Samsung (14.15 MB) DE68 04108A 01 SMH1927 XAA EN 120725

User Manual: Samsung (14.15 MB) Samsung SMH1927B/XAA Installation Manual | Manual Device

Open the PDF directly: View PDF .
Page Count: 20

Download
Open PDF In Browser	View PDF

Installation Instructions
Over The Range Microwave Oven
BEFORE YOU BEGIN (Read these instructions completely and carefully.)
IMPORTANT

Save these instructions for local inspector’s use.

IMPORTANT

Observe all governing codes and ordinances.

• Note to Installer

- Be sure to leave these instructions with the Consumer.

• Note to Consumer

- Keep these instructions for future reference.

• Skill level

- Installation of this appliance requires basic mechanical and electrical
skills.

• Proper installation is the responsibility of the installer.
• Product failure due to improper installation is not covered under the Warranty.

READ CAREFULLY. KEEP THESE INSTRUCTIONS.

This manual is made with 100% recycled paper.

SMH1927_XAA_DE68-04108A-01_EN_120725.indd 1

2012-07-25 �� 7:54:27

Contents
General information

Step-by-step installation guide

Important safety instructions . . . . . . . . 3

1. Placement of the mounting plate . . . . 8

Electrical requirements . . . . . . . . . . . 3

A. Removing the microwave oven from the
carton/Removing the mounting plate . . 8

Hood exhaust . . . . . . . . . . . . . . . . 4

B. Finding the wall studs . . . . . . . . . . . 8

Damage - Shipment/Installation . . . . . . 6

C. Determining wall plate location under your
cabinet . . . . . . . . . . . . . . . . . . 9

Parts included . . . . . . . . . . . . . . . . 6

D. Aligning the wall plate . . . . . . . . . . 10

Tools you will need . . . . . . . . . . . . . . 7

2. Ventilation types (choose a, b or c) . .

Mounting space . . . . . . . . . . . . . . . 7

T
o
co
b
o
g
el
R
em

A. Outside top exhaust (vertical duct) . . . 12
A1. Installation procedure for exhaust
adaptor and proper damper operation
check . . . . . . . . . . . . . . . . . 12
A2. Adjust the exhaust adaptor . . . . . 12
B. Recirculating (non-vented ductless) . . . 12
B1. Adapting the microwave blower for
recirculation . . . . . . . . . . . . . 12
B2. Installing the charcoal filter . . . . . 13
C. Outside back exhaust (horizontal duct) . 14
C1. Adapting the microwave blower for
outside back exhaust . . . . . . . . 14

3. Installation . . . . . . . . . . . . . . . . 15
A. Preparing the rear wall for outside back
exhaust . . . . . . . . . . . . . . . . . . 15
B. Attach the mounting plate to the wall . . 15
C. Use the top cabinet template to prepare
the top cabinet . . . . . . . . . . . . . . 16
D. Mount the microwave oven . . . . . . . 16
E. Connecting ductwork for outside top
exhaust . . . . . . . . . . . . . . . . . . 17

4. Before you use your microwave . . . . 18

2
SMH1927_XAA_DE68-04108A-01_EN_120725.indd 2

2012-07-25 �� 7:54:27

C
su
c
o
lo
1

C
c
su
m

N
I
sa
g
inb

IM
F
M
S

2
2

General information
Important safety instructions
This product requires a three-prong grounded
outlet. The installer must perform a ground
continuity check on the power outlet box before
beginning the installation to insure that the
outlet box is properly grounded. If not properly
grounded, or if the outlet box does not meet
electrical requirements noted (under ELECTRICAL
REQUIREMENTS), a qualified electrician should be
employed to correct any deficiencies.

Insure
proper
Insure
proper
ground
exists
ground
exists
before
use.
before use

CAUTION: For personal
safety, remove house
fuse or open circuit
breaker before
beginning installation
to avoid severe or fatal
shock injury.

You should have the wall receptacle and circuit
checked by a qualified electrician to make sure
the receptacle is properly grounded.
If you have a standard two-prong wall
receptacle, it is very important to have it
replaced with a properly grounded threeprong wall receptacle, installed by a qualified
electrician.

2
3

The power cord of this
appliance is equipped
with a three-prong
(grounding) plug which
mates with a standard
three-prong (grounding)
wall receptacle to
minimize the possibility
of electric shock hazard
from this appliance.

CAUTION: For personal safety, the mounting
surface must be capable of supporting the
cabinet load, in addition to the added weight
of this 69 pound product, plus additional oven
loads of up to 50 pounds or a total weight of
109 pounds.

DO NOT, UNDER ANY CIRCUMSTANCES, CUT,
DEFORM OR REMOVE ANY OF THE PRONGS
FROM THE POWER CORD. DO NOT USE WITH
AN EXTENSION CORD.

CAUTION: For personal safety, this product
cannot be installed in cabinet arrangements
such as an island or a peninsula. It must be
mounted to BOTH a top cabinet AND a wall.

Electrical
requirements

NOTE: For easier installation and personal
Insure proper
safety,
it is recommended that two people
ground exists
install
this product.
before use

Product rating is 120 volts AC, 60 Hertz, 14.5
amps and 1.7 kilowatts.This product must be
connected to a supply circuit of the proper voltage
and frequency. Wire size must conform to the
requirements of the National Electrical Code or the
prevailing local code for this kilowatt rating. The
power supply cord and plug should be brought to a
separate 15 ampere branch circuit single grounded
outlet. The outlet box should be located in the
cabinet above the microwave oven. The outlet box
and supply circuit should be installed by a qualified
electrician and conform to the National Electrical
Code or the prevailing local code.

IMPORTANT – PLEASE READ CAREFULLY.
FOR PERSONAL SAFETY, THIS APPLIANCE
MUST BE PROPERLY GROUNDED TO AVOID
SEVERE OR FATAL SHOCK.

3
SMH1927_XAA_DE68-04108A-01_EN_120725.indd 3

2012-07-25 �� 7:54:28

General information
Hood exhaust
NOTE: Read these next two pages only if you plan to vent your exhaust to the outside. If you plan to
recirculate the air back into the room, proceed to page 11.

N
d
ro

O
R

OUTSIDE TOP EXHAUST (EXAMPLE ONLY)
The following chart contains an example of one possible ductwork installation.
DUCT PIECES

EQUIVALENT
LENGTH

NUMBER
USED

EQUIVALENT
LENGTH

Roof Cap

24 ft.

(1)

24 ft.

N
th
p
he
sw

T
st
12 Ft. Straight Duct
(6˝ Round)

12 ft.

(1)

12 ft.

Rectangular-toRound Transition
Adaptor*

5 ft.

(1)

5 ft.

Total Length

41 ft.

Equivalent lengths of duct pieces are based on actual tests
and reflect requirements for good venting performance with
any vent hood.

* IMPORTANT: If a rectangular-to-round transition adaptor is used, the bottom corners of the damper will have to be
cut to fit, using the tin snips, in order to allow free movement of the damper.

OUTSIDE BACK EXHAUST (EXAMPLE ONLY)
The following chart contains an example of one possible ductwork installation.
EQUIVALENT
LENGTH

NUMBER
USED

EQUIVALENT
LENGTH

Wall Cap

40 ft.

(1)

40 ft.

3 Ft. Straight Duct (3 ¼˝
x 10˝ Rectangular)

3 ft.

(1)

3 ft.

90 ° Elbow

10 ft.

(2)

20 ft.

Total Length

63 ft.

DUCT PIECES

Equivalent lengths of duct pieces are based on actual tests
and reflect requirements for good venting performance with
any vent hood.

NOTE: For back exhaust, care should be taken to align the exhaust with the space between studs, or the wall should
be prepared at the time it is constructed by leaving enough space between the wall studs to accommodate exhaust.

