
U28E850R
The color and the appearance may differ depending on
the product, and the specifications are subject to
change without prior notice to improve the performance.
BN46-00482A-X3
Table Of Contents
BEFORE USING THE
PRODUCT
PREPARATIONS
CONNECTING AND USING
A SOURCE DEVICE
Copyright
Icons used in this manual
Cleaning
Securing the Installation Space
Precautions for storage
10
Safety Precautions
10
11
12
14
Symbols for safety precautions
Electricity and Safety
Installation and Safety
Operation
17
Correct posture to use the product
18
Checking the Contents
18
Checking the Components
19
Parts
19
21
Frontal Button
Reverse Side
25
Installation
25
26
28
29
29
30
Removing the Stand
Installing the Wall Mount
Installing a Wall-mount Kit or Desktop Stand
Adjusting the Product Tilt and Height
Rotating the Monitor Screen
Anti-theft Lock
31
"MagicRotation Auto"
32
Rotating the monitor
33
Before Connecting
33
Pre-connection Checkpoints
Table Of Contents
Table Of Contents
SCREEN SETUP
33
Connecting and Using a PC
33
35
35
36
37
37
Connection Using the HDMI Cable
Connection Using the DP Cable
Connection Using the MINI DP Cable
Connecting to Headphones
Connecting the Power
Tidying Up the Connected Cables
38
Connecting the Product to a PC as a
USB HUB
38
38
Connecting a PC to the Product
Utilizing the Product as a USB HUB
40
Driver Installation
41
Setting Optimum Resolution
42
SAMSUNG MAGIC Bright
42
Configuring SAMSUNG MAGIC Bright
45
Brightness
45
Configuring Brightness
46
Contrast
46
Configuring Contrast
47
Sharpness
47
Configuring Sharpness
48
Color
48
Configuring Color
50
SAMSUNG MAGIC Angle (U28E850R)
50
Configuring SAMSUNG MAGIC Angle
52
HDMI Black Level
52
Configuring the HDMI Black Level Settings
53
Eye Saver Mode
53
Configuring Eye Saver Mode
Table Of Contents
Table Of Contents
54
Game Mode
54
Configuring Game Mode
56
Response Time
56
Configuring the Response Time
57
Picture Size
57
Changing the Picture Size
59
Screen Adjustment
59
Configuring H-Position & V-Position
CONFIGURING THE PIP/
PBP SETTINGS
60
PIP/PBP
62
63
64
65
66
70
74
Configuring PIP/PBP Mode
Configuring Size
Configuring Position
Configuring Sound Source
Configuring Source
Configuring Picture Size
Configuring Contrast
COORDINATING OSD
76
Transparency
76
Changing Transparency
77
Language
77
Configuring Language
78
Display Time
78
Configuring Display Time
79
FreeSync (U24E850R)
79
Configuring FreeSync
81
Smart Eco Saving
81
Configuring Smart Eco Saving
82
Off Timer Plus
82
84
Configuring Off Timer
Configuring Eco Timer
SETUP AND RESET
Table Of Contents
Table Of Contents
86
USB Super Charging
86
Configuring USB Super Charging
87
PC/AV Mode
87
Configuring PC/AV Mode
89
DisplayPort Ver.
89
Configuring DisplayPort Ver.
90
Source Detection
90
Configuring Source Detection
91
Key Repeat Time
91
Configuring Key Repeat Time
92
Reset All
92
Initializing Settings (Reset All)
93
Information
93
Displaying Information
94
Configuring Brightness, Contrast and
Volume from the Initial Screen
INSTALLING THE
SOFTWARE
95
Easy Setting Box
95
96
Installing the Software
Removing the Software
TROUBLESHOOTING
GUIDE
97
Requirements Before Contacting
Samsung Customer Service Center
97
97
97
Testing the Product
Checking the Resolution and Frequency
Check the following.
100
Q&A
102
General
104
PowerSaver
105
Standard Signal Mode Table
INFORMATION MENU AND
OTHERS
SPECIFICATIONS
Table Of Contents
Table Of Contents
APPENDIX
110
Contact SAMSUNG WORLD WIDE
119
Responsibility for the Pay Service (Cost
to Customers)
119
119
119
Not a product defect
A Product damage caused by customer's fault
Others
120
Correct Disposal
120
Correct Disposal of This Product (Waste
Electrical & Electronic Equipment)
120
Extended warranty
121
Terminology
INDEX
Table Of Contents
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality.
2015 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is
prohibited.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
ďŹ
An administration fee may be charged if either
ďŻ
(a) an engineer is called out at your request and there is no defect in the product.
(i.e. where you have failed to read this user manual)
ďŻ
(b) you bring the unit to a repair center and there is no defect in the product.
(i.e. where you have failed to read this user manual)
ďŹ
The amount of such administration charge will be advised to you before any work or home visit
is carried out.
Icons used in this manual
The following images are for reference only. Real-life situations may
differ from what is shown in the images.
Before Using the Product
Before Using the Product
Cleaning
Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched.
Take the following steps when cleaning.
1. Power off the monitor and computer.
2. Disconnect the power cord from the monitor.
Hold the power cable by the plug and do not touch the cable with wet
hands. Otherwise, an electric shock may result.
3. Wipe the monitor with a clean, soft and dry cloth.
ďŹ
Do not apply a cleaning agent that contains alcohol,
solvent, or surfactant to the monitor.
ďŹ
Do not spray water or detergent directly on the product.
4. Wet a soft and dry cloth in water and wring thoroughly to clean the
exterior of the monitor.
5. Connect the power cord to the product after cleaning the product.
6. Power on the monitor and computer.
Before Using the Product
Before Using the Product
Securing the Installation Space
Ensure some space around the product for ventilation. An internal temperature rise may cause fire and
damage the product. Be sure to allow the amount of space as shown below or greater when installing
the product.
The exterior may differ depending on the product.
3.93 inches
(10 cm)
3.93 inches (10 cm)
3.93
inches
(10 cm)
3.93
inches
(10 cm)
3.93 inches (10 cm)
Precautions for storage
Be sure to contact Samsung Customer Service Center (page 110) if the inside of the monitor needs
cleaning. (Service fee will be charged.)
Before Using the Product
Before Using the Product
Safety Precautions
Caution
RISK OF ELECTRIC SHOCK DO NOT OPEN
Caution: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR
BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO
QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present inside. It is dangerous to
make any kind of contact with any internal part of this product.
This symbol alerts you that important literature concerning operation and
maintenance has been included with this product.
Symbols for safety precautions
Warning
A serious or fatal injury may result if instructions are not followed.
Caution
Personal injury or damage to properties may result if instructions are
not followed.
Activities marked by this symbol are prohibited.
Instructions marked by this symbol must be followed.
Before Using the Product
10
Before Using the Product
Electricity and Safety
The following images are for reference only. Real-life situations may differ from what is shown in the
images.
Warning
Do not use a damaged power cord or plug, or a loose power socket.
ďŹ
An electric shock or fire may result.
Do not plug many products into the same power socket.
ďŹ
Otherwise, the socket may overheat and cause a fire.
Do not touch the power plug with wet hands.
ďŹ
Otherwise, an electric shock may result.
Insert the power plug all the way in so it is not loose.
ďŹ
An unstable connection may cause a fire.
Connect the power plug to a grounded power socket (type 1 insulated devices
only).
ďŹ
An electric shock or injury may result.
Do not bend or pull the power cord with force. Do not weigh the power cord
down with a heavy object.
ďŹ
A damaged power cord may cause an electric shock or fire.
Do not place the power cord or product near heat sources.
ďŹ
An electric shock or fire may result.
Remove foreign substances such as dust around the plug pins and power socket
with a dry cloth.
ďŹ
Otherwise, a fire may result.
Before Using the Product
11
Before Using the Product
Caution
Do not unplug the power cord when the product is in use.
ďŹ
The product may become damaged by an electric shock.
Do not use the power cord for products other than authorized products supplied
by Samsung.
ďŹ
An electric shock or fire may result.
Keep the power socket where the power cord is connected unobstructed.
ďŹ
If any problem occurs in the product, unplug the power cable to completely
cut the power to the product.
Power to the product cannot be completely cut off with the power button.
Hold the plug when disconnecting the power cord from the power socket.
ďŹ
An electric shock or fire may result.
Installation and Safety
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP
OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
ďŹ
Otherwise, a fire may result.
Avoid installing the product in a narrow space with bad ventilation, such as a
bookshelf or wall closet.
ďŹ
Otherwise, a fire may result due to an increased internal temperature.
Keep the plastic packaging bag for the product in a place that cannot be reached
by children.
ďŹ
Children may suffocate.
Before Using the Product
12
Before Using the Product
Do not install the product on an unstable or vibrating surface (insecure shelf,
sloped surface, etc.).
ďŹ
The product may fall and break or cause a personal injury.
ďŹ
Using the product in an area with excess vibration may damage the product
or cause a fire.
Do not install the product in a vehicle or a place exposed to dust, moisture (water
drips, etc.), oil, or smoke.
ďŹ
An electric shock or fire may result.
Do not expose the product to direct sunlight, heat, or a hot object such as a
stove.
ďŹ
Otherwise, the product lifespan may be reduced, or a fire may result.
Do not install the product within the reach of young children.
ďŹ
The product may fall and injure children.
Edible oil, such as soybean oil, can damage or deform the product. Do not install
the product in a kitchen or near a kitchen counter.
Caution
Take care not to drop the product when moving it.
ďŹ
Otherwise, product failure or personal injury may result.
Do not set down the product on its front.
ďŹ
The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the bottom
edge of the front of the product is not protruding.
ďŹ
The product may fall and break or cause a personal injury.
ďŹ
Install the product only on cabinets or shelves of the right size.
Before Using the Product
13
Before Using the Product
Put down the product carefully.
ďŹ
The product may fall and break or cause a personal injury.
SAMSUNG
Installing the product in an unusual place (a place exposed to a lot of fine dust,
chemical substances, extreme temperatures or a significant presence of
moisture, or a place where the product will operate continuously for an extended
period of time) may seriously affect its performance.
ďŹ
Be sure to consult Samsung Customer Service Center (page 110) before
installation if you want to install the product at such a place.
Operation
Warning
High voltage runs through the product. Do not attempt to disassemble, repair, or
modify the product on your own.
ďŹ
An electric shock or fire may result.
ďŹ
Contact Samsung Customer Service Center (page 110) for repair.
To move the product, first disconnect all the cables from it, including the power
cable.
ďŹ
Otherwise, the power cord may be damaged and a fire or electric shock may
result.
If the product generates a strange noise, a burning smell, or smoke, remove the
power cord immediately and contact Samsung Customer Service Center
(page 110).
