Samsung M105/M104 Cover(UK ENG) DVD M104B 20030528082951437 M105xeu ENG

User Manual: Samsung DVD-M104B Samsung DVD-M104B user manual - Introduction (ver.1.0) - ENGLISH (UNITED KINGDOM)

Open the PDF directly: View PDF PDF.
Page Count: 20

AH68-00723F
DVD PLAYER
DVD-M104/M104B/M105
UK
UK
Precautions Precautions
2 3
Ensure that the mains supply in your house complies whit that indicated on the identification sticker
located at the back of your play. Install your player horizontally, on a suitable base (furniture),
with enough space around it for ventilation (7~10cm). Make sure the ventilation slots are not covered.
Do not stack other, or heavy devices on top over the player. Do not place the player on amplifiers or
other equipmentwhich may become hot. Before moving the player ensure the disc tray empty.
This player is designed for continuous use. Switching off the DVD player to the stand-by mode dose
not disconnect the electricity supply In order to separate the player completely from the mains,it has
to be disconnected by unplugging the main plug, especially when left unused for a long period of time.
1. Setting up
Protect the player from moisture(dripping or splashing and that no objects filled with liquids,such as vases,
shall be placed on the player), and excess heat(e.g.fireplace) or equipment creating strong magnetic
or electric fields (i.e.speakers...) disconnect the power cable from the mains electricity supply if the player
malfunction. Your player is not intended for industrial use but for domestic purposes only. Use of this
product is for personal use only. Condensation If your player or disc have been stored in a cold atmosphsre.
as for example during transportation in the winter, wait for approximately 2 hours until they have reached
room temperature.
2. Caution
Never open the player or any of its components. It can be dangerous for you or certain fragile components.
You could receive an electric shock or touch the laser beam. Do not place your eyes close to the opening of
the disc tray or any other opening to look inside the player.
3. For your safety
Be careful handle your discs with care. Hold a disc whit finger on the border or hole. Always place disc
with the label facing upward (in case of a single side disc ). Always use a soft cloth to clean disc if
necessary, wipe from the centre to the border. Always put disc back into their cases after playing and store
in vertical position. Always place the disc properly into the tray using the proper guide area. Never use
record cleaning sprays, benzine, static electricity liquids or any other solvent, if the disc surface is dirty.
Wipe gently with a soft damp(water only) cloth, never wipe the disc in a circular motion, since circular
scratches are likely to occur and could case noise during playback.
4. Disc
The battery used in this product contains the chemicals that are harmful to the environment.
Do not dispose of batteries in the general household waster. It is recommended that the replacement
of the battery should be done by technician.
5. Battery
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
6. Maintenance of cabinet
1
2 3
4 5
Before You Start
Accessories
Install Batteries in the
Remote If remote doesn’t operate
properly:
Remote Control
User’s Manual
Batteries for
Remote Control (AA Size)
Video/Audio Cable
1
Open the battery cover on the
back of the remote.
2
Insert two AA batteries. Make
sure that the polarities (+ and -)
are aligned correctly.
3
Replace the battery cover.
• Check the polarity + - of the batteries
(Dry-Cell)
• Check if the batteries are drained.
• Check if remote sensor is blocked by
obstacles.
• Check if there is any fluorescent
lighting nearby.
TABLE OF CONTENTS
General Features ..............................................................................................6
Disc Type and Characteristics .......................................................................... 7
Description-Front Panel ....................................................................................8
Description-Rear Panel ....................................................................................9
Tour of the Remote Control..............................................................................10
Choosing a Connection ..................................................................................12
Playing a Disc................................................................................................14
Using the Search & Skip Functions............................................................
16
Using the Display Function..............................................................................17
Repeat Play ..................................................................................................18
Program Play & Random Play ........................................................................19
S.FIT Play ......................................................................................................20
Digest Play ....................................................................................................21
Slow Repeat play ..........................................................................................22
Using the Disc View Function..........................................................................23
Selecting the Audio Language ........................................................................24
Selecting the Subtitle Language ......................................................................25
Changing the Camera Angle..........................................................................26
Using the Bookmark Function..........................................................................27
Using the Zoom and 3D Sound Functions........................................................................28
Using the Setup Menu ....................................................................................29
Setting Up the Language Features ..................................................................30
Setting Up the Parental Control ......................................................................32
Setting Up the Audio Options ........................................................................33
Setting Up the Display Options ......................................................................34
Troubleshooting..............................................................................................35
Specifications ................................................................................................36
Warranty ......................................................................................................37
4 5
SETUP
SETUP CONNECTIONS BASIC
FUNCTIONS ADVANCED
FUNCTIONS CHANGING
SETUP MENU REFERENCE
General Features
Disc Type and Characteristics
Excellent Sound
Dolby Digital, a technology
developed by Dolby Laboratories provides
crystal clear sound reproduction.
Screen
Video with MPEG-2 compression technology.
Both regular and widescreen(16:9) pictures
can be viewed.
Slow Motion
An important scene can be viewed in slow
motion.
Programmed Play
You can program tracks to play in desired
order.
Parental Control
The parental control allows users to set the
level necessary to prohibit children from
viewing harmful movies such as those with
violence, adult subject matter, etc.
Various On-Screen Menu Functions
You can select various
languages(Audio/Subtitle) and screen
angles while enjoying movies.
