Samsung 4200 4200_EN User Manual To The 9ec776f2 E177 4744 41b1 52845d06e43f
User Manual: Samsung 4200 to the manual
Open the PDF directly: View PDF .
Page Count: 92
Download | ![]() |
Open PDF In Browser | View PDF |
© 2005 Samsung Electronics Co., Ltd. All rights reserved. This manual is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not responsible for any direct or indirect damages, arising from or related to use of this manual. • SCX-4200 is model names of Samsung Electronics Co., Ltd. • Samsung and Samsung logo are trademarks of Samsung Electronics Co., Ltd. • IBM and IBM PC are trademarks of International Business Machines Corporation. • PCL and PCL 6 are trademarks of Hewlett-Packard company. • Microsoft, Windows, Windows 98, Windows Me, Windows 2000, and Windows XP are registered trademarks of Microsoft Corporation. • TrueType, LaserWriter and Macintosh are trademarks of Apple Computer, Inc. • All other brand or product names are trademarks of their respective companies or organizations. 1 CONTACT SAMSUNG WORLDWIDE If you have any comments or questions regarding Samsung products, contact the Samsung customer care center. Country ARGENTINE Customer Care Center 0800-333-3733 Web Site www.samsung.com/ar AUSTRALIA 1300 362 603 www.samsung.com/au AUSTRIA 0800-SAMSUNG (726-7864) www.samsung.com/at Country LITHUANIA Customer Care Center 8-800-77777 Web Site www.samsung.com/lt LUXEMBURG 0035 (0)2 261 03 710 www.samsung.com/be MALAYSIA 1800-88-9999 www.samsung.com/my MEXICO 01-800-SAMSUNG (7267864) www.samsung.com/mx NETHERLANDS 0900 20 200 88 (€ 0,10/min) www.samsung.com/nl NEW ZEALAND 0800SAMSUNG(726-7864) www.samsung.com/nz NORWAY 815-56 480 www.samsung.com/no BELGIUM 0032 (0)2 201 24 18 www.samsung.com/be BRAZIL 0800-124-421 4004-0000 www.samsung.com/br CANADA 1-800-SAMSUNG (7267864) www.samsung.com/ca PANAMA 800-7267 www.samsung.com/latin CHILE 800-726-7864 (SAMSUNG) www.samsung.com/cl PHILIPPINES 1800-10-SAMSUNG (7267864) www.samsung.com/ph CHINA 800-810-5858 010- 6475 1880 www.samsung.com.cn POLAND 0 801 801 881 022-607-93-33 www.samsung.com/pl COLOMBIA 01-8000-112-112 www.samsung.com/co PORTUGAL 80 8 200 128 www.samsung.com/pt COSTA RICA 0-800-507-7267 www.samsung.com/latin PUERTO RICO 1-800-682-3180 www.samsung.com/latin 844 000 844 www.samsung.com/cz REP. DOMINICA 1-800-751-2676 www.samsung.com/latin REPUBLIC OF IRELAND 0818 717 100 www.samsung.com/uk RUSSIA 8-800-555-55-55 www.samsung.ru SINGAPORE 1800-SAMSUNG (7267864) www.samsung.com/sg SLOVAKIA 0800-SAMSUNG (726786) www.samsung.com/sk SOUTH AFRICA 0860 726 7864 (SAMSUNG) www.samsung.com/za SPAIN 902 10 11 30 www.samsung.com/es SWEDEN 0771-400 200 www.samsung.com/se SWITZERLAND 0800-7267864 www.samsung.com/ch/ TAIWAN 0800-329-999 www.samsung.com/tw 1800-29-3232 02-689-3232 www.samsung.com/th CZECH REPUBLIC Distributor pro Českou republiku : Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4 DENMARK 70 70 19 70 www.samsung.com/dk ECUADOR 1-800-10-7267 www.samsung.com/latin EL SALVADOR 800-6225 www.samsung.com/latin ESTONIA 800-7267 www.samsung.ee KAZAHSTAN 8-10-800-500-55-500 www.samsung.kz KYRGYZSTAN 00-800-500-55-500 FINLAND 030-6227 515 www.samsung.com/fi FRANCE 3260 SAMSUNG or 08 25 08 65 65 (€ 0,15/min) www.samsung.com/fr GERMANY 01805 - 121213 (€ 0,14/min) www.samsung.de THAILAND GUATEMALA 1-800-299-0013 www.samsung.com/latin TRINIDAD & TOBAGO 1-800-7267-864 www.samsung.com/latin HONG KONG 3698 4698 www.samsung.com/hk TURKEY 444 77 11 www.samsung.com.tr HUNGARY 06-80-SAMSUNG (7267864) www.samsung.com/hu INDIA 3030 8282 1800 110011 www.samsung.com/in/ INDONESIA 0800-112-8888 U.A.E 800-SAMSUNG (7267864) www.samsung.com/mea U.K 0870 SAMSUNG (7267864) www.samsung.com/uk www.samsung.com/id U.S.A. 1-800-SAMSUNG (7267864) www.samsung.com UKRAINE 8-800-502-0000 www.samsung.ua UZBEKISTAN 8-800-120-0400 www.samsung.com.uz VENEZUELA 0-800-100-5303 www.samsung.com/latin VIETNAM 1 800 588 889 www.samsung.com/vn ITALIA 800-SAMSUNG(7267864) 800-048989 www.samsung.com/it JAMAICA 1-800-234-7267 www.samsung.com/latin JAPAN 0120-327-527 www.samsung.com/jp LATVIA 800-7267 www.samsung.com/lv/ index.htm CONTENTS 1. Introduction Special features ..................................................................................................................... 1.1 Understanding component locations .......................................................................................... 1.2 2. Getting started Setting up your machine Finding more information ........................................................................................................ Selecting a location ................................................................................................................ Installing the toner cartridge ................................................................................................... Loading paper ....................................................................................................................... Making connections ................................................................................................................ Turning the machine on .......................................................................................................... 2.1 2.2 2.2 2.3 2.5 2.5 Setting up the machine system Overview of control panel menus ............................................................................................. 2.6 Changing the display language ................................................................................................. 2.6 Using the save modes ............................................................................................................. 2.6 Printer software overview Supplied printer software ........................................................................................................ 2.7 Printer driver features ............................................................................................................. 2.7 System requirements ............................................................................................................. 2.8 3. Loading original documents and paper Loading document .................................................................................................................. Selecting print materials ......................................................................................................... Loading paper ....................................................................................................................... Setting the paper size and type ................................................................................................ Selecting an output location .................................................................................................... 3.1 3.2 3.5 3.6 3.6 4. Copying Copying ................................................................................................................................ Changing the settings for each copy ......................................................................................... Changing the default settings .................................................................................................. Using special copy features ..................................................................................................... Setting the time out option ...................................................................................................... 4.1 4.1 4.2 4.2 4.3 5. Basic printing Printing a document ............................................................................................................... 5.1 Canceling a print job .............................................................................................................. 5.1 6. Scanning Scanning basics ..................................................................................................................... 6.1 7. Ordering toner cartridge Toner cartridges .................................................................................................................... 7.1 How to purchase .................................................................................................................... 7.1 3 8. Maintenance Printing reports ...................................................................................................................... Clearing memory ................................................................................................................... Cleaning your machine ........................................................................................................... Maintaining the toner cartridge ................................................................................................ Consumable and replacement parts .......................................................................................... 8.1 8.1 8.1 8.3 8.4 9. Troubleshooting Clearing paper jams ............................................................................................................... Understanding the Status LED ................................................................................................. Understanding display messages .............................................................................................. Solving other problems ........................................................................................................... 9.1 9.3 9.4 9.4 10. Specifications General specifications ........................................................................................................... 10.1 Scanner and copier specifications ........................................................................................... 10.1 Printer specifications ............................................................................................................ 10.2 4 Important Precautions and Safety Information 15. Adjust only those controls covered by the operating instructions. Improper adjustment of other controls may result in damage, and may require extensive work by a qualified service technician to restore the machine to normal operation. When using this machine, these basic safety precautions should always be followed to reduce risk of fire, electric shock and injury to people: 1. Read and understand all instructions. 2. Use common sense whenever operating electrical appliances. 16. Avoid using this machine during a lightning storm. There may be a remote risk of electric shock from lightning. If possible, unplug the AC power and telephone cord for the duration of the lightning storm. 3. Follow all warnings and instructions marked on the machine and in the literature accompanying the machine. 17. SAVE THESE INSTRUCTIONS. 4. If an operating instruction appears to conflict with safety information, heed the safety information. You may have misunderstood the operating instruction. If you cannot resolve the conflict, contact your sales or service representative for assistance. 5. Unplug the machine from the AC wall socket and/or telephone jack before cleaning. Do not use liquid or aerosol cleaners. Use only a damp cloth for cleaning. 6. Do not place the machine on an unstable cart, stand or table. It may fall, causing serious damage. 7. Your machine should never be placed on, near or over a radiator, heater, air conditioner or ventilation duct. 8. Do not allow anything to rest on the power. Do not locate your machine where the cords will be abused by persons walking on them. 9. Do not overload wall outlets and extension cords. This can diminish performance, and may result in the risk of fire or electric shock. 18. Use only No.26 AWG or larger telephone line cord. Laser Safety Statement The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 825. Class I laser products are not considered to be hazardous. The laser system and printer are designed so there is never any human access to laser radiation above a Class I level during normal operation, user maintenance or prescribed service condition. WARNING Never operate or service the printer with the protective cover removed from Laser/Scanner assembly. The reflected beam, although invisible, can damage your eyes. 10. Do not allow pets to chew on the AC power, telephone or PC interface cords. 11. Never push objects of any kind into the machine through case or cabinet openings. They may touch dangerous voltage points, creating a risk of fire or shock. Never spill liquid of any kind onto or into the machine. 12. Your machine may have a heavy cover for optimal pressure on the document for the best scanning and/or faxing (usually the flatbed-type machine). In this case, replace the cover after placing document on the scan glass, by holding and moving it down slowly until it seats on its location. 13. To reduce the risk of electric shock, do not disassemble the machine. Take it to a qualified service technician when repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly could cause electric shock when the unit is subsequently used. 14. Unplug the machine from the telephone jack, PC and AC wall outlet and refer servicing to qualified service personnel under the following conditions: •When any part of the power cord, plug or connecting cable is damaged or frayed. •If liquid has been spilled into the machine. •If the machine has been exposed to rain or water. •If the machine does not operate properly after instructions have been followed. •If the machine has been dropped, or the cabinet appears damaged. •If the machine exhibits a sudden and distinct change in performance. Ozone Safety During normal operation, this machine produces ozone. The ozone produced does not present a hazard to the operator. However, it is advisable that the machine be operated in a well ventilated area. If you need additional information about ozone, please request your nearest Samsung dealer. 5 Power Saver •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or experienced radio TV technician for help. This printer contains advanced energy conservation technology that reduces power consumption when it is not in active use. CAUTION: Change or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. When the printer does not receive data for an extended period of time, power consumption is automatically lowered. Recycling Canadian Radio Interference Regulations Please recycle or dispose of the packaging material for this product in an environmentally responsible manner. This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry and Science Canada. Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques de Classe B prescrites dans la norme sur le matériel brouilleur: “Appareils Numériques”, ICES-003 édictée par l’Industrie et Sciences Canada. Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) Fax Branding The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device to send any message via a telephone facsimile machine unless such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission the following information: This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. (1) the date and time of transmission (2) identification of either business, business entity or individual sending the message; and Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. (3) telephone number of either the sending machine, business, business entity or individual. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. The Telephone Company may make changes in its communications facilities, equipment operations or procedures where such action is reasonably required in the operation of its business and is not inconsistent with the rules and regulations in FCC Part 68. If such changes can be reasonably expected to render any customer terminal equipment incompatible with telephone company communications facilities, or require modification or alteration of such terminal equipment, or otherwise materially affect its use or performance, the customer shall be given adequate notice in writing, to allow the customer an opportunity to maintain uninterrupted service. Radio Frequency Emissions FCC Information to the User This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: •This device may not cause harmful interference, and •This device must accept any interference received, including interference that may cause undesired operation. Ringer Equivalence Number The Ringer Equivalence Number and FCC Registration Number for this machine may be found on the label located on the bottom or rear of the machine. In some instances you may need to provide these numbers to the telephone company. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. The Ringer Equivalence Number (REN) is a measure of the electrical load placed on the telephone line, and is useful for determining whether you have “overloaded” the line. Installing several types of equipment on the same telephone line may result in problems making and receiving telephone calls, especially ringing when your line is called. The sum of all Ringer Equivalence Numbers of the equipment on your telephone line should be less than five in order to assure proper service from the telephone company. In some cases, a sum of five may not be usable on your line. If any of your telephone equipment is not operating properly, you should immediately remove it from your telephone line, as it may cause harm to the telephone network. 6 EC Certification WARNING: FCC Regulations state that changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. In the event that terminal equipment causes harm to the telephone network, the telephone company should notify the customer that service may be stopped. However, where prior notice is impractical, the company may temporarily cease service, providing that they: a) promptly notify the customer. b) give the customer an opportunity to correct the equipment problem. c) inform the customer of the right to bring a complaint to the Federal Communication Commission pursuant to procedures set out in FCC Rules and Regulations Subpart E of Part 68. Certification to 1999/5/EC Radio Equipment & Telecommunications Terminal Equipment Directive (FAX) This Samsung product has been self-certified by Samsung for pan-European single terminal connection to the analogue public switched telephone network (PSTN) in accordance with Directive 1999/5/EC. The product has been designed to work with the national PSTNs and compatible PBXs of the European countries: In the event of problems, you should contact the Euro QA Lab of Samsung Electronics Co., Ltd. in the first instance. The product has been tested against TBR21. To assist in the use and application of terminal equipment which complies with this standard, the European Telecommunication Standards Institute (ETSI) has issued an advisory document (EG 201 121) which contains notes and additional requirements to ensure network compatibility of TBR21 terminals. The product has been designed against, and is fully compliant with, all of the relevant advisory notes contained in this document. You should also know that: • Your machine is not designed to be connected to a digital PBX system. • If you intend to use a computer modem or fax modem on the same phone line as your machine, you may experience transmission and reception problems with all the equipment. It is recommended that no other equipment, except for a regular telephone, share the line with your machine. Replacing the Fitted Plug (for UK Only) • If your area experiences a high incidence of lightning or power surges, we recommend that you install surge protectors for both the power and the telephone lines. Surge protectors can be purchased from your dealer or telephone and electronic specialty stores. IMPORTANT The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp fuse. When you change or examine the fuse, you must re-fit the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do not use the plug until you have another fuse cover. • When programming emergency numbers and/or making test calls to emergency numbers, use a non-emergency number to advise the emergency service dispatcher of your intentions. The dispatcher will give you further instructions on how to actually test the emergency number. Please contact the people from you purchased the machine. The 13 amp plug is the most widely used type in the UK and should be suitable. However, some buildings (mainly old ones) do not have normal 13 amp plug sockets. You need to buy a suitable plug adaptor. Do not remove the moulded plug. • This machine may not be used on coin service or party lines. • This machine provides magnetic coupling to hearing aids. • You may safely connect this equipment to the telephone network by means of a standard modular jack, USOC RJ-11C. WARNING If you cut off the moulded plug, get rid of it straight away. Declaration of Conformity (European Countries) You cannot rewire the plug and you may receive an electric shock if you plug it into a socket. IMPORTANT Approvals and Certifications WARNING : You must earth this machine. The wires in the mains lead have the following color code: The CE marking applied to this product symbolizes Samsung Electronics Co., Ltd. Declaration of Conformity with the following applicable 93/68/EEC Directives of the European Union as of the dates indicated: • Green and Yellow: Earth • Blue: Neutral • Brown: Live January 1, 1995: Council Directive 73/23/EEC Approximation of the laws of the member states related to low voltage equipment. If the wires in the mains lead do not match the colors marked in your plug, do the following: January 1, 1996: Council Directive 89/336/EEC (92/31/EEC), approximation of the laws of the Member States related to electromagnetic compatibility. You must connect the green and yellow wire to the pin marked by the letter “E” or by the safety ‘Earth symbol’ or colored green and yellow or green. March 9, 1999: Council Directive 1999/5/EC on radio equipment and You must connect the blue wire to the pin which is marked with the letter “N” or colored black. telecommunications terminal equipment and the mutual recognition of their conformity. You must connect the brown wire to the pin which is marked with the letter “L” or colored red. A full declaration, defining the relevant Directives and referenced standards can be obtained from your Samsung Electronics Co., Ltd. representative. You must have a 13 amp fuse in the plug, adaptor, or at the distribution board. 