Samsung St500 Users Manual ST500/ST510_Ver1.2

ST510 - User Manual ST500_ST510_English Free User Guide for Samsung Camera, Manual - page4

: Samsung Samsung-St500-Users-Manual-794748 samsung-st500-users-manual-794748 samsung pdf

Open the PDF directly: View PDF .
Page Count: 110 [warning: Documents this large are best viewed by clicking the View PDF Link!]

This user manual includes detailed usage

instructions for your camera. Please read

this manual thoroughly.

 Click a topic

User Manual

ST500/ST510

Common questions

Quick reference

Contents

Basic functions

Extended functions

Shooting options

Playback/Editing

Appendixes

Index

1

Health and safety information

Always comply with the following precautions and usage tips to avoid dangerous situations and ensure peak performance of your camera.

Warning—situations that could cause injury to yourself or

others

Caution—situations that could cause damage to your

camera or other equipment

Note—notes, usage tips, or additional information

Safety warnings

Do not use your camera near flammable or explosive

gases and liquids

Do not use your camera near fuels, combustibles, or flammable

chemicals. Do not store or carry flammable liquids, gases, or

explosive materials in the same compartment as the camera or its

accessories.

Keep your camera away from small children and pets

Keep your camera and all accessories out of the reach of small

children and animals. Small parts may cause choking or serious

injury if swallowed. Moving parts and accessories may present

physical dangers as well.

Prevent damage to subjects’ eyesight

Do not use the flash in close proximity (closer than 1 m/3 ft) to

people or animals. Using the flash too close to your subject’s

eyes can cause temporary or permanent damage.

Handle and dispose of batteries and chargers with care

Use only Samsung-approved batteries and chargers. t

Incompatible batteries and chargers can cause serious injuries

or damage to your camera.

Never dispose of batteries in a fire. Follow all local regulations t

when disposing of used batteries.

Never place batteries or cameras on or in heating devices, t

such as microwave ovens, stoves, or radiators. Batteries may

explode when overheated.

Safety precautions

Handle and store your camera carefully and sensibly

Do not allow your camera to get wet—liquids can cause serious t

damage. Do not handle your camera with wet hands. Water

damage to your camera can void your manufacturer’s warranty.

2

Health and safety information

Protect batteries, chargers, and memory cards from

damage

Avoid exposing batteries or memory cards to very cold or very •

hot temperatures (below 0º C/32º F or above 40º C/104º F).

Extreme temperatures can reduce the charging capacity of your

batteries and can cause memory cards to malfunction.

Prevent batteries from making contact with metal objects, as •

this can create a connection between the + and – terminals

of your battery and lead to temporary or permanent battery

damage.

Prevent memory cards from making contact with liquids, dirt, or •

foreign substances. If dirty, wipe the memory card clean with a

soft cloth before inserting in your camera.

Do not allow liquids, dirt, or foreign substances to come in •

contact with the memory card slot. Doing so may cause the

camera to malfunction.

Turn off the camera when inserting or removing the memory •

card.

Do not bend, drop, or subject memory cards to heavy impact •

or pressure.

Do not use memory cards that have been formatted by other •

cameras or by a computer. Reformat the memory card with

your camera.

Never use a damaged charger, battery, or memory card.•

Do not expose the camera to direct sunlight or high •

temperatures for an extended period of time. Prolonged

exposure to sunlight or extreme temperatures can cause

permanent damage to your camera’s internal components.

Avoid using or storing your camera in dusty, dirty, humid, or •

poorly-ventilated areas to prevent damage to moving parts and

internal components.

Remove the batteries from your camera when storing it for an •

extended period of time. Installed batteries may leak or corrode

over time and cause serious damage to your camera.

Protect your camera from sand and dirt when using it on •

beaches or in other similar areas.

Protect your camera and monitor from impact, rough handling, •

and excessive vibration to avoid serious damage.

Exercise caution when connecting cables or adapters and •

installing batteries and memory cards. Forcing the connectors,

improperly connecting cables, or improperly installing batteries

and memory cards can damage ports, connectors, and

accessories.

Do not insert foreign objects into any of your camera’s •

compartments, slots, or access points. Damage due to

improper use may not be covered by your warranty.

3

Health and safety information

Exercise caution when using the camera in humid

environments

When transferring the camera from a cold environment to a warm

and humid one, condensation can form on the delicate electronic

circuitry and memory card. In this situation, wait for at least 1 hour

until all moisture has evaporated before using the camera.

Check that the camera is operating properly before use

The manufacturer takes no responsibility for any loss of files or

damage that may result from camera malfunction or improper

use.

Use only Samsung-approved accessories

Using incompatible accessories may damage your camera,

cause injury, or void your warranty.

Protect your camera’s lens

Do not expose the lens to direct sunlight, as this may discolour t

the image sensor or cause it to malfunction.

Protect your lens from fingerprints and scratches. Clean your t

lens with a soft, clean, debris-free lens cloth.

Important usage information

Allow only qualified personnel to service your camera

Do not allow unqualified personnel to service the camera or

attempt to service the camera yourself. Any damage that results

from unqualified service is not covered by your warranty.

Ensure maximum battery and charger life

Overcharging batteries may shorten battery life. After charging is t

finished, disconnect the cable from your camera.

Over time, unused batteries will discharge and must be t

recharged before use.

Disconnect chargers from power sources when not in use.t

Use batteries only for their intended purpose.t

4

©2009 SAMSUNG DIGITAL IMAGING CO., LTD.

Camera specifications or contents of this manual may be

changed without prior notice due to upgrade of camera

functions.

Copyright information

Microsoft Windows and the Windows logo are t

registered trademarks of the Microsoft Corporation.

Mac is a registered trademark of the Apple Corporation.t

Organisation of the user manual

Basic functions 11

Learn about your camera’s layout, icons, and basic

functions for shooting.

Extended functions 30

Learn how to take a photo by selecting a mode and

how to record a video or voice memo.

Shooting options 40

Learn about the options you can set in Shooting mode.

Playback/Editing 62

Learn how to play back photos, videos, or voice

memos and edit photos or videos. Also, learn how

to connect your camera to your photo printer, TV, or

HDTV.

Appendixes 88

Refer to settings, error messages, specifications, and

maintenance tips.

5

Indications used in this manual

Shooting mode Indication

Smart Auto

S

Auto

a

Program

p

Scene

s

DUAL IS

d

Movie

v

Shooting mode icons

These icons indicate that a function is available in the

corresponding modes. The s mode may not support functions

for all scenes.

e.g.)

Available in the

Program, DUAL IS,

and Movie modes

Icons used in this manual

Icon Function

Additional information

Safety warnings and precautions

[] Camera buttons; for example: [Shutter]

(represents the shutter button)

() Page number of related information



The order of options or menus you must select to perform

a step; for example: Select

>



(represents Select

>

, and then )

*Annotation

Abbreviations used in this manual

Abbreviation Definition

ACB Auto Contrast Balance

AEB Auto Exposure Bracket

AF Auto Focus

DIS Digital Image Stabilisation

DPOF Digital Print Order Format

EV Exposure Value

OIS Optical Image Stabilisation

WB White Balance

6

Expressions used in this manual

Pressing the shutter

Half-press [t Shutter]: press the shutter halfway down

Press [t Shutter]: press the shutter all the way down

Half-press [Shutter] Press [Shutter]

Subject, background, and composition

Subjectt : the main object of a scene, such as a person, animal,

or still life

Backgroundt : the objects around the subject

Compositiont : the combination of a subject and background

Background

Subject

Composition

Exposure (Brightness)

The amount of light that enters your camera determines the

exposure. You can alter the exposure with shutter speed,

aperture value, and ISO speed. By altering the exposure, your

photos will be darker or lighter.

Normal exposure Overexposure (too bright)

7

Common questions

You can get answers to common questions. Solve problems easily by setting shooting options.

The subject's eyes

appear red.

This is caused by a reflection from the camera flash.

Set the flash option to t Red-eye or Red-eye Fix. (p. 45)

If the photo has already been taken, select t Red-eye Fix in the edit menu. (p. 77)

Photos have dust spots. Dust particles floating in the air may be captured in photos when using the flash.

Turn off the flash or avoid taking photos in a dusty place.t

Set ISO speed options. (p. t 46)

Photos are blurred. This may be caused by taking photos in low light conditions or holding the camera incorrectly.

Use the t

d

mode. (p. 36)

Press [t Shutter] halfway down to make sure the subject is focused. (p. 28)

Photos are blurred when

shooting at night.

As the camera tries to let in more light, the shutter speed slows.

This can make it difficult to steady the camera and may result in camera shake.

Turn on the flash. (p. t 45)

Select t Night in the

s

mode. (p. 35)

Set ISO speed options. (p. t 46)

Use a tripod to prevent your camera from shaking.t

Subjects come out

too dark because of

backlighting.

When the light source is behind the subject or when there is a high contrast between the light and dark

areas, the subject may come out shaded.

