Samsung Delve Sch R800 Users Manual

Samsung-Delve-Alltel-Users-Manual-794920 samsung-delve-alltel-users-manual-794920

Samsung-Delve-Manual samsung-delve-manual samsung-delve-manual manuals phones s.theinformr.com 3:

SCH-R800 to the manual 5bbbd40c-c6d6-4ee1-81e2-6012af045e4b

Delve (Alltel) - User Manual alltel_r800_delve_ug Free User Guide for Samsung Mobile Phone, Manual - page1

2015-01-23

: Samsung Samsung-Delve-Sch-R800-Users-Manual-276020 samsung-delve-sch-r800-users-manual-276020 samsung pdf

Open the PDF directly: View PDF PDF.
Page Count: 180

DownloadSamsung Samsung-Delve-Sch-R800-Users-Manual- R800  Samsung-delve-sch-r800-users-manual
Open PDF In BrowserView PDF
Samsung Delve™
( S C H - R 8 0 0
P O R T A B L E
M O B I L E

S e r i e s )

D U A L - B A N D
P H O N E

User Manual
Please read this manual before operating your
phone, and keep it for future reference.

Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to
the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to
Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited
to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation
and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or
otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All
applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.

Samsung Telecommunications America (STA), LLC
Headquarters:
1301 E. Lookout Drive
Richardson, TX 75082
Toll Free Tel:

Customer Care Center:
1000 Klein St.
Plano, TX 75074
1.888.987.HELP (4357)

Internet Address: http://www.samsungusa.com

©2008 Samsung Telecommunications America, LLC is a registered trademark of Samsung Electronics America, Inc. and its related
entities.
Do you have questions about your Samsung Mobile Phone?
For 24 hour information and assistance, we offer a new FAQ/ARS System (Automated Response System) at:
www.samsungwireless.com/support

GH68-20750A
R800.01_BJ14_CB_102008_F6

Printed in Korea.
Licensed by Qualcomm Incorporated under one or more of the following patents:
U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390.
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and
other patents pending.
Nuance®, VSuite™ and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc. or its affiliates in the
United States and/or other countries.
ACCESS® and NetFront™ are trademarks or registered trademarks of ACCESS Co., Ltd. in Japan and other countries.
The Bluetooth® word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered
trademarks and are wholly owned by the Bluetooth SIG.
microSD™ and the microSD logo are Trademarks of the SD Card Association.

Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.

Table of Contents
Section 1: Getting Started ..............................................4

Section 4: Menu Navigation ......................................... 33

Understanding this User Manual . . . . . . . . . . . . . . . . . . . . . . . . 4
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Activating Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Setting Up Your Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Memory Card (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Using Widgets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Section 2: Understanding Your Phone ...........................9
Features of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Side Views of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Front View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Rear View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Command Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Understanding the Display Screen . . . . . . . . . . . . . . . . . . . . . 14
Your Phone’s Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Section 3: Call Functions ............................................. 20
Making a Call — Number Entry Dialing . . . . . . . . . . . . . . . . . . 20
Making a Call — Contact Dialing . . . . . . . . . . . . . . . . . . . . . . 21
Making a Call — Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . 22
Making a Call — Voice Dialing . . . . . . . . . . . . . . . . . . . . . . . . 23
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Ignoring a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Adjusting the Call Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Calls Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
1

Section 5: Understanding Your Contacts .................... 36
Your Contacts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Adding a New Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . 36
Finding a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Editing an Existing Contact Entry . . . . . . . . . . . . . . . . . . . . . . 42
Speed Dial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Renaming a Contacts Group . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Deleting a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Sending a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Memory Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Section 6: Entering Text ............................................... 49
Changing Text Entry Screens . . . . . . . . . . . . . . . . . . . . . . . . . 49
Changing the Text Entry Mode . . . . . . . . . . . . . . . . . . . . . . . . 52
Using T9® Mode (Phone Keypad Only) . . . . . . . . . . . . . . . . . . 53
Using Abc Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Entering Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Entering Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Section 7: Messaging ................................................... 56
Creating and Sending New Messages . . . . . . . . . . . . . . . . . . 56
Message Sending Options . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Receiving New Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
E-Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Erasing Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

64
65
67
67
68

Section 8: E-mail .......................................................... 70
Launching E-Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Camera Settings — Common Tab . . . . . . . . . . . . . . . . . . . . .
Camcorder Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Settings — Camcorder Tab . . . . . . . . . . . . . . . . . . . . . . . . . .
Camcorder Settings — Common Tab . . . . . . . . . . . . . . . . . .
The Photo Gallery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Point, Click, and Send Pictures and Videos . . . . . . . . . . . . . .

87
88
90
91
93
96

Section 14: Music Player ............................................. 97

Section 9: Alltel Shop ................................................... 71

Accessing the Music Player . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Finding Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Section 15: Multimedia .............................................. 102

Section 10: Alltel Web .................................................. 73
Browser Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Launching Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How Alltel Web Buttons Work . . . . . . . . . . . . . . . . . . . . . . . . .

73
73
73
74
74

Section 11: Alltel TV on Demand ................................. 75
Launching TV on Demand . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Section 12: Alltel Navigation ........................................ 76
Launching Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Section 13: Camera-Camcorder .................................. 77
Taking Pictures and Videos . . . . . . . . . . . . . . . . . . . . . . . . . .
Taking Snap Shots (Single Pictures) . . . . . . . . . . . . . . . . . . . .
Screen Layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Saving Pictures and Videos . . . . . . . . . . . . . . . . . . . . . . . . . .
Camera Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Camera Settings — Camera Tab . . . . . . . . . . . . . . . . . . . . . .

77
77
79
82
82
85

Accessing Multimedia . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
My Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
My Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
My Ringtones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
My Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

102
102
103
105
106

Section 16: Tools ........................................................ 109
Accessing Your Phone’s Tools . . . . . . . . . . . . . . . . . . . . . . .
Voice Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Memo Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
World Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stop Watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

109
109
113
116
118
119
121
123
124
125
128
2

Section 17: Changing Your Settings .......................... 129
Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Widget . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Sounds Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Call Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Phone Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Memory Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145

Section 18: Phone Info ............................................... 149
Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Icon Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149

Section 19: Health and Safety Information ............... 150
Health and Safety Information . . . . . . . . . . . . . . . . . . . . . . . . 150
Samsung Mobile Products and Recycling . . . . . . . . . . . . . . . 151
UL Certified Travel Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Consumer Information on Wireless Phones . . . . . . . . . . . . . . 152
Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Responsible Listening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159
Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
Using Your Phone Near Other Electronic Devices . . . . . . . . . 161
FCC Hearing-Aid Compatibility (HAC) Regulations for
Wireless Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161
Potentially Explosive Environments . . . . . . . . . . . . . . . . . . . . 163
Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163
FCC Notice and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
3

Other Important Safety Information . . . . . . . . . . . . . . . . . . . . 165
Product Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165
Availability of Various Features/Ring Tones . . . . . . . . . . . . . . 166
Battery Standby and Talk Time . . . . . . . . . . . . . . . . . . . . . . . 166
Battery Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 168

Section 20: Warranty Information ............................. 169
Standard Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 169

Index ............................................................................ 173

Section 2: Getting Started
This section explains how to start using your Samsung Delve
phone by activating your service, setting up your Voicemail, or
getting an understanding of how this manual is put together.

Understanding this User Manual
The chapters of this manual generally follow the same order as
the menus and sub-menus in your phone. A robust index for
quick reference to most features begins on page 173.
Also included is important safety information that you should
know before using your phone. Most of this information is near
the back of the guide, beginning on page 150.
Notes and Tips
Throughout this manual some text is set apart from the rest. In
this way, important information, quick methods for activating
features, to define terms, and more are emphasized. The
definitions for these methods are as follows:
• Notes — Explain alternative options within the current feature, menu,
or sub-menu.
• Tips — Provide quick or innovative methods for performing functions
related to the subject at hand.
• Important — Points out important information about the current
feature that could affect performance, or even damage your phone.

Text Conventions
This manual provides condensed information about how to use
your phone. To make this possible, the following terms and icon
appear in place of repeatedly-used procedural steps:
select

➔

Touch a menu item or screen item to launch, access,
or save a highlighted menu item or screen field of
interest.
Used in place of “select” in long “drill down”
procedure steps.
Example: “...Settings ➔ Call Settings ➔ Call Answer...”

Charging the Battery
Your phone is powered by a rechargeable standard Li-Ion battery.
Only use Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life. Use
of other accessories may invalidate your warranty and may
cause damage.

Getting Started

4

Use the Travel Adapter

Important!: You must unplug the adapter before removing the battery from
the phone during charging to avoid damage.

The travel adapter included
with your phone is a
convenient, light-weight
charger that rapidly charges
your phone from any 120/220
VAC outlet.
1.

Low battery indicator

Plug the large end of the Travel Adapter into a standard
120 VAC or 220 VAC wall outlet.

Important!: For connection to an electrical supply not located in North
America, you must use an adaptor of the proper configuration for
the power outlet. Use of the wrong adapter could damage your
phone and void your warranty.

The battery indicator (
) in the upper-right corner of the
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
• Five bars (
) indicate a full charge.
• An empty battery icon (
) indicates a near empty battery.
• A blinking empty battery icon (
) and a tone sounding indicate
you have two to three minutes before the battery is too low to operate
the phone.
If you continue to use your phone without charging its battery, the
phone will shut down.

Activating Your Phone
Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
Correct

Install the Battery

Incorrect

2.

Insert the smaller end of the Travel Adapter into the
charger/accessory connector at the bottom end of your
phone.

5

Note: Your phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel adapter.

Important!: You must fully charge the battery the first time you use your
phone, otherwise you could damage the battery. From fully
discharged to fully charged, the battery requires up to 4 hours of
charge time.

1.

2.

Insert the bottom end of the battery first, matching the

1.

Press and hold the Power On/Off-LOCK key (

) on

the top of your phone to turn it off (if on).
2.

Press down on the battery cover (1), slide the cover toward

gold contacts on the inside of the battery to those on the

the bottom end of the phone, then lift the cover (2) away

phone.

from the phone.

Press lightly on the top end of the battery down into the
phone until it slips into place.

3.

Remove the Battery

3.

Lift the battery up (1) and away (2) from the phone, top end
first.

Place the battery cover over the battery (1) and slide the
battery cover up into place (2).

Getting Started

6

Turn Your Phone On
1.

), on

Note: If your phone is on and you press
for less than one second, the
phone will not power off. This prevents your phone from being turned
off accidentally.

the top of the phone.
Note: As with any other radio-transmitting
device, do not touch the antenna (at the
bottom of the phone) while using your
phone as this can affect call quality and
can cause the phone to operate at a
higher power level than is necessary.

2.

Setting Up Your Voicemail
Voicemail allows callers to leave voice messages, which can be
retrieved any time.
Note: Once your Voicemail account has been set up, you can use the
Voicemail folder (under the Message menu) to view details of voice
messages in your Voicemail box.

The phone begins searching for a
network signal.

3.

Once the phone finds a signal, the
No Service icon (

phone, for two or more seconds. Your phone powers off.

Press

Press the LOCK key (

1.

) in the top

line of the display changes to a
Signal Strength icon [(
4.

) or (

)].

You’re now ready to place and receive calls.

Turn Your Phone Off

7

Press and hold the LOCK key (

or dial your own mobile number and press
to dial Voicemail. (For more information, refer to

Note: If you are outside of your carrier’s coverage or roaming area, the No
Service icon (
) appears at the top of the phone’s display. If you
cannot place or receive calls, try later when service is available, or at
another location.

䊳

In standby mode, press the Dialer soft key, then press and
hold

), on the top of the

“Making a Call — Number Entry Dialing” on page 20.)
2.

Follow the prompts in the new user tutorial to setup your
mail box.

Listen to Voicemail
1.

In standby mode, press the Dialer soft key, then press and
hold
or dial your own mobile number and press
to dial Voicemail. (For more information, refer to

“Making a Call — Number Entry Dialing” on page 20.)
After connecting, you will hear your voice greeting.
2.

Make sure that the label side of the card is face up, as
shown, then carefully slide the memory card into the

You are prompted to enter your password.

memory card slot until you feel it click into place.

Memory Card (Optional)

3.

Your phone has a memory card slot in the battery cavity, above
the battery. You can install a microSDTM card (up to 8GB) to
provide additional memory for storing files (such as, sound files
and photos) in your phone.
Install a Memory Card
1.

2.

Remove a Memory Card
1.

Open the microSD cover on the right hand side of the
phone.

2.

Carefully press the memory card inward until you feel it
release.

Open the microSD cover on the right hand side of the
3.

phone, as shown.

Replace the microSD cover.

Slowly release your pressure on the card. It will slide
outward a short distance.

4.

Remove the memory card from the memory card slot.

5.

If desired, install another memory card (see “Install a
Memory Card”).

6.

Replace the microSD cover.

Incorrect
Correct

Getting Started

8

Section 3: Understanding Your Phone
This section outlines some key features of your phone. It also
describes the screen format and the icons that will be displayed
when the phone is in use.

Side Views of Your Phone

Features of Your Phone
• Full-screen Touch Screen [high-resolution (240 x400 pixels), color]
• Widget menu
• Full-HTML Browser
• Messaging (Text, Picture, Video, and E-mail) with QWERTY Touch

Keypad
• 2.0 Megapixel wide screen Camera-Camcorder

10

• High speed data (CDMA 2000 1x Technology)
• Bluetooth® Stereo (v2.0) Wireless Technology (see Note)
• Global Positioning (GPS) Technology
11

• PIM Functions
• Voice and Touch Keypad Dial

12

• Music (MP3) Player and Video (MP4) Player
• Memory Card slot (for optional microSD™ cards — up to 8 GB)
Note: The Delve™ phone supports the wireless hands free profile and the
serial port profile for Bluetooth® v2.0 wireless technology. The Delve
does not support Bluetooth OBEX profiles.

9

Features
1.

Headset Connector — Used to connect an optional wired
headset or TTY device to your phone.

2.

Power / Accessory Connector — Used to connect charging

8.

accessories or any available accessory cables to your
phone.
3.

Volume Key — Lets you adjust the ring volume in standby
mode, adjust the voice volume during a call, or mute the
ringer during an incoming call.

4.

Send Key — Lets you place or receive a call. In standby
mode, press the key once to access the Recent Calls log.

5.

Clear Key — Deletes characters from the display when you
are in text entry mode. Press this key to return to the
previous menu or screen when navigating features on your
phone.

6.

Power On-Off/LOCK key — Turns the power on and off.
Locks and unlocks the keys and the touch screen and
lights the backlight.

9.

Memory Card Slot — Used to plug in an optional
microSD™ memory card for additional multimedia file
storage.

10. Voice Recognition Key — Used to launch VoiceSignal voice

recognition system.
11. Camera Key — Launches the Camera-Camcorder feature

of your phone and takes pictures or records videos.
12. End Key — Ends a call. Returns you to standby mode from

any feature, function, or menu.

Display — Indicates the status of your phone (including
numbers dialed, feature and function screens, status
icons, message indicators and contents, signal strength,
and so on) and shows all touch controls (hot buttons,
keypads, and menus).

7.

Earpiece / Speaker — Lets you hear ringing and alert
tones, alarm tones, and the other parties to calls.

Understanding Your Phone

10

Front View of Your Phone

2.

Volume Key — Lets you adjust the ring volume in standby
mode, adjust the voice volume during a call, or mute the
ringer during an incoming call.

3.

Display — Indicates the status of your phone (including
numbers dialed, feature and function screens, status
icons, message indicators and contents, signal strength,
and so on) and shows all touch controls (hot buttons,
keypads, and menus).

4.

Send Key — Lets you place or receive a call. In standby
mode, press the key once to access the recent calls log.

5.

Clear Key — Deletes characters from the display when you
are in text entry mode. Press this key to return to the
previous menu or screen when navigating features on your
phone.

6.

Microphone — Lets the other caller hear you clearly when
you are speaking to them.

7.

Features
1.

Earpiece / Speaker — Lets you hear ringing and alert
tones, alarm tones, and the other parties to calls.

11

End Key — Ends a call. Returns you to standby mode from
any feature, function, or menu.

8.

Camera Key — Launches the Camera-Camcorder feature
of your phone and takes pictures or records videos.

9.

Voice Recognition Key — Used to launch VoiceSignal voice
recognition system.

Rear View

Features
1.
2.

Camera Lens — The lens of your built-in camera.
Mirror — Lets you position the Camera Lens to take self
portraits.

3.
4.

Battery Cover — Lets you access your phone’s battery.
Camera Key — Launches the Camera-Camcorder feature
of your phone and takes pictures or records videos.

Command Keys
Power On-Off/LOCK key
• Press and hold the Power On-Off/LOCK key (
) to turn your
phone on or off.
• With the phone keys and touch screen locked, press and hold the
Power On-Off/LOCK key (
) to unlock the phone.
Note: With the phone locked, you can still answer incoming calls by pressing
the Talk key.

Volume Key
• In standby mode, press the Volume key on the upper left side of the
phone Up or Down to adjust the volume of the incoming calls ringer.
• When receiving a call, press the Volume key Up or Down to mute the
ringer.
Understanding Your Phone

12

• During a call, press the Volume key Up or Down to adjust the voice

• If you enter an incorrect character, briefly press

volume in the Earpiece-Speaker.
• When playing a music file or video clip, press the Volume key Up or
Down to adjust the playback volume.

(and delete) the character.
• To erase the entire sentence, press and hold
• To back up one menu level, briefly press

Soft Keys
Functions for the soft keys are defined by what appears above
each in the display. There are four soft keys across the bottom of
the display.
Send Key
The Send key (
) is used to answer calls, dial calls, and to
recall the last number(s) dialed, received, or missed.
• Press
once to answer calls.
• Enter a number and briefly press
to make a call.
• Briefly press
in standby mode to display a list of recent calls
to and from your phone.
• Press
twice in standby mode to call the most recent number.
• Press
to pick up a waiting call. Press
again to switch
back to the other call.
Clear Key
The Clear key (
) is used to erase or clear numbers, text, or
symbols from the display. You can also use the key to return to a
previous menu or to return to standby mode from any menu.
13

to backspace
.
.

End Key
• Briefly press
once to disconnect a call.
• Press
to return to standby mode from any menu, or to cancel
the last input.
Camera Key
Use the Camera key on the right side of the phone to launch the
Camera function on your phone by pressing and holding this key.

Understanding the Display Screen
1.

The top line of your

5.

phone’s display contains

5

Note: To close the Widget bar, tap on the left arrow tab on the right edge of
the bar.

icons that indicate
network status, battery

To close the shortcut bar, tap anywhere on the screen below the bar.

power, signal strength,
connection type, and

2

Tapping the right arrow

Display Screen Icons

To access the Icon Glossary:

tab on the left side of the

䊳

display opens the Widget
3

bar that lists available
shortcut widgets.
3.

4

Your Delve phone can show you definitions of the icons that
appear on the top line of the display.

more.
2.

Tapping the top line of the display pulls down a four-icon
shortcut bar.

1

The bottom line of the display shows available soft keys.
The sample screen shows the following soft keys:

• Dialer — Launches the Dialer screen that lets you place calls.
• Contacts — Launches the Contacts list screen.
• Messages — Launches the Messages menu.
• Menu — Launches the Main Menu.
4. The center portion of the display shows information such

In standby mode, press Menu, then select Phone Info ➔
Icon Glossary. A list appears showing the icons that can
appear on the top line of the displays.

Dialogue Boxes
Dialogue boxes prompt for action, inform you of status, or warn
of situations such as low battery. Dialogue boxes and their
definitions are outlined below.
• Choice
– Example: “Save Message?”
• Reconfirm
– Example: “Erase All Messages?”

as call progress information, messages, and photos.
Understanding Your Phone

14

• Performing
– Example: “Sending...” “Connecting...”
• Completed
– Example: “Message Saved”
• Information
– Example: “New Message”
• Error
– Example: “System Error!”
• Warning
– Example: “Low Battery,” “Memory Full!”

Backlight
The backlight illuminates the display. When you press any key or
open the phone, the backlight comes on. It goes off when the
screen and phone keys are not pressed within a period of time
set in the Backlight Time menu.
Note: During a phone call, the display backlight dims and turns off after 10
seconds to conserve battery power, regardless of the Backlight Time
setting.
(For more information, refer to “Backlight” on page 132.)

Your Phone’s Modes
Call Answer Mode
You can choose to answer a call by pressing any key except
or
, or by pressing only the
key. (For
more information, refer to “Call Answer” on page 136.)
Input Mode
Input mode determines how you enter text, numbers, and
symbols. While at any text entry screen, press the down arrow in
the upper left corner of the screen, then select the input mode
from the drop-down menu. Optional input modes are:
• 3X4Keypad (phone-style touch keypad)
• QWERTY (full touch keypad — changes display to landscape mode)
• Handwriting box (divided pallet)
• Handwriting full screen (undivided pallet)
(For more information, refer to “Changing the Text Entry Mode”
on page 52.)
Tip: When using the 3X4Keypad mode, you can also choose between Abc/
ABC, T9 Word, and 123 by pressing the Entry Mode soft key.

Lock Mode
When the phone is in Lock Mode, restrictions are placed on
phone use. You can receive calls and messages, but cannot place
15

outgoing calls (except for emergency numbers) until you unlock
the phone. Lock Mode also restricts access to menus and the
Volume key.
To enter Lock Mode:
䊳

• When you press

Place Calls in Standby Mode

In standby mode, press

1.

In standby mode, enter a phone number, and press

on the top of the
phone. The lock mode screen
appears momentarily in the
display, then the screen goes
To exit Lock Mode:

While in Lock mode, press
and hold

to place a call.
2.

Press

to return to standby mode.

Receive Messages in Standby Mode

While your phone is in standby mode, new incoming messages
automatically appear in the screen as they are received. Use the
Navigation key to scroll through text or to view complete images.

dark.

䊳

after a call or from within a menu.

In standby mode, you will see the time, day, and date as well as
all phone status icons.

until the

standby mode screen
appears in the display.
(For more information, refer to “Change Lock Code” on
page 140.)
Standby Mode
Standby mode is the state of the phone once it has found service
and is idle. The phone goes into standby mode:
• After you power the phone on.

Talk Mode
You can place and receive calls only when your phone is on.
While in a call your phone is in talk mode. During a call, a number
of option buttons are available in the call screen. (For more
information, refer to “The In-Use Options” on page 34.)
Speakerphone Mode

During a call, you can place the Delve in Speakerphone mode,
allowing you to conduct your call hands-free and/or to share the
call with nearby people.
• To turn Speakerphone mode on, during a call, press
.
Understanding Your Phone

16

Warning!: To avoid hearing damage, move the phone away from your ears
while in Speakerphone mode. (For more information, refer to
“Responsible Listening” on page 159.)

• To turn Speakerphone mode off, end the call or press

.

Enter/Exit Silent Mode
Silences the ringers, the alerts, and the tones your keypad makes
when you press a key.

Note: The Volume key is on the left side of phone.

Adjust the Ringer
To adjust the Ringer volume, while in standby mode, press the
Volume key up or down.
1.

the call ringer volume as desired.

To enter Silent Mode:
䊳

Options are:

In standby mode, press and hold the Volume key
(

•
•
•
•
•

) Down until “Sound off activated” appears in the

display.
To exit Silent Mode:
䊳

While in Silent mode and standby mode, press and hold
the Volume key (

In standby mode, press the Volume key up or down to set

) Up until “Normal mode

2.

Silence all
Alarm only
Vibrate only
1 Beep
Low

•
•
•
•

Low/Medium
Medium
Medium/High
High

When you are satisfied with the setting, release the Volume
key. Your phone returns to standby mode.

activated” appears in the display and the original ringer
value appears.
Vibrate Mode
䊳

In standby mode, repeatedly press the Volume key
(
display.

17

) down until “Vibrate only” appears in the

Note: The Vibrate icon ( ) appears in the display when the phone is in
Vibrate mode. The No Ring icon (
) appears in the display when the
phone is in Silence All mode.

Music Player Mode
The Music Player in your phone can play music files (MP3, CMX,
Midi, AAC, AAC+, and eAAC+), but only if they are stored in the
My Music folder on an optional microSD™ Memory Card.

Note: For more information, refer to “Memory Card (Optional)” on page 8.

• Entering Music Player Mode:
䊳

In standby mode, press the Menu soft key, then select
Multimedia ➔ Music Player.

Note: For more information, refer to “Music Player” on page 97.

Camera Mode
Camera mode lets you take pictures with your phone’s camera.
In Camera mode, you can also adjust the resolution and
appearance of your pictures.
For more information, refer to “Camera-Camcorder” on
page 77.
• Entering Camera Mode:
– In standby mode, press and hold the Camera key (
) — on the
right side of the phone.
– Or –
– In Camcorder mode, press the Mode button (
).
• Exiting Camera Mode — Press the
key.

Camcorder Mode
Camcorder mode lets you record videos with your phone’s
camera. In Camcorder mode, you can also adjust the resolution
and appearance of your videos.
For more information, refer to “Camera-Camcorder” on
page 77.
• Entering Camcorder Mode:
– In standby mode, press and hold the Camera key (
) — on the
right side of the phone.
– In Camera mode, press the Mode button (
).
• Exiting Camcorder Mode — Press the
key.
Video Player Mode
The Video Player in your phone can play video files [3GS, MP4,
H.263, and H.264 (Decoding : QCIF Only)], but only if they are
stored in the My Video folder in the phone or on an optional
microSD™ Memory Card.
Note: For more information, refer to “Memory Card (Optional)” on page 8.

• Entering Video Player Mode:
1.

In standby mode, press the Menu soft key, then select
Multimedia ➔ My Videos.
– or –
Understanding Your Phone

18

In camcorder mode, press the Gallery soft key.
A list of thumbnail images with their file names appears in
the display.
2.

Select the desired video. The Video Player screen appears
in the display and begins playing the highlighted video.

Note: For more information, refer to “Video Player” on page 104.

19

Section 4: Call Functions
This section explains how to make or answer a call. This section
also includes the features and functionality associated with
making or answering a call.

Making a Call — Number
Entry Dialing
1.

In standby mode, press the
Dialer soft key. The touch

1.

In standby mode, press the Dialer soft key. The touch

2.

Enter 911 using the touch keypad.

3.

Press

keypad screen appears in the display.

or the Voice Call soft key to place the call.

Important!: Emergency number 911 is preset into your phone. You can dial
this number almost any time, even when the phone is locked or
restricted.

keypad screen appears in the
If you call 911 an audible tone is heard and an Emergency
prompt appears in the display for the duration of the call.

display.
2.

Enter the number you wish to
call using the touch keypad.

3.

Press

or the Voice

Call soft key to place the call.
Dialing Emergency Numbers
When you call an Emergency Number, such as 911, your phone
locks itself in emergency mode, only allowing you to make calls
to the emergency call center you originally contacted. This
enables emergency operators to more easily dispatch aid, such
as police, fire fighting, and emergency medical personnel.

Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Important!: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
Note: You can specify other numbers than 911 as emergency numbers using
the Emergency # settings. (For more information, refer to “Emergency
#” on page 141.)

Call Functions

20

Manual Pause Calling
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
• T Pause — A two-second pause stops the calling sequence for two
seconds and then automatically sends the remaining digits.
• P Pause — A hard pause stops the calling sequence until you press
.
To manually call a number with pause(s) without storing it to your
Contacts:
1.

In standby mode, press the Dialer soft key. The touch
keypad screen appears in the display.

2.

Enter the number you wish to call.

3.

Press the Add Pause soft key.
A pop-up menu containing the following options appears in

Tip: You can create pauses longer than two seconds by entering multiple T
Pauses.

4.

Select the desired pause option. The respective letter (T or
P) is added to your number entry.

5.

Press

or the Voice Call soft key to call the number.

Making a Call — Contact
Dialing
You can store phone numbers and
contact names in your phone’s
Contacts list. To call one of your
contacts, do the following:
1.

In standby mode, press the
Dialer soft key. The touch
keypad screen appears in the
display.

2.

