Samsung Messager Ii Metro Pcs Users Manual R560
GH68-23718A to the manual 7dcba2b6-3ccc-4875-ac9c-0c4f16552ef1
SCH-R560 (Metro PCS) - User Manual MetroPCS_R560_Messager_II_ug_F10 Free User Guide for Samsung SCH Series Mobile Phone, Manual - page6
2015-08-20
: Samsung Samsung-Messager-Ii-Metro-Pcs-Users-Manual-795275 samsung-messager-ii-metro-pcs-users-manual-795275 samsung pdf
Open the PDF directly: View PDF 
.
Page Count: 167
| Download | |
| Open PDF In Browser | View PDF |
r560.book Page i Tuesday, June 16, 2009 1:04 PM
( S C H - R 5 6 0
P O R T A B L E
M O B I L E
S e r i e s )
T R I - B A N D
P H O N E
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
r560.book Page ii Tuesday, June 16, 2009 1:04 PM
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to
the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to
Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited
to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation
and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or
otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All
applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA), LLC
Headquarters:
Customer Care Center:
1301 E. Lookout Drive
1000 Klein Rd.
Richardson, TX 75082
Plano, TX 75074
Toll Free Tel:
1.888.987.HELP (4357)
Internet Address: http://www.samsungusa.com
©2009 Samsung Telecommunications America, LLC is a registered trademark of Samsung Electronics America, Inc. and its related
entities.
Do you have questions about your Samsung Mobile Phone?
For 24 hour information and assistance, we offer a new FAQ/ARS System (Automated Response System) at:
www.samsungtelecom.com/support
GH68-23718A
Printed in Korea.
R560.01_CF02_CB_061609_F10
r560.book Page iii Tuesday, June 16, 2009 1:04 PM
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and
other patents pending.
ACCESS® and NetFront™ are trademarks or registered trademarks of ACCESS Co., Ltd. in Japan and other countries.
The Bluetooth® word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered
trademarks and are wholly owned by the Bluetooth SIG.
microSD™ and the microSD logo are Trademarks of the SD Card Association.
Openwave® is a registered Trademark of Openwave, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
r560.book Page 1 Tuesday, June 16, 2009 1:04 PM
Table of Contents
Section 1: Getting Started ..............................................4
Section 5: Entering Text ............................................... 34
Understanding this User Manual . . . . . . . . . . . . . . . . . . . . . . . . 4
Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Activating Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Memory Card (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Built-in QWERTY Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Changing the Text Entry Mode . . . . . . . . . . . . . . . . . . . . . . . . 34
Using T9® Mode (Phone Keypad Only) . . . . . . . . . . . . . . . . . . 35
Using Abc Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Entering Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Entering Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Section 2: Understanding Your Phone ...........................9
Features of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Closed View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Open View (Front) of Your Phone . . . . . . . . . . . . . . . . . . . . . . . 11
Closed Rear View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . 12
Command Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Understanding the Display Screen . . . . . . . . . . . . . . . . . . . . . 14
Your Phone’s Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Section 6: Understanding Your Contacts .................... 38
Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Finding a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Adding a New Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . 40
Editing a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Saving a Number After a Call . . . . . . . . . . . . . . . . . . . . . . . . . 45
Speed Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Contacts Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Deleting a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Metro411 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Memory Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Section 4: Menu Navigation ......................................... 32
Section 7: @metro ........................................................ 52
Section 3: Call Functions ............................................. 21
Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Menu Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Navigate Using Shortcut Icons . . . . . . . . . . . . . . . . . . . . . . . . 32
Navigation Key Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
QWERTY Keypad Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
1
Accessing @metro (Mobile Shop) . . . . . . . . . . . . . . . . . . . . . . 52
Section 8: Messages .................................................... 53
Types of Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Create and Send Text Messages . . . . . . . . . . . . . . . . . . . . . . 53
Receive Text Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
r560.book Page 2 Tuesday, June 16, 2009 1:04 PM
Send Picture Messages in Camera Mode . . . . . . . . . . . . . . . .
Send Picture/Video Messages in Standby Mode . . . . . . . . . . .
Receive Picture/Video Messages . . . . . . . . . . . . . . . . . . . . . .
Message Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Erase Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Message Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
54
56
58
59
65
66
Section 9: MetroWEB .................................................... 68
MetroWEB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Launching MetroWEB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using MetroWEB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
How MetroWEB Keys Work . . . . . . . . . . . . . . . . . . . . . . . . . . .
68
68
69
69
69
Section 10: Voice SVC .................................................. 70
Voice SVC Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Voice Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Voice Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Section 11: Camera-Camcorder .................................. 75
Taking Pictures and Videos . . . . . . . . . . . . . . . . . . . . . . . . . .
Taking Snap Shots (Single Pictures) . . . . . . . . . . . . . . . . . . . .
Screen Layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Saving Pictures and Videos . . . . . . . . . . . . . . . . . . . . . . . . . .
Camera Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Camera Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Camcorder Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Camcorder Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Camera-Camcorder Adjustments . . . . . . . . . . . . . . . . . . . . . .
75
75
77
80
81
84
86
88
89
The Photo Gallery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
The Video Gallery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Point, Click, and Send Pictures and Videos . . . . . . . . . . . . . . 92
Section 12: Multimedia ................................................ 94
Accessing Multimedia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using My Images Gallery . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using Your Music Player . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using My Ringtones Gallery . . . . . . . . . . . . . . . . . . . . . . . . . .
Using My Sounds Gallery . . . . . . . . . . . . . . . . . . . . . . . . . . . .
94
94
95
98
98
Section 13: Tools ........................................................ 100
Accessing Your Phone’s Tools . . . . . . . . . . . . . . . . . . . . . . .
Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Memo Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
World Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stop Watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Converter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
100
100
103
105
106
107
109
110
110
112
Section 14: Settings ................................................... 114
Accessing Your Phone’s Settings . . . . . . . . . . . . . . . . . . . . .
Location Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Call Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
114
114
114
117
118
2
r560.book Page 3 Tuesday, June 16, 2009 1:04 PM
Phone Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Memory Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Phone Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Section 15: Health and Safety Information ............... 132
Health and Safety Information . . . . . . . . . . . . . . . . . . . . . . . . 132
Samsung Mobile Products and Recycling . . . . . . . . . . . . . . . 133
UL Certified Travel Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Consumer Information on Wireless Phones . . . . . . . . . . . . . . 134
Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Responsible Listening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Using Your Phone Near Other Electronic Devices . . . . . . . . . 143
FCC Hearing-Aid Compatibility (HAC) Regulations for
Wireless Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Other Medical Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Potentially Explosive Environments . . . . . . . . . . . . . . . . . . . . 145
Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146
FCC Notice and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Other Important Safety Information . . . . . . . . . . . . . . . . . . . . 147
Product Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Availability of Various Features/Ring Tones . . . . . . . . . . . . . . 148
Battery Standby and Talk Time . . . . . . . . . . . . . . . . . . . . . . . 149
Battery Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Section 16: Warranty Information ............................. 152
Standard Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 152
End User License Agreement for Software . . . . . . . . . . . . . . 155
3
Index ............................................................................ 160
r560.book Page 4 Tuesday, June 16, 2009 1:04 PM
Section 1: Getting Started
This section explains how to start using your Samsung
Messager™ II phone by activating your service, setting up your
Voicemail, or getting an understanding of how this manual is put
together.
Understanding this User Manual
The chapters of this guide generally follow the same order as the
menus and sub-menus in your phone. A robust index for quick
reference to most features begins on page 160.
Also included is important safety information that you should
know before using your phone. Most of this information is near
the back of the guide, beginning on page 132.
• Important: Points out important information about the current feature
that could affect performance, or even damage your phone.
Text Conventions
This manual provides condensed information about how to use
your phone. To make this possible, the following terms and icon
appear in place of repeatedly-used procedural steps:
highlight Use the Navigation key (
) to move a highlighting
effect onto a menu item or screen item of interest.
select
Notes and Tips
Throughout this guide there is text that is set apart from the rest.
These are intended to point out important information, quick
methods for activating features, to define terms, and more. The
definitions for these methods are as follows:
• Notes: Explain alternative options within the current feature, menu, or
sub-menu.
• Tips: Provide quick or innovative methods for performing functions
related to the subject at hand.
➔
After “highlighting” a menu item or screen item,
press the OK key
to launch, access, or save a
highlighted menu item or screen field of interest.
Used in place of “select” in long “drill down”
procedure steps.
Example: “...Settings ➔ Call Settings ➔ Call Answer...”
Installing the Battery
Note: Your phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel adapter.
Getting Started
4
r560.book Page 5 Tuesday, June 16, 2009 1:04 PM
Important!: You must fully charge the battery the first time you use your
phone, otherwise you could damage the battery.
1.
2.
of the battery cover (1) and
lift the cover (2) up and
Insert the top end of the
away from the phone.
battery first, matching the
gold contacts on the inside of
the battery to those on the
Press lightly on the bottom end of the battery down into the
phone until it slips into place.
3.
Press lightly down on the
middle of the battery cover
(1) and upward at the top (2)
until the cover locks into
Remove the Battery
5
Press and hold the
Lift the battery (1) up at the
bottom and away from the
Charging the Battery
Your phone is powered by a rechargeable standard Li-Ion battery.
Only use Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life. Use
of other accessories may invalidate your warranty and may
cause damage.
Use the Travel Adapter
place.
1.
3.
phone (2).
phone.
2.
Press downward at the top
key to turn off the phone (if on).
The travel adapter included
with your phone is a
convenient, light-weight
charger that rapidly charges
your phone from any 120/220
VAC outlet.
r560.book Page 6 Tuesday, June 16, 2009 1:04 PM
1.
Plug the large end of the Travel Adapter into a standard
• An empty battery icon (
120 VAC or 220 VAC wall outlet.
• A blinking empty battery icon (
Important!: For connection to an electrical supply not located in North
America, you must use an adaptor of the proper configuration for
the power outlet. Use of the wrong adapter could damage your
phone and void your warranty.
2.
Insert the smaller end of the Travel Adapter into the
charger/accessory connector on the upper right side of
your phone.
) indicates a near empty battery.
) and a tone sounding indicate you
have two to three minutes before the battery is too low to operate the
phone.
If you continue to use your phone without charging its battery, the
phone will shut down.
Activating Your Phone
Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
Turning Your Phone On
1.
With the phone
closed, press and
hold the
key
until the display
Important!: You must unplug the adapter before removing the battery from
the phone during charging to avoid damage.
Low battery indicator
The battery indicator (
) in the upper-right corner of the
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
• Five bars (
) indicate a full charge.
lights.
Note: As with any other radiotransmitting device, do not
touch the antenna while
using your phone as this
can affect call quality and
can cause the phone to
operate at a higher power
level than is necessary.
Press
& Hold
Internal
Antenna
Getting Started
6
r560.book Page 7 Tuesday, June 16, 2009 1:04 PM
2.
3.
The phone begins searching for a network signal.
2.
key for two
or more seconds. Your phone powers off.
Note: If your phone is on and you press
for less than one second, the
phone will not power off. This prevents your phone from being turned
off accidentally.
Setting Up Your Voicemail
Voicemail allows callers to leave voice messages, which can be
retrieved any time.
Note: Once your Voicemail account has been set up, you can use the
Voicemail folder (under the Message menu) to view details of voice
messages in your Voicemail box.
7
Follow the prompts in the new user tutorial to setup your
Listen to Voicemail
1.
In standby mode, press and hold the
key or dial your
own mobile number to dial Voicemail. After connecting,
you will hear your voice greeting.
Turn Your Phone Off
With the phone closed, press and hold the
key or dial your
mail box.
You’re now ready to place and receive calls.
Note: If you are outside of your carrier’s coverage or roaming area, the No
Service icon (
) appears at the top of the phone’s display. If you
cannot place or receive calls, try later when service is available, or at
another location.
䊳
In standby mode, press and hold the
own mobile number to dial Voicemail.
Once the phone finds a signal, the time, date, and day
appear near the top of the display.
4.
1.
2.
You are prompted to enter your password.
Memory Card (Optional)
Your phone has a Memory Card slot on its left side. You can
install a microSD™ card to provide additional memory for storing
files (such as, sound files and photos) in your phone.
Install a Memory Card
1.
Open the microSD cover on the left hand side of the phone,
r560.book Page 8 Tuesday, June 16, 2009 1:04 PM
as shown.
3.
Slowly release your pressure on the card. It will slide
outward a short distance.
4.
Remove the memory card from the memory card slot.
5.
If desired, install another memory card. (For more
information, refer to “Install a Memory Card” .)
6.
Replace the microSD cover.
Correct
Incorrect
2.
Make sure that the gold contacts of the card are face up,
as shown, then carefully slide the memory card into the
memory card slot until you feel it click into place.
3.
Replace the microSD cover.
Remove a Memory Card
1.
Open the microSD cover on the right hand side of the
phone.
2.
Carefully press the memory card inward until you feel it
release.
Getting Started
8
r560.book Page 9 Tuesday, June 16, 2009 1:04 PM
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also
describes the screen format and the icons that will be displayed
when the phone is in use.
Closed View of Your Phone
Features of Your Phone
• Domestic and international voice and text messaging service (available
on participating networks).
• High speed data (CDMA 2000 1xEVDO Technology)
• Bluetooth® Stereo (v2.0) Wireless Technology (see Note)
• Global Positioning (GPS) Technology
• PIM Functions
• Picture and Video (MMS) Messaging
• Text (SMS) Messaging
• E-mail Messaging
• QWERTY Keypad
• Built-in 2.0 Megapixel Digital Camera-Camcorder
• Music Player (MP3 compatible, requires microSD™ memory card)
• Voice Dial
• Speakerphone
Features
1.
Volume Key — Lets you adjust the ring volume in standby
mode, adjust the voice volume during a call, or mute the
ringer during an incoming call.
Note: The Samsung Messager II supports the wireless Handsfree Profile
(HFP) and OBEX profiles for Bluetooth® wireless technology. The
Samsung Messager II does not support the Bluetooth serial port profile.
9
r560.book Page 10 Tuesday, June 16, 2009 1:04 PM
2.
3.
Left Soft Key — Used to navigate through menus and
scroll through the phone menu options. In Standby mode,
bottom left corner of the Main LCD.
lets you access preset functions and scroll through
Speakerphone Key — Lets you enable/disable
speakerphone mode.
4.
SEND Key — Lets you place or receive a call. In standby
mode, press the key once to access the recent call log.
5.
Memory Card Slot — Lets you insert a microSD™ memory
card for additional storage of images, videos, music,
ringtones, and recorded sound files.
6.
Alpha-numeric Keys — Use these keys to enter
numbers, letters, and characters.
7.
Earpiece / Speaker — Lets you hear ringing and alert
tones, alarm tones, and the other parties to calls.
8.
Display — Indicates the status of your phone, including
numbers dialed, feature and function screens, status
9.
10. Navigation Key / Jog Wheel — In Menu mode, lets you
applications and to select the choice indicated at the
Shortcut Icons.
11. Voicemail Key — Lets you speed dial your Voicemail
account to review your voice messages.
12. Special Function Keys — Enter special characters.
Performs various functions.
13. Microphone — Lets the other party to a call hear you
clearly when you are speaking to them.
14. Power/Accessory Connector — Used to plug in charging
accessories and to connect any available accessory cables
to your phone.
15. Right Soft Key — Used to navigate through menus and
applications and to select the choice indicated at the
bottom right corner of the Main Display.
icons, message indicators, signal strength, and so on.
16. CLR Key — Deletes characters from the display when you
OK Key — In standby mode, launches the Main Menu.
are in text entry mode. Press this key to return to the
Pressing when navigating through a menu accepts the
previous menu or screen when navigating features on your
highlighted choice in a menu.
phone.
Understanding Your Phone
10
r560.book Page 11 Tuesday, June 16, 2009 1:04 PM
17. END Key — Ends a call. If you press and hold the END key,
the power goes On or Off. When you receive an incoming
Features
1.
call, press to send the call to voicemail.
18. Camera / Multimedia Key — Launches the Camera
tones, alarm tones, and the other parties to calls.
2.
feature or the Multimedia menu of your phone.
Display — Indicates the status of your phone, including
numbers dialed, feature and function screens, status
icons, message indicators, signal strength, and so on.
19. Voice Recognition Key — In standby mode, pressing and
holding this key launches Voice SVC options.
Earpiece / Speaker — Lets you hear ringing and alert
3.
Open View (Front) of Your Phone
soft1 Key — Left soft key — Used to navigate through
menus and applications and to select the choice indicated
at the bottom left corner of the Main LCD.
4.
shift Key — Toggles ABC mode capitalization between
ABC, Abc, and abc.
5.
Messaging Key — Launches the Messages menu.
6.
Fn Key — Text Function Key — Toggles text entry mode
between ABC and 123 modes.
7.
space Key — Inserts a space character in a text entry.
8.
Arrow (Navigation) Keys — In Menu mode, lets you
scroll through the phone menu options. In Standby mode,
lets you access preset functions and one user-defined
function.
11
r560.book Page 12 Tuesday, June 16, 2009 1:04 PM
9.
soft2 Key — Right soft key — Used to navigate through
Closed Rear View of Your Phone
menus and applications and to select the choice indicated
at the bottom right corner of the Main Display.
10. OK Key — In standby mode, launches the Main Menu.
When navigating through a menu accepts the highlighted
choice in a menu.
11. Back / Clear Key — Deletes characters from the display
when you are in text entry mode. Press this key to return to
the previous menu or screen when navigating features on
your phone.
12. Speakerphone Key — Lets you enable/disable
speakerphone mode.
13. SEND Key — Lets you place or receive a call. In standby
mode, press the key once to access the recent call log.
14. END Key — Ends a call. If you press and hold the END key,
the power goes On or Off. When you receive an incoming
call, press to send the call to voicemail.
1.
Camera Lens — The lens of your built-in camera.
2.
Speaker Grill — Lets you hear ringing and alert tones,
alarm tones, and the other parties to calls.
3.
Battery Cover — Lets you access your phone’s battery.
Understanding Your Phone
12
r560.book Page 13 Tuesday, June 16, 2009 1:04 PM
4.
Headset Connector — Used to connect a headset or TTY
device to your phone. (For more information, refer to “TTY
Mode” on page 119.)
Command Keys
Functions for the soft keys are defined by what appears above
each in the display. There are two soft keys, the Left soft key
(
or
) and the Right soft key (
or
).
Left Soft Key
Some functions of the Left soft key are as follows:
• In standby mode, press the Menu (left) soft key (
or
) to show
the Main Menu.
• When the Left soft key function is Edit, press the Edit (left) soft key
(
or
) to edit a Contact.
Right Soft Key
Some functions of the Right soft key are as follows.
• In standby mode, press the @metro (Right) soft key (
or
) to
launch the @metro screen.
• When the Right soft key function is Options, press the Options (right)
soft key (
or
) and a pop-up menu appears.
• When the Right soft key function is Back, press the Back (right) soft
key (
or
) to back up one menu level.
13
OK Key
• In standby mode, press the OK key ( or
) to launch the
function or application linked to the icon highlighted in the Icon Bar.
• In a menu, press the OK key ( or
) to accept the highlighted
selection.
• In camera mode, press the Take key ( or
) to take a photo or
to create a Picture message.
• When the OK key function is Edit, press the Edit key ( or
) to
edit a Draft message.
Speakerphone Key
The Speakerphone key (
) is used to place your phone in
Speakerphone mode, allowing you to use your phone handsfree
and/or to share a call with others, such as in an office or
conference room
Clear Key
The C/Back Arrow key (
or
) is used to erase or clear
numbers, text, or symbols from the display. You can also use the
or
key to return to a previous menu.
• If you enter an incorrect character, briefly press
or
to
backspace (and delete) the character.
• To erase the entire sentence, press and hold
or
.
• To back up one menu level, briefly press
or
.
r560.book Page 14 Tuesday, June 16, 2009 1:04 PM
E n d Ke y
• Press and hold the End key
to turn on your phone.
• Briefly press
once to disconnect a call.
• Press
to return to standby mode from any menu, or to cancel the
last input.
Camera / Multimedia Key
Send Key
Understanding the Display Screen
The Send key
is used to answer calls, dial calls, and to
recall the last number(s) dialed, received, or missed.
• Press
once to answer calls.
• Enter a number and briefly press
to make a call.
• Briefly press
in standby mode to display a list of recent calls to
and from your phone.
• Press
twice in standby mode to call the most recent number.
• Press
to pick up a waiting call. Press
again to switch back
to the other call.
Navigation Key
Use the directional keys on the Navigation key
to browse
menus, sub-menus, and lists. Each directional key also acts as a
shortcut to launch applications. (For more information, refer to
“Menu Navigation” on page 32.)
Use the Camera/Multimedia key (
) on the lower right side of
the phone to activate the camera built into your phone and to
take pictures, and to launch the Multimedia menu and access all
of your phone’s multimedia features.
Main Display — Shortcut Icon On
1.
The top line of your
1
phone’s display contains
2
icons that indicate network
3
status, battery power,
signal strength, connection
4
type, and more.
2.
This line contains the
calendar and clock
5
6
showing the current day of
the week, date, and time.
Understanding Your Phone
14
r560.book Page 15 Tuesday, June 16, 2009 1:04 PM
3.
4.
5.
The Auto Answer icon appears beneath the current date to
The top line of your
1
indicate that the Auto Answer function is active. (For more
phone’s display contains
2
information, refer to “Auto Answer” on page 119.)
icons that indicate network
3
The center portion of the display shows information such
status, battery power,
as call progress information, messages, and photos.
signal strength, connection
1.
type, and more.
This line contains the Shortcut Icon bar, provided the
Shortcut Icon option is set to On. (For more information,
2.
the week, date, and time.
functions. The sample screen shows that pressing the Left
or
) will display the Main Menu and
pressing the Right soft key (
or
3.
4.
The center portion of the display shows information such
as call progress information, messages, and photos.
Main Display — Shortcut Icon Off
(For more information, refer to “Shortcut Icon” on page 116.)
The Auto Answer icon appears beneath the current date to
indicate that the Auto Answer function is active.
) will launch
@metro.
5
showing the current day of
The bottom line of the display shows current soft key
soft key (
This line contains the
calendar and clock
refer to “Shortcut Icon” on page 116.)
6.
4
5.
The bottom line of the display shows current soft key
functions. The sample screen shows that pressing the Left
soft key will display the Contacts Find screen, pressing OK
(
) will display the Main Menu screen, and pressing the
Right soft key will show the @metro screen.
15
r560.book Page 16 Tuesday, June 16, 2009 1:04 PM
Rotated Screens
With the QWERTY keypad
open, the display rotates
automatically from portrait
mode (as shown above) to
landscape mode (as shown
here).
Display Screen Icons
Your Samsung Messager II
phone can show you
definitions of the icons that
appear on the top line of
the display.
To access the Icon
Glossary:
䊳
In standby mode, press the Menu soft key, then select
Settings ➔ Phone Info ➔ Icon Glossary. A list appears
showing all of the icons that can appear on the top line of
the display.
Dialogue Boxes
Dialogue boxes prompt for action, inform you of status, or warn
of situations such as low battery. Dialogue boxes and their
definitions are outlined below.
• Choice
• Example: “Save Message?”
• Reconfirm
• Example: “Erase All Messages?”
• Performing
• Example: “Sending...” “Connecting...”
• Completed
• Example: “Message Saved”
• Information
• Example: “New Message”
• Error
• Example: “System Error!”
• Warning
• Example: “Low Battery,” “Memory Full!”
Backlights
Backlights illuminate the display and the keypad. When you press
any key or open the phone, the backlights come on. They go off
when no keys are pressed within a period of time set in the
Backlight menu.
Understanding Your Phone
16
r560.book Page 17 Tuesday, June 16, 2009 1:04 PM
Note: During a phone call, the display backlight dims after 10 seconds and
turns off after 30 seconds to conserve battery power, regardless of the
Backlight setting.
For more information, refer to “Backlight” on page 116.
Your Phone’s Modes
Call Answer Mode
You can choose to answer a call by pressing any key except the
key or
key, by pressing only the
key, or by
opening the phone’s slide. (For more information, refer to “Call
Settings” on page 118.)
Input mode
Input mode determines how you enter text, numbers, and
symbols. While at any text entry screen, press the Left soft key
(
or
), then choose the input mode from the pop-up
menu using the Navigation key. Available input modes are:
• Phone keypad — T9 Word, Abc, 123, and Symbols.
• QWERTY keypad — Abc and 123/Sym.
(For more information, refer to “Entering Text” on page 34.)
Note: With the QWERTY keypad open, use 123/Sym mode instead of Abc to
enter symbols and punctuation in your text. To switch between these
modes, press the
key.
17
Tip: With the phone closed, you can cycle between T9 Word, Abc, and 123
by pressing and holding the
key until the phone beeps, for each
cycle.
Lock Modes
When the phone is in either Key Lock Mode or Device Lock Mode,
restrictions are placed on phone use. You can receive calls and
messages, but cannot place outgoing calls (except for
emergency numbers) until you unlock the phone. Lock Modes
also restrict access to menus and the Volume key.
Manual Keypad Lock Mode
• To lock the keys, in standby mode, press and hold
until
“Keypad is locked!” pops-up in the display.
• To unlock the keys, press the Unlock soft key, then press
.
Automatic Key Lock Mode
• To lock the keys, in standby mode, press the Menu soft key, then
select Settings ➔ Phone Settings ➔ Auto Key Lock ➔ On. (For
more information, refer to “Auto Key Lock” on page 128.)
• To unlock the keys, press the Unlock soft key, then press
.
Device Lock Mode
• To lock the device:
– In standby mode, press the Menu soft key, then select Settings ➔
Phone Settings ➔ Security. You are prompted to enter the device
lock code (password).
r560.book Page 18 Tuesday, June 16, 2009 1:04 PM
– Enter the Phone Lock Code (usually the last four digits of the phone
number assigned to your Samsung Messager II). The Security menu
appears in the display.
– Select Lock Phone ➔ Lock. “Device lock mode set” appears in the
display, and you are returned to standby mode.
• To unlock the device:
– Press the Unlock soft key, You are prompted to enter the device lock
code (password).
– Enter the Lock Code (usually the last four digits of the phone number
assigned to your Samsung Messager II). You are returned to standby
mode.
2.
Press
to return to standby mode.
Receive Messages in Standby Mode
You can receive messages in standby mode. An alert tone sounds
and a notification message appears in the display when a new
message arrives. The following call message options appear:
• View Now — This selection allows you to view the messages
now.
• View Later — This selection allows you to view the messages at a
later date.
䊳 Highlight the desired viewing option and then press
.
Talk Mode
Note: For more information, refer to “Lock Phone” on page 122.
Standby Mode
Standby mode is the state of the phone once it has found service
and is idle. The phone goes into standby mode:
• After you power the phone on.
• When you press
after a call or from within a menu.
In standby mode, you will see the time, day, and date as well as
all phone status icons.
Place Calls in Standby Mode
1.
While in standby mode, enter a phone number, and press
You can place and receive calls only when your phone is on.
While in a call your phone is in talk mode. Press the Options soft
key to display a list of menu options. (For more information, refer
to “In-Use Menu” on page 27.)
Speakerphone Mode
Lets you use your phone handsfree or to share a call with other
people nearby.
• To place your phone in Speakerphone Mode:
䊳
Press and hold the Speakerphone key (
) until
“Speakerphone On” appears in the display.
to place a call.
Understanding Your Phone
18
r560.book Page 19 Tuesday, June 16, 2009 1:04 PM
Caution!: Keep the phone away from you ear while in Speakerphone Mode.
(For more information, refer to “Responsible Listening” on
page 141.)
Vibrate Mode
䊳
(
• To disable Speakerphone Mode:
䊳
Press and hold
until “Speakerphone Off” appears in
Adjust the Ringer
1.
•
•
•
•
Silence the tones your keypad makes when you press a key.
• To enter Silent Mode:
. “Entering Silent
) on the
Options are:
Enter/Exit Silent Mode
Mode” briefly appears in the display and your phone
In standby mode, press the Volume key (
left side of the phone Up or Down.
Note: Your phone automatically enters Speakerphone Mode when you dial a
call using the QWERTY keypad and the called phone begins ringing.
In standby mode, press and hold
) down until Vibrate appears in the display.
The Volume key is on the upper left side of phone.
the display.
䊳
In standby mode, repeatedly press the Volume key
2.
Ringer Off
Vibrate
Low
Low/Medium
•
•
•
•
Medium
Medium/High
High
Vibrate/High
When you are satisfied with the setting, press
or
.
Your phone returns to standby mode.
returns to standby mode.
• To exit Silent Mode:
䊳
While in Silent mode and standby mode, press and hold
Tip: You can also enter the Volume > Voice Calls sub-menu by pressing the
Menu soft key, then pressing the
,
,
, and
keys. Use the
Volume key on the left side of your phone to adjust the ringer volume
setting.
. “Exit Silent Mode” briefly appears in the display
and your phone returns to standby mode.
19
Note: The Vibrate icon ( ) appears in the display when the phone is in
Vibrate mode. The Vibrate/Ring icon (
) appears in the display
when the phone is in Vibrate/High mode.
r560.book Page 20 Tuesday, June 16, 2009 1:04 PM
Camera Mode
Music Player Mode
Camera mode lets you activate your phone’s camera to take
pictures. In Camera mode, you can also adjust the resolution and
appearance of your pictures.
Note: For more information, refer to “Camera-Camcorder” on page 75.
• Entering Camera Mode — In standby mode, press and hold the
Camera key (
) — on the lower right side of the phone.
key.
• Exiting Camera Mode — Press the
Camcorder Mode
Music Player mode lets you activate you phone’s Music Player to
play music files loaded onto an optional microSD™ Memory
Card.
Note: For more information, refer to “Memory Card (Optional)” on page 7
and to “Using Your Music Player” on page 95.