Avoid shooting in front of the sun.t

Select t Backlight in the

s

mode. (p. 32)

Set the flash option to t Fill in. (p. 45)

Set the Auto Contrast Balance (t ACB) option. (p. 55)

Adjust the exposure. (p. t 54)

Set the metering option to t Spot if a bright subject is in the centre of the frame. (p. 56)

8

Quick reference

Taking photos of people

s

t mode > Beauty Shot, Portrait, Children

f

32

Red-eyet , Red-eye Fix (to prevent or correct red-eye)

f

45

Face Detectiont

f

50

Taking photos at night or in the dark

s

t mode > Night, Dawn, Fireworks

f

32

Flash options t

f

45

ISO speed (to adjust the sensitivity to light) t

f

46

Taking action photos

Continuoust , Motion Capture

f

59

Taking photos of text, insects, or

flowers

s

t mode > Close Up, Text

f

32

Macrot , Auto Macro, Super Macro (to take close-up

photos)

f

47

White Balancet (to change the colour tone)

f

57

Adjusting the exposure (brightness)

ISO speed (to adjust the sensitivity to light) t

f

46

EV (to adjust exposure) t

f

54

ACB (to compensate for subjects against bright t

backgrounds)

f

55

Meteringt

f

56

AEB (to take 3 photos of the same scene with different t

exposures)

f

59

Applying a different effect

Photo styles (to apply tones) t

f

60

Image adjustment (to adjust saturation, sharpness, or t

contrast)

f

61

Reducing camera shake

Optical Image Stabilisation (OIS) t

f

27

d

t mode

f

36

Viewing files by category in t

Smart Album

f

66

Deleting all files on the t

memory card

f

68

Viewing files as a slide show t

f

70

Viewing files on a TV t

f

79

Connecting your camera to a t

computer

f

80

Adjusting sound and volume t

f

90

Changing the display t

language

f

90

Adjusting the brightness of t

the display

f

91

Setting the date and time t

f

91

Formatting the memory card t

f

91

Troubleshooting t

f

99

9

Contents

Using the DUAL IS mode ..................................................... 36

Using the Program mode ..................................................... 36

Taking a self-portrait shot ...................................................... 37

Recording a video ............................................................... 37

Recording voice memos ................................................... 39

Recording a voice memo ..................................................... 39

Adding a voice memo to a photo .......................................... 39

Shooting options ................................................................... 40

Selecting a resolution and quality ...................................... 41

Selecting a resolution ........................................................... 41

Selecting image quality ........................................................ 42

Using the timer .................................................................. 43

Shooting in the dark .......................................................... 45

Preventing red-eye .............................................................. 45

Using the flash .................................................................... 45

Adjusting the ISO speed ...................................................... 46

Changing the camera’s focus ............................................ 47

Using macro ....................................................................... 47

Using auto focus ................................................................. 47

Using smart touch focus ...................................................... 48

Using one touch shooting .................................................... 49

Adjusting the focus area ....................................................... 49

Using face detection ......................................................... 50

Detecting faces ................................................................... 50

Taking a smile shot .............................................................. 51

Detecting eye blinking .......................................................... 51

Using smart face recognition ................................................ 52

Registering faces as your favourites (My Star) ......................... 53

Basic functions ...................................................................... 11

Unpacking ......................................................................... 12

Camera layout ................................................................... 13

Icons ................................................................................. 15

Inserting the battery and memory card .............................. 16

Charging the battery and turning your camera on ............. 17

Charging the battery ............................................................ 17

Turning on your camera ........................................................ 17

Performing the initial setup ................................................ 18

Using the touch screen ..................................................... 19

Selecting a shooting mode ................................................ 21

Selecting a shooting mode using motion recognition .............. 22

Setting the dual displays and sound .................................. 23

Setting the front display ........................................................ 23

Setting the display type for the touch screen .......................... 24

Setting the touch vibration or sound ...................................... 24

Taking photos .................................................................... 25

Zooming ............................................................................. 26

Reducing camera shake (OIS) .............................................. 27

Tips for getting a clearer photo .......................................... 28

Extended functions .............................................................. 30

Shooting modes ................................................................ 31

Using the Smart Auto mode ................................................. 31

Using the Scene mode ........................................................ 32

Using the Beauty Shot mode ................................................ 33

Using the frame guide .......................................................... 34

Using the Children mode ..................................................... 34

Adjusting the exposure in the Night mode .............................. 35

10

Contents

Adjusting brightness and colour ........................................ 54

Adjusting the exposure manually (EV) .................................... 54

Compensating for backlighting (ACB) .................................... 55

Changing the metering option ............................................... 56

Selecting a light source (White balance) ................................. 57

Using burst modes ............................................................ 59

Improving your photos ...................................................... 60

Applying photo styles ........................................................... 60

Defining your own RGB tone ................................................ 60

Adjusting your photos .......................................................... 61

Playback/Editing ................................................................... 62

Playing back ...................................................................... 63

Starting Playback mode ....................................................... 63

Viewing photos ................................................................... 69

Playing a video .................................................................... 71

Playing a voice memo .......................................................... 72

Editing a photo .................................................................. 74

Rotating a photo .................................................................. 74

Resizing photos .................................................................. 74

Editing colour ...................................................................... 75

Defining your own RGB tone ................................................ 75

Applying a special effect ...................................................... 76

Correcting exposure problems ............................................. 76

Editing photos of portraits ..................................................... 77

Creating a print order (DPOF) ................................................ 78

Viewing files on a TV ......................................................... 79

Transferring files to your computer (for Windows) .............. 80

Transferring files using Intelli-studio ........................................ 81

Transferring files by connecting the camera as a removable

disk .................................................................................... 83

Disconnecting the camera (for Windows XP) .......................... 84

Transferring files to your computer (for Mac) ...................... 85

Printing photos with a photo printer (PictBridge) ............... 86

Appendixes ............................................................................ 88

Settings menu ................................................................... 89

Accessing the settings menu ................................................ 89

Sound settings .................................................................... 90

Display settings ................................................................... 90

Camera settings .................................................................. 91

Error messages ................................................................. 94

Camera maintenance ........................................................ 95

Cleaning your camera .......................................................... 95

About memory cards ........................................................... 96

About the battery ................................................................. 97

Before contacting a service centre .................................... 99

Camera specifications ..................................................... 102

Index ............................................................................... 106

Unpacking …………………………………… 12

Camera layout ……………………………… 13

Icons …………………………………………… 15

Inserting the battery and memory card … 16

Charging the battery and turning your

camera on …………………………………… 17

Charging the battery …………………………… 17

Turning on your camera ……………………… 17

Performing the initial setup ………………… 18

Using the touch screen …………………… 19

Selecting a shooting mode ………………… 21

Selecting a shooting mode using motion

recognition ……………………………………… 22

Setting the dual displays and sound ……… 23

Setting the front display ……………………… 23

Setting the display type for the touch screen … 24

Setting the touch vibration or sound ………… 24

Taking photos ………………………………… 25

Zooming ……………………………………… 26

Reducing camera shake (OIS) ………………… 27

Tips for getting a clearer photo …………… 28

Basic functions

Learn about your camera’s layout, icons, and basic functions for shooting.

Basic functions

12

Camera AC adapter/

USB cable

Rechargeable battery

Touch pen

Strap

User Manual CD-ROM

Quick Start Manual

Unpacking

Check your product box for the following items.

The illustrations may differ from your actual items.

Optional accessories

Camera case

A/V cable

Memory card

(microSD

TM

)

Basic functions

13

Camera layout

Before you start, familiarise yourself with your camera's parts and their functions.

Flash

Lens

AF-assist light/

timer lamp

Front display

Battery chamber cover

Insert a memory card and battery

USB and A/V port

Accepts USB cable and A/V cable

Tripod mount

Speaker

Shutter button POWER button

Basic functions

14

Camera layout

Main display

*

* Referred to “Touch screen”

in this manual

Playback button

Microphone

Status lamp

Blinkingt : When saving a photo or video, being

read by a computer or printer, or out of focus

Steadyt : When connecting to a computer or in

focus

Zoom button

Zoom in or outt

Zoom in on part of a photo or t

view files as thumbnails

1

2

Basic functions

15

Icon Description

Display type

Motion recognition

M

Shooting options and settings menu

f

Image setting options

t : Exposure value

t : White balance

t : ISO speed

t : Face tone

t : Face retouch

t : Focus area option

t : Face detection option

t : Photo resolution

t : Video resolution

t : Photo quality

t : Frame rate

t : Exposure with ACB

t : Metering option

t : Burst type

t : Photo styles

t : Image adjustment (sharpness,

contrast, saturation)

t : Long time shutter

t : Optical Image Stabilisation (OIS)

t : Audio recording

<>

t : Another row of options

Icons

The icons displayed will change according to the mode you select or the options you set.

A. Status icons

Icon Description

p

Shooting mode

Aperture and shutter speed

Photo resolution

Video resolution

Metering

Optical Image Stabilisation (OIS)

Frame rate

Exposure value

ISO speed

White balance

Face detection

Burst mode

Image adjustment (sharpness,

contrast, saturation)

Icon Description

Photo styles

Available number of photos

Available recording time

Internal memory

Memory card inserted

t : Fully charged

t : Partially charged

t : Charging needed

Zoom ratio

Voice memo

Auto focus frame

Camera shake

Option set 1 (of 3)

Current date and time

Grid lines

B. Option icons (touch)

Icon Description

Flash option

Auto focus option

Timer option

B

A

Basic functions

16

Inserting the battery and memory card

Learn to insert the battery and an optional microSDTM memory card into the camera.

Removing the battery and memory card

Push gently until the card

disengages from the

camera and then pull it out

of the slot.

Push the lock up to release

the battery.

The internal memory can be used as a temporary storage device when the

memory card is not inserted.

Memory card

Battery

Battery lock

Insert a memory card with

the gold-coloured contacts

facing up.

Insert the battery with the

Samsung logo facing up.

Basic functions

17

Charging the battery and turning your camera on

Turning on your camera

Press [POWER] to turn your camera on or off.

The initial setup screen appears when you turn on the camera t

for the first time. (p. 18)

Turning on your camera in Playback mode

Press [P]. The camera turns on and accesses Playback mode

immediately.

Press and hold [

P

] to mute camera sounds.

Charging the battery

Before using the camera for the first time, you must charge the

battery. Attach the USB cable to the AC adapter and then plug

the end of cable with the indicator light into your camera.

