Samsung Bn68 01737C 00 Users Manual

BN68-01737C-00 to the manual 91a6b1de-ba6e-4102-b083-6b488c236d19

: Samsung Samsung-Bn68-01737C-00-Users-Manual-278522 samsung-bn68-01737c-00-users-manual-278522 samsung pdf

Open the PDF directly: View PDF .
Page Count: 64

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country Customer Care Centre Web Site

AUSTRIA 0800-SAMSUNG (726-7864) www.samsung.com/at

BELGIUM 02 201 2418 www.samsung.com/be

CZECH REPUBLIC

800-726-786 (800 - SAMSUNG) www.samsung.com/cz

Distributor pro Českou republiku:

Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8

DENMARK 70 70 19 70 www.samsung.com/dk

EIRE 0818 717 100 www.samsung.com/ie

FINLAND 030-6227 515 www.samsung.com/

FRANCE 3260 SAMSUNG (€ 0,15/Min)

08 25 08 65 65 (€ 0,15/Min) www.samsung.com/fr

GERMANY 01805 - SAMSUNG (726-7864) (€ 0,14/Min) www.samsung.de

HUNGARY 06-80-SAMSUNG (726-7864) www.samsung.com/hu

ITALIA 800-SAMSUNG (726-7864) www.samsung.com/it

LUXEMBURG 02 261 03 710 www.samsung.com/lu

NETHERLANDS 0900-SAMSUNG (726-7864) (€ 0,10/Min) www.samsung.com/nl

NORWAY 815-56 480 www.samsung.com/no

POLAND 0 801 801 881

022-607-93-33 www.samsung.com/pl

PORTUGAL 80820-SAMSUNG (726-7864) www.samsung.com/pt

SLOVAKIA 0800-SAMSUNG (726-7864) www.samsung.com/sk

SPAIN 902-1-SAMSU(72678) www.samsung.com/es

SWEDEN 0771-400 200 www.samsung.com/se

SWITZERLAND 0800-SAMSUNG (726-7864) www.samsung.com/ch

U.K 0845 SAMSUNG (7267864) www.samsung.com/uk

TURKEY 444 77 11 www.samsung.com/tr

ESTONIA 800-7267 www.samsung.ee

LATVIA 8000-7267 www.samsung.com/lv

LITHUANIA 8-800-77777 www.samsung.lt

KAZAHSTAN 8-10-800-500-55-500 www.samsung.com/kz_ru

KYRGYZSTAN 00-800-500-55-500 -

RUSSIA 8-800-555-55-55 www.samsung.ru

TADJIKISTAN 8-10-800-500-55-500 -

UKRAINE 8-800-502-0000 www.samsung.ua

UZBEKISTAN 8-10-800-500-55-500 www.samsung.com/kz_ru

LCD TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/global/register

Model Serial No.

BN68-01737C-00

BN68-01737C-Eng.indb 1 2008-08-12 �� 5:47:15

Digital TV (DVB-T) Notice

1. FUNCTIONALITIES RELATED TO DIGITAL TV (DVB) ARE ONLY AVAILABLE IN COUNTRIES OR AREAS WHERE DVB-T

(MPEG2 AND MPEG4 AVC) DIGITAL TERRESTRIAL SIGNALS ARE BROADCAST. DVB-T is the European consortium

standard for the broadcast transmission of digital terrestrial television. Please check with your local dealer about the availability

of DVB-T service in your area.

2. Although this TV set meets the current DVB-T standards as of [August, 2008], compatibility with future DVB-T digital terrestrial

broadcast cannot be guaranteed.

3. Some Digital TV functions may not be available or operate correctly in some countries or regions.

4. For more information, please contact your local SAMSUNG customer care centre.

© 2008 Samsung Electronics Co., Ltd. All rights reserved.

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. (See back

cover for more information.)

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen

Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention

is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the screen when

displaying a still image.

Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right

and center of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console

may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.

Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-

images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

BN68-01737C-Eng.indb 2 2008-08-12 �� 5:47:15

English

N O T

Symbol Press Note One-Touch Button TOOL Button

English - 1

Connecting and Preparing Your TV

List of Parts .........................................................................2

Installing the Wall Mount Kit ................................................2

Viewing the Control Panel ...................................................3

Viewing the Connection Panel.............................................4

Remote Control ...................................................................6

Mini Remote Control ............................................................7

Installing Batteries in the Remote Control ...........................7

Switching On and Off...........................................................8

Placing Your Television in Standby Mode ............................8

Viewing the Menus ..............................................................8

Using the TOOLS Button .....................................................9

Using the Wheel button .......................................................9

Plug & Play Feature ..........................................................10

Channel Control

Storing Channels and channel .........................................10

Managing Channels ..........................................................13

Picture Control

Changing and Resetting the Picture Settings ....................14

Viewing Picture-in-Picture .................................................17

PC Display .........................................................................18

Setting up the TV with your PC .........................................19

Sound Control

Changing the Sound Standard ..........................................19

Selecting the Sound Mode ................................................21

Function Description

Conguring the Setup Menu ..............................................21

Setting the Time ................................................................25

Network Connection ..........................................................26

Network Setup ...................................................................28

Source List / Edit Name .....................................................29

Product Guide ...................................................................30

WISELINK Pro

Connecting a USB Device .................................................30

Using the WISELINK Pro Function ....................................31

Using and Sorting Photo List .............................................33

Viewing a Photo or Slide Show ........................................34

Using and Sorting the Music List .......................................36

Playing a Music ................................................................37

Using and Sorting the Movie List .......................................38

Playing a Movie File .........................................................39

Deleting the Photo/Music/Movie File ................................40

Picture/Music Settings Using WISELINK Pro ....................41

Using the Setup Menu .......................................................41

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

WISELINK Pro-DLNA

Setting the DLNA Network .................................................42

Installing the DLNA Application .........................................42

Using the DLNA Application ..............................................44

Using the DLNA Function ..................................................47

Content Library

Activating the Content Library ...........................................48

Using the Content Library ..................................................49

Using Additional Content Using External USB Memory

Storage ..............................................................................50

About Anynet+

Connecting Anynet+ Devices ............................................51

Setting Up Anynet+ ...........................................................52

Scanning and Switching between Anynet+ Devices..........52

Recording ..........................................................................53

Listening through a Receiver (Home theater) ...................54

Troubleshooting for Anynet+ ............................................54

Recommendations for Use

Teletext Feature .................................................................55

Setting Up Your Remote Control .......................................56

Remote Control Codes ......................................................57

Auto Wall-Mount Adjustment (Sold separately)

(depending on the model) .................................................59

Using the Anti-Theft Kensington Lock

(depending on the model) .................................................60

Securing the TV to the Wall ...............................................60

Troubleshooting: Before Contacting Service Personnel ....61

Specications ....................................................................62

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

Contents

BN68-01737C-Eng.indb 1 2008-08-12 �� 5:47:15

English - 2

List of Parts

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

Remote Control &

Batteries (AAA x 2)

Mini Remote Control &

Lithium battery (3V) Power Cord Program CD Cover-Bottom Cleaning Cloth

Owner’s Instructions

•

Warranty card

•

Safety Guide

•

Warranty card / Safety Guide (Not available in all locations)

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount the TV on the wall. For

detailed information on installing the wall mount, see the instructions provided with

the Wall Mount items. Contact a technician for assistance when installing the wall

mounted bracket. Samsung Electronics is not responsible for any damage to the

product or injury to yourself or others if you elect to install the TV on your own.

Do not install your Wall Mount Kit while your TV is turned on. It may result in

personal injury due to electric shock.

Remove the stand and cover the bottom hole with a cap and fasten with two

screws.

N

N

Connecting and Preparing Your TV

BN68-01737C-Eng.indb 2 2008-08-12 �� 5:47:16

English - 3

1

SOURCE

E

The Source list appears on the screen. In the on-screen

menu, use this button as you would use the ENTER

E

button on the remote control.

2

MENU

Press to see an on-screen menu of your TV’s features.

3

–

=

+

Press to increase or decrease the volume.

In the on-screen menu, use the –

=

+ buttons as you

would use the ◄ and ► buttons on the remote control.

4

>

C/P.

P

<

Press to change channels. In the on-screen menu, use

the

>

C/P.

P

<

buttons as you would use the ▼ and ▲

buttons on the remote control.

5

POWER INDICATOR

Blinks and turns off when the power is on and lights up in

stand-by mode.

6

P

(POWER)

Press to turn the TV on and off.

7

REMOTE CONTROL SENSOR

Aim the remote control towards this spot on the TV.

8

SPEAKERS

Viewing the Control Panel

The product colour and shape may vary depending on the model.

N

Front Panel buttons

Touch each button to operate.

88

4

1

2

3

6

5

7

BN68-01737C-Eng.indb 3 2008-08-12 �� 5:47:17

English - 4

Power Input

Viewing the Connection Panel

[TV Side Panel]

[TV Rear Panel]

The product colour and shape may vary depending on the model.

Whenever you connect an external device to your TV, make sure that power on the unit is turned off.

When connecting an external device, match the colour of the connection terminal to the cable.

1

PC IN [PC] / [AUDIO]

Connect to the video and audio output jack on your PC.

2

COMPONENT IN

Connect component video cables (optional) to component connector (‘PR’, ‘PB’, ‘Y’) on the rear of your set and the other

ends to corresponding component video out connectors on the DTV or DVD.

If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD)

and connect the DTV (or DVD) to component connector (‘PR’, ‘PB’, ‘Y’) on your set.

The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and

Cr.

Connect RCA audio cables (optional) to [R-AUDIO-L] on the rear of your set and the other ends to corresponding audio out

connectors on the DTV or DVD.

3

HDMI IN 1, HDMI IN 2, HDMI IN 3, HDMI IN 4

Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)

No additional Audio connection is needed for an HDMI to HDMI connection.

When using an HDMI / DVI cable connection, you must use the HDMI IN 2 jack.

What is HDMI?

‘High Denition Multimedia interface’ allows the transmission of high denition digital video data and multiple channels

of digital audio.

The HDMI / DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied).

The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital

Copy Protection) coding feature installed, and supports multi - channel digital audio.

The TV may not output sound and pictures may be displayed with abnormal colour when DVD players / Cable Boxes /

Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and

there is no sound, connect the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-

L] jacks on the back of the TV. If this happens, contact the company that provided the DVD player / Cable Box / Satellite

receiver to conrm the HDMI version, then request a rmware update. HDMI cables that are not 1.3 may cause annoying

icker or no screen display.

DVI IN(HDMI2) [R-AUDIO-L]

DVI audio outputs for external devices.

N

N

N

-

-

-

-

-

-

-

-

N

-

-

N

-

1 2 3 4

90!@#

5

6

3

7

8

BN68-01737C-Eng.indb 4 2008-08-12 �� 5:47:17

English - 5

Supported modes for HDMI / DVI and Component.

480i 480p 576i 576p 720p 1080i 1080p

HDMI / DVI 50Hz X X X O O O O

HDMI / DVI 60Hz XOX X O O O

Component O O O O O O O

4

ANT IN

To view television channels correctly, a signal must be received by the set from one of the following sources: An outdoor

aerial / A cable television network / A satellite network

5

S-VIDEO IN

Connect S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

Connect the audio cables to AV IN [R-AUDIO-L].

6

COMMON INTERFACE SLOT

When not inserting ‘CI CARD’ in some channels, ‘Scrambled Signal’ is displayed on the screen.

The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in about

2~3 minutes. If an error message is displayed, please contact your service provider.

When the channel information conguration has nished, the message ‘Updating Completed’ is displayed, indicating that the

channel list is now updated.

You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with your

hands since dropping the CI CARD may cause damage to it.

Insert the CI-Card in the direction marked on it.

The place of the COMMON INTERFACE Slot may be different depending on its model.

7

WISELINK

Connect a USB mass storage device to view movies and photos and listen to music les.

You can connect to Samsung’s network wirelessly using the ‘Samsung Wireless LAN Adapter’ (Sold separately).

8

AV IN

Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio out connectors on the A/V

device.

9

DIGITAL AUDIO OUT (OPTICAL)

Connect to a Digital Audio Component.

When the HDMI IN jacks are connected, the DIGITAL AUDIO OUT (OPTICAL) jack on the TV outputs 2 channel audio

only. If you want to hear 5.1 channel audio, connect the Optical jack on the DVD player or Cable / Satellite Box directly to

an Amplier or Home Theater, not the TV.

0

EXT 1, EXT 2

Connector Input Output

Video Audio (L / R) RGB Video + Audio (L / R)

EXT 1 O O O Only TV or DTV output is available.

EXT 2 O O Output you can choose.

Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.

!

LAN

Connect a LAN cable to this port to connect to the Network.

@

SERVICE

Connector for Service only.

Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing angle using your

remote control.

#

KENSINGTON LOCK (depending on the model)

The Kensington Lock (optional) is a device used to physically x the system when used in a public place.

If you want to use a locking device, contact the dealer where you purchased the TV.

The location of the Kensington Lock may be different depending on its model.

N

-

-

-

-

-

-

N

N

N

-

-

-

-

N

-

-

-

-

-

-

-

BN68-01737C-Eng.indb 5 2008-08-12 �� 5:47:17

English - 6

Remote Control

You can use the remote control up to a distance of about 23 feet from the TV.

The performance of the remote control may be affected by bright light.

1

POWER

Television Standby button.

2

TV

Selects the TV mode directly.

3

NUMERIC BUTTONS

Number buttons for direct channel

access.

4

−

One or more digit channel selection

5

VOLUME BUTTONS

+ : Volume increase

– : Volume decrease

6

SOURCE

Available source selection

7

GUIDE

Electronic Programme Guide (EPG)

display

8

TOOLS

Use to quickly select frequently used

functions.

9

INFO

Use to see information on the current

broadcast

0

COLOURS BUTTONS

Use these buttons in the Channel list

and WISELINK Pro, etc.

@

E.MODE

Press to select the optional display

and sound modes for sports, cinema

and games.

#

Use these buttons in the DMA,

WISELINK Pro and Anynet+. (∏:

This remote can be used to control

recording on Samsung recorders with

the Anynet+ feature)

$

SET

Sets the remote to control your TV,

VCR, DVD, Cable Box or Set-Top

Box.

%

MODE

Press to operate your TV, DVD, STB

or VCR (See pages 60)

^

Pressing the ON/OFF @ light button

toggles between on and off. When

the remote control is on, and a key

is pressed on the remote control, the

remote control buttons will be lit for a

moment.

&

PRE-CH

Previous channel

*

MUTE

Temporary sound switch-off

(

CHANNEL BUTTONS

P < : Next channel

P > : Previous channel

)

MENU

Displays the main on-screen menu

a

W.LINK

This function enables you to view and

play photo and music les from an

external device.

b

RETURN

Returns to the previous menu

c

 UP▲/DOWN▼/LEFT◄/

RIGHT►/ENTER

E

Press the Up / Down / Left / Right

sections of the wheel button and

Enter to select on-screen menu items

and change menu values. You can

navigate up and down the menu,

switch channels and adjust the

volume by turning the wheel button.

d

EXIT

Exit the on-screen menu

e

DMA

Use this when connecting a

SAMSUNG DMA (Digital Media

Adapter) device through an HDMI

interface and switching to DMA mode.

(The DMA button is optional.) For

more information on the operating

procedures, refer to the user manual

of the DMA. This button is available

when “Anynet+(HDMI-CEC)” is “On”

(see page 52)

f

INFO.L

Not Available

g

SUBT.

Digital subtitle display

h

CONTENT

This function enables you to view

“Content Library”. (see page 48)

i

RESET

When your remote does not work,

change the batteries and press the

RESET button for 2-3 seconds before

use.

Teletext Functions

2

:: Exit from the teletext display

6

0: Teletext mode selection (LIST /

FLOF)

7

8: Teletext store

8

4: Teletext size selection

9

5Teletext reveal

0

Fastext topic selection

!

/: Alternately select Teletext,

Double, or Mix.

%

1: Teletext sub page

&

2: Teletext next page

3: Teletext previous page

*

6: Teletext index

)

9: Teletext hold

b

7: Teletext cancel

TV

SET RESET

VCR DVD STB

N

1_BN68-01737C-Eng.indd 6 2008-08-13 �� 7:23:39

English - 7

Mini Remote Control

The Mini Remote Control is a simplied remote control that consists of the power,

channel and volume buttons only.

1

Television Standby button

This button only works when you press it for longer than 1.5 seconds.

2

< : Next channel

> : Previous channel

3

+ : Volume increase

– : Volume decrease

4

IrDA transmitter

Use the Mini Remote Control so that this part faces the TV.

Installing Batteries in the Remote Control

Normal Remote Control

1. Lift the cover at the back of the remote control upward as shown in the gure.

2. Install two AAA size batteries.

Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram

inside the compartment.

3. Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be

using the remote control for a long time.

Using the remote control with the ON / OFF @ light button set to on will

reduce the battery usage time.

Mini Remote Control

1. Turn the battery cover counterclockwise to unlock it and then separate the

battery cover.

2. Insert the corresponding 3V Lithium battery.

3. Place the battery cover into the remote control aligning it with the grooves and

then turn the battery cover clockwise to lock the cover.

If the remote control doesn’t work, check the following:

1. Is the TV power on?

2. Are the plus and minus ends of the batteries reversed?

3. Are the batteries drained?

4. Is there a power outage or is the power cord unplugged?

5. Is there a special uorescent light or neon sign nearby?

N

N

N

N

N

N

1

4

33

2

2

BN68-01737C-Eng.indb 7 2008-08-12 �� 5:47:18

English - 8

Switching On and Off

The mains lead is attached to the rear of your set.

1. Plug the mains lead into an appropriate socket.

The standby indicator lights up on your set.

2. Press the

P

button on your set.

You also can press the POWER

P

button or the TV button on the remote control to turn the TV on.

The programme that you were watching last is reselected automatically.

3. Press the numeric button (0~9) or channel up / down (< / >) button on the remote control or >C/P.

P

< button on your

set.

When you switch the set on for the very rst time, you will be asked to choose language in which the menus are to be

displayed.

4. To switch your set off, press the POWER

P

button again.

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you

wish to interrupt viewing temporarily (during a meal, for example).

1. Press the POWER

P

button on the remote control.

The screen is turned off and a red standby indicator appears on your set.

2. To switch your set back on, simply press the POWER

P

, numeric buttons (0~9), TV button or channel up / down (< / >)

button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to

unplug the set from the mains and aerial.

Viewing the Menus

1. With the power on, press the MENU button. The main menu appears on the

screen. The menu’s left side has icons: Picture, Sound, Channel, Setup, Input,

Application.

2. Press the ▲ or ▼ button to select one of the icons. Then press the ENTER

E

button to access the icon’s sub-menu.

3. Press the EXIT button to exit.

The on-screen menus disappear from the screen after about one minute.