4
SMH1927_XAA_DE68-04108A-01_EN_120725.indd 4

2012-07-25 �� 7:54:28

If
tr
th

General information
For satisfactory air movement, the total duct length of
3 ¼˝ x 10˝ rectangular or 6˝ diameter round duct should
not exceed 140 equivalent feet.

Outside ventilation requires a HOOD EXHAUST DUCT.
Read the following carefully.

Elbows, transitions, wall and roof
caps, etc., present additional resistance to airflow

NOTE: It is important that venting be installed using
the most direct route and with as few elbows as
possible. This ensures clear venting of exhaust and
helps prevent blockages. Also, make sure dampers
swing freely and nothing is blocking the ducts.

and are equivalent to a section of straight duct which is
longer than their actual physical size. When calculating
the total duct length, add the equivalent lengths of all
transitions and adaptors plus the length of all straight
duct sections. The chart below shows you how to
calculate total equivalent ductwork length using the
equivalent length in feet of some typical ducts.

Exhaust connection:
The hood exhaust has been designed to mate with a
standard 3 ¼˝ x 10˝ rectangular duct.
If a round duct is required, a rectangular-to-round
transition adaptor must be used. Do not use less
than a 6˝ diameter duct.

EQUIVALENT
LENGTH

Rectangular-to-Round
Transition Adaptor*

5 ft.

(

)

ft.

Wall Cap

40 ft.

(

)

ft.

90 ° Elbow

10 ft.

(

)

ft.

45 ° Elbow

5 ft.

(

)

ft.

90 ° Elbow

25 ft.

(

)

ft.

45 ° Elbow

5 ft.

(

)

ft.

Roof Cap

24 ft.

(

)

ft.

Straight Duct 6˝ Round or 3 ¼˝
x 10˝ Rectangular

1 ft.

(

)

ft.

DUCT PIECES

d
.

Maximum duct length:

NOTE: If you need to install ducts, note that the total
duct length of 3 ¼˝ x 10˝ rectangular or 6˝ diameter
round duct should not exceed 140 equivalent feet.

NUMBER
USED

Total Ductwork
*

IMPORTANT: If a rectangular-to-round
transition adaptor is used, the bottom
corners of the damper will have to be cut
to fit, using tin snips, in order to allow free
movement of the damper.

EQUIVALENT
LENGTH

Equivalent lengths of duct pieces
are based on actual tests and reflect
the requirements for good venting
performance with any vent hood.

5
SMH1927_XAA_DE68-04108A-01_EN_120725.indd 5

2012-07-25 �� 7:54:28

General information
Damage - Shipment/Installation

Tools you will need

•

If the unit is damaged in shipment, return the unit to the store in which it was bought for repair or
replacement.

•

If the unit is damaged by the customer, repair or replacement is the responsibility of the customer.

•

If the unit is damaged by the installer (if other than the customer), repair or replacement must be made by
arrangement between the customer and installer.

Parts included
HARDWARE PACKET
PART

ADDITIONAL
PARTS
late
emp
T

QUANTITY

Wood Screws
(¼˝ x 2˝)

Toggle Bolts
(and wing nuts)
(3/16˝ x 3˝)

Self-aligning
Machine Screws
(¼˝ - 28 x 3 ¼˝)

PART
TOP CABINET TEMPLATE
TOP CABINET
TEMPLATE
ION
LLAT
S
INSTA UCTION
STRWALL TEMPLATE
REAR
IN
REAR WALL TEMPLATE

You will find the installation hardware contained in a
packet with the unit. Check to make sure you have all
these parts.

QUANTITY

Top Cabinet
Template

Rear Wall Template

Installation
Instructions

One Touch Easy
Grease Filter

1
(Installed)

Exhaust adaptor

NOTE: Some extra parts are included.
late
Temp
late
Template
Temp

ION
LLAT NNS
IO
INSTA UAT
CTIO
NNS
TRLL IO
INSSTA
IN
CTIONS
UAT
TARLL
IN
INSSTRUCTIO
INST

6
SMH1927_XAA_DE68-04108A-01_EN_120725.indd 6

2012-07-25 �� 7:54:29

Mounting space

General information
Tools you will need

# 1 and #2 Phillips
screwdriver

Pencil

Ruler or tape measure and
straight edge

Carpenter square (optional)

Tin snips (for cutting
damper, if required)

Scissors (to cut
template, if necessary)

Electric drill with 3/16˝, ½˝ and
⅝˝ drill bits

Filler blocks or scrap wood
pieces, if needed for top
cabinet spacing (used on
recessed bottom cabinet
installations only)

Gloves

Saw (saber, hole or
keyhole)

Stud finder or Hammer
(optional)

Safety goggles

Level

Duct and masking tape

Mounting space
12˝ max.

Bottom edge of the
cabinet needs to be 30˝
or more from the cooking
surface.

16 ½˝
30˝
5˝

30˝ min.
Backsplash

NOTES:
•

The space between the cabinets must be 30˝ wide and
free of obstructions.

•

This microwave oven is for installation over ranges up
to 36˝ wide.

•

If you are going to vent your microwave oven to the
outside, see the Hood Exhaust Section for exhaust
duct preparation.

•

If installing the microwave oven beneath smooth
flat cabinets, be careful to follow the instructions
on the top cabinet template for power cord
clearance.

•

Maximum cabinet depth above and beside the
unit is 12˝.

•

The dimensions provided are the minimum
required for mounting the microwave oven. Local
codes and the practical use of the range will
likely require you to provide more than the 13.5˝
shown between the range and the bottom of the
microwave.

7
SMH1927_XAA_DE68-04108A-01_EN_120725.indd 7

2012-07-25 �� 7:54:30

Step-by-step installation guide
1. Placement of the mounting plate
A. Removing the
microwave oven from
the carton/Removing
the mounting plate

B. Finding the wall studs

Wall
WallStuds
Studs

1. Remove the installation instructions, Exhaust
adaptor, filters, glass tray, and the small
hardware bag. Do not remove the Styrofoam
protecting the front of the oven.

Center
Center

2. Fold back all 4 carton flaps fully against carton
sides. Then carefully roll the oven and carton
over onto the top side. The oven should be
resting in the Styrofoam.

1. Find the studs using one of the following
methods:
A. Stud finder–a magnetic device which locates
nails.

Carton
Carton

OR
B. Use a hammer to tap lightly across the
mounting surface to find a solid sound. This
will indicate a stud location.

Styrofoam
Styrofoam

2. After locating the stud(s), find the stud’s center
by probing the wall with a small nail to find the
edges of the stud. Then, place a mark halfway
between the edges. The center of any adjacent
studs should be 16˝ or 24˝ from this mark.

3. Pull the carton up and off the oven.
4. Remove and properly discard plastic bags.
Screws
Screws

Screws
Screws

3. Draw a line down the center of the studs.

Mounting Plate
Mounting
Plate

THE MICROWAVE MUST BE CONNECTED TO
AT LEAST ONE WALL STUD.

5. Remove the 2 screws from the mounting plate.
This plate will be used as the rear wall template
and for mounting.
NOTE: You will have to reuse two screws in original
loction of outcase after removing mounting plate.

8
SMH1927_XAA_DE68-04108A-01_EN_120725.indd 8

2012-07-25 �� 7:54:31

P
P
fc

Step-by-step installation guide
C. Determining wall plate location under your cabinet
Plate position – beneath flat bottom cabinet.

Plate position – beneath framed recessed cabinet
bottom.

16 ½˝

CL
At least 30˝

Draw a vertical line on the
wall at the center of the 30˝
wide space. Tape the Rear
Wall Template onto the wall
so that the top of the template
touches the bottom of the
cabinet and the centerline on
the template lines up with the
line you drew on the wall.

Your cabinets may have decorative trim that interferes
with the microwave installation. Remove the decorative
trim to install the microwave properly and to make it
level.