Indicator light

Redt : Charging

Greent : Fully charged

Basic functions

18

Performing the initial setup

The initial setup screen appears to allow you to configure the camera's basic settings.

Set the date and time, select a date format, and select

6

.

Select

7

Calibration.

Tap the target on the screen with your touch pen.

8

Calibration

Tap directly in the centre of the target for optimal performance.

Select

9

to switch to the Shooting mode.

Select

1

Language.

Select a language.

2

Select

3

Time Zone (Time Zone).

Select a time zone and select

4

.

To set the daylight-saving time, select t .

Select

5

Date & Time (Date & Time).

Basic functions

19

Using the touch screen

Learn basic actions to use the touch screen. Use the supplied touch pen to touch or drag on the screen.

Touching

Touch an icon to select a menu or option.

Dragging

Drag left or right to scroll horizontally.

-2 -1 0 +2-2 -

1

0

0

+

2+1

EV

Do not use other sharp objects, such as pens or pencils, to touch the screen.

Doing so may damage the screen.

When you touch or drag on the screen, discolourations will occur. It t

is not a malfunction but a characteristic of the touch screen. Touch or

drag lightly to reduce these annoying effects.

The touch screen may not recognise your touches correctly when:t

you touch multiple items at the same time -

you use the camera in high humidity environments -

you use the camera with an LCD protection film or another LCD -

accessory

If you touch the screen with your finger, the screen may not recognise t

your input.

If you perform no operations for few seconds, the screen will dim to t

save battery life.

Basic functions

20

Using the touch screen

Using gestures

Perform certain functions by drawing commands on the touch

screen.

Gesture Description

Draw a horizontal bar to right or left to view the

next or previous file.

Draw an X to delete a photo.

Draw a circle to rotate a photo.

Draw a diagonal to move the enlarged photo.

Basic functions

21

Selecting a shooting mode

Learn how to select a shooting mode. Your camera provides you with various modes for shooting.

Mode Description

S

Smart Auto: Take a photo by letting the camera select

a scene mode as it detects. (p. 31)

a

Auto: Take a photo quickly and easily with minimal

settings. (p. 25)

p

Program: Take a photo by setting options. (p. 36)

s

Scene: Take a photo with options preset for a specific

scene. (p. 32)

d

DUAL IS: Take a photo with options suitable for

reducing camera shake. (p. 36)

v

Movie: Record a video. (p. 37)

Select the mode icon.

1

Select a mode.

2

Basic functions

22

Selecting a shooting mode

Access the Smart Auto mode (p. 31)

Motion recognition may not work well if you hold the camera parallel to the

ground, as shown below.

Selecting a shooting mode using motion

recognition

Your camera features a built-in motion sensor that allows you to

quickly switch the shooting mode by tilting the camera.

In Shooting mode, tilt the camera while touching and

holding .

Access the Movie mode (p. 37)

Access the Program mode (p. 36)

Basic functions

23

Setting the dual displays and sound

Learn how to change the basic settings for the front display and touch screen according to your preferences.

Your camera will not remember your option setting once you turn off t

the camera. Set options for the front display when you turn on your

camera.

If the camera is subjected to a strong impact, the front display may t

turn on or off.

The front display will not be available in the t

v

and modes or

when you connect the camera to a TV.

When you set front display or timer options, the front display will t

remain active.

After tapping the front display or setting front display or timer options, t

the date and time will not be shown.

The front display will help you to take photos conveniently when:t

you take a self-portrait shot (p. - 37)

you use the timer options (p. - 43)

you take photos of children (p. - 34)

When using camera buttons or touch icons, the front display will not t

be active.

When you use the camera in brightly lit or sunny areas, you may not t

be able to see the front display clearly.

If you take photos using the front display, the actual photo may appear t

slightly different than what you compose.

Setting the front display

Set the front display to display shooting options, such as macro

or flash options. You can also inform your subject to pose for a

photo.

In Shooting mode, select

1

 Front Display.

Select an option.

2

Option Description

Off: Deactivate the display of the shutter or function

information.

On: Activate the front display

Function Info: Display the flash and macro options.

Shutter Info: Display graphics for your subject to

inform your subject to pose for a photo when you

half-press [Shutter].

Front

Display

Main

Display

Basic functions

24

Setting the dual displays and sound

Setting the touch vibration or sound

Set whether your camera vibrates or emits a specified sound

when you touch on the screen.

In Shooting or Playback mode, select

1

M

.

Select

2

 Haptic&Sound.

1/2

Volume

Haptic Strength

Haptic&Sound

Shutter Sound

Start Sound

Off

Haptic

Sound

All

: Medium

Select an option.

3

Option Description

Off The camera will neither vibrate nor sound.

Haptic The camera will vibrate.

Sound The camera will sound.

All The camera will vibrate and sound

simultaneously.

Select

4

to return to the previous mode.

Setting the display type for the touch screen

In Shooting mode, select

1

 Main Display.

(In Playback mode, select .)

Select an option.

2

Front

Display

Option Description

Full: Display the name of an option when you select an

icon.

Basic: Display icons without the name of an option. This

option is available only in Playback mode.

Hide: Hide icons on the screen if you perform no

operations for 3 seconds (touch the screen to display

icons again).

Guide Line: Display grid lines. The grid lines are helpful

for getting the photo aligned with a surface, such as the

horizon or the edges of buildings. This option is available

only in Shooting mode.

Main

Display

Basic functions

25

Taking photos

Learn basic actions to take photos easily and quickly in the Auto mode.

Make sure that the camera is in the

1

a

mode (Auto), the

camera’s default shooting mode.

If not, select the mode icon t 

a

.

Align your subject in the frame.

2

Half-press [

3

Shutter] to focus.

A green frame means the subject in focus.t

F3.5

1/30s

Press [

4

Shutter] to take a photo.

See page 28 for tips to get clearer photos.

Basic functions

26

Taking photos

Zooming

You can shoot close-up photos by adjusting the zoom. Your

camera has a 4.6X optical zoom and 5X digital zoom. By using

both, you can zoom in up to 23 times.

Push [Zoom] right to zoom in on your subject. Push [Zoom] left

to zoom out.

Zoom inZoom out

Zoom ratio

The zoom ratio available for videos differs.

Digital zoom

If the zoom indicator is in the digital range, your camera is using

the digital zoom. The picture quality may deteriorate when you

use the digital zoom.

Optical range

Zoom indicator

Digital range

The digital zoom is not available when using t

S

,

d

,

s

(in some

scenes), and

v

modes and when used with Face Detection.

It may take longer to save a photo when using the digital zoom.t

Basic functions

27

Taking photos

OIS may not function properly when:t

you move your camera to follow a moving subject -

you use digital zoom -

there is too much camera shake -

the shutter speed is slow (e.g., when you select - Night in the

s

mode)

the battery is low -

you take a close-up shot -

If you use the OIS function with a tripod, your images may be blurred t

by the vibration of the OIS sensor. Deactivate the OIS function when

you use a tripod.

If the camera is impacted, the display will be blurry. In this case, turn t

off the camera and turn it on again to use the OIS function correctly.

Reducing camera shake (OIS)

Reduce camera shake optically in Shooting mode.

Before correction After correction

In Shooting mode, select

1

f



>

(once or twice)  .

Select an option.

2

Option Description

Off: Deactivate the OIS function.

On: Activate the OIS function.

apsv

Basic functions

28

Reducing camera shake

Set the Optical Image Stabilisation option to t

reduce camera shake optically. (p. 27)

Select the t

d

mode to reduce camera shake

both optically and digitally. (p. 36)

When

h

is displayed

F3.5

1/30s

Camera shake

When shooting in the dark, avoid setting the flash option to Slow

Sync or Off. The aperture remains open longer and it may be harder

to hold the camera still.

Use a tripod or set the flash option to t Fill in. (p. 45)

Set ISO speed options. (p. t 46)

Tips for getting a clearer photo

Holding your camera correctly

Make sure nothing is

blocking the lens.

Half-pressing the shutter button

Half-press [Shutter] and adjust the

focus. Focus and exposure will be

adjusted automatically.

F3.5

1/30s

The aperture value and shutter

speed are automatically set.

Focus frame

Press [t Shutter] to take the

photo if displayed in green.

Change the frame and t

half-press [Shutter] again if

displayed in red.

Basic functions

29

Preventing your subject from being out of focus

It may be difficult to get your subject in focus when:

there is little contrast between the subject and background -

(When your subject is wearing a colour of clothing that is similar to the

background)

the light source behind the subject is too bright

-

the subject is shiny -

the subject includes horizontal patterns, such as blinds -

the subject is not positioned in the centre of the frame -

Use the focus lock

Half-press [Shutter] to focus. When the subject is in focus,

you can reposition the frame to change the composition.

When you are ready, press [Shutter] to take your photo.

When you take photos in low lightt

Turn on the flash.

(p. 45)

When subjects are moving fastt

Use the continuous

or motion capture

function. (p. 59)

Shooting modes …………………………………………… 31

Using the Smart Auto mode ……………………………… 31

Using the Scene mode ……………………………………… 32

Using the Beauty Shot mode ……………………………… 33

Using the frame guide ……………………………………… 34

Using the Children mode …………………………………… 34

Adjusting the exposure in the Night mode ………………… 35

Using the DUAL IS mode …………………………………… 36

Using the Program mode …………………………………… 36

Taking a self-portrait shot …………………………………… 37

Recording a video …………………………………………… 37

Recording voice memos ………………………………… 39

Recording a voice memo …………………………………… 39

Adding a voice memo to a photo ………………………… 39

Extended functions

Learn how to take a photo by selecting a mode and how to

record a video or voice memo.