Repeat
You can repeat a song or movie simply by
pressing the REPEAT button.
COPY PROTECTION
Disc Markings
Play Region Number
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player
directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD
discs.
• This product incorporates copyright protection technology that is protected by methods claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
This DVD player is capable of playing the following types of discs with the
corresponding logos:
12 Cm
8 Cm
Single-sided
240 min.
Double-sided
480 min.
Single-sided
80 min.
Double-sided
160 min.
Audio
+
Video
Audio
+
Video
Audio
• CD is recorded as a
Digital Signal with better
audio quality, less
distortion and less
deterioration of audio
quality over time.
• Video with CD sound, VHS
quality & MPEG-1
compression technology.
• DVD contains excellent sound
and video due to Dolby Digital
and MPEG-2 system.
• Various screen and audio
functions can be easily
selected through the on-
screen menu.
VIDEO-CD
AUDIO-CD
12 Cm
8 Cm
74 min.
20 min.
12 Cm
8 Cm
74 min.
20 min.
Disc Types
(Logos) Recording
Types Disc Size Max.
Playing Time Characteristics
DVD
* DO NOT play CD-ROM, CD-I, CD-R and DVD-ROM in this player!
(CDGs play audio only, not graphics.)
~DIGITAL
SOUND
STEREO
PAL
• Play
Region
Number
• PAL broadcast
system in U.K,
France,
Germany, etc.
• Dolby
Digital disc • Stereo disc • Digital
Audio disc • DTS disc
Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc
to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
6 7
SETUP
SETUP
Description-Front Panel Description-Rear Panel
Front Panel Controls
Rear Panel
Front Panel Display
STANDBY / ON
• When the unit is first plugged in, the indicator lights.
When STANDBY/ON is pressed on again, the light
goes out and the player is turned on.
DISC TRAY
• Load the disc here.
DISPLAY
• Operation indicators are displayed here.
OPEN/CLOSE
• Press to open and close the disc tray.
PLAY/PAUSE
• Begin or pause disc play.
STOP
• Stops disc play.
SKIP
• Use to skip a scene or music.
Angle indicator. You can select multiple angles
of a scene recorded by different cameras.
Disc type indicators
Reverse play / Pause / Forward play
Lights when 3D surround is turned on.
DVD : Title number
DVD : Chapter number.
Video/Audio CD : Track number
Repeat play mode
Linear PCM audio output
PAL indicator
Dolby Digital Disc
DTS (Digital Theater System) output
MPEG-2 Audio output
Displays various messages concerning
operations such as PLAY, STOP, LOAD, RANDOM, ...
no DISC : No disc loaded.
OPEN : The disc tray is open.
LOAD : Player is loading disc
information.
RL
DIGITAL AUDIO OUT JACKS
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
ANALOG AUDIO OUT JACKS
• Connect to the Audio input jacks of your television, audio/video receiver, or VCR.
VIDEO OUT JACK
• Use a video cable to connect to the Video input jack on your television.
S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality
picture. The S-Video must be selected in the VIDEO OUT SELECT.
VIDEO OUT SELECT SWITCH
• Use the switch to set video out.
• If Scart Jack is selected, S-Video will not work.
• If S-Video is selected, Scart Jack will not work.
SCAT JACK
• Connect to a TV with scart input jack.
1
2
3
4
5
6
71
2
3
4
5
6
8 9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
SETUP
SETUP
Tour of the Remote Control Tour of the Remote Control
DVD Function Buttons
DVD POWER Button
NUMBER Buttons
STEP Button
• Advances play one frame at a time.
ZOOM Button
S.FIT Button
SEARCH Buttons
• Allows you to search forward/backward
through a disc.
STOP Button
MENU Button
• Brings up the Disc menu.
TOP MENU Button
• Accesses a music or video display directly.
CLEAR Button
• Use to remove menus or status displays
from the screen.
BOOKMARK Button
SETUP Button
• Brings up the DVD player’s Setup menu.
OPEN/CLOSE Button
3D SOUND Button
DIGEST Button
PLAY/PAUSE Button
• Begin/Pause disc play.
SKIP Buttons
• Use to skip the title, chapter, or track.
RETURN Button
• Returns to a previous menu.
DISPLAY Button
• Displays the current disc mode.
ENTER/DIRECTION Button
(UP/DOWN or LEFT/RIGHT Button)
• This button functions as a toggle switch.
ANGLE Button
• Use to access various camera angles on a DVD.
MODE Button
• Allows you to program a specific order.
SUBTITLE Button
AUDIO Button
• Use this button to access various audio
functions on a disc.
A-B REPEAT Button
• Use to mark a segment to repeat between
A and B.
REPEAT Button
• Allows you to repeat play a title,
chapter, track, or disc.
VOL.CON. Button
• To control the master volume of the player.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
10 11
SETUP
SETUP
Choosing a Connection Choosing a Connection
The following show examples of connections commonly used to connect the DVD player with a
TV and other components.
Before Connecting the DVD Player
Connection to a TV (For Video)
Connection to an Audio System
• Always turn off the DVD player, TV, and other components before you
connect or disconnect any cables.
• Refer to the owner’s manual of the additional components you are connecting for
more information on those particular components.
