Samsung Bd Jm57C Users Manual
2015-11-13
: Samsung Samsung-Bd-Jm57C-Users-Manual-820132 samsung-bd-jm57c-users-manual-820132 samsung pdf
Open the PDF directly: View PDF 
.
Page Count: 30
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
Blu-ray™ Disc Player
BD-JM57
BD-JM57C
Safety Information
Warning
This symbol indicates that
high voltage is present
inside. It is dangerous to
make any kind of contact
with any internal part of
this product.
This symbol indicates
that important literature
concerning operation
and maintenance has
been included with this
product.
RISK OF ELECTRIC SHOCK. DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
THE COVER (OR BACK). THERE ARE
NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED
PERSONNEL.
● The slots and openings in the cabinet and
in the back or bottom are provided for
necessary ventilation. To ensure reliable
operation of this apparatus, and to
protect it from overheating, these slots
and openings must never be blocked or
covered.
- Do not place this apparatus in a
confined space, such as a bookcase,
or built-in cabinet, unless proper
ventilation is provided.
- Do not place this apparatus near or
over a radiator or heat register, or
where it is exposed to direct sunlight.
- Do not place vessels (vases etc.)
containing water on this apparatus. A
water spill can cause a fire or electric
shock.
● Do not expose this apparatus to rain
or place it near water (near a bathtub,
washbowl, kitchen sink, or pool, etc.).
If this apparatus accidentally gets wet,
unplug it and contact an authorized dealer
immediately.
● This apparatus uses batteries. In your
community, there might be environmental
regulations that require you to dispose of
these batteries properly. Please contact your
local authorities for disposal or recycling
information.
● Do not overload wall outlets, extension
cords or adaptors beyond their capacity,
since this can result in fire or electric
shock.
● Route power-supply cords so that they
are not likely to be walked on or pinched
by items placed on or against them. Pay
particular attention to cords at the plug
end, at wall outlets, and the point where
they exit from the apparatus.
● To protect this apparatus from a lightning
storm, or when it is left unattended and
unused for long periods of time, unplug
it from the wall outlet and disconnect the
antenna or cable system. This will prevent
damage to the set due to lightning and
power line surges.
● Before connecting the AC power cord
to the DC adaptor outlet, make sure the
voltage designation of the DC adaptor
corresponds to the local electrical supply.
● Never insert anything metallic into the
open parts of this apparatus. Doing so
may create a danger of electric shock.
● To avoid electric shock, never touch the
inside of this apparatus. Only a qualified
technician should open this apparatus.
● Make sure to plug the power cord in
until it is firmly seated. When unplugging
the power cord from a wall outlet,
always pull on the power cord's plug.
Never unplug by pulling on the power
cord. Do not touch the power cord with
wet hands.
● If this apparatus does not operate
normally - in particular, if there are any
unusual sounds or smells coming from it
- unplug it immediately and contact an
authorized dealer or service center.
● Maintenance of Cabinet.
- Before connecting other components to
this product, be sure to turn them off.
- If you move your product suddenly
from a cold place to a warm place,
condensation may occur on the
operating parts and lens and cause
abnormal disc playback. If this occurs,
unplug the product, wait for two hours,
and then connect the plug to the power
outlet. Then, insert the disc, and try to
play back again.
● Be sure to pull the power plug out of the
outlet if the product is to remain unused
or if you are leaving the house for an
extended period of time (especially when
children, elderly, or disabled people will
be left alone in the house).
- Accumulated dust can cause an
electric shock, an electric leakage,
or a fire by causing the power cord
to generate sparks and heat or the
insulation to deteriorate.
● Contact an authorized service center for
information if you intend to install your
product in a location with heavy dust,
high or low temperatures, high humidity,
chemical substances, or where it will
operate 24 hours a day such as in an
airport, a train station, etc. Failing to do
so may lead to serious damage to your
product.
● Use only a properly grounded plug and
wall outlet.
- An improper ground may cause
electric shock or equipment damage.
(Class l Equipment only.)
● To turn this apparatus off completely,
you must disconnect it from the wall
outlet. Consequently, the wall outlet and
power plug must be readily accessible at
all times.
● Do not allow children to hang on the
product.
● Store the accessories (battery, etc.) in
a location safely out of the reach of
children.
● Do not install the product in an unstable
location such as a shaky self, a slanted
floor, or a location exposed to vibration.
● Do not drop or strike the product. If the
product is damaged, disconnect the
power cord and contact a service center.
● To clean this apparatus, unplug the power
cord from the wall outlet and wipe the
product using a soft, dry cloth. Do not
use any chemicals such as wax, benzene,
alcohol, thinners, insecticide, air fresheners,
lubricants, or detergent. These chemicals
can damage the appearance of the product
or erase the printing on the product.
● Do not expose this apparatus to dripping
or splashing. Do not put objects filled
with liquids, such as vases on the
apparatus.
● Do not dispose of batteries in a fire.
● Do not plug multiple electric devices
into the same wall socket. Overloading a
socket can cause it to overheat, resulting
in a fire.
● There is danger of an explosion if you
replace the batteries used in the remote
with the wrong type of battery. Replace
only with the same or equivalent type.
● WARNING - TO PREVENT
THE SPREAD OF FIRE,
KEEP CANDLES AND
OTHER ITEMS WITH OPEN
FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
● WARNING
- This product contains chemicals known
to the State of California to cause
cancer and reproductive toxicity.
- To reduce the risk of fire or electric
shock, do not expose this appliance to
rain or moisture.
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio or television reception, which can
be determined by turning the equipment
off and on.
The user is encouraged to try to correct
the interference by one or more of the
following measures:
● Reorienting or relocating the receiving
antenna.
● Increasing the separation between the
equipment and receiver.
● Connecting this equipment to an outlet
that is on a different circuit than the one
the receiver is connected to.
● Consulting the dealer or an experienced
radio/TV technician for help.
This class B digital product meets all
requirements of the Canadian Interference -
Causing Equipment Regulations
This reminder is provided to call the CATV
system installer's attention to Article 820-
40 of the National Electrical Code (Section
54 of Canadian Electrical Code, Part I) that
provides guidelines for proper grounding
and, in particular, specifies that the cable
ground shall be connected to the grounding
system of the building as close to the point
of cable entry as practical.
This Compact Disc player is classified as a
CLASS 1 LASER product. Use of controls,
adjustments or performance of procedures
other than those specified herein may result
in hazardous radiation exposure.
Complies with 21CFR 1040.10 except for
deviations pursuant to Laser Notice No. 50,
dated June 24, 2007.
● VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. AVOID DIRECT EXPOSURE
TO BEAM. (FDA 21 CFR)
● CLASS 3B VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. AVOID
EXPOSURE TO THE BEAM. (IEC 60825-1)
● THIS PRODUCT UTILIZES A LASER. USE
OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVER
AND DO NOT REPAIR YOURSELF. REFER
SERVICING TO QUALIFIED PERSONNEL.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LÁSER CLASE 1
✎
■ If the Region number of a Blu-ray
Disc/DVDs does not correspond to
the Region number of this player,
the player cannot play the disc.
Precautions
Read these operating instructions carefully
before using the unit. Follow all the safety
instructions listed below.
Keep these operating instructions handy for
future reference.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including AV receivers)
that produce heat.
Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or
the third prong are provided for your
safety. If the provided plug does not fit
into your outlet, consult an electrician
for replacement of the obsolete outlet.
Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and the
point where it exits the apparatus.
Only use attachments/accessories
specified by the manufacturer.
Use only with the
cart, stand, tripod,
bracket, or table
specified by the
manufacturer,
or sold with the
apparatus. When
a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Unplug this apparatus during lightning
storms or when unused for long periods
of time.
Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as when the power-supply
cord or plug is damaged, liquid has
been spilled or objects have fallen into
the apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
Warning ...............................................
Precautions ..........................................
Before using the User Manual ..............
Logos of Discs the player can play .........
Accessories ..........................................
Front Panel ..........................................
Rear Panel ...........................................
Remote Control ...................................
Connecting to a TV ..............................
Connecting to an Audio System ...........
Connecting to a Network Router ..........
The Setup Procedure ..........................
Wired Network ..................................
Wireless Network ...............................
Menu Navigation ...............................
Accessing the Settings Menu ..............
Picture Settings ..................................
Sound Settings ...................................
Network Settings ...............................
System Settings ..................................
Language Settings .............................
Security Settings.................................
General Settings ................................
Support Settings ................................
Playing a Commercially Recorded
Disc .................................................
Playing Files on a USB Device ..............
Playing a Disc with User Recorded
Content .............................................
Using DLNA .......................................
Controlling Video Playback .................
Controlling Music Playback .................
Playing Photo Contents ......................
Using Netflix ......................................
Using Pandora ...................................
Using YouTube ...................................
Troubleshooting .................................
Specifications .....................................
Getting Started
Before using the User Manual
VIDEO
Blu-ray Disc BD-ROM or BD-RE/-R recorded in the BD-RE format.
DVD-VIDEO
DVD-RW
DVD-R
DVD+RW
DVD+R
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-
R/+R that have been recorded and finalized, or
a USB storage media containing MKV or MP4
contents.
MUSIC
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Music recorded on CD-RW/-R, DVD-RW/-R, BD-
RE/-R or a USB storage media containing MP3 or
WMA contents.
PHOTO
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-
RE/-R or a USB storage media containing JPEG
contents.
✎
■ The player may not play certain CD-RW/-R and DVD-R because of the disc type or
recording conditions.
■ If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.
■ Your player will not play content that has been recorded on a DVD-R at a bit-rate
that exceeds 10 Mbps.
■ Your player will not play content that has been recorded on a BD-R or USB device
at a bitrate that exceeds 25 Mbps.
■ Playback may not work for some types of discs, or when you use specific functions,
such as angle change and aspect ratio adjustment. Information about the discs is
written in detail on the disc box. Please refer to this if necessary.
■ When you play a BD-J title, loading may take longer than a normal title or some
functions may perform slowly.