N

N

N

N

N

N

N

TV

SET RESET

VCR DVD STB

Mode

:

Standard

Backlight : 7

Contrast : 95

Brightness : 45

Sharpness : 50

Colour : 50

Tint (G / R) : G50 / R50

Detailed Settings

Picture

BN68-01737C-Eng.indb 8 2008-08-12 �� 5:47:18

English - 9

Using the Wheel button

To increase the channel number, turn the wheel clockwise when the

Channel Display is displayed. To decrease the channel number, turn the

wheel counterclockwise.

To turn the volume up, turn the wheel clockwise when the Volume

Control window is displayed. To turn the volume down, turn the wheel

counterclockwise.

To move to a lower menu, turn the wheel clockwise when the menu Display

is displayed. To move to a higher menu, turn the wheel counterclockwise.







Using the TOOLS Button

You can use the TOOLS button to select your frequently used functions quickly and

easily. The “Tools” menu changes depending on which external input mode you are

viewing.

1. Press the TOOLS button. The “Tools” menu will appear.

2. Press the ▲ or ▼ button to select a menu.

3. Press the ▲ / ▼ / ◄ / ► / ENTER

E

buttons to display, change, or use the

selected items. For a more detailed description of each function, refer to the

corresponding page.

Anynet+ (HDMI-CEC): see page 52

Picture Size: see page 16

Picture Mode: see page 14

Sound Mode: see page 19

Sleep Timer: see page 25

SRS TS XT: see page 19

Energy Saving: see page 23

Dual l ll: see page 21

PIP: see page 17

Auto Adjustment: see page 19

•

•

•

•

•

•

•

•

•

•

TV

SET RESET

VCR DVD STB

TV

SET RESET

VCR DVD STB

Tools

Anynet+ (HDMI-CEC)

Picture Size : Auto Wide

Picture Mode : Standard

Sound Mode : Custom

Sleep Timer : Off

SRS TS XT : Off

Energy Saving : Off

Dual l ll : Mono

U

Move

E

Enter

e

Exit

BN68-01737C-Eng.indb 9 2008-08-12 �� 5:47:18

English - 10

Plug & Play Feature

When the TV is initially powered on, basic settings proceed automatically and subsequently.

1. Press the POWER button on the remote control. The message “The Menu

Language, Store Demo, Channels, and Time will be set.” is displayed.

2. Press the ENTER

E

button, then “Select the OSD Language.” menu is

automatically displayed. Press the ENTER

E

button.

3. Select the appropriate language by pressing the ▲ or ▼ button. Press the

ENTER

E

button to conrm your choice.

4. Press the ◄ or ► button to select “Store Demo” or “Home Use”, then the ENTER

E

button.

We recommend setting the TV to “Home Use” mode for the best picture in your home environment.

“Store Demo” mode is only intended for use in retail environments.

If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use” (Standard): Press the Volume

button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.

5. Press the ENTER

E

button. Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER

E

button to

conrm your choice.

6. Press the ▲ or ▼ button to select the channel source to memorize. Press the ENTER

E

button to select “Start”.

Digital & Analogue: Digital and Analogue channels.

Digital: Digital channels.

Analogue: Analogue channels.

The channel search will start and end automatically.

Press the ENTER

E

button at any time to interrupt the memorization process.

After all the available channels are stored, the message “Set the Clock Mode.” is displayed.

7. Press the ENTER

E

button. Press the ▲ or ▼ button to select “Auto”, then Press the ENTER

E

button.

If you select “Manual”, “Set current date and time” is displayed. (See page 25)

If you have received a digital signal, the time will be set automatically. If not, see page 25 to set the clock.

8. The message “Enjoy your viewing” is displayed. When you have nished, press the ENTER

E

button.

If you want to reset this feature...

1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select

“Setup”, then press the ENTER

E

button.

2. Press the ENTER

E

button again to select “Plug & Play”.

3. Enter your 4 digit PIN number. The default PIN number of a new TV set is ‘0-0-

0-0’.

If you want to change PIN number, refer to 21 page.

The “Plug & Play” feature is only available in the TV mode.

N

N

N

N

N

N

N

N

N

N

N

Channel Control

Storing Channels and channel

Country

Analogue Channel: You can change the country for analogue channels.

Digital Channel: You can change the country for digital channels.

The PIN number input screen appears. Enter your 4 digit PIN number.

❑





N

Setup

Plug & Play  ►

Language : English

Time

Network Selection : Cable

Wireless Network Setup

Cable Network Setup

Child Lock : On

Change PIN

Channel

Country

 ►

Auto Store

Manual Store

Full Guide

Mini Guide

Default Guide : Mini Guide

Channel List

Channel Mode : Added Ch.

Plug & Play

The Menu Language, Store Demo, Channels, and Time

will be set.

OK

E

Enter

BN68-01737C-Eng.indb 10 2008-08-12 �� 5:47:19

English - 11

Auto Store

You can scan for the frequency ranges available to you (and availability

depends on your country). Automatically allocated programme numbers may

not correspond to actual or desired programme numbers.

Digital & Analogue: Digital and Analogue channels.

Digital: Digital channels.

Analogue: Analogue channels.

Scans for all channels with active broadcast stations and stores them in the

TV’s memory.

If you want to stop Auto Store, press the ENTER

E

button.

The “Stop Auto Store?” message will be displayed.

Select “Yes” by pressing the ◄ or ► button, then press the ENTER

E

button.

If a channel is locked using the “Child Lock” function, the PIN input window appears.

Manual Store

Scans for a channel manually and stores it in the TV’s memory.

If a channel is locked using the “Child Lock” function, the PIN input window appears.

Digital Channel

Manual store for digital channels.

Channel: Set the Channel number using the ▲, ▼ or number (0~9) buttons.

Frequency: Set the frequency using the number buttons.

Bandwidth: Set the bandwidth using the ▲, ▼ or number (0~9) buttons.

When it has nished, channels are updated in the channel list.

Analogue Channel

Manual store for analogue channel.

Programme (Programme number to be assigned to a channel): Sets the programme number using the ▲, ▼ or number

(0~9) buttons.

Colour System → Auto / PAL / SECAM / NTSC4.43: Sets the colour system value using the ▲ or ▼ button.

Sound System → BG / DK / I / L: Sets the sound system value using the ▲ or ▼ button.

Channel (When you know the number of the channel to be stored): Press the ▲ or ▼ button to select “C” (Air channel) or

“S” (Cable channel). Press the ► button, then press the ▲, ▼ or number (0~9) buttons to select the required number.

You can also select the channel number directly by pressing the number (0~9) buttons.

If there is abnormal sound or no sound, reselect the sound standard required.

Search (When you do not know the channel numbers): Press the ▲ or ▼ button to start the search. The tuner scans the

frequency range until the rst channel or the channel that you selected is received on the screen.

Store (When you store the channel and associated programme number): Set to “OK” by pressing the ENTER

E

button.

Channel mode

P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position

numbers from P00 to P99. You can select a channel by entering the position number in this mode.

C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in

this mode.

S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this

mode.

Full Guide / Mini Guide

The EPG (Electronic Programme Guide) information is provided by the broadcasters. Programme entries may appear blank

or out of date as a result of the information broadcast on a given channel. The display will dynamically update as soon as new

information becomes available.

For the detailed procedures on using “Full Guide” and “Mini Guide”, refer to the descriptions on page 12.

You can also display the guide menu simply by pressing the GUIDE button.

(To congure the “Default Guide”, refer to the descriptions.)

Full Guide:

Displays the programme information as time ordered One hour segments. Two hours of programme information

is displayed which may be scrolled forwards or backwards in time.

Mini Guide:

The information of each programme is displayed by each line on the current channel Mini Guide screen from the

current programme onwards according to the programme starting time order.

❑

•

•

•

N

N

N

N

N

❑

N

N



•

•

•

N



•

•

•

•

N

N

•

•

N

-

-

-

❑

N

O





TV

SET RESET

VCR DVD STB

Channel

Fine Tune

Signal Information

LNA : On

►

BN68-01737C-Eng.indb 11 2008-08-12 �� 5:47:19

English - 12

Default Guide

Mini Guide / Full Guide:

You can decide whether to display either the “Mini Guide” or the “Full Guide” when the GUIDE

button on the remote control is pressed.

Channel List

For the detailed procedures on using the “Channel List”, refer to the descriptions on pages 13~14.

Channel Mode

When press the P >/< button, Channels will be switched within the selected channel list.

Added Ch: Channels will be switched within the memorized channel list.

Favourite Ch.: Channels will be switched within the favourite channel list.

Fine Tune

If the reception is clear, you do not have to ne tune the channel, as this is done automatically during the search and store

operation. If the signal is weak or distorted, you may have to ne tune the channel manually.

Fine tuned channels that have been saved are marked with an asterisk “*” on the right-hand side of the channel number in

the channel banner.

To reset the ne-tuning, select “Reset” by pressing the ▲ or ▼ button and then press the ENTER

E

button.

Only Analogue TV channels can be ne tuned.

Signal Information

You can get information about the signal status.

If the signal status is poor, the “No signal.” message is displayed.

While viewing a Digital channel, this function can be selected.

LNA→On/Off

If the TV is operating in a weak-signal area, the LNA (Low Noise Amplier) function can improve the reception (a low-noise

preamplier boosts the incoming signal).

While viewing an Analogue channel, this function can be selected.

Using the Full / Mini Guide

To... Then...

Watch a programme in the EPG list Select a programme by pressing the ▲, ▼, ◄, ► button.

Exit the guide Press the blue button

If the next programme is selected, it is scheduled with the clock icon displayed. If the ENTER

E

button is pressed again, press the ◄,

► button to select Cancel Schedules, the scheduling is canceled with the clock icon gone.

View programme information Select a programme of your choice by pressing the ▲, ▼, ◄, ► button.

Then press the INFO button when the programme of your choice is highlighted.

The programme title is on the upper part of the screen center.

Please click on INFO button for the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality

Information (HD / SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext and brief summary of the highlighted

programme are included on the detailed information. “...” will be appeared if the summary is long.

Toggle between the “Mini Guide” or “Full Guide” Press the red button repeatedly.

In Full Guide

Scrolls backwards quickly (24 hours).

Scrolls forwards quickly (24 hours). Press the green button repeatedly.

Press the yellow button repeatedly.

In Mini Guide

Display next page quickly.

Display previous page quickly. Press the green button.

Press the yellow button.

❑



❑

❑





❑

N

N

N

❑

N

N

❑

N

Full Guide

DTV Cable 900 f tn 2:10 Tue 1 Jun

Freshmen On Campus

2:00 - 2:30

No Detailed Information

Today 2:00 - 3:00 3:00 - 4:00

Mint Extra

Loaded

Fresh 40 with Dynamite MC

The Distillery

Smash Hits! Sunday

900 f tn

901 ITV Play

902 Kerrang!

903 Kiss

903 oneword

903 Smash Hits!

▼

Street Hypn..

Kisstory

No Information

No Information

No Information

Freshmen O..

Watch

Information



Mini Guide



+24 Hours



Exit

Mini Guide DTV Cable 900 f tn

Street Hypnosis

Booze Britain

2:00

2:30

5:00

▼

Freshmen On Campus

Watch

Information



Full Guide



Next Page



Exit

BN68-01737C-Eng.indb 12 2008-08-12 �� 5:47:19

English - 13

Managing Channels

Using this menu, you can Add / Delete or set Favourite channels and use the

programme guide for digital broadcasts.

Select a channel in the “All Channels”, “Added Channels” or “Favourite” screen

by pressing the ▲ / ▼ buttons, and pressing the ENTER

E

button. Then you

can watch the selected channel.

All Channels:

Shows all currently available channels.

Added Channels:

Shows all added channels.

Favourites:

Shows all favourite channels.

Programmed:

Shows all current reserved programmes.

Using the Colour buttons with the Channel List

Red (Channel Type): Toggle between your “TV”, “Radio”, “Data / Other” and

“All”.

Green (Zoom): Enlarges or shrinks a channel number.

Yellow (Select): Selects multiple channel lists.

TOOLS (Option): Displays the “Delete” (or “Add”), “Add to Favourite” (or

“Delete from Favourite”), “Lock” (or “Unlock”), “Timer Viewing”, “Edit Channel

Name”, “Sort”, “Edit Channel Number”, “Select All”, “Deselect All” or “Auto

Store” menu. (The Options menus may differ depending on the situation.)

Channel Status Display Icons

AAn analogue channel. cA channel selected by pressing the yellow button.

♥

A channel set as a Favourite. (A programme currently being broadcast.

\A locked channel. )A reserved programme

Channel List Option Menu (in All Channels / Added Channels / Favourites)

Press the TOOLS button to use the option menu.

Option menu items may differ depending on the channel status.

Add / Delete

You can delete or add a channel to display the channels you want.

All deleted channels will be shown on “All Channels” menu.

A gray-coloured channel indicates the channel has been deleted.

The “Add” menu only appears for deleted channels.

You can also delete a channel to the “Added Channels” or “Favourite” menu

in the same manner.

Add to Favourite / Delete from Favourite

You can set channels you watch frequently as favourites.

The “♥” symbol will be displayed and the channel will be set as a favourite.

All favourite channels will be shown on “Favourite” menu.

Lock / Unlock

You can lock a channel so that the channel cannot be selected and viewed. This function is available only when the “Child

Lock” is set to “on”. (see page 21)

The PIN number input screen appears. Enter your 4 digit PIN number.

The default PIN number of a new TV set is “0-0-0-0”. You can change the PIN, by selecting “Change PIN” from the menu.

The “\” symbol will be displayed and the channel will be locked.

Timer Viewing

If you reserve a programme you want to watch, the channel is automatically switched to the reserved channel in the Channel

List; even when you are watching another channel. To reserve a programme , set the current time rst. (See page 25.)

Only memorized channels can be reserved.

You can set the channel, day, month, year, hour and minute directly by pressing the number buttons on the remote

control.

Reserving a programme will be shown on “Programmed” menu.

Digital Programme Guide and Viewing Reservation

When a digital channel is selected, and you press the ► button, the Programme Guide for the channel appears. You can

reserve a programme according to the procedures described above.

N









N

-

-

-

-

N

N

N



N

N

N

N



N

N



N

N

N



N

N

N

N

Channel

Mini Guide

Default Guide : Mini Guide

Channel List

Channel Mode : Added Ch.

Fine Tune

Signal Information

LNA : On

824 UKTV Gold

825 UKTV style

A

1 C --

A

2 C

--

A

3

♥

C

--

A

4 C

--

A

5 C

--

A

6 C

--

A

7 C

--

A

8 C

--

Added Channels

All



Channel Type



Zoom



Select

Option

824 UKTV Gold

825 UKTV style

A

1 C --

A

2 C

--

A

3

C

--

A

4 C

--

A

5 C

--

A

6 C

--

A

7 C

--

A

8 C

--

All Channels

All



Channel Type



Zoom



Select

Option

Delete

Add to Favourite

Lock

Timer Viewing

Edit Channel Name

Sort

▼

BN68-01737C-Eng.indb 13 2008-08-12 �� 5:47:19

English - 14

Edit Channel Name (only analogue channel)

Channels can labeled so that their call letters appear whenever the channel is selected.

The names of digital broadcasting channels are automatically assigned and cannot be labeled.

Edit Channel Number (only digital channel)

You can also edit the channel number by pressing the number buttons on the remote control.

Sort

This operation allows you to change the programme numbers of the stored channels. This operation may be necessary after

using the auto store.

Select All / Deselect All

Select All: You can select all the channels in the channel list.

Deselect All: You can deselect all the selected channels by pressing the yellow button.

You can perform the add / delete, add to Favourites / delete from Favourites, or lock / unlock function for multiple

channels at the same time. Select the required channels and press the yellow button to set all the selected channels at

the same time.

The c mark appears to the left of the selected channels.

You can only select “Deselect All” when there is a selected channel.

Auto Store

For further details on setting up options, refer to page 11.

If a channel is locked using the “Child Lock” function, the PIN input window appears.

Channel List Option Menu (in Programmed )

You can view, modify or delete a reservation.

Press the TOOLS button to use the option menu.

Change Info: Select to change a viewing reservation.

Cancel Schedules: Select to cancel a viewing reservation.

Information: Select to view a viewing reservation. (You can also change the

reservation information.)

Select All: Select all reserved programmes.



N







•

•

N

N

N



N

N

N









Picture Control

Changing and Resetting the Picture Settings

Mode

You can select the type of picture which best corresponds to your viewing

requirements.

Dynamic: Selects the picture for high-definition in a bright room.

Standard: Selects the picture for the optimum display in a normal

environment.

Movie: Selects the picture for viewing movies in a dark room.

Press the TOOLS button to display “Tools” menu. You can also set the

picture mode by selecting “Tools → Picture Mode”.

Backlight / Contrast / Brightness / Sharpness / Colour / Tint(G/R)

Your television has several setting options that allow you to control the picture

quality.

Backlight: Adjusts the brightness of LCD back light.

Contrast: Adjusts the contrast level of the picture.

Brightness: Adjusts the brightness level of the picture.

❑







T

❑







Programmed

1 / 1 / 2008

13:59 5 TV1 Quincy, M.E

18:59 2 TV3 The Equalizer

20:59 2 TV3 McMillan & Wife

21:59 2 TV3 M.Spillane’s mike Hammer

Change Info

Cancel Schedules

Information

Select All

All



Channel Type



Zoom



Select

Option

Information

Mode : Standard

►

Backlight : 5

Contrast : 95

Brightness : 45

Sharpness : 50

Colour : 50

Tint(G/R) : G50 / R50

Detailed Settings

Picture

Colour : 50

Tint (G / R) : G50 / R50

DetailedSettings  ►

Picture Options

Picture Reset

Picture

BN68-01737C-Eng.indb 14 2008-08-12 �� 5:47:19

English - 15

Sharpness: Adjusts the edge definition of the picture.

Colour: Adjusts colour saturation of the picture.

Tint(G/R): Adjusts the colour tint of the picture.

Select a picture mode to be adjusted rst. The adjusted values are saved for each picture mode.

When you make changes to “Backlight”, “Contrast”, “Brightness”, “Sharpness”, “Colour” or “Tint(G/R)”, the OSD will be

adjusted accordingly.

In Analog TV, Ext., AV, S-Video modes of the PAL system, you cannot use the “Tint” Function.

In PC mode, you can only make changes to “Backlight”, “Contrast” and “Brightness”.

Settings can be adjusted and stored for each external device you have connected to an input of the TV.

The energy consumed during use can be signicantly reduced if the level of brightness of the picture is reduced, and then this

will reduce the overall running cost.

Detailed Settings

Samsung’s new TVs allow you to make even more precise picture settings than previous models. See below to adjust detailed

picture settings.

“Detailed Settings” is available in “Standard” or “Movie” mode.

In PC mode, you can only make changes to “Dynamic Contrast”, “Gamma” and “White Balance” from among the “Detailed

Settings” items.

Black adjust → Off / Low / Medium / High

You can select the black level on the screen to adjust the screen depth.

Dynamic Contrast → Off / Low / Medium / High

You can adjust the screen contrast so that the optimal contrast is provided.

Gamma

You can adjust the Primary Colour (Red, Green, Blue) Intensity.