Method 1 Method 2
Analog Audio Out
Dolby Digital Decoder
Digital Audio Input Jack
2ch Amplifier
Audio Input Jacks
Digital Audio Out
AUDIO
DVD
TV (Normal, Widescreen, Projection, etc..)
Good picture
Basic Audio Better picture Best picture
Method 1 Method 2 Method 3
Audio Output Jacks
OR
OR
OR
AV Cable S-Video
Cable Scart Cables
(not included)
Video Output Jack S-Video Jack Scart Jack
DVD
TV
• Method 1 DVD Player + TV with Video Input Jack
• Method 2 DVD Player + TV with S-Video Input Jack
(If S-Video is selected in the VIDEO OUT SELECT.)
• Method 3 DVD Player + TV with Component Video Jacks (Audio & Video)
(If Scart Jack is selected in the VIDEO OUT SELECT.)
NOTE
• If Scart Jack is selected, S-Video will not work.
• If S-Video is selected, Scart Jack will not work.
12 13
CONNECTIONS
Playing a Disc Playing a Disc
Before Play
Play
RESUME function
• Turn on your TV and press the TV/VIDEO button to select the video
mode.
• Turn on your Audio System and select AUX, CD or DVD.
After plugging in the player, the first time you
press the DVD POWER button, this screen comes
up :
If you want to select the language, press a NUMBER button. (This screen
will only appear the very first time you plug in the player.)
1
1
Press the OPEN/CLOSE button.
The STANDBY indicator light goes out and the tray opens.
2
2
Place a disc gently into the tray with the disc’s label
facing up.
3
3
Press the PLAY/PAUSE button or OPEN/CLOSE button
to close the disc tray.
4
4
Stopping Play
Press the STOP button during play.
5
5
Removing Disc
Press the OPEN/CLOSE button.
6
6
Pausing Play
Press the PLAY/PAUSE or STEP button on the remote during play.
- Screen stops, no sound.
- To resume again, press PLAY/PAUSE button once again.
When you stop disc play, the player remembers where you stopped, so when you press PLAY again, it will pick up
where you left off (unless the disc is removed, the STOP button is pressed twice or the player is unplugged.).
• If the player is left for 5 minutes in pause mode, it will stop.
• If the player is left in the stop mode for more than one minute without any user interaction, a screen
saver will be activated, and the TV screen will fade in and out repeatedly. Press the PLAY button to
resume normal play.
• This icon indicates an invalid button press.
NOTE
7
7
Step Motion Play (Except CD).
Press the STEP button on the remote during play.
- Each time the button is pressed, a new frame will appear.
- No sound is heard during STEP mode.
- Press PLAY/PAUSE to resume normal play.
(You can only perform step motion play in the forward direction.)
8
8
Slow Motion Play (Except CD).
Press the FWD SEARCH button on the remote during PAUSE or STEP mode.
- By pressing the FWD SEARCH button, you can select slow motion play for 1/8, 1/4
or 1/2 of normal speed.
- No sound is heard during slow mode.
- Press PLAY/PAUSE to resume normal play.
- Reverse slow motion play is not possible on this unit.
14 15
BASIC
FUNCTIONS
Using the Search & Skip Functions Using the Display Function
During play, you can search quickly through a chapter or track or use the skip
function to jump to the next selection.
Searching through a Chapter or Track
Skipping Tracks
1
1
During play, press the FWD or REV SEARCH
button on the remote.
• Press the REVERSE or FORWARD SEARCH button on the
remote and press again to search at a faster
speed(2X/4X/8X/16X/32X/128X normal speed, in
order) on the DVD.
• Press the REVERSE or FORWARD SEARCH button on the
remote and press again to search at a faster
speed(4X/8X/normal speed in order) on VCD and CD.
• To return to normal speed play, press the PLAY/ PAUSE
button.
2
2
During play, press the NEXT SKIP or BACK SKIP
button.
• When playing a DVD, if you press the NEXT SKIP button,
it moves to next chapter. If you press the BACK SKIP button, it
moves to the beginning of the chapter. One more press
makes it move to the beginning of the previous chapter.
• When playing a VCD 2.0 in MENU OFF mode, a VCD 1.1
or a CD, if you press the NEXT SKIP button, it moves to next
track. If you press the BACK SKIP button, it moves to the
beginning of the track. One more press makes it move to the
beginning of the previous track.
• If a track exceeds 15 minutes when playing a VCD and you
press the NEXT SKIP button, it moves forward 5 minutes. If you
press the BACK SKIP button, it moves backward 5 minutes.
• When playing a VCD 2.0 in the MENU MODE or Track View
function, if you press the NEXT SKIP button, it moves to the
next MENU or the next Track View display.
If you press the BACK SKIP button, it moves to the previous
MENU or the previous Track View display. (See page 23.)
NOTE
• Depending on the disc, audio may
not be heard when a disc is in 2X
play mode.
When Playing a DVD
When Playing a CD/VCD
1
1
During play, press the DISPLAY button
on the remote.
- Current title, chapter number and elapsed time
will be displayed.
• Use the LEFT/RIGHT button to select a title or a
chapter number.
Use the UP/DOWN button or Number buttons to
enter a different title or chapter number, then
press the ENTER button.
