Samsung Un46H7150 46 Full Hd 1080P Led Tv Users Manual 30546H7150
UN46H7150%09 to the manual 05048b13-92a9-406c-a58c-6a46b1bbeac5
2015-01-23
: Samsung Samsung-Samsung-Un46H7150-46-Full-Hd-1080P-Led-Tv-Un46H7150-Users-Manual-279897 samsung-samsung-un46h7150-46-full-hd-1080p-led-tv-un46h7150-users-manual-279897 samsung pdf
Open the PDF directly: View PDF .
Page Count: 58
- User Manual
- Smart TV Setup Guide
- 2D Active Glasses User Guide
- See E-Manual
- Warranty
LED TV
user manual
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model _______ Serial No. ___________________
If you have any questions, please call us at 1-800-SAMSUNG (1-800-726-7864) for assistance.
* This Nanum Gothic Eco font is provided by NAVER.
English - 2
• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To
ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings
must never be blocked or covered.
Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper
ventilation is provided.
Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct
sunlight.
Do not place vessels (vases etc.) containing water on this apparatus, as this can result in a fire or
electric shock.
• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or
laundry tub, in a wet basement, or near a swimming pool etc.). If this apparatus accidentally gets wet,
unplug it and contact an authorized dealer immediately.
• This apparatus uses batteries. In your community, there might be environmental regulations that require
you to dispose of these batteries properly. Please contact your local authorities for disposal or recycling
information.
• Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire
or electric shock.
• Power-supply cords should be placed so that they are not likely to be walked on or pinched by items
placed upon or against them. Pay particular attention to cords at the plug end, at wall outlets, and the
point where they exit from the appliance.
• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will
prevent damage to the set due to lightning and power line surges.
• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the
DC adaptor corresponds to the local electrical supply.
• Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of
electric shock.
• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open
this apparatus.
This symbol indicates that high voltage is
present inside. It is dangerous to make any
kind of contact with any internal part of this
product.
This symbol indicates that important literature
concerning operation and maintenance has
been included with this product.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK). THERE ARE NO USER
SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO
QUALIFIED PERSONNEL.
RISK OF ELECTRIC SHOCK DO NOT OPEN
Warning! Important Safety Instructions
(Please read the Safety Instructions before using your TV.)
English - 3
• Make sure to plug the power cord in until it is firmly seated. When unplugging the power cord from a wall
outlet, always pull on the power cord's plug. Never unplug by pulling on the power cord. Do not touch the
power cord with wet hands.
• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming
from it - unplug it immediately and contact an authorized dealer or service center.
• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the
house for an extended period of time (especially when children, elderly or disabled people will be left
alone in the house).
Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord
to generate sparks and heat or the insulation to deteriorate.
• Be sure to contact an authorized service center for information if you intend to install your TV in a location
with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will operate
24 hours a day such as in an airport, a train station, etc. Failing to do so may lead to serious damage to
your TV.
• Use only a properly grounded plug and wall outlet.
An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
• To turn this apparatus off completely, you must disconnect it from the wall outlet. Consequently, the wall
outlet and power plug must be readily accessible at all times.
• Do not allow children to hang onto the product.
• Store the accessories (battery, etc.) in a location safely out of the reach of children.
• Do not install the product in an unstable location such as a shaky self, a slanted floor, or a location
exposed to vibration.
• Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a
service center.
• To clean this apparatus, unplug the power cord from the wall outlet and wipe the product using a soft,
dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air fresheners,
lubricants, or detergent. These chemicals can damage the appearance of the TV or erase the printing on
the product.
• Do not expose this apparatus to dripping or splashing.
• Do not dispose of batteries in a fire.
• Do not short-circuit, disassemble, or overheat the batteries.
• There is danger of an explosion if you replace the batteries used in the remote with the wrong type of
battery. Replace only with the same or equivalent type.
• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS WITH OPEN FLAMES
AWAY FROM THIS PRODUCT AT ALL TIMES.
• This product contains chemicals known to the State of California to cause cancer and
reproductive toxicity.
• Use care when touching the TV after it has been on for some time. Some parts can be
warm to the touch.
English - 4
Internet Security
Samsung takes a number of steps to protect its Internet-compatible Smart TVs against unauthorized incursions
and hacking. For example, certain sensitive communications between the TV and the Internet servers
are encrypted. In addition, the TV’s operating system has adopted controls to prevent the installation of
unauthorized applications.
Although we take steps to protect your SmartTV and information, no Internet-connected device or
transmission is completely secure. We therefore encourage you to take additional steps to safeguard your TV,
secure your Internet connection, and minimize the risk of unauthorized access. These steps are listed below:
• When Samsung releases software updates to improve the security on your TV, you should promptly install
these updates. To automatically receive these updates, turn on “Auto Update” in the TV’s menu (Support
> Software Update > Auto Update). When an update is available, a popup message appears on the TV
screen. Accept the software download and update by selecting YES when prompted. Take steps to secure
your wireless router and network. Your router’s manual should provide additional details about how to
implement the following measures:
• Secure your wireless router’s management settings with a unique password to prevent unauthorized
changes to security related settings.
• Implement standard encryption (e.g., WPA2 encryption) on your wireless router to secure your
wireless network signal.
• Secure access to your wireless network with a hard-to-guess password.
• Confirm your router’s firewall setting is enabled (if so equipped).
• Make sure all your Internet connected devices are behind your network’s firewall.
• If your router or modem has a standby mode button, use it to disconnect your home network from the
Internet when it is not in use.
• Use strong passwords for all your Internet accounts (Netflix, Facebook, Skype, etc.). If your TV has a
camera, recess the camera into the TV’s bezel when it is not in use. Recessing the camera makes it
inoperative.
• If any unexpected messages appear on your TV screen requesting permission to link a device or enable a
remote session, do NOT accept.
• Do not visit suspicious web sites and do not install any suspicious programs. We recommend users install
only those authorized apps provided by Samsung through Samsung Smart Hub.
English - 5
Figures and illustrations in this User Manual are provided for reference only and may differ from the actual
product appearance. Product design and specifications may change without notice.
Features of your new TV
3D
This new feature lets you view 3D content.
SMART HUB
Your TV features Smart Hub, a multi-purpose entertainment and family center. With Smart Hub, you can surf
the web, download applications, and stay in touch with family and friends through social networking services.
In addition, you can view or play photo, video, and music files stored on external storage devices.
Press the button to launch Smart Hub. Choose a service using the icons displayed in the top part of the
screen.
Smart Hub services and functionality include:
Games: You can view all game apps provided by Smart Hub and download and play games you select.
SAMSUNG APPS: Samsung Apps offers an extensive collection of free and for-pay news, sports, weather,
and gaming content you can download directly to and enjoy on your TV.
On TV: View a listing of programs that are currently airing or are scheduled to air. Select a program to
watch.
MOVIES & TV SHOWS: Purchase and stream movies and series directly from the Internet.
MULTIMEDIA: Play back photo, video, and music files from an external storage device.
Anynet+ (HDMI-CEC)
Lets you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote.
e-Manual
Provides a detailed, on-screen user's manual built into your TV (page 21).
SMART Interaction
Access and control menu options and functions using motions. To use Smart Interaction, connect the SMART
TV camera (sold separately) to the TV.
Device Manager
Use the TV features with a USB or Bluetooth keyboard and mouse.
Screen Mirroring
Displays mobile device screens on the TV using a wireless connection.
English - 6
Contents
01. Turning on the TV and
Cabling
7 Turning on and Controlling the TV
7 Arrange the cables using the Cable
Holder
02. Using the Remote Control
8 Using the Remote Control
03. Using the Samsung Smart
Control
10 Buttons and Functions
15 Switching Between Video Sources
15 Using the Remote Control to Control
External Devices
15 Connecting the IR Extender Cable
16 Setting Up the Universal Remote
Control
04. Smart Hub
05. Using the e-Manual
21 Launching the e-Manual
21 Additional e-Manual Features
22 Updating the e-Manual to the Latest
Version
06. Troubleshooting and
Maintenance
23 Troubleshooting
25 Network Troubleshooting
28 Eco Sensor and Screen Brightness
29 Getting Remote Support
29 Caring for the TV
07. Specifications, wall
mounting, and other
information
30 Specifications
32 Dimensions
33 Licenses
34 Mounting the TV on a Wall Using the
Wall Mount Kit (Optional)
35 Providing Proper Ventilation for Your
TV
36 Securing the TV to the Wall
37 Warranty Information
38 SAMSUNG BRAND PRODUCTS
English - 7
01. Turning on the TV and Cabling
Turning on and Controlling the TV
You can turn on the TV using the Samsung Smart Control or the TV’s Controller, a small joystick-like button on
the back of the TV in its lower-left corner. You can also use the TV's Controller to operate the TV without the
Samsung Smart Control.
mR
P
Open Smart Hub.
Turn off the TV.
Select a source.
Open the menu.
TV Controller
The control stick is located on the
lower-left corner of the back of the TV
Remote control sensor
When you use the Samsung Smart Control, the
standby LED does not light, except when you
press the
P
button.
Arrange the cables using the Cable Holder
Make sure you have the correct cable before plugging it in. Illustrations of common plugs and ports are shown
below.
Cable Plugs Ports
HDMI
USB
Optical
Warning
Do not plug cables in upside down.
Be sure to check the orientation of the
plug before plugging it in.
English - 8
02. Using the Remote Control
Using the Remote Control
The standard remote control is provided for ease of use.
BCD
Turns the TV on and off.
Turn on the backlight for the
buttons.
When on, the buttons become
illuminated for a moment when
pressed. (Using the remote
control with this button set
to On will reduce the battery
usage time.)
Gives direct access to channels.
Adjusts the volume.
Opens the OSD (Menu).
Displays frequently used
functions.
Returns to the previous menu.
Use these buttons according to
the directions on the TV's screen.
Use these buttons in a specific
feature.
Use these buttons according
to the directions on the TV's
screen.
Moves the cursor, selects the
on-screen menu items, and
changes the values seen on the
TV's menu.
Displays channel lists on the
screen.
Press to select additional digital
channels being broadcast by
the same digital station. For
example, to select channel
‘54-3’, press ‘54’, then press ‘-’
and ‘3’.
STB: Turns the satellite or cable
set-top box connected to the
TV on and off.
STB GUIDE: Displays the STB's
EPG (Electronic Program
Guide).
STB MENU: Opens the STB's
OSD (Menu).
These buttons are only available
when the universal remote
control is set and the TV is on.
Displays and selects the
available video sources.
Returns to the previous
channel.
Cuts off the sound temporarily.
Brings up Smart Hub
applications. See the e-Manual
chapter, Smart Features > Smart
Hub.
Changes channels.
Exits the menu.
Displays the EPG
(Electronic Program Guide).
Displays information on the TV
screen.
E-MANUAL: Displays the
e-Manual.
SEARCH: Opens the Search
function.
KEYPAD: Displays a virtual
On-Screen Remote on the
screen. See the e-Manual
chapter, Using the Remote
Control and Peripherals > Using
the Samsung Smart Control >
Displaying and Using the On-
Screen Remote.
3D: Turns the 3D image on or off.
MTS: Press to choose stereo,
mono, Separate Audio Program
(SAP broadcast).
P.SIZE: Lets you choose the
picture size.
CC: Controls the caption decoder.
English - 9
Installing Batteries into the Remote Control
Match the polarity of the batteries to the symbols in the battery compartment.
NOTE
Use the remote control within 23 feet of the TV.
Bright light may affect the performance of the remote control. Avoid using near bright fluorescent lights
or neon signs.
The color and shape may vary depending on the model.
English - 10
03. Using the Samsung Smart
Control
Buttons and Functions
MUTE: Cuts off the
sound temporarily.
RETURN
EXIT
GUIDE
CH.LIST
SMART HUB
KEYPAD SOURCE
VOL CH
VOICE
3D CC P.SIZEMTS
MENU M.SCREEN
SEARCH
MIC
TV
Microphone: Use the microphone with the Voice Control
and Voice functions.
The Voice Control function can be affected by
unclear pronunciation, voice level, or surrounding
noise.
Turns the TV on and off.
SEARCH: Run the Search function.
KEYPAD: Displays the On-Screen Remote. See the
e-Manual chapter, Using the Remote Control and
Peripherals > Using the Samsung Smart Control >
Displaying and Using the On-Screen Remote.
SOURCE: Displays and lets you select video sources.
VOICE: Takes your voice commands and lets you enter
text using your voice.
Changes channels.
Adjusts the volume.
Touch pad
Place a finger on the touch pad and move the Samsung
Smart Control. The pointer on the screen moves in the
direction you moved the Samsung Smart Control.
Press the touch pad to run the focused item.
Press and hold the touch pad to display the Context-
Sensitive Menus.
<
>
¡
£
: Moves the cursor, selects the on-screen
menu items, and changes the values seen on the TV's
menu.
RETURN: Returns to the previous menu.
SMART HUB: Brings up Smart Hub applications. See the
e-Manual chapter, Smart Features > Smart Hub.
To exit an application quickly, press the button.
GUIDE: Displays the EPG (Electronic Program Guide).
Use these buttons with a specific feature and according
to the directions on the TV's screen.