Extended functions

31

Shooting modes

Take photos or record videos by selecting the best shooting mode for the conditions.

Icon Description

Appears when taking photos of landscapes at night.

This is available only when the flash is off.

Appears when taking portraits at night.

Appears when taking photos of landscapes with

backlighting.

Appears when taking portraits with backlighting.

Appears when taking portraits.

Appears when taking close-up photos of objects.

Appears when taking close-up photos of text.

Appears when taking photos of sunsets.

Appears when taking photos of clear skies.

Appears when taking photos of forested areas.

Appears when taking close-up photos of colourful

subjects.

Appears when taking close-up portraits of people.

Appears when the camera and subject are stable for

a while.

Appears when taking photos of actively moving

subjects.

Using the Smart Auto mode

In this mode, your camera automatically chooses the appropriate

camera settings based on a detected type of scene. It will be

helpful if you are not familiar with the camera settings for various

scenes.

In Shooting mode, select

1

a



S

.

Align your subject in the frame.

2

The camera selects a scene automatically. An appropriate t

mode icon will appear at the top left of the screen.

Icon Description

Appears when taking photos of landscapes.

Appears when taking photos of bright backgrounds.

Extended functions

32

Shooting modes

Select a scene.

2

Scene

This mode allows you to choose an appropriate scene for a

variety of situations.

For the t Beauty Shot mode, see “Using the Beauty Shot

mode” on page 33.

For the t Frame Guide mode, see “Using the frame guide” on

page 34.

For the t Night mode, see “Adjusting the exposure in the Night

mode” on page 35.

For the t Children mode, see “Using the Children mode” on

page 34.

Align your subject in the frame and half-press [

3

Shutter]

to focus.

Press [

4

Shutter] to take the photo.

Half-press [

3

Shutter] to focus.

Press [

4

Shutter] to take the photo.

If the camera does not recognise a proper scene mode, t

S

will not

change and the default settings will be used.

Even if there is a face detected, the camera may not select a portrait t

mode depending on the subject's position or lighting.

The camera may not select the correct scene depending on shooting t

environments, such as camera shake, lighting and distance to the

subject.

Even if you use a tripod, the t mode may not be detected depending

on the subject's movement.

Using the Scene mode

Take a photo with options preset for a specific scene.

In Shooting mode, select

1

a



s

.

Extended functions

33

Shooting modes

To hide facial imperfections, select

3

f

 an

option.

Select a higher setting to hide a greater number of t

imperfections.

Level 2

Align your subject in the frame and half-press [

4

Shutter]

to focus.

Press [

5

Shutter] to take the photo.

The focus distance will be set to Auto Macro.

Using the Beauty Shot mode

Take a photo of a person with options to hide facial imperfections.

In Shooting mode, select

1

a



s

 .

To make the subject's skin tone appear lighter (face

2

only), select

f

 an option.

Select a higher setting to make skin tone appear lighter.t

Level 2

Extended functions

34

Shooting modes

Using the Children mode

In this mode, you can draw children’s attention to the camera by

showing a short animation on the front display.

In Shooting mode, select

1

a



s

 .

An animation will play.t

If the front display is turned off, tap the front display to turn it t

on.

Align your subject in the frame and half-press [

2

Shutter].

Press [

3

Shutter] to take the photo.

You can download animations from the website.

Visit www.samsung.com or www.samsungcamera.com for more information.

Using the frame guide

When you want another person to take a photo of you, you can

compose the scene with the frame guide feature. The frame

guide will help the other person take a photo of you by showing

the part of the pre-composed scene.

In Shooting mode, select

1

a



s

 .

Align your subject in the frame and press [

2

Shutter].

Transparent guides will appear on the left and right of the t

frame.

Cancel Frame: Back

Ask another person to take a photo.

3

The person must align the subject in the frame by using the t

guides, and then press [Shutter] to take the photo.

To cancel the guides, select

4

.

Extended functions

35

Shooting modes

Select

4

f

 Shutter Speed.

1.0 2.0 4.0 8.0 16.0

Shutter

Speed

Aperture

Select a value to adjust the shutter speed and select

5

.

Align your subject in the frame and half-press [

6

Shutter]

to focus.

Press [

7

Shutter] to take the photo.

Use a tripod to prevent your photos from blurring.

Adjusting the exposure in the Night mode

In the Night mode, you can catch brief flashes of light as curved

streaks by extending the exposure. Use a slow shutter speed

to extend the time until the shutter closes. Increase the aperture

value to prevent overexposure.

In Shooting mode, select

1

a



s

 .

Select

2

f

 Aperture.

Aperture Shutter

Speed

Select an option.

3

Extended functions

36

Shooting modes

Using the Program mode

Set various options (except for shutter speed and aperture value)

in the Program mode.

In Shooting mode, select

1

a



p

.

Set options. (For a list of options, refer to “

2

Shooting

options.”)

Align your subject in the frame and half-press [

3

Shutter]

to focus.

Press [

4

Shutter] to take the photo.

Using the DUAL IS mode

Reduce camera shake and prevent blurred photos with Optical

and Digital Image Stabilisation functions.

Before correction After correction

In Shooting mode, select

1

a



d

.

Align your subject in the frame and half-press [

2

Shutter]

to focus.

Press [

3

Shutter] to take the photo.

The digital zoom will not work in this mode.t

The camera will correct photos optically only when you take them with t

a light source that is brighter than fluorescent light.

If your subject is moving rapidly, the photo may be blurry.t

Set the Optical Image Stabilisation option to reduce camera shake in t

different shooting modes. (p. 27)

Extended functions

37

Shooting modes

Half-press [

4

Shutter] or select on the touch screen to

take another photo.

You can use this function when the front display option is set to t .

(p. 23)

If you use this function, you cannot set face detection options.t

The focus frame to detect faces will not appear in the shooting mode t

that does not support face detection options.

You can tap the front display to turn it on or off.t

Recording a video

Record videos of up to 20 minutes in length in high definition. The

recorded video is saved as an H.264 (MPEG-4.AVC) file.

H.264 (MPEG-4 part10/AVC) is a high-compression video format t

established by international standard organisations ISO/IEC and ITU-T.

When the Optical Image Stabilisation (t ) is activated, your video

may be recorded with the OIS operation sound.

In Shooting mode, select

1

a



v

.

Taking a self-portrait shot

Take photos of yourself conveniently using the front display.

In Shooting mode, tap the front display to turn it on.

1

Your camera will detect your face automatically and display a t

frame to indicate the detected face.

The camera automatically releases the shutter when it detects t

a smiling face.

Half-press [

2

Shutter] to focus.

Press [

3

Shutter] to take the photo.

Extended functions

38

Shooting modes

Set other options as desired. (For options, refer to

4

“Shooting options.”)

Press [

5

Shutter] to start recording.

Press [

6

Shutter] again to stop recording.

To pause recording

The camera allows you to pause temporarily while recording a

video. With this function, you can record your favourite scenes as

a single video.

Select to pause while recording. Select to resume.

Stop: Shutter

Select

2

f

 a frame rate (the number of frames

per second).

As the number of frames increases, action appears more t

natural, but the file size is increased.

30 FPS

is available only when the video resolution is 320 x 240.

Select

3

f



>

 a sound option.

Option Description

Off: Record a video without sound.

On: Record a video with sound. (While you are

zooming, sound recording will be interrupted.)

Extended functions

39

Recording voice memos

Learn how to record a voice memo that you can play back at any time. You can add a voice memo to a photo as a short reminder of

shooting conditions.

You will get the best sound quality when recording 40 cm away from the camera.

apsd

Adding a voice memo to a photo

In Shooting mode, select

1

f



>

  .

Memo

Align your subject in the frame and take a photo.

2

You will begin recording a voice memo right after taking the t

photo.

Record a short voice memo (10 seconds maximum).

3

Press [t Shutter] to stop recording a voice memo.

Recording a voice memo

In Shooting mode, select

1

f



>

  .

Record

Press [

2

Shutter] to record.

Select t to pause and to resume.

The available recording time will be displayed on the top of t

the screen.

You can record voice memos of up to 10 hours in length.t

Press [

3

Shutter] to stop.

Select

4

to switch to Shooting mode.

Selecting a resolution and quality ………… 41

Selecting a resolution ………………………… 41

Selecting image quality ………………………… 42

Using the timer ……………………………… 43

Shooting in the dark ………………………… 45

Preventing red-eye …………………………… 45

Using the flash ………………………………… 45

Adjusting the ISO speed ……………………… 46

Changing the camera’s focus ……………… 47

Using macro …………………………………… 47

Using auto focus ……………………………… 47

Using smart touch focus ……………………… 48

Using one touch shooting …………………… 49

Adjusting the focus area ……………………… 49

Using face detection ………………………… 50

Detecting faces ………………………………… 50

Taking a smile shot …………………………… 51

Detecting eye blinking ………………………… 51

Using smart face recognition ………………… 52

Registering faces as your favourites (My Star) 53

Adjusting brightness and colour ………… 54

Adjusting the exposure manually (EV) ………… 54

Compensating for backlighting (ACB) ………… 55

Changing the metering option ………………… 56

Selecting a light source (White balance) ……… 57

Using burst modes ………………………… 59

Improving your photos ……………………… 60

Applying photo styles ………………………… 60

Defining your own RGB tone ………………… 60

Adjusting your photos ………………………… 61

Shooting options

Learn about the options you can set in Shooting mode.

Shooting options

41

Selecting a resolution and quality

Learn how to change the image resolution and quality settings.

Option Description

4000 X 3000: Print on A1 paper.

3984 X 2656: Print on A2 paper in wide ratio (3:2).

3840 X 2160: Print on A2 paper in panorama ratio

(16:9) or play back on an HDTV.