Press the Contacts button

the display:

(

• T Pause — a two-second pause.
• P Pause — a hard pause (awaits input from you).

appears in the display.
3.

). The Contacts list

Select the desired Contacts entry’s radio button. A blue dot
appears in the button.

21

phone’s Contacts list and assigned Speed Dial numbers 002
through 009 by pressing and holding a single key.

If the selected Contacts entry
has more than one number,
the entry’s information

Example: For Speed Dial number 003, press the Dialer soft key, then press
and hold
until the name and number appear in the display and
the number is dialed.

appears in the display.
• Select the number you wish to
dial.
4. Press the Add soft key.
5.

Two-Touch Dialing
Memory locations 010 through 030 are special Two-Touch
dialing locations.

The selected Contact’s
number appears in the Dialer

Example: For Speed Dial number 013, press the Dialer soft key, then briefly
press
, then press and hold
until the name and number
appear in the display and the number is dialed.

screen.
6.

To call the number, press the
Voice Call soft key or press

.

Making a Call — Speed Dialing
Speed Dialing lets you quickly and easily dial any contact in your
Contacts list by using that contact’s Favorites number in the list.
You can assign and change Favorites (speed dial) numbers for
your contacts. (For more information, refer to “Assigning a Speed
Dial Number” on page 44.)
One-Touch Dialing
Speed Dial numbers 002 through 009 are special One-Touch
dialing numbers. You can call the phone numbers stored in your

Pause Dialing From a Contacts Entry
• If you speed dial a contact that contains two-second (T) pause(s)
simply wait for the pauses to pass and the dialing to complete.
• If you speed dial a contact that contains hard (P) pauses, wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and press
to
continue your dialing sequence.
Note: For more information about dialing pauses, refer to “Manual Pause
Calling” on page 21.

Call Functions

22

Making a Call — Voice Dialing

3.

Contacts list, first name followed by last name.

Your Delve mobile phone includes state-of-the-art voice
recognition software that lets you dial numbers using your voice.

If the name is recognized, Voice Dial repeats the name and

Using Voice Dial

dials the number.

Use the Voice Dial command to dial any number stored in your
Contacts list by saying the name of the contact (Name Dialing).
You can also use Voice Dial to dial any valid telephone number,
even numbers not stored in your contact list, by speaking the
individual digits in the number (Digit Dialing).

If Voice Dial is not sure which name you said, it prompts
you with “Call?” followed a choice list of up to three
names.
4.

Voice Dialing Tips:
• Speak clearly at a normal volume, as if you were talking to someone

on the phone.
• When saying a name, say the first name then the last name.
Dialing a Name

To dial a name, do the following:

2.

In standby mode, press the Voice Recognition key (

page 110.)
).

If the recognized/selected name has multiple numbers

“Say a Command” appears in the display and is

stored for it (that is, Home, Work, Mobile, and so on), Voice

pronounced through the earpiece.

Dial displays the possible choices and prompts you with

Say, “Call”. You are prompted to “Say the name or #”.

“Which number?”
5.

23

Do one of the following:
• Press one of the name buttons.
• Say “Yes” to confirm the first name.
• Say “No” to hear the next name.
• Say “Repeat” to hear the names again.
• Say “Cancel” to exit Voice Service without dialing.
(For more information, refer to “Confirmation” on

• Wait for the beep before speaking.

1.

Speak clearly and say the name of a person in your

Say one of the following number types:

• “Home”
• “Work”
• “Mobile”
Voice Dial dials the specified number.

• Say “No” to hear the next number.
• Say “Repeat” to hear the numbers again.
• Say “Cancel” to exit Voice Service without dialing.
(For more information, refer to “Confirmation” on

Dialing a Number

page 110.)

To dial a number using Voice Dial, do the following:
1.

In standby mode, press the Voice Recognition key (

).

“Say a Command” appears in the display and is
pronounced through the speaker.
2.

Say “Call”. VoiceSignal prompts you to “Say the name or
#”.

3.

Speak clearly and say the telephone number of the person
you want to call. For example, say “7 8 1 9 7 0 5 2 0 0."
If it recognizes the number, Voice Dial repeats and dials the
number. If Voice Dial is not sure it has recognized the
number, it displays and prompts you with “Call?” followed
by a choice list of up to three numbers.

4.

Do one of the following:
• Press one of the number buttons.
• Say “Yes” to confirm the first number.

Pause Dialing From a Contacts Entry
• If you voice dial a contact that contains (hard waits) P Pauses(s), wait
for the appropriate prompt(s) from the number you are calling (credit
card number, bank account number, and so on) and enter the
appropriate response(s).
• If you voice dial a contact that contains (two-second) T Pause(s) simply
wait for the pauses to pass and the dialing to complete.

Answering a Call
Your phone notifies you of a call in the following ways:
• A ring tone sounds and/or your phone vibrates (Your phone provides
eight ring volume settings including: Silent all, Alarm only, Vibrate
only, 1 Beep, Low, Low/Medium, Medium, Medium/High, or
High, and/or different ring types to distinguish callers.)
• A phone number (unless blocked by the caller) and a name appear in
the display (If the caller’s number and name are stored in your
Contacts list).
• If the caller can’t be identified, Call from unavailable#, Call from
restricted number, or no number appears in the display.
Call Functions

24

• Your phone continues to notify you of the call until one of the following

events occurs:
• You answer the call.
• You ignore the call.
• The calling party ends the call.
• The call is sent to voicemail.

The Calls log retains information about Outgoing, Incoming, and
Missed calls. You can also view times for your last call and the
time totals for all calls.
Review the Calls Log
1.

Answering an Incoming Call
䊳

Press the

Calls Log

Menu soft key, then select

key. The ring tone and/or vibration stop

Calls. The Calls list appears

and the caller’s voice can be heard in the earpiece.
Tip: You can set your phone to answer calls automatically or when you press
any key but
. (For more information, refer to “Call Settings” on
page 136.)

key. The caller

is forwarded to your voice mail.

Adjusting the Call Volume
䊳

In standby mode, repeatedly press the Volume key Down
until the Call Volume Level desired appears in the display.
The Volume key is on the left side of phone.

25

2.

Select the Down arrow in the
screen. The following Calls

When you ignore an incoming call, the call is immediately
forwarded to your voice mail.
During an incoming call, press the

in the display showing All
calls.
upper right corner of the

Ignoring a Call

䊳

In standby mode, press the

log options appear in a dropdown menu:
•
•
•
•
•

All
Incoming
Outgoing
Missed
Data

Note: To review your Delve’s Call Timers or Data Counters, press the Call
Timer soft key or the Data Counter soft key.

3.

Select the Calls log that you wish to review.

Note: In cases where a Calls log entry concerns a call to or from a Contacts
entry, the Contact name associated with the number appears in the
Calls log list instead of the number.

4.

The following functions are also available:

• Dialer — Press this soft key to launch the Dialer screen and place
a call.
• Erase — Press this soft key to delete selected or All unlocked calls
from the displayed call log.
• Lock / Unlock — Press this soft key to block/permit deletion of
individual calls.
• Call Timer — Press this soft key to list the duration of the Last Call;
total durations of all Outgoing Calls, Incoming Calls, Roaming Calls,
All Calls since the timers were last reset; the date and time the
timers were last reset; and the total duration of Lifetime Calls (all
calls since your phone was activated — this timer cannot be reset).
Outgoing Calls
Your phone retains information about the last 90 outgoing calls
and stores them in the Outgoing calls log. You can review the
Outgoing calls log for the time and date of a call, as well as other
information.

Note: In standby mode, you can quickly view your most recent calls of all
types by briefly pressing
. A list containing up to 270 of your
most recent outgoing, incoming, and missed calls appears in the
display.

1.

In standby mode, press the Menu soft key, then select
Calls. The Calls list appears in the display showing All
calls.

2.

Select the Down arrow in the upper right corner of the
screen, then select Outgoing. A list of Outgoing Calls
appears in the display.

3.

Select a call to view further
information about it. The call
information screen shows the
recipient’s name (Contacts
only), the number dialed, the
time and date the call was
made, and the duration of the
call.

4.

The call information screen
offers the following options:
Call Functions

26

•
•

•
•
•
•
•

— Press to dial this number.
— Press to send a Text, Picture, or Video message to this
number. (For more information, refer to “Creating and Sending
New Messages” on page 56.)
To add the number to your Contacts list, press the Add To Contacts
soft key.
Contacts only — To view Contact information for this call, press the
View details soft key.
To delete the selected call from your Outgoing calls log, press the
Erase soft key.
To block / permit deletion of the selected call, press the Lock /
Unlock soft key.
To copy this number to the Dialer screen so that you can make
changes (such as, to add Pauses) before reuse, press the Copy to
dialer soft key.

Incoming calls log for the time and date of the call, as well as
other information.
1.

In standby mode, press the Menu soft key, then select
Calls. The Calls list appears in the display showing All
calls.

2.

Select the Down arrow in the upper right corner of the
screen, then select Incoming. A list of Incoming Calls
appears in the display.

3.

Select a call to view further
information about it. The call
information screen shows the
caller’s name (Contacts only),
the number called received

Note: When viewing an outgoing call to a Contact, press the More soft key to
access the Lock / Unlock and Copy to dialer options.

from, the time and date the
call was received, and the

5.

To review another Outgoing call, press the Left and Right
arrow keys at the top of the screen.

Incoming Calls
Your phone retains information about the last 90 Incoming calls
and stores them in the Incoming calls log. You can review the
27

duration of the call.
4.

The call information screen
offers the following options:
•

— Press to dial this
number.

•

•
•
•
•
•

— Press to send a Text, Picture, or Video message to this
number. (For more information, refer to “Creating and Sending
New Messages” on page 56.)
To add the number to your Contacts list, press the Add To Contacts
soft key.
Contacts only — To view Contact information for this call, press the
View details soft key.
To delete the selected call from your Incoming calls log, press the
Erase soft key.
To block / permit deletion of the selected call, press the Lock /
Unlock soft key.
To copy this number to the Dialer screen so that you can make
changes (such as, to add Pauses) before reuse, press the Copy to
dialer soft key.

1.

In standby mode, press the Menu soft key, then select
Calls. The Calls list appears in the display showing All
calls.

2.

Select the Down arrow in the upper right corner of the
screen, then select Missed. A list of Missed Calls appears
in the display.

3.

Select a call to view further
information about it. The call
information screen shows the
caller’s name (Contacts only),
the number called received
from, the time and date the

Note: When viewing an incoming call from a Contact, press the More soft key
to access the Lock / Unlock and Copy to dialer options.

call was received, and the
duration of the call.

5.

To review another Incoming call, press the Left and Right
arrow keys at the top of the screen.

Missed Calls
Your phone retains information about the last 90 missed calls
(calls that were never picked up) and stores them in the Missed
calls log. You can review the Missed calls log for the time and
date of the call, as well as other information.

4.

The call information screen
offers the following options:
•

— Press to dial this
number.

•

— Press to send a Text, Picture, or Video message to this
number. (For more information, refer to “Creating and Sending
New Messages” on page 56.)
Call Functions

28

• To add the number to your Contacts list, press the Add To Contacts
soft key.
• Contacts only — To view Contact information for this call, press the
View details soft key.
• To delete the selected call from your Missed calls log, press the
Erase soft key.
• To block / permit deletion of the selected call, press the Lock /
Unlock soft key.
• To copy this number to the Dialer screen so that you can make
changes (such as, to add Pauses) before reuse, press the Copy to
dialer soft key.
Note: When viewing a missed call from a Contact, press the More soft key to
access the Lock / Unlock and Copy to dialer options.

5.

To review another Incoming call, press the Left and Right
arrow keys at the top of the screen.

All Calls
You can review all of the calls log entries (outgoing, incoming,
and missed calls) for the time and date of a call, as well as other
information.
1.

In standby mode, press the Menu soft key, then select
Calls. The Calls list appears in the display showing All
calls.

29

2.

Select a call to view further information about it. The call
information screen shows the caller’s name (Contacts
only), the number called (by), the time and date the call
was made / received, and the duration of the call.

3.

The call information screen offers the following options:
•
•

— Press to dial this number.
— Press to send a Text, Picture, or Video message to this
number. (For more information, refer to “Creating and Sending
New Messages” on page 56.)
• To add the number to your Contacts list, press the Add To Contacts
soft key.
• Contacts only — To view Contact information for this call, press the
View details soft key.
• To delete the selected call from your Calls log, press the Erase soft
key.
• To block / permit deletion of the selected call, press the Lock /
Unlock soft key.
• To copy this number to the Dialer screen so that you can make
changes (such as, to add Pauses) before reuse, press the Copy to
dialer soft key.
4. To review another call, press the Left and Right arrow keys
at the top of the screen.

Data Calls
You can review all of the data calls log entries for the time and
date of a call, as well as other information.
1.

In standby mode, press the Menu soft key, then select
Calls. The Calls list appears in the display showing All
calls.

2.

keys at the top of the screen.

Select the Down arrow in the upper right corner of the
screen, then select Data. A list of Data Calls appears in the
display.

3.

• To block / permit deletion of the selected call, press the Lock /
Unlock soft key.
• To review the amounts of data Transmitted, Received, Total
exchanged since the last time the counters were reset, the date
and time the counters were last reset, and the Lifetime data count,
press the Data Counter soft key.
5. To review another Data call, press the Left and Right arrow

Select a call to view further
information about it. The call

Call Timer
View the duration of your last call, total calls, and calls made
during the life cycle of you phone using the Call Timer feature.
Note: Call Timer is not for billing purposes.

information screen shows the

4.

the number called or called

1.

In standby mode, press Menu ➔ Calls.

by, the time and date the call

2.

Press the Call Timer soft key. The following options appear

was placed or received, and

in the display:

the duration of the call.

• Last Call — View the duration of your last call.
• Outgoing Calls — View the duration of the total outgoing calls
made on your phone since all timers were last reset.
• Incoming Calls — View the duration of the total incoming calls
received on your phone since all timers were last reset.
• Roaming Calls — View the total calls duration on your phone
while roaming since all timers were last reset.

The call information screen
offers the following options:
• To delete the selected call from
your Data calls log, press the
Erase soft key.

Call Functions

30

• All Calls — View the duration of the total call, incoming, outgoing,
and data calls made on your phone since all timers were last reset.
• Last Reset — View the time and date all timers were last reset.
• Lifetime Calls — View the number and total duration of all calls
since your phone was activated.
3. Press the Reset soft key to reset all counters except
Lifetime Calls.
Note: Although Total Calls timers can be erased, the Lifetime Calls timer can
never be erased.

Data Counter
View the amount of Transmit data, Receive data, and Total data
transmitted or received since the last time you reset the data
counters, and the Lifetime amount of data transmitted or
received.

3.

Press the Data Counter soft key. The following options
appear in the display:

• Transmitted — View the total amount of data transmitted by your
phone since the last reset.
• Received — View the total amount of data received by your phone
since the last reset.
• Total — View the total amount of data sent or received by your
phone since the last reset.
• Last Reset — View the time and date all timers were last reset.
• Lifetime Data Counter — View the total amount of data sent or
received by your phone since activation (Lifetime Data Counter
cannot be reset).
4. Press the Reset soft key to reset all counters except
Lifetime Data Counter.
Note: Although Total data counters can be erased, the Lifetime Data Counter
can never be erased.

Note: Data Counter is not for billing purposes.

1.

In standby mode, press Menu ➔ Calls.

2.

Select the Down arrow in the upper right corner of the
screen, then select Data. A list of Data Calls appears in the
display.

31

Roaming
What is Roaming?
Roaming lets you use your phone when you travel outside of your
Wireless Provider’s coverage area. The Roaming icon ( )
appears in the top line of the display when Roaming is active,
and extra charges may apply when making or receiving calls.

Note: Some features may be unavailable while roaming. Roaming also
consumes additional power from the battery requiring more frequent
recharging. Contact your Wireless Provider for more information about
Roaming.

How Roaming Works
Roam Option lets you set roaming preferences if you move in and
out of your home network. The following roaming options are
available:
• Home Only — Your phone is available for normal operation only in the
designated coverage area.
• Automatic — Your Wireless Provider’s Preferred Roaming List (PRL) of
networks is used to acquire service. If no preferred networks are
found, any digital system is acquired.
Note: For more information, refer to “System Select” on page 143.

Call Functions

32

Section 5: Menu Navigation
This section explains the menu navigation for your phone. It also
describes the menus available with your phone.

Menu Navigation

Widget Bar Shortcuts
1.

right arrow tab on the left

Access menus using the Menu soft
key, other soft keys, or icons on the
Widget Bar or Shortcut Bar.
1.

edge of the display. The
Widget Bar slides open to the
right and lists icons for those

In standby mode, press the

Widgets selected in the

Menu soft key. The Main

Widget settings. (For more

Menu appears in the display.
2.

menu shown in the display.
Return to the Previous Menu
Press

33

information, refer to “Widget”

Select icons or menu options
to access a menu or sub-

to return to the previous menu.

In standby mode, press the

on page 129.)
2.

Scroll through the Widget list
by pressing and sliding within the Widget Bar until a
desired Widget icon appears.

3.

Press, hold, and slide the icon
to the right until it is free of
the Widget Bar. The icon now
displays on the standby
screen and expands in size.

Note: You can position a Widget icon as
needed by pressing, holding, and
sliding it.

The In-Use Options
Access numerous menus and
features even while in a call.
Note: If the call is disconnected while
accessing the In-Use Option, the InUse Option disappears from the
display and the phone eventually
returns to standby mode.

1.
4.

While in a call, the following

Select a Widget icon on the

buttons and soft keys appear

standby screen to launch its

in the display:

function.
Note: You can return a Widget icon to the Widget Bar simply by pressing,
holding, and sliding the icon until it overlaps the Widget Bar.

5.

Close the Widget Bar by pressing the left arrow tab.

Turns Speakerphone mode On/Off. (For more
information, refer to “Speakerphone Mode” on
page 16.)
With Bluetooth on and a Bluetooth headset
connected with your Delve, switches the call
sounds to the Bluetooth Headset.

Menu Navigation

34

With Bluetooth on and a Bluetooth headset
connected with your Delve, switches the call
sounds from the Bluetooth Headset and back to
the phone.
Mutes/unmutes the microphone on your Delve.
Allows you to speak to someone else without
being overheard by the other party on your call.
Opens the Memo Pad. (For more information,
refer to “Memo Pad” on page 118.)
Launches the Voice Memo Recorder. (For more
information, refer to “Voice Memo” on
page 107.)
Ends the current call and returns the Delve to
Standby mode.
Soft Keys

The following soft keys are available during a call:
• Dialer — Opens the Dialer screen to enable you to place another call
while the current call remains active.
• Contacts — Opens the Contacts list screen.
• Messages — Launches the Messages menu.
35

• Add To Contacts — Lets you add the other party’s number to your

Contacts list.

Using Widgets
Widgets are special icons that you can use to launch particular
phone features and functions or to quickly access particular
Internet addresses. You can initially access the widgets on your
Delve phone by displaying the Widget Bar.
Widget Bar
The Widget Bar is an easily accessed list of widgets that acts like
a menu or storage bay for your widgets.
1.

To open the Widget Bar, tap the folder tab located on the
left side of the standby screen. The Widget Bar slides open
to the left, revealing the currently available widgets.

Tip: You can hide or display individual widgets by changing the Widget
settings. (For more information, refer to “Widget” on page 129.)

2.

To close the Widget Bar, tap the folder tab again.

Section 6: Understanding Your Contacts
This section explains how to manage your daily contacts by
storing their name and number in your Contacts. Contacts entries
can be sorted by name.

2.

screen appears in the display.
• Enter the first few letters of the Contact’s name. A list of Contacts
with names matching the letters you entered appears below the
Search field.
• Select the desired Contact to display it’s information.

Your Contacts List
Your Contacts list can store up to 500 entries, with each contact
having up to five associated phone numbers, an e-mail address,
and a picture ID.
Each phone number can be up to 32 digits in length, including
hard pauses. Contact names can be up to 32 characters in
length. You can also specify a memory location for each entry,
and you can restrict access to the Contacts list to prevent
unauthorized use.

To find a Contact, select the Search field. The 3X4 Keypad

Adding a New Contacts Entry
You can add an entirely new entry to your Contacts list or add
information to an existing entry.
Using the Contacts Add Option
1.

In standby mode, press the Contacts soft key. The Contacts
screen appears in the display.

Tip: One-Touch and Two-Touch Dialing allow you to call numbers stored in
your Contacts list faster. (See page 22.)

Open Your Contacts List
1.

In standby mode, press the Contacts soft key. The Contacts

Note: In standby mode, press the Menu soft key and select Contacts.

2.

Press the New Contact soft key. The New Contact screen
appears in the display.

screen appears in the display.
Note: In standby mode, press the Menu soft key and select Contacts.

Understanding Your Contacts

36

3.

Select the Name field. The

Contact to a Group. This lets
you send messages to and

associate with the new
Contact. (For more
information, refer to “Entering
Text” on page 49.)
Select a phone number field (Mobile, Mobile 2, Home, Work,
or Fax) or the e-mail address (E-mail) field. The 3X4
Keypad text entry screen appears in the display.
• If desired, select another text entry screen. (For more information,
refer to “Changing Text Entry Screens” on page 49.)
6. Enter a number or address for the new Contact. (For more
information, refer to “Entering Text” on page 49.)

37

If desired, assign the new

appears in the display.
• If desired, select another text
entry screen. (For more
information, refer to “Changing
Text Entry Screens” on
page 49.)
4. Enter a name or phrase to

5.

7.

3X4 Keypad text entry screen

find this Contact and other
related contacts. (For more
information, refer to “Group”
on page 41.)
• Select the General field. The
Select Group screen appears in
the display. The following groups
are available:
– New Group
– Family
– Friends
– Colleagues
– Business
• Select the preferred group. A message pops-up confirming the
group assignment for this Contact.
8. If desired, select a unique Ringtone or voice memo file to
identify this new Contact. (For more information, refer to
“Ringer Type” on page 134.)

9.

If desired, enter an additional phone number (Mobile 2,

• Update existing — Lets you add the number or e-mail address
you just entered to an existing Contacts entry.

Home, Work, or Fax) or e-mail address (Email) for the new
Contacts entry.
10. If desired, select an identifying image by highlighting the

photo ID field and pressing the Set soft key. The My Images
screen appears in the display. (For more information, refer

Tip: You can also store a phone number from standby mode by entering the
number, and pressing the Save soft key.

Creating a new Contacts entry:
3.

to “My Images” on page 102.)

in the display with the number you’re saving populating
the Mobile field.

11. To save the new Contacts entry, press the Save soft key.

Saving a Number from a Call

4.

) The following (number type) icons

appear in the display:

Mobile

Note: If the call was incoming and Caller ID information was unavailable,
then the Save option is also unavailable.

After you press

To save the number as other than the first Mobile number,
press the button (

Once you’ve finished a call, you can save the number of the
caller to your Contacts list.

1.

Select Add New Contacts. The New Contact screen appears

Home

Work

Fax

to end your call, the call time,

length of call, phone number, and name of the other party
(if available) appear in the display.
2.

5.

Select the number type that matches your new entry. The

Press the Add To Contacts soft key. The Add To Contacts

New Contact screen appears in the display with the

screen appears in the display showing the following

number being save populating the selected number type

options:

field. (For more information on creating a new Contacts

• Add New Contacts — Lets you create a new Contacts entry.

entry, see “Using the Contacts Add Option” on page 36.)
Understanding Your Contacts

38

Adding the number to an existing Contacts entry:
6.

9.

Select Update Existing. The

Contact screen appears in the display.

Contacts screen appears in

7.

10. Make any added changes you wish to the Contacts entry.

the display showing your

(For more information, refer to “Editing an Existing Contact

current Contacts list.

Entry” on page 42.)

Select the Search field and

11. To save the Contacts entry, press the Save soft key.

enter the first few characters

Storing Number from a Calls Log

of the Contacts entry name

You can store numbers from the Calls logs to your Contacts.

under which you will store the

1.

saved number. (For more

calls.

Contacts entry, see “Using
2.

the Contacts Add Option” on page 36.)
Select the desired Contacts entry. The following (number
type) icons appear in the Update Existing screen:

Mobile
Fax

39

In standby mode, press the Menu soft key, then select
Calls. The Calls list appears in the display showing All

information on finding a

8.

Select the appropriate unassigned number type. The

Home

Work

Select the Down arrow in the upper right corner of the
screen. The following Calls log options appear in a dropdown menu:

• All
• Incoming
• Outgoing
• Missed
• Data
3. Select the Calls log that you wish to review.

4.

Select the number you wish to store in your Contacts list.

“Say a Command” appears in the display and is

The associated Call Information screen appears in the

pronounced through the speaker.

display.
5.

2.

Say “Lookup”.

3.

Speak clearly and say the full name of the person you want

Press the Add To Contacts soft key. The Add To Contacts

VoiceSignal prompts you to “Say the name or #.”

screen appears in the display showing the following
options:

to call, exactly as it is entered in your contact list.

• Add New Contacts — Lets you create a new Contacts entry.
• Update Existing — Lets you add the selected number to an
existing Contacts entry.
For more information on saving the number, see “Saving a
Number from a Call” on page 38.

Finding a Contacts Entry

• If VoiceSignal recognizes the name you said, the contact
information for that name appears in the display.
• If VoiceSignal does not recognize the name you said, a choice list of
up to three names appears in the display, and VoiceSignal prompts
you with “Did you say?” followed by the first name on the list.
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from

Voice Method

the list. (For more information, refer to “Confirmation” on

Use the VoiceSignal Contacts command to view contact
information for any named contact stored in your Contacts list by
saying the name.
Note: The Contacts command shows the requested contact information in
the display but does not dial any phone numbers for the contact.

page 110.)
• To say the name again, press the Repeat soft key.
• To exit VoiceSignal without dialing, press
.
5. The contact information for the name you selected appears
in the display.

To look up information for a specific contact:
1.

In standby mode, press the Voice Recognition key (

).
Understanding Your Contacts

40

Keypad Methods
Find by Name

If you have stored a named contact in your Contacts list, Find lets
you locate the entry quickly.
1.

2.

In standby mode, press the Contacts soft key. The Contacts

Group

This option lets you find a Contacts
list entry with a specific Group
name.
1.

In standby mode, press the

screen appears in the display with an alphabetical list of

Contacts soft key. The Contacts

Contacts showing.

screen appears in the display
with an alphabetical list of

Select the Search field and enter the first few characters of

Contacts showing.

the name of the contact as it appears in your Contacts list.
2.
Example: If you saved a contact name as “Amy Smith”, begin your search for
that contact by pressing
for “A”.

Press the Down arrow button
at the top right corner of the
screen.

Note: As you enter letters, the entry names of the closest matches (thus far)
appear in the display.

3.

When the desired Contacts entry is listed in the display, do

4.

3.

Groups screen appears in the display.

one of the following
• To dial the number associated with the named Contact, press
.
• To change the information about the Contact, select the Contact
entry and press the Edit soft key.

41

Select the Groups option. The
Select the group you wish to browse. The selected Group
list appears in the display.

5.

Do one of the following:
• To add an existing contact entry to the Group, press the Add
Member soft key.
• To delete a contact from the Group, press the Remove member
soft key. (Does not apply to the General group.)

• To rename the Group, press the Rename soft key.
• To remove this Group and return all its members to the General
group, press the Erase soft key.
• To send a text or picture message to selected Contact(s) in the
current Group, press
.
6. Select the desired option to enter that option’s sub-menu.

Editing an Existing Contact Entry
Once stored in the Contacts, an entry can be changed quite
easily.
1.

Find the desired entry in the Contacts list. (For more
information, refer to “Finding a Contacts Entry” on
page 40.)

2.

Press the Edit soft key. The Edit Contact screen appears in

3.

Highlight a number stored in this contact entry.

4.

To backspace and delete numbers, press

5.

To clear all numbers in the highlighted field, press and hold

the display with the contact name highlighted.

6.

When you’re finished editing the entry, press the Save soft
key. Your changes are saved and a confirmation message
appears in the display.