ďŹ
An electric shock or fire may result.
Do not let children hang from the product or climb on top of it.
ďŹ
The product may fall, and your child may become injured or seriously
harmed.
If the product falls or the exterior is damaged, power off the product, remove the
power cord, and contact Samsung Customer Service Center (page 110).
ďŹ
Otherwise, an electric shock or fire may result.
Do not put a heavy object, toy, or sweets on top of the product.
ďŹ
The product or heavy objects may fall as children try to reach for the toy or
sweets resulting in a serious injury.
Before Using the Product
14
Before Using the Product
During a lightning or thunderstorm, power off the product and remove the power
cable.
ďŹ
An electric shock or fire may result.
Do not drop objects on the product or apply impact.
ďŹ
An electric shock or fire may result.
Do not move the product by pulling the power cord or any cable.
ďŹ
Otherwise, the power cable may be damaged and product failure, an electric
shock or fire may result.
If a gas leakage is found, do not touch the product or power plug. Also, ventilate
the area immediately.
GAS
ďŹ
Sparks can cause an explosion or fire.
Do not lift or move the product by the power cord or any cable.
ďŹ
Otherwise, the power cable may be damaged and product failure, an electric
shock or fire may result.
Do not use or keep combustible spray or an inflammable substance near the
product.
ďŹ
An explosion or fire may result.
Ensure the vents are not blocked by tablecloths or curtains.
ďŹ
100
Otherwise, a fire may result from an increased internal temperature.
Do not insert a metallic object (a chopstick, coin, hair pin, etc.) or inflammable
object (paper, match, etc.) into the vent or ports of the product.
ďŹ
If water or any foreign substance enters the product, be sure to power off the
product, remove the power cord, and contact Samsung Customer Service
Center (page 110).
ďŹ
Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic
objects on top of the product.
ďŹ
If water or any foreign substance enters the product, be sure to power off the
product, remove the power cord, and contact Samsung Customer Service
Center (page 110).
ďŹ
Product failure, an electric shock or fire may result.
Before Using the Product
15
Before Using the Product
Caution
Leaving the screen fixed on a stationary image for an extended period of time
may cause afterimage burn-in or defective pixels.
ďŹ
If you are not going to use the product for an extended period of time,
activate power-saving mode or a moving-picture screen saver.
-_!
Disconnect the power cord from the power socket if you do not plan on using the
product for an extended period of time (vacation, etc).
ďŹ
Otherwise, a fire may result from accumulated dust, overheating, an electric
shock, or electric leakage.
Use the product at the recommended resolution and frequency.
ďŹ
Your eyesight may deteriorate.
Looking at the screen too close for an extended period of time can deteriorate
your eyesight.
Do not hold the monitor upside-down or move it by holding the stand.
ďŹ
The product may fall and break or cause a personal injury.
Do not use humidifiers or stoves around the product.
ďŹ
An electric shock or fire may result.
Rest your eyes for more than 5 minutes for every 1 hour of product use.
ďŹ
Eye fatigue will be relieved.
Do not touch the screen when the product has been turned on for an extended
period of time as it will become hot.
Store the small accessories used with the product out of reach of children.
Before Using the Product
16
Before Using the Product
Exercise caution when adjusting the product angle or stand height.
ďŹ
Otherwise, children's fingers or hands may become stuck and injured.
ďŹ
Tilting the product excessively may cause it to fall and result in personal
injury.
Do not place heavy objects on the product.
ďŹ
Product failure or personal injure may result.
When using headphones or earphones, do not turn the volume too high.
ďŹ
Having the sound too loud may damage your hearing.
Correct posture to use the product
Use the product in the correct posture as follows:
50 cm
ďŹ
Straighten your back.
ďŹ
Allow a distance of 45 to 50 cm between your eye and the screen, and look slightly
downward at the screen.
Keep your eyes directly in front of the screen.
ďŹ
Adjust the angle so light does not reflect on the screen.
ďŹ
Keep your forearms perpendicular to your upper arms and level with the back of
your hands.
ďŹ
Keep your elbows at about a right angle.
ďŹ
Adjust the height of the product so you can keep your knees bent at 90 degrees or
more, your heels attached to the floor, and your arms lower than your heart.
Before Using the Product
17
1
1.1
Preparations
Checking the Contents
1.1.1 Checking the Components
ďŹ
Contact the dealer from whom you purchased the product if any item is missing.
ďŹ
The appearance of the components may differ from the images shown.
Components
Quick Setup Guide
Warranty card
(Not available in some locations)
Regulatory guide
(optional)
User manual (optional)
Power cable
HDMI cable (optional)
DP cable (optional)
MINI DP cable (optional)
USB 3.0 cable (optional)
ďŹ
Components may vary depending on the country.
ďŹ
Recommend to use the HDMI cable and DP cable which is provided by the supplier.
ďŹ
The optimal resolution may not be available when using a non-high speed HDMI or
HDMI-DVI cable.
ďŹ
To ensure that the screen displays properly and sound can be normal output, using a standard DP,
MINI DP or HDMI cable is recommended. The DP, MINI DP and HDMI cables must support a
resolution of 3840 x 2160 at 60 Hz. (U24E850R)
ďŹ
To ensure that the screen displays properly and sound can be normal output, using a DP or MINI
DP cable that supports 3840 x 2160 @ 60 Hz is recommended. An HDMI cable that supports
3840 x 2160 @ 30 Hz will work when connect with HDMI 1. An HDMI cable that supports 3840 x
2160 @ 60 Hz will work when connect with HDMI 2. (U28E850R)
1 Preparations
18
1
1.2
Preparations
Parts
1.2.1 Frontal Button
The color and shape of parts may differ from what is shown.
Specifications are subject to change without notice to improve quality.
Function Key Guide
MENU
MENU
EYE
SAVER
SOURCE
EYE
SAVER
SOURCE
PIP/PBP
PIP/PBP
Icons
Description
Open or close the onscreen display (OSD) menu, or return to the parent
menu.
ďŹ
OSD control lock: Maintain the current settings, or lock the OSD
control to prevent unintended changes to settings.
ďŹ
Enable: To lock the OSD control, press and hold the [
] button for
10 seconds.
ďŹ
Disable: To unlock the OSD control, press and hold the [
] button
for 10 seconds.
If the OSD control is locked,
Brightness, Contrast and Volume can be adjusted.
PIP/PBP and Eye Saver Mode are available. Information can be
viewed.
Select [
] to display and access the following menu items.
Press to enable or disable Eye Saver Mode.
The items below are not available if the Eye Saver Mode function is
enable.
ďŹ
PICTURE
ďŹ
COLOR
ďŹ
System
SAMSUNG
Game Mode, MAGIC
Bright,
SAMSUNG
MAGIC Angle,
Brightness
Smart Eco Saving
1 Preparations
19
1
Preparations
Icons
Description
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
Adjust the screen brightness, contrast and volume.
Confirm a menu selection.
Pressing the [
] button when the OSD menu is not displayed will
change the input source U24E850R (DisplayPort/MINI DP/HDMI),
U28E850R (DisplayPort/MINI DP/HDMI 1/HDMI 2). If you power on the
product or change the input source by pressing the [
] button, a
message that shows the changed input source will appear at the top left
corner of the screen.
Press the button when configuring settings for the PIP/PBP function is
required.
Turn the screen on or off.
When a control button on the product is pressed, the Function Key Guide
will be displayed before the onscreen menu opens.
(The guide shows the function of the button pressed.)
Function Key Guide
To access the onscreen menu when the guide is displayed, press the
corresponding button again.
The Function Key Guide may vary depending on the function or product
model.
Refer to the actual product.
1 Preparations
20
1
Preparations
1.2.2 Reverse Side
The color and shape of parts may differ from what is shown.
Specifications are subject to change without notice to improve quality.
U24E850R
Port
Description
Connect the power cord for your monitor to the [POWER IN] port on
the back of the product.
Connect to a source device using an HDMI cable.
Connects to a PC using a DP cable.
Connects to a PC using a MINI DP cable.
1 Preparations
21
1
Preparations
Port
Description
Connect to a USB device.
High-speed charging is possible using the [
1] and [
2]
ports only. These ports charge devices faster than typical USB
ports. The speed depends on the connected devices.
Connects to a PC using a USB cable. Compatible with a USB cable
version 3.0 or lower.
This port can only connect to a PC.
Connect to an audio output device such as headphones.
1 Preparations
22
1
Preparations
U28E850R
Port
Description
Connect the power cord for your monitor to the [POWER IN] port on
the back of the product.
Connect to a source device using an HDMI cable.
HDMI 1 support 3840 x 2160 @ 30 Hz
HDMI 2 support 3840 x 2160 @ 60 Hz
Connects to a PC using a DP cable.
Connects to a PC using a MINI DP cable.
Connect to a USB device.
High-speed charging is possible using the [
1] and [
2]
ports only. These ports charge devices faster than typical USB
ports. The speed depends on the connected devices.
1 Preparations
23
1
Preparations
Port
Description
Connects to a PC using a USB cable. Compatible with a USB cable
version 3.0 or lower.
This port can only connect to a PC.
Connect to an audio output device such as headphones.
1 Preparations
24
1
1.3
Preparations
Installation
1.3.1 Removing the Stand
ďŹ
The color and shape of parts may differ from what is shown.
Specifications are subject to change without notice to improve quality.
ďŹ
Power the product off and remove the power cable from the power socket.
Place a protective cloth or
cushion on a flat surface. Next,
place the product with the face
down on top of the cloth or
cushion.
Unfasten the screw from the
back of the product.
Lift and detach the stand.
Do not put the hand below the
stand body.
Do not hold the product upside
down only by the stand.
- Caution
Do not place your hands in the
swiveling area.
1 Preparations
25
1
Preparations
1.3.2 Installing the Wall Mount
Installing the Wall Mount Kit
The wall mount kit allows you to mount the product on the wall.
Purchase a compatible wall-mount kit to use with the product.
For detailed information on installing the wall mount, see the
instructions provided with the wall mount.
We recommend you contact a technician for assistance when
installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the
product or injury to yourself or others if you elect to install the
wall mount on your own.
1 Preparations
26
1
Preparations
Wall Mount Kit Specifications (VESA)
Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to
surfaces other than plaster board, please contact your nearest dealer for additional information.
If you install the product on a slanted wall, it may fall and result in severe personal injury.
Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are
provided.
ďŹ
For wall mounts that do not comply with the VESA standard
screw specifications, the length of the screws may differ
depending on the wall mount specifications.
ďŹ
Do not fasten the screws too firmly. This may damage the
product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
ďŹ
Samsung is not liable for product damage or personal injury
when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
ďŹ
Do not mount the product at more than a 15 degree tilt.
