Samsung Security Camera Smartcam Wifi Home Users Manual

SNH-1010N to the manual 61b5f55e-2f8d-4a21-a351-d08f8c7a9e54

: Samsung Samsung-Samsung-Security-Camera-Samsung-Smartcam-Wifi-Home-Security-Camera-Users-Manual-282626 samsung-samsung-security-camera-samsung-smartcam-wifi-home-security-camera-users-manual-282626 samsung pdf

Open the PDF directly: View PDF .
Page Count: 2

SNH-1010N English

Quick Start

Guide

Thank you for purchasing the Samsung

SmartCam WiFi Home Security Camera.

Follow the simple

steps in this guide

to set up and start using your new

SmartCam.

UNPACKING

Make sure all following items are in the packaging:

Camera Adapter Network Cable Double Sided

Tape Bracket Quick Guide X3

Warranty Card /

GPL License

JPlease keep the packaging

You will need the serial number that on the side of the

packaging to register the camera.

1.

CONNECTING THE CAMERA TO YOUR ROUTER

1) Connect the power adapter to the camera.

2) Connect the network cable to

the camera and your network

router.

Connect one end of the enclosed network cable to your camera and the

other to an open port on your router. Once setup is compete, you will no

longer need the network cable and the camera will connect to your WiFi

network.

3) The camera bootup will take about 1

minute then the camera status LED

will change from red to white.

JIf your WiFi router supports WPS feature, refer to the user manual to connect

via WPS button.

2-1.

SETTING UP YOUR ACCOUNT FROM MOBILE PHONE

Download the Samsung Smartcam App on to your

Android phone or your iPhone.

Search keywords for the application: “Samsung

SmartCam”, “Smartcam”, “SAMSUNG TECHWIN”,

“TECHWIN”.

1) Run the downloaded application.

2) Tap <Sign up here>.

3) Check to agree to the terms and conditions,

and then tap <Next>.

4) Enter the required information and Tap

<Register>.

• ID : Create user ID using letters, numbers and

periods between 8-14 characters.

• PW : Create password using letters and numbers

except colons and commas between 8-14

characters.

• Confirm Password : Checks whether your password is entered correctly.

• Name : Enter your name.

• E-mail : Email address is used to recover your account password.

2-2.

ADDING YOUR CAMERA

1) Log-in.

2) Tap <Add Camera>.

3) Select the camera found and tap <next>.

When your smartphone is connected to the same

WiFi network as the camera, it will automatically

search for the camera.

4) If the camera is not

detected, please enter

the camera serial

number manually.

Tap on [ ] for more

information.

5) Create the <Camera password> and

<Camera Name>, and then tap <Add>.

Create camera password using alphanumeric

characters between 1 to 8 without any space.

Example : q1

6) Tap <Go To Camera List>.

If there is a camera to register additionally, tap

<Register new camera>.

2-3.

CONNECTING CAMERA TO WI-FI NETWORK

1) From the camera list, tap on the [ ] for

cameraoptions.

2) Tap on <Setup> icon.

3) Enter the camera password you created for

this camera and Tap <OK>.

4) Tap the <Network setting>.

5) Turn WiFi on.

6) Select your WiFi network and enter your WiFi

network password.

• Other WiFi Networks : Enter the SSID name and

password to connect to the network.

7) Tap <OK> and unplug the network cable from the camera and

the router.

The WiFi status LED will become steady white once the camera is

connected to the Wireless Access Point. (may take up to 30sec).

You can now unplug and place the camera anywhere within your wireless

network range. If the camera LED did not turn solid white, please contact

our tech support at 1-877-349-3149.

8) Tap <Back> and select <Live> to see the video.

If you have any questions or need help

installing your new product please contact

our free technical support.

Telephone : 1-877-349-3149

9am - 9pm EST, Monday - Friday

Internet : http://www.samsungsv.com/Support/Index

Related manual can be downloaded from

https://www.samsungsmartcam.com/web.

The SmartCam webpage and mobile menu may be subject to change

without prior notice.

PT01-001489A

2-4.

VIEWING LIVE VIDEO

1) Tap on the camera icon [ ] to view live

video.

Tap on the arrow icon [ ] for camera

options.

2) Enter the <Camera password> for the

camera selected. This is the same camera

password you created at the time you

registered the camera.

Check the <SAVE> option to save the

camera password. Within 20 seconds, it will

start streaming.

Video loading time will vary depending on your

internet connection.

2-5.

CAMERA SETUP

Tap the <Setup> icon to

configure a camera to be

monitored.

General setting

1) Tap <General setting>.

2) Configure the basic camera settings.

• Camera Name : Camera name is used to easily

identify the camera when you have more than one.

i.e., Living room, Kitchen, Bedroom.

• Event Alarm : Specify whether to trigger the alarm

or not, and specify the sensitivity.

The higher the sensitivity is, the subtler motion/

audio events will be detected.

• Night Vision : Set the IR lighting.

Check <Night Vision> to set the camera to switch to the night vision

mode automatically.

• Audio : Adjust the volume of the built-in microphone and speaker of the

camera as appropriate.

