Samsung Ps42P3S Users Manual D60A_ENG_asia_all_remote
PS-50P3H 20030716152039656_D60A_ENG_asia_all_0522 Samsung PS-50P3H user manual - English(Euro) (ver.1.0) - ENGLISH (EUROPE)
PS-42P3S/HAC 20040426224448671_BN68-00481A-00Eng Samsung PS-42P3S/HAC user manual - QSG (Quick Guide) - ENGLISH (ALL OVER THE WORLD)
PS63P3H to the manual 8e89bdbe-28e0-4ebc-97eb-c84be900b378
2015-01-23
: Samsung Samsung-Ps42P3S-Users-Manual-279529 samsung-ps42p3s-users-manual-279529 samsung pdf
Open the PDF directly: View PDF 
.
Page Count: 56
| Download | |
| Open PDF In Browser | View PDF |
PDP-TELEVISION (PLASMA DISPLAY PANEL) PS42P3S PS50P3H PS63P3H PS50P3H PS63P3H Owner’s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. ON-SCREEN MENUS PICTURE IN PICTURE (PIP) TELETEXT / TELEWEB (OPTION) Safety Instructions ENG ◆ Do not place the PDP on an unstable cart, stand, tripod, bracket, table, or floor where it can fall. ◆ Do not expose the PDP to extreme temperature conditions or to extreme humidity conditions. ◆ Do not expose the PDP to direct sunlight and other sources of heat. ◆ Do not expose the PDP to any liquids. ◆ Never put objects of any kind into the television, and do not place a water-containing vessel on the PDP. ◆ During a storm conditions (especially when there is lightning) unplug the PDP from the mains socket and aerial. ◆ Do not step on or twist the power cord. ◆ Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock. ◆ Please use a soft and dry cloth (not containing volatile matter) when you clean the PDP. ◆ If the PDP is broken, do not try to repair it yourself. Contact qualified service personnel. ◆ If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place. ◆ Do not drop the remote control. ◆ When installing a PDP such as for an exhibition, etc., there is risk of overheating the unit if placed directly on a floor or carpet. Be sure to use a proper stand, wall mount, ceiling mount, or Lift-Stand offered by Samsung. (Do not use and exhibit by laying down or sitting the unit directly on the floor.) User Instructions ◆ Screen Image retention Do not display a still image (such as on a video game or when hooking up a PC to this PDP) on the plasma monitor panel for more than 2 hours as it can cause screen image retention. This image retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of this screen when displaying a still image. ◆ Cell Defect The plasma display panel consists of fine cells. Although the panels are produced with more than 99.9 percent active cells, there may be some cells that do not produce light or remain lit. ◆ Height The PDP can normally operate only under 2000m in height. It might abnormally function at a place over 2000m in height and do not install and operate there. ◆ Warranty - Warranty Period: Two years starting from the purchase of your PDP. - Warranty does not cover any damage caused by image retention. - Burn-in is not covered by the warranty. 2 Caution ENG The lightning flash and arrow head within the triangle is a warning sign alerting you of “dangerous voltage” inside the product. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product. CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. main voltage is indicated on the ☛ The rear of the PDP and the frequency is 50 or 60Hz. Checking Parts A Separated Sales Ferrite Cores for Speaker Wire Owner’s Instructions Component Cables Remote Control/ AAA Batteries Power Cord Speaker Wires Antenna Cable PC Cable DNIeTM (Digital Natural Image engine) This feature bring you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, much detailed image to you. DNIeTM technology will fit every signals into your eyes. 3 ENG Contents ◆ FOREWORD ■ ■ ■ Safety Instructions ......................................................................................... User Instructions............................................................................................ Caution .......................................................................................................... 2 2 3 ◆ CONNECTING AND PREPARING YOUR DISPLAY ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Your New Plasma Display Panel................................................................... Infrared Remote Control ................................................................................ IInserting the Batteries in the Remote Control............................................... Installing the Display on the Wall Attachment Panel ..................................... Connecting Speakers .................................................................................... Connecting to an Aerial or Cable Television Network ................................... Connecting a Satellite Receiver or Decoder.................................................. Switching On and Off..................................................................................... Placing in Standby Mode............................................................................... Becoming Familiar with the Remote Control ................................................. Setting Up Your Remote Control ................................................................... Plug & Play Feature....................................................................................... Choosing Your Language.............................................................................. 6 8 9 10 12 14 14 15 15 16 17 18 19 ◆ SETTING THE CHANNELS ■ ■ ■ ■ ■ ■ Storing Channels Automatically..................................................................... Sorting the Stored Channels ......................................................................... Storing Channels Manually............................................................................ Assigning Names to Channels ...................................................................... Activating the Child Lock and Skipping Unwanted Channels ........................ Selecting a Channel by Information............................................................... 20 21 22 24 25 26 ◆ USING YOUR DISPLAY (continued) ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 4 Changing the Picture Standard ..................................................................... Adjusting the Picture Settings........................................................................ Adjusting the Picture Settings (PC or DVI Mode) .......................................... Setting the Picture (PC Mode)....................................................................... Setting the Picture (Component Mode) ......................................................... Extra Picture Settings .................................................................................... - Digital NR - Size - LNA (Low Noise Amplifier) Setting the Blue Screen................................................................................. Selecting the Film Mode (Video or S-Video Mode) ....................................... DNIeTM (Digital Natural Image engine) ............................................... Freezing the Current Picture ......................................................................... 26 27 28 29 30 31 32 32 33 33 ENG Contents (continued) ◆ USING YOUR DISPLAY ■ ■ ■ ■ ■ ■ ■ ■ Changing the Sound Standard ...................................................................... Adjusting the Sound Settings ........................................................................ Extra Sound Settings..................................................................................... - Auto Volume - Melody - Pseudo Stereo / Virtual Surround Selecting the DUAL Mode (depending on the model) ................................... Setting the Time and Switching the TV On/Off Automatically ....................... Setting the Sleep Timer ................................................................................. Viewing the Picture In Picture (PIP) .............................................................. Listening to the Sound of the Sub Picture (PC or DVI Mode)........................ 34 34 35 36 37 38 39 41 ◆ USING THE TELETEXT FEATURE ■ ■ ■ ■ ■ Teletext Feature ............................................................................................ Displaying the Teletext Information ............................................................... Selecting Display Options.............................................................................. Selecting the Teletext Source (Option).......................................................... Selecting a Teletext Page.............................................................................. 42 43 43 44 45 ◆ USING THE TELEWEB FEATURE ■ ■ ■ TeleWeb Feature (Option)............................................................................. Using the TeleWeb Menu after Displaying the TeleWeb............................... Easy Accessing the TeleWeb Service via the Remote Control ..................... 