3D: Turns the 3D function on or off. See the e-Manual chapter, Picture and Sound Settings > Viewing in 3D.
MTS: Press to choose stereo, mono, Separate Audio Program (SAP broadcast).
CC: Controls the caption decoder and displays captions on the screen.
P.SIZE: Lets you choose the picture size.
MENU: Displays the menu on the screen.
M.SCREEN: You can split the TV screen and enjoy multiple activities - such as watching TV,
surfing the web, and watching a video - all at the same time.
English - 11
Installing Batteries into the Samsung Smart Control
To use the Samsung Smart Control, insert the batteries into the device referring to the figure below.
1. Gently pull on the battery cover's notch, and then remove the cover completely once it comes loose.
2. Insert 2 AA alkaline batteries, making sure to align the positive and negative polarities correctly.
3. Place the battery cover on the remote control and insert the top part of the cover into the remote control.
4. Press the catches on both sides of the battery cover in the order shown by the figure so that the cover is
completely attached to the remote control.
Using the Samsung Smart Control Motion Function to Operate the TV
The Samsung Smart Control has a motion sensor (gyro sensor) that lets you control the TV easily by moving the
Samsung Smart Control and using it much like a cordless mouse.
Place a finger on the Samsung Smart Control's touch pad, and then move the Samsung Smart Control. A
pointer appears on the screen. Move the Samsung Smart Control, and the pointer moves on the screen in the
direction you moved the Samsung Smart Control and the same distance. Highlight an item on the screen with
the pointer, and then press the touch pad to select it.
You can also move the Samsung Smart Control in the same fashion to scroll scrollable screens up and down.
If you stop using the Motion Function, even momentarily, put your finger on the touch pad again, and
then move the Samsung Smart Control to re-start the function.
If Voice Guide is set to On, the Samsung Smart Control's motion sensor does not work. For the motion
sensor in the Samsung Smart Control to work, you must set Voice Guide to Off.
English - 12
Using the Touch Pad and the Directional Buttons
In the TV's menu, navigate to Support > Smart Control Tutorial to view a tutorial that shows how to use
the touch pad.
If the touch pad's sensitivity is too high or low, navigate to the System > Smart Control Settings menu, and
then select the Touch Sensitivity option to change the touch pad sensitivity.
Moving the Focus or Pointer Entering the Menu / Selecting an Item
Press the directional buttons (up, down, left, and
right) to move the focus, pointer, or cursor in the
direction you want.
To enter a menu or select an item, highlight the
item or the menu title, or move the pointer over
it, and then press the touch pad.
Displaying Context-sensitive Menus in
Smart Hub
Changing the Smart Hub Panel
In Smart Hub, highlight an item, and then press
and hold the touch pad. The context-sensitive
menu for the item pops up.
The context-sensitive menu may vary
depending on the item you selected.
On a Smart Hub panel, drag left or right on
the touch pad. The previous or next Smart Hub
panel appears.
Scrolling on the Web Browser
When you are using the web browser, drag up or
down on the touch pad to scroll the web screen.
English - 13
Reconnecting the Samsung Smart Control to the TV
If the Samsung Smart Control stops operating or works abnormally, try replacing the batteries. If the problem
persists, pair the Samsung Smart Control and TV again.
1. Move to within a foot of the TV, and then aim the Samsung Smart Control at the TV's remote control
sensor.
Remote Control Sensor
2. Press the RETURN button and GUIDE button simultaneously for 3 seconds.
3. The connecting icon appears on the screen. A few moments later, the connected icon appears. The
Samsung Smart Control is paired to the TV.
The Low Battery Alarm Window
If the Samsung Smart Control's batteries become low, the Low Battery Alarm appears on the screen. When the
Alarm appears, replace the batteries. We recommend using alkaline batteries for longer operating life.
<Low battery Alarm Icon>
English - 14
Displaying and Using the On-Screen Remote
Press the KEYPAD button on the Samsung Smart Control to display the On-Screen Remote on the TV's screen.
Use the On-Screen Remote to enter numbers, control content playback, and use the features and functions of
the TV, just like a real remote. Use the directional buttons on the Samsung Smart Control to move the cursor
on the On-Screen Remote. Press the touch pad on the Samsung Smart Control to select.
The On-Screen Remote buttons may vary depending on the TV features or functions you are using.
Button Description
Lets you switch channels by entering channel numbers directly. Select Pre-CH to
return to the previous channel.
Controls the playback of video, photo, or music files from all sources, and the
playback of media content on external devices (for example, a Blu-ray player).
a
,
b
,
{
,
}
Use these colored buttons to access additional options specific to the feature in use.
TOOLS
Press to display the Tools menu while you are watching TV. The Tools menu gives
you easy access to frequently used functions. The functions listed are context-
sensitive and vary depending on how you are currently using the TV.
INFO Shows information about the current digital broadcast program or content.
MENU Displays the TV's menu on the screen.
Speaker Settings Lets you select the speakers which will play the TV's audio. You must connect a
home theater or amplifier with external speakers to the TV to use this function.
PIP Lets you display video from an external device or computer on the main screen and
a TV broadcast in a picture-in-picture window.
Multi-Link Screen Lets you split the TV screen and use multiple functions - such as watching TV,
surfing the web, and playing a video - at the same time.
CC Select to turn subtitles on or off.
P.Size Changes the picture size.
SLEEP This function automatically shuts off the TV after a preset period of time.
P.Mode Lets you select the Picture Mode.
Web Browser Launches the Web Browser.
e-Manual Opens the e-manual.
Sign In Select to log in to or out of your Samsung account.
Move to the right / Move to the left: Moves the Onscreen Remote on the screen.
Large size / Normal size: Resizes the Onscreen Remote on the screen.
Alternatively, navigate to the System > Smart Control Settings menu and select
and set the Onscreen Remote Size option.
Touch Sensitivity: Lets you change the touch pad sensitivity.
Alternatively, navigate to the System > Smart Control Settings menu and select
and set the Touch Sensitivity option.
Universal Remote Setup: Displays the Universal Remote Setup screen.
Cancel: Select to close a pop up menu.
English - 15
Switching Between Video Sources
Press the SOURCE button to switch between external devices connected to the TV. For example, to switch to
a game console connected to the second HDMI connector, press the SOURCE button. The Source List appears
across the top of the screen. From the Source list, select HDMI2.
The connector names may vary depending on the product.
Using the Remote Control to Control External Devices
MENU > System > Universal Remote Setup
The universal remote control feature lets you control cable boxes, Blu-ray players, home theaters, and other
third-party external devices connected to the TV using the TV's remote control. For each external device you
want to control, you must run the universal remote set up process. The first step in the process is connecting
the IR extender cable (included) to the TV and positioning the transmitter end of the cable in front of the
device you want to control.
You can also use the Anynet+ (HDMI-CEC) function to operate external Samsung devices with your TV's
remote control without any additional setup.
Connecting the IR Extender Cable
The color and design of the IR extender cable may vary depending on the model.
4 inches
To begin the universal remote set up process, connect the IR extender cable (included) to the TV's IR output
connector as shown in the diagram, and then position the transmitter end within 4 inches (10 cm) of the
external device's remote control sensor, pointing in the direction of the sensor.
There can be no obstacles between the transmitter end of the IR extender cable and the external device. Any
obstacles will interfere with the transmission of the remote control signals.
English - 16
Setting Up the Universal Remote Control
If you want to control a set-top-box, you need to have your zip code and your cable provider's name and
location on hand before you begin. If you want to control a Blu-ray player or home theater, you need the
manufacturer's name and model number.
1. Turn on the external device you want to control with the universal remote function.
2. Press the SOURCE button on your remote to bring up the Source screen.
3. Select the Universal Remote Setup icon.
You can also start Universal Remote Setup through the TV's menu. Navigate to System > Universal
Remote Setup.
4. The TV checks if the IR extender cable is connected. If it confirms the connection, press the touch pad.
5. Select the type of device you want to control - set-top-box, Blu-ray player, or home theater.
6. Follow the directions on the screen to complete the set up and register the device. The directions will be
different, depending on the device you want to control.
7. Once set up is complete and you have confirmed that you can use the TV remote to control the device,
disconnect the IR extender cable from the TV and set it aside. You can now control the device directly with
your remote.
Controlling an External Device with the TV Remote
During the universal remote set up process, the TV registers the connector (source) the external device is
connected to. To control a registered external device with your TV's remote, select the external device on the
Source List.
1. Press the SOURCE button on your remote.
2. Select the source the device is connected to (HDMI1, HDMI2, etc.)
3. Control the device with the remote. For example, if the device is a set-top-box, press the channel buttons
on the remote to change the channel.
For information on additional functions, see "Controlling External Devices with the TV Remote - Using the
Universal Remote" in the e-Manual.
English - 17
04. Smart Hub
Smart Hub is the control center of the TV. Through Smart Hub you can view TV program schedules and select
shows to watch, download and install apps and games, select and stream movies and TV shows, and playback
photo, video, and music files located on Blu-ray players, USB devices, smart phones and tablets, your computer,
and the Internet.
Smart Hub has five main panels: Games, SAMSUNG APPS, On TV, MOVIES & TV SHOWS, and MULTIMEDIA.
To move from panel to panel, select one of the icons at the top of the screen. You can also swipe left or right
across the touch pad to display the previous or next panel. Each panel gives you access to additional screens. To
open the additional screens, select items on the panel or select an icon or hotspot on the screen.
The TV must be connected to the Internet to access Smart Hub.
Games Panel
The Games panel displays games you can download to and play on your TV. You can also update or delete
downloaded games. The Games panel has two sub-panels: All Games and My Page. All Games displays all the
games available through Smart Hub. My Page displays the games you have downloaded. Most games listed on
the Games panel are free, while some require a fee. To download a for-pay game, you must have a Samsung
Account with a registered credit card.
Basic Games Panel Functions
In the My Page or All Games panel, move the focus to a game, and then press and hold the touch pad. An
Options drop down list appears with the following functions.
• Download/Remove: Downloads games to the TV or removes games from the TV.
• View detail: Displays detailed information about the selected game.
Quickly Downloading and Installing a Game
Select a game, and then press and hold the touch pad. When the Options drop down list appears, select
Download from the list. If the game is free, the game you selected is installed on the TV. If the game is not free,
follow the directions on the screen to pay for and download the game.
SAMSUNG APPS Panel
The SAMSUNG APPS panel displays a variety of free and for pay news, sports, weather, and gaming apps.
The Samsung Apps panel has a number of sub-panels including Most Popular, What's new, and Categories.
Default apps install automatically when Smart Hub is first launched. The default apps may differ depending on
your region. Most apps listed on the SAMSUNG APPS panel are free, but some apps require a fee. To download
these, you must have a Samsung Account with a registered credit card.
English - 18
SAMSUNG APPS Panel Functions
Move the focus to an app, and then press and hold the touch pad. An Options drop down list appears with the
following functions.
• Move: Relocates an app on the screen.
• Delete: Removes a selected app from your TV.
• Multi Delete: Removes multiple apps from the TV.
• View Details: Displays detailed information about a selected app.
• Change View: Changes how the apps are sorted on the screen, by Custom view or Most Played.
• Lock/Unlock: Locks or unlocks apps. Locked apps cannot be accessed.
• Update Apps: Displays a list of apps that have updates available. You can select which apps to update.
The SAMSUNG APPS Panel functions are context-sensitive. The functions that appear may differ depending on
the app you select.
Downloading and Installing an App
1. On the SAMSUNG APPS panel, select Most Popular, What's new, or Categories.
2. Move the focus to an app, and then press and hold the touch pad. When the Options drop down list
appears, select Download from the list. If the app is free, the app you selected is installed on the TV. If the
app is not free, follow the directions on the screen to pay for and download the app.
On TV Panel
On TV displays your current program live in a small window, a list of recommended programs currently on
other channels, and a list of recommended programs that will air later. Use these lists to change the channel,
view more information about recommended programs running later, including how much time is left until they
air. You can also set up a Schedule Viewing of a program that hasn’t aired yet.
To view a program recommended by On TV, select the image.
The On TV panel has the following main subpanels:
• Guide: Displays the program schedule of each digital channel. You can check the program schedule and
set up a Schedule Viewing.
• Timeline View: Displays program recommendations for different times of the day.
• Trending: Displays what is the most trendy or popular content on Twitter, You can set up a Schedule
Viewing to view.
On TV Panel Functions
Move the focus to a program, and then press and hold the touch pad. An Options drop down list appears with
the following functions.
• View details: Displays detailed information about the selected program.
• Reserving: Sets up a Schedule for the selected program.
English - 19
MOVIES & TV SHOWS Panel
Buy or rent movies and TV shows online and stream them to your TV using apps downloaded via Smart Hub.
This is called Video on Demand (VOD). The MOVIES & TV SHOWS screen displays recommended movies and
TV shows and displays multiple VOD content sources so you can browse and watch all more easily.
The MOVIES & TV SHOWS panel has the following main subpanels:
• Favorites: View the movies and TV programs registered as Favorites.
• Featured: View movies or TV programs grouped according to various themes, such as movies with a
specific actor or an actor who acted in a TV series, etc.
• Movies: View movies by release date, popularity, or genre.
• TV Shows: Search TV shows by air date, popularity, or genre.