Colour Space

Colour Space is a colour matrix composed of red, green and blue colours. Select your favourite Colour Space to experience

the most natural colour.

Auto: Auto Colour Space automatically adjusts to the most natural colour tone based on programme sources.

Native: Native Colour Space offers deep and rich colour tone.

Custom: Adjusts the colour range to suit your preference.

Customizing the Colour Space

Colour → Red / Green / Blue / Yellow / Cyan / Magenta

Adjusts the Colour range to suit your preference. “Colour” is available when “Colour Space” is set to “Custom”.

Red / Green / Blue: In “Colour”, you can adjust the RGB values for the selected colour.

Reset: Resets the colour space to the default values.

White Balance

You can adjust the colour temperature for more natural picture colours.

R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain: Changing the adjustment value will refresh the adjusted screen.

Reset: The previously adjusted white balance will be reset to the factory defaults.

Flesh Tone

You can emphasize the pink ‘esh tone’ in the picture.

Changing the adjustment value will refresh the adjusted screen.

Edge Enhancement → Off / On

You can emphasize object boundaries in the picture.

xvYCC → Off / On

Setting the xvYCC mode to on increases detail and colour space when watching movies from an external device (i.e. DVD

player).

“xvYCC” is available when the picture mode is set to “Movie”, and the external input is set to “HDMI” or “Component”

mode.

If “xvYCC” function is active, PIP cannot be selected.







N

N

N

N

N

N

❑

N

N









•

•

•

N

-

-

-

-



•

•



N





N

N

BN68-01737C-Eng.indb 15 2008-08-12 �� 5:47:19

English - 16

Picture Options

In PC mode, you can only make changes to the “Colour Tone” and “Size” from among the items in “Picture Options”.

Colour Tone → Cool2 / Cool1 / Normal / Warm1 / Warm2

You can select the most comfortable colour tone to your eyes.

The adjusted values are stored according to the selected “Picture” mode.

“Warm1” or “Warm2” is only activated when the picture mode is “Movie”.

Size

You can select the picture size which best corresponds to your viewing requirements.

Press the TOOLS button to display “Tools” menu. You can also set the size by selecting “Tools → Picture Size”.

Auto Wide: Automatically adjusts the picture size to the “16:9” aspect ratio.

16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.

Wide Zoom: Magnify the size of the picture more than 4:3.

Zoom: Magnies the 16:9 wide picture (in the vertical direction) to t the screen size.

4:3: This is the default setting for a video movie or normal broadcasting.

Just Scan: Use the function to see the full image without any cutoff when HDMI (720p / 1080i / 1080p) or Component (1080i

/ 1080p) signals are input.

Depending on the input source, the picture size options may vary.

The items available may differ depending on the selected mode.

In PC Mode, only “16:9” and “4:3” mode can be adjusted.

Settings can be adjusted and stored for each external device you have connected to an input of the TV.

Temporary image retention may occur when viewing a static image on the set for more than two hours.

“Wide Zoom”: Press the ► button to Select “Position”, then press the ENTER

E

button. Press the ▲ or ▼ button to

move the screen up / down. Then press the ENTER

E

button.

“Zoom”: Press the ► button to Select “Position”, then press the ENTER

E

button. Press the ▲ or ▼ button to move

the picture up and down. Then press the ENTER

E

button. Press the ► button to Select “Size”, then press the

ENTER

E

button. Press the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction. Then press

the ENTER

E

button.

After selecting “Just Scan” in HDMI (1080i / 1080p) or Component (1080i / 1080p) mode: Select “Position” by pressing

the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.

Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER

E

button. You can initialize the setting.

If you use the “Just Scan” function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the

overscan function.

When Double ( , ) mode has been set in PIP, the Picture Size cannot be set.

Screen Mode → 16:9 / Wide Zoom / Zoom / 4:3

When setting the picture size to “Auto Wide” in a 16:9 wide TV, you can determine the picture size you want to see the 4:3

WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function

is intended for users to select it.

16:9: Sets the picture to 16:9 wide mode.

Wide Zoom: Magnify the size of the picture more than 4:3.

Zoom: Magnify the size of the picture vertically on screen.

4:3: Sets the picture to 4:3 normal mode.

This function is available in “Auto Wide” mode.

This function is not available in “PC”, “Component” or “HDMI” mode.

Digital NR → Off / Low / Medium / High / Auto

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any

static and ghosting that may appear on the screen.

When the signal is weak, select one of the other options until the best picture is displayed.

DNIe → Off / Demo / On

This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can view the screen with

the DNIe feature activated. If you set the DNIe to Demo, you can view the applied DNIe and normal pictures on the screen, for

demonstration purposes. Using this function, you can view the difference in the visual quality.

DNIe™ (Digital Natural Image engine) DNIe™

This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and

white enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you. DNIe™

technology will t every signal into your eyes.

This function is not available in “Movie” and “Standard” mode.

❑

N



N

N



T

•

•

•

•

•

•

N

N

N

N

N

N

N

N

N

N



•

•

•

•

N

N



N



N

N

BN68-01737C-Eng.indb 16 2008-08-12 �� 5:47:20

English - 17

HDMI Black Level → Normal / Low

You can directly select the black level on the screen to adjust the screen depth.

This function is active only when the external input connects to HDMI (RGB signals).

100Hz Motion Plus → Off / Low / Medium / High / Demo

Removes drag from fast scenes with a lot of movement to provide a clearer picture.

This function is not available in PC mode.

If you enable “100 Hz Motion Plus”, noise may appear on the screen. If this occurs, set “100Hz Motion Plus” to “off” or

select one of the other options.

Blue Only Mode → Off / On

This function is for AV device measurement experts. This function displays the blue signal only by removing the red and

green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of video

equipment such as DVD players, Home Theaters, etc. Using this function, you can adjust the Colour and Tint to preferred

values appropriate to the signal level of each video device using the Red / Green / Blue / Cyan / Magenta / Yellow Colour Bar

Patterns, without using an additional Blue Filter.

“Blue Only Mode” is available when the picture mode is set to “Movie” or “Standard”.

Smart LED → Off / On / Demo

Controls LED backlight to maximize picture clarity. If you set the “Smart LED” to “Demo”, you can view the applied “Smart

LED” function and normal pictures on the screen.

PictureReset→ResetPictureMode/Cancel

Resets all picture settings to the default values.

Select a picture mode to be reset. The reset is performed for each picture mode.



N



N

N



N



❑

N

Viewing Picture-in-Picture

You can display a sub picture within the main picture of set programme or video

input. In this way, you can watch the picture of set programme or video input from

any connected equipment while watching the main picture.

You may notice that the picture in the PIP window becomes slightly unnatural

when you use the main screen to view a game or karaoke.

Press the TOOLS button to display “Tools” menu. You can also congure PIP

related settings by selecting “Tools → PIP”.

PIP→On/Off

You can activate or deactivate the PIP function.

Main picture Sub picture

Component

HDMI 1, HDMI / DVI 2, HDMI 3, HDMI 4

PC

TV, Ext.1, Ext.2, AV

Source

You can select a source of the sub-picture.

Size → / /

You can select a size of the sub-picture.

If main picture is in “HDMI” mode, “Size” is available.

Position → / / /

You can select a position of the sub-picture.

In Double ( , ) mode, “Position” cannot be selected.

Channel

You can select a channel of the sub-picture only when the “Source” is set to “TV”.

N

T

❑





N



N



Setup

Entertainment : Off

Energy Saving : Off

PIP  ►

Software Upgrade

Common Interface

PIP

PIP : On

Source : TV

Size :

Position :

Channel : ATV 11

L

Move

E

Enter

R

Return

BN68-01737C-Eng.indb 17 2008-08-12 �� 5:47:20

English - 18

PC Display

Setting Up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. The actual

screens on your PC will probably be different, depending upon your particular

version of Windows and your particular video card. However, even if your actual

screens look different, the same basic set-up information will apply in almost all

cases. (If not, contact your computer manufacturer or Samsung Dealer.)

1. First, click on ‘Control Panel’ on the Windows start menu.

2. When the control panel window appears, click on ‘Appearance and Themes’

and a display dialog-box will appear.

3. When the control panel window appears, click on ‘Display’ and a display dialog-

box will appear.

4. Navigate to the ‘Settings’ tab on the display dialog-box.

The correct size setting (resolution)

Optimum: 1920 X 1080 pixels

If a vertical-frequency option exists on your display settings dialog box, the

correct value is ‘60’ or ‘60 Hz’. Otherwise, just click ‘OK’ and exit the dialog box.

Display Modes

Both screen position and size will vary depending on the type of PC monitor and its resolution.

The resolutions in the table are recommended.

D-Sub Input

Mode Resolution Horizontal

Frequency (kHz)

Vertical Frequency

(Hz)

Pixel Clock

Frequency (MHz)

Sync Polarity

(H / V)

IBM 640 x 350

720 x 400 31.469

31.469

70.086

70.087 25.175

28.322

+ / -

- / +

VESA

640 x 480

640 x 480

640 x 480

800 x 600

800 x 600

800 x 600

1024 x 768

1024 x 768

1024 x 768

1280 x 1024

1280 x 1024

1360 x 768

1600 x 1200

31.469

37.861

37.500

37.879

48.077

46.875

48.363

56.476

60.023

63.981

79.976

47.712

75.000

59.940

72.809

75.000

60.317

72.188

75.000

60.004

70.069

75.029

60.020

75.025

60.015

60.000

25.175

31.500

31.500

40.000

50.000

49.500

65.000

75.000

78.750

108.000

135.000

85.500

162.000

- / -

- / -

- / -

+ / +

+ / +

+ / +

- / -

- / -

+ / +

+ / +

+ / +

+ / +

+ / +

CVT 1920 x 1080RB 66.587 59.934 138.500 + / -

HDMI / DVI Input

Mode Resolution Horizontal

Frequency (kHz)

Vertical Frequency

(Hz)

Pixel Clock

Frequency (MHz)

Sync Polarity

(H / V)

VESA

640 x 480

800 x 600

1024 x 768

1280 x 1024

1360 x 768

1600 x 1200

31.469

37.879

48.363

63.981

47.712

75.000

59.940

60.317

60.004

60.020

60.015

60.000

25.175

40.000

65.000

108.000

85.500

162.000

- / -

+ / +

- / -

+ / +

+ / +

+ / +

CEA 1920 x 1080p 67.500 60.000 148.500 + / +

When using an HDMI / DVI cable connection, you must use the HDMI IN 2 jack.

The interlace mode is not supported.

The set might operate abnormally if a non-standard video format is selected.

Separate and Composite modes are supported. SOG is not supported.

Too long or low quality VGA cable can cause picture noise at high resolution modes (1920x1080 or 1600x1200).





N

N

N

N

N

BN68-01737C-Eng.indb 18 2008-08-12 �� 5:47:20

English - 19

Setting up the TV with your PC

Preset: Press the SOURCE button to select PC mode.

Auto Adjustment

Auto Adjustment allows the PC screen of set to self-adjust to the incoming PC

video signal. The values of ne, coarse and position are adjusted automatically.

This function does not work in DVI-HDMI mode.

Press the TOOLS button to display “Tools” menu. You can also set the Auto

Adjustment by selecting “Tools → Auto Adjustment”.

Screen

Coarse / Fine:

The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed

by Fine-tuning alone, then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been

reduced, readjust the picture so that it is aligned on the center of screen.

PC Position:

Adjust the PC’s screen positioning if it does not t the TV screen.

Press the ▲ or ▼ button to adjusting the

Vertical-Position. Press the ◄ or ► button to adjust the Horizontal-Position.

Image Reset:

You can replace all image settings with the factory default values.

N

❑

N

T

❑







Sound Control

Changing the Sound Standard

Mode→Standard/Music/Movie/Speech/Custom

You can select the type of special sound effect to be used when watching a

given broadcast.

Press the TOOLS button to display “Tools” menu. You can also congure

the sound mode by selecting “Tools → Sound Mode”.

Equalizer

The sound settings can be adjusted to suit your personal preferences.

Mode: You can select a sound mode to suit your personal preferences.

Balance: Controls the balance between the right and left speakers.

100Hz / 300Hz / 1kHz / 2kHz / 3kHz / 10kHz (Bandwidth Adjustment): To

adjust the level of different bandwidth frequencies

Reset: Resets the equalizer settings to the default values.

SRSTruSurroundXT→Off/On

TruSurround XT is a patented SRS technology that solves the problem of

playing 5.1 multichannel content over two speakers. TruSurround delivers

a compelling, virtual surround sound experience through any two-speaker

playback system, including internal television speakers. It is fully compatible

with all multichannel formats.

Press the TOOLS button to display “Tools” menu. You can also set the SRS TruSurround XT by selecting “Tools → SRS

TS XT”.

TruSurround XT, SRS and Symbol are trademarks of SRS Labs, Inc. TruSurround XT

technology is incorporated under license from SRS Labs, Inc.

❑

T

❑









❑

T

Brightness : 45

Sharpness : 50

Auto Adjustment

►

Screen

Detailed Settings

Picture Options

Picture Reset

Picture

Mode : Custom

Equalizer

SRS TruSurround XT

:Off ►

Audio Language : ----

Audio Format : ----

Audio Description

Auto Volume : Off

Select Speaker : TV Speaker

Sound Select : Main

Sound Reset

Sound

Select Speaker : TV Speaker

Sound Select : Main

SoundReset  ►

Sound

BN68-01737C-Eng.indb 19 2008-08-12 �� 5:47:20

English - 20

Audio Language

You can change the default value for audio languages. Displays the language information for the incoming stream.

While viewing a digital channel, this function can be selected.

You can only select the language among the actual languages being broadcast.

AudioFormat→MPEG/DolbyDigital

When sound is emitted from both the main speaker and the audio receiver, a sound echo may occur due to the decoding

speed difference between the main speaker and the audio receiver. In this case, use the TV Speaker function.

While viewing a digital channel, this function can be selected.

You can only select the language among the actual languages being broadcast.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are

trademarks of Dolby Laboratories.

Audio Description

This is an auxiliary audio function that provides an additional audio track for visually challenged persons. This function handles

the Audio Stream for the AD (Audio Description), when it is sent along with the Main audio from the broadcaster. Users can

turn the Audio Description On or Off and control the volume.

Audio Description → Off / On: Turn the audio description function on or off.

Volume: You can adjust the audio description volume.

“Volume” is active when “Audio Description” is set to “On”.

While viewing a Digital channel, this function can be selected.

AutoVolume→Off/On

Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is

changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the

modulation signal is high or by raising the sound output when the modulation signal is low.

SelectSpeaker→ExternalSpeaker/TVSpeaker

If you want to hear the sound through separate speakers, cancel the internal amplier.

The volume buttons and MUTE buttons do not operate when the “Select Speaker” is set to “External Speaker”.

If you select “External Speaker” in the “Select Speaker” menu, the sound settings will be limited.

TV's Internal Speakers Audio Out (Optical) to Sound System

RF / AV / S-Video / Component / PC / HDMI RF / AV / S-Video / Component / PC / HDMI

TV Speaker Speaker Output Sound Output

External Speaker Mute Sound Output

Video No Signal Mute Mute

Sound Select

When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.

Main: Used to listen to the sound of the main picture.

Sub: Used to listen to the sound of the sub picture.

Press the TOOLS button to display “Tools” menu. You can also set the sound of the sub picture by selecting “Tools → PIP

→ Sound Select”.

Sound Reset

Reset All / Reset Sound Mode / Cancel:

You can restore the Sound settings to the factory defaults.

❑

N

N

❑

N

N

❑





N

N

❑

❑

N

N

❑





T

❑



BN68-01737C-Eng.indb 20 2008-08-12 �� 5:47:20

English - 21

Selecting the Sound Mode

You can set the sound mode in the “Tools” menu. When you set to “Dual l ll”, the

current sound mode is displayed on the screen.

Audio Type Dual 1 / 2 Default

A2 Stereo

Mono MONO Automatic change

Stereo STEREO ↔ MONO

Dual DUAL 1 ↔ DUAL 2 DUAL 1

NICAM Stereo

Mono MONO Automatic change

Stereo MONO ↔ STEREO

Dual MONO ↔ DUAL 1

DUAL 2 DUAL 1

If the stereo signal is weak and an automatic switching occurs, then switch to the mono.

This function is only activated in stereo sound signal. It is deactivated in mono sound signal.

This function is only available in TV mode.

N

N

N

ConguringtheSetupMenu

Language

You can set the menu language.

ChildLock→On/Off

This feature allows you to prevent unauthorized users, such as children, from

watching unsuitable programme by muting out video and audio.

Before the setup screen appears, the PIN number input screen appears.

Enter your 4 digit PIN number.

The default PIN number of a new TV set is “0-0-0-0”. You can change the

PIN by selecting “Change PIN” from the menu.

You can lock some channels in Channel List. (refer to page 13)

“Child Lock” is available only in TV mode.

Change PIN

You can change your personal ID number that is required to set up the TV.

Before the setup screen appears, the PIN number input screen appears.

Enter your 4 digit PIN number.

The default PIN number of a new TV set is “0-0-0-0”.

If you forget the PIN code, press the remote control buttons in the following

sequence, which resets the PIN to 0-0-0-0: POWER (Off), MUTE, 8, 2, 4,

POWER (On).

❑

❑

N

N

N

N

❑

N

N

N

Function Description

Tools

Anynet+ (HDMI-CEC)

Picture Size : Auto Wide

Picture Mode : Standard

Sound Mode : Custom

Sleep Timer : Off

SRS TS XT : Off

Energy Saving : Off

Dual l ll ◄ Mono ►

U

Move

L

Adjust

e

Exit

Setup

Change PIN

Parental Lock

Subtitle  ►

Teletext Language : ----

Preference

Digital Text : Enable

Light Effect : Watching TV

Wall-Mount Adjustment

Melody : Off

Entertainment : Off

Setup

Plug&Play  ►

Language : English

Time

Network Selection : Cable

Wireless Network Setup

Cable Network Setup

Child Lock : On

Change PIN

Setup

Energy Saving : Off

PIP

SoftwareUpgrade  ►

Common Interface

BN68-01737C-Eng.indb 21 2008-08-12 �� 5:47:21

English - 22

ParentalLock→ParentalRating

This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programme by a 4-digit PIN

(Personal Identication Number) code that is dened by the user.

In the ‘Parental Rating’ screen, congure the parental ratings.

Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit PIN number.

The default PIN number of a new TV set is “0-0-0-0”. You can change the PIN by selecting “Change PIN” from the menu.

When the parental ratings are set, the “

\

” symbol is displayed.

Allow All: Press to unlock all TV ratings.

Block All: Press to lock all TV ratings.

Subtitle

You can activate and deactivate the subtitles. Use this menu to set the Subtitle Mode. “Normal” under the menu is the basic

subtitle and “Hard of hearing” is the subtitle for a hearing-impaired person.

Subtitle → On / Off: Switches subtitles on or off.

Mode → Normal / Hard of hearing: Sets the subtitle mode.

Subtitle Language: Set the subtitle language.