7 8 1 Save time and money Introduction • You can print multiple pages on one single sheet of paper to save paper. • You can use preprinted forms and letterhead on plain paper. See the Software Section Thank you for purchasing this Samsung multifunctional product. Your machine provides printing, copying, and scanning functions! • This machine automatically conserves electricity by substantially reducing power consumption when not printing. This chapter includes: • Special features Print in various environments • Understanding component locations • You can print in Windows 98/Me/2000/XP. • Your machine is compatible with various Linux operating system versions. Special features • Your machine is compatible with various Macintosh operating system versions. Your new machine is equipped with special features that improve the print quality. You can: • Your machine comes with the USB interface. Print with excellent quality and speed • You can print up to 600 dpi X 600 dpi. See the Software Section. • Your machine prints A4-sized paper at up to 18 ppma and letter-sized paper at up to 19 ppm. Handle paper flexibly • The manual feeder supports plain paper, letterhead, envelope, label, transparency, custom-sized material, postcard, and heavy paper. • The paper input tray supports 250 sheets of A4/lettersized paper. Create professional documents • Print Watermarks. You can customize your documents with words, such as “Confidential.” See the Software Section. • Print Posters. The text and pictures of each page of your document are magnified and printed across the sheet of paper and taped together to form a poster. See the Software Section. a. page per minute 1.1 Introduction Rear view Understanding component locations These are the main components of your machine: Front view 1 document cover 6 manual feeder guides 2 document glass 7 paper input tray 3 control panel 8 manual feeder 4 front cover 9 output tray 5 toner cartridge 10 1 rear cover 3 power receptacle 2 USB port 4 power switch scan unit 1.2 Introduction Control panel functions SCX-4200 1 Displays the current status and prompts during an operation. 2 Status- Shows the status of your machine. See page 9.3. 3 Menu- Enters Menu mode and scrolls through the available menus. 4 Scroll through the options available in the selected menu. 5 OK- Confirms the selection on the display. 6 Back- Sends you back to the upper menu level. 7 Copies- Allows you to enter the number of copies. 8 Stop/Clear- Stops an operation at any time. In Standby mode, clears/cancels the copy options, such as the resolution, the document type setting, the copy size, and the number of copies. 9 Start- Starts a job. 1.3 Introduction 2 Setting up your machine Getting started This chapter gives you step-by-step instructions for setting up your machine. Finding more information This chapter includes: You can find information for setting up and using your machine from the following resources, either printed or onscreen. Setting up your machine • Selecting a location • Installing the toner cartridge • Loading paper Quick Install Guide Provides information on setting up your machine and, therefore, be sure to follow the instructions in the guide to get the machine ready. Online User’s Guide Provides you with step-by-step instructions for using your machine’s full features, and contains information for maintaining your machine, troubleshooting, and installing accessories. This user’s guide also contains the Software Section providing you with information on how to print documents with your machine on various operating systems, and how to use the supplied software utilities. NOTE: You can access the user’s guides in other languages from the Manual folder on the printer driver CD. Printer Driver Help Provides you with help information on printer driver properties and instructions for setting up the properties for printing. To access a printer driver help screen, click Help from the printer properties dialog box. Samsung website If you have Internet access, you can get help, support, printer drivers, manuals, and order information from the Samsung website, www.samsungprinter.com. • Making connections • Turning the machine on Setting up the machine system • Overview of control panel menus • Changing the display language • Using the save modes Printer software overview • Supplied printer software • Printer driver features • System requirements 2.1 Getting started Selecting a location Installing the toner cartridge Select a level, stable place with adequate space for air circulation. Allow extra space for opening covers and trays. 1 Open the front cover. 2 Remove the toner cartridge from its bag. Do not use a knife or other sharp object as it might scratch the drum of the toner cartridge. 3 Roll the toner cartridge 5 or 6 times to distribute the toner evenly inside the toner cartridge. The area should be well-ventilated and away from direct sunlight or sources of heat, cold, and humidity. Do not set the machine close to the edge of your desk or table. Clearance space • Front: 482.6 mm (enough space so that the paper tray can be removed) • Back: 100 mm (enough space for ventilation) • Right: 100 mm (enough space for ventilation) • Left: 100 mm (enough space for ventilation) Thoroughly rolling the toner cartridge will assure maximum copies per toner cartridge. 4 Remove the paper protecting the toner cartridge. NOTE: If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. 2.2 Getting started Loading paper CAUTION: • To prevent damage, do not expose the toner cartridge to light for more than a few minutes. Cover it with a piece of paper, if left exposed for more than a few minutes. • Do not touch the green underside of the toner cartridge. Use the handle on the toner cartridge to avoid touching this area. 5 Hold the toner cartridge by the handle. Slowly insert the toner cartridge into the opening in the machine. 6 Tabs on the sides of the toner cartridge and corresponding grooves within the machine will guide the toner cartridge into the correct position until it locks into place completely. 7 1 Groove 2 Tab The paper input tray can hold a maximum of 250 sheets of 20 lb (75 g/m2) plain paper. Close the front cover. Make sure that the front cover is securely closed. 1 Pull open the paper input tray and remove it from the machine. 2 Fan the edges of the paper stack to separate the pages. Then tap the stack on a flat surface to even it up. 3 Insert the paper stack into the paper input tray with the side to be printed on facing down. NOTE: If you want to load a different sized paper, you need to adjust the paper guides. For details, see page 2.4. NOTE: When printing text at 5% coverage, you can expect a toner cartridge life of approximately 3,000 pages. (1,000 pages for the toner cartridge that is shipped with the machine.) 2.3 Getting started 4 5 Changing the size of the paper in the paper input tray Pay attention to the paper limit mark on both inside walls of the paper input tray. Paper overloading may cause paper jams. To load longer sizes of paper, such as Legal-sized paper, you need to adjust the paper guides to extend the paper input tray. 1 After pressing and unlatching the guide lock, slide the paper length guide out completely to extend the paper input tray to its full length. 2 After inserting paper into the paper input tray, squeeze the front paper length guide and slide it until it lightly touches the end of the paper stack. Insert and slide the paper input tray back into the machine. NOTE: After you load paper, you need to set up your machine for the paper type and size you loaded. See page 3.6 for copying, or the Software Section for PC-printing. The settings made from the printer driver override the settings on the control panel. For paper smaller than Letter size, adjust the front paper length guide so that it lightly touches the paper stack. 2.4 Getting started 3 Squeeze the paper width guide, as shown and slide it to the stack of paper until it lightly touches the side of the stack. NOTE: When using the USB connection, your machine provides two USB modes; Fast and Slow. Fast is the default mode. Some PC users may experience poor USB function in the default mode. If this occurs, select Slow mode to achieve successful results. For details about changing the USB mode, see page 9.7. Turning the machine on NOTES: • Do not push the paper width guide far enough to cause the materials to warp. • If you do not adjust the paper width guide, it may cause paper jams. 1 Plug one end of the supplied power cord into the power receptacle on the machine and the other end into a properly grounded AC outlet. 2 Press the power switch to turn the machine on. warming up please wait appears on the display indicating that the machine is now on. Making connections 1 Connect a USB cable to the USB connector on your machine. You need to buy a USB 2.0 compliant cable that is not longer than 3 m. To view your display text in another language, see page 2.6. CAUTION: • The fuser area inside of the rear cover of your machine becomes very hot when in use. Take care not to burn your fingers when you access this area. • Do not disassemble the machine with power on. If you do, you may receive an electric shock. To the USB port on your computer 2 Connect the other end of the cable to the USB port on your computer. See your computer User’s Guide if you need help. 2.5 Getting started Setting up the machine system Changing the display language To change the language that appears on the control panel, follow these steps: Overview of control panel menus 1 The control panel provides access to various menus to set up the machine or use the machine’s functions. They can be accessed by pressing Menu. Press Menu until Machine Setup appears on the top line of the display. 2 Press OK when Language appears. Refer to the following diagram. 3 Press the scroll button ( want and press OK. 4 Press Stop/Clear to return to Standby mode. Reduce/Enlarge Darkness or ) to select the language you Using the save modes Original Type Toner save mode Special Copy Off Auto Fit Toner save mode allows your machine to use less toner on each page. Activating this mode extends the life of the toner cartridge beyond what one would experience in the normal mode, but it reduces print quality. ID Card Copy 1 Press Menu until Toner Save appears on the top line of the display. 2 Press the scroll button ( or OK. Clone 2 UP Poster Toner Save Paper Setting ) until On appears and press NOTE: When PC-printing, you can also turn on or off Toner Save mode in the printer properties. See the Software Section. Paper Size Paper Type Power save mode Copy Setup Power save mode allows your machine to reduce power consumption when it is not in actual use. You can turn this mode on and select a length of time for which the machine waits after a job is printed before it switches to a reduced power state. Default-Change Timeout Report Machine Setup Language Power Save USB mode Maintenance Clean Drum 1 Press Menu until Machine Setup appears on the top line of the display. 2 Press the scroll button ( or and press OK. ) until Power Save appears 3 Press the scroll button ( or OK. ) until On appears and press 4 Press the scroll button ( or you want and press OK. ) to select the time setting 5 Press Stop/Clear to return to Standby mode. Clear Settings 2.6 Getting started Printer software overview Printer driver features Your printer drivers support the following standard features: • Paper source selection Supplied printer software • Paper size, orientation and media type You must install the printer software using the supplied printer driver CD after you have set up your machine and connected it to your computer. For details, see the Software Section. • Number of copies The following table lists a general overview of features supported by your printer drivers. The printer driver CD provides you with the following software: Printer Driver Programs for windows Feature Win 98/Me/ 2000/XP Macintosh Linux Toner save Y N Y • Printer driver- Use this driver to take full advantage of your printer’s features. Print quality option Y Y Y • Scanner driver- TWAIN and Windows Image Acquisition (WIA) driver are available for scanning documents on your machine. Poster printing Y N N Multiple pages per sheet (N-up) Y Y Y(2,4) Fit to page printing Y N Y Scale printing Y Y Y Watermark Y N N Overlay Y N N TrueType fonts option Y N N To use your machine as a printer and scanner in Windows, you must install the MFP driver. You can install selectively or all the following components: • Smart Panel- This program allows you to monitor the machine’s status and alerts you when an error occurs during printing. • SmarThru- This is the accompanying Windows-based software for your multifunctional machine. Allows you to edit a scanned image in many ways using a powerful image editor and to send the image by email. You can also open another image editor program installed in your Windows, like Adobe PhotoShop, from SmarThru. For details, please refer to the onscreen help supplied on the SmarThru program. Linux driver You can print and scan in Linux using your machine. For information about installing the MFP driver in Linux, see the Software Section. Macintosh printer driver You can print and scan in Macintosh using your machine. For information about installing the printer driver in Macintosh, see the Software Section. 2.7 Getting started System requirements Before you begin, ensure that your system meets the minimum requirements. Item Requirements Recommended Operating system Windows 98/Me/2000/XP CPU Windows 98/Me/2000 Pentium II 400 MHz or higher Pentium III 933 MHz Windows XP Pentium III 933 MHz or higher Pentium IV 1 GHz Windows 98/Me/2000 64 MB or more 128 MB Windows XP 128 MB or more 256 MB Windows 98/Me/2000 300 MB or more 1 GB Windows XP 1 GB or more 5 GB RAM Free disk space Internet Explorer 5.0 or higher NOTE: For Windows 2000/XP, users who have an administrator right can install the software. 2.8 Getting started 3 Loading original documents and paper 2 Place the document face down on the document glass and align it with the registration guide at the top left corner of the glass. 3 Close the document cover. Be careful not to move the document. This chapter introduces you to how to load documents and print materials into your machine. This chapter includes: • Loading document • Selecting print materials • Loading paper • Setting the paper size and type • Selecting an output location Loading document You can use the document glass to load an original document for copying and scanning. 1 Lift and open the document cover. NOTES: • Leaving the document cover open while copying may affect copy quality and toner consumption. • Dust on the document glass may cause black spots on the printout. Always keep it clean. • If you are copying a page from a book or magazine, lift the document cover until its hinges are caught by the stopper and then close the cover. If the book or magazine is thicker than 30 mm, start copying with the cover open. 3.1 Loading original documents and paper Supported paper types and sizes Selecting print materials Type You can print on a variety of print materials, such as plain paper, envelopes, labels, and transparencies. Always use print materials that meet the guidelines for use with your machine. Paper that does not meet the guidelines outlined in this user’s guide may cause the following problems: Plain paper Size Letter 215.9 x 279 mm (8.5 x 11 inches) Legal 215.9 x 355.6 mm (8.5 x 14 inches) Folio 216 x 330.2 mm (8.5 x 13 inches) A4 210 x 297 mm (8.27 x 11.69 inches) Oficio 216 x 343 mm (8.5 x 13.5 inches) JIS B5 182 x 257 mm (7.18 x 10.12 inches) ISO B5 176 x 250 mm (6.93 x 9.84 inches) Executive 184.2 x 266.7 mm (7.25 x 10.5 inches) A5 148.5 x 210 mm (5.85 x 8.27 inches) A6 105 x 148.5 mm (4.13 x 5.85 inches) Envelope B5 176 x 250 mm (6.92 x 9.48 inches) Envelope Monarch 98.4 x 190.5 mm (3.88 x 7.5 inches) Envelope COM-10 105 x 241 mm (4.12 x 9.5 inches) Envelope DL 110 x 220 mm (4.33 x 8.66 inches) Envelope C5 162 x 229 mm (6.38 x 9.02 inches) • Poor print quality • Increased paper jams • Premature wear on the machine. Properties, such as weight, composition, grain, and moisture content, are important factors that affect the machine’s performance and the output quality. When you choose print materials, consider the following: • Desired outcome: The paper you choose should be appropriate for your project. • Size: You can use any size paper that fits easily within the paper adjusters of the paper input tray. • Weight: Your machine supports paper weights as follows: - 16 to 24 lb (60 to 90 g/m2) bond for the paper input tray - 16 to 43 lb (60 to 165 g/m2) bond for the manual feeder. • Brightness: Some papers are whiter than others and produce sharper, more vibrant images. • Surface smoothness: The smoothness of the paper affects how crisp the printing looks on the paper. NOTES: • Some paper may meet all of the guidelines in this section and still not produce satisfactory results. This may be the result of improper handling, unacceptable temperature and humidity levels, or other variables over which Samsung has no control. • Before purchasing large quantities of paper, ensure that the paper meets the requirements specified in this user’s guide. Envelope CAUTION: Using paper that does not meet these specifications may cause problems, requiring repairs. Such repairs are not covered by the Samsung warranty or service agreements. Dimensions 3.2 Loading original documents and paper Weighta Capacityb • 60 to 90 • 250 g/m2 (16 sheets of to 24 lb 75 g/m2 (20 lb bond) for bond) the paper paper for input tray the paper • 60 to 165 input tray g/m2 (16 to 43 lb • 1 sheet of bond) for paper for the the manual manual feeder feeder 60 to 90 g/m2 (16 to 24 lb) 1 sheet of paper for the manual feeder Type Size Envelope (continued) Envelope C6 Transparency Letter, A4 Labels Card stock Dimensions 114 x 162 mm (4.48 x 6.37 inches) Refer to the Plain paper section Letter, Legal, Folio, A4, JIS B5, ISO B5, Executive, A5, A6 Refer to the Plain paper section Letter, Legal, Folio, A4, JIS B5, ISO B5, Executive, A5, A6 Refer to the Plain paper section Weighta Capacityb 60 to 90 g/m2 (16 to 24 lb) 1 sheet of paper for the manual feeder 138 to 148 g/m2 120 to 150 g/m2 (32 to 40 lb) Guidelines for selecting and storing print materials When selecting or loading paper, envelopes, or other print materials, keep these guidelines in mind: • Always use paper and other materials that conform with the specifications listed on page 3.2. 1 sheet of paper for the manual feeder • Attempting to print on damp, curled, wrinkled, or torn paper can cause paper jams and poor print quality. • For the best print quality, use only high quality copier grade paper specifically recommended for use in laser printers. 1 sheet of paper for the manual feeder • Avoid using the following paper types: - Paper with embossed lettering, perforations, or a texture that is too smooth or too rough - Erasable bond paper Minimum size (custom) 76 x 127 mm (3.0 x 5.0 inches) Maximum size (custom) 215.9 x 356 mm (8.5 x 14 inches) 60 to 165 g/m2 (16 to 43 lb) 60 to 165 g/m2 (16 to 43 lb bond) - Multi-paged paper 1 sheet of paper for the manual feeder - Synthetic paper and thermally reactive paper - Carbonless paper and Tracing paper. • Use of these types of paper could result in paper jams, chemical smells, and damage to your machine. • Store paper in its ream wrapper until you are ready to use it. Place cartons on pallets or shelves, not on the floor. Do not place heavy objects on top of the paper, whether it is packaged or unpackaged. Keep it away from moisture or other conditions that can cause it to wrinkle or curl. 1 sheet of paper for the manual feeder • Store unused materials at temperatures between 15o C and 30o C (59o F to 86o F). The relative humidity should be between 10% and 70%. a If paper weight is over 90 g/m2, load one sheet of paper in the manual feeder. b Maximum capacity may differ depending on media weight, thickness, and environmental conditions. • Store unused paper in a moisture-proof wrap, such as a plastic container or bag, to prevent dust and moisture from contaminating your paper. Paper size supported in each mode Mode Size • Load special paper types one sheet at a time through the manual feeder to avoid paper jams. Source Copy mode Letter, A4, Legal, Folio, Executive, ISO B5, JIS B5, A5, A6 • paper input tray • manual feeder Single side printing All sizes supported by the machine • paper input tray • manual feeder • To prevent materials such as transparencies and label sheets from sticking together, remove them as they print out. 3.3 Loading original documents and paper Guidelines for special materials Paper Type Envelopes Paper Type Guidelines • Successful printing on envelopes depends upon the quality of the envelopes. When selecting envelopes, consider the following factors: - Weight: The weight of the envelope paper should not exceed 90 g/m2 (24 lb) or jamming may occur. - Construction: Prior to printing, envelopes should lie flat with less than 6 mm (0.25 inches) curl, and should not contain air. - Condition: Envelopes should not be wrinkled, nicked, or otherwise damaged. - Temperature: You should use envelopes that are compatible with the heat and pressure of the machine during operation. • Use only well-constructed envelopes with sharp and well creased folds. • Do not use stamped envelopes. • Do not use envelopes with clasps, snaps, windows, coated lining, self-adhesive seals, or other synthetic materials. • Do not use damaged or poorly made envelopes. • Be sure the seam at both ends of the envelope extends all the way to the corner of the envelope. Transparencies • To avoid damaging the machine, use only transparencies designed for use in laser printers. • Transparencies used in the machine must be able to withstand 208° C (406.4° F), the machine’s fusing temperature. • Place them on a flat surface after removing them from the machine. • Do not leave them in the paper tray for long periods of time. Dust and dirt may accumulate on them, resulting in spotty printing. • To avoid smudging caused by fingerprints, handle them carefully. • To avoid fading, do not expose printed transparencies to prolonged sunlight. • Ensure that transparencies are not wrinkled, curled, or have any torn edges. Labels • To avoid damaging the machine, use only labels designed for use in laser printers. • When selecting labels, consider the following factors: - Adhesives: The adhesive material should be stable at 208° C (406.4° F), the machine’s fusing temperature. - Arrangement: Only use labels with no exposed backing between them. Labels can peel off sheets that have spaces between the labels, causing serious jams. - Curl: Prior to printing, labels must lie flat with no more than 13 mm (5 inches) of curl in any direction. - Condition: Do not use labels with wrinkles, bubbles, or other indications of separation. • Make sure that there is no exposed adhesive material between labels. Exposed areas can cause labels to peel off during printing, which can cause paper jams. Exposed adhesive can also cause damage to machine components. • Do not run a sheet of