• Trailers: View movie trailers for upcoming movies.
• Trending: View movies and TV programs that are the most trendy or popular on Twitter.
Basic MOVIES & TV SHOWS Panel Functions
Move the focus to a movie or TV program, and then press and hold the touch pad. An Options drop down list
appears with the following functions.
• Play Content Now: Displays the names of one or more content providers. Select a content provider to play
the selected movie or TV program immediately. If the app for the content provider you selected is not
installed on the TV, a pop-up window appears. In the pop-up window, select either to display the app’s
information page or to install the app immediately. Note that you can also install the app from the app’s
information page.
• Add to/Remove from Favorites: Add the selected content to or delete it from Favorites.
MULTIMEDIA
The MULTIMEDIA Panel lets you play media content saved on USB devices, smartphones, cameras, computers,
or in storage services. The MULTIMEDIA Panel has three main subpanels: USB Drive, Network Device, and
Storage Service. USB Drive displays USB devices connected to the TV. Network Device displays devices
connected to your TV through your home network (a computer, a smart phone, etc.). Storage Service displays
services such as Dropbox and SkyDrive linked via your Samsung account to the TV.
English - 20
Allowing Connections with a Computer or Mobile Device
To play multimedia content located on a computer or mobile device on the TV, you need to:
1. Establish the connection to the computer or device.
2. Allow the connection with the computer/mobile device on the TV.
For information about establishing connections, see the “Connecting to a Computer” and “Connecting to a
Mobile Device” sections of the e-Manual.
To allow a connection with a computer or mobile device, follow these steps:
1. Press the button on the Samsung Smart Control, and then select Network Device in the MULTIMEDIA
panel. The devices connected to the TV are listed.
2. Select Options > Multimedia device settings. The devices connected to the TV are listed.
• Alternatively, select Multimedia Device Settings from the Network menu to see the list of the devices
connected to the TV.
3. Allow the connection with the device you want to connect to the TV.
Playing Content
1. If you want to play content located in a Storage Service, navigate to the Smart Hub > Samsung Account
menu, and then select Log In to sign in to your Samsung account. If you want to play content located on a
device connected to the TV using Samsung Link, go to Step 2 below.
2. Press the button, and then select Network Device or Storage Service in the MULTIMEDIA panel. The
devices or storage services connected to the TV appear.
3. Select a device or storage service. The folders and files shared by the selected device or storage service
appear.
4. Select the media content you want to play from the list.
English - 21
05. Using the e-Manual
Launching the e-Manual
MENU > Support > e-Manual
The embedded e-manual contains information about your TV's key features.
Alternatively, you can download a copy of the e-manual from Samsung's website, and read it on your
computer or print it out.
Words in yellow (e.g., Picture Mode) indicate a menu item and bold words in white (e.g., Smart Hub)
indicate remote control buttons.
Arrows are used to indicate the menu path. (Example: MENU > Picture > Picture Mode)
1. On the Samsung Smart Control, press the KEYPAD button, and then select e-Manual on the On-Screen
Remote. You can also select Support > e-Manual in the TV's menu.
2. Select a category from the left side of the screen. Once a selection has been made, the contents of the
selected category appear on the right side of the screen.
3. Select an item from the list. This opens the e-manual on the corresponding page.
If a description doesn't fit on a single screen...
• Position the focus on the page to display / on the screen. Press the
<
or
>
buttons to scroll the
page up and down.
Additional e-Manual Features
Loading Pages using Keywords
Select Search to bring up the search screen. Enter a search term, and then select Done. Select an item from the
search results to load the corresponding page.
English - 22
Loading Pages from the Index Page
Select Index to bring up the index screen. Select a keyword from the list to navigate to the relevant page.
Using History to Load Previously Read Pages
Select Opened page. A list of previously read pages is shown. Select a page. The e-Manual jumps to the
selected page.
Accessing the Menu from the e-Manual
Select (Try Now) from the right side of a feature-description page to access the corresponding menu item
and try out the feature right away. If you want to read the e-Manual entry on a specific screen menu feature:
• On the Samsung Smart Control, press the KEYPAD button, and then select e-Manual on the On-Screen
Remote to load the corresponding e-Manual page.
The e-Manual cannot be accessed from some menu screens.
Loading Reference Pages
Select (Link) from the right side of a feature-description page to access the corresponding reference page.
Updating the e-Manual to the Latest Version
You can update the e-Manual in the same way you update apps.
1. Press the button, and then highlight the e-Manual item in the SAMSUNG APPS screen.
2. On the Samsung Smart Control, press and hold the touch pad. A pop-up menu appears.
3. Select Update Apps from the pop-up menu. A pop-up window appears.
Update Apps appears on the screen only when an update is available.
4. Select e-Manual in the popup window, and then select Update.
Configuring Auto Update
MENU > Smart Hub > Apps Settings
To update the e-manual automatically, navigate to the Smart Hub > Apps Settings menu and set the Auto
Update option to On. The e-manual is updated automatically when an update becomes available.
English - 23
06. Troubleshooting and
Maintenance
Troubleshooting
If the TV seems to have a problem, first review this list of possible problems and solutions. Also, review the
Troubleshooting Section in the e-Manual. If none of the troubleshooting tips apply, visit www.samsung.com/
support or call Samsung Customer Service at 1-800-SAMSUNG (1-800-726-7864).
Issues Solutions and Explanations
Flickering and Dimming Try disabling some of the TV's energy efficiency features.
Disable Energy Saving (System > Eco Solution > Eco Sensor) and/or Energy
Saving (System > Eco Solution > Energy Saving) and check again.
Screen Color is Not Correct Run a Self Diagnosis Picture Test (Support > Self Diagnosis > Picture Test).
If the picture problem is caused by the TV, the problem should be visible
in the Picture Test. If the problem is not visible, next confirm that the TV's
video input ports are connected to the correct external video device output
ports and that none of the connections are loose. Finally, if possible, test
your external video devices by connecting them to another TV.
Screen Brightness Adjust the following settings:
Navigate to Picture and adjust Backlight, Contrast, Brightness, Sharpness,
Color, Tint (G/R) and other picture quality adjustment settings.
Blurred Images Turn on Auto Motion Plus (Picture > Picture Options > Auto Motion Plus).
Unwanted Powering Off Check if Sleep Timer (System > Time > Sleep Timer) has been enabled.
Sleep Timer automatically turns off the TV after an amount of time that
you select. If the Sleep Timer has not been enabled, see if No Signal Power
Off (System > Eco Solution > No Signal Power Off) or Auto Power Off
(System > Eco Solution > Auto Power Off) has been enabled. No Signal
Power Off turns off the TV if no signal has been received by the TV for a
specified period time. Auto Power Off turns off the TV if there has been no
user input in four hours.
Trouble Powering On Confirm that the power cord is connected and that the remote has live
batteries and is functioning correctly. If the power cord is connected
properly and the remote control is operating normally, there might be
a problem with the antenna cable connection or the cable/satellite box
might not be turned on. Check the antenna connection or turn on the
cable/satellite box.
Stand Assembly If you have any trouble assembling the stand, review the stand assembly
instruction in the Quick Start Guide.
Cannot Find a Channel Re-run Setup (Go to MENU > System > Setup) or run Auto Program. (Go to
MENU > Broadcasting > Auto Program).
For detailed troubleshooting information, watch the troubleshooting videos at www.samsung.com/spsn.
English - 24
Issues Solutions and Explanations
The TV won’t turn on. Make sure the AC power cord is securely plugged in to the wall outlet and
the TV.
Make sure the wall outlet is working.
Try pressing the
P
button on the TV to make sure the problem is not the
remote. If the TV turns on, refer to “Remote control does not work” below.
There is no picture/video. Check the cable connections. Remove and reconnect all cables connected
to the TV and external devices.
Set the video outputs of your external devices (Cable/Sat Box, DVD, Blu-
ray etc) to match the TV's input connections. For example, if an external
device’s output is HDMI, it should be connected to an HDMI input on the
TV.
Make sure your connected devices are powered on.
Be sure to select the correct input source.
Reboot the connected device by unplugging it, and then reconnecting the
device’s power cable.
The remote control does not
work.
Replace the remote control batteries. Make sure the batteries are installed
with their poles (+/–) in the correct direction.
Clean the sensor’s transmission window on the remote.
Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote
control doesn’t turn the
TV on or off or adjust the
volume.
Program the Cable/Set remote control to operate the TV. Refer to the
Cable/Set-Top-Box user manual for the SAMSUNG TV code.
This TFT LED panel is made up of sub pixels which require sophisticated technology to produce. There
may be, however, a few bright or dark pixels on the screen. These pixels will have no impact on the
performance of the product.
To keep your TV in optimum condition, upgrade to the latest software. Use the Update Now or Auto
Update functions on the TV's menu (Screen MENU > Support > Software Update > Update now or Screen
MENU > Support > Software Update > Auto Update).
English - 25
Network Troubleshooting
How to Improve Your Wireless Signal
Position your wireless router, modem router, or access point in a central location.
The best place for a Wi-Fi router is in the center of your home.
If that is not possible, move it as close to the center of your home as possible. Avoid putting it in a corner.
Single Story
Bad Router Position Good Router Position
Multi Story
Bad Router Position Good Router Position
English - 26
Adding a wireless repeater
A wireless repeater is a device which extends your wireless network's range without requiring you to add any
wiring. All you need to do is place the repeater halfway between your wireless router and your TV, and you will
get an instant boost in your wireless signal strength.
Single Story Multi Story
Wireless router
Wireless repeater
Do not locate the router on the floor and keep it away from walls and metal objects
Avoid placing the router near objects such as metal filing cabinets. Metal objects, walls, and floors will
interfere with your router's wireless signal. The closer your router is to these obstructions, the more severe the
interference, and the weaker the signal.
Reduce wireless interference
The most common wireless technology, 802.11g (wireless-G), operates at a frequency of 2.4GHz. Many
cordless phones, microwave ovens, baby monitors, garage doors, and other wireless devices also use this
frequency. Reduce interference by avoiding wireless devices that use the 2.4GHz frequency and use devices
that communicate via the 5.0 GHz frequency instead.
Replace your router's antenna
If you must place your router in the corner, consider replacing
your standard antenna with a Hi-Gain wireless antenna.
High gain antennas can be attached to most wireless routers.
They boost the signal strength and aim the signal in one
direction.
English - 27
Intermittent Wi-Fi
• Check the distance between the Modem/Router and the TV. The distance should not exceed 50ft (15.2
m).
• Verify that there are no obstacles between your TV and the Modem/Router.
(Appliances, cordless phones, stone walls/fireplaces, etc. decrease Wi-Fi strength.)
• Check the cable that connects the Modem to the Router (if you use a separate Modem and Router) to see
if it is in good condition. If it is not, replace the cable.
• Connect the TV to your Modem/Router using a CAT 7 cable, and then try to set up a wired network
connection. (MENU > Network > Network Settings).
•Check Network Status (MENU > Network > Network Status) to see if the IP address is invalid, for example,
169.x.x.x. If it is, call your ISP to get a valid IP address, and then ask them to check the connection
between your Modem and Router and the connection between the Modem / Router and the Internet.
• If you see a valid Mac address, call your ISP and ask them to reset your network circuit to re-register the
Mac addresses of your new Modem/Router and the TV.
Netflix problems
• Verify that your Modem/Router is no more than 50 ft (15.2 m) away from the TV.
• Change the DNS to 8.8.8.8. Select MENU > Network > Network Status > DNS Server > Select Manually >
DNS > enter 8.8.8.8 > OK
• Verify that the ESN for Netflix is valid. (Go to MENU > Support > Contact Samsung)
Reset Netflix by selecting MENU > Smart Hub > Smart Hub Reset.
Smart Hub Error Messages
• Verify that the distance between the TV and the Modem/Router does not exceed 50 ft (15.2 m).
• Verify that the TV is connected to the network by checking the Network Status (MENU > Network >
Network Status).
• Reset Smart Hub by selecting the MENU > Smart Hub > Smart Hub Reset.
• Update the TV’s software (MENU > Support > Software Update).
• Wait 2 to 3 days for the issue to resolve itself.
English - 28
Eco Sensor and Screen Brightness
Eco Sensor measures the light in your room and optimizes the brightness of the TV automatically to reduce
power consumption. This causes the TV to brighten and dim automatically. If you want to turn this off, go to
MENU > System > Eco Solution > Eco Sensor.
Do not block the sensor with any object. It can decrease picture brightness.
Preventing burn-in.
Avoid keeping a still picture or a picture with static elements (black bars, black borders, logos, etc.) on your
TV for more than two hours at a time. If that is unavoidable, change the picture or change to another channel
for a minute or two every couple of hours. Reducing the brightness and contrast of the screen when it is
displaying static elements will also help.
English - 29
Getting Remote Support
Samsung Remote Support service offers you one-on-one support with a Samsung Technician who can
remotely:
• Diagnose your TV
• Adjust the TV settings for you
• Perform a factory reset on your TV
• Install recommended firmware updates
How Does Remote Support Work?
Having a Samsung Tech remotely service your TV is easy.
1. Call the Samsung
Contact Center
and ask for remote
support.
2. Open the menu on
your TV and go to
the Support section.