Plate
– beneath
recessed
bottombottom
cabinet with
Plateposition
position
– beneath
recessed
front
overhang.
cabinet
with front overhang
Draw
Draw aa horizontal
line on theline to
mark how far the inside
back wall equal to the
of the front overhang
depth of the front
descends below the
overhang.
cabinet.

THE MICROWAVE MUST BE LEVEL.
Use a level to make sure the cabinet bottom is level.

30˝ to Cooktop

Draw a vertical line on the wall at the center of the 30˝ wide
space. Tape the Rear Wall Template onto the wall so that the
top of the template touches the bottom of the cabinet frame
and the centerline on the template lines up with the line you
drew on the wall.

Draw a vertical line on the wall at the center of the 30˝
wide space. Draw a second, horizontal line on the wall
below the cabinet to mark how far the inside of the
front overhang descends below the cabinet. Tape the
Rear Wall Template onto the wall so that the top of the
template touches the bottom of the horizontal line and
the centerline on the template lines up with the vertical
line.

30˝30"
to to
Cooktop
Cooktop

9
SMH1927_XAA_DE68-04108A-01_EN_120725.indd 9

2012-07-25 �� 7:54:32

Step-by-step installation guide
2.

D. Aligning the wall plate

T
th

Hole
HoleAA

Centerline
Centerline
notches
notches

Draw
Horizontal
Draw a Vertical
Lineline on
on Wall
Center
the
wall from
along
the bottom
of Top Cabinet
of “Rear Wall Template”.

Horizontal
HorizontalLine
Line

Area E
Area

Line
Hole B Horizontal
Horizontal Line
Draw aaHorizontal
lineline
on wall
from from
bottom of “Rear
Draw
Horizontal
on wall
Wall Template”.
bottom
of “Rear Wall Template”.

CAUTION: Wear gloves to avoid cutting
fingersWear
on sharp
edges.
CAUTION:
gloves
to avoid cutting fingers

on sharp edges.
1.

Draw a Horizontal line on the wall at the
bottom of the “Rear Wall Template”.

Drill ⅝˝ holes for toggle bolts in 3 locations
(Hole A, Hole B, Hole C) as shown in the
illustration above. If the location of a hole
lines up with a stud, drill a 3/16˝ hole for a
wood screw. You cannot use a toggle bolt to
attach the wall plate to a stud.

Holes A, B and C are inside area E. If none
of these holes line up with a stud, find a stud
in area E that lines up with a hole circle in
Area E, and then drill a 3/16˝ hole into it for
a wood screw. You must have at least one
wood screw mounted firmly into a stud to
support the weight of the microwave. Set
the mounting plate aside.

NOTE: DO NOT MOUNT THE PLATE AT
THIS TIME.

10
SMH1927_XAA_DE68-04108A-01_EN_120725.indd 10

2012-07-25 �� 7:54:33

Step-by-step installation guide
2. Ventilation types (choose a, b or c)
NOTE: This microwave is shipped assembled
for Outside Top Exhaust (except for non-vented
models). An exhaust adaptor is shipped assembled
and attached to the filler-upper. Select the type of
ventilation required for your installation and proceed to
that section.

This microwave oven is compatible with the following
three types of ventilation:
A. Outside Top Exhaust (Vertical Duct)
B. Recirculating (Non-Vented Ductless)
C. Outside Back Exhaust (Horizontal Duct)

A. Outside top exhaust
(vertical duct)

B. Recirculating (nonvented ductless)

Adaptor
AdaptorininPlace
Place
for Outside Top
for Outside
Exhaust

Top Exhaust

See page 12

See page 13
A Charcoal Filter Accessory Kit is required for the
nonvented exhaust. (See your Owner’s Manual for the
kit number.)

C. Outside back exhaust
(horizontal duct)

See page 14

11
SMH1927_XAA_DE68-04108A-01_EN_120725.indd 11

2012-07-25 �� 7:54:33

Step-by-step installation guide
A. Outside top exhaust
(vertical duct)

NOTE: You must attach the house duct to the
exhaust adaptor after installation is complete.

House Duct
House
Duct

A1. Installation procedure for
THE exhaust adaptor and
proper damper operation
check

C
bl
of
pl

The exhaust Adaptor and Damper are
shipped assembled and attached to
the filler-upper.

B. Recirculating (non-vented
ductless)

1. Slide the exhaust adaptor as shown in the
diagram above.
2. Make sure the tape securing the damper is
removed and damper pivots easily before you
mount the microwave.

B1. Adapting the microwave
blower for recirculation

CAUTION: You will need to make adjustments to
assure proper alignment with your house exhaust
duct after the microwave is installed.

1. Remove and save the screws
that hold the blower plate to the
microwave.

A2. Adjust the exhaust adaptor
After you have installed the microwave, you will
need to open the top cabinet and adjust the exhaust
adaptor so that you can connect it to the house
duct.
Blower Plate

Damper

Back of
Microwave

2. Lift up the
blower plate.

Back of
Microwave

NOTE: The exhaust adaptor with the damper is not
needed for recirculating models. You may want to
save them for possible future use.

For Front-to-Back
Adjustment, Slide the
Exhaust Adaptor as Needed

12
SMH1927_XAA_DE68-04108A-01_EN_120725.indd 12

2012-07-25 �� 7:54:33

vented

Step-by-step installation guide
3.

Remove the screw that holds the blower motor
and carefully pull out the blower unit. The wires
will extend far enough to allow you to adjust the
blower unit.

Place the blower unit back into the opening.

CAUTION: Do not pull or stretch the blower unit
wiring. Make sure the wires are not pinched.
6.

blower mortor screw

CAUTION: To avoid breaking or cracking the blower
blade, do not touch the blade. Hold the outer case
of the blower when you pull it out or put it back in
place.
4.

Secure the blower unit to the microwave with the
screw.

B2. Installing the charcoal
filter

Roll the blower unit 90 ° so that the fan blade
openings are facing toward the front of the
microwave.
Before Roll

Remove the screws on the top of the grill using a
#1 Phillips screwdriver.

Open the door.

Remove the grill.

•

Push the grill left, and then pull the grill straight
off.
Charcoal filter

Back of
Microwave

After Roll

Install the charocal filter. When properly installed,
the wire mesh of the filter should be visible from
the front.

Reinstall the grille and the screws.

Close the door.

Back of
Microwave

Insert mesh-side up

13
SMH1927_XAA_DE68-04108A-01_EN_120725.indd 13

2012-07-25 �� 7:54:34

Step-by-step installation guide
3.

C. Outside back exhaust (horizontal duct)
C1. Adapting the microwave
blower for outside back
exhaust

5. Rotate the blower unit counterclockwise 180 °.
Before Rotation

After Rotation

1. Remove and save the screws that hold the
Blower Plate to the microwave.
Screw

Lift up the
Blower plate.

Back of Microwave

Blower Motor

6. Place the blower unit back into the opening.

Back of Microwave

AFTER: Fan Blade Openings
Facing Back

Blower Plate Screw

End A

3. Carefully pull out the blower unit. The wires will
extend far enough to allow you to adjust the
blower unit.

End B

Yo
o

BEFORE: Fan Blade
Openings Facing Forward
End B

CAUTION: Do not pull or stretch the blower
unit wiring. Make sure the wires are not
pinched.

End A

NOTE: The blower unit exhaust openings
should match exhaust openings on the rear of
microwave oven.

CAUTION: To avoid breaking or cracking the blower
blade, do not touch the blade. Hold the outer case
of the blower when you pull it out or put it back in
place.

7. Close the Blower Plate and attach the exhaust
adaptor to the rear of the oven by sliding it into
the guides at the back top center of the oven.
Push in securely until it is in the lower locking
tabs. Take care to ensure that the damper hinge
is installed so that it is at the top and that the
damper swings freely.