● HD DVD
● DVD-ROM/PD/
MV, etc
● DVD-RAM
● Super Audio CD
(except CD layer)
● DVD-RW (VR mode)
● CVD/CD-ROM/CDV/
CD-G /CD-I / LD
(CD-Gs play audio
only, not graphics.)
● 3.9 GB DVD-R
for Authoring.
Contents
Both players and discs are coded by region.
These regional codes must match for a disc
to play. If the codes do not match, the disc
will not play.
The Region Code for this player is displayed on
the rear panel of the player.
A
North America, Central
America, South America,
Korea, Japan, Taiwan, Hong
Kong and South East Asia.
B
Europe, Greenland,
French territories, Middle
East, Africa, Australia and
New Zealand.
C
India, China, Russia,
Central and South Asia.
The U.S., U.S. territories and
Canada
Europe, Japan, the Middle
East, Egypt, South Africa,
Greenland
Taiwan, Korea, the
Philippines, Indonesia,
Hong Kong
Mexico, South America,
Central America,
Australia, New Zealand,
Pacific Islands, Caribbean
Russia, Eastern Europe, India,
most of Africa, North Korea,
Mongolia
China
Logos of Discs the player can
play
Blu-ray Disc BD-LIVE
NTSC broadcast system in U.S.A, Canada,
Korea, Japan
● Your player supports USB storage media,
MP3 players, digital cameras, and USB
card readers.
● The player does not support folder or file
names longer than 128 characters.
● Some USB/External HDD/digital camera
devices may not be compatible with the
player.
● Your player supports the FAT16, FAT32,
and NTFS file systems.
● Connect USB devices directly to the player’s
USB port. Connecting through a USB cable
may cause compatibility problems.
● Inserting more than one memory device
into a multi-card reader may cause the
reader to operate improperly.
● The player does not support the PTP
protocol.
● Do not disconnect a USB device while it
is transferring, playing, or recording files.
● The bigger the image resolution, the
longer the image takes to display.
● This player cannot play MP3 files with DRM (Digital Rights Management) downloaded
from commercial sites.
● Your player only supports video with a frame rate under 30fps (frames per second).
● Your player only supports USB Mass Storage Class (MSC) devices such as thumb drives
and USB HDD. (HUB is not supported.)
● Certain USB HDD Devices, multi-card readers and thumb drives may not be compatible
with this player.
● If some USB devices require excessive power, they may be limited by the circuit safety
device.
● If playback from a USB HDD is unstable, provide additional power by plugging the HDD
into a wall socket.
If the problem continues, contact the USB HDD manufacturer.
● SAMSUNG is not responsible for any data file damage or data loss.
● Your player does not support NTFS compressed files, sparse files, or encrypted files.
● You can repair or format a USB device on your Desktop PC. (MS-Windows OS only)
Supported Video File Formats
*.avi AVI
MP4v3 MP3
Dolby Digital
DTS
WMA
PCM
1920x1080
H.264 BP/MP/HP 1920x1080
*.mkv MKV
VC-1 AP MP3
Dolby Digital
DTS
1920x1080
H.264 BP/MP/HP 1920x1080
*.wmv WMV (wmv9) VC-1 AP WMA 1920x1080
VC-1 SM 1920x1080
*.mp4 MP4 MP4 (mp4v) AAC 1920x1080
H.264 BP/MP/HP 1920x1080
*.mpg
*.mpeg MPEG
MPEG1 MP1, 2
Dolby Digital
DTS
1920x1080
MPEG2 1920x1080
H.264 BP/MP/HP 1920x1080
•
-Even when a file is encoded by a supported codec listed above, the file might not be
played if its content has a problem.
-Normal playback is not guaranteed if the file’s container information is wrong or the
file itself is corrupted.
-Files having a higher Bit rate/frame rate than standard may stutter during sound/video
playback.
-The Seek (skip) function is not available if the file’s index table is damaged.
•
-Supports up to H.264 Level 4.1 and AVCHD
-Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4
-MPEG4 SP, ASP :
Below 1280 x 720 : 60 frames max
Above 1280 x 720 : 30 frames max
-Does not support GMC 2 or higher
•
-Supports WMA 7, 8, 9 and STD
-Does not support WMA sampling rate of 22050Hz mono.
-AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96)
Max bitrate: 320kbps
Supported Music File Formats
*.mp3 MP3 MP3 -
*.wma WMA WMA
* Sampling rates (in kHz) - 8, 11, 16, 22, 32,
44.1, 48
* Bit rates - All bit-rates from 5kbps to 355kbps
Supported Picture File Formats
*.jpg
*.jpeg
*.jpe
JPEG 15360x8640
*.png PNG 15360x8640
● This player can play back AVCHD format discs. These discs are normally recorded and
used in camcorders.
● The AVCHD format is a high definition digital video camera format.
● The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the
conventional image compressing format.
● Some AVCHD discs use the "x.v.Color" format. This player can play back AVCHD discs
that use the "x.v.Color" format.
● "x.v.Color" is a trademark of Sony Corporation.
● "AVCHD" and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co.,
Ltd. and Sony Corporation.
✎
■ Some AVCHD format discs may not play, depending on the recording condition.
AVCHD format discs need to be finalized.
■ "x.v.Color" offers a wider color range than normal DVD camcorder discs
.
Accessories
The following accessories are included with your Blu-ray player:
SCREEN
VIEW A-B
FULLBONUS REPEAT REPEAT
HDMI Cable
(BD-JM57C Only)
(BN39-01583A)
Batteries for
Remote Control
(AAA Size)
(4301-000115)
User Manual
(AK68-02605A)
Remote Control
(AK59-00149A)
Front Panel
✎
■ You can perform software upgrades using the USB Host jack with a USB flash
memory stick only.
■ Please open and pull out the USB cover before inserting USB device.
Rear Panel
Remote Control
SCREEN
VIEW A-B
FULLBONUS REPEAT REPEAT
Turn the player on and off.
Allows you to play selected portions of a
disc repeatedly.
Press the number buttons to operate options.
Press to open and close the disc tray.
Use to enter the disc menu.
Press to skip backwards or forwards.
Press to stop a disc.
Press to use the bonusview function.
Return to the previous menu.
These buttons are used both for menus on the
player and also several Blu-ray Disc functions.
Use to select menu items and change
menu values.
Press to use the Tools menu.
Use to access various audio functions on
a disc (Blu-ray Disc/DVD).
Press to play a disc.
Press to pause a disc.
Turn the TV on and off.
(This button is only available for Samsung TVs,)
Press to switch the Blu-ray Disc/DVD’s
subtitle language.
Use to enter the popup menu/title menu.
Press to search a disc backwards or
forwards.
Press to move to the Home menu.
Press to see the full screen on a TV.
During Blu-ray Disc/DVD playback, the
Full Screen button does not operate.
Press to exit the menu.
Use to display the playback information
when playing a Blu-ray Disc/DVDs.
Allows you to repeat a title, chapter,
track, or disc.
TV volume adjustment.
(This button is only available for Samsung TVs,)
After setup, allows you to set the input
source on your TV.
(This button is only available for Samsung TVs,)
●Check if the remote sensor is blocked by
obstacles.
●Check if there is any fluorescent lighting
nearby
.
!
■ Dispose of batteries according to local
environmental regulations. Do not put them
in the household trash.
■ Do not dispose of batteries in a fire.
■ Do not short circuit, disassemble or
overheat the batteries.
■ Danger of explosion if batteries are
incorrectly replaced. Replace only with the
same or equivalent type.
✎
■ If the remote does not operate properly:
●Check the polarity (+/–) of the batteries.
●Check if the batteries are drained.
Connections
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back
of the product to the HDMI IN jack on your TV.
-Do not connect the power cord to the wall outlet until you have made all
the other connections.
-When you change the connections, turn off all devices before you start.
Audio
Video
✎
■ If you use an HDMI-to-DVI cable to connect to your display device, you must also
connect the Digital Audio Out on the player to an audio system to hear audio.
■ An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
■ Depending on your TV, certain HDMI output resolutions may not work. Please refer
to the user manual of your TV.
■ When you connect the player to your TV using an HDMI cable or to a new TV, and
then turn it on for the first time, the player automatically sets the HDMI output
resolution to the highest supported by the TV.
■ A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to
Off in the menu.
■ To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a
high speed HDMI cable.
■ HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection),
random noise appears on the screen
.
Connecting to an Audio System
You can connect the Blu-ray player to an audio system using one of the
methods illustrated below.
-Do not connect the power cord to the wall outlet until you have made all
the other connections.
-When you change the connections, turn off all devices before you start.
●
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back
of the product to the HDMI IN jack on your receiver.
●
Best quality (Recommended)
●
Using a digital Coaxial cable (not supplied), connect the Coaxial Digital
Audio Out jack on the product to the Digital Coaxial In jack of the receiver.
●
Good quality
●
You will hear sound only through the front two speakers with Digital Output
set to PCM.
AudioAudio
Connecting to a Network Router
You can connect your player to your network router using one of the methods
illustrated below.
To use DLNA network functionality, you must connect your PC to your network
as shown in the illustrations.
The connection can be wired or wireless.
Or
✎
■ Internet access to Samsung's software update server may not be allowed,
depending on the router you use or your ISP's policy. For more information, contact
your ISP (Internet Service Provider).
■ DSL users, please use a router to make a network connection.
✎
■ If your wireless router supports DHCP, this player can use a DHCP or static IP
address to connect to the wireless network.
■ Set your wireless router to Infrastructure mode. Ad-hoc mode is not supported.
■ The player supports only the following wireless security key protocols:
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
■ Select a channel on the wireless router that is not currently being used. If the
channel set for the wireless router is currently being used by another device
nearby, it will result in interference and communication failure.
■ In compliance with the newest Wi-Fi certification specifications, Samsung
Blu-ray players do not support WEP, TKIP, or TKIP-AES (WPS2 Mixed) security
encryption in networks running in the 802.11n mode.