3. Select Remote
Management,
and then read and
agree to the service
agreements. When
the PIN screen
appears, provide the
PIN number to the
agent.
4. The agent will then
access your TV.
That's it!
Caring for the TV
If a sticker was attached to the TV screen, some debris can remain after you remove the sticker. Please
clean the debris off before watching TV.
The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and
screen carefully using a soft cloth to prevent scratches.
Do not spray water or any liquid directly onto the TV.
Any liquid that goes into the product may cause a
failure, fire, or electric shock.
Turn off the TV, and then gently wipe away smudges
and fingerprints on the screen with a micro-fiber
cloth. Clean the body of the TV with a soft cloth
dampened with a small amount of water. Do not
use flammable liquids (benzene, thinners, etc.) or a
cleaning agent. For stubborn smudges, spray a small
amount of screen cleaner on the cloth.
English - 30
07. Specifications, wall mounting,
and other information
Specifications
Display Resolution 1920 x 1080
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
Stand Swivel (Left / Right) 0˚
Model Name UN46H7150 UN55H7100 / UN55H7150
Screen Size
(Diagonal)
46˝ Class
(45.9 measured diagonally)
55˝ Class
(54.6 measured diagonally)
Sound
(Output) 40W (Left:10W, Right:10W, Woofer:20W)
Dimensions (W x H x D)
Body
With stand
40.6 x 23.5 x 1.3 inches
(1033.3 x 596.9 x 33.2 mm)
40.6 x 25.1 x 8.2 inches
(1033.3 x 639.2 x 208.8 mm)
48.2 x 27.8 x 1.3 inches
(1224.8 x 706.9 x 33.2 mm)
48.2 x 29.4 x 10.5 inches
(1224.8 x 747.5 x 267.7 mm)
Weight
Without Stand
With Stand
24.9 lbs (11.3 kg)
27.5 lbs (12.5 kg)
32.6 lbs (14.8 kg)
36.8 lbs (16.7 kg)
Model Name UN60H7100 / UN60H7150 UN65H7100 / UN65H7150
Screen Size
(Diagonal)
60˝ Class
(60.0 measured diagonally)
65˝ Class
(64.5 measured diagonally)
Sound
(Output) 40W (Left:10W, Right:10W, Woofer:20W)
Dimensions (W x H x D)
Body
With stand
53.6 x 31.2 x 1.3 inches
(1362.1 x 792.7 x 34.2 mm)
53.6 x 32.7 x 10.5 inches
(1362.1 x 833.1 x 267.7 mm)
56.9 x 32.9 x 1.3 inches
(1447.3 x 836.4 x 35.2 mm)
56.9 x 34.8 x 11.8 inches
(1447.3 x 886.1 x 301.8 mm)
Weight
Without Stand
With Stand
42.1 lbs (19.1 kg)
46.5 lbs (21.1 kg)
49.3 lbs (22.4 kg)
55.1 lbs (25.0 kg)
English - 31
Model Name UN75H7100 / UN75H7150
Screen Size
(Diagonal)
75˝ Class
(74.5 measured diagonally)
Sound
(Output) 40W (Left:10W, Right:10W, Woofer:20W)
Dimensions (W x H x D)
Body
With stand
65.7 x 37.8 x 1.4 inches
(1670.2 x 962.6 x 36.4 mm)
65.7 x 39.8 x 12.4 inches
(1670.2 x 1012.3 x 316.9 mm)
Weight
Without Stand
With Stand
74.9 lbs (34.0 kg)
81.7 lbs (37.1 kg)
Design and specifications are subject to change without prior notice.
The actual appearance of the TV may differ from the images in this manual, depending on the model.
This device is a Class B digital apparatus.
For information about the power supply, and more information about power consumption, refer to the
label attached to the product.
Typical power consumption is measured according to Energy Star Program requirements for Televisions.
Dispose unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website:
www.samsung.com/recyclingdirect or call, (877) 278 - 0799
Decreasing Power Consumption
When you shut the TV off, it enters Standby mode. In Standby mode, it continues to draw a small amount of
power. To decrease power consumption, unplug the power cord when you don't intend to use the TV for a
long time.
English - 32
Dimensions
Port panel detail / Rear view
4
1
23
5
The displayed image may differ depending on the model.
(Unit: inches)
Model name 12345
UN46H7150 5.1 5.0 5.8 11.4 10.3
UN55H7100 / UN55H7150 5.1 5.0 7.1 13.5 12.8
UN60H7100 / UN60H7150 5.1 5.0 9.8 16.2 14.5
UN65H7100 / UN65H7150 5.1 5.0 10.0 17.6 12.1
UN75H7100 / UN75H7150 5.1 5.0 14.3 22.0 14.5
All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to
the dimensions before installing your TV. Not responsible for typographical or printed errors.
2014 Samsung Electronics America, Inc
English - 33
Licenses
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing LLC in the United States and other countries.
Still image warning
Avoid displaying still images (such as jpeg picture files), still image elements (such as TV channel logos, stock
or news crawls at the screen bottom etc.), or programs in panorama or 4:3 image format on the screen.
Constantly displaying still pictures can cause image burn-in on the LED screen, which will affect image quality.
To reduce risk of this effect, please follow the recommendations below:
• Avoid displaying the same TV channel for long periods.
• Always try to display any image in full screen. Use the TV set’s picture format menu for the best possible
match.
• Reduce brightness and contrast to avoid the appearance of after-images.
• Use all TV features designed to reduce image retention and screen burn. Refer to the e-Manual for details.
English - 34
Mounting the TV on a Wall Using the Wall Mount Kit
(Optional)
If you mount this product on a wall, it should be mounted only as recommended by the
manufacturer. Unless it is correctly mounted, the product may slide or fall, causing serious
injury to a child or adult, and serious damage to the product.
Installing the Wall Mount Kit
The wall mount kit (sold separately) lets you mount the TV on the wall.
For detailed information about installing the wall mount, see the instructions provided with the wall mount
kit. We recommend you contact a technician for assistance when installing the wall mount bracket. We do not
advise you to do it yourself. Samsung Electronics is not responsible for any damage to the product or injury to
yourself or others if you select to install the wall mount on your own.
To order the wall mount kit, contact Samsung Customer Care at 1-800-SAMSUNG (1-800-726-7864).
Installing a Wall Mount Using the Wall Mount Adapter
Wall mount adapters are provided only with 65-inch or bigger TV's.
Before installing any wall mount kit, install the wall mount adapters provided with the TV.
Refer to the Installation Manual included with the Samsung wall mount kit.
VESA Wall Mount Kit Notes and Specifications
Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces
other than plaster board, please contact your nearest dealer for additional information. If you install the TV on
a ceiling or slanted wall, it may fall and result in severe personal injury.
Product
Family
TV size in
inches
VESA screw hole specs
(A * B) in millimeters
Standard
Screw Quantity
LED-TV
40 200 X 200
M8 4
46 - 75 400 X 400
English - 35
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury from
electric shock.
Standard dimensions for wall mount kits are shown in the table.
Samsung wall mount kits contain a detailed installation manual, and all parts necessary for assembly are
provided.
Do not use screws that do not comply with VESA standard screw specifications.
Do not use screws that are longer than the standard length or do not comply with VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the TV set.
For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws
may differ depending on the wall mount specifications.
Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to
personal injury. Samsung is not liable for these kinds of accidents.
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall
mount is used or the consumer fails to follow the product installation instructions.
Do not mount the TV at more than a 15 degree tilt.
Always have two people mount the TV on to a wall.
Providing Proper Ventilation for Your TV
When you install your TV, maintain a distance of at least 4 inches between the TV and other objects (walls,
cabinet sides, etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a fire or a
problem with the product caused by an increase in its internal temperature.
If you use parts provided by another manufacturer, it may cause difficulties with the product or result in injury
caused by the product falling.
Whether you install your TV using a stand or a wall-mount, we strongly recommend you use parts
provided by Samsung Electronics only.
Installation with a stand. Installation with a wall-mount.
4 inches
4 inches
4 inches 4 inches
4 inches
4 inches
4 inches
English - 36
Securing the TV to the Wall
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall.
In particular, ensure your children do not hang on or destabilize the TV.
Doing so may cause the TV to tip over, causing serious injuries or death.
Follow all safety precautions provided in the Safety Flyer included with your
TV. For added stability and safety, you can purchase and install the anti-fall
device as described below.
To Prevent the TV from Falling
These are general instructions. The clamps, screws, and string are not supplied by Samsung. They must be
purchased separately. We suggest consulting an installation service or professional TV installer for specific
hardware and anti-fall hardware installation.
1. Put the screws into the clamps and firmly fasten them onto the wall. Confirm that the screws have been
firmly installed onto the wall.
You may need additional material such as an anchor depending on the type of wall.
2. Remove the screws from the back center of the TV, put the screws
into the clamps, and then fasten the screws onto the TV again.
These screws may not be supplied with the TV. If they are not,
purchase screws with the following specifications:
• For a 40 - 75 inches models: M8
3. Connect the clamps fixed onto the TV and the clamps fixed onto
the wall with a durable, heavy-duty string and then tie the string
tightly.
NOTE
• Install the TV near to the wall so that it does not fall backwards.
• Connect the string so that the clamps fixed on the wall are at
the same height to or lower than the clamps fixed on the TV.
• Untie the string before moving the TV.
4. Verify all connections are properly secured. Periodically check the
connections for any sign of fatigue or failure. If you have any doubt
about the security of your connections, contact a professional
installer.
English - 37
Federal Communication Commission
Interference Statement
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
FCC Caution: Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
this equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
For product available in the USA/Canada market, only
channel 1~11 can be operated. Selection of other
channels is not possible.
This device and its antenna(s) must not be co-located
or operation in conjunction with any other antenna
or transmitter.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20cm between the radiator &
your body.
Warranty Information
IMPORTANT WARRANTY INFORMATION REGARDING TELEVISION FORMAT VIEWING
See the warranty card for more information on
warranty terms.
Wide screen format LED Displays (with 16:9 aspect
ratios, the ratio of the screen width to height) are
primarily designed to view wide screen format full-
motion video. The images displayed on them should
primarily be in the wide screen, 16:9 ratio format,
or expanded to fill the screen, if your model offers
this feature, with the images constantly in motion.
Displaying stationary graphics and images on the
screen, such as the dark sidebars on non-expanded
standard format television video and programming,
should be limited to no more than 5% of the total
television viewing time per week.
Additionally, viewing other stationary images and
text such as stock market crawls, video game
displays, station logos, web sites or computer
graphics and patterns, should be limited as described
above for all televisions.
Displaying stationary images that exceed the above
guidelines can cause uneven aging of LED Displays
that leave subtle, but permanent burned-in ghost
images in the LED picture. To avoid this, vary the
programming and images, and primarily display full
screen moving images, not stationary patterns or
dark bars. On LED models that offer picture sizing
features, use these controls to view different formats
as a full screen picture.
English - 38
Be careful about the television formats you select and
the length of time you view them. Uneven LED aging
as a result of format selection and use, as well as
burned in images, are not covered by your Samsung
limited warranty.
• SAMSUNG ELECTRONICS NORTH AMERICAN
LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions,
exclusions and limitations of the original Limited
Warranty supplied with Samsung Electronics
(SAMSUNG) products, and the requirements,
conditions, exclusions and limitations contained
herein, SAMSUNG will additionally provide
Warranty Repair Service in the United States on
SAMSUNG products purchased in Canada, and in
Canada on SAMSUNG products purchased in the
United States, for the warranty period originally
specified, and to the Original Purchaser only.
The above described warranty repairs must be
performed by a SAMSUNG Authorized Service
Center. Along with this Statement, the Original
Limited Warranty Statement and a dated Bill of
Sale as Proof of Purchase must be presented
to the Service Center. Transportation to and
from the Service Center is the responsibility of
the purchaser. Conditions covered are limited
only to manufacturing defects in material or
workmanship, and only those encountered in
normal use of the product.
Excluded, but not limited to, are any originally
specified provisions for, in-home or on-site
services, minimum or maximum repair times,
exchanges or replacements, accessories, options,
upgrades, or consumables.
For the location of a SAMSUNG Authorized
Service Center, please call toll-free:
In the United States: 1-800-SAMSUNG (1-
800-726-7864)
In Canada: 1-800-SAMSUNG
SAMSUNG BRAND PRODUCTS
LIMITED WARRANTY TO ORIGINAL
PURCHASER
This SAMSUNG brand product, as supplied and
distributed by SAMSUNG and delivered new, in the
original carton to the original consumer purchaser,
is warranted by SAMSUNG against manufacturing
defects in materials and workmanship for period of:
(90 Days Parts and Labor for Commercial Use)
Categories Parts Labor Size Service
LCD/LED TV 1 Year 1 Year
39" and
Larger
Carry-In or
In Home
37" and
Smaller Carry-In
Plasma
Display 1 Year 1 Year All Carry-In or
In Home
3D Glasses 1 Year 1 Year - Carry-In or
Pick up
** 180 Days after Purchasing and 600 Hours of Use
Lamp on Projector
This limited warranty begins on the original date of
purchase, and is valid only on products purchased
and used in the United States. To receive warranty
service, the purchaser must contact SAMSUNG for
problem determination and service procedures.
