Samsung Electronics Co WEP460 Bluetooth Mono Headset User Manual WEP250 Eng indd

Samsung Electronics Co Ltd Bluetooth Mono Headset WEP250 Eng indd

User manual

World Wide Webwww.samsungmobile.comPrinted in KoreaCode No.:GH68-XXXXAEU A. 07/2008. Rev. 1.0English / Français / Deutsch / NederlandsMOBILE ENHANCEMENTEnglish / Français / Deutsch / NederlandsMOBILE ENHANCEMENTWEP460
Turning the headset on or offTo turn the headset on, press and hold the Multi-function button until the blue indicator light flashes 4 times.To turn the headset off, press and hold the Multi-function button until both blue and red indicator lights flash.Understanding various modesStandby mode: The headset is waiting for a call. The blue indicator light flashes every 3 seconds.Active mode: The headset has a call in progress. The blue indicator light flashes every 8 seconds.Pairing mode: The blue indicator light stays lit. You can discover and connect to your headset on your phone.Low battery mode: There is less than 10% of battery power left. The red indicator light flashes. You must recharge the battery.Pairing with your Bluetooth phone1. Enter Pairing mode.Turn off your headset and press and hold the Multi-function button until the blue indicator light remains lit after blinking.If you turn it on for the first time, it proceeds into Pairing mode immediately.••••••
EnglishBluetooth® is a registered trademark of the Bluetooth SIG, Inc. worldwide. Bluetooth QD ID: BxxxxxxSafety and usage informationNever disassemble or modify your headset for any reason. Doing this may cause the headset to malfunction or become combustible. Bring the headset to an authorised service centre to repair it or replace the battery.When using your headset while driving, follow local regulations in the country or region you are in.Avoid storage at high temperatures (above 50° C/122° F), such as in a hot vehicle or in direct sunlight, as this can damage performance and reduce battery life.Do not expose the headset or any of its supplied parts to rain or other liquids.At very high volumes, prolonged listening to the headset can damage your hearing.Warranty and parts replacementSamsung warrants this product as free of defects in material, design and workmanship for the period of one year from the original date of purchase. (Depending on your country, the length of warranty may vary.)If during the period of warranty this product proves defective under normal use and service you should return the product to the retailer from whom it was originally purchased or qualified service center. The liability of Samsung and its appointed maintenance company is limited to the cost of repair and/or replacement of the unit under warranty.••••
2. Search for and pair with your phone according to your phone’s user guide. (Bluetooth PIN: 0000, 4 zeros)If the pairing is successful, the blue indicator light will flash 10 times rapidly before entering Standby mode.If the blue indicator light remains lit, retry pairing.When the headset and the phone are paired, the headset attempts to reconnect automatically each time it turns on. Otherwise, press the Multi-function button to reconnect.Using call functionsSome functions may not be supported by your phone.In Standby modePress the Multi-function button to:Answer an incoming callRedial the last number calledPress and hold Multi-function button to:Make a voice-activated callReject an incoming call••••••
The warranty is limited to the original purchaserA copy of your receipt or other proof of purchase is required for a proper warranty serviceThe warranty is void if the serial number, date code label or product label is removed, or if the product has been subject to physical abuse, improper installation modification, or repair by unauthorised third partiesSpecifically exempt from any warranty are limited-life consumable components such as batteries and other accessoriesSamsung will not assume any responsibility for any loss or damage incurred in shipping. All repair work on Samsung products by unauthorised third parties voids any warrantyCorrect disposal of this product(Waste Electrical & Electronic Equipment)This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.•••••
In Active modePress the Multi-function button to:End a callTransfer a call from the phone to the headsetPress and hold Multi-function button to:Place a call on holdAnswer a second callRetrieve a call on holdPress [+] or [-] to adjust the volume.Press and hold [+] or [-] to turn the microphone off or on.SpecificationsItem Specifications and descriptionBluetooth version 2.0 + EDRSupport profile Headset Profile, Hands-Free ProfileOperating range Up to 30 feet (10 metres)Maximum Standby time Up to 100 hours*Maximum Active time Up to 6 hours** Depending on the phone type and usage, the actual time may vary.•••••
Your headset overviewCharging the headsetPut the adapter into the jack on the headset and into the electrical outlet.Charge the headset until the red indicator light turns blue.Do not attempt to charge the headset with anything other than the adapter provided.Volume down buttonVolume up buttonIndicator lightMicrophoneEarhookMulti-function buttonAdapter jackEarpiece
FCCThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.The device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by Samsung will void the user’s authority to operate the equipment.Industry CanadaIC ID: 649E-WEP460Operation is subject to the following two conditions: (1) This device may not cause interference and (2) This device must Safety approvals
accept any interference, including interference that may cause undesired operation of the device.The term “IC:” before the certification/registration number only signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Canada approved the equipment.

Navigation menu