If the programme you are watching does not support the “Hard of hearing” function, “Normal” automatically activates even

though “Hard of hearing” mode is selected.

English is the default in cases where the selected language is unavailable in the broadcast.

You can select these options simply by pressing the SUBT. button on the

remote control.

Teletext Language

You can set the Teletext language by selecting the language type.

English is the default in cases where the selected language is unavailable in the broadcast.

Preference

Primary Audio Language / Secondary Audio Language / Primary Subtitle Language / Secondary Subtitle Language /

Primary Teletext Language / Secondary Teletext Language

Using this feature, users can select one of the languages. The language selected here is the default when the user selects a

channel.

If you change the language setting, the Subtitle Language, Audio Language, and the Teletext Language of the Language

menu are automatically changed to the selected language.

The Subtitle Language, Audio Language, and the Teletext Language of the Language menu show a list of languages

supported by the current channel and the selection is highlighted. If you change this language setting, the new selection is

only valid for the current channel. The changed setting does not change the setting of the Primary Subtitle Language, Primary

Audio Language, or the Primary Teletext Language of the Preference menu.

DigitalText→Disable/Enable(UKOnly)

If the programme is broadcast with digital text, this feature is enabled.

MHEG (Multimedia and Hypermedia Information Coding Experts Group)

An International standard for data encoding systems used in multimedia and hypermedia. This is at a higher level than

the MPEG system which includes data-linking hypermedia such as still images, character service, animation, graphic and

video les as well as multimedia data. MHEG is user runtime interaction technology and is being applied to various elds

including VOD (Video-On-Demand), ITV (Interactive TV), EC (Electronic Commerce), tele-education, tele-conferencing,

digital libraries and network games.

❑

-

N

N

N

N

❑







N

N

O

❑

N

❑



❑

N

TV

SET RESET

VCR DVD STB

BN68-01737C-Eng.indb 22 2008-08-12 �� 5:47:21

English - 23

Light Effect

You can turn on/off the LED on the front of TV according to the situation. Use it

for saving power or when the LED dazzles your eyes.

Off: LED will not come on.

In Standby: Turns the LED on in standby mode.

Watching TV: Turns the LED on while watching TV.

Always: LED is always on.

Set the “Light Effect” to “Off” to reduce the power consumption.

Melody

Off / Low / Medium / High

The TV power on / off melody sound can be adjusted.

The Melody does not play

When no sound is output from the TV because the MUTE button has been pressed.

When no sound is output from the TV because the (–) Volume button has been pressed.

When the TV is turned off by Sleep Timer function.

Entertainment

The “Entertainment” mode enables you to select the optimal display and sound for sports, cinema and games.

Off: Switches the “Entertainment” function off.

Sports: Provides the optimal picture and sound quality for sports.

Cinema: Provides the optimal picture and sound quality for movie watching. You can experience a richer picture and

enhanced sound.

Game: Provides the optimal picture and sound quality for games. This mode accelerates the playing speed when using

an external game console connected to the TV.

If you set any of the three “Entertainment” modes to On, the settings will be locked and can not be adjusted. In addition,

Picture and Sound mode settings are not allowed. If you want to make Picture and Sound mode adjustments, the

“Entertainment” mode must be turned off.

If you set any of the three “Entertainment” modes to On, the sound and picture functions will be limited.

The “Entertainment” settings are saved for each input source.

You can press the E.MODE button on the remote control repeatedly to change

the “Entertainment” setting.

Energy Saving

This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the

“Energy Saving” mode option to “High” to reduce eye fatigue as well as power consumption.

Off: Turns off the energy saving function.

Low: Sets the TV to low energy saving mode.

Medium: Sets the TV to medium energy saving mode.

High: Sets the TV to high energy saving mode.

Auto: Automatically adjusts the brightness of the TV screen in accordance with the scenes.

Press the TOOLS button to display “Tools” menu. You can also set the Energy Saving option by selecting “Tools → Energy

Saving”.

❑









N

❑



N

-

-

-

❑









N

N

N

O

❑











T

TV

SET RESET

VCR DVD STB

88

4

1

2

3

6

5

7

LED

BN68-01737C-Eng.indb 23 2008-08-12 �� 5:47:21

English - 24

Software Upgrade

To keep your product up-to-date with new Digital Television features then

software upgrades are periodically broadcast as part of the normal Television

signal. It will automatically detect these signals and display the software

upgrade banner. You are given the option to install the upgrade.

BY USB

Insert a USB drive containing the rmware upgrade into TV. Please be careful

to not disconnect the power or remove the USB drive while upgrades are being

applied. The TV will turn off and turn on automatically after completing the

rmware upgrade. Please check the rmware version after the upgrades are

complete. When software is upgraded, video and audio settings you have made will return to their default (factory) settings.

We recommend you write down your settings so that you can easily reset them after the upgrade.

BY Channel

Upgrades the software using the broadcasting signal.

Standby Mode Upgrade

To continue software upgrade with master power on, Select On by pressing the ▲ or ▼ button. 45 minutes after entering

standby mode, a manual upgrade is automatically conducted. Since the power of the unit is turned on internally, the screen

may be on slightly for the LCD product. This phenomenon may continue for more than 1 hour until the software upgrade is

completed.

Alternative Software

To display the software version information.

Common Interface

CI Menu

This enables the user to select from the CAM-provided menu.

Select the CI Menu based on the menu PC Card.

Application Info.

This contains information on CAM inserted in the CI slot and displays it.

The Application Info inserting is about the CI CARD. You can install the CAM

anytime whether the TV is ON or OFF.

1. Purchase the CI CAM module by visiting your nearest dealer or by phone.

2. Insert the CI CARD into the CAM in the direction of the arrow until it ts.

3. Insert the CAM with the CI CARD installed into the common interface slot.

(Insert the CAM in the direction of the arrow, right up to the end so that it is

parallel with the slot.)

4. Check if you can see a picture on a scrambled signal channel.

❑









❑





TV Side Panel

USB Drive

BN68-01737C-Eng.indb 24 2008-08-12 �� 5:47:21

English - 25

Setting the Time

Clock

Setting the clock is necessary in order to use the various timer features of the

TV.

The current time will appear every time you press the INFO button.

If you disconnect the power cord, you have to set the clock again.

Clock Mode

You can set up the current time manually or automatically.

Auto: Set the current time automatically using the time from the digital

broadcast.

Manual: Set the current time to a manually specied time.

Clock Set

You can set the current time manually.

Set up this item when you have set “Clock Mode” to “Manual”.

You can set the day, month, year, hour and minute directly by pressing the

number buttons on the remote control.

SleepTimer→Off/30/60/90/120/150/180

The sleep timer automatically shuts off the TV after a preset time (30, 60, 90,

120, 150 and 180 minutes).

The TV automatically switches to standby mode when the timer reaches 0.

To cancel the “Sleep Timer” function, select “Off”.

Press the TOOLS button to display “Tools” menu. You can also set the sleep timer by selecting “Tools → Sleep Timer”.

Timer 1 / Timer 2 / Timer 3

Three different on / off timer settings can be made.

On Time:

Set the hour, minute, and activate / inactivate.

(To activate timer with the setting you’ve chosen, set to “Activate”.)

Off Time:

Set the hour, minute, and activate / inactivate.

(To activate timer with the setting you’ve chosen, set to “Activate”.)

Volume:

Set the required volume level.

Contents:

When the “On Time” is active, you can turn on a specic channel or play back contents such as photo or audio

les.

TV / USB: Select TV or USB. (Make sure that an USB device is connected to your TV.)

Antenna: Select ATV or DTV.

Channel: Select the desired channel.

Music: Select the folder containing MP3 les on the USB device.

Photo: Select the folder containing JPEG les on the USB device.

Repeat:

Select “Once”, “Everyday”, “Mon~Fri”, “Mon~Sat”, “Sat~Sun”, or “Manual”.

When “Manual” is selected, press the ► button to select the desired day of the week. Press the ENTER

E

button over

the desired day and the c mark will appear.

You must set the clock rst.

You can set the hour, minute and channel by pressing the number buttons on the remote control.

Auto Power Off

When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was

turned on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is

on for too long time.

❑

N

N



•

•



N

N

❑

N

N

T

❑









•

•

•

•

•



N

N

N

N

Setup

Plug & Play

Language : English

Time  ►

Network Selection : Cable

Wireless Network Setup

Cable Network Setup

Child Lock : On

Change PIN

Parental Lock

Subtitle

Time

Clock : -- : -- ►

Sleep Timer : Off

Timer 1 : Inactivated

Timer 2 : Inactivated

Timer 3 : Inactivated

U

Move

E

Enter

R

Return

BN68-01737C-Eng.indb 25 2008-08-12 �� 5:47:21

English - 26

Network Connection

Network Connection - Cable

Cable Connection for a DHCP Environment

The procedures to set up the network using Dynamic Host Conguration Protocol (DHCP) are described below. Since an IP

address, subnet mask, gateway, and DNS are automatically allocated when DHCP is selected, you do not have to enter them

manually.

1. Connect the [LAN] port on the rear panel of the TV and the external modem with a LAN Cable.

2. Connect the LAN port on the wall and the external modem with a Modem Cable.

The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer.

If the IP address allocation by the DHCP server has failed, turn the external modem off, turn it on again after at least 10

seconds and then try again.

For the connections between the external modem and the Sharer (Router), refer to the owner’s manual of the corresponding

product.

You can connect the TV to the LAN directly without connecting it through a Sharer (Router).

You cannot use a manual-connection-type ADSL modem becaus;e it does not support DHCP. You have to use an automatic-

connection-type ADSL modem.



N

N

N

N

N

TV Rear Panel

The Modem

Port on the Wall

External Modem

(ADSL / VDSL / Cable TV)

IP Sharer

LAN Cable

Modem Cable

TV Rear Panel

LAN Cable

You can connect the LAN port and the TV directly depending on your network status.

The LAN Port

on the Wall

You can connect the LAN via a Sharer (Router).

LAN Cable

TV Rear Panel

The Modem Port

on the Wall

Modem Cable

2

External Modem

(ADSL / VDSL / Cable TV)

LAN Cable

1

BN68-01737C-Eng.indb 26 2008-08-12 �� 5:47:23

English - 27

LAN Connection for Static IP Environment

The procedures to set up the network using a static IP address are described below. You have to manually enter the IP

address, subnet mask, gateway, and DNS that are provided by your Internet Service Provider (ISP).

1. Connect the [LAN] port on the rear panel of the TV and the LAN port on the wall using the LAN cable.

The terminals (the position of the port and the type) of the external device may differ depending on the manufacturer.

If you are using a static IP address, your ISP will inform you of the IP address, subnet mask, gateway, and DNS. You must

enter these values to complete the network settings. If you do not know the values, ask your network administrator.

For the information on how to congure and connect a Sharer (Router), refer to the owner’s manual for the corresponding

product.

You can connect the TV to the LAN directly without connecting it through a Sharer (Router).

If you use an IP Sharer (IP Router) that supports DHCP, you can set up the device as either DHCP or static IP.

For the procedures to use a static IP address, ask your Internet Service Provider.

Network Connection - Wireless

You can connect to the network wirelessly through a wireless IP sharer.

1. Connect the ‘Samsung Wireless LAN Adapter’ into the Wiselink terminal of the TV.

You must use the ‘Samsung Wireless LAN Adapter’(WIS-08BG) to use a wireless network.

The ‘Samsung Wireless LAN Adapter’ is sold separately. Contact a Samsung Electronics agent or service center for

purchasing.

To use a wireless network, your TV must be connected to a wireless IP sharer.

If the wireless IP sharer supports DHCP, you TV can use a DHCP or static IP address to connect to the wireless network.

You must use a wireless IP sharer that supports IEEE 802.11 B or IEEE 802.11G.

If the wireless IP sharer allows you to turn on / off the Ping connection function, turn it on.

Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.

Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer is

currently being used by another device nearby, this will result in interference and communications may fail.

When applying the security key for the AP (wireless IP sharer), only the following is supported.

1) Authentication Mode : WEP, WPAPSK, WPA2PSK

2) Encryption Type : WEP, TKIP, AES

If you apply a security system other than the systems listed above, it will not work with the TV.



N

N

N

N

N

N

N

N

N

N

N

N

N

N

N

TV Rear Panel

LAN Cable

1

The LAN Port

on the Wall

TV Rear Panel

LAN Cable

IP Sharer

LAN Cable

The LAN Port

on the Wall

You can connect the LAN via a Sharer (Router).

TV Side Panel

LAN

Cable

Wireless IP sharer

The LAN Port on

the Wall

Samsung Wireless

LAN Adapter

BN68-01737C-Eng.indb 27 2008-08-12 �� 5:47:24

English - 28

Network Setup

Network Selection

Select Cable or Wireless as the method to connect to the network.

The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is

connected. (See page 26)

Cable:

Connect to network using a cable.

Wireless:

Connect to network wirelessly.

Cable Network Setup

Internet Protocol Setup → Auto Setup / Manual Setup

Network Test:

You can test or conrm the network connection status after setting up the network.

When unable to connect to a wired network

If your Internet service provider has registered the MAC address of the device used to connect to the Internet for the rst

time and authenticates the MAC address each time you connect to the Internet, your TV may not be able to connect to

the Internet as the MAC address differs from that of the device (PC) used to connect to the Internet the rst time. In this

case, ask your Internet service provider about the procedures to connect devices other than your PC (such as your TV) to

the Internet. If your Internet service provider requires an ID or password to connect to the Internet (network), your TV may

not be able to connect to the Internet. In this case, you have to enter your ID or password when connecting to the Internet

using an Internet Sharer (Router).

The internet connection may fail due to a rewall problem. In this case, contact your Internet service provider. If you

cannot connect to the Internet even if you have followed the procedures of your Internet service provider, please contact a

Samsung Electronics Service Center.

Wireless Network Setup

Internet Protocol Setup → Auto Setup / Manual Setup

Network Test: You can test or confirm the network connection status after setting up the network.

When unable to connect to a wireless network

Your TV may fail to locate an AP that is congured as a private SSID type. In this case, please change the AP settings and

try again. If your Internet service provider has registered the MAC address of the device used to connect to the Internet

for the rst time and authenticates the MAC address each time you connect to the Internet, your TV may not be able to

connect to the Internet as the MAC address differs from that of the device (PC) used to connect to the Internet the rst

time. In this case, ask your Internet service provider about the procedures to connect devices other than your PC (such

as your TV) to the Internet. If you cannot connect to the Internet even if you have followed the procedures of your Internet

service provider, please contact a Samsung Electronics Service Center.

Select Access Point:

You can select the IP sharer to use when using a wireless network.

If a wireless Access Point is not in the Access Point list, press the Red button.

When the connection is made, you will be returned to the screen automatically.

If you selected an Access Point that requires security authentication, enter the security key.

If you have selected an Access Point with a security authentication:

The Security Key input screen appears.

Enter the security key and press the ENTERE button.

Using the Remote Control Buttons on the Security Key Input Screen.

Cable Network Setup-Auto Setup

If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically congured. Please check

if the LAN cable is connected. (See page 26)

1. Set “Network Selection” to “Cable”.

2. Select “Cable Network Setup”.

3. Set “Internet Protocol Setup” to “Auto Setup”.

4. Select “Network Test” to check the network connectivity.

❑

N





❑





N

❑





N



N

N

N

N

-

-

-

Setup

Language : English

Time

NetworkSelection :Cable ►

Wireless Network Setup

Cable Network Setup

Child Lock : On

Change PIN

Parental Lock

Subtitle

Teletext Language : - - - -

BN68-01737C-Eng.indb 28 2008-08-12 �� 5:47:24

English - 29

Cable Network Setup-Manual Setup

To connect the TV to the LAN using a static IP address, you must set up the Internet Protocol (IP). Please check if the LAN cable is

connected. (See page 27)

1. Set “Network Selection” to “Cable”.

2. Select “Cable Network Setup”.

3. Set “Internet Protocol Setup” to “Manual Setup”.

4. Set up “IP Address”, “Subnet Mask”, “Gateway” and “DNS Server”.

Press the number buttons on the remote control when you set the Network manually.

5. Select “Network Test” to check the network connectivity.

Wireless Network Setup-Auto Setup

The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is connected. (See page 27)

If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically congured. The wireless

IP sharer to be connected to this product must support DHCP.

1. Set “Network Selection” to “Wireless”.

2. Select “Wireless Network Setup”.

3. Set “Internet Protocol Setup” to “Auto Setup”.

4. Select an AP through “Select Access Point”.

5. Select “Network Test” to check the network connectivity.

Wireless Network Setup-Manual Setup

The menu is activated only if the ‘Samsung Wireless LAN Adapter’ is connected. (See page 27)

1. Set “Network Selection” to “Wireless”.

2. Select “Wireless Network Setup”.

3. Set “Internet Protocol Setup” to “Manual Setup”.

4. Select an AP through “Select Access Point”.

5. Select “Network Test” to check the network connectivity.

N

Source List / Edit Name

Source List

Use to select TV or other external input sources such as DVD players or Cable

Box / Satellite receivers (Set-Top Box) connected to the TV. Use to select the

input source of your choice.

TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI1, HDMI2 / DVI,

HDMI3, HDMI4, USB, DLNA.

You can choose only those external devices that are connected to the TV.

In the “Source List”, connected inputs will be highlighted and sorted to the

top. Inputs that are not connected will be sorted to the bottom.

Using the Colour buttons on the remote with the Source list

Red (Refresh): Refreshes the connecting external devices.

TOOLS (Option): Displays the “Edit Name” and “Information” menus.

Press the SOURCE button on the remote control to view an external signal

source. TV mode can be selected by pressing the TV button, number

buttons (0~9), and the P < / > button on the remote control.

Edit Name

VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / TV / IPTV / Blu-ray / HD

DVD / DMA

Name the device connected to the input jacks to make your input source selection easier.

When a PC with a resolution of 1920 x 1080@60Hz is connected to the HDMI IN 2 port, you should set the “HDMI2 / DVI”

mode to “PC” in the “Edit Name” of the “Input” mode.

❑



N

N

-

-

O

❑



N

TV

SET RESET

VCR DVD STB

TV

SET RESET

VCR DVD STB

Source List

Edit Name

Input

BN68-01737C-Eng.indb 29 2008-08-12 �� 5:47:25

English - 30

Product Guide

The Product Guide gives you information on the most important features of this TV.

1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select

“Application”, then press the ENTER

E

button.

2. Press the ▲ or ▼ button to select “Product Guide”, then press the ENTER

E

button.

3. Press the ◄ or ► button to select a Guide (“Picture Quality”, “Entertainment” or

“Connectivity”) and press the ENTER

E

button.

4. You can navigate the Product Guide screen by using the ◄ and ► buttons.

Picture Quality Full HD 1080p

100Hz Motion Plus

LED

Entertainment Content Library

Entertainment Mode

Connectivity WISELINK Pro

DLNA

4HDMI

Anynet+

5. Press the EXIT button to exit.

Using the Remote Control Button in Product Guide Menu

Button Operations

Yellow Button Shows the contents of the Product Guide sequentially. (AutoPlay)

Wheel (◄/►) Move the cursor and select an item.