■ Wireless LAN, by its nature, may cause interference, depending on the
operating conditions (router performance, distance, obstacles, interference by
other radio devices, etc).
Settings
The Setup Procedure
~
The Home screen will not appear if
you do not configure the Setup.
~
The OSD (On Screen Display) may
change in this player after you upgrade
the software version.
~
The access steps may differ
depending on the menu you
selected.
~
After the Setup process is complete,
you can then operate the panel
buttons and remote control.
After you have connected the player
to your TV, turn on the TV and
player. When you turn on the player
the first time, the player's Setup
screen appears on the TV. The Setup
procedure lets you set the On Screen
Display (OSD) and menu languages,
the aspect ratio (screen size), the
network type, and connect the player
to your network.
To run the Setup procedure, follow
these steps:
Plug in the Blu-ray player, turn on
your TV, and then turn on the Blu-
ray player by pressing the
button on the remote. The Setup
Language screen appears.
>
"
Setup I On-Screen Language
Select the desired language,
and then press the v button.
The Start screen appears.
a
"
Press the v button. The TV
Aspect screen appears.
On the TV Aspect screen, select
the desired TV Aspect Ratio, and
then press the v button. The
Network screen appears.
✎
■ An explanation of each Aspect Ratio
appears on the screen. Highlight
each choice to see each explanation.
If you have an HDTV, we suggest
you choose 16:9 original.
If you have connected a LAN
cable to the Blu-ray player, Initial
Setup defaults to Wired Network.
Go to the Wired Network section
below. If you have not connected
a LAN cable, Initial Setup defaults
to Wireless Network. Go to the
Wireless Network section in the
next column
✎
■ If you have no network, select Skip
by pressing the button,
and then go to Step 6.
The Setup Complete window
appears and remains on the
screen for a few moments. Then,
the Home screen appears.
Wired Network
The Blu-ray player automatically
verifies your wired network.
a
d
m
"
After the player verifies the
network, press the v button.
Go to Step 6 of The Setup
Procedure above.
Wireless Network
The Blu-ray player automatically
searches for and then lists all wireless
networks that are within range.
a d m "
Select a network, and then press the
v button. The keyboard appears.
a d m "
Enter security key. 0 / 64
Caps 1 2 3 4 5 6 7 8 9 0
Clear
q w e r t y u i o p ^ *
123#& a s d f g h j k l ~ @ !
z
x c v b n m , . ? -Cancel
◀ ▶
"
Select
'
Return
Security Key
If your network has a password, use
the keyboard to enter it. Press the
number buttons on your remote to
enter numbers. Use the keyboard to
enter letters. When finished, use the
▲▼◀▶ buttons to select Done, and
then press the v button.
If you have no password, go to Step 4.
After the player verifies the
network, press the v button.
Go to Step 6 of The Setup
Procedure on the previous page.
✎
■ The Home screen will not appear if
you do not configure the player's
settings during Setup, except as
noted below.
■ If you press the button
during network setup, you can
access the Home screen even if the
network setup is not completed yet.
■ If you do not complete network set
up during the Initial Setup, you can
do it later. See page 14.
■ When you return to the Home
screen, the full screen mode is
cancelled automatically.
■ If you want to display the Setup
screen again to make changes, press
the
^
button on the front panel of
the player for more than 5 seconds
with no disc inserted. This resets the
player to its default settings.
■ After the Setup process is complete, you
can operate the HDMI-CEC function.
■ If you want to use an Anynet+
(HDMI-CEC) function to aid in the
initial set up process, please follow
the instructions below.
1) Connect the player to an
Anynet+(HDMI-CEC) compliant
Samsung TV using an HDMI Cable.
2)
Set the Anynet+(HDMI-CEC) feature
to On in both the TV and the player.
3)
Set the TV to the Setup Procedure.
■ If you leave the player in the stop
mode for more than 5 minutes
without using it, a screen saver will
appear on your TV. If the player is
left in the screen saver mode for
more than 25 minutes, the power
will automatically turn off.
Menu Navigation
SCREEN
VIEW A-B
FULLBONUS REPEAT REPEAT
1
24
3
1
Button : Press to move to
the Home menu.
2
Button : Return to the
previous menu.
3
v Button :
Move the cursor or select an item.
Activate the currently selected item.
Confirm a setting.
4
Button : Press to exit the
current menu.
●
No Disc
2
3
6
5
7
1
4
8
1
Access and play VIDEOS.
2
Access and play MUSIC.
3
Access and change SETTINGS.
4
Change the Source Device.
5
Access and view PHOTOS.
6
Play a DISC.
7
Access and use APPLICATIONS.
8
Access MORE APPLICATIONS.
✎
■ The Videos, Photos, and Music
options require that you have an
appropriate disc in the player or a USB
flash device attached to the player.
Accessing the Settings Menu
To access the Settings menu and sub-
menus, follow these steps:
Press the POWER button.
The Home Menu appears.
Press the ▲▼◀▶ buttons to
select Settings, and then press the
v button.
Press the ▲▼ buttons to select
the desired submenu, and then
press the v button.
Press the ▲▼ buttons to select
the desired item, and then press
the v button.
Press the EXIT button to exit the
menu.
✎
■ The access steps may differ depending
on the menu you selected. The OSD
(On Screen Display) may change in
this player after you upgrade the
software version.
Picture Settings
You can configure various display
options such as the TV Aspect Ratio,
Resolution, etc.
Depending on the type of television
you have, you may want to adjust the
screen size setting.
✎
■ Depending on the disc type, some
aspect ratios may not be available.
■ If you select an aspect ratio and
option which is different than the
aspect ratio of your TV screen, the
picture might appear to be distorted.
BD Wise is Samsung’s latest inter-
connectivity feature.
When you connect a Samsung player
and a Samsung TV with BD Wise to
each other via HDMI, and BD Wise
is on in both the player and TV, the
player outputs video at the video
resolution and frame rate of the Blu-
ray Disc/DVD.
✎
■ When BD Wise is on, the Resolution
setting automatically defaults to BD
Wise and BD Wise appears in the
Resolution menu.
■ If the player is connected to a device
that does not support BD Wise, you
cannot use the BD Wise function.
■ For the proper operation of BD
Wise, set the BD Wise menu of
both the player and the TV to
.
Lets you set the output resolution
of the HDMI video signal to Auto,
1080p, 1080i, 720p, or 480p. The
number indicates the number of
lines of video per frame. The i and p
indicate interlaced and progressive
scan, respectively. The more lines, the
higher the quality.
●
BD Wise Resolution of
Blu-ray Disc 1080p
Auto
Max.
Resolution of
TV input
Max.
Resolution of
TV input
1080p@60F
(Movie Frame :
Off)
1080p@60F 1080p@60F
Movie Frame :
Auto (24Fs) 1080p@24F 1080p@24F
1080i 1080i 1080i
720p 720p 720p
480p 480p 480p
●
BD Wise 480i
Auto Max. Resolution of TV
input
1080p 1080p
1080i 1080i
720p 720p
480p 480p
✎
■ If the TV you connected to the player
does not support Movie Frame or
the resolution you selected, the
message "If no pictures are shown
after selecting ‘Yes’, please wait for
15 seconds to return to the previous
resolution." appears. If you select
, the TV’s screen will go blank for
15 seconds, and then the resolution
will revert to the previous resolution
automatically.
■ If the screen stays blank after you have
changed the resolution, remove all
discs, and then press and hold the ^
button on the front of the player for
more than 5 seconds. All settings are
restored to the factory default. Access
the Resolution function and reset the
output resolution to a resolution that
is compatible with your TV.
■ When the factory default settings
are restored, all stored user BD data
is deleted.
■ The Blu-ray Disc must have the 24
frame feature for the player to use
the Movie Frame (24Fs) mode.
Setting the Movie Frame (24Fs) feature
to Auto allows you to adjust the
player’s HDMI output to 24 frames per
second for improved picture quality.
You can enjoy the Movie Frame (24Fs)
feature only on a TV supporting this
frame rate. You can select Movie
Frame only when the player is in the
HDMI 1080p output resolution mode.
Lets you set the color space format
for HDMI output to match the
capabilities of the connected device
(TV, monitor, etc).
Lets you output video from the HDMI
OUT jack with Deep Color. Deep
Color provides more accurate color
reproduction with greater color depth.
Lets you improve picture quality when
viewing DVDs.
Sound Settings
Lets you select the digital audio output
format that is suitable for your TV or AV
Receiver. For more details, please refer
to the Digital Output Selection table on
the next page.
Blu-ray Discs may include three audio streams :
-Main Feature Audio : The audio
soundtrack of the main feature.
-BONUSVIEW audio : An additional
soundtrack such as the director or actor’s
commentary.
-Navigation Sound Effects : When you
choose a menu navigation selection, a
Navigation Sound Effect may sound.
Navigation Sound Effects are different
on each Blu-ray Disc.
✎
■ Be sure to select the correct Digital
Output or you will hear no sound or
just loud noise.
■ If the HDMI device (AV receiver, TV)
is not compatible with compressed
formats (Dolby Digital, DTS), the
audio signal outputs as PCM.
■ Regular DVDs do not have
BONUSVIEW audio and Navigation
Sound Effects.
■ Some Blu-ray Discs do not have
BONUSVIEW audio and Navigation
Sound Effects.
■ If you play MPEG audio soundtracks,
the audio signal outputs as PCM
regardless of your Digital Output
selections (PCM or Bitstream).
■ If your TV is not compatible with
compressed multi-channel formats
(Dolby Digital, DTS), the player may
output PCM 2ch downmixed audio
even though you selected Bitstream
(either Re-encoded or Unprocessed)
in the setup menu.
■ If your TV is not compatible with
PCM sampling rates over 48kHz,
the product will output at 48kHz
downsampled PCM audio even
though you set PCM Downsampling
to Off.
