Samsung GH68 05349A User Manual To The 3606bb3d 76d8 41a0 9926 B5a11da02bee
User Manual: Samsung GH68-05349A to the manual
Open the PDF directly: View PDF
Page Count: 189 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Contents
- Important safety precautions
- Unpacking
- Your phone
- Getting started
- Inserting/Removing the SIM card
- Installing/Removing/Charging the battery
- 1. Insert the teeth on the bottom of the battery into the corresponding slots on the phone..
- 2. Press the battery against the back of the phone until it clicks into place.
- 1. Switch off the phone by pressing and holding the key.
- 2. To remove the battery, pull the battery catch toward the top of the phone and hold it in that position. Lift the battery away from the phone.
- 1. Plug the connector of the travel adapter into the jack at the bottom of the phone.
- 2. Plug the adapter into a standard AC wall outlet.
- 3. When charging is finished, disconnect the adapter from the power outlet and from the phone by pressing the grey tabs on both sides of the connector and pulling the connector out.
- Switching the phone on or off
- Selecting functions and options
- Locking or unlocking the keypad
- Call functions
- Making a call
- 1. Press and hold the 0 key for the international prefix. The + character appears.
- 2. Enter the country code, area code and phone number and press the key.
- 1. Press the key in Idle Mode to access the Call log list.
- 2. Use the Up and Down keys to scroll through the list until the number you want highlights.
- 3. To dial the number, press the key.
- 1. Press the Missed soft key.
- 2. If necessary, scroll to the number you want by pressing the Up or Down key.
- 3. To dial the number, press the key.
- Ending a call
- Answering a call
- Rejecting a call
- Adjusting the volume
- Accessing options during a call
- 1. Press the Options soft key.
- 2. Press the Up or Down key to highlight the Loud spk. on / Loud spk. off option. Press the Select soft key.
- 1. Press the Options soft key.
- 2. When Mute highlights, press the Select soft key.
- 1. Press the Options soft key.
- 2. When Unmute highlights, press the Select soft key.
- 1. Press the Options soft key.
- 2. If necessary, press the Up or Down key to highlight the Contacts option. Press the Select soft key.
- 3. Select the Find name option and press the Select soft key.
- 4. Enter the first a few letters of the name that you want to find.
- 5. To view the highlighted entry, press the Ok soft key.
- 1. When you are connected to the teleservice system, press the Options soft key.
- 2. Press the Up or Down key to highlight the Send DTMF option. Press the Select soft key.
- 3. Enter the number you want to send and press the OK soft key.
- 1. Press the Options soft key.
- 2. Press the Up or Down key to highlight the Message option. Press the Select soft key.
- 3. To read a received message, select the Inbox option, and then scroll to the message that you want to read.
- 4. Press the Select soft key.
- 1. Press the Options soft key.
- 2. Press the Up or Down key to highlight the Voiceclarity on / Voiceclarity off option. Press the Select soft key.
- 1. Enter the phone number that you want to dial or look it up in the Contacts.
- 2. Press the key to dial the second call. The first call is automatically put on hold.
- 1. Put the current call on hold by pressing the Hold soft key.
- 2. Make the second call in the normal way.
- 1. Press the key to answer the incoming call. The first call is automatically put on hold.
- 2. To switch between the two calls, press the Swap soft key.
- 3. To end the call on hold, press the Options soft key and select the End held call option.
- 1. During a call, answer or make a call in the normal way, and press the Options soft key.
- 2. Press the Up or Down key to select the Transfer option and press the Select soft key.
- 1. Call the first participant in the normal way.
- 2. Call the second participant in the normal way. The first call is automatically put on hold.
- 3. To join the first participant to the multi-party call, press the Options soft key and select the Join option. Press the Select soft key.
- 4. To add a new person to the multi-party call, call the person in the normal way. Then press the Options soft key and select the Join option. Press the Select soft key.
- 1. Press the key to answer the incoming call. The first call is automatically put on hold.
- 2. To switch between the two calls, press the Swap soft key.
- 3. To end the call on hold, press the Options soft key and select the End held multiparty option or End held call option.
- 1. Press the Accept soft key.
- 2. Select the End held option to end the call on hold.
- 1. Press the Options soft key and select the Split option. Press the Select soft key.
- 2. Press the Up or Down key to highlight a participant and press the Select soft key.
- 3. To return to the multi-party call, press the Options soft key and select the Join option.
- 4. Press the Select soft key.
- 1. Press the Options soft key and select the Remove option.
- 2. Press the Up or Down key to highlight a participant and press the Select soft key.
