Samsung Sch A670 Us Cellular User Guide

SCH-A670 to the manual 341ad21d-ebbb-7cf4-e14f-ab37417f145f

SCH-A670 (US Cellular) - User Guide us_cellular_a670_ug Free User Guide for Samsung SCH Series Mobile Phone, Manual - page6

2015-08-20

: Samsung Samsung-Sch-A670-Us-Cellular-User-Guide-795325 samsung-sch-a670-us-cellular-user-guide-795325 samsung pdf

Open the PDF directly: View PDF PDF.
Page Count: 234 [warning: Documents this large are best viewed by clicking the View PDF Link!]

YH26.06_CB_a670_092605_F2
SCH-a670 Series
All Digital/Dual-Mode
MOBILE PHONE
User Guide
Please read this manual before operating your
phone, and keep it for future reference.
Intellectual Property
All Intellectual Property, as defined below, owned by or which is
otherwise the property of Samsung or its respective suppliers
relating to the SAMSUNG Phone, including but not limited to,
accessories, parts, or software relating there to (the “Phone
System”), is proprietary to Samsung and protected under federal
laws, state laws, and international treaty provisions. Intellectual
Property includes, but is not limited to, inventions (patentable or
unpatentable), patents, trade secrets, copyrights, software,
computer programs, and related documentation and other
works of authorship. You may not infringe or otherwise violate
the rights secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify, prepare
derivative works of, reverse engineer, decompile, disassemble,
or otherwise attempt to create source code from the software. No
title to or ownership in the Intellectual Property is transferred to
you. All applicable rights of the Intellectual Property shall
remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA),
Inc.
Headquarters: Customer Care Center:
1301 E. Lookout Drive 1601 E. Plano Parkway, Suite150
Richardson, TX 75082 Plano, TX 75074
Tel: 972.761.7000 Toll Free Tel: 1.888.987.HELP (4357)
Internet Address: http://www.samsungusa.com
©2005 Samsung Telecommunications America, Inc. is a
registered trademark of Samsung Electronics America, Inc. and
its related entities.
GH68-07736A
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Licensed by Qualcomm Incorporated under one or more of the
following patents: U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204;
5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH
THE PRODUCT, THE PURCHASER TAKES THE PRODUCT “AS
IS”, AND SAMSUNG MAKES NO EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE
MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR
ANY PARTICULAR PURPOSE OR USE; THE DESIGN,
CONDITION OR QUALITY OF THE PRODUCT; THE
PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP
OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING
CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR
ARISING FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR
BENEFITS.
Table of Contents 5
Table of Contents
Table of Contents
Section 1: Getting Started .................................9
Activating Your Phone ....................................................10
Setting Up Your Voice Mail .............................................12
Understanding This User Guide ......................................12
Section 2: Understanding Your Phone ............15
Features of Your Phone ..................................................16
Front View of Your Phone ...............................................17
Command Keys ..............................................................19
Understanding the Display ..............................................22
Battery ...........................................................................24
Your Phone’s Modes ......................................................26
Section 3: Call Functions .................................31
Making a Call .................................................................32
Answering a Call ............................................................35
Calls ..............................................................................40
Voice Mail ......................................................................44
Voice Kit .........................................................................45
Section 4: Menu Navigation ............................53
Menu Navigation ............................................................54
Menu Shortcuts ..............................................................54
Navigation Key Shortcuts ...............................................55
Navigate Using a Shortcut ..............................................55
Menu Outline .................................................................56
Section 5: Entering Text ..................................63
Changing the Text Entry Mode ........................................64
Using T9® Mode ............................................................65
Entering Upper and Lower Case .....................................66
Entering Symbols ...........................................................67
Entering Numbers ..........................................................68
Table of Contents
6
Section 6: Understanding Your Contacts ........69
Contacts .........................................................................70
Adding a New Contacts Entry ..........................................71
Finding a Contacts Entry .................................................73
Renaming a Contacts Group ...........................................75
Editing an Existing Contacts Entry ...................................76
Saving a Number After a Call ..........................................83
Deleting a Contacts Entry ...............................................85
Finding My Phone Number .............................................85
Memory ..........................................................................86
Section 7: Messaging ......................................87
Types of Messages .........................................................88
Create and Send Text Messages .....................................88
Receive Text Messages ..................................................91
Send Picture Messages in Camera Mode ........................92
Send Picture Messages in Standby Mode .......................94
Message Folders ............................................................98
Message Settings .........................................................105
Erase Messages ...........................................................108
Section 8: easyedgeSM ....................................109
Applications Shopping and Downloading ......................110
Changing Your easyedgeSM Settings .............................110
Using On-line Help ........................................................111
Section 9: Display ..........................................115
Display Settings ...........................................................116
Menu Style ...................................................................117
Animation .....................................................................117
Front Display ................................................................118
Banner .........................................................................119
Backlight ......................................................................120
Auto hyphen .................................................................121
Dial Digits .....................................................................121
Table of Contents 7
Table of Contents
Dial Screen ..................................................................122
Service LED .................................................................122
Section 10: Sounds ........................................125
Volume/Vibrate .............................................................126
Ringer Type ..................................................................126
Key Beep .....................................................................127
Alerts ...........................................................................128
Power On/Off ...............................................................129
Roam Ringer ................................................................129
Whisper Mode ..............................................................130
Section 11: Camera .......................................131
Taking Pictures ............................................................132
Saving Pictures ............................................................141
The Picture Gallery .......................................................141
Taking Videos ..............................................................143
The Video Gallery .........................................................144
Camera Settings ..........................................................145
Point, Click, and Send a Picture ....................................152
Section 12: Tools ...........................................153
Voice Kit .......................................................................154
Today ...........................................................................161
Scheduler ....................................................................163
Jump To Date ..............................................................164
To Do List ....................................................................164
Memo Pad ...................................................................166
Count Down .................................................................168
Alarm Clock .................................................................170
World Time ..................................................................172
Calculator ....................................................................173
Section 13: Changing Your Settings .............175
Location Setting ...........................................................176
Network Settings ..........................................................176
Table of Contents
8
Security Settings ..........................................................178
Call Options ..................................................................185
Shortcut Setting ...........................................................188
Language Setting .........................................................189
Clock Set ......................................................................189
Version Information ......................................................190
Section 14: Health and Safety Information ...191
Health and Safety Information .......................................192
Consumer Information on Wireless Phones ...................194
Road Safety ..................................................................204
Operating Environment .................................................206
Using Your Phone Near Other Electronic Devices ..........207
Potentially Explosive Environments ...............................208
Emergency Calls ...........................................................209
FCC Notice and Cautions ..............................................210
Other Important Safety Information ...............................211
Product Performance ....................................................212
Availability of Various Features/Ring Tones ...................213
Battery Standby and Talk Time .....................................214
Battery Precautions ......................................................214
Care and Maintenance ..................................................216
Section 15: Warranty Information .................219
Standard Limited Warranty ...........................................220
Index ...............................................................227
Section 1: Getting Started 9
Section 1
Section 1: Getting Started
Topics Covered
• Activating Your Phone
• Setting Up Voice Mail
• Understanding This User Guide
The SCH-a670 offers a mixture of features such as a
high-resolution display, PIM (Personal Information
Manager) functions, a built-in digital camera with
flash and video capture capabilities, voice
recognition applications, and more. We ask that you
take time to read this guide and become familiar with
your phone’s many features.
This section walks you through starting to use your
phone by activating your service, setting up your
voice mail, contacting customer support, and getting
an understanding of how this manual is put together.
10
Section 1
Activating Your Phone
Contact your wireless carrier and follow their
instructions for obtaining service, if necessary. We
suggest that you read this guide to fully understand the
services your phone supports.
Install the Battery
Note: This phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel charger.
Important! The phone can be used while the battery is charging, but must
be fully charged before first use, otherwise you could damage the battery.
1. Insert the bottom end of the
battery into the phone with the
label side down. Match the gold
contacts on the battery to those
on the phone.
2. Push the top end of the battery
down until it snaps into place.
Remove the Battery
1. Press and hold to turn off the
phone (if on).
2. Pull the battery release latch
toward the top of the phone. The
top of the battery should pop up.
3. Use your finger to lift the battery
(top end first) up and away from
the phone.
Section 1: Getting Started 11
Activating Your Phone
Section 1
Turning Your Phone On
1. Fully extend the antenna for the clearest reception, then
open the folder.
2. Press and hold for two or more seconds. Your phone
powers up, and the phone searches for a network signal.
Note: As with any other radio-transmitting device, do not touch the
antenna as it affects call quality and may also cause the phone to operate
at a higher power level than is necessary.
䢇Once the phone finds a signal, the time, date, and day appear
in the bottom of the display.
䢇You’re now ready to place and receive calls.
If the phone is outside of your carrier’s coverage or
roaming area, the No Service indicator ( ) appears in
top of the display. If you cannot place or receive calls,
try later when service is available.
Turning Your Phone Off
■Press and hold for two or more seconds. Your phone powers
off.
Note: If your phone is on and you press for less than one second, the
phone will not power off. This prevents your phone from being turned off
accidentally.
12
Section 1
Setting Up Your Voice Mail
Before callers can leave voice mail messages, you’ll first
need to set up your account.
1. In standby mode, press and hold until your phone
dials the voice mailbox.
2. Once connected to voice mail, follow the recorded
prompts to personalize your password, greeting, and
mailbox options.
Note: Once you’re Voice Mail account has been set up, you can use the
Voice Mail folder (in the Message menu) to view details of messages in
your voice mailbox. See “Voice Mail” on page 98 for more information.
Understanding This User Guide
The sections of this guide are arranged in similar order
to the menus and sub menus in your phone. A robust
index for quick reference to most features begins on
page 227.
Also included is important safety information that you
should know before using your phone. Most of this
information is near the back of the guide, beginning on
page 191.
Section 1: Getting Started 13
Understanding This User Guide
Section 1
Notes and Tips
Throughout this guide are icons and text that are set
apart from the rest. These are intended to point out
important information, quick methods for activating
features, to define terms, and more. The definitions for
these methods are as follows:
• Notes—Notes explain alternative options within the current
feature, menu, or sub menu.
• Tips—Tips provide quick or innovative methods for performing
functions related to the subject at hand.
• Fast Facts—Fast Facts are like snippets from a glossary. Fast
facts provide definitions in context and proximity to the menu
or feature in question.
• Important—Points out important information about the current
feature that could affect performance, or even damage your
phone.
14
Section 1
Section 2: Understanding Your Phone 15
Section 2
Section 2: Understanding Your Phone
Topics Covered
• Features of Your Phone
• Front View of Your Phone
• Command Keys
• Understanding the Display
• Battery
• Your Phone’s Modes
This section outlines some key features of your
phone. It also displays the screen and the icons that
will are displayed when the phone is in use.
16
Section 2
Features of Your Phone
• High-Resolution Color Display
• Video Capture
• High Speed Data (CDMA 2000 1X Technology)
• Global Positioning Service (GPS) Technology
• Personal Information Manager (Scheduler, To Do List)
• Short Message Service (SMS)
• Picture Messaging
• Voice Recognition Applications
• Built-In Digital Camera With Flash
• 16-Note Polyphonic Ringtones
Section 2: Understanding Your Phone 17
Front View of Your Phone
Section 2
Front View of Your Phone
SCH-a670—Closed View
Antenna
Volume Key
Service
Headset
Connector
Speaker
Camera
Hot Key
Camera Lens
Flash
External
LCD
LED
18
Section 2
SCH-a670—Open View
Earpiece
Display
Right Soft Key
Left
SEND Key END Key
OK Key
easyedgeSM
CLR Key
Messages
Sounds
Alpha-
Voice Signal
(press and hold)
Space/
Silent Mode
Voice Mail
(press and hold)
Microphone
Power/Accessory
Raised Nibs
For Keypad
Orientation
User-
Shortcut
Programmable
(press and hold)
Icons
Soft Key
Connector
Numeric
Keypad
Section 2: Understanding Your Phone 19
Command Keys
Section 2
Command Keys
Left Soft Key
Functions for the left soft key ( ) are defined by what
appears above it in the display. Some functions of the
left soft key are as follows.
• In standby mode, press the Menu (left) soft key ( ) to display
the first of several menus.
• Press the Option (left) soft key ( ) to view options in some
cases.
• Press the left soft key ( ) in response to prompts for browser
charges and other instances.
Right Soft Key
Functions for the right soft key ( ) are defined by what
appears above it in the display. Some, but not all
functions of the right soft key are as follows:
• In standby mode, press the Contacts (right) soft key ( ) to
enter the Contacts list.
• Press the Back (right) soft key ( ) to return to the previous
menu from a sub menu.
• Press the Back (right) soft key ( ) to return to the standby
mode from any main menu.
• In camera mode, press the Gallery (right) soft key ( ) to view
stored pictures.
20
Section 2
Navigation Keys
Use any of the four directional navigation keys to
browse menus, sub menus, and lists. With your phone
in standby mode, each of the four navigation keys also
acts as a shortcut to launch specific applications.
• Up—User programmable to provide a shortcut to one of your
phone’s many functions.
• Down—Accesses the Messages menu.
• Left—Accesses the Sounds menu.
• Right—Accesses the easyedgeSM feature.
• OK—Use the OK ( ) key for such things as replying to or
confirming prompts, and jumping to highlighted links on the
web.
SEND Key
The SEND key ( ) is used to answer calls, dial calls,
and to recall the last number dialed:
• Press once to answer calls.
• Enter a number and press once to connect a call.
• Press once in standby mode to display the most recently
dialed number.
• Press twice in standby mode to call the most recently
dialed number.
Section 2: Understanding Your Phone 21
Command Keys
Section 2
Clear key
The CLR key ( ) is used to erase or clear letters,
numbers, or characters from the display. You can also
press to return to a previous menu or return to
standby mode from any menu.
• Press to backspace and delete.
• To erase all digits or characters from the display screen, press
and hold .
• To back up one menu level, briefly press .
• To return to standby mode from any menu, press and hold
until you return to standby mode.
End Key
• Press and hold to turn on your phone.
• Press and hold to turn off your phone.
• Press once to disconnect a call, to return to standby
mode, or to cancel any input.
Asterisk (*) Key
Press and hold to activate voice command mode.
Say certain voice commands to make calls, record voice
memos, review your Contacts, and review your
calendar and today’s schedule.
One (1) Key
In standby mode, press and hold to call your voice
mail box.
Pound (#) Key
Press and hold to silence or restore the tones your
keypad makes.
22
Section 2
Camera Key
• In standby mode, press and hold the camera key ( ) on the
right side of the phone to activate the camera.
• Press the camera key ( )a second time to snap a picture.
• In standby mode, briefly press the camera key ( ) to display
camera sub menus.
Volume Keys
• In standby mode, press the volume key ( ) on the left side
of the phone up or down to select ring volume and/or ring type.
• During a call, press the volume key ( ) up or down to
adjust earpiece volume.
Understanding the Display
The top line of the display is
reserved for icons that indicate
such things as network status,
battery power, signal strength,
and connection type. Other
icons may appear elsewhere in
the display as well. The
following list includes some of
these icons, along with their
descriptions.
Display Screen Icons
Signal strength—Always appears when your phone is on
and indicates the current receive signal strength. More
lines indicate a stronger signal received from the network.
Service indicator—Indicates a call in progress. When
dialing a number, this icon flashes until the call connects.
Section 2: Understanding Your Phone 23
Understanding the Display
Section 2
No service indicator—Indicates your phone cannot
obtain service because you are outside a service area. You
cannot make or receive calls. Wait for a signal or move into
an open area to try and find a signal. The no service
indicator always appears when you turn on your phone and
disappears once service is located.
Roam—Extended roaming indicator. Roaming occurs
when your phone is outside your home area. While
roaming, a wireless system other than your wireless
provider’s may be handling your call, so the service rate for
the call may be higher than for a call within your home area.
Please refer to information from your wireless provider on
roaming rates.
New Message—Indicates that you have received a new
voice, text, page or web alert message. You are also notified
by visual and audible alerts.
1X Protocol—Indicates your phone is using the 1X data
protocol. The 1X protocol is capable of high-speed data
(3G).
IS95-2G Protocol—Indicates your phone is using the
IS95-2G protocol. This protocol is not capable of high
speed data.
Vibrate mode—Indicates your phone is in vibrate mode
(ringer is silent).
Battery strength—Indicates the battery charge level. The
more black bars, the greater the charge. When the battery
charge becomes very low, a flashing empty battery icon
displays and the phone sounds an audible alert, which
indicates your phone is about to shut down.
Alarm clock—The alarm clock is set.
24
Section 2
GPS (911 only)—Indicates that Global Positioning Service
(GPS) location is on only for 911 calls.
GPS—Indicates GPS location is on continuously.
Silent mode—Indicates your phone is in silent mode. The
ringer is silenced for all alerts, incoming calls, and incoming
messages. The phone alerts you of incoming calls, alerts, or
messages by vibration and a flashing Service LED.
Battery
Charging the Battery
Your phone is powered by a rechargeable standard Li-
Ion battery. Only use Samsung-approved charging
devices and batteries. Samsung accessories are
designed to maximize battery life.
Caution! Using other accessories may invalidate your warranty and may
cause damage.
Using the Travel Charger
The travel charger is a
convenient, light-weight charger
that charges your phone from any
120/220 VAC outlet.
1. Plug the large end of the travel charger into a standard
120 or 220 VAC wall outlet.
2. Remove the small plastic plug from the charger-
accessory connector in the bottom of the phone.
Section 2: Understanding Your Phone 25
Battery
Section 2
3. Insert the smaller end of the
adapter, arrow side up, into the
charger-accessory connector
until it clicks into place.
Tip: You can use your phone while charging, however, the battery charges
faster if the phone is turned off.
Battery indicator
The battery indicator ( ) in the upper-right corner of
the display indicates power level. Monitor the battery
strength and ensure your battery is adequately charged.
• Three bars ( ) indicate a full charge.
• An empty battery icon ( ) indicates a near empty battery.
• The empty battery icon ( ) blinks and a tone sounds two to
three minutes before the battery is too low to operate the
phone.
If you continue to use the phone without charging the battery,
the phone shuts down.
26
Section 2
Power Save mode
Unless the Backlight-Power save setting for the Liquid
Crystal Display (LCD) has been changed, Power save is
set to Off and the backlight changes from bright to dim
after a minute of inactivity, and after another minute of
inactivity, turns off. With Power save set to On, the
backlight is always dim. After approximately one
minute of inactivity, Power save turns the backlight off.
To set Power save, do the following:
1. In standby mode, press the Menu (left) soft key ( ),
then press for Display, (for Backlight), and
for Power save. The following options appear in the
display:
䢇Off
䢇On
2. Use the navigation keys to highlight On or Off, then press
the key.
Your Phone’s Modes
Call Answer Mode
You can select how you wish to answer a call.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Setup), (for Call Options), and
for Call Answer. The following call answer options
appear in the display:
䢇Send Key—Only pressing answers a call.
䢇Folder Open—Opening the phone’s folder or pressing
answers a call.
䢇Any Key—Pressing any key except answers a call.
Section 2: Understanding Your Phone 27
Your Phone’s Modes
Section 2
2. Use the navigation keys to highlight an option.
3. Press the key to select the method for answering
calls.
Input mode
Input mode determines how you enter text, numbers
and symbols. While at any text entry screen, press the
Option (left) soft key ( ), then choose the input mode
from the pop-up menu using the navigation keys.
Optional input modes are T9 Word, ABC, Symbol, 123,
and Canned Msg. (See “Section 5: Entering Text” on
page 63 for more information.)
Tip: You can also cycle between T9 Word, ABC, and 123 by repeatedly
pressing and holding .
Lock Mode
When the phone is in Lock Mode, restrictions are
placed on phone use. You can receive calls and
messages, but cannot place outgoing calls (except for
emergency numbers) until you unlock the phone. Lock
Mode also restricts access to menus and the volume
key. Unlock your phone by entering the lock code
when prompted. (See “Lock Phone” on page 178 for
more information.)
28
Section 2
Standby Mode
Standby mode is the state of the phone once it has
found service and is idle. The phone goes into standby
mode:
• After you power the phone on.
• When you press after a call or from within a menu.
In standby mode, you will see the time, day, and date as
well as all phone status icons.
1. While in standby mode, enter a phone number, and press
to place a call.
2. Press to return to standby mode.
Receive Messages in Standby Mode
You can receive messages in standby mode. An alert
tone sounds and a notification message appears in the
display when a new message arrives.
• Press the View (right) soft key ( ) to view now.
• Press the Ignore (left) soft key ( ) to view later.
Talk Mode
You can place and receive calls only when your phone
is on. While in a call your phone is in talk mode. Press
the Menu (left) soft key ( ) to display a list of menu
options. See “In-Use Menu” on page 39 for more
information.
Section 2: Understanding Your Phone 29
Your Phone’s Modes
Section 2
Enter/Exit Silent Mode
Silence the tones your keypad makes when you press a
key.
• In standby mode, press and hold . Entering Silent Mode
briefly appears in the display and your phone returns to standby
mode.
• While in Silent mode and standby mode, press and hold .
Exit Silent Mode briefly appears in the display and your phone
returns to standby mode.
Vibrate Mode
■In standby mode, repeatedly press the volume key ( ) down
until Vibrate appears in the display.
The volume key is on the upper left side of phone, near the left soft
key ( ).
Adjust the Ringer
1. In standby mode, press the volume key ( ) on the
left side of the phone up or down. Options are:
2. When you are satisfied with the setting, press the
key. Your phone returns to standby mode.
Tip: You can also enter the Volume/Vibrate sub-menu by pressing the
Menu (left) soft key ( ), then pressing the , , and keys. Use
the volume key on the left side of your phone to adjust the ringer setting.
Note: The vibrate icon ( ) appears in the display when the phone is in
Vibrate or Vibrate+Ring mode.
䢇Silent 䢇Level 2
䢇1-Beep 䢇Level 3
䢇Vibrate 䢇Level 4
䢇Vib+Ring 䢇Level 5
䢇Level 1
30
Section 2
Camera Mode
Camera mode lets you activate your phone’s camera to
take pictures and short videos. In Camera mode, you
can also enable or disable the flash and adjust the
resolution and appearance of your pictures and videos.
See “Section 11: Camera” on page 131 for more
information.
• Entering Camera Mode—In standby mode, press and hold the
Camera key ( ) on the upper right side of your phone, near
the right soft key ( ).
• Exiting Camera Mode—Press the End key ( ).
Section 3: Call Functions 31
Section 3
Section 3: Call Functions
Topics Covered
• Making a Call
• Answering a Call
•Calls
•Voice Mail
•Voice Kit
This section provides procedures for making and
answering calls. This section also describes features
associated with making and answering calls.
32
Section 3
Making a Call
1. With the phone on, enter the number you wish to call
using the keypad.
2. Press to place the call.
Three-way Calling
Call two other numbers and connect them to your call
using three-way calling.
1. In standby mode, enter the number for the first party in
your call, then press .
2. When connected, ask the other party to remain on the
line. Press to place them on hold.
3. Enter the second party’s phone number and press .
4. When the second party answers, press to connect
all three parties.
Manual Pause Calling
To manually call a number with pause(s) without
storing it in your Contacts list:
1. In standby mode, enter the number you wish to call.
2. Press the Option (left) soft key ( ). The following pause
options appear in the display:
䢇P pause—A hard pause (waits for input from you).
䢇T pause—A 2-second pause after which dialing resumes.
3. Use the navigation keys to highlight the desired pause.
4. Press the key to enter the highlighted pause into
the number sequence.
5. Press to call the number.
Section 3: Call Functions 33
Making a Call
Section 3
Tip: Store pauses along with the number if you plan to call the number
frequently.
Speed Dialing
Speed Dialing lets you place a call to any Contact stored
in your Contacts list by dialing the Contact’s Location
number.
