Samsung Flat Panel Television Uc7000 Users Manual

UC7000 to the manual 9bf539de-eed6-40c9-80ec-f3b4c6512318

: Samsung Samsung-Samsung-Flat-Panel-Television-Uc7000-Users-Manual-279803 samsung-samsung-flat-panel-television-uc7000-users-manual-279803 samsung pdf

Open the PDF directly: View PDF .
Page Count: 62

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Country

Customer Care Centre

Web Site

AUSTRALIA 1300 362 603 www.samsung.com

NEW ZEALAND 0800 SAMSUNG (0800 726 786) www.samsung.com

CHINA 400-810-5858

010-6475 1880

www.samsung.com

HONG KONG (852) 3698-4698 www.samsung.com/hk

www.samsung.com/hk_en/

INDIA 3030 8282

1800 110011

1800 3000 8282

1800 266 8282

www.samsung.com

INDONESIA 0800-112-8888

021-5699-7777

www.samsung.com

JAPAN 0120-327-527 www.samsung.com

MALAYSIA 1800-88-9999 www.samsung.com

PHILIPPINES 1-800-10-SAMSUNG(726-7864)

1-800-3-SAMSUNG(726-7864)

1-800-8-SAMSUNG(726-7864)

02-5805777

www.samsung.com

SINGAPORE 1800-SAMSUNG(726-7864) www.samsung.com

THAILAND 1800-29-3232

02-689-3232

www.samsung.com

TAIWAN 0800-329-999 www.samsung.com

VIETNAM 1 800 588 889 www.samsung.com

© 2010 Samsung Electronics Co., Ltd. All rights reserved. BN68-02831A-01

LED TV

user manual

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

Model _____________ Serial No. _____________

[UC7000_Aus]BN68-02831A-01Eng.indb 1 2010-03-16 오후 2:03:23

2

English

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

Product design and specifications may be changed without notice.

Still image warning

Avoid displaying still images (like jpeg picture files) or still image element (like TV programme logo, panorama or 4:3 image format, stock or news bar at

screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of LED screen, which will affect image quality. To reduce risk of

this effect, please follow below recommendations:

• Avoid displaying the same TV channel for long periods.

• Always try to display image in full screen mode, use TV set picture format menu for best possible match.

• Reduce brightness and contrast values to minimum required level to achieve desired picture quality, exceeded values may speed up the burnout

process.

• Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.

Securing the Installation Space

Keep the required distance between the product and other objects (e.g. walls) to ensure proper ventilation.

Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.

✎

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

x

If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

✎

The appearance may differ depending on the product.

Installation with a stand. Installation with a wall-mount.

10 cm

10 cm

10 cm 10 cm

10 cm

10 cm

10 cm

[UC7000_Aus]BN68-02831A-01Eng.indb 2 2010-03-16 오후 2:03:23

3

ENGLISH

English

Contents

Getting Started

4

4 Accessories

5 Viewing the Control Panel

6 Viewing the Remote Control

7 Connecting to an Antenna

7 Plug & Play (Initial Setup)

Connections

8

8 Connecting to an AV Device

10 Connecting to an Audio Device

10 Changing the Input Source

Basic Features

11

11 How to Navigate Menus

11 Using the INFO button (Now & Next guide)

11 Planning Your Viewing

13 Channel Menu

15 Picture Menu

20 Sound Menu

22 Setup Menu

24 Support Menu

Advanced Features

26

26 Connecting to a PC

27 Network Connection

34 Media Play

42 Anynet+

46 Internet@TV

50 AllShare

Other Information

52

52 Analogue Channel Teletext Feature

53 Assembling the Cables

53 Installing the Wall Mount

55 Anti-theft Kensington Lock

55 Securing the TV to the wall

56 Troubleshooting

60 Specifications

61 Index

Check the Symbol!

t

This function can be used by

pressing the TOOLS button on the

remote control.

Note One-Touch Button

TOOLS

TOOLS

[UC7000_Aus]BN68-02831A-01Eng.indb 3 2010-03-16 오후 2:03:24

4

English

Getting Started

Accessories

✎

Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.

✎

The items’ colours and shapes may vary depending on the models.

[

CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET

yRemote Control & Batteries (AAA x 2)

yWarranty Card / Safety Guide (Not available in some locations)

yCleaning Cloth

yOwner’s Instructions

(M4 X L8)

yBlanking Bracket & Screw (1EA) yHolder-Ring (4EA) yHolder-Wire stand

yCable Tie yHolder-Wire (3EA) yLAN Adapter

yAntenna Adapter

(Air / Cable)

yOptical Adapter yPC Adapter

yComponent Adapter yAV1 Adapter yAV2 Adapter

See separate guide for installing the stand.

M4 X L8

yStand (1EA) yGuide Stand (1EA) yScrews (9EA)

✎

For best cable connection to this product, be sure to use a cables with a maximum thickness as below:

yMaximum thickness - 0.55 inches (14mm)

[UC7000_Aus]BN68-02831A-01Eng.indb 4 2010-03-16 오후 2:03:26

5

01 Getting Started

English

Viewing the Control Panel

✎

The product colour and shape may vary depending on the model.

✎

Contact with objects other than your finger may switch on the LED touchpad.

Remote control sensor Aim the remote control towards this spot on the TV.

Power Indicator Blinks and turns off when the power is on and lights up in standby mode.

SOURCE

E

Toggles between all the available input sources. In the on-screen menu, use this

button as you would use the ENTER

E

button on the remote control.

MENU

m

Displays an on-screen menu, the OSD (on screen display), of your TV’s features.

y

Adjusts the volume. In the OSD, use the

y

buttons as you would use the

◄ and ► buttons on the remote control.

z

Changes the channels. In the OSD, use the

z

buttons as you would use the

▼ and ▲ buttons on the remote control.

P

(Power) Turns the TV on or off.

Standby mode

Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount

of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.

Remote control sensor

Speakers

Power Indicator

[UC7000_Aus]BN68-02831A-01Eng.indb 5 2010-03-16 오후 2:03:26

6

Getting Started

English

Viewing the Remote Control

Installing batteries (Battery size: AAA)

✎

NOTE

x

Use the remote control within 23 feet from the TV.

x

Bright light may affect the performance of the remote control.

Avoid using nearby special fluorescent light or neon signs.

x

The colour and shape may vary depending on the model.

POWER SOURCE ON/OFF

PRE-CH

INTERNET

@TV

CONTENT

MEDIA.P

P.SIZEAD

SUBT.

A B C D

3D

TTX/MIX

GUIDE

CH LIST

MUTE

TOOLS

RETURN

EXIT

INFO

MENU

Turns the TV on and off.

Displays and selects the available video

sources (p. 10).

Turns the remote control light on or

off. When on, the buttons become

illuminated for a moment when pressed.

(Using the remote control with this button

set to on will reduce the battery usage

time.)

Returns to the previous channel.

Cuts off the sound temporarily.

Changes channels.

Displays channel lists on the screen

(p. 13).

Displays the EPG (Electronic Programme

Guide) (p.11).

Displays information on the

TV screen.

Exits the menu.

Have direct access to channels.

Adjusts the volume.

Alternately selects Teletext, Double or

Mix.

Opens the OSD.

Quickly select frequently used functions.

Displays the Content View, which

includes Guide, Internet@TV,

Media Play, and AllShare.

Returns to the previous menu.

Selects the on-screen menu items and

changes the values seen on the menu.

These buttons are for the

Channel Manager, Internet@TV,

Media Play menu, etc.

Use these buttons in Media Play

and Anynet+ modes (p. 34, 42).

(



: Controls recording for Samsung

recorders that have the Anynet+ feature)

MEDIA.P: Displays Media Play (p. 34).

INTERNET@: Link to various internet

services (p. 46).

3D: Sets the video, which provided with

3D signal (p. 18).

AD: Turns the audio description on and

off (p. 21). This is not available in some

locations.

P.SIZE: Selects the picture size (p. 16).

SUBT.: Displays digital subtitles (p. 23).

[UC7000_Aus]BN68-02831A-01Eng.indb 6 2010-03-16 오후 2:03:27

7

01 Getting Started

English

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically.

✎

Preset: Connecting the power cord and antenna.

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the

POWER

P

button. Plug & Play is available only when the Input source is set to TV.

✎

To return to the previous step, press the Red button.

1Selecting Store Demo

or Home Use

Press the ◄ or ► button, then press the ENTER

E

button.

ySelect the Home Use mode. Store Demo Mode is for retail

environments.

yReturn the unit’s settings from Store Demo to Home Use

(standard): Press the volume button on the TV. When you see the

volume OSD, press and hold MENU for 5 sec.

P

POWER

2Selecting a country Press the ▲ or ▼ button, then press the ENTER

E

button.

Select the appropriate country.

3Selecting a channel Press the ▲ or ▼ button, then press the ENTER

E

button.

After selecting the channel source to memorise, select Search. For more information, refer

to Channel → Auto Store. (p.13)

✎

Press the ENTER

E

button at any time to interrupt the memorisation process.

4Setting the

Clock Mode

Set the Clock Mode automatically or manually.

Press the ▲ or ▼ button to select Auto, then press the ENTER

E

button.

yAuto: Allows you to select a time zone.

✎

Press the ▲ or ▼ button to highlight the time zone for your local area. Press the

ENTER

E

button. (Australia only)

yManual: Allows you to manually set the current date and time (p. 22).

5Viewing the

HD Connection Guide.

The connection method for the best HD screen quality is displayed.

6Enjoy your TV. Press the ENTER

E

button.

If You Want to Reset This Feature...

Select Setup - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.” If you want to

change the PIN number, use the Change PIN function.

ANT OUT

VHF/UHF Antenna

or

Cable

[UC7000_Aus]BN68-02831A-01Eng.indb 7 2010-03-16 오후 2:03:28

8

English

Connections

Connecting to an AV Device

Using an HDMI or HDMI / DVI Cable: HD connection (up to 1080p)

Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, cable box, satellite receiver

(STB)

✎

HDMI IN 1(DVI), 2(ARC), 3, 4, PC/DVI AUDIO IN

x

When using an HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack. For the DVI cable

connection, use a DVI to HDMI cable or DVI-HDMI (DVI to HDMI) adapter for video connection and the DVI

AUDIO IN jacks for audio.

x

If an external device such as a DVD / Blu-ray player / cable box / STB satellite receiver supporting a HDMI

versions older than 1.4 is connected, the TV may operate abnormally (e.g. no screen display / no sound /

annoying flicker / abnormal color).

x

If there is no sound after connecting an HDMI cable, check the HDMI version of the external device. If you

suspect the version is older than 1.4, contact the provider of the device to confirm the HDMI version and request

an upgrade.

x

Samsung TVs support the HDMI 1.4 (with 3D and Audio Return Channel). However, the ARC(Audio Return

Channel) function is only supported on HDMI IN 2(ARC).

– If 3D Auto View is On, some functions, such as Yahoo or Internet@TV, are disabled. If this is a problem, set

3D Auto View or 3D Mode to Off.

x

The ARC function enables digital output of sound using the HDMI IN 2 port and can only be operated when

the TV is connected to an audio receiver that supports the ARC function.

– The ARC Single mode is only enabled when the TV is connected to the device when using an HDMI Standard

cable, HDMI High Speed cable, Hdmi Standard with Ethernet cable, HDMI High Speed with Ethernet cable.

– When the Input Source is the TV, the ARC function allows audio to be heard from a receiver. The audio is sent

to a receiver from the TV via an HDMI cable without the need for a separate optical cable.

x

It is recommended you purchase an HDMI-certified cable. Otherwise, the screen may appear blank or a

connection error may occur.

(DVI)

HDMI OUT

DVI OUT

R-AUDIO-L

AUDIO OUT

W

R

DVD /

Blu-Ray player

DVD /

Blu-Ray player

Red White

[UC7000_Aus]BN68-02831A-01Eng.indb 8 2010-03-16 오후 2:03:28

9

English

02 Connections

Using a Component (up to 1080p) or Audio/Video (480i only) Cable

Available devices: VCR, DVD, Blu-ray player, cable box, STB satellite receiver

✎

To obtain the best picture quality, the Component connection is recommended over the A/V connection.

PRPB

Y

COMPONENT OUT VIDEO OUTAUDIO OUT

R-AUDIO-L

AUDIO OUT

R-AUDIO-L

Y

W

R

W

R

RG

B

R

G

B

W R

R

B

G

Y

WRWR

Y

W R

VCR

DVD /

Blu-Ray player

Red

Red

White

White

Yellow

Red Blue Green

[UC7000_Aus]BN68-02831A-01Eng.indb 9 2010-03-16 오후 2:03:29

10

English

Connections

Connecting to an Audio Device

Using an Optical (Digital) or Audio (Analogue) Cable or Headphone Connection

Available devices: digital audio system, amplifier, DVD home theatre

✎

DIGITAL AUDIO OUT (OPTICAL)

x

When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume

of both the TV and the system.

x

5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.

x

When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the

TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is

a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is

connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to

hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite

receiver directly to an amplifier or home theatre.

✎

Headphones

H

: You can connect your headphones to the headphones output on your set. While the

headphones are connected, the sound from the built-in speakers will be disabled.

x

Sound function may be restricted when connecting headphones to the TV.

x

Headphone volume and TV volume are adjusted separately.

✎

AUDIO OUT: Connects to the audio input jacks on your amplifier/DVD home theatre.

x

When connecting, use the appropriate connector (sold separately).

x

When an audio amplifier is connected to the AUDIO OUT jacks: Decrease the volume of the TV and adjust

the volume level with the amplifier’s volume control.

Changing the Input Source

Source List

Use to select TV or other external input

sources such as DVD / Blu-ray players

/ cable box / STB satellite receiver

connected to the TV.

■TV /PC / AV1/ AV2 / Component /

HDMI1/DVI / HDMI2 / HDMI3 /

HDMI4 / USB

✎

In the Source List, connected

inputs will be highlighted.

✎

PC always stay activated.

Edit Name

■VCR / DVD / Cable STB / Satellite STB / PVR STB /

AV Receiver / Game / Camcorder / PC / DVI PC /

DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA:

Name the device connected to the input jacks to make

your input source selection easier.

✎

When a PC with a resolution of 1920 x 1080 @

60Hz is connected to the HDMI IN 1(DVI) port,

you should set to DVI PC mode under Edit Name.

✎

When connecting an HDMI/DVI cable to the

HDMI IN 1(DVI) port, you should set to DVI PC or

DVI Devices mode under Edit Name.

SOURCE

OPTICAL

W R

AUDIO OUT

R-AUDIO-L

digital audio system

amplifier /

DVD home theatre

[UC7000_Aus]BN68-02831A-01Eng.indb 10 2010-03-16 오후 2:03:30

11

English

03 Basic Features

Basic Features

How to Navigate Menus

Before using the TV, follow the steps below to learn how to

navigate the menu and select and adjust different functions.

PO

WER

S

OURC

E

O

N/

O

FF

PRE-

CH

INTERNET

@

TV

CO

NTENT

MEDIA

.

P

P

.

S

IZ

E

A

D

S

UBT

.

A

B

C

D

3

D

TTX

/

MI

X

G

UID

E

C

H LI

S

T

MUTE

T

OO

L

S

INF

O

2

1

4

3

RETURN

EXIT

MENU

1 ENTER

E

/ Direction button: Move the cursor and

select an item. Confirm the setting.

2 RETURN button: Returns to the previous menu.

3 MENU button: Displays the main on-screen menu.

4 EXIT button: Exits the on-screen menu.

How to Operate the OSD (On Screen Display)

The access step may differ depending on the selected menu.

1MENU

m

The main menu options appear on

the screen:

Picture, Sound, Channel, Setup,

Input, Application, Support.

2▲ / ▼Select an icon with the ▲ or ▼

button.

3ENTER

E

Press ENTER

E

to access the

sub-menu.

4▲ / ▼Select the desired submenu with

the ▲ or ▼ button.

5◄ / ►Adjust the value of an item with the

◄ or ► button. The adjustment in

the OSD may differ depending on

the selected menu.

6ENTER

E

Press ENTER

E

to complete the

configuration.

7EXIT

e

Press EXIT.

Using the INFO button (Now & Next guide)

The display identifies the current channel

and the status of certain audio-video

settings.

The Now & Next guide shows daily TV

programme information for each channel

according to the broadcasting time.

yScroll ◄, ► to view information for a

desired programme while watching the

current channel.

yScroll ▲, ▼ to view information for other channels. If you

want to move to the currently selected channel, press

the ENTER

E

button.

Planning Your Viewing

Guide

The EPG (Electronic Programme Guide)

information is provided by broadcasters.

Using programme schedules provided

by broadcasters, you can specify

programmes you want to watch in

advance so that the channel automatically

changes to the selected programme

channel at the specified time. Programme

entries may appear blank or out of date depending on a

channel status.

✎

In New Zealand, if Digital Text is set to Enable, the

EPG (Electronic Program Guide) will work. (refer to page

23)

Using Channel View

INFO

GUIDE

DTV

All

350

DUWH

4:45

-

6:20

5:46 Sun 2 May

Karl der GroBe (2/3)

Spiefilm Frankreich / Italien 1994 “Karl der GroBe” war der Wegbereiter

Europas, Der abenteuerliche dreiteilige Fernsehfilm widmet sich dem ...

|

Multi

|

Movie

576i

Dual

͆

4:3SD

Information

E

Watch

DTV Air 800 five

Home and Away

18:00 - 18:30

Drama

Dani is devastated when scott makes clear his views on marriage...

