Samsung Le40B550 Users Manual

LE46B550 to the manual 16415fbf-9016-431d-83e6-2c3d46797883

2015-01-23

: Samsung Samsung-Le40B550-Users-Manual-278912 samsung-le40b550-users-manual-278912 samsung pdf

Open the PDF directly: View PDF .
Page Count: 72

Download
Open PDF In Browser	View PDF

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

Customer Care Centre

Web Site

EIRE
U.K

0818 717 100
0845 SAMSUNG (7267864)

www.samsung.com/ie
www.samsung.com/uk

LCD TV

user manual

imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at

www.samsung.com/register
Model

Serial No.

BN68-02315G-00

BN68-02315G-01Eng-Cover.indd 1

2009-06-08 �� 11:13:56

Information on Use

English

Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen.
Do not display a still image and partially still image on the LCD panel for more than 2 hours as it can cause screen
image retention. This image retention is also known as screen burn. To avoid such image retention, reduce the degree of
brightness and contrast of the screen when displaying a still image.

Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the
left, right and centre of the screen caused by the difference of light emission on the screen.
Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
■ WARNINGS:
Image retention, commonly known as screen burn-in, can occur on most types of television if the same image is displayed continuously.
The most common causes of image retention are logos that remain stationary on the TV screen. These logos are common on many
programmes received via a Set-top Box.
To reduce this risk, avoid displaying still images for long durations and lower the brightness or contrast settings to decrease the
intensity of the picture. Extended viewing of movies and programs in aspect ratios that are different from the aspect ratio of the TV may
cause image retention. Always endeavour to avoid black borders top or bottom by using the zoom function. This will help eliminate the
black borders and fit the picture to the entire area of the screen. Using a video game console may cause image retention and is not
recommended. When using a PC input, avoid displaying still images for long durations and reduce the brightness or contrast settings to
decrease the intensity of the picture.
■ IMPORTANT:
Image retention issues are not covered by your Samsung® warranty.

Digital TV Notice
■

Functionalities related to Digital TV(DVB) are only available in countries/areas where DVB-T (MPEG2 and MPEG4 AVC)
digital terrestrial signals are broadcasted or where you are able to access to a compatible DVB-C(MPEG2 and MPEG4
AAC) cable- TV service. Please check with your local dealer the possibility to receive DVB-T or DVB-C signal.

■

DVB-T is the DVB European consortium standard for the broadcast transmission of digital terrestrial television and
DVBC is that for the broadcast transmission of digital TV over cable. However, some differentiated features like EPG
(Electric Programme Guide), VOD (Video on Demand) and so on, are not included in this specification. So, they cannot be
workable at this moment.

■

Although this TV set meets the latest DVB-T and DVB-C standards, as of [August, 2008], the compatibility with future
DVB-T digital terrestrial and DVB-C digital cable broadcasts cannot be guaranteed.

■

Depending on the countries/areas where this TV set is used some cable-TV providers may charge an additional fee for
such a service and you may be required to agree to terms and conditions of their business.

■

Some Digital TV functions might be unavailable in some countries or regions and DVB-C might not work correctly with
some cable service providers.

■

For more information, please contact your local Samsung customer care centre.

BN68-02315G-01Eng.indd 2

2009-06-08 �� 11:00:08

English

Trademark & Label License Notice
TruSurround HD, SRS and
symbol are trademarks of SRS Labs, Inc. TruSurround HD technology is
incorporated under license from SRS Labs, Inc.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of
Dolby Laboratories.

Symbol
Note
One-Touch Button
TOOLS Button
Press

BN68-02315G-01Eng.indd 3

2009-06-08 �� 11:00:08

Contents

English

Getting Started
6 Installing the Stand
6 Disconnecting the Stand
7 Installing the Wall Mount Kit
7 Assembling the Cables
7 Anti-Theft Kensington Lock
8 Securing the Installation Space
9 Securing the TV to the Wall
10 Accessories
11 Viewing the Control Panel
12 Viewing the Connection Panel
14 Connections
15 Installing Batteries in the Remote Control
16 Viewing the Remote Control

Basic Operation
17 Placing Your Television in Standby Mode
17 Plug & Play Feature
18 Viewing the Display

Using the Menus

Speaker Select
29 Sound Reset

30 Setup Menu
30

31
32
33

Menu Language
Time
Broadcast
Security
General

34 Input Menu
34 Source List
Edit Name

35 Support menu
35

Self Diagnosis
Software Upgrade
HD Connection Guide
Contact Samsung

Media Play - USB Device
37 Connecting a USB Device
38 Using the Media Play Menu
38 Using the PHOTO (JPEG) List
40 Using the MP3 List
41 Using the Setup Menu

19 Viewing the Menus
19 Channel Menu
19
20

21
22
23

Country
Auto Store
Manual Store
Now & Next Guide / Full Guide / Default Guide
Channel List
Channel Mode
Fine Tune

24 Picture Menu
24 Mode
Backlight / Contrast / Brightness / Sharpness /
Colour / Tint(G/R)
Advanced Settings
25 Picture Options
27 Picture Reset
Auto Adjustment
Screen

28 Sound Menu
28

BN68-02315G-01Eng.indd 4

Mode
Equalizer
SRS TruSurround HD
Audio Language
Audio Format
Audio Description
Auto Volume

2009-06-08 �� 11:00:08

42 Connecting Anynet+ Devices
43 Setting Up Anynet+

English

Anynet+

43 Switching between Anynet+ Devices
45 Recording
45 Listening through a Receiver (Home Theatre)
46 Troubleshooting for Anynet+

Other Information
47 Teletext Feature
48 Using Your TV as a Computer (PC) Display
49 Troubleshooting: Before Contacting Service
Personnel
50 Specifications
Warning! Important Safety Instructions
Wiring the Mains Power Supply Plug (UK Only)
Warranty Card

BN68-02315G-01Eng.indd 5

2009-06-08 �� 11:00:08

English

Getting Started
Installing the Stand

Getting Started

Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws. Applicable to 32inch models only.

Attach your LCD TV to the stand.
■ Two or more people should carry the TV.
■ Make sure to distinguish between the front and back of the stand when assembling
them.
■ To make sure the TV is installed on the stand at a proper level, do not apply excess
downward pressure to the upper left of right sides of the TV.

Back

Front

Fasten screws at position 1 and then fasten screws at position 2.
■ Stand the product up and fasten the screws. If you fasten the screws with the LCD
TV placed down, it may lean to one side.
■ The stand is installed for models with the screen size of 37 inch and above.

Disconnecting the Stand
1
2

Remove screws from the back of the TV.

Cover the bottom hole with the cover.

Separate the stand from the TV.
■ Two or more people should carry the TV.

BN68-02315G-01Eng.indd 6

2009-06-08 �� 11:00:12

Installi������������������
ng the �����������
Wall Mount ���
Kit

English

Wall mount items (sold separately) allow you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the Wall
Mount items. Contact a technician for assistance when installing the wall mounted bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or
others if you elect to install the TV on your own.

Getting Started

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal
injury due to electric shock.
Remove the stand and cover the bottom hole with a cap and fasten with two screws.

Assembling the Cables
Enclose the cables in the Holder-Wire Cable so that the cables are not visible through the
transparent stand.

Anti-Theft Kensington Lock
The Kensington Lock is a device used to physically fix the system when using it in a public place.
The appearance and locking method may differ from the illustration depending on the manufacturer.
Refer to the manual provided with the Kensington Lock for proper use.
■ The locking device has to be purchased separately.
■ The location of the Kensington Lock may be different depending on its model.

1
2
3

Insert the locking device into the Kensington slot on the LCD TV (1) and turn it in the
locking direction (2).

3
2
1

Connect the Kensington Lock cable (3).
Fix the Kensington Lock to a desk or a heavy stationary object.

BN68-02315G-01Eng.indd 7

2009-06-08 �� 11:00:15

Securing the Installation Space

English
Getting Started

Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
Install the product so the required distances shown in the figure are kept.
■ When using a stand or wall-mount, use parts provided by Samsung Electronics only.
If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
If you use parts provided by another manufacturer, it may result in a problem with the product or fire due to an increase in the internal
temperature of the product due to poor ventilation.
■ The appearance may differ depending on the product.

When installing the product with a stand

When installing the product with a wall-mount

10 cm

BN68-02315G-01Eng.indd 8

2009-06-08 �� 11:00:15

Securing the TV to the Wall

Getting Started

English

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In
particular, ensure your children do not hang over or destabilize the TV; doing
so may cause the TV to tip over, causing serious injuries or death. For added
stability, install the anti-fall device for safety purposes, as follows.

To avoid the TV from falling:
Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the
screws have been firmly installed onto the wall.
■ You may need additional material such as an anchor depending on the type of
wall.
■ Since the necessary clamps, screws, and string are not supplied, please
purchase these additionally.
Wall

Remove the screws from the centre back of the TV, put the screws into the clamps,
and then fasten the screws onto the TV again.
■ Screws may not be supplied with the product. In this case, please purchase the
screws of the following specifications.
■ Screw Specifications:
For a 17 ~ 29 Inch LCD TV: M4 X L15
For a 32 ~ 40 Inch LCD TV: M6 X L15

Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong
string and then tie the string tightly.
■ Install the TV near to the wall so that it does not fall backwards.
■ It is safe to connect the string so that the clamps fixed on the wall are equal to or
lower than the clamps fixed on the TV.
■ Untie the string before moving the TV.

Wall

Verify all connections are properly secured. Periodically check connections for any
sign of fatigue for failure. If you have any doubt about the security of your connections,
contact a professional installer.

BN68-02315G-01Eng.indd 9

2009-06-08 �� 11:00:16

Accessories

English

■

Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.

Getting Started

Remote Control & Batteries
(AAA x 2)

Power Cords

User Manual

Stand Screw X 4
(Depending on the model)

Cover-Bottom

Cleaning Cloth

(M4 X L16)

Holder-Wire Cable
(Depending on the model)

■ The items colour and shape may vary depending on the model.
■ Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice in order to enhance product performance.