labels through the machine more than once. The adhesive backing is designed for only a single pass through the machine. • Do not use labels that are separating from the backing sheet or are wrinkled, bubbled, or otherwise damaged. Card stock or custom-sized materials • Do not print on media smaller than 76 mm (3 inches) wide or 127 mm (5 inches) long. • In the software application, set margins at least 6.4 mm (0.25 inches) away from the edges of the material. Acceptable Unacceptable • Envelopes with a peel-off adhesive strip or with more than one flap that folds over to seal must use adhesives compatible with the machine’s fusing temperature of 208° C (406.4° F) for 0.1 second. The extra flaps and strips might cause wrinkling, creasing, or jams, and may even damage the fuser. • For the best print quality, position margins no closer than 15 mm (0.6 inches) from the edges of the envelope. • Avoid printing over the area where the envelope’s seams meet. Guidelines 3.4 Loading original documents and paper Paper Type Preprinted paper In the manual feeder Guidelines Use the manual feeder to print transparencies, labels, envelopes or postcards in addition to making quick runs of paper types or sizes that are not currently loaded in the paper input tray. • Letterhead must be printed with heat-resistant ink that will not melt, vaporize, or release hazardous emissions when subjected to the machine’s fusing temperature of 208° C (406.4° F) for 0.1 second. • Letterhead ink must be non-flammable and should not adversely affect printer rollers. • Forms and letterhead should be sealed in a moisture-proof wrapping to prevent changes during storage. • Before you load preprinted paper, such as forms and letterhead, verify that the ink on the paper is dry. During the fusing process, wet ink can come off preprinted paper, reducing print quality. To load print material in the manual feeder: 1 Load a sheet of the print material with the side to be printed on facing up into the center of the manual feeder. Loading paper In the paper input tray Load the print material you use for the majority of your print jobs in the paper input tray. The paper input tray can hold a maximum of 250 sheets of 20 lb (75 g/m2) plain paper. To load paper, pull open the paper input tray and load paper with the side to be printed on face down. Depending on the paper type you are using, keep the following loading method: • Envelopes: load a sheet with the flap side down and with the stamp area on the top left side. • Transparencies: load a sheet with the print side up and the top with the adhesive strip entering the machine first. • Labels: load a sheet with the print size up and top short edge entering the machine first. • Preprinted paper: load a sheet with the design face up, top edge toward the machine. You can load letterhead paper with the design side face down. The top edge of the sheet with the logo should be placed at the front of the paper input tray. • Card: load a sheet with the print side up and the short edge entering the machine first. For details about loading paper in the tray, see page 2.3. • Pre printed paper: load a sheet with the printed side down and an uncurled edge toward the machine. NOTES: • If you experience problems with paper feed, place one sheet at a time in the manual feeder. • You can load previously printed paper. The printed side should be facing up with an uncurled edge at the front. If you experience problems with paper feed, turn the paper around. Note that the print quality is not guaranteed. 3.5 Loading original documents and paper 2 Adjust the manual feeder guides to the width of the print material without bending it. 4 Press the scroll button ( or are using and press OK. ) to find the paper size you 5 Press Back to return to the upper level. 6 Press the scroll button ( press OK. or ) to select Paper Type and 7 Press the scroll button ( or are using and press OK. ) to find the paper type you 8 Press Stop/Clear to return to Standby mode. Selecting an output location 3 The machine has two output locations: the rear cover (face up) and the output tray (face down). After loading paper, you need to set the paper type and size for the manual feeder. See page 3.6 for copying or the Software Section for PC-printing. To use the output tray, make sure that the rear cover is closed. To use the rear cover, open the rear cover. NOTE: The settings made from the printer driver override the settings on the control panel. 4 NOTES: • If paper coming out of the output tray has problems, such as excessive curl, try printing to the rear cover. • To avoid paper jams, do not open or close the rear cover while the machine is printing. If you want to use the rear cover, open the rear cover. Tips on using the manual feeder • Print materials should be loaded face up with the top edge going into the manual feeder first and be placed in the center of the tray. Printing to the output tray • Always load only the print materials specified in the Specifications on page 3.2 to avoid paper jams and print quality problems. If you use paper which is not long enough to reach the output tray, use the scan unit. • When you print on 76 x 127 mm (3 x 5 inches) sized media on the manual feeder, open the rear cover to use the rear cover. To use the scan unit: • Make sure to open the rear cover when you print on transparencies. If not, they may tear while exiting the machine. 1 Lift the scan unit. A tab automatically springs up to support the cover. Setting the paper size and type After loading paper in the paper tray, you need to set the paper size and type using the control panel buttons. These settings will apply to Copy mode. For PC-printing, you need to select the paper size and type in the application program you use on your PC. 1 Press Menu until Paper Setting appears on the top line of the display. 2 Press OK when Paper Size appears. 3 Press the scroll button ( or ) to select the paper tray you want to use and press OK. (Face down) The output tray collects printed paper face down, in the order in which the sheets were printed. The tray should be used for most print jobs. 3.6 Loading original documents and paper 2 Take the paper out manually. To use the rear cover, open the rear cover by pulling it up. 3 Close the scan unit. In order to close the cover, push the tab to the left and hold it down. Then lower the cover carefully until the cover is holding down the tab. Then you can move your hand and finish lowering the cover. CAUTION: The fuser area inside the rear cover of your machine becomes very hot when in use. Take care when you access this area. Be careful not to pinch your fingers! NOTES: • If you continuously print many pages, the surface of the output tray may become hot. Be careful not to touch the surface, and especially keep children away from the surface. • The output tray can hold up to 50 sheets of paper. Remove the pages so that tray is not overloaded. Printing to the rear cover (Face up) Using the rear cover, paper comes out of the machine face up. Printing from the manual feeder to the rear cover provides a straight paper path. Using the rear cover might improve the output quality with special materials. 3.7 Loading original documents and paper 4 Reduced/Enlarged copy Copying You can reduce or enlarge the size of a copied image from 50% to 200% when you copy original documents from the document glass. This chapter gives you step-by-step instructions for copying documents. To select from the predefined copy sizes: This chapter includes: • Copying • Changing the settings for each copy • Using special copy features 1 Press Menu then Reduce/Enlarge appears. 2 Press the scroll button ( or you want and press OK. ) to select the size setting To fine-tune the size of copies: • Changing the default settings • Setting the time out option Copying 1 Place a document on the document glass. 2 Customize the copy settings including copy size, darkness, and original type, by using the control panel buttons. See page 4.1. 1 Press Menu then Reduce/Enlarge appears. 2 Press the scroll button ( appears and press OK. 3 Press the scroll button ( or ) to enter the copy size you want. Pressing and holding the button allows you to quickly scroll to the number you want. 4 Press OK to save the selection. or ) until Custom:50-200% NOTE: When you make a reduced copy, black lines may appear at the bottom of your copy. If necessary, you can use special copy features, such as Poster copying or 2 Up copying. See page 4.3. Darkness 3 Press Copies and enter the number of copies using the scroll button ( or ), if necessary. 4 Press Start to begin copying. If you have an original document containing faint markings and dark images, you can adjust the brightness to make a copy that is easier to read. The display shows the copy processing. 1 Press Menu until Darkness appears on the top line of the display. 2 Press the scroll button ( or you want. NOTE: You can cancel the copy job during an operation. Press Stop/Clear, and the copying will stop. ) to select the contrast mode • Light: works well with dark print. • Normal: works well with standard typed or printed documents. Changing the settings for each copy • Dark: works well with light print or faint pencil markings. 3 The buttons on the control panel let you select all basic copy options: darkness, document type and copy size. Set the following options for the current copy job before pressing Start to make copies. Press OK to save the selection. Original type The original type setting is used to improve the copy quality by selecting the document type for the current copy job. NOTE: If you press Stop/Clear while setting the copy options, all of the options you have set for the current copy job will be canceled and returned to their default status. 1 Press Menu until Original Type appears on the top line of the display. 2 Press the scroll button ( you want. or ) to select the image mode • Text: Use for documents containing mostly text. • Text/Photo: Use for documents with mixed text and photographs. • Photo: Use when the originals are photographs. 4.1 Copying 3 Auto Fit copying Press OK to save the selection. A Changing the default settings This feature automatically reduces or enlarges the original image to fit on the paper currently loaded in the machine. NOTE: When the size of the document you want to copy is not same as the size of the paper loaded, this function automatically adjusts the size of the document to fit the paper. You can not adjust the copy size manually. The copy options, including darkness, original type, copy size and number of copies, can be set to the most frequently used modes. When you copy a document, the default settings are used unless they are changed by using the menus on the control panel. 1 Load the document to be copied on the document glass, and close the cover. 2 Press Menu until Special Copy appears on the top line of the display. 3 Press the scroll button ( or press OK. 4 Customize the copy settings including copy size, darkness, and original type, by using the control panel buttons. See page 4.1. To create your own default settings: 1 Press Menu until Copy Setup appears on the top line of the display. 2 Press OK when Default-Change appears. 3 Press the scroll button ( and press OK. 4 Press the scroll button ( or ) to change the setting or enter the value and press OK. 5 Repeat steps 3 through 4, as needed. 6 Press Stop/Clear to return to Standby mode. or ) to select a setup option NOTE: You cannot adjust the copy size using the Reduce/ Enlarge menu while Auto Fit copying is enabled. 5 NOTE: While you are setting copy options, pressing Stop/ Clear cancels the changed settings and restores their default status. Press Start to begin copying. ID Card copying You can copy both sides of the ID Card like a drivers licence to a single side of paper. When you copy using this feature, the machine prints one side of the card on the upper half of the paper and the other side on the lower half without reducing the size of the original. Using special copy features If the loaded card is larger than the printable area, some portions may not be printed. Clone copying This feature prints multiple image copies from the original document on a single page. The number of images is automatically determined by the original image and paper size. 1 Place the document to be copied on the document glass, and close the cover. 2 Press Menu until Special Copy appears on the top line of the display. 3 Press the scroll button ( press OK. 4 Customize the copy settings including copy size, darkness, and original type, by using the control panel buttons. See page 4.1. or 1 Place the ID Card to be copied on the document glass and close the cover. 2 Press Menu until Special Copy appears on the top line of the display. 3 Press the scroll button ( appears and press OK. 4 Customize the copy settings including copy size, darkness, and original type, by using the control panel buttons. See page 4.1. 5 Press Start to begin copying. ) until Clone appears and or ) until ID Card copy Your machine begins scanning the front side and will then display Set Backside. 6 NOTE: You cannot adjust the copy size using the Reduce/ Enlarge menu while making a clone copy. 5 ) until Auto Fit appears and Press Start to begin copying. 4.2 Copying Open the document cover and flip the document over. Close the cover. NOTE: If you press Stop/Clear or no buttons are pressed for approximately 30 seconds, the machine cancels the copy job and returns to Standby mode. 7 NOTE: You cannot adjust the copy size using the Reduce/ Enlarge menu while making a poster. Your original document is divided into 9 portions. Each portion is scanned and printed one by one in the following order: Press Start to begin copying. 2-UP copying 2 1 Place the document to be copied on the document glass and close the cover. 1 This feature prints 2 original images reduced to fit onto one sheet of paper. 2 Press Menu until Special Copy appears on the top line of the display. 3 Press the scroll button ( press OK. 4 Customize the copy settings including copy size, darkness, and original type, by using the control panel buttons. See page 4.1. or Setting the time out option You can set the time the machine waits before it restores the default copy settings, if you do not start copying after changing them on the control panel. ) until 2-UP appears and NOTE: You cannot adjust the copying size using the Reduce/ Enlarge menu while making a 2-UP copying. 5 1 Press Menu until Copy Setup appears on the top line of the display. 2 Press the scroll button ( or press OK. 3 Press the scroll button ( you want. Your machine begins scanning the front side and will then display Set Next Page Press Start. Place the second document to be copied on the document glass. 7 Press Start to begin copying. NOTE: 2-UP copying reduces your original document by 50%. Poster copying This feature prints an image onto 9 sheets of paper (3x3). You can paste the printed pages together to make one poster-sized document. 1 Place the document to be copied on the document glass and close the cover. 2 Press Menu until Special Copy appears on the top line of the display. 3 Press the scroll button ( press OK. 4 Customize the copy settings including copy size, darkness, and original type, by using the control panel buttons. See page 4.1. 5 Press Start to begin copying. or ) to select the time setting Selecting Off means that the machine does not restore the default settings until you press Start to begin copying, or Stop/Clear to cancel. Press Start to begin copying. 6 or ) until Timeout appears and ) until Poster appears and 4.3 Copying 4 Press OK to save your selection. 5 press Stop/Clear to return to Standby mode. 5 Basic printing This chapter explains common printing tasks. Printing a document This printer allows you to print from various Windows applications, a Macintosh computer, or a Linux system. The exact steps for printing a document may vary depending on the application you use. For details about printing, see the Software Section. Canceling a print job If the print job is waiting in a print queue or print spooler, such as the printer group in Windows, delete the job as follows: 1 Click the Windows Start button. 2 For Windows 98/2000/Me, select Settings and then Printers. For Windows XP, select Printers and Faxes. 3 Double-click the Samsung SCX-4200 Series icon. 4 From the Document menu, select Cancel Printing (Windows 98/Me) or Cancel (Windows 2000/XP). NOTE: You can also access this window by simply doubleclicking the printer icon at the bottom right corner of the Windows desktop. You can also cancel the current job by pressing Stop/Clear on the control panel of your machine. 5.1 Basic printing 6 Scanning Scanning with your machine lets you turn pictures and text into digital files on your computer. Then you can upload them on your web site or use them to create projects that you can print using Samsung SmarThru program or the WIA driver. Scanning basics Your machine offers the following ways to scan an image: • From TWAIN-compliant software: You can use other software including Adobe Photoshop Deluxe and Adobe Photoshop. • From the Windows Images Acquisition (WIA) driver: Your machine supports the WIA driver for scanning images. • From the Samsung SmarThru software: Launch Samsung SmarThru and open Scan To to begin scanning. NOTE: To scan with your machine, you must install the software. For details about installing the software, see the Software Section. 6.1 Scanning 7 Ordering toner cartridge This chapter provides information on purchasing toner cartridges available for your machine. Toner cartridges When the toner runs out, you can order the following type of toner cartridges for your machine: Yielda Type Standard 3,000 pages Part number SCX-D4200A a. ISO 19752 5% coverage How to purchase To order Samsung-authorized toner cartridges, contact your local Samsung dealer or the retailer where you purchased your machine, or visit www.samsungprinter.com and select your country/region for information on calling for technical support. 7.1 Ordering toner cartridge 8 Maintenance Cleaning your machine This chapter provides information for maintaining your machine and the toner cartridge. To maintain print and scan quality, follow the cleaning procedures below each time the toner cartridge is replaced or if print and scan quality problems occur. This chapter includes: CAUTION: Cleaning the cabinet of the machine with cleaning materials containing large amounts of alcohol, solvent, or other strong substances can discolor or crack the cabinet. • Printing reports • Clearing memory • Cleaning your machine • Maintaining the toner cartridge Cleaning the outside • Consumable and replacement parts Clean the cabinet of the machine with a soft lint-free cloth. You can dampen the cloth slightly with water, but be careful not to let any water drip onto or into the machine. Printing reports Cleaning the inside Your machine can print report containing system data information. 1 Press Menu until Report appears on the top line of the display. During the printing process, paper, toner, and dust particles can accumulate inside the machine. This buildup can cause print quality problems, such as toner specks or smearing. Cleaning the inside of the machine clears or reduces these problems. 2 Press OK when System Data appears. 1 Turn the machine off and unplug the power cord. Wait for the machine to cool down. 2 Open the front cover and pull the toner cartridge out. Set it on a clean flat surface. The system data information will be printed. Clearing memory You can selectively clear information stored in your machine’s memory. 1 Press Menu until Maintenance appears on the top line of the display. 2 Press the scroll button ( appears and press OK. 3 Press the scroll button ( or to clear. or ) until Clear Settings ) to select the item you want • Paper Setting: Resets all of the Paper Setting options to the factory default. CAUTION: • To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes. Cover it with a piece of paper, if necessary. • Do not touch the green surface underside of the toner cartridge. Use the handle on the toner cartridge to avoid touching this area. • Copy Setup: Resets all of the Copy Setup options to the factory default. • All Settings: Resets all of your settings to the factory default. • Machine Setup: Resets all of the system settings, such as the display language and save mode, to the factory default. 4 Press OK to confirm clearing. The selected setting is cleared. 5 Repeat steps 3 through 4 to clear another setting. 6 Press Stop/Clear to return to Standby mode. 8.1 Maintenance 3 With a dry lint-free cloth, wipe away any dust and spilled toner from the toner cartridge area and the toner cartridge cavity. The machine prints out a cleaning page. Toner particles on the drum surface are affixed to the paper. 4 If the problem remains, repeat steps 1 through 3. Cleaning the scan unit Keeping the scan unit clean helps ensure the best possible copies. We suggest that you clean the scan unit at the start of each day and during the day, as needed. 1 Slightly dampen a soft lint-free cloth or paper towel with water. 2 Open the document cover. 3 Wipe the surface of the document glass until it is clean and dry. CAUTION: While cleaning the inside of the machine, be careful not to touch the transfer roller, located underneath the toner cartridge. Oil from your fingers can cause print scan quality problems. 4 Locate the long strip of glass (LSU) inside the top of the toner cartridge compartment, and gently swab the glass to see if dirt turns the white cotton black. 5 Reinsert the toner cartridge and close the front cover. 6 Plug in the power cord and turn the machine on. Cleaning the drum If there are streaks or spots on your print, the OPC drum of the toner cartridge may require cleaning. 1 Before starting the cleaning procedure, make sure that paper is loaded in the machine. 2 Press Menu until Maintenance appears on the top line of the display. 3 Press OK when Clean Drum appears. 8.2 Maintenance 1 document cover 2 document glass 4 Wipe the underside of the document cover until it is clean and dry. 5 Close the document cover. 