27

28

800

24

16

6

Discovery

DiscoveryH&L

five

price-drop.tv

QVC

R4DTT

American Chopper

Programmes resume at 06:00

Home and...

No Information

QVC Selection

No Information

Tine Team

Fiv...

18:00 - 19:00 19:00 - 20:00

)

Family Affairs

)

Dark Angel

800 five

View Mode

+24 Hours Ch. Mode

Information

k

Page

E

Watch

2:10 Tue 1 Jun

Guide

Channel View - TV

1 2 3 4 5 6

Today

[UC7000_Aus]BN68-02831A-01Eng.indb 11 2010-03-16 오후 2:03:31

12

English

Basic Features

Using Scheduled View

1 Red (View Mode): View the list of programmes that

are playing now or coming up.

2 Yellow (+24 Hours): Viewing the list of programmes to

be broadcasted after 24 hours.

3 Blue (Ch. Mode): Select the type of channels you

want to display on the Channel View window. (All, TV,

Radio, Data/Other, My Channel 1~4)

4 Information: Displays details of the selected

programme.

5

k

(Page): Move to next or previous page.

6 ENTER

E

button.

– When selecting the current programme, you can

watch the selected programme.

– When selecting the future programme, you can

reserve to watch the selected programme. To cancel

the schedule, press the ENTER

E

button again and

select Cancel Schedules.

Channel Manager

Delete or set favourites channels and use the programme

guide for digital broadcasts. Select a channel in the

Channels, My Channels or Scheduled screen.

■ Channels: Shows the channel list according to

channel type.

■

*

My Channels: Shows the group of the channel.

■Scheduled: Shows all the currently reserved

programmes.

✎

Using the colour buttons with the Channel Manager.

x

B

Green (Zoom): Enlarges or shrinks a channel

number.

x

Yellow (Select): Select desired channels and press

the Yellow button to set all the selected channels at

the same time. The

c

mark appears to the left of

the selected channels.

x

Blue (Sort): Change the list ordered by channel

name or channel number.

xk

(Page): Move to next or previous page.

xT

(Tools): Displays the Channel Manager option

menu. (The options menus may differ depending on

the situation.)

Channel Status Display Icons

Icons Operations

A

An analogue channel.

c

A channel selected.

*

A channel set as a Favourite.

(

A programme currently being broadcast.

\

A locked channel.

)

A reserved programme.

2:10 Tue 1 Jun

Guide

DTV Air 800 five

Family Affairs

18:00 - 18:30

Drama

Tanya confesses all to a stunned Babs. Conrad is anxious to hear...

18:30

19:15

)

Family Affairs

)

Dark Angel

800

800

five

five

800 five

View Mode

E

Cancel

Scheduled View

1 6

Wed 29 Jul

Thu 24 Dec

358 ORF1

359 ORF2 0

360 ORF2 S

361 * BBC World

728 \ bid-up.tv

c729 Boonerang

1 C1

2 C2

All

TV

Radio

Data/Other

Analogue

r

A

A

B

Zoom Select Sort

k

Page

T

Tools

Channels

[UC7000_Aus]BN68-02831A-01Eng.indb 12 2010-03-16 오후 2:03:33

13

English

03 Basic Features

¦Using Favourite Channels

*

My Channels

(in Channel Manager)

Shows all favourite channels.

■Edit My Channels

t

: You can set the selected

channels to desired my channels group.

✎

The “

*

” symbol will be displayed and the channel will

be set as a my channel.

1. Select a channel and press the TOOLS button.

2. Add or delete a channel in the my channel groups

you want among 1, 2, 3 and 4.

x

One or more groups can be selected.

3. After you have changed the settings, the channel list

for each group can be viewed in my channel.

Channel List

You can see all the channels searched.

Channel Menu

¦Retuning Channels

Country

You can change the country. The PIN input screen appears.

Enter your 4 digit PIN number.

Auto Store

Scans for a channel automatically and stores in the TV.

✎

Automatically allocated programme numbers may not

correspond to actual or desired programme numbers. If

a channel is locked using the Child Lock function, the

PIN input window appears.

■Channel Source (Digital & Analogue / Digital /

Analogue): Select the channel source to memorise.

Manual Store

Scans for a channel manually and stores in the TV.

✎

If a channel is locked using the Child Lock function,

the PIN input window appears.

■Digital Channel (Channel, Frequency, Bandwidth):

When scanning has finished, channels are updated in

the channel list.

✎

The Bandwidth function is supported in New

zealand and Singapore only.

■Analogue Channel (Programme, Colour System,

Sound System, Channel, Search): If there is abnormal

sound or no sound, reselect the sound standard

required.

✎

Channel mode

x

P (programme mode): When tuning is complete,

the broadcasting stations in your area have been

assigned to position numbers from P0 to P99. You

can select a channel by entering the position number

in this mode.

x

C (aerial channel mode) / S (cable channel mode):

These two modes allow you to select a channel

by entering the assigned number for each aerial

broadcasting station or cable channel.

CH LIST

358 ORF1

359 ORF2 0

360 ORF2 S

361 * BBC World

728 \ bid-up.tv

c729 Boonerang

1 C1

2 C2

All

TV

Radio

Data/Other

Analogue

r

A

A

B

Zoom Select Sort

k

Page

T

Tools

Channels

Edit My Channels

Lock

Timer Recording

Timer Viewing

Edit Channel Number

Delete

d

[UC7000_Aus]BN68-02831A-01Eng.indb 13 2010-03-16 오후 2:03:33

14

English

Basic Features

¦Editing Channels

Channel Manager Option Menu

(in Channel Manager)

1. Select a channel and press the TOOLS button.

2. Edit the channel name or number using the

Edit Channel Name or Edit Channel Number menu.

■Edit Channel Name (analogue channels only): Assign

your own channel name.

■Edit Channel Number (digital channels only)

(New Zealand only): Edit the number by pressing the

number buttons desired.

¦Other Features

Channel Manager

Channel Manager Option Menu

Set each channel using the Channel Manager menu options

(Lock / Unlock, Timer Recording, Timer Viewing, Sort,

Delete, Select All / Deselect All). Option menu items may

differ depending on the channel status.

1. Select a channel and press the TOOLS button.

2. Select a function and change its settings.

■Lock / Unlock: Lock a channel so that the channel

cannot be selected and viewed.

✎

NOTE

x

This function is available only when the Child Lock

is set to On.

x

The PIN input screen appears. Enter your 4-digit PIN,

the default of which is “0-0-0-0.” Change the PIN

using the Change PIN option.

■Timer Recording (digital channels only): Allows you to

record a programme currently being broadcasted or

make a reservation to record a programme scheduled

for broadcast.

✎

A USB device with 4GB of memory or greater

must be connected to the TV.

✎

A USB storage device cannot record until it

completes the Device Performance Test.

■Timer Viewing: You can set a desired channel to be

displayed automatically at the reserved time. Set the

current time first to use this function.

✎

When a digital channel is selected, press the ►

button to view the digital Programme.

■Sort (analogue channels only): This operation allows

you to change the programme numbers of the stored

channels. This operation may be necessary after using

the auto store.

■Delete: You can delete a channel to display the channels

you want.

■Select All / Deselect All: Select all the channels

or deselect all the selected channels in the channel

manager.

Scheduled

(in Channel Manager)

You can view, modify or delete a show you have reserved to

watch.

■Change Info: Change a show you have reserved to

watch.

■Cancel Schedules: Cancel a show you have reserved

to watch.

■Information: Display a show you have reserved

to watch. (You can also change the reservation

information.)

■Select All / Deselect All: Select or deselect all reserved

programmes.

Channel List Transfer

The PIN input screen appears. Enter your 4 digit PIN number.

Imports or exports the channel map. You should connect a

USB storage to use this function.

■Import from USB: Import channel list from USB.

■Export to USB: Export channel list to USB. this function

is available when USB is connected.

Edit Channel Number (Disable / Enable)

(New Zealand only)

Edit the number by pressing the number buttons desired.

Fine Tune

(analogue channels only)

If the signal is weak or distorted, fine tune the channel

manually.

✎

Fine tuned channels are marked with an asterisk “*.”

✎

To reset the fine-tuning, select Reset.

[UC7000_Aus]BN68-02831A-01Eng.indb 14 2010-03-16 오후 2:03:34

15

English

03 Basic Features

Picture Menu

¦Changing the Preset Picture Mode

Mode

Select your preferred picture type.

■Dynamic: Suitable for a bright room.

■Standard: Suitable for a normal environment.

■Natural: Suitable for reducing eye strain.

✎

Natural is not available in PC mode.

■Movie: Suitable for watching movies in a dark room.

¦Adjusting Picture Settings

Backlight / Contrast / Brightness /

Sharpness / Colour / Tint (G/R)

Your television has several setting options for picture quality

control.

✎

NOTE

x

In analogue TV, AV modes of the PAL system, the

Tint (G/R) function is not available.

x

In PC mode, you can only make changes to

Backlight, Contrast and Brightness.

x

Settings can be adjusted and stored for each

external device connected to the TV.

x

Lowering picture brightness reduces power

consumption.

¦Economical Solutions

Eco Solution

■Energy Saving (Off / Low / Medium / High / Picture

Off / Auto)

t

: Adjust the brightness of the TV

in order to reduce power consumption. If you select

Picture Off, the screen is turned off, but the sound

remains on. Press any button except volume button to

turn on the screen.

■Eco Sensor (Off / On): To enhance your power savings;

the picture settings will automatically adapt to the light

in the room.

✎

If you adjust the Backlight, the Eco Sensor will

be set to Off.

Min Backlight: When Eco sensor is On, the minimum

screen brightness can be adjusted manually.

✎

If Eco Sensor is On, the display brightness

may change (become slightly darker or brighter)

depending on the surrounding light intensity.

■No Signal Power Off (Off / 15 min / 30 min / 60 min):

To avoid unnecessary energy consumption, set how long

you want the TV to remain on if it’s not receiving a signal.

✎

Disabled when the PC is in power saving mode.

¦Changing the Picture Options

Advanced Settings

(available in Standard / Movie mode)

You can adjust the detailed setting for the screen including

colour and contrast.

✎

In PC mode, you can only make changes to

Dynamic Contrast, Gamma, White Balance and

LED Motion Plus.

■Black Tone (Off / Dark / Darker / Darkest): Select the

black level to adjust the screen depth.

■Dynamic Contrast (Off / Low / Medium / High): Adjust

the screen contrast.

■Shadow Detail (-2~+2): Increase the brightness of dark

images.

■Gamma: Adjust the primary colour intensity.

■Expert Pattern (Off / Pattern 1 / Pattern 2): By

running the Expert Pattern function, the picture can be

calibrated without a generator or filter. If the OSD menu

disappears or a menu other than the Picture menu is

opened, the calibration is saved and the Expert Pattern

window disap pears.

✎

While the Expert Pattern is running, sound is not

outputted.

✎

Only enabled in DTV, Component and HDMI

modes.

■RGB Only Mode (Off / Red / Green / Blue): You can

adjust Colour or Tint (G/R) of Red, Green or Blue for

the picture from an external device (DVD player, home

theatre, etc.).

■Colour Space (Auto / Native / Custom): Adjust the

range of colours available to create the image. To adjust

Colour, Red, Green, Blue and Reset, set Colour

Space to Custom.

Advanced Settings

Black Tone : Off ►

Dynamic Contrast : Medium

Shadow Detail : 0

Gamma : 0

Expert Pattern : Off

RGB Only Mode : Off

Colour Space : Native

▼

U

Move

E

Enter

R

Return

[UC7000_Aus]BN68-02831A-01Eng.indb 15 2010-03-16 오후 2:03:34

16

English

Basic Features

■White Balance: Adjust the colour temperature for a

more natural picture.

R-Offset / G-Offset / B-Offset: Adjust each colour’s

(red, green, blue) darkness.

R-Gain / G-Gain / B-Gain : Adjust each colour’s (red,

green, blue) brightness.

Reset: Resets the White Balance to it’s default settings.

■10p White Balance (Off / On): Controls the white

balance in 10 point interval by adjusting the red, green,

and blue brightness.

✎

Available when the picture mode is set to Movie

and when the external input is set to HDMI or

Component.

✎

Some external devices may not support this

function.

Interval: Select interval to adjust.

Red: Adjust the red level.

Green: Adjust the green level.

Blue: Adjust the blue level.

Reset: Resets the 10p White Balance to its default

settings

■Flesh Tone: Emphasize pink “Flesh Tone.”

■Edge Enhancement (Off / On): Emphasize object

boundaries.

■xvYCC (Off / On): Setting the xvYCC mode on

increases detail and colour space when watching movies

from an external device (e.g. DVD player) connected to

the HDMI or Component IN jacks.

✎

Available when the picture mode is set to Movie

and when the external input is set to HDMI or

Component.

✎

Some external devices may not support this

function.

■LED Motion Plus (Off / On): Removes drag from fast

scenes with a lot of movement to provide a clear picture.

Picture Options

✎

In PC mode, you can only make changes to the

Colour Tone, Size, Digital Noise Filter and

Auto Protection Time.

■Colour Tone (Cool / Normal / Warm1 / Warm2)

✎

Warm1 or Warm2 will be deactivated when the

picture mode is Dynamic.

✎

Settings can be adjusted and stored for each

external device connected to an input on the TV.

■Size: Your cable box/satellite receiver

may have its own set of screen sizes as

well. However, we highly recommend

you use 16:9 mode most of the time.

Auto Wide (New Zealand, Singapore

only): Automatically adjusts the picture

size to the 16:9 aspect ratio.

16:9 : Adjusts the picture size to 16:9

for DVDs or wide broadcasting.

Wide Zoom: Magnifies the picture size more than 4:3.

✎

Adjusts the Position by using ▲, ▼ buttons.

Zoom: Magnifies the 16:9 wide pictures vertically to fit

the screen size.

✎

Adjusts the Position or Size by using ▲, ▼

buttons.

4:3 : The default setting for a movie or normal

broadcasting.

✎

Do not watch in 4:3 format for a long time. Traces

of borders displayed on the left, right and centre

of the screen may cause image retention(screen

burn) which are not covered by the warranty.

Screen Fit: Displays the full image without any cut-off

when HDMI (720p / 1080i / 1080p) or Component

(1080i / 1080p) signals are inputted.

✎

NOTE

x

When Double (

À

,

Œ

) mode has been set in PIP,

the Picture Size cannot be set.

x

Depending on the input source, the picture size

options may vary.

x

The available items may differ depending on the

selected mode.

x

In PC mode, only 16:9 and 4:3 modes can be

adjusted.

x

Settings can be adjusted and stored for each

external device connected to an input of the TV.

x

After selecting Screen Fit in HDMI (1080i / 1080p)

or Component (1080i / 1080p) mode: Adjusts the

Position or Size by using ▲, ▼, ◄, ► button.

x

If you use the Screen Fit function with HDMI 720p

input, 1 line will be cut at the top, bottom, left and

right as in the overscan function.

■Screen Mode (16:9 / Wide Zoom / Zoom / 4:3)

(New Zealand, Singapore only): Available only when

picture size is set to Auto Wide. You can determine

the desired picture size at the 4:3 WSS (Wide Screen

Service) size or the original size. Each European country

requires different picture size.

✎

Not available in PC, Component or HDMI mode.

Picture Options

Colour Tone : Normal ►

Size : 16:9

Digital Noise Filter : Auto

MPEG Noise Filter : Auto

HDMI Black Level : Normal

Film Mode : Off

200Hz Motion Plus : Off

▼

U

Move

E

Enter

R

Return

P.SIZE

[UC7000_Aus]BN68-02831A-01Eng.indb 16 2010-03-16 오후 2:03:35

17

English

03 Basic Features

■Digital Noise Filter (Off / Low / Medium / High / Auto

/ Auto Visualisation): When the broadcast signal is

weak, some static and ghosting may appear. Select one

of the options until the best picture is displayed.

Auto Visualisation: When changing analogue channels,

displays the intensity of the current signal and defines

the screen noise filter.

✎

Only available for analogue channels.

■MPEG Noise Filter (Off / Low / Medium / High /

Auto): Reduces MPEG noise to provide improved

picture quality.

■HDMI Black Level (Normal / Low): Selects the black

level on the screen to adjust the screen depth.

✎

Available only in HDMI mode (RGB signals).

■Film Mode (Off / Auto1 / Auto2): Sets the TV to

automatically sense and process film signals from all

sources and adjust the picture for optimum quality.

✎

Available in TV, AV, COMPONENT (480i / 1080i)

and HDMI (480i / 1080i).

■200Hz Motion Plus (Off / Clear / Standard / Smooth /

Custom / Demo) : Removes drag from fast scenes with

a lot of movement to provide a clearer picture.

✎

If noise occurs on the screen, please set up the

200Hz Motion Plus to Off. If 200Hz Motion Plus

is Custom, you can set up the Blur Reduction,

Judder Reduction or Reset manually.

✎

If 200Hz Motion Plus is Demo, you can compare

the difference of on and off modes.

Blur Reduction: Adjusts the blur reduction level from

video sources.

Judder Reduction: Adjusts the judder reduction level

from video sources when playing films.

Reset: Reset the custom settings.

■Auto Protection Time (2 hours / 4 hours / 8 hours

/ 10 hours / Off): If the screen remains idle with a still

image for a certain period of time defined by the user,

the screen saver is activated to prevent the formation of

ghost images on the screen.