BN68-02315G-01Eng.indd 10

2009-06-08 �� 11:00:17

Viewing the Control Panel

The product colour and shape may vary depending on the model.
The front panel buttons can be activated by touching it with your finger.

English

■
■

Speakers

Aim the remote
control towards
this spot on the
TV.

Getting Started

Toggles between all the available input sources.
In the on-screen menu, use this button as you
would use the ENTERE button on the remote
control.
Press to see an on-screen menu of your
TV’s features.
Press to increase or decrease the volume.
In the on-screen menu, use the Y
buttons as you would use the ◄ and ►
buttons on the remote control.
Press to change channels.
In the on-screen menu, use the z
buttons as you would use the ▼ and ▲
buttons on the remote control.
Blinks and turns off when the power is on
and lights up in stand-by mode.
Press to turn the TV on and off.

BN68-02315G-01Eng.indd 11

2009-06-08 �� 11:00:18

Viewing the Connection Panel

English

■

The product colour and shape may vary depending on the model.

Getting Started

2
@

!
2
!

0
9

COMPONENT IN
Connects Component video / audio.
HDMI IN 1, 2, 3(DVI), 4 / DVI AUDIO IN
Connects to the HDMI jack of a device with an HDMI output.
■ No sound connection is needed for an HDMI to HDMI connection.
■ HDMI cables that are not 1.3 may cause annoying flicker or no screen display.
■ What is HDMI?
HDMI(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video
signals using a single cable.
The difference between HDMI and DVI is that the HDMI device is smaller than DVI’s one.
■ The TV may not output sound and pictures may be displayed with abnormal colour when DVD / Blu-ray player / Cable Box
/ Satellite receiver (Set-Top Box) supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI
cable and there is no sound, connect the HDMI cable to the HDMI IN 3(DVI) jack and the audio cables to the DVI AUDIO IN
jacks on the back of the TV. If this happens, contact the company that provided the DVD / Blu-ray player / Cable Box / Satellite
receiver (Set-Top Box) to confirm the HDMI version, then request an upgrade.
■ Use the HDMI IN 3(DVI) jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter (DVI
to HDMI) for video connection and the DVI AUDIO IN jacks for audio. When using an HDMI / DVI cable connection, you must
use the HDMI IN 3(DVI) jack.
■ HDMI cables that are not 1.3 may cause annoying flicker or no screen display.
3 PC IN [PC] / [AUDIO]

Connects to the video and audio output jacks on your PC.
■ If your PC supports an HDMI connection, you can connect this to the HDMI IN 1, 2, 3(DVI) or 4 terminal.
■ If your PC supports a DVI connection, you can connect this to the HDMI IN 3(DVI) / DVI AUDIO IN terminal.
4 ANT IN

Connects to an antenna or cable TV system.
5 KENSINGTON LOCK (depending on the model)

The Kensington Lock (optional) is a device used to physically fix the system when used in a public place. If you want to use a
locking device, contact the dealer where you purchased the TV.
■ The location of the Kensington Lock may be different depending on its model.
1

BN68-02315G-01Eng.indd 12

2009-06-08 �� 11:00:19

EXT 1
EXT 2
0

Video
O
O

Input
Audio (L / R)
O
O

RGB
O
X

Getting Started

Connector

13
English

6 H(HEADPHONE)
Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from
the built-in speakers will be disabled.
■ Using the sound function is restricted when connecting headphones to the TV.
■ Prolonged use of headphones at a high volume may damage your hearing.
■ You will not hear sound from the speakers when you connect headphones to the TV.
■ The headphone volume and TV volume are adjusted separately.
7 DIGITAL AUDIO OUT (OPTICAL)

Connects to a Digital Audio component such as a Home theatre receiver.
■ When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack: Decrease the volume of the TV and
adjust the volume level with the system’s volume control.
■ 5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
■ When the receiver (home theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a
DTV(air) signal, the TV will send out 5.1 channel sound to the Home theatre receiver. When the source is a digital component such
as a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) and is connected to the TV via HDMI, only 2 channel sound
will be heard from the Home Theatre receiver. If you want to hear 5.1 channel audio, connect the digital audio out jack on DVD /
Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) directly to an Amplifier or Home Theatre, not the TV.
8 AUDIO OUT [R-AUDIO-L]

Connects to the audio input jacks on your Amplifier/Home theatre.

When an audio amplifier is connected to the AUDIO OUT [R-AUDIO-L] jacks: Decrease the volume of the TV and adjust the
volume level with the Amplifier’s volume control.
9 EXT1, 2

Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.
T Mo��������������������������������������������������
de, DTV Out supports MPEG SD Video and Audio only.
■ In EX������������������������������������������������������
■ Input/Output Specification
Output
Video + Audio (L / R)
Only TV or DTV output is available.
Output you can choose.

AV IN [VIDEO] / [R-AUDIO-L]
Video and audio inputs for external devices, such as a camcorder or VCR.
USB
Connector for software upgrades and Media Play, etc.
COMMON INTERFACE Slot
When not inserting ‘CI CARD’ in some channels, ‘Scrambled Signal’ is displayed on the screen.
The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in
about 2~3 minutes. If an error message is displayed, please contact your service provider.
When the channel information configuration has finished, the message ‘Updating Completed’ is displayed, indicating
that
the channel list is now updated.
■ You must obtain a CI CARD from a local cable service provider. Remove the CI CARD by carefully pulling it out with your
■ hands since dropping the CI CARD may cause damage to it.
■ Insert the CI-Card in the direction marked on it.
■ The place of the COMMON INTERFACE Slot may be different depending on its model.
■ CAM is not supported in some countries and regions, check with your authorized dealer.

BN68-02315G-01Eng.indd 13

2009-06-08 �� 11:00:19

Connections

English

Best

OPTICAL (Digital)

Analog Audio connection

Normal

Getting Started

Using a Audio Cable
AUDIO (Analog)

Amplifier / DVD Home Theater
AUDIO IN

Digital Audio connection

Using an Optical Cable
Digital Audio System
OPTICAL

HD connection

Using
a D-Sub
Using an
HDMI Cable
Cable
HDMI OUT

HD connection

Using
D-Sub Cable
Using
anaHDMI/DVI
Cable
AUDIO OUT

DVI OUT

Using
Cable
Using a
a D-Sub
D-Sub Cable
AUDIO OUT

BN68-02315G-01Eng.indd 14

PC OUT

2009-06-08 �� 11:00:20

Installing Batteries in the Remote Control

Replace the cover.
■ Remove the batteries and store them in a cool, dry place if you won’t be using
the remote control for a long time. (Assuming typical TV usage, the batteries
should last for about one year.)
■ If the remote control doesn’t work, check the following:
Is the TV power on?
Are the plus and minus ends of the batteries reversed?
Are the batteries drained?
Is there a power outage or is the power cord unplugged?
Is there a special fluorescent light or neon sign nearby?

Install two AAA size batteries.
■ Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside
the compartment.

Getting Started

Lift the cover at the back of the remote control upward as shown in the figure.

English

1
2

BN68-02315G-01Eng.indd 15

2009-06-08 �� 11:00:21

Viewing the Remote Control

English

■
■
■

You can use the remote control up to a distance of about 23 feet from the TV.
The performance of the remote control may be affected by bright light.
The product colour and shape may vary depending on the model.

Getting Started

Selects the TV mode directly.
(p. 34, 47)

Turns the TV on and off.
Press to change the channel.

Used to display Favourites
channel Lists on the screen.
(p. 22)

Enables you to return to the
previous channel you were
watching.
Press to change channels.

Press to increase or decrease
the volume.

Press to temporarily cut off the
sound. (p. 35)
Press to display and select the
available video sources. (p. 34)

Press to display information
on the TV screen. (p. 18)
Displays the main on-screen
menu. (p. 19)

Displays the Electronic
Programme Guide (EPG).
(p. 21)

Use to quickly select frequently
used functions.
Use to select on-screen menu
items and change menu values.
(p. 19)

Returns to the previous menu.
Press to exit the menu. (p. 19)
Use these buttons in the
Channel list, Media Play menu,
etc.

Displays the Channel List on
screen. (p. 22)
Alternately select Teletext,
Double, or Mix. (p. 47)

Allows you to play music files
and pictures. (p. 47)

Sound effect selection.
(p. 29)

Picture size selection. (p. 26)
Displays the Digital subtitle.
(p. 31)

Use these buttons in the Media
Play and Anynet+ modes. (∏:
This remote can be used to control
recording on Samsung recorders
with the Anynet+ feature)

Audio Description selection.
(p. 28)

Teletext Functions (������
p. 47)
0

Teletext mode selection
(LIST / FLOF)
Teletext store

8
Teletext size selection
4
Colour buttons Fastext topic selection

BN68-02315G-01Eng.indd 16

Teletext reveal

Teletext previous page

Exit from the Teletext display

Teletext index

Teletext sub page

Teletext hold

Teletext next page

Teletext cancel

2009-06-08 �� 11:00:21

Basic Operation

17
English

Placing Your Television in Standby Mode
1
2

Press the POWERP button on the remote control.
■ The screen is turned off and a standby indicator appears on your set.
To switch your set back on, simply press the POWERP button again.
■ Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example). It is best to
unplug the set from the mains and aerial.

Basic Operation

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when
you wish to interrupt viewing temporarily (during a meal, for example).

Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and
subsequently.