Adding Pauses to Contacts Numbers
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
• P pause — A hard pause stops the calling sequence until further input
from you.
• T pause — A two-second pause stops the calling sequence for two
seconds and then automatically sends the remaining digits.
Tip: You can enter multiple two-second pauses to extend the length of a
pause. For example, two consecutive two-second pauses cause a total
pause time of four seconds.

.

.
Note: You can also add numbers (such as a second Mobile number or a Fax
number) to the entry, assign it to a Group, and add other information.

Note: Keep in mind that pauses count as digits towards the 32-digit
maximum.

Store Pauses in a New Contacts Entry
1.

In standby mode, enter the number you wish to store (such
as your bank’s teleservice number).
Understanding Your Contacts

42

2.

Press the Add Pause soft key.
The following menu options pop-up in the display:

• P pause — Adds a hard pause (awaits input from you).
• T pause — Adds a two-second pause.
3. Select the pause option of your choice to enter it into your
4.

• P pause — Adds a hard pause (awaits input from you).
• T pause — Adds a two-second pause.
6. Select the pause option of your choice to enter it into your
number sequence.

number sequence.

7.

Press the Done soft key.

When you’re finished entering the number and pauses,

8.

When you’re finished entering pauses, press the Save soft

press the Save soft key to store the number in your

key to save your changes to the number in your Contacts

Contacts.

list.

Add Pauses to an Existing Contacts Entry
1.

The following menu options pop-up in the display:

Find the desired entry in the Contacts list. (For more

Add a Number or Email Address to an Existing Entry
1.

information, refer to “Finding a Contacts Entry” on

information, refer to “Finding a Contacts Entry” on

page 40.)
2.

Press the Edit soft key. The Edit Contact screen appears in

page 40.)
2.

Press the Edit soft key. The Edit Contact screen appears in

3.

Highlight a number field or the Email field in this Contacts

the display with the contact name highlighted.
3.

Highlight a number stored in this contact entry.

4.

Use the Left and Right navigation keys to place the cursor
where you want to add a pause (usually at the right-hand
end of the number).

5.
43

Press the Add Pause soft key.

Find the desired entry in the Contacts list. (For more

the display with the contact name highlighted.
entry.
4.

Enter the phone number or e-mail address for the new
Contacts entry.

5.

Press the Done soft key to add the number or Email
address to the existing entry.

Edit an Existing Email Address
1.

Find the desired entry in the Contacts list. (For more
information, refer to “Finding a Contacts Entry” on
page 40.)

2.

Press the Edit soft key. The Edit Contact screen appears in
the display with the contact name highlighted.

3.

Highlight the E-mail field (labeled with the @ symbol).

4.

Use the keypad to edit the e-mail address. (For more
information, refer to “Entering Text” on page 49.)

• To insert the @ symbol, press the Symbols soft key and press @.
• To add the domain type to the end of the Email address, press the
Shortcuts soft key, then select the desired domain type (.com, .net,
.org, .gov).
5. Press the Done soft key to enter your changes, then press

Speed Dial Numbers
You can assign and change Speed
Dial numbers for Contacts entries.
Assigning a Speed Dial Number
1.

In standby mode, press the
Dialer soft key, then press the
Favorites button (

). The

Favorites list appears in the
display.

Tip: To scroll the Favorites list, press the Volume key (on the left side of the
phone) Up or Down.

the Save soft key to save them.

Understanding Your Contacts

44

2.

Select a Speed Dial number.
The Contacts screen appears in

3.

Changing Speed Dial Numbers
1.

Dialer soft key, then press the

Find and select a Contact entry.

Favorites button (

(For more information, refer to

Favorites list appears in the

page 40.) A dot appears in the

). The

display.

“Finding a Contacts Entry” on

4.

In standby mode, press the

the display.

2.

Press the Change Order soft

selected Contact’s check

key. The Favorites list changes,

circle.

as shown.

Press the Add soft key. You are

Note: The Voicemail favorite (1) is
deactivated to prevent you changing it.

returned to the Favorites
screen with the newly assigned
Contact showing.

45

Tip: To scroll the Favorites list, press the Volume key (on the left side of the
phone) Up or Down.

3.

Press and drag one or more
Contacts to other Favorites

Removing Speed Dial Numbers
1.

positions.

In standby mode, press the
Dialer soft key, then press the
Favorites button (

). The

Favorites list appears in the
display.
2.

Press the Remove soft key. The
Favorites list changes, as
shown.

4.

Press the Change soft key. The
changed Favorites list appears
in the display.

Note: The Voicemail favorite (1) is
deactivated to prevent you removing it.

Tip: To scroll the Favorites list, press the Volume key (on the left side of the
phone) Up or Down.

Understanding Your Contacts

46

3.

Press the Remove button (

)

for one or more assigned
Favorites.

Renaming a Contacts Group
Use this option to rename a Group in your Contacts list.
1.

In standby mode, press the Menu soft key and select
Contacts. The Contacts screen appears in the display with
an alphabetical list of Contacts showing.

2.

Press the Down arrow button at the top right corner of the
screen. The Groups screen appears in the display.

4.

Press the Remove soft key. The
changed Favorites list appears
in the display.

• General
• Family
• Friends
• Colleague
• Business
3. Press the Rename soft key.
4.

Select the Group (other than No Group) that you want to
rename, then press the Rename soft key.

5.

The Rename Group text entry screen appears in the display.
The current name of the selected Group populates the text
field.

6.

Enter a new Group name using the keypad. (For more
information, refer to “Entering Text” on page 49.)

47

7.

Press the Save soft key to save the changed group name.

3.

Deleting a Contacts Entry
1.

appears in the entry’s check box. Repeat this step for all
other Contacts entries you wish to send.

Find the desired entry in the Contacts list. (For more
information, refer to “Finding a Contacts Entry” on

4.

5.

in the display.
Select the Contact to delete by pressing

4.

Press the Erase soft key. You are prompted to confirm the
To erase this contact, press the Yes button.

Sending a Contacts Entry
Use the Send Name Card With Bluetooth option to send one or
more selected Contacts entries to another, compatible phone or
other device over a Bluetooth connection.

2.

Contact entry(ies).
Note: For information on turning off the Bluetooth connection, see
“Bluetooth” on page 113.

Memory Status
Use the Memory sub-menu to view the number of Contacts
entries you have stored, as well as the remaining memory.
1.

In standby mode, press the Contacts soft key. The Contacts
screen appears in the display.

Find the desired entry in the Contacts list. (For more
information, refer to “Finding a Contacts Entry” on

Select the receiving device. Your phone automatically
connects with the other device and sends the selected

.

erasure.

1.

in the display.

Press the Erase soft key, the Select to erase screen appears

3.

5.

When you have marked all the entries you wish to send,
press the Send soft key. The Choose device screen appears

page 40.)
2.

Select Contacts entry you wish to send. A check mark

2.

Press the Down arrow button at the top right corner of the

page 40.)

screen and select More ➔ Memory status. The Memory

Press the Send Name Card soft key. The Select to send

status screen appears in the display, showing the amounts

screen appears in the display.

of memory used and remaining for Contacts entries.
Understanding Your Contacts

48

Section 7: Entering Text
This section details how to select the type of text entry screen
(phone-style touch keypad, QWERTY touch keypad, or divided or
full-screen handwriting recognition panel). This section also
describes how to select the desired text entry mode when using
the phone-style touch keypad or the QWERTY keyboard-style
touch keypad.

Phone-Style (3X4) Touch Keypad

Changing Text Entry Screens
Built-in QWERTY Keypad

Your Delve has a keyboard-style touch keypad, commonly called
QWERTY, this is the default text entry screen for most features
and functions that require you to enter text, numbers, and/or
characters (such as punctuation and polarity signs.)
49

This is the phone-style touch keypad for entering text, numbers,
and/or characters (such as punctuation and polarity signs) that
you can access by doing the following:
1.

From the Phone Touch Keypad screen or from either of the
Handwriting Recognition screens, press the down arrow
button (

) (at the upper right corner of the screen).

The following options appear in the display:
• 3X4 Keypad — Displays the phone-style touch keypad.
• QWERTY — Displays the keyboard-style touch keypad, in
landscape mode.
• Handwriting box — Displays the divided text entry screen with the
handwritten text entry field at the bottom. Recognized text appears
in the upper field.
• Handwriting full screen — Displays the full-screen handwritten
text entry field. Both handwritten text and the recognized text
appear in the same field.
2. Select 3X4 Keypad. The phone-style touch keypad appears
and the display automatically rotates to show information

entry screen by pressing one of the following keys:
3X4 Keypad — 3X4 (phone-style) touch keypad
Handwriting box — Divided handwriting recognition screen
Handwriting full screen — Full-screen handwriting
recognition screen
Handwriting Recognition Screens
Your Delve also can recognize print handwriting. Just print your
text, and Delve translates it to text in a screen font.

in a wider, landscape format.
Using the QWERTY keypad, you can type letters, numbers,
punctuation, and other special characters into text entry fields or
other applications simpler and faster than using the phone-style
keypad.
Note: Your phone’s Browser function requires you to use the QWERTY
keypad. Other functions requiring text entry (such as, Messaging and
Memo Pad) accept text entry from whichever keypad you prefer.

Changing Text Entry Screen Using QWERTY Keypad
䊳

From the QWERTY touch keypad, change to another text
Entering Text

50

Accessing the Divided Handwriting Recognition Screen

Accessing the Full-Screen Handwriting Recognition Screen

The divided Handwriting
Recognition screen offers separate
message text (upper) and dedicated
handwriting (lower) fields.
1.

The full-screen Handwriting
Recognition screen offers an
integrated message text and
handwriting input field.
Entering Text Using Handwriting
Recognition Screens

From the Phone Touch
Keypad screen or from the

1.

full-screen Handwriting

in the handwriting entry field.

down arrow button (

The phone replaces your

) (at

handwriting with printed text.

the upper right corner of the
screen), then select

2.

To enter numbers, press

3.

To enter letters, press

Handwriting box.
2.

Using a stylus, print your text

Recognition screen, press the

From the QWERTY Touch Keypad screen, press

then print numbers.
.

then print words.

Note: The only punctuation handwriting recognition accepts is a period.

4.

To enter a space, press

5.

To move to a new line, press

.

6.

To delete text, press

7.

When you are finished writing your text, press the Done

.

soft key to save your writing.
51

.

8.

To correct any handwriting recognition errors, press the
down arrow (at the upper right corner of the screen), then
select 3X4 Keypad or QWERTY.

Changing the Text Entry Mode
Text messages can be made up of alphabetical characters,
numbers, and symbols. You can use the following text entry
modes to simplify text entry:
• Abc — Enter letters, numbers, and symbols by repeatedly pressing
each phone key until the desired character (as shown on the key)
appears in the display or by using the QWERTY keypad. ABC mode
letter options are:
– Abc — Enter initial capital letters (indicated by
on keys)
– ABC — Enter all upper case letters (indicated by
or
on
keys)
– abc — Enter all lower case letters (indicated by
or
on
keys)
Note: T9 Word does not support the QWERTY keypad or Handwriting
Recognition screens, which do not need this function.

• T9 Word — Press each phone key only once to enter the letter of the

word that you’re spelling. T9 WORD mode letter options are:
on keys)
on keys)
on keys)

– T9 Word — Enter initial capital letters (indicated by
– T9 WORD — Enter all upper case letters (indicated by
– T9 word — Enter all lower case letters (indicated by

• 123 — Enter numbers by pressing the corresponding keys on the
phone keypad or the QWERTY keypad (indicated by
or
on
keys).
Tip: Using the QWERTY keypad or the Handwriting Recognition screens, also
use 123 mode to enter numbers and symbols into your message simply
by pressing the keys labeled with the symbols you want.

• Symbols — Using the phone keypad, enter a symbol into your

message by pressing the key labeled with the desired symbol
(indicated by
or
on keys).
The current text entry mode (T9 Word, abc, Abc, ABC, 123, or
Symbols) is indicated on the touch keys. To change the text
entry mode, do the following:
Changing 3X4 Keypad Text Entry Mode
1.

While composing a text message or memo, press the Entry
Mode soft key.
The following options appear in the display:
•
•
•
•
•

Abc
abc
ABC
T9Word
T9word
Entering Text

52

• T9WORD
• 123
2. Select the desired text entry mode.
3.

To change to Symbols mode, press the Symbols soft key.

Changing QWERTY Keypad Text Entry Mode
䊳

While composing a text message or memo, to change text

䊳

While composing a text message, press the Left soft key,
then select T9Word.

• To select abc mode, press
.
– To toggle between abc and ABC modes, press
.
• To select 123-Symbols mode, press
or
.
– To select additional Symbols mode, press
.

• For practice, enter the word “Samsung” by pressing each of the
following keys only once:

While composing a text message or memo, to change text
entry mode:
• To select Abc mode, press
• To select 123 mode, press

53

T9 Word recognizes commonly used words for the numeric
sequence of key presses and inserts the word into your message.
T9 Word is much faster than the traditional method of text entry
(Abc) and requires only one key press per letter of the word that
you’re spelling.

entry mode:

Changing Handwriting Recognition Screen Text Entry
Mode
䊳

Using T9® Mode (Phone Keypad Only)

.
.

S

A

M

S

U

N

T9 Word recognizes that the most commonly used word for the
numeric sequence you just entered is “Samsung.”

G

– Pause briefly and the displayed letter is accepted and inserted into your
message.
– Press
to enter a space and press
to enter a period.

If more than one word shares the
same numeric sequence, T9 Word
provides the most commonly used
word, any additional words appear
in a scrollable pop-up list, in which
you can select a preferred word.
Note: To enter a space, press
. To
enter a period, press
. These key
functions apply to both T9 Word and
Abc modes. For other symbols, see
“Entering Symbols” on page 54.

• Using the QWERTY keypad, press the key labeled with the desired
letter (such as, press
for “G” and
for “H”).
• Using either Handwriting recognition screen, use a stylus to print
the desired letters.

Entering Numbers
Enter numbers into a text message while in 123 mode.
1.

Using Abc Mode
1.

While composing a text message, do one of the following:

• Using the phone keypad, press the Entry Mode soft key, then
select Abc.
• Using the QWERTY keypad, press
.
• Using either Handwriting recognition screen, press
.
2. Enter letters while in Abc mode by using one of following:
• Using the phone keypad:
– Press the key repeatedly until the desired letter appears in the display
(such as, press
once for “G” and twice for “H”).

While composing a text message, do one of the following:

• Using the phone keypad, press the Entry Mode soft key, then
select 123.
• Using the QWERTY keypad, press
or
.
• Using either Handwriting recognition screen, press
.
2. Enter numbers while in 123 mode by using one of the
following:
• Using the phone keypad or the QWERTY keypad, press the keys
labeled with the desired numbers.
• Using either Handwriting recognition screen, use a stylus to print
the desired numbers.

Entering Symbols
Enter symbols (such as “@” or “%”) into a text message while in
Symbols mode.
Entering Text

54

䊳

While composing a text message, enter symbols by using
one of following keypads:
• Using the phone keypad:
– Press the Symbols soft key. The first of four symbol screens appears in
the display.
– Use the Prev and Next soft keys to page through the other symbols, if
desired.
– Press the key labeled with the symbol that you wish to enter.
– Repeat these steps to insert additional symbols into your message.
• Using the QWERTY keypad:
– Press
and/or
.
– Press the key(s) labeled with the corresponding symbol(s) that you wish
to insert into your message.
• Using either Handwriting recognition screen, the only symbol you
can enter is a period.

55

Section 8: Messaging
This section explains how to create, send, receive, and view
different types of messages. This section also describes the
features and functionality associated with messaging.

Creating and Sending New Messages
This section guides you through procedures for creating and
sending text, picture, and postcards.
Creating and Sending a Text Message
1.

In standby mode, press the
Messages soft key, then
select Create Message ➔ Text
Message. The Text Msg
screen appears in the display
showing the To list.

Tip: You can also access Messages by
pressing the Menu soft key and
selecting Messages.

2.

Address your message by selecting contacts and/or
entering number(s) or e-mail address(es) of message
recipient(s):
• To select a mobile number or e-mail address using your Contacts
list, press the Contacts button. The Contacts screen appears in
the display. For more information, refer to “Finding a Contacts
Entry” on page 40.
Select a Contact entry. A check mark appears in the entry’s check box.
To add the selected Contact to the To list, press the Add soft key. The
Text Msg screen appears in the display showing the populated To list.
• To enter recipient phone number(s) or e-mail address(es), select an
empty To field. The QWERTY touch keypad screen appears in the
display in 123 mode.
– To enter a phone number, press the appropriate keys in the proper
sequence, then press the Done soft key. You are returned to the To list.
– To enter an e-mail address, change the text entry mode from 123 to
Abc and enter the address. (For more information, refer to “Entering
Text” on page 49.) When the address is complete, press the Done
soft key. You are returned to the To list.
• To select members of a Contacts Group as recipients, press the
Group button. The Groups screen appears in the display.
– Select the desired Group. The Contacts screen appears in the display.
Messaging

56

– Select individual Contacts or select Select All. Check marks appear in
the check boxes for the selected Contacts.
– Press the Add soft key. You are returned to the To list.

• To select a phone number from a Recent Call as a recipient, press
the Recent Calls button. The Calls screen appears in the display.
– If desired, press the down arrow button in the upper right corner of the
screen, then select All, Incoming, Outgoing, or Missed calls.
– Select individual calls or select Select All. Check marks appear in the
check boxes for the selected calls.
– Press the Add soft key. You are returned to the To list.
3. When you are finished addressing your message, press the

Note: You can use any of the Delve’s four text entry screens to enter your
message text. (For more information, refer to “Changing Text Entry
Screens” on page 49.)

4.

Enter the text for your message. (For more information,
refer to “Entering Text” on page 49.)

• To use pre-composed text, change from the QWERTY touch keypad
to another text entry screen and press the Add Quick Text soft key.
(For more information, refer to “Changing Text Entry Screens”
on page 49.)
5. When you’re finished composing your message text, press

Next soft key. The QWERTY touch keypad screen appears

the Done soft key. A preview of your message appears in

in the display in lower-case mode.

the display.
6.

If you have finished your text message, you can send it by
pressing the Send soft key.
• Before sending your text message, you can change or add
recipients to your message by pressing the Edit Send To soft key.
• Before sending your text message, you can add media (Graphics,
Animations, or Sounds) to your message by pressing the Add
Media soft key.
• Before sending your text message, you can set message send
options by pressing the More soft key and select Sending Options.
(For more information, refer to “Message Sending Options” on
page 62.)

57

Creating and Sending a Picture Message
1.In standby mode, press the Messages soft key, then select

Create Message ➔ Picture Message. The Picture Msg
screen appears in the display showing the To list.
Tip: You can also access Messages by pressing the Menu soft key and
selecting Messages.

2.

Address your message as you
would a Text message (see
“Creating and Sending a Text
Message” on page 56), with
one addition:

• To send this message to your
Online Album, press the Alltel
Mypics button.
3. When you are finished

5.

Enter the Subject text. (For more information, refer to
“Entering Text” on page 49.)

press the Next soft key. The

• To use pre-composed text, change from the QWERTY touch keypad
to another text entry screen and press the Add Quick Text soft key.
(For more information, refer to “Changing Text Entry Screens”
on page 49.)
6. If desired, repeat steps 4 and 5 for the Text field.

Picture Msg fields screen

7.

addressing your message,

4.

Note: You can use any of the Delve’s four text entry screens to enter your
message text. (For more information, refer to “Changing Text Entry
Screens” on page 49.)

To add a picture to the message, select the Picture field.

appears in the display.

You are prompted to Take a Photo or to add a photo from

If desired, select the Subject field. The QWERTY touch

the My Images folder.

keypad screen appears in lower-case mode.
Messaging

58

• To activate the phone’s camera and take a new picture, select Take
Photo. (For more information, refer to “Camera-Camcorder” on
page 77.) Once you’ve take a photo, press the Send soft key.
• To access your photo gallery, select My Images. With pictures in
the gallery, a list of thumbnail images appears in the display. Select
the desired photo and press the Send soft key.
You are returned to the Picture Msg screen which is
populated with the selected photo in the Picture field.
8.

If desired, you can add a sound file to accompany the

Send Picture Messages in Camera Mode

Picture messages can be sent from your phone’s camera to
recipients with compatible phones or devices. You can even
accompany a picture with a voice memo or preloaded sound file.
Tip: You can send a Picture message to up to ten recipients. Enter each
recipient’s address or phone number in a separate To field of the Picture
Msg screen.

1.

picture by selecting the Sound field.
• To record a sound file to add to this message, select Record New.
(For more information, refer to “Voice Memo” on page 107.)
• To add an existing sound file, select My Sounds, select a preferred
file for a list of available sound files, and press the Send soft key.
You are returned to the Picture Msg screen which is
populated with the selected sound file in the Sound field.
9.

To send your finished message, press the Send soft key.
• Before sending your Picture message, you can set message send
options by pressing the More soft key and select Sending Options.
(For more information, refer to “Message Sending Options” on
page 62.)
• To preview your Picture message as the recipient(s) will see it, press
the Preview soft key.
• To make changes to your message, press the Back soft key.

59

In standby mode, press and hold the Camera key (

).

The camera viewfinder screen appears in the display.
2.

Using the display as a viewfinder, when the image that you
wish to send appears in the display, press the Camera key
(

) to take a picture.

Note: For more information about using the camera feature in your phone,
see “Camera-Camcorder” on page 77.

3.

Press the Send soft key. You are prompted to Send to Alltel
my pics.
• To send your picture to Alltel my pics, press the Yes button.
• To send your picture to other recipients other than Alltel my pics,
press the No button.

If necessary, the Delve resizes your picture for sending,
then the Picture Msg screen appears in the display
4.

1.In standby mode, press the Messages soft key, then select

showing the To list.

Create Message ➔ Video Message. The Video Msg screen

Address your message as you would a Text message (see

appears in the display showing the To list.

“Creating and Sending a Text Message” on page 56), with
one addition:
• To send this message to your Online Album, press the Alltel
Mypics soft key.
5. When you are finished addressing your message, press the
Next soft key. The Picture Msg fields screen appears in the
display with your new picture populating the Picture field.
6.

Creating and Sending a Video Message

To complete and send your message, refer to steps 4 – 11
of “Creating and Sending a Picture Message” on page 58.

Send Postcard Messages in Camera Mode

You can also create Postcard messages using photos taken with
the Delve’s camera.

Tip: You can also access Messages by pressing the Menu soft key and
selecting Messages.

2.

Address your message as you
would a Text message (see
“Creating and Sending a Text
Message” on page 56), with
one addition:

• To send this message to your
Online Album, press the Alltel
Mypics soft key.
3. If desired, select the Subject
field. The QWERTY touch
keypad screen appears in

Note: For more information, refer to “Creating and Sending Postcard
Messages” on page 94.

lower-case mode.
Note: You can use any of the Delve’s four text entry screens to enter your
message text. (For more information, refer to “Changing Text Entry
Screens” on page 49.)

Messaging

60

4.

Enter the Subject text. (For more information, refer to

8.

• To use pre-composed text, change from the QWERTY touch keypad
to another text entry screen and press the Add Quick Text soft key.
(For more information, refer to “Changing Text Entry Screens”
on page 49.)
5. If desired, repeat steps 3 and 4 for the Text field.
6.

To add a video clip to the message, select the Video field.
You are prompted to Take a Video or to add a video clip
from the My Videos folder.
• To activate the phone’s camcorder and record a new video clip,
select Take Video. (For more information, refer to “CameraCamcorder” on page 77.) Once you’ve recorded a video clip,
press the Send soft key.
• To access your photo gallery, select My Videos. With video clips in
the gallery, a list of thumbnail images appears in the display. Select
the desired video clip and press the Send soft key.
You are returned to the Video Msg screen which is
populated with the selected video clip in the Video field.

7.

Before sending your Video message, you can set message
send options by pressing the More soft key and select
Sending Options. (For more information, refer to “Message
Sending Options” on page 62.)

61

To preview your Video message as the recipient(s) will see
it, press the Preview soft key.

“Entering Text” on page 49.)
9.

• To make changes to your message, press the Back soft key.
To send your finished message, press the Send soft key.

Send Video Messages in Camcorder Mode

Video messages can be sent from your phone’s camcorder to
recipients with compatible phones or devices.
Tip: You can send a Video message to up to ten recipients. Enter each
recipient’s address or phone number in a separate To field of the Video
Msg screen.

1.

In standby mode, press and hold the Camera key (

).

The camera viewfinder screen appears in the display.
2.

Press the Mode soft key. The camcorder viewfinder screen
appears in the display.

3.

Press the Recording Mode soft key. Select the Video Msg
option.

Note: For more information about setting camcorder options in your phone,
see “Camcorder Options” on page 88.

4.

Using the display as a viewfinder, when the image that you

9.

wish to send appears in the display, press the Camera key
(

) to record a video. The time counter at the bottom

of the Camcorder viewfinder screen indicates recording
time in seconds.
5.

To end your video clip, press Stop (

).

Note: For more information about using the camcorder feature in your
phone, see “Camera-Camcorder” on page 77.

6.

Press the Send soft key. If necessary, the Delve resizes
your picture for sending, then the Picture Msg screen
appears in the display showing the To list.

7.

Address your message as you would a Text message (see
“Creating and Sending a Text Message” on page 56), with
one addition:

• To send this message to your Online Album, press the Alltel
Mypics soft key.
8. When you are finished addressing your message, press the
Next soft key. The Video Msg fields screen appears in the
display with your new picture populating the Video field.

To complete and send your message, refer to steps 3 – 9
of “Creating and Sending a Video Message” on page 60.

Message Sending Options
You can set priority, validity, and
other options before you send a
message. Which options appear in
the Sending Options list depends on
what type of message you have
composed and what message field
you have highlighted.
1.

After you’ve composed a Text,
Picture, or Video message,
press the More soft key and
select Sending Options. The
following options appear in
the display:
• Priority Level — Lets you assign a High, Normal, or Low (pic/
video messages only) priority to the message.
• Validity Period — Lets you select a Date and Time when this
message will no longer be available to the recipient. When your
selected date and time pass, your message is recalled.
• Enh. Delivery Ack / Delivery Ack — Set to On to be alerted when
your message is received by the addressee.
Messaging

62

• Deferred Delivery Time — Lets you set a Date and Time when
this message will be delivered.
2. Select any desired options and values for those options.
3.

To save your settings, press the OK soft key. You’re
returned to the message creation screen.

Receiving New Messages
When you receive a message in
standby mode, one of the following
occurs:
• If Auto View and Auto Scroll are
both set to On — An alert sounds
Frank
(unless turned off) and the message
text automatically appears in the
display and scrolls slowly to the end of
the message. (For more information,
refer to “Message Settings” on
page 68.)
• If Auto View is set to Off — An alert
sounds (unless turned off) and a New Message notification appears in
the display along with the closed envelope icon (
). The date and
time of the message and the following options also appear in the
display:

– View Now — Opens the message where you have the option to Reply,
Forward, Erase, Add To Contacts, Lock/Unlock, Save Quick Text, Save
Media, or Message Info.
– View Later — Closes the popup and saves the message to your inbox
where you can view it later.

Select the desired option.
Receive Messages in Chat View
When you exchange a series of text
messages with a single Contact or
number, you can view your
incoming messages and your sent
messages as if they were a “chat
session”.
Note: To use Chat View, you must set the
Text Msg View ➔ View Mode setting
to Chat. (For more information, refer
to “Message Settings” on page 68.)

1.

View your incoming text
message(s) in Auto View or
View Now mode. (For more
information, refer to “Receiving New Messages” on
page 63.) The Chat With screen appears in the display.
•

63

indicates an incoming text message.

2.

•
indicates an outgoing text message.
You have the following available options:
• To reply to the latest incoming text message, press the Reply soft
key, and select Text Message.

Note: Only text messages appear in the Chat With screen.