1-Touch Dialing
Use 1-touch dialing to speed dial Contacts from 001
(Voice Mail) through 009.
■In standby mode, press and hold the number key repre-
senting the desired Contact’s Location number.
Example: To speed dial the Contact assigned Location 005, press and hold
the key.
2-Touch Dialing
Use 2-touch dialing to speed dial Contacts from 010
through 099.
1. In standby mode, press and release the number key
representing the first digit of the desired Contact’s
Location number.
2. Press and hold the number key representing the second
digit of the desired Contact’s Location number.
Example: To speed dial the Contact assigned Location 035, press
then press and hold the key.
34
Section 3
3-Touch Dialing
Use 3-touch dialing to speed dial Contacts from 100
through 500.
1. In standby mode, press and release the number key
representing the first digit of the desired Contact’s
Location number.
2. Press the number key representing the second digit of
the desired Contact’s Location number.
3. Press and hold the number key representing the third
digit of the desired Contact’s Location number.
Example: To speed dial the Contacts entry assigned to Location 325, press
, press , then press and hold the key.
Voice Dialing
Voice Dialing lets you use your voice to dial numbers
and Contacts.
Digit Dial a Number
1. Press and hold to open the Voice menu.
2. When the Voice menu appears, say “Digit Dial”.
3. You’re prompted to say the number. Say the digits
individually and in a normal voice.
4. The digits appear in the display, and you are prompted to
verify the spoken number.
5. Once verified, the number is dialed.
Name Dial an Entry in Contacts
1. Press and hold to open the Voice menu.
2. When the Voice menu appears, say “Name Dial”.
Section 3: Call Functions 35
Answering a Call
Section 3
3. You’re prompted to say the name. Say the name exactly
as it is entered in your Contacts.
4. The entry appears in the display and the number
associated with the name is dialed.
Tip: See “Voice Kit” on page 45 for more information.
Answering a Call
Incoming
When you receive a call, the phone displays one of the
following:
• If the caller can be identified, the caller’s number (or name if it’s
in your Contacts) appears in the display.
• If the caller cannot be identified, Call from unavailable #, Call
from restricted #, or no number appears in the display.
Tip: Assign pictures to Contacts entries. The entry’s assigned picture
appears in the display when you receive a call from that entry. See
“Assigning a Picture to a Contacts Entry” on page 82.
The phone continues to notify you of the call until one
of the following events occur:
• You answer the call.
• The calling party ends the call.
• The call is sent to voicemail.
36
Section 3
Call Notification Features
Your phone notifies you of a call in a variety of ways.
• Nine ring volume settings including 1-beep, Vibrate, Silent, or
Vibrate+Ring.
• Different ring types or melodies to distinguish callers.
• Name display with caller ID. (If the caller’s name is programmed
into your Contacts).
• Information about the last 20 incoming, missed, and outgoing
calls are automatically stored to a call log.
Set Call Ringer Volume
1. In standby mode, press the volume key on the left side of
the phone.
2. Press the volume key up or down to set the call ringer
volume as desired.
Adjust the Ringer
1. In standby mode, press the volume key ( ) on the
left side of the phone up or down. Options are:
2. Press once you’re satisfied with the setting. The
phone returns to standby mode.
Tip: You can also enter the Volume/Vibrate sub menu by pressing the left
soft key ( ) Menu, then pressing (for Sounds), (for Volume/
Vibrate), and (Calls). Use the volume key to adjust the ringer setting.
䢇Silent 䢇Level 2
䢇1-Beep 䢇Level 3
䢇Vibrate 䢇Level 4
䢇Vib+Ring 䢇Level 5
䢇Level 1
Section 3: Call Functions 37
Answering a Call
Section 3
Note: The vibrate icon ( ) appears in the display when the phone is in
Vibrate or Vibrate+Ring mode.
Call Answer
Select from three methods for answering calls. This
option can be changed in the Setup menu.
1. In standby mode, press the left soft key ( ) Menu, then
press (for Setup), (for Call Options), and
for Call Answer. The following options appear in the
display:
䢇Send Key—Only pressing answers a call.
䢇Folder Open—Opening the phone’s folder or pressing
answers a call.
䢇Any Key—Pressing any key except answers a call.
2. Use the navigation keys to highlight the Call Answer
option of your choice.
3. Press to activate the method for answering calls.
Call Waiting
If you’re on a call, your phone beeps when another call
is incoming. Contact your wireless carrier for
availability.
1. Press to connect and ask the calling party to
remain on the line.
2. Press and the second caller is placed on hold and
you’re returned to the original caller.
3. Press to alternate between calls.
38
Section 3
Caller ID
Caller ID lets you identify who is calling you by
displaying a caller’s number. If the caller’s name and
number are stored in Contacts, the caller’s name also
appears. If you’ve assigned a picture to the entry, it
appears in the display as well.
Call Block
You can prevent your number from displaying on
another phone’s caller ID screen by enabling Call
Block.
1. In standby mode, enter , , .
2. Enter the number you wish to call, then press .
Silence an Incoming Ring
During an incoming call, any of the following keys can
be pressed to silence the ringer:
• The up or down volume key on the left side of the phone.
• The END key ( ).
• The camera key ( ) on the right side of the phone.
Ignore an Incoming Call
Ignored calls are immediately forwarded to Voice Mail.
■During an incoming call, press the Ignore (left) soft key
( ). The incoming call is forwarded to Voice Mail.
Section 3: Call Functions 39
Answering a Call
Section 3
In-Use Menu
You can access a number of menus and features even
while in a call.
1. While in a call, press the Menu (left) soft key ( ). The
following options appear in the display:
䢇Calls—View your call logs.
䢇Contacts—Display the Contacts menu.
䢇Voice Memo—Record a voice memo.
䢇Silent/Quit—Silence keypad tones.
䢇Send Tel#—Send your phone number (if you’re the recipient
of the call). Send the recipient’s phone number (if you’re the
originator of the call).
䢇Send DTMF—Send your phone number as tones (if you’re the
recipient of the call). Send the recipient’s phone number as
tones (if you’re the originator of the call).
䢇Voice Privacy—Prevent recipients of your calls from seeing
your number on their display.
䢇Location—Turn your GPS location on or set GPS location for
emergency calls only.
䢇Version—View the software and hardware version
information for your phone.
2. Use the navigation keys to highlight an option.
3. Press to open the menu or activate the feature.
40
Section 3
Calls
Your phone has Call Logs that retain information about
Outgoing, Incoming, and Missed Calls. The Calls menu
lets you access this information for future reference, to
return calls, and to add new Contacts. You can also
view times for your last call and the total of all calls.
Tip: To quickly view a list of your most recent calls (outgoing, incoming,
and missed), briefly press in standby mode. The Recent Calls screen
listing to 20 of your most recent calls appears in the display.
Outgoing
The last 20 outgoing calls are stored in the Outgoing
calls log. Review the Outgoing calls log for the time and
date of a call, as well as other information.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Calls) and for Outgoing. A list
of your outgoing calls appears in the display.
2. Use the navigation keys to highlight a call, then press
to view further information about the call.
3. Press the Option (left) soft key ( ). The following
options appear in the display:
䢇Talk—Call the selected number.
䢇Save—Save the number to your Contacts.
䢇Prepend—Add a prefix to the number.
䢇Erase—Erase the selected call from your Outgoing call list.
4. Use the navigation keys to highlight an option.
5. Press to perform the highlighted option’s function.
Section 3: Call Functions 41
Calls
Section 3
Incoming
The last 20 Incoming calls are stored in your phone’s
Incoming call log. You can review the Incoming call log
for time and date of the call, as well as other
information.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Calls) and for Incoming. A list
of your Incoming calls appears in the display.
2. Use the navigation keys to highlight a call, then press
to view further information about the call.
3. Press the Option (left) soft key ( ) to display a pop-up
menu containing the following options:
䢇Talk—Call the selected number.
䢇Save—Save the number to your Contacts.
䢇Prepend—Add a prefix to the number.
䢇Erase—Erase the selected call from your Incoming call list.
4. Use the navigation keys to highlight an option.
5. Press to perform the highlighted option’s function.
Missed
The last 20 missed calls (calls not picked up) are stored
in the Missed call log. Review the Missed call log for
the time and date of the call, as well as other
information.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Calls) and for Missed. A list of
your missed calls appears in the display.
2. Use the navigation keys to highlight a call, then press
to view further information about the call.
42
Section 3
3. Press the Option (left) soft key ( ) to display a pop-up
menu that contains the following options:
䢇Talk—Call the selected number.
䢇Save—Save the number to your Contacts.
䢇Prepend—Add a prefix to the number.
䢇Erase—Erase the selected call from your Incoming call list.
4. Use the navigation keys to highlight an option.
5. Press to perform the highlighted option’s function.
Erase Logs
You can erase Outgoing, Incoming, Missed, or All Calls.
Erase All Calls
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Calls), (for Erase Logs), and
for All Calls. “Erase All Calls?” appears in the
display as well as the options Yes and No.
2. Use the navigation keys to highlight Yes to erase all calls
from the call logs, then press , or highlight No and
press to exit without erasing call logs.
Call Timer
View the duration of your last call, total calls, and calls
made during the life of your phone using the Call timer
feature. Call timer is not for billing purposes.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Calls) and for Call Timer. The
following options appear in the display:
䢇Last Call—View the duration of your last call.
䢇Total—View the duration of total, incoming and outgoing calls
made on your phone since the last erasure.
Section 3: Call Functions 43
Calls
Section 3
䢇LifeTime—View the duration of all calls on your phone since
activation (LifeTime timers cannot be erased).
䢇Erase Total—Erases the counters for the Total call timer.
2. Press the number of the option you wish enter, or use the
navigation keys to highlight the option and press .
3. Press to exit the Option menu.
Note: Although Total call timers can be erased, LifeTime call timers can
never be erased.
Data Counter
Use Data Counter to view the amount of data that has
been sent or received (or a total of both) using the data
services that your phone supports. The Data Counter
can be a helpful tool for monitoring data usage,
especially if your service agreement has specified
limits.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Calls) and for Data Counter. The
following options appear in the display:
䢇Transmit—View the amount of data (in kilobytes) that your
phone has transmitted since last being reset.
䢇Received—View the amount of data (in kilobytes) that your
phone has received since last being reset.
䢇Total—View the amount of data (in kilobytes) that your phone
has transmitted and received since last being reset.
䢇Erase Total—Erase (reset) the Transmit, Received, and Total
data counters.
44
Section 3
Store Numbers from Call Logs
Store numbers from your Outgoing, Incoming, and
Missed call logs to Contacts.
Tip: In standby mode, briefly press to display the Recent Calls list. You
can then select any call in the list to save to Contacts.
1. In standby mode, press the Menu (left) soft key ( ),
then press for Calls.
2. Press the corresponding number on the keypad to view
call logs for the following call types.
䢇 for Outgoing
䢇 for Incoming
䢇 for Missed
3. Use the navigation keys to highlight the number you wish
to store in Contacts and press .
4. Press the Option (left) soft key ( ), then use the
navigation keys to highlight Save.
5. Choose to add the number as a New Entry, or Find a
number in your Contacts with which to associate the
number.
6. Follow the prompts to store the number to the Contacts.
Voice Mail
Voice mail allows callers to leave voice messages with
your network. These messages can be retrieved any
time you are in a network coverage area.
Section 3: Call Functions 45
Voice Kit
Section 3
Voice Mail Setup
Before callers can leave voice mail messages, you’ll first
need to set up your account.
1. In standby mode, press and hold until your phone
dials the voice mailbox.
2. Once connected to voice mail, follow the recorded
prompts to personalize your password, greeting, and
mailbox options.
Note: Once you’re Voice Mail account has been set up, you can use the
Voice Mail folder (in the Message menu) to view details of messages in
your voice mailbox.
Check Your Voice Mail
1. In standby mode, press and hold until you’re
connected to the voice mail system. A recorded message
prompts you for a password.
2. Enter your password, then press .
3. Follow the recorded prompts to listen to your voice
messages, change administrative options, and so on.
Voice Kit
Voice recognition capabilities of the SCH-a670 are
exceptional due to advanced, speaker-independent
technology. This means there is no longer a need to
“train” your phone to understand your voice. You can
finally use your voice in a natural manner to dial
numbers, lookup contacts, view your schedule, and
much more. Please read the following content carefully
to learn the most about this useful feature.
46
Section 3
Voice Commands
The Voice menu contains the following commands,
which you can activate by pressing and holding ,
then speaking the command. Each of the following
commands is explained in greater detail in the sections
that follow.
• Digit Dial—Dial any seven or ten-digit North American phone
number.
• Name Dial—Dial a name, if stored in your Contacts.
• Quick Dial—Display and dial voice-tagged entries in your
Contacts.
• Voice Memo—Record a voice memo.
• Contacts—Display your Contacts entries, if any exist.
• Today—Display your calendar and view today’s schedule.
Digit Dial
Digit Dial lets you dial any valid seven-digit or ten-
digit phone number by speaking the number naturally,
without pausing between digits.
Digit Dial Tips
• Digit Dial works best in quieter environments.
• When pronouncing a number, speak at a normal speed, saying
each digit clearly. There is no need to pause between digits.
• The phone recognizes the digits one, two, three, four, five, six,
seven, eight, nine, zero, and oh (zero). It doesn’t recognize
numbers such as “one eight hundred” for “1-800.” Instead,
say “one eight zero zero,” or “one eight oh oh.”
• The phone recognizes only valid seven or ten-digit North
American phone numbers, optionally preceded by the digit “1.”
Section 3: Call Functions 47
Voice Kit
Section 3
• If you are experiencing frequent problems getting Digit Dial to
recognize you, try adapting it to your voice, which can greatly
improve accuracy. See “Digit Dial Adaptation” on page 159 for
more information.
Use Digit Dial
1. In standby mode, press and hold .
“Say a Command” appears in the display, and “Please
say a command.” is pronounced through the speaker.
2. Say “Digit Dial”. You’re prompted to say the number.
3. Pronounce the number naturally and clearly.
The phone may display one or more numbers on the
screen and prompt you for confirmation.
4. If the phone asks “Did you say” followed by the correct
number, say “Yes”. The phone dials the number.
5. If the phone asks “Did you say” followed by any
incorrect numbers, say “No”.
If there are other choices, the phone prompts you with
them as necessary.
Tip: Choose a number from the list manually. Use the navigation keys to
highlight the number, then press to select.
48
Section 3
Name Dial
Name Dial lets you dial any person in your Contacts by
pronouncing that person’s name. It automatically voice
activates every contact in your Contacts without the
need to record or “train” names before using them.
Place a Call Using Name Dial
1. In standby mode, press and hold .
“Say a Command” appears in the display, and “Please
say a command.” is pronounced through the speaker.
2. Say “Name Dial”. The phone prompts, “Please say the
name.”
3. Say the full name of the person you wish to call, exactly
as it is entered in your Contacts.
4. The phone may display one or more names on the
screen and prompt you to confirm the name you spoke. If
this happens, respond to the prompts with “Yes” or “No”
as appropriate.
Tip: You can also choose a name from the choice list manually. Use the
navigation keys to highlight the name and then press .
䢇If the name that you pronounced has more than one associated
number, the phone displays the different locations (such as
“home” or “work”) and prompts you, “Which number?” In
this case, pronounce the location that you wish to call. The
phone dials the number.
Section 3: Call Functions 49
Voice Kit
Section 3
Quick Dial
Quick Dial lets you dial a person by saying the name
you’ve recorded for that person. Before you can use
Quick Dial, you’ll need to record the names you wish to
use. See “Record a Name or Phrase for Quick Dial” on
page 154 for more information.
Use Quick Dial
1. In standby mode, press and hold .
“Say a Command” appears in the display, and “Please
say a command.” is pronounced through the speaker.
2. Say “Quick Dial”.
The phone prompts, “Who would you like to call?”
3. Say one of the names you’ve recorded. If the name
matches, your phone dials the number.
䢇If a match doesn’t occur, the phone asks you to confirm the
name and other prompts follow.
䢇If no matches occur after following the prompts, the phone
responds, “Sorry, no match found.”
Contacts
Contacts lets you retrieve contact information for any
person in your Contacts by pronouncing the name of
that person.
1. In standby mode, press and hold .
“Say a Command” appears in the display, and “Please
say a command.” is pronounced through the speaker.
2. Say “Contacts.” The phone prompts you to say the
name.
50
Section 3
3. Pronounce the name of the person exactly as it is
entered in your Contacts.
You may be asked to confirm the name before the phone
looks up the contact information for that name.
䢇In this case, the phone prompts, “Did you say”, followed by
the next name it recognizes.
䢇Respond with a “Yes” or “No” as appropriate.
䢇If there is no match found, the phone responds, “Sorry, no
match found.”
Voice Memos
You can use your phone to record voice memos for later
playback. You can also record the caller on the other
end of the line during a phone conversation.
Note: There is limited space for the number and length of recordings.
• The maximum number of voice memos is 10.
• The maximum length for a single voice memo is 60 seconds.
Record a Voice Memo
1. In standby mode, press and hold until your phone
prompts, “Please say a command.” Say “Voice
Memo” into the microphone to launch Voice Memo.
2. Wait for the beep, then start speaking. As it is recording
the phone displays a countdown timer that shows the
seconds remaining for the recording.
䢇To pause the memo, press the Pause (left) soft key ( ). When
a memo is paused, select Resume to resume recording.
Section 3: Call Functions 51
Voice Kit
Section 3
3. Press the Stop (right) soft key ( ) once you’re finished
recording. The following options appear in the display:
䢇Review—Replay the voice memo that you just recorded.
䢇Rerecord—Record over the voice memo that you just
recorded.
䢇Save—Save the voice memo that you just recorded.
䢇Quit—Exit to the previous (Voice Memo) menu.
4. Use the navigation keys to highlight Save, then press
.
5. Enter a title for the voice memo using the keypad.
6. Press to save the voice memo.
52
Section 3
Section 4
Section 4: Menu Navigation 53
Section 4: Menu Navigation
Topics Covered
• Menu Navigation
• Menu Shortcuts
• Navigation Key Shortcuts
• Navigate Using a Shortcut
• Menu Outline
This section explains the menu navigation for your
phone. It also includes an outline of all the available
menus associated with your phone.
Section 4
54
Menu Navigation
Access the menus and sub menus in your phone using
the navigation key ( ) and soft keys ( ), or use
a shortcut.
1. In standby mode press the Menu (left) soft key ( ). The
first of several menus appear in the display.
Note: More than one menu may appear in your display. This setting can be
modified in the Setup/Display/Menu Style menu.
2. Use the navigation key to browse through the menus.
3. Press to enter the menu or sub menu that appears
in the display.
4. Press the right soft key ( ) Back to return to the
previous menu.
Return to the Previous Menu
• Press the right soft key ( ) Back to return to a previous menu.
• When Back does not appear in the display, press to
return to the previous menu.
Menu Shortcuts
Use shortcuts to quickly access menus and sub menus.
Press the left soft key ( ) Menu, then press the number
to the right of the menu to jump to the desired menu,
sub menu, or feature. For example, to jump to the
Outbox sub menu, press the Menu (left) soft key ( ),
then press (for Messages) and for Outbox.
Section 4: Menu Navigation 55
Navigation Key Shortcuts
Section 4
Navigation Key Shortcuts
In standby mode, press a navigation key to launch the
key’s corresponding application.
Navigate Using a Shortcut
You can also access menus and sub menus using menu
numbers. Enter the menu number after pressing the
Menu (left) soft key ( ) to go directly to the menu or
sub menu of your choice. Before you can navigate using
a shortcut, you’ll need the menu or sub menu number
that you wish to access.
Tip: Use the list of menus and sub menus, which begins on page 56, to
navigate using shortcuts.
1. In standby mode, press the Menu (left) soft key ( ).
2. Press the number of the menu, sub menu, and so on for
the feature that you wish to access.
Example: Press the left soft key ( ) for Menu, then press , . This
takes you to the Tools (Menu 8), and then to the To Do List (sub menu 5).
Section 4
56
Menu Outline
1 Contacts
1.1 Find
1.2 Add
1.2.1 Number
1.2.2 E-Mail
1.3 Rename Group
1.3.1 Friend
1.3.2 Family
1.3.3 Colleague
1.3.4 VIP
1.3.5 No Name
1.4 My Phone#
1.5 Memory
2Calls
2.1 Outgoing
2.2 Incoming
2.3 Missed
2.4 Erase Logs
2.4.1 Outgoing
2.4.2 Incoming
2.4.3 Missed
2.4.4 All Calls
2.5 Call Timer
2.5.1 Last Call
Section 4: Menu Navigation 57
Menu Outline
Section 4
2.5.2 Total
2.5.3 LifeTime
2.5.4 Erase Total
2.6 Data Counter
2.6.1 Transmit
2.6.2 Received
2.6.3 Total
2.6.4 Erase Total
3 Messages
3.1 New Text Msg
3.2 New Pic. Msg
3.3 Voice Mail
3.4 Inbox
3.5 Outbox
3.6 Draft Box
3.7 Saved Box
3.8 Msg Setting
3.8.1 Text
3.8.1.1 Save in Outbox
3.8.1.2 Insert Sign.
3.8.1.3 Delivery Ack
3.8.1.4 Direct View
3.8.1.5 Signature
3.8.1.6 Callback#
3.8.1.7 Block Address
3.8.2 Pic. Msg
3.8.2.1 Save In Outbox
3.8.2.2 Delivery Ack
Section 4
58
3.8.2.3 Retrieval Mode
3.8.3 General
3.8.3.1 Entry Mode
3.8.3.2 Canned Msg.
3.8.3.3 Msg. Alert
3.8.3.4 Auto Delete
3.8.3.5 Voice Mail #
3.9 Erase Msg
3.9.1 Voice
3.9.2 Inbox
3.9.3 Outbox
3.9.4 Draft
3.9.5 Saved
3.9.6 All Messages
4 easyedgeSM
4.1 easyedge
5Display
5.1 Menu Style
5.2 Animation
5.2.1 Opening
5.2.2 Closing
5.2.3 Wallpaper
5.3 Front Display
5.3.1 Wallpaper
5.3.2 Contrast
5.4 Banner
Section 4: Menu Navigation 59
Menu Outline
Section 4
5.5 Backlight
5.5.1 LCD
5.5.2 Keypad
5.5.3 Power save
5.6 Auto Hyphen
5.7 Dial Digits
5.8 Dial Screen
5.9 Service LED
6 Sounds
6.1 Volume/Vibrate
6.1.1 Calls
6.1.2 Alarm
6.2 Ringer Type
6.2.1 Calls
6.2.2 Alarm
6.2.3 Data
6.2.4 Planner
6.3 Key Beep
6.3.1 Volume
6.3.2 Tone Length
6.4 Alerts
6.4.1 Minute Beep
6.4.2 Service
6.4.3 Connect
6.4.4 Disconnect
6.4.5 Fade
6.4.6 Roam
Section 4
60
6.4.7 Privacy
6.5 Power On/Off
6.6 Roam Ringer
6.7 Whisper Mode
7 Camera
7.1 Take a Picture
7.2 Take a Video
7.3 Picture Gallery
7.4 Video Gallery
7.5 Settings
7.5.1 Flash
7.5.2 Resolution
7.5.3 Fun Frames
7.5.4 Color Tones
7.5.5 Shutter Sound
7.5.6 Quality
8 Tools
8.1 Voice Kit
8.1.1 Quick Dial
8.1.1.1 Record
8.1.1.2 Review
8.1.1.3 Erase All
8.1.2 Voice Memo
8.1.2.1 Record
8.1.2.2 Review
8.1.2.3 Erase All
8.1.3 Voice Setup
Section 4: Menu Navigation 61
Menu Outline
Section 4
8.1.3.1 Set Active
8.1.3.2 Set Digits
8.2 Today
8.3 Scheduler
8.4 Jump To Date
8.5 To Do List
8.6 Memo Pad
8.7 Count Down
8.8 Alarm Clock
8.9 World Time
8.0 Calculator
9Setup
9.1 Location
9.2 Network
9.2.1 Set NAM
9.2.2 Roam Option
9.3 Security
9.3.1 Lock Phone
9.3.2 Change Lock
9.3.3 Emergency #
9.3.3.1 911
9.3.3.2 #911
9.3.3.3 *911
9.3.4 Voice Privacy
9.3.5 Restriction
9.3.5.1 Outgoing
9.3.5.2 Incoming
9.3.5.3 Contacts
Section 4
62
9.3.6 Erase Memory
9.3.7 Reset Phone
9.4 Call Options
9.4.1 Auto Retry
9.4.2 Data
9.4.2.1 Auto Detect
9.4.2.2 Baud Rate
9.4.3 Call Answer
9.4.4 Auto Answer
9.4.5 TTY Mode
9.5 Shortcut
9.6 Language
9.7 Clock Set
9.8 Version
Section 5: Entering Text 63
Section 5
Section 5: Entering Text
Topics Covered
• Changing the Text Entry Mode
• Using T9 Mode
• Entering Upper and Lower Case
• Entering Symbols
• Entering Numbers
This section outlines how to select the desired text input
mode when entering characters into your phone. This
section also describes how to use the T9 predictive text
entry system to reduce the number of key strokes you
must make when entering text.