ďŹ
Always have two people mount the product on a wall.
ďŹ
Standard dimensions for wall mount kits are shown in the table
below.
Unit: mm (inches)
Model name
VESA screw hole
specs (A * B) in
millimeters
Standard Screw
Quantity
100 x 100 (3.9 x 3.9)
M4
U24E850R
U28E850R
Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to
electric shock.
1 Preparations
27
1
Preparations
1.3.3 Installing a Wall-mount Kit or Desktop Stand
U24E850R / U28E850R
Attach the wall-mount kit or desktop stand here
Wall-mount bracket (optional)
Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding
parts on the wall-mount kit or desktop stand you want to attach.
Notes
ďŹ
Using a screw longer than the standard length can damage the internal components of the
product.
ďŹ
The length of screws required for a wall mount that does not comply with the VESA standards may
vary depending on the specifications.
ďŹ
Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit
or desktop stand using excessive force. The product may get damaged or fall and cause personal
injury. Samsung shall not be held liable for any damage or injury caused by using improper screws
or attaching the wall-mount kit or desktop stand using excessive force.
ďŹ
Samsung shall not be held liable for any product damage or personal injury caused by using a
wallmount kit other than the one specified or from an attempt to install the wall-mount kit on your
own.
ďŹ
To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10 cm
or farther away from the wall.
ďŹ
Be sure to use a wall-mount kit that complies with the standards.
ďŹ
To install the product on a wall using the wall-mount kit, remove the stand.
1 Preparations
28
1
Preparations
1.3.4 Adjusting the Product Tilt and Height
The color and shape of parts may differ from what is shown.
Specifications are subject to change without notice to improve quality.
0 ~ 130 mm (Âą3mm)
-5° (¹2.0°) ~ +22° (-1.5°~ 2.0°)
ďŹ
The monitor tilt and height can be adjusted.
ďŹ
Hold the top center of the product and adjust the height carefully.
1.3.5 Rotating the Monitor Screen
You can rotate your monitor as shown below.
ďŹ
Adjust the screen following the arrow direction.
ďŹ
Rotate the screen in clockwise direction till it becomes completely vertical to the desktop.
ďŹ
The monitor may get damaged if you rotate the screen without tilt, or counter clockwise direction.
1 Preparations
29
1
Preparations
1.3.6 Anti-theft Lock
An anti-theft lock allows you to use the product securely even in public places. The locking device shape
and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft
locking device for details. The lock device is sold separately.
The color and shape of parts may differ from what is shown. Specifications are subject to change
without notice to improve quality.
To lock an anti-theft locking device:
Fix the cable of your anti-theft locking device to a heavy object such as a desk.
Put one end of the cable through the loop on the other end.
Insert the locking device into the anti-theft lock slot at the back of the product.
Lock the locking device.
ďŹ
An anti-theft locking device can be purchased separately.
ďŹ
Refer to the user guide provided with your anti-theft locking device for details.
ďŹ
Anti-theft locking devices can be purchased at electronics retailers or online.
1 Preparations
30
1
1.4
Preparations
"MagicRotation Auto"
The "MagicRotation Auto" function detects the rotation of monitors that are fitted with a rotation sensor
and rotates the Windows screen accordingly.
[Software Installation]
Insert the user manual CD provided with the product into the CD-ROM drive.
Follow the instructions given on the screen to proceed with installation.
After installation, the application menu language will be displayed in the language of the operating
system.
(This complies with the basic policies of Windows.)
[Caution]
Compatible only with Windows 7 (32 bit or 64 bit) and Windows 8 (32 bit or 64 bit).
Compatible with a graphics card that complies with the DDC/CI and MS API standards
With a graphics card that does not comply with the aforementioned standards,
the "MagicRotation Auto" function may not be available.
To maximize the performance of the function, update the graphics card driver to the latest version.
Fourteen languages are available as installation languages.
(QJOLVK)UDQoDLV'HXWVFK0DJ\DU,WDOLDQR3ROVNL3RUWXJXrV
ƧÇÇÇÇĆżÇ(VSDxRO6YHQVND7ÂUNoHᣣá§âşăŠˇâäŕŹË˛ß
If the orientation is set to a mode other than "Landscape" in the screen resolution menu on
Windows 7, the "MagicRotation Auto" function may not work properly.
The OSD menu will be displayed if the monitor is rotated. When the monitor is rotated, the screen
reconfiguration process may be displayed or screen burn-in may appear, depending on the graphics
card. This is performed by the Windows operating system and has nothing to do with the product.
If you do not want the screen to rotate automatically when the monitor is rotated, press the Windows
and L keys at the same time to lock the Windows operating system. If the operating system cannot
be locked, it is due to the constraints of Windows API and has nothing to do with the product.
1 Preparations
31
1
1.5
Preparations
Rotating the monitor
When rotating the monitor, the rotation angle is displayed on the monitor screen.
0°
90°
The on-screen display (OSD) menu items will automatically rotate when the screen rotates.
MENU
MENU
EYE
SAVER
EYE
SAVER
SOURCE
PIP/PBP
SOURCE
PIP/PBP
[Caution]
If the "MagicRotation Auto" software is not installed on the monitor, contents on the screen cannot
be rotated. The OSD can still rotate by 90° and display properly.
Once rotated, the OSD may appear in a different view mode from the mode before it was rotated.
1 Preparations
32
2
2.1
Connecting and Using a Source Device
Before Connecting
2.1.1 Pre-connection Checkpoints
ďŹ
Before connecting a source device, read the user manual provided with it.
The number and locations of ports on source devices may differ from device to device.
ďŹ
Do not connect the power cable until all connections are completed.
Connecting the power cable during connection may damage the product.
ďŹ
2.2
Check the types of ports at the back of the product you want to connect.
Connecting and Using a PC
Select a connection method suitable for your PC.
ďŹ
Connecting parts may differ in different products.
ďŹ
To ensure the screen displays properly, do not use HDMI-to-DP, micro HDMI-to-DP or other
nonstandard cables bought from a dealer. It is recommended that you use the cables that came
with the product.
ďŹ
If you don't use the cable that came with the components of the monitor, the monitor may not
support the best resolution.
2.2.1 Connection Using the HDMI Cable
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
U24E850R
DVI
HDMI
IN IN
Connect the HDMI cable to the [HDMI IN] port on the back of the product and the HDMI port on the
PC.
Press [
] to change the input source to HDMI.
2 Connecting and Using a Source Device
33
2
Connecting and Using a Source Device
ďŹ
Provided ports may vary depending on the product.
ďŹ
To display 3840 x 2160 @ 60 Hz, use an HDMI cable that supports 3840 x 2160 @ 60 Hz to
connect HDMI. Make sure that the graphics card of the HDMI source supports 3840 x 2160 @
60 Hz.
ďŹ
When connecting an HDMI cable, use the cable that came with the components of the monitor. If
you use an HDMI cable other than provided by Samsung, the image quality may be degraded.
U28E850R
HDMI DVI
IN 1 IN
/ HDMI IN 2
Connect the [HDMI IN 1] or [HDMI IN 2] port on the back of the product to the HDMI port on the PC
using an HDMI cable.
Press [
] to change the input source to HDMI 1 or HDMI 2.
ďŹ
Provided ports may vary depending on the product.
ďŹ
To display 3840 x 2160 @ 30 Hz, use an HDMI cable that supports 3840 x 2160 @ 30 Hz to
connect HDMI 1. Make sure that the graphics card of the HDMI source supports 3840 x 2160
@ 30 Hz.
ďŹ
To display 3840 x 2160 @ 60 Hz, use an HDMI cable that supports 3840 x 2160 @ 60 Hz to
connect HDMI 2. Make sure that the graphics card of the HDMI source supports 3840 x 2160
@ 60 Hz.
ďŹ
When connecting an HDMI cable, use the cable that came with the components of the
monitor. If you use an HDMI cable other than provided by Samsung, the image quality may be
degraded.
2 Connecting and Using a Source Device
34
2
Connecting and Using a Source Device
2.2.2 Connection Using the DP Cable
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
DP IN
Connect one end of the DP cable to the [DP IN] port on the side of the product and the other end to
the DP port on the PC.
Press [
] to change the input source to DisplayPort.
ďŹ
Provided ports may vary depending on the product.
ďŹ
To display 3840 x 2160 @ 60 Hz, use a DP cable that supports 3840 x 2160 @ 60 Hz. Make sure
that the graphics card of the DP source supports 3840 x 2160 @ 60 Hz.
2.2.3 Connection Using the MINI DP Cable
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
MINI DP IN
Connect one end of the MINI DP cable to the [MINI DP IN] port on the side of the product and the
other end to the MINI DP port on the PC.
Press [
] to change the input source to MINI DP.
ďŹ
Provided ports may vary depending on the product.
ďŹ
To display 3840 x 2160 @ 60 Hz, use a MINI DP cable that supports 3840 x 2160 @ 60 Hz.
Make sure that the graphics card of the MINI DP source supports 3840 x 2160 @ 60 Hz.
ďŹ
The DisplayPort and MINI DP can't be identified at the same time, so if the DisplayPort or MINI DP
not as a source the PC may not be able to identify.
2 Connecting and Using a Source Device
35
2
Connecting and Using a Source Device
2.2.4 Connecting to Headphones
Do not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
AUDIO OUT
Connect an audio output device such as headphones to [
] port on the product.
ďŹ
The sound could only be heard when you video card's ports support audio out.
ďŹ
Provided ports may vary depending on the product.
2 Connecting and Using a Source Device
36
2
Connecting and Using a Source Device
2.2.5 Connecting the Power
ďŹ
ďŹ
Connecting parts may differ in different products.
ďŹ
The exterior may differ depending on the product.
To use the product, connect the power cable to a power outlet and the [POWER IN] port on the
product.
POWER IN
The input voltage is switched automatically.
2.2.6 Tidying Up the Connected Cables
2 Connecting and Using a Source Device
37
2
2.3
Connecting and Using a Source Device
Connecting the Product to a PC as a USB HUB
2.3.1 Connecting a PC to the Product
The product can function as a HUB by connecting to a PC via a USB cable. You can connect a source
device directly to the product and control the device from the product, without having to connect the
device to the PC.
To use the product as a USB hub, connect the product to a PC using a USB cable.
Connect the USB cable to [
] on the back of the product and USB [
] on the PC.
A USB 2.0 cable can be used to connect the product to a PC. However, to take full advantage of the
USB 3.0 function, connect a USB 3.0 cable between the PC and the product. Ensure the PC supports
USB 3.0.
2.3.2 Utilizing the Product as a USB HUB
Using the product as a hub, connect and use various source devices with the product at the same time.