Warranty service can only be performed by a
SAMSUNG authorized service center. The original
dated bill of sale must be presented upon request
as proof of purchase to SAMSUNG or SAMSUNG's
authorized service center.
SAMSUNG will repair or replace this product, at our
option and at no charge as stipulated herein, with
new or reconditioned parts or products if found to be
defective during the limited warranty period specified
above. All replaced parts and products become the
property of SAMSUNG and must be returned to
SAMSUNG. Replacement parts and products assume
the remaining original warranty, or ninety (90) days,
whichever is longer.
English - 39
Certain products are eligible for In-home service at
Samsung’s discretion. To receive in-home service,
the product must be unobstructed and accessible to
service personnel. If during in-home service, repair
cannot not be completed, it may be necessary to
remove, repair and return the product. If in-home
service is unavailable, SAMSUNG may elect, at our
option, to provide for transportation of our choice
to and from a SAMSUNG authorized service center.
Otherwise, and for 37" and smaller LCD/LED TV,
transportation to and from the SAMSUNG authorized
service center is the responsibility of the purchaser.
This limited warranty covers manufacturing defects
in materials and workmanship encountered in
normal, and except to the extent otherwise expressly
provided for in this statement, noncommercial
use of this product, and shall not apply to the
following, including, but not limited to: damage
which occurs in shipment; delivery and installation;
applications and uses for which this product was
not intended; altered product or serial numbers;
cosmetic damage or exterior finishes; accidents,
abuse, neglect, fire, water, lightning or other acts of
nature; use of products, equipment, systems, utilities,
services, parts, supplies, accessories, applications,
installations, repairs, external wiring or connectors
not supplied or authorized by SAMSUNG which
damage this product or result in service problems;
incorrect electrical line voltage, fluctuations and
surges; customer adjustments and failure to follow
operating instructions, cleaning, maintenance
and environmental instructions that are covered
and prescribed in the instruction book; reception
problems and distortion related to noise, echo,
interference or other signal transmission and delivery
problems; brightness related to normal aging, or
burned-in images. SAMSUNG does not warrant
uninterrupted or error-free operation of the product.
THERE ARE NO EXPRESS WARRANTIES OTHER
THAN THOSE LISTED AND DESCRIBED ABOVE,
AND NO WARRANTIES WHETHER EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, SHALL APPLY
AFTER THE EXPRESS WARRANTY PERIODS STATED
ABOVE, AND NO OTHER EXPRESS WARRANTY
OR GUARANTY GIVEN BY ANY PERSON, FIRM OR
CORPORATION WITH RESPECT TO THIS PRODUCT
SHALL BE BINDING ON SAMSUNG. SAMSUNG
SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR
PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER
BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES CAUSED BY THE
USE, MISUSE OR INABILITY TO USE THIS PRODUCT,
REGARDLESS OF THE LEGAL THEORY ON WHICH
THE CLAIM IS BASED, AND EVEN IF SAMSUNG
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. NOR SHALL RECOVERY OF ANY KIND
AGAINST SAMSUNG BE GREATER IN AMOUNT
THAN THE PURCHASE PRICE OF THE PRODUCT
SOLD BY SAMSUNG AND CAUSING THE ALLEGED
DAMAGE. WITHOUT LIMITING THE FOREGOING,
PURCHASER ASSUMES ALL RISK AND LIABILITY
FOR LOSS, DAMAGE OR INJURY TO PURCHASER
AND PURCHASER’S PROPERTY AND TO OTHERS
AND THEIR PROPERTY ARISING OUT OF THE USE,
MISUSE OR INABILITY TO USE THIS PRODUCT
SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY
THE NEGLIGENCE OF SAMSUNG. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE
OTHER THAN THE ORIGINAL PURCHASER OF THIS
PRODUCT, IS NONTRANSFERABLE AND STATES
YOUR EXCLUSIVE REMEDY.
Some states do not allow limitations on how long an
implied warranty lasts, or the exclusion or limitation
of incidental or consequential damages, so the above
limitations or exclusions may not apply to you. This
warranty gives you specific legal rights, and you may
also have other rights which vary from state to state.
To obtain warranty service, please contact SAMSUNG
at:
Samsung Electronics America, Inc.
85 Challenger Road
Ridgefield Park, NJ 07660-2112
1-800-SAMSUNG 726-7864 – www.samsung.com
1-800-749-0260: Projectors only
The benefits of this Limited Warranty extend only
to the original purchaser of Samsung products
from an authorized Samsung reseller. THIS LIMITED
WARRANTY SHALL NOT APPLY TO ANY SAMSUNG
PRODUCTS PURCHASED FROM UNAUTHORIZED
RESELLERS OR RETAILERS, EXCEPT IN STATES WHERE
SUCH RESTRICTION MAY BE PROHIBITED. For a list
of Samsung authorized retailers, please go to: http://
www.samsung.com/us/peaceofmind/authorized_
resellers.html.
2014 Samsung Electronics Co., Ltd. All rights reserved. BN68-05934A-01
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
Country Customer Care
Center
Web Site Address
CANADA 1-800-SAMSUNG
(726-7864)
www.samsung.com/ca/
support (English)
www.samsung.com/ca_fr/
support (French)
Samsung Electronics Canada Inc. 2050
Derry Road West, Mississauga, Ontario
L5N 0B9 Canada
U.S.A 1-800-SAMSUNG
(726-7864)
www.samsung.com/us/
support
Samsung Electronics America, Inc. 85
Challenger Road Ridgefield Park, NJ
07660
I
111111111111111111111111
BN68-05937 A-00
Taking
the
TV
Out
of
the
Box
rl
~
~
~~
L.....__.
YJ
• Warning:
Do not touch the TV's
screen when you take
it out
of
the box. Hold it
by
its edges
only.
If you
touch the screen, you
can cause the TV panel
to
crack.
Included
in
the
Box
Remote Control
R
ec
ommendation 1 :
Two people should
remove the TV from the
box as shown above.
When removing the
TV,
hold it by its edges
only.
Do not touch the
screen.
• Recommendation
2:
If only one person is
available
to
remove
the TV from the box,
remove it as shown
in
the illustration above.
Hold the TV
by
its
edges. Do not touch
the screen.
Stand Parts and Cables
x2
Samsung
Remote
Batteries
Base
Stand Cover Stand Neck
Smart Control Control
(2
AA,
2
AAA)
Also included
• User manual
• Regulatory guide
• 3D Active Glasses
(
~
~llltO
9x4
Wall Mount Adapter
(65
1nches
models)
x2
u
Screws
(x
12)
Cable
Holder
Power
Cord
IR
Extender
I
X12
(M4XL14) 1
·.
1 Locate the Base, Stand Cover,
Stand Neck and Screws
in
the box
and set them aside.
J
' '
'"'
..........
' '
~
'',~-
-
-----------------
',
'
I
I
I
I
:A .
' I
~------------------------------'
3
Fit
the Base and Stand Neck
together, making sure the notch
on
the Stand Neck aligns with the
stand.
2 Locate the
TV
on a soft surface,
screen side down. Use the packing
material to protect the screen.
.........
-------
..
,
.
/x
8
(M4
X
L14
) l
.
.
I
.
.
.
I
.
I
4 Assemble each side of the Base
and Stand Neck, inserting 4 screws
each.
. '
...
"'.
-.~
;-
,.{
3
"'
····
.
. .
;.::
...
·..
.
'.•
·•··•··
' - -.
Connection
panel
on
the
back of the
TV
I
wsu.:J
fl
nternet
After
you
have
connected
all
your
external devices, plug
the
1V's power cord into the back
of
the
TV.
DO NOT
plug
it into
a
wall
outlet
until
you
have
reached
Section
7,
Initial
Setup.
00
I
~
Connect
here
with
an
Ethernet cable or
wirelessly
later during the
Initial
Setup.
SA)
00
~
1
I
~
I
~
0
CiiiOOD
[jJ
[jJ
I
~
)
(AUDIO
OUT)
bmmJ
I TV signal
Connect your
coaxial
cable to the
Antenna
In
port.
COMPONENT
/AVIN
f3
<t
~
DIGrTAl l
o
AUDIOOUT
8 (OPTICAL)
·
~
•
•
~
[jJ
0
li&lli!KJ
le
)>
c
0
• 0
~
r Cable/Satellite/OVA
Connect your set-top box or
digital
video
recorder with
an
HDMI
cable.
'
Blu-ray/DVD/Home Theater
Connect your video player using an
HDMI cable.
Game console
oo~
oo~
w~
l
Connect your game console or
PC/DVI using an HDMI cable.
___
_,
[I~
'---1
1
~
(
~
<J
~
IROVT
• •
• •
I
~
0~
(AUOIOOVT)
0
.
~
f'A
udio
Connect a receiver/home theater
using an optical audio cable.
)
You
can control your set-top-box
or
satellite box with the Samsung Smart Control.
To
establish control, you must first set
up
theIR
extender cable. If you
don't
have an STB,
skip this section.
1 Connect
theIR
extender cable
to
the TV's
IR
output connector.
[EJ~
OOJ~
001~
[I~
I~
I
~
~
0~
IR Out
Connect the
IR
Extender Cable here.
Place the transmitter
end within 4 inches
of the set-top-box's
remote control receiver.
~
Position the transmitter end within 4 inches
(1
0 em)
of
the set -top-box's remote
control receiver, pointing
in
the direction
of
the receiver. Make sure there are no
obstacles between
the
transmitter end
of
theIR
extender cable and the set-
top-box
or
satellite box. Any obstacles will interfere with the transmission
of
the
remote control signals.
: Finalize control
of
your
set-top
or
satellite box when you run Initial Setup.
..
Introducing
th
,e
Samsung
Smart Control
Your
1V
comes with a Samsung Smart Control. Unlike conventional remote controls
that have only buttons, the Samsung Smart Control has:
Buttons for quick access
to
frequently used functions.
A motion sensor that lets you move the pointer
or
focus on the screen by simple
moving the Samsung Smart Control.
Inserting
the
Batteries
0 0 0
1 Gently pull on the notch
in
the battery cover. When
the
cover comes loose,
remove the cover completely.
2 Insert 2 AA alkaline batteries, making sure
to
align the positive and negative
polarities correctly.
~
Place the battery cover on the remote control, and then press the
top
part
of
the
cover into the control.
Press the catches on both sides
of
the battery cover
in
the order shown
in
the
figure above until the cover is completely attached to the remote control.
Using
the
Samsung
Smart
Control
When you start the
1V
for the first time by pressing the
1V
button on the Samsung
Smart Control, the
1V
and the Smart Control
pair,
using the 1V's Bluetooth function.
Once the
1V
and Smart Control have paired, you can use the Smart Control to operate
thelV
Using Motion Sensor Control
Place a finger on the touch pad, and then move
the Samsung Smart Control. A pointer appears
on the screen. Move the Samsung Smart Control.
The pointer moves
in
the direction you moved
the Samsung Smart Control. If you stop using the
Motion Function, even momentarily, put your finger
on the touch pad, and then move the Samsung
Smart Control again
to
re-start the function.
Moving the Focus, Pointer,
or Cursor Using the
Directional Buttons
Press the directional buttons (up, down,
left, and right) to move the focus,
pointer,
or
cursor
in
the direction you
want.
Selecting an Item/Entering a
Menu by Pressing the Touch
Pad
To
enter a menu
or
select
an
item,
highlight the item
or
the menu title,
or
move the pointer over it, and then press
the touch pad.
Pairing
the
Samsung
Smart
Control Again
If you need
to
re-establish the connection between the
1V
and the Samsung Smart
Control, point the Samsung Smart Control at the remote control sensor
of
the
TV,
and
then press the RETURN button and GUIDE button simultaneously for 3 seconds.
When you turn on your
1V
for the first time, it immediately starts the Initial Setup.
During Initial Setup, your
1V
pairs with the Samsung Smart Control, connects
to
your
home network, implements Smart
Hub
agreements, links
to
the source
of
your live
1V
signal, and sets
up
control
of
your set-top or satellite box.
Information
You
Need
Have the following information on hand
before you turn on your
1V
for the first
time:
..
Your wireless network's password.
(Make sure
your
network is on.)
Your Postal
or
Zip code.
The name and location
of
your cable
or
satellite provider (if you use one).
Running
Initial
Setup
1 Plug your TV into a wall outlet.
2 Aim the Samsung Smart Control
at
the 1V.
Internet Access
The
1V
must
be connected to the Internet
to
use the Smart Features. If you have
a wireless network, confirm that your
network router
is
working before you
start the initial setup. If you have a wired
network, connect the
1V
to
the network
with an Ethernet cable before you begin
(CAT 7 cable preferred).
.
~
..
. ~
.-
..
..
..
"?,.··
~·
..
\
•.
:
·...
. .
·.
.
...........
.
3 Press the
TV
button
on
the Samsung
Smart Control
to
turn on the 1V,
and
then follow
the
directions on the
screen.
Once your Samsung Smart Control pairs, you can use the Samsung Smart Control's
motion sensor function
to
move the pointer on the screen.
To
use the motion sensor
function, rest a finger on the touch pad, and then move the Samsung Smart Control.