Audio
Stream on
Blu-ray
Disc
PCM Up to
7.1ch
PCM 2ch
PCM
PCM 2ch
Re-encoded
DTS
Re-encoded
Dolby Digital *
Dolby
Digital
PCM 2ch PCM 2ch
Dolby
Digital
Dolby
Digital
Re-encoded
DTS
Re-encoded
Dolby Digital *
Dolby
Digital Plus
PCM 2ch PCM 2ch
Dolby
Digital Plus
Dolby
Digital
Re-encoded
DTS
Re-encoded
Dolby Digital *
Dolby
TrueHD
PCM 2ch PCM 2ch
Dolby
TrueHD
Dolby
Digital
Re-encoded
DTS
Re-encoded
Dolby Digital *
DTS
PCM 2ch PCM 2ch
DTS DTS Re-encoded
DTS
Re-encoded
Dolby Digital *
DTS-HD High
Resolution
Audio
PCM 2ch PCM 2ch
DTS-HD High
Resolution
Audio
DTS Re-encoded
DTS
Re-encoded
Dolby Digital *
DTS-HD
Master
Audio
PCM 2ch PCM 2ch
DTS-HD
Master
Audio
DTS Re-encoded
DTS
Re-encoded
Dolby Digital *
Audio
Stream on
DVD
PCM
PCM 2ch PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch PCM 2ch
Dolby Digital
PCM 2ch PCM 2ch
Dolby Digital Dolby Digital
Dolby Digital Dolby Digital
DTS
PCM 2ch PCM 2ch
DTS DTS DTS DTS
Definition
for
Blu-ray
Disc
Any
Decodes main
feature audio and
BONUSVIEW audio
stream together
into PCM audio and
adds Navigation
Sound Effects.
Outputs only main
feature audio stream
so that your AV
receiver can decode
the audio bitstream.
You will not hear
BONUSVIEW audio
and Navigation
Sound Effects.
Decodes main
feature audio
and BONUSVIEW
audio stream
together into PCM
audio and adds
Navigation Sound
Effects, then re-
encodes the PCM
audio into DTS
bitstream
Decodes main
feature audio
and BONUSVIEW
audio stream
together into PCM
audio and adds
Navigation Sound
Effects, then re-
encodes the PCM
audio into Dolby
Digital bitstream
*If Source Stream is 2ch, "Re-encoded Dolby D" Settings are not applied.
Lets you choose to have 96KHz PCM
signals downsampled to 48KHz
before they are outputted to an
amplifier. Choose if your amplifier
or receiver is not compatible with a
96KHz signal.
Lets you apply dynamic range control
to Dolby Digital, Dolby Digital Plus,
and Dolby TrueHD audio.
●
: Automatically controls the
dynamic range of Dolby TrueHD
audio, based on information in the
Dolby TrueHD soundtrack.
Also turns dynamic range control on
for Dolby Digital and Dolby Digital Plus.
●
: Leaves the dynamic range
uncompressed, letting you hear the
original sound.
●
: Turns dynamic range control
on for all three Dolby formats.
Quieter sounds are made louder
and the volume of loud sounds is
reduced.
Lets you select the multi-channel
downmix method that is compatible
with your stereo system. You can choose
to have the player downmix to normal
stereo or to surround compatible stereo.
Network Settings
When you connect this player to a
network, you can use network based
applications and functions such as BD-
LIVE (see page 16), Netflix, Pandora,
and YouTube (see pages 23~25). You
can also use the network connection
to upgrade the player's software (see
page 18). Instructions for configuring
the network connection start below
.
Before you begin, contact your ISP to find
out if your IP address is static or dynamic.
If it is dynamic, and you have a wired or
wireless network, we recommend using
the Automatic configuration procedures
described below.
If you are connecting to a wired
network, connect the player to your
router using a LAN cable before you
start the configuration procedure.
If you are connecting to a wireless
network, disconnect any wired
network connections before you begin.
To begin configuring your network
connection, follow the steps
beginning below.
Ğ
In the Home screen, select ,
and then press the v button.
Use the number keypad on your
remote control to enter the
numbers for the parameter. Use
the ◀▶ buttons on the remote
control to move from entry field to
entry field within a parameter.
When done with one
parameter
,
press the v button.
Press the ▲ or ▼ button to move to
another
parameter
, and then enter
the numbers for that
parameter
following the instructions in Step 5.
Repeat Steps 5 and 6 until you
have filled in all
parameter
s.
✎
■ You can get the Network parameters
from your Internet provider.
When finished entering all the
parameter
s, press the or
button. The player verifies
the network connection, and then
connects to the network.
You can setup a wireless network
connection in four ways:
-Wireless Automatic
-Wireless Manual
-WPS(PBC)
-WPS(PIN)
When you configure the wireless
network connection, any wireless
network devices currently connected
through the player or, if applicable,
the player's current wired connection,
will be disconnected.
Ğ
In the Home screen, select
, and then press the v
button.
Select , and then press
the v button.
Select , and then
press the v button.
Select in the Network
Settings screen, and then press
the v button. The player
searches for and then displays a
list of the available networks.
m "
'
Select the desired network, and
then press the v button.
On the Security screen, enter your
network's Security Code or Pass
Phrase.
Enter numbers directly using the
number buttons on your remote
control. Enter letters by selecting
a letter with an arrow button, and
then pressing v button.
When finished, select and then
press the v button. The player
verifies the network connection and
then connects to the network.
Select , and then press
the v button.
Select , and then
press the v button.
Select in the Network
Settings screen, and then press
the v button.
Select the button, and then
press the v button. The product
detects the wired connection,
verifies the network connection,
and then connects to the network.
Ğ
If you have a static IP address or
the Automatic procedure does not
work, you'll need to set the Network
Settings values manually.
Follow Steps 1 and 2 in Wired -
Automatic, and then follow these
steps:
Select . The player
searches for a network, and then
displays the connection failed
message.
On the bottom of the screen,
select , and then press
the v button.
The IP Settings screen appears.
Select the IP Setting field, and
then press the v button.
Select in the IP
Setting field, and then press the
v button.
Select a parameter to enter (
, for example), and then
press the v button.
When verification is complete,
select , and then press the v
button.
✎
■ You should be able to find the
Security Code or Pass Phrase on
one of the set up screens you used
to set up your router or modem.
Ğ
If you have a static IP address or
the Automatic procedure does not
work, you'll need to set the Network
Settings values manually.
Follow the directions in Wireless -
Automatic through Step 5.
The player tries to connect to the
network, and then displays the
connection failed message.
On the bottom of the screen,
select , and then press
the v button.
The IP Settings screen appears.
Select the IP Setting field, and
then press the v button.
Select in the IP
Setting field, and then press the
v button.
Select a parameter to enter (
, for example), and then
press v button. Use the number
keypad on your remote control to
enter the numbers for the parameter.
Use the ◀▶ buttons on the remote
control to move from entry field to
entry field within a parameter.
The player searches for and then
displays a list of the available
networks.
Select the desired network, and
then press the ▶ button.
Select the , and then
press the v button. The PIN
pop-up appears.
Enter the PIN into the WPS PIN entry
field in the router's Set Up screen
and then save the the screen.
✎
■ Contact the manufacturer of the
router for instructions explaining
how to access the router's Set Up
screens or refer to the router's
user's manual.
■ For WPS connection, set your
wireless router’s security encryption
to AES. WPS does not support WEP
security encryption.
Use this menu item to check whether
your network connection is working
or not.
Use to check whether a connection to
a network and the Internet has been
established.
When done with one parameter,
press the v button.
Press the ▲ or ▼ button to move to
another
parameter
, and then enter
the numbers for that
parameter
following the instructions in Step 6.
Repeat Steps 6 and 7 until you
have filled in all
parameter
s.
✎
■ You can get the Network parameters
from your Internet provider.
When finished, press the
or button. The Security
Screen appears.
On the Security screen, enter your
network's Security Code or Pass
Phrase. Enter numbers directly using
the number buttons on your remote
control. Enter letters by selecting a
letter with the ▲▼◀▶ buttons, and
then pressing the v button.
When finished, select at the
right of the screen, and then press
the v button.
The player verifies the network
connection and then connects to
the network.
After the player verifies the
network, select , and then
press the v button.
Ğ
In the Home screen, select ,
and then press the v button.
Select , and then press
the v button.
Select , and then
press the v button.
Select in the Network
Settings screen, and then press
the v button.
Press the ▲▼ button on your
remote, and then press the ◀▶
button to select the .
Press the v button on your
remote.
The "Press the PBC button"
message appears.
Press the WPS(PBC) button on your
router within two minutes. Your
player automatically acquires all the
network settings values it needs
and connects to your network.
The Network Status screen
appears. The player connects to
the network after the network
connection is verified.
Ğ
Before you begin, open the router's
setup menu on your PC and access the
screen with the WPS PIN entry field.
In the Home screen, select ,
and then press the v button.
Select , and then press
the v button.
Select , and then
press the v button.
Select in the Network
Settings screen, and then press
the v button.
The Wi-Fi Direct function allows you
to connect Wi-Fi Direct devices to the
player and each other using a peer-to-
peer network, without a wireless router.
✎
■ Some Wi-Fi Direct devices may
not support the DLNA function if
connected via Wi-Fi Direct. If this is
the case, we recommend that you
change the network connection
method you used to connect the
devices.
■ Bluetooth transmissions can
interfere with the Wi-Fi Direct
signal. Before you use the Wi-
Fi Direct function, we strongly
recommend that you turn off the
Bluetooth function of any active
mobile device.
Turn on the Wi-Fi direct device and
activate its Wi-Fi Direct function.
In the Home screen, select
, and then press the v
button.
Select , and then press
the v button.
Select , and then press
the v button.
The Wi-Fi Direct devices that you
can connect to the player appear.
You have three ways to complete
the Wi-Fi connection:
●
Through the Wi-Fi device.
●
Through the player using PBC.
●
Through the player using a PIN.
Each is covered below.
On the Wi-Fi device, follow the
procedure on the device for
connecting to another Wi-Fi
Direct device. See the device's
user manual for instructions.