4. Remove Parts “A” with tin snips or pliers.

•

Adaptor

•
Back of
Microwave

Parts “A”

•

Guide
Locking Tabs
Guide

From Blower motor screw
(after attached the exhaust adaptor)

14
SMH1927_XAA_DE68-04108A-01_EN_120725.indd 14

2012-07-25 �� 7:54:35

C
yo
no

Step-by-step installation guide
3. Installation
INSTALLATION OVERVIEW
A. Prepare Rear Wall (horizontal duct only)
B. Attach Mounting Plate to Wall
C. Prepare Top Cabinet
D. Mount the Microwave Oven
E. Connecting Ductwork (vertical duct only)

A. Preparing the rear
wall for outside back
exhaust

B. Attach the mounting
plate to the wall

You need to cut an opening in the rear wall for
outside exhaust.

Attach the plate to the wall using toggle bolts. At
least one wood screw must be used to attach the
plate to a wall stud.
1. Remove the toggle wings from the bolts.

2. Insert the bolts into the mounting plate through
the holes designated to go into drywall, and
then reattach the toggle wings so that ¾˝ of the
bolt protrudes beyond the wing.

•

Read the instructions for outside back exhaust
on the REAR WALL TEMPLATE.

•

Tape the REAR WALL TEMPLATE to the rear
wall.

•

Cut the opening, following the instructions on
the REAR WALL TEMPLATE.

CAUTION: Do not cut an opening in the rear wall if
you are installing the microwave with vertical duct or
non-vented ductless ventilation.

15
SMH1927_XAA_DE68-04108A-01_EN_120725.indd 15

2012-07-25 �� 7:54:35

Step-by-step installation guide
D. Mount the microwave
oven

To use toggle bolts:
Spacing
forToggles
Toggles
More
Spacing for
More
Than
Wall Thickness
Thickness
Than Wall
Mounting
Mounting
Plate
Plate

Toggle Wings
Toggle
Wings
Toggle
Toggle
Bolt
Bolt

Wall
Wall

Bolt End
Bolt

FOR EASIER INSTALLATION AND PERSONAL
SAFETY, WE RECOMMEND THAT TWO PEOPLE
INSTALL THIS MICROWAVE OVEN.

Place the mounting plate against the wall and
insert the toggle wings into the holes in the wall to
mount the plate.

IMPORTANT: Do not grip or use the handle
during installation.

NOTE: Before tightening the toggle bolts and wood
screw, make sure the bottom of the Mounting plate
runs along the bottom Horizontal line of the “Rear wall
Template” and the Mounting plate is properly centered
under the cabinet.

NOTE: If your cabinet is metal, use the nylon
grommet in the power cord hole to prevent the cord
from being cut.
NOTE: Filler blocks are required when mounting this
unit under any cabinet with a recessed bottom or
front overhang. (See page 9.)

CAUTION: Be careful to avoid pinching your fingers
between the back of the mounting plate and the wall.
4.

Tighten all bolts. Pull the plate away from the wall
to help tighten the bolts. Tighten the screw.

IMPORTANT: The case damage that will occur
from over tightening screws if you do not use
filler blocks is not covered under warranty.

C. Use the top cabinet
template to prepare
the top cabinet

IMPORTANT: For models with the grease filter
installed, don’t push up on the filter when you
mount the oven.

You need to drill holes for the top support screws and
a hole large enough for the power cord to fit through.

Grease Filter

•

Read the instructions on the TOP CABINET
TEMPLATE.

•

Tape it underneath the top cabinet.

•

Drill the holes, following the instructions on the
TOP CABINET TEMPLATE.

CAUTION: Wear safety goggles when drilling holes in
the cabinet bottom.

Grease Filter

NOTE: When mounting the microwave oven, thread
the power cord through hole in the bottom of the top
cabinet. Keep it tight throughout Steps 1–3. Do not
pinch the cord or lift the oven by pulling cord.

16
SMH1927_XAA_DE68-04108A-01_EN_120725.indd 16

2012-07-25 �� 7:54:36

Step-by-step installation guide
6.
1.

Lift the microwave, tilt
it forward, and hook
the slots at the back
bottom edge onto the
four lower tabs of the
mounting plate.

Install the grease filters. See the Owner’s Manual
packed with the microwave for instructions.

NOTE: For models with installed grease filters, you
do not need to install a filter.

Rotate the front of
the oven up against
the cabinet bottom.

E. Connecting ductwork
for outside top
exhaust

Insert a self-aligning screw through the top
center cabinet hole. Temporarily secure the oven
by turning the screw at least two full turns after
the threads have engaged. (It will be completely
tightened later.) Be sure to keep the power
cord tight. Be careful not to pinch the cord,
especially when mounting flush to the
bottom of cabinet.

House Duct
House
Duct

CabinetFront
Front
Cabinet
Cabinet
Bottom
Shelf
Cabinet Bottom
Shelf
Filler Block
Filler
Block

Equivalent
Equivalentto
Depth
of of
to Depth
Cabinet
CabinetRecess
Recess

Extend the house duct down to connect to the
exhaust adaptor.

Seal the exhaust duct joints using duct tape.

Self-Aligning Screw
Self-Aligning
Screw
MicrowaveOven
Oven Top
Top
Microwave

Attach the microwave oven to the top cabinet.

Insert the 2 self-aligning screws through the
cabinet bottom shelf and filler block into the
outer top cabinet of the unit. Continue to
support the unit until both screws are inserted
and engaged at least two full turns, then fully
tighten both screws until the unit is secure.

d
p

17
SMH1927_XAA_DE68-04108A-01_EN_120725.indd 17

2012-07-25 �� 7:54:37

Before You Use Your Microwave
4. Before you use your microwave
1.

Make sure the microwave oven has been
installed according to instructions.

Remove all packing material from the
microwave oven.

Install the turntable and ring in cavity.

Replace the house fuse or turn the breaker
back on.

Plug the power cord into a dedicated 15 amp
electrical outlet.

Read the Owner’s Manual.

Keep installation instructions for the local
inspector’s use.