• To view details about the last message in the Chat With screen,
press the View Last Msg. soft key.
• To erase selected or All messages listed in the Chat With screen,
press the Erase soft key.
• To access additional options, press the More soft key:
– Forward — Forward a copy of a selected text message listed in the
Chat With screen.
– Add to Contacts — Adds the originator of an incoming text message
to your Contacts list.
– Lock/Unlock — Blocks/permits deletion of selected or All text
messages listed in the Chat With screen.
– Save Quick Text — Save the message text as a Quick Text entry for
later reuse.
– Message Info — Shows the originator, date and time, priority,
message type, and message size.
Receive Messages While in a Call

• If Auto View and Auto Scroll are both set to On — The message text

automatically appears in the display and scrolls slowly to the end of
the message. (For more information, refer to “Message Settings” on
page 68.)
• A New Message notification appears in the display along with the
closed envelope icon (
). The date and time of the message and
the following options also appear in the display:
– View Now — Opens the message where you have the option to Reply,
Forward, Erase, Add To Contacts, Lock/Unlock, Save Quick Text, Save
Media, or Message Info.
– View Later — Closes the popup and saves the message to your inbox
where you can view it later.
Select the desired option.

Voicemail
Voicemail allows callers to leave voice messages in your voice
mailbox, and lets you review, play, and delete your voice
messages any time you are in your Carrier’s network coverage
area.
Voice Mail Setup
Before callers can leave voice mail messages, you must first set
up your account. For more information, refer to “Setting Up Your
Voicemail” on page 7 and to “Message Settings” on page 68.

When you receive a message while in a call, one of the following
occurs:
Messaging

64

Checking your Voicemail
1.

In standby mode, press the Dialer soft key, then press and
hold

until you’re connected to your Wireless Carrier’s

voicemail system. A recorded message prompts you for a
password.
2.

Enter your password, then follow the recorded prompts, to
listen to your voice message(s), change administrative
options, and so on.

Tip: You can also access your voice mail by selecting an entry in the
Voicemail folder.

Message Folders
Inbox
Received messages of all types (except Voicemail) are stored in
the Inbox.
1.

In standby mode, press the Messages soft key, then select
Inbox, to open the Inbox folder.

2.

To delete one or more messages, press the Erase soft key,
select the message(s) to be deleted, then press the Erase
soft key again.

3.
65

To view a message, select it, then do one of the following:

• To compose and send a message to the sender of the message,
press the Reply soft key, then select the type of message you wish
to compose: Text, Picture, or Video.
• To forward the message to other recipients, press the Forward soft
key.
• To delete one or more messages, press the Erase soft key, select
the message(s) to be deleted, then press the Erase soft key again.
• To access other options, press the More soft key. The following
options appear in the display:
– Add To Contacts — Lets you add the sender’s number or E-mail
address to your Contacts list.
– Lock / Unlock — Blocks or allows erasure of the message.
– Save Quick Text — Saves the message text as a Quick Text entry.
– Message Info — Lets you display status information about a
message.
Select an option to perform the function for that option.
Messages and Lock Mode

Your phone can still receive messages while in Lock Mode. The
time and date of the message appear in the display, but you
cannot access the message until you enter the lock code. (For
more information, refer to “Lock Phone” on page 139.)

Outbox
Your phone stores outgoing messages in the Outbox, regardless
of whether the message was successfully sent to, or received by,
the addressee.
Tip: Verify whether and when a message or e-mail was successfully
received by enabling the Delivery Ack message send option. (For more
information, refer to “Send Picture Messages in Camera Mode” on
page 59.)

1.

In standby mode, press the Messages soft key, then select
Outbox. A list of your outgoing messages appears in the
display.

2.

To delete one or more messages, press the Erase soft key,
select the message(s) to be deleted, then press the Erase

• To access other options, press the More soft key. The following
options appear in the display:
– Add To Contacts — Lets you add the sender’s number or E-mail
address to your Contacts list.
– Lock / Unlock — Blocks or allows erasure of the message.
– Save Quick Text — Saves the message text as a Quick Text entry.
– Message Info — Lets you display status information about a
message.
Select an option to perform the function for that option.
Drafts Folder
Messages in the Drafts folder are those that have been
composed but never sent. You can return to the Drafts folder at
any time to view, edit, or send a draft message.
1.

Drafts. A list of your draft messages appears in the display.

soft key again.
3.

To view a message, select it, then do one of the following
• To re-send a message to the original recipient(s), press the Resend
soft key.
• To forward the message to other recipients, press the Forward soft
key.
• To delete one or more messages, press the Erase soft key, select
the message(s) to be deleted, then press the Erase soft key again.

In standby mode, press the Message soft key, then select

2.

To delete one or more messages, press the Erase soft key,
select the message(s) to be deleted, then press the Erase
soft key again.

3.

To view a message, select it, then do one of the following
• To send a message to the original recipient(s), press the Send soft
key.
• To change the message and/or the recipients, press the Edit soft
key.
Messaging

66

• To delete one or more messages, press the Erase soft key, select
the message(s) to be deleted, then press the Erase soft key again.
• To access other options, press the More soft key. The following
options appear in the display:
– Add To Contacts — Lets you add the sender’s number or E-mail
address to your Contacts list.
– Lock / Unlock — Blocks or allows erasure of the message.
– Save Quick Text — Saves the message text as a Quick Text entry.
– Message Info — Lets you display status information about a
message.
Select an option to perform the function for that option.
Voicemail
New voice messages in your voice mailbox are logged in the
Voicemail folder of the Messages menu. Open the Voicemail
folder to view the Callback # (if available), Urgency, and other
details of new voicemail messages.
1.

In standby mode, press the Message soft key, then select
Voicemail. A Voicemail status screen indicating the number
of new messages in your voice mailbox, their urgency, and
any callback numbers appears in the display.

2.

Press the Call soft key or press

to call your voice

mailbox and listen to your voice messages.

Note: You can also dial your voice mailbox from standby mode by pressing
the Dialer soft key, and then pressing and holding
.

E-Mail
You can use your Delve to access your personal or business email account(s).
1.

In standby mode, press the Messages soft key, then select
E-Mail.

2.

Follow the prompts that appear in the display to setup your
phone to access an E-Mail account.

Erasing Messages
You can erase all of the messages in each/all of your message
folders from one convenient location.
Note: This function erases all messages in a selected message folder or in
all message folders. To delete a single message, from the Messaging
menu, select the message folder where the message to be deleted is
stored, then press the Erase soft key, select the message in the list,
and press the Erase soft key again.

1.

In standby mode, press the Messages soft key, then select
Erase Messages. The following options appear in the
display:
• Inbox — Lets you delete all messages from your Inbox.

67

• Outbox — Lets you delete all messages from your Outbox.
• Drafts — Lets you delete all draft messages from the Drafts folder.
• All Messages — Lets you delete all messages from all message
folders.
• E-Mail — Lets you delete all messages from your E-Mail message
folder(s).
2. Select the folder(s) containing the messages that you wish
to delete. You are prompted to confirm the erasure of all
messages in the folder(s).
3.

To cancel deleting any messages, press the No soft key. To
delete all messages from the selected folder, press the Yes
soft key.

Message Settings
The Message Settings let you customize Delve messaging to suit
your preferences.
1.

In standby mode, press the Messages soft key, then select
Message Settings. The Message Settings screen appears in
the display listing the following options:
• Auto Save/Auto Erase — Lets you set Delve messaging to:
– Automatically save unsent messages to the Outbox folder, to discard
them, or to prompt you to elect to save/discard unsent messages.

– Automatically erase/or prompt you to delete the oldest read messages
after message memory is full and new messages are received.

• Quick Text — Lets you change pre-composed text or compose
text for addition to your outgoing messages.
• Voicemail Number — Lets you update your Voicemail access
number.
• Keypad/Entry Mode — Lets you set the following:
– Default Keypad (3X4 Keypad, QWERTY, Handwriting box, Handwriting
full screen) for entering message text.
– Default text Entry Mode [Abc/abc/ABC (alphabetically), T9 Word, or
123 (numerical)] for composing message text.
• Callback Number — Lets you disable (Off), enable (On), and
update the callback number that can be inserted in outgoing
messages.
• Signature — Lets you disable (Off), enable (On), and update the
text signature that can be inserted in outgoing messages.
• Reminder — Lets you set the message receipt reminder to play
Once, Every 2 Minutes, Every 15 Minutes, or not to play (Off).
• Text Msg View — Lets you set Delve messaging to do the
following:
– Auto View — Set your Delve to Display your incoming text messages
automatically when they’re received or to prompt you whether to view
them now or later.
– View Mode — Set Delve messaging to display incoming text
messages one at a time or to display text messages (outgoing and
incoming) in a Chat-style view.
Messaging

68

• Picture/Video Msg Download — When set to On, your Delve
automatically downloads Picture and Video messages to your Inbox
folder when they are received. When set to Off, you are prompted
to select whether to download the message now or later.
2. Select any desired options and settings for those options.
3.

To save your settings, press the OK soft key. You are
returned to the Message Settings menu.

69

Section 9: E-mail
The E-Mail feature is an integrated messaging application that
lets you send and receive e-mail messages from your personal email account(s) and/or from your business e-mail account.

For additional service
choices, select More...

This section details how to launch the E-Mail feature.

Launching E-Mail
1.

In standby mode, press the
Menu soft key, then select
E-Mail (

).

The E-Mail Setup Wizard
Welcome screen appears in
the display.
2.

To proceed, press (

).

“Receiving data:” appears in
the display, followed by a list
of E-Mail service providers.
3.

To begin setup of access to
your personal or business e-mail account, select the
desired provider.
E-mail

70

Section 10: Alltel Shop
This section explains the Alltel Shop features where users can
download multimedia, applications, games, and check news and
sports.

Finding Applications
With Alltel Shop, you can download
full featured applications over the
air including games, personalized
ring tones, pictures, and more.
䊳

In standby mode, press the
Menu soft key, then select
Alltel Shop. The Alltel Shop
screen appears in the display.
The following options are
available:
• Shop — Lets you locate,
purchase (if needed), and download selected applications.
• Various Applications — Launch the related applications when
selected.
• Settings —
• Help —

71

Changing Your Settings
Use the Settings menu in Auto Shop to manage, move, order
applications, and much more.
1.

At the Alltel Shop menu, select Settings.
The following options appear in the display:

• Order Apps — Download applications over the network.
• Move Apps — Move previously downloaded applications between
available folders.
• Manage Apps — View used and available memory.
• Screen Savers — View downloaded screensavers.
• View Log — View the Auto Shop log, which displays information
about recent activity using Auto Shop.
2. Select the desired option to enter its sub-menu and view or
change settings.
Using On-line Help
The Help sub-menu within Alltel Shop is a short tutorial on
several Alltel Shop features. View information about charges,
cancelling subscriptions, buying applications, disabling
applications, and more.

1.

At the Alltel Shop menu, select Help. The available Help
subjects appear in the display.

2.

To view the Help information, select the desired Help
subject.

Alltel Shop

72

Section 11: Alltel Web
This section outlines how to launch Alltel Web, how to navigate to
other pages on the web, and how the keys on the keypad are
used with the web application. Additionally, links to other sites
are briefly discussed.

The Alltel Web screen appears in the display in landscape
mode. A list of categories (each representing one or more
web sites) appears in the display.

Browser Features
With Alltel Web, you can conveniently surf the web and download
ringtones and wallpapers using your phone. Each time you
launch Alltel Web, your phone connects to the Internet and the
service indicator icon with a red arrow (
) appears in the
display.
Stored Web Content
Alltel Web ends an Internet connection after a certain period of
inactivity, however some information from your session remains
stored in the phone (if you leave your phone turned on). You can
access this information without reconnecting to the Internet.
However, if you are viewing stored information, and you select a
link to a site that was not accessed in your last session, you
automatically re-connect to the Internet.

Launching Browser
1.

In standby mode, press the Menu soft key, then select Alltel
Web.

73

2.

Select the desired category, to enter the category list.

Exit Browser
䊳

To exit Alltel Web, press

.

Using Browser
Alltel Web presents on-screen items in any of the following ways:
• Text or numeric input.
Note: When entering text in a web page field, Alltel Web limits you to using
the QWERTY touch keypad.

• Links (embedded in content).

Zoom — Lets you enlarge or shrink web pages.

• Numbered options (some may not be numbered).
• Simple text.

You can act upon options or links by selecting them.

Using Links
Links have several purposes, such as jumping to a different
page, to a different site, or even initiating a phone call. Links are
shown inside of brackets ([ ]). You can normally select a link.

How Alltel Web Buttons Work
The top and right side of the Alltel Web screen contain control bars.
The following table lists Alltel Web buttons that appear in the control
bars and their functions and the
key.

Favorites — Displays and lets you select from a list
of web sites you have saved as your favorites.
Add to Favorites — Lets you save the address and
title of the current web page to your favorites list.
Slide — Lets you press and slide the current web
page to view undisplayed portions of the page.
Settings — Launches the Browser Settings menu,
letting you customize Browser to suit your needs.
Press to exit the Browser and return the phone to
standby mode.

Back — Displays the previously viewed web page,
if any.
Forward — Displays the previously viewed web
page, if any.
Refresh — Reloads and displays the current web
page.
Home — Loads and displays the web page
designated as your “home page”.

Alltel Web

74

Section 12: Alltel TV on Demand
Alltel TV on Demand lets you access video clips of popular TV
shows from both broadcast and cable networks.
This section details how to launch the TV on Demand feature.

Launching TV on Demand
1.

In standby mode, press the
Menu soft key, then select
TV on Demand (

).

The first time you launch TV
on Demand, the following
screens appear in the display:
• Airtime charges message (To
stop this message appearing
each time you launch TV on
Demand, press the Don’t show
this again check box, then press
the Continue soft key.)
• Alltel TV on Demand logo
• Welcome Movie (first time you launch TV on Demand) —
demonstrates the basics of using TV on Demand.
2. To display a list of available video clip folders, press the
Guide soft key.
75

3.

To view a video clip, select the desired folder, then select
the desired video clip.

Section 13: Alltel Navigation
Alltel Navigation lets you find your way to a desired destination
by letting you access maps and by providing voice and on-screen
driving directions.
This section details how to launch the Navigation feature.
Note: To use the Navigation feature, first check that your phone’s Location
option is set to Location On. (For more information, refer to “Location”
on page 129.)

Launching Navigation
1.

In standby mode, press the

3.

4.

the Yes button.
6.

Location On, a Warning screen
appears in the display to
remind you to change your

screen displays, followed by
Select each field to enter your
name and e-mail address.

If you haven’t set your
phone’s Location option to

The Alltel Navigation logo

2.

If you accept the User Agreement, you are prompted to
view a tour of Navigation features. To view the tour, press

).

the Register page.

Read the User Agreement and, if you agree with it, press
the Accept button. Otherwise, press the Decline button.

5.

Menu soft key, then select
Navigation (

Press the Submit button. The Logging in... pop-up appears
in the display, followed by the User Agreement screen.

Location setting.
7.

Press the Continue button.
The Alltel Navigation screen
appears in the display.

Alltel Navigation

76

Section 14: Camera-Camcorder
Use your Samsung phone to take full color digital pictures and
videos, display them on your phone’s vivid color display, and
instantly share them with family and friends. It’s fun, and as easy
to use as a traditional point-and-click camera or camcorder. This
section explains how you can do the following:
• Take pictures and videos with your phone’s built-in digital cameracamcorder.
• Send and receive pictures and videos taken with your phone’s cameracamcorder.
• Set the several options associated with the camera-camcorder that
help you take crisp, clear pictures and videos.

Taking Pictures and Videos
Taking pictures videos with the built-in camera-camcorder is as
simple as choosing a subject, pointing the lens (located on the
rear of your phone, at the top), and pressing a button.

Taking Snap Shots (Single Pictures)

to “Screen Layouts” on page 79)

Note: You can also activate the camera by pressing the Menu soft key, then
select Multimedia ➔ Camera.

2.

Using the display as a viewfinder, point the camera at your
subject.

3.

When the image that you wish to capture appears in the
display, press the Camera key (

).

To take a single picture using the current camera settings, do the
following:

4.

Press the Save button to save the picture to memory.

In standby mode, press and hold the Camera key (

5.

Press the Erase button to erase the photo.

6.

To exit the Camera feature, press

1.

)

on the right side of the phone. The camera view finder
screen appears in the display. (For more information, refer
77

.

Tip: You can change a number of the camera’s settings to suit particular
uses for your pictures. For more information, refer to “Camera Options”
on page 82

• Mosaic — Lets you take a mosaic of 4 or 9 photos.
• Frame — Lets you select a frame to surround your photos.
3. When you select the Multi option, the following options

Taking Multi Shot Pictures

appear in the display:

When taking pictures of moving subjects or subjects you cannot
pose, such as children and pets, the camera’s Multi Shot mode
simplifies the process of taking multiple pictures in quick
succession. After taking Multi Shot pictures, the camera
automatically displays thumbnail views of the pictures you have
just taken so you can select the best picture(s) and discard the
rest.
1.

In standby mode, press and hold the Camera key (

)

•3
•5
When you select Mosaic, the following options appear in
the display:
•4
•9
4. Select the desired number of shots.
The Multi progress bar (

on the right side of the phone. The camera view finder

Note: You can also activate the camera by pressing the Menu soft key, then
select Multimedia ➔ Camera.

Press the Shooting Mode button (

or

)

(which acts as a progress bar while pictures are being

to “Screen Layouts” on page 79)

2.

or

) or the Mosaic icon (

screen appears in the display. (For more information, refer

taken) appears in the display.
5.

your subject.

). The following

options appear in the display:
• Single — Take one photo with each press of the Camera button.
• Multi — Lets you take a series of 3 or 5 photos.

Using the display as a viewfinder, point the camera lens at

6.

Press the Camera key. The camera takes one picture
(Single) or multiple pictures in quick succession (Multi or
Mosaic).
Camera-Camcorder

78

7.

To save the picture(s) to memory, press the Save button.

4.

Press the Save button to save the video to memory.

To discard the pictures, press the Erase button. You are

5.

Press the Erase button to erase the video. You are

prompted to confirm the erasure.

prompted to confirm the erasure.

Screen Layouts

Taking Videos
To take a video using the current camcorder settings, do the
following:
1.

In Camera mode, press the Mode button (

Camera Screen

). The

camcorder view finder screen appears in the display. (For
more information, refer to “Camcorder Screen” on
page 81)
Note: You can also activate the camcorder from standby mode by pressing
the Menu soft key, then selecting Multimedia ➔ Camcorder.

2.

Using the display as a viewfinder, point the camera lens at
your subject.

3.

Press the Camera key when the image that you wish to
capture appears in the display. Recording continues until
one of the following occurs:
• You press Stop (
).
• Available memory is used up (Normal setting).
• 15 seconds of video have been recorded (Video Msg setting).

79

When you activate your phone’s camera, the second line of the
display is reserved for the current camera resolution setting and
the picture counter. The center of the display shows a viewfinder
image of the subject at which the camera is pointed.
Camera Screen Buttons
Changes the Camera-Camcorder mode to Camcorder.

Lets you set the Camera’s Shooting Mode to Single,
Multi, Mosaic, or Frame.
Lets you set the resolution of your photos between
2Megapixels – 0.1Mmegapixels and Picture ID.
Lets you select values for Quality, ISO, White Balance,
Effects, and Exposure metering.
Lets you set Night Shot OFF or ON.

Lets you set a time delay before the Camera takes a
picture.
Lets you set the Camera to brighten or darken your
photos.
Lets you access the My Images folder.
Camera Screen Icons
ISO — Indicates camera exposure index setting.

White Balance — Indicates camera’s white balance
setting. (You can change the camera white balance
setting. (For more information, refer to “White Balance”
on page 85.)
Quality — Indicates camera’s picture quality setting.
[You can change the picture quality setting. (For more
information, refer to “Quality” on page 85.)]
Photo Limit — Indicates the available number of photos
you can take. (Depending on the camera resolution
setting.)
Phone Memory — Indicates photos will be stored in the
phone’s memory.
Card Memory — Indicates photos will be stored on a
microSD Memory Card.
Brightness — Brightens or darkens the image
from 4 to +4.
Shooting Mode (Mosaic) — Takes multiple pictures
manually when you press the Camera key (
). The
number of pictures taken depends upon the Mosaic
setting.
Shooting Mode (Multi) — Takes multiple
pictures when you press the Camera key
(
). The number of pictures taken
depends upon the Multi setting.
Camera-Camcorder

80

Self Timer in use — Delays the camera shutter from 3 to
10 seconds after you press the Camera key (
).
Battery Level — Number black bars indicates level of
charge. When the battery is low, an empty battery icon
flashes and the phone sounds an alert, which indicates
your phone is about to shut down.
Camcorder Screen

Lets you set the Camcorder’s Recording Mode to Normal
or Video Msg.
Lets you set the resolution of your videos between
320x240 and 176x144.
Lets you select values for Quality, White Balance, and
Effects.
Not supported by Camcorder.

Lets you set a time delay before the Camcorder records
a video.

When you activate your phone’s camcorder, the first line of the
display is shows current camcorder setting icons. The center of
the display shows a viewfinder image of the subject at which the
camcorder is pointed.
Camcorder Screen Buttons
Changes the Camera-Camcorder mode to Camera.

81

Lets you set the Camcorder to brighten or darken your
videos.
Lets you access the My Videos folder.
Camcorder Screen Icons
White Balance — Indicates the camcorder’s white
balance setting. (You can change the camcorder white
balance setting. For more information, refer to “White
Balance” on page 90.)

Quality — Indicates camcorder’s video quality setting. (You
can change the video quality setting. For more information,
refer to “Quality” on page 90.)
Phone Memory — Indicates videos will be stored in the
phone’s memory.
Card Memory — Indicates videos will be stored on a
microSD Memory Card.
Memory Available — Indicates the percentage of
memory available for you to store a video.
Battery Level — Number black bars indicates level of
charge. When the battery is low, an empty battery icon
flashes and the phone sounds an alert, which indicates
your phone is about to shut down.
Brightness — Brightens or darkens the image
from 4 to +4.
Self Timer in use — Delays the camcorder from
recording for from 3 to 10 seconds after you press the
Camera key (
).

Saving Pictures and Videos
After you’ve taken a picture or video, you can do any of the
following:
• Save the picture or video by pressing the Save button.

Note: If the Alltel Mypics reminder setting is set to On, you are prompted to
send a copy of your picture or video to your Alltel MyPics folder in a
Picture message. (For more information, refer to “AlltelMypics
reminder” on page 87.)

On your phone, a picture is stored in the My Images folder. A video is
stored in the My Videos folder. These folders are part of the phone’s
memory and/or part of an optional Memory Card devoted to storing,
browsing, and viewing saved pictures and videos. (For more
information, refer to “The Photo Gallery” on page 93)
• Set the picture as wallpaper in the idle screen by press the Set as
Wallpaper button.
• Send the picture or video to someone else by pressing the Send
button.
For a detailed procedure, see “Creating and Sending a Picture
Message” on page 58.
• Discard the picture or video by pressing the Erase soft key.

Camera Options
The Camera Option buttons let you adjust the default camera
settings to suite available lighting, the subject of the photo, or the
purpose of the photo.
View Mode
View Mode lets you quickly add or remove elements of the
Camera viewfinder screen.
Camera-Camcorder

82

䊳

In camera mode with the status icon bar and camera
buttons showing, press the center of the display the
following number of times:
• First press — Icons disappear except for photo/memory counter
and battery level.
• Second press — Camera buttons disappear.
• Third press — Icons and camera buttons reappear.

Zoom

Switches the Camera to Camcorder mode. The Camcorder view
finder screen appears in the display.
Shooting Mode
Shooting Mode lets you select Fun Frames and/or take multiple
pictures in succession when you press the Camera key (
).
1.

In camera mode, press

. The following options pop-

up:

Zoom lets you temporarily enlarge the pictures you take, unless
your Size setting is 2.0m. Increasing the Zoom (2 – 9) enlarges
your pictures or videos (1 is normal).
Note: Zoom is not available if the Size option is set to 2.0m.
䊳

Mode

In camera or camcorder viewfinder screen, use the Up and
Down Volume keys to adjust the Zoom (the screen image
enlarges to show the affects of your changes).
The next time you press the Camera key (

), the camera

takes an enlarged picture according to your selected Zoom

• Single — 1 picture taken when your press the Camera key (
).
• Multi — Off / 3 pictures taken in succession / 5 pictures taken in
succession.
• Mosaic — Off / 4 of the same new picture in a 2-by-2 array / 9 of
the same new picture in a 3-by-3 array.
• Frame — Lets you select a frame for enclosing each new photo.
2. Select the desired option and setting. The related icon
appears in the display.
Note: When the Shooting Mode option is set to a value other than Single,
either a Multi shot progress bar (
) or a Mosaic shot icon
(
) appears in the viewfinder screen.

setting.
When you press the Camera key (

), the camera takes

several pictures in rapid succession (Multi and Mosaic).
83

Size
Change the size (in bytes) of your pictures using the Size setting.
1.

In camera mode, press

Self Timer

•
•
•
•
•
•

2Megapixels (1600x1200 pixels)
1.3Megapixels (1280x960 pixels)
0.8Megapixels (1024x768 pixels)
0.3Megapixels (640 X 480 pixels)
0.1Megapixels (320x240 pixels)
Picture ID — lets you take pictures the correct size and resolution
for Contacts list picture IDs.
2. Select the desired option. You’re returned to the camera
viewfinder screen.
Note: The Size setting affects zoom capabilities. When Size is set to 2.0M
(1600 X 1200), zoom is not available. When Size is set to any value
lower than 2.0M (1600 X 1200), zoom settings 1 – 9 are available.

1.

In camera mode, press

. The following options pop-

up:
• Off
• 3 seconds
• 5 seconds
• 10 seconds
2. Select the desired Self Timer option. If you select 3, 5, or
10, the Self Timer icon appears in the camera screen in the
display.
), the countdown

timer indicates the time remaining before the camera

Night Shot lets you take pictures in low light conditions.
in the display:

Self Timer lets you delay taking a picture long enough to let you
join others in a picture.

When you press the Camera key (

Night Shot
In camera mode, press

• On
Select the Night Shot setting of your choice. You’re
returned to the camera viewfinder screen.

. The following options pop-

up:

1.

2.

takes the picture.

. The following options appear
Tip: To stop the countdown timer without resetting it, press

.

• Off
Camera-Camcorder

84

Brightness
Brightness lets you temporarily lighten the pictures you take.
Increasing the Brightness (-4 – +4) lightens your pictures (0 is
normal).
1.

In camera mode, press

. The Brightness adjustment

appears in the display.
2.

. To darken your

. (The screen image lightens or

darkens to show the affects of your changes).
The next time you press the Camera key (

), the

camera takes a lighter or darker picture according to your
selected Brightness setting.

Camera Settings — Camera Tab
When you change a setting, your change is retained until you
change that setting or reset all your camera settings.
Quality
You can affect how much your video is compressed, thereby
reducing it’s overall size (not to be confused with resolution).
1.

In camera mode, press (

), then select Camera Tab ➔

Quality. The following options appear in the display:
85

the camera viewfinder screen.
ISO

To brighten your next picture(s), press
next picture(s), press

• High
• Normal
• Economy
2. Select the quality setting of your choice. You’re returned to

ISO lets you set your camera’s exposure index.
1.

In camera mode, press (

), then select Camera Tab ➔

ISO. The options are:
• Auto
• 100
• 200
• 400
2. Select the ISO setting of your choice. You’re returned to the
camera viewfinder screen.
White Balance
White Balance allows you to adjust video quality according to
available light.

1.

In camera mode, press (

), then select Camera Tab ➔

White Balance. The name of the current White Balance
setting appears in the second line of the display. The
options are:
• Auto — The camera automatically adjusts color balance to
available light.
• Daylight — Use this setting when taking photos in full sun.
• Cloudy — Use this setting when taking photos in cloudy
conditions.
• Tungsten — Use this setting when taking photos under
incandescent lights.
• Fluorescent — Use this setting when taking photos under
fluorescent lights.
2. Press the various White Balances to highlight them and to
show the effects they have on a photo.
3.