2 Pull the toner cartridge out. 3 Thoroughly roll the toner cartridge 5 or 6 times to distribute the toner evenly inside the toner cartridge. Maintaining the toner cartridge Toner cartridge storage To get the most from the toner cartridge, keep the following guidelines in mind: • Do not remove the toner cartridge from its package until ready for use. • Do not refill the toner cartridge. The machine warranty does not cover damage caused by using a refilled toner cartridge. • Store toner cartridges in the same environment as your machine. • To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes. Saving toner To save toner, press Menu until Toner Save appears and then press OK when On appears. Using this feature extends the life of the toner cartridge and reduces your cost per page, but it also reduces print quality. Expected toner cartridge life The life of the toner cartridge depends on the amount of toner that print jobs require. When printing text at ISO 19752 5% coverage, a new toner cartridge lasts an average of 3,000 pages. (The original toner cartridge supplied with the machine lasts an average of 1,000 pages.) The actual number may be different depending on the print density of the page you print. If you print a lot of graphics, you may need to change the toner cartridge more often. NOTE: If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. CAUTION: Do not touch the green underside of the toner cartridge. Use the handle on the toner cartridge to avoid touching this area. NOTE: The 1,000 pages and 3,000 pages toner cartridge have different shapes. Redistributing the toner cartridge 4 Hold the toner cartridge by the handle and slowly insert the toner cartridge into the opening in the machine. 5 Tabs on the sides of the toner cartridge and corresponding grooves within the machine will guide the toner cartridge into the correct position until it locks into place completely. 6 Close the front cover. Make sure that the cover is securely closed. When the toner cartridge is near the end of its life: • White streaks or light printing occurs. • The warning message, Toner Low displays on the control panel. • The Smart Panel program window appears on the computer telling you that the toner cartridge is low on toner. • The Status LED blinks red. If this happens, you can temporarily reestablish print quality by redistributing the remaining toner in the toner cartridge. In some cases, white streaks or light printing will still occur even after you have redistributed the toner. 1 Open the front cover. 8.3 Maintenance Replacing the toner cartridge NOTE: If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. When the toner cartridge is completely empty: • The warning message, Toner Empty or [Toner Empty] Replace Toner displays on the control panel. • The Smart Panel program window appears on the computer telling you that the toner cartridge is empty. CAUTION: Do not touch the green underside of the toner cartridge. Use the handle on the toner cartridge to avoid touching this area. • The Status LED lights red. At this stage, the toner cartridge needs to be replaced. For order information for toner cartridges, see page 7.1. 11 Hold the toner cartridge by the handle and slowly insert the toner cartridge into the opening in the machine. NOTE: This feature does not work for the [Toner Empty] Replace Toner message. 7 12 Tabs on the sides of the toner cartridge and corresponding grooves within the machine will guide the toner cartridge into the correct position until it locks into place completely. Pull the toner cartridge out. 13 Close the front cover. Make sure that the cover is securely closed. Consumable and replacement parts From time to time, you needs to replace the toner cartridge, roller, and fuser unit to maintain top performance and to avoid print quality problems and paper feed problems resulting from worn parts. The Smart Panel program window will appear on the computer, indicating which item needs to be replaced. 8 Remove the new toner cartridge from its bag. 9 Roll the toner cartridge 5 or 6 items to distribute the toner evenly inside the toner cartridge. The following items should be replaced after you have printed the specified number of pages, or when the life span of each item has expired. The Smart Panel program window will appear on the computer, indicating which item needs to be replaced. Items Yield (Average) Transfer roller Approx. 50,000 pages Fuser unit Approx. 50,000 pages Paper feeding roller Approx. 50,000 pages To purchase consumable and replacement parts, contact your Samsung dealer or the retailer where you bought your machine. We strongly recommend that these items be installed by a trained service professional, except for the toner cartridge (see page 8.4). Thoroughly rolling the toner cartridge will assure maximum copies per toner cartridge. 10 Remove the paper protecting the toner cartridge. 8.4 Maintenance 9 3 Troubleshooting Remove the jammed paper by gently pulling it straight out. This chapter gives helpful information for what to do if you encounter an error. This chapter includes: • Clearing paper jams • Understanding the Status LED • Understanding display messages • Solving other problems Clearing paper jams If there is any resistance and the paper does not move when you pull, or if you cannot see the paper in this area, check the fuser area around the toner cartridge. See page 9.2. When a paper jam occurs, Paper Jam appears on the display. Refer to the table below to locate and clear the paper jam. Message Location of Jam Go to [Paper Jam 0] Open/Close Door In the paper input tray [Paper Jam 1] Open/Close Door In the fuser area or around the toner cartridge In the manual feeder page 9.2 [Paper Jam 2] Check Inside In the paper exit area page 9.2 below and page 9.1 4 Insert the paper input tray into the machine until it snaps into place. 5 Open and close the front cover to resume printing. In the manual feeder 1 If the paper is not feeding properly, pull the paper out of the machine. 2 To resume printing, open and close the front cover. To avoid tearing the paper, pull out the jammed paper gently and slowly. Follow the instructions in the following sections to clear the jam. In the paper input tray 1 Open and close the front cover. The jammed paper automatically exits the machine. If the paper does not exit, continue to step 2. 2 Pull the paper input tray out. 9.1 Troubleshooting In the fuser area or around the toner cartridge In the paper exit area 1 NOTE: The fuser area is hot. Take care when removing paper from the machine. If the paper does not exit, continue to step 2. 2 1 Open and close the front cover. The jammed paper automatically exits the machine. Gently pull the paper out of the output tray. Skip to step 9. Open the front cover and pull the toner cartridge out. If you cannot see the jammed paper in the output tray, continue to the next step. 2 Remove the jammed paper by gently pulling it straight out. 3 Lift the scan unit. 4 Pull the jammed paper out gently. 5 Close the scan unit by pushing a tab to the left and hold it down and lowering the cover carefully until the cover is holding down the tab. If there is any resistance and the paper does not move when you pull or if you cannot see the paper under the scan unit, continue to the next step. 3 6 Open the rear cover. 7 Remove the jammed paper by gently pulling it straight out. 8 Close the rear cover. 9 Open and close the front cover to resume printing. Replace the toner cartridge and close the front cover. Printing automatically resumes. 9.2 Troubleshooting Tips for avoiding paper jams Understanding the Status LED By selecting the correct paper types, most paper jams can be avoided. When a paper jam occurs, follow the steps outlined in page 9.1. The Status LED on the control panel shows the status of your machine. See the table below to know your machine’s status. • Follow the procedures in page 2.3. Ensure that the adjustable guides are positioned correctly. Status • Do not overload the paper input tray. Ensure that the paper is below the paper capacity mark on the inside wall of the paper input tray. Off • The machine is off-line. • The machine is in Power Save mode. When data is received, or any button is pressed, it switches to on-line automatically. • Do not remove paper from the paper input tray while your machine is printing. • Flex, fan, and straighten the paper before loading. Green • Do not use creased, damp, or highly curled paper. • Do not mix paper types in the paper input tray. On The machine is on-line and can be used. Blinking • When the backlight slowly blinks, the machine is receiving data from the computer. • When the backlight normally blinks, the machine is scanning the loaded document. • When the backlight fast blinks, the machine is printing data. On • The toner cartridge is totally exhausted. Remove the old toner cartridge and install a new one. See page 8.4. • A paper jam has occurred. To solve the problem, see page 9.1. • The front cover is open. Close the front cover. • There is no paper in the paper input tray. Load paper in the paper input tray. • The machine has stopped due to a major error. Check the display message. See page 9.4 for details on the meaning of the error message. Blinking • A minor error occurs and the machine is waiting an error to be cleared. Check the display message. When the problem is cleared, the machine resumes. • The toner cartridge is low. Order a new toner cartridge. You can temporarily improve print quality by redistributing the toner. See page 8.4. • Use only recommended print materials. See page 3.2. • Ensure that the recommended print side of print materials is facing down in the paper input tray and facing up in the manual feeder. Red 9.3 Troubleshooting Description Display Understanding display messages Messages appear on the Smart Panel program window or the control panel display to indicate the machine’s status or errors. Refer to the tables below to understand the messages’ meaning and correct the problem if necessary. Messages and their meanings are listed in alphabetical order. NOTE: When you call for service, it is very convenient to tell the service representative the display message. Display Meaning Meaning Suggested solutions [Paper Jam 0] Open/Close Door Paper has jammed in the feeding area of the paper input tray. Clear the jam. See page 9.1. [Paper Jam 1] Open/Close Door Paper has jammed in the fuser area or in the manual feeder. Clear the jam. See page 9.2. [Paper Jam 2] Check Inside Paper has jammed in the paper exit area. Clear the jam. See page 9.2. Power Failure Power has turned off then on and the machine’s memory has not been back up. The job which you were trying to do before the power failure must be completely re-done. Suggested solutions Door Open The front cover or rear cover is not securely latched. Close the cover until it locks into place. Hsync Error A problem has occurred in the LSU (Laser Scanning Unit). Unplug the power cord and plug it back in. If the problem persists, please call for service. Scanner Error There is a problem in the scanner unit. Unplug the power cord and plug it back in. If the problem persists, please call for service. Invalid Cartridge You have used an unauthorized cartridge. You must use a Samsung approved cartridge. Toner Empty The toner cartridge has run out. Replace the toner cartridge with a new one. See page 8.4. No Cartridge • You have used an unauthorized cartridge. • The toner cartridge you have installled is not for your machine. • You must use a Samsung approved cartridge. [Toner Empty] Replace Toner The toner cartridge has run out. The printer stops printing. Replace the toner cartridge with a new one. See page 8.4. Toner Low The toner is almost empty. Take out the toner cartridge and gently shake it. By doing this, you can temporarily reestablish printing operations. [Jam 1] or [No Cartridge] The toner cartridge is not installed. Install the toner cartridge. See page 2.2. Low Heat Error There is a problem in the fuser unit. Unplug the power cord and plug it back in. If the problem persists, please call for service. [LSU Error] A problem has occurred in the LSU (Laser Scanning Unit). Unplug the power cord and plug it back in. If the problem persists, please call for service. [No Paper] The paper in the paper input tray has run out. Load paper in the paper input tray. See page 2.3. Open Heat Error There is a problem in the fuser unit. Unplug the power cord and plug it back in. If the problem persists, please call for service. [Over Heat] There is a problem in the fuser unit. Unplug the power cord and plug it back in. If the problem persists, please call for service. Add Paper • Install a Samsung genuine toner cartridge, designed for your machine. Solving other problems The following chart lists some conditions that may occur and the recommended solutions. Follow the suggested solutions until the problem is corrected. If the problem persists, please call for service. Paper feeding problems Condition Paper is jammed during printing. 9.4 Troubleshooting Suggested solutions Clear the paper jam. See page 9.1. Condition Paper sticks together. Printing problems Suggested solutions • Ensure that there is not too much paper in the paper input tray. The paper input tray can hold up to 250 sheets of paper, depending on the thickness of your paper. • Make sure that you are using the correct type of paper. See page 3.2. • Remove paper from the paper input tray and flex or fan the paper. • Humid conditions may cause some paper to stick together. Multiple sheets of paper do not feed. • Different types of paper may be stacked in the paper input tray. Load paper of only one type, size, and weight. • If multiple sheets have caused a paper jam, clear the paper jam. See page 9.1. Paper does not feed into the machine. • Remove any obstructions inside the machine. • Paper has not been loaded correctly. Remove paper from the paper input tray and reload it correctly. • There is too much paper in the paper input tray. Remove excess paper from the paper input tray. • The paper is too thick. Use only paper that meets the specifications required by the machine. See page 3.2. The paper keeps jamming. Condition Possible cause The machine does not print. The machine is not receiving power. Check the power cord connections. Check the power switch and the power source. The machine is not selected as the default printer. Select Samsung SCX-4200 Series as your default printer in your Windows. Check the machine for the following: • The front cover is not closed. - Close the front cover. • Paper is jammed. - Clear the paper jam. See page 9.1. • No paper is loaded. - Load paper. See page 2.3. • The toner cartridge is not installed. - Install the toner cartridge. See page 2.2. If a printer system error occurs, contact your service representative. • There is too much paper in the paper input tray. Remove excess paper from the tray. If you are printing on special materials, use the manual feeder. • An incorrect type of paper is being used. Use only paper that meets the specifications required by the machine. See page 3.2. • There may be debris inside the machine. Open the front cover and remove the debris. Transparencies stick together in the paper exit. Use only transparencies specifically designed for laser printers. Remove each transparency as it exits from the machine. Envelopes skew or fail to feed correctly. Ensure that the paper guides are against both sides of the envelopes. Suggested solutions 9.5 Troubleshooting The connection cable between the computer and the machine is not connected properly. Disconnect the printer cable and reconnect it. The connection cable between the computer and the machine is defective. If possible, attach the cable to another computer that is working properly and print a job. You can also try using a different printer cable. The port setting is incorrect. Check the Windows printer setting to make sure that the print job is sent to the correct port, for example, LPT1. If the computer has more than one port, make sure that the machine is attached to the correct one. The machine may be configured incorrectly. Check the printer properties to ensure that all of the print settings are correct. The printer driver may be incorrectly installed. Repair the printer software. See the Software Section. The machine is malfunctioning. Check the display message on the control panel to see if the machine is indicating a system error. Condition Possible cause Suggested solutions The machine selects print materials from the wrong paper source. The paper source selection in the printer properties may be incorrect. For many software applications, the paper source selection is found under the Paper tab within the printer properties. Select the correct paper source. See the Software Section. A print job is extremely slow. The job may be very complex. Reduce the complexity of the page or try adjusting the print quality settings. The maximum print speed of your machine is 19 PPM for Letter-sized paper and 18 PPM for A4-sized paper. If you are using Windows 98/Me, the Spooling Setting may be set incorrectly. From the Start menu, choose Settings and Printers. Right-click the Samsung SCX-4200 Series machine icon, choose Properties, click the Details tab, and then choose the Spool Settings button. Select the desired spool setting. The page orientation setting may be incorrect. Change the page orientation in your application. See the Software Section. The paper size and the paper size settings do not match. Ensure that the paper size in the printer driver settings matches the paper in the paper input tray. Half the page is blank. The machine prints, but the text is wrong, garbled, or incomplete. Condition Possible cause Pages print, but are blank. The toner cartridge is defective or out of toner. Redistribute the toner, if necessary. See page 8.3. If necessary, replace the toner cartridge. The file may have blank pages. Check the file to ensure that it does not contain blank pages. Some parts, such as the controller or the board, may be defective. Contact a service representative. The illustrations print incorrectly in Adobe Illustrator. The setting in the software application is wrong. Select Download as Bit Image in the TrueType Options window of the Graphic properties and print the document again. An error occurs repeatedly when you are printing with the USB connection. When the USB mode is set to Fast, some PC users may experience poor USB communication. Change the USB mode to Slow. To do so, follow these step: Or, ensure that the paper size in the printer driver settings matches the paper selection in the software application settings you use. The printer cable is loose or defective. Disconnect the printer cable and reconnect. Try a print job that you have already printed successfully. If possible, attach the cable and the machine to another computer and try a print job that you know works. Finally, try a new printer cable. The wrong printer driver was selected. Check the application’s printer selection menu to ensure that your machine is selected. The software application is malfunctioning. Try printing a job from another application. The operating system is malfunctioning. Exit Windows and reboot the computer. Turn the machine off and then back on again. 9.6 Troubleshooting Suggested solutions 1 Press Menu until Machine Setup appears on the top line of the display. 2 Press the scroll button ( or ) until USB mode appears and press Ok. 3 Press the scroll button ( or ) until Slow appears and press Ok. 4 Press Stop/Clear to return to standby mode. Printing quality problems Condition If the inside of the machine is dirty or paper has been loaded improperly, you may notice a reduction in print quality. See the table below to clear the problem. Condition Light or faded print AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Toner specks AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Dropouts AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Vertical lines AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Suggested solutions If a vertical white streak or faded area appears on the page: • The toner supply is low. You may be able to temporarily extend the toner cartridge life. See page 8.3. If this does not improve the print quality, install a new toner cartridge. • The paper may not meet paper specifications; for example, the paper is too moist or too rough. See page 3.2. • If the entire page is light, the print resolution setting is too low or the toner save mode is on. Adjust the print resolution and turn the toner save mode off. See the Software Section and page 2.6, respectively. • A combination of faded or smeared defects may indicate that the toner cartridge needs cleaning. See page 8.2. • The surface of the LSU part inside the machine may be dirty. Clean the LSU. See page 8.2. Gray background AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc • The paper may not meet specifications; for example, the paper is too moist or too rough. See page 3.2. • The transfer roller may be dirty. Clean the inside of your machine. See page 8.1. • The paper path may need cleaning. See page 8.2. If black vertical streaks appear on the page: • The drum inside the toner cartridge has probably been scratched. Remove the toner cartridge and install a new one. See page 8.4. If white vertical streaks appear on the page: • The surface of the LSU part inside the machine may be dirty. Clean the LSU (see page 8.2). If the amount of background shading becomes unacceptable: • Change to a lighter weight paper. See page 3.2. • Check the machine’s environment: very dry (low humidity) or high humidity (higher than 80% RH) conditions can increase the amount of background shading. • Remove the old toner cartridge and install a new one. See page 8.4. Toner smear • Clean the inside of the machine. See page 8.1. • Check the paper type and quality. See page 3.2. • Remove the toner cartridge and install a new one. See page 8.4. Vertical repetitive defects If marks repeatedly appear on the printed side of the page at even intervals: • The toner cartridge may be damaged. If a repetitive mark occurs on the page, print a cleaning sheet several times to clean the toner cartridge; see page 8.2. After the printout, if you still have the same problems, remove the toner cartridge and install a new one. See page 8.4. • Parts of the machine may have toner on them. If the defects occur on the back of the page, the problem will likely correct itself after a few more pages. • The fusing assembly may be damaged. Contact a service representative. • If you use inferior quality paper; see page 8.2. AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc If faded areas, generally rounded, occur randomly on the page: • A single sheet of paper may be defective. Try reprinting the job. • The moisture content of the paper is uneven or the paper has moist spots on its surface. Try a different brand of paper. See page 3.2. • The paper lot is bad. The manufacturing processes can cause some areas to reject toner. Try a different kind or brand of paper. • If these steps do not correct the problem, contact a service representative. Suggested solutions 9.7 Troubleshooting Condition Background scatter A Misformed characters Page skew AaBbC AaBbCcc AaBbC AaBbCcc AaBbCc Curl or wave Suggested solutions Condition Background scatter results from bits of toner randomly distributed on the printed