• Entering Music Player Mode — In standby mode, press the Camera
key (
) — on the lower right side of the phone — then select
Music Player.
• Exiting Music Player Mode — Press the
key.
Camcorder mode lets you activate your phone’s camera to take
videos. In Camcorder mode, you can also adjust the resolution
and appearance of your videos.
Note: For more information, refer to “Camera-Camcorder” on page 75.
• Entering Camcorder Mode — In standby mode, press the Camera
key (
) — on the lower right side of the phone — then select
Camcorder.
• Exiting Camcorder Mode — Press the
key.
Understanding Your Phone
20
r560.book Page 21 Tuesday, June 16, 2009 1:04 PM
Section 3: Call Functions
This section provides procedures for making and answering
calls. This section also describes features, such as call logs and
call timers, that help you make calls and manage your call time.
easily dispatch aid, such as police, fire fighting, and emergency
medical personnel.
1.
With the phone on, enter the Emergency Number you wish
to call using the keypad.
Note: The procedures in this section can be performed using the phone
keypad or the QWERTY keypad.
Note: You can define up to 3 emergency numbers in your phone. (For more
information, see “Emergency #” on page 123.)
Tip: When using the QWERTY keypad, it is recommended that you also use
an optional headset or an optional handsfree car kit or that you place
your phone in Speakerphone mode. (For more information, refer to
“Speakerphone Key” on page 13.)
Making a Call
1.
With the phone on, enter the number you wish to call using
the keypad.
2.
Press
to place the call.
Emergency Calls
When you call an Emergency Number, such as 911, your SCHSamsung Messager II phone locks itself in emergency mode, only
allowing you to make calls to the emergency call center you
originally contacted. This enables emergency operators to more
2.
to place the call.
Tip: If you need to make an emergency (911) call with Airplane mode
enabled, just dial the emergency number and press
. (For more
information, see “Airplane Mode” on page 121.)
Three-way Calling
Call two other numbers and connect them to your call using
three-way calling.
1.
In standby mode, enter the number for the first party in
your call, then press
2.
.
When connected, ask the other party to remain on the line.
Press
3.
21
Press
to place them on hold.
Enter the second party’s phone number and press
.
r560.book Page 22 Tuesday, June 16, 2009 1:04 PM
4.
When the second party answers, press
to connect all
three parties.
Use 1-touch dialing to speed dial Contacts from 1 (Voicemail)
through 9.
Manual Pause Calling
To manually call a number with pause(s) without storing it in your
Contacts list:
1.
In standby mode, enter the number you wish to call.
2.
Press the Options soft key. The following pause options
• 2-Sec Pause — A 2-second pause after which dialing resumes.
• Wait — A hard pause (waits for input from you).
3. Highlight the desired pause.
Press the
key or the
Press
In standby mode, press and hold the number key
corresponding to the desired Contact’s speed dial number.
Example: To speed dial the Contact assigned speed dial 5, press and hold
or
.
Use 2-touch dialing to speed dial Contacts from 10 through 99.
1.
to call the number.
In standby mode, press and release the number key
representing the first digit of the desired Contact’s speed
key to enter the highlighted
pause into the number sequence.
5.
䊳
2-Touch Dialing
appear in the display:
4.
1-Touch Dialing
dial number.
2.
Press and hold the number key representing the second
digit of the desired Contact’s speed dial number.
Tip: Press the Save soft key to store pauses along with the number if you
plan to call the number frequently.
Example: To speed dial the Contact assigned speed dial 35, press
then press and hold
or
.
Speed Dialing
3-Touch Dialing
Speed Dialing lets you place a call to any Contact stored in your
Contacts list by dialing the Contact’s Location number.
or
Use 3-touch dialing to speed dial Contacts from 100 through 999.
Call Functions
22
r560.book Page 23 Tuesday, June 16, 2009 1:04 PM
1.
In standby mode, press and release the number key
representing the first digit of the desired Contact’s speed
dial number.
2.
Press the number key representing the second digit of the
desired Contact’s speed dial number.
3.
Use the Call command to dial any number stored in your
Contacts list by saying the name of the contact (Name Dialing).
You can also use Call to dial any telephone number, even
numbers not stored in your contact list, by speaking the
individual digits in the number (Digit Dialing).
Voice Dialing Tips:
Press and hold the number key representing the third digit
• Wait for the beep before speaking.
of the desired Contact’s speed dial number.
• Speak clearly at a normal volume, as if you were talking to someone
on the phone.
Example: To speed dial the Contacts entry assigned to speed dial 325, press
or
, press
or
, then press and hold
or
.
Voice Dialing
The voice recognition capabilities of your Samsung Messager II
are exceptional due to advanced, speaker-independent
technology. This means you do not need to “train” your phone to
understand your voice. You can use your voice in a natural
manner to dial numbers.
• When saying a name, say the first name then the last name.
Dialing a Name
To dial a name, do the following:
1.
In standby mode, press and hold
or
.
“Say a command” appears in the display and is
pronounced through the earpiece.
2.
Say, “Call”.
You are prompted to “Say the name or number”.
Note: End Calls Before relaunching the VoiceSignal voice recognition
software — When you use Voice Dialing to make a call, you must end
that call before you can use other Voice Commands. See “Voice SVC”
on page 70 for more information.
3.
Speak clearly and say the name of a person in your
Contacts list, first name followed by last name.
If the name is recognized, Voice Dial repeats the name and
dials the number.
23
r560.book Page 24 Tuesday, June 16, 2009 1:04 PM
If Voice Dial is not sure which name you said, it displays a
4.
1.
or
.
“Say a command” appears in the display and is
you say?” followed by the first name on the list.
pronounced through the speaker.
Say “Yes” to confirm the name or “No” to hear the next
2.
name, or use the keypad to select the correct name from
the list. (See “Choice Lists” on page 71, for more
information.)
3.
For example, say “7 8 1 9 7 0 5 2 0 0."
If it recognizes the number, Voice Dial repeats it and dials
the number. If Voice Dial is not sure it has recognized the
number, it displays a choice list of up to three numbers and
displays the possible choices and prompts you with
prompts you with “Did you say?” followed by the first
“Which number?”
number on the list.
Say one of the following number types:
Dialing a Number
Speak clearly and say the telephone number of the person
you want to call.
(that is, Mobile, Work, Home, and so on), Voice Dial
• “Home”
• “Work”
• “Mobile”
Voice Dial dials the specified number.
Say “Call”.
VoiceSignal prompts you to “Say the name or number.”
• Press the Repeat soft key to say the name again.
• Press
to exit VoiceSignal without dialing.
If the recognized name has multiple numbers stored for it
5.
In standby mode, press and hold
choice list of up to three names and prompts you with “Did
4.
Say “Yes” to confirm the number or “No” to hear the next
one, or use the keypad to select the correct number from
the list. (See “Choice Lists” on page 71, for more
information.)
• Press the Repeat soft key to say the name again.
• Press
to exit VoiceSignal without dialing.
To dial a number using Voice Dial, do the following:
Call Functions
24
r560.book Page 25 Tuesday, June 16, 2009 1:04 PM
Pause Dialing From a Contacts Entry
• If you voice dial a contact that contains 2-Sec Pause(s) simply wait for
the pauses to pass and the dialing to complete.
• If you voice dial a contact that contains Wait(s), wait for the appropriate
prompt(s) from the number you are calling (credit card number, bank
account number, and so on) and enter the appropriate response(s).
Answering a Call
Incoming
When you receive a call, the phone displays one of the following:
• If the caller can be identified, the caller’s number (or name if it’s in your
Contacts) appears in the display.
• If the caller cannot be identified, Call from unavailable #, Call from
restricted #, or no number appears in the display.
Tip: Assign pictures to Contacts entries. The entry’s assigned picture
appears in the display when you receive a call from that entry. (See
“Assigning a Picture to a Contacts Entry” on page 43).
Call Notification Features
Your phone notifies you of a call in a variety of ways.
• Eight ring volume settings: Ringer Off, Vibrate, Low, Low/Medium,
Medium, Medium/High, High, or Vibrate/High.
• Different ring types or melodies to distinguish callers.
• Name display with caller ID. (If the caller’s name is programmed into
your Contacts).
• Information about the last 90 each of incoming, missed, and outgoing
calls are automatically stored to a call log.
Set Call Ringer Volume
1.
In standby mode, press the Volume key on the left side of
the phone.
2.
Press the Volume key up or down to set the call ringer
volume as desired.
3.
Once you’re satisfied with the setting, press
or
.
The phone returns to standby mode.
The phone continues to notify you of the call until one of the
following events occur:
• You answer the call.
• The calling party ends the call.
• The call is sent to voicemail.
25
Tip: You can also enter the Volume > Voice Calls sub-menu from standby
mode by pressing the Menu soft key, then selecting Settings ➔ Sound
Settings ➔ Volume ➔ Voice Calls. Use the Volume key on the right side
of your phone to adjust the ringer volume setting.
r560.book Page 26 Tuesday, June 16, 2009 1:04 PM
Note: The Vibrate icon (
) appears in the display when the call ringer is
set to Vibrate. The Vibrate/Ring icon (
) appears in the display
when the call ringer is set to Vibrate/High.
2.
In standby mode, press the Menu soft key, then select
Settings ➔ Call Settings ➔ Call Answer.
• Any Key — Pressing any key except ,
answers a call.
• Send Key — Only pressing
answers a call.
2. Select Call Answer option of your choice.
, or
Call Waiting
Caller ID lets you identify who is calling you by displaying a
caller’s number. If the caller’s name and number are stored in
Contacts, the caller’s name also appears. If you’ve assigned a
picture to the entry, it appears in the display as well.
You can prevent your number from displaying on another phone’s
caller ID screen by enabling Call Block.
1.
Note: Contact your Wireless Carrier for availability.
to place the first call on hold, answer the second
call, and ask the caller to remain on the line.
In standby mode, press
,
,
(or
,
,
).
2.
If you’re on a call, your phone beeps when you receive a second
call. Call Waiting lets you answer the second call and alternate
between both calls.
Press
to alternate between calls.
Call Block
The following options appear in the display:
1.
Press
Caller ID
Select from two methods for answering calls. This option can be
changed in the Settings menu.
1.
to place the second call on hold and return to the
first call.
3.
Call Answer
Press
Enter the number you wish to call, then press
.
Silence an Incoming Ring
To temporarily silence the incoming call ringer:
䊳
While your phone is ringing, press the Volume key
(
), on the left side of the phone, up or down.
Ignore an Incoming Call
Ignored calls are immediately forwarded to Voicemail.
Call Functions
26
r560.book Page 27 Tuesday, June 16, 2009 1:04 PM
To ignore an incoming call:
䊳
While your phone is ringing, press the Ignore soft key. The
incoming call is forwarded to Voicemail.
In-Use Menu
You can access a number of menus and features even while in a
call.
1.
Your phone has Call Logs that retain information about Outgoing,
Incoming, and Missed Calls. The Calls menu lets you access this
information for future reference, to return calls, and to add new
Contacts. You can also view times for your last call and the total
of all calls.
While in a call, press the Options soft key. The following
options pop-up in the display:
•
•
•
•
Message — Display the Messages menu.
Contacts — Display the Contacts menu.
Recent Calls — View your recent calls log.
Send DTMF — Send your phone number as DTMF tones to the
other person on the call.
• Voice Privacy — When set to Enhanced, the phone sounds an
audible beep when you loose privacy (encryption) on a CDMA
connection. For this option to work correctly, you must have the
Enhanced privacy option enabled in the Security settings. (This
option is enabled by default.)
• Location — Turn your GPS location on or set GPS location for
emergency calls only.
2. With the above menu displayed, do one of the following:
• Select a menu or feature to access the menu or activate the
highlighted feature.
27
• Press the Cancel soft key to exit the menu.
Calls
Tip: To quickly view a list of your most recent calls (outgoing, incoming, and
missed), briefly press
while in standby mode. The All Calls screen,
listing up to 270 of your most recent calls, appears in the display.
Outgoing Calls
The last 90 outgoing calls are stored in the Outgoing calls log.
Review the Outgoing calls log for the time and date of a call, as
well as other information.
1.
In standby mode, press the Menu soft key, then select
Calls ➔ Outgoing Calls. A list of your outgoing calls
appears in the display.
2.
Highlight a call. You have the following options:
r560.book Page 28 Tuesday, June 16, 2009 1:04 PM
• To compose and send a message to the caller, press the Msg soft
key. The Send Message screen appears in the display. (For more
information, refer to “Create and Send Text Messages” on
page 53 or “Send Picture/Video Messages in Standby
Mode” on page 56.)
• To view further information about the call, press OPEN ( or
).
• To access further options, press the Options soft key. The following
options appear in the display:
– Save — Save the number to your Contacts.
– Details — Contacts calls only — Lets you view the Contacts entry for
the recipient of this call.
– Erase — Erase the selected call from your Outgoing calls list.
– Lock/Unlock — Blocks/permits erasure of the selected call from your
Outgoing call list.
– Erase all — Erase all unlocked calls from your Outgoing call list.
– View Timer — Call Timer screen appears in the display listing the
number and types of calls and their total durations. (See “Call Timer”
on page 29 for more information.)
Select an option to perform its function.
Incoming Calls
The last 90 Incoming calls are stored in your phone’s Incoming
calls log. You can review the Incoming calls log for time and date
of each call, as well as other information.
1.
In standby mode, press the Menu soft key, then select
Calls ➔ Incoming Calls. A list of your Incoming calls
appears in the display.
2.
Highlight a call. You have the following options:
• To compose and send a message to the caller, press the Msg soft
key. The Send Message screen appears in the display. (For more
information, refer to “Create and Send Text Messages” on
page 53 or “Send Picture/Video Messages in Standby
Mode” on page 56.)
• To view further information about the call, press OPEN ( or
).
• To access further options, press the Options soft key. The following
options appear in the display:
– Save — Save the number to your Contacts.
– Details — Contacts calls only — Lets you view the Contacts entry for
the originator of this call.
– Erase — Erase the selected call from your Incoming calls list.
– Lock/Unlock — Blocks/permits erasure of the selected call from your
Incoming calls list.
– Erase all — Erase all unlocked calls from your Incoming calls list.
– View Timer — Call Timer screen appears in the display listing the
number and types of calls and their total durations. (See “Call Timer”
on page 29 for more information.)
Select an option to perform its function.
Call Functions
28
r560.book Page 29 Tuesday, June 16, 2009 1:04 PM
Missed Calls
The last 90 missed calls (calls you did not answer) are stored in
the Missed calls log. Review the Missed calls log for the time and
date of the call, as well as other information.
1.
In standby mode, press the Menu soft key, then select
Calls ➔ Missed Calls. A list of your missed calls appears
in the display.
2.
Highlight a call. You have the following options:
• To compose and send a message to the caller, press the Msg soft
key. The Send Message menu appears in the display. Select the
type of message. (For more information, refer to “Create and
Send Text Messages” on page 53 or “Send Picture/Video
Messages in Standby Mode” on page 56.)
• To view further information about the call, press OPEN ( or
).
• To access further options, press the Options soft key. The following
options appear in the display:
– Save — Save the number to your Contacts.
– Details — Contacts calls only — Lets you view the Contacts entry for
the originator or recipient of this call.
– Erase — Erase the selected call from your Missed calls list.
– Lock/Unlock — Blocks/permits erasure of the selected call from your
Missed calls list.
– Erase all — Erase all unlocked calls from your Missed calls list.
29
– View Timer — Call Timer screen appears in the display listing the
number and types of calls and their total durations. (See “Call Timer”
on page 29 for more information.)
Select an option to perform its function.
Erase Logs
You can erase Outgoing, Incoming, Missed, or All Calls.
Erase All Calls
1.
In standby mode, press the Menu soft key, then select
Calls ➔ All Calls. The All Calls list appears in the display
with the first call in the list highlighted.
2.
Press the Options soft key, then select Erase all. “Erase
all entries?” prompts you to confirm erasure of all Calls
log entries.
3.
To Erase all calls, press the Yes soft key. To keep the calls,
press the No soft key.
Call Timer
View the duration of your last call, total calls, and calls made
during the life of your phone using the Call timer feature. Call
timer is not for billing purposes.
r560.book Page 30 Tuesday, June 16, 2009 1:04 PM
1.
In standby mode, press the Menu soft key, then select
Calls ➔ Call Timer. The following options appear in the
display:
• Last Call — Shows the duration of your last call.
• Outgoing Calls — Shows the number and total duration of all
calls originated by your phone since the last reset.
• Incoming Calls — Shows the number and total duration of all
calls made to your phone since the last reset.
• Roaming Calls — Shows the number and total duration of all
calls originated by and made to your phone while roaming and
since the last reset.
• All Calls — Shows the number and total duration of all calls
originated by and made to your phone since the last erasure.
• Last Reset — Shows the date and time all counters, except
Lifetime Calls, were reset.
• Lifetime Calls — Shows the duration of all calls on your phone
since activation (Lifetime timers cannot be reset).
2. If desired, highlight a particular timer.
3.
Press the Reset soft key to reset the highlighted timer.
Press the Reset All soft key to reset all of the timers
except Lifetime Calls.
4.
Press
to exit the Call Timer screen.
Note: Although Total call timers can be erased, LifeTime call timers can
never be erased.
Data Counter
Use Data Counter to view the amount of data that has been sent
or received (or a total of both) using the data services that your
phone supports. The Data Counter can be a helpful tool for
monitoring data usage, especially if your service agreement has
specified limits.
1.
In standby mode, press the Menu soft key, then select
Calls ➔ Data Counter. The following options appear in
the display:
• Transmit KB — Shows the amount of data (in kilobytes) that your
phone has transmitted since last being reset.
• Received KB — Shows the amount of data (in kilobytes) that your
phone has received since last being reset.
• Total — Shows the amount of data (in kilobytes) that your phone
has transmitted and received since last being reset.
• Last Reset — Shows date and time the Data Counters (except
Lifetime Data Counter) were last reset.
• Lifetime Data Counter — Shows the amount of data (in
kilobytes) that your phone has transmitted and received since being
activated.
Call Functions
30
r560.book Page 31 Tuesday, June 16, 2009 1:04 PM
2.
To reset a timer other than Lifetime Data Counter, highlight
the timer you want to reset and press the Reset soft key.
3.
Press
Store Numbers from Call Logs
Store numbers from your Outgoing, Incoming, Missed, and All
calls logs to Contacts.
Tip: In standby mode, briefly press
to display the Recent Calls list. You
can then select any call in the list to save to Contacts.
1.
In standby mode, press the Menu soft key, then select
2.
Press the corresponding number on the keypad to view
Calls.
call logs for the following call types:
•
•
•
31
4.
for Outgoing Calls
for Incoming Calls
for Missed Calls
.
Press the Options soft key, then use the Up and Down
navigation keys to highlight Save.
to exit the Data Counter screen.
Note: Although other data counters can be reset, only the Lifetime Data
Counter can never be reset.
•
for All Calls
Use the Up and Down navigation keys to highlight the
number you wish to store in Contacts and press
To reset all timers except Lifetime Data Counter, press the
Reset All soft key.
4.
3.
5.
Select Create New to add the number as a Contacts entry,
or select Update Existing to find a Contact with which to
associate the new number.
6.
Follow the prompts to store the number to Contacts.
r560.book Page 32 Tuesday, June 16, 2009 1:04 PM
Section 4: Menu Navigation
Menu Shortcuts
This section explains the menu navigation for your phone.
Menu Navigation
Access the menus and sub-menus in your phone using the
Navigation key (
), the arrow keys (
,
,
,
),
and soft keys (
or
), or use a shortcut.
1.
Example: To jump to the Outbox sub-menu, press the Menu soft key, then
press
or
(for Messages) and
or
for Outbox.
In standby mode, press the Menu soft key. The first of
several menus appears in the display.
2.
Use the Navigation key to browse through the menus.
3.
Press
or
Navigate Using Shortcut Icons
You can also access menus and sub-menus using Shortcut Icons,
and without the menu-based drill down.
to enter the menu or sub-menu that
appears in the display.
4.
Press the Back soft key or press
Use shortcuts to quickly access menus and sub-menus. Press
the Menu soft key, then press the number to the left of the menu
label to jump to the desired menu, sub-menu, or feature.
1.
or
to return to
Navigation key Left or Right to
the previous menu.
Return to the Previous Menu
• Press the Back soft key to return to a previous menu.
• When Back does not appear in the display, press
or
return to the previous menu.
In standby mode, press the
show the desired shortcut
icon. The name of the
shortcut icon appears above
it.
to
2.
Press the OK soft key to
launch the related application.
Menu Navigation
32
r560.book Page 33 Tuesday, June 16, 2009 1:04 PM
Navigation Key Shortcuts
In standby mode and with the QWERTY keypad closed and
Shortcut Icon set to On, press the Navigation key Up or Down to
launch the corresponding applications in the pattern shown here.
QWERTY Keypad Shortcuts
In standby mode and with the QWERTY keypad open, you have
the option of using the arrow keys on the QWERTY keypad itself
to launch applications, as shown here.
Contacts
Left
Navigation
Note: In standby mode and with the QWERTY keypad open, the Navigation
key shortcut pattern rotates 90o to match the screen.
Right
Navigation
With Shortcut Icon On
Contacts
Messages
With Shortcut Icon Off
In standby mode and with the QWERTY keypad closed and
Shortcut Icon set to Off, press the Navigation key Up, Down, Left,
or Right to launch the corresponding applications in the pattern
shown here.
Left
Navigation
Messages
With Shortcut Icon Off
Contacts
MetroWEB
Right
Navigation
Contacts
@metro
MetroWEB
@metro
Messages
Messages
33
r560.book Page 34 Tuesday, June 16, 2009 1:04 PM
Section 5: Entering Text
This section outlines how to select the desired text entry mode
when entering characters using the phone keypad or the nested,
QWERTY keyboard-style keypad. This section also describes how
to use the T9 predictive text entry system to reduce the number
of key strokes needed to enter text.
Built-in QWERTY Keypad
Display
Your Samsung Messager II has a built-in, keyboard-style keypad,
commonly called QWERTY, that you can access by sliding it open
from beneath the top section of the phone. This also
automatically rotates the image in the display to show
information in a wider, landscape format. Using the QWERTY
keypad, you can type letters, numbers, punctuation, and other
special characters into text entry fields or other applications
simpler and faster than using the telephone keypad.
Note: Two of your phone’s functions (@metro and MetroWEB) call for you to
use the QWERTY keypad. Other functions requiring text entry (such as,
Messaging and Memo Pad) accept text entry from whichever keypad
you prefer.
Changing the Text Entry Mode
Clear
Key
Left Soft
Key
Fn (Input
Mode) Key
Navigation
Keys
Right
Soft Key
Text messages can be made up of alphabetical characters,
numbers, and symbols. You can use the following text entry
modes to simplify text entry:
• T9 Word — Press each phone key only once to enter the letter of the
word that you’re spelling. T9 WORD mode letter options are:
– T9 Word — Enter initial capital letters
– T9 WORD — Enter all upper case letters
– T9 word — Enter all lower case letters
Entering Text
34
r560.book Page 35 Tuesday, June 16, 2009 1:04 PM
Note: T9 Word does not support the QWERTY keypad, which does not need
this function.
• Abc — Enter letters, numbers, and symbols by using the QWERTY
keypad or by repeatedly pressing each phone key until the desired
character (as shown on the key) appears in the display. ABC mode
letter options are:
– Abc — Enter initial capital letters
– ABC — Enter all upper case letters
– abc — Enter all lower case letters
• 123 — Enter numbers by pressing the corresponding keys on the
phone keypad or the QWERTY keypad.
Tip: Using the QWERTY keypad, also use 123 mode to enter symbols into
your message simply by pressing the keys labeled with the symbols you
want.
• Symbols — Using the phone keypad, enter a symbol into your
message by pressing the number above the symbol in the Symbols
pop-up window.
The current text entry mode (T9 Word, Abc, ABC, 123, or
Symbols) is indicated in the lower part of a text entry screen. To
change the text entry mode, do the following:
1.
35
While composing a text message, press the Left soft key.
The following options appear in the display:
• T9word
• T9Word
• T9WORD
• abc
• Abc
• ABC
• 123
• Symbols
• Add T9 Word
2. Select the desired text entry mode.
Using T9® Mode (Phone Keypad Only)
T9 Word recognizes commonly used words for the numeric
sequence of key presses and inserts the word into your message.
T9 Word is much faster than the traditional method of text entry
(Abc) and requires only one key press per letter of the word that
you’re spelling.
1.
While composing a text message, press the Left soft key,
then select T9Word.
r560.book Page 36 Tuesday, June 16, 2009 1:04 PM
• For practice, enter the word “Samsung” by pressing each of the
following keys only once:
3.
Enter the word you want to add to the T9 Word dictionary.
Note: In Add T9 Word mode, you enter a word using the same multiple
keypress method as when in Abc text entry mode.
S
A
M
S
U
N
G
T9 Word recognizes that the most commonly used word for the
numeric sequence you just entered is “Samsung.”
If more than one word shares the same numeric sequence, T9 Word
provides the most commonly used word, any additional words appear in
a pop-up window, in which you can select a desired word.
Note: To enter a space, press
. To enter a period, press
. These key
functions apply to both T9 Word and Abc modes. For other symbols,
see “Entering Symbols” on page 37
Adding Words to the T9 Word Dictionary
If pressing the keys corresponding to a word you want to enter
and then scrolling through the pop-up list does not display that
word, do the following:
1.
Clear the word by pressing and holding
2.
Change the text entry mode to Add T9 Word.
.
Note: See “Changing the Text Entry Mode” on page 34 for instructions on
changing the text entry mode to Add T9 Word.
4.
Press
. The word is added to the T9 dictionary.
Using Abc Mode
1.
While composing a text message, do one of the following:
• Using the QWERTY keypad, press
until “Abc” appears in the
lower left corner of the display.
• Using the phone keypad, press the Left soft key, then select Abc.
2. Enter characters while in Abc mode by using one of
following keypads:
• Using the QWERTY keypad, press the key labeled with the desired
character (such as, press
for “G” and
for “H”).
• Using the phone keypad:
– Press the key repeatedly until the desired character appears in the
display (such as, press
once for “G” and twice for “H”).
– Pause briefly and the displayed character is accepted and inserted into
your message.
– Press
to enter a space and press
to enter a period.
Entering Numbers
Enter numbers into a text message while in 123 mode.
Entering Text
36
r560.book Page 37 Tuesday, June 16, 2009 1:04 PM
1.
While composing a text message, do one of the following:
• Using the QWERTY keypad, press
until “123/Sym” appears
in the lower left corner of the display.
• Using the phone keypad, press the Left soft key, then select 123.
2. Enter numbers while in 123 mode by pressing the key
labeled with the corresponding number that you wish to
insert into your message.
Entering Symbols
Enter symbols such as “@” or “%” into a text message.
䊳
While composing a text message, enter symbols by using
one of following keypads:
• Using the QWERTY keypad:
– Press
until “123/Sym” appears in the lower left corner of the
display, or press the Left soft key, then select Symbols.
– Press the key(s) labeled with the corresponding symbol(s) that you wish
to insert into your message, or use the Left and Right soft keys to page
through the other symbols, if desired.
• Using the phone keypad:
– Press the Left soft key, then select Symbols. The first of three symbol
screens appears in the display.
– Use the Left and Right soft keys to page through the other symbols, if
desired.
37
– Press the key that corresponds with the symbol that you wish to enter.
For example, press
for an exclamation point (!).
– Repeat these steps to insert additional symbols into your message.
r560.book Page 38 Tuesday, June 16, 2009 1:04 PM
Section 6: Understanding Your Contacts
This section details how you can manage your daily contacts by
storing their names and numbers in your Contacts list. You can
have your Contacts entries sorted by name.
Note: Although the procedures in this section are written for the phone
keypad, you can also perform these procedures using the QWERTY
keypad.
Contacts
Up to 1000 entries can be stored in Contacts. Each entry can
have up to five associated phone numbers and one e-mail
address. Each phone number can be up to 32 digits in length,
including 2-Sec or Wait pauses (see “Manual Pause Calling” on
page 22 for more information), and associated names can be up
to 32 characters in length. You can assign the Speed Dial
numbers of your choice for each entry. You can also mark your
Contacts list as Restricted to prevent unauthorized viewing. (See
“Restriction” on page 125 for more information).
Tip: Speed Dial One-Touch Dialing, Two-Touch Dialing, and Three-Touch
Dialing allow you to call numbers stored in Contacts faster.
Open Contacts
1.
In standby mode, press the Menu soft key, then select
Contacts.
The following options appear in the display:
• Find — Find a phone number By Name.
Tip: You can also access the Find option from standby mode, by pressing the
Contacts shortcut (Up Navigation) key.
• Add New Contact — Add a number or e-mail address to your
Contacts.
• Speed Dial — Assign a Contacts entry to a Speed Dial number.
(See “Speed Dial” on page 46 for more information.)
• Group — Review, send messages to, add Contacts to, or rename
four out of your five groups. (See “Contacts Groups” on page 47
for more information.)
• Metro411 — Launches Metro411 Directory Assistance. (For more
information, contact your Wireless Carrier.)
• Memory Info — Display used and available memory for Contacts
entries.
Understanding Your Contacts
38
r560.book Page 39 Tuesday, June 16, 2009 1:04 PM
Tip: To launch the Contacts menu using a voice command — In standby
mode, press and hold
until the phone prompts, “Say a
command.” Say “Go to Contacts” into the microphone.
2.
Select the desired option.
Tip: You can also press the keypad number key that corresponds to the
menu option number.
Finding a Contacts Entry
Voice Method
Note: The Lookup command shows the requested contact information in the
display but does not dial any phone numbers for the contact.
to launch Voice
SVC.