A PC cannot connect to multiple source devices at the same time as it has a limited number of
input/output ports available. The HUB feature on the product will improve your work efficiency by
allowing you to connect multiple source devices to the USB ports on the product at the same time
without connecting them to a PC.
If multiple source devices are connected to the PC, the many cables around the PC may look messy.
Connecting the devices directly to the product will resolve such inconvenience.
Connect a mobile device such as an MP3 player or smartphone to the product when connected to a PC.
This allows you to control the device from the PC or charge the device battery.
ďŹ
To detect and start a source device faster, connect the device to the USB 3.0 port on the product.
ďŹ
An external mass-storage HDD requires an external power supply. Be sure to connect it to a
power source.
2 Connecting and Using a Source Device
38
2
Connecting and Using a Source Device
ďŹ
High-speed charging is possible using the [
1] and [
2 ] ports only. These ports charge
devices faster than typical USB ports. The speed depends on the connected devices.
ďŹ
Battery charging is possible in power-saving mode. However, it is not possible when the product is
powered off.
ďŹ
Battery charging is not possible if the power cable is disconnected from the power socket.
ďŹ
Mobile devices should be purchased separately.
2 Connecting and Using a Source Device
39
2
2.4
Connecting and Using a Source Device
Driver Installation
ďŹ
You can set the optimum resolution and frequency for this product by installing the corresponding
drivers.
ďŹ
An installation driver is contained on the CD supplied with the product.
ďŹ
If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com/) and
download the file.
Insert the user manual CD provided with the product into the CD-ROM drive.
Go to Display Properties and check that the resolution and refresh rate are appropriate.
Click "Windows Driver".
Follow the instructions given on the screen to proceed with installation.
Select your product model from the list of models.
Refer to your Windows OS manual for further details.
2 Connecting and Using a Source Device
40
2
2.5
Connecting and Using a Source Device
Setting Optimum Resolution
An information message about setting optimum resolution will appear if you power on the product for the
first time after purchase.
Select a language on the product and change the resolution on your PC to the optimum setting.
6HWXS*XLGH
/DQJXDJH
(QJOLVK
7KHRSWLPDOUHVROXWLRQIRUWKLV
PRQLWRULVDVIROORZV
[
+]
8VHWKHDERYHVHWWLQJVWRVHW
WKHUHVROXWLRQRQ\RXU3&
&XUUHQW5HVROXWLRQ
[
&ORVH
Press [
] to display the language settings menu.
To hide the information message, press [
] or [
].
ďŹ
If the optimum resolution is not selected, the message will appear up to three times for a specified
time even when the product is turned off and on again.
ďŹ
The optimum resolution can also be selected in Control Panel on your PC.
2 Connecting and Using a Source Device
41
3
Screen Setup
Configure the screen settings such as brightness.
A detailed description of each function is provided. Refer to your product for details.
3.1
SAMSUNG MAGIC Bright
This menu provides an optimum picture quality suitable for the environment where the product will be
used.
ďŹ
This menu is not available when Smart Eco Saving is enabled.
ďŹ
SAMSUNG
This menu is not available when MAGIC
Angle is enabled.
ďŹ
This menu is not available when Game Mode is enabled.
ďŹ
This menu is not available when Eye Saver Mode is enabled.
ďŹ
Not available when PIP/PBP Mode is set to On.
You can customize the brightness to suit your preferences.
3.1.1 Configuring SAMSUNG MAGIC Bright
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to Picture and press [
] on the product.
Press [
SAMSUNG
] to move to MAGIC
Bright and press [
] on the product.
The following screen will appear.
U24E850R
Picture
SAMSUNG
MAGIC Bright
Custom
Brightness
Standard
Contrast
Cinema
Sharpness
Dynamic Contrast
Set to an optimum
picture quality suitable
for the working
environment.
Color
HDMI Black Level
Eye Saver Mode
Off
3 Screen Setup
42
3
Screen Setup
U28E850R
Picture
SAMSUNG
MAGIC Bright
Custom
Brightness
Standard
Contrast
Cinema
Sharpness
Dynamic Contrast
Set to an optimum
picture quality suitable
for the working
environment.
Color
SAMSUNG
MAGIC Angle
Off
HDMI Black Level
ďŹ
Custom: Customize the contrast and brightness as required.
ďŹ
Standard: Obtain a picture quality suitable for editing documents or using Internet.
ďŹ
Cinema: Obtain the brightness and sharpness of TVs suitable for enjoying video and DVD content.
ďŹ
Dynamic Contrast: Obtain balanced brightness through automatic contrast adjustment.
3 Screen Setup
43
3
Screen Setup
U24E850R
Picture
SAMSUNG
MAGIC Bright
Dynamic
Brightness
Standard
Contrast
Movie
Sharpness
Custom
Set to an optimum
picture quality suitable
for the working
environment.
Color
HDMI Black Level
Eye Saver Mode
Off
U28E850R
Picture
SAMSUNG
MAGIC Bright
Dynamic
Brightness
Standard
Contrast
Movie
Sharpness
Custom
Set to an optimum
picture quality suitable
for the working
environment.
Color
SAMSUNG
MAGIC Angle
Off
HDMI Black Level
When the external input is connected through HDMI/DP/MINI DP and PC/AV Mode is set to AV,
SAMSUNG
MAGICBright
has four automatic picture settings (Dynamic, Standard, Movie and Custom) that are
preset at the factory. You can activate either Dynamic, Standard, Movie or Custom. You can
select Custom which automatically recalls your personalized picture settings.
ďŹ
Dynamic: Select this mode to view a sharper image than in Standard mode.
ďŹ
Standard: Select this mode when the surroundings are bright. This also provides a sharp
image.
ďŹ
Movie: Select this mode when the surroundings are dark. This will save power and reduce eye
fatigue.
ďŹ
Custom: Select this mode when you want to adjust the image according to your preferences.
Press [
] to move to the option you want and press [
].
The selected option will be applied.
3 Screen Setup
44
3
3.2
Screen Setup
Brightness
You can adjust the general brightness of the picture. (Range: 0~100)
A higher value will make the picture appear brighter.
ďŹ
SAMSUNG
This menu is not available when MAGIC
Bright is set to Dynamic Contrast mode.
ďŹ
This menu is not available when Smart Eco Saving is enabled.
ďŹ
This menu is not available when Eye Saver Mode is enabled.
3.2.1 Configuring Brightness
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to Picture and press [
Press [
] to move to Brightness and press [
] on the product.
] on the product.
The following screen will appear.
U24E850R
Picture
SAMSUNG
MAGIC Bright
Custom
Brightness
Adjust the brightness
level. Values closer to
100 mean a brighter
screen.
100
Contrast
75
Sharpness
60
Color
HDMI Black Level
Eye Saver Mode
Off
U28E850R
Picture
SAMSUNG
MAGIC Bright
Custom
Adjust the brightness
level. Values closer to
100 mean a brighter
screen.
100
Brightness
Contrast
75
Sharpness
60
Color
SAMSUNG
Off
MAGIC Angle
HDMI Black Level
Adjust the Brightness using the [
] buttons.
The selected option will be applied.
3 Screen Setup
45
3
3.3
Screen Setup
Contrast
Adjust the contrast between the objects and background. (Range: 0~100)
A higher value will increase the contrast to make the object appear clearer.
ďŹ
SAMSUNG
This option is not available when MAGIC
Bright is in Cinema or Dynamic Contrast mode.
ďŹ
This menu is not available when Game Mode is enabled.
ďŹ
This menu is not available when PIP/PBP Mode is set to On and the Size is set to
(PBP Mode).
3.3.1 Configuring Contrast
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to Picture and press [
Press [
] to move to Contrast and press [
] on the product.
] on the product.
The following screen will appear.
U24E850R
Picture
SAMSUNG
MAGIC Bright
Custom
Brightness
Adjust the contrast
level. Values closer to
100 mean a bigger
light/dark contrast.
100
Contrast
75
Sharpness
60
Color
HDMI Black Level
Eye Saver Mode
Off
AUTO
U28E850R
Picture
SAMSUNG
MAGIC Bright
Custom
Adjust the contrast
level. Values closer to
100 mean a bigger
light/dark contrast.
100
Brightness
Contrast
75
Sharpness
60
Color
SAMSUNG
Off
MAGIC Angle
HDMI Black Level
Adjust the Contrast using the [
] buttons.
The selected option will be applied.
3 Screen Setup
46
3
3.4
Screen Setup
Sharpness
Make the outline of objects more clear or blurry. (Range: 0~100)
A higher value will make the outline of objects clearer.
ďŹ
SAMSUNG
This option is not available when MAGIC
Bright is in Cinema or Dynamic Contrast mode.
ďŹ
This menu is not available when Game Mode is enabled.
ďŹ
Not available when PIP/PBP Mode is set to On.
3.4.1 Configuring Sharpness
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to Picture and press [
Press [
] to move to Sharpness and press [
] on the product.
] on the product.
The following screen will appear.
U24E850R
Picture
SAMSUNG
MAGIC Bright
Custom
Adjust the sharpness
of the picture.
Values closer to 100
mean a sharper image.
100
Brightness
Contrast
75
Sharpness
60
Color
HDMI Black Level
Off
Eye Saver Mode
U28E850R
Picture
SAMSUNG
MAGIC Bright
Custom
Adjust the sharpness
of the picture.
Values closer to 100
mean a sharper image.
100
Brightness
Contrast
75
Sharpness
60
Color
SAMSUNG
Off
MAGIC Angle
HDMI Black Level
Adjust the Sharpness using the [
] buttons.
The selected option will be applied.
3 Screen Setup
47
3
3.5
Screen Setup
Color
A detailed description of each function is provided. Refer to your product for details.
SAMSUNG
Adjust the tint of the screen. This menu is not available when MAGIC
Bright is set to Cinema or
Dynamic Contrast mode.
ďŹ
ďŹ
This menu is not available when Game Mode is enabled.
ďŹ
This menu is not available when Eye Saver Mode is enabled.
ďŹ
SAMSUNG
The Color Tone and Gamma menu is not available when MAGIC
Angle is enabled.
ďŹ
Not available when PIP/PBP Mode is set to On.
3.5.1 Configuring Color
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to Picture and press [
Press [
] to move to Color and press [
] on the product.
] on the product.
The following screen will appear.
U24E850R
U28E850R
Picture
SAMSUNG
MAGIC Bright
Configure color
settings.
Custom
Brightness
100
Picture
Configure color
settings.
SAMSUNG
MAGIC Bright
Custom
100
Brightness
Contrast
75
Contrast
75
Sharpness
60
Sharpness
60
Color
Color
SAMSUNG
HDMI Black Level
MAGIC Angle
Eye Saver Mode
Off
Color
Red
50
Green
50
Blue
Off
HDMI Black Level
Adjust the red
saturation level.