ENTER

E

Select the currently selected item.

RETURN Return to the previous menu.

EXIT Stop the current function and return to the “Product Guide” main menu.

WISELINK Pro

Connecting a USB Device

1. Press the POWER button to turn the TV on.

2. Connect a USB device containing photo, music and/or movie les to the

WISELINK jack (USB jack) on the side of the TV.

If you enter the WISELINK Pro mode with no USB device connected the

message ‘No external storage device found. Check the connection status.’

will appear. In this case, insert the USB device, exit the screen by pressing

the W.LINK button on the remote control and enter the WISELINK Pro screen

again.

MTP (Media Transfer Protocol) is not supported.

The le system only supports FAT16/32 (The NTFS le system is not supported).

Certain types of USB Digital camera and audio devices may not be compatible with this TV.

WISELINK Pro only supports USB Mass Storage Class devices (MSC). MSC is a Mass Storage Class Bulk-Only Transport

device. Examples of MSC are Thumb drives and Flash Card Readers (Both USB HDD and HUB are not supported.)

Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB

compatibility problem.

N

N

N

N

N

N

Application

Anynet+ (HDMI-CEC)

Content Library

ProductGuide  ►

TV Side Panel

USB Drive

BN68-01737C-Eng.indb 30 2008-08-12 �� 5:47:25

English - 31

Using the WISELINK Pro Function

This function enables you to view and listen to photo, music and/or movie les saved on a USB Mass Storage Class (MSC) device.

Entering the WISELINK Pro Menu

1. Press the MENU button. Press the ▲ or ▼ button to select “Application”, then

press the ENTER

E

button.

2. Press the ▲ or ▼ button to select “WISELINK Pro”, then press the ENTER

E

button.

The “WISELINK Pro” menu is displayed.

Press the W.LINK button on the remote control to display the “WISELINK Pro”

menu.

Press the SOURCE button on the remote control repeatedly to select “USB”,

then press the ENTER

E

button.

3. Press the Red button, then press the ▲ or ▼ button to select the corresponding USB Memory Device (i.e. if connected

through a hub). Press the ENTER

E

button.

This function differs depending on the USB Memory Device / DLNA device connected to TV.

The selected USB device name appears at the bottom left of the screen.

4. Press the ◄ or ► button to select an icon (Photo, Music, Movie, Setup), then press the ENTER

E

button. To exit “WISELINK

Pro” mode, press the W.LINK button on the remote control.

Removing a USB Memory Device Safely

You can remove the device safely from the TV.

1. Press the TOOLS button in the WISELINK Pro le list screen, or while a Slide

Show, music or movie is being played.

2. Press the ▲ or ▼ button to select “Remove Safely”, then press the ENTER

E

button.

3. Remove the USB device from the TV.

N

O

O

N

N

Before connecting your device to the TV, please back up your les to prevent them from damage or loss of data. SAMSUNG is

not responsible for any data le damage or data loss.

Do not disconnect the USB device while it is loading.

MSC supports MP3 and JPEG les, while a PTP device supports JPEG les only.

The sequential JPEG format is supported.

The higher the resolution of the image, the longer it takes to display on the screen.

The maximum supported JPEG resolution is 15360X8640 pixels.

For unsupported or corrupted les, the ‘Not Supported File Format’ message is displayed.

If the number of photo les exceeds 4000 (or the number of music les exceeds 3000), any les exceeding the 4000 limit may

not be displayed in the Photo List (or Music List).

MP3 les with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM)

is a technology that supports the creation of content, the distribution and management of the content in an integrated and

comprehensive way, including the protection of the rights and interests of the content providers, the prevention of the illegal

copying of contents, as well as managing billings and settlements.

When moving to a photo, loading may take a few seconds. At this point, the loading icon will appear at the screen.

N

N

N

N

N

N

N

N

N

N

Photo

SUM



Device



Favourites Setting



Select

Jump

Option

image_1.jpg

Month : Jan

Date : Jan.01.2008

Color : Gray

Composition :

Folder : P-other

Favourites : ★ ★ ★

Preference

Monthly

Timeline

Jan Nov

▲

▲

Play Current Group

Delete

Information

Remove Safely

WISELINK Pro

Photo

SUM



Device

Return

Music Setup

PHOTO

SUM

851.98MB/995.00MB Free

Movie

TV

SET RESET

VCR DVD STB

TV

SET RESET

VCR DVD STB

BN68-01737C-Eng.indb 31 2008-08-12 �� 5:47:26

English - 32

Screen Display

1. Currently selected le: The currently selected le is highlighted. Photo and movie les are displayed as thumbnail images.

2. Information Window: Shows information about the currently selected le. There is a separate information window for photo and

movie les only. For music les, the le information is also displayed in the location where the le is displayed.

3. Current Sort Standard: This eld shows the current standard for sorting les. Press the ▲ or ▼ button to change the standard

for sorting les.

4. View Groups: Shows the sorting groups. The sorting group including the currently selected photo is highlighted.

5. Current Device: Shows the currently selected device name. Press the Red button to select a device.

6. Item Selection Information: Shows the number of photos that are selected by pressing the Yellow button.

7. Help Items

Red (Device) button: Selects a connected device.

Green (Favourites Setting) button: Changes the favourites setting for the selected le. Press this button repeatedly until

the desired value appears.

Yellow (Select) button: Selects le from the le list. Selected les are marked with a symbol c. Press the yellow button

again to cancel a le selection.

πµ (Jump) button: Jumps to the previous sorting group/Jumps to the next sorting group.

TOOLS (Option) button: Displays the option menus. (The option menu changes according to the current status.)

•

•

•

•

•

Using the Remote Control Button in WISELINK Pro Menu

Button Operations

▲/▼/◄/►/wheel Move the cursor and select an item.

ENTER

E

Select the currently selected item.

While playing a slide show, movie, or music le:

- Pressing the ENTER

E

button during play pauses the play.

- Pressing the ENTER

E

button during pause resumes the play.

∂

/

∑

Play or pause the Slide Show, music or movie.

RETURN Return to the previous menu.

TOOLS Run various functions from the Photo, Music and Movie menus.

∫

Stop the current slide show, Music or Movie le.

π

/

µ

Jump to previous group/Jump to next group.

INFO Show le information.

W.LINK Exit WISELINK Pro mode.

P

>/<

, PRE-CH Stop WISELINK Pro mode and Returns to TV mode.

EXIT Stop the current function and return to the WISELINK Pro main menu.

Photo

SUM



Device



Favourites Setting



Select

Jump

Option

image_1.jpg

Month : Jan

Date : Jan.01.2008

Color : Gray

Composition :

Folder : P-other

Favourites :

★ ★ ★

Preference

Monthly

Timeline

Jan Nov

▲

1File(s) Selected

2 6

1

3 4

5 7

BN68-01737C-Eng.indb 32 2008-08-12 �� 5:47:27

English - 33

Using and Sorting Photo List

You can sort photos in the Photo List by a particular standard.

1. Press the ▲ or ▼ button to select a sorting standard in the Photo list.

The photos are sorted according to the newly selected sorting standard.

To move to the previous/next group, press the

π

(REW) or

µ

(FF)

button.

2. Press the

∂

(Play)/ENTER

E

button to start the Slide Show in the order

selected by the user.

The information of a photo le is automatically set.

The “Color” and “Composition” information extracted from a photo le

may be different from the user’s expectations.

Photo information is automatically set. You can change the “Color”,

“Composition”, and “Favourites”.

Photos for which information cannot be displayed are set as

“Unclassied”.

PTP does not support folder sort mode.

Sorting Standard for the Photo List

Monthly

It sorts and shows photos in the le by month. It sorts only by month (from January to December) regardless of year.

Timeline

It sorts and shows photos by date. It sorts by year and month from the earliest photo.

Color

It Sorts photos by color. You can change the photo color information.

“Color” options: Red, Yellow, Green, Blue, Magenta, Black, Gray, Unclassied.

Composition

It Sorts photos by composition. You can change the compositional information of photos.

“Composition” options: (horizontal), (vertical), (object), (perspective), (pattern), Unclassied.

Folder

It Sorts photos by folder. If there are many folders in USB, the photos les are shown in order in each folder. The photo le in

the Root folder is shown rst and the others are shown in alphabetical order by name.

Preference

It Sorts photos by preference (Favourites). You can change the photo preferences.

Changing the Favourites setting

Select the desired photo in the Photo list, then press the Green button repeatedly until the desired setting appears.

“Favourites” options:

★ ★ ★

,

★ ★ ★

,

★ ★ ★

,

★ ★ ★

Photo List Option Menu

Slide Show

Using this menu, you can play a SlideShow using the photo les on the USB

memory device.

Play Current Group

Using this menu, you can play a SlideShow using only the photo les in the

currently selected sorting group.

Delete

Using this menu, you can delete the selected photo les.

Change Group

You can change the “Color” and “Composition” information of photo les.

The group information of the current le is updated and the le is moved to the new group.

To change the information of multiple les, select the les you want by pressing the yellow button.

N

N

N

N

N

N

N







N



N





N

N









N

N

Photo

SUM



Device



Favourites Setting



Select

Jump

Option

image_1.jpg

Month : Jan

Date : Jan.01.2008

Color : Gray

Composition :

Folder : P-other

Favourites : ★ ★ ★

Preference

Monthly

Timeline

Jan Nov

▲

Photo

SUM



Device



Favourites Setting



Select

Jump

Option

image_1.jpg

Month : Jan

Date : Jan.01.2008

Color : Gray

Composition :

Folder : P-other

Favourites : ★ ★ ★

Preference

Monthly

Timeline

Jan Nov

▲

Slide Show

Play Current Group

Delete

Information

▼

BN68-01737C-Eng.indb 33 2008-08-12 �� 5:47:28

English - 34

Information

The photo le information including the name, the size, the resolution, the date modied and the path is displayed.

You can view the information of photo les during a SlideShow using the same procedures.

Alternatively, select a photo from the photo list and press the INFO button

to view the information.

Remove Safely

You can remove the device safely from the TV.



N

O



Viewing a Photo or Slide Show

Viewing a Slide Show

1. Press the ◄ or ► button to select the desired photo in the Photo list.

2. Press the TOOLS button.

3. Press the ▲ or ▼ button to select “Slide Show”, then press the ENTER

E

button.

All les in the photo list will be used for the Slide Show.

During the slide show, les are displayed in order from the currently shown

le.

The Slide Show progresses in the order sorted in the Photo list.

Music les can be automatically played during the Slide Show if the

“Background Music” is set to “On”. (Refer to page 35).

While a photo list is displayed, press the

∂

(Play)/ENTER

E

button on the

remote control to start slide show.

SlideShow Control Buttons

ENTER

E

Play/Pauses the Slide Show.

∫

Exit Slide Show and return to the photo list.

∂

Play the Slide Show. TOOLS Run various functions from the Photo menus.

∑

Pause the Slide Show.

π

/

µ

Change the SlideShow playing speed.

Playing current group

1. Press the ▲ or ▼ button to select a sorting standard. (“Monthly”, “Timeline”, “Color”, “Composition”, “Folder”, “Preference”)

2. Press the

π

(REW) or

µ

(FF) button to select the desired group.

3. Press the TOOLS button.

4. Press the ▲ or ▼ button to select “Play Current Group”, then press the ENTER

E

button.

Only the photos in the sorting group including the selected les will be used for the Slide Show.

ToperformaSlideShowwithonlytheselectedles

1. Press the ◄ or ► button to select the desired photo in the Photo list.

2. Press the yellow button. Repeat the above operation to select multiple photos.

The

c

mark appears to the left of the selected photo.

If you select one le, the SlideShow will not be performed.

To deselect all selected les, press the TOOLS button and select “Deselect All”.

3. Press the

∂

(Play)/ENTER

E

button.

The selected les will be used for the Slide Show.

N

N

N

N

O

N

N

N

N

N

O

SUM

E

Pause

Previous

Next

Option

Return

►

Normal



20/22 image_1.jpg 440x440 2.0KB 2008/1/1

TV

SET RESET

VCR DVD STB

TV

SET RESET

VCR DVD STB

BN68-01737C-Eng.indb 34 2008-08-12 �� 5:47:28

English - 35

Slide Show Option Menu

Stop Slide Show/Start Slide Show

You can start or stop a SlideShow.

Rotate

You can rotate photos saved on a USB memory device.

Whenever you press the ◄ button, it rotates by 270˚, 180˚, 90˚, and 0˚.

Whenever you press the ► button, it rotates by 90˚, 180˚, 270˚, and 0˚.

If you have select “Zoom”, the “Rotate” deactivated.

Zoom

You can magnify photos saved on a USB memory device. (x1 → x2 → x4)

To move the enlarged photo image, press the ENTER

E

button, then

press the ▲/▼/◄/► buttons. Note that when the enlarged picture

is smaller than the original screen size, the location change function

doesn’t work.

The enlarged le is not saved.

Slide Show Speed

You can select the slide show speed.

You can select the Slide Show speed only during a slide show.

You can also change the speed of the Slide Show by pressing the

π

(REW) or

µ

(FF) button during the Slide Show.

Background Music → On/Off

If you set “Background Music” to On, the background music will be played when viewing photos one by one or in a Slide Show.

If you set “Background Music” to On, a screen appears immediately where you can set the Background Music.

To use this feature, there must be music and photo les stored on the USB device.

Background Music Setting

You can select background music when watching a SlideShow.

If you turn off the “Background Music”, even if the “Background Music Settings” have been set up, the background music

will not be played.

Loading music les is needed to change BGM mode. Play music les in music category to load.

BGM Mode → Mood/Selected File/Shufe

BGM Mood → Energetic/Rhythmical/Sad/Exciting/Calm

If you set “BGM Mode” to “Mood”, you can select a mood.

You cannot select a mood not part of the music les on the USB memory device.

Select Music File

If you set “BGM Mode” to “Selected File”, you can select a music le.

Picture Setting/Sound Setting

Refer to page 41.

Information

The photo le information is displayed.

Remove Safely

You can remove the device safely from the TV.





N

N

N



N

N



N

N





N

N

•

•

N

N

•

N







Tools

Stop Slide Show

Rotate

Zoom

Slide Show Speed : Normal

Background Music : Off

Background Music Setting

Picture Setting

Sound Setting

Information

U

Move

E

Enter

e

Exit

BN68-01737C-Eng.indb 35 2008-08-12 �� 5:47:28

English - 36

Using and Sorting the Music List

You can sort music les in the Music List by a particular standard.

1. Press the ▲ or ▼ button to select a sorting standard in the Music list.

Music les are sorted according to the newly selected sorting standard.

To move to the previous/next group, press the

π

(REW) or

µ

(FF)

button.

2. Press the ENTER

E

button to start playing music in the order selected by

the user.

The information of the music les is automatically set.

The “Mood” information extracted from a music le may differ from the

expectations of the user.

Music information is automatically set. You can change the “Mood” and

“Favourites”.

Music les for which information cannot be displayed are set to “Unclassied”.

If there is no title information for a music le, the lename is displayed.

If no information is available for the Genre, Artist, Album, or Year, the corresponding item is displayed as blank.

Sorting Standard for the Music List

Title: It sorts the Music titles in symbol/Number/alphabet/special order, and shows the music file.

Artist: It sorts the music file by artist in symbol/Number/alphabet/special order.

Mood: It sorts music files by the mood. You can change the music mood information.

“Mood” options: Energetic, Rhythmical, Sad, Exciting, Calm, Unclassied

Genre: It sorts music files by the genre.

Folder: It sorts music files by the folder. If there are many folders in USB, the files are shown in order in each folder.

The music file in the Root folder is shown first and the others are shown in alphabetical order by name.

Preference: It sorts music files by preference (Favourites). You can change the music files preferences.

Changing the Favourites setting

Select the desired music le in the Music list, then press the Green button repeatedly until the desired setting appears.

To change the information of multiple les, select les by pressing the yellow button.

“Favourites” options:

★ ★ ★

,

★ ★ ★

,

★ ★ ★

,

★ ★ ★

Music List Option Menu

Play Current Group: Using this menu, you can only play music files in

the currently selected sorting group.

Delete: Using this menu, you can delete the selected music files.

Change Group: You can change the mood information of music files.

The group information of the current file is updated and the file is

moved to the new group.

To change the information of multiple les, select les by pressing the

yellow button.

Information: The music file information including the name, the size, the

date modified and the path is displayed.

You can view the information of music les during a SlideShow using

the same procedures.

Alternatively, select a music le from the music list and press the INFO

button to view the information.

Remove Safely: You can remove the device safely from the TV.

N

N

N

N

N

N

N

N







N







N

N

N







N



N

O



Music

SUM



Device



Favourites Setting



Select

Jump

Option

Preference

Title

Artist

Energetic ★ ★ ★

Jee

Album 1

2005

Pop

Thanks

Sad ★ ★ ★

Darby

Album 2

2005

Pop

I Love You

Calm ★ ★ ★

Catherine

Album 3

2005

Pop

Better than yesterday

F G H I J L P S T V

▲

Music

SUM



Device



Favourites Setting



Select

Jump

Option

Artist

Mood

Genre

Sad ★ ★ ★

Jee

Album 1

2005

Pop

Thanks

Sad ★ ★ ★

Darby

Album 2

2005

Pop

I Love You

Exciting ★ ★ ★

Catherine

Album 3

2005

Pop

Better than yesterday

Rhythmical Sad Exciting Calm ...

▲

Play Current Group

Delete

Change Group

Information

▼

TV

SET RESET

VCR DVD STB

BN68-01737C-Eng.indb 36 2008-08-12 �� 5:47:28

English - 37

Playing a Music

Playingamusicle

1. Pressing the ◄ or ► button to select a music le to be played,

2. Press the

∂

(Play)/ENTER

E

button.

This menu only shows les with the MP3 le extension. Files with other

le extensions are not displayed, even if they are saved on the same

USB device.

π

(REW) or

µ

(FF) buttons do not function during play.

The selected le is displayed at the top with its playing time.

To adjust the music volume, press the volume button on the remote

control. To mute the sound, press the MUTE button on the remote

control.

The playing duration of a music le may be displayed as ‘00:00:00’ if its playing time information is not found at the start of

the le.

Music Play Control Buttons

ENTER

E

Play/Pauses the music le.

∫

Exit play mode and return to the music list.

∂

Play the music le TOOLS Run various functions from the Music menus.

∑

Pause the music le

Music function information icon

When all music les in the folder (or the selected le) are repeated. “Repeat Mode” is “On”.

When all music les in the folder (or the selected le) are played once. “Repeat Mode” is “Off”.

Playing the music group

1. Press the ▲ or ▼ button to select a sorting standard.

(“Title”, “Artist”, “Mood”, “Genre”, “Folder”, “Preference”)

2. Press the

π

(REW) or

µ

(FF) button to select the desired group.

3. Press the TOOLS button.

4. Press the ▲ or ▼ button to select “Play Current Group”, then press the ENTER

E

button.