“Say a Command” appears in the display and is
pronounced through the speaker.
2.
39
Say “Lookup”.
Speak clearly and say the full name of the person you want
to call, exactly as it is entered in your Contacts list.
• If VoiceSignal recognizes the name you said, the contact
information for that name appears in the display.
• If VoiceSignal does not recognize the name you said, a choice list of
up to three names appears in the display, and VoiceSignal prompts
you with “Did you say?” followed by the first name on the list.
4. Say “Yes” to confirm the name or “No” to hear the next
the list. (See “Choice Lists” on page 71, for more
information.)
• To say the name again, press the Repeat soft key.
• To exit VoiceSignal without dialing, press
.
5. The contact information for the name you selected appears
in the display.
To look up information for a specific contact:
In standby mode, press and hold
3.
name, or use the keypad to select the correct name from
Use the Voice SVC Lookup command to view contact information
for any named contact stored in your Contacts list by saying the
name.
1.
Voice SVC prompts you to “Say the name.”
•
•
•
•
To dial the number associated with the name, press
.
To erase this entry from your Contacts list, press the Erase soft key.
To add or change information for this entry, press EDIT ( ).
For more options, press the Options soft key and the following
options pop-up in the display:
– Send Txt Msg
r560.book Page 40 Tuesday, June 16, 2009 1:04 PM
–
–
–
–
Send Pic Msg
Send Video Msg
Call
Send Name Card Via Bluetooth
Shortcut Key Method
If you’ve stored a name entry in Contacts, Find allows you to find
it quickly.
1.
In standby mode, press Contacts shortcut (Up navigation)
key.
The Find screen appears in the display with the Go To field
and the first Contacts entry highlighted.
Tip: You can also access the Find screen from the Contacts menu by
selecting Find.
2.
Enter a name as entered in Contacts. For example, if you
saved the name as “Amy Smith”, begin the search by
pressing
or (for “A”).
As you enter letters, the names of the closest matches
appear in the display.
3.
When the desired entry is listed in the display, highlight the
entry.
• To dial the default number associated with the name, press
.
Tip: You can select another number assigned to the name by using the Left/
Right navigation keys.
• To add or change information for this entry, press the Edit soft key.
• To show information about the entry., press VIEW ( )
• For more options, press the Options soft key and the following
options pop-up in the display:
– New Contact — Add a new entry to Contacts.
– Erase — Erase the name and associated information.
– Send Txt Msg — Create and send a text message to the selected
Contact.
– Send Pic Msg — Create and send a picture message to the selected
Contact.
– Send Video Msg — Create and send a video message to the selected
Contact.
– Call — Dial the number associated with the name.
– Send Name Card Via Bluetooth — Send a copy of a Contacts entry
to another Bluetooth device.
Select an option. The selected option’s sub-menu appears in the
display.
Adding a New Contacts Entry
You can use either of two methods to add an entirely new entry to
Contacts.
Understanding Your Contacts
40
r560.book Page 41 Tuesday, June 16, 2009 1:04 PM
Dial Method
1.
5.
your Contacts.
2.
Press the Save soft key.
The following options appear in the display:
• Create New — Lets you create a new Contacts entry.
• Update Existing — Lets you add the number you entered to an
existing Contacts entry.
3. Select Create New. The Create New screen appears in the
6.
1.
Work
Pager
Fax
4.
Select the number type that matches your new entry.
to save the new entry.
From the Contacts menu, select Add New Contact.
Name field highlighted.
2.
Enter the name of the new entry using either keypad. (See
“Entering Text” on page 34 for more information.)
Highlight one of the following fields:
• Mobile
• Home
• Work
• Pager
• Email
• Group
• Ringtone
• Fax
4. Enter a phone number or e-mail address in the highlighted
field.
41
or
The Add New Entry screen appears in the display with the
3.
Home
Press
Menu Method
display showing the following icons:
Mobile
Use the keypad to enter a name to associate with the
Contacts entry.
Using the keypad, enter the number you wish to add to
r560.book Page 42 Tuesday, June 16, 2009 1:04 PM
5.
Repeat steps 3 and 4 as needed.
6.
Press
or
– Set as default — Set the number the phone will dial when Contacts
dialing, speed dialing, or voice dialing.
– Wait — A hard pause (waits for input from you).
– 2-Sec Pause — A 2-second pause after which dialing resumes (see
“Add Pauses to Contacts Numbers” on page 42 for more
information).
to save the new entry.
Editing a Contacts Entry
Editing Contacts Name and Numbers
1.
Find the Contacts entry you wish to change. See “Finding a
Contacts Entry” on page 39 for more information.
2.
Highlight the entry and press VIEW (
or
). The View
Contact screen appears in the display showing the
highlighted entry’s information.
3.
Use the Up/Down navigation keys to review the information
for the entry that you wish to change, then press EDIT (
or
4.
). The Edit Contact screen appears in the display.
Highlight the particular information you want to add or
change.
• To backspace and delete numbers or letters, press
or
.
• To clear all numbers or letters in the highlighted field, press and
hold
or
.
• For more options, press the Options soft key and the following
options pop-up in the display:
– Set Speed Dial / Remove speed dial — Assign/remove a speed dial
number (see “Speed Dial” on page 46 for more information).
5.
Select the desired option.
When you’re finished changing the contents of a field,
press
or
. Your changes are saved and a
confirmation message appears in the display.
Add Pauses to Contacts Numbers
Calls to automated systems such as banking services often
require a password or account number. Instead of manually
entering these numbers, you can store them in a Contacts entry
with the phone number and with special characters called
pauses, up to a maximum of 32 digits.
• Wait — Stops the calling sequence until the phone receives further
input.
• 2-Sec Pause — Stops the calling sequence for two seconds, then
sends the remaining digits.
Understanding Your Contacts
42
r560.book Page 43 Tuesday, June 16, 2009 1:04 PM
Note: You can enter multiple Waits to extend the length of a pause. For
example, two consecutive Waits cause a total pause time of four
seconds. Keep in mind that pauses count as digits towards the 32-digit
maximum.
To add pauses to a Contacts entry number, do the following:
1.
Find the Contacts entry associated with the number you
2.
from Contacts and wait for the appropriate prompt from
the dialed number.
3.
3.
2.
Select and edit the desired number. (See “Editing a
Highlight the desired Contacts entry, then press the Edit
soft key.
Press the Options soft key. The following pause options
The Edit Contact screen appears in the display.
• Wait — A hard pause (waits for input from you).
• 2-Sec Pause — A 2-second pause after which dialing resumes.
4. Select the desired pause to add it to the number sequence.
When you’re finished entering information, press
or
to store the number to Contacts.
Pause Dial from Contacts
1.
Find the Contacts entry you want to edit. (See “Finding a
Contacts Entry” on page 42 for more information.)
appear in the display:
5.
to dial the number.
Contacts Entry” on page 39 for more information.)
Contacts Entry” on page 39 for more information.)
2.
Press
Edit an Existing E-mail Address
1.
want to include one or more pauses. (See “Finding a
If you stored the number using Wait(s), recall the number
If you stored the number using 2-second pause(s), simply
recall the number from Contacts.
3.
Highlight the Email field.
4.
Use either keypad to edit the e-mail address. (See
“Entering Text” on page 34 for more information.)
5.
Press
or
to save your changes.
Assigning a Picture to a Contacts Entry
When you assign a picture to a Contacts entry, the picture you
assign appears in the display when you receive a call from that
Contact.
1.
Find the Contacts entry you want to edit. See “Finding a
Contacts Entry” on page 39 for more information.
43
r560.book Page 44 Tuesday, June 16, 2009 1:04 PM
2.
Highlight the desired Contact, then press the Edit soft key.
The Edit Contact screen appears in the display.
3.
Highlight the Picture ID field (at the top of the Edit
Contact screen), then press the Set soft key.
Assigning a Ringtone to a Contacts Entry
When you assign a ringtone to a Contacts entry, the phone plays
the ringtone that you assign when you receive a call from that
Contact instead of the Voice Calls ringtone.
1.
A photo gallery screen appears in the display, showing a
series of thumbnail photos. (See “Using My Images
Gallery” on page 94 for more information.)
4.
Select the picture that you wish to assign to the Contacts
entry.
Contacts Entry” on page 39 for more information.
2.
Highlight the desired Contact, then press the Edit soft key.
The Edit Contact screen appears in the display.
3.
Highlight the Ringtone field, then press the Set soft key.
The Contact Tone menu showing the following options
If there is no usable picture in the photo gallery screen:
• Press the Camera soft key. The camera viewfinder screen appears
in the display.
• Press the
soft key ( or
). The picture you have
taken appears in the display.
• Press the
soft key ( or
).
5. The Contacts entry screen appears in the display with a
6.
Find the Contacts entry you want to edit. See “Finding a
appears in the display:
• My Ringtones
• My Sounds
4. Select the desired option. The My Ringtones file list or the
My Sounds file list appears in the display.
5.
Select the ringtone or sound that you wish to assign to the
thumbnail view of the selected picture in the Picture ID
Contacts entry. The Contacts entry screen appears in the
field.
display with the name of the selected file in the Ringtone
Press
or
to save your Picture ID assignment.
field.
Understanding Your Contacts
44
r560.book Page 45 Tuesday, June 16, 2009 1:04 PM
6.
Press
or
to save the ringer assignment to the
selected Contacts entry.
Create a New Entry
1.
Saving a Number After a Call
From the Save screen, select Create New. The Create
New screen appears in the display showing the following
number type options:
Once you finish a call, you can store the caller’s number to your
Contacts list.
Mobile
Note: If the call was incoming and Caller ID information was unavailable,
then the Save option is also unavailable.
1.
Press
Home
to end your call. The call time, length of call,
Work
phone number, and name of the party (if available) appear
2.
in the display.
Pager
Press the Save soft key. The Save screen appears in the
Fax
display showing the following options:
• Create New — Lets you create a new Contacts entry.
• Update Existing — Lets you add the number you entered to an
existing Contacts entry.
3. Select the desired option, then follow the instructions in
2.
Select the number type that matches your new entry.
3.
Enter a name for the new entry. (See “Entering Text” on
the upcoming sub-sections depending on whether the
4.
number is a new entry or you are adding it to an existing
entry.
45
page 34 for more information.)
Press
list.
or
to save the new entry to your Contacts
r560.book Page 46 Tuesday, June 16, 2009 1:04 PM
Add to an Existing Entry
1.
3.
number posted in the appropriate number type field.
Update Existing screen appears in the display showing
your Contacts list with the Go To field and the first
Contacts entry highlighted.
2.
Find and select the Contacts entry to which you want to
add the new number. (See “Finding a Contacts Entry” on
page 39 for more information.)
The following number type options appear in the display:
Mobile
Home
Work
Pager
Fax
Note: Number types that are already assigned a number show the number
instead of the number type label.
Select the desired unassigned number type. The Contacts
entry information appears in the display with the new
From the Save screen, select Update Existing. The
4.
Press
or
to save your changes to the existing
entry.
Speed Dial
A Contacts entry’s Speed Dial number corresponds to the number
keys you press to speed dial one of that entry’s numbers. For
example:
• To speed dial the Contacts entry assigned to Location 5, press and hold
or
, (1-touch dialing).
• To speed dial the Contacts entry assigned to Location 35, press
or
then press and hold
or
, (2-touch dialing).
• To speed dial the Contacts entry assigned to Location 235, press
or
, press
or
, then press and hold
or
,
(3-touch dialing).
You can assign one or more Speed Dial numbers to a Contacts
entry during new entry creation or by editing an existing entry.
Assignment During Entry Creation
To assign a Speed Call number to a new Contacts entry number,
do the following:
Understanding Your Contacts
46
r560.book Page 47 Tuesday, June 16, 2009 1:04 PM
1.
Follow either of the New Contacts entry procedures (see
“Adding a New Contacts Entry” on page 40) until you enter
a name for the entry.
2.
1.
. Instead, highlight the number field to be assigned
a Speed Dial number.
4.
Highlight the desired entry, then press the Edit soft key.
3.
Highlight the number field marked by the Speed Dial icon
(
4.
).
Press the Options soft key, then select Remove speed dial.
“Remove speed dial?” prompts you to confirm your
Unassigned Speed Dial number in the Go To field using
desire to remove the entry.
5.
Press SET (
or
). You are prompted to confirm your
Speed Dial number assignment.
Press the Yes soft key to save your Speed Dial assignment
and return to the Add New Entry screen.
Press the No soft key to discard the assignment and return
to the Speed Dial screen.
47
Find the Contacts entry you want to edit. See “Finding a
Contacts Entry” on page 39 for more information.
Press the Yes soft key to remove the Speed Dial
assignment. “Speed Dial Removed” pops up in the
Important!: Do not enter Speed Call numbers 1 or 911. These numbers are
already assigned to Voicemail (001) and to emergency use (911).
6.
to save your changes.
Highlight an Unassigned Speed Dial number or enter an
either keypad.
5.
or
2.
Press the Options soft key, then select Set Speed Dial. The
Speed Dial screen appears in the display.
Press
Changing a Speed Dial Location
After entering the Contacts entry name, do not press
or
3.
7.
display, and you are returned to the Edit Contact screen.
6.
Do steps 2 through 7 of the “Assignment During Entry
Creation” procedure on page 46.
Contacts Groups
Contact Groups let you easily send messages to multiple,
selected Contacts. You can also use Groups to find Contact
entries and to add/remove Contacts names in a Group or to
create or rename a Group.
r560.book Page 48 Tuesday, June 16, 2009 1:04 PM
Add Contacts Entry to a Group
3.
Using Add New/Edit Contact Option
Contact.
To add a Contact to a Group using either the Add New Contact
option or the Edit Contact option, do the following:
1.
add to a Group.
– Or –
Find a Contacts entry (see “Finding a Contacts Entry” on
page 39 for more information) that you want to add to a
2.
You are returned to the Add New Entry/Edit Contact
screen and the selected Group name populates the Group
Create a Contacts entry (see “Adding a New Contacts
Entry” on page 40 for more information) that you want to
Select the Group to which you want to assign the selected
field.
4.
Press
or
to save your changes.
Using Group Add Option
The Add option lets you add one or more existing Contacts to a
Group.
1.
From the Contacts menu, select Group.
Group.
The Group List screen appears in the display showing
Highlight the Group field, then press the Set soft key.
Groups similar to the following:
The Select Group screen appears in the display showing
Groups similar to the following:
•
•
•
•
•
No Group
Business
Colleague
Family
Friends
• No Group
• Business
• Colleague
• Family
• Friends
2. Highlight a Group, then press the Options soft key. The
following options pop-up in the display:
• Send Txt Msg
Understanding Your Contacts
48
r560.book Page 49 Tuesday, June 16, 2009 1:04 PM
• Send Pic Msg
• Send Video Msg
• Rename
• Erase
• Add
3. Select Add. The Add Contacts screen appears in the
Rename a Group
The Rename option lets you change the name any of the Groups,
except No Group.
1.
screen appears in the display.
2.
display showing a list of Contacts entries.
4.
3.
• Highlight a Contacts entry you want to add to the group, then press
MARK ( or
). A checkmark appears in the entry’s
checkbox.
Repeat as needed to check all the desired Contacts.
• Press the Mark All soft key.
4.
group” appears in the display, followed by the selected
Group list including the added Contacts.
Select Rename.
The Rename Group screen appears in the display.
Enter changes to the group name using either keypad.
(See “Entering Text” on page 34 for more information.)
5.
When you have completed your changes to the Group
name, press SAVE (
or
Group List screen showing your renamed Group.
Add a New Group
The New option lets you add Groups.
1.
From the Contacts menu, select Group. The Group List
screen appears in the display.
49
).
“Group Renamed” appears in the display followed by the
When you have marked the Contacts you want to add to
the group, press the Done soft key. “Contact added to
Highlight a Group name (other than No Group) that you
wish to change, then press the Options soft key.
Do one of the following:
Note: To unmark a marked Contact, highlight the Contact and press MARK
(
or
) to clear the checkmark.
5.
From the Contacts menu, select Group. The Group List
r560.book Page 50 Tuesday, June 16, 2009 1:04 PM
2.
Press the New soft key. The New Group screen appears in
the display.
3.
1.
Press SAVE (
or
2.
the erasure.
display followed by the Group List screen showing your
3.
Erase a Group
The Erase option lets you delete a Group, thus freeing you to
reassign the Contacts formerly in the Group.
1.
From the Contacts menu, select Group. The Group List
screen appears in the display.
2.
Press the Yes soft key to confirm erasure of the selected
Contact. Press the No soft key to retain the Contact.
Metro411
The Metro411 menu option lets you access Metro411 Directory
Assistance service.
1.
Open the QWERTY keypad.
Highlight the Group you wish to delete, then press the
Options soft key, and select Erase.
You are prompted to confirm the Group erasure.
3.
Highlight the desired entry, then press the Options soft
key, and select Erase. The phone prompts you to confirm
). “Group Saved” appears in the
new Group.
Find the Contacts entry you want to delete. (See “Finding a
Contacts Entry” on page 39 for more information.)
Enter a new group name using either keypad. (See
“Entering Text” on page 34 for more information.)
4.
Deleting a Contacts Entry
Note: Metro411 is only accessible using the QWERTY keypad.
2.
From the Contacts menu, select Metro411.
Press the Yes soft key to confirm erasure of the highlighted
A Metro411 Diretory Assistance screen appears in the
Group. Press the No soft key to retain the Group.
display.
Note: When you delete a Group, the assigned Contacts entries return to No
Group.
Note: For more information about Metro411 Directory Assistance service,
contact your Wireless Carrier.
Understanding Your Contacts
50
r560.book Page 51 Tuesday, June 16, 2009 1:04 PM
Memory Info
The Memory Info menu option lets you view the amount of
memory you have used to store Contacts entries, as well as the
memory remaining to store more Contacts entries.
䊳
From the Contacts menu, select Memory Info.
The Memory Info Contacts screen appears in the display
showing the amount of memory Used and remaining (Free)
for Contacts entries.
51
r560.book Page 52 Tuesday, June 16, 2009 1:04 PM
Section 7: @metro
With @metro, you can download full featured applications over
the air including games, personalized ring tones, pictures, and
more. You can send and receive instant messages and email, or
browse the web to catch up on all the latest news.
This section outlines how to obtain games and other applications
for your phone. For more information, contact your Wireless
Carrier.
The @metro screen appears in the display as shown.
Applications Shopping and Downloading
Download games, ring tones, e-mail, and more using the Mobile
Shop. For information on airtime charges, contact your Wireless
Carrier.
1.
Accessing @metro (Mobile Shop)
1.
Hold your phone sideways, with the Camera key (
facing up.
Note: The @metro screen only displays in landscape format, as shown.
2.
In standby mode, do
one of the following to
At the @metro screen, select brew. The brew menu
appears in the display.
)
2.
Select Browse catalog. Follow the instructions in your
phone’s display.
Note: Please check with your Wireless Carrier for availability of applications.
Tip: To simplify any text entries in @metro screens, open the QWERTY
keyboard.
launch @metro:
• Press the Right
navigation key or
.
• Press
, then select
@metro ➔ @metro.
@metro
52
r560.book Page 53 Tuesday, June 16, 2009 1:04 PM
Section 8: Messages
This section explains how to send or receive different types of
messages. This section also describes the features and
functionality associated with messaging.
Note: Although the procedures in this section are written for the phone
keypad, you can also perform these procedures using the QWERTY
keypad.
Tip: To launch the Create Txt Msg screen using a voice command — In
standby mode, press and hold
or
until the phone prompts,
“Say a command.” Say “Send Text” into the microphone. You are then
prompted to say a Contact name or a number for the first recipient of the
message.
2.
then press
Types of Messages
Your phone is able to send and receive Text, Picture, and Video
messages to compatible phones and devices. Text messages can
be up to 160 characters in length.
Enter the phone number or e-mail address of the recipient,
or
. The Text: appears in the display.
Tip: Press the Add soft key to display a pop-up menu containing: Contacts,
Groups, and Recent Calls. These options allow you to find and add
recipients to the To: list.
3.
Note: Available memory is shared between all messages. You can store up to
70 Text messages or 50 Picture/Video messages.
Enter the text content of your message using either
keypad. (See “Entering Text” on page 34 for more
information.)
Create and Send Text Messages
1.
In standby mode, press the Messages shortcut (Down
navigation) key or press the Menu soft key, then select
Messages ➔ Send Message ➔ Text Message. The
Create Txt Msg screen appears in the display showing the
To: list.
53
4.
At any point while composing a message:
• To change the text entry mode, press the Left soft key and select
the desired text entry mode, repeatedly press and hold
, or
press
. (For more information, refer to “Entering Text” on
page 34.)
• To complete the message text and set message send options,
press the Options soft key. The following options appear in the
display:
r560.book Page 54 Tuesday, June 16, 2009 1:04 PM
Edit Send To — Edit the recipient’s number or email address.
Add Quick Text — Insert pre-composed text in your message.
Save As Draft — Save the message to your Draft folder.
Priority Level — Choose High or Normal.
Validity Period — Enter the Date when this message will cease to be
valid, then use the Left and Right navigation keys to choose the Time.
– Delivery Ack — Choose On or Off — Requests confirmation when
your message is received.
– Add To Contacts — Save the recipient’s number or e-mail address as
a Contacts list entry.
Once you’re finished entering your message, press SEND
–
–
–
–
–
5.
(
or
).
Receive Text Messages
When you receive a message in standby mode, the ringer sounds
(unless turned off) and New Message appears in the display
along with the closed envelope icon ( ). The date and time of
the message also appear in the display along with the following
options:
• View Now — Opens the message, where you have the option to
Forward, Reply With Copy, Save Quick Text, Lock, Add To Contacts,
Message Info, or Extract.
• View Later — Saves the message to your inbox, where you can view
it later, then returns your phone to standby mode.
Receive Messages While in a Call
When you receive a message while in a call, New Message
appears in the display along with the closed envelope icon ( ).
The date and time of the message also appear in the display
along with the following options:
• View Now — Opens the message, where you have the option to
Forward, Reply With Copy, Save Quick Text, Lock, Add To Contacts,
Message Info, or Extract.
• View Later — Saves the message to your inbox, where you can view
it later, and returns your phone to call mode.
Select the option of your choice.
Send Picture Messages in Camera Mode
Picture messages can be sent to recipients with compatible
phones or devices. You can even accompany a Picture message
with a voice memo or preloaded sound.
Tip: You can send a Picture message to up to ten recipients. Enter each
recipient’s address or phone number in a separate Send to field of the
Picture message composer.
1.
In standby mode, press and hold the Camera key
(
). The camera viewfinder screen appears in the
display.
Select the option of your choice.
Messages
54
r560.book Page 55 Tuesday, June 16, 2009 1:04 PM
2.
Using the display as a viewfinder, when the image that you
7.
Your new picture appears in the PIC: field.
wish to send appears in the display, press the
8.
If you wish to insert a sound into your Picture message,
key (
or
soft
) to take a picture.
use the Down navigation key to highlight the Sound: field
Note: For more information about using the camera feature in your phone,
see “Camera-Camcorder” on page 75.
3.
Press the
soft key (
or
) to save the picture
and do the following; otherwise, proceed to step 10.
• Press the Sounds soft key. The My Sounds screen appears in the
display showing the following options:
– Record New — Record a new memo to insert into the message.
and begin delivery process. The Create Pic Msg screen
then appears in the display with the Send To: list
highlighted.
4.
Enter the phone number or e-mail address of the recipient
of the Picture message, then press
or
6.
Select an option to insert a sound into your message.
Press
or
to exit the pop-up menu without inserting a sound.
9. To complete the message text and set message send
The Subject: field appears in the display. Enter a subject
options, press the Options soft key. The following options
for the Picture message using the keypad. (See “Entering
appear in the display:
Text” on page 34 for more information.)
•
•
•
•
Press the Down navigation key until the Text: field is
highlighted, then enter the message text using the keypad.
(See “Entering Text” on page 34 for more information.)
55
– Audio files list — Select from the list of previously recorded voice
memos and preloaded audio files on your phone.
.
Tip: Press the Add soft key to display a pop-up menu containing: Contacts,
Groups, and Recent Calls. These options allow you to find and add
recipients to the Send To: list.
5.
Note: You can record and insert a voice memo of up to 60 seconds in length,
if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount
of remaining memory.
Preview — View the picture as the recipient will see it.
Add Quick Text — Add pre-composed text to your message.
Save As Draft — Save the message to your Draft folder.
Priority Level — Choose High, Normal, or Low.
r560.book Page 56 Tuesday, June 16, 2009 1:04 PM
• Validity Period — Enter the Date when this message will cease to
be valid, then use the Left and Right navigation keys to choose the
Time.
• Delivery Ack — Choose On or Off — Requests confirmation when
your message is received.
• Remove Pic — Remove the picture from your message.
• Remove Sound — Remove the sound file from your message.
• Add To Contacts — Save the recipient’s number or e-mail address
as a Contacts list entry.
Select the desired option.
10. Press
or
to send the message. “Pic Msg
Sending” appears in the display and a progress bar
1.
navigation) key or press the Menu soft key, then select
Messages ➔ Send Message ➔ Picture Message / Video
Message. The Create Pic Msg / Create Video Msg screen
appears in the display with the Send To tab highlighted
and showing the To: list.
Tip: To launch the Create Pic Msg screen using a voice command — In
standby mode, press and hold
or
until the phone prompts,
“Say a command.” Say “Send Picture” into the microphone. You are then
prompted to say a Contact name or a number for the first recipient of the
message.
2.
indicates the send status.
Tip: You can send a Picture/Video message to up to ten recipients. Enter
each recipient’s address or phone number in a separate Send To field of
the Picture message composer.
Enter the phone number or e-mail address of the recipient
using the keypad, then press
Send Picture/Video Messages in Standby Mode
Send Picture/Video messages to recipients with a compatible
phone or other device, and accompany a Picture message with a
voice memo, ringtone, or downloaded melody.
In standby mode, press the Messages shortcut (Down
or
.
Tip: Press the Add soft key to display a pop-up menu containing: Contacts,
Groups, and Recent Calls. These options allow you to find and add
recipients to the To: list.
3.
The Subject: field appears in the display. Enter a subject
for the Picture message using the keypad. (See “Entering
Text” on page 34 for more information.)
Messages
56
r560.book Page 57 Tuesday, June 16, 2009 1:04 PM
4.
Highlight the Text: field, then enter the message text using
either keypad. (See “Entering Text” on page 34 for more
Note: For more information about using the camera-camcorder feature in
your phone, see “Camera-Camcorder” on page 75.
information.)
5.
the Picture soft key. A photo gallery of thumbnail images
• Press or
to exit the photo gallery screen without selecting
a picture.
You are returned to the Create Pic Msg / Create Video
appears in the display.
Msg screen with the selected picture in the PIC: field.
For a Picture Message, highlight the PIC: field, then press
– or –
6.
For a Picture Message, if you wish to insert a sound into
your message, highlight the Sound: field, then press the
the Videos soft key. A video gallery of thumbnail images
Sounds soft key. The My Sounds screen appears in the
appears in the display.
display.
Do one of the following:
• Select a picture/video to add it to your message.
To expand the highlighted picture/video for easier viewing, press the
View / Play soft key.
• include a new picture/video by doing the following:
– Press the Camera / Video soft key. The Camera/Camcorder viewfinder
screen appears.
– Press the
soft key ( or
) to take the picture, or press the
)followed by the
soft key ( or
soft key ( or
) to take a video.
– Press SEND ( or
).
57
7.
For a Video Message, highlight the Video: field, then press
8.
Do one of the following:
• Select a file from the list of previously recorded voice memos and
preloaded audio files on your phone.
• Select Record New and record a new voice memo, then select the
new recorded sound file to add it to the message.
Note: You can record and insert a voice memo of up to 60 seconds in length,
if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount
of remaining memory.
• Press or
sound.
to exit the My Sounds screen without selecting a
r560.book Page 58 Tuesday, June 16, 2009 1:04 PM
9.
Press the Options soft key to complete the message text
and set message send options. The following options
appear in the display:
•
•
•
•
•
Preview — View the picture/video as the recipient will see it.
Add Quick Text — Add pre-computes text to your message.
Save As Draft — Save the message to your Drafts folder.
Priority Level — Choose High, Normal, or Low.
Validity Period — Enter the Date when this message will cease
to be valid, then use the Left and Right navigation keys to choose
the Time.
• Delivery Ack — Choose On or Off — Requests confirmation
when your message is received.
• Remove Pic — Remove the picture from your message.
• Remove Video — Remove the video from your message.
• Remove Sound — Remove the sound file from your message.
• Add To Contacts — Save the recipient’s number or e-mail
address as a Contacts list entry.
Select the desired option and setting.
10. Press SEND (
or
) to send the message. “Pic Msg
Receive Picture/Video Messages
When you receive a Picture/Video Message in standby mode, the
ringer sounds (unless turned off) and New Message appears in
the display along with the closed envelope icon ( ). The date
and time of the message also appear in the display along with
the following options:
• View Now — Retrieves and opens the message, where you have the
option to Reply, Forward, Delete, Save Text, Save Pic, Save Video, or
Save Msg.
• View Later — Saves the message to your inbox, where you can view
it later, then returns your phone to standby mode.
Select the desired option.
View a Picture/Video Message Later
1.
In standby mode, press the Messages shortcut (Down
navigation) key or press the Menu soft key, then select
Messages ➔ Inbox. The Inbox appears in the display.
2.
Select the new message. “Connecting” appears in the
display followed by “Retrieving” and a progress bar
indicating that the message is downloading to your phone.
Sending” appears in the display and a progress bar
indicates the send status.
Messages
58
r560.book Page 59 Tuesday, June 16, 2009 1:04 PM
3.