64
Section 5
Changing the Text Entry Mode
Text messages can be made up of alphabetical characters,
numbers, and symbols. You can use the following text
entry modes to simplify text entry:
• ABC—Enter letters, numbers, and symbols by repeatedly
pressing each key until the desired character (as shown on the
key) appears in the display. ABC mode letter options are:
• ABC—Enter all upper case letters
• Abc—Enter initial capital letters
• abc—Enter all lower case letters
• Symbol—Enter symbols into your message by pressing the
number above the symbol in the display.
• 123—Enter numbers by pressing the corresponding key on the
keypad.
• T9 Word—Press each key only once to enter the letter of the
word that you’re spelling.
The current text entry mode (ABC, SYM, 123, or T9 Word)
is indicated in the lower part of a text entry screen. To
change the text entry mode, do the following:
■While composing a text message, press the Option (left) soft key
( ). The following options appear in the display:
䢇T9 Word
䢇ABC
䢇Symbol
䢇123
䢇Canned
Note: The Canned option is initially hidden in the pop-up menu. Use the
navigation keys to scroll down and select this option.
Section 5: Entering Text 65
Using T9® Mode
Section 5
Using T9® Mode
T9 Word recognizes commonly used words for the
numeric sequence of key presses and inserts the word into
y o ur mess age . T9 Wo r d i s m uch f a st er t han th e tr adi tio na l
method of text entry (ABC) and requires only one key press
per letter of the word that you’re spelling.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Messages) and for New Text
Msg.
2. Enter the phone number of the recipient, then press
.
3. Press the Option (left) soft key ( ). The following
options appear in the display:
䢇T9 Word
䢇ABC
䢇Symbol
䢇123
䢇Canned
Note: The Canned option is initially hidden in the pop-up menu. Use the
navigation keys to scroll down and select this option.
4. T9 Word is highlighted. Press .
䢇For practice, enter the word “Samsung” by pressing each of
the following keys only once:
SAMSUNG
66
Section 5
T9 Word recognizes that the most commonly used word for the
numeric sequence you just entered is “Samsung.” If more than
one word shares the same numeric sequence, T9 Word
provides the most commonly used word. Press to display
other words, if available.
Entering Upper and Lower Case
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Messages) and for New Text
Msg.
2. Enter the phone number of the recipient, then press
.
3. Press the Option (left) soft key ( ). The following
options appear in the display:
䢇T9 Word
䢇ABC
䢇Symbol
䢇123
䢇Canned
Note: The Canned option is initially hidden in the pop-up menu. Use the
navigation keys to scroll down and select this option.
4. T9 Word is highlighted. Use the navigation keys to
highlight ABC, then press .
䢇Enter characters while in ABC mode by pressing the key
labeled with the desired characters (such as for “h”).
䢇Press the key repeatedly until the desired character appears in
the display.
Section 5: Entering Text 67
Entering Symbols
Section 5
䢇Pause briefly and the displayed character is accepted and
inserted into your message.
䢇Press to enter a space.
Entering Symbols
Symbol mode enables you to enter symbols such as “@” or
“%” into a text message.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Messages) and for New Text
Msg.
2. Enter the phone number of the recipient, then press
.
3. Press the Option (left) soft key ( ). The following
options appear in the display:
䢇T9 Word
䢇ABC
䢇Symbol
䢇123
䢇Canned
Note: The Canned option is initially hidden in the pop-up menu. Use the
navigation keys to scroll down and select this option.
4. T9 Word is highlighted. Use the navigation keys to
highlight Symbol, then press . The first of four
symbol screens appear in the display.
5. Use the navigation keys to page through the other
symbols, if desired.
68
Section 5
6. Press the key that corresponds with the symbol that you
wish to enter. For example, press for an
exclamation point (!).
7. Repeat steps 3 through 6 to insert as many symbols into
your message as desired.
Entering Numbers
Enter numbers into a text message while in 123 mode.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Messages) and for New Text
Msg.
2. Enter the phone number of the recipient, then press
.
3. Press the Option (left) soft key ( ). The following
options appear in the display:
䢇T9 Word
䢇ABC
䢇Symbol
䢇123
䢇Canned
Note: The Canned option is initially hidden in the pop-up menu. Use the
navigation keys to scroll down and select this option.
4. Press the key containing the corresponding number that
you wish to insert into your message.
Section 6: Understanding Your Contacts 69
Section 6
Section 6: Understanding Your Contacts
Topics Covered
• Contacts
• Adding a New Contacts Entry
• Finding a Contacts Entry
• Renaming a Contacts Group
• Editing an Existing Contacts Entry
• Saving a Number After a Call
• Deleting a Contacts Entry
• Finding My Phone Number
•Memory
This section details how you can manage your daily
contacts by storing their names and numbers in your
Contacts list. You can have your Contacts entries sorted
by name, entry, or group.
70
Section 6
Contacts
Up to 500 entries can be stored in Contacts. Each entry
can have up to five associated phone numbers and two
e-mail addresses. Each phone number can be up to 32
digits in length, including hard pauses, and associated
names can be up to 22 characters in length. You can
specify the memory location of your choice for each
entry. You can also mark your Contacts list as Restricted
to prevent unauthorized viewing. (See “Restriction” on
page 182 for more information).
Note: You cannot store numbers to locations 311, 411, 611, or 911 in your
Contacts. These locations are reserved for emergency numbers only.
Tip: One-Touch Dialing, Two-Touch Dialing, and Three-Touch Dialing
allow you to call numbers stored in Contacts faster.
Open Contacts
1. In standby mode, press the Menu (left) soft key ( ),
press for Contacts. The following options appear in
the display:
䢇Find—Find a phone number By Name, By Entry, or By Group.
䢇Add—Add a number or e-mail to your Contacts.
䢇Rename Group—Rename one of your five groups.
䢇My Phone#—View the 10-digit number assigned to your
phone by your wireless carrier.
䢇Memory—Display available memory for dial and voice dial
entries.
2. Use the navigation keys to highlight the option of your
choice, and press the key.
Section 6: Understanding Your Contacts 71
Adding a New Contacts Entry
Section 6
Tip: You can also press the keypad number key that corresponds to the
menu option number.
Adding a New Contacts Entry
You can use either of two methods to add an entirely
new entry to Contacts.
Dial Method
1. Using the keypad, enter the number you wish to add to
your Contacts.
2. Press the Save (right) soft key ( ). The following
options appear in the display:
䢇New Entry—Lets you create a new Contacts entry.
䢇Find—Lets you add the number you entered to an existing
Contacts entry.
3. Use the navigation keys to select New Entry and press
the key. The Select Type screen appears in the
display showing the following icons:
4. Use the navigation keys to highlight the type that
matches your new entry, then press the key.
5. Use the keypad to enter a name to associate with the
Contacts entry.
6. Press the key to save the entry.
Home Office Mobile
Pager Fax
72
Section 6
Menu Method
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Contacts) and for Add. The
following options appear in the display:
䢇Number
䢇E-mail
2. Use the navigation keys to highlight the desired option,
then press the key.
3. Enter information for the selected option, then press the
key. The following Confirm options appear in the
display:
䢇New Entry
䢇Find
4. With New Entry highlighted, press the key. The
following (number type) icons appear in the display:
5. Use the navigation keys to highlight the type that
matches your new entry, then press the key.
6. Use the keypad to enter a name to associate with the
Contacts entry.
7. Press the key to save the entry.
Home Office Mobile
Pager Fax
Section 6: Understanding Your Contacts 73
Finding a Contacts Entry
Section 6
Finding a Contacts Entry
If you’ve stored a name entry in Contacts, Find allows
you to find it quickly.
1. In standby mode, press the Contacts (right) soft key
(). The Find screen appears in the display with By
Name showing.
2. Use the Left and Right navigation keys to select the
method you want to use to find an entry. The following
find methods appear in the display:
䢇By Name—Search Contacts alphabetically by name.
䢇By Entry—Search Contacts by entry number.
䢇By Group—Search Contacts by selecting one of the five
available groups.
Find by Name
1. In standby mode, press the Contacts (right) soft key
(). The Find screen appears in the display with By
Name showing.
2. Enter a name as entered in Contacts. For example, if you
saved the name as Amy Smith, begin the search by
pressing (for “A”).
As you enter letters, the entry number and names of the
closest matches appear in the display.
3. When the desired entry appears in the display, use the
navigation keys to highlight the entry (if necessary).
4. Press to dial the number associated with the name.
5. Press the key to view information about the entry.
74
Section 6
6. Press the Option (left) soft key ( ). The following
options appear in the display:
䢇Edit—Edit details of the highlighted name.
䢇Erase—Erase the name and associated information.
䢇Add New—Add a new entry to Contacts.
7. Use the navigation keys to highlight an option, then press
the key. The highlighted option’s sub menu appears
in the display.
Find by Entry
This option allows you to find a stored entry by its
location number.
1. In standby mode, press the Contacts (right) soft key
(). The Find screen appears in the display with By
Name showing.
2. Use the Left and Right navigation keys to show By
Entry.
3. Enter the number that corresponds to the entry, or use
the navigation keys to highlight the desired entry.
4. Once the entry is highlighted, press the Option (left) soft
key ( ). The following options appear in the display:
䢇Edit—Edit details of the highlighted name.
䢇Erase—Erase the Name and associated information.
䢇Add New—Add a new entry to your Contacts.
5. Use the navigation keys to highlight an option, then press
the key. The highlighted option’s sub menu appears
in the display.
Section 6: Understanding Your Contacts 75
Renaming a Contacts Group
Section 6
Find by Group
This option allows you to find a stored entry in a
related group.
1. In standby mode, press the Contacts (right) soft key
(). The Find screen appears in the display with By
Name showing.
2. Use the Left and Right navigation keys to show By
Group.
3. Press the Down navigation key briefly to highlight the
group name field.
4. Use the Left and Right navigation keys to show the
name of the group that you wish to search. As each
group name appears in the display, entries assigned to
that group also appear in the display beneath the group
name.
5. Use the navigation keys to highlight the desired entry.
6. Press the key to display information about the
entry.
Renaming a Contacts Group
Use this option to rename a group in Contacts.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Contacts) and for Rename
Group.
2. Use the navigation keys to highlight the group name that
you wish to change, then press the key. The current
name of the group appears in the display with a flashing
cursor at the end of the name.
76
Section 6
3. Enter changes to the group name using the keypad. See
“Section 5: Entering Text” on page 63 for more
information.
4. When you have completed your changes to the group
name, press the key.
Editing an Existing Contacts Entry
Edit Contacts Numbers
1. Find the Contacts entry you wish to change. See “Finding
a Contacts Entry” on page 73 for more information.
2. Use the navigation keys to highlight the entry and press
the key.
3. Use the navigation keys to highlight the number within
the entry that you wish to change, then press the Option
(left) soft key ( ). The following pop-up menu options
appear in the display:
䢇Talk—Dials the highlighted number.
䢇Edit—Lets you change the highlighted number.
䢇Erase—Deletes the highlighted number.
Important! If a Contacts entry has only one number, selecting the Erase
option can delete the Contacts entry itself.
4. Use the navigation keys to highlight Edit, then press the
key.
䢇Press to backspace and delete numbers.
䢇Press and hold to clear all numbers in the highlighted
field.
Section 6: Understanding Your Contacts 77
Editing an Existing Contacts Entry
Section 6
5. When you’re finished changing the number, press the
key. Your changes are saved and a confirmation
message appears in the display.
Add Pauses to Contacts Numbers
Calls to automated systems such as banking services
often require a password or account number. Instead of
manually entering these numbers, you can store them
in a Contacts entry with the phone number and with
special characters called pauses, up to a maximum of 32
digits.
• P pause—Stops the calling sequence until the phone receives
further input.
• T pause—Stops the calling sequence for two seconds, then
sends the remaining digits.
Note: You can enter multiple two-second pauses to extend the length of a
pause. For example, two consecutive two-second pauses cause a total
pause time of four seconds. Keep in mind pauses count as digits towards
the 32-digit maximum.
To add pauses to a Contacts entry number, do the
following:
1. Find the Contacts entry associated with the number you
want to include one or more pauses. See “Finding a
Contacts Entry” on page 73 for more information.
2. Select and edit the desired number. See “Editing an
Existing Contacts Entry” on page 76 for more
information.
78
Section 6
3. Press the Option (left) soft key ( ). The following pause
options appear in the display:
䢇P pause—A hard pause (waits for input from you).
䢇T pause—A 2-second pause after which dialing resumes.
4. Use the navigation keys to highlight the pause option of
your choice.
5. Press the key to enter the highlighted pause into
the number sequence.
6. When you’re finished entering information, press the
Save (right) soft key ( ) to store the number to
Contacts.
Pause Dial from Contacts
1. If you stored the number using (two-second) T pause(s),
simply recall the number from Contacts.
2. If you stored the number using (hard) P pause(s), recall
the number from Contacts and wait for the appropriate
prompt from the dialed number.
3. Press to dial the number.
Edit an Existing E-mail Address
1. Find the Contacts entry you want to edit. See “Finding a
Contacts Entry” on page 73 for more information.
2. Use the navigation keys to highlight the desired Contacts
entry.
3. Press the Option (left) soft key ( ). A pop-up menu
appears in the display with Edit highlighted.
4. Press the key. The selected Contacts entry
information appears in the display.
5. Use the navigation keys to highlight the E-Mail field.
Section 6: Understanding Your Contacts 79
Editing an Existing Contacts Entry
Section 6
6. Use the keypad to edit the e-mail address. See “Section
5: Entering Text” on page 63 for more information.
7. Press the key to save your changes.
Adding an @ Symbol
To insert the @ symbol in an e-mail address, do the
following:
1. If needed, use the navigation keys to move the cursor to
the appropriate place in the e-mail address.
2. Press the Option (left) soft key ( ).
3. Use the navigation keys to select the Symbol option,
then press the key.
4. Press to enter the @ symbol.
5. Press the key to save your changes.
Adding a Domain Type (.com, .edu, or .net)
1. If needed, use the navigation keys to move the cursor to
the appropriate place in the e-mail address.
2. Press the Option (left) soft key ( ).
3. Use the navigation keys to highlight .com, then use the
navigation keys to show the desired domain type (.com,
.edu, .net), then press the key.
4. Press the key to save your changes.
80
Section 6
Assign a Speed Dial Location to a Contacts Entry
A Contacts entry’s Location number corresponds to the
number keys you press to speed dial that entry. For
example:
• To speed dial the Contacts entry assigned to Location 005,
press and hold the key, (1-touch dialing).
• To speed dial the Contacts entry assigned to Location 035,
press then press and hold the key, (2-touch dialing).
• To speed dial the Contacts entry assigned to Location 325,
press , press , then press and hold the key (3-
touch dialing).
Location numbers can be assigned automatically or
manually during new entry creation or can be changed
by editing an existing entry.
Automatic Location Assignment
To let your phone automatically assign a Location
number to a new Contacts entry, do the following:
■Create the new Contacts entry by following either of the
procedures provided in “Adding a New Contacts Entry”
on page 71.
Manual Location Assignment
To manually assign a Location number to a new
Contacts entry, do the following:
1. Follow either of the New Contacts entry procedures (see
“Adding a New Contacts Entry” on page 71) until you
enter a name for the entry.
2. After entering the Contacts entry name, do not press the
key. Instead, use the navigation keys to highlight
the Location field.
Section 6: Understanding Your Contacts 81
Editing an Existing Contacts Entry
Section 6
3. Enter the new location using the keypad.
Tip: You can also use the Left and Right navigation keys to browse empty
speed dial locations.
Important! Do not enter Location values 001, 311, 411, 511, or 911.
These numbers are already assigned to Voicemail (001), special network
features (311, 411, 511), and to emergency use (911).
4. Press the key to save your changes.
Changing a Speed Dial Location
1. Find the Contacts entry you want to edit. See “Finding a
Contacts Entry” on page 73 for more information.
2. Use the navigation keys to highlight the desired entry.
3. Press the key.
4. Use the navigation keys to highlight the Location field.
5. Press the Edit (left) soft key ( ).
6. Enter the new location using the keypad.
Tip: You can also use the Left and Right navigation keys to browse empty
speed dial locations.
Important! Do not enter Location values 001, 311, 411, 511, or 911.
These numbers are already assigned to Voicemail (001), special network
features (311, 411, 511), and to emergency use (911).
7. Press the key to save your changes.
82
Section 6
Assign Speed Dial Types
If you have more than one number (or type, such as
Mobile or Office) for an entry, you can select which of
those numbers are dialed when the associated speed
dial key is pressed by doing the following:
1. Find the Contacts entry you want to edit. See “Finding a
Contacts Entry” on page 73 for more information.
2. Use the navigation keys to highlight the desired entry.
3. Press the key.
4. Use the navigation keys to highlight the SpeedDial field,
then press the Edit (left) soft key ( ).
5. Use the Left and Right navigation keys to select the
desired number (type) for speed dialing.
6. Press the key. Your changes are saved.
Assigning a Picture to a Contacts Entry
When you assign a picture to a Contacts entry, the
picture that you assigned to the entry appears in the
display when you receive a call from the entry.
1. Find the Contacts entry you want to edit. See “Finding a
Contacts Entry” on page 73 for more information.
2. Use the navigation keys to highlight the desired Contact.
3. Press the key.
4. Use the navigation keys to highlight the Picture ID field,
then press the Edit (left) soft key ( ).
5. Press the Option (left) soft key ( ). A pop-up menu
appears in the display with the Gallery option
highlighted.
Section 6: Understanding Your Contacts 83
Saving a Number After a Call
Section 6
6. Press the key. The Gallery opens, showing a series
of thumbnail images.
7. Use the navigation keys to highlight the picture that you
wish to assign to the Contacts entry.
8. Press the key. The Contacts entry screen appears
in the display with the selected image’s file name in the
Picture ID field.
9. Press the key to save the picture assignment to the
selected Contacts entry.
Saving a Number After a Call
Once you finish a call, you can store the caller’s number
to your Contacts list.
Note: If the call was incoming and Caller ID information was unavailable,
then the Save option is also unavailable.
1. Press
to end your call. The call time, length of call,
phone number, and name of the party (if available)
appear in the display.
2. Press the Save (right) soft key ( ). The following
options appear in the display:
䢇New Entry—Lets you create a new Contacts entry.
䢇Find—Lets you add the number you entered to an existing
Contacts entry.
3. Follow the instructions in the upcoming sections
depending on whether the number is a new entry or you
wish to add it to an existing entry.
84
Section 6
Add a New Entry
1. Use the navigation keys to highlight New Entry and
press the key. The Select Type screen appears in
the display showing the following icons:
2. Use the navigation keys to highlight the number type that
matches your new entry, then press the key.
3. Enter a name for the new entry and press the key.
The new entry is saved to your Contacts list.
Add to an Existing Entry
1. Use the navigation keys to highlight Find, then press the
key.
2. Use the navigation keys to select the search method that
you wish to use (By Name, By Group, or By Entry).
3. Enter information to find the entry, or use the navigation
keys to highlight the desired entry, then press the
key. The following number types appear in the display:
4. Use the navigation keys to highlight the desired number
type, then press the key. The Contacts entry
information appears in the display.
5. Press the key again to add the number to the
existing entry.
Home Office Mobile
Pager Fax
Home Office Mobile
Pager Fax
Section 6: Understanding Your Contacts 85
Deleting a Contacts Entry
Section 6
Deleting a Contacts Entry
1. Find the Contacts entry you want to delete. See “Finding
a Contacts Entry” on page 73 for more information.
2. Use the navigation keys to highlight the desired entry.
3. Press the Option (left) soft key . The following options
appear in the display:
䢇Edit
䢇Erase
䢇Add New
4. Use the navigation keys to highlight Erase.
5. Press the key. The phone prompts you to confirm
the deletion.
6. Use the navigation keys to highlight Yes or No, then
press the key.
Note: To delete all Contacts entries, see “Erase Memory” on page 183 for
more information.
Finding My Phone Number
My Phone# displays the ten-digit number assigned to
your phone by your wireless carrier.
■In standby mode, press the Menu (left) soft key ( ),
then press (for Contacts), and press for My
Phone#. The phone number assigned by your wireless
carrier appears in the display.
86
Section 6
Memory
The Memory menu option lets you view the amount of
memory you have used to store Contacts entries, as
well as the memory remaining to store more Contacts
entries.
■In standby mode, press the Menu (left) soft key ( ),
then press (for Contacts) and (for Memory).
The amount of memory used and remaining for Contacts
is displayed.
Section 7: Messaging 87
Section 7
Section 7: Messaging
Topics Covered
• Types of Messages
• Create and Send Text Messages
• Receive Text Messages
• Send Picture Messages in Camera Mode
• Send Picture Messages in Standby Mode
• Message Folders
• Message Settings
• Erase Messages
This section explains how to send or receive different
types of messages. This section also describes the features
and functionality associated with messaging.
88
Section 7
Types of Messages
Your phone is able to send and receive Text and Picture
messages to compatible phones and devices. Text
messages can be up to 160 characters in length.
Note: Available memory is shared between all messages. You can store up
to 50 incoming and 50 outgoing messages. However, the exact number is
dependent upon message length.
Create and Send Text Messages
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Messages) and for New Text
Msg. The Send To: screen appears in the display.
2. Enter the phone number of the recipient, then press the
key.
3. Enter the text content of your message using the keypad.
See “Section 5: Entering Text” on page 63 for more
information.
4. At any point while composing a message, press the
Option (left) soft key ( ). The following options appear
in the display:
䢇T9 Word—Recognizes commonly used words for the numeric
sequence of key presses and inserts the word into your
message.
䢇ABC—Enter characters while by pressing the key that
contains the desired characters (such as for “h”).
䢇Symbol—Use Symbol mode to enter symbols, such as &, %,
and # into your message.
䢇123—Use 123 mode to enter numbers into your message.
Section 7: Messaging 89
Create and Send Text Messages
Section 7
䢇Canned—Insert a pre-composed message into the body of
your current message.
5. Once you’re finished entering your message, press the
key. The following New Message options appear in
the display:
䢇Edit Send To—Edit the recipient’s Send To number.
䢇Edit Text—Edit the content of your message.
䢇Send Options—Choose the Priority, Validity, Privacy, whether
you wish to have a Delivery Acknowledgement, Insert a
Signature or Call Back #, and whether you wish to Defer
Delivery of the message to some particular time.
䢇Save in Draft—Save the message to your Draft folder.