The music les in the sorting group including the selected le are played.

Playingtheselectedmusicles

1. Press the ◄ or ► button to select the desired music le in the music list.

2. Press the yellow button. Repeat the above operation to select multiple music les.

The

c

mark appears to the left of the selected music le.

3. Press the

∂

(Play)/ENTER

E

button.

Only the selected le is played.

Music Play Option Menu

Repeat Mode → On/Off

You can play music les repeatedly.

Picture Setting/Sound Setting

Refer to page 41.

Information

The music le information is displayed.

Remove Safely

You can remove the device safely from the TV.

N

N

N

N

N

N

N

N

N

N









SUM

Pause

Previous

Next

Option

Return



7/14 00:01:15 00:05:41

I Love You

Tools

Repeat Mode

◄ On ►

Picture Setting

Sound Setting

Information

Remove Safely

U

Move

L

Adjust

e

Exit

BN68-01737C-Eng.indb 37 2008-08-12 �� 5:47:29

English - 38

Using and Sorting the Movie List

You can sort movies in the Movie List by a particular standard.

1. Press the ▲ or ▼ button to select a sorting standard in the Movie list.

The movie les are sorted according to the newly selected sorting

standard.

To move to the previous/next group, press the

π

(REW) or

µ

(FF)

button.

2. Press the

∂

(Play)/ENTER

E

button to play the movie in the order

selected by the user.

The movies are sorted according to the newly selected sorting standard.

Movie information is automatically set. You can change the “Favourites”.

Sorting Standard for the Movie List

Title

It sorts and displays the Movie titles in symbol/Number/alphabet/special order.

Timeline

It sorts and shows movies by date. It sorts by year and month from the earliest movie.

Folder

If there are many folders in USB, the movies les are shown in order in each folder. The movie le in the Root folder is shown

rst and the others are shown in alphabetical order by name.

Preference

It sorts movies by preference. (Favourites) You can change the movie preferences.

Changing the Favourites setting

Select the desired movie le in the movie list, then press the Green button repeatedly until the desired setting appears.

“Favourites” options:

★ ★ ★

,

★ ★ ★

,

★ ★ ★

,

★ ★ ★

Movie List Option Menu

Play Current Group

Using this menu, you can only play movie les in the currently selected

sorting group.

Delete

Using this menu, you can delete the selected movie les.

Information

The movie le information including the name, the size, the date modied

and the path is displayed.

Alternatively, select a movie le from the movie list and press the INFO

button to view the information.

Remove Safely

You can remove the device safely from the TV.

N

N

N

N









N

N







N



Movie

SUM



Device



Favourites Setting



Select

Jump

Option

movie_1.jpg

Date : Jan.01.2008

Folder : movie-folder

Favourites : ★ ★ ★

Preference

Title

Timeline

A M

SYMBOL

▲

□

ENG

Movie

SUM



Device



Favourites Setting



Select

Jump

Option

movie_1.jpg

Date : Jan.01.2008

Folder : movie-folder

Favourites : ★ ★ ★

Preference

Title

Timeline

A M

SYMBOL

▲

□

ENG

Play Current Group

Delete

Information

Remove Safely

TV

SET RESET

VCR DVD STB

BN68-01737C-Eng.indb 38 2008-08-12 �� 5:47:29

English - 39

Playing a Movie File

Playingamoviele

1. Pressing the ◄ or ► button to select a movie to be played,

2. Press the

∂

(Play)/ENTER

E

button.

The selected  le is played.

The selected  le is displayed at the top with its playing time.

The playing duration of a movie  le may be displayed as ‘00:00:00’ if its

playing time information is not found at the start of the  le.

You can watch exciting gaming multimedia  les, but the gaming function

is not supported.

Movie doesn’t support subtitles. (for example, not support smi, srt and sub  les, etc and not support subtitles included in

movie  les)

Supported Video Formats

Container Type Video Codec Audio codec

Video Codec Type Resolution (Max) Frame Rate

avi

XviD 720 x 576

24/25/30 AC3, MPEG1 (Layer

1, 2, 3), PCM

MPEG2 720 x 576

H.264 HP 1920 x 1088

MPEG-4 ASP 720 x 576

mp4 H.264 HP 1920 x 1088 24/25/30 ADPCM (MS, IMA),

AAC LC

MPEG-4 ASP 720 x 576 24/25/30

PS MPEG2 1920 x 1088 24/25/30 AC3, MPEG1 (Layer

1, 2, 3), LPCM

TS MPEG2 1920 x 1088 24/25/30 AC3, MPEG1 (Layer

1, 2, 3), LPCM

Video Play Control Buttons

ENTER

E

Play/Pause the movie  le

∂

Play the movie  le

∑

Pause the movie  le

∫

Exit play mode and return to the movie list.

TOOLS Run various functions from the movie menus.

◄/►/Wheel Skip forwards or backwards through the movie  le in 20 second intervals.

▲/▼/Wheel Play the next  le or the previous  le.

Movie function information icon

When all movie  les in the folder (or the selected  le) are repeated.

“Repeat Mode” is “On”.

When all movie  les in the folder (or the selected  le) are played once.

“Repeat Mode” is “Off”.

Playing the movie group

1. Press the ▲ or ▼ button to select a sorting standard. (“Title”, “Timeline”, “Folder”, “Preference”)

2. Press the π (REW) or µ (FF) button to select the desired group.

3. Press the TOOLS button.

4. Press the ▲ or ▼ button to select “Play Current Group”, then press the ENTER

E

button.

N

N

N

N

N

N

N

N

SUM

E

Pause

-20sec

+20sec

Option

Return



1/5 00:00:48 00:23:05

ABC.avi

BN68-01737C-Eng.indb 39 2008-08-12 �� 5:47:30

English - 40

Playingtheselectedmovieles

1. Press the ◄ or ► button to select the desired movie le in the movie list.

2. Press the yellow button. Repeat the above operation to select multiple movie les.

The cmark appears to the left of the selected movie le.

3. Press the ∂ (Play)/ENTER

E

button.

Only the selected le is played.

Playing movie continuously

If you exit playing movie, playing it continuously later is possible.

With “Play continuously” function, you can watch movie without watching again from beginning or bothering searching.

1. Select movie le you want to Play continuously by pressing ◄ or ► button from the Movie List.

2. Press the ∂ (Play)/ENTER

E

button.

3. Select play continuously by pressing Blue button.

Movie will begin to play from where it was stopped being played.

If “Cont. movie play help” function was set “On”, a pop-up message will appear when you play movie le you want to Play

continuously. (Refer to page 41)

4. To exit “WISELINK Pro” mode, press the W.LINK button on the remote control.

Movie Play Option Menu

Repeat Mode

You can play the movie repeatedly.

Picture Setting/Sound Setting

Refer to page 41.

Picture Size

Fit: Play video at the TV screen size.

Original: Play video at the original size.

Information

The movie le information is displayed.

Remove Safely

You can remove the device safely from the TV.

N

N

N

N







•

•





Deleting the Photo/Music/Movie File

1. Press the ◄ or ► button to select the desired le in the Photo/Music/Movie

list.

To delete multiple les, select les by pressing the yellow button.

2. Press the TOOLS button.

3. Press the ▲ or ▼ button to select “Delete” (or “Delete selected File”), then

press the ENTER

E

button.

4. Press the ◄ or ► button to select “OK”, then press the ENTER

E

button.

The le is deleted.

When a read-only le is deleted, the “This File is read-only le. Delete

it?” message appear.

Read-only les among multiple les cannot be deleted.

If you select “Cancel”, the deletion is cancelled.

While removing les, don’t remove the USB memory device.

You cannot remove the PTP-connected digital camera picture les.

You cannot recover deleted Photo/music/movie les.

N

N

N

N

N

N

N

N

Tools

Repeat Mode ◄ On ►

Picture Setting

Sound Setting

Picture Size : Fit

Information

Safe Remove

U

Move

L

Adjust

e

Exit

Photo

SUM



Device



Favourites Setting



Select

Jump

Option

image_1.jpg

Month : Jan

Date : Jan.01.2008

Color : Gray

Composition :

Folder : P-other

Favourites : ★ ★ ★

Preference

Monthly

Timeline

Jan Nov

▲

Slide Show

Play Current Group

Delete

Information

▼

BN68-01737C-Eng.indb 40 2008-08-12 �� 5:47:31

English - 41

Picture/Music Settings Using WISELINK Pro

While a slideshow, music or movie is being played, you can set the picture and sound.

Picture Setting

1. Press the TOOLS button while a slideshow, music or movie is being played.

2. Press the ▲ or ▼ button to select “Picture Setting”.

3. Press the ◄ or ► button to select the “Picture Mode” (“Dynamic”,

“Standard”, or “Movie”).

4. Press the ▲ or ▼ button to move to an item. (“Contrast”, “Brightness”,

“Color”, “Dynamic Contrast”, “Black Adjust”, or “Reset”)

Select “Reset” to initialize the picture settings.

5. Press the ◄ or ► button to adjust the settings.

For more information on the picture settings, refer to pages 14~17.

Sound Setting

1. Press the TOOLS button while a slideshow, music or movie is being played.

2. Press the ▲ or ▼ button to select “Sound Setting”.

3. Press the ◄ or ► button to select the “Sound Mode”. (“Standard”, “Music”,

“Movie”, “Speech”, or “Custom”)

4. Press the ▲ or ▼ button to move to an item.

Select “Reset” to initialize the sound settings.

5. Press the ◄ or ► button to adjust the settings.

For more information on the sound settings, refer to page 19.

Using the Setup Menu

Setup displays the user settings of the WISELINK Pro menu.

1. Press the W.LINK button on the remote control to display the WISELINK Pro

menu.

2. Press the ◄ or ► button to select “Setup”, then press the ENTER

E

button.

3. Press the ▲ or ▼ button to select the desired option.

4. Press the ◄ or ► button to select the option, then press the ENTER

E

button.

To exit WISELINK Pro mode, press the W.LINK button on the remote

control.

Slide Show Speed → Fast/Slow/Normal

Select to control the slide show speed.

Music Repeat Mode → On/Off

Select to repeatedly play music les.

Movie Repeat Mode → On/Off

Select to repeatedly play movie les.

Cont. movie play help → On/Off

Select to display the help pop-up message for continuous movie playback.

Screen Saver Run Time → 1 min/3 min/5 min

Select to set the waiting time before the screen saver appears.

Information

Select to viewing the information of the connected device.

Remove Safely

You can remove the device safely from the TV.

N

N

N

N

N















Setup

SUM



Device

Move Adjust

Return

Slide Show Speed ◄ Normal ►

Music Repeat Mode : On

Movie Repeat Mode : On

Cont. movie play help : On

Screen Saver Run Time : 3 min

Information

Remove Safely

WISELINK Pro

Photo

SUM



Device

e

Exit

Music Setup

SETUP

SUM

851.98MB/995.00MB Free

Movie

Picture Setting

Picture Mode ◄ Standard ►

Contrast : 95

Brightness : 40

Color : 50

Dynamic Contrast : Low

Black Adjust : Low

Reset

U

Move

L

Adjust

E

Enter

R

Return

Sound Setting

Sound Mode ◄ Custom ►

Balance : L50 R50

100Hz : 0

300Hz : 0

1KHz : 0

3KHz : 0

10KHz : 0

Reset

U

Move

L

Adjust

E

Enter

R

Return

BN68-01737C-Eng.indb 41 2008-08-12 �� 5:47:31

English - 42

WISELINK Pro-DLNA

Setting the DLNA Network

DLNA allows you to watch videos and pictures saved on your PC on your TV through a network connection in Wiselink Pro mode.

This removes the need to copy them to a USB storage device and then connect the device to your TV. To use DLNA, the TV must

be connected to the network and the DLNA application must be installed on your PC.

Network Connections Diagram

1. Connect the [LAN] port on the rear panel of the TV to the external modem with a LAN Cable.

2. Connect the PC to which the “DLNA PC Share Manager” programme will be installed and the external modem using a LAN

cable.

3. Connect the LAN port on the wall and the external modem with a Modem Cable.

You can connect the TV to the PC directly without connecting it through a Sharer(Router).

Connecting to the Network

1. When connecting to the network is complete, set up the network on the TV.

The rst 3 parts of the subnet address of the TV and the PC IP addresses should be the same and only the last part (the

host address) should be changed. (e.g. IP Address: 123.456.789.**)

2. Run a “Network Test” to check the network settings.

Installing the DLNA Application

To play content on the PC on the TV, you have to rst install the application.

System Requirements

1. Insert the Programme CD supplied with this TV into your PC.

2. 20MB of free hard disk space is needed for the programme installation.

If you share les, up to 20MB of hard disk drive space is required for each 100 les.

If you cancel le sharing, the hard disk drive space used for the thumbnail information is also freed.

Supported Formats

1. Image: JPEG (jpg, jpeg)

2. Audio: MP3 (mp3)

3. Video: MPEG1(mpg, mpeg), MPEG2 PS/TS(mpg, mpeg, trp, ts, tp), divx(mpg, mpeg, avi), MPEG4/H.264 (mpg, mpeg)

N

N



N

N



TV

External Modem

(ADSL/VDSL/Cable TV)

LAN

PC

LAN

1

2

3

BN68-01737C-Eng.indb 42 2008-08-12 �� 5:47:31

English - 43

Install the application

1. Run the Setup.exe le on the Programme CD supplied with the product.

Alternatively, you can download the le from www.samsung.com.

2. Install the SAMSUNG PC Share Manager as shown in the gures below.

► ►

► ►

►

3. When the installation is complete, the PC Share Manager icon appears on your Desktop.

Double-click the icon to run the programme.



N

N

BN68-01737C-Eng.indb 43 2008-08-12 �� 5:47:32

English - 44

Using the DLNA Application

The Programme Screen Layout

1. Menus: The following application menus are provided : “File”, “Share”, “Server”, and “Help”.

2. Click to share the selected PC server folder.

3. Click to cancel sharing.

4. Click to refresh the PC folder and les.

5. Click to synchronize the share status.

6. The folders and les of the PC to be shared are listed.

7. Folders shared by the user are listed.

File

Property: Shows information on the selected file or folder.

Method 1: Select a le or folder and select the “File” menu and then select the “Property” sub-menu.

Method 2: Select a le or folder, right-click over the selected le or folder and then select “Property” from the pop-up menu.

<Method 1> <Method 2>

Name Modied

Name

Name

Exit: Exits the DLNA application.

If you select “Exit” without applying the changes after changing the shared status, a message will appear asking if you want to

apply the changed settings to the PC. Select “Yes” to apply the changes and exit the application.

Name

Yes No

❑



-

-



1

2 3 4 5

67

BN68-01737C-Eng.indb 44 2008-08-12 �� 5:47:32

English - 45

Share

Sharing a Folder

You can share a folder from your PC to the TV. The maximum number of folders that can be shared is 32.

Your PC will operate as a server to the TV.

Method 1: Select a folder in “My Computer”, select the “Share” menu and then select the “Share Folder” sub-menu.

Method 2: Select a folder in “My Computer”, right-click over the selected folder and then select “Share Folder” from the pop-

up menu.

Method 3: Locate the mouse pointer over a folder in the “My Computer” folder list in the left pane and drag&drop the folder

into the Shared Folders pane. If a message appears asking you to conrm the shared folder, select “Yes”.

<Method 1> <Method 2> <Method 3>

Name Modied

Name Modied

Name Modied

Yes No

Cancelling a Shared Folder

You can cancel a shared folder on your PC. Select a folder from the “Shared Folder” pane and select “Unshare Folder”.

Method 1: Select a folder from the “Shared Folder” pane, select the “Share” menu and then select “Unshare Folder”.

Method 2: Select a folder from the “Shared Folder” pane, right-click over the selected folder and then select “Unshare

Folder” from the pop-up menu.

Method 3: Locate the mouse pointer over a folder in the “Shared Folder” pane and drag&drop the folder into the “My

Computer” pane. If a message appears asking you to conrm the cancelation, select “Yes”.

<Method 1> <Method 2> <Method 3>

Name Modied

Name Modied

Name Modied

Yes No

Applying the Current Settings

Perform this when synchronization is necessary due to a new shared folder or canceling a shared folder. The “Set Changed

State” menu applies changes to shared folders to the data saved with the PC share programme.

Since applying changes to the internal data is a time-consuming process, this function enables users to apply changes to the

data only when required.

Until the “Set Changed State” menu is selected, the changed state of the shared folder is not applied to the server.

Changes to the shared folders are not applied to your PC until you select the “Set Changed State” menu.

Method 1: Select the “Share” menu and select the “Refresh DB” sub-menu.

Method 2: Click the “Set Changed State” icon.

<Method 1> <Method 2>

Name Modied

Name

❑



N

-

-

-



-

-

-



-

-

BN68-01737C-Eng.indb 45 2008-08-12 �� 5:47:33

English - 46

Setting the Access Permission

To enable the TV to nd your PC, the TV must be set to “Set Device Policy” in the Access Permission Settings window. In

addition, the PC server and the TV must be on the same subnet.

Method: Select the “Share” menu and select “Set Device Policy”. Rejected items are represented in gray. You can change

the access permissions by using the Allow “Accept” / “Deny” button. To delete an item, select the item and select “Delete

Item”.

Server

Server

You can run or stop using your PC as a server.

Run DLNA Digital Media Server when Windows Starts

You can determine whether to start the PC server automatically when Windows starts.

Change server name

You can rename the PC server. Enter a new name and click “OK”. The new name will appear at the top right of the window

and will appear on the TV.

Name Modied

Name Modied Name

Help

Version

The programme version information message box appears.

Name Modied



-

❑







❑



BN68-01737C-Eng.indb 46 2008-08-12 �� 5:47:33

English - 47

Using the DLNA Function

Using the DLNA Menu

DLNA (Digital Living Network Alliance) enables content saved on a DLNA server

(usually your PC) connected to your TV or over a network to be played.

Wiselink Pro enables playing content saved on a USB memory device connected

to the TV, while DLNA enables playing content saved on a DLNA server (your

PC) connected to your TV or over the network. The procedures to use the

content are the same as those for WISELINK Pro.

If you install the PC share manager programme supplied with the TV onto a PC,

you can have the PC perform the role of a DLNA server over the network.

1. Press the W.LINK button on the remote control to display the “DLNA” menu.

Press the SOURCE button on the remote control repeatedly to select

“DLNA”, then press the ENTER

E

button.

2. Press the ◄ or ►button to select an icon (Photo, Music, Movie, Setup), then

press the ENTER

E

button.

To exit “DLNA” mode, press the W.LINK button on the remote control.

Photo

Photo List option menu

Sorting Photo List/Viewing the Information/Rotating the Photo le/Viewing a Slide Show

During a Slide Show option menu

Play & Pause/Slide Show Speed/Zoom/Rotate

Music

Music List option menu

Sorting Music List/Viewing the Information/Playing a music le

Music Play Option Menu

Play & Pause/Repeat Mode

Movie

Movie List option menu

Sorting Movie List/Viewing the Information/Playing a Movie le

Movie Play Option Menu

Play & Pause/Repeat Mode

Setup

Slide Show Speed/Music Repeat Mode/Movie Repeat Mode/Screen Saver Run Time/Information

DLNA does not support the following functions.