Once a Picture/Video message has been downloaded to
your phone, the new Picture/Video message appears in the
display. If the message includes a sound file, the phone
begins playing it.
Note: For more information on viewing and managing received picture
messages, see “Inbox” on page 60.
View a Picture Message Now
1.
After you select the View Now option, “Connecting”
appears in the display followed by “Retrieving” and a
progress bar indicating that the message is downloading
to your phone.
2.
After the Picture/Video message has downloaded, an alert
sounds, and the new Picture/Video message appears in
the display. If the message includes a sound file, the phone
begins playing it.
3.
While viewing your message press the Options soft key.
The following options appear in the display:
• Replay — Play the video or sound file included in the video/picture
message again.
• Forward — Send a copy of this message to another recipient.
59
• Reply With Copy — Compose and send a reply message to the
originator of the received message and include a copy of the
original message.
• Save Sound — Save the sound file included in this message to
the My Sounds folder.
• Save Pic — Save the picture included in this message to the My
Images folder.
• Save Video — Save the video included in this message to the My
Videos folder.
• Save Quick Text — Save the text in this message as a new Quick
Text.
• Lock / Unlock — Block/permit erasure of the highlighted
message.
• Add To Contacts — Save the sender’s number to your Contacts.
• Message Info — Shows message delivery status, addressee,
size, and so on.
4. Select an option to perform its function.
Note: For more information on received picture message options, see
“Inbox” on page 60.
Message Boxes
Your phone stores messages in any one of five message boxes.
The subsections that follow describe each message box in detail.
r560.book Page 60 Tuesday, June 16, 2009 1:04 PM
Inbox
Received messages of all types (except Voicemail) are stored in
the Inbox.
1.
In standby mode, press the Messages shortcut (Down
navigation) key or press the Menu soft key, then select
Messages ➔ Inbox. The Inbox appears in the display
showing a list of received messages.
Tip: While in a call, press the Options soft key, then select Messages.
2.
Highlight the message you wish to view, then press OPEN
(
3.
or
) to view contents of the highlighted message.
While viewing your message, press the Options soft key.
The following options appear in the display:
• Forward — Send a copy of this message to another recipient.
• Reply With Copy — Compose and send a reply message to the
originator of the received message and include a copy of the
original message.
• Save Sound — Picture Messages Only — Save the audio file
(sound) included in this message to the My Sounds folder.
• Save Pic — Picture Messages Only — Save the picture included
in this message to the My Images folder.
• Save Video — Video Messages Only — Save the picture included
in this message to the My Videos folder.
• Save Quick Text — Save the text in this message as a new Quick
Text.
• Lock / Unlock — Block/permit erasure of the highlighted
message.
• Add To Contacts — Save the sender’s number to your Contacts.
• Message Info — Shows message delivery status, addressee,
size, and so on.
• Extract — Calls the sender of the received message.
4. Select an option to perform its function.
Messages and Lock Mode
Your phone can still receive messages while in Lock Mode. The
time and date of the message appear in the display, but you
cannot access the message until you enter the lock code.
Managing Inbox Messages
1.
In standby mode, press the Messages shortcut (Down
navigation) key or press the Menu soft key, then select
Messages ➔ Inbox. The Inbox appears in the display
showing a list of received messages.
2.
Highlight a message in the list, you have the following
options:
Messages
60
r560.book Page 61 Tuesday, June 16, 2009 1:04 PM
• To remove the highlighted message from the Inbox, press the Erase
soft key.
• To review the highlighted message, press OPEN ( or
).
• For more options, press the Options soft key. The following options
appear in the display:
– Reply — Compose and send a reply message to the originator of the
received message.
– Reply With Copy — Compose and send a reply message to the
originator of the received message and include a copy of the original
message.
– Forward — Send a copy of this message to another recipient.
– Lock / Unlock — Block/permit erasure of the highlighted message.
– Add To Contacts — Save the sender’s number to your Contacts.
– Erase Inbox — Delete all unlocked messages from the Inbox.
– Message Info — Shows message delivery status, addressee, size,
and so on.
Select an option to perform its function.
Outbox
Your phone stores messages in the Outbox, regardless of
whether the message was successfully transmitted. Verify if and
when a message or e-mail was successfully received by enabling
the Enh. Delivery Ack/Delivery Ack feature.
61
Review Messages in the Outbox
1.
In standby mode, press the Messages shortcut (Down
navigation) key or press the Menu soft key, then select
Messages ➔ Outbox. Your list of sent messages appear
in the display.
2.
Highlight a message in the list, you have the following
options:
• To remove the highlighted message from the Inbox, press the Erase
soft key.
• To review the highlighted message, press OPEN ( or
).
• For more options, press the Options soft key. The following options
appear in the display:
– Play Again — Replay the sound file in a Picture message.
– Forward — Send the highlighted message to another recipient.
– Erase — Delete this message from the Outbox, if the message is
Unlocked.
– Lock / Unlock — Block/permit erasure of the highlighted message.
– Save Quick Text — Save the message text as Quick Text for insertion
into other messages.
– Add To Contacts — Save the recipient’s number to your Contacts.
– Message Info — Shows message delivery status, addressee, size,
and so on.
– Extract — Calls the originator of the message.
r560.book Page 62 Tuesday, June 16, 2009 1:04 PM
Select an option to perform its function.
Managing Outbox Messages
1.
In standby mode, press the Messages shortcut (Down
navigation) key press the Menu soft key, then select
Messages ➔ Outbox. Your list of sent messages appear
in the display.
2.
Draft Box
Messages in the Draft Box are those that have been composed
but never sent. You can return to the Draft Box at any time to
view, edit, or send a draft message.
Create a Draft Message
1.
In standby mode, press the Messages shortcut (Down
Highlight a message in the list, you have the following
navigation) key or press the Menu soft key, then select
options:
Messages ➔ Send Message and then select one of the
• To remove the highlighted message from the Inbox, press the Erase
soft key.
• To review the highlighted message, press OPEN ( or
).
• For more options, press the Options soft key. The following options
appear in the display:
– Forward — Send the highlighted message to another recipient.
– Resend — Send another copy of the highlighted message to the
original recipient
– Lock / Unlock — Block/permit erasure of the highlighted message.
– Add To Contacts — Save the recipient’s number to your Contacts.
– Erase Outbox — Erase all Unlocked messages from the Outbox.
– Message Info — Shows message delivery status, addressee, size,
and so on.
Select an option to perform its function.
following Send Message options:
• Text Message
• Picture Message
• Video Message
The Create Txt Msg / Create Pic Msg / Create Video Msg
screen appears in the display showing the To: list.
2.
Enter the phone Number or Email address of a recipient,
then press the
key.
Tip: Press the Add soft key to display a pop-up menu containing: Contacts,
Groups, and Recent Calls. These options allow you to find and add
recipients to the Send To: list.
Messages
62
r560.book Page 63 Tuesday, June 16, 2009 1:04 PM
3.
Compose your message using either keypad, press the
Highlight a text message that you wish to view or edit, then
• Add Quick Text — Insert pre-composed text into your message
text.
• Save As Draft — Save the message to your Drafts box.
• Priority Level — Choose High or Normal.
• Validity Period — Enter the Date when this message will cease
to be valid, then use the Left and Right navigation keys to choose
the Time.
• Delivery Ack — Choose On or Off — Requests confirmation
when your message is received.
• Add To Contacts — Save the recipient’s number or e-mail
address to your Contacts.
5. Select an option to perform its function.
press EDIT (
6.
Options soft key, then select Save As Draft. “Message
saved” appears in the display and your message is saved
to the Drafts box.
View and Edit Draft Text Messages
1.
In standby mode, press the Messages shortcut (Down
navigation) key or press the Menu soft key, then select
Messages ➔ Drafts. A list of any draft messages that
you’ve saved appears in the display.
2.
or
). The Create Txt Msg screen appears
in the display.
3.
Enter or change the recipient’s number and/or e-mail
address and the message text using the keypad. (See
4.
press SEND (
or
) to send it.
View and Edit Draft Pic. / Video Messages
1.
In standby mode, press the Messages shortcut (Down
“Entering Text” on page 34 for more information.)
navigation) key or press the Menu soft key, then select
To complete the message text and set message send
Messages ➔ Drafts. A list of any draft messages that
options, press the Options soft key. The following options
appear in the display:
• Edit Send To — Change, add, or remove recipients from this
message.
63
When you have completed composing your message,
you’ve saved appears in the display.
2.
Highlight the picture/video message that you wish to view,
then press EDIT key (
or
). The Create Pic Msg /
Create Video Msg screen appears in the display.
r560.book Page 64 Tuesday, June 16, 2009 1:04 PM
3.
Make any needed changes and press the Options soft key.
The following options appear in the display:
• Preview — Shows the message contents.
• Add Quick Text — Insert pre-composed text into your message
text.
• Save As Draft — Saves the changed message to the Draft Box.
• Priority Level — Choose High, Normal, or Low.
• Validity Period — Enter the Date when this message will cease
to be valid, then use the Left and Right navigation keys to choose
the Time.
• Delivery Ack — Choose On or Off — Requests confirmation
when your message is received.
• Remove Pic — Remove image included in draft message.
• Remove Video — Remove video included in draft message.
• Remove Sound — Remove sound file included in draft message.
• Add To Contacts — Save the recipient’s number or e-mail
address to your Contacts.
4. Select an option to perform its function.
5.
When you have completed composing your message,
press SEND (
or
) to send it.
Managing Draft Messages
1.
In standby mode, press the Messages shortcut (Down
navigation) key press the Menu soft key, then select
Messages ➔ Drafts. A list of any draft messages that
you’ve composed appears in the display.
2.
Highlight a message, then do one of the following:
• To remove the highlighted message from the Drafts box, press the
Erase soft key.
• To access other options, press the Options soft key. The following
options appear in the display:
– Send — Send the highlighted message to the number or e-mail
address currently included with the message.
– Lock / Unlock — Block/permit erasure of the highlighted message.
– Add To Contacts — Save the recipient’s number and/or e-mail
address to your Contacts.
– Save Quick Text — Save the message text as Quick Text for insertion
into other messages.
– Erase Drafts — Delete all unlocked draft messages.
Select an option to perform its function.
Voicemail
Messages in your voice mailbox are logged in the Voicemail box
of the Messages menu. Open the Voicemail box to view the
details of the Voicemail message.
Messages
64
r560.book Page 65 Tuesday, June 16, 2009 1:04 PM
When you’re notified of a new voicemail message by an alert
tone and the new message icon, the following options pop:
• Listen Now — Calls your voice mailbox and lets you listen to your
messages.
• Listen Later — Returns you to standby mode where you can choose
to call your mailbox and review your messages at a later time.
Listen to Voicemail Now
1.
In standby mode, select Listen Now in the New Voicemail
Tip: You can also access your voicemail from standby mode, by pressing and
holdling
or
to speed call your voice mailbox.
2.
Follow the voice prompts to access your voicemail
messages.
Erase Messages
You can erase all of the messages in any or all of message boxes
using one convenient sub-menu.
pop-up. Your phone automatically calls your voice mailbox.
2.
Follow the voice prompts to access your voicemail
messages.
Listen to Voicemail Later
If you have chosen to review your voicemail messages at a later
time:
1.
In standby mode, press the Messages shortcut (Down
navigation) key or press the Menu soft key, then select
Messages ➔ Voicemail. The Voicemail screen appears in
the display, showing the number of new voicemail
messages received and the date and time the latest
message was received.
65
Note: This function erases all messages in the selected message box. To
delete a single message, go to the respective message box, highlight
the message, and press the Erase soft key. (For more information, refer
to “Managing Inbox Messages” on page 60, “Managing Outbox
Messages” on page 62, or “Managing Draft Messages” on page 64.)
1.
In standby mode, press the Messages shortcut (Down
navigation) key or press the Menu soft key, then select
Messages ➔ Erase Messages. The following options
appear in the display:
•
•
•
•
Inbox — Deletes all unlocked messages stored in the Inbox.
Outbox — Deletes all unlocked messages stored in the Outbox.
Drafts — Deletes all unlocked messages stored in the Drafts box.
All Messages — Deletes all unlocked messages stored in all of
the message boxes, except Voicemail.
r560.book Page 66 Tuesday, June 16, 2009 1:04 PM
2.
Select the message box containing the messages you
want to delete. You’re prompted to confirm the erasure of
all messages in the selected box or in all boxes.
3.
To delete the messages, press the Yes soft key. To cancel
deleting the messages, press the No soft key.
Message Settings
Use the Msg Settings sub-menus to define settings for general,
text, and picture messages.
General Message Settings
1.
In standby mode, press the Messages shortcut (Down
• Callback # — Choose whether to include a callback phone
number with your outgoing messages, and enter the number to be
included.
• Signature — Choose whether to include a text signature in
outgoing message text, and enter the text to be included.
• Reminder — Select whether and how often you will hear and/or
feel a reminder that you have received a message (Once, Every 2
Minutes, Every 15 Minutes, Off).
2. Select the desired option, then select the desired setting or
enter the desired value.
Editing and Entering Quick Text
1.
In standby mode, press the Messages shortcut (Down
navigation) key or press the Menu soft key, then select
navigation) key or press the Menu soft key, then select
Messages ➔ Msg Settings ➔ General. The following
Messages ➔ Msg Settings ➔ General ➔ Quick Text.
options appear in the display.
• Auto Save — Choose whether your messages are saved
automatically when you exit them (On, Off, Prompt).
• Auto Erase — Choose to receive (On) or not receive (Off) a
warning message when you delete a message.
• Quick Text — Edit your pre-composed messages, which can then
be inserted into new messages.
• Voicemail # — Edit or view your Voicemail number.
• Entry Mode — Choose the default method for entering text into
messages (T9 Word, Abc, ABC, 123).
The Quick Text sub-menu appears in the display.
2.
Select a Quick Text you want to change.
Note: You cannot change the pre-defined Quick Text included with your
phone.
3.
To create a new Quick Text, press the New soft key.
Tip: You can also create new Quick Text by viewing/editing an Outbox
message and using the Save Quick Text option in the Options menu. See
“Review Messages in the Outbox” on page 61 for more information.
Messages
66
r560.book Page 67 Tuesday, June 16, 2009 1:04 PM
4.
Enter/change the text content of your Quick Text using
2.
either keypad. (See “Entering Text” on page 34 for more
information.)
5.
To save your finished Quick Text, press
. The
1.
In standby mode, press the Messages shortcut (Down
Quick Text menu appears in the display with your new
navigation) key or press the Menu soft key, then select
Quick Text highlighted.
Messages ➔ Msg Settings ➔ Picture Message. The
In standby mode, press the Messages shortcut (Down
navigation) key or press the Menu soft key, then select
Messages ➔ Msg Settings ➔ Text Message. The
following options appear in the display.
• Auto View — On/Off — With Auto View On, the full content of a
text message appears in the display as the messages is received.
• Signature — Create a signature, which can be included at the
bottom of outgoing message text.
• Auto Scroll — On/Off — With Auto Scroll On, the full content of a
text message automatically rolls upward on the display, one screenfull at a time.
• Message View — Chat/Normal — With Message View set to
Chat, multiple text messages exchanged with a single addressee
appear as a chat session.
67
enter the desired value.
Picture Message Settings
or
Text Message Settings
1.
Select the desired option, then select the desired setting or
following options appear in the display.
• Auto Receive — On/Off — With Auto Receive On, Picture
messages automatically download and display as they are
received. With Auto Receive Off, you are prompted to download
Picture messages.
• Signature — Create a signature, which can be included at the
bottom of outgoing Picture message text.
• Reply — Select type of message to be sent (TXT Message or
Picture Message) when you reply to Picture messages.
2. Select the desired option, then select the desired setting or
enter the desired value.
r560.book Page 68 Tuesday, June 16, 2009 1:04 PM
Section 9: MetroWEB
This section outlines how to launch MetroWEB, how to navigate
to other pages on the web, and how the keys on the QWERTY
keypad are used with the web application. Additionally, links to
other sites are briefly discussed.
Note: MetroWEB is usable in either portrait or landscape format (that is, with
the QWERTY keypad open or closed).
2.
MetroWEB
With MetroWEB, you can conveniently surf the web and
download ringtones and wallpapers using your phone. Each time
you launch MetroWEB, your phone connects to the Internet and
the service indicator icon (
) appears in the display.
Stored Web Content
MetroWEB ends an Internet connection after a certain period of
inactivity, however some information from your session remains
stored in the phone (if you leave your phone turned on). You can
access this information without reconnecting to the Internet.
However, if you are viewing stored information, and you select a
link to a site that was not accessed in your last session, you
automatically re-connect to the Internet.
Launching MetroWEB
1.
In standby mode, do one of the following to launch
MetroWEB:
• Highlight the MetroWEB shortcut icon, then press
.
– Or –
• Press the Menu soft key, then select MetroWEB ➔ MetroWEB.
3. A list of categories (each representing one or more web
sites) appears in the display.
4.
Use the arrow keys to browse the categories.
5.
Once the desired category is highlighted, press
to
enter the category list.
Exit MetroWEB
䊳
To exit MetroWEB, press
or close the QWERTY
keypad.
Open the QWERTY keypad.
MetroWEB
68
r560.book Page 69 Tuesday, June 16, 2009 1:04 PM
Using MetroWEB
When you use MetroWEB, some of the keys operate differently
than during a normal phone call. MetroWEB presents on-screen
items in any of the following ways:
• Text or numeric input.
• Links (embedded in content).
• Numbered options (some may not be numbered).
• Simple text.
You can act upon options or links by using the soft keys.
MetroWEB soft keys
At the bottom of the MetroWEB display is a bar that contains
browser commands. The Left and Right (
) soft keys on
the keypad are used to execute the commands that appear in
their respective corners of the display. These are called “soft
keys” because their functions change depending on the
application.
Using Links
Links have several purposes, such as jumping to a different
page, to a different site, or even initiating a phone call. Links are
shown inside of brackets ([ ]). You can normally use the Left soft
key (
) to select a link when it is highlighted.
69
How MetroWEB Keys Work
The following table lists MetroWEB keys and their functions.
Arrow keys — Use to browse lists and options.
Back Key — Press once to back up one page. Press
and hold to go back to home page.
Press once to clear the last number, letter, or symbol
entered. Press and hold to completely clear the entry.
SHIFT Key — Press before entering text to enable
uppercase characters.
Spacebar — Press to insert a space when entering
text.
Number 1 thru 0 — Use the number keys to select
items in a menu if they are numbered.
End Key — Press to exit the MetroWEB and return
the phone to standby mode.
Left Soft Key — Press to activate the command that
appears above it in the display.
Right Soft Key — Press to activate the command
that appears above it in the display.
r560.book Page 70 Tuesday, June 16, 2009 1:04 PM
Section 10: Voice SVC
This section explains how you can use and customize your
phone’s Voice SVC voice recognition feature.
Voice SVC Options
Your Samsung Messager II includes Nuance Vsuite, state-of-theart voice recognition software that lets you use your voice to dial
numbers, access your Contacts list, and open Tools. To access
your phone’s voice recognition, do the following:
1.
In standby mode, press
or
, then select Voice SVC.
The following options appear in the display:
• Voice Command — Lets you place calls, access your Contacts
List, review your appointments, and more by speaking commands
into your phone. Also see “Voice Dialing” on page 23 and
“Voice Method” on page 39 for more information.
• Voice Settings — Lets you tailor Vsuite to better respond to your
voice and your phone use preferences. See “Digit Dialing” on
page 72 for more information.
2. Select the desired sub-menu.
Voice Command
To access the Voice Command menu, do one of the following:
• In standby mode, press and hold
or
.
“Say a Command” appears in the display and plays through the
earpiece, followed by a list of available commands.
• In standby mode, press the Menu soft key, then select Voice SVC
➔ Voice Command.
Note: You can also set your phone to start VoiceSignal when you connect an
optional headset to the phone. (For more information, see “Voice
Launch” on page 74)
The following voice commands appear in the display:
• Call — Lets you dial the phone by saying any name stored in your
Contacts list, without ever having to record, or “train” that name.
VoiceSignal automatically voice-activates all your Contacts, even if you
have hundreds of them stored on your phone. You can also dial any
telephone number, even if it is not stored in your Contacts list, by
saying the digits in the number. (See “Voice Dialing” on page 23 for
more information.)
• Send Text — Lets you access Create Text Message.
• Send Picture — Lets you access Create Picture Message.
• Lookup — Lets you find a Contact by name and review the Contact’s
information.
Voice SVC
70
r560.book Page 71 Tuesday, June 16, 2009 1:04 PM
• Go to — Lets you access the following list of your phone’s features
and functions:
– Contacts
– Calls
– Messages
– MetroWEB
– @metro
– VoiceSVC
– Multimedia
– Tools
– Settings
• Check — Lets you say a single command (such as “Status”) to verify
your phone's: Status, Signal, Coverage, Battery, or My phone #.
Note: Speaking clearly, say the command that you want to use. If VoiceSignal
does not recognize a command, it prompts you to repeat the
command. If VoiceSignal still does not recognized the command, it
tells you “Sorry, no match found” and cancels voice recognition.
Voice Command Tips:
• Make sure you wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking on the phone.
Voice Settings
To access the Voice Settings menu:
䊳
In standby mode, press the Menu soft key, then select
Voice SVC ➔ Voice Settings.
Choice Lists
When Vsuite cannot recognize a name or number, it displays a
choice list of up to three possible choices, and prompts you to
confirm the correct one.
You can select how Vsuite will use choice lists with name dialing,
digit dialing, and Contacts.
To change the way Vsuite uses choice lists:
1.
From the Voice Settings menu, select Choice Lists. The
following options appear in the display:
• Automatic — Vsuite displays a choice list only when it is not sure
if it has correctly recognized the name or number.
• Always On — Vsuite always displays a choice list, even when
there is only one choice.
• Always Off — Vsuite never displays a choice list.
2. Select a new setting or press
or
to return to the
Voice Settings menu.
71
r560.book Page 72 Tuesday, June 16, 2009 1:04 PM
Sensitivity
Tips for Adapting Digit Dialing
1.
From the Voice Settings menu, select Sensitivity.
2.
Use the Up and Down navigation keys to adjust the
• Use Adapt Digits in a quiet place.
• Make sure you wait for the beep before starting to speak.
selected Sensitivity setting incrementally between Reject
More spoken commands or names and Reject Less
spoken commands or names.
3.
Press
or
to accept the new setting. Press
or
to discard the new setting and return to the Voice
Settings menu.
Digit Dialing
If you regularly have trouble with Vsuite not recognizing the
numbers you speak, try adapting digit dialing to your voice.
Adapting can improve the accuracy of digit recognition,
especially for people with strong regional accents.
Note: After you adapt Digit Dial, your phone is customized to your voice, and
your voice only. Others will not be able to use it unless they reset the
phone to factory defaults.
Adaptation involves recording several sequences of four digits
each. The recording process takes about a minute.
• Speak clearly, and say each digit distinctly.
• If you make a mistake while recording a sequence of digits, or if there
is an unexpected noise that spoils the recording, re-record that
sequence.
• Only adapt digits if you are regularly having problems with digit dialing.
Once you adapt, digit dialing will not work as well for other people
using your phone. (You can always reset digit adaptation to its original
state, as described below.)
Adapt Digits
To adapt digit dialing, do the following:
1.
From the Voice Settings menu, select Digit Dialing. The
following options appear in the display:
• Adapt Digits
• Reset Digits
2. Select Adapt Digits. Your phone displays text describing
the Adapt Digits process.
3.
Press
or
. Your phone displays the first digit
sequence and “Please say” plays through the speaker
followed by the four digits appearing in the display.
Voice SVC
72
r560.book Page 73 Tuesday, June 16, 2009 1:04 PM
4.
Wait for the beep and say the digits using your normal tone
of voice. After a moment, the phone plays back the
recording and prompts “Did the recording sound ok?”
• If the recording was good, say “Yes.”
• If you need to re-record, say “No.”
If you say “No,” the phone prompts you to pronounce the
digits again. Wait for the beep and then say the digits.
Repeat this step until you’re satisfied with the recording.
5.
After confirming that the recording sounds “ok”, continue
the recording process with the next set of digits.
6.
7.
Press the OK soft key to reset your digit adaptation, or
press the Back soft key to cancel.
Sound
Sound lets you specify what (if any) text prompts you want your
phone to read to you through the earpiece.
1.
From the Voice Settings menu, select Sound. The following
options appear in the display:
do more adaptation. Answer “Yes.”
•
•
•
•
Repeat steps 4 and 5 for another 10 sets of digits. After the
second group of 10 sets of digits, “Adaptation complete”
Digit Dialing menu.
Reset Digits
To reset digit dialing to factory default settings, do the following:
From the Voice Settings menu, select Digit Dialing. The
following options appear in the display:
73
digit rest.
3.
After 10 sets of digits, the phone asks whether you want to
plays through the speaker and you are returned to the
1.
• Adapt Digits
• Reset Digits
2. Select Reset Digits. The phone prompts you to confirm
Prompts — On/Off — Enables or disables audio prompts.
Digits — On/Off — Enables or disables digit playback.
Names — On/Off — Enables or disables name playback.
Name Settings — Lets you adjust the Speed (Faster or Slower)
and Volume (Louder or Softer) of your phone’s audio name
playback.
2. Select the desired option and the desired setting.
3.
Press
or
to accept the new setting. Press
or
to discard the new setting and return to the Sound
menu.
r560.book Page 74 Tuesday, June 16, 2009 1:04 PM
Voice Launch
To set the key or action that launches Nuance Vsuite, do the
following:
1.
From the Voice Settings menu, select Voice Launch. The
following options appear in the display:
• Key Only — Press and hold
or
to activate Vsuite for
one call.
• Key/EarMic — Attach a headset to your phone. Press and hold
or
, or press and hold the button on the headset to
activate VoiceSignal.
2. Press
or
to accept the new setting. Press
or
to discard the new setting and return to the Voice
Settings menu.
About
This option causes the About Nuance screen to appear in the
display, showing version and build information about the Vsuite
software included on your phone.
䊳
From the Voice Settings menu, select About.
The About Nuance screen appears in the display showing
the version level of the Vsuite software currently installed
on your phone.
Voice SVC
74
r560.book Page 75 Tuesday, June 16, 2009 1:04 PM
Section 11: Camera-Camcorder
Use your Samsung Messager II phone to take full color digital
pictures and videos, display them on your phone’s vivid color
display, and instantly share them with family and friends. It’s fun,
and as easy to use as a traditional point-and-click camera or
camcorder. This section explains how you can do the following:
• Take pictures and videos with your phone’s built-in digital cameracamcorder.
• Send and receive pictures and videos taken with your phone’s cameracamcorder.
• Set the several options associated with the camera-camcorder that
help you take crisp, clear pictures and videos.
1.
In standby mode, press and hold the Camera key (
)
on the right side of the phone. The camera view finder
screen appears in the display. (For more information, refer
to “Screen Layouts” on page 77.)
Taking Pictures and Videos
Taking pictures videos with the built-in camera-camcorder is as
simple as choosing a subject, pointing the lens (located on the
rear of your phone, at the top), and pressing a button.
Note: You can also activate the camera by pressing the Menu soft key, then
select Multimedia ➔ Camera.
2.
Note: The Camera-Camcorder screens only appear in landscape mode, with
the phone rotated.
Taking Snap Shots (Single Pictures)
To take a single picture using the current camera settings, do the
following:
75
Using the display as a viewfinder, point the camera at your
subject.
3.
When the image that you wish to capture appears in the
display, press the Camera key (
) or the
soft
key. The photo you’ve taken appears in the display.
r560.book Page 76 Tuesday, June 16, 2009 1:04 PM
• To erase the photo, press the
soft key.
• To send the photo as part of a Picture message, press the
soft key.
• To save the picture to memory, press the
soft key.
2.
icon. The
• Single Shot — Take one photo with each press of the Camera
button.
• Series Shot 4 / 6 — Lets you take a series of 4 or 6 photos.
• Mosaic Shot — Lets you take a mosaic of 1 to 18 photos.
When you select Series Shot 4 or Series Shot 6, the Series
Taking Multi Shot Pictures
progress bar (
When taking pictures of moving subjects or subjects you cannot
pose, such as children and pets, the camera’s Multi Shot mode
simplifies the process of taking multiple pictures in quick
succession. After taking Multi Shot pictures, the camera
automatically displays thumbnail views of the pictures you have
just taken so you can select the best picture(s) and discard the
rest.
In standby mode, press and hold the Camera key (
soft key, then highlight the
following options appear in the display:
Tip: You can change a number of the camera’s settings to suit particular
uses for your pictures. For more information, refer to “Camera Options”
on page 81.
1.
Press the
)
3.
to “Screen Layouts” on page 77.)
Note: You can also activate the camera by pressing the Menu soft key, then
select Multimedia ➔ Camera.
When you select Mosaic, the following options are
available:
• None
• 1/18 – 18/18
Select the desired number of shots.
4.
on the right side of the phone. The camera view finder
screen appears in the display. (For more information, refer
or
) appears in the display.
Using the display as a viewfinder, point the camera lens at
your subject.
5.
Press the
soft key or the Camera key (
). The
camera takes one picture (Single Shot) or multiple pictures
in quick succession (Series Shot 4 / 6 or Mosaic Shot).
6.
To save the picture(s) to memory, press the
soft key.
Camera-Camcorder
76
r560.book Page 77 Tuesday, June 16, 2009 1:04 PM
To discard the pictures, press the
soft key.
You are prompted to confirm the erasure.
To take a video using the current camcorder settings, do the
following:
In the Camera screen, press the
highlight the
Press the
soft key to save the video to memory.
5.
Press the
soft key to discard the video. You are
prompted to confirm the erasure.
Taking Videos
1.