䢇Save Text—Save the text in your message as a Canned
Message. Canned Messages are pre-composed messages
that you can insert into any message you choose.
6. To send your message, press the Send (left) soft key
().
90
Section 7
Send Options
You can set priority, validity, privacy, and other options
before you send a message.
1. After you’ve composed a message and pressed the
key, you’re returned to the New Message menu.
2. Use the navigation keys to highlight Send Options, then
press the key. The following send options appear in
the display:
䢇Priority—Normal/Urgent—Assign a priority to your message.
䢇Validity—None/30 Min/1-12 Hours/1-3 Days—Select the
period of time that you wish the message to be available to the
recipient. After the set period of time, your message is recalled.
䢇Privacy—Not Restricted/Restricted/Confidential—Choose the
desired level of privacy for your message.
䢇Delivery Ack—Off/On—Request confirmation for when your
message is received.
䢇Insert Sign.—Off/On—Insert your pre-composed signature
into the message.
䢇Call Back #—Yes/No/Edit—Insert a number into your
message for the recipient to call you back.
䢇Def. Delivery—Immediate/Set Time—Choose when you
wish your message to be sent.
3. Use the navigation keys to highlight the desired send
option and press the key to confirm the selection or
to enter the send option’s sub menu.
Section 7: Messaging 91
Receive Text Messages
Section 7
Receive Text Messages
When you receive a message in standby mode, the
ringer sounds, (unless turned off), and New Message
appears in the display along with the closed envelope
icon ( ). The date and time of the message also appear
in the display:
• Press the Ignore (left) soft key ( ) to return your phone to
standby mode. The message is saved to your inbox where you
can view it later.
• Press the View (right) soft key ( ) to open the message,
where you have the option to Reply, Forward, Delete, Save Text,
or Save Msg.
Receive Messages While in a Call
When you receive a message while in a call, New
Message appears in the display along with the closed
envelope icon ( ). To view the message without
disconnecting the call:
1. Press the Ignore (left) soft key ( ) to ignore the
message and save it to your inbox where you can view it
later.
2. Press the View (right) soft key ( ) to open the message,
your call remains connected.
92
Section 7
Send Picture Messages in Camera Mode
Picture messages can be sent to recipients with
compatible phones or devices. You can even
accompany a Picture message with a voice memo or
preloaded sound.
Tip: You can send a Picture message to up to ten recipients. Separate each
recipient’s address or phone number with a comma in the Send to field of
the Picture message composer.
1. In standby mode, press the Camera button ( ) on the
right side of the phone. The Camera menu appears in the
display with Take a Picture highlighted.
2. Press the key. The camera activates.
3. Using the display as a viewfinder, press the key
when the image that you wish to send appears in the
display.
Note: For more information about using the camera feature in your phone,
see "Section 11: Camera" on page 131.
4. Press the key. The Picture message composer
appears in the display with the Send to field highlighted
and the picture that you just snapped showing in the
Picture field.
5. Enter the phone number or e-mail address of the
recipient of the Picture message.
Tip: Press the left soft key ( ) Option to display a pop-up menu that
allows you to search your Contacts for a recipient, insert symbols and
letters, or send the Picture message to the OnlineAlbum.
Section 7: Messaging 93
Send Picture Messages in Camera Mode
Section 7
6. Press the Down navigation key to move the cursor to the
Subject field, then enter a subject for the Picture
message using the keypad.
7. Press the Down navigation key until the Message field is
highlighted, then enter the message text using the
keypad.
See “Section 5: Entering Text” on page 63 for more
information.
8. If you wish to insert a sound into your Picture message,
follow the instructions in steps 9 through 11. Otherwise,
proceed to step 12.
9. Use the navigation keys to highlight the Sound field.
10.Press the Option (left) soft key ( ). The following
options appear in the display:
䢇Record New—Record a new memo to insert into the
message.
䢇Voice Memo—Insert a pre-recorded memo into the
message.
䢇My Melody—Select from a list of downloaded audio files.
䢇Preloaded—Insert a preloaded ring tone into the message.
䢇Delete—Delete a sound that you have inserted into the
message.
Note: You can record and insert a voice memo of up to 30 seconds in
length if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount of
remaining memory.
11.Use the Up/Down navigation keys to highlight an option,
then press the key to enter the option’s sub menu
and insert a sound into your message. Press to
exit the pop-up menu without inserting a sound.
94
Section 7
12.To preview the Picture message before sending,
press the Next (right) soft key ( ), then select Preview
from the list of options that appears in the display.
13.Press the SEND (left) soft key ( ) to send the message.
“Do you want to save?” prompt appears in the display.
14.Use the navigation keys to highlight Yes, then press the
key. Pic. Msg Sending appears in the display and
a progress bar indicates the send status.
15.To send the Picture message now, press the key.
Pic. Msg Sending appears in the display and a progress
bar indicates the send status.
Send Picture Messages in Standby Mode
Send Picture messages to recipients with a compatible
phone or other device, and accompany the Picture
message with a voice memo, ring tone, or downloaded
melody.
Note: You can send a Picture message to up to ten recipients. Separate
each recipient’s address or phone number with a comma in the Send to
field of the Picture message composer.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Messages) and for New Pic.
Msg. The Blank Card screen appears in the display with
the Send to field highlighted.
2. Enter the phone number or e-mail address of the
recipient using the keypad.
Section 7: Messaging 95
Send Picture Messages in Standby Mode
Section 7
Tip: Press the Option (left) soft key ( ) to display a pop-up menu that
allows you to search your Contacts for a recipient, insert symbols and
letters, or send the Picture message to the OnlineAlbum.
3. Press the Down navigation key to move the cursor to the
Subject field. Enter a subject for the Picture message
using the keypad.
4. Press the Down navigation key until the No Photo image
is highlighted. The No Photo image resembles a film
slide.
5. Press the Option (left) soft key ( ). The following
options appear in the display:
䢇Take a Pic.—Snap a picture to insert into your Picture
message.
䢇Gallery—Select from a list of pictures that you have taken to
insert into your Picture message.
䢇My Image—Select from a list of downloaded pictures into
your Picture message.
䢇Preloaded—Select from a list or preloaded images to insert
into your Picture message.
䢇Delete—Delete any images that you have attached to your
Picture message.
6. Use the Up/Down navigation keys to highlight an option,
then press the key to enter the option’s sub menu
and insert an image into your Picture message.
7. Once you’ve inserted the image into your message, use
the navigation to highlight the Message field.
8. Enter the message text using the keypad.
See “Section 5: Entering Text” on page 63 for more
information.
96
Section 7
9. If you wish to insert a sound into your Picture message,
follow the instructions in steps 10 through 12.
Otherwise, proceed to step 13.
10.Press the Down navigation key to highlight the Sound
field.
11.Press the Option (left) soft key ( ). The following
options appear in the display:
䢇Record New—Record a new memo to insert into the
message.
䢇Voice Memo—Insert a pre-recorded memo into the
message.
䢇My Melody—Select from a list of downloaded audio files.
䢇Preloaded—Insert a preloaded ring tone into the message.
䢇Delete—Delete a sound that you have inserted into your
Picture message.
Note: You can record and insert a voice memo of up to 30 seconds in
length if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount of
remaining memory.
12.Use the Up/Down navigation keys to highlight an option,
then press the key to enter the option’s sub menu
and insert a sound into your message.
13.You can now send or preview the Picture message.
14.To preview the Picture message before sending,
press the Next (right) soft key ( ), then select Preview
from the selection list that appears in the display.
15.Press the SEND (left) soft key ( ) to send the message.
“Do you want to save?” prompt appears in the display.
Section 7: Messaging 97
Send Picture Messages in Standby Mode
Section 7
16.Use the navigation keys to highlight Yes, then press the
key. Pic. Msg Sending appears in the display and
a progress bar indicates the send status.
17.To send the Picture message now, press the key.
Pic. Msg Sending appears in the display and a progress
bar indicates the send status.
Receive Picture Messages
1. When you receive a new Picture message, the phone
number (or email address) from which the message was
sent, and Pic. Msg Retrieving... appears in the display.
A progress bar indicates retrieval status.
2. After the Picture message has downloaded, an alert
sounds. Ignore and View also appear in the display.
3. Press the Ignore (left) soft key ( ) to view the Picture
message later. Press the View (right) soft key ( ) to
view the Picture message now.
View a Picture Message Later
1. Once a Picture message has been downloaded to your
phone, the Ignore (left) soft key ( ) and View (right)
soft key ( ) and appear in the display.
2. Press the Ignore (left) soft key ( ). The Picture
message is sent to your Inbox.
3. In standby mode, press the Menu (left) soft key ( ),
then press (for Messages), (for Inbox) to
open your Inbox and view the picture message.
For more information on viewing your Inbox messages,
see “Inbox” on page 98.
98
Section 7
Message Folders
Your phone stores messages in any one of five folders.
The subsections that follow describe each message
folder in detail.
Voice Mail
Messages in your voice mailbox are logged in the Voice
Mail folder of the Message menu. Open the Voice Mail
folder to view the Callback # (if available), Urgency,
and other details of the voice mail message.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Messages) and for Voice Mail.
2. Use the navigation keys to highlight the message that
you wish to view.
3. Press the key to view contents of the highlighted
message.
4. Press the send key ( ) SEND:Listen to call your voice
mailbox and listen to the message.
Note: You can also press and hold to dial your voice mailbox.
Inbox
Received messages of all types (except Voice Mail) are
stored in the Inbox folder.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Messages) and for Inbox. A
list of incoming messages appears in the display.
Tip: Press the MSG (right) soft key ( ) while in a call to open the Message
menu.
Section 7: Messaging 99
Message Folders
Section 7
2. Use the navigation keys to highlight the message that
you wish to view.
3. Press the key to view contents of the highlighted
message.
4. While viewing your message press the Option (left) soft
key ( ). The following options appear in the display:
䢇Forward—Forward the message to another recipient.
䢇Delete—Delete the message and its contents.
䢇Save Text—Save only the text in the message.
䢇Save Msg—Save the message to the Saved message folder.
䢇Save Addr—Save the sender’s number to your Contacts.
䢇Block Addr—Block future messages from the sender.
5. Use the navigation keys to highlight an option. Press the
key to perform the function for the highlighted
option.
Outbox
Your phone stores messages in the Outbox, regardless
of whether the message was successfully transmitted.
Verify if and when a message or e-mail was successfully
transmitted by enabling the Delivery Ack feature. See
"Send Options" on page 90 for more information on
delivery acknowledgements.
Review Messages in the Outbox
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Messages) and for Outbox.
Your list of sent messages appear in the display.
2. Use the navigation keys to highlight the message that
you wish to review, then press the key.
100
Section 7
3. Press the Option (left) soft key ( ). The following
options appear in the display:
䢇Re-send—Re-send the message.
䢇Save Msg—Save the message to the Saved Msg folder.
䢇Delete—Delete the message.
Note: If the message was not delivered, the options listed above do not
appear in the display.
4. Use the navigation keys to highlight the desired option.
5. Press the key to perform the function for the
highlighted option.
Messages and Lock Mode
Your phone can still receive messages while in Lock
Mode. The time and date of the message appear in the
display, but you cannot access the message until you
enter the lock code.
Draft Box
Messages in the Draft Box are those that have been
composed but never sent. You can return to the Draft
Box at any time to view, edit, or send a draft message.
Create a Draft Message
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Messages) and for New Text
Msg, or for New Pic. Msg.
2. Enter the phone number of the recipient, then press the
key.
3. Compose your message using the keypad, then press
press the key.
Section 7: Messaging 101
Message Folders
Section 7
4. Use the navigation keys to highlight Save in Draft, then
press the key. A confirmation message appears in
the display and your message is saved to the Draft Box.
View and Edit Draft Text Messages
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Messages) and for Draft Box.
A list of any draft messages that you’ve composed
appears in the display.
2. Use the navigation keys to highlight the message that
you wish to view, then press the key. Information
about the selected draft message appears in the display.
3. Press the Option (left) soft key ( ). A pop-up menu
appears in the display with Edit highlighted.
4. Press the key. The following options appear in the
display:
䢇Edit Send To—Edit the phone number of the recipient.
䢇Edit Text—Edit, format, or add media and pre-composed text
to the message.
䢇Send Options—Select the priority, validity, privacy, delivery
acknowledgement, insert signature, callback #, deferred
delivery options.
䢇Save in Draft—Continue to save the message to the Draft
Box.
䢇Save Text—Save only the text in the message, if media or
other content is contained within the message.
5. Use the navigation keys to highlight an option. Press the
key to perform the function for the highlighted
option.
102
Section 7
View and Edit Draft Pic. Messages
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Messages) and for Draft Box.
A list of any draft messages that you’ve composed
appears in the display.
2. Use the navigation keys to highlight the message that
you wish to view, then press the key. Information
about the selected draft message appears in the display.
3. Press the View (left) soft key ( ). The contents of the
message appears in the display.
4. Press the Option (left) soft key ( ). A pop-up menu
appears in the display with Edit highlighted.
5. Press the key. The message edit screen appears in
the display.
6. Make any needed changes and press the Next (right)
soft key ( ). The following options appear in the
display:
䢇Preview—Shows the message contents.
䢇Send Options—Select the priority, validity, privacy, delivery
acknowledgement, deferred delivery options.
䢇Save in Draft—Saves the changed message to the Draft Box.
7. Use the navigation keys to highlight an option. Press the
key to perform the function for the highlighted
option.
Section 7: Messaging 103
Message Folders
Section 7
Edit Text Options
1. While editing the text of a draft message, press the
Option (left) soft key ( ). The following options appear
in the display:
䢇T9 Word—T9 Word recognizes commonly used words for the
numeric sequence of keypress and inserts the word into your
message.
䢇ABC—Enter characters by pressing the key that contains the
desired characters (such as for “h”).
䢇Symbol—Use to enter symbols, such as &, %, and # into your
message.
䢇123—Use to enter numbers into your message.
䢇Below Image/Above Image—(Pic message only) Places the
text below or above picture/image file in the message.
䢇Canned—Insert text from a pre-composed Canned Message
into the current message.
2. Use the navigation keys to highlight an option. Press the
key to perform the function for the highlighted
option.
Saved Box
Once you view messages in your Inbox folder, you can
then save the message to the Saved Box.
Saving Messages to the Saved Box
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Messages) and for Inbox. A
list of your Inbox messages appears in the display.
2. Use the navigation keys to highlight the message that
you wish to view (and save), then press the key.
104
Section 7
3. Press the Option (left) soft key ( ). A pop-up menu
appears in the display.
4. Use the navigation keys to highlight Save Msg, then
press the key. The message is saved to the Saved
Box.
Viewing Messages in the Saved Box
To view the messages stored in your Saved Box, do the
following:
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Messages) and for Saved Box.
A list of your Inbox messages appears in the display.
2. Use the navigation keys to highlight the message that
you wish to view (and edit, delete, or save portions of),
then press the key. Information about the selected
message appears in the display.
3. Press the View (left) soft key ( ) to view the contents of
the message.
4. Use the navigation keys to scroll through the message
contents.
Editing Messages in the Saved Box
To view the messages stored in your Saved Box, do the
following:
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Messages) and for Saved Box.
A list of your Inbox messages appears in the display.
2. Use the navigation keys to highlight the message that
you wish to view (and edit, delete, or save portions of),
then press the key. Information about the selected
message appears in the display.
Section 7: Messaging 105
Message Settings
Section 7
3. Press the View (left) soft key ( ) to open the message.
4. Press the Options (left) soft key ( ). The following
options appear in the display:
䢇Edit—Lets you change and save or send the message.
䢇Delete—Removes the message from the Saved Box.
䢇Save Text / Save Picture / Save Sound / Save Addr
(Picture messages only)—Lets you save portions of a picture
message for reuse and/or create a Contacts entry.
The Edit option is highlighted.
5. Press the key. Depending on the type of message
selected, one of the following appears in the display:
䢇For text messages, the New Message menu appears in the
display. See “Create and Send Text Messages” on page 88 for
more information.
䢇For picture messages, the Blank Card screen appears in the
display with the Send to field highlighted. See “Send Picture
Messages in Standby Mode” on page 94 for more information.
Message Settings
Use the Msg Setting menu to define settings for
picture, text, and general messages.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Messages) and for Msg
Setting. The Msg Setting menu appears in the display.
2. Use the navigation keys to highlight Text, Pic. Msg, or
General.
3. Use the instructions in the following subsections to
change settings for Text, Pic. Msg, and General
messages.
106
Section 7
Text Message Settings
1. With Text highlighted in the Msg Setting sub menu,
press the key. The following text message options
appear in the display:
䢇Save in Outbox—Options to save messages automatically in
the Outbox, prompt before saving, or do not save messages to
the Outbox.
䢇Insert Sign.—Insert a signature into each outgoing message.
䢇Delivery Ack—Choose to be notified (or not) on whether your
messages have been delivered.
䢇Direct View—Options are Off or On. With Direct View on, the
full content of text messages appear in the display as they are
received.
䢇Signature—Create a signature, which appears at the bottom
of all outgoing messages.
䢇Callback#—Edit the callback# for all of your messages.
䢇Block Address—Block or Unblock the reception of text
messages from a specific number, or view the list of blocked
addresses.
2. Use the navigation keys to highlight the desired setting.
Press the key to enter the highlighted option’s sub
menu.
Picture Message Settings
1. With Pic. Msg highlighted in the Msg Setting sub menu,
press the key. The following options appear in the
display:
䢇Save in Outbox—Options to save messages automatically in
the Outbox, prompt before saving, or do not save messages in
the Outbox.
Section 7: Messaging 107
Message Settings
Section 7
䢇Delivery Ack—Choose to be notified whether your messages
have been delivered or not.
䢇Retrieval Mode—Choose Automatic to download and display
Picture messages as they are received. Choose Prompt Mode
to be notified beforehand.
2. Use the navigation keys to highlight the desired setting.
Press the key to enter the highlighted option’s sub
menu.
General Message Settings
1. With General highlighted in the Msg Setting sub menu,
press the key. The following options appear in the
display:
䢇Entry Mode—Choose the default method for entering text
into messages. Options are T9 Word and Alphabet.
䢇Canned Msg.—Edit your pre-composed messages, which
can then be inserted into new messages.
䢇Msg. Alert—Choose the volume level (or vibrate) when
alerted of a message. Choose the alert message type, and
frequency of alerts.
䢇Auto Delete—Choose to receive (or not receive) a warning
message when you delete a message.
䢇Voice Mail #—Edit or view your Voice Mail number.
2. Use the navigation keys to highlight the desired setting.
Press the key to enter the highlighted option’s sub
menu.
108
Section 7
Erase Messages
You can erase all of the messages in each your folders
from one convenient location.
Note: This function erases all messages in the selected folder. To delete a
single message, open the folder from the Message menu, then delete the
message from the Option menu while viewing the message content.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Messages) and for Erase Msg.
The following options appear in the display:
䢇Voice—Deletes all Voice Mailbox log entries.
䢇Inbox—Deletes all messages stored in the Inbox.
䢇Outbox—Deletes all messages stored in the Outbox.
䢇Draft—Deletes all messages stored in the Draft folder.
䢇Saved—Deletes all messages stored in the Saved Box.
䢇All Messages—Deletes all messages stored in all of the
message folders.
2. Use the navigation keys to highlight the folder containing
the messages that you wish to delete.
3. Press the key. You’re prompted to confirm the
erasure of all messages in the selected folder or in all
folders.
4. Use the navigation keys to highlight Yes or No, then
press the key.
Section 8
Section 8: easyedgeSM 109
Section 8: easyedgeSM
Topics Covered
• Applications Shopping and Downloading
• Changing Your easyedgeSM Settings
• Using On-line Help
With easyedgeSM, you can download full featured
applications over the air including games, personalized
ring tones, pictures, and more. You can send and
receive instant messages and email, or browse the web
to catch up on all the latest news.
This section outlines how to obtain games and other
applications for your phone. For more information,
contact your wireless provider.
Section 8
110
Applications Shopping and Downloading
Download games, ring tones, e-mail, and more using
easyedgeSM. For information on airtime charges, contact
your Wireless Provider.
1. In standby mode, press the Right navigation key. The
following easyedgeSM options appear in the display:
2. Use the navigation keys to highlight the easyedgeSM icon
( ), then press the key. Your phone takes a
moment to connect, then the easyedgeSM Catalog menu
appears in the display.
3. Follow the instructions in your phone’s display.
Note: Please check with your Wireless Provider for availability of
applications.
Changing Your easyedgeSM Settings
Use the Settings menu in easyedgeSM to manage, move,
order applications, and much more.
1. In standby mode, press the Right navigation key to
launch easyedgeSM.
easyedgeSM Settings Help
Section 8: easyedge 111
Using On-line Help
Section 8
2. At the easyedgeSM menu, use the navigation keys to
highlight the Settings icon ( ), then press the
key. The following options appear in the display:
䢇Order Apps—Download applications over the network.
䢇Move Apps—Move previously downloaded applications
between available folders.
䢇Manage Apps—View used and available memory.
䢇Main Menu View—Select whether you wish to view the
main easyedgeSM menu in a list or icon format.
䢇Screensavers—View downloaded screensavers.
䢇View Log—View the easyedgeSM log, which displays
information about recent activity using easyedgeSM.
3. Use the navigation keys to highlight the desired option.
4. Press the key to enter the option’s sub menu and
view or change settings.
Using On-line Help
The Help sub menu within easyedgeSM is a short
tutorial on several easyedgeSM features. View
information about charges, cancelling subscriptions,
buying apps, disabling apps, and more.
1. Within in the easyedgeSM menu, use the navigation keys
to highlight the Help ( ) icon.
2. Press the key. The Help subjects described in the
following subsections appear in the display.
3. Use the navigation keys to highlight the desired Help
subject.
4. Press the key to view the selected Help
information.
Section 8
112
Buying New Apps
To buy new and exciting apps, visit the easyedgeSM
Shop. It provides you with a variety of apps you can
choose from.
What do I pay?
When you buy an app, you will be charged for the
purchase cost of the app and the network connections
to download it. Charges will also apply when you use
apps that require network connections, such as
downloading information and sending text messages.
Charges
Charges will apply for network connections. A network
connection is used when you are browsing the
easyedgeSM Shop, downloading and restoring apps, or
canceling subscription apps. Charges will also apply
when you use apps that require network connections,
such as downloading information and sending text
messages.
Cancelling Subscription
1. To cancel a subscription to an app, choose Settings,
then Manage apps.
2. Select the app subscription you want to cancel.
Demo Apps
A Demo app is free and is designed to demonstrate the
app’s main features. It usually expires after a certain
period of time or a number of uses and often has
limited functions. When you run a demo app, you will
Section 8: easyedge 113
Using On-line Help
Section 8
be presented with a purchase option so you won’t have
to look for the app in the easyedgeSM Shop.
Removing Apps
You may remove apps that are no longer needed.
When you remove an app, you cannot use the
application unless you purchase it again. To remove an
app, do the following:
1. In the easyedgeSM screen, choose Settings, then choose
Manage Apps.
2. Select the app you want to remove.
Disabled Apps
You can install new apps even if the memory of your
phone is full by partially removing (disabling) apps
you haven’t used recently. When you need to use a
disabled app, you can restore it at no additional
purchase cost.
Restoring Apps
Disabled apps can be quickly restored at no additional
purchase cost. To restore an app, run the application
you want to restore from the Main Menu. You will be
guided through the restoration process.
Expired Apps
Apps that were purchased based on the number of uses
or for a specified period of time expire. You can
purchase additional uses from the easyedgeSM Shop.
Section 8
114
Section 9: Display 115
Section 9
Section 9: Display
Topics Covered
• Display Settings
• Menu Style
• Animation
• Front Display
• Banner
• Backlight
• Auto Hyphen
• Service LED
This section shows you how to change your phone’s
menu appearance, display brightness and contrast, and
display content to better meet your needs.