• To enter the time from which you want to start,
use the LEFT/RIGHT button to select, then use the
Number buttons to enter the time. Then press the
ENTER button.
2
2
Press the DISPLAY button on the remote
twice.
- Current audio, subtitle and volume control will
appear.
- To make the screen disappear, press the DISPLAY
button again.
1
1
During play, press the DISPLAY button
on the remote.
- Current track number, elapsed time and volume
control will be displayed.
• Use the LEFT/RIGHT button to select a track.
Use the UP/DOWN button or Number buttons
to enter a different track number, then press the
ENTER button.
• To enter the time from which you want to start,
use the LEFT/RIGHT button to select, then use
the Number buttons to enter the time. Press the
ENTER button.
- To make the screen disappear, press the DISPLAY
button again.
DVD T:01 C:02 0:01:09
5.1CHENG ENG Off 64
VCD T:01 0:06:54 64
CD T:01 0:06:54 64
64
What is a Chapter?
Each Title on a DVD is usually divided into
chapters (similar to tracks on an audio CD).
What is a Title?
A DVD may contain several different titles.
For example, if a disc contains four different
movies, each might be considered a title.
NOTE
16 17
VCD
(Menu off)
VCD
(Menu on)
CD
BASIC
FUNCTIONS
DVD
VCD
CD
2X, 4X, 8X, 16X, 32X, 128X
4X, 8X
2X, 4X, 8X
Repeat Play Program Play & Random Play
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc
When playing a DVD
1
1
Press the REPEAT button on the remote. Repeat
screen appears.
2
2
Select Chapter, Title or A-B using the
LEFT/RIGHT button.
- A-B Repeat
• Press the REPEAT button. Select A-B on screen with the
LEFT/RIGHT button or press the A-B button on the remote.
• Press ENTER at the point where you want the repeat play to
start (A). The B is automatically highlighted.
• Press ENTER at the point where you want the repeat play to
stop (B).
3
3
Press ENTER.
4
4
To return to normal play, press REPEAT again,
then press the LEFT/RIGHT button to select Off
and press ENTER.
Off Chapter Title A-B
Off Track Disc A-B
PROGRAM RANDOM
NOTE
• DVD repeats play by chapter or title, CD and VCD repeat play by disc or track.
• Depending on the disc, the Repeat function may not work.
• If the title or track is completed before marking the end (B), the end of title or track becomes B automatically.
• When in VCD 2.0 mode (MENU ON mode), this function does not work.
NOTE
• Depending on the disc, the Program and Random Play function may not work.
• When in VCD 2.0 mode (MENU ON mode), these functions do not work.
• To resume normal play, press the CLEAR button.
DVD
VCD/CD
Program Play (DVD/VCD/CD)
Random Play (DVD/VCD/CD)
1
1
Press the MODE button.
2
2
Use the LEFT/RIGHT button to select PROGRAM.
Press the ENTER button.
3
3
Use the LEFT/RIGHT button to select the first
chapter (or track) to add to the program. Press
the ENTER button. The selection numbers appear
in the Program Order box.
4
4
Press the PLAY/PAUSE button. The disc will be
played in programmed order.
1
1
Press the MODE button.
2
2
Use the LEFT/RIGHT button to select RANDOM.
Press the ENTER button.
The disc will be played in random order.
18 19
BASIC
FUNCTIONS
20 21
S.FIT Play
Digest Play
Screen Fit Play
1
1
During play, Press the DIGEST button.
- You'll see the 9 individual windows representing each of the
chapters on the TV screen.
- When each window is displayed, the first 3 seconds of the
chapter will be played.
2
2
Press Up/Down/Left/Right button to select the
window you'd like to see, and press the ENTER
button.
•Up to 9 windows(chapters) can be displayed on the screen
at a time.
Press the 'Skip' button for the next 9 chapters if the movie
has more than 9.
1
1
Press Screen FIT button on remote control.
- Allows you to eliminate the black bars in the top and bottom
of the screen when a movie is playing in the Widescreen
format(16:9).
- Screen Fit will not work when Zoom mode is active.
(you can not remove the black bars in screen)
However, Zoom mode will work when Screen Fit is active.
NOTE
• Various aspect ratios are available only in multiple screen format discs.
• This function does not work when a DVD has been recorded with a multi-camera angle format.
• On some DVDs, the black bars cannot be eliminated due to their aspect ratio.
Digest Play
01
04
07
02
05
08
03
06
09
DIGEST
10
13
11
14
12
DIGEST
skip button
NOTE
• You can play the DVD player starting with the desired chapter after directly moving to the scene you want.
• 'DIGEST' may not operate depending on the disc in use.
ADVANCED
FUNCTIONS
Slow Repeat play
When playing a DVD
1
1
Press the PLAY/PAUSE button.
2
2
Press the F/SEARCH button to choose the play speed between 1/8X, 1/4X, and
1/2X of normal.
3
3
Press the REPEAT (A-B) button to select the point where the function starts. (A)
4
4
Press the REPEAT (A-B) button to select the point where the function ends. (B)
Using the Disc View Function
Track View (VCD)
Index View (VCD)
Displays the beginning view of each track and the
track number.
1
1
During play, press the TOP MENU button.
2
2
Press the UP/DOWN button to select TRACK
VIEW. Press the ENTER button.