page. • The paper may be too damp. Try printing with a different batch of paper. Do not open packages of paper until necessary so that the paper does not absorb too much moisture. • If background scatter occurs on an envelope, change the printing layout to avoid printing over areas that have overlapping seams on the reverse side. Printing on seams can cause problems. • If background scatter covers the entire surface area of a printed page, adjust the print resolution through your software application or the printer properties. Suggested solutions Wrinkles or creases • Ensure that the paper is loaded properly. • Check the paper type and quality. See page 3.2. • Turn over the stack of paper in the tray. Also try rotating the paper 180° in the tray. • Try printing to the rear cover. Back of printouts are dirty Check for leaking toner. Clean the inside of the machine. See page 8.1. Black pages • The toner cartridge may not be installed properly. Remove the toner cartridge and reinsert it. • The toner cartridge may be defective and need replacing. Remove the toner cartridge and install a new one. See page 8.4. • The machine may require repair. Contact a service representative. • If characters are improperly formed and producing hollow images, the paper stock may be too slick. Try a different paper. See page 3.2. • If characters are improperly formed and producing a wavy effect, the scanner unit may need service. For service, contact a service representative. A • Ensure that the paper is loaded properly. • Check the paper type and quality. See page 3.2. • Ensure that the paper or other material is loaded correctly and the guides are not too tight or too loose against the paper stack. • Ensure that the paper is loaded properly. • Check the paper type and quality. Both high temperature and humidity can cause paper curl. See page 3.2. • Turn over the stack of paper in the tray. Also try rotating the paper 180° in the tray. • Try printing to the rear cover. Loose toner • Clean the inside of the machine. See page 8.1. • Check the paper type and quality. See page 3.2. • Remove the toner cartridge and install a new one. See page 8.4. • If the problem persists, the machine may require repair. Contact a service representative. Character Voids Character voids are white areas within parts of characters that should be solid black: • If you are using transparencies, try another type of transparency. Because of the composition of transparencies, some character voids are normal. • You may be printing on the wrong surface of the paper. Remove the paper and turn it around. • The paper may not meet paper specifications. See page 3.2. A 9.8 Troubleshooting Condition Suggested solutions Condition Suggested solutions Horizontal stripes If horizontally aligned black streaks or smears appear: • The toner cartridge may be installed improperly. Remove the toner cartridge and reinsert it. • The toner cartridge may be defective. Remove the toner cartridge and install a new one. See page 8.4. • If the problem persists, the machine may require repair. Contact a service representative. Toner cartridge produces fewer copies than expected before running out of toner. • Your originals may contain pictures, solids, or heavy lines. For example, your originals may be forms, newsletters, books, or other documents that use more toner. • The machine may be turned on and off frequently. • The document cover may be left open while copies are being made. AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Curl Scanning problems If the printed paper is curled or paper does not feed into the machine: • Turn over the stack of paper in the tray. Also try rotating the paper 180° in the tray. • Try printing to the rear cover. Condition Suggested solutions The scanner does not work. • Make sure that you place the document to be scanned face down on the document glass. • There may not be enough available memory to hold the document you want to scan. Try the Prescan function to see if that works. Try lowering the scan resolution rate. • Check that the USB cable is connected properly. • Make sure that the USB cable is not defective. Switch the cable with a known good cable. If necessary, replace the cable. • Check that the scanner is configured correctly. Check scan setting in the SmarThru Configuration or the application you want to use to make certain that the scanner job is being sent to the correct port, for example, LPT1. The unit scans very slowly. • Check if the machine is printing received data. If so, scan the document after the received data has been printed. • Graphics are scanned more slowly than text. • Communication speed slows in scan mode because of the large amount of memory required to analyze and reproduce the scanned image. Set your computer to the ECP printer mode through BIOS setting. It will help to increase the speed. For details about how to set BIOS, refer to your computer User’s Guide. Copying problems Condition Suggested solutions Copies are too light or too dark. Use Darkness to darken or lighten the background of the copies. Smears, lines, marks, or spots appears on copies. • If defects are on the original, use Darkness to lighten the background of your copies. • If no defects are on the original, clean the scan unit. See page 8.2. Copy image is skewed. • Ensure that the original is face down on the document glass. • Check that the paper is loaded correctly. Blank copies print out. Ensure that the original is face down on the document glass. Image rubs off the copy easily. • Replace the paper in the paper input tray with paper from a new package. • In high humidity areas, do not leave paper in the machine for extended periods of time. Frequent copy paper jams occur. • Fan the stack of paper, then turn it over in the paper input tray. Replace the paper in the paper input tray with a fresh supply. Check/adjust the paper guides, if necessary. • Ensure that the paper is the proper paper weight 75 g/m2 (20 lb bond) paper is recommended. • Check for copy paper or pieces of copy paper remaining in the machine after a paper jam has been cleared. 9.9 Troubleshooting Common Linux Problems Condition Suggested solutions Message appears on your computer screen: • “Device can't be set to the H/W mode you want.” • “Port is being used by another program.” • “Port is disabled.” • “Scanner is busy receiving or printing data. When the current job is completed, try again.” • “Invalid handle.” • “Scanning has failed.” • There may be a copying or printing job in progress. When that job is complete, try your job again. • The Selected port is currently being used. Restart your computer and try again. • The printer cable may be improperly connected or the power may be off. • The scanner driver is not installed or the operating environment is not set up properly. • Ensure that the machine is properly connected and the power is on, Then restart your computer. • The USB cable may be improperly connected or the power may be off. Condition Suggested solutions The machine doesn’t print. • Check if the printer driver is installed in your system. Open MFP configurator and switch to the Printers tab in Printers configuration window to look at the list of available printers. Make sure that your machine is displayed on the list. If not, please, invoke Add new printer wizard to set up your device. • Check if the printer is started. Open Printers configuration and select your machine on the printers list. Look at the description in the Selected printer pane. If its status contains “(stopped)” string, please, press the Start button. After that normal operation of the printer should be restored. The “stopped” status might be activated when some problems in printing occurred. For instance, this could be an attempt to print document when MFP port is claimed by a scanning application. • Check if the MFP port is not busy. Since functional components of MFP (printer and scanner) share the same I/O interface (MFP port), the situation of simultaneous access of different “consumer” application to the same MFP port is possible. To avoid possible conflicts, only one of them at a time is allowed to gain control over the device. The other “consumer” will encounter “device busy” response. You should open MFP ports configuration and select the port assigned to your printer. In the Selected port pane you can see if the port is occupied by some other application. If this is the case, you should wait for completion of the current job or should press Release port button, if you are sure that the present owner is not functioning properly. • Check if your application has special print option such as “-oraw”. If “-oraw” is specified in the command line parameter then remove it to print properly. For Gimp front-end, select “print” -> “Setup printer” and edit command line parameter in the command item. The machine does not appear on the scanners list. • Check if your machine is attached to your computer. Make sure that it is connected properly via the USB port and is turned on. • Check if the scanner driver for your machine is installed in your system. Open MFP Configurator, switch to Scanners configuration, then press Drivers. Make sure that driver with a name corresponding to your machine's name is listed in the window. Common windows problems Condition Suggested solutions “File in Use” message appears during installation. Exit all software applications. Remove all software from the StartUp Group, then restart Windows. Reinstall the printer driver. “Error Writing to LPTx” message appears. • Ensure that the cables are connected correctly, the machine is on. • If bi-directional communication is not turned on in the driver, it will also cause this message. “General Protection Fault”, “Exception OE”, “Spool32”, or “Illegal Operation” messages appear. Close all other applications, reboot Windows and try printing again. “Fail To Print”, “A printer timeout error occurred.” messages appear. These messages may appear during printing. Just keep waiting until the machine finishes printing. If the message appears in standby mode or after printing has been completed, check the connection and/or whether an error has occurred. NOTE: Refer to Microsoft Windows 98/Me/2000/XP User’s Guide that came with your PC for further information on Windows error messages. 9.10 Troubleshooting Condition The machine does not appear on the scanners list (continued). The machine doesn’t scan. Suggested solutions Condition • Check if the MFP port is not busy. Since functional components of MFP (printer and scanner) share the same I/O interface (MFP port), the situation of simultaneous access of different “consumer” application to the same MFP port is possible. To avoid possible conflicts, only one of them at a time is allowed to gain control over the device. The other “consumer” will encounter “device busy” response. This can usually happen while starting scan procedure, and appropriate message box appears. • To identify the source of the problem, you should open MFP ports configuration and select the port assigned to your scanner. MFP port's symbol /dev/ mfp0 corresponds to LP:0 designation displayed in the scanners’ options, /dev/mfp1 relates to LP:1 and so on. USB ports start at /dev/mfp4, so scanner on USB:0 relates to /dev/mfp4 respectively and so forth sequentially. In the Selected port pane you can see if the port is occupied by some other application. If this is the case, you should wait for completion of the current job or should press Release port button, if you are sure that the present port's owner is not functioning properly. • Check if a document is loaded into the machine. • Check if your machine is connected to the computer. Make sure if it is connected properly if I/ O error is reported while scanning. • Check if MFP port is not busy. Since functional components of MFP (printer and scanner) share the same I/O interface (MFP port), the situation of simultaneous access of different “consumer” application to the same MFP port is possible. To avoid possible conflicts, only one of them at a time is allowed to gain control over the device. The other “consumer” will encounter “device busy” response. This can usually happen while starting scan procedure, and appropriate message box will be displayed. To identify the source of the problem, you should open MFP ports configuration and select the port assigned to your scanner. MFP port’s symbol /dev/ mfp0 corresponds to LP:0 designation displayed in the scanners’ options, /dev/mfp1 relates to LP:1 and so on. USB ports start at /dev/mfp4, so scanner on USB:0 relates to /dev/mfp4 respectively and so forth sequentially. In the Selected port pane you can see if the port is occupied by some other application. If this is the case, you should wait for completion of the current job or should press Release port button, if you are sure that the present port’s owner is not functioning properly. Suggested solutions I can’t print when I installed both Linux Print Package (LPP) and MFP driver on the same machine simultaneously. • Since both Linux Printer Package and MFP driver make a symbolic link to “lpr” printing command, which is commonly used on Unix clones, it is not recommended to use both package on the same machine. • If you still want to use both packages simultaneously, please install the LPP first. • If you want to uninstall only one of them, please uninstall both packages and install that one you want to use again. • If you don’t want to uninstall MFP driver and install it again, you may make the necessary symbolic link yourself. Please, log in as root user and invoke the following command: ln -sf /usr/local/bin/samsung/slpr /usr/bin/lpr Can’t scan via Gimp Front-end. • Check if Gimp Front-end has “Xsane:Device dialog.” on the “Acquire” menu. If not, you should install Xsane plug-in for Gimp on the your computer. You can find Xsane plug-in package for Gimp on Linux distribution CD or Gimp home page. For the detail information, refer to the Help for Linux distribution CD or Gimp Front-end application. If you wish to use other kind of scan application, refer to the Help for application. I encounter error “Unable to open MFP port device file!” when printing a document. Please avoid changing print job parameters (via SLPR utility, for example) while a print job is in progress. Known versions of CUPS server break the print job whenever print options are changed and then try to restart the job from the beginning. Since Linux MFP driver locks MFP port while printing, the abrupt termination of the driver keeps the port locked and therefore unavailable for subsequent print jobs. If this situation occurred, please, try to release the MFP port. 9.11 Troubleshooting Common macintosh problems Problems in printer setup utility Condition Suggested solutions There is described "driver not installed" at Product List Window after you click Add and Select USB. • Software is not installed correctly. Reinstall the software. See Software Section. • Make sure that you are using a high-quality cable. Your product not listed at Product List Window after you click Add and Select USB. • Make sure that the cables are connected correctly and the machine is turned on. • Check if “Ready” appears on the display of the control panel. If not, clear the problem depending on the error message; see “Understanding display messages” on page 9.4. • Make sure that the correct printer driver has been selected at Product List Window after you click Add and Select USB. 9.12 Troubleshooting 10 Item Specifications Duty cycle This chapter includes: Description Monthly print: Up to 10,000 pages a Sound Pressure Level, ISO7779 b The number of pages may be affected by operating environment, printing interval, media type, and media size. • General specifications • Scanner and copier specifications • Printer specifications Scanner and copier specifications Item General specifications Item Description Model name EG42MFC (SCX-4200) Paper input capacity Tray with multi-pages: 250 multi-pages for plain paper (20 lb bond, 75 g/m2) Tray with single page and manual tray: 1 single page for plain paper, transparencies, labels, Post Card and envelopes (16 ~43 lb bond, 60 ~ 165 g/m2) Paper output capacity Face down: 50 sheets 1-piece toner cartridge system Power rating 110 - 127 VAC, 50/60 Hz, 4.0 A (USA, Canada) 220 - 240 VAC, 50/60 Hz, 2.5 A (Others) Power consumption Average: 350 W Power save mode: Less than 10 W Noise levela Standby mode: Less than 38 dBA Scanning / Printing mode: Less than 53 dBA Less than 42 seconds First print out time Standby mode: less than 11 seconds Cold status: less than 53 seconds Operating environment Temperature: 50° F to 89° F (10° C to 32° C) Color CIS Resolution Optical: Max. 600 x 2400 dpi (Mono and color) Effective scanning length Max. 297 mm (11.7 inches) Effective scanning width Max. 216 mm (8.5 inches) Effective: 208 mm (8.2 inches) Color bit depth 24 bit Mono bit depth 1 bit for Black & White mode 8 bit for Gray mode Copy speeda Up to 18 ppm in A4 (19 ppm in Letter) Copy resolution Scan: up to 600 x 300 dpi (Text, Text/Photo) Zoom rate 50 ~ 200% Multiple copies 1-99 pages Gray scale 256 levels a Copy Speed is based on Single Document Multiple Copy. Humidity: 20% to 80% RH Display Toner cartridge life Scanning method up to 600 x 600 dpi (Photo) Print: up to 600 x 600 dpi (Text, Text/Photo, Photo) Warm-up: Less than 45 dBA Warm-up time TWAIN standard/ WIA standard Enhanced: 4,800 x 4,800 dpi Face up: 1 sheet Consumables 16 characters x 2 lines b 3,000 pages at ISO 19752 5% coverage (Ships with 1,000 pages toner cartridge) Memory 8 MB (Non-extendable) External dimension 409 x 362 x 232 mm (16.1 x 14.3 x 9.1 inches) (W x D x H) Weight 9.3 Kg (including consumables) Package weight Paper: 2.16 Kg, Plastic: 0.4 Kg Description Compatibility 10.1 Specifications Printer specifications Item Description Printing method Laser Beam Printing Printing speeda Up to 18 ppm in A4 (19 ppm in Letter) First print out time 11 seconds (From Ready) Print resolution Up to 600 x 600 dpi Printer language OS Compatibility Inteface SPL (Samsung Printer Language) b Windows 98/Me/2000/XP, Various Linux OS, Macintosh 10.3/10.4 USB 2.0 a Print speed will be affected by operating system used, computing performance, application software, connecting method, media type, media size, and job complexity. b Please visit www.samsungprinter.com to download the latest software version. 10.2 Specifications INDEX Numerics D 2-up, special copy 4.3 display language, change 2.6 document glass cleaning 8.2 loading document 3.1 document, loading 3.1 drum, clean 8.2 A auto fit, sepcial copy 4.2 C cleaning drum 8.2 inside 8.1 LSU 8.2 outside 8.1 scan unit 8.2 clone, special copy 4.2 component location 1.2 connection power cord 2.5 USB 2.5 consumables 8.4 contrast, copy 4.1 control panel 1.3 copying 2-up 4.3 auto fit 4.2 clone 4.2 darkness 4.1 default setting, change 4.2 ID card 4.2 original type 4.1 poster 4.3 reduce/enlarge 4.1 time out, set 4.3 E error messages 9.4 I ID card, special copy 4.2 installing, toner cartridge 2.2 J jam, clear 9.1 L Linux problems 9.10 loading documents document galss 3.1 loading, paper in the manual feeder 3.5 in the paper input tray 2.3 M Macintosh problems 9.12 manual feeder 3.5 memory, clear 8.1 O order information, toner cartridges 7.1 1 output location, select 3.6 output tray 3.6 P paper guidelines 3.3 paper jam, clear 9.1 paper load in paper input tray 2.3 in the manual feeder 3.5 paper size setting 3.6 specifications 3.2 paper type setting 3.6 specifications 3.2 poster, special copy 4.3 power save mode, use 2.6 power, connecting 2.5 print quality problems, solve 9.7 printing, reports 8.1 problem, solve copying 9.9 error messages 9.4 Linux 9.10 Macintosh 9.12 paper feeding 9.4 printing 9.5 printing quality 9.7 scanning 9.9 Windows 9.10 R rear cover, use 3.7 replacing, toner cartridge 8.4 reports, print 8.1 S scanning 6.1 software overview 2.7 special materials, guidelines 3.4 specifications general 10.1 paper 3.2 printer 10.2 scanner and copier 10.1 Status LED 9.3 system requirements Windows 2.8 T toner cartridge installing 2.2 maintaining 8.3 order information 7.1 redistributing 8.3 replacing 8.4 toner save mode, use 2.6 U USB, connecting 3.6 2 Samsung Printer Software section SOFTWARE SECTION CONTENTS Chapter 1: INSTALLING PRINTER SOFTWARE IN WINDOWS Installing Printer Software ........................................................................................................ 4 Reinstalling Printer Software ..................................................................................................... 6 Removing Printer Software ....................................................................................................... 6 Chapter 2: BASIC PRINTING Printing a Document ................................................................................................................ 7 Printer Settings ....................................................................................................................... 8 Layout Tab .................................................................................................................... 8 Paper Tab ...................................................................................................................... 9 Graphics Tab ............................................................................................................... 10 Extras Tab ................................................................................................................... 11 About Tab ................................................................................................................... 11 Printer Tab .................................................................................................................. 11 Using a Favorite Setting ................................................................................................ 12 Using Help ................................................................................................................... 12 Chapter 3: ADVANCED PRINTING Printing Multiple Pages on One Sheet of Paper (N-Up Printing) ..................................................... 13 Printing Posters ..................................................................................................................... 14 Printing a Reduced or Enlarged Document ................................................................................ 14 Fitting Your Document to a Selected Paper Size ......................................................................... 14 Using Watermarks ................................................................................................................. 15 Using an Existing Watermark ......................................................................................... 