Insureproper
proper
Insure
ground
groundexists
exists
before
use.
before use

18
SMH1927_XAA_DE68-04108A-01_EN_120725.indd 18

2012-07-25 �� 7:54:37

Note

19
SMH1927_XAA_DE68-04108A-01_EN_120725.indd 19

2012-07-25 �� 7:54:37

Code No.: DE68-04108A-01

SMH1927_XAA_DE68-04108A-01_EN_120725.indd 20

2012-07-25 �� 7:54:37

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Create Date                     : 2012:07:25 19:54:27+09:00
Creator                         : Adobe InDesign CS4 (6.0)
Modify Date                     : 2013:03:18 19:05:29+09:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2013:03:18 19:05:29+09:00
Creator Tool                    : Adobe InDesign CS4 (6.0)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 12085 bytes, use -b option to extract)
Instance ID                     : uuid:193cfb93-d665-48e6-9335-a241d4afe1da
Document ID                     : xmp.did:59C25B85E455E111AD2DC2EBB5E4F15B
Original Document ID            : adobe:docid:indd:d08821f6-c595-11dd-8bb2-e7b39da9853f
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:58C25B85E455E111AD2DC2EBB5E4F15B
Derived From Document ID        : xmp.did:79ABCC88A940E11191CFEDFA1228D17E
Derived From Original Document ID: adobe:docid:indd:d08821f6-c595-11dd-8bb2-e7b39da9853f
Derived From Rendition Class    : default
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:4C05E06C5675E0119E56CAC70E7E7654, xmp.iid:4D05E06C5675E0119E56CAC70E7E7654, xmp.iid:4E05E06C5675E0119E56CAC70E7E7654, xmp.iid:4F05E06C5675E0119E56CAC70E7E7654, xmp.iid:B587835F807BE011AB9EF64DB23210E4, xmp.iid:B687835F807BE011AB9EF64DB23210E4, xmp.iid:B787835F807BE011AB9EF64DB23210E4, xmp.iid:B887835F807BE011AB9EF64DB23210E4, xmp.iid:B987835F807BE011AB9EF64DB23210E4, xmp.iid:BA87835F807BE011AB9EF64DB23210E4, xmp.iid:BB87835F807BE011AB9EF64DB23210E4, xmp.iid:BD87835F807BE011AB9EF64DB23210E4, xmp.iid:CC53733F937BE011AB9EF64DB23210E4, xmp.iid:CD53733F937BE011AB9EF64DB23210E4, xmp.iid:CE53733F937BE011AB9EF64DB23210E4, xmp.iid:CF53733F937BE011AB9EF64DB23210E4, xmp.iid:D053733F937BE011AB9EF64DB23210E4, xmp.iid:D153733F937BE011AB9EF64DB23210E4, xmp.iid:D253733F937BE011AB9EF64DB23210E4, xmp.iid:D353733F937BE011AB9EF64DB23210E4, xmp.iid:D453733F937BE011AB9EF64DB23210E4, xmp.iid:D553733F937BE011AB9EF64DB23210E4, xmp.iid:D653733F937BE011AB9EF64DB23210E4, xmp.iid:3C9D7B979D7BE011AB9EF64DB23210E4, xmp.iid:3D9D7B979D7BE011AB9EF64DB23210E4, xmp.iid:3F9D7B979D7BE011AB9EF64DB23210E4, xmp.iid:409D7B979D7BE011AB9EF64DB23210E4, xmp.iid:419D7B979D7BE011AB9EF64DB23210E4, xmp.iid:429D7B979D7BE011AB9EF64DB23210E4, xmp.iid:439D7B979D7BE011AB9EF64DB23210E4, xmp.iid:449D7B979D7BE011AB9EF64DB23210E4, xmp.iid:459D7B979D7BE011AB9EF64DB23210E4, xmp.iid:469D7B979D7BE011AB9EF64DB23210E4, xmp.iid:4BF4F11DA27BE011AB9EF64DB23210E4, xmp.iid:4CF4F11DA27BE011AB9EF64DB23210E4, xmp.iid:4DF4F11DA27BE011AB9EF64DB23210E4, xmp.iid:0721654FB57BE011BBCB8057C4CC54CD, xmp.iid:0821654FB57BE011BBCB8057C4CC54CD, xmp.iid:2945D6C4367CE011A650CE99BCACFFC4, xmp.iid:2A45D6C4367CE011A650CE99BCACFFC4, xmp.iid:2B45D6C4367CE011A650CE99BCACFFC4, xmp.iid:2C45D6C4367CE011A650CE99BCACFFC4, xmp.iid:670EA62E417CE011A650CE99BCACFFC4, xmp.iid:680EA62E417CE011A650CE99BCACFFC4, xmp.iid:690EA62E417CE011A650CE99BCACFFC4, xmp.iid:6A0EA62E417CE011A650CE99BCACFFC4, xmp.iid:6B0EA62E417CE011A650CE99BCACFFC4, xmp.iid:6C0EA62E417CE011A650CE99BCACFFC4, xmp.iid:6D0EA62E417CE011A650CE99BCACFFC4, xmp.iid:6E0EA62E417CE011A650CE99BCACFFC4, xmp.iid:6F0EA62E417CE011A650CE99BCACFFC4, xmp.iid:700EA62E417CE011A650CE99BCACFFC4, xmp.iid:710EA62E417CE011A650CE99BCACFFC4, xmp.iid:D1351C93487CE011A650CE99BCACFFC4, xmp.iid:D2351C93487CE011A650CE99BCACFFC4, xmp.iid:D3351C93487CE011A650CE99BCACFFC4, xmp.iid:D4351C93487CE011A650CE99BCACFFC4, xmp.iid:D5351C93487CE011A650CE99BCACFFC4, xmp.iid:D6351C93487CE011A650CE99BCACFFC4, xmp.iid:D7351C93487CE011A650CE99BCACFFC4, xmp.iid:D8351C93487CE011A650CE99BCACFFC4, xmp.iid:D9351C93487CE011A650CE99BCACFFC4, xmp.iid:DA351C93487CE011A650CE99BCACFFC4, xmp.iid:DB351C93487CE011A650CE99BCACFFC4, xmp.iid:8F1AE0835C7CE011A650CE99BCACFFC4, xmp.iid:901AE0835C7CE011A650CE99BCACFFC4, xmp.iid:911AE0835C7CE011A650CE99BCACFFC4, xmp.iid:921AE0835C7CE011A650CE99BCACFFC4, xmp.iid:931AE0835C7CE011A650CE99BCACFFC4, xmp.iid:D93B6AB5637CE0118710C78DBFD782C9, xmp.iid:DA3B6AB5637CE0118710C78DBFD782C9, xmp.iid:DB3B6AB5637CE0118710C78DBFD782C9, xmp.iid:DC3B6AB5637CE0118710C78DBFD782C9, xmp.iid:DD3B6AB5637CE0118710C78DBFD782C9, xmp.iid:C5F27967687CE01198E1C194A482CE59, xmp.iid:C6F27967687CE01198E1C194A482CE59, xmp.iid:C7F27967687CE01198E1C194A482CE59, xmp.iid:C8F27967687CE01198E1C194A482CE59, xmp.iid:673C91117C7CE011901A9BC4B4990D6C, xmp.iid:693C91117C7CE011901A9BC4B4990D6C, xmp.iid:6A3C91117C7CE011901A9BC4B4990D6C, xmp.iid:6B3C91117C7CE011901A9BC4B4990D6C, xmp.iid:6C3C91117C7CE011901A9BC4B4990D6C, xmp.iid:E58D06EC027DE0119B56E8DF04CFB0E5, xmp.iid:E68D06EC027DE0119B56E8DF04CFB0E5, xmp.iid:E78D06EC027DE0119B56E8DF04CFB0E5, xmp