¦Viewing TV using the 3D function

IMPORTANT SAFETY INFORMATION. READ THE

FOLLOWING WARNINGS BEFORE YOU OR YOUR

CHILD USE THE 3D FUNCTION

[

WARNING

x

Parents’ careful supervision is required particularly

when children or teenagers view 3D images.

x

Photosensitive Seizure Warning and Other Health Risks

– Some viewers may experience an epileptic seizure

or stroke when exposed to certain flashing images

or lights contained in certain television pictures or

video games. If you or any of your relatives has a

history of epilepsy or strokes, please consult with a

medical specialist before using the 3D function.

– Even those without a personal or family history

of epilepsy or stroke may have an undiagnosed

condition that can cause “photosensitive epileptic

seizures.”

– If you experience any of the following symptoms

immediately stop watching 3D pictures and

consult a medical specialist: (1) altered vision;

(2) lightheadedness; (3) dizziness; (4)

involuntary movements such as eye or muscle

twitching; (5) confusion; (6) nausea; (7) loss of

awareness; (8) convulsions; (9) cramps; and/

or (10) disorientation. Parents should monitor

and ask their children about the above symptoms-

children and teenagers may be more likely than

adults to experience these symptoms.

x

Note that watching TV while sitting too close to the

screen for an extended period of time may weaken

your eyesight.

x

Note that watching TV while wearing 3D Active

Glasses for an extended period of time may cause a

headache or fatigue. If you feel headache, fatigue or

dizziness, stop watching TV and rest.

x

Some 3D pictures may startle viewers. The pregnant,

elderly, epileptic and those suffering from serious

physical conditions are advised to avoid utilizing the

unit’s 3D functionality.

x

We don’t recommend 3D pictures to those who are

in bad physical condition, who are sleep-deprived or

who drank liquor.

x

Please take care to be aware of the world around

you. This product is designed to be immersive. DO

NOT use this product near open stairwells, cables,

balconies, or other objects that can be tripped over,

run into, knocked down, broken or fallen over. Being

startled or deluding yourself into thinking that the 3D

images are real may cause you to crush a nearby

object or get injured trying to move your body.

x

Do not use the 3D Active Glasses for any other

purpose than for which it was designed. Wearing the

with an HDMI/DVI for any other purpose (as general

spectacles, sunglasses, protective goggles, etc.)

may physically harm you or weaken your eyesight.

x

Immersive video can potentially have adverse effects

on the user including motion sickness, perceptual

after effects, disorientation, eye strain, and

decreased postural stability. Take frequent breaks to

lessen the potential of these effects, as is commonly

suggested for other items, such as keyboards and

computer monitors, that you may tend to fixate or

concentrate on. If your eyes show signs of fatigue or

dryness or if you have any of the above symptoms,

immediately discontinue use of this device and do

not resume using it for at least thirty minutes after

the symptoms have subsided.

x

The ideal viewing distance should be three times or

more the height of the screen. We recommend sitting

with viewer’s eyes on a level with the screen.

[UC7000_Aus]BN68-02831A-01Eng.indb 17 2010-03-16 오후 2:03:36

18

English

Basic Features

3D

This exciting new feature enables you to

view 3D content. In order to fully enjoy

this feature, you must purchase a pair of

Samsung 3D Active Glasses (SSG-2100AB,

SSG-2200AR, SSG-2200KR) to view 3D

video.

Samsung 3D Active Glasses are sold

separately. For more detailed purchasing

information, contact the retailer where you purchased this TV.

✎

If there is any obstacle between the emitter and 3D

Active Glasses, the proper 3D effect may not be

obtained.

■3D Mode: Select the 3D input format.

✎

If you want to feel the 3D effect fully, please wear

the 3D Active Glasses first, and then select 3D

mode from the list below that provides the best

3D viewing experience.

3D Mode Operation

Off Turns the 3D function off.

2D → 3D Changes a 2D image to 3D.

Side by Side Displays two images next to

each other.

Top & Bottom Displays one image above

another.

Line by Line Displays the images for the left

and right eye alternately in rows.

Vertical Stripe

Displays the images for the

left and right eye alternately in

columns.

Checker

Board

Displays the images for the

left and right eye alternately in

pixels.

Frequency

Displays the images for the

left and right eye alternately in

frames.

✎

“Side by Side” and “Top & Bottom” are available

when the resolution is 720p, 1080i and 1080p

in DTV, HDMI and USB mode or set to PC

connecting through HDMI/DVI cable.

✎

“Vertical Strip”, “Line by Line” and “Checker

Board” are available when the resolution is set to

PC connecting through HDMI/DVI cable.

✎

“Frequency” displays the frequency (60Hz only)

when the resolution is set to PC.

■3D → 2D (Off / On): Displays the image for the left eye only.

✎

This function is deactivated when 3D Mode set to

“2D → 3D” or Off.

■Depth: Adjusts focus / depth in “2D → 3D” mode.

✎

This function is only activated when the 3D Mode

is “2D → 3D”.

■Picture Correction: Adjusts the images for the left and

right eye.

■3D Auto View (Off / On): If 3D Auto View is set to On,

a “Side-By-Side” format HDMI signal with one of the

resolutions below is automatically switched to 3D. Here,

correct 3D information must be sent from the HDMI 1.3

transmitter.

✎

If a 3D failure occurs due to a 3D information error,

set 3D Auto View to Off and manually select a 3D

Mode using the 3D button or corresponding menu.

✎

Support resolution (16:9 only)

Resolution Frequency (Hz)

1280 x 720p 50 / 60 Hz

1920 x 1080i 50 / 60 Hz

1920 x 1080p 24 / 30 / 50 / 60 Hz

Resolution supported for HDMI PC mode

The resolution for HDMI PC mode is optimized to 1920 x

1080 input.

An input resolution other than 1920 x 1080 may not be

displayed properly in 3D display or full screen mode.

3D emitter

3D

[UC7000_Aus]BN68-02831A-01Eng.indb 18 2010-03-16 오후 2:03:37

19

English

03 Basic Features

How to watch the 3D image

1. Press the CONTENT button, then the Content View

menu will appear.

2. Press the ◄ or ► button, then select 3D.

To watch in 3D, wear 3D Active Glasses and press the

power button on the glasses.

3. Select OK, then press the ENTER

E

button.

4. Using the ◄ or ► buttons on your remote control,

selects the 3D Mode of the image you want to view.

✎

Some 3D modes may not be available depending

on the format of the image source.

Supported formats and operating specifications for

HDMI 1.4

Source signal format Standard HDMI 1.4 3D

1920x1080p@24Hz x 2 1920x2205p@24Hz

1280x720p@60Hz x 2 1280x1470p@60Hz

1280x720p@50Hz x 2 1280x1470p@50Hz

The mode is automatically switched to 3D mode for the 3D

video input in one of the formats above.

For the HDMI 1.4@24Hz format, the TV is optimized as

follows:

– Resolution First Display Mode: If Auto Motion

Plus is set to Off, Clear or Standard, you can

watch the video at a high resolution optimized to the

resolution of the source video.

– Judder Reduction Display Mode: When Auto

Motion Plus is set to Smooth or Custom, you can

watch a smooth picture without judder.

Before using 3D function...

✎

NOTE

x

When watching 3D images under a fluorescent lamp

(50Hz ~ 60Hz) or 3 wavelength lamp, you may notice

a small amount of screen flickering. If so, dim the

light or turn the lamp off.

x

3D mode is automatically disabled in following cases:

when changing a channel or the input source, or

accessing Media Play or Internet@TV.

x

Some Picture functions are disabled in 3D mode.

x

PIP and data broadcast is not supported in 3D

mode.

x

Auto Store and Manual Store is disabled in 3D

mode.

x

Data broadcasts (MHEG / MHP) are not supported

in 3D mode.

x

3D Active Glasses from other manufacturers may not

be supported.

x

When the TV is initially powered on, may take some

time until the 3D display is optimized.

x

If there is any other 3D product, electronic

devices such as a PDP or LCD TV, or wireless

communication devices nearby, the 3D Active

Glasses may not work properly due to mutual

interference. If there is a problem, keep other

electronic devices as far away as possible from the

3D Active Glasses.

x

When watching pictures from a 50Hz 3D source with

its Game mode On, visually-sensitive viewers may

see some flicker on bright images.

x

Photos of Media Play are shown in “2D → 3D”

mode only.

x

If lying on your side, the 3D-effects may not be

displayed.

3D

OK

To watch in 3D, wear 3D glasses and

press the power button on the glasses.

Viewing 3D TV motion pictures for long

periods may cause eye fatigue and/or

dizziness.

Cancel

U

Move

E

Enter

e

Exit

3D3D

Using the LEFT / RIGHT keys on the remote control,

select the icon suitable for the picture on screen.

Using the LEFT / RIGHT keys on the remote control,

select the icon suitable for the picture on screen.

U

Move

E

Enter

e

Exit

U

Move

E

Enter

e

Exit

[UC7000_Aus]BN68-02831A-01Eng.indb 19 2010-03-16 오후 2:03:38

20

English

Basic Features

Picture Reset (OK / Cancel)

Resets your current picture mode to its default settings.

¦Setting up the TV with Your PC

Set the input source to PC.

Auto Adjustment

t

Adjust frequency values/positions and fine tune the settings

automatically.

✎

Not available when connecting with an HDMI/DVI cable.

Screen

■Coarse / Fine: Removes or reduces picture noise. If the

noise is not removed by Fine-tuning alone, then adjust

the frequency as best as possible (Coarse) and Fine-

tune again. After the noise has been reduced, readjust

the picture so that it is aligned to the centre of screen.

■Position: Adjust the PC screen position with direction

button (▲ / ▼ / ◄ / ►).

■Image Reset: Resets the image to default settings.

Using Your TV as a Computer (PC) Display

Setting Up Your PC Software (Based on Windows XP)

Depending on the version of Windows and the video card,

the actual screens on your PC may differ in which case the

same basic set-up information will almost always be applied.

(If not, contact your computer manufacturer or Samsung

Dealer.)

1. Click on “Control Panel” on the Windows start menu.

2. Click on “Appearance and Themes” in the “Control

Panel” window and a display dialog-box will appear.

3. Click on “Display” and a display dialog box will appear.

4. Navigate to the “Settings” tab on the display dialog-box.

yThe correct size setting (resolution) [Optimum: 1920 X

1080 pixels]

yIf a vertical-frequency option exists on your display

settings dialog box, the correct value is “60” or “60 Hz”.

Otherwise, just click “OK” and exit the dialog box.

Sound Menu

¦Changing the Preset Sound Mode

SRS TheaterSound

t

■Standard: Selects the normal sound mode.

■Music: Emphasizes music over voices.

■Movie: Provides the best sound for movies.

■Clear Voice: Emphasizes voices over other sounds.

■Amplify: Increase the intensity of high-frequency sound

to allow a better listening experience for the hearing

impaired.

¦Adjusting Sound Settings

Equalizer

Adjusts the sound mode (standard sound mode only).

■Balance L/R: Adjusts the balance between the right and

left speaker.

■100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth

Adjustment): Adjusts the level of specific bandwidth

frequencies.

■Reset: Resets the equalizer to its default settings.

¦Sound Systems, Etc.

SRS TruSurround HD (Off / On)

(standard sound mode only)

This function provides a virtual 5.1 channel surround sound

experience through a pair of speakers using HRTF (Head

Related Transfer Function) technology.

SRS TruDialog (Off / On)

(standard sound mode only)

This function allows you to increase the intensity of a voice

over background music or sound effects so that dialog can

be heard more clearly.

Audio Language

(digital channels only)

Change the default value for audio languages.

✎

The available language may differ depending on the

broadcast.

[UC7000_Aus]BN68-02831A-01Eng.indb 20 2010-03-16 오후 2:03:38

21

English

03 Basic Features

Audio Format (MPEG / Dolby Digital 5.1)

(digital channels only)

When sound is emitted from both the main speaker and the

audio receiver, a sound echo may occur due to the decoding

speed difference between the main speaker and the audio

receiver. In this case, use the TV Speaker function.

✎

Audio Format option may differ depending on the

broadcast. 5.1ch Dolby digital sound is only available

when connecting an external speaker through an

optical cable.

Audio Description

(not available in all locations) (digital channels

only)

This function handles the Audio Stream

for the AD (Audio Description) which is

sent along with the Main audio from the

broadcaster.

■Audio Description (Off / On): Turn the

audio description function on or off.

■Volume: Adjust the audio description volume.

Auto Volume (Off / Normal / Night)

To equalize the volume level on each channel, set to Normal.

■Night: This mode provides an improved sound

experience compared to Normal mode, making almost

no noise. It is useful at night.

Speaker Select (External Speaker /

TV Speaker)

A sound echo may occur due to a difference in decoding

speed between the main speaker and the audio receiver. In

this case, set the TV to External Speaker.

✎

When Speaker Select is set to External Speaker, the

volume and MUTE buttons will not operate and the

sound settings will be limited.

✎

When Speaker Select is set to External Speaker

x

TV Speaker: Off , External Speaker: On

✎

When Speaker Select is set to TV Speaker

x

TV Speaker: On , External Speaker: On

✎

If there is no video signal, both speakers will be mute.

Additional Setting

■DTV Audio Level (MPEG / HE-AAC): This function

allows you to reduce the disparity of a voice signal

(which is one of the signals received during a digital TV

broadcast) to a desired level.

✎

According to the type of broadcast signal, MPEG

/ HE-AAC can be adjusted between -10dB and

0dB.

✎

To increase or decrease the volume, adjust

between the range 0 and -10 respectively.

■SPDIF Output: SPDIF (Sony Philips Digital InterFace)

is used to provide digital sound, reducing interference

going to speakers and various digital devices such as a

DVD player.

Audio Format: During the reception of a digital TV

broadcast, you can select the Digital Audio output

(SPDIF) format from the options PCM or Dolby Digital.

✎

By connecting to 5.1ch speakers in a Dolby

Digital setup, maximize your interactive 3D sound

experience.

Audio Delay: Correct audio-video sync problems, when

watching TV or video, and when listening to digital audio

output using an external device such as an AV receiver

(0ms ~ 250ms).

■Dolby Digital Comp (Line / RF): This function minimizes

signal disparity between a dolby digital signal and a

voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).

✎

Select Line to obtain dynamic sound, and RF

to reduce the difference between loud and soft

sounds at night time.

Line: Set the output level for signals greater or less than

-31dB (reference) to either -20dB or -31dB.

RF: Set the output level for signals greater or less than

-20dB (reference) to either -10dB or -20dB.

Sound Reset (OK / Cancel)

Reset all sound settings to the factory defaults.

¦Selecting the Sound Mode

t

When you set to Dual

f

-g, the current sound mode is

displayed on the screen.

Audio

Type Dual f-g Default

A2

Stereo

Mono Mono Automatic

change

Stereo Stereo ↔ Mono

Dual Dual f ↔ Dual g Dual f

NICAM

Stereo

Mono Mono Automatic

change

Stereo Mono ↔ Stereo

Dual Mono ↔ Dual f

 Dual g - Dual f

✎

If the stereo signal is weak and an automatic switching,

occurs, then switch to the mono.

✎

Only activated in stereo sound signal.

✎

Only available when the Input source is set to TV.

AD

[UC7000_Aus]BN68-02831A-01Eng.indb 21 2010-03-16 오후 2:03:39

22

English

Basic Features

Setup Menu

¦Setting the Time

Time

■Clock: Setting the clock is for using various timer

features of the TV.

O

The current time will appear every time you press

the INFO button.

✎

If you disconnect the power cord, you have to set

the clock again.

Clock Mode (Auto / Manual)

✎

Depending on the broadcast station and signal,

the auto time set up may not be correct. In this

case, set the time manually.

✎

The antenna must be connected in order to set

the time automatically.

Clock Set: Set the Day, Month, Year, Hour and Minute

manually.

✎

Available only when Clock Mode is set to

Manual.

Time Zone (Australia only): Select your time zone.

✎

This function is only available when the

Clock Mode is set to Auto.

¦Using the Sleep Timer

■Sleep Timer

t

: Automatically shuts off the TV

after a preset period of time. (30, 60, 90, 120, 150 and

180 minutes).

✎

To cancel Sleep Timer, select Off.

¦Setting the On / Off Timer

■Timer 1 / Timer 2 / Timer 3: Three different on / off

timer settings can be made. You must set the clock first.

On Time / Off Time: Set the hour, minute, and activate

/ inactivate. (To activate timer with the setting you’ve

chosen, set to Activate.)

Volume: Set the desired volume level.

Source: Select TV or USB content to be played when

the TV is turned on automatically. (USB can be selected

only when a USB device is connected to the TV)

Antenna (when the Source is set to TV): Select ATV or

DTV.

Channel (when the Source is set to TV): Select the

desired channel.

Contents (when the Source is set to USB): Select a

folder in the USB device containing music or photo files

to be played when the TV is turned on automatically.

✎

NOTE

x

If there is no music file on the USB device or the

folder containing a music file is not selected, the

Timer function does not operate correctly.

x

When there is only one photo file in the USB

device, the Slide Show will not play.

x

If a folder name is too long, the folder cannot be

selected.

x

Each USB you use is assigned its own folder.

When using more than one of the same type of

USB, make sure the folders assigned to each

USB have different names.

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,

Sat~Sun or Manual to set at you convenience. If you

select Manual, you can set up the day you want to

activate the timer.

✎

The

c

mark indicates the day is selected.

✎

Auto Power Off (available only when the TV is turned on

by Timer): The TV will be automatically turned off after 3

hours of being left idle to prevent overheating.