1
2
3
4
5
6

7
8
9

Press the POWERP button.
■ You can also use the POWERP button on the TV.
■ The message Select the OSD Language. is displayed.
Press the ENTERE button. Select the appropriate language by pressing the
▲ or ▼ button. Press the ENTERE button to confirm your choice.
Press the ◄ or ► button to select Store Demo or Home Use, then the
ENTERE button.
■ We recommend setting the TV to Home Use mode for the best picture in your
home environment.
■ Store Demo mode is only intended for use in retail environments.
■ If the unit is accidentally set to Store Demo mode and you want to return to
Home Use (Standard)�����������������������������������������������������
: Press the volume button on the TV. When the volume
OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
Press the ENTERE button. Select the appropriate country by pressing the
▲ or ▼ button. Press the ENTERE button to confirm your choice.
Press the ▲ or ▼ button to select Air or Cable, then press the ENTERE button.
■ Air: Air ���������������
antenna signal.
Cable antenna signal.
■ Cable:����������������������
Press the ▲ or ▼ button to select the channel source to memorize.
Press the ENTERE button to select Start.
g the antenna source to Cable, a step appears allowing you to
■ When settin������������������������
set a value for the digital channel search. For more info������������������������
rmation, refer to pages
19~20.
■ Digital & Analogue: Digital and Analogue channels.
■ Digital: Digital channels.
■ Analogue: Analogue channels.
■ The channel search will start and end automatically.
■ After all the available channels are stored, the message Set the Clock Mode.
is displayed.

Plug & Play
Select the OSD Language.
Menu Language

: English

▶

E Enter

■ Press the ENTERE button
at any
��������������������������
time to interrupt the
memorization process.

Press the ENTERE button. Press the ▲ or ▼ button to select Auto, then press
the ENTERE button.
■ If you select Manual, Set current date and time is displayed.
■ If you have received a digital signal, the time will be set automatically. If not,
select Manual to set the clock.
The description for the connection method providing the best HD screen quality is
displayed. Check the description and press the ENTERE button.
The message Enjoy your TV. is displayed. When you have finished, press the
ENTERE button.

BN68-02315G-01Eng.indd 17

2009-06-08 �� 11:00:21

English
Basic Operation

1
2
3

Press the MENU button.
Press the ▲ or ▼ button to select Setup, then press the ENTERE button.

Setup

If you want to reset this feature...
Plug & Play
Menu Language
Time
Broadcast
Security
General

Press the ENTERE button again to select Plug & Play.
Enter your 4 digit PIN number.
■ The default PIN number of a ������������������������
new���������������������
TV set is ‘0-0-0-0’.
ant to�������������������������������������������������
change PIN number, use the Change PIN function.
■ If you w�������������������������������������������������������

▶

: English

■ The Plug & Play feat������������
ure is only
available in the TV mode.

Viewing the Display
The display identifies the current channel and the status of certain audio-video
settings.

Press the INFO button on the remote control.
The TV will display the channel, the type of sound, and the status of certain picture
and sound settings.
▲, ▼: You can view other channel’s information. If you want to move to the
currently selected channel, press ENTERE button.
◄, ►: You can view the desired program’s information at the current channel.
■ Press the INFO button once more or wait approximately 10 seconds and the
display disappears automatically.

BN68-02315G-01Eng.indd 18

■ Press the INFO button to viewing
the information.
abc1
DTV Air

18:11 Thu 6 Jan

Life On Venus Avenue

Unclassified
No Detaild Information

18:00 ~ 6:00

INFO

2009-06-08 �� 11:00:22

Using the Menus

19
English

Viewing the Menus
MENU button
Display the main on-screen menu.

Using the Menus

Menu provides one button access for controlling your TV. It enables you to perform a variety of tasks intuitively with a control
panel on the screen rather than a variety of remote control button presses.

RETURN button
Return to the previous menu.

ENTERE / DIRECTION Buttons
Move the cursor and select an item.
Select the currently selected item.
Confirm the setting.

EXIT
Exit the on-screen menu.

Operation the Menu
����
The access step may differ depending on the selected menu.

1
2
3
4
5

Press the MENU button.
■ The menu is displayed on the screen.
Press the ▲ or ▼ button to select one of the icons.
Press the ENTERE button to access the icon’s sub-menu.
Press the ▲ or ▼ button to move to items in the menu.
Press the ENTERE button to enter items in the menu.
Press the ▲/▼/◄/► button to change the selected items.
Press the RETURNR button to return to the previous menu.
Press the EXITe button to exit from the menu.

Channel Menu
Channel
Country

Description

❑ Analogue Channel
You can change the country for analogue channels.

Channel

Option

Country

▶

Auto Store
Manual Store
Cable Search Option

❑ Digital Channel

Auto Store

BN68-02315G-01Eng.indd 19

You can change the country for digital channels.
The PIN number input screen appears. Enter your 4 digit
PIN number.
You can scan for the frequency ranges available to you
(and availability depends on your country). Automatically
allocated programme numbers may not correspond to
actual or desired programme numbers.
Scans for all channels with active broadcast stations and
stores them in the TV’s memory.

Now & Next Guide
Full Guide
Default Guide

: Full Guide

■ If a channel is locked using the
Child Lock function, the PIN
input window appears.

2009-06-08 �� 11:00:22

Channel
Option

English

Auto Store

Description

❑ Air / Cable

Using the Menus

Antenna source to memorize
■ Digital & Analogue: Digital and Analogue
channels.
■ Digital: Digital channels.
■ Analogue: Analogue channels.
When selecting Cable → Digital & Analogue
or Cable → Digital:
Provide a value to scan for cable channels.
■ Search Mode → Full / Network /Quick
■ Quick
Network ID: Displays the network
identification code.
Frequency: Displays the frequency
for the channel. (Differs in each
country)
Modulation: Displays available
modulation values.
Symbol Rate: Displays available
symbol rates.

Manual Store

■ If you want to stop Auto Store,
press the ENTERE button.
The Stop Auto Store? message
will be displayed. Select Yes by
pressing the ◄ or ► button, then
press the ENTERE button.

Scans for a channel manually and stores it in the TV’s
memory.

❑ Digital Channel

Manual store for digital channels.
■ Channel: Set the Channel number using the ▲, ▼ or
number (0~9) buttons.
■ Frequency: Set the frequency using the number buttons.
■ Bandwidth: Set the bandwidth using the ▲, ▼ or
number (0~9) buttons.
When it has finished, channels are updated in the channel
list.

■ If a channel is locked using the
Child Lock function, the PIN
input window appears.
n��
el is only available
■ Digital Chan���
in DTV mode.

❑ Analogue Channel

Manual store for analogue channel.
■ Programme (Programme number to be assigned to a
channel): Sets the programme number using the ▲, ▼
or number (0~9) buttons.
■ Colour System → Auto / PAL / SECAM / NTSC4.43:
Sets the colour system value using the ▲ or ▼ button.
■ Sound System → BG / DK / I / L: Sets the sound
system value using the ▲ or ▼ button.
■ Channel (When you know the number of the channel
to be stored): Press the ▲ or ▼ button to select C (Air
channel) or S (Cable channel). Press the ► button, then
press the ▲, ▼ or number (0~9) buttons to select the
required number.
You can also select the channel number directly by
pressing the number (0~9) buttons.
If there is abnormal sound or no sound, reselect
the sound standard required.
■ Search (When you do not know the channel numbers):
Press the ▲ or ▼ button to start the search. The tuner
scans the frequency range until the first channel or the
channel that you selected is received on the screen.
■ Store (When you store the channel and associated
programme number): Set to OK by pressing the
ENTERE button.
Cable Search Option
(depending on the
country)

BN68-02315G-01Eng.indd 20

Sets additional search options such as the frequency and
symbol rate for cable network searches.
■ Freq.Start (Frequency Start): Set the start frequency
(Differs in each country)
■ Freq.Stop (Frequency Stop): Set the stop frequency
(Differs in each country)
■ Modulation: Displays available modulation values.
■ Symbol Rate: Displays available symbol rates.

■ Analogue Channel is only
available in analogue TV mode.
■ Channel mode
P (Programme mode):
When completing tuning, the
broadcasting stations in your
area have been assigned
to position numbers from
P00 to P99. You can select
a channel by entering the
position number in this
mode.
C (Air channel mode):
You can select a channel
by entering the assigned
number to each air
broadcasting station in this
mode.
S (Cable channel mode):
You can select a channel
by entering the assigned
number for each cable
channel in this mode.

2009-06-08 �� 11:00:22

Channel
Option

Description
The EPG (Electronic Programme Guide) information is
provided by the broadcasters. Programme entries may
appear blank or out of date as a result of the information
broadcast on a given channel. The display will dynamically
update as soon as new information becomes available.

❑ Now & Next Guide
For the six channels indicated in the left-hand column,
displays the Current programme and the Next programme
information.

❑ Mini Guide

■ For detailed procedures on using
Now & Next Guide and Full
Guide, refer to the descriptions
on page 21.

Displays the programme information as time ordered One
hour segments. Two hours of programme information is
displayed which may be scrolled forwards or backwards in
time.

Using the Menus

■ You can also display the guide
menu simply by pressing the
GUIDE button. (To configure
the Default Guide, refer to the
descriptions.)

English

Now & Next Guide /
Full Guide /
Default Guide

❑ Default Guide → Now & Next Guide / Full Guide
You can decide whether to display either the Now
& Next Guide or the Full Guide when the GUIDE
button on the remote control is pressed.

Now & Next Guide
Full Guide

Now & Next Guide
DTV Cable 900 f tn
Freshmen On Campus
2:00 - 2:30
No Detailed Information

2:10 Tue 1 Jun

Full Guide

Now
1

f tn

ITV Play

Kerrang!

Kiss

oneword

▼ 6

Smash Hits!

Street Hypn..
Mint Extra
Loaded
Fresh 40 with Dynamite MC
The Distillery
Smash Hits! Sunday

Watch

INFO

1
2
3
4
5
▼ 6

No Information
Kisstory
No Information

■ Full Guide

2:10 Tue 1 Jun

No Detailed Information

No Information

Information

DTV Cable 900 f tn
Freshmen On Campus
2:00 - 2:30

■ Exit

Today

f tn
ITV Play
Kerrang!
Kiss
oneword
Smash Hits!