3
3
Select the desired view by pressing the
UP/DOWN or LEFT/RIGHT buttons.
4
4
Press the ENTER button.
Displays the equally divided 9 views of the current
playing track.
1
1
During play, press the TOP MENU button.
2
2
Press UP/DOWN button to select INDEX
VIEW. Press the ENTER button.
3
3
Select the desired view by pressing
UP/DOWN or LEFT/RIGHT buttons.
4
4
Press the ENTER button.
Disc View
1 Track View
2 Index View
ENTER
TRACK VIEW
01
04
07
02
05
08
03
06
09
INDEX VIEW
01
04
07
02
05
08
03
06
09
example
example
NOTE
• In stop mode on VCD, press the TOP MENU button and the TRACK VIEW will be displayed.
• When pressing the TOP MENU button with a DVD; the disc’s TITLE MENU function comes up. A disc must
have at least two titles for the TITLE MENU function to work.
• When pressing the TOP MENU button with a CD; the unit enters the INTRO mode. INTRO lets you listen
to the beginning of each track for about 10 seconds.
23
22
NOTE
• The disc will play only from A to B repeatedly at the speed you chose.
• To terminate the function, press the 'CLEAR' button or the 'REPEAT (A-B)' button again.
This feature allows you slowly repeat scenes containing sports, dancing,
musical instruments being played etc. so you can study them more closely.
ADVANCED
FUNCTIONS
Selecting the Audio Language
You can select a desired language quickly and easily with the AUDIO button.
Using the AUDIO button
1
1
Press the AUDIO button.
2
2
Use the UP/DOWN button to select the
desired language on a DVD.
- The audio languages are represented by
abbreviations.
3
3
Use the UP/DOWN button to select
Stereo, Right or Left. (On VCD/CD)
Stereo
ENG
DOLBY DIGITAL 5.1CH
NOTE
• This function depends on what languages are encoded on the disc and may not work with all DVDs.
• A DVD disc can contain up to 8 audio languages.
• How to have the same audio language come up whenever you play a DVD;
Refer to “Setting Up the Language Features” on page 31.
24
Selecting the Subtitle Language
You can select a desired subtitle quickly and easily with the SUBTITLE button.
Using the SUBTITLE button
1
1 Press the SUBTITLE button.
2
2 Use the UP/DOWN button to select the
desired subtitle language.
3
3 Use the LEFT/RIGHT button to determine
whether or not the subtitle will be displayed.
- Initially, the subtitling will not appear on screen.
- The subtitle languages are represented by abbreviations.
ENG
ENG
NOTE
• This function depends on what languages are encoded on the disc and may not work with all DVDs.
• A DVD disc can contain up to 32 subtitle languages.
• How to have the same subtitle language come up whenever you play a DVD;
Refer to “Setting Up the Language Features” on page 31.
25
DVD
VCD
ADVANCED
FUNCTIONS
Changing the Camera Angle
When a DVD contains multiple angles of a particular scene, you can select the Angle function.
Using the ANGLE button
Press the ANGLE button to see if an ANGLE ( )
mark is present at the upper right hand corner of
the screen.
1
1 When an ANGLE mark is shown, press the
ANGLE button, then an ANGLE select icon
will appear at the upper left hand corner
of the screen.
2
2 Use the UP/DOWN button to select the
desired screen angle.
3
3 To turn off the display, press the ANGLE
button again.
example
64
example
Master Volume Control Function
1
1
Press the VOL.CON. button. Use the
UP/DOWN button to select a suitable
volume.
- Master Volume Control function lets you adjust the
volume of the player’s output. This is useful for matching
the player’s output level to other equipment in your system.
- Volume control is only operative when using the
Analog Audio outputs.
- There are up to 64 levels. Lowering each level
reduces the audio level by 0.5dB.
Using the Bookmark Function
The Bookmark function lets you select parts of a DVD or VCD (MENU OFF mode) so that you
can quickly find the section at a later time.
Using the Bookmark Function (DVD/VCD)
1
1
During play, press the BOOKMARK button on
the remote. The Bookmark icons will be
displayed.
2
2
Use the LEFT/RIGHT button to move to the
desired bookmark icon.
3
3
When you reach the scene you want to mark,
press the ENTER button. The icon will change to
a number (1, 2, or 3).
4
4
Press the BOOKMARK button to turn off the
display.
Recalling a Marked Scene
1
1
During play, press the BOOKMARK button on
the remote.
2
2
Use the LEFT/RIGHT button to select a marked
scene.
3
3
Press the PLAY/PAUSE button to skip to the
marked scene.
Clearing a Bookmark
1
1
During play, press the BOOKMARK button
on the remote.
2
2
Use the LEFT/RIGHT button to select the
bookmark number you want to delete.
3
3
Press the CLEAR button to delete a bookmark
number. Press the BOOKMARK button to turn
off display.
NOTE
• Up to three scenes may be
marked at a time.
• When in VCD 2.0 mode (MENU
ON mode), this function does not
work.
• Depending on the disc, the
Bookmark function may not work.
26 27
ADVANCED
FUNCTIONS
NOTE
•The Master Volume must be reset for each disc you play. Once a disc is done playing, the Master Volume returns
to the default position (64).