When you have completed the
procedure, you should see a pop-
up on your TV screen saying that a
device that supports Wi-Fi Direct has
requested to connect. Select , and
then press the v button to accept.
The Connecting pop-up appears,
followed by the Connected pop-
up. When it closes, you should
see the device listed on the Wi-Fi
Direct screen as connected
.
Select the Wi-Fi Direct device you
want to connect to this player,
and then press the v button.
The PBC/PIN pop up appears.
Select , and then press the v
button. The PBC pop-up appears.
Press the PBC button on the Wi-Fi
Direct device within 2 minutes.
The Connecting pop-up appears,
followed by the Connected pop-
up. When it closes, you should
see the device listed on the Wi-Fi
Direct screen as connected
.
Select the Wi-Fi Direct device you
want to connect to this player,
and then press the v button.
The PBC/PIN pop up appears.
Select , and then press the v
button. The PIN pop-up appears.
Note the PIN code in the pop-
up, and then enter it into the
appropriate field in the Wi-Fi Direct
device you want to connect.
The Connecting pop-up appears,
followed by the Connected pop-
up. When it closes, you should
see the device listed on the Wi-Fi
Direct screen as connected.
✎
■ The current wired or wireless
network connection will be
disconnected when you use the
Wi-Fi Direct function.
■ Text files, such as files with a .TXT
or .DOC extension, do not display
when you are using the Wi-Fi Direct
function.
The Device Name function allows
you to change the player's name by
selecting from a device name list.
Set to allow or prohibit an Internet
connection when you use the BD-
LIVE service.
●
: The Internet connection
is allowed for all BD-LIVE contents.
●
: The Internet
connection is allowed only for BD-
LIVE contents containing a valid
certificate.
●
: No Internet connection is
allowed for any BD-LIVE content
.
✎
■
When the player uses BD-LIVE to
send the disc data and a request
to the server to certify the disc,
the server uses the transmitted
data to check if the disc is valid
and sends the certificate back to
the player.
■ The Internet connection may be
restricted while you are using BD-
LIVE contents.
Once the player is connected to
the network, you can enjoy various
movie-related service content using a
BD-LIVE compliant disc.
Attach a USB memory stick to
the USB jack on the front of
the player, and then check its
remaining memory. The memory
device must have at least 1GB of
free space to accommodate the
BD-LIVE services.
Insert a Blu-ray Disc that supports
BD-LIVE.
Select an item from various BD-
LIVE service contents provided by
the disc manufacturer.
✎
■ The way you use BD-LIVE and
the provided contents may
differ, depending on the disc
manufacturer.
DLNA lets you play music, video, and
photo files stored in your PC through
your Blu-ray player.
To use DLNA, you must install DLNA
software or already have DLNA
software installed on your PC and
connect the home theater to your PC
via your network (see pages 14~15).
✎
■ PCs running Windows 7 and
Windows 8 have DLNA software
(Play To) built in.
For instructions explaining how to
play content located on your PC, see
pages 20~23.
System Settings
By using the Setup function, you can set
the language, Network Settings, etc.
For more information about the Setup
function, refer to the Setup section of
this user manual (See page 10).
When set to , Quick Start lets
the player start up more quickly by
decreasing the boot time.
✎
■ If this function is set to , Standby
power consumption will be increased.
Anynet+ is a convenient function that
offers linked operations with other
Samsung products that have the
Anynet+ feature.
To operate this function, connect this
player to an Anynet+ Samsung TV
with an HDMI cable.
With Anynet+ on, you can operate
this player using a Samsung TV remote
control and start disc playback simply
by pressing the ( ) button on
the TV’s remote control.
For more information, please see the
TV user manual.
✎
■ This function is not available if the
HDMI cable does not support CEC.
■ If your Samsung TV has an Anynet+
logo, then it supports the Anynet+
function.
■ Depending on your TV, certain HDMI
output resolutions may not work.
Please refer to the user manual of
your TV.
■ If you have Anynet+ turned on, when
you turn off the product or disconnect
and then reconnect the power cable,
the product turns on automatically to
re-establish the Anynet+ connection.
After about 15 seconds, it turns off
again automatically.
■ Some Samsung TVs, when
connected to this product using the
Anynet+ function will, when you turn
them on, display a warning popup
message saying no connection has
been found. Never-the-less, the
Anynet+ connection is properly
established and available to use.
Enables you to manage the
downloaded contents you accessed
through a Blu-ray disc that supports
the BD-LIVE service and stored on a
flash drive.
You can check the device’s
information including the storage
size, delete the BD data, or change
the Flash memory device.
✎
■ In the external memory mode,
disc playback may be stopped if
you disconnect the USB device in
the middle of playback.
■ Your player supports the FAT16,
FAT32, and NTFS file systems. We
recommend you use USB devices that
support the USB 2.0 protocol with 4
MB/sec or faster read/write speed.
■ The Resume Play function may not
work after you format the storage
device.
■ The total memory available to BD
Data Management may differ,
depending on the conditions.
Language Settings
You can select the language you
prefer for the On-Screen menu, disc
menu, audio, and subtitles.
✎
■ The selected language will only
appear if it is supported on the disc.
Security Settings
When you access this function for
the first time, the PIN screen appears.
Enter the default PIN - 0000 - using
the number buttons. To change the
PIN, use the Change PIN function.
Each time you access the Security
Settings hereafter, you must enter that
four digit PIN. If you don’t change the
PIN, continue using the default PIN.
Prevents playback of Blu-ray Discs
with specific age ratings unless the 4
digit PIN is entered.
This function works in conjunction with
DVDs that have been assigned an age
rating or numeric rating that indicates
the maturity level of the content. These
numbers help you control the types of
DVDs that your family can watch.
Select the rating level you want to
set. For example, if you select Level 6,
discs rated above 6 - Level 7 and 8 -
will not play.
A larger number indicates more
mature content.
When the DVD Parental Rating function
is on, you must enter the 4 digit PIN to
play discs with restricted rating levels.
Change the 4-digit password used to
access security functions.
To change the PIN, follow these steps:
Select , and then press
the v button. The Enter old PIN
screen appears.
Enter the old PIN. If you never
changed the PIN, enter the
default PIN: 0000. The Enter new
PIN screen appears.
Enter the new PIN in the Enter
new PIN field.
Re-enter the new PIN in the
Confirm new PIN field. The "PIN
is changed successfully." message
appears.
Press the v button.
Remove any discs.
Press and hold the ^ button on the
front panel for 5 seconds or more.
All settings will revert to their
factory settings.
✎
■ When the factory default settings
are restored, all the user stored BD
data is deleted.
General Settings
Lets you specify the time zone that is
applicable to your area.
Support Settings
The Software Upgrade menu allows
you to upgrade the player’s software
for performance improvements or
additional services.
To upgrade By Online, follow these
steps:
Remove any discs from the
player.
In the player’s menu, go to
> >
.
Select , and then press
the v button. The Connecting
to Server message appears.
A popup message will appear if
an update is available.
If a download is available, select
. The download and upgrade
process starts. (Important: Never
turn the player off or on manually
during an upgrade.)
When the update is complete, the
player will restart automatically
.
✎
■ The upgrade is complete when the
player turns off, and then turns on
again by itself.
■ Never turn the player off or back
on manually during the update
process.
■ Samsung Electronics takes no
legal responsibility for any product
malfunction caused by an unstable
Internet connection or consumer
negligence during a software upgrade.
■ No disc should be in the product
when you upgrade the software By
Online.
To upgrade by USB, follow these steps:
Visit www.samsung.com. Select
Owners & Support > Manual &
Downloads. Then, follow the
directions on the screen.
Download the latest USB software
upgrade zip archive to your
computer.
Unzip the zip archive to your
computer. You should have a
single RUF file with the same
name as the zip file.
Copy the RUF file to a USB flash
drive.
Make sure there is no disc in the
player, and then insert the USB
flash drive into the USB port of
the player.
In the player’s menu, go to
> >
.
Select
.
✎
■ No disc should be in the product
when you upgrade the software
using the USB Host jack.
■ When the software upgrade is
done, check the software details in
the software Upgrade menu.
■ Do not turn off the player during
the software upgrade. It may cause
the player to malfunction.
■ Software upgrades using the USB
Host jack must be performed with a
USB flash memory stick only.
If you have connected the player to
your network, and then set Auto
Upgrade Notification on, the player
automatically notifies you when a
new software version is available for
the player.
To set Auto Upgrade Notification on,
follow these steps:
Select ,
and then press the v button.
Use the ▲▼ buttons to select ,
and then press the v button
.
If there is a new software version
available, the player notifies you with
a popup message.
To upgrade the firmware, remove
any discs from the player.
Select in the Pop-up. The
player turns off automatically,
then restarts, and begins the
download. (Never turn the player
on or off manually during an
upgrade.)
The update progress popup
appears.
When the update is complete, the
player will restart automatically.
✎
■ The upgrade is complete when the
player turns off, and then turns on
again by itself.
■ Never turn the player off or on
manually during the update process.
■ Samsung Electronics takes no legal
responsibility for player malfunction
caused by an unstable Internet
connection or consumer negligence
during software upgrade
.
Provides contact information for
assistance with your player.
Lets you view the general disclaimer
regarding third party contents and
services.
Returns all settings to their factory
defaults except for the network
settings.
Media Play
Playing a Commercially
Recorded Disc
Press the 8 button to open the
disc tray.
Place a disc gently into the disc
tray with the disc's label facing up.
Press the 8 button to close
the disc tray. Playback starts
automatically.
Playing Files on a USB Device
There are two methods you can
use to play or view multimedia files
located on a USB device.
Turn the player on.
Connect the USB device to the
USB port on the front panel
of the player. The New Device
Connected pop-up appears.
No Disc
>
"
'
✎
■ If the pop-up does not appear, go
to Method 2.
Use the ▲▼ buttons to select
, or , and then
press the v button. The Photos,
Videos & Music screen appears
listing the content of the device.