116
Section 9
Display Settings
You can set the menu style, standby mode animation,
customize backlight settings, and more in the Display
sub menu.
1. In standby mode, press the Menu (left) soft key ( ),
then press for Display. The following menus
appear in the display:
䢇Menu Style—Choose how main menus appear in the display
when the Menu (left) soft key( ) is pressed.
䢇Animation—Choose the images that display on your phone
when you turn it on, turn if off, and while in standby mode.
䢇Front Display—Select the contrast and wallpaper for the
display on the outside of the folder.
䢇Banner—Create your own personalized greeting that appears
in the display when your phone is in standby mode.
䢇Backlight—Set backlight options for the display and keypad.
䢇Auto Hyphen—With Auto Hyphen enabled, your phone
automatically hyphenates numbers as they are entered.
䢇Dial Digits—Lets you select the color of your dialing font.
䢇Dial Screen—Lets you select the background color for the
dialing screen. You can choose from a variety of colors.
䢇Service LED—Enable or disable the Service LED.
2. Use the navigation keys to highlight a sub menu.
3. Press the key to enter the highlighted sub menu.
The following sections describe the Display sub menus in
greater detail.
Section 9: Display 117
Menu Style
Section 9
Menu Style
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Display) and for Menu Style.
The following options appear in the display:
䢇Icon—Shows all main menus as an array of icons.
䢇Nature—Shows main menus in scrollable list (text) format.
2. Use the navigation keys to highlight Icon or Nature, then
press the key.
Animation
Animation lets you choose the animated pictures that
appear in your phone’s display when you turn it on,
turn it off, and while in standby mode.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Display) and for Animation.
The following options appear in the display:
䢇Opening—Lets you select an animated image file that
appears in the display during the phone’s power on sequence.
䢇Closing—Lets you select an animated image file that appears
in the display during the phone’s power off sequence.
䢇Wallpaper—Lets you select an animated image file that
appears in the display when your phone is in standby mode.
118
Section 9
2. Use the navigation keys to highlight the desired
animation, then press the key. The following
options appear in the display:
䢇Gallery—Lets you select a saved picture as an Opening,
Closing, or Wallpaper image.
䢇Video Gallery—Lets you select a saved video as an Opening,
Closing, or Wallpaper image.
䢇My Image—Lets you select an image that you’ve downloaded
from the Internet as an Opening, Closing, or Wallpaper image.
䢇Preloaded—Lets you select an image that came preloaded
with your phone as an Opening, Closing, or Wallpaper image.
3. Use the navigation keys to highlight the image type that
you wish to use and press the key. A list of images
appears in the display.
4. Use the navigation keys to highlight the image that you
wish to use and press the key to save your
selection.
Front Display
The Front Display sub menu allows you to select from
three different clocks (for wallpaper) and adjust the
contrast for the LCD on the front of the folder.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Display) and for Front
Display.
2. Use the navigation keys to select Wallpaper or Contrast,
then press the key.
Section 9: Display 119
Banner
Section 9
If you select Wallpaper
3. Use the Left or Right navigation keys to select from
Analog clock1, Analog clock2, or Digital Clock.
If you select Contrast
4. Use the volume key or any of the navigation keys to
adjust the contrast to your desired setting.
Banner
Create your own personalized greeting that appears in
the display while your phone is in standby mode.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Display) and for Banner.
Tip: Press and hold to erase an existing banner, if necessary.
2. Enter a word or short phrase to appear in your phone’s
display while in standby mode (Up to 13 characters).
3. Press the key to save the new banner.
120
Section 9
Backlight
You can set the backlight for your display or keypad to
remain on for a specified period of time or remain on as
long as the folder is open.
Note: Prolonged backlight use drains your battery faster.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Display) and for Backlight.
The following sub menus appear in the display:
䢇LCD—Sets the time the internal display backlight remains on
after a period of inactivity. Optional settings are: 5 seconds, 10
seconds, 15 seconds, and Folder Open.
䢇Keypad—Sets the amount of time the keypad backlight
remains on after a period of inactivity. Optional settings are: 5
seconds, 10 seconds, 15 seconds, and Folder Open.
䢇Power save—Unless the backlight settings have been
changed, the backlight dims after a minute of inactivity, and
then turns off. With Power save enabled (On), the backlight for
the internal display is always dim. After one minute of inactivity,
Power save turns the backlight off.
2. Use the navigation keys to highlight the desired sub
menu and press the key.
3. Use the navigation keys to change settings as desired
the selected sub menu.
Section 9: Display 121
Auto hyphen
Section 9
Auto hyphen
Auto Hyphen automatically hyphenates phone
numbers as they are entered. For example: 580-437-
0000.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Display) and for Auto Hyphen.
The following options appear in the display:
䢇Yes—Enables Auto Hyphen.
䢇No—Disables Auto Hyphen.
2. Use the navigation keys to highlight the desired setting
and press the key to save the setting.
Dial Digits
Lets you select the color of your dialing font.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Display) and for Dial Digits.
The following options appear in the display:
䢇Hyphenated—Each set of entered digits (area code,
exchange, and directory number) each appear in a different
color.
Note: To select the Hyphenated option, you must first set the Auto
Hyphen to On.
䢇Rainbow—Entered digits each appear in a different color in
the dialing screen.
䢇Basic—Entered digits appear as black in the dialing screen.
2. Use the navigation keys to highlight the desired setting
and press the key to save the selected setting.
122
Section 9
Dial Screen
Lets you select the background color for the dialing
screen. You can choose from a variety of colors.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Display) and for Dial Screen.
The following options appear in the display:
䢇Color Setting—Shows a preview of the Dialing Screen and a
color selection bar.
䢇Off—Sets the dialing screen background color to the default
value (white).
2. Use the navigation keys to highlight the desired option,
then press the the key.
3. If you select Color Setting, use the navigation keys to
highlight the desired background color (which appears in
the preview screen), then press the key to save the
selected color setting.
Service LED
You can enable or disable your phone’s Service LED.
The Service LED is located to the right of the folder
hinge, on the front of your phone. The Service LED
notifies you of the charge status, incoming calls, and
more.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Display) and for Service LED.
The following options appear in the display:
䢇Off—Disables the service LED.
䢇On—Enables the service LED.
Section 9: Display 123
Service LED
Section 9
2. Use the navigation keys to highlight the desired setting
and press the key to save the selected setting.
124
Section 9
Section 10: Sounds 125
Section 10
Section 10: Sounds
Topics Covered
• Volume/Vibrate
• Ringer Type
•Key Beep
•Alerts
•Power On/Off
• Roam Ringer
• Whisper Mode
This section shows you how to customize your phone’s
audio properties, such as ringers, keypad tones, alerts,
shut down sounds, and more.
126
Section 10
Volume/Vibrate
Use the Volume/Vibrate sub menu to set the default
volume for incoming calls and alarms.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Sounds) and for Volume/
Vibrate. The following options appear in the display:
䢇Calls—Lets you set your phone to be silent, play a sound,
and/or vibrate in response to incoming calls.
䢇Alarm—Lets you set your phone to be silent, play a sound,
and/or vibrate in response to a preset alarm time being
reached.
2. Use the navigation keys to highlight the desired option,
then press the key.
3. Use the navigation keys or the up and down volume keys
on the left side of your phone to select the volume level
(Silent, 1 Beep, or Levels 1 – 5) or vibrate mode
(Vibrate, Vib+Ring) for the selected option.
4. Press the key to save the option setting.
Ringer Type
You can assign ring tones and melodies for calls,
alarms, and other alerts in the Ringer Type sub menu.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Sounds) and for Ringer Type.
The following ringer types appear in the display:
䢇Calls
䢇Alarm
䢇Data
䢇Planner
Section 10: Sounds 127
Key Beep
Section 10
2. Use the navigation keys to highlight a ringer type, then
press the key. A pop-up menu with the following
options appears in the lower left of the display:
Note: My Melody doesn’t contain ringers or tones, unless you’ve
previously downloaded them over the air.
䢇My Melody
䢇Preloaded
3. Use the navigation keys to highlight Preloaded, then
press the key.
4. Use the volume keys to scroll through the ringer types
and melodies for the selected ringer type. Each tone
plays as you scroll through the list.
5. When the desired ringer type plays, press the key
to save.
Key Beep
Key Beep allows you to adjust the volume level and
length of tone that the keypad generates each time you
press a key.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Sounds) and for Key Beep.
Volume is highlighted.
2. Press the key.
3. Use the volume keys or navigation keys to set the
volume level for keypad tones.
128
Section 10
4. Press the key when the desired key beep volume
setting is reached. You’re returned to the Key Beep sub
menu.
5. Use the navigation keys to highlight Tone Length, then
press the key.
6. Use the navigation keys to highlight Long or Normal.
7. Press the key to save your settings.
Alerts
You can set your phone to sound an alert whenever you
enter or leave your service area, connect or disconnect a
call, and other options.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Sounds) and for Alerts. The
following options appear in the display:
䢇Minute Beep—Sound an alert ten seconds before each
elapsed minute of a call.
䢇Service—Sound an alert when you go into and out of
coverage areas.
䢇Connect—Sound an alert when you connect a call.
䢇Disconnect—Sound an alert when you disconnect a call.
䢇Fade—Sound an alert when a dropped call occurs during a
conversation.
䢇Roam—Sound an alert when you leave your home service
area while on a call.
䢇Privacy—Emit a tone whenever you are in enhanced privacy
mode.
2. Use the navigation keys to highlight a sub menu, then
press the key.
Section 10: Sounds 129
Power On/Off
Section 10
3. Use the navigation left/right keys to activate (or not
activate) the selected alerts.
4. Press the key to confirm your selection.
Power On/Off
Set your phone to play a sound whenever you turn the
phone on and off.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Sounds) and for Power On/
Off.
2. Use the navigation keys to highlight On or Off, then press
the key.
Roam Ringer
Set your phone to sound a unique tone when a call is
received outside a network service area. This feature is
set to Off by default.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Sounds) and for Roam Ringer.
2. Use the navigation keys to highlight On or Off, then
press the key.
130
Section 10
Whisper Mode
This feature allows you to talk in a low volume during
a phone conversation and still be heard by the party.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Sounds) and for Whisper
Mode.
2. Use the navigation keys to highlight On or Off, then press
the key.
Section 11: Camera 131
Section 11
Section 11: Camera
Topics Covered
• Taking Pictures
• Saving Pictures
• The Picture Gallery
• Taking Videos
• The Video Gallery
• Camera Settings
• Point, Click, and Send a Picture
Use your SCH-a670 phone to take full color digital
pictures, display them on your phone’s vivid color
display, and instantly share them with family and
friends. It’s fun, and as easy to use as a traditional
point-and-click camera. Depending on the resolution
you choose, you can save dozens of pictures in your
phone’s memory.
This section explains how you can do the following:
• Take pictures with your phone’s built-in digital camera.
• Send and receive pictures taken with your phone’s camera.
• Set the several options associated with the camera that help
you take crisp, clear pictures.
132
Section 11
Taking Pictures
Taking pictures with the built-in camera is as simple as
choosing a subject, pointing the lens [located on the
outside of the folder (above the external display)], and
pressing a button.
Simple Snap Shot
To take a single picture using the current camera
settings, do the following:
1. In standby mode, press and hold the camera button
( ) on the right side of the phone. The message
“Camera Starting...” followed by a camera view finder
screen appears in the display. (See “Camera Screen” on
page 133 for more information.)
Note: You can also activate the camera by pressing the Menu (left) soft
key( ), then press (for Camera) and for Take a Picture.
2. Point the camera at your subject.
3. Using the display as a viewfinder, press the key
when the image that you wish to capture appears in the
display.
4. Press the Save (right) soft key ( ) to save the picture to
memory.
5. Press the Erase (left) soft key ( ) to erase the photo.
Tip: You can change a number of the camera’s settings to suit particular
uses for your pictures. See “Camera Settings” on page 145 for more
information.
Section 11: Camera 133
Taking Pictures
Section 11
Camera Screen
When you activate your phone’s
camera, the second line of the
display is reserved for the
current camera resolution
setting and the picture counter.
The center of the display shows
a viewfinder image of the
subject at which the camera is
pointed. The soft key labels on
the bottom line of the display
change to the following:
• Option—Pressing the left soft key ( ) opens a pop-up menu of
camera settings.
• OK—Pressing the key takes a picture of the image
currently appearing on the display.
• Gallery—Pressing the right soft key ( ) opens the Picture
Gallery so you can view or manage your stored pictures.
Camera Screen Icons
Camera Resolution—Indicates that you can use the Up
and Down navigation keys to temporarily adjust the
camera’s resolution setting. (You can also change the
default camera resolution setting. See “Camera Settings”
on page 145 for more information.)
Flash—Indicates that the flash is set to On. When you
press the Camera ( ) button or the key to take a
picture, the flash comes on.
Self Timer in use—Delays the camera shutter from 5 to
10 seconds after you press the Camera ( ) button or the
key.
134
Section 11
Multi Shot in use—Takes multiple pictures after you
press the Camera ( ) button or the key. The
number of pictures taken depends upon the resolution
setting.
Camera—Indicates that pressing the key takes a
picture of the image currently appearing on the display.
Camera Options
The Camera Options let you temporarily override your
default camera settings. Any settings you change using
the Camera Options only apply to the current camera
session or until you make another change using the
Camera Options. When you exit camera mode, all
camera settings return to default values.
Flash
The flash built into your phone lets you take pictures in
low light. The Flash option lets you temporarily enable
or disable the flash for individual pictures or multi
shots.
1. In camera mode, press the Option (left) soft key ( ).
The following options appear in the display:
䢇Flash
䢇Self Timer
䢇Multi Shot
䢇Brightness
䢇Fun Frame
䢇Color Tones
Note: Fun Frame and Color Tone are not initially visible in the pop-up
menu. Use the navigation keys to scroll down and view these menu items.
Section 11: Camera 135
Taking Pictures
Section 11
2. Use the navigation keys to highlight Flash, then press
the key. The following options appear in the
display:
䢇Off—When you press the Camera ( ) button or the
key, the flash does not light.
䢇On—When you press the Camera ( ) button or the
key, the flash lights briefly.
Note: When the flash is set to On, the flash icon ( ) appears in the
display in camera mode.
3. Use the navigation keys to select the desired option, then
press the key. The camera screen appears in the
display.
Delay Pictures with the Self Timer
Self Timer lets you delay a picture long enough so you
or the person taking the picture can join others in the
picture.
1. In camera mode, press the Option (left) soft key ( ).
The following options appear in the display:
䢇Flash
䢇Self Timer
䢇Multi Shot
䢇Brightness
䢇Fun Frame
䢇Color Tones
Note: Fun Frame and Color Tone are not initially visible in the pop-up
menu. Use the navigation keys to scroll down and view these menu items.
136
Section 11
2. Use the navigation keys to highlight Self Timer, then
press the key. The following options appear in the
display:
䢇Off
䢇5 sec
䢇10 sec
3. Use the navigation keys to highlight the desired delay,
then press the key. The camera screen appears in
the display.
The next time you press the Camera ( ) button or the
key, a countdown timer appears in the display that
indicates the time remaining before the camera takes
the picture.
Multi Shot
Multi Shot lets you take multiple pictures in succession
at the touch of a button. The number of pictures you
can take depends on the resolution setting, as indicated
in the following list:
• High resolution—3 pictures
• Medium resolution—5 pictures
• Low resolution—7pictures
See “Change Picture Resolution” on page 146 for more
information.
1. In camera mode, press the Option (left) soft key ( ).
The following options appear in the display:
䢇Flash
䢇Self Timer
䢇Multi Shot
䢇Brightness
Section 11: Camera 137
Taking Pictures
Section 11
䢇Fun Frame
䢇Color Tones
Note: Fun Frame and Color Tone are not initially visible in the pop-up
menu. Use the navigation keys to scroll down and view these menu items.
2. Use the navigation keys to highlight Multi Shot, then
press the key. Off and On appear in the display.
3. Use the navigation keys to highlight On, then press the
key. The camera screen appears in the display.
Note: When Multi Shot is set to On, the multi shot icon ( ) appears in the
display in camera mode.
The next time you press the Camera ( ) button or the
key, the camera takes several pictures in rapid
succession.
Brightness
Brightness lets you temporarily adjust your camera to
provide the best quality picture using available light.
Increasing the brightness lightens a picture. Decreasing
brightness darkens a picture.
1. In camera mode, press the Option (left) soft key ( ).
The following options appear in the display:
䢇Flash
䢇Self Timer
䢇Multi Shot
䢇Brightness
䢇Fun Frame
䢇Color Tones
138
Section 11
Note: Fun Frame and Color Tone are not initially visible in the pop-up
menu. Use the navigation keys to scroll down and view these menu items.
2. Use the navigation keys to highlight Brightness, then
press the key. “Brightness” appears in the second
line of the display followed by the current Brightness
setting.
3. Use the Left and Right navigation keys to adjust the
Brightness (the screen image lightens or darkens to
show the affects of your changes), then press the Select
(left) soft key ( ) or the key. The camera screen
appears in the display.
The next time you press the Camera ( ) button or the
key, the camera takes a lighter or darker picture
according to your selected Brightness setting.
Fun Frame
Brightness lets you temporarily apply one of the
preloaded picture frames in your phone to characterize
or enhance one or more pictures.
Note: The Normal frame is a blank frame.
1. In camera mode, press the Option (left) soft key ( ).
The following options appear in the display:
䢇Flash
䢇Self Timer
䢇Multi Shot
䢇Brightness
䢇Fun Frame
䢇Color Tones
Section 11: Camera 139
Taking Pictures
Section 11
Note: Fun Frame and Color Tone are not initially visible in the pop-up
menu. Use the navigation keys to scroll down and view these menu items.
2. Use the navigation keys to highlight Fun Frame, then
press the key. The name of the current frame
appears in the second line of the display.
3. Use the Left and Right navigation keys to show the
various Fun Frames.
4. When you decide on the frame you wish to use, press the
Select (left) soft key ( ) or the key. The camera
screen appears in the display with your selected Fun
Frame in place.
The next time you press the Camera ( ) button or the
key, the camera include the selected Fun Frame in
your picture.
Color Tones
Color Tones lets you temporarily apply one of the
following color-based special affects to one or more
pictures:
• Normal—No special affect.
• Sepia—Replaces all colors with shades of sepia.
• Monochrome—Replaces all colors with shades of grey.
• Negative—Reverses light and dark shades of grey.
• Emboss—Creates a three-dimensional affect in the
Monochrome picture.
• Sketch—Reduces the picture to outlines.
Note: The Normal Color Tone leaves the picture unchanged.
140
Section 11
1. In camera mode, press the Option (left) soft key ( ).
The following options appear in the display:
䢇Flash
䢇Self Timer
䢇Multi Shot
䢇Brightness
䢇Fun Frame
䢇Color Tones
Note: Fun Frame and Color Tone are not initially visible in the pop-up
menu. Use the navigation keys to scroll down and view these menu items.
2. Use the navigation keys to highlight Color Tone, then
press the key. The name of the current Color Tone
appears in the second line of the display.
3. Use the Left and Right navigation keys to show the
various Color Tones and the effects they have on a
picture.
4. When you decide on the Color Tone you wish to use,
press the Select (left) soft key ( ) or the key. The
camera screen appears in the display with your selected
Color Tone applied.
The next time you press the Camera ( ) button or the
key, the camera applies the selected Color Tone to
your picture.
Section 11: Camera 141
Saving Pictures
Section 11
Saving Pictures
After you’ve taken a picture, you can do any of the
following:
• Save the picture by pressing the Save (right) soft key ( ).
The picture is stored in the Picture Gallery, a part of the
phone’s memory devoted to storing, browsing, and viewing
saved pictures.
• Send the picture to someone else by pressing the key.
For a detailed procedure, see “Send Picture Messages in
Camera Mode” on page 92.
• Discard the picture by pressing the Erase (left) soft key ( ).
The Picture Gallery
Saved pictures are stored in the Picture Gallery. You can
browse the picture gallery one picture at a time
(expanded mode), or view several pictures at once in
thumbnail format.
1. In standby mode, briefly press the camera key on the
right side of the phone. The following options appear in
the display:
䢇Take a Picture—Activates your phone’s camera and lets you
take individual photos and multiple photos (multi shots).
䢇Take a Video—Activates your phone’s camera and lets you
take short videos (movies).
䢇Picture Gallery—Lets you view and manage your saved
photos.
䢇Video Gallery—Lets you view and manage your saved
videos.
䢇Settings—Lets you enable or disable the flash and adjust the
camera’s picture resolution, picture quality, and more.
142
Section 11
2. Use the navigation keys to highlight Picture Gallery,
then press the key. Any pictures that you’ve saved
appear in the display.
3. Use the navigation keys to browse pictures in the gallery.
4. Press the Option (left) soft key ( ) while viewing
pictures in the Picture Gallery. The following options
appear in the display:
䢇Pic. Msg—Send the currently displayed or highlighted picture
as a Picture message.
䢇Assign—Assign the currently displayed or highlighted picture
to Wallpaper, as an opening and closing (power on and power
off) graphic, or as a photo ID for someone in your Contacts list.
䢇Rename—Rename the currently displayed or highlighted
picture.
䢇Lock/Unlock—Lock the currently displayed or highlighted
picture so that it cannot be deleted, or unlock the picture so
that it can be deleted.
䢇OnlineAlbum—Send the currently displayed or highlighted
picture to the OnlineAlbum.
䢇Erase—Erase the currently displayed or highlighted picture,
provided it is unlocked.
䢇Erase All—Erase all of the unlocked pictures in the Picture
Gallery. Locked pictures must be unlocked before you can
erase them.
䢇Picture Info—View the Title, time and date created, size, and
quality of the currently highlighted or displayed picture.
5. Use the navigation keys to highlight the desired option.
Press the key to perform the function for the option
or enter its sub menu.
Section 11: Camera 143
Taking Videos
Section 11
Switch From Expanded to Thumbnail Mode
1. While viewing pictures in the picture gallery, press the
Thumbnail (right) soft key ( ) to view several smaller
pictures at a time.
2. Once you’ve found a picture that you wish to view full
size, press the Expand (right) soft key ( ).
Taking Videos
Your phone is capable of recording short videos (with
sound) that are up to 12 seconds in length. Saved
videos are stored in the Video Gallery.
Note: Depending upon their size, you can store up to 2 videos in the Video
Gallery.
1. In standby mode, briefly press the camera key on the
right side of the phone. The following options appear in
the display:
䢇Take a Picture—Activates your phone’s camera and lets you
take individual photos and multiple photos (multi shots).
䢇Take a Video—Activates your phone’s camera and lets you
take short videos (movies).
䢇Picture Gallery—Lets you view and manage your saved
photos.
䢇Video Gallery—Lets you view and manage your saved
videos.
䢇Settings—Lets you enable or disable the flash and adjust the
camera’s picture resolution, picture quality, and more.
2. Use the navigation keys to highlight Take a Video, then
press the key.
144
Section 11
Note: You can also activate the camera in video mode by pressing the
Menu (left) soft key( ), then press (for Camera) and for Take a
Video.
3. Press the key again to begin recording video. The
status of the recording is indicated in percentage at the
bottom of the display.
4. To stop the recording before it reaches capacity, press
the Stop (right) soft key ( ). Otherwise, the recording
stops automatically when it reaches 100%, and the video
is saved to the Video Gallery.
The Video Gallery
Saved videos are stored in the Video Gallery. When
you open the Video Gallery, the current video and the
number of videos stored in the gallery are indicated
above the image that appears in the display.
1. In standby mode, briefly press the camera key on the
right side of the phone. A list of sub menus appear in the
display.
2. Use the navigation keys to highlight Video Gallery, then
press the key.
3. The first frame of the first saved video appears in the
display.
4. Browse other videos stored in the Video Gallery (if any),
using the left/right navigation keys.