4.
Screen Layouts
Camera Screen
soft key, then
icon and select Camcorder. The
camcorder view finder screen appears in the display. (For
more information, refer to “Camcorder Screen” on
page 79)
Note: You can also activate the camcorder from standby mode by pressing
the Menu soft key, then selecting Multimedia ➔ Camcorder.
2.
Using the display as a viewfinder, point the camera lens at
your subject.
3.
Press the Camera key when the image that you wish to
capture appears in the display. Recording continues until
one of the following occurs:
• You press Stop ( ).
• Available memory is used up (Normal setting).
• 15 seconds of video have been recorded (Video Msg setting).
77
When you activate your phone’s camera, the second line of the
display is reserved for the current camera resolution setting and
the picture counter. The center of the display shows a viewfinder
image of the subject at which the camera is pointed.
Camera Screen Soft Keys
Activates the Camera Options menu.
r560.book Page 78 Tuesday, June 16, 2009 1:04 PM
Takes a picture.
Opens the My Images folder.
Shooting Mode (Mosaic) — Takes up to 18 pictures
manually when you press the Camera key (
). The
number of pictures taken depends upon the Mosaic
setting.
Size — Indicates the current camera resolution setting.
(For more information, refer to “Size” on page 81.)
Discards the new photo.
Saves the new photo and includes it in a Picture
message.
Saves the new photo.
Quality — Indicates camera’s picture quality setting.
[You can change the picture quality setting. (For more
information, refer to “Quality” on page 82.)]
White Balance — Indicates the current photo White
Balance setting (Auto shown). Other options are:
Sunny
Cloudy
Camera Screen Icons
The following icons appear in the Camera screen when the Icon
Display Camera setting is set to On.
Tungsten
Fluorescent
Mode — Indicates whether in Camera mode (shown) or
Camcorder mode (
).
(For more information, refer to “White Balance” on
page 82.)
Shooting Mode (Series) — Takes multiple pictures (4 or
6) automatically or individually when you press the
Camera key (
). The number of pictures taken
depends upon the Series Shot option and the Series Shot
A/M setting.
ISO — Indicates camera exposure index setting (Auto,
100, 200, or 400).
Night Shot — Indicates whether your phone is ready to
).
take photos in low light: Off (shown) or On (
Camera-Camcorder
78
r560.book Page 79 Tuesday, June 16, 2009 1:04 PM
Photo Limit — Indicates the available number of photos
you can take. [Depending on the camera size and
quality settings. (For more information, refer to “Size”
on page 81 and “Quality” on page 82.)]
Brightness — Brightens or darkens the image from 4
to +4.
Self Timer in use — Delays the camera shutter for 2/
5/10 seconds (10 Sec. shown) after you press the
Camera key (
).
Phone Memory — Indicates photos will be stored in the
phone’s memory.
Card Memory — Indicates photos will be stored on a
microSD Memory Card.
Camcorder Screen
When you activate your phone’s camcorder, the first line of the
display is shows current camcorder setting icons. The center of
the display shows a viewfinder image of the subject at which the
camcorder is pointed.
Camcorder Screen Soft Keys
Activates the Camcorder Options menu.
Begins recording a video.
Ends a video recording.
Opens the My Videos folder.
Discards the new video.
Saves and includes the new video in a new Video
message.
Launches Video Player to view the new video.
79
r560.book Page 80 Tuesday, June 16, 2009 1:04 PM
Saves the new video.
Camcorder Screen Icons
The following icons appear in the Camcorder screen when the
Icon Display Camcorder setting is set to On.
Mode — Indicates whether in Camcorder mode (shown)
or Camera mode (
).
Recording Mode — Indicates camcorder’s recording
mode setting [Limit for MMS (shown) or Normal (
)].
(You can change the recording mode setting. For more
information, refer to “Recording Mode” on page 86.)
Quality — Indicates camcorder’s video quality. (Video
quality is set at Economy and cannot be changed.)
Sound Recording — Indicates camcorder’s sound
recording setting: On (shown) or Off (
).
White Balance — Indicates the current video White
Balance setting (Auto shown). Other options are:
Sunny
Cloudy
Tungsten
(For more information, refer to “White Balance” on
page 86.)
Self Timer in use — Delays the camcorder from
recording for for 2/5/10 seconds after you press the
Camera key (
).
Brightness — Brightens or darkens the image from 4
to +4.
Phone Memory — Indicates videos will be stored in the
phone’s memory.
Card Memory — Indicates videos will be stored on a
microSD Memory Card.
Memory Available — Indicates the percentage of
memory available for you to store a video.
Saving Pictures and Videos
After you’ve taken a picture or video, you can do any of the
following:
• Save the picture or video by pressing the
soft key.
On your phone, a picture is stored in the My Images folder. A video is
stored in the My Videos folder. These folders are part of the phone’s
memory and/or part of an optional Memory Card devoted to storing,
browsing, and viewing saved pictures and videos. (For more
information, refer to “The Photo Gallery” on page 90.)
Fluorescent
Camera-Camcorder
80
r560.book Page 81 Tuesday, June 16, 2009 1:04 PM
• Access the My Images / My Videos folder by pressing the
soft
key.
• Send the picture or video to someone else by pressing the
/
soft key.
For a detailed procedure, see “Send Picture Messages in Camera
Mode” on page 54.
• Discard the picture or video by pressing the
soft key.
• Single — 1 picture taken when your press the Camera key
(
).
• Series Shot 4 — 4 new pictures taken in succession.
• Series Shot 6 — 6 new pictures taken in succession.
• Mosaic — 1-18 new shots taken in succession and combined into
a single picture in an array.
2. Select the desired option and setting. The related icon
Camera Options
appears in the display.
The Camera Option buttons let you adjust the default camera
settings to suite available lighting, the subject of the photo, or the
purpose of the photo.
Note: When the Shooting Mode option is set to a value other than Single,
either a Series Shot progress bar (
) or a Mosaic
shot icon (
) appears in the viewfinder screen.
Mode
When you press the Camera key (
Switches the Camera to Camcorder mode.
䊳
In camera mode, press the
soft key, then highlight
and select Camcorder. The Camcorder view finder
1.
Shooting Mode
In camera mode, press the
/
81
In camera mode, press the
/
Shooting Mode lets you select Fun Frames and/or take multiple
pictures in succession when you press the Camera key (
).
available:
Size
Change the size (in bytes) of your pictures using the Size setting.
screen appears in the display.
1.
/
/
), the camera takes
several pictures in rapid succession (Multi and Mosaic).
soft key, then highlight
. The following options are
/
available:
• 1600x1200 pixels
• 1280x960 pixels
• 640 X 480 pixels
/
/
soft key, then highlight
. The following options are
r560.book Page 82 Tuesday, June 16, 2009 1:04 PM
• 320x240 pixels
• 176x144 pixels
2. Select the desired option. You’re returned to the camera
viewfinder screen.
Note: The Size setting affects zoom capabilities. When Size is set to
1600x1200 pixels, zoom is not available. When Size is set to any value
lower than 1600x1200 pixels, zoom settings 1 – 9 are available.
Quality
You can affect how much your picture is compressed, thereby
reducing it’s overall size, not to be confused with picture Size
(resolution).
1.
In camera mode, press the
/
/
soft key, then highlight
1.
/
the camera viewfinder screen.
White Balance
White Balance allows you to adjust video quality according to
available light.
/
/
/
soft key, then highlight
. The following options
appear in the display:
• Auto — The camera automatically adjusts color balance to
available light.
• Sunny — Use this setting when taking photos in full sun.
• Cloudy — Use this setting when taking photos in cloudy
conditions.
• Tungsten — Use this setting when taking photos under
incandescent lights.
• Fluorescent — Use this setting when taking photos under
fluorescent lights.
2. Select the White Balance you wish to use. The camera
viewfinder screen appears in the display with your
. The following options appear in the display:
• Fine
• Normal
• Economy
2. Select the quality setting of your choice. You’re returned to
In camera mode, press the
selected White Balance applied.
The next time you press the Camera key (
), the
camera applies the selected White Balance to your photo.
ISO
ISO lets you set your camera’s exposure index.
1.
In camera mode, press the
/
/
/
soft key, then highlight
. The options are:
• Auto
Camera-Camcorder
82
r560.book Page 83 Tuesday, June 16, 2009 1:04 PM
• 100
• 200
• 400
2. Select the ISO setting of your choice. You’re returned to the
• 5 Sec.
• 10 Sec.
2. Select the desired Self Timer option. If you select 2, 5, or
10, the Self Timer icon appears in the camera screen in the
camera viewfinder screen.
display.
Night Shot
When you press the Camera key (
1.
In camera mode, press the
/
• Off
• On
2. Select the Night Shot setting of your choice. You’re
returned to the camera viewfinder screen.
Self Timer
Self Timer lets you delay taking a picture long enough to let you
join others in a picture.
1.
In camera mode, press the
83
Tip: To stop or disable the Self Timer without resetting it, press
.
Color Effects
Change the look of your pictures with Color Effects. Choose from
six available settings such as Green, Negative, and Sepia. The
selected color effect previews in the display before you take the
picture.
1.
In camera mode, press the
soft key, then highlight
. The following options pop-up:
soft key, then highlight
. The following options are available:
• Off
• 2 Sec.
takes the picture.
soft key, then highlight
. The following options appear in the display:
), the countdown
timer indicates the time remaining before the camera
Night Shot lets you take pictures in low light conditions.
Note: To disable Color Effects, choose Normal.
• Normal — Subjects and pictures appear with a normal hue.
• Black&White — Subjects and pictures appear in black and white.
r560.book Page 84 Tuesday, June 16, 2009 1:04 PM
• Sepia — Subjects and pictures appear in a brownish-gray hue.
• Negative — Subjects and pictures appear in inverted colors.
• Green — Subjects and pictures appear in a greenish hue.
• Aqua — Subjects and pictures appear in an aqua hue.
2. Select the color effect of your choice. You’re returned to
the camera viewfinder screen.
When you take your next picture, the phone’s display
Auto Save
1.
(
• Off
• On
2. Select the automatic save setting of your choice. You’re
Memory
In camera mode, press the
(
returned to the camera viewfinder screen.
Series Shot A/M
When you change a setting, your change is retained until you
change that setting or reset all your camera settings.
1.
soft key, then highlight
) and select Auto Save. The following options appear
in the display:
previews your subject image with the selected color effect.
Camera Settings
In camera mode, press the
soft key, then highlight
) and select Memory. The following storage options
appear in the display:
• Phone Memory — Stores pictures in phone memory.
• Card Memory — Stores pictures on an optional microSD Memory
Card.
2. Select the memory location setting of your choice. You’re
returned to the camera viewfinder screen.
Series Shot A/M lets you select whether the Camera takes Series
Shot automatically, in quick succession, when you press the
Camera key (
).
1.
In camera mode, press the
(
soft key, then highlight
) and select Series Shot A/M.
• Auto — The Camera takes the selected number of Series Shots in
quick succession.
• Manual — The Camera takes one of the selected number of
Series Shots each time you press the Camera key (
).
2. Select the series shot setting of your choice. You’re
returned to the camera viewfinder screen.
Camera-Camcorder
84
r560.book Page 85 Tuesday, June 16, 2009 1:04 PM
Metering
1.
In camera mode, press the
(
soft key, then highlight
) and select Metering. The following options appear
in the display:
• Average — Adjusts exposure to the average light level over a large
picture area.
• Center — Adjusts exposure to the average light level over a center
portion of the subject.
• Spot — Adjusts exposure to the light level over a small portion of
the subject.
2. Select the Metering setting of your choice. You’re returned
to the camera viewfinder screen.
When you take your next picture, the phone’s display
previews your subject image with the measured exposure.
Icon Display
View Mode lets you quickly add or remove elements of the
Camera viewfinder screen.
1.
In camera mode, press the
(
soft key, then highlight
) and select Icon Display. The following options
appear in the display:
• Display All — All Camera display icons appear in the Camera view
finder screen.
85
• Guideline — Removes the Camera display icons (if displayed) and
displays a crosshatch pattern in the Camera view finder screen.
Camera display icons appear when you press the
soft key.
• No Icons — Removes the Camera display icons (if displayed) from
the Camera view finder screen. Camera display icons appear when
you press the
soft key.
Shutter Sound
Choose from four different sounds whenever you take a picture.
Aside from being a cool sound effect, Shutter Sounds act as an
audible reminder that your camera has taken a picture.
1.
In camera mode, press the
(
soft key, then highlight
) and select Shutter Sound. The following shutter
sounds appear in the display:
• Off
• Shutter
• OK
• DingDong
2. Select the shutter sound setting of your choice. You’re
returned to the camera viewfinder screen.
Reset Settings
This option lets you reset the Camera’s settings to their factory
default values.
r560.book Page 86 Tuesday, June 16, 2009 1:04 PM
䊳
In camera mode, press the
(
soft key, then highlight
confirm the reset.
Camcorder Options
Mode
Switches the Camcorder to Camera mode.
/
soft key, then highlight
and select Camera. The Camera view finder
screen appears in the display.
In camcorder mode, press the
/
soft key, then highlight
. The following options appear in the display:
• On
• Off
White Balance
White Balance allows you to adjust video quality according to
available light.
1.
In camcorder mode, press the
/
/
/
soft key, then highlight
. The following options
appear in the display:
In camcorder mode, press the
/
Shutter Sounds lets you enable or disable the shutter sounds the
Camcorder plays when you begin and end recording a video.
/
Recording Mode
1.
returned to the camcorder viewfinder screen.
1.
The Camcorder Options let you adjust the default camcorder
settings to suite available lighting, the subject of the video, or the
purpose of the video.
In camcorder mode, press the
Select the desired recording mode setting. You are
Shutter Sounds
• To reset the Camera settings, select Yes.
• To keep the current Camera settings, select No.
䊳
2.
) and select Reset Settings. You are prompted to
soft key, then highlight
. The following options appear in the display:
• Limit for MMS — Record videos that are a maximum of 15
seconds long. The videos can be included in video messages.
• Normal — Record videos that are any length up, depending on
available memory.
• Auto — The Camcorder automatically adjusts color balance to
available light.
• Sunny — Use this setting when recording videos in full sun.
• Cloudy — Use this setting when recording videos in cloudy
conditions.
• Tungsten — Use this setting when recording videos under
incandescent lights.
Camera-Camcorder
86
r560.book Page 87 Tuesday, June 16, 2009 1:04 PM
• Fluorescent — Use this setting when recording videos under
fluorescent lights.
2. Select the White Balance you wish to use. The camera
2.
the camcorder viewfinder screen.
viewfinder screen appears in the display with your
When you record your next video, the phone’s display
selected White Balance applied.
previews your subject image with the selected color effect.
The next time you press the Camera key (
), the
camera applies the selected White Balance to your photo.
Change the look of your videos with Color Effects. Choose from
six available settings such as Green, Negative, and Sepia. The
selected color effect previews in the display before you take the
picture.
In camcorder mode, press the
soft key, then highlight
. The following options appear in the display:
Note: To disable Color Effects, choose Normal.
•
•
•
•
•
87
Self Timer
Self Timer lets you delay recording a video long enough to let you
join others in the video.
Color Effects
1.
• Aqua — Subjects and videos appear in an aqua hue.
Select the color effect of your choice. You’re returned to
Normal — Subjects and videos appear with a normal hue.
Black&White — Subjects and videos appear in black and white.
Sepia — Subjects and videos appear in a brownish-gray hue.
Negative — Subjects and videos appear in inverted colors.
Green — Subjects and videos appear in a greenish hue.
1.
In camcorder mode, press the
soft key, then highlight
. The following options are available:
• Off
• 2 Sec.
• 5 Sec.
• 10 Sec.
2. Select the desired Self Timer option. If you select 2, 5, or
10, the Self Timer icon appears in the camcorder screen in
the display.
When you press the Camera key (
), the countdown
timer indicates the time remaining before the camcorder
records the video.
r560.book Page 88 Tuesday, June 16, 2009 1:04 PM
Tip: To stop or disable the Self Timer without resetting it, press
.
View Mode lets you quickly add or remove elements of the
Camera viewfinder screen.
Camcorder Settings
Memory
1.
1.
In camcorder mode, press the
(
Icon Display
appear in the display:
• Display All — All Camcorder display icons appear in the
Camcorder view finder screen.
• No Icons — Removes the Camcorder display icons (if displayed)
from the Camcorder view finder screen. Camcorder display icons
appear when you press the
soft key.
2. Select the desired Icon Display setting. You’re returned to
returned to the Camcorder viewfinder screen.
Auto Save
1.
the camcorder viewfinder screen.
Start Sound
In camcorder mode, press the
(
soft key, then highlight
) and select Icon Display. The following options
appear in the display:
) and select Memory. The following storage options
• Phone Memory — Stores videos in phone memory.
• Card Memory — Stores videos on an optional microSD Memory
Card.
2. Select the memory location setting of your choice. You’re
In camcorder mode, press the
(
soft key, then highlight
soft key, then highlight
) and select Auto Save. The following options appear
in the display:
• Off
• On
2. Select the automatic save setting of your choice. You’re
returned to the camcorder viewfinder screen.
Choose from two different sounds whenever you begin video
recording. Aside from being a cool sound effect, Start Sound acts
as an audible reminder that your camcorder has begun recording
a video.
1.
In camcorder mode, press the
(
soft key, then highlight
) and select Start Sound. The following Start Sound
options appear in the display:
• Off
Camera-Camcorder
88
r560.book Page 89 Tuesday, June 16, 2009 1:04 PM
• Look here
• 1,2,3!
2. Select the desired start sound. You’re returned to the
(
• To reset the Camcorder settings, select Yes.
• To keep the current Camcorder settings, select No.
camcorder viewfinder screen.
Camera-Camcorder Adjustments
End Sound
Choose from two different sounds whenever you stop video
recording. Aside from being a cool sound effect, End Sound acts
as an audible reminder that your camcorder has stopped
recording a video.
1.
In camcorder mode, press the
(
) and select Reset Settings. You are prompted to
confirm the reset.
Zoom
Zoom lets you temporarily enlarge the pictures you take or videos
you record. Increasing the Zoom (2 – 9) enlarges your pictures or
videos (1 is normal).
soft key, then highlight
) and select End Sound. The following End Sound
Note: Zoom is not available to the Camera if the Size Camera option is set to
1600x1200.
options appear in the display:
• Off
• OK
• Melody
2. Select the desired end sound. You’re returned to the
䊳
In camera or camcorder viewfinder screen, press the
Navigation key Left and Right to adjust the Zoom. The
Zoom adjustment appears in the display, and the screen
image enlarges to show the affects of your changes.
camcorder viewfinder screen.
The next time you press the Camera key (
Reset Settings
This option lets you reset the Camcorder’s settings to their
factory default values.
䊳
89
In camcorder mode, press the
soft key, then highlight
), the
Camera takes an enlarged picture or the Camcorder
records an enlarged video, according to your selected
Zoom setting.
r560.book Page 90 Tuesday, June 16, 2009 1:04 PM
Brightness
1.
Brightness lets you temporarily lighten the pictures you take or
videos you record. Increasing the Brightness (-4 – +4) lightens
your pictures or videos (0 is normal).
1.
thumbnail images in the display.
2.
In camera mode, press the Navigation key Up or Down.
To brighten your next picture(s), press the Navigation key
soft key.
Any pictures that you’ve saved are listed with their
To launch the Camera and take new pictures, press the
Camera soft key.
The Brightness adjustment appears in the display.
2.
In the Camera viewfinder screen, press the
3.
To view a picture, press the VIEW soft key.
4.
For more options, press the Options soft key. The following
Up. To darken your next picture(s), press the Navigation
additional options pop-up:
key Down. (The screen image lightens or darkens to show
• Send — Send the currently highlighted or displayed image as part
of a Picture message.
• Set As — Assign the currently highlighted or displayed image as
the Main Wallpaper or as the Picture ID for a Contact.
• Rename — Change the name of the picture file.
• Move — Relocate the currently highlighted or displayed image
from phone memory to a Memory Card or from a Memory Card to
phone memory.
• Copy — Copy the currently highlighted or displayed image from
phone memory to a Memory Card or from a Memory Card to phone
memory.
• Lock/Unlock — Prevent/allow erasure of the currently highlighted
or displayed image.
• Erase Files — Delete one or more marked images from the My
Images folder.
the affects of your changes).
The next time you press the Camera key (
), the
camera takes a lighter or darker picture or records a lighter
or darker video according to your selected Brightness
setting.
The Photo Gallery
Saved pictures are stored in the My Images folder. You can
browse the pictures one at a time (expanded mode), or view
several pictures at once in thumbnail format.
Camera-Camcorder
90
r560.book Page 91 Tuesday, June 16, 2009 1:04 PM
• Picture Info — View the Name, Date and Time created,
Resolution, and Size of the currently highlighted or displayed image.
5. Select the desired option to perform its function or to enter
3.
To launch the Video Player and view a video, highlight the
video and press the PLAY soft key.
its sub-menu.
The Video Gallery
Saved videos are stored in the My Videos folder. You can browse
the videos one at a time (expanded mode), or view several videos
at once in thumbnail format.
1.
In the Camcorder viewfinder screen, press the
soft
key. Any videos that you’ve saved are listed with their
thumbnail images in the display.
2.
To launch the Camcorder and record a video, press the
Video soft key.
91
Tip: To view a video in landscape mode, open the QWERTY keypad.
r560.book Page 92 Tuesday, June 16, 2009 1:04 PM
Note: To enlarge the video playback, press the Full Screen soft key.
• Move — Relocate the highlighted video from phone memory to a
Memory Card or from a Memory Card to phone memory.
• Copy — Copy one or more videos from phone memory to a
Memory Card or from a Memory Card to phone memory.
• Lock / Unlock — Prevent/allow erasure of one or more images.
• Erase Files — Delete one or more marked unlocked videos from
the My Videos folder.
• Video Info — View the Name, Date and Time created, Resolution,
Size, and Duration of the currently highlighted video.
5. Select the desired option to perform its function or to enter
The following controls are available
• To pause/resume playing a video, press .
• To stop playing a video, press the Down navigation key.
• To skip play to an earlier video in the My Videos folder, press the
Left navigation key.
• To skip play to a later video in the My Videos folder, press the Right
navigation key.
• To return to the My Videos folder and choose another video file to
play, press the Up navigation key.
4. To access video options, press the Options soft key. The
its sub-menu.
Point, Click, and Send Pictures and Videos
Take a picture or record a video and send it to anyone with a
compatible device in a few easy steps.
Note: To record and send a video while in Camcorder mode, set Shooting
Mode to Limit for MMS (
).
1.
)
on the right side of the phone. The camera view finder
screen appears in the display.
following options pop-up:
• Send — Lets you send the highlighted video as part of a video
message.
• Rename — Rename the highlighted video.
In standby mode, press and hold the Camera key (
2.
To record a video, press the
soft key. The camcorder
view finder screen appears in the display.
Camera-Camcorder
92
r560.book Page 93 Tuesday, June 16, 2009 1:04 PM
3.
Using the display as a viewfinder, take the desired picture
or begin record the desired video by pressing the Camera
key (
(
). To stop video recording, press the Camera key
) again.
The photo/video review screen appears in the display.
4.
Press the
5.
Enter the recipient’s phone number or e-mail address
/
soft key.
using the keypad.
6.
Press the OK soft key to save the address(es).
7.
Select other message fields as needed. (For more
information, refer to “Send Picture Messages in Camera
Mode” on page 54, and see “Send Picture/Video
Messages in Standby Mode” on page 56.)
8.
When you are finished composing your message, press
SEND soft key to send the Picture or Video message to the
intended recipient(s).
93
r560.book Page 94 Tuesday, June 16, 2009 1:04 PM
Section 12: Multimedia
Use your Samsung Messager II phone to take full color digital
pictures, display them on your phone’s vivid color display, and
instantly share them with family and friends.
With Mobile Shop, you can download personalized ringtones,
pictures, and more. For more information, contact your
Wireless Carrier.
Note: Although the procedures in this section are written for the phone
keypad, you can also perform these procedures using the QWERTY
keypad.
Accessing Multimedia
1.
In standby mode, press the Menu soft key, then select
Multimedia. The following Multimedia sub-menus appear
in the display:
• Camera — Lets you launch and set up your phone’s camera. (For
more information, refer to “Camera-Camcorder” on page 75.)
• Camcorder — Lets you launch and set up your phone’s
camcorder. (For more information, refer to “CameraCamcorder” on page 75.)
• Music Player — Lets you launch and set up your phone’s music
player and manage music files stored on an optional microSD
memory card. (For more information, refer to “Using Your Music
Player” on page 95.)
• My Images — Lets you choose the multi-media or pictures that
appear in your phone’s display.
• My Videos — Lets you choose and play the videos that appear in
your phone’s display. (For more information, refer to “The Video
Gallery” on page 91.)
• My Ringtones — Lets you assign melody tones for calls, alarms,
and other alerts.
• My Sounds — Lets you assign melody tones for calls, alarms, and
other alerts.
2. Select a sub-menu to launch it. The following sections
describe the above listed sub-menus in greater detail.
Using My Images Gallery
My Images lets you manage your photos and pictures you
download, and lets you choose the pictures that appear in your
phone’s display while in standby mode (wallpaper), and as image
IDs for your contacts.
Multimedia
94
r560.book Page 95 Tuesday, June 16, 2009 1:04 PM
1.
– Erase Files — Delete one or more marked images from the My
Images folder.
– Picture Info — View the Name, Date and Time created, Resolution,
and Size of the currently highlighted or displayed image.
In standby mode, press the Menu soft key, then select
Multimedia ➔ My Images. A multiple-page matrix of
thumbnail views of saved photos and images appears in
the display.
2.
Highlight an image or photo. You have the following
3.
return to standby mode, press
options:
• To take new photos, press the Camera soft key.
• To expand the highlighted image to fill the screen, press VIEW (
or
).
• To access other options, press the Options soft key. The following
options appear in the display:
– Send — Send image as part of a Picture message. (See “Send
Picture/Video Messages in Standby Mode” on page 56 for
more information.)
– Set As — Assign the currently highlighted or displayed image as the
Main Wallpaper or as the Picture ID for a Contact.
– Rename — Change the name of the picture file.
– Move — Relocate the currently highlighted or displayed image from
phone memory to a Memory Card or from a Memory Card to phone
memory.
– Copy — Copy the currently highlighted or displayed image from phone
memory to a Memory Card or from a Memory Card to phone memory.
– Lock/Unlock — Prevent/allow erasure of the currently highlighted or
displayed image.
95
Select the desired option and a desired value.
To return to the previous menu, press
or
. To
.
Using Your Music Player
Music Player lets you play MP3 and unprotected AAC, AAC+,
WMA music files, loaded onto an optional microSD™ Memory
Card using a personal computer. (For information on loading
music files on a Memory Card, see “Loading Music Files” on
page 97.)
Launching the Music Library Menu
1.
In standby mode, press the Menu soft key, then select
Multimedia ➔ Music Player.
– Or –
On the Music Player screen, press the Library soft key.
2.
The Library menu appears in the display showing the
following options:
r560.book Page 96 Tuesday, June 16, 2009 1:04 PM
• Now Playing — Music Player mode only — Indicates number of
music files currently playing. Select this option (or press the Back
soft key) to return to the Music Player screen.
• All — Lists all music files on the Memory Card and lets you play
individual music files or play multiple music files by creating a
temporary music playlist.
• Artists — Lists artist names for music files on the Memory Card
and lets you play one or more music files by a selected artist.
• Albums — Lists album titles for music files on the Memory Card
and lets you play one or more music files from a selected album.
• Genres — Lists music categories for music files on the Memory
Card and lets you play one or more music files of a particular music
category.
• Playlists — Lists any playlists you have saved and lets you create,
save, and manage playlists.
3. Use the Navigation key or Arrow keys to highlight a music
file, then:
• To play the file, press the Play soft key.
• To select the file for playing or other options, press MARK ( ).
• To select and apply any of the following options to the highlighted or
marked music file(s), press the Options soft key:
– Mark All — Marks all listed music files for playing, removal, or
assignment of player settings.
– Erase — Deletes highlighted or marked music file(s) from the Memory
Card.
– Add to Playlist — Lets you add a marked music file to an existing
playlist.
– Song Info — Lists the title, artist, album, genres, copyright
information, time length, file size, and bit rate of the highlighted music
file.
Select the desired option.
Playing Music
1.
At the Multimedia menu, select Music Player. The Library
screen appears in the display, showing the following
options:
• All
• Artists
• Albums
• Genres
• Playlists
2. Highlight the desired option,
press VIEW (
), and then do
one of the following:
• All option — Highlight a music
file, then press the Play soft key
to play the file.
Multimedia
96
r560.book Page 97 Tuesday, June 16, 2009 1:04 PM
Tip: To play additional files, use the Left and Right navigation keys, or
highlight and mark additional files for playback. (For more information,
see “Launching the Music Library Menu” on page 95.)
• Other options — Use the Navigation key to highlight an Artist,
Album, Genre, or Playlist, then press VIEW ( ).
Use the Navigation key to highlight a music file, then press the Play soft
key to play the file.
The Music Player screen appears in the display and the
selected music file/playlist begins playing.
Music Player Controls
• Volume key:
– To play a music file louder, press the
Volume key Up.
– To play a music file softer, press the
Volume key Down.
• Navigation key:
– To pause/resume playing a music file,
press .
– To stop playing a music file, press the
Down navigation key.
– To skip play to an earlier music file in the selected list, press the Left
navigation key.
– To skip play to a later music file in the selected list, press the Right
navigation key.
97
– To return to the selected list and choose another music file to play,
press the Up navigation key.
• Library soft key — Returns you to the Library screen.