Depending on how the contents
are arranged, you will see either
folders, individual files, or both.
✎
■ Even though the player will display
folders for all content types, it will
only display files of the Content
Type you selected in Step 3. For
example, if you selected music, you
will only be able to see music files.
You can change this selection by
returning to the Photos, Videos &
Music screen and going to Step 3 in
Method 2 below.
If necessary, use the ▲▼◀▶
buttons to select a folder, and
then press the v button.
Select a file to view or play, and
then press the v button.
Press the button to exit a
folder or the button to return
to the Home screen.
Go to pages 21~23 for
instructions that explain how to
control playback of videos, music,
and pictures on a USB device.
Turn the player on.
Connect the USB device to the
USB port on the front panel of
the player. Select
and then press the ▲▼ button to
select . Press the v button.
No Disc
Use the ▲▼◀▶ buttons to select
, or on
the Home screen, and then press
the v button. The Photos,
Videos & Music screen appears
listing the content of the device.
Depending on how the contents
are arranged, you will see either
folders, individual files, or both
.
✎
■ Even though the player will display
folders for all content types, it will
only display files of the Content
Type you selected in Step 3. For
example, if you selected music, you
will only be able to see music files.
You can change this selection by
returning to the Photos, Videos &
Music screen and repeating Step 3
.
If necessary, use the ▲▼◀▶
buttons to select a folder, and
then press the v button.
Use the ▲▼◀▶ buttons to select
a file to view or play, and then
press the v button.
Press the button to exit a
folder or the button to return
to Home screen.
Go to pages 21~23 for
instructions that explain how to
control playback of videos, music,
and pictures on a USB device.
✎
■ If you insert a disc when playing
a USB device, the device mode
changes to "Disc" automatically.
Playing a Disc with User
Recorded Content
You can play multimedia files you
have recorded on Blu-ray, DVD, or CD
discs.
Place a user recorded disc into
the disc tray with the disc’s label
facing up, and then close the tray.
Use the ◀▶ buttons to select the
type of content you want to view
or play - , , or
- and then press the v
button.
✎
■ Even though the player will display
folders for all content types, it will
only display files of the Content
Type you selected in Step 2. For
example, if you selected music, you
will only be able to see music files.
You can change this selection by
returning to the Home screen and
repeating Step 2.
A screen appears listing the
contents of the disc. Depending
on how the contents are
arranged, you will see either
folders, individual files, or both.
If necessary, use the ▲▼◀▶
buttons to select a folder, and
then press the v button.
Use the ▲▼◀▶ buttons to select
a file to view or play, and then
press the v button.
Press the button one
or more times to exit a current
screen, exit a folder, or to return
to the Home screen. Press the
button to return directly to
the Home Screen.
Go to pages 21~23 for
instructions that explain how to
control playback of videos, music,
and pictures on a disc.
Using DLNA
Connect the Blu-ray Disc Player,
your PC, and/or your DLNA
compatible device to the same
wireless network.
Follow the directions in the DLNA
software Installation/Instruction
manual to set up devices and files
for playing or viewing.
Select on the
player's Home screen, and then
press the v button. In the list
of DLNA connected devices that
appears, select your PC or other
DLNA compatible device, and
then press the v button.
Use the ◀▶ buttons to select the
type of content you want to view or
play - , , or -
and then press the v button.
✎
■ Even though the player will display
folders for all content types, it will
only display files of the Content
Type you selected in Step 4. For
example, if you selected music, you
will only be able to see music files.
You can change this selection by
returning to the Home screen and
repeating Step 4.
A screen appears listing the
contents of the PC or DLNA
device. Depending on how the
contents are arranged, you will
see either folders, individual files,
or both.
If necessary, use the ▲▼◀▶
buttons to select a folder, and
then press the v button.
Use the ▲▼◀▶ buttons to select
a file to view or play, and then
press the v button.
Press the button one
or more times to exit a current
screen, exit a folder, or to return
to the Home screen. Press the
button to return directly to
the Home Screen.
Go to pages 21~23 for
instructions that explain how to
control playback of videos, music,
and pictures on a disc.
Controlling Video Playback
You can control the playback of
video content located on a Blu-ray
disc, DVD, CD, USB device, or your
computer. Depending on the media,
some of the functions described in
this manual may not be available.
During Blu-ray or DVD disc playback,
the Full screen button does not operate
.
SCREEN
VIEW A-B
FULLBONUS REPEAT REPEAT
1
2
The player does not play sound in
Search, Slow, or Step mode.
●
To return to normal speed playback,
press the 6 button
.
6 Starts playback.
5 Stops playback.
7 Pauses playback.
During playback, press the
3 or 4 button.
Each time you press the 3
or 4 button, the playback
speed will change.
In pause mode, press the
4 button. Each time
you press the 4 button,
the playback speed will
change.
In pause mode, press the
7 button.
Each time you press the
7 button, a new frame
appears.
During playback, press the
1 or 2 button.
Each time you press the
1 or 2 button, the disc
moves to the previous or
next chapter or file.
During playback, press
this button to display the
Disc menu.
During playback, press
this button to display the
Title menu.
During playback, press
this button to display
the Pop-up menu.
Controlling Music Playback
You can control the playback of music
located on a Blu-ray disc, DVD, CD,
USB device, or your computer.
SCREEN
VIEW A-B
FULLBONUS REPEAT REPEAT
1
4
6
3
25
1
: During Playlist playback,
press the desired track number.
The selected track is played.
2
: During playback, press the
1 or 2 button to move to the
previous or next file of the playlist.
3
5 button : Stops a track.
4
During playback, press the 3 or
4 button.
Each time you press the 3 or 4
button, the playback speed will
change.
5
: Pauses a track.
6
6 button : Plays the currently
selected track.
During Playlist playback, press the
button.
"
c
'
+
? \
><'
Press the ◀▶ buttons to select
, or .
Press the v button.
Songs are played in
the order in which
they were recorded.
( ) The current song is
repeated.
( ) All songs are repeated.
( ) Shuffle plays songs in
random order.
To move to the Music List, press
the
5
or button.
The Music List screen appears.
c
( )
'
a
Press the ▲▼◀▶ buttons to
move to a desired track, and then
press the button. A
check appears on the track.
Repeat this procedure to select
additional tracks.
To remove a track from the list,
move to the track, and then press
the button again.
The check on the track is cancelled.
When done, press the v button.
The tracks you selected are
displayed on the right side of the
screen. The player plays the first
track.
To change the play list, press the
5
button or button to
return to the Music List. Repeat
Steps 2, 3, and 4.
To cancel the play list and return
to the Home screen, press the
or button.
✎
■ You can create a playlist with up to
99 tracks on Audio CDs (CD-DA).
■ If you remove all the tracks from
a play list and then press the v
button, the player lists and plays all
the tracks on the disc.
Lets you copy audio files from an
Audio CD (CD-DA) to a USB/HDD
device.
Open the disc tray. Place the
audio (CD-DA) disc on the tray,
and close the tray. Insert a USB
device into the USB jack on the
front of the product.
In Stop mode, press the ▲▼◀▶
buttons to move to a desired
track, and then press the
button. A check appears on
the track.
Repeat this procedure to select
additional tracks.
To remove a track from the list,
move to the track, and then press
the button again.
The check on the track is
cancelled.
When done, press the
button, and then select using
the ▲▼ buttons, and then press
the v button. The Rip pop-up
appears.
Use the ▲▼ buttons to select the
device to store the ripped files to,
and then press the v button.
✎
■ Do not disconnect the device while
ripping is in progress.
If you want to cancel ripping,
press the v button, and then
select . Select to continue
ripping.
When ripping is complete, the
"Ripping is completed." message
appears. Press the v button to
go back to the Playback screen
.
✎
■ This function may not be
supported by some discs.
■ On the Ripping screen, you can
also choose
and
l
.
-
Use to select all tracks.
This cancels your individual track
selections.
-
Use l to deselect all
selected tracks at once.
Lets you copy video/photo/music
contents from a data disc to a
USB/HDD device.
Open the disc tray. Place the data
disc on the tray, and close the tray.
Insert a USB device into the USB
jack on the front of the product.
The new device pop-up appears.
Press the ▲ button, and then
press the ◀▶ to select Blu-ray,
DVD or CD.
Use the ▲▼ buttons to select
, or , and then
press the v button. The Photos,
Videos & Music screen appears
listing the content of the device.
Depending on how the contents
are arranged, you will see either
folders, individual files, or both.
✎
■ Even though the player will display
folders for all content types, it will
only display files of the Content
Type you selected in Step 3. For
example, if you selected music, you
will only be able to see music files.
You can change this selection by
returning to the Photos, Videos &
Music screen and repeating Step 3.
In Stop mode, use the ▲▼◀▶
buttons to select a file you want
to copy, and then press the
button. A check
appears to the left of the file.
Repeat Step 4 to select and check
additional files.
To remove a file from the list,
move to the file, and then press
the button again.
The check on the file is removed.
When done, press the
button. Select using
the ▲▼ buttons, and then press
the v button. The Copy to USB
pop-up appears.
Use the ▲▼ buttons to select the
device to store the copied files on,
and then press the v button.
✎
■ Do not disconnect the device while
copying is in progress.
If you want to cancel copying,
press the v button and then
select . Select to continue
copying.
When copying is complete, the
"Copying is completed." message
appears. Press the v button to
go back to the Playback screen.
✎
■ This function may not be
supported by some discs.
■ On the Copying screen, you can
also choose
and
l
.
-
Use to select all item.
This cancels your individual item
selections.
-
Use l to deselect all
selected item at once.
Playing Photo Contents
You can control the playback of
photo content located on a Blu-ray
disc, DVD, CD, USB device, or your
computer.
During playback, press the
button.
Select to start or stop
the slide show.
Select to set a slide
show's speed.
Select to listen to music
while viewing a slide
show.
Select to enlarge
the current picture.