When you have highlighted the White Balance you wish to
use, press the OK button. The camera viewfinder screen
appears in the display with your selected White Balance

Change the look of your pictures with Effects. Choose from six
available settings such as Green, Negative, and Sepia. The
selected color effect previews in the display before you take the
picture.
1.

In camera mode, press (

), then select Camera Tab ➔

Effects. The following options pop-up:
Note: Choose Normal to disable Color Effects.

• Normal — Subjects and pictures appear with a normal hue.
• Green — Subjects and pictures appear in a greenish hue.
• Negative — Subjects and pictures appear in inverted colors.
• Sepia — Subjects and pictures appear in a brownish-gray hue.
• B & W — Subjects and pictures appear in black and white.
• Aqua — Subjects and pictures appear in an aqua hue.
2. Select the color effect of your choice, then press the OK
button. You’re returned to the camera viewfinder screen.
When you take your next picture, the phone’s display

applied.
The next time you press the Camera key (

Effects

), the

previews your subject image with the selected color effect.

camera applies the selected White Balance to your photo.

Camera-Camcorder

86

Exposure metering
1.

In camera mode, press (

), then select Camera Tab ➔

Exposure metering. The following options appear in the

• Card Memory — Stores pictures on an optional microSD Memory
Card.
2. Select the memory location setting of your choice, then
press the OK button. You’re returned to the camera

display:
• Normal — Adjusts exposure to the average light level over a large
picture area.
• Center-weighted — Adjusts exposure to the average light level
over a center portion of the subject.
• Spot — Adjusts exposure to the light level over a small portion of
the subject.
2. Select the Metering setting of your choice, then press the
OK button. You’re returned to the camera viewfinder

viewfinder screen.
Auto Save
1.

• Off
• On
2. Select the automatic save setting of your choice, then
press the OK button. You’re returned to the camera
viewfinder screen.

When you take your next picture, the phone’s display
previews your subject image with the measured exposure.

Camera Settings — Common Tab
Default storage
In camera mode, press (

), then select Common Tab ➔

Default storage. The following storage options appear in
the display:
• Phone Memory — Stores pictures in phone memory.
87

), then select Common Tab ➔

Auto Save. The following options appear in the display:

screen.

1.

In camera mode, press (

AlltelMypics reminder
After you take a picture and press the Save button, AlltelMypics
reminder prompts you to send a copy of your picture to your Alltel
Mypics folder.
1.

In camera mode, press (

), then select Common Tab ➔

AlltelMypics reminder. The following options appear in the
display:
• Off

2.

• On
Select the AlltelMypics reminder setting of your choice,
then press the OK button. You’re returned to the camera
viewfinder screen.

Guideline

• Off
• Shutter
• OK
• Melody
2. Select the shutter sound setting of your choice, then press
the OK button. You’re returned to the camera viewfinder

Shows a cross hatch pattern in the view finder screen.
1.

In camera mode, press (

), then select Common Tab ➔

Guideline. The following options appear in the display:
• Off
• On
2. Select the Guideline setting of your choice, then press the
OK button. You’re returned to the camera viewfinder
Shutter Sound

), then select Common Tab ➔

Shutter Sound. The following shutter sounds appear in the
display:

The Camcorder Options let you adjust the default camcorder
settings to suite available lighting, the subject of the video, or the
purpose of the video.
View Mode

䊳

Choose from four different sounds whenever you take a picture.
Aside from being a cool sound effect, Shutter Sounds acts as an
audible reminder that your camera has taken a picture.
In camera mode, press (

Camcorder Options

View Mode lets you quickly add or remove elements of the
Camcorder viewfinder screen.

screen.

1.

screen.

In camcorder mode with the status icon bar and
camcorder buttons showing, press the center of the
display the following number of times:
• First press — Icons disappear except for memory counter and
battery level.
• Second press — Camcorder buttons disappear.
• Third press — Icons and camcorder buttons reappear.
Camera-Camcorder

88

Zoom

Size

Zoom lets you temporarily enlarge the videos you take.
Increasing the Zoom (2 – 9) enlarges your videos (1 is normal).
䊳

In camcorder mode, use the Up and Down Volume keys to

Change the size (in bytes) of your videos by changing the video
resolution setting.
1.

adjust the Zoom (the screen image enlarges to show the
affects of your changes).
The next time you press the Camera key (

), the camera

takes an enlarged picture according to your selected Zoom

options pop-up:
• 320 x 240 (pixels)
• 176 x 144 (pixels)
2. Select the desired option, then press the OK button. You’re
returned to the camcorder viewfinder screen.

setting.
Mode
Switches the Camcorder to Camera mode. The Camera view
finder screen appears in the display.
Recording Mode
1.

In camcorder mode, press the Recording Mode button. The
following options appear in the display:

• Normal — Record videos that are any length up, depending on
available memory.
• Video Msg — Record videos that are a maximum of 15 seconds
long. The videos can be included in video messages.
2. Select the desired recording mode setting. The camcorder
viewfinder screen appears in the display.
89

In camcorder mode, press the Size button. The following

Note: The Size setting is affected by the Recording Mode setting. When
Recording Mode is set to Video Msg, the Size setting is locked at 176 x
144.

Self Timer
Self Timer lets you delay taking a video long enough to let you
join others in the video.
1.

In camcorder mode, press the Self Timer button. The
following options appear in the display:
•
•
•
•

Off
3 seconds
5 seconds
10 seconds

2.

Select the desired delay. The camcorder viewfinder screen

Settings — Camcorder Tab

appears in the display.

Quality

The next time you the Camera key (

), a countdown

timer in the display indicates the time remaining before the
camcorder starts recording the video.

You can affect how much your video is compressed, thereby
reducing it’s overall size (not to be confused with the Size
setting).
1.

Tip: To stop the countdown timer without resetting it, press

.

Camcorder Tab ➔ Quality. The following options appear in
the display:

Brightness
Brightness lets you temporarily lighten the videos you take.
Increasing the Brightness (-4 – +4) lightens your videos (0 is
normal).
1.

In camcorder mode, press the Settings button, then select

In camcorder mode, press

. The Brightness

• High
• Normal
• Economy
2. Select the quality setting of your choice, then press the OK
button. You’re returned to the camcorder viewfinder

adjustment appears in the display.

screen.
2.

To brighten your next video(s), press
next video(s), press

. To darken your

. (The screen image lightens or

darkens to show the affects of your changes).
The next time you press the Camera key (

White Balance
), the

camcorder records a lighter or darker video according to
your selected Brightness setting.

Note: The Quality is affected by the Recording Mode setting. When Recording
Mode is set to Video Msg, the Quality setting is locked at Economy.

White Balance allows you to adjust video quality according to
available light.
1.

In camcorder mode, press the Settings button, then select
Camcorder Tab ➔ White Balance.
Camera-Camcorder

90

Camcorder Tab ➔ Effects. The following options appear in

The options are:
• Auto — The camcorder automatically adjusts color balance to
available light.
• Daylight — Use this setting when recording videos in full sun.
• Cloudy — Use this setting when recording videos in cloudy
conditions.
• Tungsten — Use this setting when recording videos under
incandescent lights.
• Fluorescent — Use this setting when recording videos under
fluorescent lights.
2. Select the White Balance you wish to use, then press the
OK button. The camcorder viewfinder screen appears in

the display.
Note: Choose Normal to disable Color Effects.

• Normal — Subjects and pictures appear with a normal hue.
• Green — Subjects and pictures appear in a greenish hue.
• Negative — Subjects and pictures appear in inverted colors.
• Sepia — Subjects and pictures appear in a brownish-gray hue.
• B & W — Subjects and pictures appear in black and white.
• Aqua — Subjects and pictures appear in an aqua hue.
2. Select the color effect of your choice, then press the OK

the display with your selected White Balance applied.

button. You’re returned to the camcorder viewfinder

The next time you press the Camera key (

screen.

), the

camcorder applies the selected White Balance to your

When you record your next video, the phone’s display

video.
Effects
Change the look of your videos with Color Effects. Choose from
six available settings such as Green, Negative, and Sepia. The
selected color effect previews in the display before you take the
picture.
1.

In camcorder mode, press the Settings button, then select

previews your subject image with the selected color effect.

Camcorder Settings — Common Tab
Default storage
1.

In camcorder mode, press the Settings button, then select
Common Tab ➔ Default storage. The following Memory
options appear in the display:
• Phone Memory — Stores videos in phone memory.

91

• Card Memory — Stores videos on an optional microSD Memory
Card.
2. Select the memory location setting of your choice, then

2.

then press the OK button. You’re returned to the camcorder

press the OK button. You’re returned to the camcorder
viewfinder screen.

In camcorder mode, press the Settings button, then select
Common Tab ➔ Auto Save. The following options appear in
the display:

• Off
• On
2. Select the automatic save setting of your choice. You’re
returned to the camcorder viewfinder screen.
AlltelMypics reminder
After you record a video and press the Save button, AlltelMypics
reminder prompts you to send a copy of your video to your Alltel
Mypics folder.
1.

In camcorder mode, press (

viewfinder screen.
Start Sound

Auto Save
1.

• On
Select the AlltelMypics reminder setting of your choice,

), then select Common Tab

Choose from two different sounds whenever you begin video
recording. Aside from being a cool sound effect, Start Sound acts
as an audible reminder that your camcorder has begun recording
a video.
1.

In camcorder mode, press the Settings button, then select
Common Tab ➔ Start Sound. The following Memory
options appear in the display:

• Off
• Beep
• Look here
• 1,2,3!
2. Select the desired start sound, then press the OK button.
You’re returned to the camcorder viewfinder screen.

➔ AlltelMypics reminder. The following options appear in

the display:
• Off
Camera-Camcorder

92

End Sound
Choose from two different sounds whenever you stop video
recording. Aside from being a cool sound effect, End Sound acts
as an audible reminder that your camcorder has stopped
recording a video.
1.

2.

Press and slide to browse pictures in the gallery.

3.

To send the currently displayed or highlighted picture as a
Picture message, press the Send soft key.

4.

Common Tab ➔ End Sound. The following Memory options

5.

You’re returned to the camcorder viewfinder screen.

The Photo Gallery
Saved pictures are stored in the My Images folder. You can
browse the pictures one at a time (expanded mode), or view
several pictures at once in thumbnail format.
1.

In the Camera viewfinder screen, press the Gallery button.
Any pictures that you’ve saved are listed with their
thumbnail images in the display.

93

To delete selected unlocked pictures from the My Images
folder, press the Erase soft key. Locked pictures must be

appear in the display:
• Off
• Beep
• OK
• Melody
2. Select the desired end sound, then press the OK button.

To buy and download images from the Internet, press the
Buy Images soft key.

In camcorder mode, press the Settings button, then select

unlocked before you can erase them.
6.

For more options, press the More soft key. The following
additional options pop-up:
• Camera — Launches the camera.
• Postcard — Lets you overlay a selected image with drawing(s) or
handwriting, then save the new postcard and send it in a Picture
message. (For more information, refer to “Creating and
Sending Postcard Messages” on page 94.)
• Move — Relocate the currently displayed or highlighted picture
from phone memory to a Memory Card or from a Memory Card to
phone memory.
• Copy — Copy one or more images from phone memory to card
memory or from card memory to phone memory.
• Lock/Unlock — Prevent/allow erasure of one or more images.

– Lock / Unlock — Lock the currently displayed or highlighted picture
so that it cannot be deleted, or unlock the picture so that it can be
deleted.
– Print — Print the image on a Bluetooth-compatible printer.
– Slide Show — Show the images as a full screen slide show.
– Image Info — View the Title, time and date created, size, and
resolution of the currently highlighted or displayed picture.

• Print — Print one or more images on a Bluetooth-compatible
printer.
7. To view an image, select it. While viewing an image, you
have the following options:
•
•
•
•
•
•

To magnify the image, press
.
To create a Postcard, press
.
To expand the image to fill the display, press
.
To send the image in a Picture message, press the Send soft key.
To buy and download images, press the Buy Images soft key.
To assign the image as the standby screen Wallpaper or as a
Picture ID for someone in your Contacts list, press the Set As soft
key.
• To access more options, press the More soft key. The following
additional options pop-up:
– Camera — Launches the camera.
– Erase — Deletes the image from the My Images folder, provided the
image is unlocked.
– Move to card / phone — Relocate the currently displayed or
highlighted picture from phone memory to a Memory Card or from a
Memory Card to phone memory.
– Copy to card / phone — Copy one or more images from phone
memory to card memory or from card memory to phone memory.
– Rename — Rename the currently displayed or highlighted picture.

8.

Select the desired option to perform its function or to enter
its sub-menu.

Creating and Sending Postcard Messages
Postcard lets you quickly send photos overlaid with handwritten
messages as Picture messages, rather than using the keypad to
enter your message. You can also include a sound file and
keypad-entered text.
1.

In the Camera viewfinder screen, press the Gallery button.
Any pictures that you’ve saved are listed with their
thumbnail images in the display.

2.

Select the desired picture, then press the Postcard button.
– Or –
Press the More soft key, then select Postcard, select the
desired picture, and press the Postcard soft key.

Camera-Camcorder

94

You are prompted to save your postcard as an Image (JPG)

Lets you select the line thickness for art or writing
using the Pen drawing tool.

file or as a Flash (SWF) file.
3.

Select the desired file format. The postcard message
Lets you remove selected or all stamps from your
postcard image.

screen appears in the display.

Lets you undo the previous line or letter made
with the Pen or the previous stamp image made
using the Stamp.
Lets you save your changes to your Postcard
image.
4.

Use the following tools to add handwritten text or graphics
to your postcard:
Lets you select the Pen or the Stamp as your
drawing tool.
Lets you select the color for art or writing using
the Pen drawing tool.
Lets you select the pattern for the Stamp drawing
tool.

95

5.

Press

6.

Press the Send soft key, then select Picture Message. The

to save your changes.

Picture Msg screen appears in the display.
7.

Address, compose, and send your Postcard as a Picture
message. (For more information, refer to “Creating and
Sending a Picture Message” on page 58.)

Point, Click, and Send Pictures and Videos
Take a picture or record a video and send it to anyone with a
compatible device in a few easy steps.
1.

In standby mode, press and hold the Camera key (

) on

the right side of the phone. The camera view finder screen
appears in the display.
2.

If desired, press the Mode button. The camcorder view

• With a video clip, a menu pops-up offering you the following
options:
– Video Message
– To alltel my pics
– Via Bluetooth
Select Video Message. The Video Msg screen appears in the display
with the To list showing.
6. Enter the recipient’s phone number or e-mail address
using the keypad.

finder screen appears in the display.
3.

Using the display as a viewfinder, take the desired picture

7.

Press the Done soft key to save the address(es).

or record the desired video by pressing the Camera key

8.

Press the Next soft key. Select other message fields as

(

), and then pressing the Stop button (

) to stop

needed. (For more information, refer to “Creating and

video recording.
The photo/video review screen appears in the display.
4.

Sending New Messages” on page 56.)
9.

When you are finished composing your message, press

For a video clip, press the Save button. The camcorder

Send soft key to send the Picture or Video message to the

view finder screen appears in the display. Next, press the

intended recipient(s).

Gallery button; then, if desired, select the new video clip.
5.

Press the Send button:
• With a photo, you are prompted to send the photo to Alltel my pic.
Select the preferred option. The Picture Msg screen appears in the
display with the To list showing.
Camera-Camcorder

96

Section 15: Music Player
Music Player lets you play music files (such as, CMX, MIDI, MP3,
AAC, AAC+, and eAAC+) stored on a microSD™ Memory Card
(up to 8 GB).

Music Player Controls
1.

Launches the
Music Library
menu.

This section describes your phone’s Music Player functions and
key features associated with multimedia.

Accessing the Music Player
2.
Note: A microSD™ Memory Card must be
installed for the Music Player to
launch. (For more information, refer
to “Memory Card (Optional)” on
page 8.)
䊳

cover image, selection
title/file name, artist, and
album name, if available.
3.

Equalization and
Repetition controls — Set the equalization (Normal, Rock,

Multimedia ➔ Music Player.
The Music Player screen

Jazz, or Classic – only active when you use a headset),

appears in the display.

repetition, and shuffle.
4.

97

Selection Information
area — Shows album

In standby mode, press the
Menu soft key, then select

Music Library button

Progress bar — Indicates progress of playback.

5.

Elapsed Time and Total Time — Show how many hours,
minutes, and seconds of the music file have been played
and shows how long the music file is in hours, minutes,

6.

Browsing for a Music File to Play
To select a music file to play:
1.

From the Music Player screen,

and seconds.

press the Music Library

Playback controls

button (

) in the upper

left corner of the screen.

Adjusts playback volume.

The Music Library screen
appears in the display listing

Changes playback to previous music file in
playback list.
Starts/resumes music file playback.
Pauses music file playback.
Changes playback to next music file in playback
list.
Music Player Soft Keys
• Details — Launches the Details screen which shows Title, Artists

names, Album title, Genre, File Name, and Encoding Format for the
music file currently playing.
• Minimize — Closes the Music Player screen, but playback continues.

the following options:
• Now playing — Lists all music
files you have selected to play.
• All tracks — Lists all music files stored in the My Music folder on a
microSD Memory Card by their file names.
• Playlists — Lists any music file Playlist(s) you have created.
• Artists — Lists all available recording artists names with music
files stored on a Memory Card.
• Albums — Lists all available album titles for music files stored on a
Memory Card.
2. Select what music file group you wish to access. A list of
music files appears in the display.
3.

To play a music file, select the file. The Music Player screen
appears in the display and the selected file begins playing.
Music Player

98

4.

To add a file to a Playlist, press the Add to Playlist soft key.

3.

The Add to playlists screen appears in the display.
• Select a music file to add to a Playlist. A check mark appears in the
check box for that file.
• Press the Save soft key. The Playlists screen appears in the display.
• Select the Playlist to receive the selected music files. The selected
playlist opens to show the added files.
• Press the Save soft key. The Playlists screen appears in the display.
Searching for a Music File to Play
1.

(

option you chose. (For more information, refer to “Entering
Text” on page 49.)
4.

select a Library option (such
as All Tracks).
Select the 
field. The 3X4 Keypad screen
appears in the display.

Press the Done soft key. A list of the files, Playlists, artists,
or albums with names that match your text entry appears
in the search screen.

5.

Select the file you wish to play. The Music Player screen
appears in the display and the selected file begins playing.

6.

) in the upper left

corner of the screen, then

2.

album you wish to find, depending upon which Library

From the Music Player screen,
press the Library button

Enter the first few characters of the file, Playlist, artist, or

To add a file to a Playlist, press the Add to Playlist soft key.
The Add to Playlist screen appears in the display.

• Select a music file to add to a Playlist. A check mark appears in the
check box for that file.
• Press the Save soft key. The Playlists screen appears in the display.
• Select the Playlist to receive the selected music files. You are
returned to the All Tracks list.
Creating a Playlist
1.

From the Music Player screen, press the Music Library
button (

) in the upper left corner of the screen.

The Music Library screen appears in the display listing the
following options:
99

• Now playing — Lists all music files you have selected to play.
• All tracks — Lists all music files stored in the My Music folder on a
microSD Memory Card by their file names.
• Playlists — Lists any music file
Playlist(s) you have created.
• Artists — Lists all available
recording artists names with
music files stored on a Memory
Card.
• Albums — Lists all available
album titles for music files stored
on a Memory Card.
2. Select Playlist. The Playlists

The Create Playlist screen
appears in the display.
4.

Playlist.
5.

The Playlists screen appears
in the display containing your
new playlist.

6.

Press the down arrow button
in the upper right corner of
the screen, then select a
Library option to select music

screen appears in the display.
3.

Enter a name for your new

to add to your new Playlist.

Press the Create soft key.
7.

Press the Add Songs soft key. The Add Songs screen
appears in the display.

8.

Select a music file to add to a Playlist. A check mark
appears in the check box for that file. Repeat this step as
needed.

9.

Press the Save soft key. The Add to Playlist screen shows a
list of available Playlists.

Music Player

100

10. Select your new Playlist. You are returned to the Library

option screen you previously chose.
11. Press the down arrow button in the upper right corner of

the screen, then select Playlists. A list of available Playlists
appears in the display.
12. Select your new Playlist. Your Playlist screen appears in

the display showing the newly added files.

101

Section 16: Multimedia
This section outlines your phone’s multimedia functions and key
features associated with multimedia.

Accessing Multimedia
1.

In standby mode, press the Menu soft key, then select
Multimedia. The following Multimedia sub-menus appear
in the display:
• Camera — Lets you launch and set up your phone’s camera. (For
more information, refer to “Camera-Camcorder” on page 77.)
• Camcorder — Lets you launch and set up your phone’s
camcorder. (For more information, refer to “CameraCamcorder” on page 77.)
• Music Player — Lets you launch your phone’s Music Player. (For
more information, refer to “Music Player” on page 97.)
• My Images — Lets you choose the multi-media or pictures that
appear in your phone’s display.
• My Videos — Lets you choose the videos that appear in your
phone’s display.
• My Ringtones — Lets you assign melody tones for calls, alarms,
and other alerts.
• My Sounds — Lets you assign melody tones for calls, alarms, and
other alerts.

2.

Select a sub-menu to launch it. The following sections
describe the above listed sub-menus in greater detail.

My Images
The My Images folder stores pictures you have taken with your
phone’s camera and images you have downloaded. My Images
lets you choose a picture or image to do the following:
• Appear in your phone’s display while in standby mode (wallpaper).
• Serve as picture ID for one of your contacts.
• Be sent to another phone as part of a Picture message or over a
Bluetooth connection.
• Serve as the background for a Postcard message.
1.

From the Multimedia menu, select My Images.
If there are no pictures stored in your phone or on a
memory card, “No Image” appears in the My Images
screen.
• To launch the camera to take a picture, press the More soft key and
select the Camera option. (For more information, refer to
“Camera-Camcorder” on page 77.)
• To purchase and download images, press the Buy Images soft key,
which launches Alltel Web. (For more information, refer to “Alltel
Web” on page 73.)
Multimedia

102

If there are pictures stored in your phone or on an optional

– Camera — Launches your phone’s camera, so you can take new
pictures.
– Erase — Deletes one or more selected, unlocked pictures.
– Move to card / phone — Lets you move the picture from the phone
to the memory card or from the memory card to the phone.
– Copy to card / phone — Lets you copy the picture from the phone to
the memory card or from the memory card to the phone.
– Rename — Lets you rename the picture.
– Lock / Unlock — Lets you protect the picture from being deleted.
– Print — Sends a printout of the picture to a Bluetooth-compatible
printer.
– Slide Show — Shows the available images as a sequence of fullscreen pictures.
– Image Info — Displays information about the picture, such as the
picture Name, creation Date and Time, Resolution, and the data
Size.

Memory Card, up to seven thumbnail images of your
pictures appear in the display.
Tip: You can also access My Images from:
-The Camera screen, by selecting the Gallery button.
-The Edit Contact screen, by selecting the picture ID field and then
selecting the My Images option.

2.

Select a picture to enlarge it for easier viewing.

3.

While viewing a picture, the following options are
available:
• Zoom button — Lets you magnify the current image.
• Postcard button — Lets you use the current image to create a
Postcard message. (For more information, refer to “Creating and
Sending Postcard Messages” on page 94.)
• Full screen button — Expands the current image to fill the display.
• Send soft key — Lets you send the selected image to a specified
recipient in a Picture message or to Alltel My Pics, or via Bluetooth.
• Buy Images soft key — Launches the Alltel Web browser, enabling
you to find, purchase (as needed), and download images.
• Set As soft key — Lets you assign the selected picture as the
Picture ID for a Contact or as the Wallpaper for the idle screen.
• More soft key — Lets you access the following additional options:

103

Select the desired option.

My Videos
My Videos lets you take videos, review your videos, send them as
video messages, and assign your videos as wallpaper on your
phone.
1.

From the Multimedia menu, select My Videos.
If there are no videos stored in your phone or on a memory
card, “No Video” appears in the Videos screen.

If there are videos stored in your phone or on an optional

6.

videos appear in the Videos screen.
2.

appears in the display. (For more information, refer to
“Camera-Camcorder” on page 77.)
3.

To play a video, select it. The
Video Player screen appears
in the display and begins
playing the highlighted video.

4.

7.

To take a new video, press the More soft key and select the
Camcorder option. The camcorder view finder screen

To send a video as part of a
video message, press the

• Camcorder — Lets you record a new video clip.
• Copy — Lets you copy a video clip from the phone to the memory
card or from the memory card to the phone.
• Lock / Unlock — Lets you protect a video from being deleted.
8. Select the desired option.
Video Player
Your Delve phone includes a Video Player capable of playing 3gs
and MP4 video files. To launch the Video Player:
1.

begins playing.
2.

To send a video as part of a video message, press the Send
soft key. (For more information, refer to “Creating and

Message” on page 60.)

Sending a Video Message” on page 60.)

To delete one or more video
clips from the My Videos folder, press the Erase soft key.

From the Videos screen, select a video. The Video Player
screen appears in the display and the selected video

information, refer to “Creating

5.

For more My Videos options, press the More soft key. The
following options appear in the display:

Send soft key. (For more
and Sending a Video

To move a video from the phone to a Memory Card or from
a Memory Card to the phone, press the Move soft key.

Memory Card, up to seven thumbnail images from your

3.

To delete one or more video clips from the My Videos
folder, press the Erase soft key.
Multimedia

104

4.

To view the video in the largest size possible for the Delve,

6.

press the Full Screen soft key.

To select another video for playback, press

in the

upper left corner of the screen.

My Ringtones
My Ringtones lets you assign ringtones (preloaded and
downloaded) for calls, alerts, and as distinctive ringers for
Contacts.
1.

From the Multimedia menu, select My Ringtones. A list of
ringtones appears in the display.

5.

For more Video Player options, press the More soft key. The

Tip: You can also access My Ringtones from:

following options appear in the display:

-A Alarm screen by selecting the Alarm Tone option.

• Camcorder — Lets you record a new video clip.
• Move to card — Lets you move the video clip to an optional
Memory Card.
• Copy to card — Lets you save a copy of the video clip to an
optional Memory Card.
• Rename — Lets you change the name of this video clip.
• Lock / Unlock — Lets you protect the video from being deleted.
• Video Info — Displays information about the video, such as the
video Name, creation Date and Time, Resolution, data Size, and
the Duration.

-The Edit Contact screen by selecting the

2.

option.

When accessing My Ringtones from an Alarm or a Contact,
select a particular ringtone. A dot appears in the selected
ringtone’s radio button, and the ringtone begins playing.

• To stop ringtone playback, select the ringtone a second time.
• To assign the highlighted ringtone to the Alarm or Contact, press
the Set as button.
3. When accessing My Ringtones from the Multimedia menu,
assign the highlighted ringtone by pressing the Set As
button. The following options appear in the display:

105

• Ringtone — Lets you assign the selected ringtone to incoming
voice calls.
• Contact ID — Lets you assign the selected ringtone as the
distinctive ringer for a Contact.
• Alert Tone — Lets you assign the selected ringtone to All
Messages, TXT Message, Picture-Video Message, or Voicemail
Message.
4. Select the desired option.
5.

Tip: You can also access My Sounds from:
-A Set Alarm screen by selecting the Alarm Tone option, then pressing
the My Sounds soft key.
-The Edit Contact screen by selecting the
My Sounds soft key.

2.

page 107.)

key and the following options appear in the display:

My Sounds
My Sounds lets you record voice memos and lets you assign
preloaded and downloaded sound files as ringers for calls,
alarms, and other alerts.
1.

From the Multimedia menu, select My Sounds. Record New
and a list of sound files appears in the display.

Press the Record New soft key to record a voice memo.
(For more information, refer to “Voice Memo” on

When using a downloaded ringtone, press the Options soft

• Erase — Erases one or more selected files or All files.
• Lock / Unlock — Lets you prevent/permit file deletion.
• Send Via BT — Sends a copy of the ringtone file to another device
over a Bluetooth connection.
• Ringtone Info — Displays information about the selected file, such
as the file name, the file type, and the data size.
6. Select the desired option.

option and pressing the

3.