.iid:E88D06EC027DE0119B56E8DF04CFB0E5, xmp.iid:E98D06EC027DE0119B56E8DF04CFB0E5, xmp.iid:EA8D06EC027DE0119B56E8DF04CFB0E5, xmp.iid:EB8D06EC027DE0119B56E8DF04CFB0E5, xmp.iid:EC8D06EC027DE0119B56E8DF04CFB0E5, xmp.iid:ED8D06EC027DE0119B56E8DF04CFB0E5, xmp.iid:EE8D06EC027DE0119B56E8DF04CFB0E5, xmp.iid:24B05F0B067DE0119B56E8DF04CFB0E5, xmp.iid:25B05F0B067DE0119B56E8DF04CFB0E5, xmp.iid:26B05F0B067DE0119B56E8DF04CFB0E5, xmp.iid:27B05F0B067DE0119B56E8DF04CFB0E5, xmp.iid:28B05F0B067DE0119B56E8DF04CFB0E5, xmp.iid:29B05F0B067DE0119B56E8DF04CFB0E5, xmp.iid:2BB05F0B067DE0119B56E8DF04CFB0E5, xmp.iid:2CB05F0B067DE0119B56E8DF04CFB0E5, xmp.iid:2DB05F0B067DE0119B56E8DF04CFB0E5, xmp.iid:2EB05F0B067DE0119B56E8DF04CFB0E5, xmp.iid:F2983020157DE0119B56E8DF04CFB0E5, xmp.iid:F3983020157DE0119B56E8DF04CFB0E5, xmp.iid:F4983020157DE0119B56E8DF04CFB0E5, xmp.iid:F5983020157DE0119B56E8DF04CFB0E5, xmp.iid:F6983020157DE0119B56E8DF04CFB0E5, xmp.iid:F7983020157DE0119B56E8DF04CFB0E5, xmp.iid:F8983020157DE0119B56E8DF04CFB0E5, xmp.iid:F9983020157DE0119B56E8DF04CFB0E5, xmp.iid:FA983020157DE0119B56E8DF04CFB0E5, xmp.iid:FB983020157DE0119B56E8DF04CFB0E5, xmp.iid:FC983020157DE0119B56E8DF04CFB0E5, xmp.iid:D379388C207DE0119B56E8DF04CFB0E5, xmp.iid:D479388C207DE0119B56E8DF04CFB0E5, xmp.iid:D579388C207DE0119B56E8DF04CFB0E5, xmp.iid:D679388C207DE0119B56E8DF04CFB0E5, xmp.iid:B3C2AB71367DE0119A1EFEF30B54E2C4, xmp.iid:B4C2AB71367DE0119A1EFEF30B54E2C4, xmp.iid:B5C2AB71367DE0119A1EFEF30B54E2C4, xmp.iid:B6C2AB71367DE0119A1EFEF30B54E2C4, xmp.iid:B7C2AB71367DE0119A1EFEF30B54E2C4, xmp.iid:B8C2AB71367DE0119A1EFEF30B54E2C4, xmp.iid:B9C2AB71367DE0119A1EFEF30B54E2C4, xmp.iid:BAC2AB71367DE0119A1EFEF30B54E2C4, xmp.iid:BBC2AB71367DE0119A1EFEF30B54E2C4, xmp.iid:BCC2AB71367DE0119A1EFEF30B54E2C4, xmp.iid:BDC2AB71367DE0119A1EFEF30B54E2C4, xmp.iid:E79C0D163E7DE0119A1EFEF30B54E2C4, xmp.iid:E89C0D163E7DE0119A1EFEF30B54E2C4, xmp.iid:77ABCC88A940E11191CFEDFA1228D17E, xmp.iid:78ABCC88A940E11191CFEDFA1228D17E, xmp.iid:79ABCC88A940E11191CFEDFA1228D17E, xmp.iid:9A496CF5CB40E11190CEBFEFD559CA54, xmp.iid:9B496CF5CB40E11190CEBFEFD559CA54, xmp.iid:0D7F292DE340E11190CEBFEFD559CA54, xmp.iid:0E7F292DE340E11190CEBFEFD559CA54, xmp.iid:EA8CF3209541E1119AB9A2D9E2E27F33, xmp.iid:BFC8DA2E3542E1119501F01E0FB924AD, xmp.iid:C0C8DA2E3542E1119501F01E0FB924AD, xmp.iid:5C98E0F3D54AE111A7E3D39157E30C60, xmp.iid:5D98E0F3D54AE111A7E3D39157E30C60, xmp.iid:4D8C56C1784CE1118399D453F8B9AEAC, xmp.iid:4E8C56C1784CE1118399D453F8B9AEAC, xmp.iid:F9064401334DE111A748CC88538A96B4, xmp.iid:FA064401334DE111A748CC88538A96B4, xmp.iid:57C25B85E455E111AD2DC2EBB5E4F15B, xmp.iid:58C25B85E455E111AD2DC2EBB5E4F15B, xmp.iid:59C25B85E455E111AD2DC2EBB5E4F15B, xmp.iid:5AC25B85E455E111AD2DC2EBB5E4F15B, xmp.iid:66549268EC56E111952AC8EBB2521F2E, xmp.iid:6B549268EC56E111952AC8EBB2521F2E, xmp.iid:4623E9CC327EE1119057A78EA1A46372, xmp.iid:4C23E9CC327EE1119057A78EA1A46372, xmp.iid:AF7A3E69497EE1119057A78EA1A46372, xmp.iid:46AF4D64D582E111B9628C606A55137E, xmp.iid:47AF4D64D582E111B9628C606A55137E, xmp.iid:48AF4D64D582E111B9628C606A55137E, xmp.iid:0FC2EC9CDD82E111B9628C606A55137E, xmp.iid:8B5B19B4E589E1119796AABEEC048FBE, xmp.iid:7E03D0B7EA89E1119796AABEEC048FBE, xmp.iid:E90FB2C9FECEE111A68AB8DC81631B8A
History When                    : 2011:05:03 18:59:16+09:00, 2011:05:03 18:59:16+09:00, 2011:05:03 19:13:57+09:00, 2011:05:03 19:20:54+09:00, 2011:05:11 13:01:29+09:00, 2011:05:11 13:01:47+09:00, 2011:05:11 13:02:08+09:00, 2011:05:11 13:03:47+09:00, 2011:05:11 13:05:27+09:00, 2011:05:11 13:06:34+09:00, 2011:05:11 13:07:03+09:00, 2011:05:11 14:53:26+09:00, 2011:05:11 14:55:17+09:00, 2011:05:11 14:57:21+09:00, 2011:05:11 15:12:44+09:00, 2011:05:11 15:19:23+09:00, 2011:05:11 15:21:07+09:00, 2011:05:11 15:35:25+09:00, 2011:05:11 15:43:16+09:00, 2011:05:11 15:51:56+09:00, 2011:05:11 15:52:12+09:00, 2011:05:11 16:01:25+09:00, 2011:05:11 16:05:54+09:00, 2011:05:11 16:09:20+09:00, 2011:05:11 16:09:47+09:00, 2011:05:11 16:16:12+09:00, 2011:05:11 16:16:52+09:00, 2011:05:11 16:19:42+09:00, 2011:05:11 16:29:42+09:00, 2011:05:11 16:30:03+09:00, 2011:05:11 16:30:50+09:00, 2011:05:11 16:37:17+09:00, 2011:05:11 16:40:06+09:00, 2011:05:11 16:41:43+09:00, 2011:05:11 16:41:50+09:00, 2011:05:11 16:42:19+09:00, 2011:05:11 18:59:07+09:00, 2011:05:11 19:01:23+09:00, 2011:05:12 10:54:34+09:00, 2011:05:12 11:01:48+09:00, 2011:05:12 11:02:52+09:00, 2011:05:12 11:17:49+09:00, 2011:05:12 11:40:21+09:00, 2011:05:12 11:43:34+09:00, 2011:05:12 11:44:06+09:00, 2011:05:12 11:44:43+09:00, 2011:05:12 12:05:37+09:00, 2011:05:12 12:06:29+09:00, 2011:05:12 12:10:56+09:00, 2011:05:12 12:14:51+09:00, 2011:05:12 12:14:58+09:00, 2011:05:12 12:15:45+09:00, 2011:05:12 12:32:53+09:00, 2011:05:12 12:33:16+09:00, 2011:05:12 13:36:35+09:00, 2011:05:12 13:39:43+09:00, 2011:05:12 13:40:12+09:00, 2011:05:12 13:58:24+09:00, 2011:05:12 13:58:48+09:00, 2011:05:12 13:59:57+09:00, 2011:05:12 14:11:16+09:00, 2011:05:12 14:18:53+09:00, 2011:05:12 14:20:42+09:00, 2011:05:12 