¦Locking Programmes

Security

✎

The PIN input screen appears before the setup screen.

✎

Enter your 4-digit PIN, the default of which is “0-0-0-0”.

Change the PIN using the Change PIN option.

■Child Lock (Off / On): Lock channels in

Channel Manager, to prevent unauthorized users, such

as children, from watching unsuitable programme.

✎

Available only when the Input source is set to TV.

■Parental Lock: Prevent unauthorized users, such as

children, from watching unsuitable programme with a

user-defined 4-digit PIN code. If the selected channel is

locked, the “

\

” symbol will be displayed.

Allow All: Unlock all TV ratings.

✎

The items of Parental Lock differs depending on

the country.

■Change PIN: Change your personal ID number required

to set up the TV.

✎

If you forget the PIN code, press the remote

control buttons in the following sequence, which

resets the PIN to “0-0-0-0”: POWER (off) →

MUTE → 8 → 2 → 4 → POWER (on).

10 TV ATV 1

00 00

▲

▼

00 00

▲

▼

Timer 1

On Time

Off Time

Volume

Inactivate

Inactivate

Sun Mon Tue Wed Thu Fri Sat

Once

Source Antenna Channel

Repeat

L

Move

U

Adjust

E

Enter

R

Return

[UC7000_Aus]BN68-02831A-01Eng.indb 22 2010-03-16 오후 2:03:40

23

English

03 Basic Features

¦Other Features

Language

■Teletext Language: Set a desired language for teletext.

✎

English is the default in cases where the selected

language is unavailable in the broadcast.

■Preference (Primary Audio Language / Secondary

Audio Language / Primary Subtitle Language /

Secondary Subtitle Language / Primary Teletext

Language / Secondary Teletext Language): Select

a language, which will be the default language when a

channel is selected.

Subtitle

Use this menu to set the Subtitle mode.

■Subtitle (Off / On): Switches subtitles

on or off.

■Mode (Normal / Hearing Impaired):

Sets the subtitle mode.

■Subtitle Language: Sets the subtitle

language.

✎

If the programme you are

watching does not support the Hearing Impaired

function, Normal automatically activates even if

the Hearing Impaired mode is selected.

✎

English is the default in cases where the selected

language is unavailable in the broadcast.

Digital Text (Disable / Enable)

(New Zealand only)

If the programme broadcasts with digital text, this feature is

enabled.

✎

NOTE

x

MHEG (Multimedia and Hypermedia Information

Coding Experts Group)

– An International standard for data encoding

systems used in multimedia and hypermedia. This

is at a higher level than the MPEG system which

includes data-linking hypermedia such as still

images, character service, animation, graphic and

video files as well as multimedia data. MHEG is

user runtime interaction technology and is being

applied to various fields including VOD (Video-

On-Demand), ITV (Interactive TV), EC (Electronic

Commerce), tele-education, tele-conferencing,

digital libraries and network games.

x

At present, the broadcasting station provides EPG

content only. Providing more content is scheduled

for the future.

x

If Digital Text is set to Disable, the EPG (Electronic

Program Guide) will not work.

Network (Network Type / Network Setup

/ Network Test / SWL(Samsung Wireless

Link) / SWL connect)

For details on set up options, refer to the “Network

Connection” instructions (p. 27).

General

■Game Mode (Off / On): When connecting to a game

console such as PlayStation™ or Xbox™, you can enjoy

a more realistic gaming experience by selecting game

mode.

✎

NOTE

x

Precautions and limitations for game mode

– To disconnect the game console and connect

another external device, set Game Mode to Off in

the setup menu.

– If you display the TV menu in Game Mode, the

screen shakes slightly.

x

Game Mode is not available when the input source

is set to TV or PC.

x

After connecting the game console, set Game Mode

to On. Unfortunately, you may notice reduced picture

quality.

x

If Game Mode is On:

– Picture mode is set to Standard and Sound mode

is set to Movie.

– Equalizer is not available.

■BD Wise (Off / On): Provides the optimal picture quality

for Samsung DVD, Blu-ray and Home Theatre products

which support BD Wise. When BD Wise is turned On,

the picture mode is automatically changed to the optimal

resolution.

✎

Available when connecting Samsung products

that support BD Wise through a HDMI cable.

■Menu Transparency (Bright / Dark): Se t the

Transparency of the menu.

■Melody (Off / Low / Medium / High): Set so that a

melody plays when the TV is turned on or off.

■FastStart (Off / On): When the TV is powered on, the

screen will come on quickly with this feature.

Wireless Remote Control

Turn wireless remote controls on or off or give permission to

wireless remote controls.

SUBT.

[UC7000_Aus]BN68-02831A-01Eng.indb 23 2010-03-16 오후 2:03:40

24

English

Basic Features

¦Picture In Picture (PIP)

PIP

t

You can watch the TV tuner and one external video source

simultaneously. PIP (Picture-in-Picture) does not function in

the same mode.

✎

NOTE

x

For PIP sound, refer to the Sound Select

instructions.

x

If you turn the TV off while watching in PIP mode, the

PIP window will disappear.

x

You may notice that the picture in the PIP window

becomes slightly unnatural when you use the main

screen to view a game or karaoke.

x

While Internet@TV is in operation, the PIP function

cannot be used.

x

PIP settings

Main picture Sub picture

Component, HDMI1/DVI,

HDMI2, HDMI3, HDMI4,

PC

TV

■PIP (Off / On): Activate or deactivate the PIP function.

■Channel: Select the channel for the sub-screen.

■Size (

Õ

/

Ã

/

À

/

Œ

): Select a size for the sub-

picture.

■Position (

Ã

/

–

/

—

/

œ

): Select a position for the

sub-picture.

✎

In Double (

À

,

Œ

) mode, Position cannot be

selected.

■Sound Select (Main / Sub): You can choose the

desired sound (Main / Sub) in PIP mode.

Support Menu

Self Diagnosis

✎

Self Diagnostic might take few seconds, this is part of

the normal operation of the TV

■Picture Test (Yes / No): Use to check for picture

problems.

■Sound Test (Yes / No): Use the built-in melody sound to

check for sound problems.

✎

If you hear no sound from the TV’s speakers,

before performing the sound test, make sure

Speaker Select is set to TV Speaker in the

Sound menu.

✎

The melody will be heard during the test even if

Speaker Select is set to External Speaker or the

sound is muted by pressing the MUTE button.

■Signal Information: (digital channels only) HDTV

channel’s reception quality is either perfect or the

channels are unavailable. Adjust your antenna to

increase signal strength.

■Troubleshooting: If the TV seems to have a problem,

refer to this description.

✎

If none of these troubleshooting tips apply, contact

the Samsung customer service centre.

Software Upgrade

Software Upgrade can be performed via a broadcasting

signal or by network connection or downloading the latest

firmware from “www.samsung.com,” to a USB memory

device.

Current Version the software already installed in the TV.

✎

Software is represented as “Year/Month/Day_Version”.

Software Upgrade

By USB ►

By Online

By Channel

Standby Mode Upgrade : 2 Hours Later

Alternative Software 2010/01/15_00000

U

Move

E

Enter

R

Return

Current Version 2010/01/18_000001

[UC7000_Aus]BN68-02831A-01Eng.indb 24 2010-03-16 오후 2:03:41

25

English

03 Basic Features

Installing the Latest Version

■By USB: Insert a USB

drive containing the

firmware upgrade file,

downloaded from

“www.samsung.com,”

into the TV. Please

be careful not to

disconnect the power

or remove the USB

drive until upgrades are

complete. The TV will be turned off and on automatically

after completing the firmware upgrade. When software is

upgraded, video and audio settings you have made will

return to their default settings. We advise you to to write

down your settings so that you can easily reset them

after the upgrade.

■By Online: Upgrade the software using the Internet.

✎

First, configure your network. For detailed

procedures on using the Network Setup, refer to

the “Network Connection” instructions.

✎

If the internet connection doesn’t operate properly,

the connection may be broken. Please retry

downloading. If the problem persists, download by

USB and upgrade.

■By Channel: Upgrade the software using the

broadcasting signal.

✎

If the function is selected during the software

transmission period, software will be automatically

searched and downloaded.

✎

The time required to download the software is

determined by the signal status.

■Standby Mode Upgrade: A manual upgrade will be

automatically performed at selected time. Since the

power of the unit is turned on internally, the screen

may be turned on slightly for the LED product. This

phenomenon may continue for more than 1 hour until

the software upgrade is complete.

■Alternative Software (backup): Displays the software

version downloaded through By Online. During the

software upgrading, When the Upgrade will discontinue

from last step, this function be activated.

HD Connection Guide

Refer to this information when connecting external devices

to the TV.

Contact Samsung

View this information when your TV does not work properly

or when you want to upgrade the software. You can find

information regarding our call centers and how to download

products and software.

USB Drive

TV Real Panel

(HDD)

or

[UC7000_Aus]BN68-02831A-01Eng.indb 25 2010-03-16 오후 2:03:41

26

English

Advanced Features

Connecting to a PC

Using an HDMI/DVI Cable / a D-sub Cable

(DVI )

AUDIO OUT

AUDIO OUT

PC OUT

DVI OUT

Display Modes (D-Sub and HDMI/DVI Input)

Optimal resolution is 1920 X 1080 @ 60 Hz.

Mode Resolution Horizontal Frequency

(KHz)

Vertical Frequency

(Hz)

Pixel Clock Frequency

(MHz)

Sync Polarity

(H / V)

IBM 640 x 350

720 x 400

31.469

31.469

70.086

70.087

25.175

28.322

+/-

-/+

MAC

640 x 480

832 x 624

1152 x 870

35.000

49.726

68.681

66.667

74.551

75.062

30.240

57.284

100.000

-/-

-/-

-/-

VESA CVT

720 x 576

1152 x 864

1280 x 720

1280 x 960

35.910

53.783

56.456

75.231

59.950

59.959

74.777

74.857

32.750

81.750

95.750

130.000

-/+

-/+

-/+

-/+

VESA DMT

640 x 480

640 x 480

640 x 480

800 x 600

800 x 600

800 x 600

1024 x 768

1024 x 768

1024 x 768

1152 x 864

1280 x 1024

1280 x 1024

1280 x 720

1280 x 800

1280 x 800

1280 x 960

1360 x 768

1440 x 900

1440 x 900

1680 x 1050

31.469

37.861

37.500

37.879

48.077

46.875

48.363

56.476

60.023

67.500

63.981

79.976

45.000

49.702

62.795

60.000

47.712

55.935

70.635

65.290

59.940

72.809

75.000

60.317

72.188

75.000

60.004

70.069

75.029

75.000

60.020

75.025

60.000

59.810

74.934

60.000

60.015

59.887

74.984

59.954

25.175

31.500

31.500

40.000

50.000

49.500

65.000

75.000

78.750

108.000

108.000

135.000

74.250

83.500

106.500

108.000

85.500

106.500

136.750

146.250

-/-

-/-

-/-

+/+

+/+

+/+

-/-

-/-

+/+

+/+

+/+

+/+

+/+

-/+

-/+

+/+

+/+

-/+

-/+

-/+

VESA GTF 1280 x 720

1280 x 1024

52.500

74.620

70.000

70.000

89.040

128.943

-/+

-/-

VESA DMT / DTV CEA 1920 x 1080p 67.500 60.000 148.500 +/+

✎✎

NOTE

x

For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.

x

The interlace mode is not supported.

x

The set might operate abnormally if a non-standard video format is selected.

x

Separate and Composite modes are supported. SOG (Sync On Green) is not supported.

[UC7000_Aus]BN68-02831A-01Eng.indb 26 2010-03-16 오후 2:03:43

27

English

04 Advanced Features

Advanced Features

Network Connection

You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless

connection.

¦Connecting to a Wired Network

You can attach your TV to your LAN using cable in three ways:

yYou can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a Cat

5 cable. See the diagram below.

yYou can attach your TV to your LAN by connecting the LAN port on the back of your TV to a IP Sharer which is connected

to an external modem. Use Cat 5 cable for the connection. See the diagram below.

yDepending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN

port on the back of your TV directly to a network wall outlet using a Cat 5 cable. See the diagram below. Note that the wall

outlet is attached to a modem or router elsewhere in your house.

If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration

Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway,

and DNS values your TV needs to access the Internet so you don’t have to enter them manually. Most home networks are

Dynamic Networks.

Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address,

subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network

connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If

you have a Windows computer, you can also get these values through your computer.

✎

You can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that

support DHCP also let you use Static IP addresses.

The Modem Port on the Wall TV Rear Panel

LAN Cable

LAN Adapter

LAN CableModem Cable

External Modem

(ADSL / VDSL / Cable TV) IP Sharer

(having DHCP server)

The Modem Port on the Wall TV Rear Panel

Modem Cable

External Modem

(ADSL / VDSL / Cable TV)

LAN AdapterLAN Cable

The LAN Port on the Wall TV Rear Panel

LAN Cable LAN Adapter

[UC7000_Aus]BN68-02831A-01Eng.indb 27 2010-03-16 오후 2:03:45

28

English

Advanced Features

Network Setup (Auto)

Use the Automatic Network Setup when connecting your

TV to a network that supports DHCP. To set up your TV’s

cable network connection automatically, follow these steps:

How to set up automatically

1. Connect your TV to your LAN as described in the

previous section.

2. Turn on your TV, press the MENU button on your

remote, use the ▲ or ▼ button to select Setup, and

then press the ENTER

E

button.

3. Use the ▲ or ▼ button to select Network in the Setup

menu, and then press the ENTER

E

button. The

Network screen appears.

4. On the Network screen, select Network Type.

5. Set Network Type to Wired.

6. Select Network Setup. The Network Setup screen

appears.

7. Set Internet Protocol Setup to Auto.

8. Auto acquires and enters the needed Internet values

automatically.

9 When done, press the RETURN button on your remote.

10. Select Network Test to check the Internet connectivity.

11. If the Network Function has not acquired the network

connection values, go to the directions for Manual.

Network Setup (Manual)

Use the Manual Network Setup when connecting your TV to

a network that requires a Static IP address.

Getting the Network Connection Values

To get the Network connection values on most Windows

computers, follow these steps:

1. Right click the Network icon on the bottom right of the

screen.

2. In the pop-up menu that appears, click Status.

3. On the dialog that appears, click the Support tab.

4. On the Support Tab, click the Details button. The

Network connection values are displayed.

How to set up manually

To set up your TV’s cable network connection manually,

follow these steps:

1. Follow Steps 1 through 6 in the “How to set up

automatically” procedure.

2. Set Internet Protocol Setup to Manual.

3. Press the ▼ button on your remote to go to the first

entry field.

4. Enter the IP Address, Subnet Mask, Gateway, and

DNS Server values. Use the number buttons on your

remote to enter numbers and the arrow buttons to move

from one entry field to another.

5. When done, press the RETURN button on your remote.

6. Select Network Test to check the Internet connectivity.

Network Setup

IP Address :

Subnet Mask :

Gateway :

DNS Setup : Auto

DNS Server :

U

Move

E

Enter

R

Return

Internet Protocol Setup : Auto ►

Network

U

Move

E

Enter

R

Return

Network Type : Wired ►

Network Setup

Network Test

SWL(Samsung Wireless Link) : Off

SWL connect

[UC7000_Aus]BN68-02831A-01Eng.indb 28 2010-03-16 오후 2:03:45

29

English

04 Advanced Features

¦Connecting to a Wireless Network

To connect your TV to your network wirelessly, you need a wireless router or modem and a Samsung Wireless LAN Adapter

(WIS09ABGN), which you connect to your TV’s back or side panel USB jack. See the illustration below.

Samsung’s Wireless LAN adapter is sold separately and is offered by selected retailers, E-commerce sites and Samsungparts.

com. Samsung’s Wireless LAN adapter supports the IEEE 802.11A/B/G and N communication protocols. Samsung

recommends using IEEE 802.11N. When you play the video over a IEEE 802.11B/G connection, the video may not play

smoothly.

✎

NOTE

x

You must use the “Samsung Wireless LAN Adapter” (WIS09ABGN) to use a wireless network.

x

Samsung’s Wireless LAN adapter is sold separately. The WIS09ABGN Wireless LAN adapter is offered by select

retailers, Ecommerce sites and Samsungparts.com.

x

To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports

DHCP, your TV can use a DHCP or static IP address to connect to the wireless network.

x

Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer

is currently being used by another device nearby, this will result in interference and communication failure.

x

If you apply a security system other than the systems listed blow, it will not work with the TV.

x

If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP-

AES (WPS2Mixed) for your AP, Samsung TVs will not support a connection in compliance with new Wi-Fi certification

specifications.

x

If your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button

Configuration) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA key in

either mode.

x

Keep the Samsung Wireless LAN Adapter at a distance from the TV. If you watch the TV with the adapter connected

nearby, images may appear corrupted for some channels.

x

If your router, modem, or device isn’t certified, it may not connect to the TV via the “Samsung Wireless LAN Adapter.”

x

Connection Methods: You can setup the wireless network connection six ways.

– Samsung Auto Configuration

– PBC (WPS)

– Auto Setup (Using the Auto Network Search function)

– Manual Setup

– SWL(Samsung Wireless Link)

– Ad-Hoc

x

All of Samsung Wireless LAN Adapter should be connected directly to the TV's USB port. USB HUB are not

supported.

✎

To use the SWL(Samsung Wireless Link) function, connect to the USB 1 (HDD) port.