Selecting a sound file to hear it played. The Sound Player
screen appears in the display. The following soft keys are
available:
• Record New — Launches the Voice Recorder, allowing you to
record a voice memo.
• Send — Lets you send the selected sound file to a specified
recipient ro device.
– Picture Message — Launches the Picture Msg screen with the
selected sound file populating the Sound field, allowing you to send the
message containing the file to a selected recipient.
– To alltel my pix — Lets you send the selected sound file to an Online
Album on your wireless provider’s server. For details, contact your
wireless provider.
– Via Bluetooth — Lets you send a copy of a selected sound file to
another Bluetooth device over a Bluetooth connection with your Delve.
Multimedia

106

• Set as — Lets you set the selected sound file as a Ringtone, a
Contact ID, or as an Alert Tone.
4. For recorded sound files, access other options by pressing
the More soft key.
• Erase — Erases the selected sound file.
• Rename — Lets you rename the sound file.
• Lock / Unlock — Lets you protect the sound file from being
deleted.
• Sound Info — Displays information about the sound file, such as
the file name, file size, file type, date, and time.
5. Select the desired option.
Voice Memo
You can use your phone to record
voice memos and other sound files
for later playback or assignment as
ringers. (For more information, refer
to “Ringer Type” on page 134.)
Note: The maximum length for a voice
memo in “Limit for Message” mode
is 60 seconds. In “Until Memory Full”
mode, the time limit is determined by
available memory.

107

You can save as many voice memos as will fit in the empty
memory capacity.
Record a Voice Memo
1.

From the Multimedia menu, select My Sounds then press
the Record New soft key. The following options appear in
the display:

• Until Memory Full — Recording continues until you press , or until
all available memory is used.
• Limit for Message — Recording continues for no more than 1
minute.
2. Select the desired option. The Voice Recorder screen
appears in the display.

3.

Press the Record button
(

2.

wish to review to play it. The

As it is recording the phone

Sound Player screen appears

displays a countdown timer

in the display.

that shows the seconds

• To stop the memo playing, press
. Press
to restart playing
the memo.
When the voice memo

remaining for the recording.
• To pause the memo, press the
Pause button. When a memo is
paused, select Resume to
continue recording.
4. Once you’re finished

finishes playing, the selected
voice memo remains
highlighted in the list of sound

recording, press the Stop
button. The new recording is saved, and the My Sounds
screen appears in the display.

files.
Erase One or More Voice Memos
1.

From the Multimedia menu, select My Sounds. A list of

2.

Press the Erase soft key. The Select to erase screen

Review Voice Memos
If you’ve saved any voice memos, you can review them anytime.
1.

Select the voice memo you

), then start speaking.

sound files appears in the display.

From the Multimedia menu, select My Sounds. A list of

appears in the display.

sound files appears in the display.
3.

Select the Voice Memo(s) you want to erase. A check mark
appears in each Voice Memo’s check box.

Multimedia

108

Section 17: Tools
This section explains how to use your phone’s digital assistant
functions to view today’s calendar, schedule events, set
reminders, perform calculations, and more.

Accessing Your Phone’s Tools
To launch the Tools menu:
䊳

In standby mode, press the Menu soft key, then select
Tools (

). The Tools menu appears in the display.

Voice Service
Your Delve includes state-of-the-art voice recognition software
that lets you use your voice to dial numbers, access your
Contacts list, and open Tools. To access your phone’s voice
recognition, do the following:
1.

109

2.

Select the desired sub-menu.

Voice Commands
To access the Voice Commands menu:
1.

In standby mode, press and hold the Voice Recognition key
(

), on the right side of the phone.

– Or –
From the Tools menu, select Voice Service ➔ Voice
Commands.
Tip: You can also set your phone to start VoiceSignal when you connect an
optional headset to the phone. (For more information, refer to “Voice
Launch” on page 112.)

At the Tools menu, select Voice Service. The following

“Say a Command” appears in the display and is

options appear in the display:

pronounced through the earpiece, followed by a list of

• Voice Commands — Lets you place calls, access your Contacts
List, review your appointments, and more by speaking commands
into your phone. (Also see “Using Voice Dial” on page 23 and see
“Voice Method” on page 40 for more information.)
• Voice Settings — Lets you tailor VoiceSignal to better respond to
your voice and your phone use preferences. (For more information,
refer to “Adaptation” on page 111.)

available commands:
• Call — Lets you dial the phone by saying any name stored in your
contact list, without ever having to record, or “train” that name.
VoiceSignal automatically voice-activates all your contacts, even if
you have hundreds of them stored on your phone. You can also dial
any telephone number, even if it is not stored in your contact list, by

saying the digits in the number. (For more information, refer to
“Using Voice Dial” on page 23.)
• Send Text — Lets you access Create Text Message.
• Send Picture — Lets you access Create Picture Message.
• Lookup — Lets you find a Contact by name and review the
Contact’s information.
• Go to — Lets you access the following list of your phone’s features
and functions:
– Messages
– Alltel Shop
– Alltel Web
– Contacts
– Calls
– Multimedia
– Tools
– Settings
– Phone Info
– E-Mail
– TV on Demand
– Navigation
• Check — Lets you say a single command (such as “Status”) to
verify your phone's: Status, Signal Strength, Network, Battery, or
My Phone Number.
2. Speaking clearly, say the command that you want to use.

If VoiceSignal does not recognize a command, it prompts
you to repeat the command.
If VoiceSignal still does not recognized the command, it
tells you “No match found” and offers you the option of
selecting Settings or Repeat before canceling voice
recognition.
Voice Command Tips:
• Make sure you wait for the beep and/or “Listening ...” pop-up before

speaking.
• Speak clearly at a normal volume, as if you were talking on the phone.

Voice Settings
Confirmation

You can select whether and when VoiceSignal asks for
confirmation of your responses when using the Call command.
1.

From the Tools menu, select Voice Service ➔ Voice Settings
➔ Confirmation. The following options appear:

• Automatic — Voice Service asks for your confirmation only when it
is not sure if it has correctly recognized the name or number.
• Always Confirm — Voice Service always asks for your
confirmation.
• Never Confirm — Voice Service never asks for your confirmation.
Tools

110

2.
3.

Select your preferred setting.

• If you make a mistake while recording a phrase, or if there is an

To save your selection, press the OK soft key. To discard
the new setting, press

. You are returned to the

Voice Settings menu.
Adaptation

If you regularly have trouble with Voice Service not recognizing
the commands, names, and/or numbers you say, try adapting
Voice Service to your voice. Adapting can improve the accuracy
of Voice Service responses, especially for people with strong
regional accents.

unexpected noise that spoils the recording, re-record that phrase.
• Only use Adaptation if you are regularly having problems with Voice

Service. Once you adapt Voice Service, it will not work as well for other
people using your phone. (You can always reset Voice Service to its
original state, as described below.)
Adapt Voice
To adapt Voice Signal to your voice, do the following:
1.

From the Tools menu, select Voice Service ➔ Voice Settings
➔ Adaptation. The Adaptation screen appears in the

display showing the Adapt Voice option.
Note: After you adapt Voice Service, it is customized to your voice, and your
voice only. Others will not be able to use your Voice Service on your
phone unless they reset it to factory defaults.

2.

Adaptation involves recording your responses to several
sequences of phrases. The recording process takes a couple of
minutes.

3.

Tips for Adapting Voice Service:
• Use Adaptation in a quiet place.
• Do not use a headset during Adaptation.
• Make sure you wait for the beep before starting to speak.
• Speak clearly, and say each phrase distinctly.
111

Select Adapt Voice. Your phone displays text describing the
Adapt Digits process.
Press the Start soft key. Your phone displays the first
phrase or digit sequence and says “Please say” through
the speaker followed by the phrase or digit sequence
appearing in the display.

4.

Wait for the beep and say the phrase or digits using your
normal tone of voice. Adaptation continues the recording
process with the next phrase or set of digits.

After 15 phrases and sets of digits, adaptation ends and

2.

Select the preferred setting.

your are returned to the Adaptation screen.

3.

Press the OK soft key to accept the new setting. Press
to discard the new setting and return to the Voice

Reset Voice
To reset Voice Service to factory default settings, do the
following:
1.

From the Tools menu, select Voice Service ➔ Voice Settings
➔ Adaptation ➔ Reset Voice. The phone prompts you to

confirm voice adaptation reset.
2.

Settings menu.
Voice Launch

To set the key or action that launches Voice Service, do the
following:
1.

display:

press the No soft key to keep your voice adaptation.
Modes

From the Tools menu, select Voice Service ➔ Voice Settings

• Key Only — Press and hold the Voice Recognition key (
) to
activate Voice Service.
• Key/EarMic — Attach a headset to your phone. Press and hold the
Voice Recognition key (
) or press the button on the headset
to activate Voice Service.
2. Select the preferred setting.

➔ Modes. The following options appear in the display:

3.

Modes lets you specify whether Voice Service is to read prompts
and/or on-screen text to you when you are using your phone’s
menus.
1.

From the Tools menu, select Voice Service ➔ Voice Settings
➔ Voice Launch. The following options appear in the

Press the Yes soft key to reset your voice adaptation, or

• Expert Mode — Voice Signal plays a beep when it requires
information from you.
• Prompt Mode — Voice Signal plays audio prompts for required
information.
• Readout Mode — Voice Signal reads on-screen text and plays
audio prompts for required information.

Press the OK soft key to accept the new setting. Press
to discard the new setting and return to the Voice
Settings menu.

Tools

112

About

This option displays version and build information about the Voice
Service software included on your phone.
䊳

From the Tools menu, select Voice Service ➔ Voice Settings
➔ About.

send or receive information via Bluetooth. To save battery life or
in situations where Bluetooth use is prohibited, such as airline
traveling, you can turn off the Bluetooth wireless technology
headset.
Turn Bluetooth On
1.

The About screen appears in the display showing the

Bluetooth. The Bluetooth

version level of the Voice Service software currently

screen displays.

installed on your phone.

Bluetooth

2.

The Bluetooth wireless technology settings menu provides the
ability to view and change the device name, show the visibility,
and set the security for the device.
Turn Bluetooth On/Off
When the Bluetooth is turned on, you can use the Bluetooth
features available. When the Bluetooth is turned off, you cannot
113

Press the Turn On soft key.
• “Bluetooth Power On” pops-up
in the display.
• The blue Bluetooth On icon
( ) appears on the status bar.
• The SEARCH button becomes
highlighted in blue.

Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30
feet without requiring a physical connection.
Unlike infrared, you don't need to line up the devices to beam
information with Bluetooth. If the devices are within a range of
one another, you can exchange information between them, even
if they are located in different rooms.

From the Tools menu, select

Turn Bluetooth Off
1.

From the Tools menu, select Bluetooth. The Bluetooth
screen displays.

2.

Press the Turn Off soft key. “Bluetooth Power Off” pops-up
in the display, the SEARCH button highlighting disappears,
and the blue Bluetooth On icon (
status bar.

) disappears from the

Add New Device
Searching for Available Bluetooth
Devices
1.

From the Tools menu, select

The Device Info screen appears in the display, showing the
selected device’s name, Type, Status, and Address.
5.

Return to the Bluetooth screen by pressing the OK soft key.

6.

Press, hold, and slide the identified icon to overlap the

Bluetooth. The Bluetooth

Search button. You are prompted to enter the passkey or

screen displays.
2.

Place the Bluetooth device
you want to pair with your
Delve in discoverable mode.
(See the device user manual
for more information.)

3.

Press the SEARCH button.

Note: If Bluetooth is off, it automatically turns on.

Your phone searches for available Bluetooth devices.

PIN for the selected device.
7.

Enter the device passkey or PIN and press the Done soft
key. (See the device user manual for more information.)
Pop-up messages appear and the SEARCH button and
selected device icon are highlighted in blue to inform you
that pairing with the device and connecting to it are
complete.

Note: If you are pairing and connecting to another phone or to a personal
computer, both devices prompt for a passkey or PIN. To successfully
pair and connect your phone with the other device, the same passkey
or PIN must be entered on both devices.

Named icons for available devices appear in the display.
Note: When more than 5 devices are detected, additional icons are placed on
additional Bluetooth screen pages.

4.

Identify the device you want to pair with your phone by
selecting an icon.
Tools

114

Paired Icons
The Bluetooth screen shows the
icons for Bluetooth wireless
technology devices paired with your
handset.
1.

From the Tools menu, select
Bluetooth. Icons for
registered Bluetooth devices
appear in the display.

Connecting to a Bluetooth Device
1.

In the Bluetooth screen,
press, hold, and slide the icon
for the preferred device to overlap the SEARCH button. The
SEARCH button and the device icon flash and are
highlighted in blue to indicate the connection is complete.

2.

If you are unable to connect with the device a pop-up
appears in the display. Press, hold, and slide the selected
icon to overlap the SEARCH button again.

Disconnecting from a Bluetooth Device
1.

In the Bluetooth screen, press the device icon. A device
options list pops-up.

115

2.

Select Disconnect. The device icon’s blue highlighting
disappears.

Managing Your Paired Icons
1.

In the Bluetooth screen, press a device icon. A device
options list pops-up. The following options appear in the
display:

• Disconnect — Lets you disconnect from the selected device.
• Browse Files — Lets you view the folders and files on the
selected device and/or its memory card.
• Send Files — Lets you send copies of files on your Delve to the
selected device.
• Rename — Lets you change or replace the device name, as
needed.
• Remove — Deletes the device from the Bluetooth screen.
• Service list — Lists the Bluetooth services supported by your
Delve.
• Device Info — Shows the device name, Type of device, Status,
and device Address.
2. Select the desired option.

Bluetooth Settings
1.

To access the Delve’s Bluetooth settings, in the Bluetooth
screen, press the Settings soft key. The Phone Settings
screen appears in the display showing the following
options:

• Device Name — Shows your device’s name. You may change this
name. Just select the name and enter your text changes.
• Discovery Mode — Allows other Bluetooth devices to see your
device as accessible. Select On for other devices to see your
device, or Off for no visibility.
• Address — Shows the Bluetooth Address of your phone. (This
address is not changeable.)
2. To save your changes, press the Save soft key. Press

Calendar
Calendar lets you view the current,
past, or future month in calendar
format. While viewing the calendar,
the current date is highlighted, and
days with scheduled events are
surrounded by a box.
Navigating the Calendar
1.

From the Tools menu, select
Calendar.
The calendar appears in the
display with the current date
highlighted. The month and year appear at the top of the

to discard your changes and return to the

display.

Bluetooth screen.
2.

Use the following controls to display a particular month
and to highlight a particular date in the Calendar screen:

• Left/Right buttons — Moves the date and screen back/ahead one
month per keypress.
• Goto soft key — Select a particular date.
Add a New Event
1.

From the Tools menu, select Calendar.
Tools

116

The calendar appears in the display with the current date
highlighted. The month and year appear at the top of the
display.
2.

Highlight the desired date. (For more information, refer to
“Navigating the Calendar” on page 116.)

3.

Press the New Event soft key. The New Event screen
appears in the display.

4.

Enter the event Title. (For more information, refer to

• End Time — Populated with a time one half-hour later that Start
Time. Select the time this event ends.
• Alarm Tone — Select a ringtone from My Ringtones, buy a
ringtone on-line, or select a sound file from My Sounds. When you
select a ringtone or sound, it plays.
• Repeat — Select Off / Every Day / Every Week / Every Month /
Every Year.
7. Press the Save soft key to save your additional details
settings.
8.

“Entering Text” on page 49.)
5.

key.
• End Date — Populated with highlighted Calendar date. Select the
date this event ends.
117

key. An alarm will notify you before the start of this Event,

Select each of the following New Event options:

• Start Date — Populated with highlighted Calendar date. Select the
date this event begins.
• Start Time — Populated with the current time (rounded to the
nearest half-hour). Select the time this event begins.
• Alarm — Select Off / 10 Mins Before / 30 Mins Before / 1 Hour
Before / 1 Day Before / 1 Week Before / Customize (select
particular number of minutes, hours, or days before the Start Date
and Start Time).
6. For additional New Event options, press the Set Details soft

To store this Event in your Calendar, press the Save soft
if Alarm is set to a value other than Off.

View/Change an Event
1.

From the Tools menu, select Calendar.
A calendar appears in the display with the current date
highlighted. The month and year appear at the top of the
display.

2.

Navigate to and select a desired date. (For more
information, refer to “Navigating the Calendar” on
page 116.) The calendar is replaced by the Daily View for
the selected date, listing all events scheduled for this date.

3.

Select an Event to view. The current settings for the
selected Event appear in the display in a scrollable list.

• To change the event details, press the Edit soft key. (For more
information, refer to “Add a New Event” on page 116.)
• To remove the event from the calendar, press the Erase soft key.
(You are prompted to confirm the erasure.)
• To return to the Daily View list, press
.
4. For other options, press the More soft key. The following
options appear in the display:

Memo Pad
Create notes and store them in
Memo Pad. Notes that you create in
Memo Pad can’t be prioritized or
assigned an alert. Return to Memo
Pad anytime to review and edit your
notes.
Create a Memo
1.

From the Tools menu, select
Memo Pad. A list of any stored

• Monthly View — Returns you to the Calendar screen.
• Erase — Remove this event from the Calendar.
5. Select an option to invoke its function.

Memos appears in the
display.
2.

To add a Memo, press the New Memo soft key. A blank
Memo screen appears in the display.

3.

Enter text for this Memo. (For more information, refer to
“Entering Text” on page 49.)

4.

When you’re finished entering details for the Memo, press
the Done soft key. The Memo is saved.

5.

To discard this Memo, press and hold
memo text, then press

to erase the

again to return to the Memo

Pad screen.
Tools

118

Review, Edit, Erase, and Send Memos
1.

From the Tools menu, select Memo Pad. A list of any stored
Memos appears in the display.

2.

To review a Memo, select it. The text of the Memo appears
in the display in a scrollable screen.

3.

To edit a Memo, select it and press the Edit soft key. The
Memo text appears in a text entry screen. (For more
information, refer to “Entering Text” on page 49.)

• To save your changes and return to the Memo Pad screen, press
the Done soft key.
• To discard your changes and exit Memo Pad, press
. You
are prompted to confirm your wish to exit Memo Pad.
4. To erase a Memo, select it and press the Erase soft key.
You are prompted to confirm the erasure.
5.

Your phone has three alarm clocks that you can set to go off
once, or to recur daily at a specific time. Once set, an alarm clock
is easy to change or turn off completely.
Note: The Alarm Clock doesn’t function when the phone is turned off. If the
time for an alarm that was set for Once has elapsed while the phone is
off, the alarm sounds at the specified time on the next day.

Set an Alarm
1.

From the Tools menu, select
Alarm Clock. The Alarm
screen appears in the display,
listing any currently set
alarms.

2.

Press the New Alarm soft key.

To send a memo as a text message, select the memo, then

The following Alarm options

press the Send text message soft key. The memo text

appear in the display:

appears in the Text Msg screen as part of the message

• Alarm Name — Populated with
the default name, Alarm. To
change, select this field and
enter a new name. (For more information, refer to “Entering Text”
on page 49.)

text.

119

Alarm Clock

• Alarm Time — Populated with the current time. To change the
time, select this field, select a new time, and press the Set soft key.
• Alarm Repeat — Select the day(s) of the week (Sun – Sat) on
which this alarm is to sound. The alarm will sound every week on
the day(s) selected.
• Alarm Tone — Populated with Alert 1. To change, select this field,
select the preferred ringtone in the My Ringtones screen, then
press the Set soft key.
• Alarm Volume — Press and slide to set to the preferred volume.
• Alarm Snooze — Select On to enable snooze timer for this alarm,
then select values for the following options:
– Snooze Duration — Select 1 min, 2 min, 3 min, 5 min, or 7 min.
– Snooze Repeat — Select Once, Twice, 3 Times, 5 Times, Or 10
Times.
3. When you’re finished selection option values for the alarm,

Note: If the alarm is set to repeat on one or more days, the alarm icon
remains in the top of the display.
If the alarm was set as a once only alarm (no repeat day selected), the
alarm icon disappears from the top of the display.

Turn Off an Alarm
1.

2.

1.

screen appears in the display,
listing any currently set
alarms.
2.

shown) or Stop.

to Snooze (if

Press the Erase soft key. The
Select to erase screen

An animated alarm clock appears in the display and an alert
sounds when the specified time for the alarm arrives.
To silence the alarm, press and slide

From the Tools menu, select
Alarm Clock. The Alarm

) appears in the top of the display.

When an Alarm Sounds

䊳

Press the Off button on the Alarm you wish to turn off.

Erasing an Alarm

press the Save soft key. If the Alarm is set to On, the alarm
icon (

From the Tools menu, select Alarm Clock. The Alarm screen
appears in the display, listing any currently set alarms.

appears in the display.
3.

Select the check box for the
Alarm you want to remove
from the list. A check mark appears in the selected box.
Tools

120

4.

Press the Erase soft key. The selected Alarm is removed
from the list.

World Time
World Time lets you set up to four
clocks to the time of day or night in
any of the 24 different time zones
around the world.

Setting a World Clock
The home clock is set to a default
time and city and is labeled with the
name of the city. To change this or
another World Clock setting, do the
following:
1.

From the Tools menu, select
World Time. The World Time

Note: To use World Time, you need to
subscribe to your Wireless Provider’s
digital service.
䊳

screen appears in the display
listing your current World
Clocks.

From the Tools menu, select
World Time. A list of your

2.

set to a new time zone. The Add City screen appears in the

selected clocks appears in

display.

the display. The following
icons appear in the list:

Select the clock you wish to

3.

Press and slide the map until you see the city whose time
you wish to select as this clock’s new time.

Indicates the clock set to your home (local) time.
Indicates your 2nd clock.

Note: Your Home and 2nd clocks also appear in the Clock widget. (For more
information, refer to “Widget” on page 129.)

121

4.

Select the city. The displayed time changes to the time for
the selected city.

5.

Press the Save soft key. Your choice is saved and you are

2.

returned to the World Time screen.

Add City screen appears in

Enable Daylight Saving Time (DST)
1.

In the Add City screen, on the

the display.
3.

you see the city whose time

icon (

you wish to select as this

). The icon

time display changes to

clock’s new time.
4.

reflect the new DST setting.

Select the city. The displayed
time changes to the time for
the selected city.

Press the Save soft key. You
are returned to the World

5.

Press the Add soft key. Your

Time screen. The changed

choice is saved and you are returned to the World Time

World Clock shows the DST

screen.

icon overlaying the Clock icon
(

).

Adding a World Clock
1.

Press and slide the map until

time display, press the DST
becomes highlighted and the

2.

Press the Add soft key. The

From the Tools menu, select World Time. The World Time
screen appears in the display listing your current World
Clocks.

Selecting Your 2nd Clock
Your 2nd Clock and your Home Clock both appear in the Clock
widget when you move it from the Widget Bar to the standby
screen. By changing your 2nd Clock, you can quickly and easily
keep track of the time in a new city and at home. (For more
information, refer to “Widget” on page 129.)

Tools

122

1.

From the Tools menu, select

2.

Press the Erase soft key. The

World Time. The World Time

Select to erase screen

screen appears in the display

appears in the display.

listing your current World
Clocks.

Note: Your Home and 2nd clocks are
disabled in the Select to erase screen
to prevent them being erased.

2.

Press the Set as 2nd Clock

3.

Select the World Clock you

want to erase. A check mark

prefer as your 2nd Clock. The

appears in the selected World

2nd check mark moves to

Clock’s checkbox.

soft key.

your selection.
4.

World Time lets you erase all of your World Clocks except your
Home clock (
) and 2nd clock (
).
From the Tools menu, select World Time. The World Time
screen appears in the display listing your current World
Clocks.

123

4.

Select the World Clock you

Press the Erase soft key. You
are returned to the World Time screen in which the erased

Press the OK soft key. Your selection is saved.

Erasing a World Clock

1.

3.

World Clock no longer appears.

Calculator
You can perform calculations, including addition, subtraction,
multiplication, division, and percentages using your phone.
1.

From the Tools menu, select Calculator. The Calculator
screen appears in the display.

2.

Stop Watch

Enter the first number in your
calculation using the

You can use this function to set a
stop watch.

calculator-style touch

1.

keypad. (Numbers can be up

Stop Watch. The Stop Watch

include a decimal point

screen appears in the display.

followed by up to 5 more

2.

digits.)
3.

3.

delete your last entry, press

To record succeeding event/
lap times, press the LAP soft

using parentheses “( )”. To

5.

To start the Stop Watch count,
press the Start soft key.

Select the desired operation.
[You can nest calculations

4.

From the Tools menu, select

to 15 digits long, and can

key at the start of each
.]

succeeding event/lap to

Use the keypad to enter the second number for your

record the completion time for the previous event/lap. You

calculation.

can record up to eight event/lap times.

Press

to perform the calculation and view the result.

4.

To stop the Stop Watch count, press the Stop soft key.

5.

To resume the Stop Watch count, press the Restart key.

6.

To erase all Stop Watch (lap) times recorded, press the
Reset soft key.

Tools

124

Converter
The conversion menu provides the
following conversion categories:
• Currency
• Length
• Weight
• Volume
• Area
• Temperature
Using Converters
To convert a currency, length,
weight, volume, area, or
temperature, do the following:
1.

From the Tools menu, select Converter. The following list of
converters appears in the display:
•
•
•
•
•
•

125

Currency
Length
Weight
Volume
Area
Temperature

2.

Select the conversion feature you wish to use.

3.

Press the down arrow key and select the units to be
converted from.

4.

Enter the quantity you want converted in the field at the top
of the screen. The converted quantities appear opposite
their respective units of measure.

Currency — Reviewing/Editing Exchange Rates
The Currency Converter includes
long-term average exchange rates
as default values. To review and/or
change a default exchange rate to
the current exchange rate, do the
following:
1.

From the Tools menu, select
Converter ➔ Currency.

2.

Press the View Rates soft key.
A list of exchange rates
appears in the display.

3.

Select the exchange rate you
wish to change.

4.

Enter the changed exchange
rate value.

5.

Press the Done soft key to
save the changed exchange
rate.

Currency — Adding Exchange Rates
You can use the Currency Converter
to convert from and to obscure
currencies by adding exchange
rates for these currencies. To add a
currency and its exchange rate to
the Currency Converter, do the
following:
1.

From the Tools menu, select
Converter ➔ Currency.

2.

Press the View Rates soft key.
A list of exchange rates
appears in the display.

3.

Use the left and right arrow buttons at the top of the list to
display the base currency for the new exchange rate.

4.

Press the Add Rates soft key. A new line containing blank
exchange rate fields appears at the bottom of the
exchange rates list.

5.

Select the currency identifier field.

Tools

126

6.

Enter an identifier of up to 4 characters for the new

3.

Press the Erase Rates soft

currency. (For more information, refer to “Entering Text”

key. The Select to Erase

on page 49.)

screen appears in the display,

7.

Highlight the exchange rate field.

listing those rates you can

8.

Enter a decimal exchange rate for the new currency using
the keypad.

Note: The Exchange Rate field only accepts up to seven characters (including
the decimal point) with up to five digits before or after the decimal
point (for example: 1234567, 0.12345, 1.23456, 123.456, 12345.6).

erase.
Note: The Erase Rates soft key only
appears if there are user-added
currency conversion rates in the
Rates list.

4.
9.

exchange rate to be erased. A

soft key.

check mark appears in the

Currency — Erasing Exchange Rates

checkbox for the selected rate.

You cannot erase the preloaded currencies from the Exchange
Rate list. You can erase a currency that you have added to the list
by doing the following:
1.

From the Tools menu, select Converter ➔ Currency.

2.

Press the View Rates soft key. A list of exchange rates
appears in the display.

127

Select a user-added currency

To add the new exchange rate to the list, press the Done

– Or –
Select Select All. Checkmarks appear in the checkboxes
for all user-added rates.
5.

Press the Done soft key. You are returned to the Rates List.
The erased rate no longer appears in the list.