3264 X 2448: Print on A3 paper.

2560 X 1920: Print on A4 paper.

2048 X 1536: Print on A5 paper.

1920 X 1080: Print on A5 paper in panorama ratio

(16:9) or play back on an HDTV.

1024 X 768: Attach to an email.

Selecting a resolution

As you increase the resolution, your photo or video will include

more pixels, so it can be printed on larger paper or displayed on

a larger screen. When you use a high resolution, the file size will

also increase.

When taking a photo:

In Shooting mode, select

1

f



>

 .

(In some modes, select

f

 .)

Select an option.

2

3840 X 2160

Sapsdv

Shooting options

42

Selecting a resolution and quality

When recording a video:

In the

1

v

mode, select

f

 .

Select an option.

2

1280 X 720 HQ

Option Description

1280 X 720 HQ: Play back high-quality files on an

HDTV.

1280 X 720: Play back on an HDTV.

640 X 480: Play back on a general TV.

320 X 240: Post on a web page.

Selecting image quality

Photos you take are compressed and saved in JPEG format.

Higher quality images will result in larger sizes.

In Shooting mode, select

1

f



>

 .

(In some modes, select

f

 .)

Select an option.

2

Fine

Option Description

Super Fine

Fine

Normal

apsd

Shooting options

43

Using the timer

Learn how to set the timer to delay shooting.

Sapsdv

Press [

3

Shutter] to start the timer.

The AF-assist light/timer lamp blinks. The camera will t

automatically take a photo at the specified time.

The front display will start the countdown a few seconds t

before shooting. Tap the front display to turn it on or off.

Half-press [

4

Shutter] or select on the touch screen to

take another photo.

Select the timer icon or press [t Shutter] to cancel the timer.

Depending on the selected face defection option, the timer is not t

available or some timer options are not available.

In Shooting mode, select

1

.

Select an option.

2

Off

Option Description

Off: The timer is not active.

10 Sec: Take a photo in 10 seconds.

2 Sec: Take a photo in 2 seconds.

Double: Take a photo in 10 seconds and take another

in 2 seconds.

Motion Timer: Detect your movement and then take

a photo. (p. 44)

The options may differ depending on the shooting mode.

Shooting options

44

Using the timer

Pose for your photo while the AF-assist light/timer lamp

5

is blinking.

The AF-assist light/timer lamp will stop blinking just before the t

camera automatically takes a photo.

The motion timer may not work when:

you are more than 3 m away from the camerat

your movements are too subtlet

there is too much light or backlightt

Using the motion timer

In Shooting mode, select

1

 .

Press [

2

Shutter].

Stand within 3 m from the camera within 6 seconds after

3

pressing [Shutter].

Make a motion, such as waving your arms, to activate

4

the timer.

The AF-assist light/timer lamp will start to blink rapidly when t

the camera detects you.

The detection range of

the motion timer

Shooting options

45

Shooting in the dark

Learn how to take photos at night or in low light conditions.

Using the flash

Use the flash when taking photos in the dark or when you need

more light on your photos.

In Shooting mode, select

1

.

Select an option.

2

Auto

Option Description

Off:

The flash will not fire.t

Camera shake warning (t ) will be displayed when

shooting in low light.

Auto: The camera will select a proper flash setting for

the detected scene in the

S

mode.

Auto: The flash fires automatically when the subject or

background is dark.

Saps

Preventing red-eye

If the flash fires when you take a photo of a person in the dark, a

red glow may appear in the eyes. To prevent this, select Red-eye

or Red-eye Fix.

aps

Shooting options

46

Shooting in the dark

Adjusting the ISO speed

The ISO speed is the measure of a film’s sensitivity to light as

defined by the International Organisation for Standardisation (ISO).

The higher ISO speed you select, the more sensitive to light your

camera becomes. With a higher ISO speed, you can get a better

photo without using the flash.

In Shooting mode, select

1

f

 .

Select an option.

2

Select t to use an appropriate ISO speed based on the

brightness of the subject and lighting.

Auto

The higher ISO speed you select, the more image noise you may get.

p

Option Description

Red-eye*:

The flash fires when the subject or background is t

dark.

The camera reduces red-eyes.t

Fill in:

The flash always fires.t

Light intensity is adjusted automatically.t

Slow Sync:

The flash fires and the shutter stays open longer.t

Select this when you want to capture ambient light t

to reveal more details in the background.

Use a tripod to prevent your photos from blurring.t

Red-eye Fix*:

The flash fires when the subject or background is t

dark.

The camera corrects red-eyes through its advanced t

software analysis.

The options may differ depending on the shooting mode.

* There is an interval between two bursts of the flash. Do not move until

the flash fires a second time.

Flash options are not available if you set burst options or select t Blink

Detection.

Make sure that your subjects are within the recommended distance t

from the flash. (p. 102)

If there is reflected light or much dust in the air, tiny spots may appear t

on your photo.

Shooting options

47

Changing the camera’s focus

Learn how to adjust the camera's focus according to your subjects.

Using auto focus

To take sharp photos, select the appropriate focus according to

your distance from the subject.

In Shooting mode, select

1

.

Select an option.

2

Normal (AF)

Option Description

Normal (AF): Focus on a subject farther than 80 cm.

Auto Macro: Focus on a subject farther than 5 cm

(farther than 50 cm when using zoom).

Macro: Focus on a subject 5 - 80 cm (50 - 80 cm

when using zoom).

Super Macro: Focus on a subject between 3 to 8 cm

(unavailable when using zoom).

The options may differ depending on the shooting mode.

apdv

Using macro

Use macro to take close-up photos of subjects, such as flowers

or insects. Refer to macro options in “Using auto focus.”

Try to hold the camera very still to prevent blurry photos.t

Turn off the flash if the distance to the subject is less than 40 cm.t

apdv

Shooting options

48

Changing the camera’s focus

If you do not touch any area on the screen, the focus frame will t

appear in the centre of the screen.

Tracking a subject may fail when:t

the subject is too small or the subject moves -

the subject is backlit or you are shooting in a dark place -

colours or patterns on the subject and the background are the -

same

the camera shakes excessively -

In these cases, the focus frame will appear as a white single-line

frame.

If the camera fails to track the subject, you must reselect the subject t

to track.

If the camera fails to fix the focus, the focus frame will change to a red t

single-line frame.

If you use this function, you cannot set face detection and photo style t

options.

Using smart touch focus

Smart Touch AF allows you to track and auto focus on your

subject, even when you are moving.

In Shooting mode, select

1

f

  .

Touch the subject you want to track in the touch area

2

(indicated by a frame).

A focus frame will appear on the subject and will follow the t

subject as you move the camera.

The white frame means that your camera is tracking the t

subject.

The green frame means that your subject is in focus when you t

half-press [Shutter].

apsd

Shooting options

49

Changing the camera’s focus

Adjusting the focus area

You can get clearer photos by selecting an appropriate focus

area according to your subject’s location in the scene.

In Shooting mode, select

1

f

 .

Select an option.

2

Center AF

Option Description

Center AF: Focus on the centre (suitable when

subjects are located in the centre).

Multi AF: Focus on one or more of 9 possible areas.

One Touch Shooting: Focus on the subject by

touching the image on the screen. Touch and hold the

subject to take the photo.

Smart Touch AF: Focus on and track the subject that

you touch on the screen. (p. 48)

The options may differ depending on the shooting mode.

apsd

Using one touch shooting

You can focus on your subject and take a photo with a touch of

your finger.

In Shooting mode, select

1

f

  .

Touch a subject to focus.

2

Touch and hold the subject to take the photo.

3

Touch and hold until the level indicator fills up. t

When you use face detection, you should touch and hold the image of

detected face. If you touch and hold any other area, the frame to detect faces

will change to a normal frame.

apsd

Shooting options

50

Using face detection

If you use face detection options, your camera can automatically detect a human face. When you focus on a human face, the camera

adjusts the exposure automatically. Take photos quickly and easily by using Blink Detection to detect closed eyes or Smile Shot to

capture a smiling face. You can also use Smart Face Recognition to register faces and prioritise the focus on them.

apsd

Detecting faces

Your camera automatically detects human faces (up to 10 human

faces).

In Shooting mode, select f   . The nearest face

appears in a white focus frame and the rest of the faces appear in

gray focus frames.

The closer you are to the subject, the quicker your camera will detect t

faces.

If you want to focus faces in gray focus frames, touch them to focus.t

When you use the burst option, the detected faces may not be t

registered.

In some scene modes, face detection is unavailable.t

Face detection may not be effective when:t

the subject is far from the camera (The focus frame will appear -

orange for Smile Shot and Blink Detection)

it is too bright or too dark -

the subject is not facing the camera -

the subject is wearing sunglasses or a mask -

the subject is in backlighting or the lighting condition is unstable -

the subject’s facial expression changes remarkably -

Face detection is not available when using a photo style.t

When you use the face detection option, the digital zoom will not t

work.

Depending on the selected face defection option, the timer is not t

available or some timer options are not available.

Depending on the selected face defection option, some burst options t

are not available.

When you take photos of detected faces, they will be registered in t

the face list.

You can view registered faces in order of priority in Playback mode. t

(p. 66) Even though faces are registered successfully, they may not be

classified in Playback mode.

The detected face in Shooting mode may not appear in the face list t

or Smart Album.

Shooting options

51

Using face detection

Detecting eye blinking

If your camera detects closed eyes, it will automatically take 2

photos in succession.

In Shooting mode, select f   .

Hold your camera still while “t Capturing” is displayed on the screen.