14:37:13+09:00, 2011:05:12 14:56:01+09:00, 2011:05:12 14:57:51+09:00, 2011:05:12 15:06:01+09:00, 2011:05:12 15:45:11+09:00, 2011:05:12 15:45:21+09:00, 2011:05:12 15:47:30+09:00, 2011:05:12 15:51:59+09:00, 2011:05:12 16:01:33+09:00, 2011:05:12 16:10:18+09:00, 2011:05:12 16:16:58+09:00, 2011:05:12 16:21:07+09:00, 2011:05:12 16:24:36+09:00, 2011:05:12 16:28:55+09:00, 2011:05:12 16:30:09+09:00, 2011:05:12 18:41:53+09:00, 2011:05:12 18:47:04+09:00, 2011:05:12 19:06:15+09:00, 2011:05:12 19:06:28+09:00, 2011:05:12 19:06:49+09:00, 2011:05:13 10:47:12+09:00, 2011:05:13 10:47:56+09:00, 2011:05:13 10:50:38+09:00, 2011:05:13 10:56:19+09:00, 2011:05:13 10:57:45+09:00, 2011:05:13 10:57:54+09:00, 2011:05:13 10:59:21+09:00, 2011:05:13 10:59:52+09:00, 2011:05:13 11:01:29+09:00, 2011:05:13 11:05:52+09:00, 2011:05:13 11:09:33+09:00, 2011:05:13 11:15:50+09:00, 2011:05:13 11:16:09+09:00, 2011:05:13 11:18:45+09:00, 2011:05:13 11:48:08+09:00, 2011:05:13 11:51:02+09:00, 2011:05:13 12:38:40+09:00, 2011:05:13 12:52:51+09:00, 2011:05:13 12:55:23+09:00, 2011:05:13 12:56:41+09:00, 2011:05:13 12:57:30+09:00, 2011:05:13 13:13:58+09:00, 2011:05:13 13:15:41+09:00, 2011:05:13 13:16:33+09:00, 2011:05:13 13:17:22+09:00, 2011:05:13 13:17:45+09:00, 2011:05:13 13:23:15+09:00, 2011:05:13 13:28:58+09:00, 2011:05:13 13:30:55+09:00, 2011:05:13 13:32:29+09:00, 2011:05:13 13:32:39+09:00, 2011:05:13 14:19:16+09:00, 2011:05:13 14:20:46+09:00, 2011:05:13 14:20:59+09:00, 2011:05:13 14:20:59+09:00, 2011:05:13 16:56+09:00, 2011:05:13 16:56:44+09:00, 2011:05:13 17:07:53+09:00, 2011:05:13 17:16:08+09:00, 2011:05:13 17:18:56+09:00, 2011:05:13 17:19:11+09:00, 2011:05:13 17:25:46+09:00, 2011:05:13 17:28:18+09:00, 2011:05:13 17:30:33+09:00, 2011:05:13 17:30:43+09:00, 2011:05:13 17:43:59+09:00, 2011:05:13 17:50:43+09:00, 2011:05:13 17:51:52+09:00, 2012:01:17 11:55:55+09:00, 2012:01:17 11:56:32+09:00, 2012:01:17 11:56:32+09:00, 2012:01:17 14:27:33+09:00, 2012:01:17 14:30:45+09:00, 2012:01:17 17:13:45+09:00, 2012:01:17 17:17:33+09:00, 2012:01:18 14:30:44+09:00, 2012:01:19 10:16:25+09:00, 2012:01:19 10:16:48+09:00, 2012:01:30 09:14:35+09:00, 2012:01:30 09:15:20+09:00, 2012:02:01 11:06:18+09:00, 2012:02:01 11:06:47+09:00, 2012:02:02 10:18:56+09:00, 2012:02:02 10:19:42+09:00, 2012:02:13 10:46:17+09:00, 2012:02:13 10:48:36+09:00, 2012:02:13 10:48:36+09:00, 2012:02:13 10:53:44+09:00, 2012:02:14 18:26:33+09:00, 2012:02:14 19:26:56+09:00, 2012:04:04 17:47:24+09:00, 2012:04:04 18:32:02+09:00, 2012:04:04 20:41:46+09:00, 2012:04:10 15:23:03+09:00, 2012:04:10 15:24:53+09:00, 2012:04:10 15:29:01+09:00, 2012:04:10 16:20:12+09:00, 2012:04:19 15:16:31+09:00, 2012:04:19 15:56:09+09:00, 2012:07:16 13:36:29+09:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0
History Changed                 : /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:a9b37b14-5103-4464-bbdd-2676de5eddec, xmp.iid:F50BAF49447CE011A1EC914B7604F714, uuid:d6526ad7-3ef0-49c8-a67d-8cae3a962444, uuid:d6526ad7-3ef0-49c8-a67d-8cae3a962444, uuid:5ae8c531-a9cd-4352-b5bf-ae35f04334ed, uuid:af56bd26-c1f6-4148-a4e9-1ca504fc9c42, uuid:da129eab-4049-4a06-bdb2-8620484a905f, uuid:110e3600-510a-41bb-b992-ce0cf6073641, uuid:441ea3bd-8dbd-47ab-b89f-dbafd3f4fc22, uuid:fea283b8-6c77-42c0-a5a3-da172cf356a2, uuid:2e1c782b-8653-4703-8f5c-84c8e935c90e, uuid:c63047ba-ef61-48d5-84b1-df8291ac05b5, uuid:786c8159-939f-4472-a6a4-5fcc73503537, uuid:cceaa2f1-9e6f-4aaa-92a7-24728e342120, uuid:a78ffcd7-4fe9-4c4c-acca-be84921e851d, uuid:e5b856c6-2091-4b32-b297-dd6086592d35, uuid:3479f6ca-ed05-44da-a11b-10965c3ab11b, uuid:8e65dc1f-5a93-4775-8bfb-d835e1714c20, uuid:bf853023-c2a9-43af-aac8-5f35556dfb53, uuid:364e6b8f-1193-4a07-b3b5-03604d5a6b01, uuid:19f67413-493e-434c-a6b4-da089576a48a, uuid:85b6b37c-6069-4b7a-918d-404c64ce0080, uuid:659d3f97-0dd5-4fae-a5a2-24f76205e804, uuid:7dcc7a5c-19e6-464a-8b2e-d1af6bad65ea, uuid:7dcc7a5c-19e6-464a-8b2e-d1af6bad65ea, uuid:7dcc7a5c-19e6-464a-8b2e-d1af6bad65ea, uuid:bb61cf36-cafa-4060-98c7-940992125006, uuid:12118d33-ec16-4bd0-80ae-65d08d36e43f, uuid:7dcc7a5c-19e6-464a-8b2e-d1af6bad65ea, uuid:0d87e382-8c65-49c7-bdcd-ed081a4169df, uuid:4c8571a0-1d63-4ce2-9275-37cc958adad7, uuid:2bf8c4ce-fdcd-4615-8756-6e6cfc1d3c00, uuid:1f0acee2-f29f-4170-8cd6-09420a8352e2, uuid:45822ef9-f927-4d21-9f49-6a68e4c570be, uuid:ef6ff6ac-784b-4484-80ee-a132f2335c44, uuid:aa959287-c0a1-47fa-82d1-fab6f9fd0e3c, uuid:9127fb63-c33b-45fa-9980-0761aba0de14, uuid:6c5ac1c3-b50c-4a20-9219-de723b3987c1, uuid:b3718a66-47f2-4255-8156-ff3179ba2d2d, uuid:528a33c0-7248-495f-b44e-e3b59977c089, uuid:25814805-22c8-41a6-a6e6-6870dc7b3324, uuid:b8270026-0184-49f6-9088-143b17ac1a21, uuid:60e72981-7b02-41af-a6b7-5b86906deb61, uuid:659d3f97-0dd5-4fae-a5a2-24f76205e804, uuid:b3f86d98-0ec5-49d6-b9f0-7f0e7e287c51, uuid:d5519281-32e4-4d86-b30a-ff861ead109d, uuid:1631abf3-7971-4cf4-91d7-f7f21fb53f7e, uuid:622ba237-c309-4a31-b442-d409fa30d8c3, uuid:b6821d63-38d6-4f67-a0ee-451f907cb4f2, uuid:b3f86d98-0ec5-49d6-b9f0-7f0e7e287c51, uuid