Tip Calculator
Tip Calculator automatically
calculates the following amounts:
• Gratuity (tip)
• Individual payment (for groups)
Calculations are based on the total
amount of the check, a selected
gratuity percentage, and the
number of people paying.
1.

From the Tools menu, select
Tip Calculator. The Tip
Calculator screen appears in
the display.

2.

Select the Bill field and enter the total amount of the bill.

3.

Select the Tip field and enter a tip percentage.

4.

Select the # Paying field and enter the number of persons
paying using the keypad.

5.

The amount of the Tip, the bill Total, and the amount Each
person should pay appear in the lower half of the screen.

Tools

128

Section 18: Changing Your Settings
This section explains how to customize your phone to suit your
needs and preferences.

Settings Menu
䊳

To access the Settings menu, select Menu ➔ Settings. The
Settings menu appears in the display.

Location
This function identifies your location to the network via the Global
Positioning System (GPS). You can set this function for
continuous operation or to operate only in the event that you dial
911.
Note: Contact your Wireless Provider to determine whether, when, or where
location-based services are available.

1.

From the Settings menu, select Location. The following
options appear in the display:

• Location On — GPS location setting is on whenever you make or
receive a call, wherever the feature is available.
• 911 Only — GPS location setting is on only when you dial 911.
2. Select the desired Location setting. You’re returned to the
Settings menu.
129

Widget
This function lets you select which
optional widgets appear in the
Widget Bar.
For more information, refer to
“Using Widgets” on page 35.
1.

From the Settings menu,
select Widget. The following
options appear in the display:
• Clock — Displays current time.
• Date — Displays current date.
• Images — Launches My
Images folder.
• Mini Player — Plays music files in My Music folder on a microSD
Memory Card.
• Alarm — Lets you set alarm clock.
• Top5 — Launches the Favorites screen. Lets you access your
Contacts list and Contacts Groups as well.
• Sketchpad — Lets you draw images or handwrite text into a file.
• Voicemail — Checks your voicemail messages.

• Nutsie — Launches an Internet content portal which lets you
access “cool” content files.
• MyCast Weather — Displays weather report for entered ZIP code.
• Collapse — Launches a game.
• Calculator — Launches Calculator tool.
• Calendar — Launches Calendar tool.
• Help — Lets you access your Wireless Carrier’s on-line Help
service.
2. To enable/disable a particular widget, select the associated
option in the Widget screen. A check mark appears in/
disappears from the option’s check box.
3.

To enable/disable all available widgets, select Select All/
Unselect All. A check mark appears in/disappears from all
the options’ check boxes.

4.

To save your new settings, select OK. You are returned to
the Settings menu.

Display Settings
Using the Display menu, you can set the menu style, set the
standby mode animation, customize the backlight settings, and
more.
1.

From the Settings menu, select Display Settings. The

following options appear in the display:
• Main Menu Style — Lets you choose whether the Main Menu
appears as a matrix of icons or as a list of menus.
• Wallpaper — Lets you choose the picture(s) that display(s) on your
phone when in standby mode.
• Banner — Lets you create your own personalized greeting that
appears in the display when your phone is in standby mode.
• Backlight — Lets you set backlight options for the LCDs, keypad,
and set the brightness.
2. Select the desired sub-menu. The following sections
describe the Display sub-menus in greater detail.
Main Menu Style
Main Menu Style allows you to choose how the main menu
appears in your display. You are shown a preview of your choice.
1.

From the Settings menu, select Display Settings ➔ Main
Menu Style. The following options appear in the display:

• Grid — Display the main menu as a 3x4 grid of icons.
• List — Display the main menu in a list format.
2. Select the desired menu format.
3.

Press the OK soft key to save your selection and return to
the Display Settings menu.
Changing Your Settings

130

Wallpaper

To set an image without

Wallpaper lets you choose the
pictures that appear in your phone’s
displays while in standby mode.

previewing it, press the radio

From the Settings menu,

blue dot appears in the radio

1.

button to the right of a
preferred picture or image. A

select Display Settings ➔
Wallpaper. A scrollable list of
thumbnail images appears in
the display.
• To obtain additional images not
included with your phone, press
the Buy Images soft key.
2. To preview an image, select
the image. An expanded view appears in the display.
– Or –

131

button.
3.

To save your choice, press the
Set soft key.
• If you selected a “Preloaded”
image, you are returned to the
Display Settings menu.
• If you selected a photo taken with
your phone’s camera or a downloaded image, the Set as
Wallpaper pop-up appears showing the following options:
– Fit to Screen — Resizes the selected image to fit the Delve display.
– Rotate & Center — Rotates the selected image clockwise 90o and
centers it on the screen.
– Center image — Places the center of the selected image at the center
of the Delve display.
Select the preferred option. Your selected image is prepared and saved
as the new Wallpaper. You are returned to the menu.

Banner

Note: Prolonged backlight use drains your battery faster.

Create your own personalized greeting that appears in the
display while your phone is in standby mode.
1.

Backlight ➔ Backlight Time. The following options appear
in the display:

to erase an existing banner.

Select the Banner field and enter a word or short phrase
(up to 32 characters) to appear in your phone’s display
while in standby mode. (For more information, refer to
“Entering Text” on page 49.)

3.

Select the preferred Display setting: On (banner displays),
Off (banner does not display).

4.

From the Settings menu, select Display Settings ➔

The Banner screen appears in the display.
Note: If necessary, press and hold

2.

1.

From the Settings menu, select Display Settings ➔ Banner.

Press the Save soft key to save the new/changed banner
and return to the Display Settings menu.

•
•
•
•

7 Seconds
15 Seconds
30 Seconds
Always On (this setting uses much more power than the timed
settings)
• Always Dim
2. Select the desired Backlight Time setting.
Brightness

Brightness lets you adjust the brightness of the backlight.
1.

Backlight ➔ Brightness. The Brightness screen appears in

Backlight
Backlight Time

From the Settings menu, select Display Settings ➔
the display.

2.

You can set the backlight for your display to remain on or off or to
remain on for a specified period of time.

To adjust the backlight brightness, press, hold, and slide
the Level button left or right.

3.

To save your new setting, press the Save soft key.
Changing Your Settings

132

Charging Light

When set to On, the Charging Light displays a dimmed, animated
charging progress image appears when the Backlight dims with
a charger connected to the Delve.
1.

From the Settings menu, select Display Settings ➔
Backlight ➔ Charging Light. The Charging Light screen
appears in the display.

2.

3.

Select the desired setting (On / Off). The blue dot moves to

The Volume screen appears
in the display showing the
following options:
• Master Volume — Controls the
loudness of all phone sounds.
• Messages Volume — Controls
the loudness of the ringtone
played for incoming messages.
2. Select the volume option you

the selected setting.

want to change. The

To save your new setting, press the OK soft key.

associated Volume screen

Sounds Settings
The Sounds Settings menu provides a variety of options to
customize audio properties for such things as ringers, keypad
tones alerts, and more.

appears in the display.
3.

Volume
Volume lets you adjust the loudness of the sounds your Delve
produces.
1.

From the Settings menu, select Sounds Settings ➔ Volume.

Select the preferred Volume setting:
• Low

• Low/Medium

• Medium

• Medium/High

• High

• Silence all

• Alarm only

• Vibrate only

• 1 beep
4.

To preview your new setting, press the Play soft key. To
end the preview, press the Stop soft key.

133

5.

To retain your setting, press the Set soft key. Your are

2.

returned to the Volume screen.
6.

related, scrollable ringtones
list appears in the display.

To save your new settings and return to the Sound Settings
menu, press the OK soft key.

3.

1.

ringtone in the list.
4.

From the Settings menu, select Sounds Settings ➔ Ringer
Type.
The following options appear in the display:
• Voice Calls — Lets you set which ringtone, sound file, and/or one
of a set of ringtones and/or sound files plays when you receive a
voice call.
• Text Message — Lets you set which ringtone or sound file plays
when you receive a Text Message.
• Pic/Video Message — Lets you set which ringtone or sound file
plays when you receive a Picture Message or Video Message.
• Voicemail — Lets you set which ringtone or sound file plays when
you receive a Voicemail message.

To assign a ringtone to the
selected option, select a

Ringer Type
You can assign ringer types and melody tones for calls, alarms,
and other alerts, in the Ringer Type sub-menu.

Select the desired option. A

To assign a sound file to the
selected option:

• Press the down arrow in the
upper right corner of the screen.
• Select Sounds. A sound files list
appears in the display.
• Select the preferred sound or record a new sound by pressing the
Record New soft key. (For more information, refer to “Voice
Memo” on page 107.)
5. To retain your selection and return to the Ringer Type
screen, press the Set soft key.
6.

To save your new ringer settings and return to the Sound
Settings menu, press the OK soft key.

Changing Your Settings

134

Alerts
You can set your phone to sound an alert whenever you enter or
leave your service area, connect or disconnect a call, as well as
other options.
1.

From the Settings menu, select Sounds Settings ➔ Alerts.
The following Alerts options appear in the display:

• Minute Beep — Sounds an alert ten seconds before each elapsed
minute of a call.
• Roaming — Sounds an alert when you leave your home service
area during a call.
• Call Connect — When you make a call, an alert sounds when the
call is answered.
• Power On — Plays a melody when the phone is being turned on.
• Power Off — Plays a melody when the phone is being turned off.
2. Select the desired Alert option setting (On or Off).
3.

To save your new alert settings and return to the Sound
Settings menu, press the OK soft key.

Key Tone
Key Tone lets you select the volume and the length of the DTMF
tones that the Delve sends when dialing.
1.

press the OK soft key.
Vibrating Alert
Vibrating Alert lets you set your phone to vibrate in sync with
ringtones and melodies your phone plays.
1.

From the Settings menu, select Sounds Settings ➔
Vibrating Alert.

2.

Select On or Off.

3.

To save your new setting and return to the Sound Settings
menu, press the OK soft key.

Widget Effect
Widget Effect lets you control the unique sound effects your
phone can produce when you use the Widget bar or individuals
Widgets.
1.

From the Settings menu, select Sounds Settings ➔ Widget
Effect.

From the Settings menu, select Sounds Settings ➔ Key
Tone. The following options appear in the display:

135

• Tone Level — Lets you set the volume for the key tones (Silence
all, Low, Low/Medium, Medium, Medium/High, High).
• Tone Length — Lets you set the length of the key tones (Normal,
Long).
2. To save your new setting and return to the Key Tone menu,

2.

Select On or Off.

3.

To save your new setting and return to the Sound Settings
menu, press the OK soft key.

Call Settings
Call Answer
You can select a specific answer mode when you receive an
incoming call.
1.

From the Settings menu, select Call Settings ➔ Call
Answer.
The following call answer settings appear in the display:
• Any Key — Press any key except the
or Left soft key to
answer an incoming call.
• Send Key — Press
to answer an incoming call.

Tip: You can set your phone to answer calls automatically, without any input
from you. (For more information, refer to “Auto Answer” on page 136)

2.

Select the desired call answering method and press the OK
soft key to save your selection.

Call Alert
1.

From the Settings menu, select Call Settings ➔ Call Alert.

• Caller ID + Ring — Phone rings and the display shows caller ID for
an incoming call.
• Name Repeat — Phone repeats displaying Contact name or caller
ID.
2. Select the desired call alerting method and press the OK
soft key to save your selection.
Auto Answer
With Auto Answer enabled, your phone automatically answers
calls after a period of time that you select.
1.

From the Settings menu, select Call Settings ➔ Auto
Answer. The following settings appear in the display:

• Off — Disables automatic answering of calls
• After 1 Second — Phone automatically answers calls after 1
second
• After 3 Seconds — Phone automatically answers calls after 3
seconds
• After 5 Seconds — Phone automatically answers calls after 5
seconds
2. Select the desired call automatic answering setting and
press the OK soft key to save your selection.

The following Call Alert settings appear in the display:
• Ring Only — Phone rings for an incoming call.
Changing Your Settings

136

Speed Dial
Speed Dial lets you disable the speed dialing function, except for
the Voicemail hot key (
) which remains active. (For more
information, refer to “Speed Dial Numbers” on page 44.)
1.

From the Settings menu, select Call Settings ➔ Speed Dial.

• On — Enables the speed dial keys.
• Off — Disables the speed dial keys.
2. Select the desired setting and press the OK soft key to save
your selection.

2.

your selection.
TTY Mode
Your phone is fully compatible with TTY equipment used by those
who are hearing impaired. TTY equipment is connected to your
phone through the headset connector on the top of the phone.
TTY Mode must be enabled before you can use your phone with a
TTY device.
1.

1.

From the Settings menu, select Call Settings ➔ Auto Retry.

current TTY Mode setting.
Note: The “Enabling TTY may Impair Headset Use and Non-TTY Accessory
Performance.” message pops up when you select TTY Mode.

2.

The following settings appear in the display:
• Off — Disables automatic re-dialing of numbers
• Every 10 Seconds — Phone automatically re-dials a number
every 10 seconds
• Every 30 Seconds — Phone automatically re-dials a number
every 30 seconds
• Every 60 Seconds — Phone automatically re-dials a number
every 60 seconds
137

From the Settings menu, select Call Settings ➔ TTY Mode.
You are prompted to confirm you want to change the

Auto Retry
Auto Retry automatically re-dials a number if the connection fails.
Depending upon your location, the number of times your phone
automatically dials the number may vary.

Select the desired setting and press the OK soft key to save

To access the TTY Mode settings, press the Yes soft key. To
return to the Call Settings sub-menu, press the No soft key.

3.

If you press the Yes soft key, the following settings appear
in the display:
• TTY Full — Enables TTY mode and disables microphone and
earpiece.
• TTY+Talk (VCO) — Enables TTY mode and microphone.
• TTY+Hear (HCO) — Enables TTY mode and earpiece.

4.

• TTY Off — Disables TTY mode.
Select the desired TTY Mode setting and press the OK soft
key to save your selection.

Note: The TTY icon (
) appears in the top of the display when the phone is
in standby mode.

Voice Privacy
Voice Privacy when enabled (that is, set to Enhanced), turns on
advanced voice encryption.
1.

From the Settings menu, select Call Settings ➔ Voice
Privacy. The following settings appear in the display:

• Standard — Voice privacy is disabled
• Enhanced — Voice privacy is enabled
2. Select the desired Voice Privacy setting and press the OK
soft key to save your selection.
Data Settings
Use the Data Settings menu to configure data connection
settings.
1.

From the Settings menu, select Call Settings ➔ Data
Settings. The following settings appear in the display:
• Data Off — No incoming data calls accepted.

• Data For Next Call — Wait for data call for the next 10 minutes.
• Data Until Powered Off — Data calls only, no voice calls accepted,
until you power the phone off and on again.
2. Select the desired data call connection setting and press
the OK soft key to save your selection.

Phone Settings
Airplane Mode
When set to On, Airplane Mode disables all radio functions of your
phone. This prevents you from receiving or making calls (except
emergency calls), but allows you to use other features (such as
the camera and the Tools) safely in sensitive environments, such
as on board an aircraft.
1.

From the Settings menu, select Phone Settings ➔ Airplane
Mode.The following settings appear in the display:

• On — Disables the radio transmitter and receiver in your phone
• Off — Enables the radio transmitter and receiver in your phone
2. Select the desired Airplane Mode setting and press the OK
soft key to save your selection.
Language
The language option on your phone can change the language of
voice prompts, menus, and key-input.
Changing Your Settings

138

1.

From the Settings menu, select Phone Settings ➔
Language. The following settings appear in the display:

• English
• Español
2. Select the desired Language setting and press the OK soft
key to save your selection.

Auto Keypad Lock
Auto Keypad Lock lets you set your phone to automatically lock
all keys (except the Power On/Off-LOCK key) when the Backlight
time expires.
Tip: If you set Backlight to Always On or Always Dim, Auto Keypad Lock is
disabled. You can manually lock the touch screen and all keys by
pressing the Power On/Off-LOCK key (
) at the top of the phone.

Vibration Feedback
When set to On, Vibration Feedback causes your phone to vibrate
as well as play a tone when you press a key, button, or field on
the phone to assure you that your screen press is recognized.
1.

From the Settings menu, select Phone Settings ➔ Vibration
Feedback.The following options appear in the display:

• Activation
– On — Enables vibration feedback.
– Off — Disables vibration feedback.
• Vibration intensity — Push and slide left and right (0 – 5).
2. Select the desired Vibration Feedback settings and press
the Save soft key to save your selection.

139

1.

From the Settings menu, select Phone Settings ➔ Auto
Keypad Lock.

2.

Select On or Off.

3.

To save your new setting and return to the Phone Settings
menu, press the OK soft key.

Security
Use the Security menu to lock your phone, set up emergency
numbers, set restrictions, as well as other security options.
Lock Phone

Locking the phone limits all outgoing calls except calls to 911
emergency and the three user-programmable emergency
numbers. You can lock the phone manually during use, or set the
phone to lock automatically when it is turned on. With the phone
in lock mode, you can answer incoming calls, but you must

unlock the phone to place outgoing calls (except to emergency
and secret numbers).
1.

From the Settings menu, select Phone Settings ➔ Security.
You’re prompted to enter the lock code.

Change Lock Code

The default lock code for your phone is generally the last four
digits of your phone number. It is advisable to change the default
lock code to a secret code for security purposes.
1.

Note: The default lock code is the last four digits of your telephone number.

2.

Select the lock code field, enter the lock code, and press

From the Settings menu, select Phone Settings ➔ Security.
You’re prompted to enter the lock code.

Note: The default lock code is the last four digits of your telephone number.

the OK soft key.
3.

Select Lock Phone. The following phone Lock mode

2.

Select the lock code field, enter the lock code, and press
the OK soft key.

settings appear in the display:
• Lock — Locks the phone immediately (The phone stays locked
until you enter the lock code.)
• Unlock — Unlocks the phone.
• On Power Up — The phone locks automatically the next time your
phone is powered ON (The phone stays locked until you enter the
lock code.)
4. Select the desired phone Lock mode setting and press the

3.

Select Change Lock Code. You’re prompted to enter the
new lock code.

4.

Enter the new lock code and press the OK soft key. You’re

5.

Enter the new lock code again and press the OK soft key.

prompted to re-enter the new lock code for verification.
Your new Lock Code is stored.

OK soft key to save your selection.
Tip: You can manually lock your phone by pressing
information, refer to “Lock Mode” on page 15.)

. (For more

Note: Your phone does not allow you to view the Lock Code for obvious
security reasons. If you change the Lock Code, be sure to write down
or memorize the new code.

Changing Your Settings

140

Emergency #

Your phone provides the option of storing three emergency
numbers. Each number can be up to 32 digits in length. All
emergency numbers can be manually called at any time, even
when your phone is locked or restricted. This can be a useful
feature for controlling outgoing calls from your phone.
Note: Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked or restricted. If
you call 911 an audible tone is heard and an Emergency prompt
appears in the display for the duration of the call.

Note: The default lock code is the last four digits of your telephone number.

2.

Select the lock code field, enter the lock code, and press
the OK soft key.

3.

Select Emergency #.

4.

Select from the three emergency number entries.

5.

Enter an emergency number (up to 32 digits in length),
then press the Done soft key to save the number that you
entered.

Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.

Call Emergency Numbers in Lock Mode
1.

In standby mode, enter the emergency number.

2.

Press

to place the call.

Reset Phone
Important!: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.

Remember to always turn your phone on and check for adequate
signal strength before placing a call.
Store Emergency Numbers
1.

Reset Phone returns all Settings to their factory default values.
1.

You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.

From the Settings menu, select Phone Settings ➔ Security.
You’re prompted to enter the lock code.

From the Settings menu, select Phone Settings ➔ Security.

2.

Select the lock code field, enter the lock code, and press
the OK soft key.

141

3.

Select Reset Phone. You are prompted to confirm that you

4.

and Voice Dial).
4.

To return to the Security sub-menu without resetting the
phone, press No. To restore default settings, press Yes.

Erase All Contacts

Erase memory erases your Contacts and Group information
(except Default). This feature is useful if you want to give your
phone to someone else.
1.

From the Settings menu, select Phone Settings ➔ Security.

Restrictions

Restrictions lets you restrict the use of your phone for outgoing
calls, incoming calls, and calls placed from your Contacts.
1.

From the Settings menu, select Phone Settings ➔ Security.
You’re prompted to enter the lock code.

Note: The default lock code is the last four digits of your telephone number.

2.

You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.

To erase all entries, press Yes. To keep the current entries
and return to the Security sub-menu, press No.

want to restore default settings (except for the Contacts

Select the lock code field, enter the lock code, and press
the OK soft key.

3.

Select Restrictions. The following options appear in the
display:

2.

Select the lock code field, enter the lock code, and press
the OK soft key.

3.

Select Erase All Contacts. You are prompted to confirm
erasure of all Contacts entries.

• Outgoing Calls — Allows/blocks/or restricts your calls.
• Incoming Calls — When set to On, restricts the phone from
receiving calls.
4. Select the desired Call Restriction. The following options
appear in the display:

Note: This procedure does not delete your Photo Gallery. The Photo Gallery
needs to be deleted separately.

• Allow All — Lets you make or receive calls with no restriction.
• Allow None — Blocks you from making or receiving calls.

Changing Your Settings

142

• Allow Contacts — Blocks you from making calls to, or receiving
calls from, any number not in your Contacts list.
5. Select the preferred setting.
6.

To save your new setting, press the OK soft key.

NAM Selection
The Network menu allows you to select NAM (Number
Assignment Module) settings for your phone. You can store two
NAM settings, which are essentially telephone numbers, for your
phone.
1.

The following roaming options appear in the display:
• Home Only — Your phone is available for normal operation only
within your designated coverage area.
• Automatic-A — Your Wireless Provider’s Preferred Roaming List
(PRL) of networks is used to acquire service. If no preferred systems
are found, any digital “A” system is acquired.
• Automatic-B — Your Wireless Provider’s PRL of networks is used
to acquire service. If no preferred systems are found, any digital “B”
system is acquired.
2. Select the preferred roaming option, then press the OK soft
key.

From the Settings menu, select Phone Settings ➔ NAM
Selection. The following options appear in the display:

• NAM1 — Your service contract has one phone line.
• NAM2 — Your service contract has two phone lines.
2. Select the desired NAM setting. The phone powers itself

Set Time
Use the Set Time option to set the current date and time.
Note: In digital service mode, the Set Time feature is disabled. The network
adjusts time and date automatically.

off and back on.

With Airplane Mode set to On, this function is enabled. In digital service
mode, setting Airplane Mode to Off also disables Set Time. (For more
information, refer to “Airplane Mode” on page 138.)

System Select
The System Select menu allows you to select the roaming setting
for your phone.
1.

143

1.

From the Settings menu, select Phone Settings ➔ Set Time.

From the Settings menu, select Phone Settings ➔ System

The following options appear in the display:

Select.

• Set Date
• Set Time

2.

Select the desired option.
• For Set Date, the Set Date screen appears in the display.
– Use the up and down arrow buttons to select the current date.
– Press the OK soft key to save your date setting.
• For Set Time, the Set Time screen appears in the display.
– Use the up and down arrow buttons to select the current time.
– Press the OK soft key to save your time setting.

Calibration
Calibration lets you adjust the screen ability to correctly locate
your touch.
1.

Calibration. The Calibration screen appears in the display.
2.

To begin calibration of the screen, press the OK soft key. A

3.

To calibrate the screen, press the center of each cross in

series of five crosses appear in the screen.

Touch Sensitivity
Touch Sensitivity lets you adjust how much pressure you must
apply to the screen for the Delve to react.
1.

2.

From the Settings menu, select Phone Settings ➔ Touch

Important!: For this calibration process to succeed, it is recommended that
you use a stylus to accurately set the new touch points.

display.

PC Connection

Press, hold, and slide the Touch Sensitivity button left or
– 5).
Test your setting by applying pressure to the Touch Here
button until it responds.

4.

If desired, repeat steps 2 and 3 until the Touch Sensitivity
setting is acceptable.

5.

turn.

Sensitivity. The Touch Sensitivity screen appears in the

right to adjust the screen’s responsiveness to your touch (1
3.

From the Settings menu, select Phone Settings ➔

To save your new setting, press the Save soft key.

PC Connection lets you select how your Delve responds to being
connected to personal computer using an optional USB Data
Cable.
1.

From the Settings menu, select Phone Settings ➔ PC
Connection. The following PC Connection options appear in
the display:
• USB Mass Storage — Allows you to manage files on an optional
microSD Memory Card in your Delve, just as you would files on a
flash drive.
Changing Your Settings

144

• USB Modem — Allows you to use your Delve as a wireless modem
for your PC.
2. Select the desired setting, and press the OK soft key to
save it and return to the Phone Settings screen.

Phone Memory Usage
Phone Memory Usage lets you review your usage of your phone’s
memory.
1.

Memory Manager
Memory Manager lets you quickly and easily review and manage
your phone memory usage. To access Memory Manager, do the
following:
䊳

From the Settings menu, select Memory Manager. The
following options appear in the display:
• Phone Memory Usage — Lets you review your phone’s used and
available memory.
• Card Memory Usage — Lets you review a removable Memory
Card’s used and available memory.
• Save Options — Lets you specify whether your images and videos
will be stored in your phone or on an optional Memory Card.
• Phone Memory — Lets you review your phone’s available memory
and manage your files stored there.
• Card Memory — Lets you review a removable Memory Card’s
available memory, manage your files stored there, and format new
Memory Cards.

From the Settings menu, select Memory Manager ➔ Phone
Memory Usage. The Phone Memory Usage screen appears
in the display showing the following information:

• Total Used memory usage
• Available unused memory
• Images memory usage
• Videos memory usage
• Ringtones memory usage
• Sounds memory usage
• Applications memory usage
• Pic/Video Msg memory usage
2. Press the OK soft key to return to the Memory Manager
menu.
Card Memory Usage
Card Memory Usage lets you review your usage of your Memory
Card.
1.

From the Settings menu, select Memory Manager ➔ Card
Memory Usage. The Card Memory Usage screen appears in

145

the display showing the following information:
• Total memory usage
• Available unused memory
• Images memory usage
• Videos memory usage
• Music memory usage
2. Press the OK soft key to return to the Memory Manager
menu.

3.

type, then press the Save soft key. You are returned to the
Memory Manager menu.
Phone Memory
Phone Memory sub-menus let you list files in your multimedia
folders and let you erase or move files as needed to free up
memory on your phone for reuse.
1.

Save Options
Lets you specify where you want your images and videos stored.
To access Save Options, do the following:
1.

The following file type options appear in the display:
• Images
• Videos
2. The following storage options appear in the display for

Memory. The Phone screen appears in the display listing
2.

To select another folder, press the down arrow button. The
following options drop down:

• Images
• Videos
• Ringtones
• Sounds
3. Select the desired option. A list of all files in the related
folder appears in the display. Files are listed by name.

each file type:
• Phone — Saves the selected type of files in your phone’s memory.
• Card — Saves the selected type of files in a removable microSD
memory card.

From the Settings menu, select Memory Manager ➔ Phone
files in the Images folder.

From the Settings menu, select Memory Manager ➔ Save
Options.

Select the preferred storage location for the desired file

4.

To erase files, do the following:
• Press the Erase soft key. The Select to erase screen appears in
the display.
Changing Your Settings

146

• Select the check box for a file you want to erase to mark the file for
erasure. (Press the Select All check box to mark all files for
erasure.)
• Press the Erase soft key.
5. To move files to the Memory Card, do the following:
• Press the Move soft key. The Select to move screen appears in the
display.
• Select the check box for a file you want to move to mark the file for
removal to the Memory Card. (Press the Select All check box to
mark all files for removal.)
• Press the Move soft key.
6. Press
to return to the Memory Manager menu.
Card Memory
Card Memory sub-menus let you list files in your multimedia
folders and let you erase or move files as needed to free up
space on your Memory Card for reuse.
1.

From the Settings menu, select Memory Manager ➔ Card
Memory. The Card screen appears in the display listing files
in the Images folder.

2.