When blink detection fails, “t Picture taken with eyes closed.”

message appears. Take another photo.

Taking a smile shot

The camera automatically releases the shutter when it detects a

smiling face.

In Shooting mode, select f   . When your subject

smiles broadly, your camera can detect the smile more easily.

Shooting options

52

Using face detection

The camera may recognise and register faces incorrectly depending t

on lighting conditions, remarkable changes in the subject's pose or

face, and whether or not the subject is wearing glasses.

The camera can automatically register up to 14 faces. If the camera t

recognises a new face when there are 14 registered faces, it will

replace the face in the lowest priority with the new one.

The camera can detect up to 10 faces and register 5 faces in one t

scene.

Using smart face recognition

The camera automatically registers faces that you frequently

photograph. This feature will automatically prioritise the focus

on those faces and favourite faces. This feature is available only

when you use a memory card.

In Shooting mode, select f   . The nearest face

appears in a white focus frame and the rest of the faces appear in

gray focus frames.

t : Indicate favourite faces

(To register favourite faces, see page 53).

t : Indicate faces that the camera automatically registers.

Shooting options

53

Using face detection

Select

3

to register the face as one of your favourites.

Select

4

when the face list appears.

Your favourite faces are indicated with a t on the face list.

You can register up to 6 favourite faces.t

The flash option will be set to t Off.

If you register the same face twice, you can delete one of the faces t

in the face list.

Viewing your favourite faces

In Shooting mode, select

f

  .

Select t to change the ranking of your favourite faces.

See page 65 for more information about the face list.

Registering faces as your favourites (My Star)

You can register your favourite faces to prioritise the focus and

exposure on those faces. This feature is available only when you

use a memory card.

In Shooting mode, select

1

f

  .

Align your subject and press [

2

Shutter] to register the

face.

You can register up to 5 photos for one face. For better t

recognition of the face, take photos of the left, right, and front

of the subject's face.

Shooting options

54

Adjusting the exposure manually (EV)

Depending on the intensity of the ambient light, your photos

may be too bright or dark. In these cases, you can adjust the

exposure to get a better photo.

Darker (-) Neutral (0) Brighter (+)

In Shooting mode, select

1

f

 .

Select a value to adjust the exposure.

2

+: brighter, -: darkert

-2 -1 0 +2-2 -

1

0

0

+

2+1

EV

pdv

Adjusting brightness and colour

Learn how to adjust the brightness and colour for better image quality.

Select

3

.

The adjusted exposure value will appear as shown below.t

Once you adjust the exposure, the setting will remain the same. You t

may need to change the exposure value later to avoid overexposure

or underexposure.

If you cannot decide on an appropriate exposure, select t AEB (Auto

Exposure Bracket). The camera takes photos with different exposures:

normal, underexposed, and overexposed. (p. 59)

Shooting options

55

Adjusting brightness and colour

Option Description

Off: ACB is off.

On: ACB is on.

The ACB feature is always on in the t

a

mode.

This feature is not available when t Continuous, Motion Capture, or

AEB is in use.

Compensating for backlighting (ACB)

When the light source is behind your subject or there is high

contrast between your subject and the background, your subject

is likely to appear dark in the photo. In this case, set the Auto

Contrast Balance (ACB) option.

Without ACB With ACB

In Shooting mode, select

1

f



>

 .

Select an option.

2

Off

p

Shooting options

56

Adjusting brightness and colour

Option Description

Spot:

Your camera measures only the light intensity of the t

very centre of the frame.

If a subject is not in the centre of the scene, your t

photo may be improperly exposed.

Suitable for a subject with backlighting.t

Center-weighted:

Your camera averages the meter reading of the t

entire frame with emphasis placed on the centre.

Suitable for photos with subjects in the centre of t

the frame.

Changing the metering option

The metering mode refers to the way in which a camera

measures the quantity of light. The brightness and lighting of your

photos will vary depending on the metering mode you select.

In Shooting mode, select

1

f



>

 .

(In the

v

mode, select

f

 .)

Select an option.

2

Multi

Option Description

Multi:

Your camera divides the scene into several areas, t

and then measures the light intensity of each area.

Suitable for general photos.t

pdv

Shooting options

57

Adjusting brightness and colour

Auto WB

Icon Description

Auto WB: Use automatic settings depending on the

lighting conditions.

Daylight: Select when taking outdoor photos on a

sunny day.

Cloudy: Select when taking outdoor photos on a

cloudy day or in shadows.

Fluorescent_H: Select when shooting under a

daylight fluorescent or three-way fluorescent light.

Fluorescent_L: Select when shooting under white

fluorescent light.

Tungsten: Select when taking indoor photos under

incandescent bulbs or halogen lamps.

Custom Set: Use your pre-defined settings. (p. 58)

Selecting a light source

(White balance)

The colour of your photo depends on the type and quality of the

light source. If you want the colour of your photo to be realistic,

select an appropriate lighting condition to calibrate the white

balance, such as Auto WB, Daylight, Cloudy, or Tungsten.

Auto WB Daylight

Cloudy Tungsten

In Shooting mode, select

1

f

 .

Select an option.

2

pdv

Shooting options

58

Adjusting brightness and colour

Defining your own white balance

You can customise the white balance by taking photos of a white

surface, such as a piece of paper. This will help you to match

the colours in your photo with the actual scene according to your

lighting condition.

In Shooting mode, select

1

f



 .

Aim the lens at a piece of white paper.

2

Press [

3

Shutter].

Shooting options

59

Using burst modes

It can be difficult to take photos of fast-moving subjects or capture natural facial expressions and gestures of your subjects in photos.

In these cases, select one of the burst modes.

ps

Option Description

Motion Capture: While you are pressing [Shutter],

the camera takes VGA photos (6 photos per second;

maximum of 30 photos).

AEB:

Take 3 photos with different exposures: normal, t

underexposed, and overexposed.

Use a tripod to prevent blurry photos.t

The options may differ depending on the shooting mode.

You can use the flash and timer and ACB only when you select t

Single.

When you select t Motion Capture, the resolution will be set to

VGA and the ISO speed will be set to Auto.

Depending on the selected face defection option, some burst t

options are not available.

In Shooting mode, select

1

f



>

 .

Select an option.

2

Single

Option Description

Single: Take a single photo.

Continuous:

While you are pressing [t Shutter], the camera takes

photos continuously.

The maximum number of photos depends on the t

capacity of your memory card.

Shooting options

60

Improving your photos

Learn how to improve your photos by applying photo styles or colours, or make some adjustments.

Defining your own RGB tone

In Shooting mode, select

1

f



>

(once or twice)  

 .

Select a colour (R: Red, G: Green, B: Blue).

2

Adjust the amount of the selected colour.

3

Custom RGB

Select

4

.

Applying photo styles

Apply different styles to your photos, such as Soft, Vivid, or

Forest.

Soft Vivid Forest

In Shooting mode, select

1

f



>

(once or twice)  .

Select an option.

2

Select t to define your own RGB tone.

Normal

Depending on the selected photo style, you may not set the face

detection and image adjustment options.

apsdv

Shooting options

61

Improving your photos

Contrast option Description

-Decrease the colour and brightness.

+Increase the colour and brightness.

Saturation option Description

-Decrease the saturation.

+Increase the saturation.

Select 0 if you do not want to apply any effects (suitable for printing).

Adjusting your photos

Adjust the sharpness, saturation, and contrast of your photos.

In Shooting mode, select

1

f



>

(twice)  .

Select an adjustment option.

2

t : Sharpness

t : Contrast

t : Saturation

Select a value to adjust the selected item.

3

-2 -1 +2

-

2

-1

+

2+10

Sharpness

Sharpness option Description

-Soften the edges on your photos (suitable

for editing the photos on your computer).

+

Sharpen the edges to improve the clarity

of your photos. This may also increase the

noise on your photos.

p

Playing back ………………………………… 63

Starting Playback mode ……………………… 63

Viewing photos ………………………………… 69

Playing a video ………………………………… 71

Playing a voice memo ………………………… 72

Editing a photo ……………………………… 74

Rotating a photo ……………………………… 74

Resizing photos ……………………………… 74

Editing colour ………………………………… 75

Defining your own RGB tone ………………… 75

Applying a special effect ……………………… 76

Correcting exposure problems ……………… 76

Editing photos of portraits …………………… 77

Creating a print order (DPOF) ………………… 78

Viewing files on a TV ………………………… 79

Transferring files to your computer

(for Windows) ………………………………… 80

Transferring files using Intelli-studio …………… 81

Transferring files by connecting the camera

as a removable disk …………………………… 83

Disconnecting the camera (for Windows XP) … 84

Transferring files to your computer

(for Mac) ……………………………………… 85

Printing photos with a photo printer

(PictBridge) …………………………………… 86

Playback/Editing

Learn how to play back photos, videos, or voice memos and edit photos or videos. Also, learn how to

connect your camera to your photo printer, TV, or HDTV.

Playback/Editing

63

Playing back

Learn actions to play back photos, videos, or voice memos, and managing files.

You can also view files by tilting the camera. t

(Motion recognition may not work well if you hold the camera

parallel to the ground.)

To deactivate this function, select t

M



.

Gesture

View  Off in Playback mode.

If you want to view files stored in the internal memory, remove your t

memory card.

The camera will not properly play back files that are too large or those t

taken with cameras from other manufacturers.

Starting Playback mode

View photos or play videos and voice memos stored in your

camera.

Press [

1

P

].

The most recent file you have taken or recorded will be t

displayed.

If the camera is off, it will turn on.t

Draw a horizontal bar left or right to scroll through files.

2

Select t

<

to view the previous file. Hold to view files quickly.

Select t

>

to view the next file. Hold to view files quickly.