Values closer to 100
mean greater
intensity for the color.
50
Color Tone
Normal
Gamma
Mode1
ďŹ
Red: Adjust the red saturation level. Values closer to 100 mean greater intensity for the color.
ďŹ
Green: Adjust the green saturation level. Values closer to 100 mean greater intensity for the
color.
ďŹ
Blue: Adjust the blue saturation level. Values closer to 100 mean greater intensity for the color.
ďŹ
Color Tone: Select a color tone that best suits your viewing needs.
3 Screen Setup
48
3
Screen Setup
ďŻ
Cool 2: Set the color temperature to be cooler than Cool 1.
ďŻ
Cool 1: Set the color temperature to be cooler than Normal mode.
ďŻ
Normal: Display the standard color tone.
ďŻ
Warm 1: Set the color temperature to be warmer than Normal mode.
ďŻ
Warm 2: Set the color temperature to be warmer than Warm 1.
ďŻ
Custom: Customize the color tone.
When the external input is connected through HDMI/DP/MINI DP and PC/AV Mode is set to
AV,
Color Tone has four color temperature settings (Cool, Normal, Warm and Custom).
ďŹ
Gamma: Adjust the middle level of luminance.
ďŻ
Mode1
ďŻ
Mode2
ďŻ
Mode3
Press [
] to move to the option you want and press [
].
The selected option will be applied.
3 Screen Setup
49
3
3.6
Screen Setup
SAMSUNG MAGIC Angle (U28E850R)
SAMSUNG
MAGIC Angle
allows you to configure the settings to obtain the optimum picture quality according to your
viewing angle.
ďŹ
SAMSUNG
This option is not available when MAGIC
Bright is in Cinema or Dynamic Contrast mode.
ďŹ
This menu is not available when Game Mode is enabled.
ďŹ
This menu is not available when Eye Saver Mode is enabled.
ďŹ
Not available when PIP/PBP Mode is set to On.
This feature provides the viewing angle, brightness, and tint to suit your preferences.
3.6.1 Configuring SAMSUNG MAGIC Angle
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to Picture and press [
Press [
SAMSUNG
] on the product.
] to move to MAGICAngle and press [
] on the product.
The following screen will appear.
Picture
SAMSUNG
MAGIC Bright
Custom
Brightness
Contrast
Sharpness
Color
SAMSUNG
MAGIC Angle
HDMI Black Level
Select an angle that
best suits your viewing
position.
100
Off
Lean Back Mode 1
75
60
Lean Back Mode 2
Standing Mode
Off
Side Mode
3 Screen Setup
50
3
Screen Setup
Picture
SAMSUNG
MAGIC Bright
Custom
Brightness
Select an angle that
best suits your viewing
position.
100
Group View
Contrast
75
Custom
Sharpness
60
Color
SAMSUNG
Off
MAGIC Angle
HDMI Black Level
ďŹ
Off â : Select this option to view directly in front of the product.
ďŹ
Lean Back Mode 1 ⥠: Select this option to view from a place slightly lower than the product.
ďŹ
Lean Back Mode 2 ⢠: Select this option to view from a place lower than Lean Back Mode 1.
ďŹ
Standing Mode ⣠: Select this option to view from a place higher than the product.
ďŹ
Side Mode ⤠: Select this option to view from either side of the product.
ďŹ
Group View: Select this option for more than one viewer to view from places â , ⣠and ⤠.
ďŹ
Custom: Lean Back Mode 1 will be applied by default if Custom is selected.
Press [
] to move to the option you want and press [
].
The selected option will be applied.
3 Screen Setup
51
3
3.7
Screen Setup
HDMI Black Level
If a DVD player or set-top box is connected to the product via HDMI, image quality degradation (contrast/
color degradation, black level, etc.) may occur, depending on the connected source device. In such
case, HDMI Black Level can be used to adjust the image quality. If this is the case, correct the degraded
picture quality using HDMI Black Level.
ďŹ
This function is only available in HDMI, HDMI or HDMI 2 mode.
ďŹ
Not available when PIP/PBP Mode is set to On.
3.7.1 Configuring the HDMI Black Level Settings
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to Picture and press [
] on the product.
Press [
] to move to HDMI Black Level and press [
] on the product.
The following screen will appear.
U24E850R
Picture
SAMSUNG
MAGIC Bright
Dynamic
Brightness
Optimize HDMI picture
brightness and contrast
by adjusting the black
level of the video signal.
100
Contrast
75
Sharpness
Color
HDMI Black Level
Normal
60
Low
Eye Saver Mode
Off
U28E850R
Picture
SAMSUNG
MAGIC Bright
Dynamic
Brightness
Optimize HDMI picture
brightness and contrast
by adjusting the black
level of the video signal.
100
Contrast
75
Sharpness
60
Color
SAMSUNG
MAGIC Angle
HDMI Black Level
ďŹ
ďŹ
Normal
Off
Low
Normal: Select this mode when there is no contrast ratio degradation.
Low: Select this mode to reduce the black level and increase the white level when there is a
contrast ratio degradation.
Press [
] to move to the option you want and press [
].
The selected option will be applied.
HDMI Black Level may not be compatible with some source devices.
3 Screen Setup
52
3
3.8
Screen Setup
Eye Saver Mode
Not available when PIP/PBP Mode is set to On.
Set to an optimum picture quality suitable for eye relaxation.
TĂV Rheinland âLow Blue Light Contentâ is a certification for products which meet requirements for lower
blue light levels. When Eye Saver Mode is 'On', the blue light that wavelength is around 400nm will
become lower and lower, and one hour later it will approach the optimum picture quality suitable for eye
relaxation. At the same time, the blue light level is lower than in the default settings, and it was tested by
TĂV Rheinland and certified as it met the requirements of TĂV Rheinland âLow Blue Light Contentâ
standards.
3.8.1 Configuring Eye Saver Mode
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to Picture and press [
] on the product.
Press [
] to move to Eye Saver Mode and press [
] on the product.
The following screen will appear.
U24E850R
Picture
SAMSUNG
MAGIC Bright
Dynamic
Optimize HDMI picture
brightness and contrast
by adjusting the black
level of the video signal.
100
Brightness
Contrast
75
Sharpness
60
Color
HDMI Black Level
Eye Saver Mode
Off
60
On
Off
U28E850R
Picture
Eye Saver Mode
Off
Game Mode
On
Set to an optimum
picture quality suitable
for eye relaxation.
Response Time
Picture Size
Wide
Screen Adjustment
Press [
] to move to the option you want and press [
].
The selected option will be applied.
3 Screen Setup
53
3
3.9
Screen Setup
Game Mode
Configure the product screen settings for game mode.
Use this feature when playing games on a PC or when a game console such as PlayStation⢠or Xboxâ˘
is connected.
ďŹ
This menu is not available when Eye Saver Mode is enabled.
ďŹ
This Menu is not available when Smart Eco Saving is enabled.
ďŹ
Not available when PIP/PBP Mode is set to On.
3.9.1 Configuring Game Mode
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to Picture and press [
] on the product.
Press [
] to move to Game Mode and press [
] on the product.
The following screen will appear.
U24E850R
Picture
Game Mode
Response Time
Picture Size
Optimizes image
settings for playing
games.
Off
On
Always On
Screen Adjustment
16:9
U28E850R
Picture
Optimizes image
settings for playing
games.
Eye Saver Mode
Game Mode
Off
Response Time
On
Picture Size
Always On
16:9
Screen Adjustment
Press [
] to move to the option you want and press [
].
The selected option will be applied.
ďŹ
Game Mode turns Off when the monitor turns on, power-saving mode activates, or the input
source changes.
3 Screen Setup
54
3
Screen Setup
ďŹ
If you want to keep Game Mode enabled all the time, select Always On.
3 Screen Setup
55
3
Screen Setup
3.10 Response Time
Accelerate the panel response rate to make video appear more vivid and natural.
ďŹ
It is best to set Response Time to Standard or Faster when you are not viewing a movie.
ďŹ
This menu is not available when PIP/PBP Mode is set to On and the Size is set to
(PIP Mode).
3.10.1 Configuring the Response Time
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to Picture and press [
] on the product.
Press [
] to move to Response Time and press [
] on the product.
The following screen will appear.
U24E850R
Picture
Accelerate the panel
response rate to make
video appear more
vivid and natural.
Game Mode
Response Time
Standard
Picture Size
Faster
Screen Adjustment
Fastest
16:9
U28E850R
Picture
Eye Saver Mode
Off
Accelerate the panel
response rate to make
video appear more
vivid and natural.
Game Mode
Press [
Response Time
Standard
Picture Size
Faster
Screen Adjustment
Fastest
] to move to the option you want and press [
16:9
].
The selected option will be applied.
3 Screen Setup
56
3
Screen Setup
3.11 Picture Size
Change the picture size.
ďŹ
This menu is not available when PIP/PBP Mode is set to On and the Size is set to
(PBP Mode).
ďŹ
Not available when FreeSync is enable
3.11.1 Changing the Picture Size
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to Picture and press [
Press [
] to move to Picture Size and press [
] on the product.
] on the product.
The following screen will appear.
In PC mode
U24E850R
Picture
Off
Game Mode
Choose the size and
aspect ratio of the
picture displayed on
screen.
Response Time
Picture Size
Auto
Screen Adjustment
Wide
16:9
U28E850R
Picture
Eye Saver Mode
Off
Game Mode
Off
Choose the size and
aspect ratio of the
picture displayed on
screen.
Response Time
Picture Size
Auto
Screen Adjustment
Wide
16:9
ďŹ
Auto: Display the picture according to the aspect ratio of the input source.
ďŹ
Wide: Display the picture in full screen regardless of the aspect ratio of the input source.
3 Screen Setup
57
3
Screen Setup
In AV mode
U24E850R
Picture
Game Mode
Off
Choose the size and
aspect ratio of the
picture displayed on
screen.
Response Time
Picture Size
4:3
Screen Adjustment
16:9
16:9
Screen Fit
U28E850R
Picture
Eye Saver Mode
Off
Game Mode
Off
Choose the size and
aspect ratio of the
picture displayed on
screen.
Response Time
Picture Size
4:3
Screen Adjustment
16:9
16:9
Screen Fit
ďŹ
4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.
ďŹ
16:9: Display the picture with an aspect ratio of 16:9.
ďŹ
Screen Fit: Display the picture of the sub-screen with the original aspect ratio without cutting
off.
ďŹ
The function may not be supported depending on the ports provided with the product.
ďŹ
Changing the screen size is available when the following conditions are satisfied.