Section 11: Camera 145
Camera Settings
Section 11
5. When the desired video appears in the display, press the
Play (right) soft key ( ) to play the video or press the
Option (left) soft key ( ). The following options appear
in the display:
䢇Assign—Assign a video as wallpaper, or as an opening or
closing animation.
䢇Rename—Rename a video.
䢇Lock/Unlock—Lock a video so that it cannot be erased.
Unlock a video so that it can be erased.
䢇Erase—Erase an unlocked video.
䢇Erase All—Erase all unlocked videos in the video gallery.
䢇Video Info—View the title, when created, size, and quality of
the video.
6. Use the navigation keys to highlight the option of your
choice.
7. Press the key to perform the highlighted option’s
function or to enter its sub menu.
Camera Settings
The Camera Settings options let you select the default
flash, resolution, and picture quality settings the
camera will apply to your pictures.
Note: When settings are defined in the Camera menu, the settings are
permanently saved. However, when settings are defined while the phone
is in camera mode (preparing to take a picture), they are only active for the
current camera session.
146
Section 11
Flash
Flash enables you to take pictures in low light. The
flash is located on the outside of the folder, beside the
camera.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Camera), (for Settings), and
for Flash. Off and On appear in the display.
2. Use the navigation keys to highlight Off or On, then press
the key. You’re returned to the Settings menu.
Note: When the flash is set to On, the flash icon ( ) appears in the
display in camera mode.
Change Picture Resolution
Change the size (in bytes) of your pictures using the
Resolution setting. Options are High, Medium, and
Low.
Note: With Fun Frames enabled, the camera only takes pictures in Low
Resolution mode (regardless of resolution setting).
Tip: Change a photo’s resolution for the current camera session (only)
using the Up and Down navigation keys while in camera mode.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Camera), (for Settings), and
for Resolution. The following options appear in the
display:
䢇High (VGA 640 X 480)
䢇Medium (QVGA 320 X 240)
䢇Low (QQVGA 160 X 120)
Section 11: Camera 147
Camera Settings
Section 11
2. Use the navigation keys to highlight the desired
resolution and press the key. You’re returned to the
Settings menu.
Note: The resolution setting affects zoom capabilities. When resolution is
set to High, only X1 zoom is available. When resolution is set to Medium,
X1 and X2 are available. When resolution is set to Low, X1, X2, and X4
zoom settings are available.
Border Pictures with Fun Frames
Add your own touch to pictures using Fun Frames.
Each of the ten available settings border and crop
pictures to lend a different theme to your images.
Note: With Fun Frames enabled, the camera will only take pictures in Low
resolution mode (regardless of the resolution setting in the camera Settings
sub menu).
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Camera), (for Settings), and
for Fun Frames.
2. Use the navigation keys to highlight one of the following
fun frames.
䢇Normal
䢇Dream
䢇Flower01
䢇Flower02
䢇Grape
䢇Frame
䢇Theater
䢇Mask
䢇Muscle
148
Section 11
䢇Star
䢇Wood
Note: Choose Normal to disable Fun Frames.
3. Once the Fun Frame of your choice is highlighted, press
. You’re returned to the Settings menu.
4. Now, any pictures you take adopt the theme of the fun
frame that you’ve selected.
Be Creative with Color Tones
Change the look of your pictures with Color Tones.
Choose from five available settings such as Emboss,
Negative, and Sepia. The selected color tone previews
in the display before you take the picture.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Camera), (for Settings), and
for Color Tones.
2. Use the navigation keys to highlight one of the following
color tones:
Note: Choose Normal to disable Color Tones.
䢇Normal—Subjects and pictures appear with a normal hue.
䢇Sepia—Subjects and pictures appear in a brownish-gray hue.
䢇Monochrome—Subjects and pictures appear in black and
white.
䢇Negative—Subjects and pictures appear with light and dark
colors inverted.
䢇Emboss—Subjects and pictures appear with a raised,
ornamental look.
䢇Sketch—Subjects and pictures appear as sketched artwork.
Section 11: Camera 149
Camera Settings
Section 11
3. Once the color tone of your choice is highlighted, press
the key. You’re returned to the Settings menu.
When you take your next picture, the phone’s display
previews your subject image with the selected color
tone.
Use Shutter Sound
Choose from five different sounds whenever you take a
picture. Aside from being a cool sound effect, Shutter
Sound acts as an audible reminder that your camera
has taken the picture.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Camera), (for Settings), and
for Shutter Sound.
2. Use the navigation keys to highlight one of the following
shutter sounds. Each sound plays as it is highlighted.
䢇Sound 1
䢇Sound 2
䢇Sound 3
䢇Sound 4
䢇Sound 5
3. Once your choice is highlighted, press the key.
You’re returned to the Settings menu.
150
Section 11
The Quality Setting
You can affect how much your photo is compressed,
thereby reducing it’s overall size (not to be confused
with resolution).
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Camera), (for Settings), and
for Quality.
2. Use the navigation keys to highlight Fine, Normal, or
Economy.
3. Once the quality setting of your choice is highlighted,
press the key. You’re returned to the Settings
menu.
Zoom in on a Subject
Your camera has digital zoom capabilities of up to x4 in
Low resolution mode (x2 in Medium). Pictures may
appear somewhat grainy as you zoom in; this is a
normal result of digital enhancement.
1. In camera mode, press the navigation left/right keys to
zoom in and out on your subject.
2. Press the key or the camera key ( ) to take the
picture.
Note: The Zoom setting is affected by the Resolution setting (Menu ,
, ). When Resolution is set to High, only X1 zoom is available.
When Resolution is set to Medium, X1 and X2 are available. When
Resolution is set to Low, X1, X2, and X4 zoom settings are available.
Section 11: Camera 151
Camera Settings
Section 11
Set Brightness
Underexpose or overexpose pictures using the eleven
brightness settings built in to your camera. The
brightness control is handy for adjusting to conditions
beyond range of the auto brightness feature.
1. In camera mode, press the Option (left) soft key ( ). A
pop-up menu appears in the display containing the
following options:
䢇Flash
䢇Self Timer
䢇Multi Shot
䢇Brightness
䢇Fun Frame
䢇Color Tones
2. Use the navigation keys to highlight Brightness, then
press the key.
3. Use the navigation keys to set the desired brightness
level, then press the key. The brightness level is
indicated in the top portion of the display and ranges
from -5 to +5.
152
Section 11
Point, Click, and Send a Picture
Take a picture and send it to anyone with a compatible
device in a few easy steps.
Tip: You can send a Picture message to up to ten recipients. Separate each
recipient’s address or phone number with a comma in the Send to field of
the Picture message composer.
1. In standby mode, press and hold the camera key ( ) to
activate the camera.
2. Using the display as a viewfinder, take the desired
picture by pressing the camera key ( ) or the
key.
3. Press the key to display the Picture message
composer.
4. Enter the recipient’s phone number or e-mail address
using the keypad.
5. Press the key to send the Picture message to the
intended recipients.
Section 12
Section 12: Tools 153
Section 12: Tools
Topics Covered
•Voice Kit
• Today
• Scheduler
• Jump To Date
•To Do List
•Memo Pad
• Count Down
•Alarm Clock
•World Time
•Calculator
This section explains how you can use your phone’s
Personal Information Manager (PIM) functions to view
today’s calendar, schedule appointments, create To-Do
lists, set an alarm, perform simple math calculations,
and more.
Section 12
154
Voice Kit
The voice recognition capabilities of the SCH-a670 are
exceptional due to advanced, speaker-independent
technology. This means there is usually no need to
“train” your phone to understand your voice.
Quick Dial Settings
Quick Dial lets you dial a person by saying the name
you’ve recorded for that person. Before you can use
Quick Dial, you’ll need to record the names you wish to
use.
Tips for Recording Quick Dial Names
• Record names in a quiet area.
• Choose a name that is not too long or short.
• Speak clearly and distinctly when you record.
• Avoid recording names that sound alike.
Record a Name or Phrase for Quick Dial
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Tools), (for Voice Kit), for
Quick Dial, and for Record.
The phone prompts, “Please say the name.”
2. Wait for the beep and then say the name.
The phone plays back the name, and then prompts,
“Please enter the phone number with your keypad
and then press OK.”
3. Use the keypad to enter the phone number that you want
associated with this name [press the Options (left) soft
key ( ) to add dialing pauses, if the number requires].
Section 12: Tools 155
Voice Kit
Section 12
4. When finished, press .
The phone prompts, “Enter name.”
5. Enter the name via the keypad, then press .
Use Quick Dial
See “Use Quick Dial” on page 49 for more information.
Review Your Quick Dial List
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Tools), (for Voice Kit), for
Quick Dial, and for Review. A list of recorded
names appears in the display.
2. Use the navigation keys to highlight a name to display
more information, such as the name and its associated
number.
Erase a Quick Dial Name
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Tools), (for Voice Kit), for
Quick Dial, and for Erase all. You are prompted to
confirm the erasure.
2. Use the navigation keys to highlight Yes, then press
. The name is erased.
Section 12
156
Voice Memo Management
You can use your phone to record voice memos for later
playback. You can also record the caller on the other
end of the line during a phone conversation.
Note: There is limited space for the number and length of recordings.
• The maximum number of voice memos is 10.
• The maximum length for a single voice memo is 60 seconds.
Record a Voice Memo
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Tools), (for Voice Kit), for
Voice Memo, and for Record. The phone prompts,
“Please record after the beep.”
Tip: In standby mode, press and hold until the phone prompts,
“Please say a command.” Say “Voice Memo” into the microphone
to launch Voice Memo.
2. Wait for the beep, then start speaking. As it is recording
the phone displays a countdown timer that shows the
seconds remaining for the recording.
䢇To pause the memo, press the Pause (left) soft key ( ). When
a memo is paused, select Resume to resume recording.
3. Press the Stop (right) soft key ( ) once you’re finished
recording. The following options appear in the display:
䢇Review—Replay the voice memo that you just recorded.
䢇Rerecord—Record over the voice memo that you just
recorded.
䢇Save—Save the voice memo that you just recorded.
䢇Quit—Exit to the previous (Voice Memo) menu.
Section 12: Tools 157
Voice Kit
Section 12
4. Use the navigation keys to highlight an option. Press
to perform the function for that option.
5. To save the voice memo, select Save from the pop-up
menu, then press .
6. Enter a name for the voice memo using the keypad.
7. Press to save the voice memo.
Review and Erase Voice Memos
If you’ve saved any voice memos, you can review them
anytime.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Tools), (for Voice Kit), for
Voice Memo, and for Review. A list of saved voice
memos appears in the display.
2. Use the navigation keys to highlight the voice memo you
wish to review, and press . Information about the
voice memo appears in the display.
3. Press the Play (right) soft key ( ) to play the voice
memo.
4. Press the Option (left) soft key ( ) to Play, Edit, or
Erase the voice memo.
Erase All Voice Memos at One Time
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Tools), (for Voice Kit), for
Voice Memo, and for Erase All. “Erase all Voice
Memos?” appears in the display.
2. Use the navigation keys to highlight Yes (to erase all
memos) or No (to return to the previous menu).
3. Press to confirm your selection.
Section 12
158
Set Active
To set the key or action that launches your phone’s Voice
Command feature, follow these steps.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Tools), (for Voice Kit), for
Voice Setup, and for Set Active. The following
options appear in the display:
䢇[*] Only—Press and hold the key to launch Voice
Command.
䢇[*]/Folder—Press and hold the key or open the folder to
launch Voice Command.
䢇[*]/EarMic—Press and hold the key or attach an
Earphone/Microphone accessory to launch Voice Command.
2. Use the navigation keys to highlight the option you want,
then press to save and exit.
Note: Your phone is initially set to [*] Only, so that when you press and
hold the key, Voice Command is activated. If you select one of the
other options, that is [*]/Folder or [*]/EarMic, your phone will launch
Voice Command when you open the folder or when you attach the optional
earphone/microphone headset to your phone, as well as when you press
and hold the key.
Digit Dial Settings
Digit Dial lets you dial any valid seven-digit or ten-
digit phone number by speaking the number naturally,
without pausing between digits.
Section 12: Tools 159
Voice Kit
Section 12
Digit Dial Tips
• Digit Dial works best in quieter environments.
• When pronouncing a number, speak at a normal speed, saying
each digit clearly. There is no need to pause between digits.
• The phone recognizes the digits one, two, three, four, five, six,
seven, eight, nine, zero, and oh (zero). It doesn’t recognize
numbers such as “one eight hundred” for “1-800.” Instead,
say “one eight zero zero,” or “one eight oh oh.”
• The phone recognizes only valid seven or ten-digit North
American phone numbers, optionally preceded by the digit “1.”
• If you are experiencing frequent problems getting Digit Dial to
recognize you, try adapting it to your voice, which can greatly
improve accuracy. See the following section on Digit Dial
Adaptation for more information.
Use Digit Dial
See “Use Digit Dial” on page 47 for more information.
Digit Dial Adaptation
Digit Dial works well for most people without special
adaptation. However, people with strong accents or
unique voice characteristics may obtain better results
by adapting the system to better match their voices.
Note: You should adapt Digit Dial only if the system is frequently not
recognizing your speech. After you adapt Digit Dial, your phone is
customized to your voice, and your voice only. Others will not be able to
use it unless they reset the phone to factory defaults.
Adaptation involves recording several digit sequences
to adapt the system to the unique properties of your
voice. The adaptation process takes about three
minutes.
Section 12
160
Tips for Adapting Digit Dial
• Adapt digits in a quiet place.
• Make sure you wait for the beep before starting to speak.
• Speak clearly, and say each digit distinctly.
• If you make a mistake while recording a sequence of digits, or if
there is an unexpected noise that spoils the recording, re-
record that sequence.
Adapt Digit Dial to your Voice
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Tools), (for Voice Kit), for
Voice Setup, (for Set Digits), and for Adapt
Digits.
Your phone displays the first digit sequence and “Please
say” plays through the speaker followed by the four
digits appearing in the display.
2. Wait for the beep and repeat the digits using your normal
tone of voice.
3. After a moment, the phone plays back the recording and
prompts, “Did the recording sound ok?” If the
recording was good, say “Yes”. If you need to re-record,
say “No”.
䢇If you say “No”, the phone prompts you to pronounce the digits
again. Wait for the beep and then re-record. Repeat this step
until you’re satisfied with the recording.
4. After confirming that the recording sounds ok, repeat the
recording process with the next set of digits. After six
sets of digits, the phone asks whether you want to do
more adaptation. Answer “Yes”.
Section 12: Tools 161
Today
Section 12
5. Repeat steps 4-6 for another six sets of digits. After the
sixth set of digits, the phone indicates adaptation is
complete.
Reset Digit Dial Adaptation
You can reset Digit Dial to its original state.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Tools), (for Voice Kit), for
Voice Setup, (for Set Digits), and for Reset
Digits.
You are prompted to confirm the Adapt Digit Data
erasure.
2. Use the navigation keys to select Yes, to erase the Adapt
Digit Data, or No, to retain the Adapt Digit Data.
3. Press .
Today
Schedule up to nine events for the current day by
indicating each event’s start and end time. Set alarms
for events so that you can be alerted before an event
takes place. Events scheduled for future dates
automatically appear on your Today events schedule
for the present day.
Add a New Event
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Tools) and for Today. One of
the following screens appears in the display:
䢇The New Event screen.
Or
䢇The Event screen, showing events scheduled for today.
Section 12
162
2. If the Event screen appears, press the Option (left) soft
key ( ) and press for Add new. The New Event
screen appears in the display.
3. In the New Event screen, enter details of the new event
using the keypad, then press the Option (left) soft key
( ). A pop-up menu containing the following text entry
mode options appears in the display:
䢇T9 Word
䢇ABC
䢇Symbol
䢇123
Note: The current mode of text entry is indicated in the lower right corner
of the display.
4. Use the navigation keys to highlight the entry mode that
you wish to use, or press to exit the pop-up menu.
Note: See “Section 5: Entering Text” on page 63 for more information
about entering text.
5. When you’re finished entering details for the event, press
. You’re prompted to enter the time and date.
6. Enter the time and date for the event using the keypad.
䢇Press for A.M when P is highlighted.
䢇Press for P.M when A is highlighted.
7. When you’re finished entering the time and date, use the
navigation keys to highlight Notification.
8. Use the Left and Right navigation keys to select the
amount of time that you wish to be notified by an alert
before the event occurs.
Section 12: Tools 163
Scheduler
Section 12
9. Press to store the event in your calendar. An alert
will notify you prior to the event, if notification alert is
set.
Scheduler
Scheduler allows you to view the current, past, or
future month in calendar format. While viewing the
calendar, the current date is highlighted, and days with
scheduled events are surrounded by a box.
View an Event
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Tools) and for Scheduler.
2. A calendar appears in the display with the current date
highlighted. The month and year appear in the upper
right of the display.
3. Use the Up, Down, Left, and Right navigation keys to
highlight different dates within the current month.
䢇Press to open a date that is highlighted.
䢇Press the volume up key to view previous months.
䢇Press the volume down key to view future months.
4. Press the Option (left) soft key ( ). The following
options appear in the display:
䢇View—View events for the date surrounded by a box.
䢇Add new—Add a new event for the date.
5. Use the navigation keys to highlight an option. Press
to enter the highlighted option’s sub menu.
Section 12
164
Jump To Date
Go directly to any date that you specify in the Jump to
Date entry screen.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Tools) and for Jump to Date.
The Jump to Date entry screen appears in the display.
2. Enter the desired Jump to date, then press . The
calendar month for the date you specified appears in the
display, with the date that you entered highlighted.
To Do List
The To Do List allows you to create a task list. You can
store, prioritize and manage up to twenty To Do List
tasks.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Tools) and for To Do List. The
Add To Do screen appears in the display.
2. Enter details of the task using the keypad. Press the
Option (left) soft key ( ) to display a pop-up menu
containing the following text entry mode options.
䢇T9 Word
䢇ABC
䢇Symbol
䢇123
Note: The current mode of text entry is indicated in the lower right corner
of the display.
Section 12: Tools 165
To Do List
Section 12
3. Use the navigation keys to highlight the entry mode that
you wish to use, or press to exit the pop-up menu.
Note: See “Section 5: Entering Text” on page 63 for more information
about entering text.
4. When you’re finished entering details for the task, press
. You’re prompted to select a priority for the task.
5. Use the Left and Right navigation keys to select High or
Low.
6. Press the Down navigation key to highlight Enter Date.
7. Enter a time and date for the task using the keypad.
䢇Press for A.M when P is highlighted.
䢇Press for P.M when A is highlighted.
8. Press to store the task.
Add, Edit, and Erase To-Do List Tasks
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Tools) and for To Do List.
2. Use the Left and Right navigation keys to browse tasks
in your To Do List. Events are presented in order of
priority.
Section 12
166
3. Press the Option (left) soft key ( ) while viewing your
To Do List. The following options appear in the display:
䢇Add new—Add a new task to the To Do List.
䢇Edit—Edit the task currently appearing in the display.
䢇Erase—Erase the task currently appearing in the display.
䢇Erase All—Erase all tasks from your To Do List.
4. Use the navigation keys to highlight an option.
5. Press to perform the function for the highlighted
option.
Memo Pad
Create notes and store them in Memo Pad. Notes that
you create in Memo Pad can’t be prioritized or assigned
an alert. Return to Memo Pad anytime to review and
edit your notes.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Tools) and for Memo Pad.
2. If you have any stored memos, they appear as a list in
the display. If this is your first time in Memo Pad, you’re
prompted to add a new memo.
3. Enter a memo using the keypad.
4. Press the Option (left) soft key ( ) to display a pop-up
menu containing the following text entry mode options.
䢇T9 Word
䢇ABC
䢇Symbol
䢇123
Section 12: Tools 167
Memo Pad
Section 12
Note: The current mode of text entry is indicated in the lower right corner
of the display.
5. Use the navigation keys to highlight the entry mode that
you wish to use, or press to exit the pop-up menu.
Note: See “Section 5: Entering Text” on page 63 for more information
about entering text.
6. When you’re finished entering details for the memo,
press . The memo is stored.
Review, Add, Edit, and Erase Memos
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Tools) and for Memo Pad. Your
list of stored memos appears in the display.
2. Use the navigation keys to browse memos. Press to
open a highlighted memo.
3. Press the Option (left) soft key ( ) while viewing your
memos.
䢇Add new—Add a new memo to Memo Pad.
䢇Edit—Edit the memo currently highlighted or appearing in the
display.
䢇Erase—Erase the memo currently highlighted or appearing in
the display.
䢇Erase All—Erase all memos from Memo Pad.
4. Use the navigation keys to highlight an option.
5. Press to perform the function for the highlighted
option.
Section 12
168
Count Down
Count Down allows you to view the amount of time
between the current date and any event that you wish
to schedule. You can create up to twenty Count Down
events.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Tools) and for Count Down.
Note: If you have any stored Count Down timers, the first timer appears in
the display. If you have more than one, the event scheduled closest to
today’s date appears first. Use the navigation keys to browse between
multiple timers.
2. Enter details for the Count Down event using the keypad.
3. Press the Option (left) soft key ( ) to display a pop-up
menu containing the following text entry mode options.
䢇T9 Word
䢇ABC
䢇Symbol
䢇123
4. Use the navigation keys to highlight the entry mode that
you wish to use, or press to exit the pop-up menu.
5. Once you’ve finished entering details for the Count Down
event, press . You’re prompted to enter a time and
date for the scheduled event.
6. Enter the time and date using the keypad and navigation
keys.
䢇Press for A.M when P is highlighted.
䢇Press for P.M when A is highlighted.
7. Press to store the event.
Section 12: Tools 169
Count Down
Section 12
Review, Add, Edit, and Erase Count Down Events
Review scheduled Count Down events to determine
how much time remains between the current time/
date and any event that you’ve scheduled. You can also
add another event, or edit and erase previously
scheduled events.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Tools) and for Count Down.
2. Any stored Count Down events appear in the display. The
event scheduled closest to the current date appears first
in the display.
Event details of the scheduled event appear in the
display. The day, date, and time of the scheduled event
appear in the bottom of the display.
3. Press the Option (left) soft key ( ) while viewing your
memos. The following options appear in the display:
䢇Add new—Add a new event to Count Down.
䢇Edit—Edit the event currently appearing in the display.
䢇Erase—Erase the event currently appearing in the display.
䢇Erase All—Erase all scheduled events from Count Down.
4. Use the navigation keys to highlight an option. Press
to perform the function for the highlighted option.
Section 12
170
Alarm Clock
Your phone has an alarm clock that can be set to go off
once, or recur daily at a specific time. Once set, the
alarm clock is easy to change or turn off completely.
Note: The alarm doesn’t function when the phone is turned off. If the time
for an alarm that was set for Once has elapsed while the phone is off, the
alarm occurs at the specified time on the next day.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Tools) and for Alarm Clock.
The following options appear in the display:
䢇Once
䢇Daily
䢇Off
2. Use the navigation keys to highlight the frequency for
which you wish the alarm to occur, then press .
3. Enter the time for the alarm using the keypad.
䢇Press for A.M when P is highlighted.
䢇Press for P.M when A is highlighted.
4. Press when you’re finished entering the time for the
alarm. The alarm is set and the alarm icon ( ) appears
in the top of the display.
Section 12: Tools 171
Alarm Clock
Section 12
When an Alarm Sounds
An animated alarm clock appears in the display and an
alert sounds when the specified time for the alarm
arrives.
• Press to silence the alarm.
• If the alarm was set as a Daily alarm, the alarm icon remains in
the top of the display.
• If the alarm was set as a Once only alarm, the alarm icon
disappears from the top of the display.
Turn Off the Alarm
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Tools) and for Alarm Clock.
The following options appear in the display:
䢇Once
䢇Daily
䢇Off
2. Use the navigation keys to highlight Off, then press .
All alarms are turned off.