Using the Zoom & 3D Sound Functions
Using the Zoom Function (DVD/VCD)
1
1
During play or pause mode, press the
ZOOM button on the remote. A square will
be displayed on screen.
2
2
Use the UP/DOWN or LEFT/RIGHT
button to select the part of the screen you
want to zoom in on.
3
3
Press the ENTER button.
- During DVD play, press ENTER to zoom in
2X/4X/2X/Normal in order.
- During VCD play, press ENTER to zoom in
2X/normal in order.
Using the 3D Sound Function
The simulated surround effect (SPATIALIZER N-2-2)
depends on the disc contents. If you connect the
unit to your stereo system, you can enhance sound
quality and produce a greater surround effect.
This feature is useful when you are using the DVD
player with a two channel stereo through the
analog outputs.
(Discs which are recorded with LPCM or DTS will
not work. When the DIGITAL OUTPUT is set to BIT
STREAM in the SETUP MENU, the 3D Sound
function will not work.)
1
1
During play, press the 3D SOUND button.
The 3D SOUND mark will be displayed on
screen. (Be sure the DIGITAL OUTPUT is set to
PCM.)
2
2
Press the UP/DOWN button to turn the 3D
Sound feature on or off.
NOTE
• 3D Sound is possible only on discs
recorded using DOLBY SURROUND or
DOLBY DIGITAL. However, some of
these discs do not contain rear channel
sound signals.
• Depending on the disc, the Zoom and
3D Sound function may not work.
Using the Setup Menu
The Setup menu lets you customize your DVD player by allowing you to select various
language preferences, set up a parental level, even adjust the player to the type of television
screen you have.
1
1
With the unit in Stop mode, press the SETUP button
on the remote.
Player Menu : Setup of the Display Language
Use the Player preference menu to select the
language for the player’s on-screen displays.
Disc Menu : Setup of the Menu Language
Use the Menu preference menu to select the language you want a
DVD’s disc menu to be displayed in.
Audio : Setup of the Audio Language
Use the Audio preference menu to select the soundtrack language.
Subtitle : Setup of the Subtitle Language
Use the Subtitle preference menu to select the language the disc’s
subtitles are to be displayed in.
Parental : Setup of the Parental Level
Allows users to set the level necessary to prevent children from
viewing unsuitable movies such as those with violence, adult subject
matter, etc.
Audio Options : Setup of the Audio Options
Display Options : Setup of the Display Options
Use to select which type of screen you want to watch and several
display options.
2
2
Use the UP/DOWN button on the remote to access
the different features.
3
3
Press the ENTER button to access the sub features.
To make the setup screen disappear after setting up, press the
SETUP button again. NOTE
Depending on the disc, some
Setup Menu selections may not
work.
28 29
CHANGING
SETUP MENU
Setting Up the Language Features
Using the Player Menu Language
Using the Disc Menu Language
If you set the player menu, disc menu, audio and subtitle language in advance, they will come
up automatically every time you watch a movie.
1
1
With the unit in Stop mode, press the
SETUP button.
2
2
Use the UP/DOWN button to select the
PLAYER MENU.
3
3
Press the ENTER button.
4
4
Use the UP/DOWN button to select
‘English’.
5
5
Press the ENTER button.
- English is selected and the screen returns to SETUP
MENU.
- To make the SETUP MENU disappear, press the
RETURN button.
e.g
Setting up in English.
e.g
Setting up in English.
This function changes the text language only
on the disc menu screens.
1
1
With the unit in Stop mode, press the
SETUP button.
2
2
Use the UP/DOWN button to select
DISC MENU.
3
3
Press the ENTER button.
4
4
Use the UP/DOWN button to select
‘English’.
- Select “Others” if the language you want is not
listed.
5
5
Press the ENTER button.
- English is selected and the screen returns to SETUP
MENU.
Setting Up the Language Features
Using the Audio Language
Using the Subtitle Language
1
1
With the unit in Stop mode, press the SETUP
button.
2
2
Press the UP/DOWN button to move to AUDIO.
3
3
Press the ENTER button.
4
4
Press the UP/DOWN button to select ‘English’ .
- Select “Original” if you want the default soundtrack language
to be the original language the disc is
recorded in.
- Select “Others” if the language you want is not listed.
5
5
Press the ENTER button.
- English is selected and the screen returns to SETUP MENU.
1
1
With the unit in Stop mode, press the SETUP
button.
2
2
Use the UP/DOWN button to select SUBTITLE.
3
3
Press the ENTER button.
4
4
Use the UP/DOWN button to select ‘ENGLISH’.
- Select “Automatic” if you want the subtitle language to be
the same as the language selected as the audio preference.
- Select “Others” if the language you want is not listed. Some
discs may not contain the language you select as
your initial language; in that case the disc will use its
original language setting.
5
5
Press the ENTER button.
- English is selected and the screen returns to SETUP MENU.
NOTE
• If the selected language is not
recorded on the disc, the original
pre-recorded language is selected.
• Howto make the SETUP MENU
disappear or return to menu screen
during set up; Press RETURN button.
30 31
CHANGING
SETUP MENU
Setting Up the Parental Control
The Parental Control function works in conjunction with DVDs that have been assigned a
rating - which helps you control the types of DVDs that your family watches. There are up
to 8 rating levels on a disc.
1
1
With the unit in Stop mode, press SETUP button.