Press [
ďŻ
A digital output device is connected using the HDMI/DP/MINI DP cable.
ďŻ
The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally
(Not every model can support all of these signals.).
ďŻ
This can only be set when the external input is connected through HDMI/DP/MINI DP
and PC/AV Mode is set to AV.
] to move to the option you want and press [
].
The selected option will be applied.
3 Screen Setup
58
3
Screen Setup
3.12 Screen Adjustment
3.12.1 Configuring H-Position & V-Position
H-Position: Move the screen to the left or right.
V-Position: Move the screen up or down.
This menu is only available when Picture Size is set to Screen Fit in AV Mode. When a 480P or 576P
or 720P or 1080P signal is input in AV mode and the monitor can display normally, select Screen Fit to
adjust horizontal position in 0-6 levels.
Press any button on the front of the product to display the Function Key Guide. Next, press [
display the corresponding menu screen.
Press [
] to move to Picture and press [
Press [
] to move to Screen Adjustment and press [
Press [
] to move to H-Position or V-Position and press [
] to
] on the product.
] on the product.
].
The following screen will appear.
U24E850R
U28E850R
Picture
Picture
Game Mode
Off
Response Time
Faster
Picture Size
Screen Fit
Screen Adjustment
Eye Saver Mode
Game Mode
Response Time
Picture Size
Off
Off
Faster
Screen Fit
Screen Adjustment
Screen Adjustment
H-Position
V-Position
Screen Adjustment
Press [
H-Position
V-Position
Move the image
displayed on the
screen to the left or
right.
Move the image
displayed on the
screen up or down.
] to configure H-Position or V-Position.
The selected option will be applied.
3 Screen Setup
59
4
4.1
Configuring the PIP/PBP Settings
PIP/PBP
The PIP (Picture in Picture) function separates the screen into two parts. One source device is displayed
on the main screen at the same time the another source device is displayed in inset windows.
The PBP (Picture by Picture) function separates the screen in half displaying output from two different
source devices simultaneously on the left and right sides of the screen.
ďŹ
Compatible with Windows7 and Windows8.
ďŹ
The PIP/PBP function may not be available depending on the specifications of the graphics card
used. If the screen is blank in PIP/PBP mode when the optimum resolution is selected, go to
Control Panel â Display â Screen Resolution and click Detect on the PC.
(Instructions are based on Windows 7.) If the screen is blank when the resolution is set to the
optimum resolution, change the resolution to 1280 x 1024.
ďŹ
The screen may flicker briefly or appear after a delay when you enable or disable the PIP/PBP
function or when you change the screen size with the PIP/PBP function activated.
This can typically arise when a PC and a monitor are connected to two or more input sources.
It has nothing to do with the performance of a monitor.
The issue is mainly caused when the video signals are delayed in transmission to the monitor
depending on the graphics card performance.
ďŹ
U24E850R
To maximize the picture quality and sound can be normal output, it is recommended to use a
graphics card or DVD that supports 4K (3840 x 2160 @ 60 Hz) resolution when connect HDMI
port.
ďŹ
U28E850R
To maximize the picture quality and sound can be normal output, it is recommended to use a
graphics card or DVD that supports 4K (3840 x 2160 @ 30 Hz) resolution when connect HDMI 1
port.
To maximize the picture quality and sound can be normal output, it is recommended to use a
graphics card or DVD that supports 4K (3840 x 2160 @ 60 Hz) resolution when connect HDMI 2
port.
4 Configuring the PIP/PBP Settings
60
4
Configuring the PIP/PBP Settings
ďŹ
When the PIP/PBP function is enabled, the resolution will not be able to automatically switch to
the optimum resolution due to a compatibility issue between the graphics card and the Windows
system. Set PIP/PBP Mode to Off. Alternatively, restart the monitor,then set the resolution to the
optimum setting using the Windows interface.
4 Configuring the PIP/PBP Settings
61
4
Configuring the PIP/PBP Settings
4.1.1 Configuring PIP/PBP Mode
Enable or disable the PIP/PBP function.
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to PIP/PBP and press [
Press [
] to move to PIP/PBP Mode and press [
] on the product.
] on the product.
The following screen will appear.
PIP/PBP
Turn PIP/PBP Mode
on or off.
PIP/PBP Mode
Off
Size
On
Off
Position
Sound Source
Source
Picture Size
Contrast
ďŹ
Off / On
Press [
] to move to the option you want and press [
].
The selected option will be applied.
4 Configuring the PIP/PBP Settings
62
4
Configuring the PIP/PBP Settings
4.1.2 Configuring Size
Select the size and aspect ratio of the sub-screen.
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to PIP/PBP and press [
Press [
] to move to Size and press [
] on the product.
] on the product.
The following screen will appear.
U24E850R
U28E850R
PIP/PBP
Select the size and
aspect ratio of the
sub-screen.
PIP/PBP Mode
PIP/PBP
Size
Size
Position
Position
Sound Source
Sound Source
Source
Source
Picture Size
Contrast
Select the size and
aspect ratio of the
sub-screen.
PIP/PBP Mode
75/100
Left:
HDMI
Picture Size
Right:
DisplayPort
Contrast
Left:
HDMI 2
75/100
Right:
HDMI 1
: Select the icon image if you want to use PBP mode where the optimum resolution for the
ďŹ
left and right sides of the screen is 1920 x 2160 (width x height).
: Select the icon image if you want to use PIP mode where the optimum resolution for the
ďŹ
sub-screen is 720 x 480 (width x height).
: Select the icon image if you want to use PIP mode where the optimum resolution of the
ďŹ
sub-screen is 1280 x 720 (width x height).
: Select the icon image if you want to use PIP mode where the optimum resolution of the
ďŹ
sub-screen is 1920 x 1080 (width x height).
Press [
] to move to the option you want and press [
].
The selected option will be applied.
4 Configuring the PIP/PBP Settings
63
4
Configuring the PIP/PBP Settings
4.1.3 Configuring Position
Select the position of the sub-screen from the available options.
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to PIP/PBP and press [
] on the product.
Press [
] to move to Position and press [
] on the product.
The following screen will appear.
U24E850R
U28E850R
PIP/PBP
PIP/PBP Mode
On
Select the position of
the sub-screen from
the available options.
PIP/PBP Mode
Size
Size
Position
Position
Sound Source
Sound Source
Source
On
Select the position of
the sub-screen from
the available options.
Source
Picture Size
Main:
HDMI
Picture Size
Main:
HDMI 2
Contrast
Sub:
DisplayPort
Contrast
Sub:
HDMI 1
ďŹ
PIP/PBP
Press [
] to move to the option you want and press [
].
The selected option will be applied.
ďŹ
Not available when PBP is selected.
ďŹ
The screen may flicker if the input signal is unstable.
4 Configuring the PIP/PBP Settings
64
4
Configuring the PIP/PBP Settings
4.1.4 Configuring Sound Source
Set which screen you want to hear the sound for.
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to PIP/PBP and press [
Press [
] to move to Sound Source and press [
] on the product.
] on the product.
The following screen will appear.
The white area of the icon means that the Sound Source comes from the main screen/sub-screen
or the left/right screen.
PIP
U24E850R
U28E850R
PIP/PBP
PIP/PBP Mode
On
PIP/PBP
Set which screen you
want to hear the
sound for.
PIP/PBP Mode
Size
Size
Position
Position
Sound Source
Sound Source
Source
On
Set which screen you
want to hear the
sound for.
Source
Picture Size
Main:
HDMI
Picture Size
Contrast
Sub:
DisplayPort
Contrast
75
Main:
HDMI 2
75
Sub:
HDMI 1
ďŹ
PBP
U24E850R
U28E850R
PIP/PBP
PIP/PBP Mode
On
Set which screen you
want to hear the
sound for.
PIP/PBP Mode
Size
Size
Position
Position
Sound Source
Sound Source
Source
Left:
HDMI
Picture Size
Contrast
Right:
DisplayPort
Contrast
Press [
On
Set which screen you
want to hear the
sound for.
Source
Picture Size
ďŹ
PIP/PBP
75/100
Left:
HDMI 2
75/100
Right:
HDMI 1
] to move to the option you want and press [
].
The selected option will be applied.
4 Configuring the PIP/PBP Settings
65
4
Configuring the PIP/PBP Settings
4.1.5 Configuring Source
Select the source for each screen.
Due to DisplayPort and MINI DP can't be identified at the same time, if DisplayPort and MINI DP as
the source at the same time ,the 'Apply' is not available.
PIP
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to PIP/PBP and press [
Press [
] to move to Source and press [
] on the product.
] (available in PIP mode (Size
)).
The following screen will appear.
U24E850R
If the function button description page appears, press [
The main screen will switch in the order DisplayPort
].
â MINI DP â HDMI.
PIP/PBP
Select the source for
each screen.
PIP/PBP Mode
On
Size
Position
Sound Source
Source
DisplayPort
Picture Size
HDMI
Contrast
ďŹ
DisplayPort
ďŹ
MINI DP
ďŹ
HDMI
4 Configuring the PIP/PBP Settings
66
4
Configuring the PIP/PBP Settings
U28E850R
If the function button description page appears, press [
The main screen will switch in the order DisplayPort
â
PIP/PBP
].
MINI DP
â HDMI 1 â HDMI 2.
Select the source for
each screen.
PIP/PBP Mode
On
Size
Position
Sound Source
ďŹ
DisplayPort
ďŹ
MINI DP
ďŹ
HDMI 1
ďŹ
HDMI 2
Press [
Source
DisplayPort
Picture Size
HDMI 1
Contrast
HDMI 2
] to move to the option you want and press [
].
The selected option will be applied.
ďŹ
The input source for the main screen changes.
ďŹ
With the exception of the current input source, the other two input sources can be selected.
ďŹ
The screen may flicker if the input signal is unstable.
4 Configuring the PIP/PBP Settings
67
4
Configuring the PIP/PBP Settings
PBP
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to PIP/PBP and press [
Press [
] to move to Source and press [
] on the product.
] (available in PBP mode (Size
)).
The following screen will appear.
U24E850R
If the function button description page appears, press [
The main screen will switch in the order DisplayPort
PIP/PBP
PIP/PBP Mode
].
â MINI DP â HDMI.
6RXUFH
Select the source for
each screen.
On
Size
Position
DisplayPort
Sound Source
Source
HDMI
$SSO\
&DQFHO
Picture Size
Contrast
ďŹ
DisplayPort
ďŹ
MINI DP
ďŹ
HDMI
75/100
4 Configuring the PIP/PBP Settings
68
4
Configuring the PIP/PBP Settings
U28E850R
If the function button description page appears, press [
The main screen will switch in the order DisplayPort
PIP/PBP
â
].