• Options soft key — Shows the following sub-menus and options:
– Play Mode — Lets you change the play mode from Normal, Shuffle,
Repeat One, or Repeat All.
– Add to Playlist — Moves you to the Playlists menu to let you add the
selected music file to a playlist.
– Remove — Deletes the selected music file from the Memory Card
– Visual Supplements — Lets you change the Music Player visualization
to Simple View, Equalizer, Album Art, or Lyrics.
– Memory Info — Displays the Memory Usage screen which lists
Memory Card usage and availability amounts.
– Song Info — Lists the title, artist, album, genre, copyright information,
time length, file size, and bit rate of the highlighted music file.
Select the desired option to launch the option or to access the submenu.
Loading Music Files
To transfer music to a microSD™ Memory Card, do the
following:
1.
Before loading music files on a Memory Card, do the
following:
r560.book Page 98 Tuesday, June 16, 2009 1:04 PM
• With your phone powered off, insert the Memory Card into your
phone. (For more information, see “Install a Memory Card” on
page 7.)
• Power your phone on.
• When the Memory Card icon (
) appears in the display, remove
the Memory Card from your phone. (For more information, see
“Remove a Memory Card” on page 8.)
2. Insert the Memory Card into a compatible card reader.
Note: Card readers vary. Follow the installation instructions included with
your card reader and personal computer.
3.
Open the Memory Card reader drive and the “My_Music”
folder.
4.
Drag or download music (MP3) files into the “My_Music”
Using My Ringtones Gallery
My Ringtones lets you assign ringtones for calls, alarms, and
other alerts.
1.
in the display.
2.
Remove the Memory Card by following the removal
instructions for the Memory Card reader and for your
personal computer.
6.
Insert the Memory Card into your phone. (For more
information, see “Install a Memory Card” on page 7.)
Highlight a ringtone. You have the following options:
• To assign the highlighted ringtone to be used as a Ringtone, a
Contact ID, or an Alert Tone, press the Set As soft key.
• To hear the ringtone, press PLAY ( or
).
• To show title and file type for the highlighted ringtone, press the Info
soft key.
3. To return to the previous menu, press
or
. To
folder.
5.
In standby mode, press the Menu soft key, then select
Multimedia ➔ My Ringtones. A list of ringtones appears
return to standby mode, press
.
Using My Sounds Gallery
My Sounds lets you record and manage voice memo files and
assign melodies as ringers or alerts.
1.
In standby mode, press the Menu soft key, then select
Multimedia ➔ My Sounds.
The following options appear in the display:
• Record New — Lets you record voice memos.
Multimedia
98
r560.book Page 99 Tuesday, June 16, 2009 1:04 PM
2.
– Lock / Unlock — Block/permit erasure of the highlighted image.
– Erase all — Erase all unlocked voice memos.
– Sound Info — Shows the title, size, type, and date for the file.
• A list of recorded voice memo files and melodies.
When you select Record
New, the Record New screen
appears in the display.
• To start recording a voice memo,
press REC ( or
).
• To pause/resume recording,
press the Pause soft key.
• To stop recording and save the
voice memo, press SAVE ( or
).
3. When you highlight a saved
voice memo file, you have the following options:
• To erase the selected voice memo file, if it is unlocked, press the
Erase soft key.
• To listen to the voice memo, press PLAY ( or
).
• Press the Options soft key, and the following options appear in the
display:
– Send — Send to someone as part of a Picture message. (See “Send
Picture/Video Messages in Standby Mode” on page 56 for
more information.)
– Set As — assign the highlighted ringtone to be used as a Ringtone,
Contact ID, or as the Alert Tone.
– Rename — Change the name of the voice memo file.
99
4.
When you highlight a melody file, you have the following
options:
• To hear the ringtone, press PLAY ( or
).
• Press the Options soft key to show the following options:
– Send — Send to someone as part of a Picture message. (See “Send
Picture/Video Messages in Standby Mode” on page 56 for
more information.)
– Set As — assign the highlighted ringtone to be used as a Ringtone,
Contact ID, or as the Alert Tone.
– Erase all — Erase all unlocked melodies.
– Sound Info — Shows the title, size, type, and date for the file.
5. To return to the previous menu, press
or
. To
return to standby mode, press
.
r560.book Page 100 Tuesday, June 16, 2009 1:04 PM
Section 13: Tools
This section explains how you can use your phone’s Personal
Information Manager (PIM) functions to view today’s calendar,
schedule appointments, set an alarm, perform simple math
calculations, and more.
Accessing Your Phone’s Tools
To launch the Tools menu:
䊳
In standby mode, press the Menu soft key, then select
Tools. The Tools menu appears in the display.
Bluetooth
Turn Bluetooth On/Off
When the Bluetooth is turned on, you can use the Bluetooth
features available. When the Bluetooth is turned off, you cannot
send or receive information via Bluetooth. To save battery life or
in situations where Bluetooth use is prohibited, such as airline
traveling, you can turn off the Bluetooth wireless technology
headset.
To turn Bluetooth support on:
䊳
Settings ➔ Enable.
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30
feet without requiring a physical connection.
Unlike infrared, you don't need to line up the devices to beam
information with Bluetooth. If the devices are within a range of
one another, you can exchange information between them, even
if they are located in different rooms.
The Bluetooth wireless technology settings menu provides the
ability to view and change the device name, show the visibility,
and set the security for the device.
From the Tools menu, select Bluetooth ➔ Bluetooth
“Bluetooth set to on” and the red Bluetooth On icon (
)
appear in the display.
To turn Bluetooth support off:
䊳
From the Tools menu, select Bluetooth ➔ Bluetooth
Settings ➔ Disable.
“Bluetooth set to off” appears in the display and the and
the Bluetooth On icon (
) disappears.
Tools
100
r560.book Page 101 Tuesday, June 16, 2009 1:04 PM
Add New Device
5.
1.
From the Tools menu, select Bluetooth. The following
6.
options appear in the display:
• Registered List
• Bluetooth Settings
2. Select Registered List.
If there are no Bluetooth devices registered, the Add New
Use the navigation keys to highlight the device you want to
pair with your phone.
7.
Press PAIR (
or
) to pair the selected device with the
phone. You are prompted to enter the passkey or PIN for
the selected device.
8.
Enter the device passkey or PIN and press
or
. Pop-
If Bluetooth is off, you are prompted to “Turn bluetooth
device is complete and prompting you to connect with the
on?”. Press the Yes soft key to turn Bluetooth on.
device.
Select Add New Device.
mode” appears in the display.
Place the Bluetooth device in discoverable mode. (See the
device user manual for more information.)
101
). Names of the available devices
up messages appear to inform you that pairing with the
“Place device you are connecting to in discoverable
4.
or
Device screen appears in the display. (See Step 3.)
Note: To leave Bluetooth off and return to the Bluetooth sub menu, press the
No soft key.
3.
Press OK (
appears in the display.
To search for available Bluetooth devices:
9.
To connect with the device, press the Yes soft key. To
return to the Bluetooth menu without connecting to the
device, press the No soft key.
r560.book Page 102 Tuesday, June 16, 2009 1:04 PM
Registered List
This menu provides a list of
Bluetooth wireless technology
devices discovered by your handset.
䊳
From the Tools menu, select
Bluetooth ➔ Registered List.
A list of registered Bluetooth
devices appears in the display.
Connecting to a Bluetooth Device
1.
From the Registered List, highlight the device and press
or
2.
.
If you are unable to connect with the device a pop-up
appears in the display. Press the Yes soft key to retry.
Disconnecting from a Bluetooth Device
䊳
From the Registered List, highlight the device and press
the Off soft key.
Managing Your Registered List
1.
From the Registered List, highlight a device and press the
Options soft key. The following options appear in the
display:
• Remove Device — Deletes the device from the Registered List.
• Rename Device — Lets you change or replace the device name,
as needed.
• Service Discovery — Lists the Bluetooth profiles that apply to this
device.
• Device Info — Shows the type of device, status, address, the date
when it was paired with your phone, and the date the device was
last connected with your phone.
• Send Name Card — Lets you send selected Contact(s) information
to another Bluetooth device.
2. Select the desired option to access it.
Bluetooth Settings
To access Bluetooth settings:
䊳
From the Tools menu, select Bluetooth ➔ Bluetooth
Settings.
The following options appear in the display:
Enable/Disable
Selecting this option turns Bluetooth on or off. (For more
information, see “Turn Bluetooth On/Off” on page 100)
Discovery Mode
Allows other users to see your accessibility. Select On for other
devices to see your device, or Off for no visibility.
Tools
102
r560.book Page 103 Tuesday, June 16, 2009 1:04 PM
Device Name
Shows the handset name. You may change this name. Enter the
text and press
or
.
Supported Profiles
Lists and describes the Bluetooth profiles your phone supports.
Device Info
Shows the Bluetooth Type, Status, and Address of your phone.
Calendar
Calendar allows you to view the
current, past, or future month in
calendar format. While viewing the
calendar, the current date is
highlighted, and days with scheduled
events are surrounded by a box.
View an Event
1.
2.
display the specifics of the
From the Tools menu, select
highlighted event. The
Calendar. A calendar appears in the display with the
following options are
current date highlighted. The month and year appear at the
available:
top of the display.
• To change the event details, press
the Edit soft key. (See “Add a
New Event” on page 104 for
more information.)
Use the following options and navigation keys to move
around within the calendar:
103
• To move to an individual day, one day or one week at a time, press
the Navigation keys or Arrow keys.
• To view previous months, press the Up volume key.
• To view future months, press the Down volume key.
• To add an event to the highlighted date, press the Add soft key.
• To call up a list of events on the highlighted date, press VIEW (
or
).
• To access other options while viewing the calendar, press the
Options soft key. The following options pop-up in the display:
– Go to Date — Lets you jump to any date you specify.
– Go to Today — Lets you return to today from any other date.
– Erase Old — Lets you erase past events.
– Erase all — Lets you erase all events.
Select the desired option and perform the related process.
3. Press VIEW ( or
) to
r560.book Page 104 Tuesday, June 16, 2009 1:04 PM
• To return to the Events list, press OK ( or
).
• For more options, press the Options soft key. The following options
appear in the display:
– Monthly — Returns you to the Monthly calendar display.
– Erase — Remove this event from the Calendar.
Select the desired option.
Add a New Event
1.
From the Tools menu, select Calendar.
A calendar appears in the display with the current date
page 34.)
Note: The current mode of text entry is indicated in the lower left corner of
the display.
4.
To set the Start Date, use the keypad to enter the start
date for the event.
5.
To set the Start Time:
display.
• Use the keypad to enter the time for the event.
• Use the Left and Right navigation keys to select AM or PM.
6. Repeat Steps 4 and 5 for the End Date and End Time.
Press the Add soft key. The
7.
highlighted. The month and year appear at the top of the
2.
(For more information, refer to “Entering Text” on
Use the Left and Right navigation keys or arrow keys to
New Event screen appears in
select:
the display.
• Alert type (Tone, Vibrate, Light Only)
• Alert tone (the Alert Tone screen appears in the display. See
“Using My Ringtones Gallery” on page 98 and “Using My
Sounds Gallery” on page 98 for more information.)
• Reminder (Off, Once, Every 2 Minutes, Every 15 Minutes)
• Alert time (15 Min. Before, 30 Min. Before, 1 Hour Before, 3
Hours Before, 5 Hours Before, 1 Day Before, On Time, 5 Min.
Before, 10 Min. Before)
• Use the Up and Down navigation
keys to highlight New Event
options.
• Use the Left and Right navigation
keys to select option values.
• Use the keypad to enter option
values.
3. Enter the Name of the new event using the keypad.
Tools
104
r560.book Page 105 Tuesday, June 16, 2009 1:04 PM
8.
Press SAVE (
or
) to store the event in your calendar.
4.
An alarm will notify you prior to the event, provided you set
Reminder to a value other than Off.
Memo Pad
Create notes and store them in
Memo Pad. Notes that you create in
Return to Memo Pad anytime to
review and edit your notes.
Note: Memo Pad can’t be prioritized or
assigned an alert.
Create a Memo
1.
From the Tools menu, select Memo Pad.
If you have any stored memos, they appear as a list in the
display.
2.
If you don’t have any stored memos, press the Add soft
key to add a memo.
3.
Enter memo text using the keypad. (For more information,
refer to “Entering Text” on page 34.)
Tip: The current mode of text entry is indicated in the lower right corner of
the display.
105
When you’re finished entering details for the memo, press
OK (
or
). The memo is stored.
Review, Edit, and Erase Memos
1.
From the Tools menu, select Memo Pad. Your list of stored
memos appears in the display.
2.
Highlight the desired memo. You have the following
options:
• To add a new memo, press the Add soft key. (For more information,
refer to “Create a Memo” on page 105.)
• To review the highlighted memo, press VIEW ( or
).
While viewing a memo, you can do any of the following:
– Change the text of the memo by pressing the Edit soft key and using
the keypad keys. (For more information, refer to “Entering Text” on
page 34.)
– Return to the Memo Pad screen by pressing OK ( or
).
– Press the Options soft key to Erase the memo you are viewing, Add a
New Memo, or Lock/Unlock the memo you are viewing.
• For more options, press the Options soft key and the following
options appear in the display:
– Edit— Change the text of the highlighted memo by using the keypad.
(For more information, refer to “Entering Text” on page 34.)
– Erase — Erase the highlighted memo.
– Erase all — Erase all of the unlocked memos.
r560.book Page 106 Tuesday, June 16, 2009 1:04 PM
3.
– Lock / Unlock — Prevents/allows erasure of the highlighted memo.
Select the desired option.
2.
wish to set. The selected Set
Alarm Clock
Alarm screen appears in the
display.
Your phone has three alarm clocks that can be set to go off once,
or to recur daily at a specific time. Once set, an alarm clock is
easy to change or turn off completely.
Note: The alarm doesn’t function when the phone is turned off. If the time for
an alarm that was set for Once has elapsed while the phone is off, the
alarm occurs at the specified time on the next day.
Select the alarm clock you
Use the Up and Down
navigation keys to highlight
Set Alarm options.
3.
Use the Left and Right
navigation/arrow keys to set the alarm Off or On.
1.
From the Tools menu, select Alarm Clock. The following
options appear in the display:
• Alarm 1
• Alarm 2
• Alarm 3
4.
To set the Time:
• Enter the time for the alarm using the keypad.
• Use the Left and Right navigation keys to select AM or PM.
5. Use the Left and Right navigation/arrow keys to select the
Frequency at which you wish the alarm to occur (Daily,
Mon.-Fri., Weekends, or Once).
6.
Use the navigation/arrow keys to select the Ringer type
(Tone, Vibrate, Light Only) and ringtone (from My
Ringtones or My Sounds).
Tools
106
r560.book Page 107 Tuesday, June 16, 2009 1:04 PM
7.
When you’re finished entering the time and frequency for
the alarm, press SAVE (
or
). If the alarm is set to On
and if Bluetooth is disabled, the alarm icon (
) appears
in the top of the display.
When an Alarm Sounds
An animated alarm clock appears in the display along with
Snooze and Dismiss options and an alert sounds when the
specified time for the alarm arrives.
• To silence the alarm, use the Navigation key to highlight Snooze or
Dismiss and press .
• If the alarm was set as a Daily alarm, the alarm icon remains in the top
of the display.
• If the alarm was set as a Once only alarm, the alarm icon disappears
from the top of the display.
Turn Off the Alarm
1.
From the Tools menu, select Alarm Clock. The following
options appear in the display:
• Alarm 1
• Alarm 2
• Alarm 3
2. Highlight the desired alarm, then press the Options soft
key.
107
The following options appear in the display:
• On / Off — Enables/disables the highlighted alarm without
changing the settings.
• Reset Alarm — Disables the highlighted alarm and restores its
settings to default values.
• Reset All — Disables all alarms and resets all alarm settings to
default values.
3. Select the desired option.
World Time
World Time lets you view the time of
day or night in any of the 24 different
time zones around the world.
Note: To use World Time, you need to
subscribe to your Wireless Provider’s
digital service.
䊳
From the Tools menu, select
World Time. A world map
appears in the display, showing the time and date in one or
two cities or time zones.
r560.book Page 108 Tuesday, June 16, 2009 1:04 PM
Selecting/Displaying Time Zones
World Time lets you view the time and date in up to two locations
or time zones.
To change a displayed time zone or location, or to view the time
and date in a particular time zone or location, do the following:
1.
Kathmandu
Almaty, Dhaka
Bangkok,
Jakarta, Hanoi
Hongkong,
Beijing
Seoul, Tokyo
Adelaide
Guam, Sydney
Okhotsk
Wellington,
Auckland
Samoa, Midway
HAST/HADT :
Honolulu, Hawaii
AKST/AKDT :
Alaska
PST/PDT : Los
Angeles, San
Francisco
MST/MDT :
Denver, Phoenix
CST/CDT :
Chicago, Dallas
In the World Time screen, highlight the location you wish to
change.
2.
Press the Edit soft key.
3.
Use the Left and Right navigation/arrow keys to browse
locations and their current times. The following locations
are supported.
4.
EST/EDT :
New York, Miami
Caracas, La Paz
Newfoundland
Buenos Aires,
Brasilia
Mid Atlantic
Cape Verde
London, Lisbon
Rome, Paris,
Berlin
Athens, Helsinki,
Istanbul
Moscow, Jidda,
Nairobi
Tehran
Dubai
Kabul
Karachi, Tashkent
Mumbai, New
Delhi
Do one of the following:
• To set the displayed time zone as the default time zone for your
phone, press the Home soft key, press the Yes soft key, then press
or
.
• To set the displayed time zone as the default time zone for the
second World Time clock, press or
.
• To return to the Tools menu without changing the default time
zone, press
or
.
Enable Daylight Saving Time (DST)
1.
Display the desired time zone.
2.
Press the DST Off / DST On soft key.
Tools
108
r560.book Page 109 Tuesday, June 16, 2009 1:04 PM
3.
To accept the highlighted setting, press
or
. The
time zone abbreviation changes from ...ST to ...DT,
indicating that Daylight Saving Time is enabled for the
displayed time zone.
Calculator
You can perform calculations, including addition, subtraction,
multiplication and division using your phone.
Note: You must use the phone keypad to use the Calculator.
1.
From the Tools menu, select Calculator. The Calculator
appears in the display.
2.
screen) to set the type of calculation that you wish to
perform. Your choices are as follows.
• [ + ] Addition
• [ x ] Multiplication
• [ - ] Subtraction
• [ ÷ ] Division
4. Use the keypad to enter the second number into your
equation.
Enter the first number in your
calculation using the keypad.
(Numbers can be up to 9
digits long, and can include a
decimal point followed by up
to 3 more digits.)
• To enter a decimal point, press
.
• To change the sign for a number
to a negative, press
.
109
• To add parentheses [( )] to your calculation or to enter a Power
exponent (^), such as, 3^2, which is the equivalent of 32, press the
Operator soft key.
• Press the Clear soft key) to clear current entries.
3. Use the Navigation keys (as shown in the Calculator
5.
Press
to perform the calculation and view the result.
r560.book Page 110 Tuesday, June 16, 2009 1:04 PM
Stop Watch
• Volume
• Area
You can use this function to set a
stop watch.
1.
• Temperature
From the Tools menu, select
Stop Watch. The Stop Watch
screen appears in the display.
2.
or
.
At the start of each succeeding event/lap, press the
Record soft key to record the completion time for the
previous event/lap. You can record up to eight event/lap
times.
4.
1.
• Currency
• Length
• Weight
• Volume
• Area
• Temperature
2. Select the conversion feature
To reset the stop watch and to erase all stop watch (lap)
times recorded, press the Reset soft key.
Converter
The conversion menu provides the following conversion
categories:
• Currency
• Length
• Weight
From the Tools menu, select Converter. The following list
of converters appears in the display:
To start, stop, and resume the
stopwatch count, press
3.
To convert a currency, length, weight, volume, area, or
temperature, do the following:
you wish to use.
3.
Use the Navigation/Arrow
keys to select the units to be
converted From and To.
Tools
110
r560.book Page 111 Tuesday, June 16, 2009 1:04 PM
4.
Enter the quantity you want converted in the From field.
6.
The converted quantity appears in the To field.
Note: To include a decimal point, press the
The Currency Converter includes long-term average exchange
rates as default values. To review and/or change a default
exchange rate to the current exchange rate, do the following:
1.
From the Tools menu, select Converter ➔ Currency.
2.
Press the Rate soft key. The EXCHANGE RATE list appears
3.
Press EDIT (
in the display.
or
). The EDIT EXCHANGE RATE list
appears in the display.
4.
Highlight a currency whose
exchange rate you wish to
change.
5.
Use the keypad keys to
change the selected exchange
rate value.
111
or
).
To discard the change, press the Cancel soft key.
key.
Currency — Reviewing/Editing Exchange Rates
To save the changed exchange rate, press OK (
The EXCHANGE RATE list appears in the display.
7.
To change any other exchange rates, repeat Steps 3 – 6.
8.
To return to the Converter screen, press
or
.
Currency — Adding Exchange Rates
You can use the Currency Converter to convert from and to
obscure currencies by adding exchange rates for these
currencies. To add a currency and its exchange rate to the
Currency Converter, do the following:
1.
From the Tools menu, select Converter ➔ Currency.
2.
Press the Rate soft key. The EXCHANGE RATE list for the
From currency appears in the display.
r560.book Page 112 Tuesday, June 16, 2009 1:04 PM
3.
Press the Add soft key. The
ADD EXCHANGE RATE screen
appears in the display with the
Base field highlighted.
4.
Use the Left and Right
navigation/arrow keys to
Currency — Erasing Exchange Rates
You cannot erase the preloaded currencies from the Exchange
Rate list. You can erase a currency that you have added to the list
by doing the following:
1.
From the Tools menu, select Converter ➔ Currency.
2.
Press the Rate soft key. The EXCHANGE RATE list for the
From currency appears in the display.
select the Base currency to be
3.
converted from.
5.
to 5 characters for the new currency using either keypad.
4.
6.
Highlight the Exchange Rate field, and enter a decimal
exchange rate for the new currency using either keypad.
Note: Press the
key to enter the decimal point.
The Exchange Rate field only accepts up to five digits after the
decimal point.
7.
Press SAVE (
or
) to save the new exchange rate.
Press the Erase soft key. You are prompted to confirm the
erasure.
(For more information, refer to “Entering Text” on
page 34.)
Use the Up and Down navigation keys to highlight the useradded currency exchange rate to be erased.
Highlight the Currency field, and enter an identifier of up
Note: The Erase soft key is undefined for preloaded Exchange Rates. This
prevents you from erasing them.
5.
To erase the selected exchange rate, press the Yes soft
key. To keep selected exchange rate, press the No soft
key.
Tip Calculator
Tip Calculator automatically calculates the following amounts:
• Gratuity (tip)
• Individual payment (for groups)
Tools
112
r560.book Page 113 Tuesday, June 16, 2009 1:04 PM
Calculations are based on the total amount of the check, a
selected gratuity percentage, and the number of people paying.
1.
From the Tools menu, select Tip Calculator. The Tip
Calculator screen appears in screen, with the Bill field
highlighted.
2.
Use the keypad to enter the
total amount of the bill.
3.
If needed, highlight the Tip
field, and enter a tip
percentage.
4.
If needed, highlight the #
Paying field, and enter the
number of persons paying.
5.
The amount of the Tip, the final Total, and the amount Each
person should pay appear in the lower half of the screen.
113
r560.book Page 114 Tuesday, June 16, 2009 1:04 PM
Section 14: Settings
This section explains how to configure your phone’s language,
network preferences, security options, and other settings.
Accessing Your Phone’s Settings
To launch the Settings menu:
䊳
In standby mode, press the Menu soft key, then select
Settings.
The Settings menu appears in the display.
Location Setting
You can set your phone to pass Global Positioning System (GPS)
data to identify your location to the network continually or only
when you make an emergency (911) call.
Note: Check with your Wireless Carrier to determine if/when/where locationbased services are available.
1.
From the Settings menu, select Location. The following
Location options appear in the display:
• Location On — Your location data is continually sent wherever the
feature is available.
• 911 Only — Your location data is sent only when you dial 911.
2.
Select the desired setting. The Settings menu appears in
your display.
Display Settings
Display settings let you change your phone’s menu appearance,
display brightness and contrast, and display content to better
meet your needs.
1.
From the Settings menu, select Display Settings. The
following menus appear in the display:
• Wallpaper — Choose the images that appear as background in
the Main display on your phone while in standby mode.
• Clock — Choose whether the time and date appear in the Main
and Front displays on your phone in optional digital or analog (clock
face) style or in the default digital style.
• Banner — Lets you change or replace the text greeting that
appears in the display when your phone is in standby mode. Also
lets you enable/disable an ERI (Extended Roaming Indicator)
banner.
• Backlight — Set backlight options for the Main Display, Keypad,
backlight Brightness, and Charging.
• Shortcut Icon — Lets to enable or disable the Shortcut Icon bar in
the standby screen.
Settings
114
r560.book Page 115 Tuesday, June 16, 2009 1:04 PM
2.
Select the desired sub-menu. The following sections
describe the Display sub-menus in greater detail.
Wallpaper
Wallpaper lets you choose images that appear in the background
on your phone’s Main display while in standby mode.
1.
From the Settings menu, select Display Settings ➔
Wallpaper. The following options appear:
• My Images — Lets you select an image that you’ve downloaded
or a picture you’ve taken with the camera.
• Preset Images — Lets you select an image that came preloaded
with your phone.
2. Select the image type you wish to use. A list of images
appears in the display.
3.
Select the image you wish to use.
Clock
Lets you choose whether the time and date appear in the Main
display on your phone in optional digital or analog (clock face)
style or in the default digital style.
1.
From the Settings menu, select Display Settings ➔
Clock.
The following clock options appear in the display:
115
• On — Time, date, and day of the week are shown using an
alternate, large digital format.
• Off — Time, date, and day of the week do not appears.
2. Select the clock option that you wish to use.
Banner
Create your own personalized greeting that appears in the
display while your phone is in standby mode.
1.
From the Settings menu, select Display Settings ➔
Banner. The following sub-menus appear in the display:
• Personal
• ERI Banner
2. Select the desired banner.
• If you select Personal, the Banner screen appears in the display
with the Enter Text field highlighted.
– Enter a word or short phrase to appear in your phone’s display
while in standby mode (Up to 12 characters). See “Entering
Text” on page 34 for more information.
Tip: Press and hold
to erase an existing banner, if necessary.
Press OK ( or
) to save your changes.
• If you select ERI Banner, the following options appear in the
display:
r560.book Page 116 Tuesday, June 16, 2009 1:04 PM
– On
– Off
Select the desired setting.
Backlight
You can set the backlight for your display or keypad to remain on
for a specified period of time or remain on as long as the folder is
open.
Note: Prolonged backlight use drains your battery faster.
1.
From the Settings menu, select Display Settings ➔
Backlight.
The following sub-menus appear in the display:
• Main Display — Sets the time the internal display backlight
remains on after a period of inactivity. Optional settings are: 10
seconds, 15 seconds, 30 seconds, Always On, and Always
Off.
• Keypad — Sets the amount of time the keypad backlight remains
on after a period of inactivity. Optional settings are: 10 seconds, 15
seconds, 30 seconds, Always On, and Always Off.
• Brightness — Use the Left and Right navigation keys to select
between any of 5 optional settings.
• Charging — Sets the amount of time the display backlight remains
on while the battery is charging. Optional settings are: 10 seconds,
15 seconds, 30 seconds, Always On, and Always Off.
2. Use the Up and Down navigation keys to highlight the
desired sub-menu and press the
3.
key.
Use the navigation keys to change settings as desired in
the selected sub-menu, and press the
key to save your
selection.
Shortcut Icon
Shortcut Icon lets you display or hide a list of icons that serve as
shortcuts for launching applications on your Tint™.
Note: For more information, refer to “Main Display — Shortcut Icon On” on
page 14.
1.
From the Settings menu, select Display Settings ➔
Shortcut Icon. The following options appear in the display:
• On — Shortcut Icons list appears in the display when your phone is
in standby mode.
• Off — Shortcut Icons list does not appear in the display.
2. Select the preferred Shortcut Icon option.
Settings
116
r560.book Page 117 Tuesday, June 16, 2009 1:04 PM
Sound Settings
Sound Settings let you customize your phone’s audio properties,
such as ringers, keypad tones, alerts, start up melody, and more.
Volume
Ringer Type
You can assign ring tones and melodies for calls, alarms, and
other alerts in the Ringer Type sub-menu.
1.
1.
From the Settings menu, select Sound Settings ➔
Volume. The following options appear in the display:
• Voice Calls — Lets you set your phone’s Voice Calls ringer to be
Off, to Vibrate, or to play a selected ringtone, melody, or sound at
Low – High/Vibrate volume.
• Messages — Lets you set your phone’s New Messages ringer to
be Off, to Vibrate, or to play a selected ringtone, melody, or sound at
Low – High/Vibrate volume.
• Alarms — Lets you set your phone’s Alarms ringer to be Off, to
Vibrate, or to play a selected ringtone, melody, or sound at Low –
High/Vibrate volume.
2. Select the desired option, then select the desired volume
display:
• Voice Calls
• Messages
– Text Message
– Picture Message
– Voicemail
• Roam Ringer
2. Select a ringer type. The following ringtone/sounds
galleries appear in the display:
• My Ringtones
• My Sounds
3. Select the desired gallery.
level (Ringer Off, Low, Low/Medium, Medium, Medium/
High, or High) or vibrate mode (Vibrate, Vibrate/High).
From the Settings menu, select Sound Settings ➔
Ringer Type. The following ringer types appear in the
Use the Volume sub-menu to set the default volume for call
ringers, message alerts, and alarms.
4.
Select the desired ringtone, melody, or sound file.