46 47 48 ◆ ADDITIONAL INFORMATION AND CONNECTIONS ■ ■ ■ ■ ■ ■ ■ ■ ■ Viewing Pictures From External Sources ...................................................... Connecting to the External Devices .............................................................. Connecting to the DVD Input......................................................................... Connecting to the S-Video Input.................................................................... Connecting to the DVI Input .......................................................................... Connecting to the PC Input ........................................................................... Setting up Your PC Software (Windows only) ............................................... Input Mode (PC/DVI) ..................................................................................... Pin Configurations ......................................................................................... 48 49 50 50 51 51 52 53 54 ◆ RECOMMENDATIONS FOR USE ■ Troubleshooting: Before Contacting Service Personnel................................ Symbols Press ☛ ➢ Important Note 5 55 Your New Plasma Display Panel ➢ ENG The actual configuration on your PDP may be different, depending on your model. Front Panel PS42P3S/PS50P3H a b c Speaker Speaker PS63P3H a a b c b Power Indicator SOURCE - Power Off; Red - Power On; Off - Timer On; Green External input selection. MENU Menu display. - VOL + Volume adjustment. ▼ CH ▲ Channel selection. I/ Press to turn the PDP on and off. 6 c Remote Control Signal Receiver Aim the remote control towards this spot on the PDP. Your New Plasma Display Panel (continued) ➢ The actual configuration on your PDP may be different, depending on your model. ENG Rear Panel ➢ a For further details about connection, refer to pages 48~50. b c d e f a) ONLY FOR SERVICE Connector for service only. g h j i k g) COMPONENT IN Inputs for external devices, such as DVD, video game device or video disc players. b) DVI IN Connect to the video output jack for device with DVI output. c) AUDIO Connect to the audio output jack on your PC or any device with DVI output. h) EXT SPEAKER (8Ω) Connect external speakers. i) ANT IN VHF/UHF 75Ω Coaxial connector for Aerial/Cable Network. j) WOOFER OUT d) PC IN (RGB IN) Connect to the sub-woofer speaker jack. Connect to the video output jack on your PC. k) POWER IN e) MONITOR OUT (VIDEO / L-AUDIO-R) Connect the supplied power cord. Outputs for external devices f) S-VIDEO IN / L-AUDIO-R / VIDEO IN Video and audio inputs for external devices with an S-Video output, such as a camcorder or VCR. 7 Infrared Remote Control ENG TURNS THE PDP ON AND OFF PRESS TO SELECT A PRESE TIME INTERVAL FOR AUTOMATIC SHUTOFF PICTURE SIZE WHEN YOU PRESS A BUTTON , ‘ ’ APPEARS ALONG WITH SELECED MODE (TV, VCR, CATV, DVD OR STB) AND REMAINING BATTERIES ON LED MAKE THE REMOTE CONTROL WORKS FOR TV, VCR, CATV, DVD PLAYER, STB DIRECT CHANNEL SELECTION TUNES TO THE PREVIOUS CHANNEL SELECT CHANNEL BY INFORMATION VOLUME INCREASE TEMPORARY SOUND SWITCH-OFF NEXT CHANNEL/ TELETEXT NEXT PAGE/ TELEWEB FORWARD EXTERNAL INPUT SELECTION/ TELETEXT SIZE SELECTION VOLUME DECREASE PICTURE EFFECT SELECTION/ TELETEXT CANCEL PREVIOUS CHANNEL/ TELETEXT PREVIOUS PAGE/ TELEWEB BACKWARD INFORMATION DISPLAY/ TELETEXT REVEAL EXIT FROM ANY DISPLAY MENU DISPLAY/ TELETEXT INDEX MOVE TO THE REQUIRED MENU OPTION/ ADJUST AN OPTION VALUE RESPECTIVELY PICTURE STILL DNIe ON/OFF/DEMO FASTEXT TOPIC SELECTION TELETEXT ON VIDEO & TEXT MIX TELETEXT OFF (Refer to page 43 for details) TELEWEB DISPLAY (OPTION) IF YOUR REMOTE CONTROL IS NOT FUNCTIONING PROPERLY, TAKE OUT THE BATTERIES AND PRESS THE RESET BUTTON FOR ABOUT 2~3 SECONDS. RE-INSERT THE BATTERIES AND TRY USING THE REMOTE CONTROL AGAIN. ➢ 8 CONFIRM YOUR CHOICE (STORE OR ENTER) CHANNEL SCAN SOUND MODE SELECTION TELEWEB HOME PAGE/ TELETEXT SUBPAGE PIP FUNCTIONS; - PIP ACTIVATING OR DEACTIVATING (PIP ON) - USED TO MOVE THE SUB PICTURE COUNTERCLOCKWISE (LOCATE) - USED TO ASSIGN A SOURCE OF SUB PICTURE (SOURCE) - SELECTING THE CHANNEL OF SUB PICTURE (P^/∨) VCR/DVD FUNCTIONS; - REWIND (REW) - STOP - PLAY/PAUSE - FAST FORWARD (FF) The performance of the remote control may be affected by bright light. Inserting the Batteries in the Remote Control ENG You must insert or replace the batteries in the remote control when you: ◆ Purchase the PDP ◆ Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol ( ) downwards and then pulling firmly to remove it. 2 Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking care to respect the polarities: ◆ - on the battery against - on the remote control ◆ + on the battery against + on the remote control 3 Replace the cover by aligning it with the base of the remote control and pressing it back into place. 9 Installing the Display on the Wall Attachment Panel ENG ☛ This wall mount bracket installation guide is for the following models: WMN4230/WMN5030/WMN6330. This installation guide may be different from the PDP User’s manual. Please refer to the proper installation guide for your product. Installation Notes ◆ Do not install the PDP on any place other than vertical walls. ◆ To protect the performance of the PDP and prevent troubles, avoid the followings: - Do not install next to smoke and fire detectors. - Do not install in an area subjected to vibration or high voltage. - Do not install near or around any heating apparatus. ◆ Use only recommended parts and components. Mounting Kits Wall Mount Bracket PS42P3S/50P3H Plastic Hanger PS63P3H Screws PS42P3S/50P3H: 4 PS63P3H: 6 How to Adjust Mounting Angle (depending on your model) The wall mount bracket is delivered separately. Please tighten the captive screw in the direction of the arrow after assembling the bracket. 10 1 Secure the PDP to the wall mount bracket. (Please refer to the following instructions.) 2 Set the angle by pulling the upper end of the PDP attached to bracket in the direction of the arrow. 3 The angle can be adjusted from 0° to 20° by ±2°. Installing the Display on the Wall Attachment Panel ENG 1 Remove the screws from the back of the PDP. PS42P3S 2 ◆ Please ask the installers to install the wall mount bracket. ◆ Please be sure to check if the plastic hanger is completely secured on both the left and right side after hanging the PDP on the wall mount bracket. ◆ Please avoid catching your fingers while installing and adjusting the angle. ◆ Please tightly secure the wall mount bracket to the wall to avoid injury from a falling PDP. Tighten the screws of the plastic hanger to the back side of the PDP. PS42P3S 4 PS63P3H Use the screws and assemble the plastic hanger. ☛ 3 PS50P3H PS50P3H PS63P3H Put the 4 pegs on the PDP in the grooves of the wall mount bracket and pull down on the PDP (!) to secure it to the wall mount bracket (@). Tighten the screws as shown (#) so that the PDP cannot be separated from wall mount bracket. PDP panel Wall Wall attachment panel bracket 11 Connecting Speakers ENG 1 Remove the screws on the rear of the PDP. PS42P3S PS50P3H PS63P3H 2 Hang the two “T” shaped hangers on the square holes on the rear of the PDP. 3 Tighten the PDP and the speaker bracket using the screws removed from the PDP. PS42P3S ➢ PS42P3S PS50P3H PS50P3H PS63P3H PS63P3H When moving your PDP, do NOT hold the speaker connected to your PDP. It may damage the bracket clamping the speaker and your PDP together and result in a drop of your PDP and a risk of personal damage and injury. 12 Connecting Speakers (continued) ENG Connect the speaker audio cable to the external speaker output jack on the rear of the PDP matching the “+” and “-” ends of the cable with the diagram on the PDP. Sub-woofer speaker PS42P3S/PS50P3H ➢ ◆ The speakers MUST have to a power handling capability of 10 watts minimum (impedance 8Ω). ◆ When you connect the speaker wire to the external speaker out connector, first bind the speaker wire round the ferrite core to secure it. Sub-woofer speaker PS63P3H Ferrite Cores The ferrite cores are used to attenuate undesired signals. When connecting cables, attach one of these ferrite cores to the cable near the connector. 