To
select items, press the touch pad.
To
learn more about operating your
1V
and its Smart Features, see your 1V's user's
manual
or
launch the 1V's built in e-Manual. Congratulations on the purchase
of
your
new
Smart 1V!
Common
issues
Can't Connect to Network or
Apps (For Internet supported
model only)
• Make sure the
TV
has a network
connection
(MENU>
Network>
Network status).
• Contact your Internet service provider.
No Picture/Sound or Distorted
Picture/Sound from an External
Device
• Make sure your connection to the
device
is
correct.
• Perform a
TV
Self Diagnosis to identify
the problem
(MENU>
Support>
Self
Diagnosis > Sound
or
Picture
Test).
• Change the picture size (Use the
"P.Size"
button on your remote).
Poor Picture Quality
• Select High Definition
(HD)
channels
or programs.
Your Settings are Lost after 30
Minutes
• Change to Home Mode (MENU >
Support > Use Mode > Home Use).
"Weak or No Signal" Displayed
in
TV Mode/Cannot Find Channel
• Press the SOURCE button on your
remote.
•
If
the
TV
is
not connected to a cable
or satellite box, run Auto Program
to search for channels
(MENU>
Broadcasting > Auto Program).
Can't See
All
Apps or Apps Not
Working
• Reset Smart Hub
(MENU>
Smart
Hub > Smart Hub Reset).
The stand
is
wobbly or crooked
• Make sure the indicator arrows on the
stand and stand holder are properly
aligned.
The TV won't turn
on
• Make sure
all
cables are fully inserted
and that the remote has batteries
installed.
My
remote, gestures, and/or
voice does not work
• The TV ships with protective stickers
covering some
of
the sensors. Make
sure
all
of the stickers have been
removed.
,
More
help
REQUIRE ASSISTANCE
WITH YOUR PRODUCT?
Purchase any Samsung
TV
and you'll
enjoy the convenience of Samsung
Service.
If
you require any assistance with
your
TV,
first try any of Samsung's helpful
support options listed here.
Troubleshooting
• For more quick solutions to common
issues, see Troubleshooting and
Maintenance
in
the user's manual.
Built-in user manual
• On the Samsung Smart Control,
press the
KEYPAD
button, and then
select e-Manual on the On-Screen
Remote.
You
can also select Support
> e-Manual
in
the TV's menu.
Scan the QR code to view our
helpful How-to Videos
Scan this with your
smart phone to see
helpful videos.
Tech Support and Chat
• www.samsung.com/support
Remote Support
• Samsung Remote Support service
offers you one-on-one support with
a Samsung Technician
who
can
remotely diagnose your
TV.
For Remote Support:
1 Call the Samsung Contact Center
at 1-800-SAMSUNG and ask for
remote support.
2 Open the menu on your TV and go to
the Support section.
3 Select Remote Management, and
then read and agree to the service
agreements. When the
PIN
screen
appears, provide the
PIN
number to
the agent.
4 The agent accesses your
TV.
If
you experience issues, please do not take the
TV
back to the store.
In
the United States of America, call us at 1-800-SAMSUNG (1-800-726-7864) or
visit us at www.samsung.com or www.samsung.com/spsn for support and warranty
service.
3D
Active
Glasses
SSG-5150GB
The
TV
user
guide
's
desc
np
tlo
n
of
t
h1s
p
ro
duct m
ay
be
not
accurate
,
so
aM•ays
ref
er
to
thi
s
guide
.
~
:
User's
Guide
Features
Samsu
n
g's
SSG-5150G
B
3D
glasses
en
able
you
1o
view
3D
rmages
on
your
3D
lV
The
Samsung
30
glasses
communicate
with
Samsung
30
TVs
via
the
2.4GHz
RF
band.
~
The
Samsung
30
glasses
a
re
only
compa
ti
ble
with
Samsung
D,
E,
and
F
se
r
ies
3D
TV
's
that
were
released
in
2011, 2012,
and
2013.
These
30
glasses
ca
n
not
be
connec
t
ed
to
other
Bluetooth
devices.
Parts
Replacing the Batteries
If
the
r
ed
LED
blinks
fNery
two
seconds
cont
in
ualty,
rep
l
ace
the
battery
with
a
new
one
.
F
ind
the
battery
holder
on
the
in
side
:
of
the
gl
asses.
Replace
a
new
battery
in
the
battery
ho
l
der
and
insert
it
in
to
the
l=:;~ll.....:::=
g!
asses.
Insert
a
coin
into
i
~
Insert
acoin
into
t
he
groove
and
turn
~
•
.·
•
the
gr
oo
.
ve
and
turn
t
he
battery
ho
l
de
r :
the
ba
t
tery
holder
counterclockwise.
:
cloclw11se
to
lock
i
t.
Til
t
the
glasses
downwards
to
Make
su
re
th
at
the
battery
is
he
ld
firmly
in
separa
te
the
battery
: pl
ace.
from
the
glasses
·
~;;;;~
_
_::::::=~
~ U
se
a
co
in
when
chang
i
ng
batteries.
Us
i
ng
other
tools
may
damage
the
groove
on
the
battery
holder.
~ I
nsert
the·+'
side
of
the
battery
into
t
he
side
marked
w~h
'+'
in
the
battery
compartment.
<tt.
To
check
the
remain
i
ng
battery
capac
i
ty,
re
fer to
the
pa
i
ri11Q
sect
i
on
in
this
manual.
Pairing
30
Active Glasses
~
What
is
Pairing?
Pa
i
ri
ng
is
the
process
of
connec
ting
30
gl
asses
and
a
30
TV
so
tha
t
the
t
wo
devices
can
excha11Qe
data.
't:!.
Ensure
your
Samsung
TV
and
3D
glasses
are
no
f
arther
than
1
9.5
in
(50
em)
apart
from
each
other
whi
le
pa
ir
ing
is in
prog
r
ess
.
+
Turning
the
glasses
on
Press
the
power
button
briefly.
The
green
LED
t
urns
on
fo
r 3
seconds.
(
Make
sure
that
30
is
ac
t
ivated
on
the
1V
before
u
sing
t
he
3D
gl
asses.)
+
Turning
the
glass
es
off
Press
the
pov-.'er
bu
tto
n b
riefly.
The
red
LED
t
urns
on
fo
r 3
secoods
+ Pe
r1orming
t
he
pairing
process
.
Turn
t
he
TV
on
and
let
it
power
up
comp
l
etely.
Pres3
and
hold
the
PO'Nef
butto
n
on
the gl
asses
.
The
gr
ee
n and
the
red
LEOs
b
li
nk
ahemately
for
2
seconds
.
+
Operating
rang
e
Recommended
view
i
ng
distance
Recommended
vie\.ving
2-6m
distance
(6
to
19
.5
ft)
Recorrnnended
pairing
50
em
or
less
distance
(19.5
in
)
~
Once
the
30
glasses
are
paired,
the
re
maini
ng
battery
capacity
is
di
splayed
on
t
he
TV
screen.
(Th
is
featu
re
only
ap
p
lies
to
Samsung
F
series
3D
TVs
and
3D gl
asses
t
hat
have
bee
n
av
ai
lable
since
20
1
3.)
(),
If
you
keep
t
rying
to
pair
t
he
gl
asses
an
d
the
TV
after
pairing
has
failed,
the
battery
level
wi
ll
decrease
significantly.
However.
th
e
battery
leve
l
will
recover
to
a
certain
degree
in
abo
ui a
minu
te.
~
The
working
di
stance
is
affected
by
the
presence
of
obstac
l
es
(a
person,
meta
l,
walls.
etc.
)
between
the
glasses
and
the
TV
and
the
st
reng
th
of
the
Bl
uetooth
si
gnal.
""'
Turn
off
the
3D
gl
asses
when th
ey
are
not
in
use
.
If
you
leave
the
3D
glasses
on.
the
battery
li
fespan
decreases.
1-
+
Pairing
steps
1. Turn
on
the
TV,
and
then move the gl
asses
within 19.5 inches of the
TV.
2.
Press
1he
p
ower
button
on
t
he
3D
gl
asses
br
i
efly.
The
3D
glasses
v.ill
power
on
and
pa
iring
will
sta
rt
.
3. T
he
message "
3D
glasses are connected to
TV.
"
will
be
displ
ayed
on
the
1V
screen when the pairing
is
successfully completed.
~
If
pairing
fails,
the
3D
glasses
will
power
off.
:;>
If
the
first
attempt
to
pair
fa
i
ls
,
power
t
he
TV
off
and
on
again
and
perform
step
2.
:;>
How
to pair again: P
ress
the
power
button
on
the
3D
glasses
fo
r
mo
re
tha
n 1
second.
<Pairing is needed again in the following situations:>
-If the
30
glasses do not function,
even
when the power button
is
pressed,
especially if the
TV
has just been a repaired.
-
If
you want to play
30
content on another Samsung
30
TV
model that
belongs to the 0,
E,
or F series released in
2011
through 2013.
You
must
pair the glasses
wi
th the other
Tv.
+
Viewing
guidelines
•
In
30 view mode. the screen may flicker under florescent ligh
ti
ng
(50Hz
-
60Hz
)
or
1hree-wave
ligh1ing.
*
In
t
his
case,
it is
advisa
ble to t
ur
n
off
t
he
light
i
ng
or
ad
j
ust
it
to
a
low
l
evel
• When switching the picture mode from
30
view, the
30
view mode
turns off, and the
30
glasses f
ail
to operate, resul ting
in
the display
not operating properly.
*
Then.
the
3D
g
lasses
turn
off.
• If you lie on your side while watching
1V
with the
30
glasses, the
picture may l
ook
darker or may not
be
visibl
e.
• If the
30
glasses are defecti
ve
or damaged, they cannot be repaired
and should be exchanged
fo
r a new pair. T
he
repair service
is
free of
charge within the warranty pe
ri
od, which, however, does
no
t cover
damage from the user' s fault.
The actual
30
effect may
be
experienced differently depending on the
viewer. The
30
effect may not
be
experienced by a person who has a
great difference of vision in the left and right eyes.
In
30
view mode, it is advisable to watch
IV
within the recommended
distance.
*
The
3D
function
of
the
glasses
may
not
w
ork
p
roperl
y
if
you
are
out
of
t
he
recommended
di
stance
fo
r
abo
ut
3
seco
n
ds.
*
If
you
stay
out
of
the
reco
mmende
d
range.
1
he
3D
glasses
lose
the
wi
reless
commun
i
ca
tio
ns
w~h
the
TV,
and
then
the
disp
l
ay
tv
ms
off
in
few
seconds
before
the
glasses
turn
off.
• The
3D
glasses may not work properly if there
are
any nearby acti
ve
30
devices or electronic or wireless communicat
ion
devices
(for
exampl
e,
a device that uses t
he
2.4GHz or 5GHz frequency range
such
as
a microwave or
AP).
In
th
is case, move t
he
devices away
from t
he
3D glasses.
• The
3D
Glasses may not work properly near met
al
objects or in
an
electromagnetic field.
In
this case, move the metal objects
or
t
he
electromagnetic device away from the
30
glasses.
• The vividness of t
he
image may be deteriorated if you wat
ch
TV
in a
locati
on
that is exposed to direct sunlight or illumi
na
tion.
CAUTION!
IMPORTANT
HEALTH
AND
SAFETY
INFORMATION
FOR
3D
IMAGES.
READ
THE
FOLLOWING
CAUTIONS
BEFORE
YOU
OR
YOUR
CHILD
USE
THE
3D
FUNCTION.
•
Adults
should
frequently
check
on
cl1
ildr
en
who
are
using
the
30
function.
If
there
are
any
complaints
of
tired
eyes,
headaches,
di
zziness
or
nausea,
stop
t
he
cl1
i
ld
fr
om
viewing
the
30
TV
and
ensure
t
hat
they
r
est.
Do
no
t
use
the
30
glasses
for
any
purpose
ot
her
tha
n
the
intended
purpose,
such
as
general
eyeglasses,
sunglasses
,
protective
goggles
.
Some
viewers
may
experience
discomfort
such
as
dizziness,
nausea
and
headact1es
whi
le
viev.ting
30
TV
.
If
you
experierce
any
of
these
symptoms,
stop
wa
t
ching
t
he
30
content,
remove
the
3D
gl
asses,
and
t
ake
a
rest.
An
extended
period
of
watcl1
i
ng
TV
in
30
view
mode
may
cause
f1-.je
fatigue.
In th
is
case,
stop
watching
the
30
co
nt
ent
i
mmediately,
take
off
t
he
30
glasses
and
al
l
ow
your
eyes
to
r
est.
Do
no
t
use
the
3D
func
t
ion
cr t
l1
e 30
glasses
while
walking
or
moving
around.
Wea
ri
ng
the
3D
glasses
'Nhi
le
moving
around
may
resu~
in
i
njury
due
to
ru
nn
ing
in
to
objects,
tripping
and/or
fall
in
g.
If
you
sleep
with
the
30
glasses
on,
the
temples
on
the
gl
asses
may
become
bro
k
en.
T
he
temples
of
ttle
30
glasses
are
unfolded.
Do
no
t
attempt
to
fold
the
temples
wi
th
ex
ces...:;
i
ve
force.