(Enlarge up to 4 times)
Select to rotate the
picture. (This will rotate
the picture either
clockwise or counter
clockwise.)
Shows the picture
information.
✎
■
Depending on the disc or storage
device, the Tools menu may differ.
■
To enable the background music
function, the photo file must be
in the same storage media as the
music file.
However, the sound quality can be
affected by the bit rate of the MP3
file, the size of the photo, and the
encoding method.
■
You can't enlarge the subtitle and
PG graphic in the full screen mode.
Using Netflix
You can use your Blu-ray player to
stream movies, TV shows, and other
video content from Netflix. To stream
content from Netflix, you must
connect your Blu-ray player to your
network. (See page 9.)
On the Home screen, select Netflix
and then press the v button.
✎
■ If this is the first time you start any of
the apps at the bottom of the screen
(Netflix, Pandora, or YouTube), you
will be asked to read and agree to the
Terms of Service Agreement and the
Samsung Service Privacy Policy. You
must agree to both to continue. After
you have agreed to both, go to .
If you already have a Netflix account,
select, press the v button,
and then go to . If not, go to
.
Enter your e-mail address by
selecting character, number, or
symbol keys on the screen using
the ▲▼◀▶ buttons, and then
pressing the v button.
✎
■ If this is the first time you start any of
the apps at the bottom of the screen
(Netflix, Pandora, or YouTube), you
will be asked to read and agree to the
Terms of Service Agreement and the
Samsung Service Privacy Policy. You
must agree to both to continue. After
you have agreed to both, go to .
On the Pandora welcome screen,
if you have a Pandora account
select "I have a Pandora account",
and then press the v button.
Go to . If you do not have a
Pandora account select "I am new
to Pandora" and then press the
v button. Go to .
Enter your e-mail address and
password. Use the ▲▼◀▶
buttons to select a character, and
then press the v button.
Repeat Step 3 to enter all the
characters in your e-mail address
and password.
When done, select at the
bottom of the screen, and then
press the v button.
If you do not have a Pandora
account, follow the directions on
the Pandora screen to create a
Pandora account.
Using YouTube
You can use your Blu-ray player to
stream video content from YouTube.
To stream content from YouTube, you
must connect your Blu-ray player to
your network. (See page 9.)
On the Home screen, select
YouTube, and then press the v
button.
✎
■ If this is the first time you start any of
the apps at the bottom of the screen
(Netflix, Pandora, or YouTube), you
will be asked to read and agree to
the Terms of Service Agreement and
the Samsung Service Privacy Policy.
You must agree to both to continue.
After you have agreed to both, go
to
.
On the YouTube screen, use the
▲▼ buttons, to select
, and then press the
v button.
displays the
currently Popular on YouTube
videos by category and lets you
select a category
.
lets you search for videos
using key words or names.
When done, move the cursor to
at the bottom of the screen,
and then press the v button.
Repeat the same process for the
Password field.
After you have entered your
password, select at the
bottom of the screen, and then
press the v button.
✎
■ To return to the previous page,
press the button on your
remote.
■ To exit Netflix, press the button
on your remote.
Movies and videos on Netflix are
displayed in rows by category. To scroll
through a row, use the ◀▶ buttons.
To move up or down, from one row
to another, use the ▲▼ buttons. To
select a movie or video, highlight it,
and then press the v button.
You can also search for movies and
videos by keywords - title, director’s
name, actor’s name, etc.
To search, follow these steps:
Select the Search field at the top
of the movie/video list screen, and
then press the v button.
Using the ▲▼◀▶ buttons, select
a letter or number, and then press
the v button. The character you
selected appears at the top of the
field on the right.
Repeat Step 2 to select more
letters or numbers.
As you add more letters, Netflix
will start to display matches in the
field on the right.
To move to the list of matches, press
the ▶ button one or more times.
To select a movie or video, highlight
it and then press the v button.
✎
■ Select the Delete button (with an
X) at the top of the screen to delete
the last character you entered.
Using Pandora
You can use your Blu-ray player to
stream music from Pandora, free of
charge. To stream music from Pandora,
you must connect your Blu-ray player
to your network. (See page 9.)
On the Home screen, select Pandora,
and then press the v button.
lets you access
your YouTube account and send
videos from your tablet or smart
phone to your TV.
To begin, select either
,
and then press the v
button.
Use the ◀▶ buttons to select
a category you want, and then
press the v button. YouTube
automatically starts the first video
in that category.
After the video starts, press the
v button. The Control Panel
appears.
On the Control Panel you can
Pause, Rewind, Fast Forward, and
perform other operations on the
running video by using the ◀▶
buttons on your remote to select
the appropriate button on the
Control Panel, and then pressing
the v button on the remote.
With a video running and the
Control Panel displayed, press the
▼ button once. The Information
screen appears.
In the Information screen, press
the ▼ button once. The Related
Videos category appears displaying
individual related videos.
Use the ◀▶ buttons to select
a video, and then press the v
button. The first video stops and
the video you selected plays.
If you do not find a video you want,
press the Return or ▲ button to
return to previous screens.
With a video running and the
Control Panel displayed, press the
▼ button once. The Information
screen appears.
In the Information screen, press
the ▼ button once. The Related
Videos category appears displaying
individual related videos.
Press the ▼ button again.
The Current Play List appears
displaying individual videos in the
Current Play List.
Use the ◀▶ buttons to select
a video, and then press the v
button.
The first video stops and the video
you selected plays.
If you do not find a video you
want, press the or ▲
button to return to previous
screens.
On the YouTube Home screen,
select Search, and then press the
v button.
On the Search screen, use the ◀▶
buttons to select a character, and
then press the v button. The
character you selected appears in
the field at the top.
Repeat Step 2 to select more
letters or numbers.
As you add more characters,
YouTube will start to display
matches in the field on the right.
This may take some time.
To move to the list of matches,
press the ▶ button one or more
times.
To select a video, use the ▲▼◀▶
buttons to highlight it, and then
press the v button. YouTube
plays the video.
✎
■ Select at the top of the
screen to clear all entered
characters.
■ Select the Delete button (with an :)
at the top of the screen to delete
the last character you entered.
Sign In & Settings lets you access your
YouTube account and send videos
from your tablet or smart phone to
your TV.
To use Sign In & Settings, follow these
steps;
On the YouTube Home page,
select , and
then press the v button.
On the Sign In & Settings page,
use the ◀▶buttons to select
either Sign In or Pair, and then
press the v button.
Follow the directions on the
screen.
PROBLEM SOLUTION
If you experience other
problems.
~
Go to the table of contents and find the section of the user
manual that contains information about the feature you are having
the problem with, and then follow the procedure again.
~
If you still cannot resolve the problem, please contact Samsung
Customer Support at the phone number listed on the last page of
this manual.
I can see folders shared through
DLNA, but I cannot see the files.
~
DLNA only shows Video, Photo, and Music files. Other types of
files are not displayed.
Video is played intermittently.
~
Check if the network is stable.
~
Check if the network cable is properly connected and if the network is overloaded.
~
The wireless connection between the DLNA compatible device and
the player is unstable. Check the connection.
The DLNA connection between
the Player and PC is unstable.
~
IP addresses within the same subnetwork should be unique. If they
are not, IP interference can cause this phenomenon.
~
Check if you have a firewall enabled. If so, disable the firewall function.
I cannot connect to the BD-LIVE
server.
~
Check whether the network connection is working or not by
accessing Network Status in Network Settings (Settings > Network
Settings > Network Status).
~
Check whether the USB memory device is connected to the player.
~
The memory device must have at least 1GB of free space to
accommodate the BD-LIVE service.
You can check the available size in BD Data Management.
~
Check whether the BD-LIVE Internet Connection menu is set to Allow(All).
~
If all above fails, contact the content provider or update the player
to the latest firmware.
When using the BD-LIVE
service, an error occurs.
~
The memory device must have at least 1GB of free space to
accommodate the BD-LIVE service.
You can check the available size in BD Data Management.
✎
■
When the factory default settings are restored, all stored user BD data is deleted.
If you contact us to repair your player, an administration fee may be charged if either:
1.
An engineer is called out to your home at your request and there is no defect in the product.
2.
You bring the unit to a repair center and there is no defect in the product.
We will provide you with the amount of the administration fee before we make a home visit or
begin any work on your player.
We recommend you read this manual thoroughly, search for a solution on line at
www.samsung.com, or contact Samsung Customer Care at 1-800-SAMSUNG (726-7864) before
seeking to repair your player.
Appendix
Troubleshooting
Before requesting service, please try the following solutions.
PROBLEM SOLUTION
No operation can be performed
with the remote control.
~
Check the batteries in the remote control. They may need replacing.
~
Operate the remote control at a distance of no more than 20 feet from the player.
~
Remove the batteries, and then hold down one or more buttons for
several minutes to drain the microprocessor inside the remote control to
reset it. Reinstall the batteries and try to operate the remote control again.
The disc does not play.
~
Ensure that the disc is installed with the label side facing up.
~
Check the region number of the Blu-ray Disc/DVD.
The Disc Menu does not appear.
~
Ensure that the disc has disc menus.
The prohibition message
appears on the screen.
~
This message appears when an invalid button is pressed.
~
The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).
~
You’ve requested a title or chapter number or search time that is out of range.
Play mode differs from the
Setup Menu selection.
~
Some of the functions selected in the Setup Menu may not
work
properly if those functions are not encoded on the disc.
You cannot change the screen
aspect ratio (screen size).
~
The Screen Ratio on your Blu-ray Disc/DVD Disc is fixed and cannot
be changed.
~
This is not a problem with the player.
No audio.
~
Make sure you have selected the correct Digital Output in the
Audio Options Menu.
The screen is blank.
~
If the HDMI output is set to a resolution your TV cannot support (for
example, 1080p), you may not see a picture on your TV.
~
Press the ^ button (on the front panel) for more than 5 seconds with no
disc inside. All settings will revert to the factory settings.
~
When the factory default settings are restored, all stored user BD data is
deleted.