13 Connecting to an Aerial or Cable Television Network ENG To view television channels correctly, a signal must be received by the set from one of the following sources: ◆ An outdoor aerial ◆ A cable television network ◆ A satellite network 1 In the first three cases, connect the aerial or network input cable to the 75Ω coaxial socket on the rear of the PDP. 2 If you are using an indoor aerial, you may need to turn it when tuning your PDP until you obtain a picture that is both sharp and clear. For further details, refer to: ◆ “Storing Channels Automatically” on page 20 ◆ “Storing Channels Manually” on page 22 Rear of the PDP or Cable Television Network ➢ When installing or re-installing your PDP, be sure to use the supplied coaxial antenna cable. If you connect using a different coaxial cable, there is risk of noise or interference to the screen image. (You must not use another general purpose cable. Use the 3M/5M/7M cable supplied by Samsung.) Connecting a Satellite Receiver or Decoder Rear of the PDP In order to watch television programmes broadcast via a satellite network, you must connect a satellite receiver to the rear of the PDP. Also, in order to descramble a coded transmission signal, you must connect a decoder to the rear of the PDP. Using a Coaxial cable Connect a coaxial cable to the: ◆ Receiver (or Decoder) output socket. ◆ Television aerial input socket. ➢ If you wish to connect both a satellite receiver (or decoder) and a VCR, you should connect the: ◆ Receiver (or Decoder) to the VCR ◆ VCR to the PDP Otherwise, connect the receiver (or decoder) directly to the PDP. Satellite receiver/ Decoder 14 Switching On and Off ENG The mains lead is attached to the rear of your PDP. 1 Result: ➢ 2 Front of the PDP Plug the mains lead into an appropriate socket. The Standby indicator on the front of the PDP lights up. The main voltage is indicated on the rear of the PDP and the frequency is 50 or 60Hz. Press the “ I / ” button on the front of the PDP (or POWER ( button on the remote control) to switch the PDP on. Result: ) The programme that you were watching last is reselected automatically. you have not yet stored any channels, No clear picture ➣ Ifappears. Refer to “Storing Channels Automatically” on page 20 or “Storing Channels Manually” on page 22. 3 To switch your PDP off, press the “ I / TV ” button again. Placing in Standby Mode Your PDP can be placed in Standby mode, in order to reduce the Power consumption. The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example). 1 Press the POWER ( Result: 2 TV ) button on the remote control. The screen is turned off and the Standby indicator on the front of the PDP lights. To switch the PDP back on, simply press the POWER ( again or a numeric button. ➣ You can also switch on by pressing the P or ) button button. 15 Becoming Familiar with the Remote Control ENG The remote control is used mainly to: ◆ Change channels and adjust the volume ◆ Display the on-screen menu system The following table presents the most frequently used buttons and their functions. Button to PRE-CH Menu Function Used to display the next stored channel. - Used to display the previous stored channel. - Used to display the corresponding channels. For double digit channels, the second digit must be pushed immediately after the first. Failure to do this will result in a single digit channel being displayed. ➢ Press the PRE-CH button. The TV will switch to the last channel viewed. To quickly switch between two channels that are far apart, tune to one channel, then use the number button to select second channel. Then, use the PRE-CH button to quickly alternate between them. Used to increase the volume. - Used to decrease the volume. - MUTE Used to switch the sound off temporarily. To turn the sound back on, press this button again, or press the or button. MENU Used to display the on-screen menu system. Used to return to the previous menu or normal viewing. - Used to: ◆ Display a submenu containing selections for the current menu option ◆ Increase/decrease a menu option value - Used to confirm your choice. - Used to exit from the menu system and return to normal viewing directly. EXIT 16 Viewing Function ➣ Setting Up Your Remote Control ENG This TV’s remote control can operate VCR, CATV , DVD, or Set-top box (STB), in addition to controlling the TV. ➣ The remote control is not compatible with the TV manufactured by another company. 1 Turn off your VCR, Cable box (CATV), DVD or STB. 2 Press the SELECT button. Mode is changed whenever SELECT button is pressed. (new mode is displayed on LED screen.) 3 Press the POWER ( ) button on the remote control. The component you select should turn on. If it turns on, your remote control is now set correctly. 4 Once your remote control is set up, press the SELECT button any time you want to use the remote control to operate your VCR, Cable box, DVD or STB. ➣ VCR When your remote control is in the VCR, CATV, DVD or STB mode, the volume buttons still control your television’s volume 17 Plug & Play Feature ENG When the television is initially powered ON, several basic customer settings proceed automatically and subsequently. The following settings are available. Plug & Play 1 Language Sel. Result: ) button The message Plug & Play is displayed. It flickers for a little while, and then the Language menu is automatically displayed. 2 Select the appropriate language by pressing the † or … button. 3 Press the Result: Store 4 Antenna input check Area If the television is in Standby mode, press the POWER ( on the remote control. button to confirm your choice. The message Antenna input check is displayed. Make sure that the antenna is connected to the TV, and then press the button. Result: The Country menu is displayed. 5 Select your country by pressing the † or … button. 6 Press the Result: Asia/W.Europe button to confirm your choice. The Auto Store menu is displayed. CIS/E.Europe 7 China Hongkong/UK To start the search, press the Result: Australia NZ/Indonesia Sel. Store ➢ button. The search will end automatically. Channels are sorted and stored in an order which reflects their position in the frequency range, (with lowest first and highest last). The programme originally selected is then displayed. To stop the search before it has finished or return to normal viewing, press the MENU ( ) button. Auto Store Area Asia/W.Europe 1% P0 ----- 57 MHz Exit Enjoy viewing your new TV. 18 8 When it has finished, the message Enjoy viewing your new TV is displayed, and then the channel which has been stored will be activated. Plug & Play Feature (continued) ENG If you want to reset this feature... 1 Press the MENU button. The main menu is displayed. Result: 2 Press the † or … button to select Function. The options available in the Function group are Result: displayed. 3 Press the √ button. 4 Press the † or … button to select Plug & Play. Press the √ button. Result: 5 The message Plug & Play is displayed. Function For further details on how to set, refer to the opposite page. Language English Time √ Teletext Source Main Plug & Play √ Blue Screen Off √ Enter Move Return Choosing Your Language When you start using your television for the first time, you must select the language which will be used for displaying menus and indications. Function Language 1 2 3 English Press the MENU button. The main menu is displayed. Result: Time √ Teletext Source Main Plug & Play √ Press the † or … button to select Function. The options available in the Function group are Result: displayed. Blue Screen Off Move Press the √ button. The Language option is selected. Result: 4 Press the √ button again. The languages available are listed. Result: 5 Select the appropriate language by pressing the † or … button. 6 Press the 7 When you are satisfied with your choice, press the MENU ( button to return to normal viewing. √ Enter Language button to confirm your choice. ) Sel. Store 19 Return Storing Channels Automatically ENG Channel Area Asia/W.Europe Auto Store √ Manual Store √ Sort √ Name √ Edit √ √ Enter Move You can scan for the frequency ranges available to you, (availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch. 1 Press the MENU button. The main menu is displayed. Result: 2 Press the † or … button to select Channel. The options available in the Channel group are Result: displayed. 3 Press the √ button. The Area option is selected. Result: 4 Press the √ button again. The countries available are listed. Result: 5 Select your area by pressing the † or … button. 6 Press the 7 Press the MENU button. The options available in the Channel group are Result: displayed again. 8 Press the † or … button to select Auto Store. Press the √ button. The Auto Store menu is displayed. Result: 9 Press the Return Area Asia/W.Europe CIS/E.Europe China Hongkong/UK Australia NZ/Indonesia Sel. Store Channel Area Asia/W.Europe Auto Store √ Manual Store √ Sort √ Name √ Edit √ Move √ Enter Return Auto Store Area Result: Asia/W.Europe 0% P0 ----- 0 MHz œ √ Sel. Exit Auto Store Area Asia/W.Europe 1% P0 ----- 57 MHz Exit 20 ➢ Start 10 button to confirm your choice button to start the search. The search will end automatically. Channels are sorted and stored in an order which reflects their position in the frequency range, (with lowest first and highest last). The programme originally selected is then displayed. To stop the search before it has finished, press the MENU ( ) button. When the channels have been stored, you can: ◆ Sort them in the order required (see page 21) ◆ Clear a channel (see page 25) ◆ Fine-tune channel reception if necessary (see page 23) ◆ Assign a name to the stored channels (see page 24) ◆ Activate/deactivate the Digital Noise Reduction feature (see page 31) Sorting the Stored Channels ENG This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using store channels. You can delete those channels you do not want to keep. 1 2 3 Press the MENU button. The main menu is displayed. Result: Press the † or … button to select Channel. The options available in the Channel group are Result: displayed. Channel Area Asia/W.Europe Auto Store √ Manual Store √ Sort √ Name √ Edit √ Press the √ button. 