:b28b9ffc-5129-4407-915f-16675ead8206, uuid:d5519281-32e4-4d86-b30a-ff861ead109d, uuid:a122eaf3-80c8-40d9-a1b3-4aa70fbb9619, uuid:f9fea939-d942-43fa-8483-962479b42612, uuid:7ce44f45-7e19-45e3-99f5-dfcad411898b, uuid:a44c9b0d-696b-4782-94c7-57f4f8034a0c, uuid:23eea904-cc49-475b-980e-53d41da86faa, uuid:6ded1bec-9f09-4492-89bf-bc67cf4d04c6, uuid:4f0c4dc1-58f9-4327-9444-23ebd8091240, uuid:a13bc039-83b6-4e7c-a076-191d7282be26, uuid:0B43C3CC4B14DF11B169D93593F8610F, xmp.iid:A687F00B0B7DE01186DD91E5E16273B2, uuid:ad98e51d-c23d-425f-916f-d28fbc6a5a56, xmp.iid:759F38EE0C7DE0118D7AF167A636A006, xmp.iid:769F38EE0C7DE0118D7AF167A636A006, uuid:86b59ba4-fbf3-4625-8e16-5ac67d68f4f4, uuid:805132f3-d2b9-41c7-a3ff-fe6ea25a6dd7, uuid:435ea641-16ae-46dd-a639-16c81c7f7c3f, uuid:9a2732e1-6abe-4dfc-8f4c-ac4b51f9acb8, xmp.iid:AE783D7ECB40E11195D0991F655D1957, uuid:085793b8-3d0b-427c-b2d7-2f6e14421255, uuid:9015b6f2-8310-44f4-8b04-b6be05711a44, uuid:4f0c4dc1-58f9-4327-9444-23ebd8091240, uuid:c457f4b5-fe02-4574-99ec-31f916cf6df7, uuid:07d0e16d-9d6a-4d3b-ac1c-229d4bc7b7b7, uuid:5ae8c531-a9cd-4352-b5bf-ae35f04334ed, uuid:c457f4b5-fe02-4574-99ec-31f916cf6df7, uuid:c457f4b5-fe02-4574-99ec-31f916cf6df7, uuid:71F2F56EF167DF118A36FE6827D11B11
Manifest Reference Document ID  : uuid:1d9d612d-2ace-46ee-83ec-f670a5268f2c, xmp.did:F50BAF49447CE011A1EC914B7604F714, uuid:d2187662-f1a5-4d8e-b545-c099ea3b8998, uuid:d2187662-f1a5-4d8e-b545-c099ea3b8998, uuid:d2187662-f1a5-4d8e-b545-c099ea3b8998, uuid:5126b6a6-8586-45aa-8cf4-4931a832ca60, uuid:8cca2891-09f9-4c8d-ab18-f8d729831259, uuid:e28d6643-655f-4eca-8ccf-f0b9b8f378db, uuid:4c30658b-9b8d-4d12-8802-853255bafbf2, uuid:13bfc148-a168-4bbb-905f-0c1d0e7299eb, uuid:5550638b-ea61-4f50-8e02-b2f9570a5d54, uuid:8041b655-fefb-4961-bb17-c76d34ce65db, uuid:217eaf73-f3b7-49da-973b-0936bd5a1f44, uuid:6e805ec6-795d-49bf-89c3-8f5dfd15d5bf, uuid:039efba0-4ff4-4f53-85d5-d96be447bcd9, uuid:c3f02bfd-c01b-43d7-8f30-62542ba69907, uuid:900d523e-0c41-49b4-b20e-0ee44d1ca3af, uuid:1b7ff839-0832-47c5-9c35-b906af4ffdbe, uuid:89a24cf5-8539-468c-a51f-3bd91fa0b47e, uuid:7b6db041-3d78-41b5-b628-2864748ed921, uuid:03cfc397-f7ec-46e4-8cf1-ea7ca119fd8e, uuid:8c0a7113-fa6b-4455-8c9b-b6443f6b197d, xmp.did:DD03B717327EE11184F69CE2BCC46C7B, uuid:65fddfb5-c1c2-4b66-9a59-db61289b6847, uuid:65fddfb5-c1c2-4b66-9a59-db61289b6847, uuid:65fddfb5-c1c2-4b66-9a59-db61289b6847, uuid:17e31d67-9edc-422c-bedd-1300bc87e254, uuid:17e31d67-9edc-422c-bedd-1300bc87e254, uuid:65fddfb5-c1c2-4b66-9a59-db61289b6847, uuid:dd4dff33-5bea-4433-9cf5-7482e022904a, uuid:47615025-99d8-4e92-9b13-e97ca8d28ab7, uuid:294fb3f0-8fe7-4367-b8ba-81044f3a25b5, uuid:59fff5dc-e520-45ac-adb6-4d0dca2a057c, uuid:e16cb3f8-456c-4120-9b73-4ff0f6292893, uuid:3793b9c1-b46a-4992-b36b-d4a4ce9d896a, uuid:a296587f-3096-4f7a-aa2a-064f84dac2d1, uuid:7c50e263-98d0-4ecd-8962-4e47be192fc2, uuid:6176a628-1203-4a75-af56-d8f1fcbfe33e, uuid:ec8e7fdd-8bb1-4428-aa3f-17de810df51a, uuid:bc2fca71-dc8b-4402-b760-aa0761fc0e05, uuid:9eda1424-a8d6-49bd-87a0-c77337d62f21, uuid:761e7b98-2b46-4e16-adfd-76bf10e66ce6, uuid:ef244b61-88eb-425d-96c2-c241918a111b, xmp.did:DD03B717327EE11184F69CE2BCC46C7B, uuid:c5b626f1-21c3-4b52-8659-e729efbebd05, uuid:be26155a-d6a2-4fa4-9eed-73f984d29b76, uuid:b56e7317-0e9e-487a-aee9-78187d49331b, uuid:26b4ebbc-7c8b-4421-9bb7-5f835abbca40, uuid:a0953e7a-976f-4fab-8bad-05a0acf246c4, uuid:c5b626f1-21c3-4b52-8659-e729efbebd05, uuid:ef7d60a0-3349-4136-9aac-4b2ae123b69c, uuid:be26155a-d6a2-4fa4-9eed-73f984d29b76, uuid:a1cb3533-254a-4a5b-9b82-aaee5e499b12, uuid:a3926044-e00e-445e-a5ec-ed7e41d639ec, uuid:04498a96-922d-4002-9a46-7027a06c1f8d, uuid:8f253ee9-5d34-4ca8-8e3e-d469d08108dc, uuid:d618b85f-6221-49c5-8fb4-43c08c2075f8, uuid:61cee71e-46de-410e-a34e-979f4a1dc810, uuid:d2d09d1e-720d-418d-84ed-4ab7011944d2, uuid:F20AF992CBCEDC11A301E56FE04C2B82, uuid:0643C3CC4B14DF11B169D93593F8610F, xmp.did:A687F00B0B7DE01186DD91E5E16273B2, uuid:38b3729c-071e-4eea-8180-583e70644dbe, xmp.did:759F38EE0C7DE0118D7AF167A636A006, xmp.did:769F38EE0C7DE0118D7AF167A636A006, uuid:809306c4-94a2-48e7-a643-530a2492b749, uuid:77b3f223-1b5b-4818-a4d8-214926099c05, uuid:167d2045-41f5-4e09-b778-34fc7bfde61c, uuid:01bb38d4-8db1-40cf-8d8f-800201dffb30, xmp.did:AE783D7ECB40E11195D0991F655D1957, uuid:667f18ed-adfa-4968-81dc-6f5ef80b6545, uuid:a0236f4e-58fa-482a-bf31-91bcb4bc47fc, uuid:d2d09d1e-720d-418d-84ed-4ab7011944d2, uuid:9605d644-7608-4c85-aeff-fd766fc8d048, uuid:d2187662-f1a5-4d8e-b545-c099ea3b8998, uuid:d2187662-f1a5-4d8e-b545-c099ea3b8998, uuid:9605d644-7608-4c85-aeff-fd766fc8d048, uuid:9605d644-7608-4c85-aeff-fd766fc8d048, uuid:44415FAAE867DF118A36FE6827D11B11
Doc Change Count                : 6017
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.0
Trapped                         : False
Page Count                      : 20

EXIF Metadata provided by EXIF.tools

Samsung (14.15 MB) DE68 04108A 01 SMH1927 XAA EN 120725

Navigation menu

Versions of this User Manual:

Views

Navigation