2:00 - 3:00
Freshmen O..
Mint Extra
Loaded
Fresh 40 with Dynamite MC
The Distillery
Smash Hits! Sunday
INFO Information
Watch

3:00 - 4:00

No Information

■ Now/Next

■ +24 Hours ■ Exit

(Red)

Using the Full / Mini Guide
To...

Then...

Watch a programme in the EPG list

Select a programme by pressing the ▲, ▼, ◄, ► button.

Exit the guide

Press the Blue button

If the next programme is selected, it is scheduled with the clock icon displayed. If the ENTERE button is pressed again, press the
◄, ► button to select Cancel Schedules, the scheduling is cancelled with the clock icon gone.
View programme information

Select a programme of your choice by pressing the ▲, ▼, ◄, ► button.
Then press the INFO button when the programme of your choice is highlighted.
The programme title is on the upper part of the screen centre.

Please click on INFO button for the detailed information. Channel Number, Running Time, Status Bar, Parental Level, Video Quality
Information (HD / SD), Sound Modes, Subtitle or Teletext, languages of Subtitle or Teletext and brief summary of the highlighted
programme are included on the detailed information. “...” will be appeared if the summary is long.
Toggle between the Now & Next Guide and
Full Guide
In Full Guide
Scrolls backwards quickly (24 hours).
Scrolls forwards quickly (24 hours).

BN68-02315G-01Eng.indd 21

Press the Red button repeatedly.
Press the Green button repeatedly.
Press the Yellow button repeatedly.

2009-06-08 �� 11:00:23

Channel
Option

English

Channel List

Description
Using this menu, you can add / delete or set favourites
channels and use the programme guide for digital
broadcasts.

❑ All Channels

Shows all currently available channels.

Using the Menus

❑ Added Channels

Shows all added channels.

❑ Favourites

■ You can select these options by
simply pressing the CH LIST
button on the remote control.
■ To select the favourites channels
you have set up, press the
FAV.CH button on the remote
control.

Shows all favourite channels.

❑ Programmed

Shows all current reserved programmes.
Select a channel in the All Channels, Added Channels
or Favourites screen by pressing the ▲ / ▼ buttons, and
pressing the ENTERE button. Then you can watch the
selected channel.

Using the Colour buttons with the Channel List

■ Red (Channel Type): Toggle between your TV, Radio,
Data / Other and All.
■ Green (Zoom): Enlarges or shrinks a channel number.
■ Yellow (Select): Selects multiple channel lists.
You can perform the add/delete or add to favourites/
delete from favourites function for multiple channels at
the same time. Select the required channels and press
the Yellow button to set all the selected channels at
the same time. The c mark appears to the left of the
selected channels.

Channel List Option Menu (in All Channels /
Added Channels / Favourites)

■ Press the TOOLS button to use the option menu.
■ Option menu items may differ depending on the channel
status.
You can delete or add a channel to display the channels you
want.
■ All deleted channels will be shown on All Channels
menu.
■ You can also delete a channel to the Added Channels or
Favourites menu in the same manner.

■ C���������������������������
h��������������������������
annel Status Display Icons
A : An Analogue channel.
c: A channel selected by
pressing the Yellow button.
* : A channel set as a
Favourite.
(: A programme currently
being broadcast.
\ : A locked channel.
): A reserved programme
824
825

All Channels

❑ Add / Delete

■ TOOLS (Tools): Displays
the Delete (or Add), Add to
Favourite (or Delete from
Favourite), Lock (or Unlock),
Timer Viewing, Edit Channel
Name, Edit Channel Number,
Sort, Select All (or Deselect
All), Auto Store menu. (The
Options menus may differ
depending on the situation.)

You can set channels you watch frequently as favourites.
T Press the TOOLS button to display the Tools menu.
You can also set the add to (or delete from) Favourite by
selecting Tools → Add to Favourite (or Delete from
Favourite).
■ The “*” symbol will be displayed and the channel will be
set as a favourite.
■ All favourite channels will be shown on Favourites
menu.

C --

C -C -C -C -C -C -C --

A3
A4

A5
A6

❑ Add to Favourite / Delete from Favourite

A8
All

UKTV Gold
UKTV style

Channel Type

Zoom

Delete
Add to Favourite
Timer Viewing
Edit Channel Name
Sort
Lock

Select T Tools

■ A gray-coloured channel
indicates the channel has been
deleted.
■ The Add menu only appears for
deleted channels.

❑ Timer Viewing

If you reserve a programme you want to watch, the channel
is automatically switched to the reserved channel in the
Channel List; even when you are watching another channel.
To reserve a programme, set the current time first.
■ You can set the channel, day, month, year, hour and
minute directly by pressing the number buttons on the
remote control.
■ Reserving a programme will be shown in the
Programmed menu.
■ Digital Programme Guide and Viewing Reservation:
When a digital channel is selected, and you press
the ► button, the Programme Guide for the channel
appears. You can reserve a programme according to the
procedures described above.

BN68-02315G-01Eng.indd 22

2009-06-08 �� 11:00:23

Channel
Option

❑ Edit Channel Name (analogue channels only�
�����)
Channels can be labelled so that their call letters appear
whenever the channel is selected.

❑ Edit Channel Number (digital channels only�
�����)

Using the Menus

You can also edit the channel number by pressing the
number buttons on the remote control.

■ Only memorized channels can
be reserved.

❑ Sort (analogue channels only�
�����)

This operation allows you to change the programme
numbers of the stored channels. This operation may be
necessary after using the auto store.

❑ Lock / Unlock

You can lock a channel so that the channel cannot be
selected and viewed.
■ This function is available only when the Child Lock is set
to On. (Refer to page 32)
■ The PIN number input screen appears. Enter your 4 digit
PIN number.
■ The default PIN number of a new TV set is “0-0-0-0”. You
can change the PIN, by selecting Change PIN from the
menu.
■ The “\” symbol will be displayed and the channel will be
locked.

English

Channel List

Description

■ The names of digital
broadcasting channels are
automatically assigned and
cannot be renamed.

❑ Select All / Deselect All
■
■

Select All: You can select all the channels in the
channel list.
Deselect All: You can deselect all the selected
channels.

❑ Auto Store

For detailed procedures on setting up options, refer to
pages 19~20.

■ You can only select Deselect
All when there is a selected
channel.

Channel List Option Menu (in Programmed)
You can view, modify or delete a reservation.
Press the TOOLS button to use the option menu.

❑ Change Info

Select to change a viewing reservation.

■ If a channel is locked using the
Child Lock function, the PIN
input window appears.

❑ Cancel Schedules

Select to cancel a viewing reservation.
Select to view a viewing reservation.
(You can also change the reservation information.)

Programmed

❑ Information

1 / 1 / 2009

13:59 5 TV1 ) Change Info
18:59
20:59
21:59

❑ Select All

Cancel Schedules
Equalizer
2 TV3 ) The
Information
2 TV3 ) McMillan
& Wife
Select All
2 TV3 ) M.Spillane’s mike

Select all reserved programmes.
All

Channel Mode

Zoom

Select T Tools E Information

When press the P >/< button, Channels will be switched
within the selected channel list.

❑ Added Ch.

Channels will be switched within the memorized channel list.

❑ Favourite Ch.

Channels will be switched within the favourite channel list.

Fine Tune

BN68-02315G-01Eng.indd 23

If the r����������������������������������������������������
ece�������������������������������������������������
ption is clear, you do not have to fine tune the
channel, as this is done automatically during the search and
store operation. If the signal is weak or distorted, you may
have to fine tune the channel manually.
■ Fine tuned channels that have been saved are marked
with an asterisk ‘*’ on the right-hand side of the channel
number in the channel banner.
■ To reset the fine-tuning, select Reset by pressing the
▲ or ▼ button and then press the ENTERE button.

■ Only Analogue TV channels can
be fine tuned.

2009-06-08 �� 11:00:24

Picture Menu
Mode

Using the Menus
Backlight /
Contrast /
Brightness /
Sharpness /
Colour /
Tint(G/R)

Advanced Settings

Description
Selects the type of picture settings that best correspond to
your viewing preferences or requirements. Presets a higher
brightness, contrast, and sharpness to the picture.
■ D������
yn����
amic
Recommended for use in bright room conditions.
■ Standard
Recommended for use in a normal viewing condition.
■ Natural
Adds more punch and contrast to the image than the
Standard mode.
■ Movie
Corresponding to the conditions used in movie,
recommended for use in darker viewing conditions.
Your television has several setting options that allow you to
control the picture quality.
■ Backlight
Adjusts the brightness of LCD back light.
■ Contrast
Increases or decreases the brightness in white areas of the
picture. Too little contrast and the picture may seem dark;
too much contrast and the picture will lose details in white
images.
■ Brightness
Increases or decreases the overall brightness of the
picture, but best used to adjust the black level of the image.
Too little brightness and shadow detail will be lost; too much
brightness and blacks will be gray and washed out.
■ Sharpness
Increases or decreases the apparent detail in the picture.
Too little sharpness and the image might look soft. Too
much sharpness can add false edges to objects or can
make noise more noticeable.
■ Colour
Increases or decreases colour saturation levels in the
picture. Too little colour and the image will be black and
white (undersaturated); too much colour and the image will
look oversaturated and cartoonish.
■ Tint(G/R)
Changes the picture hue from reddish to a greenish
appearance.
Samsung’s new TVs allow you to make even more precise
picture settings than previous models.
■ Black Tone → Off / Dark / Darker / Darkest
Increases the picture’s shadow detail by lightening the
black level (ie changing the gamma) at low levels. This is
most commonly used for watching movies with dark scenes
to keep the picture from appearing washed out in bright
rooms.
■ Dynamic Contrast → Off / Low / Medium / High
Increases or decreases the difference between the
brightest and darkest portions of the image with changing
scenes. Shadows are more visible with dark scenes, while
contrast is enhanced with bright scenes.