Tip: To play each tone, melody, or sound file as you scroll through the list,
press the Play soft key.
117
r560.book Page 118 Tuesday, June 16, 2009 1:04 PM
Alerts
Key Tone
You can set your phone to sound an alert whenever you enter or
leave your service area, connect or disconnect a call, and other
options.
Lets you adjust the volume level and duration of the tones that
the keypad generates when you press the keys.
From the Settings menu, select Sound Settings ➔
Tone. The following options appear in the display:
1.
Alerts. The following alerts appear in the display:
• Minute Beep — Sound an alert ten seconds before each elapsed
minute of a call.
• Roam/SVC Alert — Sound an alert when you leave your home
service area while on a call.
• Call Connect — Sound an alert when you connect/disconnect a
call.
• Power On/Off — Play power on and power off melodies.
• Voice Privacy Alert — Sound an alert when available voice privacy
changes. (For more information, refer to “Voice Privacy” on
page 120.)
2. Select the desired alert. The following options appear in
the display:
• On
• Off
3. Select active (On) or inactive (Off) for the selected alert.
1.
From the Settings menu, select Sound Settings ➔ Key
• Tone Level — Select the desired Keypad volume level (Off, Low,
Low/Medium, Medium, Medium/High, or High).
• Tone Length — Select the desired DTMF Tones length as Short or
Long.
2. Select the desired option and setting.
Call Settings
The Call Settings sub-menu lets you set call options such as Auto
Retry, Data rates for data calls, and more.
Call Answer
You can select a specific answer mode when you receive an
incoming call. Your phone can be preset to answer when you do
any of the following:
1.
From the Settings menu, select Call Settings ➔ Call
Answer. The following call answer options appear in the
display:
• Any Key — Pressing any key except
answers a call.
,
, or
Settings
118
r560.book Page 119 Tuesday, June 16, 2009 1:04 PM
2.
• Send Key — Only pressing
Select the desired option.
answers a call.
Call Alert
Call Alert lets you select what sounds your phone plays to notify
you of incoming calls.
1.
From the Settings menu, select Call Settings ➔ Call
Alert. The following call alert options appear in the display:
• Ring Only — Either the Voice Calls ringer or a Contact’s individual
Ringtone plays.
• Caller ID + Ring — Either the Voice Calls ringer or a Contact’s
individual Ringtone plays while a voice reads “Call from” followed
by the Caller ID or Contact’s name.
• Name Repeat — A voice repeatedly reads “Call from” followed by
the Caller ID or Contact’s name.
2. Select the desired option.
Auto Answer
Auto Answer enables your phone to automatically answer calls
after a period of time that you specify.
1.
From the Settings menu, select Call Settings ➔ Auto
Answer. The following options appear in the display:
• Off
• After 1 Second
119
• After 3 Seconds
• After 5 Seconds
2. Select the desired setting.
Auto Retry
Auto Retry automatically re-dials a number if there is no answer
or the dialed party is busy. Depending upon your location, the
number of times your phone redials a number may vary.
1.
From the Settings menu, select Call Settings ➔ Auto
Retry. The following options appear in the display:
• Off
• Every 10 Seconds
• Every 30 Seconds
• Every 60 Seconds
2. Select the desired setting.
TTY Mode
Your phone is fully Teletypewriter (TTY)/Telecommunication
Device for the Deaf (TDD) compatible. You connect TTY/TDD
equipment to the headset connector on the top of your phone,
behind the folder hinge.
Note: TTY Mode must be enabled (TTY Full selected) before you can use
your phone with TTY/TDD equipment.
r560.book Page 120 Tuesday, June 16, 2009 1:04 PM
1.
From the Settings menu, select Call Settings ➔ TTY
Mode. A message pops-up warning of possible headset
and non-TTY accessory performance impairment when in
TTY mode and prompting you to confirm that you want to
enable/disable TTY Mode.
• To confirm you want to view/change the TTY Mode setting, press
the Yes soft key.
• To keep the current TTY Mode setting, press the No soft key.
2. The following options appear in the display:
• TTY Full — Enables TTY mode while letting you hear and speak
with the other party.
• TTY + Talk — Enables TTY mode while letting you speak with the
other party.
• TTY + Hear — Enables TTY mode while letting you hear the other
party.
• TTY Off — Disables TTY mode.
Note: The TTY Mode option has no effect on the phone’s earpiece,
microphone, or speaker. When you select TTY Full, all currently
enabled sound functions remain enabled.
3.
Select the desired setting. If you select a setting other that
TTY Off, you’re returned to the previous menu and the TTY
icon (
) appears in the top of the display.
Voice Privacy
Voice Privacy lets you choose what level of voice security
(Standard or Enhanced) your phone will use.
Tip: You can change your Voice Privacy setting during a call by using the InUse Menu options. (See “In-Use Menu” on page 27 for more
information.)
1.
From the Settings menu, select Call Settings ➔ Voice
Privacy. The following options appear in the display:
• Standard
• Enhanced
2. Select the desired setting.
Data Settings
Use the Data Settings sub-menu to set your phone to detect
data connections automatically.
1.
From the Settings menu, select Call Settings ➔ Data
Settings. The following options appear in the display:
• Data Off — Your phone ignores data connections.
• Data For Next Call — Your phone accepts data connection for the
next call.
• Data Until Powered Off — Your phone accepts data connections
until you turn off your phone.
Settings
120
r560.book Page 121 Tuesday, June 16, 2009 1:04 PM
2.
Select the desired setting.
Hearing Aid Mode
Tip: If you need to make an emergency call with Airplane mode enabled, just
dial the emergency number and press
.
Your Samsung Messager II phone lets you select whether to
operate with hearing aids.
1.
From the Settings menu, select Call Settings ➔ Hearing
Aid Mode. The following options appear in the display:
• On — Enables hearing aid support in your phone.
• Off — Disables hearing aid support.
2. Select the desired setting.
• Off — Enables the radio transmitter and receiver in your phone.
Note: Press
2.
121
From the Settings menu, select Phone Settings ➔
To change to the new setting, press the Yes soft key. You
are returned to standby mode.
To discard the change and keep the original setting, press
Airplane Mode
1.
Select the desired setting. You are prompted to confirm
your setting change.
3.
Phone Settings
When set to On, Airplane Mode disables all radio functions of
your phone. This prevents you from making or receiving calls, but
allows you to use other features (such as the camera and the
Tools) safely in sensitive environments, such as on board an
aircraft.
to return to the Phone Settings menu.
the No soft key. The Airplane Mode screen remains in the
display.
Language
The Language option changes the language of menus, submenus, and other user-interface features.
1.
From the Settings menu, select Phone Settings ➔
Airplane Mode. The following options appear in the
Language.
display:
The following options appear in the display:
• On — Disables the radio transmitter and receiver and the
Bluetooth interface in your phone.
• English
• Español
r560.book Page 122 Tuesday, June 16, 2009 1:04 PM
2.
Select your language preference.
Security
Note: The default lock code is the last four digits of your mobile phone
number.
Use the Security sub-menu to lock your phone, set up emergency
numbers, enable or disable voice privacy, set restrictions, and
other security options.
Lock Phone
Locking the phone blocks all outgoing calls except those to 911
and to the three user-programmed emergency numbers. You can
lock the phone manually, or set the phone to lock automatically
when turned on. In Lock mode, you can answer calls, but you
must unlock the phone to place calls (except to emergency and
secret numbers).
Important!: If you change the NAM1 setting after setting the phone to lock
upon power-up and did not program a number into NAM2, you
won’t be able to access your phone. You must call the Service
Center to unlock your phone.
1.
From the Settings menu, select Phone Settings ➔
Security.
The “Enter Code” prompt disappears and the Security
menu appears in the display.
3.
display:
• Lock — The phone locks immediately and stays locked until you
enter the lock code.
• Unlock — The phone remains unlocked.
• On Power Up — The phone locks automatically the next time your
phone is powered on and stays locked until you enter the lock code.
4. Select the Lock Phone option of your choice.
Change Lock
The default lock code is generally the last four digits of your
phone number. It is advisable to change the default lock code to a
secret code for security purposes.
1.
From the Settings menu, select Phone Settings ➔
Security.
The “Enter Code” prompt appears in the display.
2.
Select Lock Phone. The following options appear in the
The “Enter Code” prompt appears in the display.
Enter the four-digit lock code using the keypad.
2.
Enter the four-digit lock code using the keypad.
Settings
122
r560.book Page 123 Tuesday, June 16, 2009 1:04 PM
Note: The default lock code is the last four digits of your mobile phone
number.
3.
Select Change Lock.
Important!: Because of various transmission methods, network parameters,
and user settings used to complete a call from your wireless
phone, a connection cannot always be guaranteed. Therefore,
emergency calling may not be available on all wireless networks
at all times.
The “New Lock Code” prompt appears in the display.
4.
Enter the New Lock Code. You’re prompted to re-enter the
Important!: DO NOT depend on this phone as a primary method of calling
911 or for essential or emergency calls.
New Lock Code for verification.
5.
Enter the new lock code again. Your changes are stored.
Note: Your phone does not allow you to view the lock code for obvious
security reasons. If you change the lock code, be sure to write down or
memorize the new code.
Remember to always turn your phone on and check for adequate
signal strength before placing a call.
Note: When you dial an emergency number, you phone locks itself to the
emergency location that answered the call and locks itself in 911-Only
mode, blocking from dialing any number but an emergency number.
Emergency #
You have the option of storing up to three emergency numbers to
your phone. Each number can be up to 32 digits in length. All
emergency numbers can be dialed any time, even when your
phone is locked or restricted.
Note: Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked or restricted. If
you call 911 an audible tone is heard and an Emergency prompt
appears in the display for the duration of the call.
123
Store Emergency Numbers
1.
From the Settings menu, select Phone Settings ➔
Security.
The “Enter Code” prompt appears in the display.
2.
Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone
number.
r560.book Page 124 Tuesday, June 16, 2009 1:04 PM
The “Enter Code” prompt disappears and the Security
1.
From the Settings menu, select Phone Settings ➔
menu appears in the display.
Security.
3.
Select Emergency #.
The “Enter Code” prompt appears in the display.
4.
Select one of the three emergency numbers.
5.
Enter the emergency number (up to 32 digits in length).
6.
To save the number that you entered, press OK (
2.
or
Note: The default lock code is the last four digits of your mobile phone
number.
).
7.
The “Enter Code” prompt disappears and the Security
To discard your entry and return to the previous menu,
press the Cancel soft key.
menu appears in the display.
3.
In standby mode, enter the emergency number using
4.
either keypad.
2.
Press
Reset Phone returns all setup parameters (except for the
Contacts entries) to their factory default values.
To reset your phone to factory default settings, press the
Yes soft key.
to place the call.
Reset Phone
Select Reset Phone. A prompt appears in the display to
restore default settings (except for Contacts).
Call Emergency Numbers in Lock Mode
1.
Enter the four-digit lock code using the keypad.
To keep the current settings, press the No soft key.
Erase All Entries
Erase All Entries deletes all entries from the Contacts list.
1.
From the Settings menu, select Phone Settings ➔
Security.
Caution!: Before selecting Reset Phone, contact your Wireless Carrier.
Invoking Reset Phone may erase settings made by your Wireless
Carrier from your phone, resulting in loss of service.
The “Enter Code” prompt appears in the display.
2.
Enter the four-digit lock code using the keypad.
Settings
124
r560.book Page 125 Tuesday, June 16, 2009 1:04 PM
Note: The default lock code is the last four digits of your mobile phone
number.
The “Enter Code” prompt disappears and the Security
menu appears in the display.
3.
Select Erase All Entries.
3.
display:
• Outgoing — Restrict/allow outgoing calls.
• Incoming — Restrict/allow incoming calls.
• Contacts — Restrict/allow access to your Contacts list.
4. Select the desired option and select the desired setting [On
The “Erase all entries?” prompt appears in the display.
4.
To reset your Contacts list, press the Yes soft key.
To keep the current Contacts entries, press the No soft key.
Restriction
Restriction lets you restrict the use of your phone for outgoing
calls, incoming calls, and calls placed by/to your Contacts.
1.
From the Settings menu, select Phone Settings ➔
Security.
The “Enter Code” prompt appears in the display.
2.
Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone
number.
The “Enter Code” prompt disappears and the Security
menu appears in the display.
125
Select Restriction. The following options appear in the
(restricted) / Off (unrestricted)].
Note: The default restriction settings are all Off.
NAM Selection
NAM Selection allows you to set your preferred system. Contact
your wireless carrier for more information.
1.
From the Settings menu, select Phone Settings ➔ NAM
Selection.
The following NAM options appear in the display:
• NAM 1 — Your service contract has one phone number.
• NAM 2 — Your service contract has two phone numbers.
2. Select the desired setting. The phone automatically
restarts.
r560.book Page 126 Tuesday, June 16, 2009 1:04 PM
System Select
The System Select feature enables you to automatically or
manually select the network used when roaming outside of your
home area.
1.
From the Settings menu, select Phone Settings ➔
Note: In digital service mode, the Set Time feature is disabled. The network
adjusts time and date automatically.
With Airplane Mode set to On, the Set Time feature is enabled.
1.
The following roaming options appear in the display:
• MetroPCS only — Roaming is OFF. If your home system is not
available then your call will not be connected, and the no service
icon (
) appears in the display. In some service areas, an
operator may come on-line and ask you how you would prefer to
pay for the call.
• Automatic — Roaming is ON. It will always try your calls using the
Preferred Roaming List (PRL) loaded into your phone. If a preferred
service is not found, then this option will attempt to acquire any
digital service.
2. Select the desired Roam setting.
The Phone Settings menu appears in the display.
Set Time
Use the Set Time option to set the current time and date.
From the Settings menu, select Phone Settings ➔ Set
Time. The following options appear in the display:
System Select.
• Set Time
• Set Date
2. Select Set Time. The Set Time screen appears in the
display.
3.
Enter the current time using your keypad:
• The hour and minute must be entered using two digits each. You
must enter the hour in 12-hour format.
• Use the Left and Right navigation keys to select am or pm.
4. Press OK ( or
) to save the time. The following
options appear in the display:
• Set Time
• Set Date
5. Select Set Date. The Set Date screen appears in the
display.
Settings
126
r560.book Page 127 Tuesday, June 16, 2009 1:04 PM
6.
Enter the current date using your keypad:
2.
• The month and day must be entered using two digits each.
• The year must be entered with all four digits.
7. Press OK ( or
) to save the date.
appears in the display with the first matching contact
name in a list highlighted.
3.
Quick Search
Highlight the desired Contact and press
to call the
contact.
Quick Search is an easy way to locate contacts in your Address
Book and Menu items.
1.
Press the Up navigation key. The Contacts Find screen
Searching for a Menu Item
1.
In standby mode, press the first few numeric keys that
From the Settings menu, select Phone Settings ➔ Quick
correspond to the letters of the Menu item name.
Search.
For example, to search for “Inbox” you would enter
The following options appear in the display:
• On
• Off
2. Select the desired option.
I
Searching for a Contact
1.
2.
N
B
O
X
Press the Down navigation key. The Menu List screen
appears in the display with the first matching menu item in
In standby mode, press the first few numeric keys that
a list highlighted.
correspond to the letters of the contact’s name.
For example, to search for “Sally” you would enter
3.
Select the desired menu item.
PC Connection
S
127
A
L
L
Y
PC Connection lets you allow or block PC connections to your
phone, using an optional USB Data Cable.
r560.book Page 128 Tuesday, June 16, 2009 1:04 PM
1.
From the Settings menu, select Phone Settings ➔
PC Connection. The following settings appear in the
Turn the screen backlight on by pressing any key.
2.
display:
• USB Mass Storage — Your phone appears as a removable disk
drive to your PC, allowing you to transfer files (such as, music or
text files) to and from your phone.
• No Connection — Blocks connection and file transfers with a PC.
2. Select the desired setting.
Auto Key Lock
With Auto Key Lock set to On, your phone automatically disables
its keys when the screen backlight goes out with the phone
closed.
1.
display:
• On
• Off
2. Select the desired option.
To unlock the keys:
1.
the display.
3.
Open the QWERTY keypad,
Press
.
Memory Info
Memory Info shows the amount of phone memory that is
available and used, and details the distribution of the used
memory.
Save Options
1.
From the Settings menu, select Memory Info ➔
Save Options ➔ Images / Videos. The following options
From the Settings menu, select Phone Settings ➔
Auto Key Lock. The following settings appear in the
Press the Unlock soft key. “Press * to unlock” pops-up in
appear in the display:
• Phone Memory — Stores pictures taken with your phone’s
camera in the phone’s memory.
• Card Memory — Stores pictures taken with your phone’s camera
in an optional microSD™ Memory Card.
2. Select the desired setting.
Phone Memory
1.
From the Settings menu, select Memory Info ➔
Phone Memory.
– Or –
Settings
128
r560.book Page 129 Tuesday, June 16, 2009 1:04 PM
The following options appear in the display:
• Memory Usage — Shows Total phone memory, total memory
Available, and memory quantities used to store Images, Ringtones,
Sounds, Applications, and Picture messages.
• My Images — Lists the photos stored in the My Images folder.
Lets you copy photos to an optional Memory Card or lets you make
used memory available by erasing unwanted photos or by moving
photos to an optional Memory Card.
• My Videos — Lists the videos stored in the My Videos folder. Lets
you copy Videos to an optional Memory Card or lets you make used
memory available by erasing unwanted videos or by moving videos
to an optional Memory Card.
• My Ringtones — Lists the downloaded ringtones stored in the My
Ringtones folder. Lets you make used memory available by erasing
unwanted recorded sounds.
• My Sounds — Lists the recorded sounds stored in the My Sounds
folder. Lets you make used memory available by erasing unwanted
recorded sounds.
2. Select the desired option.
3.
To delete/move selected photos, downloaded ringtones, or
recorded sounds:
• Select My Images, My Videos, My Ringtones, or My Sounds.
• Press the Options soft key, then select Erase, Move, or Copy. The
selected Erase or Move/Copy (to an optional Memory Card) screen
appears in the display.
129
• Mark individual files by highlighting each file, then pressing MARK
( or
); or mark all files by pressing the Mark All soft key.
• Press the Done soft key. You are prompted to confirm the
erasure(s)/move(s).
– To erase/move/copy the selected file(s), press the Yes soft key.
– To keep the selected file(s), press the No soft key.
Card Memory
1.
From the Settings menu, select Memory Info ➔
Card Memory. The following options appear in the display:
• Memory Usage — Shows Total phone memory, total memory
Available, and memory quantities used to store Images and Music.
• My Images — Lists the photos stored in the My Images folder.
Lets you copy photos to phone memory or lets you make used card
memory available by erasing unwanted photos or by moving photos
to phone memory.
• My Videos — Lists the videos stored in the My Images folder. Lets
you copy videos to phone memory or lets you make used card
memory available by erasing unwanted videos or by moving videos
to phone memory.
• My Music — Lists the downloaded Music files stored in the My
Music folder. Lets you make used card memory available by
erasing unwanted Music files.
• My Ringtones — Lists the downloaded ringtones stored in the My
Ringtones folder. Lets you make used memory available by erasing
unwanted recorded sounds.
r560.book Page 130 Tuesday, June 16, 2009 1:04 PM
• My Sounds — Lists the recorded sounds stored in the My Sounds
folder. Lets you make used memory available by erasing unwanted
recorded sounds.
• Format Card — Erases the current contents of the optional
Memory Card (if any) and replaces it with a set of folders needed by
your phone.
Formatting a Memory Card
1.
phone. (For more information, refer to “Install a Memory
Card” on page 7.)
2.
Select the desired option.
3.
To delete/move selected photos, videos, or downloaded
ringtones:
• Select My Images, My Videos, My Ringtones, or My Sounds.
• Press the Options soft key, then select Erase, Move, or Copy. The
selected Erase or Move/Copy (to phone memory) screen appears in
the display.
• Mark individual files by highlighting each file, then pressing MARK
( or
); or mark all files by pressing the Mark All soft key.
• Press the Done soft key. You are prompted to confirm the
erasure(s)/move(s).
– To erase/move/copy the selected file(s), press the Yes soft key.
– To keep the selected file(s), press the No soft key.
From the Settings menu, select Memory Info ➔ Card
Memory ➔ Format Card. You are prompted to confirm that
Note: This option prepares new, unformatted microSD™ Memory Cards for
use with your phone. Repeated formatting of a Memory Card can
shorten its service life. Erase files rather that format the Memory Card.
2.
Insert an optional microSD™ Memory Card into your
you want to format the Memory Card.
3.
4.
To format the Memory Card, press the Yes soft key.
To return to the Card Memory menu without formatting the
Memory Card, press the No soft key.
Phone Info
Phone Info lets you identify the hardware and software versions
of your phone and to identify the phone number assigned to your
phone.
Phone Number
This option causes the Phone Number screen to appear in the
display and show the ten-digit number assigned to your phone by
your Wireless Carrier.
1.
From the Settings menu, select Phone Info ➔ Phone
Number. The phone number assigned by your Wireless
Carrier appears in the display.
Settings
130
r560.book Page 131 Tuesday, June 16, 2009 1:04 PM
2.
Press OK (
) to return to the Phone Info menu.
or
Icon Glossary
This option causes the ICON GLOSSARY list to appear in the
display and show the icons that can appear in the display and the
names of the icons.
1.
display shows in the display.
Press OK (
) to return to the Phone Info menu.
or
Version
You can view the PRL (Preferred Roaming List), ERI (Extended
Roaming Indicator), software version, Browser version, @metro
version, and hardware version on your phone. This feature is
helpful if you need to contact Customer Service.
From the Settings menu, select Phone Info ➔ Version.
Hardware and software information for your phone
appears in the display.
2.
Press the OK (
menu.
131
1.
or
) key to return to the Phone Info
From the Settings menu, select Phone Info ➔ MEID.
MEID Dec and MEID Hex numbers for your phone appear in
the display.
2.
A list of the icons that can appear on the top line of the
1.
Lists the MEID number for your phone in decimal (MEID Dec) and
hexadecimal (MEID Hex) formats.
From the Settings menu, select Phone Info ➔ Icon
Glossary.
2.
MEID
Press the OK (
menu.
or
) key to return to the Phone Info
r560.book Page 132 Tuesday, June 16, 2009 1:04 PM
Section 15: Health and Safety Information
This section outlines the safety precautions associated with using
your phone. These safety precautions should be followed to
safely use your phone.
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. government.
These FCC exposure limits are derived from the
recommendations of two expert organizations, the National
Counsel on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of
absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC.
For body worn operation, this phone has been tested and meets
FCC RF exposure guidelines when used with an accessory that
Health and Safety Information
132
r560.book Page 133 Tuesday, June 16, 2009 1:04 PM
contains no metal and that positions the handset a minimum of
1.5 cm from the body.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
• Head: 1.10 W/Kg.
• Body-worn: 1.33 W/Kg.
SAR information on this and other model phones can be viewed
online at http://www.fcc.gov/oet/ea. To find information that
pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be
obtained at www.fcc.gov/cgb/sar.
133
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile phones and genuine
Samsung accessories.
Go to: https://fun.samsungmobileusa.com/recycling/index.jsp for more
information.
UL Certified Travel Adapter
The Travel Adapter for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY
DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
r560.book Page 134 Tuesday, June 16, 2009 1:04 PM
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a
series of Questions and Answers for consumers relating to radio
frequency (RF) exposure from wireless phones. The FDA
publication includes the following information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called "cell," "mobile," or
"PCS" phones. These types of wireless phones can expose the
user to measurable radio frequency energy (RF) because of the
short distance between the phone and the user's head. These RF
exposures are limited by Federal Communications Commission
safety guidelines that were developed with the advice of FDA and
other federal health and safety agencies.
When the phone is located at greater distances from the user, the
exposure to RF is drastically lower because a person's RF
exposure decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at
far lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radio frequency energy (RF) in
the microwave range while being used. They also emit very low
levels of RF when in the stand-by mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research. In some
cases, other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiationemitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level
that is hazardous to the user. In such a case, FDA could require
the manufacturers of wireless phones to notify users of the
Health and Safety Information
134
r560.book Page 135 Tuesday, June 16, 2009 1:04 PM
health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory
actions, FDA has urged the wireless phone industry to take a
number of steps, including the following:
• Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
• Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
• Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human
health.
FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency
working group activities, as well.
135
FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. FCC relies on FDA and other
health agencies for safety questions about wireless phones.
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF
exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless
phones.
Base stations are thus not the primary subject of the safety
questions discussed in this document.
What are the results of the research done already?
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of radio
frequency energy (RF) exposures characteristic of wireless
phones have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many of
the studies that showed increased tumor development used
animals that had been genetically engineered or treated with
r560.book Page 136 Tuesday, June 16, 2009 1:04 PM
cancer-causing chemicals so as to be pre-disposed to develop
cancer in absence of RF exposure. Other studies exposed the
animals to RF for up to 22 hours per day. These conditions are
not similar to the conditions under which people use wireless
phones, so we don't know with certainty what the results of such
studies mean for human health.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
However, none of the studies can answer questions about longterm exposures, since the average period of phone use in these
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies
of people actually using wireless phones would provide some of
the data that are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large numbers of
animals would be needed to provide reliable proof of a cancer
promoting effect if one exists. Epidemiological studies can
provide data that is directly applicable to human populations, but
ten or more years' follow-up may be needed to provide answers
about some health effects, such as cancer.
This is because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if they do may be many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at which the
phone is held, or which model of phone is used.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
questions about the effects of exposure to radio frequency
energy (RF).
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields (EMF) Project
since its inception in 1996. An influential result of this work has
been the development of a detailed agenda of research needs
that has driven the establishment of new research programs
around the world. The Project has also helped develop a series of
public information documents on EMF issues.
Health and Safety Information
136
r560.book Page 137 Tuesday, June 16, 2009 1:04 PM
FDA and Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety.
FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations.
CTIA-funded research is conducted through contracts to
independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The
CRADA will also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not
know that there is - it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
• If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the source
of the RF, since the exposure level drops off dramatically with distance.
For example, you could use a headset and carry the wireless phone
137
away from your body or use a wireless phone connected to a remote
antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless phone
use.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want to
take steps to lower exposure to radio frequency energy (RF), the
measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and the
RF source will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless phones
at all. For example, the government in the United Kingdom
distributed leaflets containing such a recommendation in
December 2000.
They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to
limit wireless phone use by children was strictly precautionary; it
r560.book Page 138 Tuesday, June 16, 2009 1:04 PM
was not based on scientific evidence that any health hazard
exists.
Do hands-free kits for wireless phones reduce risks from
exposure to RF emissions?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that handsfree kits reduce risks. Hands-free kits can be used with wireless
phones for convenience and comfort. These systems reduce the
absorption of RF energy in the head because the phone, which is
the source of the RF emissions, will not be placed against the
head. On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones marketed in
the U.S. are required to meet safety requirements regardless of
whether they are used against the head or against the body.
Either configuration should result in compliance with the safety
limit.
Do wireless phone accessories that claim to shield the
head from RF radiation work?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those emissions
reduce risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing
more than a metallic accessory attached to the phone. Studies
have shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold devices that
claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims.
According to FTC, these defendants lacked a reasonable basis to
substantiate their claim.
What about wireless phone interference with medical
equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, FDA helped
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Advancement of Medical instrumentation (AAMI). The final draft,
a joint effort by FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI. FDA has tested
Health and Safety Information
138
r560.book Page 139 Tuesday, June 16, 2009 1:04 PM
wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance
requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a compatible phone and
a compatible hearing aid at the same time. This standard was
approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful
interference be found to occur, FDA will conduct testing to assess
the interference and work to resolve the problem.
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(Updated 12/9/2008):
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/index.html
• National Institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/homepage.html
• World Health Organization (WHO):
http://www.who.int/peh-emf/
139
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• Health Protection Agency:
http://www.hpa.org.uk/radiation
• US Food and Drug Administration:
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of wireless
phones, one that every user must uphold.
When driving a car, driving is your first responsibility. When using
your wireless phone behind the wheel of a car, practice good
common sense and remember the following tips:
1.
Get to know your wireless phone and its features, such as
speed dial and redial. If available, these features help you
to place your call without taking your attention off the road.
2.
When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
r560.book Page 140 Tuesday, June 16, 2009 1:04 PM
3.
Position your wireless phone within easy reach. Be able to
7.
may be distracting. Make people you are talking with
from the road. If you get an incoming call at an
aware you are driving and suspend conversations that
inconvenient time, let your voice mail answer it for you.
4.
Let the person you are speaking with know you are driving;
have the potential to divert your attention from the road.
8.
if necessary, suspend the call in heavy traffic or hazardous
traffic can be hazardous.
or medical emergencies.
9.
Use your wireless phone to help others in emergencies. If
Do not take notes or look up phone numbers while driving.
you see an auto accident, crime in progress or other
Jotting down a "to do" list or flipping through your address
serious emergency where lives are in danger, call 9-1-1 or
book takes attention away from your primary
other local emergency number, as you would want others
responsibility, driving safely.
6.
Use your wireless phone to call for help. Dial 9-1-1 or other
local emergency number in the case of fire, traffic accident
weather conditions. Rain, sleet, snow, ice and even heavy
5.
Do not engage in stressful or emotional conversations that
access your wireless phone without removing your eyes
Dial sensibly and assess the traffic; if possible, place calls
to do for you.
10. Call roadside assistance or a special non-emergency
when you are not moving or before pulling into traffic. Try
wireless assistance number when necessary. If you see a
to plan calls when your car will be stationary. If you need to
broken-down vehicle posing no serious hazard, a broken
make a call while moving, dial only a few numbers, check
traffic signal, a minor traffic accident where no one
the road and your mirrors, then continue.
appears injured, or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency
number.