MINI DP
â HDMI 1 â HDMI 2.
6RXUFH
Select the source for
each screen.
PIP/PBP Mode
On
Size
Position
DisplayPort
HDMI 1
Sound Source
Source
$SSO\
&DQFHO
Picture Size
Contrast
75/100
ďŹ
DisplayPort
ďŹ
MINI DP
ďŹ
HDMI 1
ďŹ
HDMI 2
Press [
Press [
] to move to the option you want and press [
] to move to Apply and press [
].
] on the product. Pressing [
] when Cancel
is selected will clear the Source settings and display the PIP/PBP control menu page.
ďŹ
The input source for the main screen changes.
ďŹ
The screen may flicker if the input signal is unstable.
ďŹ
When the input signal of the left and right screens are the same, the operation cannot be
performed.
4 Configuring the PIP/PBP Settings
69
4
Configuring the PIP/PBP Settings
4.1.6 Configuring Picture Size
Select the image size for sub-screen.
PIP
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to PIP/PBP and press [
Press [
] to move to Picture Size and press [
] on the product.
] (available in PIP mode (Size
)).
The following screen will appear.
In PC mode
PIP/PBP
Select the image size
for each screen.
PIP/PBP Mode
On
Size
Position
Sound Source
Source
Auto
Picture Size
Wide
Contrast
75/75
ďŹ
Auto: Display the picture according to the aspect ratio of the each screen input source.
ďŹ
Wide: Display the picture in full screen regardless of the aspect ratio of the each screen input
source.
In AV mode
PIP/PBP
Select the image size
for each screen.
PIP/PBP Mode
On
Size
Position
Sound Source
Source
Picture Size
Contrast
ďŹ
4:3
16:9
Screen Fit
75/75
4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and
standard broadcasts.
ďŹ
16:9: Display the picture of the sub-screen with an aspect ratio of 16:9.
ďŹ
Screen Fit: Display the picture of the sub-screen with the original aspect ratio without cutting
anything off.
ďŹ
The function may not be supported depending on the ports provided with the product.
4 Configuring the PIP/PBP Settings
70
4
Configuring the PIP/PBP Settings
ďŹ
Press [
Changing the screen size is available when the following conditions are satisfied.
ďŻ
A digital output device is connected using the HDMI/DP/MINI DP cable.
ďŻ
The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally
(Not every model can support all of these signals.).
ďŻ
This can only be set when the external input is connected through HDMI/DP/MINI DP
and PC/AV Mode is set to AV.
] to move to the option you want and press [
].
The selected option will be applied.
4 Configuring the PIP/PBP Settings
71
4
Configuring the PIP/PBP Settings
PBP
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to PIP/PBP and press [
] on the product.
Press [
] to move to Picture Size and press [
] (available in PBP mode (Size
)).
The following screen will appear.
PIP/PBP
Select the image size
for each screen.
PIP/PBP Mode
On
Size
Position
Sound Source
Source
Picture Size
Contrast
75/100
In PC mode
3LFWXUH6L]H
$SSO\
Wide
Wide
&DQFHO
ďŹ
Auto: Display the picture according to the aspect ratio of the each screen input source.
ďŹ
Wide: Display the picture in full screen regardless of the aspect ratio of the each screen input
source.
4 Configuring the PIP/PBP Settings
72
4
Configuring the PIP/PBP Settings
In AV mode
3LFWXUH6L]H
$SSO\
16:9
Wide
&DQFHO
ďŹ
4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and
standard broadcasts.
ďŹ
16:9: Display the picture of the sub-screen with an aspect ratio of 16:9.
ďŹ
Screen Fit: Display the picture of the sub-screen with the original aspect ratio without cutting
anything off.
ďŹ
The function may not be supported depending on the ports provided with the product.
ďŹ
Changing the screen size is available when the following conditions are satisfied.
Press [
ďŻ
A digital output device is connected using the HDMI/DP/MINI DP cable.
ďŻ
The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally
(Not every model can support all of these signals.).
ďŻ
This can only be set when the external input is connected through HDMI/DP/MINI DP
and PC/AV Mode is set to AV.
] to move to the option you want and press [
].
The selected option will be applied.
4 Configuring the PIP/PBP Settings
73
4
Configuring the PIP/PBP Settings
4.1.7 Configuring Contrast
PIP
Adjust the contrast level for sub-screen.
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to PIP/PBP and press [
] on the product.
Press [
] to move to Contrast and press [
] (available in PIP mode (Size
)).
The following screen will appear.
PIP/PBP
Adjust the contrast
level for each screen.
PIP/PBP Mode
On
Size
Position
Sound Source
Source
75
Picture Size
Contrast
Adjust the Contrast using the [
75/75
] buttons.
The selected option will be applied.
4 Configuring the PIP/PBP Settings
74
4
Configuring the PIP/PBP Settings
PBP
Adjust the contrast level for each screen.
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to PIP/PBP and press [
] on the product.
Press [
] to move to Contrast and press [
] (available in PBP mode (Size
)).
The following screen will appear.
PIP/PBP
Adjust the contrast
level for each screen.
PIP/PBP Mode
On
Size
Position
Sound Source
Source
Picture Size
Contrast
75/100
&RQWUDVW
Adjust the Contrast using the [
] buttons.
The selected option will be applied.
4 Configuring the PIP/PBP Settings
75
5
5.1
Coordinating OSD
A detailed description of each function is provided. Refer to your product for details.
Transparency
Set the transparency for the menu windows.
5.1.1 Changing Transparency
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to OnScreen Display and press [
Press [
] to move to Transparency and press [
] on the product.
] on the product.
The following screen will appear.
OnScreen Display
Transparency
Off
Language
On
Configure the
transparency of the
menu windows.
Display Time
Press [
] to move to the language you want and press [
].
The selected option will be applied.
5 Coordinating OSD
76
5
5.2
Coordinating OSD
Language
Set the menu language.
ďŹ
A change to the language setting will only be applied to the onscreen menu display.
ďŹ
It will not be applied to other functions on your PC.
5.2.1 Configuring Language
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to OnScreen Display and press [
Press [
] to move to Language and press [
] on the product.
] on the product.
The following screen will appear.
OnScreen Display
Set the menu
language.
Transparency
Language
Deutsch
Display Time
English
EspaĂąol
Français
Italiano
Press [
] to move to the language you want and press [
].
The selected option will be applied.
5 Coordinating OSD
77
5
5.3
Coordinating OSD
Display Time
Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified
period of time.
Display Time can be used to specify the time after which you want the OSD menu to disappear.
5.3.1 Configuring Display Time
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to OnScreen Display and press [
Press [
] to move to Display Time and press [
] on the product.
] on the product.
The following screen will appear.
OnScreen Display
On
Transparency
Set how long the menu
window will remain on
screen for when it is
not in use.
Language
Display Time
5 sec
10 sec
20 sec
200 sec
Press [
] to move to the option you want and press [
].
The selected option will be applied.
5 Coordinating OSD
78
6
6.1
Setup and Reset
A detailed description of each function is provided. Refer to your product for details.
FreeSync
ďŹ
FreeSync is a DisplayPort 1.2 function, so the choice of the DisplayPort Ver.1.1 in OSD, or when
the access of HDMI signal, the FreeSync function is not available.
ďŹ
The audio output of monitor may not be acceptable when FreeSync is enable
ďŹ
Make sure that FreeSync is set to Off or Mode 1 when you are playing games. If set to Mode 2
the screen may flicker.
ďŹ
ďŹ
Not available when PIP/PBP Mode is set
. to On.
The functions available on the monitor may vary depending on the model. Refer to the actual
product.
6.1.1 Configuring FreeSync
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to System and press [
Press [
] to move to FreeSync and press [
] on the product.
] on the product.
The following screen will appear.
System
On
FreeSync
Off
Smart Eco Saving
Mode1
Off Timer Plus
Mode2
USB Super Charging
System
FreeSync technology
is solution that
eliminates screen
tearing without all the
usual lag and latency.
FreeSync can be
operated when you
use AMD's graphic
card with supporting
Freesync solution.
Source Detection
Off
Eco Saving Plus
On
On
Off Timer
PC/AV Mode
FreeSync technology
is solution that
eliminates screen
tearing without all the
usual lag and latency.
FreeSync can be
operated when you
use AMD's graphic
card with supporting
Freesync solution.
1.2
DisplayPort Ver.
PC/AV Mode
DisplayPort Ver.
FreeSync
1.2
Source Detection
Auto
Auto
Key Repeat Time
Acceleration
Return
ďŹ
Off
ďŹ
Off:
ďŹ
Mode1
ďŹ
On:
ďŹ
Mode2
Press [
] to move to the option you want and press [
].
The selected option will be applied.
FreeSync technology is solution that eliminates screen tearing without all the usual lag and latency.
FreeSync can be operated when you use AMD's graphic card with supporting FreeSync solution.
FreeSync is on AMD graphics function, so other video card does not support the function.
Please refer to the AMD's official website related situation.
Only a few of the following types of AMD graphics card can support FreeSync, and need to install the
AMD's latest official FreeSync driver.
ďŹ
Radeon R9 290X/290
ďŹ
Radeon R9 285
6 Setup and Reset
79
6
Setup and Reset
ďŹ
Radeon R7 260X/260
ďŹ
AMD A10 âKaveriâ APU (ex. A10 7850K) â motherboard needs to have DP 1.2a for FreeSync to
work.
Point the right mouse button, select the AMD Catalyst Control Center.
6 Setup and Reset
80
6
6.2
Setup and Reset
Smart Eco Saving
The Smart Eco Saving function reduces power consumption by controlling the electric current used by
the monitor panel.
ďŹ
This menu is not available when Eye Saver Mode is enabled.
ďŹ
Not available when PIP/PBP Mode is set to On.
6.2.1 Configuring Smart Eco Saving
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to System and press [
Press [
] to move to Smart Eco Saving and press [
] on the product.
] on the product.
The following screen will appear.
System
Adjust the power
consumption of the
product to save energy.
FreeSync
Smart Eco Saving
Off
Off Timer Plus
On
USB Super Charging
PC/AV Mode
DisplayPort Ver.
Source Detection
1.2
Auto
ďŹ
Off: Deactivate the Smart Eco Saving function.
ďŹ
On: The power consumption will automatically be reduced by about 10% over the current
setting.
(The reduction of power consumption depends on the customer screen brightness condition.)
Press [
] to move to the option you want and press [
].
The selected option will be applied.
6 Setup and Reset
81
6
6.3
Setup and Reset
Off Timer Plus
You can set the product to automatically turn off.
6.3.1 Configuring Off Timer
Off Timer
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to System and press [
] on the product.