Picture

English

Picture
Option

Mode

: Standard

Backlight

Contrast

: 95

Brightness

: 45

Sharpness

: 50

Colour

: 50

Tint (G/R)

: G50/R50

■ Press the TOOLS button to
display the Tools menu. You
can also set the picture mode
by selecting Tools → Picture
Mode.

■ Natural is not available in PC
mode.
▲
Backlight
▼

7
U Move L Adjust

E Enter

R Return

■ Only analogue TV, Ext., AV
modes of the PAL system,
you cannot use the Tint(G/R)
Function.
■ When you make changes to
Backlight, Contrast, Brightness,
Sharpness, Colour or Tint(G/
R), the OSD will be adjusted
accordingly.
■ In PC mode, you can only make
changes to Backlight, Contrast
and Brightness.
■ Settings can be adjusted and
stored for each external device
you have connected to an input
of the TV.
■ The energy consumed during use
can be significantly reduced if the
brightness level of the picture is
lowered, which will reduce the
overall running cost.
Advanced Settings
Black Tone

: Off

Dynamic Contrast

: Medium

Gamma

Colour Space

: Native

▶

White Balance
Flesh Tone

Edge Enhancement

: On
U Move

BN68-02315G-01Eng.indd 24

▶

E Enter

R Return

2009-06-08 �� 11:00:25

Picture
Option

BN68-02315G-01Eng.indd 25

■ Advanced Settings is available in
Standard or Movie mode.
■ In PC mode, you can only
make changes to Gamma and
White Balance from among the
Advanced Settings items.
■ Colour is available when Colour
Space is set to Custom.
■ In Colour, you can adjust the
RGB values for the selected
colour.
■ To reset the adjusted RGB value,
select Reset.

Using the Menus

Picture Options

Description
■ Gamma
Changes the rate at which images ramp or fade from light
to dark. Recommended for advanced users only.
■ Colour Space
Increases or decreases the visible colour range for red,
green and blue. Recommended for advanced users only.
Auto: The TV will choose the colour range that
is closest to the range used during TV and movie
production.
Native: Displays the most enhanced, vibrant
colours possible.
■ White Balance
You can adjust the colour temperature for more natural
picture colours.
R, G, B-Offset: Fine tunes the white balance, or
colour ‘temperature’ in dark areas by changing the
individual values of R, G, B. Recommended for
advanced users only.
R, G, B�������
-Gain: Fine tunes the white balance, or
colour ‘temperature’ in the light areas by changing
the individual values of R, G, B. Recommended for
advanced users only.
Reset: Resets the colour space to the default
values.
■ Flesh Tone
Adjusts the colour of flesh tones. Increasing the value
creates a more reddish picture. Decreasing the value
creates a more greenish picture.
■ Edge Enhancement
Increases or decreases the emphasis at object edges.
■ xvYCC
Setting the xvYCC mode to on increases detail and colour
space when watching movies from an external device (ie.
DVD player) connected to the HDMI or Component IN
jacks.
■ Colour Tone
Selects a preset white balance, or ‘colour temperature’
setting, to provide either a reddish or bluish hue, dependant
upon your personal preference.
Cool: Selects a white balance, or colour
‘temperature’ with a bluish hue. Skin tones may
have less warmth but whites will seem brighter.
Recommended when watching normal TV
broadcasting in a bright room.
Normal: Selects the white balance, or colour
“temperature” with a less bluish, more reddish hue.
Suitable for most viewing environments and programs.
Warm1, Warm2, Warm3: Selects a redder, warmer
hue that more closely matches the setting on monitors
used in the production of TV and movie content.
Recommended when watching movie and dramatic
TV content. The lowest setting is best used for black &
white content.

English

Advanced Settings

■ xvYCC is available when the
picture mode is set to Movie, and
the external input is set to HDMI or
Component mode.
■ This function may not be
supported depending on your
external device.
Picture Options
Colour Tone

: Normal

Size

: Auto Wide

Screen Mode

: 16:9

Digital NR

: Auto

HDMI Black Level

: Normal

Film Mode

: Off

Blue Only Mode

: Off
U Move

▶

E Enter

R Return

■ In PC mode, you can only make
changes to the Colour Tone and
Size from among the items in
Picture Options.
■ Warm1, Warm2 or Warm3 is
only activated when the picture
mode is Movie.

2009-06-08 �� 11:00:25

Picture
Option

English

Picture Options

Using the Menus
BN68-02315G-01Eng.indd 26

Description
■ Size
Changes the screen shape in terms of height and width.
Also known as Aspect Ratio.
Auto Wide: Enables the correct picture size to
match the original video signal.
16:9: Sets the picture aspect ratio to fill the screen.
Wide Zoom: Enlarges the middle part of the
picture.
Zoom: Magnifies the picture contents horizontally
and vertically.
4:3: Sets the picture aspect ratio to 4:3 with black
or gray side bars.
Screen Fit: Matches every pixel of the original
image to a pixel on the TV screen (aka 1:1 pixel
mapping) to show the entire image.
● Wide Zoom: Press the ► button to select
Position, then press the ENTERE button.
Press the ▲ or ▼ button to move the picture up /
down. Then press the ENTERE button.
● Zoom: Press the ► button to Select Position,
then press the ENTERE button. Press the
▲ or ▼ button to move the picture up and down.
Then press the ENTERE button. Press the
► button to Select Size, then press the ENTERE
button. Press the ▲ or ▼ button to magnify or
reduce the picture size in the vertical direction.
Then press the ENTERE button.
● After selecting Screen Fit in HDMI (1080i / 1080p)
or Component (1080i / 1080p) mode: Select
Position by pressing the ◄ or ► button. Use the
▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select Reset,
then press the ENTERE button. You can initialize
the setting.
● If you use the Screen Fit function with HDMI 720p
input, 1 line will be cut at the top, bottom, left and
right as in the Overscan function.
■ Screen Mode
When setting the picture size to Auto Wide in a 16:9 wide
TV, you can determine the picture size you want to see the
4:3 WSS (Wide Screen Service) image or nothing. Each
individual European country requires different picture size
so this function is intended for users to select it.
16:9: Sets the picture to 16:9 wide mode.
Wide Zoom: Magnify the size of the picture more
than 4:3.
Zoom: Magnify the size of the picture vertically on
screen.
4:3: Sets the picture to 4:3 normal mode.
■ Digital NR → Off / Low / Medium / High / Auto
Can reduce the grain effect or level of video snow seen in
images coming from poor quality sources.
■ HDMI Black Level → Normal / Low
Adjusts the black level in the picture according to the type
of signal being transmitted through HDMI.
■ Film Mode
Applies the appropriate video processing needed to
achieve the best picture quality for watching movies.
Off: Turn the Film Mode function off.
Auto1: Improves the picture quality for fast motion
scenes.
Auto2: Allows a smoother text motion on fast
motion scenes.

■ You can select these options
by simply pressing the P.SIZE
button on the remote control.

■ Depending on the input source,
the picture size options may vary.
■ The items available may differ
depending on the selected mode.
■ In PC Mode, only 16:9 and 4:3
mode can be adjusted.
■ Settings can be adjusted and
stored for each external device
you have connected to an input
of the TV.
■ Temporary image retention may
occur when viewing a static image
on the set for more than two
hours.

■ This function is available in
Auto Wide mode.
■ This function is not available in
PC, Component or HDMI mode.

■ This function is active only when
an external device is connected to
the TV via HDMI (RGB signals).

■ Film Mode is supported in TV, AV,
COMPONENT(480i / 1080i) and
HDMI(480i / 1080i).

2009-06-08 �� 11:00:25

Picture
Option

Picture Reset

27
■ Blue Only Mode is available
when the picture mode is set to
Movie or Standard.

Using the Menus

Picture (In the PC mode)
Option

Auto Adjustment

Screen

BN68-02315G-01Eng.indd 27

English

Picture Options

Description
■ Blue Only Mode
Helps to adjust the colour and tint controls when used with
colour bar test patterns. Recommended for qualified picture
alignment specialists only. Available only when the Picture
Mode is set to Movie or Standard.
Resets all picture settings to the default values.
■ Reset Picture Mode: Current picture values return to
default settings.

Description
Use the Auto Adjust function to have the TV set
automatically adjust the video signals it receives.
The function also automatically fine-tunes the settings and
adjusts the frequency values and positions.
oar��
se / Fine
■ C�����
The purpose of picture quality adjustment is to remove or
reduce picture noise. If the noise is not removed by Finetuning alone, then adjust the frequency as best as possible
(Coarse) and Fine-tune again. After the noise has been
reduced, readjust the picture so that it is aligned on the
centre of screen.
■ PC Position
Adjust the PC’s screen positioning if it does not fit the TV
screen.
Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the ◄ or ► button to adjust the Horizontal-Position.
■ Image Reset
You can replace all image settings with the factory default
values.

■ Preset: Press the SOURCE button
to select PC mode.
■ This function does not work in
DVI-HDMI mode.

■ Press the TOOLS button to
display the Tools menu. You can
also set the Auto Adjustment
by selecting Tools → Auto
Adjustment.