The Setup Menu screen appears.
2
2
Use UP/DOWN to select Parental. Press ENTER.
The Parental Control screen appears.
3
3
Use LEFT/RIGHT to select Yes if you want to use
a password. Press ENTER. The Enter Password
screen appears.
4
4
Enter your password. The Re-enter Password
screen appears to confirm the password. Enter
your password again. The Parental Control
screen appears.
5
5
About the Rating Level ;
The Rating Level will work only when Use
Password is set to Yes. To unlock the player,
use LEFT/RIGHT to select No. Use UP/DOWN
to select Rating level. Press ENTER.
- Use UP/DOWN to select the level(e.g. Level 6) and press
ENTER. Discs that contain Level 7 will now not play.
- To cancel the rating level, use LEFT/RIGHT to select No in
Use Password.
6
6
About the Change Password ;
- Use UP/DOWN to select Change Password. The Change
Password screen appears.
- Enter your new password. Re-enter the new password
again.
e.g
Setting up in LEVEL6.
NOTE
• How to make the SETUP MENU disappear or return to menu screen during set up;
Press RETURN button.
• If you have forgotten your password, see Forget Password in the Troubleshooting Guide.
32 33
Setting Up the Audio Options
1
1
With the unit in Stop mode, press the SETUP
button.
2
2
Use the UP/DOWN button to select AUDIO OPTIONS.
Then press the ENTER button.
3
3
Use the UP/DOWN button to select the desired item.
Then press the LEFT/RIGHT button.
Dolby Digital Out
1. PCM :
Converts to PCM(2CH) audio.
Select PCM when using the Analog Audio Outputs.
2. Bitstream :
Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital
Audio Output.
NN
NNOO
OOTT
TTEE
EE: Be sure to select the correct Digital Output or
no audio will be heard.
DTS
1. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.
2. Off : Doesn’t output digital signal.
2X Scan Audio
1. On : Turns 2X audio on.
2. Off : Turns 2X audio off.
Though 2X Scan Audio is ON in the SETUP MENU,
no sound will be heard on discs which are recorded with
LPCM, DTS or MPEG-2 Audio.
MPEG-2 Digital Out
1. PCM :
Converts to PCM(2CH) audio.
Select PCM when using the Analog Audio
Outputs.
2. Bitstream :
Converts to MPEG-2 Digital Bitstream
(5.1CH or 7.1CH).
Select Bitstream when using the Digital
Audio Output.
Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
NOTE
• How to make the SETUP MENU disappear or return to menu screen during set up;
Press RETURN button.
• Certain audio features of this product manufactured under a license from Desper
Products, Inc. Spatializer®and circle-in-square device are trademarks owned by Desper
Products, Inc.
• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of
Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories Inc. All rights
reserved.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
CHANGING
SETUP MENU
Setting Up the Display Options
1
1
With the unit in Stop mode, press the SETUP button.
2
2
Use the UP/DOWN button to select DISPLAY OPTIONS.
Then press the ENTER button.
3
3
Use the UP/DOWN button to select the desired item. Then
press the LEFT/RIGHT button.
TV Aspect
Depending on the type of television you have, you may want to adjust
the screen setting (aspect ratio).
1. 4:3 Letter Box :
Select when you want to see the total 16:9 ratio screen DVD
supplies, even though you have a TV with a 4:3 ratio screen.
Black bars will appear at the top and bottom of the screen.
2. 4:3 Pan-Scan :
Select this for conventional size TVs when you want to see the
central portion of the 16:9 screen. (Extreme left and right side of
movie picture will be cut off.)
3. 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
Still Mode
These options will help prevent picture shake in still mode and display
small text clearer.
1. Field : Select this feature when the screen shakes in the Auto mode.
2. Frame : Select this feature when you want to see small letters more clearly
in the Auto mode.
3. Auto : When selecting Auto, Field/Frame mode will be automatically converted.
Screen Messages
Use to turn on-screen messages On or Off.
Front Display
Adjust the brightness of the unit’s front panel display.
1. Bright : Makes the Front Panel Display bright.
2. Dim : Makes the Front Panel Display dim.
3. Auto Dim : Makes the Front Panel Display dim automatically when playing a DVD.
Black Level
Adjusts the brightness of the screen.(On/Off)
Quasi-PAL
Depending on a disc, you can play a NTSC DVD disc by Quasi-PAL mode.
SCART Out
1.RGB : Sends RGB signal from the AV JACK(SCART terminal).
2.VIDEO : Sends COMPOSITE VIDEO signal from the AV JACK (SCART terminal).
3.S-VIDEO : Sends S-VIDEO signal from the AV JACK (SCART terminal).
NOTE
• How to make the SETUP
MENU disappear or return to
menu screen during set up;
Press RETURN button.
34 35
Troubleshooting
Before requesting service (troubleshooting), please check the following.
No operations can be
performed with remote.
The screen ratio cannot be
changed.
No audio.
Play mode differs from the
Setup Menu selection.
Disc Menu doesn’t appear.
The icon appears on
screen.
Forgot password
If you experience other
problems.
5.1 channel sound is not
being reproduced.
Disc does not play.
• Check the batteries in the remote. May need replacing.
• Operate the remote control at a distance of no more than 20 feet.
• Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote to reset it.