Fold
i
ng
the
temples
with
excessive
force
may
damage
th
e 30 gl
asses.
Danger
of
explosion
if
battery
is
incorrectly
r
eplaced.
Replace
only
with
the
same
or
equivalent
type.
SAFETY
PRECAUTIONS
The following safety instructions are
to
ensure your personal safety and
prevent property damage. Please re
ad
them to ensure the proper use of the
product.
Do
no
t
place
the
product
in
a l
oca
t
ion
exposed
to
direc
t
sun
l
igh
t,
hea
t,
fi
re,
Of
water.
Exposure
may
r
esu
lt in a
produc
t
malfunction
or
fire.
Do
not
apply
force
to
the
lenses
of
the
30
glasses.
Do
not
dr
op
or
bend
the
product.
Appty
i
ng
force.
dropp
i
ng
,
or
bend
i
ng
may
result
in
a pr
oduct
malfunction.
•
Keep
components
of
t
he
30 g
la
sses
ou
t
of
reach
of
children,
and
especially
ensure
ch
i
ldren
do
not
swa
ll
ow
one
of
the
components.
If
your
child
swallovved
a
componen
t,
consult
your
doc
t
or
immediatety.
When
cleaning
t
he
produc
t.
do
not
spray
water
or
cleane
r
di
r
ectly
onto
the
surface
of
the
prod
u
ct.
Spral,'ing
wate
r
cr
cleaner
directly
onto
the
glasses
may
result
in
f
ir
e
or
electr
ic
shock,
damage
to
th
e
procluct's
su
rf
ace
,
or
cause
the
ind
i
cator
labels
on
the
product's
surface
to
come
loose.
Do
not
apply
chemicals
contain
i
ng
alcohol,
solvent,
or
surtactant
such
as
wax
,
benzene,
thi
nner,
pest
i
cide
,
ai
r
freshener
, l
ubricant.
or
cleaner
to
the
product.
These
chem
i
cals
may
cause
the
product's
exterior
to
be
discolo
r
ed
or
cracked.
or
l
abels
or
instruct
i
ons
to
be
removed.
Use
only
a
soft
clottl
such
as
superfine
fibe
rs
or
cotton
flannels
for
cleaning
t
he
product
as
t
he
surtace
or
the
lenses
easily
cracks.
Because
the
product
can
be
easity
scratched
wrth
foreign
substances.
make
sure
to
dust
off
the
cloth
be
f
ore
using
.
•
Do
not
sieep
whi
le
wearing
the
30
glasses
.
Weari
ng t
he
30
glasses
whi
le
sleep
i
ng
may
damage
100n
.
Do
not
di
sassemble,
repair,
cr
modify
the
30
glasses
by
yourself.
Do
no
t
use
a
product
t
ha
t is
damaged.
Take
care
tha
t
you
do
not
injure
your
eyes
with t
he
edges
of
the
fr
ame
of
the
30
glasses
when
wearing
t
hem.
Put
the
30
gl
asses
on
and
take
them
off
wnh
both
hands.
Use
only
approved
batteries,
and
make
su
re
to
insert
the
batteries
in
the
correct
polarities.
If
the
batteries
are
replaced
in
the
wrong
polarities,
the
batteries
may
implode
or
leak
rt
s i
nternal
chem
i
ca
ls,
wh
i
ch
may
cause
fi
re,
infl
i
ct
inj
ury
on
users,
cr
contaminate
(damage)
rts
environment.
Keep
t
he
removed
batteries
out
of
ch
il
drens'
reach
to
prevent
ch
i
ldren
from
swallowing
them.
If
they
swal
l
ovv
them,
consu
lt
with
a
doctor
i
mmediately
.
Troubleshooting
Replace
t
he
battery
.
The
3D
gl
asses
shou
ld
be
close
to
the
TV.
Make
sure
t
hat
the
distance
between
the
TV
and
your
3D
glasses
is
less
t
han
19
.5
feet
(
6m)
in a
st
r
aig
ht
li
ne
.
~
Check
t
he
3D
function
settings
of
your
TV
.
-4
"
F-
11
3
"F
{-20"C-
45"C)
~
Product
specifications
may
be
changed
with
out
n
ot
i
ce
in
order
to
enhance
product
performance
~
The
cont
i
nuous
operating
t1
me
may
di
ffer
depending
on
the
wi
reless
commu
nica
t
ion
environment
a
nd
usage
cond
iti
ons
.
Regulatory Compliance Statements
+
FCC
COMPLIANCE
Federal
Communication
Commission
Interference Statement
1)
Changes
or modifica
ti
ons
not expressly approved
by
the party responsi
ble
for
compliance could void the
use
r'
s authority to oper
ate
the
equ
ipment.
2)
NOTE:
This
equipmen1
has
b
een
1
es1ed
and
found
1o
com
p
ly
wi1h
t
he
li
mits
for
a
Class
B di
gi1al
dev
i
ce,
pursuan11o
Part
15
of
1he
FCC
Rul
es.
These
limi1s
are
designed to provide
reasonable
protection against
harmful
interfer
ence
in
a
residential
insta
ll
at
i
on.
Th
is
equipment generat
es
,
uses
and
ca
n
ra
d
iate
radio
re
quency energy and,
if
not installed and used
in
accordance with
the instructions, may
cause
harmful interference to ra
di
o communicati
ons.
H
owever,
there
is
no
g
uaran
t
ee
that interference
wi
ll
no
t occur in a particular
installation. If this
equ
ip
ment
does cause harmful interference to
ra
dio or
televis
i
on
reception, which
can
be
determi
ned
by
tu
rn
ing
t
he
equipment off
and
on, the user is encouraged to t
ry
to correct the interference
by
one
or
more of
the
following
measures:
•
Reorien
t or
re
l
ocate
the
receiving
anten
na
•
Increase
the
separation
between
the
equipment
and
rece
i
ver.
•
Connect
the
equ
i
pment
i
nt
o
an
outlet
on a
circu
it
different
from
that
to
wh
ich
the
receiver
is
connected.
•
Cons
u
lt
the
dea
l
er
or
an
expe
ri
enced
r
adioi1V
t
echnician
for
help
.
FCC Caution: Any changes or modif cations not expressly approved by the
party r
es
ponsible for compliance
co
uld void the user's authority to operate
this equipment.
This device
comp
lies with Part
15
of the FCC Rules. Operation is
su
bject
to
the following
two
conditions: (1)
Th
is
device may not cause
ha
rmful
interference, and
(2)
this device must accept any
in
terference received,
including interference that may cause undesired operation.
+
IC
Statement
This
Class
B
digi1al
appa
r
a1us
complies
wi1h
Canadian
ICES
-
003.
Operation is subject
to
the following two conditions:
(1
) this device may
not cause interference, and
(2)
this device must accept any interference,
includi
ng
interference that may cause undesired operation of t
he
device.
Get appareil num8rique de
Ia
classe 8 est conforme a
Ia
norme NMB-003 du
Canada.
This device and its antenna(s) must not be co-locat
ed
or operation in
conjunction with any other antenna or transmitter.
CALIFORNIA USA
ONLY
This
perchlO
r
ate
warn
i
ng
appl
i
es
only
to
pr
i
mary
CR
(Manganese
Di
oxide)
Ut
hi
um
co
in
cel
ls
in
the
product
so
ld
()(distribu
t
ed
ONLY
in
Cal
:
fornia
USA
'
Perchlorate
Ma
t
erial-
special
handling
ma
y
app
l
y,
See
\Wtw.d
tsc
.ca.govlhaza
r
douswaste/perch
l
orate.'
&.
WARNING
DO
NOT
INGEST
BATIERY
,
CHEMICAL
BURN
HAZARD
[Th
e 30
Glasse
s
Supplied
w
ith]
T
his
prod
uc
t
contains
a
coin/button
ce
ll
battery.
II
the
coi
n/
button
cell
battery
is
swa
ll
owed,
it
can
cause
severe
interna
l
burns
in
jus
t 2
hours
a
nd
can
lead
to
dea
th
keep
new
an
d
used
ba
tt
eries
away
from
ch
1l
dren
If
t
he
battery
compartment
does
not
close
securely,
stop
using
the
product
an
d
keep
if
away
fr
om
ch
il
d
re
n
If
you
think
balteries
mi
ght
have
been
swa
l
lowed
or
placed
i
nside
any
part
of
the
body
seek
1
mmed
i
ate
medica
l
attent
i
on
IIBI!D
IMPORTANT SAFETY PRECAUTIONS
• Placing the television on a platform, stand, cabinet, table
or
other surface which
is:
-recommended
by
Samsung
or
sold with the product;
-secure and stable;
- sufficiently wider
in
the base than the base measurement of the television;
-strong and large enough
to
support the size and weight of
the
television.
• Pos
iti
on
in
g the television close to
the
wall to avoid the possibility
of
the television falling
wh
en pushed.
• Ensuring your television
is
installed by an authorized Samsung installer.
• Following the instructions for wall mounting
in
the installation manual and using the mounting equipment supplied
by
Samsung.
• Placing the television toward the
back
of
the furniture
or
surface on which it is placed.
• Ensuring that the television does not hang over the edge
of
the furniture
or
surface on which it is placed.
•
Not
hanging anything from
or
on
the
television.
• Anchoring both
th
e television and the furniture on which it is placed
to
a suitable support especia
ll
y
in
the case of tall furniture, such as
cupboards
or
bookcases which exceed one metre
in
height. This can be
done
by using sturdy brackets, safety straps or mounts that
are made specifically for flat screen televisions.
• Not placing any material between the television and
the
furniture on which it is placed.
• If the furniture on
wh
ich the television is placed has drawers, cabinets
or
shelves under the television,
tak
ing steps
to
prevent children
from climbing, such as installing safety latches so the doors cannot be opened.
• Keeping pets away from the television.
• Educating children about the dangers
of
climbing on furniture to reach the television
or
its control.
Failure to take these safety precautions may cause the television
to
fall from the stand or mounting equipment,
causing damage or serious injury.
Regulatory Compliance Statements
-Federal Communications Commission
(FCC)
-USA
-Industry Canada Equipment Standard for Digital Equipment (ICES-003) -Canada
-Voluntary Control Council for Interference
(VCCI)
-Japan
-Bureau
of
Standards Metrology and Inspection (BSMI) -Taiwan
-Korea Communications Commission(KCC) -Republic
of
Korea
-Italian Post Ministry (Homologation) -Italy
FCC Class A Notice
This device complies with
part
15
of
the FCC Rules. Operation is subject to the following two conditions:
1 . This device
may
not cause harmful interference, and
2. This device
must
accept any interference received, including interference that may cause undesired operation.
[E)
This equipment has been tested and found
to
comply with the limit!t for a Class A digital device, pursuant
to
Part 15
of
the FCC Rules.
These limits are designed
to
provide reasonable protection against harmful interference when the equipment
is
operated in a
co
mmercial
environment. This equipment generates, uses, and can radiate radio frequency ener
gy
and, if not installed and used in accordance with
the instruction manual, may cause harmful interference
to
radio communications. Operation
of
this equipment
in
a residential area
is
likely
to
ca
use harmful interference
in
which case the user wi
ll
be required
to
cor
rect the interference at his own expense.
FCC Class 8 Notice
This device complies with
part
15
of
the FCC Rules. Operation is subject to the following two conditions:
1. This device
may
not
cause harmful interference, and
2. This device
must
accept any interference received, including interference
th
at may cause undesired operation.
[E)
This equipment has been tested and found
to
comply with the limits for a Class B digital device, pursuant
to
Part i 5
of
the FCC
Rules. These limits are designed
to
provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if
not
installed and used in accordance with the instructions,
may cause harmful interference
to
radio communications. However, there is
no
guarantee that interference will not
occur
in a
particular installation.
If
this equipment does cause harmful interference
to
radio
or
television reception, which can
be
determined by
turning the equipment off and on,
th
e user
is
encouraged
to
try
to
correct the interference
by
one
or more
of
the following measures:
-Reorient
or
relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet
on
a circuit different from
that
to
which
the
receiver is connected.
-Consult the dealer
or
an experienced radio/TV technician
for
help.
User Information
Changes or modifications not express
ly
approved by the party responsible for compliance could void the user's authority
to
operate the
equipment. If nec
essary,
consult with your dealer or
an
experienced radio/television technic
ian
for additiona suggestions.
You
may find the
booklet called How
to
Identify and Resolve Radio/TV Interference Problems helpful. This booklet was prepared by the Federal Communications
Commission.
It
is
available from the
U.S
. Government Printing Office. Washington, DC 20402, Stock Number 004-000-00345-4.
The party responsible for product compliance:
SAMSUNG ELECTRONICS CO.,
LTD.
America
OA
Lab of Samsung
3351 Michelson Drive
Suite #290,
Irvin
e,
CA92612 USA
Warning
User must use shielded signal interface
cab
l
es
to
ma
intain FCC
comp
li
ance for
th
e product. Provided with this monitor is a detachable
power supply cord with
IE
C320 style terminations. It may
be
suitable for connection to any
UL
Listed personal
comp
uter with similar
co
nfiguration.