The LAN Port on

the Wall

LAN Cable

Wireless IP sharer

(AP having DHCP server)

Samsung Wireless

LAN Adapter

or

TV Rear Panel

[UC7000_Aus]BN68-02831A-01Eng.indb 29 2010-03-16 오후 2:03:47

30

English

Advanced Features

Notice

The picture may appear corrupted or have static for some channels when the TV is connected to the Samsung Wireless LAN

Adapter. In such case, establish a connection using one of the following methods:

Method 1 Method 2

Connect using the USB right angle adapter Connect via an extension cable

or

Network Setup (Samsung Auto

Configuration)

This function is available in APs (Access Points) that support

Auto Configuration. If your AP does not support Auto

Configuration, you can connect through PBC (WPS), auto,

or manually.

✎

This function is available when

SWL(Samsung Wireless Link) is set to Off.

✎

You can check for equipment that supports Samsung

Auto Configuration on www.samsung.com.

How to set up using Samsung Auto Configuration

1. Place the AP and TV next to each other and turn them

on.

✎

Because the booting time of applications differ,

you may have to wait for approximately 2 minutes.

✎

If the LAN cable connected the WAN port of AP

during Samsung Auto Configuration, you are able

to complete until internet connection test. If you

do not connect, Samsung Auto Configuration will

check only device connecting of AP (Not check

internet).

2. After 2 minutes, connect the Samsung Wireless LAN

Adapter to the TV. When the Samsung Wireless LAN

Adapter is established, the pop-up window appears.

3. As soon as a connection is established, place the AP in

parallel with the Samsung Wireless LAN Adapter giving a

gap no larger than 25cm.

4. Wait until the connection is automatically established.

✎

If the connection fails, reset the AP and then try

again.

✎

If Samsung Auto Configuration does not connect

your TV to your AP, a pop-up window appears

on the screen notifying you of the failure. Reset

the AP, and then try again. If the connection fails

again, choose one of the other connection setup

methods, PBC (WPS), auto, or manual.

5. After the connection is established, locate the sharer at

the desired location.

✎

If the AP settings have been changed or it is the

first time you use the new AP after purchase, you

need to set up again beginning from Step 1.

[UC7000_Aus]BN68-02831A-01Eng.indb 30 2010-03-16 오후 2:03:48

31

English

04 Advanced Features

Network Setup (PBC (WPS))

How to set up using PBC (WPS)

If your router has a PBC (WPS) button, follow these steps:

1. Connect your TV to your LAN as described in the

previous section.

2. Turn on your TV, press the MENU button on your

remote, use the ▲ or ▼ button to select Setup, and

then press the ENTER

E

button.

3. Use the ▲ or ▼ button to select Network in the Setup

menu, and then press the ENTER

E

button.

4. On the Network screen, select Network Type.

5. Set Network Type to Wireless.

6. Select Network Setup. The Network Setup screen

appears.

7. Press the Red button on your remote.

8. Press the PBC (WPS) button on your router within 2

minutes. Your TV player automatically acquires all the

network setting values it needs and connects to your

network.

9. After the network connection is set up, press the

RETURN button to exit the Network Setup screen.

Network Setup (Auto)

Most wireless networks have an optional security system

that requires devices that access the network to transmit

an encrypted security code called an Access or Security

Key. The Security Key is based on a Pass Phrase, typically

a word or a series of letters and numbers of a specified

length you were asked to enter when you set up security for

your wireless network. If you use this method of setting up

the network connection, and have a Security Key for your

wireless network, you will have to enter the Pass Phrase

during the setup process.

How to set up automatically

To set up the wireless connection automatically, follow these

steps:

1. Follow Steps 1 through 6 in the “How to set up using

PBC (WPS)” procedure.

2. Press the ▼ button to select Internet Protocol Setup,

and then press the ENTER

E

button. Press the ▲ or

▼ button to select Auto, and then press the ENTER

E

button.

3. Press the ▲ button to go to Select a Network, and

then press the ENTER

E

button. The Network function

searches for available wireless networks. When done, it

displays a list of the available networks.

4. In the list of networks, press the ▲ or ▼ button to select

a network, and then press the ENTER

E

button.

✎

If the AP is set to Hidden (Invisible), you have

to select Add Network and enter the correct

Network Name (SSID) and Security Key to

establish the connection.

5. If the Security/PIN pop-up appears, go to Step 6. If the

Network Connecting Screen appears, go to Step 10.

6. Press the ▲ or ▼ button to select Security or PIN. For

most home networks, you would select Security (for

Security Key). The Security Screen appears.

7. On the Security screen, enter your network’s Pass

Phrase.

✎

You should be able to find the Pass Phrase on

one of the set up screens you used to set up your

router or modem.

A B C D E F G

H I J K L M N

O P Q R S T U

V W X Y Z

0~9

Network Setup

n

Move

E

Enter

R

Return

Security Key

0 entered

Number

Lower case

B

Delete

Space

Network Setup

PBC(WPS)

U

Move

E

Enter

R

Return

Select a network : Not Selected ►

Internet Protocol Setup : Auto

IP Address :

Subnet Mask :

Gateway :

DNS : Auto

DNS Server :

[UC7000_Aus]BN68-02831A-01Eng.indb 31 2010-03-16 오후 2:03:48

32

English

Advanced Features

8. To enter the Pass Phrase, follow these general

directions:

– Press the number buttons on your remote to enter

numbers.

– Use the direction buttons on your remote to move

from button to button on the Security Key screen.

– Press the Red button to change case or display

symbols/characters.

– To a enter letter or symbol, move to the letter or

symbol, and then press the ENTER

E

button.

– To delete the last letter or number you entered, press

the Green button on your remote.

9. When done, press the Blue button on your remote. The

Network Connecting screen appears.

10. Wait until the connection confirmation message is

displayed, and then press the ENTER

E

button. The

Network Setup screen re-appears.

11. To test the connection, press the RETURN button to

select Network Test, and then press the ENTER

E

button.

Network Setup (Ad-Hoc)

You can connect to a mobile device without an access point

through the “Samsung Wireless LAN Adapter” by using a

peer to peer network.

✎

This function is available when

SWL(Samsung Wireless Link) is set to Off.

How to connect to new Ad-hoc device

1. Follow Steps 1 through 6 in the “How to set up using

PBC (WPS)” (p. 31).

2. Choose Select a network. A list of devices/networks

appears.

3. While in the device list, press the Blue button on the

remote.

✎

The message Ad-hoc is a direct Wi-Fi

connection with cell phone or PC. The existing

network system may have limited functionality.

Do you want to change the network

connection? is displayed.

4. Input the generated Network Name (SSID) and

Security Key into the device you want to connect.

How to connect an existing Ad-hoc device

1. Follow Steps 1 through 6 in the “How to set up using

PBC (WPS)” (p. 31).

2. Choose Select a network. The Device/Network list

appears.

3. Select the device you want in the Device list.

4. If security key is required, input the security key.

✎

If network doesn’t operate normally, check

the Network Name (SSID) and Security Key

again. An incorrect Security Key may cause a

malfunction.

Network Setup (Manual)

If the other methods do not work, you need to enter the

Network setting values manually.

Getting the Network Connection Values

To get the Network connection values on most Windows

computers, follow these steps:

1. Right click the Network icon on the bottom right of the

screen.

2. In the pop-up menu, click Status.

3. On the dialog that appears, click the Support tab.

4. On the Support tab, click the Details button. The

Network settings are displayed.

How to set up manually

To enter the Network connection values manually, follow

these steps:

1. Follow Steps 1 through 6 in the “How to set up using

PBC (WPS)” (p. 31).

2. Press the ▼ button to select Internet Protocol Setup,

and then press the ENTER

E

button. Press the

▲ or ▼ button to select Manual, and then press the

ENTER

E

button.

3. Press the ▼ button to go to the first entry field (IP

Address).

4. Use the number buttons to enter numbers.

5. When done with each field, use the ► button to move

successively to the next field. You can also use the other

arrow buttons to move up, down, and back.

6. Enter the IP Address, Subnet Mask, and Gateway

values.

7. Press the ▲ or ▼ button to go to DNS.

8. Press the ▼ button to go to the first DNS entry field.

Enter the numbers as above.

9. When done, press the ▲ button to go to

Select a Network. Select your network, and then press

the ENTER

E

button.

10. Go to Step 4 in the “How to set up automatically” (p.

31), and follow the directions from that point on.

[UC7000_Aus]BN68-02831A-01Eng.indb 32 2010-03-16 오후 2:03:49

33

English

04 Advanced Features

SWL(Samsung Wireless Link)

This function lets you connect a Samsung device that

supports the PBC (WPS) to your TV. You can connect

devices to the TV even if a sharer is not connected to the TV.

✎

To use the Internet@TV, the AP (access point) must be

connected to the wireless network.

✎

If a Samsung Wireless LAN Adapter is connected to the

USB 2 port, the network may not operate normally. We

recommend to connecting it to the USB 1 (HDD) port.

✎

Only sharers using the 2.4 Ghz band are supported.

Sharers using the 5 Ghz band are not supported.

SWL connect

You can directly connect a device that supports the PBC

(WPS) to the TV.

✎

This function is available when

SWL(Samsung Wireless Link) is set to On.

How to connect Samsung Wireless Link

For the procedures to establish a connection, refer to the

following:

1. Follow Steps 1 through 5 in the “How to set up using

PBC (WPS)” (p. 31).

2. Select SWL(Samsung Wireless Link) by using the ▼

button and press the ENTER

E

button to turn it On.

3. Select SWL connect by using the ▼ button and press

the ENTER

E

button.

4. If the “Press the PBC button on the device which

supports PBC button to connect within 120

seconds” message appears, press the PBC button on

the device to connect.

✎

For more information, refer to the wireless network

setup manual of the device to be connected.

5. The device is connected. Go to Network Setup and

press the ENTER

E

button. You can configure the

network for the connected device.

✎

If the connection fails, please retry after 2 minutes.

If Your TV Fails to Connect to the Internet

Your TV may not be able to connect to the Internet

because your ISP has permanently registered the

MAC address (a unique identifying number) of your

PC or modem, which it then authenticates each time

you connect to the Internet as a way of preventing

unauthorized access. As your TV has a different MAC

address, your ISP can not authenticate its MAC address,

and your TV can not connect.

To resolve this problem, ask your ISP about the

procedures required to connect devices other than a PC

(such as your TV) to the Internet.

If your Internet service provider requires an ID or password

to connect to the Internet, your TV may not be able to

connect to the Internet. If this is the case, you must enter

your ID or password when connecting to the Internet.

The internet connection may fail because of a firewall

problem. If this is the case, contact your Internet service

provider.

If you cannot connect to the Internet even after you have

followed the procedures of your Internet service provider,

please contact Samsung Electronics at 1-800-SAMSUNG.

[UC7000_Aus]BN68-02831A-01Eng.indb 33 2010-03-16 오후 2:03:49

34

English

Advanced Features

Media Play

¦Connecting a USB Device

1. Turn on your TV.

2. Connect a USB device containing recorded tv, photo, music and/or movie fi les to

the USB 1 (HDD) or USB 2 jack on the side of the TV.

3. When USB is connected to the TV, popup window appears. Then you can select

Media Play.

¦Connecting to the PC through network

You can play pictures, music and videos saved on your PC through a network connection in the Media Play mode.

✎

If you use Media Play through saved file on your PC, you should download “PC Share Manager” and users manual from

“www.samsung.com.”

1. For more information on how to confi gure your network, refer to “Network Connection” (p. 27).

– You are recommended to locate both TV and PC in same subnet. The fi rst 3 parts of the subnet address of the TV and

the PC IP addresses should be the same and only the last part (the host address) should be changed. (e.g. IP Address:

123.456.789.**)

2. Using a LAN cable, connect between the external modem and the PC onto which the Samsung PC Share Manager

programme will be installed.

– You can connect the TV to the PC directly without connecting it through a Sharer (Router).

Enjoy photos, music and/or movie fi les saved on

a USB Mass Storage Class (MSC) device and/or

your PC.

MEDIA.P

USB Drive

TV Rear Panel

(HDD)

or

LAN Cable

PC TV Rear Panel

or

LAN

Samsung

Wireless

LAN Adapter

Wireless IP sharer

External Modem

(ADSL/VDSL/Cable TV)

LAN Cable Modem Cable

LAN

Adapter

SUM

Change Device View Devices

E

Enter

R

Return

MediaPlay

Recorded TV

[UC7000_Aus]BN68-02831A-01Eng.indb 34 2010-03-16 오후 2:03:51

35

English

04 Advanced Features

✎

No supported functions when connecting to the PC through network:

x

The Background Music and Background Music Setting functions.

x

Sorting files by preference in the Photos, Music, and Videos folders.

x

The



(REW) or

µ

(FF) button while a movie is playing.

✎

The Divx DRM, Multi-audio, embedded caption does not supported.

✎

Samsung PC Share manager should be permitted by the firewall programme on your PC.

✎

When you use Media Play mode through a network connection, According to functions of the provided server:

x

The sorting method may vary.

x

The scene search function may not be supported.

x

The Play Continuously function, which resumes playing of a video, may not be supported.

– The Play Continuously function does not support multiple users. (It will have only memorised the point where the

most recent user stopped playing.)

x

The ◄ or ► button may not work depending on the content information.

x

If you experience any file stuttering issue while playing a video over a wireless network, we recommend using a wired

network.

✎

It might not work properly with unlicenced multimedia files.

✎

Need-to-Know List before using Media Play

x

MTP (Media Transfer Protocol) is not supported.

x

The file system supports FAT16, FAT32 and NTFS.

x

Certain types of USB Digital camera and audio devices may not be compatible with this TV.

x

Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only

Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not

supported). Devices should be connected directly to the TV’s USB port.

x

Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.

SAMSUNG is not responsible for any data file damage or data loss.

x

Connect a USB HDD to the dedicated port, USB 1 (HDD) port.

x

Do not disconnect the USB device while it is loading.

x

The higher the resolution of the image, the longer it takes to display on the screen.

x

The maximum supported JPEG resolution is 15360X8640 pixels.

x

For unsupported or corrupted files, the “Not Supported File Format” message is displayed.

x

If the files are sorted by Basic View, up to 1000 files can be displayed in each folder.

x

MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management

(DRM) is a technology that supports the creation of content, the distribution and management of the content in an

integrated and comprehensive way, including the protection of the rights and interests of the content providers, the

prevention of the illegal copying of contents, as well as managing billings and settlements.

x

If more than 2 PTP devices are connected, you can only use one at a time.

x

If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high

power (more than 500mA or 5V) may not be supported.

x

If an over-power warning message is displayed while you are connecting or using a USB device, the device may not

be recognized or may malfunction.

x

If the TV has been no input during time set in Auto Protection Time, the Screensaver will run.

x

The power-saving mode of some external hard disk drives may be released automatically when connected to the TV.

x

If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.

x

If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is

not played, connect the USB device to the PC, format the device and check the connection.

x

If a file deleted from the PC is still found when Media Play is run, use the “Empty the Recycle Bin” function on the PC

to permanently delete the file.

[UC7000_Aus]BN68-02831A-01Eng.indb 35 2010-03-16 오후 2:03:52

36

English

Advanced Features

¦Screen Display

Move to the file you desired using the up/down/right/left buttons and then press the ENTER

E

or



(Play) button. The file is

played.

✎

Supports the View Devices and Home in Media Play homepage.

Recorded TV

To use the recording or Timeshift function, the connected USB device must be available for recording. Device format is

recommended to use USB HDD.

✎

During the Device formatting, do not disconnect the device while formatting is in progress. If you format the device, all

files will be deleted.

Playing Recorded TV Program

1. Press the ◄ or ► button to select Recorded TV, then press

the ENTER

E

button in the Media Play menu.

2. Press the ◄/►/▲/▼ button to select the desired file in the file

list.

3. Press the ENTER

E

button or



(Play) button.

– The selected file is displayed on the top with its playing time.

– During playing the recorded TV program, you can search

using the ◄ and ► button.

Using the Timeshift function

t

If you missed a live broadcast, you can see from the recorded broadcast using this feature.

When the Timeshift Mode is set to Auto, the TV stores the channel you watch currently to record automatically.

When the Timeshift Mode is set to Manual, if you press the



(Play) button, the TV stores the channel from the point of

view you want to record.

Jan.10.2010

Jan.10.2010

Jan.10.2010

Jan.10.2010

Jan.10.2010

Jan.10.2010

Jan.10.2010

Jan.10.2010

Jan.10.2010

Jan.10.2010

/Movie 01.avi 1/1

Movie 01.avi

SUM

Movie 03.avi

Movie 05.avi

Movie 07.avi

Movie 09.avi

Movie 02.avi

Movie 04.avi

Movie 06.avi

Movie 08.avi

Movie 10.avi

Select

Sorting

T

Tools

Information:

You can ascertain the selected

file name and the number of files

and page.

Sort List Section:

Displays sorting standard.

✎

Sorting standard is

different depending on the

contents.

Operation Buttons

Red (Change Device): Selects a connected device.

B

Green (Preference): Sets the file preference. (not supported in Basic view)

Yellow (Select): Selects multiple files from file list. Selected files are marked with a symbol.

Blue (Sorting): Selects the sort list.

T

Tools: Displays the option menu.

✎

Using the



(REW) or

µ

(FF) button, file list can move to next or previous page.

File List Section:

You can confirm the files

and groups that is sorted by

each category.