The Background Music and Background Music Setting functions.

Sorting les by preference in the Photo, Music, and Movie folders.

The Change Group Info function.

The Delete function.

The Safe Remove function.

The π (REW)/µ (FF) button functions while a movie is playing.

Function to watch continuously when playing movie.

The Skip (◄/► button) or Pause function may not work while a movie is playing for the DLNA of other manufacturers,

depending on the corresponding content information.

The playing time may not be displayed while a movie is playing.

O

N

❑





❑





❑





❑

N

-

-

-

-

-

-

-

N

N

WISELINK Pro

Photo

SUM



Device

e

Exit

Music Setup

PHOTO

DLNA : Server

Movie

TV

SET RESET

VCR DVD STB

BN68-01737C-Eng.indb 47 2008-08-12 �� 5:47:33

English - 48

Activating the Content Library

The “Content Library” enables you to view or play the built-in contents on the TV

or stored on your USB device. The Delete, Move and Update functions will not

work with the built-in content on the TV.

1. Press the MENU button. Press the ▲ or ▼ button to select “Application”,

then press the ENTER

E

button.

2. Press the ▲ or ▼ button to select “Content Library”, then press the

ENTER

E

button.

The “Content Library” main menu is displayed.

Press the CONTENT button on the remote control to display the “Content

Library” main menu.

3. Press the ◄ or ► button to select an icon (Gallery, Cooking, Game,

Children, Fitness), then press the ENTER

E

button.

The selected item will be run.

Refer to the explanation for the button in the display when the user uses

the button while content is running.

Button Operations

Wheel (▲/▼/◄/►) Move the cursor and select an item.

ENTER

E

Select the currently selected item.

RETURN Return to the previous menu.

EXIT Stop the current function and return to the “Content Library” main menu.

P

>/<

, PRE-CH Stop Content Library mode and Returns to TV mode.

Colour button Button that provide functions are described on the corresponding page.

– = +You can control the volume of the played content.

CONTENT Exit Content Library mode.

If you press the Volume or MUTE button, no OSD is displayed, but the function operates accordingly.

Content Library contains text, graphics, images, multimedia, and other materials for informational and promotional purposes

only. Materials in Content Library has been modied and keeps being revised and updated. The Materials in the Content Library

may not be suitable for all audiences.

Information in the Content Library is provided “as is.” Although the information provided to you in the Content Library is obtained

or complied from sources we believe to be reliable, Samsung cannot and does not guarantee the accuracy, validity, timeliness

or completeness of any information or data made available to you for any particular purpose. Under no circumstances, including

negligence, shall Samsung be held liable, whether in contract or tort, for any direct, indirect, incidental, special or consequential

damages, attorney fees, expenses, or any other damages whatsoever arising out of, or in connection with, any information

contained in, or the use of, the Content Library, even if advised of the possibility of such damages.

N

O

N

N

N

Content Library

Application

WISELINK Pro

Anynet+ (HDMI-CEC)

ContentLibrary  ►

Product Guide



Setup



USB

R

Return

e

Exit

Game Children Fitness

Gallery

Gallery

Content Library

Cooking

TV

SET RESET

VCR DVD STB

BN68-01737C-Eng.indb 48 2008-08-12 �� 5:47:34

English - 49

Using the Content Library

Gallery

Art/Relaxation/Party:

This function plays a SlideShow with high resolution images and background music and produces

various atmospheres. Using the Gallery function of the TV, you can change your home atmosphere.

Press the yellow button to playback all imageries.

There is default music for each for the “Art”, “Relaxation”, and “Party” options.

Press INFO button to see the credit and detail information in English for the imagery. Press INFO button again or press ►

button for the credit information to go away (currently, the credit supports English only.)

The copyrights of the “Gallery” contents and all issues related to them are reserved by Gallery Player, Inc.

For additional “Gallery” contents, check for information through www.samsung.com. Please refer to the “Using Additional

Content Using External USB Memory Storage” section (page 50) to see how to play additional imagery.

Cooking

Starters/Main Courses/Desserts:

You can view various recipes that you can then easily follow step by step. Enjoy these

contents which give you great ideas for meals.

The recipes introduced in the “Cooking” contents on the Samsung TV are based on recipes published by Anness

Publishing.

The copyrights of the “Cooking” contents and all issues related to them are reserved by Practical Pictures.

Game

Dynamic Bowling/Minimini Cook:

This category provides entertainment games for the whole family.

For the buttons used in the games, refer to the directions on the screen.

For the 2 embedded games, the copyrights are reserved by each of the corresponding game providers and all issues

related to copyrights are reserved by the corresponding game providers.

More detail instruction on how to play a game is given at the beginning of each game page.

Children

Story/Song/Play:

This is educational and interactive content that children can watch repeatedly. Enjoy existing stories, songs

and games with the Boowa and Kwala characters.

The copyrights of the “Children” contents and issues related to them are reserved by UpToTen.

Fitness

Basic Stretches/Massage:

This is benecial health management content that provides stretching and massage exercises

that can be enjoyed by the whole family.

This is benecial health management content that provides stretching and massage exercises that can be enjoyed by the

whole family. The “Basic Stretches” contents for the Samsung TV are based on the book Stretching by Suzanne Martin

which is published by DK and the “Massage” contents are based on the books published by Anness Publishing.

The copyrights to “Basic Stretches” are reserved by the DK Publishing Company. The copyrights to the “Massage” content

are reserved by Practical Pictures. All issues related to copyrights are reserved by the corresponding company.

Using the Remote Control Button in Fitness menu

Button Operations

Wheel (◄/►) View to previous step/View to next step

ENTER

E

Play or pause (in Basic and Advanced Stretches)

ScreenSaverRunTime→Off/4hour/8hour/10hour

Select to set the waiting time before the screen saver appears.

Press the yellow button to select “Setup” in the “Content Library” main menu.

❑



N

N

N

N

N

❑



N

N

❑



N

N

N

❑



N

❑



N

N

❑

BN68-01737C-Eng.indb 49 2008-08-12 �� 5:47:34

English - 50

Using Additional Content Using External USB Memory Storage

You can download contents onto a USB memory device and play them on your TV. (The contents on the external USB device are

played directly without being copied to the built-in Flash memory of the TV.)

Playing and Exiting New Content

1. Press the Red button in the “Content Library” main menu.

The USB Browser main screen is displayed.

A list of  les saved on the USB device is displayed.

2. Press the ▲ or ▼ button to move to the  le (or folder) you want to play.

Press the ENTER

E

button.

The selected content is played.

Not support game program.

The use of contents is the same as in using the TV memory contents.

To return to the USB browser main screen, press the EXIT button.

To exit “Content Library” mode, press the P>/< button on the remote

control.

“Content Library” only supports USB Mass Storage Class devices

(MSC). MSC is a Mass Storage Class Bulk-Only Transport device.

Examples of MSC are Thumb drives and Flash Card Readers (Both

USB HDD and HUB are not supported.)

Downloading New Contents

New content other than the built-in contents will be provided via the Samsung.

com website with or without charge.

Downloading Content

1. Visit the www.samsung.com website and open the Content Library page.

2. Enter the product number (UDN, Unique Device Number) when it is asked.

3. Select a content item in the Contents Download page.

4. Download the contents onto the USB memory device.

“Content Library” only supports USB Mass Storage Class devices (MSC). MSC is a Mass Storage Class Bulk-Only

Transport device. Examples of MSC are Thumb drives and Flash Card Readers (Both USB HDD and HUB are not

supported.)

5. Go to “Content Library” main menu by pressing CONTENT button or choosing “Content Library”

6. Plug the USB memory into USB port on the side of the TV.

Finding a product number (Unique Device Number, UDN)

1. Insert the USB memory into the USB port on the side of the TV.

2. In the USB Browser main screen, press the Green button (Show UDN).

3. The 18-digit number on the screen is the product code.

Provided Content

Additional contents are available on www.samsung.com.

N

N

N

N

N

N

N

N



N







TV Memory



Show UDN

R

Return

Content Library

USB

<<

1/1

>>

Cooking

Gallery

Fitness

Children

Cooking

▼ ▲



Setup



USB

R

Return

e

Exit

Game Children Fitness

Gallery

Gallery

Content Library

Cooking

BN68-01737C-Eng.indb 50 2008-08-12 �� 5:47:34

English - 51

Connecting Anynet+ Devices

Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s

remote.

The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has

this feature, check if there is an Anynet+ logo on it.

To connect to a TV

1. Connect the [HDMI 1], [HDMI 2], [HDMI 3] or [HDMI 4] jack on the TV and the HDMI OUT jack of the corresponding Anynet+

device using an HDMI cable.

To connect to Home Theater

1. Connect the [HDMI 1], [HDMI 2], [HDMI 3] or [HDMI 4] jack on the TV and the HDMI OUT jack of the corresponding Anynet+

device using an HDMI cable.

2. Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI

cable.

Connect the Optical cable between the Digital Audio Out (Optical) jack on your TV and the Digital Audio Input on the Home

Theater.

When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the Home

Theater’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the Digital Audio

Out (Optical) jack on the DVD player or Cable/Satellite Box (ie Anynet Device 1 or 2) directly to the Ampli er or Home Theater,

not the TV.

Connect only one Home Theater.

You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet+ functions.

Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.

Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.

N

N

N

N

N

N

About Anynet+

TV

Anynet+ Device 1

HDMI 1.3

Cable

Anynet+ Device 2 Anynet+ Device 3 Anynet+ Device 4

HDMI 1.3

Cable HDMI 1.3

Cable HDMI 1.3

Cable

TV

Optical

Cable

Home Theater

HDMI 1.3

Cable

Anynet+ Device 1

HDMI 1.3 Cable

HDMI 1.3

Cable

Anynet+ Device 2 Anynet+ Device 3 Anynet+ Device 4

HDMI 1.3

Cable HDMI 1.3

Cable

BN68-01737C-Eng.indb 51 2008-08-12 �� 5:47:35

English - 52

Scanning and Switching between Anynet+ Devices

1. Press the TOOLS button. Press the ENTER

E

button to select “Anynet+

(HDMI-CEC)”.

2. Press the ▲ or ▼ button to select “Device List”, then press the ENTER

E

button

Anynet+ devices connected to the TV are listed. If you cannot nd a device

you want, press the red button to scan for devices.

Only when you set “Anynet+ (HDMI-CEC)” to On in the “Setup” menu, the

“Device List” menu appears.

3. Press the ▲ or ▼ button to select to a particular device and press the

ENTER

E

button. It is switched to the selected device.

Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.

The time required to scan for devices is determined by the number of connected devices.

When the device scan is complete, the number of devices found are not displayed.

Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to

the TV when the TV is on or under some conditions are not automatically displayed in the device list. Press the red button to

search for the connected device.

If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to

switch to an Anynet+ device by using the “Device List”.

N

N

N

N

N

N

N

Setting Up Anynet+

Anynet+(HDMI-CEC)

“Tools → Anynet+(HDMI-CEC)” performs the same function.

Setup

Anynet+(HDMI-CEC) → Off / On: To use the Anynet+ Function, Anynet+

(HDMI-CEC) must be set to On.

When the “Anynet+ (HDMI-CEC)” function is disabled, all the Anynet+

related operations are deactivated.

Auto Turn Off → No / Yes: Setting an Anynet+ Device to turn Off

Automatically when the TV is Turned Off

The active source on the TV remote must be set to TV to use the

Anynet+ function.

If you set “Auto Turn Off” to “Yes”, connected external devices are also

turned off when the TV is turned off. If an external device is still recording,

it may or may not turn off.

❑



•

N

•

N

N

Application

WISELINK Pro

Anynet+(HDMI-CEC) ►

Content Library

InfoLive

Product Guide

Device List

Setup

U

Move

E

Enter

R

Return

View TV

Device List

Recording : DVDR

DVDR Operation

Receiver : On

Setup

U

Move

E

Enter

R

Return

Anynet+ (HDMI-CEC) : ON

Auto Turn Off : Yes

U

Move

E

Enter

R

Return

Set up

Off

On

BN68-01737C-Eng.indb 52 2008-08-12 �� 5:47:35

English - 53

Anynet+ Menu

The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.

Anynet+ Menu Description

View TV Anynet+ mode changes to TV broadcast mode.

Device List Shows the Anynet+ device list.

(device_name) Menu Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of

the DVD recorder will appear.

(device_name) Operation Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the play

menu of the DVD recorder will appear.

Record: (*recorder) Starts recording immediately using the recorder. (This is only available for devices that

support the recording function.)

Stop Recording: (*recorder) Stops recording.

Receiver Sound is played through the receiver.

If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is

connected, it will be represented as (*device_name).

TV Remote Control Buttons Available in Anynet+ Mode

Device Type Operating Status Available Buttons

Anynet+ Device

After switching to the device, when

the menu of the corresponding

device is displayed on the screen.

Numeric buttons

▲/▼/◄/►/wheel/ENTER

E

buttons

Colour buttons / EXIT button

After switching to the device, while

playing a le

π

(Backward search) /

µ

(Forward search)

∫

(Stop) /

∂

(Play) /

∑

(Pause)

Device with built-

in Tuner

After switching to the device, when

you are watching a TV programme P

>

/ P

<

button

Audio Device When Receiver is activated Volume / MUTE button

The Anynet+ function only works when the active source on the TV remote control is set to TV.

The

∏

button works only while in the recordable state.

You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote

control.

The TV remote control may not work under certain conditions. In this case, reselect the Anynet+ device.

The Anynet+ functions do not operate with other manufacturers’ products.

The

π

,

µ

operations may differ depending on the device.

Recording

You can make a recording of a TV programme using a Samsung recorder.

1. Press the TOOLS button. Press the ENTER

E

button to select “Anynet+

(HDMI-CEC)”.

2. Press the ▲ or ▼ button to select “Recording: (device_name)”, then press the

ENTER

E

button. Recording begins.

When there is more than one recording device

When multiple recording devices are connected, the recording devices are

listed. Press the ▲ or ▼ button to select a recording device and press the

ENTER

E

button. Recording begins.

When the recording device is not displayed

Select “Device List” and press the red button to search devices.

3. Press the EXIT button to exit.

You can record the source streams by selecting “Recording: (device_name)”.

Pressing the

∏

button will record whatever you are currently watching. If you are watching video from another device, the

video from the device is recorded.

Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an

antenna to a recording device, refer to the recording device’s users manual.

N

N

N

N

N

N

N

N

N

N

N

N

View TV

Device List

Recording : DVDR

DVDR Operation

Receiver : On

Setup

U

Move

E

Enter

R

Return

BN68-01737C-Eng.indb 53 2008-08-12 �� 5:47:35

English - 54

Listening through a Receiver (Home theater)

You can listen to sound through a receiver instead of the TV speaker.

1. Press the TOOLS button. Press the ENTER

E

button to select “Anynet+

(HDMI-CEC)”.

2. Press the ▲ or ▼ button to select “Receiver”. Press the ◄ or ► button to select

“On” or “Off”.

3. Press the EXIT button to exit.

If your receiver supports audio only, it may not appear in the device list.

The receiver will work when you have properly connected the Optical IN jack of

the receiver to the Optical Out jack of the TV.

When the receiver (home theater) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is

displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital

component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater

receiver.

When using the WISELINK Pro feature, sound may not output properly through the receiver.

When listening through the receiver, there are restrictions for using the PIP and audio-related menus.

If there is a power interruption to the TV when the “Receiver” is set to “On” (by disconnecting the power cord or a power

failure), the “Select Speaker” may be set to “External Speaker” when you turn the TV on again. (see page 20)

Troubleshooting for Anynet+

Symptom Solution

Anynet+ does not work. Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.

Connect only one receiver (home theater).

Check if the Anynet+ device power cord is properly connected.

Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections.

Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.

Check whether the TV remote control is in TV mode.

Check whether it is Anynet+ exclusive remote control.

Anynet+ doesn’t work in certain situations. (Searching channels, Operating WISELINK Pro, Plug

& Play, etc.)

When connecting or removing the HDMI 1.3 cable, please make sure to search devices again or

turn your TV off and on again.

Check if the Anynet+ Function of Anynet+ device is set on.

•

•

•

•

•

•

•

•

•

•

I want to start Anynet+.Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-

CEC) is set to On in the Anynet+ Setup menu.

Press the TV button on the TV remote control to switch to TV. Then press the TOOLS button to

show the Anynet+ menu and select a menu you want.

•

•

I want to exit Anynet+.Select View TV in the Anynet+ menu.

Press the SOURCE button on the TV remote control and select a device other than Anynet+

devices.

Press P

>

/

<

and PRE-CH to change the TV mode. (Note that the channel button operates

only when a tuner-embedded Anynet+ device is not connected.)

•

•

•

The message Connecting

to Anynet+ device...

appears on the screen.

You cannot use the remote control when you are conguring Anynet+ or switching to a view

mode.

Use the remote control when the Anynet+ setting or switching to view mode is complete.

•

•

The Anynet+ device does

not play. You cannot use the play function when Plug & Play is in progress.

The connected device is

not displayed. Check whether or not the device supports Anynet+ functions.

Check whether or not the HDMI 1.3 cable is properly connected.

Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.

Search Anynet+ devices again.

You can connect an Anynet+ device using the HDMI 1.3 cable only. Some HDMI cables may not

support Anynet+ functions.

If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord

or a power failure, please repeat the device scan.

•

•

•

•

•

•

The TV programme cannot

be recorded. Check whether the antenna jack on the recording device is properly connected.

The TV sound is not output

through the receiver. Connect the optical cable between TV and the receiver.

N

N

N

N

N

N

View TV

Device List

Recording : DVDR

DVDR Operation

Receiver ◄ On ►

Setup

U

Move

L

Adjust

R

Return

BN68-01737C-Eng.indb 54 2008-08-12 �� 5:47:35

English - 55

Recommendations for Use

Teletext Feature

Most television stations provide written information services via Teletext. The index page of the teletext service gives you

information on how to use the service. In addition, you can select various options to suit your requirements by using the remote

control buttons.

For teletext information to be displayed correctly, channel reception must be stable. Otherwise, information may be missing or

some pages may not be displayed.

1

: (exit)

Exit from the teletext display.

2

6 (index)

Used to display the index (contents) page at any time while you are viewing

teletext.

3

8 (store)

Used to store the teletext pages.

4

4 (size)

Press to display the double-size letters in the upper half of the screen. For lower

half of the screen, press it again. To display normal screen, press it once again.

5

5 (reveal)

Used to display the hidden text (answers to quiz games, for example). To display

normal screen, press it again.

6

/ (teletext on/mix)

Press to activate teletext mode after selecting the channel providing the teletext

service. Press it twice to overlap the teletext with the current broadcasting screen.

7

1 (sub-page)

Used to display the available sub-page.

8

2 (page up)

Used to display the next teletext page.