4 Press the † or … button to select Sort. Press the √ button. The Sort menu is displayed. Result: 5 Select the channel that you wish to move by pressing the † or … button. Press the √ button. 6 Select the number of the programme to which the channel is to be moved by pressing the † or … button. Press the √ button. The channel is moved to its new position and all other Result: channels are shifted accordingly. √ Enter Move Return Sort 96 97 98 99 0 1 2 3 4 5 6 7 8 * * * * * C23 * * * * * * * √ Sel. Move Exit Sort 7 Repeat Steps 5 to 6 until you have moved all the channels to the required programme numbers. 96 97 98 99 0 1 2 3 4 5 6 7 8 * * * * * C23 * * * * * * * œ Add Sel. 21 Storing Channels Manually ENG You can store up to television channels, including those received via cable networks. Channel Area Asia/W.Europe Auto Store √ Manual Store √ Sort √ Name √ Edit √ ◆ Whether or not to store each of the channels found ◆ The programme number of each stored channel which you wish to identify √ Enter Move When storing channels manually, you can choose: Return 1 Press the MENU button. The main menu is displayed. Result: 2 Press the † or … button to select Channel. The options available in the Channel group are Result: displayed. 3 Press the √ button. 4 Press the † or … button to select Manual Store. Press the √ button. The Manual Store menu is displayed. Result: 5 If necessary, select the broadcasting standard required. Press the † or … button to select Colour System and press the œ or √ button. The colour standards are displayed in the following order. (depending on the model). Manual Store Prog. No P 1 Colour System AUTO Sound System BG Search 891MHz Channel C 16 Fine Tune œ √ Sel. Move Store Manual Store Prog. No P 1 Colour System AUTO Sound System BG Search 891MHz Channel C 16 ◆ AUTO - PAL - SECAM 6 Fine Tune œ √ Sel. Move ◆ AUTO - NTSC3.58 - NTSC4.43 Store Press the † or … button to select Sound System and press the œ or √ button. The sound standards are displayed in the following order. BG - DK - I - M Manual Store Prog. No P 1 Colour System AUTO Sound System BG Search 891MHz Channel C 16 Fine Tune Move œ √ Sel. 22 Store Storing Channels Manually (continued) ENG 7 If you know the number of the channel to be stored, see the following steps. ◆ Press the † or … button to select Channel. Manual Store Prog. No P 1 ◆ Press the √ button. Colour System AUTO ◆ Press the † or … button to select C (Air channel) or S (Cable channel). Sound System BG Search 891MHz Channel C 16 ◆ Press the √ button. ◆ Press the numeric buttons (0~9) to select indicate the required number. Fine Tune no sound or abnormal sound, re-select the sound standard ➣ Ifrequired. 8 If you do not know the channel numbers, select the Search by pressing the † or … button. Press the √ button to start the search. Result: 9 The tuner scans the frequency range until the first channel or the channel that you selected is received on your screen. If reception is weak, you can fine tune a channel manually. Press the † or … button to select Fine Tune. Press the œ or √ button until the picture and sound are both clear and sharp. ➢ If you are unable to fine tune a channel, check that the Colour System and Sound System settings are correct. œ √ Sel. Move Store Manual Store Prog. No P 1 Colour System AUTO Sound System BG Search 891MHz Channel C 16 Fine Tune œ √ Sel. Move Store Manual Store Prog. No P 1 To assign a programme number to a channel, select the Prog. No by pressing the † or … button. Press the œ or √ button until you find the correct number. Colour System AUTO 11 To store the channel and associated programme number, press the button. Fine Tune 12 Repeat Steps 7 to 11 for each channel to be stored. 10 Sound System BG Search 891MHz Channel C 16 Move œ √ Adjust Fine Tune ☛ Channel mode ◆ P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position numbers from P00 to max P99. You can select a channel by entering the position number in this mode. Fine Tune ◆ C (Real channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode. ◆ S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode. 23 Store Assigning Names to Channels ENG Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. Channel Area Asia/W.Europe Auto Store √ Manual Store √ Sort √ Name √ Edit √ √ Enter Move * * * * * C23 * * * * * * * √ Sel. Move Press the MENU button. The main menu is displayed. Result: 2 Press the † or … button to select Channel. The options available in the Channel group are Result: displayed. 3 Press the √ button. 4 Press the † or … button to select Name. Press the √ button. The Name menu is displayed with the current channel Result: automatically is selected. Arrow indications are displayed around the name box. 5 If necessary, select the channel to be assigned a new name by pressing the † or … button. Press the √ button. 6 Press the † or … button to select a letter (A~Z), a number (0~9) or a symbol (-, space). Move on the previous or next letter by pressing the œ or √ button. 7 When you have finished entering the name, press the to confirm the name. Return Name 96 97 98 99 0 1 2 3 4 5 6 7 8 1 Exit Name 96 97 98 99 0 1 2 3 4 5 6 7 8 Sel. * * * * * C23 * * * * * * * œ √ Move 24 ABC Store button Activating the Child Lock and Skipping Unwanted Channels ENG ◆ Activating the child lock This feature allows you to lock the television so that it cannot be switched on via the front panel. It can, however, still be switched on via the remote control. Thus, by keeping the remote control away from unauthorised users, such as children, you can prevent them from watching unsuitable programme. ◆ Skipping unwanted channels You can exclude the channels of your choice from the channel scan operation. When you scan through the stored channels, those that you have chosen to skip are thus not displayed. All channels that you do not specifically choose to skip are displayed during scanning. 1 Press the MENU button. The main menu is displayed. Result: 2 Press the † or … button to select Channel. The options available in the Channel group are Result: displayed. 3 4 Press the † or … button to select Edit. Press the √ button. The Edit menu is displayed with the current channel Result: automatically is selected. Press the † or … button to select the channel to be locked. 6 Press the œ or √ button to select Child Lock. To lock the channel, select On by pressing the † or … button (to unlock the channel, select Off). Press the button to confirm. 8 Area Asia/W.Europe Auto Store √ Manual Store √ Sort √ Name √ Edit √ Move Press the † or … button to select the channel to be added or erased. Press the œ or √ button to select Add/Erase. To add or erase the channel, select Added or Erased by pressing the † or … button. Press the button to confirm. √ Enter Return Edit 96 97 98 99 0 1 2 3 4 5 6 7 8 * * * * * * * * * * * * * Child Lock Add Erase Off √ Sel. Move Press the √ button. 5 7 Channel Erased Exit Edit 96 97 98 99 0 1 2 3 4 5 6 7 8 * * * * * * * * * * * * * Child Lock Off œ √ Move Sel. Erased Store Edit 96 97 98 99 0 1 2 3 4 5 6 7 8 Sel. * * * * * * * * * * * * * Add Erase Off œ √ Move 25 Erased Store Selecting a Channel by Information ENG You can display the list of stored channels. 1 Press the CH INFO. button. Result: 2 Information 96 97 98 99 0 1 2 3 4 5 6 7 8 * * * * * * * * * * * * * To scroll through the stored channels, press the † or … button. Result: 3 A list is displayed with the first 13 channels. Two text boxes to the right of the list indicate: ◆ Whether the Teletext feature is available. ◆ Which sound mode is being used. The corresponding channel is displayed. When you are satisfied with your choice, press the MENU ( button to return to normal viewing. Mono ➢ Move ◆ External inputs can be displayed and scrolled through in the same way. Exit Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. Picture Mode œ Dynamic √ Adjust √ Colour Tone œ Normal √ Digital NR Off Size Wide LNA Off Move œ √ Sel. Return 1 Press the MENU button. The options available in the Picture group are Result: displayed. 2 Press the √ button. The Mode is selected. Result: 3 Select the option by pressing the œ or √ button. The following modes are available depending on the Result: input source. ◆ Dynamic - Standard - Movie - Custom ◆ Middle - Low - Custom - High (PC or DVI Mode) ➣ 26 You can also set these options simply by pressing the P.MODE (Picture Mode) button. ) Adjusting the Picture Settings ENG Your television has several settings which allow you to control picture quality. 