2009-06-08 �� 11:00:25

Sound Menu
Mode

Using the Menus

Equalizer

SRS TruSurround HD

Audio Language

Audio Format

Audio Description

Auto Volume

Speaker Select

BN68-02315G-01Eng.indd 28

Description
■ Standard: Selects the normal sound mode.
■ Music: Emphasizes music over voices.
■ Movie: Provides the best sound for movies.
■ Clear Voice: Emphasizes voice over other sounds.
■ Custom: Recalls your customized sound settings.
The sound settings can be adjusted to suit your personal
preferences.
■ Mode: Selects the sound mode among the predefined
settings.
■ Balance L/R: Adjusts the balance between the right and
left speaker.
■ 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth
Adjustment): To adjust the level of different bandwidth
frequencies.
■ Reset: Resets the equalizer settings to the default values.
SRS TruSurround HD is a patented SRS technology that
solves the problem of playing 5.1 multichannel content
over two speakers. TruSurround delivers a compelling,
virtual surround sound experience through any two-speaker
playback system, including internal television speakers.
It is fully compatible with all multichannel formats.
You can change the default value for audio languages.
Displays the language information for the incoming stream.
■ While viewing a digital channel, this function can be
selected.
■ You can only select the language among the actual
languages being broadcast.
When sound is emitted from both the main speaker and
the audio receiver, a sound echo may occur due to the
decoding speed difference between the main speaker
and the audio receiver. In this case, use the TV Speaker
function.
■ While viewing a digital channel, this function can be
selected.
■ The Audio Format appears according to the broadcasting
signal.
This is an auxiliary audio function that provides an
additional audio track for visually challenged persons.
This function handles the Audio Stream for the AD (Audio
Description), when it is sent along with the Main audio from
the broadcaster. Users can turn the Audio Description On or
Off and control the volume.
■ Audio Description
Turn the audio description function on or off.
■ Volume
You can adjust the audio description volume.
Volume is active when Audio Description is set
to On.
While viewing a Digital channel, this function can
be selected.
Each broadcasting station has its own signal conditions,
and so it is not easy to adjust the volume every time the
channel is changed. This feature lets you automatically
adjust the volume of the desired channel by lowering the
sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
When you watch TV with it connecting to a Home theatre,
turn the TV speakers off so you can listen to sound from the
Home theatre’s (external) speakers.
■ External Speaker: Used to listen to the sound of the
External (Home Theatre) Speakers.
■ TV Speaker: Used to listen to the sound of the TV
Speakers.

Sound

English

Sound
Option

Mode

: Custom

▶

Equalizer
SRS TruSurround HD

: Off

Audio Language

: ----

Audio Format

: ----

Audio Description
Auto Volume

: Off

■ Press the TOOLS button to
display the Tools menu. You can
also configure the sound mode
by selecting Tools → Sound
Mode.

■ Press the TOOLS button to
display the Tools menu. You can
also set the SRS TruSurround
HD by selecting Tools → SRS
TS HD.

■ The volume buttons and MUTE
buttons do not operate when the
Speaker Select is set to External
Speaker.
■ If you select External Speaker
in the Speaker Select menu, the
sound settings will be limited.

2009-06-08 �� 11:00:25

Selecting the Speaker

Mute

Sound Output

Mute

Sound
Option

Sound Reset

Using the Menus

TV Speaker
External
Speaker
Video No Signal

29
English

RF / AV / Component / PC / HDMI
Sound Output

Audio Out (Optical, L/R Out) to
Sound System
RF / AV / Component / PC / HDMI
Sound Output

TV’s Internal Speakers

Sound Reset

Description
You can restore the Sound settings to the factory defaults.
Reset Sound Mode: Current sound values return to default
settings.

Cancel sound reset.

Reset All

Reset Sound Mode

L Move

Cancel

E Enter

R Return

Selecting the Sound Mode
You can set the sound mode by pressing the DUAL button. When you press it, the current
sound mode is displayed on the screen.

A2
Stereo

NICAM
Stereo

Audio Type
Mono
Stereo
Dual
Mono
Stereo
Dual

Dual 1 / 2
MONO
STEREO ↔ MONO
DUAL 1 ↔ DUAL 2
MONO
MONO ↔ STEREO
MONO ↔ DUAL 1
DUAL 2

Default
Automatic change
DUAL 1
Automatic change
DUAL 1

■ If the stereo signal is weak and an automatic switching occurs, then switch to the mono.
■ This function is only activated in stereo sound signal. It is deactivated in mono sound
signal.
■ This function is only available in TV mode.

BN68-02315G-01Eng.indd 29

2009-06-08 �� 11:00:26

Setup Menu
Menu Language
Time

Description
You can set the menu language.

Plug & Play

Setup

English

Setup
Option

Menu Language

❑ Clock

Using the Menus

Setting the clock is necessary in order to use the various timer
features of the TV. If you disconnect the power cord, you have
to set the clock again.
■ Clock Mode
You can set up the current time manually or automatically.
Auto: Set the current time automatically using the time
from the digital broadcast.
Manual: Set the current time to a manually specified time.
■ Clock Set
You can set the current time manually.
This function is only available when Clock Mode is set
to Manual.
You can set the day, month, year, hour and minute
directly by pressing the number buttons on the remote
control.

❑ Sleep Timer

The sleep timer automatically shuts off the TV after a preset
time (30, 60, 90, 120, 150 and 180 minutes).
■ To cancel the Sleep Timer function, select Off.

: English

▶

Time
Broadcast
Security
General

■ The current time will appear
every time you press the INFO
button.

■ Depending on the broadcast
station and signal, the auto time
may not be set correctly. If this
occurs, set the time manually.
■ The Antenna or cable must be
connected in order to set the time
automatically.

❑ Timer 1 / Timer 2 / Timer 3

Three different on / off timer settings can be made.
You must set the clock first.
■ On Time
Set the hour, minute, and activate / inactivate.
(To activate timer with the setting you’ve chosen, set to
Activate.)
■ Off Time
Set the hour, minute, and activate / inactivate.
(To activate timer with the setting you’ve chosen, set to
Activate.)
■ Volume
Set the desired volume level.
■ Source → TV / USB
You can select the TV or USB device content to be played
when the TV is turned on automatically. Select TV or USB.
(Make sure that an USB device is connected to your TV.)
Antenna (when TV / USB is set to TV)
Select ATV or DTV.
Channel (when TV / USB is set to TV)
Select the desired channel.
Music or Photo (when TV / USB is set to USB)
Contents (when Source is set to USB) You can select
a folder on the USB Device with music or photo files to
be played when the TV turns on automatically.
If the folder name is too long, the folder can not be
selected.
If the folder name to be configured by the Contents
function is too long, it cannot be selected.
■ Repeat
Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
Manual.
When Manual is selected, press the ► button to select
the desired day of the week. Press the ENTERE button
over the desired day and the c mark will appear.
You can set the hour, minute and channel by pressing the
number buttons on the remote control.

BN68-02315G-01Eng.indd 30

■ Press the TOOLS button to
display the Tools menu. You
can also set the sleep timer by
selecting Tools → Sleep Timer.
Timer 1
On Time
00

Inactivate

Off Time
00

Volume

Contents
TV ATV 1

Repeat

Sun

Mon

Tue

Wed

Thu

Fri

Sat

Once
L Move U Adjust E Enter

R Return

■ When there is only one photo file
in the USB, the Slide Show will
not play.

■ Auto Power Off
When you set the timer on, the
TV will be eventually turned off,
if no controls are operated for 3
hours after the TV was turned on
by the timer. This function is only
available in timer on mode and
prevents overheating, which may
occur if a TV is on for too long
time.

2009-06-08 �� 11:00:26

Setup
Option

Description

❑ Subtitle

Using the Menus

You can activate and deactivate the subtitles. Use this
menu to set the Subtitle Mode. Normal under the menu is
the basic subtitle and Hard of hearing is the subtitle for a
hearing-impaired person.
■ Subtitle
Switches subtitles on or off.
■ Mode
Sets the subtitle mode.
■ Subtitle Language
Set the subtitle language.
If the programme you are watching does not support
the Hard of hearing function, Normal automatically
is activated even though Hard of hearing mode is
selected.
English is the default in cases where the selected
language is unavailable in the broadcast.

English

Broadcast

■ You can select these options
simply by pressing the SUBT.
button on the remote control.

❑ Digital Text
If the programme broadcasts with digital text, this feature is
enabled.
■ MHEG (Multimedia and Hypermedia Information Coding
Experts Group)
An International standard for data encoding systems
used in multimedia and hypermedia. This is at a higher
level than the MPEG system which includes data-linking
hypermedia such as still images, character service,
animation, graphic and video files as well as multimedia
data. MHEG is user runtime interaction technology
and is being applied to various fields including VOD
(Video-On-Demand), ITV (Interactive TV), EC (Electronic
Commerce), tele-education, tele-conferencing, digital
libraries and network games.

❑ Teletext Language
You can set the Teletext language by selecting the language
type.
■ English is the default in cases where the selected
language is unavailable in the broadcast.

❑ Preference

■ Primary Audio Language / Secondary Audio
Language / Primary Subtitle Language / Secondary
Subtitle Language / Primary Teletext Language /
Secondary Teletext Language
Using this feature, users can select one of the languages.
The language selected here is the default when the user
selects a channel
If you change the language setting, the Subtitle
Language, Audio Language, and the Teletext Language
of the Language menu are automatically changed to the
selected language.
The Subtitle Language, Audio Language, and the Teletext
Language of the Language menu show a list of languages
supported by the current channel and the selection is
highlighted. If you change this language setting, the
new selection is only valid for the current channel. The
changed setting does not change the setting of the
Primary Subtitle Language, Primary Audio Language, or
the Primary Teletext Language of the Preference menu.

BN68-02315G-01Eng.indd 31

2009-06-08 �� 11:00:26

Setup

Option

English

Broadcast

Using the Menus
Security

Description

❑ Common Interface

■ CI Menu
This enables the user to select from the CAM-provided
menu.
Select the CI Menu based on the menu PC Card.
■ Application Info.
This contains information on CAM inserted in the CI slot
and displays it. The Application Info inserting is about the
CI CARD. You can install the CAM anytime whether the TV
is ON or OFF.
1. Purchase the CI CAM module by visiting your nearest
dealer or by phone.
2. Insert the CI
���������������������������������������������
CARD��������������������������������������
into the CAM in the direction of the
arrow until it fits.
3. Insert the CAM with the CI
���������������������������
CARD��������������������
installed into the
common interface slot.
(Insert the CAM in the direction of the arrow, right up to
the end so that it is parallel with the slot.)
4. Check if you can see a picture on a scrambled signal
channel.

❑ Child Lock
This feature allows you to prevent unauthorized users,
such as children, from watching unsuitable programme by
muting out video and audio.
■ Before the setup screen appears, the PIN number input
screen appears. Enter your 4 digit PIN number.
■ The default PIN number of a new TV set is 0-0-0-0.
■ You can lock some channels in Channel List�.