3) Configure the notification.

• Push Notification : Check to receive push notification

to your phone.

• YouTube : Tap [ ] to enter your YouTube account

information to upload 30 video clips to your YouTube

account when event is detected.

• Picasa : Tap [ ] to enter your Picasa account

information to upload a picture to your Picasa

account when event is detected.

4) Tap <Apply>.

Time setting

1) Tap <Time setting>.

2) Set the camera’s clock.

• Time Zone : Select your region.

• Summer Time : Check this option if you live in a

country or region where DST(Daylight Saving Time)

is applied.

XXXXXXXXXXXXXXX

3-1.

SETTING UP YOUR ACCOUNT FROM COMPUTER

1) From your PC, launch your web

browser.

Supported browsers: WINDOWS :

Internet Explorer8+,Chrome, FireFox

MAC OS : Safari, Chrome, FireFox

2) Go to http://www.samsungsmartcam.com.

3) Click <Starting SmartCam>.

You need to install your plug in to

automatically search for cameras

connected to the network and view the video in your camera.

4) Create user ID between 8 to 14

alphanumeric character.

You can use letters, numbers and

periods.

5) Create password between 8 to 14

alphanumeric character.

You can use letters, numbers,

periods and commas between 8-14 characters.

6) Confirm Password.

7) Enter rest of the requested information and click <Sign Up>.

3-2.

ADDING YOUR CAMERA

1) Click <Yes> in the pop-up window

of camera registration after

completing your member sign-up.

2) Click <Next> if the LED status is

white.

3) Select the serial number of the

camera to be added from the

camera search list.

If the camera is not found, enter the

serial number manually.

The computer and the camera has to be

on the same network router to auto detect the cameras.

4) Click <Next>.

5) Create <Camera Name> and

<Camera password>.

Create camera password using

alphanumeric characters between 1 to

8 without any space. Example : q1

6) Click <Next>.

3-3.

CONNECTING CAMERA TO WI-FI NETWORK

1) After adding the camera, click

<Yes> in the wireless network setup

pop-up window.

2) Select your Wireless Network from

the list.

If your Wireless Network is hidden,

select <Other Wi-Fi Networks (not

listed)>.

3) Enter the password of your Wireless Network and click

<Next>.

To display the password, select <Display Strings>.

4) Click <OK>.

5) Unplug the network cable from the

camera and the router.

The WiFi status LED will become steady

white once the camera is connected to

the Wireless Access Point. (may take

up to 30sec). You can now unplug and

place the camera anywhere within your wireless network range. If the

camera LED did not turn solid white, please contact our tech support at

1-877-349-3149.

6) Click <Finish> if the <Finish>

button is activated.

3-4.

VIEWING LIVE VIDEO

1) Click <Go To My SmartCam>.

2) Select a camera from the camera

list at the upper left hand of the

screen.

3) Enter the camera password and

click <Apply>.

JIf you forget the camera password, it must

be reset.

Please refer to the user manual for details.

Check <Remember> to connect the camera without entering the

camera password.

3-5.

ALARM & NOTIFICATION

1) Click <Setup>.

2) Select the <Alarm & Notification>

tab.

3) Check <Motion Sensitivity> for

motion detection.

Check <Audio Sensitivity> for

audio detection.

4) Adjust the sensitivity.

3-6.

ALARM RECEIPT SETTING

* After clicking <Google>, select your email address and password.

The setting is required if you want to use YouTube/Picasa/Gmail.

YouTube

Automatically uploads 30 second clip to your private YouTube

account.

1) Select the Google.

2) Check <Use> of YouTube.

3) Enter your Gmail address and

password.

4) Click <Save to Google>.

JIf you do not have a YouTube account, please go to YouTube.com and register

an account. The recorded videos are 30sec clips.

Picasa

Automatically uploads a image to your private Picasa account.

1) Select the Google.

2) Check <Use> of Picasa.

3) Enter your Gmail address and

password.

If your Google email ID and password are saved, check the use of Picasa

only.

4) Click <Save>.

JThe Picasa account information of the user

is the same as the YouTube account.

Gmail

The event alarm is sent through Gmail.

1) Select the Google.

2) Check <Use> of Gmail.

3) Enter your Gmail address and

password.

If your Google email ID and password are saved, check the use of Gmail

only.

4) Click <Save>.

5) Enter your Gmail address to receive

the notification e-mail and click

<Add>.

Twitter

When an event is detected, the notification message is sent to the

user’s Twitter account.

1) Select the Twitter.

2) Click <Request URL>.

3) Click <Access Twitter>.

4) Enter the Twitter ID and password.

5) Click <Authorize app>.

3-7.

ALARM SCHEDULE SETTING

1) Click <Setup>.

2) Click the <Alarm Schedule> tab.

3) Select <Only Scheduled Time>.

Select the time slot to enable

detection.

4) Click <Apply>.

5) Select the <Time> tab.

6) Select the user’s time zone in

<Time Zone> and click <Apply>.

xxxxxxxxxxxxxxx

Display Strings