1 Press the MENU button. Result: The options available in the Picture group are displayed. 2 Press the √ button. 3 Press the † or … button to select Adjust. Press the √ button. Result: 4 5 6 Mode œ Dynamic √ Adjust √ Colour Tone œ Normal √ Digital NR Off Size Wide LNA Off √ Enter Move Return The Adjust menu is displayed. Press the † or … button to select the option (Contrast, Brightness, Sharpness, Colour, Tint-NTSC (TV, VIDEO, SVIDEO) only) to be adjusted. Press the œ or √ button Result: Picture The horizontal bar is displayed. Move the horizontal bar’s cursor left or right by pressing the œ or √ button. When you are satisfied with the settings, press the store them. Adjust (Dynamic) Contrast 80 Brightness 50 Sharpness 50 Colour 50 button to œ √ Adjust Move Store Press the MENU button. Result: The options available in the Picture group are displayed again. 7 Press the † or … button to select Colour Tone. 8 Select the option by pressing the œ or √ button. The colour tones are displayed in the following order. Picture Mode œ Dynamic √ Adjust √ Colour Tone œ Normal √ Digital NR Off Size Wide LNA Off Normal - Warm1 - Warm2 - Cool2 - Cool1 Move ➣ √ Enter If you make any changes to these settings, the picture standard is automatically switched to the Custom. 27 Return Adjusting the Picture Settings (PC or DVI Mode) ➢ ENG 1 Preset to the PC or DVI mode by using the SOURCE button. Press the MENU button. Picture Result: Mode œ Middle √ Adjust √ Colour Tone œ Custom √ Colour Adjust √ 2 Press the √ button. 3 Press the † or … button to select Adjust. Press the √ button. Result: √ Enter Move Adjust (Middle) Press the † or … button to select the option (Contrast, Brightness, Sharpness) to be adjusted. Press the œ or √ button. Result: 75 Brightness 60 Sharpness 50 5 œ √ Adjust Store Picture Mode œ Middle √ Adjust √ Colour Tone œ Custom √ Colour Adjust √ œ √ Sel. Press the † or … button to select Colour Tone. 7 Select the option by pressing the œ or √ button. The colour tones are displayed in the following order. Custom (PC mode only) - Colour1 - Colour2 - Colour3 8 Press the † or … button to select Colour Adjust. Press the √ button. ➣ Return Mode œ Middle √ Adjust √ Colour Tone œ Custom √ Colour Adjust √ ◆ When select the Colour Tone to Custom, the Colour Adjust menu is displayed. 9 Press the † or … button to select the option (Red, Green, Blue) to be adjusted. Press the œ or √ button. Result: √ Enter Return Colour Adjust Red 50 Green 50 Blue 50 Move œ √ Adjust 28 The Colour Adjust menu is displayed. ◆ The Colour Adjust menu can not be selected in DVI mode. Picture Move The options available in the Picture group are displayed again. 6 Result: Move The horizontal bar is displayed. Move the horizontal bar’s cursor left or right by pressing the œ or √ button. Press the MENU button. Result: Move The Adjust menu is displayed. Return 4 Contrast The options available in the Picture group are displayed. Store 10 The horizontal bar is displayed. Move the horizontal bar’s cursor left or right by pressing the œ or √ button When you are satisfied with the settings, press the store them. button to Setting the Picture (PC Mode) ➢ 1 Preset to the PC mode by using the SOURCE button. ENG Press the MENU button. PC Result: 2 Press the † or … button to select PC. Result: 3 6 8 9 √ Frequency 50 Phase 10 Position √ Size Wide Information √ The Auto Adjustment is selected. √ Enter Move The screen quality and position are automatically reset with the Auto Adjustment displayed. PC Auto Adjustment √ Frequency 50 Result: Phase 10 The horizontal bar is displayed. Move the horizontal bar’s cursor left or right by pressing the œ or √ button. Position √ Size Wide √ Information Press the MENU button. Return Auto Adjustment Press the † or … button to select the option (Frequency, Phase) to be adjusted. Press the œ or √ button. Result: 7 Auto Adjustment To adjust the screen quality and position automatically, pressing the √ button again. Result: 5 The options available in the PC group are displayed. Press the √ button. Result: 4 The main menu is displayed. √ Enter Move The options available in the PC group are displayed again. Return Frequency Press the † or … button to select Position. Adjust the position by using the †, …, œ, or √ button. When you are satisfied, press the button to store. 50 œ √ Adjust Return To select the picture format which best corresponds to your viewing requirement, select the Size by pressing the † or … button. Press the √ button. Phase Select the option by pressing the œ or √ button. The picture formats are displayed. 9 œ √ Adjust Return Wide - Normal 10 When you are satisfied with the settings, press the store them. 11 If you get the PC information, select the Information by pressing the † or … button. Press the √ button. button to Position Adjust Result: 12 Store The resolution, vertical frequency and horizontal frequency are displayed. When you are satisfied with the settings, press the MENU ( button repeatedly to return to the normal viewing. Size ) Wide œ √ Sel. Store PC Information Resolution 1024x768 V Frequency 60 H Frequency 48 Exit 29 Setting the Picture (Component Mode) ➢ ENG Function Language 1 English Time √ Blue Screen Off Position √ Phase √ Recall √ Press the MENU button. Result: 2 Return Position The options available in the Function group are displayed. 3 Press the √ button. 4 Press the † or … button to select Position. Press the √ button. Adjust the position by using the †, …, œ, or √ button. When you are satisfied with the settings, press the button to store them. Adjust 5 Store The main menu is displayed. Press the † or … button to select Function. Result: √ Enter Move Preset to the Component1 or Component2 mode by using the SOURCE button. Press the MENU button. Result: The options available in the Function group are displayed again. Function Language Time √ Blue Screen Off Position √ Phase √ Recall √ Move 6 English Result: 7 Return 8 Phase œ √ Adjust 9 Exit Function English Time √ Blue Screen Off Position √ Phase √ Recall √ Move √ Enter 30 Return The options available in the Function group are displayed again. Press the † or … button to select Recall. Press the √ button. Result: 0 The horizontal bar is displayed. Move the horizontal bar’s cursor left or right by pressing the œ or √ button. Press the MENU button. Result: √ Enter Language Press the † or … button to select Phase. Press the √ button. The screen quality and position are automatically reset. When you are satisfied with the settings, press the MENU ( button repeatedly to return to the normal viewing. ) Extra Picture Settings ENG ◆ Digital NR You can activate this feature to reduce any static and ghosting that may appear on the screen. ◆ Size You can select the picture format which best corresponds to your viewing requirements. Picture Mode œ Dynamic √ Adjust √ Colour Tone œ Normal √ Digital NR On Size Wide LNA Off Move ◆ LNA (Low Noise Amplifier) This feature is very useful in the situation that the TV is used in a weak signal and amplifies the TV signal in the weak signal area, but not noise. This feature is working only in a weak signal condition, and that is memorized on current channel, additional. ➢ Available in TV mode. Mode œ Dynamic √ Adjust √ Colour Tone œ Normal √ Digital NR Off Size Wide LNA Off Press the MENU button. The options available in the Picture group are Result: displayed. 2 Press the √ button. 3 Select the required option by pressing the † or … button. 4 Press the œ or √ button to change the setting. Return Picture Move 1 œ √ Sel. √ Enter Return Size Wide œ √ Sel. Store ◆ Digital NR : Off or On TV ◆ Size : Wide - Panorama - Zoom1 - Zoom2 - 14:9 - Normal ➢ You can also select these options simply by pressing the P.SIZE button on the remote control. ◆ LNA : Off or On Picture Mode œ Dynamic √ Adjust √ Colour Tone œ Normal √ Digital NR Off Size Wide LNA On Move œ √ Sel. 31 Return Setting the Blue Screen ENG If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue Screen“ mode to “Off“. Function Language English Time √ Teletext Source Main Plug & Play √ Blue Screeen Off Move œ √ Sel. 1 Press the MENU button. Result: Return 2 The main menu is displayed. Press the † or … button to select Function. Result: The options available in the Function group are displayed. 3 Press the √ button. 4 Press the † or … button to select Blue Screen. Press the √ button. 5 Press the œ or √ button to change the setting. (On or Off). Selecting the Film Mode (Video or S-Video Mode only) You can automatically sense and process film signals from all sources and adjust the picture for optimum quality. Picture Mode œ Standard √ Adjust √ Colour Tone œ Normal √ Digital NR On Size Auto Wide Film Mode Off Move œ √ Sel. 1 Press the MENU button. Result: The options available in the Picture group are displayed. 