Forgot password
~
Press the ^ button (on the front panel) for more than 5 seconds
with no disc inside. All settings including the password will revert
to the factory settings.
Don’t use this unless absolutely necessary.
~
When the factory default settings are restored, all stored user BD data is deleted.
The picture is noisy or distorted
~
Make sure that the disc is not dirty or scratched.
~
Clean the disc.
No HDMI output.
~
Check the connection between the TV and the HDMI jack of the player.
~
Check if your TV supports 480p, 720p, 1080i, or 1080p HDMI input resolutions.
Abnormal HDMI output screen.
~
If random noise appears on the screen, it means that TV does not
support HDCP (High-bandwidth Digital Content Protection).
Specifications
General
Power Requirements AC110-120V 50/60Hz
Power Consumption 10.8W
Weight 2.2 Ibs
Dimensions 11.4 (W) X 8.7 (D) X 1.5 (H) inches
Operating Temperature Range
+41°F to +95°F
Operating Humidity Range 10 % to 75 %
USB
Type A USB 2.0
DC output
5V 0.5A Max.
HDMI
Video 1080p, 1080i, 720p, 480p
Audio PCM, Bitstream
Audio Output Digital Audio Output Coaxial
Network
Ethernet 100BASE - TX Terminal
Wireless LAN Built-In
Security
WEP (OPEN/SHARED)
WPA-PSK (TKIP/AES)
WPA2-PSK (TKIP/AES)
WPS(PBC) Supported
-Network speeds equal to or below 10Mbps are not supported.
-Design and specifications are subject to change without prior notice.
-Weight and dimensions are approximate.
-Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website: www.samsung.com/
recyclingdirect or call, (877) 278 - 0799
NOT ALL discs are compatible
● Subject to the restrictions described below and those noted throughout this Manual,
including the Disc Type and Characteristics section of this user manual, disc types that can
be played are: pre-recorded commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA)
discs; BD-RE/-R, DVD-RW/-R discs; and CD-RW/-R discs.
●
Discs other than those listed above cannot be and are not intended to be played by this player.
Some of the discs listed above may not play due to one or more reasons provided below.
● Samsung cannot guarantee that this player will play every disc bearing the BD-ROM, BD-
RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may
not respond to all operating commands or operate all features of every disc. These and
other disc compatibility and player operation issues with new and existing format discs are
possible because:
-Blu-ray is a new and evolving format. This player may not operate all Blu-ray features
because 1.) some features may be optional, 2.) additional features may have been added
to the Blu-ray Disc format after the production of this player, and 3.) certain features may
be subject to delayed availability;
-not all new and existing disc format versions are supported by this player;
-new and existing disc formats may be revised, changed, updated, improved and/or
supplemented;
-some discs are produced in a manner that allows specific or limited operation or restricts
features during playback;
-some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and
CD-RW/-R logos may still be non-standardized discs;
-some discs may not be played depending on their physical state or recording conditions;
-problems and errors can occur during the creation of Blu-ray Disc or DVD software
and/or the manufacture of discs;
-this player operates differently than a standard DVD player or other AV equipment;
and/or
-for reasons noted throughout this user manual and for other reason(s) discovered and
posted by SAMSUNG customer care center.
● If you encounter disc compatibility or player operation problems, please contact the
SAMSUNG customer care center.
You may also contact the SAMSUNG customer care center for possible updates to this player.
● For additional information on playback restrictions and disc compatibility, refer to the
following sections of this users' manual : Precautions, Before reading the user manual, Disc
Types and Characteristics, and Before Playing.
● : CONSUMERS SHOULD NOTE THAT
NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH
THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH THIS PRODUCT, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.
● Because AACS (Advanced Access Content System) is approved as the content protection
system for the Blu-ray Disc format, similar to use of CSS (Content Scramble System) for the
DVD format, certain restrictions are imposed on playback, analog signal output, etc., of
AACS protected contents.
The operation of this product and restrictions on this product may vary depending on your
time of purchase as those restrictions may be adopted and/or changed by AACS after the
production of this product. Furthermore, BD-ROM Mark and BD+ are additionally used as
content protection systems for the Blu-ray Disc format, which imposes certain restrictions
including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain
additional information on AACS, BD-ROM Mark, BD+, or this product, please contact
SAMSUNG customer care center.
● Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should
only connect your Player directly to your TV, not to a VCR. Connecting to a VCR results in a
distorted picture from copy-protected Blu-ray Disc/DVDs.
● Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized
recording, use, display, distribution, or revision of television programs, videotapes, Blu-ray
Discs, DVDs, and other materials may subject you to civil and/or criminal liability.
● :
This product uses Cinavia technology to limit the use of unauthorized copies
of some commercially-produced film and videos and their soundtracks. When a prohibited
use of an unauthorized copy is detected, a message will be displayed and playback or
copying will be interrupted. More information about Cinavia technology is provided at
the Cinavia Online Consumer Information Center at http://www.cinavia.com. To request
additional information about Cinavia by mail, send a postcard with your mailing address to:
Cinavia Consumer Information Center, P.O. Box 86851, San Diego CA, 92138, USA.
This product incorporates proprietary technology under licence from Verance Corporation
and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patents issued
and pending as well as copyright and trade secret protection for certain aspects of such
technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2013 Verance
Corporation. All rights reserved by Verance. Reverse engineering or disassembly is prohibited
.
All content and services accessible through this device belong to third parties and are protected
by copyright, patent, trademark and/or other intellectual property laws. Such content and
services are provided solely for your personal noncommercial use. You may not use any content
or services in a manner that has not been authorized by the content owner or service provider.
Without limiting the foregoing, unless expressly authorized by the applicable content owner
or service provider, you may not modify, copy, republish, upload, post, transmit, translate, sell,
create derivative works, exploit, or distribute in any manner or medium any content or services
displayed through this device.
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED "AS IS." SAMSUNG DOES NOT
WARRANT CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY
PURPOSE. SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
SAMSUNG DOES NOT GUARANTEE THE ACCURACY, VALIDITY, TIMELINESS, LEGALITY, OR
COMPLETENESS OF ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE
AND UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL SAMSUNG BE LIABLE,
WHETHER IN CONTRACT OR TORT, FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES, ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES
ARISING OUT OF, OR IN CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A
RESULT OF THE USE OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Third party services may be terminated or interrupted at any time, and Samsung makes no
representation or warranty that any content or service will remain available for any period
of time. Content and services are transmitted by third parties by means of networks and
transmission facilities over which Samsung has no control. Without limiting the generality of
this disclaimer, Samsung expressly disclaims any responsibility or liability for any interruption or
suspension of any content or service made available through this device.
Samsung is neither responsible nor liable for customer service related to the content and
services. Any question or request for service relating to the content or services should be made
directly to the respective content and service providers.
● Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
● For DTS patents, see http://patents.dts.com. Manufactured under license
from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS 2.0+Digital Out is a trademark
of DTS, Inc. © DTS, Inc. All Rights Reserved.
● The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
● Oracle and Java are registered trademarks of Oracle and/or its affiliates.
Other names may be trademarks of their respective owners
● Open Source License Notice
-In the case of using open source software, Open Source Licenses are available on the
product menu.
● Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association.
● DLNA
®
, the DLNA Logo and DLNA CERTIFIED
®
are trademarks, service
marks, or certification marks of the Digital Living Network Alliance.
2.0+Digital Out
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by
SAMSUNG against manufacturing defects in materials and workmanship for a limited warranty period of:
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in the United States. To receive warranty service, the
purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only be performed by a SAMSUNG authorized service center.
The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG's authorized service center. Transportation of the product
to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during
the limited warranty period specified above. All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and
products assume the remaining original warranty, or ninety (90) days, whichever is longer.
SAMSUNG’s obligations with respect to software products distributed by SAMSUNG under the SAMSUNG brand name are set forth in the applicable end user license
agreement. Non-SAMSUNG hardware and software products, if provided, are on an "AS IS" basis.
Non-SAMSUNG manufacturers, suppliers, publishers, and service providers may provide their own warranties.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal, and except to the extent otherwise expressly provided for in this statement,
noncommercial use of this product, and shall not apply to the following, including, but not limited to: damage which occurs in shipment; delivery and installation; applications and uses
for which this product was not intended; altered product or serial numbers; cosmetic damage or exterior finish; accidents, abuse, neglect, fire, water, lightning or other acts of nature;
use of products, equipment, systems, utilities, services, parts, supplies, accessories, applications, installations, repairs, external wiring or connectors not supplied and authorized by
SAMSUNG, or which damage this product or result in service problems; incorrect electrical line voltage, fluctuations and surges; customer adjustments and failure to follow operating
instructions, cleaning, maintenance and environmental instructions that are covered and prescribed in the instruction book; product removal or reinstallation; reception problems and
distortion related to noise, echo, interference or other signal transmission and delivery problems. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY AFTER THE EXPRESS WARRANTY PERIODS STATED
ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE BINDING ON
SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS
BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN
AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER
ASSUMES ALL RISK AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY ARISING OUT OF
THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY SHALL
NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so the above
limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
To obtain warranty service, please contact the SAMSUNG customer care center.
The benefits of this Limited Warranty extend only to the original purchaser of Samsung products from an authorized Samsung reseller.
THIS LIMITED WARRANTY SHALL NOT APPLY TO ANY SAMSUNG PRODUCTS PURCHASED FROM UNAUTHORIZED RESELLERS OR RETAILERS, EXCEPT IN STATES
WHERE SUCH RESTRICTION MAY BE PROHIBITED.
For a list of Samsung authorized retailers, please go to: http://www.samsung.com/us/peaceofmind/authorized_resellers.html.
© 2014 Samsung Electronics Co.,Ltd. All rights reserved
QUESTIONS OR COMMENTS?
IN THE US 1-800-SAMSUNG
(726-7864) www.samsung.com/us/support
Samsung Electronics America, Inc.
85 Challenger Road
Ridgefield Park, NJ 07660