- 3. End the multi-party call by pressing the key.
- Using the ear-microphone
- Making a call
- Entering text
- Changing the text input mode
- Using the T9 mode
- 1. Start entering the word by pressing keys 2 to 9. Press each key only once for each letter.
- 2. Enter the whole word before editing or deleting any keystrokes.
- 3. If the word is correct, start entering the next word. Otherwise, press the 0 key repeatedly to display alternative word choices for the keys that you have pressed.
- 4. Insert a space between words by pressing the key.
- 5. Continue entering the next word.
- 1. Press the Spell soft key, or press the right soft key and select the Add word option.
- 2. Enter the word you want to add using the ABC mode (see page 46) and press the Ok soft key.
- 3. Continue entering other words in the T9 mode.
- Using the ABC mode
- Using the symbolic mode
- Using the number mode
- Using the menus
- Accessing a menu function
- 1. In Idle Mode, press the Menu soft key to access the main menu or press the Contacts soft key to access Contacts menu.
- 2. Scroll through the menus using the navigation keys. And then press the Select soft key if you access the main menu.
- 3. Find the sub-menu that you wish to use by scrolling with the Up or Down key.
- 4. Press the Select soft key to access the sub- menu.
- 5. Scroll to the option you want to choose with the Up or Down key.
- 6. Press the Select soft key to choose the setting.
- 1. Press the Menu soft key.
- 2. Press the 5 for Messages.
- 3. Press the 5 for Answer phone.
- List of menu functions
- 1. Contacts (see page 57)
- 2. Management (see page 67)
- 3. Services (see page 69)
- 1. Call history (see page 70)
- 2. Games (see page 74)
- 3. Phone settings (see page 79)
- 4. Camera (see page 99)
- 5. Messages (see page 108)
- 6. WAP (see page 135)
- 7. SAT (SIM Application Toolkit) (see page 142)
- 8. Media album (see page 143)
- 9. Calendar (see page 147)
- Accessing a menu function
- Contacts menu
- Find name
- Add entry
- 1. Enter the number you want to save.
- 2. When you are sure that the number is correct, press the Save soft key.
- 3. Select the memory where the number is to be stored, either Phone or SIM, and press the Select soft key.
- 4. If you select SIM in step 3, go to step 5.
- 5. Enter the associated name.
- 6. When you are satisfied, press the Ok soft key.
- 7. If you select Phone in step 3, go to step 8.
- 8. If you want to change the entry, use the options. for information about how to do it, see page 58.
- Speed list
- 1. Press the Up or Down key to scroll to an empty location and press the Select soft key.
- 2. When the Edit number option highlights, press the Select soft key.
- 3. Enter a phone number and press the Ok soft key. Or,
- 4. When you have finished, press the soft key or the key to exit.
- 1. Select the speed-dial entry you want to edit from the list and press the Select soft key.
- 2. Select one of the following menu options by pressing the Up or Down key and press the Select soft key:
- 3. When you have finished, press the soft key or the key to exit.
- 1. Enter the number of the SIM card location where the number you want to dial is stored.
- 2. Press the key.
- 3. Press the Dial soft key or the key.
- Copy all to phone
- Send all via infrared
- 1. Align the IrDA ports on both sides each other.
- 2. Access the Send all via infrared menu option in the Contacts menu and choose one of the following options and press the Select soft key:
- 3. When you select All and press the OK soft key, your phone displays all of the Contacts entries.
- 4. Scroll to the entry you want to send as beginning and press the OK soft key.
- 1. Align the IrDA ports on both sides each other.
- 2. Access the Infrared activation menu (see page 97) and select On to activate the port.
- 3. When your phone receives Contacts data from the other device:
- 4. Press the Save soft key to store the entry.
- 5. Press the SIM or Phone soft key.
- Delete all
- 1. Scroll to a desired memory selection and place a check mark ahead of it by pressing the Select soft key.
- 2. If necessary, repeat step 1 to check another options.
- 3. When you have finished checking, press the Ok soft key.
- 4. When a confirming message appears, press the Yes soft key to delete all of the entries in the memory(ies). Then enter the phone password and press the Ok soft key.
- Own number
- 1. Scroll to an empty location by pressing the Up or Down key and press the Select soft key.
- 2. When Edit number highlights, press the Select soft key.
- 3. Enter your number and press the Ok key.
- 4. To assign a name, press the Down key to move to Change name and press the Select soft key.
- 5. Enter a name and press the Ok soft key.
- 6. When you have finished, press the soft key or the key to exit.