Videos

Page

Change Device

Play list

n

Move

E

Select

R

Return

Recorded TV / .../ American Chopper

1/8 Page

05/2010

[UC7000_Aus]BN68-02831A-01Eng.indb 36 2010-03-16 오후 2:03:53

37

English

04 Advanced Features

✎

NOTE

x

Recorded videos are DRM (digital rights management) protected and cannot be played on a PC or other TVs, nor can

they be played when the main board of the TV is changed.

x

Data broadcasts cannot be recorded.

x

The availability of both recording and the Timeshift Mode function may differ depending on picture quality and the

free space on the hard disk drive.

x

If you press the ▲ or ▼ button, you can see the current channel being on air, or can see the start point the recorded

broadcast.

x

The Timeshift Mode operates for a maximum of 90 minutes.

x

After the Timeshift Mode function has run for the maximum time, the time information will be fixed to “00:00:00.”

Note that if you have paused the recording the TV will automatically resume playback.

x

If the 5% free memory space limit of the USB storage device is reached, the current recording process will be closed.

x

When recording is performed by both the PVR (Personal Video Recorder) function and a device that supports the

HDMI-CEC feature, recording by the PVR function takes precedence.

x

During a playback or the Timeshift Mode, the picture will be displayed according to the display settings of the TV.

x

If you change the input source during recording, the screen will go blank until the change is completed.

x

An application which supports neither the recording nor the Timeshift Mode function will close automatically if you

try to use it during either function.

x

A message may appear in front of the application window indicating that the recording or the Timeshift Mode

function is closed.

x

Timeshift Mode function is not supported for radio channels.

x

The recording and the Timeshift Mode functions are disabled for channels locked with Child Lock.

x

If the USB device has failed the Device Performance Test, the USB device must go through the Device Format and

Device Performance Test again before you record with the Guide or Channel Manager.

x

The recording and Timeshift Mode functions can only be used with a USB storage device that completed the

Device Performance Test.

x

If you attempt the recording or Timeshift Mode function with a device that did not have the Device Performance Test,

the function will not start.

x

If you press



(REC) on the remote control while the Channel Manager screen is being displayed or record with

Timer Recording, the TV may start or stop recording 1 or 2 seconds later than you intended due to the time needed to

process the command.

x

If a USB device dedicated to recording is connected, existing Timeshift Mode or recording files that were saved

abnormally will automatically be deleted.

x

If you switch to external input mode during recording, the recording will continue but the



(REC) button will be

disabled.

x

If any function that turns off the TV (Sleep Timer, Off timer, etc.) is set for a time that conflicts with recording, the TV will

be turned off once the recording is complete.

[UC7000_Aus]BN68-02831A-01Eng.indb 37 2010-03-16 오후 2:03:54

38

English

Advanced Features

Videos

Playing Video

1. Press the ◄ or ► button to select Videos, then press the ENTER

E

button in the Media Play menu.

2. Press the ◄/►/▲/▼ button to select the desired file in the file list.

3. Press the ENTER

E

button or



(Play) button.

– The selected file is displayed on the top with its playing time.

– If video time information is unknown, play time and progress bar are not displayed.

– During playing the video, you can search using the ◄ and ► button.

✎

In this mode, you can enjoy movie clips contained on a Game,

but you cannot play the Game itself.

ySupported Subtitle Formats

Name File extension Format

MPEG-4 time-based text .ttxt XML

SAMI .smi HTML

SubRip .srt string-based

SubViewer .sub string-based

Micro DVD .sub or .txt string-based

ySupported Video Formats

File Extension Container Video Codec Resolution Frame rate

(fps)

Bit rate

(Mbsp) Audio Codec

*.avi

*.mkv

AVI

MKV

Divx 3.11 / 4.x / 5.1 / 6.0 1920x1080 6 ~ 30 8

MP3 / AC3 / LPCM /

ADPCM / DTS Core

XviD 1920x1080 6 ~ 30 8

H.264 BP / MP / HP 1920x1080 6 ~ 30 25

MPEG4 SP / ASP 1920x1080 6 ~ 30 8

Motion JPEG 800x600 6 ~ 30 8

*.asf ASF

Divx 3.11 / 4.x / 5.1 / 6.0 1920x1080 6 ~ 30 8

MP3 / AC3 / LPCM /

ADPCM / WMA

XviD 1920x1080 6 ~ 30 8

H.264 BP / MP / HP 1920x1080 6 ~ 30 25

MPEG4 SP / ASP 1920x1080 6 ~ 30 8

Motion JPEG 800x600 6 ~ 30 8

*.wmv ASF Window Media Video v9 1920x1080 6 ~ 30 25 WMA

*.mp4 MP4

H.264 BP / MP / HP 1920x1080 6 ~ 30 25

MP3 / ADPCM / AACMPEG4 SP / ASP 1920x1080 6 ~ 30 8

XVID 1920x1080 6 ~ 30 8

*.3gp 3GPP H.264 BP / MP / HP 1920x1080 6 ~ 30 25 ADPCM / AAC / HE-AAC

MPEG4 SP / ASP 1920x1080 6 ~ 30 8

*.vro VRO

VOB

MPEG1 1920x1080 24 / 25 / 30 30 AC3 / MPEG / LPCM

MPEG2 1920x1080 24 / 25 / 30 30

*.mpg

*.mpeg PS

MPEG1 1920x1080 24 / 25 / 30 30

AC3 / MPEG / LPCM / AACMPEG2 1920x1080 24 / 25 / 30 30

H.264 1920x1080 6 ~ 30 25

*.ts

*.tp

*.trp

TS

MPEG2 1920x1080 24 / 25 / 30 30

AC3 / AAC / MP3 / DD+ /

HE-AAC

H.264 1920x1080 6 ~ 30 25

VC1 1920x1080 6 ~ 30 25

Movie 01.avi

00:04:03 / 00:07:38 1/1

SUM

E

Chaptering

L

Jump

T

Tools

R

Return

[UC7000_Aus]BN68-02831A-01Eng.indb 38 2010-03-16 오후 2:03:55

39

English

04 Advanced Features

Other Restrictions

✎

NOTE

x

If there are problems with the contents of a codec, the codec will not be supported.

x

If the information for a Container is incorrect and the file is in error, the Container will not be able to play

correctly.

x

Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec

listed in the table above.

x

If the Index Table is in error, the Seek (Jump) function is not supported.

Video Decoder Audio Decoder

• Supports up to H.264, Level 4.1

• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not

supported.

• XVID, MPEG4 SP, ASP :

– Below 1280 x 720: 60 frame max

– Above 1280 x 720: 30 frame max

• GMC 2 over is not supported.

• H.263 is not supported.

• Only Samsung Techwin MJPEG is supported.

• Supports up to WMA 7, 8, 9, STD

• WMA 9 PRO does not support 2 channel excess multi channel or

lossless audio.

• WMA sampling rate 22050Hz mono is not supported.

Playing recorded TV or movie file continuously (Resume Play)

If you exit the playing Recorded TV or Videos function, it can be played later from the point where it was stopped.

✎

If you press the ENTER

E

button (Chaptering) during playing the file, you can explore scene divided into 5 chapters

you want.

1. Select the movie file you want to play continuously by pressing

the ◄ or ► button to select it from the file list section.

2. Press the



(Play) / ENTER

E

button.

3. Select Play Continuously (Resume Play) by pressing the Blue

button. The Movie will begin to play from where it was stopped.

✎

The Blue button is available when resuming play.

✎

If the Cont. movie play help function is set to On in the

Settings menu, a pop-up message will appear when you

resume play a movie file.

Music

Playing Music

1. Press the ◄ or ► button to select Music, then press the

ENTER

E

button in the Media Play menu.

2. Press the ◄/►/▲/▼ button to select the desired file in the file

list.

3. Press the ENTER

E

button or



(Play) button.

– During playing the music, you can search using the ◄ and ►

button.

–



(REW) and

µ

(FF) buttons do not function during play.

✎

Only displays the files with MP3 and PCM file extension. Other

file extensions are not displayed, even if they are saved on the

same USB device.

✎

If the sound is strange when playing MP3 files, adjust the Equalizer in the Sound menu. (An over-modulated MP3 file

may cause a sound problem.)

✎

You can create My Playlist selecting the desired music in the file, and can play My Playlist.

3/15

I Love you

Jhon

Music 1

No Singer

Music 2

No Singer

Music 3

No Singer

Music 4

No Singer

Music 5

No Singer

I Love You

Jhon

1st Album

Pop

2010

4.2MB

01:10 / 04:02

SUM

E

Pause

L

Jump

T

Tools

R

Return

Playlist

Movie 01.avi

00:04:03 / 00:07:38 1/1

SUM

Play Continuously

E

Chaptering

L

Jump

T

Tools

R

Return

Resumes playing from the last viewed

scene.

Play Continuously

[UC7000_Aus]BN68-02831A-01Eng.indb 39 2010-03-16 오후 2:03:57

40

English

Advanced Features

Photos

Viewing a Photo (or Slide Show)

1. Press the ◄ or ► button to select Photos, then press the

ENTER

E

button in the Media Play menu.

2.

Press the ◄/►/▲/▼ button to select the desired file in the file

list.

3. Press the ENTER

E

button or



(Play) button.

– While a photo list is displayed, press the



(Play) /

ENTER

E

button on the remote control to start slide show.

– All files in the file list section will be displayed in the slide show.

– During the slide show, files are displayed in order from

currently being shown.

✎

Music files can be automatically played during the Slide Show if the Background Music is set to On.

✎

The BGM Mode cannot be changed until the BGM has finished loading.

¦Playing the Multiple Files

Playing the selected recorded TV/video/music/photo files

1. Press the Yellow button in the file list to select the desired file.

2. Repeat the above operation to select multiple files.

✎

NOTE

x

The

c

mark appears to the left of the selected files.

x

To cancel a selection, press the Yellow button again.

x

To deselect all selected files, press the TOOLS button

and select Deselect All.

3. Press the TOOLS button and select Play Selected Contents.

Playing the recorded TV/video/music/photo file group

1. While a file list is displayed, move to the any file in desired group.

2. Press the TOOLS button and select Play Current Group.

¦Media Play Additional Function

Sorting the file list

Press the Blue button in the file list to sort the files.

Category Operations Recorded TV Videos Music Photos

Basic View It shows whole folder. You can view the photo by selecting the folder.

>>>

Title It sorts and displays the file title in Symbol/Number/Alphabet/Special order.

>>>>

Preference It sorts and displays the file by preference. You can change the file preference

in the file list section using the Green button.

> > > >

Latest Date It sorts and shows files by latest date.

>> >

Earliest Date It sorts and shows files by earliest date.

>> >

Artist It sorts the music file by artist in alphabetical.

>

Album It sorts the music file by album in alphabetical order.

>

Genre It sorts music files by the genre.

>

Mood It sorts music files by the mood. You can change the music mood information.

>

Monthly It sorts and shows photo files by month. It sorts only by month (from January

to December) regardless of year.

> >

Channel It sorts the recorded files by channel name.

>

1/1

/Movie 01.avi

SUM

Movie 01.avi

Jan.10.2010

Jan.10.2010

Jan.10.2010

Jan.10.2010

Jan.10.2010

Jan.10.2010

Jan.10.2010

Jan.10.2010

Jan.10.2010

Jan.10.2010

Movie 03.avi

Movie 05.avi

Movie 07.avi

Movie 09.avi

Movie 02.avi

Movie 04.avi

Movie 06.avi

Movie 08.avi

Movie 10.avi

Change Device

Select Sorting

T

Tools

Videos

2 les selected Page

Image1024.jpg 1024x768 2010/2/1 3/15

SUM

E

Pause

L

Previous/Next

T

Tools

R

Return

Normal

[UC7000_Aus]BN68-02831A-01Eng.indb 40 2010-03-16 오후 2:03:59

41

English

04 Advanced Features

Recorded TV/Videos/Music/Photos Play Option menu

During playing a file, press the TOOLS button.

Category Operations Recorded TV Videos Music Photos

Title You can move the other file directly.

>>

Repeat Mode You can play recorded TV, movie and music files repeatedly.

>> >

Picture Size You can adjust the picture size for preference.

>>

Picture Setting You can adjust the picture setting (p. 15~20).

>> >

Sound Setting You can adjust the sound setting (p. 20, 21).

>>>>

Subtitle Setting You can play the video file with Subtitle. This function only works if the

subtitles are the same file name as the video file.

> >

Audio Description You can adjust the audio description (p. 21).

>

Audio You can enjoy video in one of supported languages as required. The function

is only enabled when stream-type files which support multiple audio formats

are played.

> >

Stop Slide Show /

Start Slide Show

You can start or stop a slide show.

>

Slide Show Speed You can select the slide show speed during the slide show.

>

Slide Show Effect You can set variously the slide show effect.

>

Background Music You can set and select background music when watching a slide show.

>

Zoom You can zoom into images in full screen mode.

>

Rotate You can rotate images in full screen mode.

>

Home Background You can move the file to the Media Play desktop.

>

Information You can see detailed information about the played file.

>>>>

Settings

Using the Setup Menu

■Background Setting: Select to display the background you want.

■Cont. movie play help (Resume Play) (On / Off): Select to display the help pop-up message for continuous movie

playback.

■Get the DivX® VOD registration code: Shows the registration code authorized for the TV. If you connect to the DivX web

site and register the registration code with a personal account, you can download VOD registration file. If you play the VOD

registration using Media Play, the registration is completed.

✎

For more information on DivX® VOD, visit “www.DivX.com.”

■Get the DivX® VOD deactivation code: When DivX® VOD is not registered, the registration deactivation code is

displayed. If you execute this function when DivX® VOD is registered, the current DivX® VOD registration is deactivated.

■Information: Select to view information about the connected device.

[UC7000_Aus]BN68-02831A-01Eng.indb 41 2010-03-16 오후 2:04:00

42

English

Advanced Features

Anynet+

What is Anynet+?

t

Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung

TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your

Samsung device has this feature, check if there is an Anynet+ logo on it.

To connect to Home Theatre

1. Connect the HDMI IN (1(DVI), 2(ARC), 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+

device using an HDMI cable.

2. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using an

HDMI cable.

✎

NOTE

x

Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input

on the Home Theatre.

x

The ARC function enables digital output of sound using the HDMI IN 2(ARC) port and can only be operated when the

TV is connected to an audio receiver that supports the ARC function.

x

When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound

from the Home Theatre’s Front, Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio,

connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / satellite box (i.e. Anynet Device 1 or 2) directly to the

Amplifier or Home Theatre, not the TV.

x

Connect only one Home Theatre.

x

You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.

x

Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.

x

Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.

Home Theatre

Anynet+

Device 1

Anynet+ Device

2, 3, 4

(DVI)

HDMI Cable HDMI Cable

HDMI Cable

Optical

Adapter Optical

Cable

TV

[UC7000_Aus]BN68-02831A-01Eng.indb 42 2010-03-16 오후 2:04:00

43

English

04 Advanced Features

Anynet+ Menu

The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.

Anynet+ Menu Description

View TV Changes Anynet+ mode to TV broadcast mode.

Device List Shows the Anynet+ device list.

(device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of

the DVD recorder will appear.

(device_name) INFO Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the

play menu of the DVD recorder will appear.

Recording: (*recorder) Starts recording immediately using the recorder. (This is only available for devices that

support the recording function.)

Stop Recording: (*recorder) Stops recording.

Receiver Sound is played through the receiver.

If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is

connected, it will be represented as (*device_name).

¦Setting Up Anynet+

■Setup

Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.

✎

When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.

Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.

✎

The active source on the TV must be set to TV to use the Anynet+ function.

✎

Even if an external device is still recording, it may turn off.

¦Switching between Anynet+ Devices

1. Anynet+ devices connected to the TV are listed.

✎

If you cannot find a device you want, press the red button to refresh the list.

2. Select a device and press the ENTER

E

button. You can switch to the selected device.

✎

Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the Device List menu appears.

x

Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching

operation.

x

If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function.

Make sure to switch to an Anynet+ device by using the Device List.

[UC7000_Aus]BN68-02831A-01Eng.indb 43 2010-03-16 오후 2:04:01

44

English

Advanced Features

¦Recording

You can make a recording of a TV programme using a Samsung recorder.

1. Select Recording.

✎

When there are more than two recording devices

x

When multiple recording devices are connected, the recording devices are listed. Select one recording device in

the Device List.

✎

When the recording device is not displayed, select Device List and press the Red button to search devices.

2. Press the EXIT button to exit.

✎

You can record the source streams by selecting Recording: (device_name).

✎

Pressing the



(REC) button will record whatever you are currently watching. If you are watching video from

another device, the video from the device is recorded.

✎

Before recording, check whether the antenna jack is properly connected to the recording device. To properly

connect an antenna to a recording device, refer to the recording device’s users manual.

¦Listening through a Receiver

You can listen to sound through a receiver (i.e Home Theatre) instead of the TV Speaker.

1. Select Receiver and set to On.

2. Press the EXIT button to exit.

✎

If your receiver supports audio only, it may not appear in the device list.

✎

The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO

OUT (OPTICAL) jack of the TV.

✎

When the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the

TV is displaying a DTV (aerial) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a

digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from

the receiver.

✎

NOTE

x

You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.

x

The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.

x

The Anynet+ functions do not operate with other manufacturers’ products.

Using the ARC function

You can listen to sound through a receiver connected HDMI cable without the need for a separate optical cable.

1. Select Receiver and set to On.

2. Press the EXIT button to exit.

✎

To use the ARC function, a receiver which supports the HDMI-CEC and ARC features must be connected to the

HDMI IN 2(ARC) port.