9

3 (page down)

Used to display the previous teletext page.

0

0 (mode)

Press to select the teletext mode (LIST/FLOF). If you press it in the LIST mode,

it switches into the List save mode. In the List save mode, you can save teletext

page into list using the 8(store) button.

!

9 (hold)

Used to hold the display on a given page if the selected page is linked with several

secondary pages which follow on automatically. To resume, press it again.

@

7 (cancel)

Used to display the broadcast when searching for a page.

#

Colour buttons (red/green/yellow/blue)

If the FASTEXT system is used by a broadcasting company, the different topics

covered on a teletext page are colour-coded and can be selected by pressing the

coloured buttons. Press one of them corresponding to the required. The page is

displayed with other coloured information that can be selected in the same way. To

display the previous or next page, press the corresponding coloured button.

You can change teletext pages by pressing the numeric buttons on the remote

control.

N

N

TV

SET RESET

VCR DVD STB

1

3

4

5

6

2

7

8

9

0

!

@

#

TV

SET RESET

VCR DVD STB

BN68-01737C-Eng.indb 55 2008-08-12 �� 5:47:36

English - 56

The teletext pages are organized according to six categories:

Part Contents

ASelected page number.

BBroadcasting channel identity.

CCurrent page number or search indications.

DDate and time.

EText.

FStatus information.

FASTEXT information.

Teletext information is often divided between several pages displayed in sequence,

which can be accessed by:

Entering the page number

Selecting a title in a list

Selecting a coloured heading (FASTEXT system)

Press the TV button to exit from the teletext display.

Setting Up Your Remote Control

After the television has been set up properly, your remote control can operate in different modes: TV, VCR, DVD, Set-Top Box,

Cable Box. Pressing the corresponding button on the remote control allows you to switch between these modes and control

whichever piece of equipment you choose.

The remote control might not be compatible with all DVD Players, VCRs, Set-Top Boxes and Cable Box.

Setting Up the Remote to Operate Your VCR, DVD, STB and Cable Box

1. Turn off your VCR, DVD, STB and Cable Box.

2. Press the MODE button and make sure that the VCR, DVD and STB LED is

illuminated.

3. Press the SET button on your TV’s remote control.

4. Using the number buttons on your remote control, enter three digits of the VCR,

DVD, STB or Cable Box code listed on pages 57~58 of this manual for your

brand of VCR, DVD, STB or Cable Box. Make sure you enter three digits of the

code, even if the rst digit is a “0”. (If more than one code is listed, try the rst

one.)

5. Press the POWER button on the remote control. Your VCR, DVD, STB or Cable

Box should turn on if your remote is set up correctly. If your VCR, DVD, STB

or Cable Box does not turn on after set up, repeat steps 2, 3 and 4, but try

one of the other codes listed for your brand of VCR, DVD, STB or Cable Box.

If no other codes are listed, try each VCR, DVD, STB or Cable Box code, 000

through 080.

When your remote control is in VCR, DVD or STB mode, the volume

buttons still control your TV’s volume

N

-

-

-

O

N

N

TV

SET RESET

VCR DVD STB

TV

SET RESET

VCR DVD STB

TV

SET RESET

VCR DVD STB

BN68-01737C-Eng.indb 56 2008-08-12 �� 5:47:36

English - 57

Remote Control Codes

VCR

Brand Code

SAMSUNG 000 001 002 003 004 005 077 078 079

ADMIRAL 020

AIWA 025

AKAI 004 027 032

AUDIO DYNAMICS 007 026

BELL&HOWELL 018

BROKSONIC 022

CANDLE 002 003 006 008 015 055

CANON 021 056

CITIZEN 002 003 006 008 015 055

COLORTYME 007

CRAIG 002 024

CURTIS MATHES 002 007 008 017 021 025 056 064 066

DAEWOO 003 010 011 012 013 014 015 016

DB 007 026

DIMENSIA 017

DYNATECH 025

ELECTROHOME 034

EMERSON

001 003 006 021 022 025 030 032 034 040 047 050

052 060 063 065 066 067 069 073

FISHER 018 024 028 029 048 051 061

FUNAI 025

GENERAL ELECTRIC

002 005 017 021 056

GO VIDEO 002

HARMAN KARDON 007

HITACHI 019 025 041 042 074

INSTANT REPLAY 021

JC PENNEY

002 007 018 019 021 026 037 041 054 056

JCL

007 008 018 021 026 037

JVC

081 082 083

KENWOOD

007 008 018 026 037

KLH

070

KONIA

036

LG(Goldstar)

006 007 008 009 010

LIOYD

025

LOGIK

038

LXI

025

MAGNAVOX

021 056 059

MARANTZ

007 008 018 021 026 037 062

MARTA

006

MEI

021

MEMOREX

006 021 024 025

MGA

034

MIDLAND

005

MINOLTA

019 041 075

MITSUBISHI

019 034 041 046



Brand Code

MONTGOMERY WARD

020

MTC 002 025

MULTITECH 002 005 025 038

NEC 007 008 018 026 037 062 064

OPTIMUS 020

ORION 073 074 075 076

PANASONIC 021 056 071 072

PENTAX 019 041 075

PENTEX RESEARCH+

008

PHILCO 021 056 059

PHILIPS 021 080

PIONEER 019 026 039 053

PORTLAND 015 049 055

PROSCAN 017

QUARTZ 018

QUASAR 021 056

RADIO SHACK/

REALISTIC

006 018 020 021 024 025 029 034 048 056

RCA

002 017 019 021 035 041 043 057 068 076

SANSUI 026

SANYO 018 024

SCOTT 003 047 052 067

SEARS 006 018 019 024 028 029 041 048 051

SHARP 020 034 045 015

SHIMTOM 027 033 038 058

SIGNATURE 025

SONY 027 033 044

SYLVANIA 021 025 056 059

SYMPHONIC 025

TANDY 018 025

TASHIKA 006

TATUNG 037

TEAC 025 037 068

TECHNICS 021

TEKNIKA 006 021 025 031

TMK 066

TOSHIBA 003 019 029 051 052

TOTEVISION 002 006

UNITECH 002

VECTOR RESEARCH

007 026

VICTOR 026

VIDEO CONCEPTS 007 026

VIDEOSONIC 002

WARDS 002 003 006 019 020 021 024 025 034 038 041

YAMAHA 007 008 018 026 037

ZENITH 023 027 033

SAMSUNG DVD

Product Code

DVD 000 001 002 022

DVDR 003 004

BD Record 005 006

VCR COMBO 007 008 009 010 011

VCR Record 012

DHR COMBO 013



Product Code

Home Theater VCR

COMBO 014 015 016

HDD Recorder COMBO 017

TWIN TRAY COMBO 018

STB DVD COMBO 019

DVD Receiver 020

AV Receiver 021

SAMSUNG SET-TOP BOX

Product Code

Ground wave STB 000 001 002 008 013

CABLE STB 000 004 008 009 010 011 012 013 014 075 076

077 078 079 080 081 082

Satellite STB 000 003 008 013



BN68-01737C-Eng.indb 57 2008-08-12 �� 5:47:36

English - 58

DVD

Product Code

ANAM 030

AUDIOVOX 075

AUDIOLOGIC 085

ANABA 072

APEX DIGITAL 070 071 074 086 083 084 088 111 112

AIWA 114

BROKSONIC 062

BLAUPUNKT 074

B&K 122 123

CURTIS MATHES 027

CYBER HOME 077 078 079 082

CLARION 080 125

CIRRUS 081

CYBER HOME 065

CINEVISION 095

DAEWOO 066

DENON 146

FARENHEIT 067 068

FISHER 090

GPX 060

GO VIDEO 061 089 133 135

GE 069 074

GREENHILL 074

HITACHI 064 113

HITEKER 071

HOYO 073

HARMAN / KARDON

091 110

IRT 089

INTEGRA 092

JBL 091

JVC 022 033 115 116

JATON 073

KENWOOD 051 108 109

KISS 073

KONKA 059 100 106 107

KLH 074 075

LG(Goldstar) 025 031

LOEWE 057

LASONIC 058

MOBILE AUTHORITY

054

MEMOREX 055

MALATA 056

MAGNAVOX 076 093

MINTEK 074 094



Product Code

MONYKA 073

NORCENT 048 049 050

NEXT BASE 052

NEC 053

NANTAUS 144

NESA 074

OPTOMEDIA ELECTRONICS

105

OPTIVIEW 072

ONKYO 076 092 119

PHILCO 044 045

PRINCETON 046 047

PROSCAN 023

PANASONIC 024 034 124 134 136 137 138

PHILIPS 036 076

PIONEER 037 143

ROTEL 117 118

RIO 120

RCA 023 035 074 075 131 132

RAITE 073

ROWA 038

SAMPO 104

SONY 026 029 126 127 128 129 130 141

SHERWOOD 039 041

SVA 042

SYLVANIA 043 093

SHARP 140

SANSUI 062

SANYO 062 090

PANASONIC 024 034 124 134 136 137 138

PHILIPS 036 076

PIONEER 037 143

ROTEL 117 118

RIO 120

RCA 023 035 074 075 131 132

RAITE 073

ROWA 038

SAMPO 104

SONY 026 029 126 127 128 129 130 141

SHERWOOD 039 041

SVA 042

SYLVANIA 043 093

SHARP 140

SANSUI 062

SANYO 062 090

SET-TOP BOX, CABLE BOX

Product Code

ALPHASTAR 023

ANAM 043

CHANNEL MASTER 018 034

CROSSDIGITAL 019

CHAPARRAL 035

DIRECT TV 015 016 017 019 022 045 060 061 062 065 066

067 068

DAEWOO 074

DISH NETWORK SYSTEM

069 070

DISHPRO 069

DRAKE 018 024 032

DX ANTENNA 027

ECHOSTAR 025 069 070 071

EXPRESSVU 069

GE 065

GENERAL INSTRUMENT

046 047 048 063 064

GI 116

GOI 069

HAMLIN 078 099 106

HTS 069

HOME CABLE 056

HITACHI 022 100 105

HUGHES NETWORK

015 017

IQ 020

IQ PRISM 020

JANEIL 059

JERROLD 063 113 114

JVC 069 070

LG(Goldstar) 044 073

MAGNAVOX 016 021 036 038 039 040 041 042 084 098 103

MEMOREX 016

MOTOROLA 064

MACOM 018 100 105

MITSUBISHI 015

NEXT LEVEL 047 048 064

OAK 101



Product Code

PHILIPS 015 016 017 021 033 036 038 039 040 041 042

067 094 096 098 103

PIONEER 093 095 079 119

PRIMESTAR 046 049 050 063

PANASONIC 058 059 061 062 078 097 102 112 119

PAYSAT 016

PROSCAN 065 066

RCA 051 052 053 065 066 089 097 115

RADIOSHACK 064

REALISTIC 057

REGAL 078

REGENCY 090 098

SA 117 118

SAMSUNG 000 001 002 003 004 008 009 010 011 012 013

014 075 080 078 079 081 082 076 077

SCIENTIFIC ATLANTA

117 118

STAR TRAK 026

STS 020 027

SKY 031

SKY LIFE 005 006 007

SHACK 064

STAR CHOICE 064

SONY 054 060

SPRUCER 097

STARGATE 2000 111

SYLVANIA 091

TEXSCAN 091

TOCOM 107

TOSHIBA 015 017 028 029 030 072

ULTIMATE TV 060 066

UNIDEN 016 021 037 055 056 057

UNIVERSAL 108 109

VIEWSTAR 094 096 098 103

WAMER AMEX 121

ZENITH 024 031 068 092 104 110 112 120

BN68-01737C-Eng.indb 58 2008-08-12 �� 5:47:36

English - 59

Auto Wall-Mount Adjustment (Sold separately) (depending on the model)

Once the auto wall mount is installed, your TV’s position can be easily adjusted.

Entering the menu

1. Press the ▲, ▼, ◄ or ► button on your remote control.

The Wall Mount Adjustment screen is displayed.

If the Auto Wall-Mount screen is not displayed when clicking on a direction

button while watching your TV, use the menu to display that screen.

Press the MENU button to display the menu. Press the ▲ or ▼ button to

select “Setup”, then press the ENTER

E

button.

Press the ▲ or ▼ button to select “Wall-Mount Adjustment”, then press

the ENTER

E

button.

Remembering the Position

2. Adjust to the desired position using the ▲,▼,◄,► buttons.

If you press an arrow button when no OSD is displayed on the TV screen,

the Adjustment screen appears.

Press the INFO button to reset. Press the ◄ or ► button to select “Yes”,

then press the ENTER

E

button. The position is initialized to the default

setting.

3. Press the blue button. Press the ▲ and ▼ buttons to select a save mode from

either Position 1, Position 2 or Position 3 in order to save the current position.

To not save the current position, press the RETURN button.

When selecting a save mode, you cannot use the Colour buttons.

4. Press the ENTER

E

button to save.

When Position1 is selected, the message “Current position saved as Position1” is displayed.

5. Press the ENTER

E

button.

The saved Position appears on the left side of the OSD.

Moving to the remembered position

1. Complete Step 1 of “Entering the menu”.

2. Pressing a Colour (Red, Green, Yellow) button moves the auto wall mount to

the saved position.

You can move the wall mount to one of the 3 pre-set positions by pressing

the Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons.

If you adjust the Position after moving to a pre-set position, the position

display will disappear.

For installation, refer to the Installation Manual provided with the wall mount.

For product installation and the installation and moving of the wall mount, make sure to consult a specialized installation

company.

This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building materials,

please contact your nearest dealer.

The auto wall mount will not work when Anynet+ or WISELINK Pro is operating.

37, 40 and 46 models are not compatible with the older wall mount model (WMN5090A).

N

N

-

-

N

N

N

O

N

N

N

N

N

N

N

N

N

Wall-Mount Adjustment

Position 1 2 3

Adjust Save Centre

Save

Select a mode to save.

Move Enter Return

Position1

Position2

Position3

Setup

Preference

Digital Text : Enable

Wall-Mount Adjustment ►

Melody : Off

Entertainment : Off

Energy Saving : Off

PIP

Software Upgrade

Common Interface

TV Rear Panel Auto Wall-Mount

SERVICE Cable (Not supplied)

BN68-01737C-Eng.indb 59 2008-08-12 �� 5:47:37

English - 60

Wall Wall

Using the Anti-Theft Kensington Lock (depending on the model)

The Kensington Lock is a device used to physically x the system when using it in

a public place. The appearance and locking method may differ from the illustration

depending on the manufacturer. Refer to the manual provided with the Kensington

Lock for proper use. The locking device has to be purchased separately.

1.

Insert the locking device into the Kensington slot on the LCD TV (Figure 1)

and turn it in the locking direction (Figure 2).

2. Connect the Kensington Lock cable.

3. Fix the Kensington Lock to a desk or a heavy stationary object.

The location of the Kensington Lock may be different depending on its model.

N

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not

hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow

all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety

purposes, as follows.

To avoid the TV from falling:

1.

Put the screws into the clamps and rmly fasten them onto the wall. Conrm that the screws have been rmly installed

onto the wall.

You may need additional material such as an anchor depending on the type of wall.

Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.

2.

Remove the screws from the center back of the TV, put the screws into the clamps, and then fasten the screws onto the

TV again.

Screws may not be supplied with the product. In this case, please purchase the screws of the following specications.

Screw Specications

For a 17 ~ 29 Inch LCD TV: M4 X 15 / For a 32 ~ 40 Inch LCD TV: M6 X 15

3.

Connect the clamps xed onto the TV and the clamps xed onto the wall with a strong string and then tie the string tightly.

Install the TV near to the wall so that it does not fall backwards.

It is safe to connect the string so that the clamps xed on the wall are equal to or lower than the clamps xed on the TV.

Untie the string before moving the TV.

4.

Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have

any doubt about the security of your connections, contact a professional installer.

N

N

N

N

-

N

N

N

<Optional>

Figure 2

Figure 1

Cable

BN68-01737C-Eng.indb 60 2008-08-12 �� 5:47:38

English - 61

Troubleshooting: Before Contacting Service Personnel

No sound or picture Check that the mains lead has been connected to a wall socket.

Check that you have pressed the button on your set.

Check the picture contrast and brightness settings.

Check the volume.

•

•

•

•

Normal picture but no sound Check the volume.

Check whether the MUTEM button has been pressed on the remote control.

Check the “Select Speaker” settings.

•

•

•

Screen is black and power

indicator light blinks steadily On your computer check; Power, Signal Cable.

The TV is using its power management system.

Move the computer’s mouse or press any key on the keyboard.

•

•

•

No picture or black and white

picture Adjust the colour settings.

Check that the broadcast system selected is correct.

•

•

Sound and picture interference Try to identify the electrical appliance that is affecting the set and move it further away.

Plug your set into a different mains socket.

•

•

Blurred or snowy picture,

distorted sound Check the direction, location and connections of your aerial.

This interference is often due to the use of an indoor aerial.

•

•

Remote control malfunctions Replace the remote control batteries.

Clean the upper edge of the remote control (transmission window).

Check the battery terminals.

•

•

•

‘Check signal cable.’ message is

displayed Check that the signal cable is rmly connected to the PC or video sources.

Check that the PC or video sources are turned on.

•

•

On PC mode, ‘Not Supported

Mode.’ message is displayed Check the maximum resolution and the frequency of the video adaptor.

Compare these values with the data in the Display Modes.

•

•

The damaged picture appears in

the corner of the screen If “Just Scan” is selected in some external devices, the damaged picture may appear in the

corner of the screen. This symptom is caused by external devices, not TV.

The ‘Resets all settings to

the default values.’ message

appears.

This appears when you press and hold the EXIT button for a while. The product settings are

reset to the factory defaults.

You may see small particles if

you look closely at the edge of

the bezel surrounding the TV

screen.

This is part of the product’s design and is not a defect.

The TFT LCD panel uses a panel consisting of sub pixels (6 220 800) which require sophisticated technology to produce.

However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the

product.

BN68-01737C-Eng.indb 61 2008-08-12 �� 5:47:38

English - 62

Specications

Model Name LE46A956 LE55A956

Screen Size

(Diagonal)

46 inches 55 inches

PC Resolution

(Optimum)

1920 x 1080 @ 60 Hz 1920 x 1080 @ 60 Hz

Sound

Output

10W x 2 15W x 2

Dimensions (WxDxH)

Body

With stand 1 160 X 108 X 669 mm

1 160 X 300 X 759 mm

1 364 X 113 X 821 mm

1 364 X 338 X 883 mm

Weight

With Stand

31 kg 41 kg

Environmental

Considerations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

50°F to 104°F (10°C to 40°C)

p10% to 80%, non-condensing

-4°F to 113°F (-20°C to 45°C)

5% to 95%, non-condensing

Stand Swivel

(Left / Right) 0°

Design and specications are subject to change without prior notice.

This device is a Class B digital apparatus.

For the power supply and Power Consumption, refer to the label attached to the product.

N

N

N

3_BN68-01737C-Eng.indd 62 2008-08-13 �� 7:29:53