■ Child Lock is available only in
TV mode.

❑ Parental Lock > Parental Rating
This feature allows you to prevent unauthorized users,
such as children, from watching unsuitable programme by
a 4-digit PIN (Personal Identification Number) code that is
defined by the user.
■ The Parental Rating item differs depending on the
country.
■ Before the setup screen appears, the PIN number input
screen appears. Enter your 4 digit PIN number.
■ The default PIN number of a new TV set is 0-0-0-0.
■ You can change the PIN by selecting Change PIN from
the menu.
■ When the parental ratings are set, the “\” symbol is
displayed.
■ Allow All: Press to unlock all TV ratings.
■ Block All: Press to lock all TV ratings.

❑ Change PIN
You can change your personal ID number that is required to
set up the TV.
■ Before the setup screen appears, the PIN number input
screen appears. Enter your 4 digit PIN number.
■ The default PIN number of a new TV set is 0-0-0-0.
■ You can change the PIN by selecting Change PIN from
the menu.

BN68-02315G-01Eng.indd 32

■ If you forget the PIN code, press
the remote control buttons in the
following sequence, which resets
the PIN to 0-0-0-0: POWER
(Off) → MUTE → 8 → 2 → 4 →
POWER (On).

2009-06-08 �� 11:00:26

Setup
Option

❑ Energy Saving
This feature adjusts the brightness of the TV in order to
reduce power consumption. When watching TV at night,
set the Energy Saving mode option to High to reduce eye
fatigue as well as power consumption.
If you select Picture Off, the screen is turned off and you
can only hear the sound. Press any button to get out of
Picture Off.

❑ Melody
A melody sound can be set to come on when the TV is
powered On or Off.
■ The Melody does not play
When no sound is output from the TV because the
MUTE button has been pressed.
When no sound is output from the TV because the
volume has been reduced to minimum with the
volume (-) button.
When the TV is turned off by Sleep Timer function.

■ Restrictions on game mode
(Caution)
To disconnect the game
console and connect another
external device, set Game
Mode to Off in the setup
menu.
Game Mode is not available
in regular TV, PC and Ext
mode.
■ If the picture is poor when
external device is connected
to TV, check if Game Mode is
On. Set Game Mode to Off and
connect external devices.

Using the Menus

When connecting to a game console such as PlayStation™
or Xbox™, you can enjoy a more realistic gaming
experience by selecting game menu.
■ If Game Mode is On:
Picture mode is automatically changed to Standard
and cannot be changed.
Sound mode is automatically changed to Custom
and cannot be changed. Adjust the sound using the
equalizer.
The Reset Sound function is activated. Selecting
the Reset function after setting the equalizer resets
the equalizer settings to the factory defaults.

BN68-02315G-01Eng.indd 33

Description

❑ Game Mode

English

General

■ Press the TOOLS button to
display the Tools menu. You
can also set the Energy Saving
option by selecting Tools →
Energy Saving.

2009-06-08 �� 11:00:26

Input Menu
Source List

Using the Menus
Edit Name

BN68-02315G-01Eng.indd 34

Description
Use to select TV or other external input sources such as
DVD / Blu-ray players / Cable Box / Satellite receivers
(Set-Top Box) connected to the TV. Use to select the input
source of your choice.
■ TV / Ext.1 / Ext.2 / AV / Component / PC / HDMI1 /
HDMI2 / HDMI3/DVI / HDMI4 / USB
You can choose only those external devices that
are connected to the TV. In the Source List,
connected inputs will be highlighted and sorted to
the top. Inputs that are not connected will be sorted
to the bottom.
Ext. and PC Always stays activated.
Using the Colour buttons on the remote with the
Source list.
● Red (Refresh): Refreshes the connected external
devices. Press this if your Source is on and
connected, but does not appear in the list.
● TOOLS (Tools): Displays the Edit Name and
Information menus.
Name the device connected to the input jacks to make your
input source selection easier.
■ VCR / DVD / Cable STB / Satellite STB / PVR STB / AV
Receiver / game / Camcorder / PC / DVI / DVI PC / TV
/ IPTV / Blu-ray / HD DVD / DMA
When a PC with a resolution of 1920 x 1080@60Hz
is connected to the HDMI IN 3 port, you should set
the HDMI IN 3(DVI) mode to DVI PC in the
Edit Name of the Input mode.
When connecting an HDMI/DVI cable to the
HDMI IN 3(DVI) port, you should set the
HDMI3/DVI mode to DVI or DVI PC in the
Edit Name of the Input mode. In this case, a
separate sound connection is required.

Input

English

Input
Option

Source List
Edit Name

■ Press the SOURCE button on
the remote control to view an
external signal source. TV mode
can be selected by pressing the
TV button.

■ Ext. and PC always stays activated.
Source List

TV
Ext. 1
Ext. 2
PC
AV
Component
HDMI 1

:---:---:---:---:---:---Refresh

T Tools

2009-06-08 �� 11:00:27

Support menu

BN68-02315G-01Eng.indd 35

Self Diagnosis

▶

Software Upgrade
HD Connection Guide
Contact Samsung

■ If you hear no sound from the
TV’s speakers, before performing
the sound test, make sure
Speaker Select is set to TV
speaker in the Sound menu.

Using the Menus

Software Upgrade

Support

Self Diagnosis

Description
■ Picture Test
If you think you have a picture problem, perform the picture
test. Check the colour pattern on the screen to see if the
problem still exists.
Yes: If the test pattern does not appear or there
is noise in the test pattern, select Yes. Therefore,
contact Samsung’s call centre for assistance.
No: If the test pattern is properly displayed, select
No. There may be a problem with your external
equipment. Please check your connections. If the
problem still persists, refer to the external device’s
user manual.
■ Sound Test
If you think you have a sound problem, please perform the
sound test. You can check the sound by playing a built-in
melody sound through the TV.
‘Does the problem still exist with this sound test?’ appears
on the screen.
Yes: If during the sound test you can hear sound only
from one speaker or not at all, select Yes. Therefore,
contact Samsung’s call centre for assistance.
No: If you can hear sound from the speakers, select
No. There may be a problem with your external
equipment. Please check your connections. If the
problem still persists, refer to the external device’s
user manual.
■ Signal Information (digital channels only)
Unlike analogue channels, which can vary in reception
quality from ‘snowy’ to clear, digital (HDTV) channels have
either perfect reception quality or you will not receive them
at all. So, unlike analogue channels, you cannot fine tune
a digital channel. You can, however, adjust your antenna to
improve the reception of available digital channels.
Samsung may offer upgrades for the TV’s firmware in the
future. These upgrades can be performed via the TV when
it is connected to the Internet, or by downloading the new
firmware from samsung.com to a USB memory device.
Current Version is the software already installed in
the TV.
Alternative Software (Backup) shows the previous
version that will be replaced.
Software is represented as ‘Year/Month/Day_Version’.
The more recent the date, the newer the software
version. Installing the latest version is recommended.
■ By USB
Insert a USB drive containing the firmware upgrade
downloaded from samsung.com into the TV. Please be
careful to not disconnect the power or remove the USB
drive while upgrades are being applied. The TV will turn
off and turn on automatically after completing the firmware
upgrade. Please check the firmware version after the
upgrades are complete (the new version will have a
higher number than the older version). When software is
upgraded, video and audio settings you have made will
return to their default (factory) settings. We recommend you
write down your settings so that you can easily reset
them after the upgrade.

English

Support
Option

■ The melody will be heard during
the test even if Speaker Select
is set to External Speaker or the
sound is muted by pressing the
MUTE button.

■ If the signal strength meter
indicates that the signal is weak,
physically adjust your antenna
to increase the signal strength.
Continue to adjust the antenna
until you find the best position
with the strongest signal.

TV Side Panel

USB Drive

Software Upgrade
Current Version

2009/01/17_000001

By USB

▶

By Channel
Standby Mode Upgrade

: 45 Min

Alternative Software

2009/01/16_000000

U Move

E Enter

R Return

2009-06-08 �� 11:00:27

Support
Option

Description

English

■ By Channel
Upgrades the software using the broadcasting signal.
If the function is selected during the software
transmission period, this function searches for
available software and downloads the software.
The time required to download the software is
determined by the signal status.
■ Standby Mode Upgrade
To continue software upgrade with master power on,
Select On by pressing the ▲ or ▼ button. 45 minutes after
entering standby mode, a manual upgrade is automatically
conducted. Since the power of the unit is turned on
internally, the screen may be on slightly for the LCD
product. This phenomenon may continue for more than 1
hour until the software upgrade is completed.
■ Alternative Software (Backup)
If there is an issue with the new firmware and it is affecting
operation, you can change the software to the previous
version.
If software was changed, existing software is
displayed.
You can change current software to alternative
software by Alternative Software.

HD Connection Guide

This menu presents the connection method that provides
the optimal quality for the HD TV. Refer to this information
when connecting external devices to the TV.
View this information when your TV does not work properly
or when you want to upgrade the software. You can view
the information regarding the call centre, product and
software file download method.

Using the Menus

Software Upgrade

Contact Samsung

BN68-02315G-01Eng.indd 36

2009-06-08 �� 11:00:27

Connecting a USB Device
Press the POWER button to turn the TV on.

Connect a USB device containing photo and/or music files to the USB jack on
the side of the TV.

When the Application selection screen is displayed, press the ENTERE
button to select Media Play (USB).