Playback/Editing

64

Playing back

Start a slide show (p. 70)

Motion recognition may not work well if you hold the camera parallel to the

ground, as shown below.

Selecting a menu using motion recognition

Your camera features a built-in motion sensor that allows you to

quickly select a menu by tilting the camera.

In Playback mode, tilt the camera while touching and

holding .

Set the current photo as your favourite photo*

( will appear on the top of the file.)

Lock or unlock the current file

( will appear on the top of the file.)

* You cannot set files as favourites for:

videos or voice memos -

photos with errors or locked photos -

photos taken with cameras from other manufacturers -

photos taken using the motion capture option set -

photos that are too large for the available memory -

Playback/Editing

65

Playing back

Icon Description

Select a display type (p. 24)

Select a menu using motion recognition (p. 64)

M

Playback and settings menus

Playback time of videos or voice memos

Play videos or voice memos

(Video p. 71/Voice memo p. 72)

Ranking your favourite faces

You can change the ranking of your favourite faces or delete

them. This feature is available only when you use a memory card.

In Playback mode, select

1

.

1/2

1

2

3

4

5

6

Face List

Select t to cancel your favourite faces.

Select t to view your favourite faces or view all faces.

Display in Playback mode

Icon Description

Photo includes a voice memo

v

Video file

Print order has been set (DPOF)

Protected file

Photo includes a registered face; Available only when you

use a memory card

Favourite file

Folder name – File name

Open the face list (p. 65); Available only when you use a

memory card

Delete files (p. 68)

Play a slide show (p. 70)

Edit photos (p. 74)

Information

Playback/Editing

66

Playing back

Option Description

Type View files by the file type.

Date View files by the date they were saved.

Color View files by the dominant colour of the image.

Week View files by the weekday they were saved.

Favorite View your favourite files.

Face View files by recognised faces and favourite

faces. (Up to 20 people)

It may take some time for the camera to open Smart Album or to change

the category and reorganise files.

Select a date, file type, weekday, colour, or face.

2

You can also touch and hold t

<

or

>

to scroll through dates,

file types, weekdays, colours, or faces.

Select

3

<

or

>

to scroll through files.

Select

4

to return to the normal view.

Once you select a category and a menu that displays thumbnails (such as

deleting multiple files or protecting selected files), the camera will display all files

sorted by category or only those that match the category option.

Select

2

 a face.

1

2

3

4

Edit Ranking

Select

3

,

or

.

to change the ranking of the face and

select .

Viewing files by category in Smart Album

View and manage files by categories, such as date, file type, or

week.

In Playback mode, select

1

  a category.

You can also access Smart Album by pushing [t Zoom] left.

29 61720

2009. 7. 1

Type

Date

Color

Week

Favorite

Face

Playback/Editing

67

Playing back

Protecting files

Protect your files from accidental deletion.

To select and protect files,

In Playback mode, select

1

M

.

Select

2

Protect Select.

Select files you want to protect.

3

Select t to select all files.

Select t to cancel your selection.

Select

4

.

Viewing files as thumbnails

Scan thumbnails of files.

In Playback mode, push [Zoom] left to display 9 or 16

thumbnails (push [Zoom] right to return to the previous

mode).

29 61720

2009. 7. 1

To Do this

Scroll through files Select

<

or

>

.

View a file Select a thumbnail.

Delete files Select or drag a file to . (p. 68)

Select a category Select .

Playback/Editing

68

Playing back

To delete all files,

In Playback mode, select

1

M

.

Select

2

Delete  All  Yes.

Alternate way to delete a file

While viewing a file in Playback mode, draw an X on the

screen.

To protect all files,

In Playback mode, select

1

M

.

Select

2

Protect All Lock.

Deleting files

Delete single files or all files at once. You cannot delete protected

files.

To delete a single file,

In Playback mode, select a file

1

 .

Select

2

Yes to delete the file.

To delete multiple files,

In Playback mode, select

1

 Multiple Delete.

Select files you want to delete.

2

Select t to select all files on the current screen.

Select t to cancel your selection.

Select

3

 Yes.

Playback/Editing

69

Playing back

Copying files to the memory card

You can copy files from the internal memory to a memory card.

In Playback mode, select

1

M

.

Select

2

.

Copy to Card.

Select

3

Yes to copy files.

Viewing photos

View a photo by changing the orientation by gesture or zooming

in on part of a photo or view photos as a slide show.

Rotating a photo by gesture

While viewing a single file, drag your finger as shown below to

rotate the photo 90°.

Using the recycle bin

If you activate the recycle bin, files you delete will be sent to the

recycle bin instead of being deleted permanently. This applies to

single files or selected files only–if you choose to delete all files,

those files will not be sent to the recycle bin.

To activate the recycle bin,

In Playback mode, select

1

M

.

Select

2

Recycle Bin  On.

To restore files from the recycle bin,

In Playback mode, select

1

M

.

Select

2

Recycle Bin  Retrieve.

This function does not work for videos or voice memos.t

It may take longer to delete files when using the recycle bin function.t

If you format the internal memory, all files in the recycle folder will be t

deleted.

The recycle bin will hold up to 10 MB of files. Once you exceed the t

10 MB limit, the camera asks you whether to empty the recycle bin.

Select Yes to empty the recycle bin or No to delete only the current

file.

Playback/Editing

70

Playing back

Icon Description

Delete the file.

Crop the enlarged photo (it will be saved as a new file).

Go back to the original view.

Starting a slide show

You can apply effects and audio to your slide show. This function

does not work for videos or voice memos.

In Playback mode, select

1

.

Set a slide show effect.

2

Viewing files by rotating the photo automatically

You can view vertical photos in landscape view without rotating

your camera. Vertical photos will be automatically rotated to an

upright position in landscape view once you set this option and

take vertical photos.

To activate the automatic rotation,

In Shooting or Playback mode, select

1

M





.

.

Select

2

Auto Rotate  On.

Select

3

.

This option may not be effective for:

photos taken when you hold the camera parallel to the ground -

photos taken with the motion capture option set -

videos -

Enlarging a photo

In Playback mode, push [Zoom] right to enlarge a

photo (push [Zoom] left to reduce a photo).

The enlarged area and zoom ratio are indicated on the top of the

screen. The maximum zoom ratio may vary depending on the

resolution. Select arrows or draw a diagonal to move the enlarged

area.

Playback/Editing

71

Playing back

Playing a video

You can play a video, capture an image from a video, or crop a

video.

In Playback mode, select a video

1

 .

Use the following icons to control playback.

2

Icon Description

Scan backward.

/ Pause or resume playback.

Stop playback.

Scan forward.

Adjust volume or mute sound.

Option Description

Images: Select photos (up to 2,000) for your slide

show.

Play Mode: Select whether or not to loop the slide

show.

Interval: Set the interval between photos.

This will be available when t is selected in the

Effect menu.

When used with an effect option other than t , the

interval will be set to 1 sec.

Music: Select background audio.

Effect:

Select a transition effect.t

Select t for no effects.

Select

3

to start the slide show.

Touch on the screen (except for option icons) to pause the t

slide show.

Select t to switch to Playback mode.

Playback/Editing

72

Playing back

Playing a voice memo

Playing a voice memo

In Playback mode, select a voice memo

1

 .

Use the following icons to control playback.

2

Icon Description

Scan backward.

/ Pause or resume playback.

Stop playback.

Scan forward.

Adjust volume or mute sound.

Trimming a video during playback

Select

1

at the point where you want the new video to

begin and select .

Select

2

to resume playback.

Select

3

at the point where you want the new video to

end and select .

Select

4

Yes.

The original video should be at least 10 seconds long.t

The edited video will be saved as a new file.t

Capturing an image during playback

Select

1

at the point where you want to save a still

image.

Select

2

.

Select

3

Yes.

A captured image will have the same file size as the original video file and will

be saved as a new file.

Playback/Editing

73

Playing back

Playing a voice memo added to a photo

In Playback mode, select a photo that includes a voice

1

memo  .

Use the following icons to control playback.

2

Icon Description

/ Pause or resume playback.

Stop playback.

Adjust volume or mute sound.

Adding a voice memo to a photo

In Playback mode, select a photo

1



M

.

Select

2

Voice memo  On.

Press [

3

Shutter] to record a short voice memo (10

seconds maximum).

Press [t Shutter] to stop recording a voice memo.

Playback/Editing

74

Editing a photo

Perform photo editing tasks, such as rotating, resizing, eliminating red-eyes, and adjusting brightness, contrast, or saturation.

Resizing photos

In Playback mode, select a photo

1

 .

Select

2

an option.

Select t to save the photo as a start image. (p. 90)

1920 X 1080

Select

3

.

Available options differ depending on the size of the selected photo.

Edited photos will be saved as new files.t

When you edit photos that are t or larger, they will be automatically

resized to a lower resolution (except when rotating or resizing photos).

Rotating a photo

In Playback mode, select a photo

1

 .

Select

2

an option.

Left 90˚

Select

3

.

Playback/Editing

75

Editing a photo

Defining your own RGB tone

In Playback mode, select a photo

1

   .

Select a colour (R: Red, G: Green, B: Blue).

2

Adjust the amount of the colour.

3

Custom RGB

Select

4

.

Editing colour

Apply a different colour tone to the photo, such as Soft, Vivid, or

Forest.

Soft Vivid Forest

In Playback mode, select a photo

1

 .

Select

2

an option.

Select t to define your own RGB tone.

Soft

Select

3

.

Playback/Editing

76

Editing a photo

Applying a special effect

Apply special effects to the photo, such as colour filters or noise

effects.

In Playback mode, select a photo

1

 .

Select

2

an option.