15 Creating a Watermark ................................................................................................... 15 Editing a Watermark ..................................................................................................... 15 Deleting a Watermark ................................................................................................... 15 1 Using Overlays ...................................................................................................................... 16 What is an Overlay? ...................................................................................................... 16 Creating a New Page Overlay ......................................................................................... 16 Using a Page Overlay .................................................................................................... 16 Deleting a Page Overlay ................................................................................................ 16 Chapter 4: SHARING THE PRINTER LOCALLY Setting Up a Host Computer ................................................................................................... 17 Setting Up a Client Computer .................................................................................................. 17 Chapter 5: USING SMART PANEL Understanding Smart Panel .................................................................................................... 18 Opening the Troubleshooting Guide ......................................................................................... 18 Changing the Smart Panel Program Settings ............................................................................. 19 Chapter 6: SCANNING Scanning Using Samsung SmarThru ......................................................................................... 20 Uninstalling Samsung SmarThru ..................................................................................... 20 Using Samsung SmarThru ............................................................................................. 21 Using Onscreen Help File ............................................................................................... 22 Scanning Process with TWAIN-enabled Software ........................................................................ 22 Scanning Using the WIA Driver ................................................................................................ 22 Chapter 7: USING YOUR PRINTER IN LINUX Getting Started ..................................................................................................................... 23 Installing the MFP Driver ........................................................................................................ 23 System Requirements ................................................................................................... 23 Installing the MFP Driver ............................................................................................... 24 Uninstalling the MFP Driver ............................................................................................ 25 Using the MFP Configurator ..................................................................................................... 25 Opening the MFP Configurator ........................................................................................ 25 Printers Configuration ................................................................................................... 26 Scanners Configuration ................................................................................................. 26 MFP Ports Configuration ................................................................................................ 27 2 Configuring Printer Properties ................................................................................................. 27 Printing a Document .............................................................................................................. 28 Printing from Applications .............................................................................................. 28 Printing Files ................................................................................................................ 28 Scanning a Document ............................................................................................................ 29 Using the Image Editor ................................................................................................. 30 Chapter 8: USING YOUR PRINTER WITH A MACINTOSH Installing Software for Macintosh ............................................................................................. 31 Setting Up the Printer ............................................................................................................ 32 For a Network-connected Macintosh ................................................................................ 32 For a USB-connected Macintosh ..................................................................................... 32 Printing ................................................................................................................................ 33 Printing a Document ..................................................................................................... 33 Changing Printer Settings .............................................................................................. 33 Printing Multiple Pages on One Sheet of Paper .................................................................. 34 Scanning .............................................................................................................................. 35 3 1 This is recommended for most users. All components necessary for printer operations will be installed. Installing Printer Software in Windows This chapter includes: 1 Make sure that the printer is connected to your computer and powered on. 2 Insert the supplied CD-ROM into your CD-ROM drive. The CD-ROM should automatically run, and an installation window appears. • Installing Printer Software • Reinstalling Printer Software If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with the letter which represents your drive and click OK. • Removing Printer Software Installing Printer Software You can install the printer software for local printing. To install the printer software on the computer, perform the appropriate installation procedure depending on the printer in use. A printer driver is software that lets your computer communicate with your printer. The procedure to install drivers may differ depending on the operating system you are using. All applications should be closed on your PC before beginning installation. A local printer is a printer directly attached to your computer using the printer cable supplied with your printer, such as a USB or parallel cable. 3 Click Next. • If necessary, select a language from the drop-down list. You can install the printer software using the typical or custom method. • View User’s Guide: Allows you to view the User’s Guide. If your computer doesn’t have Adobe Acrobat, click on this option and it will automatically install Adobe Acrobat Reader for you. NOTE: If the “New Hardware Wizard” window appears during the installation procedure, click in the upper right corner of the box to close the window, or click Cancel. 4 Choose the type of installation. Click Next. • Typical: Installs the most common software for your printer. This is recommended for most users. • Custom: Allows you to choose the individual components you want to install. 4 Installing Printer Software in Windows 7 NOTE: If your printer is not already connected to the computer, the following window will appear. To register yourself as a user of Samsung Printers in order to receive information from Samsung, select the checkbox and click Finish. You are now sent to the Samsung web site. Otherwise, just click Finish. • After connecting the printer, click Next. • If you don’t want to connect the printer at this time, click Next, and No on the following screen. Then the installation will start and a test page will not be printed at the end of the installation. • The installation window that appears in this User’s Guide may differ depending on the printer and interface in use. 5 NOTE: After setup is complete, if your printer driver doesn’t work properly, reinstall the printer driver. See “Reinstalling Printer Software” on page 6. After the installation is finished, a window asking you to print a test page appears. If you choose to print a test page, select the checkbox and click Next. Otherwise, just click Next and skip to step 7. 6 If the test page prints out correctly, click Yes. If not, click No to reprint it. 5 Installing Printer Software in Windows Reinstalling Printer Software Removing Printer Software You can reinstall the software if installation fails. 1 Start Windows. 1 2 2 3 From the Start menu select Programs or All Programs → your printer driver name → Maintenance. Select Repair and click Next. 3 You will see a component list so that you can reinstall any item individually. 4 5 NOTE: If your printer is not already connected to the computer, the following window will appear. 6 Start Windows. From the Start menu select Programs or All Programs → your printer driver name → Maintenance. Select Remove and click Next. You will see a component list so that you can remove any item individually. Select the components you want to remove and then click Next. When your computer asks you to confirm your selection, click Yes. The selected driver and all of its components are removed from your computer. After the software is removed, click Finish. • After connecting the printer, click Next. • If you don’t want to connect the printer at this time, click Next, and No on the following screen. Then the installation will start and a test page will not be printed at the end of the installation. • The reinstallation window that appears in this User’s Guide may differ depending on the printer and interface in use. 4 Select the components you want to reinstall and click Next. If you you select your printer driver name and reinstall the printer software for local printing, the window asking you to print a test page appears. Do as follows: a. To print a test page, select the check box and click Next. b. If the test page prints out correctly, click Yes. 5 If it doesn’t, click No to reprint it. When the reinstallation is done, click Finish. 6 Installing Printer Software in Windows 2 1 2 Basic Printing This chapter explains the printing options and common printing tasks in Windows. Open the document you want to print. Select Print from the File menu. The Print window is displayed. It may look slightly different depending on your application. The basic print settings are selected within the Print window. These settings include the number of copies and print range. This chapter includes: • Printing a Document • Printer Settings - Layout Tab - Paper Tab Make sure that your printer is selected. - Graphics Tab - Extras Tab - About Tab - Printer Tab - Using a Favorite Setting - Using Help 3 Printing a Document 4 NOTE: • Your printer driver Properties window that appears in this User’s Guide may differ depending on the printer in use. However the composition of the printer properties window is similar. • Check the Operating System(s) that are compatible with your printer. Please refer to the OS Compatibility section of Printer Specifications in your Printer User’s Guide. • If you need to know the exact name of your printer, you can check the supplied CD-ROM. 5 6 The following procedure describes the general steps required for printing from various Windows applications. The exact steps for printing a document may vary depending on the application program you are using. Refer to the User’s Guide of your software application for the exact printing procedure. 7 Basic Printing Select your printer driver from the Name drop-down list. To take advantage of the printer features provided by your printer driver, click Properties or Preferences in the application’s Print window. For details, see “Printer Settings” on page 8. If you see Setup, Printer, or Options in your Print window, click it instead. Then click Properties on the next screen. Click OK to close the printer properties window. To start the print job, click OK or Print in the Print window. Layout Tab Printer Settings The Layout tab provides options to adjust how the document appears on the printed page. The Layout Options includes Multiple Pages per Side and Poster Printing. See “Printing a Document” on page 7 for more information on accessing printer properties. You can use the printer properties window, which allows you to access all of the printer options you need when using your printer. When the printer properties are displayed, you can review and change the settings needed for your print job. Your printer properties window may differ, depending on your operating system. This Software User’s Guide shows the Properties window for Windows 98. 1 Your printer driver Properties window that appears in this User’s Guide may differ depending on the printer in use. 2 If you access printer properties through the Printers folder, you can view additional Windows-based tabs (refer to your Windows User’s Guide) and the Printer tab (see “Printer Tab” on page 11). NOTES: • Most Windows applications will override settings you specify in the printer driver. Change all print settings available in the software application first, and change any remaining settings using the printer driver. • The settings you change remain in effect only while you are using the current program. To make your changes permanent, make them in the Printers folder. • The following procedure is for Windows XP. For other Windows OS, refer to the corresponding Windows User's Guide or online help. 1. Click the Windows Start button. 2. Select Printers and Faxes. 3. Select your printer driver icon. 4. Right-click on the printer driver icon and select Printing Preferences. 5. Change the settings on each tab, click OK. 1 Paper Orientation Paper Orientation allows you to select the direction in which information is printed on a page. • Portrait prints across the width of the page, letter style. • Landscape prints across the length of the page, spreadsheet style. • Rotate allows you to rotate the page the selected degrees. Portrait Landscape 2 Layout Options Layout Options allows you to select advanced printing options. You can choose Multiple Pages per Side and Poster Printing. • For details, see “Printing Multiple Pages on One Sheet of Paper (N-Up Printing)” on page 13. • For details, see “Printing Posters” on page 14 8 Basic Printing Paper Tab 3 Source Make sure that Source is set to the corresponding paper tray. Use Manual Feed when printing on special materials like envelopes and transparencies. You have to load one sheet at a time into the Manual Tray or Multi-Purpose Tray. If the paper source is set to Auto Select, the printer automatically picks up print material in the following tray order: Manual Tray or Multi-Purpose Tray, Tray1, Optional Tray2 Use the following options to set the basic paper handling specifications when you access the printer properties. See “Printing a Document” on page 7 for more information on accessing printer properties. Click the Paper tab to access various paper properties. 1 4 Type Make sure that Type is set to Printer Default. If you load a different type of print material, select the corresponding paper type. If you use cotton paper, set the paper type to Thick for best printing. To use recycled paper, with weighs from 20lb to 24lb (75~90g/m2), or colored paper, select Color Paper. 2 3 4 5 Scaling Printing Scaling Printing allows you to automatically or manually scale your print job on a page. You can choose from None, Reduce/ Enlarge, and Fit to Page. • For details, see “Printing a Reduced or Enlarged Document” on page 14. • For details, see “Fitting Your Document to a Selected Paper Size” on page 14. 5 1 Copies Copies allows you to choose the number of copies to be printed. You can select 1 to 999 copies. 2 Size Size allows you to set the size of paper you loaded in the tray. If the required size is not listed in the Size box, click Custom. When the Custom Paper Setting window appears, set the paper size and click OK. The setting appears in the list so that you can select it. 9 Basic Printing Graphics Tab Advanced Options Use the following Graphic options to adjust the print quality for your specific printing needs. See “Printing a Document” on page 7 for more information on accessing printer properties. You can set advanced settings by clicking the Advanced Options button. • TrueType Options: This option determines what the driver tells the printer about how to image the text in your document. Select the appropriate setting according to the status of your document. This option may be available only in Windows 9x/Me, depending on your particular printer model. - Download as Bitmap: When this option is selected, the driver will download the font data as bitmap images. Documents with complicated fonts, such as Korean or Chinese, or various other fonts, will print faster in this setting. - Print as Graphics: When this option is selected, the driver will download any fonts as graphics. When printing documents with high graphic content and relatively few TrueType fonts, printing performance (speed) may be enhanced in this setting. • Print All Text To Black: When the Print All Text To Black option is checked, all text in your document prints solid black, regardless of the color it appears on the screen. • Print All Text To Darken: When the Print All Text To Darken option is checked, all text in your document is allowed to print darker than on a normal document. Some printers do not support this feature. Click the Graphic tab to display the properties shown below.. Resolution The Resolution options you can select may vary depending on your printer model. The higher the setting, the sharper the clarity of printed characters and graphics. The higher setting also may increase the time it takes to print a document. Toner Save Mode Selecting this option extends the life of your toner cartridge and reduces your cost per page without a significant reduction in print quality. Some printers do not support this feature. • Printer Setting: If you select this option, this feature is determined by the setting you’ve made on the control panel of the printer. • On: Select this option to allow the printer to use less toner on each page. • Off: If you don’t need to save toner when printing a document, select this option. Darkness Use this option to lighten or darken your print job. • Normal(1,2,3): This setting is for normal documents. • Light: This setting is for bolder line widths or darker gray-scale images. • Dark: This setting is for finer line width, higher definition in graphics, and lighter gray-scale images. 10 Basic Printing Extras Tab About Tab You can select output options for your document. See “Printing a Document” on page 7 for more information about accessing the printer properties. Use the About tab to display the copyright notice and the version number of the driver. If you have an Internet browser, you can connect to the Internet by clicking on the web site icon. See “Printing a Document” on page 7 for more information about accessing printer properties. Click the Extras tab to access the following feature: 1 Printer Tab 2 If you access printer properties through the Printers folder, you can view the Printer tab. You can set the printer configuration. 3 The following procedure is for Windows XP. For other Windows OS, refer to the corresponding Windows User's Guide or online help. 1 Click the Windows Start menu. 2 3 4 5 Select Printers and Faxes. Select your printer driver icon. Right-click on the printer driver icon and select Properties. Click the Printer tab and set the options. High Altitude Correction If your printer is going to be used at a high altitude, checking this option will optimize the print quality for those circumstances. 1 Watermark You can create a background text image to be printed on each page of your document. For details, see “Using Watermarks” on page 15. 2 Overlay Overlays are often used to take the place of preprinted forms and letterhead paper. For details, see “Using Overlays” on page 16. 3 Output Options • Print Subset: You can set the sequence in which the pages print. Select the print order from the drop-down list. - Normal(1,2,3): Your printer prints all pages from the first page to the last page. - Reverse All Pages(3,2,1): Your printer prints all pages from the last page to the first page. - Print Odd Pages: Your printer prints only the odd numbered pages of the document. - Print Even Pages: Your printer prints only the even numbered pages of the document. 11 Basic Printing Using a Favorite Setting The Favorites option, which is visible on each properties tab, allows you to save the current properties settings for future use. To save a Favorites item: 1 2 Change the settings as needed on each tab. 3 Click Save. Enter a name for the item in the Favorites input box. When you save Favorites, all current driver settings are saved. To use a saved setting, select the item from the Favorites drop down list. The printer is now set to print according to the Favorites setting you selected. To delete a Favorites item, select it from the list and click Delete. You can also restore the printer driver’s default settings by selecting Printer Default from the list. Using Help Your printer has a help screen that can be activated by clicking the Help button in the printer properties window. These help screens give detailed information about the printer features provided by the printer driver. You can also click from the upper right corner of the window, and then click on any setting. 12 Basic Printing 3 Advanced Printing Printing Multiple Pages on One Sheet of Paper (N-Up Printing) This chapter explains printing options and advanced printing tasks. 1 2 3 4 NOTE: • Your printer driver Properties window that appears in this User’s Guide may differ depending on the printer in use. However the composition of the printer properties window is similar. • If you need to know the exact name of your printer, you can check the supplied CD-ROM. You can select the number of pages to print on a single sheet of paper. To print more than one page per sheet, the pages will be reduced in size and arranged in the order you specify. You can print up to 16 pages on one sheet. 