Media Play - USB Device

1
2
3

TV Side Panel

37
English

Media Play - USB Device
USB Drive

Photo

SUM
861MB/994MBFree

Photo

Music

■
■
■
■
■
■
■
■
■
■
■
■

■
■
■

Move

Setup

Enter

Return

MTP (Media Transfer Protocol) is not supported.
The file system only supports FAT16/32 (The NTFS file system is not supported).
Certain types of USB Digital camera and audio devices may not be compatible with this TV.
Media Play only supports the USB Mass Storage Class device (MSC). MSC is a Mass Storage Class Bulk-Only Transport device.
Examples of MSC are Thumb drives and Flash Card Readers (Both USB HDD and HUB are not supported.)
Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB compatibility
problem.
Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is not
responsible for any data file damage or data loss.
Do not disconnect the USB device while it is loading.
The sequential JPEG format is supported.
The higher the resolution of the image, the longer it takes to display on the screen.
The maximum supported JPEG resolution is 15360X8640 pixels.
For unsupported or corrupted files, the ‘Not Supported File Format’ message is displayed.
MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management (DRM) is a
technology that supports the creation of content, the distribution and management of the content in an integrated and comprehensive
way, including the protection of the rights and interests of the content providers, the prevention of the illegal copying of contents, as well
as managing billings and settlements.
When moving to a photo, loading may take a few seconds. At this point, the loading icon will appear at the screen.
If more than one MSC device is connected, some of them may not be recognized.
If a device requires high power (more than 500mA or 5V), the USB device may not be supported.
If an over-power warning message is displayed while you are connecting or using a USB device, the device may not be recognized or
may malfunction.

BN68-02315G-01Eng.indd 37

2009-06-08 �� 12:54:02

Using the Media Play Menu

Media Play - USB Device

Press the MENU button. Press the ▲ or ▼ button to select Application, then
press the ENTERE button.

Press the ▲ or ▼ button to select Media Play (USB), then press the ENTERE
button.

Press the ▲ or ▼ button to select the corresponding USB Memory Device, then
press the ENTERE button.

Press the ◄ or ► button to move to an icon, then press the ENTERE button.

Anynet+ (HDMI-CEC)

Application

English

Media Play (USB) ▶

■ The Media Play (USB) menu
differs depending on the USB
Memory Device connected to TV.
■ Some devices may not be
supported due to compatibility
problems.

Using the Remote Control Button in Media Play Menu

STORAGE DEVICE
STORAGE DEVICE

Button
▲/▼/◄/►
ENTERE
∂
∑
RETURN
INFO
∫
π/μ
EXIT

Operations
Move the cursor and select an item.
Select the currently selected item.
Play the Slide Show or MP3 file.
Play the Slide Show or MP3 file.
Return to the previous menu.
Run various functions from the Photo and Music menus.
Stop the current slide show or MP3 file.
Page Up or Down (file list item)
Stop the current function and return to the previous highlevel menu.

SUM

STORAGE DEVICE
STORAGE DEVICE

Move

Enter

Exit

■ Press the MEDIA.P button on the
remote control to display a Media
Play menu.

Using the PHOTO (JPEG) List
This menu shows JPEG files and folders saved on an USB memory device.

1
2
3

Complete Steps 1 to 3 of “Using the Media Play Menu”. (Refer to page 38)

1/10 Page

Photo

580*440
47KB
Jun 1,2008
3/23

Upper Folder

Press the ◄ or ► button to move to Photo, then press the ENTERE button.
The saved file information is displayed as a folder or file.
Press the ▲, ▼, ◄ and ► buttons to select a file.’
Pressing the ENTERE button over a photo icon shows the currently
selected photo in full screen.
Pressing the ENTERE button over a folder icon shows the JPEG files
included in the folder.

BN68-02315G-01Eng.indd 38

File 4

Folder1

File 5

Photo 0001

None

File 6

File 7

File 8

SUM
895MB/993MB

File 9

File 10

Select

Move

File 11

Option

File 12

Play

File 13

Return

2009-06-08 �� 11:00:29

Viewing a Slide Show

1
2
3

Press the INFO button to display the option View, Start Slide Show, Delete (or
Delete Selected file), Delete All, Deselect All

Slide Show Speed

:Normal

Background Music

:On

Media Play - USB Device

Moving to a photo may take a few seconds to load the file. At this point, the
icon will appear at the top left of the screen.
It takes time to show JPEG files as Thumbnail images.
This menu only shows files whose file extension is jpg. Files of other formats such as bmp or tiff will not be displayed.
The files are displayed on a page. 15 thumbnail photos are displayed per page.
The thumbnails are numbered from left to right and from top to bottom, from 1 to 15.
Certain types of USB Digital camera and audio devices may not be compatible with this TV.
Folders are displayed first and they are followed by all JPEG files in the current folder.
The folders and JPEG files appear in the order of the time they were saved to the USB memory device.
If the photo is displayed in full screen, you can zoom in and out or rotate the photo on the screen.
While a full screen is displayed, ◄ or ► button will let you see another photo image in the same folder.
Press the ∂ button when a Photo icon is selected to start a Slide Show.
Photos without EXIF information may not be displayed as thumbnail images in the PHOTO LIST depending on the picture quality and
resolution.

English

■
■
■
■
■
■
■
■
■
■
■
■

Background Music Setting

Press the ▲ or ▼ button to select Start Slide Show then press the ENTERE
button.

Press the INFO button during the slide show to set the following options (Slide
Show Speed, Background Music, Background Music Setting, List). Press
the ▲ or ▼ button to select the option, then press the ENTERE button.
After setting the option press the ENTERE button to make a change.

Using the Menu in the Photo List
Option
Start Slide Show
Delete / Delete All /
Delete Selected File
(When multiple files are
selected)
Deselect All (When at
least one file is selected)

List
Exit

■ During the slide show, files are
displayed in order from the
currently shown file.
■ MP3 files can be automatically
played during the Slide Show if
the Default Background Music is
set to On. To enable this function,
MP3 files and other photo files
must be located in the same folder
on the USB Memory Device.

Description
You can start a Slide Show.
Select a photo to delete. (Alternatively, select multiple
files by pressing the Yellow button.)
■ You cannot recover a deleted file.

1/10 Page

Photo

580*440
47KB
Jun 1,2008
3/23

Upper Folder

View

Forder1

Photo 0001

None

File 8

File 4

File 5

File 6

File 7

File 9

File 10

File 11

File 12

Select

Move

Start Slide Show

You can deselect all files.
■ Th��
e c mark indicating the corresponding file is
selected is hidden�.

DeleteSUM
Selected file
Delete
All
895MB/993MB
Deselect All
Exit

Option

File 13

Play

Return

Using the Menu during a Slide Show
Option
Slide Show Speed
Background Music
Background Music
Setting
List

BN68-02315G-01Eng.indd 39

Description
Select to control the slide show speed.
Select to choose whether you want to play an MP3 file
during a slide show.
While the slide show is in progress, MP3 files and folders
under the same directory are displayed.
The file information is displayed as a folder or JPEG file.

■ If you turn Off the Background
Music, even if the Background
Music Settings have been set up,
the background music will not be
played.

■ When selecting a photo file, the
photo file information is displayed
on the left side of the TV screen,
such as the resolution, the date
modified and the order of the file
in the current directory.

2009-06-08 �� 11:00:30

40
English
Media Play - USB Device

1
2
3
4

Using the Option Menu
Complete Steps 1 to 3 of “Using the Media Play Menu”.(Refer to page 38)
Press the ◄ or ► button to move to Photo, then press the ENTERE button.
The saved file information is displayed as a folder or file.
Press the ▲, ▼, ◄ and ► button to select a file, then press the ENTERE
button. Pressing the button over a photo thumbnail displays the photo in full
screen.

Start Slide Show
Zoom
Rotate

:X1
:0°

List
Exit

Press the INFO button to display the option (Start Slide Show, Zoom, Rotate,
List)

Option
Start Slide Show
Zoom

Rotate

Description
■ Press the ▲ or ▼ button to select Start Slide Show,
then press the ENTERE button. You can start a
Slide Show.
Press the ▲ or ▼ button to select Zoom, then press the
ENTERE button.
■ Select the required option by pressing the ▲ or ▼
button, then press the ENTERE button. (X1, X2, X4)
■ x1 : Restore a photo to its original size.
■ x2 : Zoom-in to a photo x2.
■ x4 : Zoom-in to a photo x4.
■ d / u / l / r : Move the zoomed-in photo up/down/
right/left.
Press the ▲ or ▼ button to select Rotate, then press the
ENTERE button.
■ Select the required option by pressing the ▲ or ▼
button, then press the ENTERE button. (0°, 90°,
180°, 270°)
■ 0° : This rotates a photo to its original position
■ 90° : This rotates a photo by 90 degrees
■ 180° : This rotates a photo by 180 degrees
■ 270° : This rotates a photo by 270 degrees

■ To pan up/down/left/right in the
zoomed-in photo, press the
INFO button to exit option menu,
then press the ▲, ▼, ◄ and ►
buttons.
■ Start Slide Show or Rotate is
disabled when the Zoom option is
selected.

■ The rotated file is not saved.
■ Start Slide Show or Zoom is
disabled when the Rotate option
is selected.

Using the MP3 List
This menu shows MP3 files from among the files saved on a USB memory
device.

1
2
3
4

Music

SUM
861MB/994MBFree

Complete Steps 1 to 3 of “Using the Media Play Menu”. ������������������
(Refer to page 38)
Press the ◄ or ► button to move to Music, then press the ENTERE button.
The saved file information is displayed as a folder or file.
Photo

Press the ▲ or ▼ button to move to an icon, then press the ENTERE button.
Pressing the ENTERE button over a musical note icon immediately
plays the music file.
Pressing the ENTERE button over a folder icon shows the music files
included in the folder.
To select a file on the next page, press the π or µ button to move to
the next page.
To select all files or a file, press the INFO button to display the Music menus.
Press the ENTERE button to select Play, Repeat Music, Delete, Delete All
or Deselect All. To exit Media Play mode, press the MEDIA.P button on the
remote control.

BN68-02315G-01Eng.indd 40

Music

Move

Setup

Enter

Return
1/10 Page

Music

006-006

00:04:00

Upper Folder

5MB
Jun 1,2008
3/23

Folder 1
001-001