Be
fore making
th
e
co
nnection, make s
ur
e
th
e voltage rating
of
the
com
put
er convenience
ou
tlet is the same as the monitor
and that the ampere rating
of
the
computer
convenience
out
let is equal or exceeds the monitor voltage rating. For 1
20
Volt
app
li
ca
tions,
use only
UL
Li
sted
deta
chable
power
co
rd with NEMA
co
nfiguration 5-15P type(para
ll
el blades) plug cap. For
240
Volt applicati
ons
use
only
UL
Li
sted detachable power supply cord with NEMA configuration 6-15P
type
(tandem blades) plug
ca
p. This television receiver
provides display
of
television closed captioning
in
accordan
ce
with Section 15. i
19
of the FCC rules.
(TV
broadcast receivers with picture
screens i 3 inches or larger
in
diameter
mod
els onl
y)
lCES-003
Class
A Notice
-Avis
NMB-003,
Classe
A
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de
Ia
classe A est conforme
a
Ia
nor
me
NMB-00
3 du Canada.
lCES-003
Class
B Notice -Avis NMB-003,
Classe
B
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique
de
Ia
classe B est conforme
a
Ia
norme
NMB-003
du
Canada.
VCCl
Class
A Notice
~0)~~/;t,
?
7
:AA
1\HfHif,ij~~-c-t
o
~O)~~~~~Jl:I:Ji-cilm-t
~
c11!i.ltM~~51
~~~
T
~
c
fJ{~
~)a::
-t
o
~0)~-g.t::t;tilm~tJ(~t;JJt~~m~~-r
~J:?
~*~n~
~
c
n'~
~J
a::-t
0
VCCl Class B Notice
~O)~~(j:,
?7:AB
f~l&ftf.lij~~""('9
o
~O)~
fi:t
;t,
~~!l:tJt-cilm9
~
~
c
~
131¥-.1
c
~-ct.
'*9tJ{,
~
O)~~tJ'?
~;.t-\!=>-T
~.--
t:~
3
:,~i~mtt:::ilitt
~
-c
ilm
~
n~c,
:¥l:1~~~~51~~~9~ctJ'~~Ja::9o
ltlt&~B}l1fl::~
?""C:iE
~I..
'If~~)
t&l..'~
~
Tl'
~
l..'
o
CCC
Class
A notice -China
~~A·~~
.
~~~~-~
.
~~~~-~~d~~~~tt
.
~~Mffl~l'
.
~-
-~
m~~-~tt*UW~~ft~m•
.
BSMl
Class
A Notice
The following statement
is
applicable
to
products shipped
to
Taiwan and marked as Class A on the product
compliance labe
l.
Ji§f1!ffj:g:
~~
~•
•m
•~£·
~
@tt
=~
~~m~·
~
~-
~
~M~~-·
~~
Mm ~T
·
~m~
•
*~*~~
~
~~
~
~~~·
( €
BSMI
Class A Notice
Products with
the
CE marking comply with the EMC Directive(2004/1
08
/
EC)
and the
Low
Voltage
Directive(
2006/95
/
EC)
issued
by
the Commission
of
th
e European Community.
Comp
li
ance with these directives implies conformity to the following European Norms:
-EN55022: Radio Frequency Interference
-EN55024: Electromagnetic Immunity
of
Information Technology Equipment
-
EN61
000-3-2: Power Line Harmonics
-
EN61
000-3-3: Voltage Fluctuations
-
EN
55013: Radio disturbance characteri
st
i
cs
of
broadcast receivers and associated equipments
-EN55020: Electromagnetic immunity
of
broadcast receivers and associated equipm
European
Class
A Warning
(If
the user manual declares the product as Class A, following statement applies.)
This is a class A product.
In
a domestic environment this product may cause radio interference in which case the user may be
required
to
take adequate measures.
A-G-
7/7/
(gj.Ej!-g.
g~~t.!7/XfXH)
Ol
7171:::
~
¥~(
A8)
~::x::~m~~7171£.Ai
~
DH::X::~
.9:.:::
.A~
~::x::
~:::
Ol
~
~
-9-2.
l
o
~.AI71
I:J~2.~11j,
7~~
2.
1
2.
1
::X::IQ'l
OU.Ai
.A~~o
~
:::
-3;!
~
~~
o
£.
~L
iq.
8-G-
7/7/
(7f~g.
g~~t.f7/XfXH)
Ol
717
1
:::
7~~~(88)
~;x::~n~~~7171£Ai
-9-£
7f~Ol!A
i
Af~of:::
-3;!~
~~
0
£.
ofllj,
2.:::
::X::IQ'lOf!Ai
A~~
~
4-
<lL~Liq.
Mercury
Statement
(LCD
Monitor,
LCD
TV,
DLP
Projection
TV,
Projector
for
USA
only)
Contains Mercury, Dispose According
to
Local, State or Federal Laws
Wir
i
ng
the
Mains
Power
Supply
Plug(UK
Only)
IMPORTANT NOTICE
The mains lead
on
this equipment is supplied with a moulded plug incorporating a fuse. The value
of
the fuse is indicated on the pin face
of
the plug and, if it requires replacing, a fuse approved
to
BSI1362
of
the same rating
must
be used.
Never use the plug with the fuse cover omitted if
the
cover is detachable.
If
a replacement fuse cover is required, it must be
of
the same
colour as the pin face
of
the plug. Replacement covers are available from your dealer.
If the fitted plug is
not
suitable for the
power
points in your house
or
the cable is not long enough
to
reach a
power
point, y
ou
should
obtain a suitable safety approved extension lead
or
consult your dealer for assistance. However, if there is no alternative but to
cut
off the
plug, remove the fuse and then safely dispose
of
the plug.
Do NOT connect
the
plug
to
a mains socket as there
is
a risk of shock hazard from the bared flexible cord.
IMPORTANT
The wires
in
the
ma
i
ns
lead are coloured in accordance with the following code:
BLUE-
NEUTRAL
BROWN-
LIVE
As these colours
may
not correspond
to
the coloured markings identifying
the
terminals
in
your plug, proceed as
follows:
The wire coloured BLUE must be connected
to
the
terminal marked with the letter N
or
coloured BLUE
or
BLACK. The wire coloured
BROWN must be conn
ec
ted to the terminal ma
rk
ed with the le
tt
er L or
co
loured BROWN or RED.
WARNING:
DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH
IS
MARKED WITH THE LETTER E OR BY THE EARTH SYMBOL
, OR COLOURED GREEN OR GREEN AND YELLOW.
Italian Homologation Notice
Questo apparecchio e
fabbricato
in conformita
al
D.M.28.08.95
n.548
ed
in
particolare a
quanto
specificato nell Art.2,
comma
1.
Questo apparecchio e fabbricato nella U.E. in conformita
al
D.M.28.08.95
n.548
Art.2,
comma
1
ed
al
D.M.26.03.9
2 Art.1
-For
products
produced
in countries
except
European
Community
Questo
apparecchio e
fabbricato
in conformita al
D.M.28.08.95
n.
548
ed
in
particolare a
quanto
specif
i
cato
nell Art.2,
comma
1.
-For
products
produced
in European
Community
Questo
apparecchio e fabbricato nella U.E. in conformita al
D.M.28.08
.
95
n.548
Art.2,
comma
1 ed
al
D.M.26.03
.
92
Art.1
[BRAZIL]
Pilhas
e baterias,
ap6s
seu uso, nao
devem
ser
jogadas
em
lixo
comum.
Para evitar riscos a
saude
humana
e
ao
meio
ambiente, realize o descarte
ambientalmente adequado,
em
um
Servic;o Autorizado Samsung.
Important Safety Instructions (UL Only)
1. Read these instructions.
2. Keep these
in
structions.
3. Heed
all
warnings.
4. Follow
all
instructions.
5.
Do
not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings,
In
stall
in
accordance with the manufacturer's
in
st
ru
ctions.
8. Do not
in
stall near any heat sources such
as
radiators, heat register
s,
s
tov
es, or other appara
tu
s
(in
c
lu
ding amplifiers) that produce
h
ea
t.
9.
Do
not defeat the safety purpose
of
the polarized or grounding-type plug. A
po
larized plug has
tw
o blades with one wider than the
other. A grounding type plug has
two
blades and a third grounding prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for replacement
of
the obsolete outlet.
10.
Pr
otect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit
from the a
pp
aratus.
11.
Onl
y use attachments/accesso
ri
es specified by the manuf
ac
ture
r.
12. U
se
only with
ca
rt, stand, tripod,
br
acke
t,
or table specified by the manuf
ac
turer,
or
sold with the a
pp
aratus. When a cart is use
d,
use
caution when moving the cart/apparatus combination
to
avo
id
injury from tip-ov
er.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer
all
servicing
to
qualified service personnel. Servicing is required when the apparatus has been damaged
in
any way, such as
power-supply cord or plug
is
damaged, liquid has been sp
il
led
or objects have fall
en
into the apparatus, the apparatus has been
exposed to ra
in
or moistur
e,
does not operate norma
ll
y,
or has been
dr
o
pp
ed.
• Ventilation
Do not place the apparatus
in
a rack or bookcase. Ensure that there is adequate vent
il
ation and that you '
ve
fo
ll
owed that m
an
ufa
ct
urer's
in
struc
ti
ons for mount
in
g and
in
sta
ll
ation.
MPR
II
Compliance (MPR
II
a~plied
model only)
Thi
s mo
ni
tor comp
lie
s with SWED
AC(
MPR
II)
reco
mm
enda
ti
ons for reduced electric and m
ag
netic
fi
e
ld
s.
EU
Eco-Label
(EU
Eco-Label
applied
model
only)
Products which have model codes that end
in
XU
are
intended for the UK market. Samsung has not applied for Ecolabels for products with this
specific model code.
***
* c- *
*
\:
*
* *
Better for the environment.
..
• High Energy Efficiency
• Reduced
C0
2 emissions
• Designed
to
facilitate repair and recycling
Eu)i;!
Ecolabel
...
better for you.
www.ecolabel.eu
[...__E_u_E_c_o_la_b_e_l:
_H_u_Jo_2_2J_02
__
]
SAMSUNG Electronics makes
an
effort to develop environment-friendly product that minimizing an impact
to
environment through whole
process from getting raw materials, production, transportation, usage and end-of-life disposal by adding 'environment' on function, price,
quality, design that were the essence for product development.
These environmental characteristics are endorsed by the award of the European Eco-label (also known as the Euro Flower) issued by
the European Commission as approval of the product environmental status for energy saving, facilities for recycling and a host of other
features. The full list of criteria and more information on the ecolabel canbe found at the web-site address: http://www.ecolabel.eu
Recycling
Information
(Take-back
offer)
For recycling information for our products, please contact the company corresponding to your region of residence.
For those who reside
in
other countries, please contact a nearest local Samsung dealer for recycling information for the products
to
be treated
in
environmentally acceptable
way.
The information of Regional Takeback Schemes can be found at Samsung's web-site.
http://www.samsung.com/recycling_compliance
CIS
Only
®
CI1MBOn
«He
gnl'l
n11Lllesol1
npOAYKLIHI1»
np11MeHl'leTCl'l
B coorsercrs11e c
rexHH4eCKI1M
pernaMeHTOM
TaMo)KeHHoro
co103a
«0
6e3onacHOCTI1
ynaKOBK11»
005/2011
11
yKa3biBaer
Ha
ro,
4TO
ynaKOBKa
gaHHoro
npogyKra
He
npegHa3Ha4eHa
gnl'l nosropHoro
Hcnonb30BaHI15l
H
nogne)KI1T
yrl1nl138l.ll111.
YnaKOBKY
gaHHOro
npogyKra 3anpelllaercl'l
11cnonb30BaTb
gnl'l
xpaHeHI15l
n11Lllesol1
npOAYKLIHI1.
u CHMBon «nernl'l Me611yca» yKa3blsaer
Ha
B03MO)f{HOCTb
yr11nvt3a1..11111
ynaKOBKI1.
C11Mson
MO)f{eT
6b1Tb
,QOnOilH8H
0603Ha48HI1eM M8T8pl1afla
ynaKOBKI1
B
B11A8
1..111cf:>pOBOIO
11/11Jlvt
6yKB8HHOIO
o6o3Ha4eHHl'l.
®
C11Mson
KegeHgiK ogai\Tblf-\ 005/2011 rexHI1Kaflbll\ pernaMeHTiHe
cai1Kec
1\0nAaHblnagbl
)KaHe
OCbl
eHiMHif-1
1\amaMaCbiH
eKiHwi
per
nai1AanaHyra apHanMaraHbiH
)KaHe
)KOtOra
)KaTaTbiHbiH
KepcereAi.
0Cbl
SHiMHif-(
1\anTaMaCbiH
a3bii\-TYiliK
SHiMgepiH
Cai\Tay
ywiH nali!AanaHyra
TbiHbiM
canbiH8Abl.
u
CvtMBOil
1\anTaMaHbl
)1(010
MYMKiHAiriH
Kepcere,Qi.
C11Mson
caHAbll\
KOA
)K9He/HeMece apin
6enrinepi
rypiHAeri
1\anTaMa
MarepvtaflbiHblf-\ 6enriciMeH TOilbii\TblpbiilYbl
MYMKiH.
1111111111111111111111111111111111111111111
BN68-04972A-03