- 1. Select the entry you want to delete from the Own number list and press the Select soft key.
- 2. Scroll to Delete by pressing the Up or Down key and press the Select soft key.
- 3. When a confirming message appears, press the Yes soft key to delete the number.
- 4. When you have finished, press the soft key or the key to exit.
- Group setting
- Memory status
- Service directory
- Call history
- Games
- Phone settings
- Sound settings
- Display
- Language
- Security
- Network services
- 1. Select the type of call diverting by pressing the Up or Down key and then press the Select soft key.
- 2. Select the type of calls to be diverted by pressing the Up or Down key and then press the Select soft key.
- 3. Press the Activate soft key to confirm your settings.
- 4. Enter the number to which the calls are to be diverted.
- 5. When you are satisfied, press the Ok soft key.
- 1. Select the call diverting option to be deactivated.
- 2. Select the type of calls to which this option applies.
- 3. Press the Remove soft key.
- 1. Select the type of call barring by pressing the Up or Down key and then press the Select soft key.
- 2. Select the type of calls to be barred by pressing the Up or Down key and then press the Select soft key.
- 3. Press the Activate soft key to confirm your settings.
- 4. Enter your call barring password supplied by your service provider and press the Ok soft key.
- 1. Select the call barring option to be deactivated.
- 2. Select the type of calls to which this option applies.
- 3. Press the Deactivate soft key.
- 4. Enter your call barring password supplied by your service provider.
- 1. Select Change barring password from the Call barring screen, and press the Select soft key.
- 2. Enter the current password and press the Ok soft key.
- 3. Enter a new password and press the Ok soft key.
- 4. Enter the new password again to confirm it and press the Ok soft key.
- 1. Select the type of calls to which the call waiting option is to be applied by pressing the Up or Down key and then press the Select soft key.
- 2. Press the Activate soft key to confirm your settings.
- 1. Select the type of call to which the option applies.
- 2. Press the Deactivate soft key.
- 1. Press the Up or Down key until the appropriate option highlights and press the Select soft key.
- 2. Press the Up or Down key until the preferred network highlights and press the Select soft key.
- Others
- Reset settings
- Camera
- Take photos
- 1. Slide the folder up.
- 2. To take pictures immediately in Idle Mode, press and hold the Camera () key on the right side of the phone. Or select the take photos menu options in the Homescreen Menu.
- 3. Adjust the image by aiming the camera to the subject.
- 4. Press the soft key or the Camera () key on the right side of the phone to take a picture.
- 5.
- My photos
- My albums
- Delete all
- 1. Scroll to a photo box and place a check mark ahead it by pressing the Select soft key.
- 2. If necessary, repeat step 1 to check another box.
- 3. When you have finished checking, press the Ok soft key.
- 4. When a confirming message appears, press the Yes soft key to delete all of the photos in the box(es).
- Settings
- Memory status
- Take photos
- Messages
- Text messages
- 1. Create a message.
- 2. While entering your message, press the Options soft key to use the following options.
- 3. When you have finished entering your message, choose Send from the options.
- 4. Enter a destination number on the Address screen.
- 5. When you have finished entering the numbers, press the Ok soft key.
- 6. If the Enter centre screen displays, enter the service number and press the Ok soft key.
- 1. Scroll to a message box and place a check mark ahead of it by pressing the Select soft key.
- 2. If necessary, repeat step 1 to check another box.
- 3. When you have finished checking, press the Ok soft key.
- 4. When a confirming message appears, press the Yes soft key to delete all of the messages in the box(es).
- Photo messages
- 1. Select one of the following items using the Up or Down key and press the Add soft key.
- 1. Enter a subject of your message. For details about entering characters, see page 42.
- 2. Press the Ok soft key.
- 1. Select the Create new option.
- 2. Take a photo using the camera feature. For details about the camera feature, see page 99.
- 3. Select one of pictures you want to add. The picture is displayed.
- 4. Press the Add soft key.
- 1. Select one of the picture categories. The picture list of the category is displayed.
- 2. Select one of pictures you want to add. The picture is displayed.
- 3. Press the Add soft key.
- 1. Select the Record new option.
- 2. Press the Record soft key to start recording.
- 3. Press the Stop soft key to stop recording.
- 4. Press the Play soft key to replay the sound. Or, press the Add soft key to add it. Enter the sound’s name and press the Ok soft key. The sound is added to the message and saved in Media album automatically.
- 1. Select one of the sound categories. The sound list of the category is displayed.
- 2. Select one of the sounds you want to add.