Press the down arrow button. The following options drop
down:
• Images

147

• Videos
• Music
3. Select the desired option. A list of all files in the related
folder appears in the display.
Files are listed by name, and each file entry shows the
name of each file.
4.

To erase files, do the following:

• Press the Erase soft key. The Select to erase screen appears in
the display.
• Select the check box for a file you want to erase to mark the file for
erasure. (Press the Select All check box to mark all files for
erasure.)
• Press the Erase soft key.
5. To move files to Phone Memory, do the following:
• Press the Move soft key. The Select to move screen appears in the
display.
• Select the check box for a file you want to move to mark the file for
removal to Phone Memory. (Press the Select All check box to mark
all files for removal.)
• Press the Move soft key.
6. Press
to return to the Memory Manager menu.

Formatting a Memory Card

Formatting a microSD Memory Card erases any data currently on
the card and creates multimedia directories compatible with your
phone. To format a Memory Card, do the following:
1.

From the Settings menu, select Memory Manager ➔ Card

2.

Press the Format soft key. You are prompted to confirm

Memory. The Card screen appears in the display.
formatting of the Memory Card.
3.

To format the Memory Card, press Yes. To return to the
Card screen without formatting the Memory Card, press
No.

Changing Your Settings

148

Section 19: Phone Info
This section explains Phone Info options that let you identify the
hardware and software versions of your phone and let you
identify the phone number assigned to your phone.

Phone Number
This option causes the Phone Number screen to appear in the
display and show the ten-digit number assigned to your phone by
your Wireless Provider.
1.

Version
You can view both the software and hardware version of your
phone using this feature. This feature is helpful if you need to
contact Customer Service.
1.

Phone Info ➔ Version.
Your phone’s hardware and software version information

In standby mode, press the Menu soft key, then select

appears in the display.

Phone Info ➔ Phone Number. The phone number assigned
by your Wireless Provider appears in the display.
2.

To return to the Phone Info menu, press

.

Icon Glossary
This option causes the Icon Glossary list to appear in the display
and show the icons that can appear in the display and the names
of the icons.
1.

In standby mode, press the Menu soft key, then select
Phone Info ➔ Icon Glossary. A list shows of the icons that
can appear on the top line of the display.

2.
149

To return to the Phone Info menu, press

.

In standby mode, press the Menu soft key, then select

2.

To return to the Phone Info menu, press

.

Section 20: Health and Safety Information
This section outlines the safety precautions associated with using
your phone. These safety precautions should be followed to safely
use your phone.

Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)

Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. government.
These FCC exposure limits are derived from the
recommendations of two expert organizations, the National
Counsel on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of

absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC.
For body worn operation, this phone has been tested and meets
FCC RF exposure guidelines when used with an accessory that
Health and Safety Information

150

contains no metal and that positions the handset a minimum of
1.5 cm from the body.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
• CDMA:
– Head: 1.04 W/Kg.
– Body-worn: 0.656 W/Kg.
• PCS:
– Head: 0.803 W/Kg.
– Body-worn: 0.716 W/Kg.
SAR information on this and other model phones can be viewed
online at http://www.fcc.gov/oet/ea. To find information that
pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
151

phone. Additional product specific SAR information can also be
obtained at www.fcc.gov/cgb/sar.

Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile phones and genuine
Samsung accessories.
Go to: https://fun.samsungmobileusa.com/recycling/index.jsp for more
information.

UL Certified Travel Adapter
The Travel Adapter for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY
DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS

INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.

Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a
series of Questions and Answers for consumers relating to radio
frequency (RF) exposure from wireless phones. The FDA
publication includes the following information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called "cell," "mobile," or
"PCS" phones. These types of wireless phones can expose the
user to measurable radio frequency energy (RF) because of the
short distance between the phone and the user's head. These RF
exposures are limited by Federal Communications Commission
safety guidelines that were developed with the advice of FDA and
other federal health and safety agencies.
When the phone is located at greater distances from the user, the
exposure to RF is drastically lower because a person's RF
exposure decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at
far lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.

Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radio frequency energy (RF) in
the microwave range while being used. They also emit very low
levels of RF when in the stand-by mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research. In some
cases, other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiationemitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level
that is hazardous to the user. In such a case, FDA could require
the manufacturers of wireless phones to notify users of the
Health and Safety Information

152

health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory
actions, FDA has urged the wireless phone industry to take a
number of steps, including the following:
• Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
• Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
• Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human
health.
FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency
working group activities, as well.
153

FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. FCC relies on FDA and other
health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF
exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless
phones.
Base stations are thus not the primary subject of the safety
questions discussed in this document.
What are the results of the research done already?
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of radio
frequency energy (RF) exposures characteristic of wireless
phones have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many of
the studies that showed increased tumor development used
animals that had been genetically engineered or treated with

cancer-causing chemicals so as to be pre-disposed to develop
cancer in absence of RF exposure. Other studies exposed the
animals to RF for up to 22 hours per day. These conditions are
not similar to the conditions under which people use wireless
phones, so we don't know with certainty what the results of such
studies mean for human health.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
However, none of the studies can answer questions about longterm exposures, since the average period of phone use in these
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies
of people actually using wireless phones would provide some of
the data that are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large numbers of
animals would be needed to provide reliable proof of a cancer
promoting effect if one exists. Epidemiological studies can

provide data that is directly applicable to human populations, but
ten or more years' follow-up may be needed to provide answers
about some health effects, such as cancer.
This is because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if they do may be many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at which the
phone is held, or which model of phone is used.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
questions about the effects of exposure to radio frequency
energy (RF).
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields (EMF) Project
since its inception in 1996. An influential result of this work has
been the development of a detailed agenda of research needs
that has driven the establishment of new research programs
around the world. The Project has also helped develop a series of
public information documents on EMF issues.
Health and Safety Information

154

FDA and Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety.
FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations.
CTIA-funded research is conducted through contracts to
independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The
CRADA will also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not
know that there is - it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
• If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the source
of the RF, since the exposure level drops off dramatically with distance.
For example, you could use a headset and carry the wireless phone
155

away from your body or use a wireless phone connected to a remote
antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless phone
use.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want to
take steps to lower exposure to radio frequency energy (RF), the
measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and the
RF source will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless phones
at all. For example, the government in the United Kingdom
distributed leaflets containing such a recommendation in
December 2000.
They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to
limit wireless phone use by children was strictly precautionary; it

was not based on scientific evidence that any health hazard
exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that handsfree kits reduce risks. Hands-free kits can be used with wireless
phones for convenience and comfort. These systems reduce the
absorption of RF energy in the head because the phone, which is
the source of the RF emissions, will not be placed against the
head. On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones marketed in
the U.S. are required to meet safety requirements regardless of
whether they are used against the head or against the body.
Either configuration should result in compliance with the safety
limit.
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those emissions
reduce risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing

more than a metallic accessory attached to the phone. Studies
have shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold devices that
claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims.
According to FTC, these defendants lacked a reasonable basis to
substantiate their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, FDA helped
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Advancement of Medical instrumentation (AAMI). The final draft,
a joint effort by FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI. FDA has tested
Health and Safety Information

156

wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance
requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a compatible phone and
a compatible hearing aid at the same time. This standard was
approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful
interference be found to occur, FDA will conduct testing to assess
the interference and work to resolve the problem.
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(Updated 12/1/2006):
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/index.html
• National Institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/homepage.html
• World Health Organization (WHO):
http://www.who.int/peh-emf/
157

• International Commission on Non-Ionizing Radiation Protection:

http://www.icnirp.de
• National Radiation Protection Board (UK):

http://www.hpa.org.uk/radiation
• US Food and Drug Administration:

http://www.fda.gov/cellphones

Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of wireless
phones, one that every user must uphold.
When driving a car, driving is your first responsibility. When using
your wireless phone behind the wheel of a car, practice good
common sense and remember the following tips:
1.

Get to know your wireless phone and its features, such as
speed dial and redial. If available, these features help you
to place your call without taking your attention off the road.

2.

When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.

3.

Position your wireless phone within easy reach. Be able to

7.

may be distracting. Make people you are talking with

from the road. If you get an incoming call at an

aware you are driving and suspend conversations that

inconvenient time, let your voice mail answer it for you.
4.

Let the person you are speaking with know you are driving;

have the potential to divert your attention from the road.
8.

if necessary, suspend the call in heavy traffic or hazardous
traffic can be hazardous.

or medical emergencies.
9.

Use your wireless phone to help others in emergencies. If

Do not take notes or look up phone numbers while driving.

you see an auto accident, crime in progress or other

Jotting down a "to do" list or flipping through your address

serious emergency where lives are in danger, call 9-1-1 or

book takes attention away from your primary

other local emergency number, as you would want others

responsibility, driving safely.
6.

Use your wireless phone to call for help. Dial 9-1-1 or other
local emergency number in the case of fire, traffic accident

weather conditions. Rain, sleet, snow, ice and even heavy
5.

Do not engage in stressful or emotional conversations that

access your wireless phone without removing your eyes

Dial sensibly and assess the traffic; if possible, place calls

to do for you.
10. Call roadside assistance or a special non-emergency

when you are not moving or before pulling into traffic. Try

wireless assistance number when necessary. If you see a

to plan calls when your car will be stationary. If you need to

broken-down vehicle posing no serious hazard, a broken

make a call while moving, dial only a few numbers, check

traffic signal, a minor traffic accident where no one

the road and your mirrors, then continue.

appears injured, or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency
number.

Health and Safety Information

158

"The wireless industry reminds you to use your phone safely when
driving."
For more information, please call 1-888-901-SAFE, or visit our
web-site www.ctia.org.
Important!: If you are using a handset other than a standard numeric keypad,
please call 1-888-901-7233.

Provided by the Cellular Telecommunications & Internet
Association.

Responsible Listening
Caution!: Avoid potential hearing loss.

Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations. Prolonged exposure to
loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that
using portable audio devices, such as portable music players and
cellular telephones, at high volume settings for long durations
may lead to permanent noise-induced hearing loss. This includes
the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices). Exposure to very loud sound
has also been associated in some studies with tinnitus (a ringing
in the ear), hypersensitivity to sound and distorted hearing.
159

Individual susceptibility to noise-induced hearing loss and
potential hearing problem varies. Additionally, the amount of
sound produced by a portable audio device varies depending on
the nature of the sound, the device settings, and the headphones
that are used. As a result, there is no single volume setting that is
appropriate for everyone or for every combination of sound,
settings and equipment.
You should follow some commonsense recommendations when
using any portable audio device:
• Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
• When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear
what you are listening to.
• Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, you
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
• Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.

• Avoid using headphones after exposure to extremely loud noises, such

as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
• Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech or experience
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
You can obtain additional information on this subject from the
following sources:

National Institute on Deafness and Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Voice: (301) 496-7243
Email: nidcdinfo@nih.gov
Internet: http://www.cdc.gov/niosh/topics/noise/default.html
National Institute for Occupational Safety and Health

American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Email: info@audiology.org
Internet: http://www.audiology.org

Hubert H. Humphrey Bldg.
200 Independence Ave., SW
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4647)
Internet: http://www.cdc.gov/niosh/topics/noise/default.html

Operating Environment
Remember to follow any special regulations in force in any area
and always switch your phone off whenever it is forbidden to use
it, or when it may cause interference or danger.
When connecting the phone or any accessory to another device,
read its user's guide for detailed safety instructions. Do not
connect incompatible products.
Health and Safety Information

160

As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating position
(held to your ear with the antenna pointing over your shoulder if
you are using an external antenna).

Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
phone. Consult the manufacturer to discuss alternatives.
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained
between a handheld wireless phone and an implantable medical
device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
Persons who have such devices:
• Should ALWAYS keep the phone more than six (6) inches from their
implantable medical device when the phone is turned ON;
• Should not carry the phone in a breast pocket;
• Should use the ear opposite the implantable medical device to
minimize the potential for interference;

161

• Should turn the phone OFF immediately if there is any reason to

suspect that interference is taking place;
• Should read and follow the directions from the manufacturer of your

implantable medical device. If you have any questions about using
your wireless phone with such a device, consult your health care
provider.
For more information see:
http://www.fcc.gov/oet/rfsafety/rf-faqs.html

FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the
exception of wireless phones under the Hearing Aid Compatibility
Act of 1988 (HAC Act) to require digital wireless phones be
compatible with hearing-aids.
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities.
While some wireless phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a
buzzing, humming, or whining noise. Some hearing devices are
more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.

The wireless telephone industry has developed a rating system
for wireless phones, to assist hearing device users find phones
that may be compatible with their hearing devices. Not all phones
have been rated. Phones that are rated have the rating on their
box or a label located on the box.
The ratings are not guarantees. Results will vary depending on
the user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your personal
needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and
are likely to generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of the two
ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are
likely to generate less interference to hearing devices than
phones that are not labeled. T4 is the better/higher of the two
ratings.
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find
this rating. Higher ratings mean that the hearing device is
relatively immune to interference noise. The hearing aid and
wireless phone rating values are then added together. A sum of 5

is considered acceptable for normal use. A sum of 6 is
considered for best use.

M3

+

M2

=

5

T3

+

T2

=

5

In the above example, if a hearing aid meets the M2 level rating
and the wireless phone meets the M3 level rating, the sum of the
two values equal M5. This is synonymous for T ratings. This
should provide the hearing aid user with "normal usage" while
using their hearing aid with the particular wireless phone.
"Normal usage" in this context is defined as a signal quality that
is acceptable for normal operation.
The M mark is intended to be synonymous with the U mark. The
T mark is intended to be synonymous with the UT mark. The M
and T marks are recommended by the Alliance for
Telecommunications Industries Solutions (ATIS). The U and UT
marks are referenced in Section 20.19 of the FCC Rules.

Health and Safety Information

162

The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your phone off in
health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require
you to do so.

163

Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
in such areas could cause an explosion or fire resulting in bodily
injury or even death.
Users are advised to switch the phone off while at a refueling
point (service station). Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants or where blasting
operations are in progress.
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.

Emergency Calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as userprogrammed functions, which cannot guarantee connection in all
conditions. Therefore, you should never rely solely on any
wireless phone for essential communications (medical
emergencies, for example).

Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.

Restricting Children's access to your Phone

To make an emergency call:

FCC Notice

1.

If the phone is not on, switch it on.

2.

Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.

3.

Press the

key.

If certain features are in use (call barring, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult this document and your local cellular
service provider.
When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember that
your phone may be the only means of communication at the
scene of an accident; do not cut off the call until given
permission to do so.

Your phone is not a toy. Children should not be allowed to play
with it because they could hurt themselves and others, damage
the phone or make calls that increase your phone bill.

FCC Notice and Cautions
The phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to
stop using the phone if such interference cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection Standard
(NFPA-58). For a copy of this standard, contact the National Fire
Protection Association, One Batterymarch Park, Quincy, MA
02269, Attn: Publication Sales Division.
Cautions
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this equipment.
Only use approved batteries, antennas and chargers. The use of
any unauthorized accessories may be dangerous and void the
phone warranty if said accessories cause damage or a defect to
the phone.
Health and Safety Information

164

Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending
or sitting on it.

Other Important Safety Information
• Only qualified personnel should service the phone or install the phone

in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty applicable to the device.
• Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive materials in
the same compartment as the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both installed
or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
• Switch your phone off before boarding an aircraft. The use of wireless
phone in aircraft is illegal and may be dangerous to the aircraft's
operation.
• Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.

165

Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the
signal strength in your area. Your phone informs you of the
current signal strength by displaying a number of bars next to the
signal strength icon. The more bars displayed, the stronger the
signal.
If you're inside a building, being near a window may give you
better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after searching, a Power
Save feature is automatically activated. If your phone is active, it
periodically rechecks service availability or you can check it
yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays
on the screen. When a signal is found, your phone returns to
standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's
turned on, it receives and transmits radio frequency (RF) signals.
When you use your phone, the system handling your call controls
the power level. This power can range from 0.006 watts to 0.2
watts in digital mode.

Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized personnel should
service your phone and accessories. Faulty service may void the
warranty.
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
• To ensure that the Hearing Aid Compatibility rating for your phone is
maintained, secondary transmitters such as Bluetooth and WLAN
components must be disabled during a call. For more information,
refer to “Bluetooth” on page 113.
• If your phone is equipped with an external antenna, hold the phone
with the antenna raised, fully-extended and over your shoulder.
• Do not hold, bend or twist the phone's antenna, if applicable.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing the
internal antenna could inhibit call performance.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid spills. If
your phone does get wet, immediately turn the power off and remove
the battery. If it is inoperable, call Customer Care for service.

Availability of Various Features/Ring Tones
Many services and features are network dependent and may
require additional subscription and/or usage charges. Not all

features are available for purchase or use in all areas.
Downloadable Ring Tones may be available at an additional cost.
Other conditions and restrictions may apply. See your service
provider for additional information.

Battery Standby and Talk Time
Standby and talk times will vary depending on phone usage
patterns and conditions. Battery power consumption depends on
factors such as network configuration, signal strength, operating
temperature, features selected, frequency of calls, and voice,
data, and other application usage patterns.

Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard

surface, can potentially cause damage to the phone and battery. If you
suspect damage to the phone or battery, take it to a service center for
inspection.
• Never use any charger or battery that is damaged in any way.
• Do not modify or remanufacture the battery as this could result in
serious safety hazards.
• If you use the phone near the network's base station, it uses less
power; talk and standby time are greatly affected by the signal
strength on the cellular network and the parameters set by the
network operator.
• Follow battery usage, storage and charging guidelines found in the
user’s guide.
Health and Safety Information

166

• Battery charging time depends on the remaining battery charge and

the type of battery and charger used. The battery can be charged and
discharged hundreds of times, but it will gradually wear out. When the
operation time (talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
• If left unused, a fully charged battery will discharge itself over time.
• Use only Samsung-approved batteries and recharge your battery only
with Samsung-approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave the battery
connected to a charger for more than a week, since overcharging may
shorten its life.
• Do not use incompatible cell phone batteries and chargers. Some Web
sites and second-hand dealers, not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier recommended products and accessories. If
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
• Misuse or use of incompatible phones, batteries, and charging devices
could result in damage to the equipment and a possible risk of fire,
explosion, leakage, or other serious hazard.
• Extreme temperatures will affect the charging capacity of your battery:
it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity and
167

lifetime of the battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery may temporarily not
work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below
0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as on or
near a cooking surface, cooking appliance, iron, or radiator.
• Do not get your phone or battery wet. Even though they will dry and
appear to operate normally, the circuitry could slowly corrode and
pose a safety hazard.
• Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object (coin, clip or pen) causes a direct connection
between the + and - terminals of the battery (metal strips on the
battery), for example when you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may damage the battery or the
object causing the short-circuiting.
• Do not permit a battery out of the phone to come in contact with metal
objects, such as coins, keys or jewelry.
• Do not crush, puncture or put a high degree of pressure on the battery
as this can cause an internal short-circuit, resulting in overheating.
• Dispose of used batteries in accordance with local regulations. In some
areas, the disposal of batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion batteries, contact your
nearest Samsung authorized service center. Always recycle. Do not
dispose of batteries in a fire.

Care and Maintenance
Your phone is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will help
you fulfill any warranty obligations and allow you to enjoy this
product for many years.
• Keep the phone and all its parts and accessories out of the reach of
small children.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an electric
shock to you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its moving parts
may be damaged.
• Do not store the phone in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt certain
plastics.
• Do not store the phone in cold areas. When the phone warms up to its
normal operating temperature, moisture can form inside the phone,
which may damage the phone's electronic circuit boards.
• Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong detergents to
clean the phone. Wipe it with a soft cloth slightly dampened in a mild
soap-and-water solution.

• Do not paint the phone. Paint can clog the device's moving parts and

prevent proper operation.
• Do not put the phone in or on heating devices, such as a microwave

oven, a stove or a radiator. The phone may explode when overheated.
• If your phone is equipped with an external antenna, use only the

supplied or an approved replacement antenna. Unauthorized antennas
or modified accessories may damage the phone and violate
regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there
will assist you, and if necessary, arrange for service.

Health and Safety Information

168

Section 21: Warranty Information
Standard Limited Warranty
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants to the original purchaser ("Purchaser") that SAMSUNG's
Phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
Phone

1 Year

Batteries

1 Year

Leather Case

90 Days

Holster

90 Days

Other Phone Accessories

1 Year

What is Not Covered? This Limited Warranty is conditioned upon
proper use of Product by Purchaser. This Limited Warranty does
not cover: (a) defects or damage resulting from accident, misuse,
abuse, neglect, unusual physical, electrical or electromechanical
stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number
169

removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged due to
normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral
equipment not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance, and
service of Product, or (g) Product used or purchased outside the
United States or Canada.
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery has
been charged by a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the seals on the
battery are broken or show evidence of tampering, or (iii) the
battery has been used in equipment other than the SAMSUNG
phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component
part of Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone service

facility in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof of sale
showing the date of purchase, the serial number of Product and
the sellers' name and address. To obtain assistance on where to
deliver the Product, call Samsung Customer Care at 1-888-9874357. Upon receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases,
pouches and holsters will be warranted for a period of ninety (90)
days. All other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited Warranty on
the original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment shall
become the property of SAMSUNG.
If SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY

OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
• WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE
Warranty Information

170

OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT
171

IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing
reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make additional
warranties binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation, whether
oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.

Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
default settings. Please contact the Samsung Customer Care
Center for details.
Important!: Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.

Samsung Telecommunications America, LLC:
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
Important!: If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.

Phone: 1-888-987-HELP (4357)
©2008 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.

Customer Care Center:
1000 Klein St.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)

Warranty Information

172

Index
A
Accessing Your Phone’s Tools 109
Airplane Mode 138
Alarm Clock 119
Set an Alarm 119
Turn Off the Alarm 120
When an Alarm Sounds 120
Alltel Shop
Settings 71
Alltel Web
How Alltel Web Keys Work 74
Using Links 74
Axcess Web
Launching Axcess Web 73
Using Axcess Web 73

B
Battery
Charging 4
Low Battery Indicator 5
Removal 6
Travel Adapter 5
Bluetooth
Add New Device 114
173

Settings 116
Turn On/Off 113

C
Calculator 123
Calendar 116
Call Functions
Adjusting the Call Volume 25
Answering a Call 24
Call Log 25
Making a Call — Contact
Dialing 21
Making a Call — Number Entry
Dialing 20
Making a Call — Speed
Dialing 22
Making a Call — Voice
Dialing 23
Call Settings
Auto Answer 136
Auto Retry 137
Call Alert 136
Call Answer 136
Data Settings 138

Camcorder
Color Effects 91
Options 88
Screen Icons 81
Taking Videos 77
Camcorder mode 18
Camera
Brightness 85 90
Options 82
Photo Gallery 93
Save Pictures 82
Screen Icons 79
Shooting Mode 83
Taking Pictures 77
Camera mode 18
Camera Options
Size 84 89
Card Memory
Formatting 148
Management 147
Change Text Entry Modes 52
Contacts List
Calling a Contact 21

,

,

Open 36
Converters 125
Creating and Sending New Messages
Picture (Pic) Message 58
Text Message 56
Video Message 60

F
Favorites
see Speed Dial 44
File Save Options 146
Formatting a Memory Card 148
Formatting a microSD Card 148

D
Display Settings
Backlight 132
Banner 132
Menu Style 130
Wallpaper 131

E
easyedgeSM
Help 71
E-Mail
Launching 70
Emergency Calls 20
Entering Text 49
Entering Numbers 54
Entering Symbols 54
Using T9 Mode 53
Erase voice memos 108
Exit Alltel Web 73

G
Gallery, photo 93
Getting Started
Activating Your Phone 5
Understanding this User Manual

4
Voicemail 7

H
HAC 161
Handwriting Recognition 50
Health and Safety Information 150

I
Icon Glossary 149
Image Shuffle
Wallpaper 131
In-Use Menu 34

K
Key Tone 135

L
Language 138
Lock Mode 15

M
Making a Call
Contact Dialing 21
Number Entry Dialing 20
Speed Dialing 22
Voice Dialing 23
Melody Shuffle
Ringer Type 134
Memo Pad 118
Memory Card
Formatting 148
Installing 8
Removing 8
Menu Navigation
In-Use Options 34
Return to Previous Menu 33
Message Folders
Drafts folder 66
Inbox 65
Messages and Lock Mode 65
Outbox 66
Voicemail 67
174

Message Send Options 62
Message Setting 68
Messaging
Erasing Messages 67
Message Settings 68
microSD
Formatting 148
Installing 8
Removing 8
Mode
Camcorder 18
Camera 18
M-Ratings 162
Multimedia 102
Music Player 97

N
NAM selection 143
Notes and tips 4
Notes, description 4
Number Entry Dialing 20

P
Personal Organizer
Voice Memo 107
Phone
Command Keys 12
175

Display Screen 14
Display Screen Icons 14
Features 9
Modes 15
View, Front 11
View, Side 9
Phone Info
Icon Glossary 149
Phone Number 149
Version 149
Phone Memory
Usage Info 145
Phone Number 149
Phone Safety 160
Phone Settings
Airplane Mode 138
Language 138
NAM selection 143
Set Time 143
System Select 143
Photos
Sending 96
Picture (Pic) Message 58
Picture Messages
Send in Camera Mode 59

Q
Quality, videos 90
QWERTY Keypad 49

R
Receiving New Messages 63
While in a Call 64
Record memos 107
Return to Previous Menu 33
Ringer Volume Setting 17
Roaming 31

S
SAR values 150
Save pictures 82
Screen Layouts 79
Security Settings
Change Lock 140
Emergency # 141
Erase Contacts 142
Lock Phone 139
Resetting Your Phone 141
Restriction 142
Set Time 143
Settings
Call Settings 136
Display 130

Phone 138
Security 139
Sound 133
Setup
Location 129
Voicemail 64
Silent Mode 17
Sound Settings
Alerts 135
Key Tone 135
Ringer Type 134
Speed Dial
Assigning 44
Changing 45
Removing 46
Speed Dialing 22
One-Touch Dialing 22
Two-Touch Dialing 22
Standard Limited Warranty 169
Standby Mode 16
Stop Watch 124

T
Taking pictures and videos 77
Text Conventions 4

Text Entry Mode 52
Changing 52
Text message 56
Text Modes
Changing 52
Tip Calculator 128
Tip, description 4
Tools
Alarm Clock 119
Bluetooth 113
Calculator 123
Calendar 116
Converter 125
Memo Pad 118
Stop Watch 124
Tip Calculator 128
World Time 121
Tools Menu
Accessing 109
T-Ratings 162
TTY Mode 137
TV on Demand
Launching 75 76

,

U
UL Certification 151
Understanding Your Contacts
Adding a New Contact Entry 36
Deleting a Contact Entry 48
Editing an Existing Contact
Entry 42
Finding a Contact Entry 40
Memory 48
Pauses 42
Using Abc Mode 54

V
Version 149
Video Message 60
Voice Dialing 23
Voice Memo 107
Record memos 107
Review memos 108
Voice Service
Command Tips 110
Commands 109
Making a Call 23
Settings 110
Voicemail
Checking 65
176

Listening To 7
Setup 64
VoiceSignal
Voice Memos 107

W
Wallpaper 131
Warranty Information 169
World Time 121

177



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Page Mode                       : UseOutlines
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2008:10:20 10:45:22Z
Creator Tool                    : FrameMaker 8.0
Modify Date                     : 2008:10:20 13:18:08-05:00
Metadata Date                   : 2008:10:20 13:18:08-05:00
Format                          : application/pdf
Creator                         : cbanks
Title                           : r800.book
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Enhanced                        : By PDF Enhancer 3.1/Win
Spdf                            : 1112
Document ID                     : uuid:639f38c0-22ee-49d0-82ea-ca6845f2c957
Instance ID                     : uuid:5b133586-d123-4dc8-b712-39f2505727bd
Page Count                      : 180
Page Layout                     : SinglePage
Author                          : cbanks
SPDF                            : 1112
EXIF Metadata provided by EXIF.tools

Navigation menu