Reinstall batteries and try remote again.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
• 5.1 channel sound is reproduced only when the following conditions
are met. :
1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the “Dolby 5.1 ch” mark on
the outside.
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
• The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is
out of range.
• Check if the disc has a Menu.
• Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding function.
• The Screen Ratio is fixed on your DVDs.
• Make sure you have selected the correct Digital Output in the Audio
Options Menu.
• Press power on from a cold start with no disc in the unit. Press the STOP
and PLAY buttons simultaneously on the front panel for three seconds. The
Select Menu Language display will appear. Select the desired language
button. Press the SETUP button on the remote control to select the Parental
Mode. The Parental Mode is now unlocked as indicated on the display.
Press the DOWN button to select Parental. Press ENTER and the Create
Password display will appear. You can now set your rating level and
change your password to a new number.
• Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
• If the problem still cannot be solved, please contact your nearest
authorized service center.
Action
Problem Page
P4
P 7
P 12
P 15
P 29~30
P 29~34
P 34
P 33
P 32
REFERENCE
Specifications
36 37
Power Requirements
Power Consumption
Weight
Dimensions
Operating Temperature Range
Operating Humidity Range
CD : 12Cm
(DIGITAL VERSATITLE DISC)
CD : 12Cm
(COMPACT DISC)
CD : 8Cm
(COMPACT DISC)
VCD : 12Cm
Composite Video
SCART JACK
SCART JACK
2 channel
*Frequency Response
*S/N Ratio
*Dynamic Range
*Total Harmonic Distortion
AC 230 V, 50 Hz
15 W
2.8 Kg
430mm ✕240mm ✕ 79mm
+41°F to +95°F
10 % to 75 %
Reading Speed : 11.45 ft/sec.
Approx. Play Time
(Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 3.9 to 4.6 ft/sec.
Maximum Play Time : 74 min.
Reading Speed : 3.9 to 4.6 ft/sec.
Maximum Play Time : 20 min.
Reading Speed : 3.9 to 4.6 ft/sec.
Maximum Play Time : 74 min. (Video + Audio)
2 channel : 1.0 Vp-p (75 Ωload)
R(Red) : 0.714 Vp-p (75 Ωload)
G(Green) : 0.714 Vp-p (75 Ωload)
B(Blue) : 0.714 Vp-p (75 Ωload)
Composite Video : 1.0 Vp-p (75 Ωload)
Luminance Signal : 1.0 Vp-p (75 Ωload)
Color Signal : 0.286 Vp-p (75 Ωload)
2 Channel : L(1/L), R(2/R)
L(1/L), R(2/R)
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
110 dB
100 dB
0.004 %
General
Disc
Video
Output
Audio
Output
• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
• Weight and dimensions are approximate.
*: Nominal specification
UNITED KINGDOM
This Samsung product is warranted for the period of twelve (12) months
from the original date of purchase, against defective materials and
workmanship. In the event that warranty service is required, you should
return the product to the retailer from whom it was purchased.
However, Samsung Authorised Dealers and Authorised Service Centres in
other EC Countries will comply with the warranty on the terms issued to
purchasers in the country concerned. In case of difficulty, details of our
Authorised Service Centres are available from:
Samsung Electronics (U.K.) Ltd.,
Euro Service Centre, Stafford Park 12,
TELFORD, Shropshire TF3 3BJ,
Tel: 01952) 292262, Fax: 01952) 207117
■WARRANTY CONDITIONS
1. The warranty is only valid if, when warranty service is required, the
warranty card is fully and properly completed and is presented with the
original invoice or sales slip or confirmation, and the serial number on
the product has not been defaced.
2. Samsung’s obligations are limited to the repair or, at its discretion,
replacement of the product or the defective part.
3. Warranty repairs must be carried out by Authorised Samsung Dealers or
Authorised Service Centres. No re-imbursement will be made for repairs
carried out by non Samsung Dealers and, any such repair work and
damage to the products caused by such repair work will not be covered
by this warranty.
4. This product is not considered to be defective in materials nor
workmanship by reason that it requires adaptation in order to conform to
national or local technical or safety standards in force in any Country
other than the one for which the product was originally designed and
manufactured. This warranty will not cover, and no re-imbursement will
be made for such adaptation nor any damage which may result.
38
Memo
REPUBLIC OF
IRELAND
5. This warranty covers none of the following:
a) Periodic check ups, maintenance and repair or replacement of parts
due to normal wear and tear.
b)Cost relating to transport, removal or installation of the product.
c) Misuse, including the faiure to use this product for its normal
purposes or incorrect installation.
d)Damage caused by Lightning, Water, Fire, Acts of God, War, Public
Disturbances, incorrect mains voltage, improper ventilation or any
other cause beyond the control of Samsung.
6. This warranty is valid for any person who legally acquired possession
of the product during the warranty period.
7. The consumers statutory rights in any applicable national legislation
whether against the retailer arising from the purchase contract or
otherwise are not affected by this warranty. Unless there is national
legislation to the contrary, the rights under this warranty are the
consumers sole rights and Samsung, its subsidiaries and distributors
shall not be liable for indirect or consequential loss or any damage to
records, compact discs, videos or audio taper or any other related
equipment or material.
SAMSUNG ELECTRONICS (U.K.) LTD.

Navigation menu