- 3. Press the Select soft key to add it.
- 1. Enter a new message. Or you can enter a preset message.
- 2. Press the Options soft key and select the Done option to add the message.
- 3. When you finish creating the message, select Send from the options.
- 4. Select an entry on the Send screen.
- 5. To send the message to multiple destinations up to 20, repeat step 4.
- 6. When you have finished entering the destinations, press the Send soft key.
- 1. Scroll to a message box and place a check mark ahead of it by pressing the Select soft key.
- 2. If necessary, repeat step 1 to check another box.
- 3. When you have finished checking, press the Ok soft key.
- 4. When a confirming message appears, press the Yes soft key to delete all of the messages in the box(es).
- Push messages
- Preset messages
- Answer phone
- Broadcast
- Settings
- Memory status
- Text messages
- WAP
- Home
- 1. Press the key or scroll to the logo on the top left of all WAP pages and then press the soft key.
- 2. Highlight the required option using the Up or Down key.
- 3. Press the soft key to select the option.
- 4. If necessary, select the secondary option by pressing the Up or Down key and then press the soft key.
- Bookmark
- Go to URL
- Clear cache
- Proxy settings
- Current proxy
- Home
- SAT (SIM Application Toolkit)
- Media album
- Photos
- Images
- Sounds
- Delete all
- 1. Scroll to a box and place a check mark ahead it by pressing the Select soft key.
- 2. If necessary, repeat step 1 to check another box.
- 3. When you have finished checking, press the Ok soft key.
- 4. When a confirming message appears, press the Yes soft key to delete all of the photos in the box(es).
- 1. Scroll to a sound box and place a check mark ahead it by pressing the Select soft key.
- 2. If necessary, repeat step 1 to check another box.
- 3. When you have finished checking, press the Ok soft key.
- 4. When a confirming message appears, press the Yes soft key to delete all of the sounds in the box(es).
- Memory status
- Calendar
- New memo
- 1. Write your memo of up to 100 characters and press the Ok soft key.
- 2. Select the category of the memo to be saved and press the Select soft key.
- 3. Scroll to a date on the calendar by pressing the navigation keys. Press the Select soft key.
- 4. If applicable depending on the category you selected, enter the event time and press the Ok soft key.
- 5. If you have selected the 12-hour time format (see page 154), select AM or PM by pressing the Up or Down key and then press the Select soft key.
- 6. To set an alarm for the memo, press the Yes soft key.
- 7. Enter the time for the alarm to sound and press the Ok soft key.
- 8. If you have selected the 12-hour time format (see page 154), select AM or PM by pressing the Up or Down key and then press the Select soft key.
- 9. Select an alarm melody and press the Select soft key.
- 10. You can choose the following option by pressing the Options soft key:
- 11. When you have finished, press the soft key or the key to exit.
- Calendar
- To do list
- Clock
- Alarm
- 1. Select either Morning call, Alarm1 or Alarm2 by pressing the Up or Down key.
- 2. Press the Select soft key.
- 3. Press the Options soft key.
- 4. Scroll to an option by pressing the Up or Down key and press the Select soft key. Change the setting, as needed.
- 5. Repeat step 4 to change each setting.
- 6. When you have finished, press the soft key or the key to exit.
- 1. Scroll to Auto power on the Alarm list and press the Select soft key.
- 2. If necessary, press the Up or Down key to select On.
- 3. Press the Select soft key to save the setting.
- 4. When you have finished, press the soft key or the key to exit.
- Calculator
- 1. Enter the first number using the number keys.
- 2. Press the key to enter a decimal point (.) or the key to enter the appropriate arithmetic symbol: + (add), - (subtract), (multiply), / (divide), % (remainder), ( or ).
- 3. Enter the second figure.
- 4. Repeat steps 2 and 3, if necessary.
- 5. Press the Equal soft key to view the result.
- 6. When you have finished, press the soft key or the key to exit.
- Conversion
- 1. Scroll to the type of conversion to be performed from Currency, Length, Weight, Volume, Area and Temperature, and press the Select soft key.
- 2. Enter the value to be converted and press the Down key to move to the From field.
- 3. Select the original unit by pressing the Left or Right key and press the Down key to move to the To field.
- 4. Select the required unit by pressing the Left or Right key.
- 5. Press the Ok soft key or the key to view the result.
- 6. When you have finished, press the soft key or the key to exit.
- Timer
- Stopwatch
- New memo
- Using ALS (Alternate Line Service)
- Solving problems
- Access codes
- Health and safety information
- Glossary
- Index
- Quick reference card