Health and Safety Information
140
r560.book Page 141 Tuesday, June 16, 2009 1:04 PM
"The wireless industry reminds you to use your phone safely when
driving."
For more information, please call 1-888-901-SAFE, or visit our
web-site www.ctia.org.
Important!: If you are using a handset other than a standard numeric keypad,
please call 1-888-901-7233.
Provided by the Cellular Telecommunications & Internet
Association.
Responsible Listening
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations. Prolonged exposure to
loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that
using portable audio devices, such as portable music players and
cellular telephones, at high volume settings for long durations
may lead to permanent noise-induced hearing loss. This includes
the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices). Exposure to very loud sound
has also been associated in some studies with tinnitus (a ringing
in the ear), hypersensitivity to sound and distorted hearing.
141
Individual susceptibility to noise-induced hearing loss and
potential hearing problem varies. Additionally, the amount of
sound produced by a portable audio device varies depending on
the nature of the sound, the device settings, and the headphones
that are used. As a result, there is no single volume setting that is
appropriate for everyone or for every combination of sound,
settings and equipment.
You should follow some commonsense recommendations when
using any portable audio device:
• Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
• When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear
what you are listening to.
• Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, use
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
• Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.
r560.book Page 142 Tuesday, June 16, 2009 1:04 PM
• Avoid using headphones after exposure to extremely loud noises, such
as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
• Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech or experience
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
You can obtain additional information on this subject from the
following sources:
National Institute on Deafness and Other Communication
Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Email: nidcdinfo@nih.gov
Internet: http://www.nidcd.nih.gov/
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Email: info@audiology.org
Internet: http://www.audiology.org
Health and Safety Information
142
r560.book Page 143 Tuesday, June 16, 2009 1:04 PM
National Institute for Occupational Safety and Health
(NIOSH)
395 E Street, S.W.
Suite 9200
Patriots Plaza Building
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4647)
1-800-CDC-INFO (1-800-232-4636)
Outside the U.S. 513-533-8328
Email: cdcinfo@cdc.gov
Internet: http://www.cdc.gov
1-888-232-6348 TTY
Internet: http://www.cdc.gov/niosh/topics/noise/
default.html
Operating Environment
Remember to follow any special regulations in force in any area
and always switch your phone off whenever it is forbidden to use
it, or when it may cause interference or danger.
143
When connecting the phone or any accessory to another device,
read its user's guide for detailed safety instructions. Do not
connect incompatible products.
As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating position
(held to your ear with the antenna pointing over your shoulder if
you are using an external antenna).
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
phone. Consult the manufacturer to discuss alternatives.
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained
between a handheld wireless phone and an implantable medical
device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
Persons who have such devices:
• Should ALWAYS keep the phone more than six (6) inches from their
implantable medical device when the phone is turned ON;
• Should not carry the phone in a breast pocket;
r560.book Page 144 Tuesday, June 16, 2009 1:04 PM
• Should use the ear opposite the implantable medical device to
minimize the potential for interference;
• Should turn the phone OFF immediately if there is any reason to
suspect that interference is taking place;
• Should read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
your wireless phone with such a device, consult your health care
provider.
For more information see:
http://www.fcc.gov/oet/rfsafety/rf-faqs.html
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.
The wireless telephone industry has developed a rating system
for wireless phones, to assist hearing device users find phones
that may be compatible with their hearing devices. Not all phones
have been rated. Phones that are rated have the rating on their
box or a label located on the box.
The ratings are not guarantees. Results will vary depending on
the user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your personal
needs.
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the
exception of wireless phones under the Hearing Aid Compatibility
Act of 1988 (HAC Act) to require digital wireless phones be
compatible with hearing-aids.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and
are likely to generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of the two
ratings.
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are
likely to generate less interference to hearing devices than
phones that are not labeled. T4 is the better/higher of the two
ratings.
While some wireless phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a
buzzing, humming, or whining noise. Some hearing devices are
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find
this rating. Higher ratings mean that the hearing device is
Health and Safety Information
144
r560.book Page 145 Tuesday, June 16, 2009 1:04 PM
relatively immune to interference noise. The hearing aid and
wireless phone rating values are then added together. A sum of 5
is considered acceptable for normal use. A sum of 6 is
considered for best use.
M3
+
M2
=
5
T3
+
T2
=
5
In the above example, if a hearing aid meets the M2 level rating
and the wireless phone meets the M3 level rating, the sum of the
two values equal M5. This is synonymous for T ratings. This
should provide the hearing aid user with "normal usage" while
using their hearing aid with the particular wireless phone.
"Normal usage" in this context is defined as a signal quality that
is acceptable for normal operation.
The M mark is intended to be synonymous with the U mark. The
T mark is intended to be synonymous with the UT mark. The M
and T marks are recommended by the Alliance for
Telecommunications Industries Solutions (ATIS). The U and UT
marks are referenced in Section 20.19 of the FCC Rules.
145
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your phone off in
health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require
you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
r560.book Page 146 Tuesday, June 16, 2009 1:04 PM
in such areas could cause an explosion or fire resulting in bodily
injury or even death.
networks or when certain network services and/or phone
features are in use. Check with local service providers.
Users are advised to switch the phone off while at a refueling
point (service station). Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants or where blasting
operations are in progress.
To make an emergency call:
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as userprogrammed functions, which cannot guarantee connection in all
conditions. Therefore, you should never rely solely on any
wireless phone for essential communications (medical
emergencies, for example).
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
1.
If the phone is not on, switch it on.
2.
Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.
3.
Press the
key.
If certain features are in use (call barring, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult this document and your local cellular
service provider.
When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember that
your phone may be the only means of communication at the
scene of an accident; do not cut off the call until given
permission to do so.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play
with it because they could hurt themselves and others, damage
the phone or make calls that increase your phone bill.
Health and Safety Information
146
r560.book Page 147 Tuesday, June 16, 2009 1:04 PM
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to
stop using the phone if such interference cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection Standard
(NFPA-58). For a copy of this standard, contact the National Fire
Protection Association:
NFPA (National Fire Protection Agency)
1 Batterymarch Park
Quincy, Massachusetts
USA 02169-7471
Internet: http://www.nfpa.org
Cautions
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this equipment.
Only use approved batteries, antennas and chargers. The use of
any unauthorized accessories may be dangerous and void the
147
phone warranty if said accessories cause damage or a defect to
the phone.
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending
or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the phone
in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty applicable to the device.
• Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive materials in
the same compartment as the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both installed
or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
• Switch your phone off before boarding an aircraft. The use of wireless
phone in aircraft is illegal and may be dangerous to the aircraft's
operation.
• Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.
r560.book Page 148 Tuesday, June 16, 2009 1:04 PM
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the
signal strength in your area. Your phone informs you of the
current signal strength by displaying a number of bars next to the
signal strength icon. The more bars displayed, the stronger the
signal.
If you're inside a building, being near a window may give you
better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after searching, a Power
Save feature is automatically activated. If your phone is active, it
periodically rechecks service availability or you can check it
yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays
on the screen. When a signal is found, your phone returns to
standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's
turned on, it receives and transmits radio frequency (RF) signals.
When you use your phone, the system handling your call controls
the power level. This power can range from 0.006 watts to 0.2
watts in digital mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized personnel should
service your phone and accessories. Faulty service may void the
warranty.
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
• To ensure that the Hearing Aid Compatibility rating for your phone is
maintained, secondary transmitters such as Bluetooth and WLAN
components must be disabled during a call. For more information,
refer to the “Disabling Bluetooth or WLAN” section.
• If your phone is equipped with an external antenna, hold the phone
with the antenna raised, fully-extended and over your shoulder.
• Do not hold, bend or twist the phone's antenna, if applicable.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing the
internal antenna could inhibit call performance.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid spills. If
your phone does get wet, immediately turn the power off and remove
the battery. If it is inoperable, call Customer Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may
require additional subscription and/or usage charges. Not all
Health and Safety Information
148
r560.book Page 149 Tuesday, June 16, 2009 1:04 PM
features are available for purchase or use in all areas.
Downloadable Ring Tones may be available at an additional cost.
Other conditions and restrictions may apply. See your service
provider for additional information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone usage
patterns and conditions. Battery power consumption depends on
factors such as network configuration, signal strength, operating
temperature, features selected, frequency of calls, and voice,
data, and other application usage patterns.
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and battery. If you
suspect damage to the phone or battery, take it to a service center for
inspection.
• Never use any charger or battery that is damaged in any way.
• Do not modify or remanufacture the battery as this could result in
serious safety hazards.
• If you use the phone near the network's base station, it uses less
power; talk and standby time are greatly affected by the signal
strength on the cellular network and the parameters set by the
network operator.
• Follow battery usage, storage and charging guidelines found in the
user’s guide.
149
• Battery charging time depends on the remaining battery charge and
the type of battery and charger used. The battery can be charged and
discharged hundreds of times, but it will gradually wear out. When the
operation time (talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
• If left unused, a fully charged battery will discharge itself over time.
• Use only Samsung-approved batteries and recharge your battery only
with Samsung-approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave the battery
connected to a charger for more than a week, since overcharging may
shorten its life.
• Do not use incompatible cell phone batteries and chargers. Some Web
sites and second-hand dealers, not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier recommended products and accessories. If
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
• Misuse or use of incompatible phones, batteries, and charging devices
could result in damage to the equipment and a possible risk of fire,
explosion, leakage, or other serious hazard.
• Extreme temperatures will affect the charging capacity of your battery:
it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity and
r560.book Page 150 Tuesday, June 16, 2009 1:04 PM
lifetime of the battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery may temporarily not
work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below
0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as on or
near a cooking surface, cooking appliance, iron, or radiator.
• Do not get your phone or battery wet. Even though they will dry and
appear to operate normally, the circuitry could slowly corrode and
pose a safety hazard.
• Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object (coin, clip or pen) causes a direct connection
between the + and - terminals of the battery (metal strips on the
battery), for example when you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may damage the battery or the
object causing the short-circuiting.
• Do not permit a battery out of the phone to come in contact with metal
objects, such as coins, keys or jewelry.
• Do not crush, puncture or put a high degree of pressure on the battery
as this can cause an internal short-circuit, resulting in overheating.
• Dispose of used batteries in accordance with local regulations. In some
areas, the disposal of batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion batteries, contact your
nearest Samsung authorized service center. Always recycle. Do not
dispose of batteries in a fire.
Care and Maintenance
Your phone is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will help
you fulfill any warranty obligations and allow you to enjoy this
product for many years.
• Keep the phone and all its parts and accessories out of the reach of
small children.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an electric
shock to you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its moving parts
may be damaged.
• Do not store the phone in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt certain
plastics.
• Do not store the phone in cold areas. When the phone warms up to its
normal operating temperature, moisture can form inside the phone,
which may damage the phone's electronic circuit boards.
• Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong detergents to
clean the phone. Wipe it with a soft cloth slightly dampened in a mild
soap-and-water solution.
Health and Safety Information
150
r560.book Page 151 Tuesday, June 16, 2009 1:04 PM
• Do not paint the phone. Paint can clog the device's moving parts and
prevent proper operation.
• Do not put the phone in or on heating devices, such as a microwave
oven, a stove or a radiator. The phone may explode when overheated.
• If your phone is equipped with an external antenna, use only the
supplied or an approved replacement antenna. Unauthorized antennas
or modified accessories may damage the phone and violate
regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there
will assist you, and if necessary, arrange for service.
151
r560.book Page 152 Tuesday, June 16, 2009 1:04 PM
Section 16: Warranty Information
Standard Limited Warranty
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants to the original purchaser ("Purchaser") that SAMSUNG's
Phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case
90 Days
Holster
90 Days
Other Phone Accessories
1 Year
What is Not Covered? This Limited Warranty is conditioned upon
proper use of Product by Purchaser. This Limited Warranty does
not cover: (a) defects or damage resulting from accident, misuse,
abuse, neglect, unusual physical, electrical or electromechanical
stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number
removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged due to
normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral
equipment not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance, and
service of Product, or (g) Product used or purchased outside the
United States or Canada.
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery has
been charged by a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the seals on the
battery are broken or show evidence of tampering, or (iii) the
battery has been used in equipment other than the SAMSUNG
phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component
part of Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone service
Warranty Information
152
r560.book Page 153 Tuesday, June 16, 2009 1:04 PM
facility in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof of sale
showing the date of purchase, the serial number of Product and
the sellers' name and address. To obtain assistance on where to
deliver the Product, call Samsung Customer Care at 1-888-9874357. Upon receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases,
pouches and holsters will be warranted for a period of ninety (90)
days. All other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited Warranty on
the original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment shall
become the property of SAMSUNG.
If SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
153
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
• WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE
r560.book Page 154 Tuesday, June 16, 2009 1:04 PM
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing
reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make additional
warranties binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation, whether
oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
Warranty Information
154
r560.book Page 155 Tuesday, June 16, 2009 1:04 PM
End User License Agreement for Software
IMPORTANT. READ CAREFULLY: This End User License Agreement
("EULA") is a legal agreement between you (either an individual
or a single entity) and Samsung Electronics Co., Ltd. for software
owned by Samsung Electronics Co., Ltd. and its affiliated
companies and its third party suppliers and licensors that
accompanies this EULA, which includes computer software and
may include associated media, printed materials, "online" or
electronic documentation ("Software"). BY CLICKING THE "I
ACCEPT" BUTTON (OR IF YOU BYPASS OR OTHERWISE DISABLE
THE "I ACCEPT", AND STILL INSTALL, COPY, DOWNLOAD,
ACCESS OR OTHERWISE USE THE SOFTWARE), YOU AGREE TO
BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT
ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE
"DECLINE" BUTTON, DISCONTINUE USE OF THE SOFTWARE.
1. GRANT OF LICENSE. Samsung grants you the following rights
provided that you comply with all terms and conditions of this
EULA: You may install, use, access, display and run one copy of
the Software on the local hard disk(s) or other permanent storage
media of one computer and use the Software on a single
computer or a mobile device at a time, and you may not make
the Software available over a network where it could be used by
multiple computers at the same time. You may make one copy of
the Software in machine-readable form for backup purposes
155
only; provided that the backup copy must include all copyright or
other proprietary notices contained on the original.
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves
all rights not expressly granted to you in this EULA. The Software
is protected by copyright and other intellectual property laws and
treaties. Samsung or its suppliers own the title, copyright and
other intellectual property rights in the Software. The Software is
licensed, not sold.
3. LIMITATIONS ON END USER RIGHTS. You may not reverse
engineer, decompile, disassemble, or otherwise attempt to
discover the source code or algorithms of, the Software (except
and only to the extent that such activity is expressly permitted by
applicable law notwithstanding this limitation), or modify, or
disable any features of, the Software, or create derivative works
based on the Software. You may not rent, lease, lend, sublicense
or provide commercial hosting services with the Software.
4. CONSENT TO USE OF DATA. You agree that Samsung and its
affiliates may collect and use technical information gathered as
part of the product support services related to the Software
provided to you, if any, related to the Software. Samsung may
use this information solely to improve its products or to provide
customized services or technologies to you and will not disclose
this information in a form that personally identifies you.
r560.book Page 156 Tuesday, June 16, 2009 1:04 PM
5. UPGRADES. This EULA applies to updates, supplements and
add-on components (if any) of the Software that Samsung may
provide to you or make available to you after the date you obtain
your initial copy of the Software, unless we provide other terms
along with such upgrade. To use Software identified as an
upgrade, you must first be licensed for the Software identified by
Samsung as eligible for the upgrade. After upgrading, you may
no longer use the Software that formed the basis for your
upgrade eligibility.
6. SOFTWARE TRANSFER. You may not transfer this EULA or the
rights to the Software granted herein to any third party unless it
is in connection with the sale of the mobile device which the
Software accompanied. In such event, the transfer must include
all of the Software (including all component parts, the media and
printed materials, any upgrades, this EULA) and you may not
retain any copies of the Software. The transfer may not be an
indirect transfer, such as a consignment. Prior to the transfer, the
end user receiving the Software must agree to all the EULA
terms.
7. EXPORT RESTRICTIONS. You acknowledge that the Software is
subject to export restrictions of various countries. You agree to
comply with all applicable international and national laws that
apply to the Software, including the U.S. Export Administration
Regulations, as well as end user, end use, and destination
restrictions issued by U.S. and other governments.
8. TERMINATION. This EULA is effective until terminated. Your
rights under this License will terminate automatically without
notice from Samsung if you fail to comply with any of the terms
and conditions of this EULA. Upon termination of this EULA, you
shall cease all use of the Software and destroy all copies, full or
partial, of the Software.
9. DISCLAIMER OF WARRANTIES. You expressly acknowledge
and agree that use of the Software is at your sole risk and that
the entire risk as to satisfactory quality, performance, accuracy
and effort is with you. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS" AND
WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND
SAMSUNG AND ITS LICENSORS (COLLECTIVELY REFERRED TO AS
"SAMSUNG" FOR THE PURPOSES OF SECTIONS 9, 10 and 11)
HEREBY DISCLAIM ALL WARRANTIES AND CONDITIONS WITH
RESPECT TO THE SOFTWARE, EITHER EXPRESS, IMPLIED OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, OF
SATISFACTORY QUALITY OR WORKMANLIKE EFFORT, OF FITNESS
FOR A PARTICULAR PURPOSE, OF RELIABILITY OR AVAILABILITY,
OF ACCURACY, OF LACK OF VIRUSES, OF QUIET ENJOYMENT,
AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SAMSUNG
DOES NOT WARRANT AGAINST INTERFERENCE WITH YOUR
ENJOYMENT OF THE SOFTWARE, THAT THE FUNCTIONS
CONTAINED IN THE SOFTWARE WILL MEET YOUR
Warranty Information
156
r560.book Page 157 Tuesday, June 16, 2009 1:04 PM
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL
BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE
SOFTWARE WILL BE CORRECTED. NO ORAL OR WRITTEN
INFORMATION OR ADVICE GIVEN BY SAMSUNG OR A SAMSUNG
AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY.
SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE
ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON
APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THESE
EXCLUSIONS AND LIMITATIONS MAY NOT APPLY TO YOU.
10. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN
OTHER DAMAGES. TO THE EXTENT NOT PROHIBITED BY LAW, IN
NO EVENT SHALL SAMSUNG BE LIABLE FOR PERSONAL INJURY,
OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES WHATSOEVER, OR FOR LOSS OF PROFITS, LOSS OF
DATA, BUSINESS INTERRUPTION, OR FOR ANY PECUNIARY
DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO YOUR
USE OR INABILITY TO USE THE SOFTWARE, THE PROVISION OF
OR FAILURE TO PROVIDE SUPPORT OR OTHER SERVICES,
INFORMATION, SOFTWARE, AND RELATED CONTENT THROUGH
THE SOFTWARE OR OTHERWISE ARISING OUT OF THE USE OF
THE SOFTWARE, OR OTHERWISE UNDER OR IN CONNECTION
WITH ANY PROVISION OF THIS EULA, HOWEVER CAUSED,
REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT
157
OR OTHERWISE) AND EVEN IF SAMSUNG HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO
NOT ALLOW THE LIMITATION OF LIABILITY FOR PERSONAL
INJURY, OR OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THIS LIMITATION MAY NOT APPLY TO YOU.
11. LIMITATION OF LIABILITY. Notwithstanding any damages that
you might incur for any reason whatsoever (including, without
limitation, all damages referenced herein and all direct or general
damages in contract or anything else), the entire liability of
Samsung under any provision of this EULA and your exclusive
remedy hereunder shall be limited to the greater of the actual
damages you incur in reasonable reliance on the Software up to
the amount actually paid by you for the Software or US$5.00. The
foregoing limitations, exclusions and disclaimers (including
Sections 9, 10 and 11) shall apply to the maximum extent
permitted by applicable law, even if any remedy fails its essential
purpose.
12. U.S. GOVERNMENT END USERS. The Software is licensed
only with "restricted rights" and as "commercial items"
consisting of "commercial software" and "commercial software
documentation" with only those rights as are granted to all other
end users pursuant to the terms and conditions herein.
13. APPLICABLE LAW. This EULA is governed by the laws of
TEXAS, without regard to conflicts of laws principles. This EULA
r560.book Page 158 Tuesday, June 16, 2009 1:04 PM
shall not be governed by the UN Convention on Contracts for the
International Sale of Goods, the application of which is expressly
excluded. If a dispute, controversy or difference is not amicably
settled, it shall be finally resolved by arbitration in Seoul, Korea in
accordance with the Arbitration Rules of the Korean Commercial
Arbitration Board. The award of arbitration shall be final and
binding upon the parties.
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire
agreement between you and Samsung relating to the Software
and supersedes all prior or contemporaneous oral or written
communications, proposals and representations with respect to
the Software or any other subject matter covered by this EULA. If
any provision of this EULA is held to be void, invalid,
unenforceable or illegal, the other provisions shall continue in full
force and effect.
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
default settings. Please contact the Samsung Customer Care
Center for details.
Important!: Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
Important!: If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.
Phone: 1-888-987-HELP (4357)
©2009 Samsung Telecommunications
America. All rights
reserved.
Warranty Information
158
r560.book Page 159 Tuesday, June 16, 2009 1:04 PM
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.
159
r560.book Page 160 Tuesday, June 16, 2009 1:04 PM
Index
Numerics
2-Sec Pause 42
A
Accessing Your Phone’s Settings 114
Accessing Your Phone’s Tools 100
Adding a New Contacts Entry
Dial Method 41
Menu Method 41
Adjust
Key Tone 118
Ringer Setting 19
Alarm Clock
When an Alarm Sounds 107
Alarm clock
Turn Off the Alarm 107
Alerts 118
Auto Answer 119
Auto Retry 119
B
Backlight 116
Banner 115
Battery 4
Charging 5
Low Battery Indicator 6
Removal 5
Travel Adapter 5
C
Calculator 109
Calendar
View an Event 103
Call Answer 26 118
Call Answer Mode 16
Call Block 26
Call Functions
Answering a Call 25
Making a Call 21
Call Notification Types 25
Call Settings
Auto Answer 119
Auto Retry 119
Call Answer 118
Data Settings 120
TTY Mode 119
Voice Privacy 120
,
Call Timer 29
Call Waiting 26
Caller ID 26
Calls
Call Timer 29
Data Counter 30
Erase Logs 29
Incoming 28
Missed 28
Outgoing 27
Store Numbers 31
Calls Menu 27
Camcorder
Color Effects 87
Options 86
Screen Icons 79
Taking Videos 75
Video Gallery 91
Camera
Brightness 90
Options 81
Photo Gallery 90
Save Pictures 80
160
r560.book Page 161 Tuesday, June 16, 2009 1:04 PM
Screen Icons 77
Shooting Mode 81
Taking Pictures 75
Camera Mode 19
Camera Options
Size 81
Canned Message Text
Editing and Entering 66
Change Lock 122
Change Text Entry Modes 34
Clear Key 13
Contacts 38
Add Pauses 42
Adding 40
Deleting 50
Edit Name and Numbers 42
Editing 42
Erase All 124
Finding 39
Groups 47
Memory Info 51
Metro411 50
Opening 38
Saving Call Numbers 45
Speed Dial 46
161
Create Messages 53
D
Data Counter 30
Data Settings 120
Data, View Counters 30
Display 114
Shortcut Icon 116
Display Screen Icons 16
Display Settings
Backlight 116
Banner 115
Wallpaper 115
Draft Folder 62
Draft Messages 62
E
Edit Contacts Name and Numbers 42
Emergency 123
Emergency #s in Lock Mode 124
Emergency Numbers 123
End Key 14
Entering Text
Entering Numbers 36
Entering Symbols 37
Using T9 Mode 35
Erase All Entry 124
Erase Logs 29
Erase Messages 65
Exit metroWeb 68
G
Gallery
Image 94
Gallery, photo 90
Gallery, video 91
General Message Settings 66
Getting Started
Activating Your Phone 6
Understanding this User Manual 4
Voicemail 7
Go Back One Menu 32
GPS Setting 114
H
HAC 144
Hardware Version, Viewing 131
Health and Safety Information 132
I
Icon Glossary 131
Icons
Number Type 41 45 46
Ignore Calls 26
Inbox Folder 60
, ,
r560.book Page 162 Tuesday, June 16, 2009 1:04 PM
Incoming Calls 25
Incoming Calls Menu 28
Input Mode 17
L
Language 121
Left Soft Key 13
Lock Code, Changing 122
Lock Mode 17
Lock Phone 122
M
MEID 131
Memory Card
Formatting 130
Installing 7
Management 129
Removing 8
Memory Info 128
Memory Info Settings
Card Memory 129
Phone Memory 128
Save Options 128
Memory Management 128
Message Folder
Draft Box 62
Inbox 60
Outbox 61
Voice 64
Voicemail 64
Message folder
outbox 61
Message Folders
Erase Messages 65
Message Settings, General 66
Messages
Creating 53
Receive in Call 54
Types of Messages 53
Messages and Lock Mode 60
Metro411 50
metroWeb
How metroWeb Keys Work 69
Launching metroWeb 68
Using Links 69
Using metroWeb 69
microSD
Installing 7
Removing 8
Missed Calls Menu 28
Mobile Shop
Shopping and Downloading 52
Mode
Call Answer 16
Camera 19
Input 17
Lock 17
Silent 19
Standby 18
Talk 18
Vibrate 19
M-Ratings 144
Msg Setting Sub Menu 66
N
Navigation Key 14
Navigation Key Shortcuts 33
Notes and Tips 4
Notes, Description 4
Number Type Icons 41 45 46
, ,
O
OK Key 13
Outbox Folder 61
Outbox, Reviewing Messages 61
Outgoing 27
,
P
Pause Dial 22 43
Pauses, Adding 42
162
r560.book Page 163 Tuesday, June 16, 2009 1:04 PM
Phone Info
Icon Glossary 131
MEID 131
Phone Number 130
Phone Number 130
Phone Safety 143
Phone Settings
Airplane Mode 121
Language 121
NAM Selection 125
Quick Search 127
Security 122
Set Time 126
System Select 126
Photos
Sending 92
Taking Multi Shot Pictures 76
Taking Snap Shots 75
Picture Message Settings 67
Picture Messages
Online Viewing 58
Receiving 58
Send in Camera Mode 54
Q
QWERTY Keypad 34
163
R
Receive Messages in Call 54
Receive Picture Messages 58
Receive Text Messages 54
Reset Your Phone 124
Restriction 125
Return to Last Menu 32
Reviewing Outbox 61
Right Soft Key 13
Ringer Type 117
S
SAR values 132
Save a Number After a Call 45
Save Pictures 80
Screen Layouts 77
Security Settings
Change Lock 122
Emergency # 123
Erase All Entries 124
Lock Phone 122
Reset Phone 124
Restriction 125
Security Sub Menu 122
Send Key 14
Settings
Auto Answer 119
Auto Retry 119
Backlight 116
Banner 115
Call Answer 118
Data Settings 120
Display, Shortcut Icon 116
Language 121
Location Setting 114
Memory Info 128
Ringer Type 117
TTY Mode 119
Voice Privacy 120
Volume 117
Wallpaper 115
Settings Menu
Accessing 114
Settings, Picture Messages 67
Settings, Text Messages 67
Shortcut Icon 116
Shortcut to Menus 32
Silence Ringer 26
Silent Mode
Entering 19
Exiting 19
r560.book Page 164 Tuesday, June 16, 2009 1:04 PM
Software Version, Viewing 131
Sound Settings
Ringer Type 117
Volume 117
Standard Limited Warranty 152
Standby Mode 18
Store Emergency #s 123
Store Numbers After a Call 45
T
Taking pictures and videos 75
Talk Mode 18
Text Conventions 4
Text Entry Mode 34
Changing 34
Text Message Settings 67
Text Messages, Receiving 54
Text Modes
Changing 34
Three-Way Calling 21
Timer, Calls 29
Tip, Description 4
Tools
Add New Event 104
Alarm Clock 106
Calculator 109
Calendar 103
Memo Pad 105
World Time 107
Tools Menu
Accessing 100
T-Ratings 144
TTY Mode 119
Open View of Your Phone 11
Using Abc Mode 36
V
U
UL Certification 133
Understanding Your Contacts
Adding a New Contacts Entry 40
Contacts Groups 47
Deleting a Contacts Entry 50
Editing an Existing Contacts
Entry 42
Finding a Contacts Entry 39
Memory Info 51
Metro411 50
Save a Number After a Call 45
Speed Dial 46
Understanding Your Phone
Closed View of Your Phone 9
Command Keys 13
Display Screen 14
Features of Your Phone 9
Version 131
Vibrate Mode 19
View an Event, Calendar 103
Voice Privacy 120
Voice Setting
About VoiceSignal 74
Choice Lists 71
Sensitivity 72
Sound 73
Voice Launch 74
Voicemail
Checking 64
Folder 64
Listening to 7
Volume 117
W
Wait 42
Wallpaper 115
Warranty Information 152
World Time 107
164
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Page Mode : UseOutlines XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2009:06:16 13:03:26Z Creator Tool : FrameMaker 8.0 Modify Date : 2009:07:16 09:28:06-05:00 Metadata Date : 2009:07:16 09:28:06-05:00 Format : application/pdf Creator : churtig Title : r560.book Producer : Acrobat Distiller 8.1.0 (Windows) Enhanced : By PDF Enhancer 3.1/Win Spdf : 1112 Document ID : uuid:04c05c32-323e-4e2a-ac1f-55665442a0e9 Instance ID : uuid:a20f10f7-5e48-4641-af04-6f32d4b7be8c Page Count : 167 Page Layout : SinglePage Author : churtig SPDF : 1112EXIF Metadata provided by EXIF.tools