1 2 3 This chapter includes: • Printing Multiple Pages on One Sheet of Paper (N-Up Printing) 4 • Printing Posters • Printing a Reduced or Enlarged Document • Fitting Your Document to a Selected Paper Size 5 • Using Watermarks 6 • Using Overlays 13 Advanced Printing To change the print settings from your software application, access printer properties. See “Printing a Document” on page 7. From the Layout tab, choose Multiple Pages per Side in the Layout Type drop-down list. Select the number of pages you want to print per sheet (1, 2, 4, 6, 9, or 16) in the Pages per Side drop-down list. Select the page order from the Page Order drop-down list, if necessary. Check Print Page Border to print a border around each page on the sheet. Click the Paper tab, select the paper source, size, and type. Click OK and print the document. Printing Posters Printing a Reduced or Enlarged Document This feature allows you to print a single-page document onto 4, 9, or 16 sheets of paper, for the purpose of pasting the sheets together to form one poster-size document. 1 2 3 You can change the size of a page’s content to appear larger or smaller on the printed page. To change the print settings from your software application, access printer properties. See “Printing a Document” on page 7. Click the Layout tab, select Poster Printing in the Layout Type drop-down list. Configure the poster option: 1 2 3 You can select the page layout from Poster<2x2>, Poster<3x3>, or Poster<4x4>. If you select Poster<2x2>, the output will be automatically stretched to cover 4 physical pages. 4 5 To change the print settings from your software application, access printer properties. See “Printing a Document” on page 7. From the Paper tab, select Reduce/Enlarge in the Printing Type drop-down list. Enter the scaling rate in the Percentage input box. You can also click the or button. Select the paper source, size, and type in Paper Options. Click OK and print the document. Fitting Your Document to a Selected Paper Size Specify an overlap in millimeters or inches to make it easier to pasting the sheets together. A 0.15 inches This printer feature allows you to scale your print job to any selected paper size regardless of the digital document size. This can be useful when you want to check fine details on a small document. 1 0.15 inches 4 5 2 Click the Paper tab, select the paper source, size, and type. Click OK and print the document. You can complete the poster by pasting the sheets together. 3 4 5 14 Advanced Printing To change the print settings from your software application, access printer properties. See “Printing a Document” on page 7. From the Paper tab, select Fit to Page in the Printing Type drop-down list. Select the correct size from the Target Page drop-down list. Select the paper source, size, and type in Paper Options. Click OK and print the document. Editing a Watermark Using Watermarks 1 The Watermark option allows you to print text over an existing document. For example, you may want to have large gray letters reading “DRAFT” or “CONFIDENTIAL” printed diagonally across the first page or all pages of a document. 2 There are several predefined watermarks that come with the printer, and they can be modified, or you can add new ones to the list. 3 4 5 Using an Existing Watermark 1 2 3 To change the print settings from your software application, access printer properties. See “Printing a Document” on page 7. Click the Extras tab, and select the desired watermark from the Watermark drop-down list. You will see the selected watermark in the preview image. Click OK and start printing. 1 2 3 it is printed. 4 Creating a Watermark 2 3 4 5 6 Click OK until you exit the Print window. Deleting a Watermark NOTE: The preview image shows how the page will look when 1 To change the print settings from your software application, access printer properties. See “Printing a Document” on page 7. Click the Extras tab and click the Edit button in the Watermark section. The Edit Watermark window appears. Select the watermark you want to edit from the Current Watermarks list and change the watermark message and options. Click Update to save the changes. To change the print settings from your software application, access printer properties. See “Printing a Document” on page 7. Click the Extras tab, and click the Edit button in the Watermark section. The Edit Watermark window appears. Enter a text message in the Watermark Message box. You can enter up to 40 characters. The message displays in the preview window. When the First Page Only box is checked, the watermark prints on the first page only. Select watermark options. You can select the font name, style, size, or grayscale level from the Font Attributes section and set the angle of the watermark from the Message Angle section. Click Add to add a new watermark to the list. When you have finished editing, click OK and start printing. To stop printing the watermark, selectfrom the Watermark drop-down list. 15 Advanced Printing To change the print settings from your software application, access printer properties. See “Printing a Document” on page 7. From the Extras tab, click the Edit button in the Watermark section. The Edit Watermark window appears. Select the watermark you want to delete from the Current Watermarks list and click Delete. Click OK until you exit the Print window. Using a Page Overlay Using Overlays After an overlay has been created, it is ready to be printed with your document. To print an overlay with a document: 1 2 What is an Overlay? Dear ABC Regards WORLD BEST An overlay is text and/or images stored in the computer hard disk drive (HDD) as a special file format that can be printed on any document. Overlays are often used to take the place of preprinted forms and letterhead paper. Rather than using preprinted letterhead, you can create an overlay containing the exact same information that is currently on your letterhead. To print a letter with your company’s letterhead, you do not need to load preprinted letterhead paper in the printer. You need only tell the printer to print the letterhead overlay on your document. 3 4 5 To use a page overlay, you must create a new page overlay containing your logo or image. WORLD BEST 2 3 4 5 6 7 To change the print settings from your software application, access printer properties. See “Printing a Document” on page 7. Click the Extras tab. Select the desired overlay from the Overlay drop-down list box. If the overlay file you want does not appear in the Overlay list, click Edit button and Load Overlay, and select the overlay file. If you have stored the overlay file you want to use in an external source, you can also load the file when you access the Load Overlay window. Creating a New Page Overlay 1 Create or open the document you want to print. 6 Create or open a document containing text or an image for use in a new page overlay. Position the items exactly as you wish them to appear when printed as an overlay. To save the document as an overlay, access printer properties. See “Printing a Document” on page 7. Click the Extras tab, and click Edit button in the Overlay section. In the Edit Overlay window, click Create Overlay. 7 After you select the file, click Open. The file appears in the Overlay List box and is available for printing. Select the overlay from the Overlay List box. If necessary, click Confirm Page Overlay When Printing. If this box is checked, a message window appears each time you submit a document for printing, asking you to confirm your wish to print an overlay on your document. If this box is not checked and an overlay has been selected, the overlay automatically prints with your document. Click OK or Yes until printing begins. In the Create Overlay window, type a name of up to eight characters in the File name box. Select the destination path, if necessary. (The default is C:\Formover). Click Save. The name appears on the Overlay List box. NOTE: The resolution of the overlay document must be the Click OK or Yes to finish creating. same as that of the document you will print with the overlay. The selected overlay downloads with your print job and prints on your document. The file is not printed. Instead it is stored on your computer hard disk drive. Deleting a Page Overlay NOTE: The overlay document size must be the same as the documents you print with the overlay. Do not create an overlay with a watermark. You can delete page overlays that you no longer use. 1 2 3 4 5 6 16 Advanced Printing In the printer properties window, click the Extras tab. Click the Edit button in the Overlay section. Select the overlay you want to delete from the Overlay List box. Click Delete Overlay. When a confirming message window appears, click Yes. Click OK until you exit the Print window. 4 Sharing the Printer Locally Setting Up a Host Computer 1 2 3 4 5 6 You can connect the printer directly to a selected computer, which is called “host computer,” on the network. The following procedure is for Windows XP. For other Windows OS, refer to the corresponding Windows User's Guide or online help. NOTES: • Check the Operating System(s) that are compatible with your printer. Please refer to the OS Compatibility section of Printer Specifications in your Printer User’s Guide. • If you need to know the exact name of your printer, you can check the supplied CD-ROM. Start Windows. From the Start menu select Printers and Faxes. Double-click your printer driver icon. From the Printer menu, select Sharing. Check the Share this printer box. Fill in the Shared Name field, and then click OK. Setting Up a Client Computer 1 Right-click the Windows Start button and select Explorer. 2 Open your network folder in the left column. 3 Click the shared name. 4 From the Start menu select Printers and Faxes. 5 Double-click your printer driver icon. 6 From the Printer menu, select Properties. 7 From the Ports tab, click Add Port. 8 Select Local Port and click New Port. 9 Fill in the Enter a port name field with the shared name. 10 Click OK and click Close. 11 Click Apply and click OK. 17 Sharing the Printer Locally 5 The Smart Panel program displays the current status of the printer, various information, lets you change settings and the level of toner remaining in the toner cartridge(s). Using Smart Panel Smart Panel is a program that monitors and informs you of the status of the printer, and allows you to customize the printer’s settings. Smart Panel is installed automatically when you install the printer software. NOTES: 1 • To use the this program, you need: - Windows 98 or higher (Windows NT 4.0 can be used only for network-supported printers.) To check for Operating System(s) that are compatible with your printer, refer to Printer Specifications in your Printer User’s Guide. - Internet Explorer version 5.0 or higher for flash animation in HTML Help. • If you need to know the exact name of your printer, you can check the supplied CD-ROM. 1 Toner Level You can view the level of toner remaining in the toner cartridge(s). The printer and the number of the toner cartridge(s) shown above window may differ depending on the printer in use. Buy Now You can order replacement toner cartridge online. Troubleshooting Guide You can view Help to solve problems. Understanding Smart Panel Driver Setting You can use the printer properties window, which allows you to access all of the printer options you need for using your printer. For details, See “Printer Settings” on page 8. If an error occurs while printing, Smart Panel appears automatically, showing the error. You can also launch Smart Panel manually from the Windows task bar. Double-click the Smart Panel icon on the Windows task bar. Double click this icon. Opening the Troubleshooting Guide Or, from the Start menu, select Programs or All Programs → your printer driver name → Smart Panel. Using the troubleshooting guide, you can view solutions for error status problems. NOTES: Right-click the Smart Panel icon on the Windows task bar and select Troubleshooting Guide. • If you have already installed more than one Samsung printer, first select the printer model you want in order to use the corresponding Smart Panel. Right-click the Smart Panel icon on the Windows task bar and select your printer name. • The Smart Panel window and its contents shown in this Software User’s Guide may differ depending on the printer in use. 18 Using Smart Panel Changing the Smart Panel Program Settings Right-click the Smart Panel icon on the Windows task bar and select Options. The following window opens. • Display when job is finished for network printer: The computer shows the Smart Panel popup window or balloon when your job is complete. (Only for a network supported printer.) • Display when error occurs during printing: The computer shows the Smart Panel popup window or balloon when an error occurs during printing. • Display with: You can select how the computer shows you a message. If you select Popup window (smart panel), the message appears in the Smart Panel pop window. • Launch Job Monitor when the job is saved in the printer: If you store print jobs on the printer’s hard disk, the computer opens the Job Monitor window. (Only for a network supported printer with a built-in hard disk.) • Schedule an automatic status checking every: The computer updates the printer status regularly. Setting the value close to 1 second causes the computer to check the printer status more frequently, thereby allowing a faster response to any printer error. 19 Using Smart Panel 6 Scanning Scanning Using Samsung SmarThru Scanning with your machine lets you turn pictures and text into digital files on your computer. Then you can fax or e-mail the files, display them on your web site or use them to create projects that you can print using Samsung SmarThru software or the WIA driver. Samsung SmarThru is the accompanying software for your machine. With SmarThru, scanning is the proverbial piece of cake. This chapter includes: NOTE: You can use SmarThru 4 in Windows 98 or higher. • Scanning Using Samsung SmarThru • Scanning Process with TWAIN-enabled Software • Scanning Using the WIA Driver Uninstalling Samsung SmarThru NOTES: NOTE: Before beginning uninstallation, ensure that all • Check the Operating System(s) that are compatible with your printer. Please refer to the OS Compatibility section of Printer Specifications in your Printer User’s Guide. • You can check your printer name in the supplied CDROM. • The maximum resolution that can be achieved depends upon various factors, including computer speed, available disk space, memory, the size of the image being scanned, and bit depth settings. Thus, depending on your system and what you are scanning, you may not be able to scan at certain resolutions, especially using enhanced dpi. applications are closed on your computer. 1 From the Start menu, select Programs. 2 Select SmarThru 4, and then select Uninstall SmarThru 4. 3 When your computer asks you to confirm, click OK. 4 Click Finish. You may be prompted to restart your computer. In this case you must shut the computer down and then restart it before the changes will be saved. 20 Scanning Using Samsung SmarThru 4 Follow these steps to start scanning using the SmarThru: 1 Make sure that your machine and computer are turned on and properly connected to each other. 2 Place your photograph or page on the document glass or ADF. 3 Once you have installed Samsung SmarThru, you will see the SmarThru 4 icon on your desktop. Double-click the SmarThru 4 icon. Click Scan To. The Scan To menu bar appears on the SmarThru 4 window. Scan To menu bar Adjust the scan settings. Double-click this icon. Click to start scanning. The SmarThru 4 window opens. Scan To lets you use the following services: •Application Scanning an image and placing it in an image editor application, such as Paint or Adobe Photoshop. Make sure that your printer is selected. •E-mail Scanning an image and emailing it. Allows you to scan an image, preview it, and email it. •Scan To NOTE: To send an image by e-mail, you must have a mail Allows you to scan an image and save it to an application or folder, email it, or publish it on a web site. client program, like Outlook Express, which has been set up with your e-mail account. •Image Allows you to edit an image you have saved as a graphic file and send it to a selected application or folder, email it, or publish it on a web site. •Folder Scanning an image and saving it to a folder. Allows you to scan an image, preview it, and save it to the folder of your choice. •Copy Allows you to produce professional quality copies. You can make black and white or color copies of an image if your machine supports it, and customize the copy settings. •OCR Scanning an image and performing text recognition. Allows you to scan an image, preview it, and send it to the OCR program for text recognition. •Print Allows you to print images you have saved. You can print images in black and white or color mode if your machine supports it. - Recommended Scan Option for OCR - Resolution: 200 or 300 dpi - Image Type: Grayscale or Black & White •Fax •Web Allows you to fax images or files you have saved on your computer. This is available when your machine supports the fax feature. Scanning an image, previewing it, and publishing it on a web site, using the specified file format for the image you want to publish. •Settings Customizing settings of Scan To basic functions. Allows you to customize settings for Application, E-mail, OCR, and Web functions. 21 Scanning 5 Click the service icon according to your job. 6 SmarThru 4 opens for the selected service. Adjust the scan settings. 7 To start scanning, click Scan. Scanning Using the WIA Driver Your machine also supports the Windows Image Acquisition (WIA) driver for scanning images. WIA is one of the standard components provided by Microsoft Windows XP and works with digital cameras and scanners. Unlike the TWAIN driver, the WIA driver allows you to scan and easily manipulate images without using additional software. NOTE: If you want to cancel the scan job, click Cancel. NOTE: The WIA driver works only on Windows XP with USB Using Onscreen Help File port. For more information about SmarThru, click at the top right corner of the window. The SmarThru Help window opens and allows you to view onscreen help supplied on the SmarThru program. 1 Load the document(s) face up into the ADF. OR 2 Scanning Process with TWAINenabled Software 3 4 If you want to scan documents using other software, you will need to use TWAIN-compliant software, such as Adobe PhotoDeluxe or Adobe Photoshop. The first time you scan with your machine, select it as your TWAIN source in the application you use. Place a single document face down on the document glass. From the Start menu on your desktop window, select Settings, Control Panel, and then Scanners and Cameras. Double click your scanner driver icon. The Scanner and Camera Wizard launches. Choose your scanning preferences and click Preview to see how your preferences affect the picture. The basic scanning process involves a number of steps: 1 2 Make sure that your machine and computer are turned on and properly connected to each other. Load the document(s) face up into the ADF. OR 3 4 5 Place a single document face down on the document glass. Open an application, such as PhotoDeluxe or Photoshop. Open the TWAIN window and set the scan options. Scan and save your scanned image. 5 6 NOTE: You need to follow the program’s instructions for acquiring an image. Please refer to the user’s guide of the application. 7 Click Next. Enter a picture name, and select a file format and destination to save the picture. Follow the on-screen instructions to edit the picture after it is copied to your computer. NOTE: If you want to cancel the scan job, press the Cancel button on the Scanner and Camera Wizard. 22 Scanning 7 Using Your Printer in Linux Installing the MFP Driver System Requirements You can use your machine in a Linux environment. Supported OS This chapter includes: • Redhat 7.1 and above • Getting Started • Linux Mandrake 8.0 and above • Installing the MFP Driver • SuSE 7.1 and above • Caldera OpenLinux 3.1 and above • Using the MFP Configurator • Turbo Linux 7.0 and above • Configuring Printer Properties • Slackware 8.1 and above • Printing a Document Recommended Hardware Requirements • Scanning a Document • Pentium IV 1 GHz or higher • RAM 256 MB or higher • HDD 1 GB or higher Getting Started NOTES: • It’s also necessary to claim swap partition of 300 MB or larger for working with large scanned images. • The Linux scanner driver supports the optical resolution at maximum. Please refer to the scanner and copy section of Specifications in your Printer User’s Guide. • You can check your printer name in the supplied CDROM. The supplied CD-ROM provides you with Samsung’s MFP driver package for using your machine with a Linux computer. Samsung’s MFP driver package contains printer and scanner drivers, providing the ability to print documents and scan images. The package also delivers powerful applications for configuring your machine and further processing of the scanned documents. After the driver is installed on your Linux system, the driver package allows you to monitor a number of MFP devices via fast ECP parallel ports and USB simultaneously. The acquired documents can then be edited, printed on the same local MFP or network printers, sent by e-mail, uploaded to an FTP site, or transferred to an external OCR system. Software • Linux Kernel 2.4 or higher • Glibc 2.2 or higher • CUPS • SANE The MFP driver package is supplied with a smart and flexible installation program. You don't need to search for additional components that might be necessary for the MFP software: all required packages will be carried onto your system and installed automatically; this is possible on a wide set of the most popular Linux clones. 23 Using Your Printer in Linux Installing the MFP Driver 1 2 6 When the installation is complete, click Finish. Make sure that you connect your machine to your computer. Turn both the computer and the machine on. When the Administrator Login window appears, type in root in the Login field and enter the system password. NOTE: You must log in as a super user (root) to install the printer software. If you are not a super user, ask your system administrator. 3 Insert the printer software CD-ROM. The CD-ROM will automatically run. If the CD-ROM does not automatically run, click the icon at the bottom of the desktop. When the Terminal screen appears, type in: The installation program has added the MFP Configurator desktop icon and Samsung MFP group to the system menu for your convenience. If you have any difficulties, consult the onscreen help that is available through your system menu or can otherwise be called from the driver package windows applications, such as MFP Configurator or Image Editor. [root@localhost root]#cd /mnt/cdrom/Linux [root@localhost root]#./install.sh NOTE: The installation program runs automatically if you have an autorun software package installed and configured. 