✎

To disable the ARC function, set the Receiver to Off. Even if the TV transmits the ARC signal continuously, the

receiver will be blocked from receiving the signal.

[UC7000_Aus]BN68-02831A-01Eng.indb 44 2010-03-16 오후 2:04:01

45

English

04 Advanced Features

¦Troubleshooting for Anynet+

Problem Possible Solution

Anynet+ does not work. • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.

• Connect only one receiver (home theatre).

• Check if the Anynet+ device power cord is properly connected.

• Check the Anynet+ device’s Video/Audio/HDMI Cable connections.

• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.

• Check whether the TV remote control is in TV mode.

• Check whether it is Anynet+ exclusive remote control.

• Anynet+ doesn’t work in certain situations. (Searching channels, operating Media Play or Plug & Play (Initial

setup), etc.)

• When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off

and on again.

• Check if the Anynet+ Function of Anynet+ device is set on.

I want to start Anynet+. • Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to

On in the Anynet+ Setup menu.

• Presshe TOOLS button to display the Anynet+ menu and select a menu you want.

I want to exit Anynet+. • Select View TV in the Anynet+ menu.

• Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices.

• Press P

>

/

<

, and PRE-CH to change the TV mode. (Note that the channel button operates only when a

tuner-embedded Anynet+ device is not connected.)

The message “Connecting to

Anynet+ device...” appears on the

screen.

• You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.

• Use the remote control when the Anynet+ setting or switching to view mode is complete.

The Anynet+ device does not play. • You cannot use the play function when Plug & Play (Initial setup) is in progress.

The connected device is not

displayed.

• Check whether or not the device supports Anynet+ functions.

• Check whether or not the HDMI Cable is properly connected.

• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.

• Search Anynet+ devices again.

• You can connect an Anynet+ device using the HDMI Cable only. Some HDMI cables may not support Anynet+

functions.

• If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power

failure, please repeat the device scan.

The TV programme cannot be

recorded.

• Check whether the antenna jack on the recording device is properly connected.

The TV sound is not output

through the receiver.

• Connect the optical cable between TV and the receiver.

• The ARC function enables digital output of sound using the HDMI IN 2(ARC) port and can only be operated

when the TV is connected to an audio receiver that supports the ARC function.

[UC7000_Aus]BN68-02831A-01Eng.indb 45 2010-03-16 오후 2:04:01

46

English

Advanced Features

Internet@TV

¦Getting Started with Internet@TV

✎

NOTE

x

Configure the network settings before using Internet@TV. For more information, refer to “Network Connection” (p.

27).

x

Unsupported fonts within the provider’s content will not display normally.

x

Slow responses and/or interruptions may occur, depending on your network conditions.

x

English may be only supported in application service depending on region.

x

This feature is not available in some locations.

x

If you experience a problem using a widget, please contact the content provider.

x

According to circumstances of the contents provider, an application’s updates or the application itself may be

discontinued.

x

Depending on your country’s regulations, some widgets may have limited service or not be supported.

Screen Display

INTERNET

@ TV

Internet@TV brings useful and entertaining

contents and services directly from the web to

your TV.

Login

B

Mark as Favourite

Sort by

R

Return

My Applications

Recommended

by Date 1/1

Settings

Samsung Apps

Recommended Applications:

Displays the recommended service by

Samsung. You are not able to add or

delete a service in this list.

Downloaded Applications:

Displays the downloaded applications

through the Samsung Apps.

TV Screen:

Displays the current channel.

Information:

Displays notices, new

applications, and

advertisements brought to

you by Samsung product

introductions.

Application service:

You can experience

various service by provided

samsung.

Internet@TV Settings:

Edit and confi gure applications

and Internet@TV settings.

Controls:

• Red (Login): To log in to Internet@TV.

•

B

Green (Mark as Favourite): To mark the applications as a favourite.

• Blue (Sort by): To sort the applications.

•

R

Return: To return to the previous menu.

✎

The colour buttons may work differently depending on the application.

Recommended

Samsung Apps Settings

My Applications

Login

B

Mark as Favourite Sort by R Return

by Date 1/1

[UC7000_Aus]BN68-02831A-01Eng.indb 46 2010-03-16 오후 2:04:03

47

English

04 Advanced Features

Account Login

For a widget with multiple account, use ◄ and ► to access

the different account.

✎

For a more enjoyable widget experience, register and

log in to your account.

✎

For instructions on creating an account, refer to

Settings → Internet@TV ID → Create.

1. Press the Red button in Internet@TV home page.

2. Select desired User account, then press the ENTER

E

button.

✎

If you want create account, press Red button;

then create account OSD window appear.

3. Enter the Password.

✎

When login succeeds, User account will be

displayed on the screen.

¦Setting up Internet@TV

Settings

Create IDs and configure Internet@TV settings from this

screen. Highlight Settings using ▲ and ▼ buttons and press

the ENTER

E

button.

■System Setup

Ticker Autorun (Off / On): Enable/disable ticker autorun

upon powering on the TV.

✎

The Ticker application provides useful News,

Weather, and Stock Market information. The

Ticker application on Internet@TV must be

downloaded to use this feature.

✎

Depending on your country, the Ticker application

may have different service or not be supported.

Channel Bound Service (Off / On): Some channels

support widgets as an Internet data service, allowing you

to access the Internet service while watching TV.

✎

Only available if supported by the broadcaster.

Change the Service Lock password

✎

The default password set is “0-0-0-0.”

✎

If you forget the password, press the following

sequence of remote control buttons to reset the

password to “0-0-0-0”: POWER (off) → MUTE →

8 → 2 → 4 → POWER (on).

Reset: Resets Internet@TV settings to factory default

settings.

■Internet@TV ID

You can use this menu when creating, deleting the

account. You can control your account including

contents site’s account information.

✎

Account is only for internet@TV.

Create: Create an account and link it with desired

service widgets.

✎

NOTE

x

Account will be made less than 10.

x

Maximum number of characters is 8.

Manager

– Service Site: Register login information for service

sites.

– Change Password: Change account password.

– Delete: Delete the account.

■Service Manager: Delete and lock widgets installed to

Internet@TV.

Lock: Lock the widget.

✎

Accessing a locked widget requires the password.

Delete: Delete the widget.

■Properties: Display information about Internet@TV. Use

the Check the speed of your internet connection

option to test your network connection.

R

Return

Settings

▪ System setup

▪ Internet@TV ID

▪ Service Manager

▪ Properties

▪ Ticker Autorun : Off

▪ Channel Bound Service : Off

▪ Change the Service Lock password

▪ Reset

admin

Login

User account :

Password :

Create [0~9] Enter PIN

R

Cancel

[UC7000_Aus]BN68-02831A-01Eng.indb 47 2010-03-16 오후 2:04:04

48

English

Advanced Features

¦Using the Internet@TV service

Samsung Apps

Samsung Apps is a store for downloading applications to be

used on Samsung TV/AV equipment.

Users can enjoy a variety of contents like videos, music,

photos, games, useful information etc. using the downloaded

applications.

Additional applications will be available hereafter.

✎

Using the colour buttons with the Samsung Apps.

x

Red (Login): To log in to the internet service.

x

B

Green (Thumbnail View): To change the view

mode.

x

Blue (Sort By): To sort the widgets by Featured,

Most downloaded, Most recent or Name.

xR

Return: Moves to previous menu.

Using the Samsung Apps by category

The following categories are available:

yWhat’s New?: Displays newly registered applications.

yVideo: Displays various video media such as movies, TV

shows and short length videos.

ySports: Displays various sports media such as match

information, images and short length video.

yGame: Displays various games such as sudoku and

chess.

yLifestyle: Includes various lifestyle media services such

as music, personal photo management tools and social

networking such as Facebook and Twitter.

yInformation: Includes various information services such

as news, stocks and weather.

yOther: Includes other miscellaneous services.

yMy Page: My Page offers information about already

installed applications on the TV like detailed information,

download contents etc. It can allows delete or lock the

applications.

yHelp: If you have questions about Internet@TV, check

this section first.

Skype

Skype created a little piece of software that makes

communicating with people around the world easy and

fun. With Skype you can say hello or share a laugh with

anyone, anywhere. And if both of you are on Skype, it’s free.

Communicate with people around the world!

✎

For more information, download the Skype user's

manual from “www.samsung.com.”

You Tube

Login

B

Thumbnail View

Sort By

R

Return

Samsung Apps

What’s New!?

Video

Sports

Game

Lifestyle

Information

Other

My Page

Help

Featured Most downloaded Most recent Name

YouTube

TV store Test User002

Free

Sign Out

B

Online Status Add a Contact

Camera Off

R

Return

Welcome to Skype!

My Video

Jonh001

Mother

Skype Credit 2.03 EUR

Contact

Video

Father

sister

brother

Uncle

Son

Call

[UC7000_Aus]BN68-02831A-01Eng.indb 48 2010-03-16 오후 2:04:05

49

English

04 Advanced Features

Troubleshooting for internet@TV

Problem Possible Solution

Some application contents only

have English. How can I change the

language?

Application content language may be different from application user interface

language.

It depends on service provider.

Some application services do not work. Check with that service provider.

Refer to help website for application service provider information.

When a network error occurred, I can’t

use other menus except setting menu.

If network connection doesn’t work, your service might be limited.

Because all of function except setting menu are needed to connect internet.

Help Website

✎

Approaching step may be changed later on.

✎

It can be different links for special countries.

Country Website

UAE www.samsung.com → Consumer → television → Internet@TV

Australia www.samsung.com → Consumer → television → Internet@TV

China www.samsung.com → 个人消费产品 → 电视产品 → Internet@TV

India www.samsung.com → consumer products → television → Internet@TV

Indonesia www.samsung.com → Produk → television → Internet@TV

Japan www.samsung.com → 製品情報 → 液晶ディスプレイ → Internet@TV

Malaysia www.samsung.com → Consumer → television → Internet@TV

NewZealand www.samsung.com → Consumer → television → Internet@TV

Philippines www.samsung.com → Consumer → television → Internet@TV

Singapore www.samsung.com → Consumer → television → Internet@TV

Taiwan www.samsung.com → 個人消費産品 → 電視 → Internet@TV

Thailand www.samsung.com → ผลิตภัณฑ์ → โทรทัศน์ → Internet@TV

Vietnam www.samsung.com → sản phẩm nghe nhìn → máy thu hình → Internet@TV

South Africa www.samsung.com → Consumer → television → Internet@TV

[UC7000_Aus]BN68-02831A-01Eng.indb 49 2010-03-16 오후 2:04:06

50

English

Advanced Features

AllShare

¦About AllShare

AllShare connects your TV, mobile phones and other

devices which are compatible through a network. On your

TV, you can view call arrivals, SMS messages and schedules

set on your mobile phones. In addition, you can play media

contents including videos, photos and music saved on your

mobile phones or the other devices (such as your PC) by

controlling them on the TV via the network. Additionally, you

can use your TV as a monitor for your mobile when browsing

a web page.

✎

For more information, visit “www.samsung.com” or

contact the Samsung call centre. Mobile devices may

need additional software installation. For details, refer to

each device's user’s guide.

¦Setting Up AllShare

Setup

■Message (On / Off): Enables or disables the message

function (for call arrivals, SMS messages and schedules

set on your mobile phones).

■Media (On / Off): Enables or disables the media

function. When the media function is on, it plays videos,

photos and music from a mobile phone or other device

that supports AllShare.

■ScreenShare (On / Off): Enables or disables the

ScreenShare function for using mobile phone as a

remote control.

■TV name: Sets the TV name so you can find it easily on

a mobile device.

✎

If you select User Input, you can type on the TV

using the OSK (On Screen Keyboard).

Message / Media / ScreenShare

Shows a list of mobile phones or connected devices which

have been set up with this TV for using the Message,

Media, or ScreenShare function.

✎

The Media function is available in all mobile devices

which support AllShare.

■Allowed / Denied: Allows/Blocks the mobile phone.

■Delete: Deletes the mobile phone from the list.

✎

This function only deletes the name of the mobile

from the list. If the deleted mobile device is turned

on or trys to connect to the TV, it may appear on

the list again.

Using the Message Function

Using this function, you view call arrivals, SMS messages

and schedules set on the mobile phone through the alarm

window while watching TV.

✎

NOTE

x

To disable the alarm window, set Message to Off in

Setup of AllShare.

x

If OK is selected, or if OK is not selected after the

message has appeared three times, the message

will be deleted. The message is not deleted from the

mobile phone.

x

The alarm window can be displayed while using

some applications such as Media Play etc. To view

the contents of a message, switch to TV viewing

mode.

x

When a message from an unknown mobile phone is

displayed, select the mobile phone on the message

menu in AllShare and select Denied to block the

phone.

Message View

If a new SMS message arrives while you are watching

TV, the alarm window appears. If you click the OK

button, the contents of the message are displayed.

✎

You can configure the viewing settings for SMS

messages on your mobile phones. For the

procedures, refer to the mobile phone manual.

✎

Some types of characters may be displayed as

blank or broken characters.

AllShare™

3/7

E

Select

R

Return

e

Exit

Setup

R

Return

Setup

Message

Media

ScreenShare

Message : On

Media : On

ScreenShare : On

TV name : Home TV

[UC7000_Aus]BN68-02831A-01Eng.indb 50 2010-03-16 오후 2:04:07

51

English

04 Advanced Features

Call Arrival Alarm

If a call arrives while you are watching TV, the alarm

window appears.

Schedule Alarm

While you are watching TV, the alarm window appears to

display the registered event.

✎

You can configure viewing settings for schedule

contents on your mobile phones. For the

procedures, refer to the mobile phone manual.

✎

Some special characters may be displayed as

blank or broken characters.

Using the Media Function

An alarm window appears informing the user that the media

contents (videos, photos, music) sent from a mobile phone

will be displayed on your TV. The contents are played

automatically 3 seconds after the alarm window appears.

If you press the RETURN or EXIT button when the alarm

window appears, the media contents are not played.

✎

NOTE

x

If the media function executes for the first time,

the warning popup window appears. Press the

ENTER

E

button to select Allow, then you can use

Media function on that device.

x

To turn off the media contents transmission from

the mobile phone, set Media to Off in the AllShare

setup.

x

Contents may not be played on your TV depending

on their resolution and format.

x

The ENTER

E

and ◄ / ► buttons may not work

depending on the type of media content.

x

Using the mobile device, you can control the media

playing. For details, refer to each mobile’s user’s

guide.

x

When you want to play media contents from

your PC, select the PC icon on the main display

of AllShare. Then the TV’s Media Play menu

automatically changes. For more detail information,

refer to “Media Play” (p. 34).

Using ScreenShare Function

Screenshare displays the same web page as provide in

mobile. Using ScreenShare, you can open the various

contents saved in a mobile phone. For example, the image

below displays an access page for contents from a mobile.

You can read the mobile’s various files and view the phone

book and calender on the TV. Also, in phone book, you can

make a call to other person, or can send to SMS.

✎

NOTE

x

In Samsung mobile, ScreenShare must be installed

and the supporting application must be executed;

then you can use the ScreenShare function.

x

Available buttons on your remote control may vary

for each page.

x

Doc Viewer can read files in doc format, but cannot

modify them.

x

The screen display may differ depending on the

connected device.

Using your Samsung phone to control your TV Simply

Before you can use this feature, you must connect to

a Samsung mobile phone that supports ScreenShare

functions. When operating the TV with your mobile phone,

only the POWER,

Y

, P

<

/

>

and MUTE buttons are

supported.

✎

Even if you keep pressing down on a control button

(channel or volume) on the mobile phone, the value will

only go up or down by one unit.

E

Select Return

My Mobile

Contacts Calendar Doc Viewer

DenyAllow

“Unknown Device 0” is requesting that the media le be allowed to play.

If you wish to allow the media le to be played at your device, please press

“Allow”, otherwise press “Deny”.

You can also change the setting (or resetting) of this feature at “AllShare

Setup”.

Warning: Please note that if your device is connected to unsecured or

unfamiliar network, unwanted or inappropriate contents might be played.

If you are not sure about the network's identity or content’s appropriateness,

we strongly recommend that you do not “Allow” the request to play.

[UC7000_Aus]BN68-02831A-01Eng.indb 51 2010-03-16 오후 2:04:08

52

English

Other Information

Analogue Channel Teletext Feature

The index page of the Teletext service gives you information on how to use the service. For Teletext information to be displayed

correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed.

✎

You can change Teletext pages by pressing the numeric buttons on the remote control.

Other Information

1

/

(Teletext on/mix): Activates

the Teletext mode for the current

channel. Press it twice to overlap

the Teletext display onto the

current broadcasting screen.

2

8

(store): Stores the Teletext

pages.

3

4

(size): Displays the teletext

on the upper half of the screen in

double-size. To move the text to

the lower half of the screen, press

it again. For normal display, press

it once again.

4

9

(hold): Holds the display at

the current page, in the case that

there are several secondary pages

that follow automaticially. To undo,

press it again.

5Colour buttons (red, green, yellow,

blue): If the FASTEXT system

is used by the broadcasting

company, the different topics on

a Teletext page are colour-coded

and can be selected by pressing

the coloured buttons. Press the

colour corresponding to the topic

of your choice. A new colour-

coded page is displayed. Items

can be selected in the same way.

To display the previous or next

page, press the corresponding

coloured button.

6

0

(mode): Selects the Teletext

mode (LIST/ FLOF).

If pressed during LIST mode,

switches the mode to List save

mode. In List save mode, you can

save a Teletext page into a list

using the

8

(store) button.