Section 12
172
World Time
World Time allows you to view the time of day or night
in another part of the world. World Time displays time
in the 24 different time zones around the world.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Tools) and for World Time. A
world map appears in the display.
2. Use the Left and Right navigation keys to browse cities
and their current times. The following cities are
supported.
Enable Daylight Savings Time (DST)
1. While viewing the World Time map, press the Option
(left) soft key ( ). Off and On appear in the display.
2. Use the navigation keys to highlight On, then press .
Daylight Savings Time is enabled.
Alaska San Francisco Denver/Arizona
Chicago/Mexico New York Caracas
Brasilia Mid Atlantic Cape Verde
London Paris/Berlin Athens/Helsinki
Moscow Abu Dhabi Tashkent
Alma-ata Bangkok/Jakarta Hongkong/Beijing
Seoul/Tokyo Guam/Sydney Okhotsk
Wellington Samoa/Midway Honolulu, Hawaii
Section 12: Tools 173
Calculator
Section 12
Calculator
You can perform calculations, including addition,
subtraction, multiplication and division using your
phone.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Tools) and for Calculator. The
Calculator appears in the display.
2. Enter the first number in your equation using the keypad.
(Numbers can be up to nine digits long.)
䢇Press to enter a decimal point.
䢇Press to change the sign for a number to a negative.
3. Use the navigation keys to set the type of calculation that
you wish to perform. Your choices are as follows.
䢇[ + ] Addition
䢇[ x ] Multiplication
䢇[ - ] Subtraction
䢇[ ÷ ] Division
4. Use the keypad to enter the second number into your
equation.
5. Press to perform the calculation and view the
result.
Section 12
174
Section 13: Changing Your Settings 175
Section 13
Section 13: Changing Your Settings
Topics Covered
• Location Setting
• Network Settings
• Security Settings
•Call Options
• Shortcut Setting
• Language Setting
•Clock Set
• Version Information
This section explains how to configure your phone’s
language, network preferences, security options, and
other settings.
176
Section 13
Location Setting
You can set your phone to pass Global Positioning
System (GPS) data to identify your location to the
network continually or only when you make an
emergency (911) call.
Note: Check with your wireless carrier to determine if/when/where
location-based services are available.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Setup) and for Location. The
following Location options appear in the display:
䢇Location On—Your location data is continually sent wherever
the feature is available.
䢇911 Only—Your location data is sent only when you dial 911.
2. Use the navigation keys to highlight an option.
3. Press to select the function. The Setup menu
appears in your display.
4. Press to return to standby mode.
Network Settings
The Network sub menu allows you to set your
preferred system. Contact your wireless carrier for
more information.
Section 13: Changing Your Settings 177
Network Settings
Section 13
Set NAM
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Setup), (for Network), and
for Set NAM. The following Set NAM options appear in
the display:
•NAM 1—Your service contract has one phone line.
•NAM 2—Your service contract has two phone lines.
2. Use the navigation keys and to highlight NAM 1 or NAM
2, the press to save your selection.
The idle screen appears in the display.
Roam Option
The Roam Option feature enables you to automatically
or manually select the network used when roaming
outside of your home area.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Setup), (for Network), and
for Roam Option. The following roaming options
appear in the display:
•Home only—Roaming is off. If your home system is not
available then your call will not be connected, and the no
service icon ( ) appears in the display. In some service
areas, an operator may come on-line and ask you how you
would prefer to pay for the call.
•Automatic-A—Roaming is on. This setting seeks an analog
or digital service automatically. It searches for an alternative
system.
•Automatic-B—Roaming is on. This is your default setting. It
will always try your calls using the Preferred Roaming List (PRL)
loaded into your phone. If a preferred service is not found, then
this option will attempt to acquire any digital or analog service.
178
Section 13
2. Use the navigation keys and to highlight the desired
Roam option, the press to save your selection.
The Network menu appears in the display.
Security Settings
Use the Security sub menu to lock your phone, set up
emergency numbers, enable or disable voice privacy,
set restrictions, and other security options.
Lock Phone
Locking the phone blocks all outgoing calls except
those to 911 and to the three user-programmed
emergency numbers. You can lock the phone manually,
or set the phone to lock automatically when turned on.
In Lock mode, you can answer calls, but you must
unlock the phone to place calls (except to emergency
and secret numbers).
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Setup) and for Security.
The Lock prompt appears in the display.
2. Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone
number.
The Lock prompt disappears and the Security menu
appears in the display.
Section 13: Changing Your Settings 179
Security Settings
Section 13
3. Press for Lock Phone. The following options appear
in the display:
䢇Never—The phone remains unlocked.
䢇On power up—The phone locks automatically the next time
your phone is powered on and stays locked until you enter the
lock code.
䢇Now—The phone locks immediately and stays locked until
you enter the lock code.
4. Use the navigation keys to highlight the Lock Phone
option of your choice.
5. Press to perform the function for the highlighted
option.
Important! If you change the NAM1 setting after setting the phone to lock
upon power-up and did not program a number into NAM2, you won’t be
able to access your phone. You must call the Service Center to unlock your
phone.
Change Lock
The default lock code is generally the last four digits of
your phone number. It is advisable to change the
default lock code to a secret code for security purposes.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Setup) and for Security.
The Lock prompt appears in the display.
2. Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone
number.
The Lock prompt disappears and the Security menu
appears in the display.
180
Section 13
3. Press for Change Lock. You’re prompted to enter
the new lock code.
4. Enter the new lock code. You’re prompted to re-enter the
new lock code for verification.
5. Enter the new lock code again. Your changes are stored.
Note: Your phone does not allow you to view the lock code for obvious
security reasons. If you change the lock code, be sure to write down or
memorize the new code.
Emergency #
You have the option of storing up to three emergency
numbers to your phone. Each number can be up to 32
digits in length. All emergency numbers can be dialed
any time, even when your phone is locked or restricted.
Note: Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked or restricted. If you
call 911 an audible tone is heard and an Emergency prompt appears in the
display for the duration of the call.
Important! Because of various transmission methods, network
parameters, and user settings used to complete a call from your wireless
phone, a connection cannot always be guaranteed. Therefore, emergency
calling may not be available on all wireless networks at all times.
Important! DO NOT depend on this phone as a primary method of calling
911 or for essential or emergency calls.
Remember to always turn your phone on and check for
adequate signal strength before placing a call.
Section 13: Changing Your Settings 181
Security Settings
Section 13
Store Emergency Numbers
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Setup) and for Security.
The Lock prompt appears in the display.
2. Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone
number.
The Lock prompt disappears and the Security menu
appears in the display.
3. Press for Emergency #.
4. Press , , or to select from the three entry
openings.
5. Enter the emergency number (up to 32 digits in length).
6. Press to save the number that you entered.
7. Press to exit and return to the previous menu.
Call Emergency Numbers in Lock Mode
1. In standby mode, enter the emergency number via the
keypad.
2. Press to place the call.
Voice Privacy
Voice Privacy allows you to prevent those you call from
seeing your number in their display when receiving
your call.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Setup) and for Security.
The Lock prompt appears in the display.
182
Section 13
2. Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone
number.
The Lock prompt disappears and the Security menu
appears in the display.
3. Press for Voice Privacy. The following options
appear in the display:
䢇Standard—Voice privacy is disabled.
䢇Enhanced—Voice privacy is enabled.
4. Use the navigation keys to highlight the Voice Privacy
option of your choice, then press .
Restriction
Restriction allows you to restrict outgoing calls,
incoming calls, and all access to your Contacts.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Setup) and for Security.
The Lock prompt appears in the display.
2. Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone
number.
The Lock prompt disappears and the Security menu
appears in the display.
Section 13: Changing Your Settings 183
Security Settings
Section 13
3. Press for Restriction. The following options appear
in the display:
•Outgoing: When set to Yes, outgoing calls are restricted.
•Incoming: When set to Yes, incoming calls are restricted.
•Contacts: When set to Yes, all access to your Contacts List
is restricted (including speed dialing).
Note: The default restriction settings are all No.
4. Use the navigation keys to highlight the Restriction you
want, then press . The following options appear in
the display:
•No—Unrestricted
•Yes—Restricted
5. Use the navigation keys to highlight Yes or No, then
press .
Erase Memory
Erase memory erases your Contacts and Voice Dial
recordings. This feature is useful if you want to give
your phone to a friend or family member.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Setup) and for Security.
The Lock prompt appears in the display.
2. Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone
number.
The Lock prompt disappears and the Security menu
appears in the display.
184
Section 13
3. Press for Erase Memory. A confirmation prompt
appears in the display.
4. Use the navigation keys to highlight Yes or No, then
press . A confirmation message appears in the
display while your messages are being erased. Your
phone then returns to the Security menu.
Reset Phone
Reset Phone returns all setup options to their factory
default.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Setup) and for Security.
The Lock prompt appears in the display.
2. Enter the four-digit lock code using the keypad.
Note: The default lock code is the last four digits of your mobile phone
number.
The Lock prompt disappears and the Security menu
appears in the display.
3. Press for Reset Phone. A prompt appears in the
display to restore default settings (except for Contacts
and Voice Dial).
4. Use the navigation keys to highlight Yes or No, then
press .
Section 13: Changing Your Settings 185
Call Options
Section 13
Call Options
The Call Options sub menu lets you set call options
such as Auto Retry, Data rates for data calls, and more.
Auto Retry
Auto Retry automatically re-dials a number if there is
no answer or the dialed party is busy. Depending upon
your location, the number of times your phone redials
a number may vary.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Setup), (for Call Options), and
for Auto Retry. The following options appear in the
display:
䢇Off
䢇Every 10 sec
䢇Every 30 sec
䢇Every 60 sec
2. Use the navigation keys to highlight the desired setting,
then press .
186
Section 13
Data
Use the Data sub menu to set your phone to detect data
connections automatically and to set the speed at which
data is transmitted (baud rate).
1. In standby mode, press the left soft key ( ), then press
(for Setup), (for Call Options), and for
Data. The following options appear in the display:
䢇Auto Detect—Set data auto detect capabilities. Options are:
data off, data for next call, and data until powered off.
䢇Baud Rate—Set the baud rate for data connections. Options
are: Auto, 19200, 38400, 57600, 115200, and 230400.
2. Use the navigation keys to highlight Auto Detect or
Baud Rate, then press . The selected sub menu
options appear in the display.
3. Use the navigation keys to highlight the desired Auto
Detect or Baud Rate setting, then press .
Call Answer
You can select a specific answer mode when you
receive an incoming call. Your phone can be preset to
answer when you do any of the following:
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Setup), (for Call Options), and
for Call Answer. The following Call Answer sub
menus appear in the display:
䢇Send Key—Press to answer an incoming call.
䢇Folder Open—Open the folder to answer an incoming call.
䢇Any Key—Press any key except to answer an incoming
call.
Section 13: Changing Your Settings 187
Call Options
Section 13
2. Use the navigation keys to highlight the method you wish
to use for answering calls, then press .
Auto Answer
Auto Answer enables your phone to automatically
answer calls after a period of time that you specify.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Setup), (for Call Options), and
for Auto Answer. The following options appear in
the display:
䢇Off
䢇After 5 sec
䢇After 3 sec
䢇After 1 sec
2. Use the navigation keys to highlight the desired setting,
then press .
TTY Mode
Your phone is fully Teletypewriter (TTY)/
Telecommunication Device for the Deaf (TDD)
compatible. You connect TTY/TDD equipment to the
headset connector on the top of your phone, behind the
folder hinge. TTY Mode must be enabled (TTY Full
selected) before you can use your phone with TTY/
TDD equipment.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Setup), (for Call Options), and
for TTY Mode. The following options appear in the
display:
䢇TTY Full—Enabled.
䢇TTY Off—Disabled.
188
Section 13
Note: The TTY Mode option has no effect on the phone’s earpiece,
microphone, or speaker. When you select TTY Full, all currently enabled
sound functions remain enabled.
2. Use the navigation keys to highlight your selection and
press . You’re returned to the previous menu and the
TTY icon ( ) appears in the top of the display.
Shortcut Setting
The Up navigation key can be customized to launch
any one of numerous applications or functions from
standby mode. Use the Shortcut sub menu to choose
the application that you wish the navigation up key to
launch.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Setup) and for Shortcut. The
following functions appear in the display:
䢇Scheduler
䢇Voice Memo
䢇Animation
䢇Ringer Type
䢇Gallery
䢇Alarm
䢇Calculator
䢇Memo Pad
2. Use the navigation keys to highlight the desired function,
then press .
You can now press the Up navigation key in standby
mode to launch the selected function.
Section 13: Changing Your Settings 189
Language Setting
Section 13
Language Setting
The language option changes the language of menus,
sub menus, and other user-interface features.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Setup) and for Language.The
following options appear in the display:
䢇English
䢇Spanish
2. Use the navigation keys to highlight your language
preference, then press .
Clock Set
Use the Clock Set option to set the current date and time.
Note: In digital service mode, the Main Clock feature is disabled. The
network adjusts time and date automatically.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Setup) and for Clock Set.
The Main Clock screen appears in the display.
2. Enter the current time and date using your keypad.
The hour, minute, month, and day must be entered using
two digits each. You must enter the hour in 12-hour
format and press for AM or press for PM.
The year must be entered with all four digits.
3. Press to save the time and date.
190
Section 13
Version Information
You can view the PRL (Preferred Roaming List),
software version, hardware version, and ERI (Extended
Roaming Indicator) on your phone. This feature is
helpful if you need to contact Customer Service.
1. In standby mode, press the Menu (left) soft key ( ),
then press (for Setup) and press for Version.
Hardware and software information for your phone
appears in the display.
2. Press to return to the Setup menu.
Section 14: Health and Safety Information 191
Section 14
Section 14: Health and Safety
Information
Topics Covered
• Health and Safety Information
This section outlines the safety precautions
associated with using your phone. These safety
precautions should be followed to safely use your
phone.
192
Section 14
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver.
It is designed and manufactured not to exceed the
exposure limits for radio frequency (RF) energy set by
the Federal Communications Commission (FCC) of the
U.S. government. These FCC exposure limits are
derived from the recommendations of two expert
organizations, the National Counsel on Radiation
Protection and Measurement (NCRP) and the Institute
of Electrical and Electronics Engineers (IEEE). In both
cases, the recommendations were developed by
scientific and engineering experts drawn from industry,
government, and academia after extensive reviews of
the scientific literature related to the biological effects of
RF energy.
The exposure limit set by the FCC for wireless mobile
phones employs a unit of measurement known as the
Specific Absorption Rate (SAR). The SAR is a measure
of the rate of absorption of RF energy by the human
body expressed in units of watts per kilogram (W/kg).
The FCC requires wireless phones to comply with a
safety limit of 1.6 watts per kilogram (1.6 W/kg). The
FCC exposure limit incorporates a substantial margin
of safety to give additional protection to the public and
to account for any variations in measurements.
SAR tests are conducted using standard operating
positions accepted by the FCC with the phone
transmitting at its highest certified power level in all
Section 14: Health and Safety Information 193
Health and Safety Information
Section 14
tested frequency bands. Although the SAR is
determined at the highest certified power level, the
actual SAR level of the phone while operating can be
well below the maximum value. This is because the
phone is designed to operate at multiple power levels
so as to use only the power required to reach the
network. In general, the closer you are to a wireless
base station antenna, the lower the power output.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in
positions and locations (e.g. at the ear and worn on the
body) as required by the FCC. Body-worn operations
are restricted to Samsung-supplied, approved, or non-
Samsung designated accessories that have no metal and
must provide at least 1.5 cm separation between the
device, including its antenna (whether extended or
retracted) and the user's body. Non-compliance with
the above restrictions may result in violation of FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for
this mobile phone with all reported SAR levels
evaluated as in compliance with the FCC RF exposure
guidelines. The maximum SAR values for this model
phone as reported to the FCC are:
• Head:1.38 W/Kg.
• Body-worn: 1.26 W/Kg.
194
Section 14
SAR information on this and other model phones can
be viewed on-line at www.fcc.gov/oet/fccid. To find
information that pertains to a particular model phone,
this site uses the phone FCC ID number which is
usually printed somewhere on the case of the phone.
Sometimes it may be necessary to remove the battery
pack to find the number. Once you have the FCC ID
number for a particular phone, follow the instructions
on the website and it should provide values for typical
or maximum SAR for a particular phone. Additional
product specific SAR information can also be obtained
at www.fcc.gov/cgb/sar.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has
published a series of Questions and Answers for
consumers relating to radio frequency (RF) exposure
from wireless phones. The FDA publication includes
the following information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held
wireless phones with built-in antennas, often called
"cell," "mobile," or "PCS" phones. These types of
wireless phones can expose the user to measurable
radio frequency energy (RF) because of the short
distance between the phone and the user's head. These
RF exposures are limited by Federal Communications
Commission safety guidelines that were developed
with the advice of FDA and other federal health and
safety agencies. When the phone is located at greater
distances from the user, the exposure to RF is
Section 14: Health and Safety Information 195
Consumer Information on Wireless Phones
Section 14
drastically lower because a person's RF exposure
decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a
base unit connected to the telephone wiring in a house,
typically operate at far lower power levels, and thus
produce RF exposures well within the FCC's
compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that
any health problems are associated with using wireless
phones. There is no proof, however, that wireless
phones are absolutely safe. Wireless phones emit low
levels of radio frequency energy (RF) in the microwave
range while being used. They also emit very low levels
of RF when in the stand-by mode. Whereas high levels
of RF can produce health effects (by heating tissue),
exposure to low level RF that does not produce heating
effects causes no known adverse health effects. Many
studies of low level RF exposures have not found any
biological effects. Some studies have suggested that
some biological effects may occur, but such findings
have not been confirmed by additional research. In
some cases, other researchers have had difficulty in
reproducing those studies, or in determining the
reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as wireless
phones before they can be sold, as it does with new
196
Section 14
drugs or medical devices. However, the agency has
authority to take action if wireless phones are shown to
emit radio frequency energy (RF) at a level that is
hazardous to the user. In such a case, FDA could
require the manufacturers of wireless phones to notify
users of the health hazard and to repair, replace or
recall the phones so that the hazard no longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:
• "Support needed research into possible biological effects of RF
of the type emitted by wireless phones;
• "Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device function;
and
• "Cooperate in providing users of wireless phones with the best
possible information on possible effects of wireless phone use
on human health.
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this
working group:
• "National Institute for Occupational Safety and Health
• "Environmental Protection Agency
• "Federal Communications Commission
• "Occupational Safety and Health Administration
• "National Telecommunications and Information Administration
Section 14: Health and Safety Information 197
Consumer Information on Wireless Phones
Section 14
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless
phones with the Federal Communications Commission
(FCC). All phones that are sold in the United States
must comply with FCC safety guidelines that limit RF
exposure. FCC relies on FDA and other health agencies
for safety questions about wireless phones.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from
these base stations are typically thousands of times
lower than those they can get from wireless phones.
Base stations are thus not the primary subject of the
safety questions discussed in this document.
What are the results of the research done already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of radio frequency energy (RF)
exposures characteristic of wireless phones have
yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies,
however, have suggested that low levels of RF could
accelerate the development of cancer in laboratory
animals. However, many of the studies that showed
increased tumor development used animals that had
been genetically engineered or treated with cancer-
causing chemicals so as to be pre-disposed to develop
cancer in absence of RF exposure. Other studies
198
Section 14
exposed the animals to RF for up to 22 hours per day.
These conditions are not similar to the conditions under
which people use wireless phones, so we don't know
with certainty what the results of such studies mean for
human health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use
of wireless phones and primary brain cancer, glioma,
meningioma, or acoustic neuroma, tumors of the brain
or salivary gland, leukemia, or other cancers. None of
the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
However, none of the studies can answer questions
about long-term exposures, since the average period of
phone use in these studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and
epidemiological studies of people actually using
wireless phones would provide some of the data that
are needed. Lifetime animal exposure studies could be
completed in a few years. However, very large
numbers of animals would be needed to provide
reliable proof of a cancer promoting effect if one exists.
Epidemiological studies can provide data that is
directly applicable to human populations, but ten or
more years' follow-up may be needed to provide
answers about some health effects, such as cancer. This
is because the interval between the time of exposure to
a cancer-causing agent and the time tumors develop - if
Section 14: Health and Safety Information 199
Consumer Information on Wireless Phones
Section 14
they do - may be many, many years. The interpretation
of epidemiological studies is hampered by difficulties
in measuring actual RF exposure during day-to-day use
of wireless phones. Many factors affect this
measurement, such as the angle at which the phone is
held, or which model of phone is used.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to radio frequency energy (RF).
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields
(EMF) Project since its inception in 1996. An influential
result of this work has been the development of a
detailed agenda of research needs that has driven the
establishment of new research programs around the
world. The Project has also helped develop a series of
public information documents on EMF issues.
FDA and Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative
Research and Development Agreement (CRADA) to do
research on wireless phone safety. FDA provides the
scientific oversight, obtaining input from experts in
government, industry, and academic organizations.
CTIA-funded research is conducted through contracts
to independent investigators. The initial research will
include both laboratory studies and studies of wireless
phone users. The CRADA will also include a broad
200
Section 14
assessment of additional research needs in the context
of the latest research developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point
we do not know that there is - it is probably very small.
But if you are concerned about avoiding even potential
risks, you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is
a key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless
phone will reduce RF exposure.
• "If you must conduct extended conversations by wireless phone
every day, you could place more distance between your body
and the source of the RF, since the exposure level drops off
dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or
use a wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that
wireless phones are harmful. But if you are concerned
about the RF exposure from these products, you can
use measures like those described above to reduce your
RF exposure from wireless phone use.
What about children using wireless phones?
The scientific evidence does not show a danger to users
of wireless phones, including children and teenagers. If
you want to take steps to lower exposure to radio
frequency energy (RF), the measures described above
would apply to children and teenagers using wireless
phones. Reducing the time of wireless phone use and
Section 14: Health and Safety Information 201
Consumer Information on Wireless Phones
Section 14
increasing the distance between the user and the RF
source will reduce RF exposure.
Some groups sponsored by other national governments
have advised that children be discouraged from using
wireless phones at all. For example, the government in
the United Kingdom distributed leaflets containing
such a recommendation in December 2000. They noted
that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their
recommendation to limit wireless phone use by
children was strictly precautionary; it was not based on
scientific evidence that any health hazard exists.
Do hands-free kits for wireless phones reduce risks from
exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free
kits can be used with wireless phones for convenience
and comfort. These systems reduce the absorption of
RF energy in the head because the phone, which is the
source of the RF emissions, will not be placed against
the head. On the other hand, if the phone is mounted
against the waist or other part of the body during use,
then that part of the body will absorb more RF energy.
Wireless phones marketed in the U.S. are required to
meet safety requirements regardless of whether they
are used against the head or against the body. Either
configuration should result in compliance with the
safety limit.
202
Section 14
Do wireless phone accessories that claim to shield the
head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that accessories that claim to shield the head
from those emissions reduce risks. Some products that
claim to shield the user from RF absorption use special
phone cases, while others involve nothing more than a
metallic accessory attached to the phone. Studies have
shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called
"shields" may interfere with proper operation of the
phone. The phone may be forced to boost its power to
compensate, leading to an increase in RF absorption. In
February 2002, the Federal trade Commission (FTC)
charged two companies that sold devices that claimed
to protect wireless phone users from radiation with
making false and unsubstantiated claims. According to
FTC, these defendants lacked a reasonable basis to
substantiate their claim.