Press [
] to move to Off Timer Plus and press [
Press [
] to move to Off Timer and press [
] on the product.
Press [
] to move to Off Timer and press [
] on the product.
] on the product.
The following screen will appear.
System
Set the monitor to
automatically turn off
after a certain time
period.
FreeSync
Off
Smart Eco Saving
Off Timer Plus
USB Super Charging
PC/AV Mode
1.2
DisplayPort Ver.
Auto
Source Detection
Off Timer Plus
Enable or disable
the Off Timer.
Off Timer
Eco Timer
Off Timer
Enable or disable the
Off Timer.
Off Timer
Off
Turn Off After
On
ďŹ
Off: Deactivate the off timer so that the product does not power off automatically.
ďŹ
On: Activate the off timer so that the product powers off automatically.
6 Setup and Reset
82
6
Setup and Reset
Press [
] to move to the option you want and press [
].
The selected option will be applied.
Turn Off After
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to System and press [
] on the product.
Press [
] to move to Off Timer Plus and press [
Press [
] to move to Off Timer and press [
Press [
] to move to Turn Off After and press [
] on the product.
] on the product.
] on the product.
The following screen will appear.
Off Timer
Off Timer
Turn Off After
Press [
On
4h
Set the monitor to
automatically turn off
after a certain time
period.
4h
] to configure Turn Off After.
The selected option will be applied.
ďŹ
The off timer can be set within a range of 1 to 23 hours. The product will automatically power off
after the specified number of hours.
ďŹ
This option is only available when Off Timer is set to On.
ďŹ
For products for the market in some regions, the Off Timer is set to automatically activate 4 hours
after the product powers on. This is done in accordance with power supply regulations. If you do
not want the timer to activate, go to MENU â System and set Off Timer Plus to Off.
6 Setup and Reset
83
6
Setup and Reset
6.3.2 Configuring Eco Timer
Eco Timer
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to System and press [
] on the product.
Press [
] to move to Off Timer Plus and press [
Press [
] to move to Eco Timer and press [
] on the product.
Press [
] to move to Eco Timer and press [
] on the product.
] on the product.
The following screen will appear.
Off Timer Plus
Enable or disable
the Eco Timer.
Off Timer
Eco Timer
Eco Timer
Eco Timer
Enable or disable
the Eco Timer.
Off
Eco Off After
ďŹ
Off: Deactivate the eco timer to disable the automatic power off feature. The product will not
power off while in power-saving mode if this feature is deactivated.
ďŹ
On: Activate the eco timer so that the product powers off automatically when it has been in
power-saving mode for a specified period of time.
Press [
] to move to the option you want and press [
].
The selected option will be applied.
6 Setup and Reset
84
6
Setup and Reset
Eco Off Timer
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to System and press [
] on the product.
Press [
] to move to Off Timer Plus and press [
Press [
] to move to Eco Timer and press [
Press [
] to move to Eco Off After and press [
] on the product.
] on the product.
] on the product.
The following screen will appear.
Eco Timer
Enable or disable
the Eco Timer.
Eco Timer
Eco Off After
Press [
10 m
] to configure Eco Off After.
The selected option will be applied.
ďŹ
The Eco timer can be set between 10 and 180 minutes. The product will automatically power off
after the specified time has elapsed.
ďŹ
This option is only available when Eco Timer is set to On.
6 Setup and Reset
85
6
6.4
Setup and Reset
USB Super Charging
Charge the battery of a connected source device quickly using the USB 3.0 port on the product.
ďŹ
Setting USB Super Charging to On during a data transfer will stop the data transfer. If you set
USB Super Charging to Off, the standard charging and data transfer feature will be available.
ďŹ
High-speed charging is possible using the [
1] and [
2 ] ports only. These ports charge
devices faster than typical USB ports. The speed depends on the connected devices.
6.4.1 Configuring USB Super Charging
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to System and press [
] on the product.
Press [
] to move to USB Super Charging and press [
Press [
] to move to USB1 or USB2 and press [
] on the product.
] on the product.
The following screen will appear.
System
Set the USB Super
charging mode.
FreeSync
Smart Eco Saving
Off
Off Timer Plus
USB Super Charging
PC/AV Mode
DisplayPort Ver.
Source Detection
USB Super Charging
Set the USB Port1
charging On/Off.
1.2
Auto
USB Super Charging
USB1
Off
USB1
USB2
On
USB2
Set the USB Port2
charging On/Off.
Off
On
ďŹ
Off: Disable USB Super Charging.
ďŹ
On: Enable the function to quickly charge a source device connected to the USB 3.0 port.
Press [
] to move to the option you want and press [
].
The selected option will be applied.
6 Setup and Reset
86
6
6.5
Setup and Reset
PC/AV Mode
Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie.
ďŹ
Supplied for the wide models only such as 16:9 or 16:10.
ďŹ
If the monitor (when set to HDMI, DisplayPort, MINI DP (U24E850R) or HDMI 1, HDMI 2,
DisplayPort, MINI DP (U28E850R)) is in power saving mode or is displaying the message
Check Signal Cable, press the [
] button to display the On Screen Display(OSD). You can
select PC or AV.
6.5.1 Configuring PC/AV Mode
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to System and press [
Press [
] to move to PC/AV Mode and press [
Press [
] to move to HDMI, DisplayPort, MINI DP (U24E850R) or HDMI 1, HDMI 2,
] on the product.
DisplayPort, MINI DP (U28E850R) and press [
] on the product.
] on the product.
The following screen will appear.
System
Set to AV to enlarge
the picture.
FreeSync
Off
Smart Eco Saving
Off Timer Plus
USB Super Charging
PC/AV Mode
1.2
DisplayPort Ver.
Auto
Source Detection
U24E850R
PC/AV Mode
DisplayPort
PC
MiniDP
AV
PC/AV Mode
Select the PC/AV mode
for the DisplayPort
source.
Select the PC/AV mode
for the MiniDP source.
DisplayPort
HDMI
MiniDP
PC
HDMI
AV
PC/AV Mode
Select the PC/AV mode
for the HDMI 1 source.
DisplayPort
PC
MiniDP
HDMI
PC
AV
6 Setup and Reset
87
6
Setup and Reset
U28E850R
PC/AV Mode
DisplayPort
PC
MiniDP
AV
Select the PC/AV mode
for the DisplayPort
source.
PC/AV Mode
Select the PC/AV mode
for the HDMI 2 source.
DisplayPort
MiniDP
PC
HDMI 1
HDMI 1
AV
HDMI 2
HDMI 2
PC/AV Mode
Select the PC/AV mode
for the HDMI 2 source.
DisplayPort
PC
MiniDP
PC/AV Mode
Select the PC/AV mode
for the HDMI 2 source.
DisplayPort
PC
MiniDP
PC
HDMI 1
PC
HDMI 1
HDMI 2
AV
HDMI 2
PC
AV
Press [
] to move to the option you want and press [
].
The selected option will be applied.
6 Setup and Reset
88
6
6.6
Setup and Reset
DisplayPort Ver.
Select your Displayport. Displayport 1.1 supports High Bit Rate 1, while 1.2 supports High Bit Rate 2.
ďŹ
Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications.
ďŹ
If the monitor (when set to HDMI, DisplayPort, MINI DP (U24E850R) or HDMI 1, HDMI 2,
DisplayPort, MINI DP (U28E850R)) is in power saving mode or is displaying the message Check
Signal Cable, press the [
] button to display the On Screen Display (OSD). You can select 1.1
or 1.2.
ďŹ
If you select 1.1, the maximum resolution of your screen drops to 2560 x 1440 due to the
limitations in HBR1 transmission speeds.
6.6.1 Configuring DisplayPort Ver.
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to System and press [
] on the product.
Press [
] to move to DisplayPort Ver. and press [
] on the product.
The following screen will appear.
System
FreeSync
Off
Smart Eco Saving
Select your
Displayport.
Displayport 1.1
supports HBR 1,
while 1.2 supports
HBR 2.
Off Timer Plus
USB Super Charging
PC/AV Mode
DisplayPort Ver.
Source Detection
ďŹ
1.1
Auto
1.2
1.1 / 1.2
Press [
] to move to the option you want and press [
].
The selected option will be applied.
6 Setup and Reset
89
6
6.7
Setup and Reset
Source Detection
You can activate Source Detection.
Not available when PIP/PBP Mode is set to On.
6.7.1 Configuring Source Detection
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to System and press [
] on the product.
Press [
] to move to Source Detection and press [
] on the product.
The following screen will appear.
System
Decide how input
sources will be
detected.
FreeSync
Off
Smart Eco Saving
Off Timer Plus
USB Super Charging
1.2
PC/AV Mode
DisplayPort Ver.
Source Detection
Auto
Auto
Manual
ďŹ
Auto: The input source is automatically recognized.
ďŹ
Manual: Manually select an input source.
Press [
] to move to the option you want and press [
].
The selected option will be applied.
6 Setup and Reset
90
6
6.8
Setup and Reset
Key Repeat Time
Control the response rate of a button when the button is pressed.
6.8.1 Configuring Key Repeat Time
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to System and press [
Press [
] to move to Key Repeat Time and press [
] on the product.
] on the product.
The following screen will appear.
System
Key Repeat Time
Acceleration
Reset All
1 sec
Configure the
response rate of a
button when the button
is pressed.
2 sec
No Repeat
ďŹ
Acceleration, 1 sec, or 2 sec can be selected. If No Repeat is selected, a command responds
only once when a button is pressed.
Press [
] to move to the option you want and press [
].
The selected option will be applied.
6 Setup and Reset
91
6
6.9
Setup and Reset
Reset All
Return all the settings for the product to the default factory settings.
6.9.1 Initializing Settings (Reset All)
Press any button on the front of the product to display the Function Key Guide. Next, press [
] to
display the corresponding menu screen.
Press [
] to move to System and press [
Press [
] to move to Reset All and press [
] on the product.
] on the product.
The following screen will appear.
System
Key Repeat Time
Acceleration
Return all the settings
for the product to the
default factory settings.
Reset All
$OOWKHPHQXVHWWLQJVZLOOEHUHVHW
WRGHIDXOW
$UH\RXVXUH\RXZDQWWRUHVHW"
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.5
Linearized : Yes
Create Date : 2015:03:16 17:42:05+09:00
Modify Date : 2015:04:01 10:03:12+08:00
XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date : 2015:04:01 10:03:12+08:00
Format : application/pdf
Document ID : uuid:b8684bb7-24c9-4f20-92ac-f91a911329b9
Instance ID : uuid:c61e4544-8c56-4a39-9990-d013a9b5cb7e
Page Layout : OneColumn
Page Mode : UseOutlines
Page Count : 124
EXIF Metadata provided by EXIF.tools