7

1

(sub-page): Displays the

available sub-page.

2

(page up): Displays the next

Teletext page.

8

3

(page down): Displays the

previous Teletext page.

9

6

(index): Displays the index

(contents) page at any time while

you are viewing Teletext.

0

5

(reveal): Displays the hidden

text (answers to quiz games, for

example). To display the normal

screen, press it again.

!

7

(cancel): Shrinks the Teletext

display to overlap with the current

broadcast.

@

Typical Tetetext page

Part Contents

ASelected page

number.

BBroadcasting channel

identity.

CCurrent page number

or search indications.

DDate and time.

EText.

FStatus information.

FASTEXT information.

PRE-CH

INTERNET

@

T

V

CO

NTEN

T

MEDIA

.

P

P

.

S

IZ

E

SU

BT.

A B C D

3

D

AD

TTX/MIX

G

UID

E

CH LIST

MUTE

TOOLS INFO

RETURN

EXIT

MENU

P

O

WE

R

SOURCE

O

N/

O

F

F

6

7

8

9

!

@

0

1

3

2

4

5

[UC7000_Aus]BN68-02831A-01Eng.indb 52 2010-03-16 오후 2:04:09

53

English

05 Other Information

Assembling the Cables

Stand Type

Enclose the cables in the Cable Tie so that the cables are not visible through the transparent stand.

3

1

2

1

2

3

Wall-Mount Type

✎

Do not pull the cables too hard when arranging them. This may cause damage to the product’s connection terminals.

Installing the Wall Mount

Assembling the Blanking Bracket

When installing the TV onto a wall, attach the Blanking Bracket as shown.

Blanking Bracket

[UC7000_Aus]BN68-02831A-01Eng.indb 53 2010-03-16 오후 2:04:11

54

English

Other Information

Preparing before installing Wall-Mount

To install a wall-mount from another manufacturer, use the Holder-Ring.

To install a wall-mount, use the Holder-Ring 1.

Installing the Wall Mount Kit

The wall mount kit (sold separately) allows you to mount the TV on the wall.

For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for

assistance when installing the wall mount bracket.

Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the

TV on your own.

Wall Mount Kit Specifications (VESA)

✎

The wall mount kit is not supplied, but sold separately.

Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact

your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.

✎

NOTE

x

Standard dimensions for wall mount kits are shown in the table below.

x

When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.

x

Do not use screws that do not comply with the VESA standard screw specifications.

x

Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw

specifications. Screws that are too long may cause damage to the inside of the TV set.

x

For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ

depending on the wall mount specifications.

x

Do not fasten the screws that are too strongly; this may damage the product or cause the product to fall, leading to

personal injury. Samsung is not liable for these kinds of accidents.

x

Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or

the consumer fails to follow the product installation instructions.

x

Do not mount the TV at more than a 15 degree tilt.

Product Family inches VESA Spec. (A * B) Standard Screw Quantity

LED-TV

[Ultra-Slim]

19~22 75 X 75 M4

4

23~29 200 X 100

M8

32~37 200 X 200

40~55 400 X 400

56~65 600 X 400

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to

electric shock.

[UC7000_Aus]BN68-02831A-01Eng.indb 54 2010-03-16 오후 2:04:13

55

English

05 Other Information

Anti-theft Kensington Lock

The Kensington Lock is not supplied by Samsung. It is a device used to

physically fix the system when using it in a public place. The appearance and

locking method may differ from the illustration depending on the manufacturer.

Refer to the manual provided with the Kensington Lock for additional

information on proper use.

✎

Please find a “

K

” icon on the rear of the TV. A kensington slot is beside

the “

K

” icon.

1. Insert the locking device into the Kensington slot 1 on the LED TV and

turn it in the as shown 2.

2. Connect the Kensington Lock cable 3.

3. Fix the Kensington Lock to a desk or a heavy stationary object.

✎

The locking device has to be purchased separately.

✎

The location of the Kensington slot may be different depending on the

TV model.

Securing the TV to the wall

Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your

children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious

injuries or death. Follow all safety precautions provided in the included Safety Flyer. For added stability and

safety, install the anti-fall device as follows.

¦To Avoid the TV from Falling

1. Put the screws into the clamps and firmly fasten them onto the wall.

Confirm that the screws have been firmly installed onto the wall.

✎

You may need additional material such as an anchor depending on

the type of wall.

✎

Since the necessary clamps, screws, and string are not supplied,

please purchase these additionally.

2. Remove the screws from the back centre of the TV, put the screws into

the clamps, and then fasten the screws onto the TV again.

✎

Screws may not be supplied with the product. In this case, please

purchase the screws of the following specifications.

✎

Screw Specifications

x

For a 19 ~ 22 inch: M4

x

For a 23 ~ 65 inch: M8

3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall

with a strong cable and then tie the string tightly.

✎

NOTE

x

Install the TV near to the wall so that it does not fall backwards.

x

It is safe to connect the string so that the clamps fixed on the

wall are equal to or lower than the clamps fixed on the TV.

x

Untie the string before moving the TV.

4. Verify all connections are properly secured. Periodically check

connections for any sign of fatigue for failure. If you have any doubt about

the security of your connections, contact a professional installer.

TV Rear

1

2

3

<Optional>

Wall

[UC7000_Aus]BN68-02831A-01Eng.indb 55 2010-03-16 오후 2:04:13

56

English

Other Information

Troubleshooting

If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.

samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual.

Issues Solutions and Explanations

Picture Quality First of all, please perform the Picture Test and confirm that your TV is properly displaying test image.

(go to MENU - Support - Self Diagnosis - Picture Test) (p. 24)

If the test image is properly displayed, the poor picture may caused by the source or signal.

The TV image does not look as good as it

did in the store.

• If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component

cables to deliver HD (high definition) picture quality.

• Cable/Satellite subscribers: Try HD stations from the channel line up.

• Antenna connection: Try HD stations after performing Auto programme.

✎

Many HD channels are up scaled from SD(Standard Definition) contents.

• Adjust the Cable/Set top box video output resolution to 1080i or 720p.

• Make sure you are watching the TV at the minimum recommended distance based on the size and

definition of the signal.

The picture is distorted: macro block error,

small block, dots, pixelization

• Compression of video contents may cause picture distortion especially in fast moving pictures such

as sports and action movies.

• Low signal level or bad quality can cause picture distortion. This is not a TV issue.

Colour is wrong or missing. • If you’re using a component connection, make sure the component cables are connected to the

correct jacks. Incorrect or loose connections may cause colour problems or a blank screen.

There is poor colour or brightness. • Adjust the Picture options in the TV menu. (go to Picture mode / Colour / Brightness / Sharpness)

(p. 15)

• Adjust Energy Saving option in the TV menu. (go to MENU - Picture - Eco Solution -

Energy Saving) (p. 15)

• Try resetting the picture to view the default picture settings. (go to MENU - Picture - Picture Reset)

(p. 19)

There is a dotted line on the edge of the

screen.

• If the picture size is set to Screen Fit, change it to 16:9. (p. 16)

• Change cable/set top box resolution.

The picture is black and white. • If you are using an AV composite input, connect the video cable (yellow) to the Green jack of

component input 1 on the TV.

When changing channels, the picture

freezes or is distorted or delayed.

• If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until

the cable box reboots. It may take up to 20 minutes.

• Set the output resolution of the cable box to 1080i or 720p.

Sound Quality First of all, please perform the Sound Test to confirm that your TV audio is properly operating.

(go to MENU - Support - Self Diagnosis - Sound Test) (p. 24)

If the audio is OK, the sound problem may caused by the source or signal.

There is no sound or the sound is too low

at maximum volume.

• Please check the volume the of external device connected to your TV.

The picture is good but there is no sound. • Set the Speaker Select option to TV Speaker in the Sound menu. (p. 21)

• If you are using an external device, make sure the audio cables are connected to the correct audio

input jacks on the TV.

• If you are using an external device, check the device’s audio output option (ex. you may need to

change your cable box’s audio option to HDMI when you have a HDMI connected to your TV).

• If you are using a DVI to HDMI cable, a separate audio cable is required.

• If your TV has a headphone jack, make sure there is nothing plugged into it.

The speakers are making an inappropriate

noise.

• Check the cable connections. Make sure a video cable is not connected to an audio input.

• For antenna or cable connections, check the signal strength. Low signal level may cause sound

distortion.

[UC7000_Aus]BN68-02831A-01Eng.indb 56 2010-03-16 오후 2:04:14

57

English

05 Other Information

Issues Solutions and Explanations

No Picture, No Video

The TV won’t turn on. • Make sure the AC power cord is securely plugged in to the wall outlet and the TV.

• Make sure the wall outlet is working.

• Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns

on, refer to “The remote control does not work” below.

The TV turns off automatically. • Ensure the Sleep Timer is set to Off in the Setup menu. (p. 22)

• If your PC is connected to the TV, check your PC power settings.

• Make sure the AC power cord is plugged in securely to the wall outlet and the TV.

• When watching TV from an antenna or cable connection, the TV will turn off after 10 ~ 15 minutes if

there is no signal.

There is picture/Video. • Check cable connections (remove and reconnect all cables connected to the TV and external

devices).

• Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the

connections to the TV input. For example, if an external device’s output is HDMI, it should be connect

to an HDMI input on the TV.

• Make sure your connected devices are powered on.

• Be sure to select the TV’s correct source by pressing the SOURCE button on the TV remote.

RF(Cable/Antenna) Connection

The TV is not receiving all channels. • Make sure the Antenna cable is connected securely.

• Please try Plug & Play (Initial setup) to add available channels to the channel list. Go to MENU -

Setup - Plug & Play (Initial setup) and wait for all avaiable channels to be stored (p. 7).

• Verify the Antenna is positioned correctly.

The picture is distorted: macro block error

small block, dots, pixelization

• Compression of video contents may cause picture distortion, especially with fast moving pictures

such as sports and action movies.

• A low signal can cause picture distortion. This is not a TV issue.

PC Connection

A “Mode Not Supported” message

appears.

• Set your PC’s output resolution and frequency so they matche the resolutions supported by the TV.

(p. 26)

“PC” is always shown on the source list,

even if a PC is not connected.

• This is normal; “PC” is always shown on the source list, regardless of whether a PC is connected.

The video is OK but there is no audio. • If you are using a HDMI connection, check the audio output setting on your PC.

Network Connection (Depending on Models)

Wireless network connection failed. • Samsung Wireless USB dongle is required to use a wireless network.

• Make sure the Network Connection is set to Wireless (p. 29).

• Make sure the TV is be connected to a wireless IP sharer (router).

[UC7000_Aus]BN68-02831A-01Eng.indb 57 2010-03-16 오후 2:04:14

58

English

Other Information

Issues Solutions and Explanations

Others

The picture won’t display in full screen. • HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3)

contents.

• Black bars on the top and bottom will appear during movies that have aspect ratios different from

your TV.

• Adjust the picture size options on your external device or TV to full screen.

The remote control does not work. • Replace the remote control batteries with the poles (+/–) in the right direction.

• Clean the sensor’s transmission window on the remote.

• Try pointing the remote directly at the TV from 5~6 feet away.

The cable/set top box remote control

doesn’t turn the TV on or off, or adjust the

volume.

• Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set user

manual for the SAMSUNG TV code.

A “Mode Not Supported” message

appears.

• Check the supported resolution of the TV, and adjust the external device’s output resolution

accordingly. Refer to the resolution settings on page 25 of this manual.

There is a plastic smell from the TV. • This smell is normal and will dissipate over time.

The TV Signal Information is unavailable

in the Self Diagnostic Test menu.

• This function is only available with digital channels from an Antenna / RF/Coax connection (p. 24).

The TV is tilted to the side. • Remove the base stand from the TV and reassemble it.

There are difficulties assembling the stand

base.

• Make sure the TV is placed on a flat surface. If you can not remove the screws from the TV,

unnecessary use a magnetized screw driver.

The channel menu is greyed out.

(unavailable)

• The Channel menu is only available when the TV source is selected.

Your settings are lost after 30 minutes or

every time the TV is turned off.

• If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change

the settings from Store Demo mode to Home Use mode in the Plug & Play (Initial setup) procedure.

Press the SOURCE button to select TV mode, and go to MENU → Setup → Plug & Play (Initial

setup) → ENTER

E

(p. 7).

You have intermittent loss of audio or

video.

• Check the cable connections and reconnect them.

• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are

flexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90

degree connectors.

You see small particles when you look

closely at the edge of the frame of the TV.

• This is part of the product’s design and is not a defect.

The PIP menu is not available. • PIP functionality is only available when you are using a HDMI, PC or components source (p. 24).

The message “Scramble signal” or “Weak

Signal/No Signal” appears.

• If you are using a CAM CARD (CI/CI+), check that it is installed into the common interface slot.

• If there is still a problem, pull the CAM CARD out of the TV and insert it into the slot again.

You turned the TV off 45 minutes ago, and

it turned on again.

• It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware

downloaded whilst your watching TV.

There are recurrent picture/sound issues. • Check and change the signal/source.

A reaction may occur between the rubber

cushion pads on the base stand and the

top finish of some furniture.

• To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.

✎

This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However,

there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the

product.

[UC7000_Aus]BN68-02831A-01Eng.indb 58 2010-03-16 오후 2:04:14

59

English

05 Other Information

¦Licence

Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are

trademarks of Dolby Laboratories.

TheaterSound, SRS and the symbol are trademarks of SRS Labs, Inc.

TheaterSound technology is incorporated under license form SRS Lab, Inc.

Manufactured under licence under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;

6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are

registered trademarks. & DTS 2.0 Channel and the DTS logos are trademarks of DTS, Inc. Product

Includes software. © DTS, Inc. All Rights Reserved.

DivX Certified to play DivX video up to HD 1080p, including premium content.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified device that

plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX Video-on-

Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu.

Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.

Pat. 7,295,673; 7,460,688; 7,519,274

Open Source Licence Notice

In the case of using open source software, Open Source Licences are available on the product menu.

[UC7000_Aus]BN68-02831A-01Eng.indb 59 2010-03-16 오후 2:04:15

60

English

Other Information

Specifications

Panel native 1920 x 1080 @ 60 Hz

Environmental Considerations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

10°C to 40°C (50°F to 104°F)

10% to 80%, non-condensing

-20°C to 45°C (-4°F to 113°F)

5% to 95%, non-condensing

Model Name UA40C7000 UA46C7000 UA55C7000

Screen Size 40 inches 46 inches 55 inches

Sound

(Output) 10W x 2 10W x 2 15W x 2

Dimensions (WxDxH)

Body

With stand

957.4 X 26.5 X 578.7 mm

957.4 X 267.7 X 648.4 mm

1092.3 X 653.2 X 26.5 mm

1092.3 X 302.9 X 724.3 mm

1283.4 X 26.5 X 762.3 mm

1283.4 X 302.2 X 833.4 mm

Weight

Without Stand

With Stand

13.2 kg

15.4 kg

16.8 kg

19.1 kg

22.2 kg

24.5 kg

✎

Design and specifications are subject to change without prior notice.

✎

For information about power supply, and more about power consumption, refer to the label attached to the product.

[UC7000_Aus]BN68-02831A-01Eng.indb 60 2010-03-16 오후 2:04:15

61

English

05 Other Information

Index

A

AllShare 50

Amplify 20

Anynet+ 42

AUDIO OUT 10

Auto Adjustment 20

Auto Volume 21

B

Background Music 41

Balance L/R 20

Basic View 40

Batteries 6

Black Tone 15

Blanking Bracket 53

Brightness 15

C

Cable Tie 4, 53

Change PIN 22

Channel Menu 13

Clock 22

Colour Tone 16

Component 9

Connecting to a PC 26

Connecting to an Audio Device 10

D

DIGITAL AUDIO OUT 10, 42

DivX® VOD 41

D-sub 26

Dynamic 15

Dynamic Contrast 15

E

Eco Sensor 15

Edit Name 10

Editing Channels 14

Energy Saving 15

Equalizer 20

External Speaker 21

F

Favourite Channel 13

Film Mode 17

Fine Tune 14

Flesh Tone 16

Frequency 13

H

HDMI 8, 42

Headphones 10

Home Theatre 10, 42

I

Installation Space 2

Internet@TV 46

L

Language 23

License 59

Lock 14

M

Media Play 34

Melody 23

Menu Transparency 23

Music 39

N

Navigate 11

Network Connection 27

Network Setup 28

O

ON/OFF button 6

Optimal resolution 26

P

Password 47

Photos 40

Picture Size 16, 42

PIP (Picture in Picture) 24

Plug & Play 7

Power Indicator 5

R

Receiver 44

Recording 44

Remote Control 6

Repeat Mode 41

RGB Only Mode 15

Rotate 41

S

Select All 14

Self Diagnosis 24

Sharpness 15

Signal Information 24

Sleep Timer 22

Slide Show 40

Software Upgrade 24

Source List 10

Speaker Select 21

Specifications 60

Standby mode 5

Subtitle 23

Symbol 3

T

Timer 22

Title 40

Tools 3

Troubleshooting 56

TV Speaker 21

U

USB Drive 25, 34

V

Video Formats 38

Videos 38

Volume 5

W

Wall Mount 53

Warm 16

White Balance 16

[UC7000_Aus]BN68-02831A-01Eng.indb 61 2010-03-16 오후 2:04:16

This page is intentionally

left blank.

[UC7000_Aus]BN68-02831A-01Eng.indb 62 2010-03-16 오후 2:04:16