What about wireless phone interference with medical
equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason,
FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless
telephones. This test method is now part of a standard
sponsored by the Association for the Advancement of
Medical instrumentation (AAMI). The final draft, a
joint effort by FDA, medical device manufacturers, and
Section 14: Health and Safety Information 203
Consumer Information on Wireless Phones
Section 14
many other groups, was completed in late 2000. This
standard will allow manufacturers to ensure that
cardiac pacemakers and defibrillators are safe from
wireless phone EMI. FDA has tested wireless phones
and helped develop a voluntary standard sponsored by
the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and
performance requirements for hearing aids and
wireless phones so that no interference occurs when a
person uses a compatible phone and a compatible
hearing aid at the same time. This standard was
approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones
for possible interactions with other medical devices.
Should harmful interference be found to occur, FDA
will conduct testing to assess the interference and work
to resolve the problem.
Additional information on the safety of RF exposures
from various sources can be obtained from the
following organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.slc.gov/SLTC/radiofrequencyradiation/
index.html
• National institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/emfpg.html
• World health Organization (WHO):
http://www.who.int/peh-emf/
204
Section 14
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.nrpb.org.uk
• Updated 4/3/2002: US food and Drug Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But
an important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such
as speed dial and redial. If available, these features help
you to place your call without taking your attention off
the road.
2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
3. Position your wireless phone within easy reach. Be able
to access your wireless phone without removing your
eyes from the road. If you get an incoming call at an
inconvenient time, let your voice mail answer it for you.
Section 14: Health and Safety Information 205
Road Safety
Section 14
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet, snow, ice and
even heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers while
driving. Jotting down a "to do" list or flipping through
your address book takes attention away from your
primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan calls when your car will be stationary.
If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then
continue.
7. Do not engage in stressful or emotional conversations
that may be distracting. Make people you are talking
with aware you are driving and suspend conversations
that have the potential to divert your attention from the
road.
8. Use your wireless phone to call for help. Dial 9-1-1 or
other local emergeny number in the case of fire, traffic
accident or medical emergencies. Remember, it is a
free call on your wireless phone!
9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1
or other local emergency number, as you would want
others to do for you.
206
Section 14
10.Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see
a broken-down vehicle posing no serious hazard, a
broken traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be stolen,
call roadside assistance or other special non-emergency
number.
"The wireless industry reminds you to use your phone safely
when driving."
For more information, please call 1-888-901-SAFE, or
visit our web-site www.wow-com.com
Provided by the Cellular Telecommunications &
Internet Association
Operating Environment
Remember to follow any special regulations in force in
any area and always switch your phone off whenever it
is forbidden to use it, or when it may cause interference
or danger. When connecting the phone or any accessory
to another device, read its user's guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation of
the equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating
position (held to your ear with the antenna pointing
over your shoulder).
Section 14: Health and Safety Information 207
Using Your Phone Near Other Electronic Devices
Section 14
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against the
RF signals from your wireless phone. Consult the
manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker.
These recommendations are consistent with the
independent research and recommendations of
Wireless Technology Research.
Persons with pacemakers:
• should always keep the phone more than 15 cm (6 inches)
from their pacemaker when the phone is switched on.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to minimize
potential interference.
If you have any reason to suspect that interference is
taking place, switch your phone off immediately.
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to discuss
alternatives.
208
Section 14
Other Medical Devices
If you use any other personal medical devices, consult
the manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information. Switch your phone off in health care
facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to
external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should also
consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted
notices requireyou to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded of
Section 14: Health and Safety Information 209
Emergency Calls
Section 14
the need to observe restrictions on the use of radio
equipment in fuel depots
(fuel storage and distribution areas), chemical plants or
where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include below
deck on boats, chemical transfer or storage facilities,
vehicles using liquefied petroleum gas (such as
propane or butane), areas where the air contains
chemicals or particles, such as grain, dust or metal
powders, and any other area where you would
normally be advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well as
user-programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should
never rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not be
possible on all wireless phone networks or when
certain network services and/or phone features are in
use. Check with local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
210
Section 14
2. Key in the emergency number for your present location
(for example, 911 or other official emergency number).
Emergency numbers vary by location.
3. Press the key.
If certain features are in use (call barring, for example),
you may first need to deactivate those features before
you can make an emergency call. Consult this
document and your local cellular service provider.
When making an emergency call, remember to give all
the necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut
off the call until given permission to do so.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be
allowed to play with it because they could hurt
themselves and others, damage the phone or make calls
that increase your phone bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used
in close proximity to receiving equipment. The FCC can
require you to stop using the phone if such interference
cannot be eliminated.
Vehicles using liquefied petroleum gas (such as
propane or butane) must comply with the National Fire
Protection Standard (NFPA-58). For a copy of this
standard, contact the National Fire Protection
Section 14: Health and Safety Information 211
Other Important Safety Information
Section 14
Association, One Batterymarch Park, Quincy, MA
02269, Attn: Publication Sales Division.
Cautions
Any changes or modifications to your phone not
expressly approved in this document could void your
warranty for this equipment, and void your authority
to operate this equipment. Only use approved batteries,
antennas and chargers. The use of any unauthorized
accessories may be dangerous and void the phone
warranty if said accessories cause damage or a defect to
the phone.
Although your phone is quite sturdy, it is a complex
piece of equipment and can be broken. Avoid dropping,
hitting, bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the
phone in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to the
device.
• Check regularly that all wireless phone equipment in your
vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as the phone, its parts or
accessories.
• For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both
installed or portable wireless equipment in the area over the air
bag or in the air bag deployment area. If wireless equipment is
improperly installed and the air bag inflates, serious injury
could result.
212
Section 14
• Switch your phone off before boarding an aircraft. The use of
wireless phone in aircraft is illegal and may be dangerous to
the aircraft's operation.
• Failure to observe these instructions may lead to the
suspension or denial of telephone services to the offender, or
legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends
on the signal strength in your area. Your phone informs
you of the current signal strength by displaying a
number of bars next to the signal strength icon. The
more bars displayed, the stronger the signal.
If you're inside a building, being near a window may
give you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes
of searching, a Power Save feature is automatically
activated. If your phone is active, it periodically
rechecks service availability or you can check it yourself
by pressing any key.
Anytime the Power Save feature is activated, a message
displays on the screen. When a signal is found, your
phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver.
When it's turned on, it receives and transmits radio
frequency (RF) signals. When you use your phone, the
system handling your call controls the power level.
Section 14: Health and Safety Information 213
Availability of Various Features/Ring Tones
Section 14
This power can range from 0.006 watts to 0.2 watts in
digital mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized
personnel should service your phone and accessories.
Faulty service may void the warranty.
There are several simple guidelines to operating your
phone properly and maintaining safe, satisfactory
service.
• Please note obstructing the internal antenna could inhibit call
performance.
• Hold the phone with the antenna raised, fully-extended and over
your shoulder.
• Try not to hold, bend or twist the phone's antenna.
• Don't use the phone if the antenna is damaged.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid
spills. If your phone does get wet, immediately turn the power
off and remove the battery. If it is inoperable, call Customer
Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and
may require additional subscription and/or usage
charges. Not all features are available for purchase or
use in all areas. Downloadable Ring Tones may be
available at an additional cost. Other conditions and
restrictions may apply. See your service provider for
additional information.
214
Section 14
Battery Standby and Talk Time
Standby and talk times will vary depending on phone
usage patterns and conditions. Battery power
consumption depends on factors such as network
configuration, signal strength, operating temperature,
features selected, frequency of calls, and voice, data,
and other application usage patterns.
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and
battery. If you suspect damage to the phone or battery, take it
to a service center for inspection.
• Never use any charger or battery that is damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network's base station, it uses
less power; talk and standby time are greatly affected by the
signal strength on the cellular network and the parameters set
by the network operator.
• Follow battery usage, storage and charging guidelines found in
the user’s guide.
• Battery charging time depends on the remaining battery charge
and the type of battery and charger used. The battery can be
charged and discharged hundreds of times, but it will gradually
wear out. When the operation time (talk time and standby time)
is noticeably shorter than normal, it is time to buy a new
battery.
• If left unused, a fully charged battery will discharge itself over
time.
• Use only Samsung-approved batteries and recharge your
battery only with Samsung-approved chargers. When a charger
is not in use, disconnect it from the power source. Do not leave
the battery connected to a charger for more than a week, since
overcharging may shorten its life.
Section 14: Health and Safety Information 215
Battery Precautions
Section 14
• Do not use incompatible cell phone batteries and chargers.
Some Web sites and second-hand dealers, not associated with
reputable manufacturers and carriers, might be selling
incompatible or even counterfeit batteries and chargers.
Consumers should purchase manufacturer or carrier
recommended products and accessories. If unsure about
whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
• Extreme temperatures will affect the charging capacity of your
battery: it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity
and lifetime of the battery. Always try to keep the battery at
room temperature. A phone with a hot or cold battery may
temporarily not work, even when the battery is fully charged.
Li-ion batteries are particularly affected by temperatures below
0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as
on or near a cooking surface, cooking appliance, iron, or
radiator.
• Do not get your phone or battery wet. Even though they will dry
and appear to operate normally, the circuitry could slowly
corrode and pose a safety hazard.
• Do not short-circuit the battery. Accidental short- circuiting can
occur when a metallic object (coin, clip or pen) causes a direct
connection between the + and - terminals of the battery (metal
strips on the battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the short-circuiting.
• Do not permit a battery out of the phone to come in contact with
metal objects, such as coins, keys or jewelry.
• Do not crush, puncture or put a high degree of pressure on the
battery as this can cause an internal short-circuit, resulting in
overheating.
216
Section 14
• Dispose of used batteries in accordance with local regulations.
In some areas, the disposal of batteries in household or
business trash may be prohibited. For safe disposal options for
Li-Ion batteries, contact your nearest Samsung authorized
service center. Always recycle. Do not dispose of batteries in a
fire.
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years
• Keep the phone and all its parts and accessories out of the
reach of small children's.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an
electric shock to you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its
moving parts may be damaged.
• Do not store the phone in hot areas. High temperatures can
shorten the life of electronic devices, damage batteries, and
warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone warms
up to its normal operating temperature, moisture can form
inside the phone, which may damage the phone's electronic
circuit boards.
• Do not drop, knock or shake the phone. Rough handling can
break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the phone. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water solution.
Section 14: Health and Safety Information 217
Care and Maintenance
Section 14
• Do not paint the phone. Paint can clog the device's moving
parts and prevent proper operation.
• Do not put the phone in or on heating devices, such as a
microwave oven, a stove or a radiator. The phone may explode
when overheated.
• Use only the supplied or an approved replacement antenna.
Unauthorized antennas or modified accessories may damage
the phone and violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working
properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for
service.
218
Section 14
Section 15: Warranty Information 219
Section 15
Section 15: Warranty Information
Topics Covered
• Standard Limited Warranty
220
Section 15
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P.
(“SAMSUNG”) warrants to the original purchaser
(“Purchaser”) that SAMSUNG's Phones and accessories
(“Products”) are free from defects in material and
workmanship under normal use and service for the
period commencing upon the date of purchase and
continuing for the following specified period of time after
that date:
Phone 1 Year
Batteries 1 Year
Leather Case/ Pouch 90 Days
Holster 90 Days
Other Phone Accessories 1 Year
What is Not Covered? This Limited Warranty is conditioned
upon proper use of Product by Purchaser. This Limited
Warranty does not cover: (a) defects or damage resulting
from accident, misuse, abuse, neglect, unusual physical,
electrical or electromechanical stress, or modification of
any part of Product, including antenna, or cosmetic
damage; (b) equipment that has the serial number
removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or
damaged due to normal use; (d) malfunctions resulting
from the use of Product in conjunction with accessories,
Section 15: Warranty Information 221
Standard Limited Warranty
Section 15
products, or ancillary/peripheral equipment not
furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance,
and service of Product, or (g) Product used or purchased
outside the United States or Canada. This Limited
Warranty covers batteries only if battery capacity falls
below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the
battery has been charged by a battery charger not
specified or approved by SAMSUNG for charging the
battery, (ii) any of the seals on the battery are broken or
show evidence of tampering, or (iii) the battery has been
used in equipment other than the SAMSUNG phone for
which it is specified.
What are SAMSUNG's Obligations? During the applicable
warranty period, SAMSUNG will repair or replace, at
SAMSUNG's sole option, without charge to Purchaser,
any defective component part of Product. To obtain
service under this Limited Warranty, Purchaser must
return Product to an authorized phone service facility in
an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof
of sale showing the date of purchase, the serial number of
Product and the sellers' name and address. To obtain
assistance on where to deliver the Product, call Samsung
Customer Care at 1-888-987-4357. Upon receipt,
SAMSUNG will promptly repair or replace the defective
Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components
when repairing any Product or replace Product with a
rebuilt, reconditioned or new Product. Repaired/
222
Section 15
replaced leather cases, pouches and holsters will be
warranted for a period of ninety (90) days. All other
repaired/replaced Product will be warranted for a period
equal to the remainder of the original Limited Warranty
on the original Product or for 90 days, whichever is longer.
All replaced parts, components, boards and equipment
shall become the property of SAMSUNG. If SAMSUNG
determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts,
shipping, and labor charges for the repair or return of such
Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT “AS IS,” AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE
ARE NO CONDITIONS, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
• “THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS
FOR ANY PARTICULAR PURPOSE OR USE;
• “WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• “DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE
PRODUCT;
• “THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
• “COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING
THERETO.
Section 15: Warranty Information 223
Standard Limited Warranty
Section 15
NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN
EXPRESS WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE
BY OPERATION OF LAW, INCLUDING IF
APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO
THE SAME DURATION OF TIME AS THE EXPRESS
WRITTEN WARRANTY STATED HEREIN. SOME
STATES/PROVINCES DO NOT ALLOW LIMITATIONS
ON HOW LONG AN IMPLIED WARRANTY LASTS, SO
THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
IN ADDITION, SAMSUNG SHALL NOT BE LIABLE
FOR ANY DAMAGES OF ANY KIND
RESULTING FROM THE PURCHASE, USE, OR MISUSE
OF, OR INABILITY TO USE THE PRODUCT OR
ARISING DIRECTLY OR INDIRECTLY FROM THE USE
OR LOSS OF USE OF THE PRODUCT OR FROM THE
BREACH OF THE EXPRESS WARRANTY, INCLUDING
INCIDENTAL, SPECIAL, CONSEQUENTIAL OR
SIMILAR DAMAGES, OR LOSS OF ANTICIPATED
PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR
GROSS NEGLIGENCE) OR FAULT COMMITTED BY
SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR
ANY BREACH OF CONTRACT OR FOR ANY CLAIM
BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
224
Section 15
LIMITATION OR EXCLUSION MAY NOT APPLY TO
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS, WHICH VARY FROM STATE TO STATE/
PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE
OTHER THAN THE ORIGINAL PURCHASER OF THIS
PRODUCT AND STATES PURCHASER'S EXCLUSIVE
REMEDY. IF ANY PORTION OF THIS LIMITED
WARRANTY IS HELD ILLEGAL OR
UNENFORCEABLE BY REASON OF ANY LAW, SUCH
PARTIAL ILLEGALITY OR UNENFORCEABILITY
SHALL NOT AFFECT THE ENFORCEABILITY FOR
THE REMAINDER OF THIS LIMITED WARRANTY
WHICH PURCHASER ACKNOWLEDGES IS AND
WILL ALWAYS BE CONSTRUED TO BE LIMITED BY
ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR
EQUIPMENT IN CONJUNCTION WITH THE
PRODUCT. SAMSUNG MAKES NO WARRANTIES OR
REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
OR OTHERWISE, AS TO THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE OR
SUITABILITY OF ANY THIRDPARTY SOFTWARE OR
EQUIPMENT, WHETHER SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT IS INCLUDED WITH
THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT
WITH THE PRODUCT. THE QUALITY, CAPABILITIES,
Section 15: Warranty Information 225
Standard Limited Warranty
Section 15
OPERATIONS, PERFORMANCE AND SUITABILITY
OF ANY SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER
OF SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG's
Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited Warranty.
The agents, employees, distributors, and dealers of
SAMSUNG are not authorized to make modifications to
this Limited Warranty, or make additional warranties
binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation,
whether oral or written, do not constitute warranties by
SAMSUNG and should not be relied upon.
Samsung Telecommunications America, L.P.
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2005 Samsung Telecommunications America. All
rights reserved.
No reproduction in whole or in part allowed without
prior written approval. Specifications and availability
subject to change without notice.
Printed in Korea
226
Section 15
227
Index
Numerics
1X protocol 23
2G protocol 23
3G protocol 23
911 180
A
Add, edit, erase tasks 165
Adjust
camera brightness 151
color tone 148
key beep 127
ringer setting 29, 36
Alarm clock
set the alarm 170
turn off the alarm 171
when an alarm sounds
171
Alerts 128
Animation 117
Animation, choosing 117
Apps
buying 112
cancelling subscription
112
demo 112
disabled 113
expired 113
removing 113
restoring 113
Auto Answer 187
Auto hyphen 121
Auto retry 185
B
Backlight settings 120
Banner 119
Banner, creating 119
Battery
charging 24
installation 10
low battery indicator 25
removal 10
Brightness, pictures 151
Buying new apps 112
C
Calculator 173
Call answer 37, 186
Call Answer mode 26
Call block 38
Call Functions
Answering a Call 35
Making a Call 32
Call notification types 36
Call options 185
Call restriction 182
Call timer 42
Call waiting 37
Caller ID 38
Callscall timer 42
data counter 43
erase logs 42
228
incoming 41
missed 41
outgoing 40
store numbers 44
Calls menu 40
Camera 131
Brightness 137
Color Tones 139
Flash 134
Fun Frame 138
Multi Shot 136
Options 134
Picture Gallery 141
Save Pictures 141
Screen 133
Screen Icons 133
Self Timer 135
Settings 145
Taking Pictures 132
Taking Videos 143
Video Gallery 144
Camera flash
turn on or off 146
Camera key 22
Camera mode 30
Camera Screen 133
Camera settings 145
Camera shutter key 22
Change languages 189
Change lock 179
Change menu style 117
Clear key 21
Clock set 189
Color tones 148
Contacts 70
add pauses 77
edit numbers 76
find by entry 74
find by group 75
find by name 73
opening 70
rename a group 75
Save a number after a
call 83
Contacts List
Memory 86
Contacts, in Voice Kit 49
Count down 168
Create messages 88
D
Data Counter 43
Data sub menu 186
Data, view counters 43
Delay pictures 135
Demo apps 112
Dial Digits 121
Dial Screen 122
Digit Dial
adapt to your voice 160
adaptation 159
description 46, 158
reset adaptation 161
tips adapting 160
use 47, 159
Disabled apps 113
229
Display 115
Display screen icons 22
Display settings 116
animation 117
auto hyphen 121
backlight 120
banner 119
dial digits 121
dial screen 122
front display 118
menu style 117
Display sub menu 116
Draft folder 100
Draft messages 100
E
easyedgeSM 109
Help 111
Settings 110
Shopping and download-
ing 110
Edit numbers 76
Edit text options 103
Emergency #s in lock
mode 181
Emergency numbers 180
End key 21
Entering Text 63
Changing the Text Entry
Mode 71
Entering Numbers 68
Entering Symbols 67
Entering Upper and Low-
er Case 66
Using T9 Mode 65
Erase logs 42
Erase memory 183
Erase memos 157
Erase messages 108
Erase total timers 43
Expired apps 113
F
Fast fact, description 13
Findby entry 74
by group 75
by name 73
Find by entry 74
Flash 134
Flash, camera 146
Front display, changing
118
Fun frames 147
G
Gallery, picture 141
General message settings
107
Getting Started 9
Activating Your Phone 10
Understanding this User
Manual 12
Voicemail 12
Go back one menu 54
GPS icons 24
GPS Setting 176
230
Groups, renaming 75
H
Hardware version, viewing
190
Health and Safety Infor-
mation 191
I
Icons
display 22
number type 71, 72, 84
Ignore calls 38
Inbox folder 98
Incoming calls 35
Incoming calls menu 41
Input mode 27
IS95-2G protocol 23
J
Jump to date 164
K
Key beep 127
L
Language setting 189
Left soft key 19
Lock code, changing 179
Lock mode 27
Lock phone 178
M
Menu Navigation 53
Menu Outline 56
Menu style, changing 117
Message folder
draft box 100
inbox 98
outbox 99
saved box 103
voice 98
voice mail 98
Message Folders
Erase messages 108
Message send options 90
Message settings, general
107
Messages and lock mode
100
Messages, creating 88
Messages, receive in call
91
Messaging 87
Types of Messages 88
Missed calls menu 41
Mode
call answer 26
camera 30
input 27
lock 27
silent 29
standby 28
talk 28
vibrate 29
Msg setting sub menu 105
Multi shot 136
My phone # 85
231
N
Name Dial 48
Navigation key 20
Navigation key shortcuts
55
Network sub menu 176
New message options 89
Notes and tips 13
Notes, description 13
Number type icons 71, 72,
84
O
Outbox folder 99
Outbox, reviewing mes-
sages 99
Outgoing 40
P
P pause 77
Pause dial 32, 78
Pauses, adding 77
Picture borders 147
Picture gallery 141
Picture message settings
106
Picture messages
online viewing 97
receiving 97
Send in camera mode 92
Pictures
brightness 151
color tones 148
fun frames 147
quality 150
resolution 146
sending 152
shutter sound 149
zooming in 150
Power On/Off sound 129
Power save mode 26
Powering off 11
Powering on 11
Q
Quality, pictures 150
Quick Dial
erase name 155
record a name 154
review list 155
tips 154
use 49, 155
R
Receive messages in call
91
Receive pic messages 97
Receive text messages 91
Record memos 50, 156
Removing apps 113
Reset your phone 184
Resolution, notes about
147, 150
Resolution, pictures 146
Restoring apps 113
Restrict calls 182
232
Return to last menu 54
Review calls 42
Reviewing outbox 99
Right soft key 19
Ringer types, assigning
126
Roam ringer 129
S
Save a number after a call
83
Save pictures 141
SCH-a670 closed view 17
SCH-a670 open view 18
Scheduler 163
jump to date 164
view an event 163
Security sub menu 178
Self timer 135
Send key 20
Send options 90
Send pix messages 152
Service LED settings 122
Settings 175
Display 116
Location Setting 176
Settings, pix messages 106
Settings, text messages
106
Shortcut sub menu 188
Shortcut to menus 55
Shutter sound 149
Silence ringer 38
Silent mode
entering 29
exiting 29
Software version, viewing
190
Sounds 125
Standby mode 28
Store emergency #s 181
Store numbers after a call
83
Subscriptions, cancelling
112
T
T pause 77
Take pictures
with flip open 132
Taking pictures 132
Taking videos 143
Talk mode 28
Text entry modes 88
Text message settings 106
Text messages, receiving
91
Text Modes
changing 64
Three-way calling 32
Timer, calls 42
Timer, camera 135
233
Tip, description 13
To do list 164
add, edit, erase tasks
165
Tools 153
add new event 161
alarm clock 170
calculator 173
count down 168
memo pad 166
scheduler 163
to do list 164
today 161
world time 172
Travel charger 24
TTY Mode 187
Turn your phone off 11
Turn your phone on 11
U
Understanding Your Phone
15 Battery 24
Command Keys 19
Display 22
Features of Your Phone
16
Front View of Your Phone
17
Understanding Your
Phonebook 69
Deleting a Phonebook En-
try 85
Editing an Existing
Phonebook Entry 76
Finding a Phonebook En-
try 73
V
Version 190
Vibrate mode 29
Video gallery 144
Video recording 143
View an event, scheduler
163
Voice folder 98
Voice Kit
commands 46
Contacts 49
Digit Dial 46, 158
erase all memos 157
Name Dial 48
Quick Dial 49, 154
record memos 50, 156
review and erase memos
157
Set Active 158
Voice Memos 50, 156
Voice mail
checking 45, 98
setup 45
Voice Memos 50, 156
W
Warranty Information 219
Whisper mode 130
World time 172
234
Z
Zooming, pictures 150

Navigation menu