2 Press the √ button. 3 Press the † or … button to select Film Mode Press the √ button. 4 Press the œ or √ button to change the setting. (Off or On). Return ◆ On : Automatically senses and processes film signals from all sources and adjusts the picture for optimum quality. ◆ Off : Switches off the Film Mode. ➢ 32 Film mode is supported in Video, S-Video, Component 480i. DNIeTM (Digital Natural Image engine) ENG This feature bring you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, much detailed image to you. DNIeTM technology will fit every signals into your eyes. Press the DNIe button repeatedly to select the following options. ◆ On : Switches on the DNIe mode. ◆ Off : Switches off the DNIe mode. DNIe On ◆ Demo (Option) : The screen before applying DNIe appears on the right and the screen after applying DNIe appears on the left. Freezing the Current Picture You can freeze the picture when watching a television programme simply by pressing the “STILL” button. To return to normal viewing, press it again. ➣ In the PIP mode, the main and sub pictures are stilled at the same time. 33 Changing the Sound Standard ENG You can select the type of special sound effect to be used when watching a given broadcast. Sound œ Standard √ Mode Equalizer √ Auto Volume Off Melody Off Pseudo Stereo Off Virtual Surround Off 1 Result: 2 œ √ Sel. Move Press the MENU button. Press the † or … button to select Sound. Result: Return The main menu is displayed. The options available in the Sound group are displayed. 3 Press the √ button. The Mode is selected. Result: 4 Select the option by pressing the œ or √ button. The sound effects are displayed in the following order. Standard - Music - Movie - Speech - Custom Adjusting the Sound Settings The sound settings can be adjusted to suit your personal preferences. Sound Mode œ Standard √ Equalizer √ Auto Volume Off Melody Off Pseudo Stereo Off Virtual Surround Off Move 1 Press the MENU button. Result: 2 Press the † or … button to select Sound. Result: √ Enter Return The main menu is displayed. The options available in the Sound group are displayed. 3 Press the √ button. 4 Press the † or … button to select Equalizer. Press the √ button. Equalizer (Standard) Result: 10 R 5 Select the option (volume, balance, equalizer) to be adjusted by pressing the œ or √ button. Press the † or … button to reach the required setting. 6 When you are satisfied with the settings, press the store them. L 100 300 œ √ Move Adjust 1K 3K 10K Store ➣ 34 The Equalizer menu is displayed with the current option. button to If you make any changes to the equalizer settings, the sound standard is automatically switched to the Custom. Extra Sound Settings ENG ◆ Auto Volume Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. Sound œ Standard √ Mode Equalizer √ Auto Volume Off Melody Off Pseudo Stereo Off Virtual Surround Off œ √ Sel. Move Return ◆ Melody You can hear clear melody sound when the television is powered on or off. Sound œ Standard √ Mode ◆ Pseudo Stereo / Virtual Surround Pseudo stereo feature converts a monaural sound signal into two identical left and right channels. Once the Pseudo stereo or Virtual surround is set to On or Off, these settings apply to the sound effects such as Standard, Music, Movie, and Speech. Equalizer √ Auto Volume Off Melody Off Pseudo Stereo Off Virtual Surround Off œ √ Sel. Move Return Sound 1 2 Press the MENU button. The main menu is displayed. Result: Press the † or … button to select Sound. The options available in the Sound group are displayed. Result: 3 Select the required option by pressing the † or … button. 4 Press the œ or √ button to change the setting. (Off or On). œ Standard √ Mode Equalizer √ Auto Volume Off Melody Off Pseudo Stereo Off Virtual Surround Off œ √ Sel. Move Return Sound œ Standard √ Mode Equalizer √ Auto Volume Off Melody Off Pseudo Stereo Off Virtual Surround Off Move œ √ Sel. 35 Return Selecting the DUAL Mode (depending on the model) ENG The “Dual I- II” button displays/controls the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either “Dual-I ” or “Stereo”, depending on the current transmission. NICAM Stereo Type of broadcast On-screen indication Regular broadcast (Standard audio) Mono (Normal use) Regular + NICAM Mono NICAM Mono ↔ Mono NICAM Stereo A2 Stereo NICAM Dual-I/II NICAM Dual-I → NICAM Dual-II → Mono Regular broadcast (Standard audio) Mono Bilingual or Dual-I/II Dual-I ↔ Dual-II Stereo ➣ NICAM Stereo ↔ Mono (Forced mono) Stereo ↔ Mono (Forced mono) ◆ If the receiving conditions deteriorate, listening will be easier if the mode is set to the Mono. ◆ If the stereo signal is weak and an automatic switching occurs, then switch to the Mono. ◆ When receiving a mono sound in the AV mode, connect to the “AUDIO-L” input connector on the side of the television. If the mono sound comes out only from left speaker, press the DUAL I-II button. 36 Setting the Time and Switching the TV On/Off Automatically ENG You can set the television’s clock and set the On or Off timers so that the television will switch on or off automatically at the time you select. Function Language 1 2 Press the MENU button. The main menu is displayed. Result: √ Teletext Source Main Plug & Play √ Blue Screen Off Press the † or … button to select Function. The options available in the Function group are Result: displayed. 3 Press the √ button. 4 Press the † or … button to select Time. Press the √ button. The Time menu is displayed with the Clock option Result: selected. 5 Set the clock by pressing the numeric buttons. 6 Press the † or … button to select Timer. Set to On by pressing the œ or √ button. for switching on automatically. ➣ If you have not set the clock, you can not select the Timer. English Time Move √ Enter Time --:-- Clock Timer Off On Time --:-- Off Time --:-- Move Adjust 8 Press the † or … button to select On Time. Set the time to switch on automatically by pressing the numeric buttons. In the same way, set the Off Time to switch off automatically. Store Time Clock 11:35 Timer 7 Return On On Time --:-- Off Time --:-- Move œ √ Sel. Store Time Clock 11:35 Timer On On Time 06:30 Off Time --:-- Move Adjust Store Time Clock 11:35 Timer On On Time 06:30 Off Time 23:00 Move Adjust 37 Store Setting the Sleep Timer ENG You can select a time period of between 15 and 180 minutes after which the television automatically switches to Standby mode. TV 1 Press the SLEEP button. The Sleep timer menu is displayed. Result: ◆ If the sleep timer is not yet set, Off is displayed. If the sleep timer is already set, the remaining time before which the television switches to Standby mode is displayed. 2 Select the preset time intervals (15, 30, 45, 60, 75, 90, 105, 120, 135, 150, 165, 180) by pressing the œ or √ button. 3 Press the Sleep timer Off œ √ Sel. Store 38 button to confirm your selection. Viewing the Picture In Picture (PIP) ENG You can display a sub picture within the main picture of TV program or external A/V devices. In this way you can watch TV program or monitor the video input from any connected devices while watching TV or other video input. 1 Press the MENU button. Result: 2 The main menu is displayed. PIP On Sel. TV Swap √ Size Large Prog. No P01 Press the † or … button to select PIP. Result: 4 To activate, set the PIP to on by pressing the œ or √ button. Press the † or … button to select Sel.. Select a source of the sub picture by pressing the œ or √ button. PIP On Sel. TV Swap √ Size Large Prog. No P01 The sources are displayed in the following order: ➣ ◆ The PC, Component1, Component2 can not be selected in DVI mode. ◆ The DVI, Component1, Component2 can not be selected in PC mode. ◆ The PC, DVI, Component2 can not be selected in Component1 mode. Return PIP PIP On Sel. TV Swap √ Size Large Prog. No P01 ◆ The PC, DVI, Component1 can not be selected in Component2 mode. √ Enter Move Return Press the † or … button to select Swap. Press the œ or √ button. Result: 7 œ √ Sel. Move TV - Video - S-Video - Component1 Component2 - PC - DVI 6 Return PIP Press the √ button. Result: œ √ Sel. Move The options available in the PIP group are displayed. 3 5 PIP Press the † or … button to select Size. Select a size of the sub picture by pressing the œ or √ button. Result: PIP The main picture and sub picture are interchanged. The sizes are displayed in the following order: PIP On Sel. TV Swap √ Size Large Prog. No P01 Large - Small - Double1 - Double2 - 12PIP ◆ 12PIP : Used to view up to 12 memorized channels on the sub picture spontaneously. available in Component1, ➣ Not Component2, PC or DVI mode. 8 Press the † or … button to select Prog.No.. Select the channel that you want to view through sub picture by pressing the œ or √ button. œ √ Sel. Move Return PIP PIP On Sel. TV Swap √ Size Large Prog. No P01 œ √ Sel. Move 39 Return Viewing the Picture In Picture (PIP) (continued) ENG Easy functions of remote control. 