4 5 Click Install. When the welcome screen appears, click Next. 24 Using Your Printer in Linux Uninstalling the MFP Driver 1 Using the MFP Configurator When the Administrator Login window appears, type in root in the Login field and enter the system password. MFP Configurator is a tool primarily intended for configuring MFP devices. Since an MFP device combines the printer and scanner, the MFP Configurator provides options logically grouped for printer and scanner functions. There is also a special MFP port option responsible for the regulation of access to an MFP printer and scanner via a single I/O channel. NOTE: You must log in as a super user (root) to install the printer software. If you are not a super user, ask your system administrator. 2 Insert the printer software CD-ROM. The CD-ROM will automatically run. After installing the MFP driver (see page 23), the MFP Configurator icon will automatically be created on your desktop. If the CD-ROM does not automatically run, click the icon at the bottom of the desktop. When the Terminal screen appears, type in: Opening the MFP Configurator 1 [root@localhost root]#cd /mnt/cdrom/Linux [root@localhost root]#./install.sh 2 NOTE: The installation program runs automatically if you Double-click MFP Configurator on the desktop. You can also click the Startup Menu icon and select Samsung MFP and then MFP Configurator. Press each button on the Modules pane to switch to the corresponding configuration window. have an autorun software package installed and configured. 3 4 Printers Configuration button Click Uninstall. Click Next. Scanners Configuration button MFP Ports Configuration button 5 Click Finish. 3 25 Using Your Printer in Linux You can use the onscreen help by clicking Help. After changing the configurations, click Exit to close the MFP Configurator. Printers Configuration Classes Tab Printers configuration has the two tabs; Printers and Classes. The Classes tab shows a list of available printer classes. Printers Tab You can see the current system’s printer configuration by clicking on the printer icon button on the left side of the MFP Configurator window. Shows all of the printer classes. Switches to Printer configuration. Shows all of the installed printer. Shows the status of the class and the number of printers in the class. Shows the status, model name and URI of your printer. • Refresh : Renews the classes list. • Add Class... : Allows you to add a new printer class. You can use the following printer control buttons: • Remove Class : Removes the selected printer class. • Refresh: renews the available printers list. • Add Printer: allows you to add a new printer. Scanners Configuration • Remove Printer: removes the selected printer. In this window, you can monitor the activity of scanner devices, view a list of installed Samsung MFP devices, change device properties, and scan images. • Set as Default: sets the current printer as a default printer. • Stop/Start: stops/starts the printer. • Test: allows you to print a test page to check if the machine is working properly. • Properties: allows you to view and change the printer properties. For details, see page 27. Switches to Scanners configuration. Shows all of the installed scanners. Shows the vendor, model name and type of your scanner. • Properties... : Allows you to change the scan properties and scan a document. See page 29. • Drivers... : Allows you to monitor the activity of the scan drivers. 26 Using Your Printer in Linux MFP Ports Configuration Configuring Printer Properties In this window, you can view the list of available MFP ports, check the status of each port and release a port that is stalled in busy state when its owner is terminated for any reason. Switches to MPF ports configuration. Using the properties window provided by the Printers configuration, you can change the various properties for your machine as a printer. 1 Open the MFP Configurator. 2 3 Shows all of the available ports. If necessary, switch to Printers configuration. Select your machine on the available printers list and click Properties. The Printer Properties window opens. Shows the port type, device connected to the port and status • Refresh : Renews the available ports list. • Release port : Releases the selected port. Sharing Ports Between Printers and Scanners Your machine may be connected to a host computer via the parallel port or USB port. Since the MFP device contains more than one device (printer and scanner), it is necessary to organize proper access of “consumer” applications to these devices via the single I/O port. The Samsung MFP driver package provides an appropriate port sharing mechanism that is used by Samsung printer and scanner drivers. The drivers address their devices via so-called MFP ports. The current status of any MFP port can be viewed via the MFP Ports Configuration. The port sharing prevents you from accessing one functional block of the MFP device, while another block is in use. When you install a new MFP printer onto your system, it is strongly recommended you do this with the assistance of an MFP Configurator. In this case you will be asked to choose I/O port for the new device. This choice will provide the most suitable configuration for MFP’s functionality. For MFP scanners I/O ports are being chosen by scanner drivers automatically, so proper settings are applied by default. 4 27 Using Your Printer in Linux The following five tabs display at the top of the window: •General: allows you to change the printer location and name. The name entered in this tab displays on the printer list in Printers configuration. •Connection: allows you to view or select another port. If you change the printer port from USB to parallel or vice versa while in use, you must re-configure the printer port in this tab. •Driver: allows you to view or select another printer driver. By clicking Options, you can set the default device options. •Jobs: shows the list of print jobs. Click Cancel job to cancel the selected job and select the Show completed jobs check box to see previous jobs on the job list. •Classes: shows the class that your printer is in. Click Add to Class to add your printer to a specific class or click Remove from Class to remove the printer from the selected class. Click OK to apply the changes and close the Printer Properties Window. Printing a Document Printing from Applications There are a lot of Linux applications that you are allowed to print from using Common UNIX Printing System (CUPS). You can print on your machine from any such application. 1 From the application you are using, select Print from the File menu. 2 Select Print directly using lpr. 3 5 In the Samsung LPR window, select the model name of your machine from the Printer list and click Properties. 6 7 Click. The following four tabs display at the top of the window. •General - allows you to change the paper size, the paper type, and the orientation of the documents, enables the duplex feature, adds start and end banners, and changes the number of pages per sheet. •Text - allows you to specify the page margins and set the text options, such as spacing or columns. •Graphics - allows you to set image options that are used when printing images/files, such as color options, image size, or image position. •Device: allows you to set the print resolution, paper source, and destination. Click OK to apply the changes and close the scx6x20 Properties window. Click OK in the Samsung LPR window to start printing. The Printing window appears, allowing you to monitor the status of your print job. To abort the current job, click Cancel. Printing Files You can print many different types of files on the Samsung MFP device using the standard CUPS way - directly from the command line interface. The CUPS lpr utility allows you do that. But the drivers package replaces the standard lpr tool by a much more user-friendly Samsung LPR program. To print any document file: 1 Type lpr from the Linux shell command line and press Enter. The Samsung LPR window appears. 4 Change the printer and print job properties. 2 3 28 Using Your Printer in Linux When you type only lpr and press Enter, the Select file(s) to print window appears first. Just select any files you want to print and click Open. In the Samsung LPR window, select your printer from the list, and change the printer and print job properties. For details about the properties window, see page 28. Click OK to start printing. The document is scanned and the image preview appears in the Preview Pane. Scanning a Document You can scan a document using the MFP Configurator window. 1 Double-click the MFP Configurator on your desktop. 2 3 Click the button to switch to Scanners Configuration. Select the scanner on the list. Drag the pointer to set the image area to be scanned. Click your scanner. 7 When you have only one MFP device and it is connected to the computer and turned on, your scanner appears on the list and is automatically selected. If you want to use one of the preset scan option settings, select from the Job Type drop-down list. For details about the preset Job Type settings, see page 30. If you have two or more scanners attached to your computer, you can select any scanner to work at any time. For example, while acquisition is in progress on the first scanner, you may select the second scanner, set the device options and start the image acquisition simultaneously. 8 9 NOTE: The scanner name shown in Scanners configuration can be different from the device name. 4 5 6 Change the scan options in the Image Quality and Scan Area sections. •Image Quality: allows you to select the color composition and the scan resolution for the image. •Scan Area: allows you to select the page size. The Advanced button enables you to set the page size manually. You can restore the default setting for the scan options by clicking Default. When you have finished, click Scan to start scanning. The status bar appears on the bottom left of the window to show you the progress of the scan. To cancel scanning, click Cancel. The scanned image appears in the new Image Editor window. Click Properties. Load the document to be scanned face up into the ADF (Automatic Document Feeder) or face down on the document glass. Click Preview in the Scanner Properties window. If you want to edit the scanned image, use the toolbar. For further details about editing an image, see page 30. 29 Using Your Printer in Linux 10 When you are finished, click Save on the toolbar. 11 Select the file directory where you want to save the image You can use the following tools to edit the image: Tools and enter the file name. 12 Click Save. Function Saves the image. Adding Job Type Settings You can save your scan option settings to retrieve for a later scanning. Cancels your last action. To save a new Job Type setting: 1 Change the options from the Scanner Properties window. 2 3 4 Restores the action you canceled. Click Save As. Enter the name for your setting. Click OK. Allows you to scroll through the image. Your setting is added to the Saved Settings drop-down list. Crops the selected image area. To save a Job Type setting for the next scan job: 1 Select the setting you want to use from the Job Type dropdown list. 2 Click Save. Zooms the image out. The next time you open the Scanner Properties window, the saved setting is automatically selected for the scan job. Zooms the image in. Allows you to scale the image size; you can enter the size manually, or set the rate to scale proportionally, vertically, or horizontally. To delete a Job Type setting: Select the setting you want to delete from the Job Type drop-down list. 2 Click Delete. 1 The setting is deleted from the list Allows you to rotate the image; you can select the number of degrees from the dropdown list. Using the Image Editor The Image Editor window provides you with menu commands and tools to edit your scanned image. Allows you to flip the image vertically or horizontally. Allows you to adjust the brightness or contrast of the image, or to invert the image. Use these tools to edit the image. Shows the properties of the image. For further details about the Image Editor program, refer to the onscreen help. 30 Using Your Printer in Linux 8 Install the Printer driver Using Your Printer with a Macintosh 1 2 3 Your printer supports Macintosh systems with a built-in USB interface or 10/100 Base-TX network interface card. When you print a file from a Macintosh computer, you can use the CUPS driver by installing the PPD file. 4 5 6 7 8 NOTE: Some printers do not support a network interface. Make sure that your printer supports a network interface by referring to Printer Specifications in your Printer User’s Guide. Make sure that you connect your printer to the computer. Turn on your computer and printer. Insert the CD-ROM which came with your printer into the CD-ROM drive. Double-click CD-ROM icon that appears on your Macintosh desktop. Double-click the MAC_Installer folder. Double-click the MAC_Printer folder. Double-click the Samsung SPL2 Installer icon. Enter the password and click OK. The Samsung SPL Installer window opens. Click Continue and then click Continue. Select Easy Install and click Install. 9 10 After the installation is finished, click Quit. This chapter includes: • Installing Software for Macintosh Uninstalling the Printer driver • Setting Up the Printer Uninstall is required if you are upgrading the software, or if installation fails. 1 Insert the CD-ROM which came with your printer into the CD-ROM drive. 2 Double-click CD-ROM icon that appears on your Macintosh desktop. 3 Double-click the MAC_Installer folder. • Printing • Scanning Installing Software for Macintosh 4 5 6 7 The CD-ROM that came with your printer provides you with the PPD file that allows you to use the CUPS driver or Apple LaserWriter driver (only available when you use a printer which supports the PostScript driver), for printing on a Macintosh computer. 8 9 Also, it provides you with the Twain driver for scanning on a Macintosh computer. Verify the following before you install the printer software: Item Requirements Operating System Mac OS 10.3.x or higher RAM 128 MB Free Disk Space 200 MB 31 Using Your Printer with a Macintosh Double-click the MAC_Printer folder. Double-click the Samsung SPL2 Installer icon. Enter the password and click OK. The Samsung SPL Installer window opens. Click Continue and then click Continue. Select Uninstall and then click Uninstall. When the uninstallation is done, click Quit. Install the Scan driver 1 2 3 Setting Up the Printer Make sure that you connect your printer to the computer. Turn on your computer and printer. Insert the CD-ROM which came with your printer into the CD-ROM drive. Double-click CD-ROM icon that appears on your Macintosh desktop. Double-click the MAC_Installer folder. Set up for your printer will be different depending on which cable you use to connect the printer to your computer—the network cable or the USB cable. 4 5 Double-click the MAC_Twain folder. 6 Double-click the Samsung ScanThru Installer icon. 7 Enter the password and click OK. 8 Click Continue. 9 Click Install. 10 After the installation is finished, click Quit. For a Network-connected Macintosh NOTE: Some printers do not support a network interface. Before connecting your printer, make sure that your printer supports a network interface by referring to Printer Specifications in your Printer User’s Guide. 1 Uninstalling the Scan driver 1 2 3 4 5 6 7 8 9 Insert the CD-ROM which came with your printer into the CD-ROM drive. Double-click CD-ROM icon that appears on your Macintosh desktop. Double-click the MAC_Installer folder. 2 3 4 5 Double-click the MAC_Twain folder. Double-click the Samsung ScanThru Installer icon. 6 Enter the password and click OK. Click Continue. 7 Select Uninstall from the Installation Type and then Click Uninstall. When the uninstallation is done, click Quit. 8 9 Follow the instructions on “Installing Software for Macintosh” on page 31 to install the PPD and Filter files on your computer. Open Print Setup Utility from the Utilities folder. Click Add on the Printer List. Select the IP Printing tab. Enter the printer’s IP address in the Printer Address field. Enter the queue name in the Queue Name field. If you cannot determine the queue name for your printer server, try using the default queue first. Select Samsung in Printer Model and your printer in Model Name. Click Add. Your printer’s IP address appears on the Printer List, and is set as the default printer. For a USB-connected Macintosh 1 2 3 4 5 6 Follow the instructions on “Installing Software for Macintosh” on page 31 to install the PPD and Filter files on your computer. Open Print Setup Utility from the Utilities folder. Click Add on the Printer List. Select the USB tab. Select Samsung in Printer Model and your printer in Model Name. Click Add. Your printer appears on the Printer List, and is set as the default printer. 32 Using Your Printer with a Macintosh Changing Printer Settings Printing You can use advanced printing features when using your printer. From your Macintosh application, select Print from the File menu. The printer name which appears in the printer properties window may differ depending on the printer in use. Except for the name, the composition of the printer properties window is similar. NOTES: • The Macintosh printer’s properties window that appears in this User’s Guide may differ depending on the printer in use. However the composition of the printer properties window is similar. • You can check your printer name in the supplied CDROM. Layout Setting The Layout tab provides options to adjust how the document appears on the printed page. You can print multiple pages on one sheet of paper. Select Layout from the Presets drop-down list to access the following features. For details, see “Printing Multiple Pages on One Sheet of Paper” on the next column. Printing a Document When you print with a Macintosh, you need to check the printer software setting in each application you use. Follow these steps to print from a Macintosh. 1 2 3 Open a Macintosh application and select the file you want to print. Open the File menu and click Page Setup (Document Setup in some applications). Choose your paper size, orientation, scaling, and other options and click OK. Make sure that your printer is selected. ▲ Mac OS 10.3 ▲ Mac OS 10.3 4 5 6 Open the File menu and click Print. Choose the number of copies you want and indicate which pages you want to print. Click Print when you finish setting the options. 33 Printing Multiple Pages on One Sheet of Paper Printer Features Setting The Printer Features tab provides options for selecting the paper type and adjusting print quality. You can print more than one page on a single sheet of paper. This feature provides a cost-effective way to print draft pages. Select Printer Features from the Presets drop-down list to access the following features: 1 2 From your Macintosh application, select Print from the File menu. Select Layout. ▲ Mac OS 10.3 Paper Type Make sure that Paper Type is set to Printer Default. If you load a different type of print material, select the corresponding paper type. Resolution(Quality) The Resolution options you can select may vary depending on your printer model. You can select the printing resolution. The higher the setting, the sharper the clarity of printed characters and graphics. The higher setting also may increase the time it takes to print a document. ▲ Mac OS 10.3 3 4 5 34 Select the number of pages you want to print on one sheet of paper on the Pages per Sheet drop-down list. Select the page order from the Layout Direction option. To print a border around each page on the sheet, select the option you want from the Border drop-down list. Click Print, and the printer prints the selected number of pages on one side of each page. Scanning If you want to scan documents using other software, you will need to use TWAIN-compliant software, such as Adobe PhotoDeluxe or Adobe Photoshop. The first time you scan with your machine, select it as your TWAIN source in the application you use. The basic scanning process involves a number of steps: • Place your photograph or page on the document glass or ADF. • Open an application, such as PhotoDeluxe or Photoshop. • Open the TWAIN window and set the scan options. • Scan and save your scanned image. NOTE: You need to follow the program’s instructions for acquiring an image. Please refer to the User’s Guide of the application. 35 SOFTWARE SECTION INDEX A L advanced printing, use 13 Layout properties, set Macintosh 33 Windows 8 Linux driver, install 24 printer properties 27 printing 28 scanning 29 C canceling scan 22 D document, print Macintosh 33 Windows 7 E Extras properties, set 11 F favorites settings, use 12 G Graphics properties, set 10 H help, use 12 I install printer driver Macintosh 31 Windows 4 installing Linux software 23 M Macintosh driver install 31 uninstall 31 printing 33 scanning 35 setting up the printer 32 MFP driver, install Linux 24 N n-up printing Macintosh 34 Windows 13 O orientation, print 28 Windows 8 overlay create 16 delete 16 print 16 paper type, set Macintosh 34 print 28 Windows 9 poster, print 14 print document 7 fit to page 14 from Macintosh 33 from Windows 7 N-up Macintosh 34 Windows 13 overlay 16 poster 15 scaling 14 watermark 15 print resolution 28 printer driver, install Linux 24 printer properties Linux 28 printer properties, set Macintosh 33 Windows 8 printer resolution, set Macintosh 34 Windows 10 printer software install Macintosh 31 Windows 4 uninstall Macintosh 31 Windows 6 printing from Linux 28 R P Paper properties, set 9 paper size, set 9 print 28 paper source, set 28 Windows 9 36 resolution printing 28 S scanning Linux 29 SmarThru 20 TWAIN 22 WIA driver 22 scanning from Macintosh 35 setting darkness 10 favorites 12 image mode 10 resolution Macintosh 34 Windows 10 toner save 10 true-type option 10 software install Macintosh 31 Windows 4 reinstall Windows 6 system requirements Macintosh 31 uninstall Macintosh 31 Windows 6 status monitor, use 18 system requirements Linux 23 Macintosh 31 T toner save, set 10 TWAIN, scan 22 U uninstall, software Macintosh 31 Windows 6 uninstalling MFP driver Linux 25 W watermark create 15 delete 15 edit 15 print 15 WIA, scan 22 37 www.samsungprinter.com Rev. 2.00
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2007:09:06 16:57:20-07:00 Create Date : 2005:12:13 10:16:39Z Page Count : 92 Creation Date : 2005:12:13 10:16:39Z Mod Date : 2007:09:06 16:57:20-07:00 Producer : Acrobat Distiller 5.0.5 (Windows) Author : Owner Metadata Date : 2007:09:06 16:57:20-07:00 Creator : Owner Title : 4200_EN.book Page Mode : UseOutlines Page Layout : SinglePageEXIF Metadata provided by EXIF.tools