40 Buttons Feature PIP ON Used to activate or deactivate the PIP function directly. LOCATE Used to move the sub picture counterclockwise. P Used to select the channel of sub picture. / SCAN Used to scan every memorized channel in order. To stop scanning, press it again. SOURCE Used to assign a source of sub picture (TV, Video, S-Video, Component1, Component2, PC, DVI). Listening to the Sound of the Sub Picture (PC or DVI Mode) ➢ Preset to the PC or DVI mode by using the SOURCE button. ENG During the PIP feature is activating, you can listen to the sound of the sub picture. 1 Press the MENU button. Result: 2 The main menu is displayed. Press the † or … button to select PIP. Result: PIP PIP On Sel. TV Swap √ Size Large Sound Sel. Sub The options available in the PIP group are displayed. œ √ Sel. Move 3 Press the √ button. 4 Press the † or … button to select Sound Sel.. Set to Sub by pressing the œ or √ button. Result: ➣ You can listen to the sound of the sub picture. To listen the sound of current main picture, set to Main. 41 Return Teletext Feature ENG Most television channels provide written information services via teletext. Information provided includes: ◆ Television programme times ◆ News bulletins and weather forecasts ◆ Sports results ◆ Travel information This information is divided into numbered pages (see diagram). Part Contents A Selected page number. B Broadcasting channel identity. C Current page number or search indications. D Date and time. E Text. F Status information. FASTEXT information. ➣ Teletext information is often divided between several pages displayed in sequence, which can be accessed by: ◆ Entering the page number ◆ Selecting a title in a list ◆ Selecting a coloured heading (FASTEXT system) 42 Displaying the Teletext Information ENG You can display Teletext information at any time on your television Teletext information to be displayed correctly, ☛ For channel reception must be stable; otherwise: ◆ Information may be missing ◆ Some pages may not be displayed 1 Select the channel providing the Teletext service by pressing the P or button. 2 Press the TTX/MIX button to activate the teletext mode. Result: The contents page is displayed. It can be redisplayed at any time by pressing the (index) button. 3 Press the TTX/MIX button again. The screen will be split into two. This Double Teletext Result: feature lets you view the actual broadcast and teletext information separately on the screen. 4 If you wish to display the current input source and teletext page on a single screen, press the TTX/MIX button again. 5 To exit from the teletext display, press the TTX/MIX button again. Selecting Display Options When you have displayed a Teletext page, you can select various options to suit your requirements. To display... Press the... ◆ Hidden text (answers to quiz games, for example) (reveal) ◆ The normal screen (reveal) again ◆ A secondary page by entering its number (sub-page) ◆ The broadcast when searching for a page (cancel) ◆ The next page (page up) ◆ The previous page (page down) ◆ Double-size letters in the: • Upper half of the screen • Lower half of the screen (size) • Once • Twice ◆ The normal screen • Three times 43 Selecting the Teletext Source (Option) ENG When you watching the current channel you can display the Teletext information of other channel. Function Language English Time √ Teletext Source Main Plug & Play √ Blue Screen Off œ √ Sel. Move 1 Result: English Time √ Teletext Source Sub Plug & Play √ Blue Screen Off œ √ Sel. Move The main menu is displayed. 2 Press the † or … button to select Function. The options available in the Function group are Result: displayed. 3 Press the √ button. 4 Press the † or … button to select Teletext Source. 5 Select the required option (Main or Sub) by pressing the œ or √ button. Return Function Language Press the MENU button. ◆ If you set to Main, you can display the teletext information of current channel. Return ◆ If you set to Sub, you can display the teletext information of other channel. - If the PIP feature is activating, you can display the teletext information of sub channel. If change the channel of sub picture, you can display the teletext information of the changed sub channel. - If the Double Teletext feature is activating, you can display the teletext information of other channel at the same time as the current channel. 44 Selecting a Teletext Page ENG You can enter the page number directly by pressing the numeric buttons on the remote control. 1 Enter the three-digit page number given in the content by pressing the corresponding numeric buttons. Result: The current page counter is incremented and the page is then displayed. If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence. 2 If the FASTEXT system is used by the broadcasting company, the different topics covered on a Teletext page are colour-coded and can be selected by pressing the coloured buttons on the remote control. Press the coloured button corresponding to the topic that you wish to select; the available topics are given on the status line. Result: The page is displayed with other coloured information that can be selected in the same way. 3 To display the previous or next page, press the corresponding coloured button. 4 To display the subpage, see the following steps. ◆ Press the (sub-page) button. The available subpages appear. Result: ◆ Select the required sub-page. Sub-pages can be scrolled by pressing the or button. 5 When you have finished, press the EXIT ( your normal broadcast. ) button to return to 45 TeleWeb Feature (Option) ENG TeleWeb is the new television broadcasting standard for Teletext services. TeleWeb is similar to Teletext, just easy to use. TeleWeb can transmit the News, TV programme information, and advertising in excellent picture quality and directly access via the remote control. Function Language English Time √ Teleweb √ Plug & Play √ Blue Screen Off √ Enter Move Return 1 Press the MENU button. The main menu is displayed. Result: 2 Press the † or … button to select Function. The options available in the Function group are Result: displayed. 3 Press the √ button. 4 Press the † or … button to select Teleweb. Press the √ button. The Teleweb menu is displayed. Result: 5 To activate the Teleweb feature, set the Teleweb to On by pressing the œ or √ button. ◆ If you set to On, 400 teletext pages can be stored. ◆ If you set to Off, 2100 teletext pages can be stored. 6 Press the † or … button to select Provider Search. Start the provider search by pressing the œ or √ button. It will be search only the channels stored. If find a Result: provider, the Added is displayed and continue the search. Teleweb Setting Teleweb On Provider Search √ Provider Select -- ----- ---------- Download Off œ √ Sel. Move Return Teleweb Setting Teleweb On Provider Search √ Provider Select -- ----- ---------- Download Off √ Enter Move Return ➢ To stop the search before it has finished, press the TV button. Provider Search 7 2% P1 ----- Added ➢ Exit Teleweb Setting Teleweb On Provider Search √ Provider Select P3 KABEL Service 15 Download Off œ √ Sel. Move Return Teleweb Setting Teleweb On √ Provider Select P3 KABEL Service 15 Download On œ √ Sel. 46 Return Select a provider and then the teleweb downloading will start. 8 Press the TeleWeb button to enter the teleweb mode. 9 If you want to download the Teleweb information before switch the television off, select the Download by pressing the † or … button. Press the † or … button to set to On. Even though you turn off the TV on the channel no Result: provider is selected, the channel will be automatically switched to the selected channel and TeleWeb downloading will start. During downloading, the picture will not be shown and only status bar will be displayed on the screen. (It takes 30 minutes to one hour depending on the program.) ➣ Provider Search Move When the search has been finished, press the † or … button to select Provider Select. Find the required provider by pressing the œ or √ button. ◆ When pressing the “ I ” button (On/Off) on the panel of the television, the existing downloaded information will disappear. ◆ If you enter the TeleWeb mode on the channel where no provider is selected, you can view only the information downloaded up to now. Using the TeleWeb Menu after Displaying the TeleWeb ENG Bookmarking the current page. TeleWeb 1 On the page you wish to add to the bookmark list press the MENU button. Result: 2 The TeleWeb menu is displayed. Press the † or … button to select Add Bookmark. Press the button. Result: ➢ Bookmark List √ Add Bookmark √ Home Page √ Current program * Selected provider * The current page is added to the bookmark list. You can register up to six pages. If you add another URL when six bookmarks have been listed, the first URL will be deleted and the new URL will be listed as the sixth. Service is loading √ Enter Move Return TeleWeb Entering the bookmarked URL. 1 The TeleWeb menu is displayed with the Bookmark List is selected. Press the √ button. Result: 3 √ √ Home Page √ Press the MENU button. Result: 2 Bookmark List Add Bookmark Current program * Selected provider * Service is loading √ Enter Move Return The stored URLs are listed. To erase a URL, select a required URL and press the TeleWeb button. SAMSUNG ELECTRONICS Result: TARA SYSTEMS The selected URL is erased and the listed URLs moves up one by one. Bookmark List KIA MOTORS MICRONAS 4 Select the URL you wish to enter by pressing the † or … button and press the button Result: The current page moves to the selected URL and the menu is disappeared. OLYMPIC NEWS ECONOMICS Move Erase √ Enter TeleWeb Opening the Home Page 1 Press the MENU button. Result: 2 The TeleWeb menu is displayed. Press the † or … button to select Home Page. Press the button. Result: Bookmark List √ Add Bookmark √ Home Page √ Current program * Selected provider * Service is loading Move √ Enter It moves to a home page. 47 Return Easy Accessing the TeleWeb Service via the Remote Control ENG Button TeleWeb HOME Function Activate or deactivate the TeleWeb feature directly. Move the home page of the TeleWeb. Dispaly the forward page of the TeleWeb Dispaly the backward page of the TeleWeb Select a option. Confirm your choice. Viewing Pictures From External Sources Once you have connected up your various audio and video systems, you can view different sources by selecting the appropriate input. AV Input TV Video S-Video Component1 Component2 PC DVI Not Connected Not Connected Not Connected Not Connected Connected Not Connected Sel. Store 48 1 Check that all the necessary connections have been made. 2 Switch your television on, then press the SOURCE ( Result: The input sources available are displayed. 3 Press the † or … button to select the required input source and press the button. ➣ ) button. If you change the external source while viewing, pictures might take a short period of time to be switched. Connecting to the External Devices ENG “MONITOR OUT” are used for the equipment with an RGB output, such as video game devices or video disc players. Rear of the TV (Output) VCR ② ① DVD Decoder / Video game device Rear of the TV (Input) ③ Video disc player A Satellite receiver ① This end can be fitted with three RCA connectors (VIDEO + AUDIO-L and R) ② If you have a second VCR and wish to copy cassettes tape, connect the source VCR to “A” and the target VCR to “MONITOR OUT” so that you can redirect the signal from source VCR to target VCR. ③ If you have a decoder, connect the decoder to the VCR and the VCR to the TV. ➃ “MONITOR OUT” is used for displaying the current picture to an external device. When you wish to record the current picture, connect the VCR to “MONITOR OUT”. ☛ Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions. 49 Connecting to the DVD Input ENG The RCA connectors are used for equipment with a DVD output. (480i/480p/576i/576p/720p/1080i) Rear of the TV Y / Pb / Pr DVD L/R Connecting to the S-Video Input The S-VIDEO and RCA (AUDIO-L/R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Rear of the TV Camcorder ① and ① To play picture and sound, both the S-VIDEO and RCA connectors must be used. 50 VCR Connecting to the DVI Input ENG The “DVI IN” (video) and “AUDIO” connectors are used for equipment with a DVI output. Rear of the TV Personal Computer and Connecting to the PC Input The “PC IN (RGB IN)” (video) and “AUDIO” connectors are used for interfacing with your PC. Rear of the TV Personal Computer and 51 Setting up Your PC Software (Windows only) ENG The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) On the windows screen, select in the following sequence: Start ➞ Settings ➞ Control Panel. When the control panel screen appears, click on Display and a display dialog-box will appear. Select the Settings tab in the display dialog-box. The two key variables that apply the television-PC interface are “Resolution” and “Colours”. The correct settings for these two variables are: ◆ Size (sometimes called “Resolution”) - 640 x 480 pixels (PS42P3S) - 1024 x 768 pixels (PS50P3H/PS63P3H) ◆ Colour 24-bit colour (might also be expressed as “16 million colours”) Shown at left is a typical screen for “Display” dialog box. If a vertical-frequency option exists on your display settings dialog box, the correct value is 60 Hz. Otherwise, just click OK and exit the dialog box. 52 Input Mode (PC/DVI) ENG Both screen position and size will vary depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: Standard Dot x Line VGA 640 x 350 640 x 400 720 x 400 640 x 480 SVGA 800 x 600 XGA 1024 x 768 WVGA 848 x 480 WXGA+ (PS50/63P3H) 1366 x 768 ◆ ◆ ◆ ◆ Vertical frequency (Hz) Horizontal frequency (kHz) Vertical polarity Horizontal polarity 75 85 85 70 85 60 72 75 85 56 60 72 75 85 60 70 75 60 72 75 31.5 37.9 37.9 31.5 37.9 31.5 37.9 37.5 43.3 35.2 37.9 48.1 46.9 53.7 48.4 56.5 60.0 29.8 35.1 36.0 N N P P P N N N N N/P P P P P N N P N N N P P N N N N N N N N/P P P P P N N P P P P 60 48.2 N N (N: Negative / P: Positive) The interlace mode is not supported. The television might operate abnormally if a non-standard video format is selected. ”1366 x 768” is not available in DVI mode. The 1366 x 768 mode is only supported by a particular video card (PIXEL PERFECT made by IMAGINE GRAPHICS Ltd.). Notes ◆ The PC text quality for PS42P3S is optimum in VGA mode (640 x 480). For PS50P3H and PS63P3H, use XGA mode (1024 x 768). ◆ When this television is used as a PC display, 24-bit colour is supported (over 16 million colours). ◆ Your PC display screen might appear different depending on the manufacturer (and your particular version of Windows). Check your PC instruction book for information about connecting your PC to a television. ◆ If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5kHz (horizontal). In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned off (or if the PC is disconnected). If so, press the Source button to enter the Video mode. Also, make sure that the PC is connected. ◆ When connecting a notebook PC to the television, make sure that the PC screen is displayed through only the television (Otherwise, random signals might appear). ◆ When horizontal synchronous signals seem irregular in PC mode, check PC power saving mode or cable connections. 53 Pin Configurations ENG PC Input Connector (15Pin) Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 54 DVI Input Connector (24Pin) PC IN Red (R) Green (G) Blue (B) Grounding Grounding (DDC) Red (R) Grounding Green (G) Grounding Blue (B) Grounding Reserved Sync Grounding Grounding Data (DDC) Horizontal sync. Vertical sync. Clock (DDC) Pin Signal 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 T.M.D.S. Data2T.M.D.S. Data2+ T.M.D.S. Data2/4 Shield T.M.D.S. Data4T.M.D.S. Data4+ Clock (DDC) Data (DDC) Not Connected T.M.D.S. Data1T.M.D.S. Data1+ T.M.D.S. Data1/3 Shield T.M.D.S. Data3T.M.D.S. Data3+ +5V Power 5V Grounding Hot Plug Detect T.M.D.S. Data0T.M.D.S. Data0+ T.M.D.S. Data0/5 Shield T.M.D.S. Data5T.M.D.S. Data5+ T.M.D.S. Clock Shield T.M.D.S. Clock+ T.M.D.S. Clock- Troubleshooting: Before Contacting Service Personnel ENG Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer. No sound or picture ◆ Check that the mains lead has been connected to a wall socket. ◆ Check that you have pressed the “ I ” button (On/Off) and the POWER ( ) button. ◆ Check the picture contrast and brightness settings. ◆ Check the volume. Normal picture but no sound ◆ Check the volume. ◆ Check whether the volume MUTE button on the remote control has been pressed. No picture or black and white picture ◆ Adjust the colour settings. ◆ Check that the broadcast system selected is correct. Sound and picture interference ◆ Try to identify the electrical appliance that is affecting the television, then move it further away. ◆ Plug your television into a different mains socket. Blurred or snowy picture, distorted sound ◆ Check the direction, location and connections of your aerial. This interference often occurs due to the use of an indoor aerial. Remote control malfunctions ◆ Replace the remote control batteries. ◆ Clean the upper edge of the remote control (transmission window). ◆ Check the battery terminals. 55 - AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present. ELECTRONICS BN68-00481A-00
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Create Date : 2003:05:08 06:56:36Z Modify Date : 2003:05:22 10:48:15+09:00 Page Count : 56 Creation Date : 2003:05:08 06:56:36Z Mod Date : 2003:05:22 10:48:15+09:00 Producer : Acrobat Distiller 5.0.5 for Macintosh Author : da Metadata Date : 2003:05:22 10:48:15+09:00 Creator : da Title : D60A_ENG_asia_all_remote Has XFA : NoEXIF Metadata provided by EXIF.tools