Elegant

Option Description

Colour Filter: Change background colours to black

and white to make the main subject stand out.

Elegant: Apply effects to the photo to make it brighter

and softer.

Add Noise: Add noise to the photo to give it an aged

look.

Select

3

.

Correcting exposure problems

Adjust ACB (Auto Contrast Balance), brightness, contrast, or

saturation.

Adjusting an image

In Playback mode, select a photo

1

 .

Select

2

 an adjustment option.

t : Brightness

t : Contrast

t : Saturation

Select a value to adjust the selected item.

3

(-: less or +: more)

Select

4

.

Adjusting ACB (Auto Contrast Balance)

In Playback mode, select a photo

1

 .

Select

2

 .

Select

3

.

Playback/Editing

77

Editing a photo

Applying snow effect

In Playback mode, select a photo

1

 .

Select

2

 .

Snow falls around the subjects. t

Select

3

to stop snowing and select .

Applying fun effects

In Playback mode, select a photo

1

 .

Select

2

 or .

Your camera automatically detects faces.t

Option Description

Mosaic: Apply mosaic effects to the detected faces.

Highlight: Make the background blurry to draw

attention to the main subject.

Select a detected face and select

3

.

Select

4

.

If you select t or effect, the camera will detect up to 20 faces.

You can use the t effect even if the photo does not include people.

Editing photos of portraits

You can improve your photos by hiding facial imperfections and

removing red-eye or you can apply effects for fun. These effects

are only available for portraits.

Snow Mosaic Highlight

Hiding imperfections

In Playback mode, select a photo

1

 .

Select

2

 .

Select a level.

3

As the number increases, more imperfections are hidden.t

Select

4

.

Removing red-eye

In Playback mode, select a photo

1

 .

Select

2

 .

Select

3

.

Playback/Editing

78

Editing a photo

Set DPOF options.

5

Option Description

Select whether to print the photos as thumbnails.

(Select to print photos as thumbnails.)

Specify the size of the print.

Select

6

,

or

.

to set the number of copies.

Select

7

.

If you specify the print size, you can print photos only with DPOF 1.1-compatible

printers.

Creating a print order (DPOF)

Select photos to be printed and set options, such as number of

copies or paper size.

The memory card can be taken to a print shop that supports DPOF t

(Digital Print Order Format) or you can print photos directly through a

DPOF-compatible printer at home.

Wide photos may print with the left and right edges cut off, so be t

aware of the dimensions of your photos.

You cannot set the DPOF for the photos stored in the internal memory.t

In Playback mode, select

1

M

.

Select

2

.

DPOF Select.

To print all files, select t All and skip to step 5.

Select photos to print.

3

Select t to select all files.

Select t to cancel your selection.

Select

4

.

Playback/Editing

79

Viewing files on a TV

Play back photos or videos by connecting your camera to a TV using the A/V cable.

View photos or play videos using the touch screen on

8

your camera.

The touch screen will function as the controller for the TV t

screen. Locate the option you want on the TV screen and

touch where the option is located on the camera screen.

When a pointer appears on the option on the TV screen,

select on the camera screen.

On some TVs, digital noise may occur or part of an image may not t

appear.

Images may not appear centred on the TV screen depending on your t

TV settings.

You can capture photos or videos while the camera is connected t

to a TV.

In Shooting or Playback mode, select

1

M

 .

Select

2



.

(twice)Video Out.

Select a video signal output according to your country or

3

region. (p. 92)

Turn off your camera and TV.

4

Connect your camera to your TV using the A/V cable.

5

Video Audio

Turn on your TV and select the video output mode using

6

the TV remote control.

Turn on your camera and press [

7

P

].

Playback/Editing

80

Transferring files to your computer (for Windows)

Transfer files to your computer using the built-in Intelli-studio program. You can also edit files or upload files to your favourite websites.

Intelli-studio may not perform correctly on some computers, even t

when the computer meets the requirements.

If your computer does not meet the requirements, videos may not play t

correctly or it may take longer to edit videos.

Install DirectX 9.0c or above before you use the program.t

You must use Windows 2000/XP/Vista or Mac OS 10.3 or later to t

connect the camera as a removable disk.

Using a self-assembled PC or a PC and OS that are not supported may void

your warranty.

Requirements for Intelli-studio

Item Requirements

CPU Intel Pentium 4, 3.2 GHz or higher/AMD Athlon 64FX,

2.6 GHz or higher

RAM Minimum 512 MB RAM

(1 GB and above recommended)

OS Windows XP SP2 or Vista

Hard disk

capacity 250 MB or more (1 GB or more recommended)

Others

CD-ROM drivet

64 MB or greater video card (nVIDIA Geforce t

7600GT or higher/ATI X1600 series or higher

recommended)

1024 x 768 pixels, 16-bit colour display compatible t

monitor (1280 x 1024 pixels, 32-bit colour display

recommended)

USB port, Microsoft DirectX 9.0c or latert

Playback/Editing

81

Transferring files to your computer (for Windows)

Turn on the camera.

5

The computer recognises the camera automatically.t

Select a folder on your computer to save new files.

6

If your camera has no new files, the pop-up window for saving t

new files will not appear.

Select

7

Yes.

New files will be transferred to the computer.t

For Windows Vista, select Run iStudio.exe from the AutoPlay window.

Transferring files using Intelli-studio

Intelli-studio will start automatically when you connect the camera

to your computer with the USB cable.

The battery will be charged while the camera is connected to a computer with

the USB cable.

In Shooting or Playback mode, select

1

M

 .

Select

2

.

(twice)PC SoftwareOn.

Turn off the camera.

3

Connect the camera to your computer with the USB

4

cable.

You must plug the end of the cable with the indicator light (S) into

your camera. If the cable is reversed, it may damage your files. The

manufacturer is not responsible for any loss of data.

Playback/Editing

82

Transferring files to your computer (for Windows)

Using Intelli-studio

Intelli-studio is a built-in program that allows you to play back and edit files. You can also upload files to websites, such as Flickr or YouTube.

For details, select Menu  Help in the program.

If you install Intelli-studio on your computer, the program will launch more quickly. To install the program, select t Menu  Install Intelli-studio on PC.

You cannot edit files directly on the camera. Transfer files to a folder on your computer before editing.t

You cannot copy files in your computer to the camera.t

Intelli-studio supports the following formats:st

Videos: MP4 (Video: H.264, Audio: AAC), WMV (WMV 7/8/9) -

Photos: JPG, GIF, BMP, PNG, TIFF -

1

6

7

9

4

8

4

3

2 3 4

5

12

11

13

14

10

10

Playback/Editing

83

Transferring files to your computer (for Windows)

Transferring files by connecting the camera

as a removable disk

You can connect the camera to your computer as a removable

disk.

In Shooting or Playback mode, select

1

M

 .

Select

2

.

(twice) PC Software Off.

Connect the camera to your computer with the USB

3

cable.

You must plug the end of the cable with the indicator light (S) into

your camera. If the cable is reversed, it may damage your files. The

manufacturer is not responsible for any loss of data.

Icon Description

1 Open menus

2 Display files in the selected folder

3 Change to the Edit mode

4 Change to the Sharing mode (You can send files by email

or upload files to websites, such as Flickr or YouTube.)

5 Enlarge or reduce the thumbnails in the list

6 Select a file type or a category

7 View files of the selected folder on your computer

8 Copy files to the computer

9 View files of the selected folder on the camera

10

View photos in a slide show/Play videos

11

Copy new files to your computer

12

Browse folders in the connected device

13

Select folders of your computer

14

Browse folders in your computer

Playback/Editing

84

Transferring files to your computer (for Windows)

Disconnecting the camera (for Windows XP)

The way to disconnect the USB cable for Windows 2000/Vista

is similar.

If the status lamp on your camera is blinking, wait until

1

it stops.

Click

2

on the tool bar at the bottom right of your PC

screen.

Click the pop-up message.

3

Remove the USB cable.

4

The camera may not be removed safely when Intelli-studio is running.

End the program before disconnecting the camera.

Turn on the camera.

4

The computer recognises the camera automatically.t

If the camera fails to connect, a pop-up window will appear. Select

Computer.

On your computer, select

5

My computer Removable

Disk DCIM 100PHOTO.

Select the files you want and drag or save them to your

6

computer.

Playback/Editing

85

Transferring files to your computer (for Mac)

When you connect the camera to a Macintosh computer, the computer will recognise the device automatically. You can transfer files directly

from the camera to the computer without installing any programs.

Mac OS 10.3 or later is supported.

Connect your camera to a Macintosh computer with the

1

USB cable.

You must plug the end of the cable with the indicator light (S) into

your camera. If the cable is reversed, it may damage your files. The

manufacturer is not responsible for any loss of data.

Turn on the camera.

2

The computer recognises the camera automatically and a t

removable disk icon will be displayed.

Double-click the removable disk icon.

3

Transfer photos or videos to the computer.

4

Playback/Editing

86

Printing photos with a photo printer (PictBridge)

Print photos with a PictBridge-compatible printer by connecting your camera directly to the printer.

Select an option.

4

Option Description

Current Photo Print the currently selected photo. Skip to

step 6.

Selected Photos Print the photos you want.

All Photos Print all photos. Skip to step 6.

Select

5

<

or

>

to scroll to a photo to print.

Select

6

,

or

.

to set the number of copies and select

.

If you selected to print the photos you want, repeat steps 5-6 t

for all photos to print.

Select

7

Yes to confirm.

Printing starts. Select t Cancel to cancel printing.

With the printer on, connect your camera to the printer

1

with the USB cable.

Turn on your camera.

2

The printer recognises the camera automatically.t

If the camera fails to connect, a pop-up window will appear. t

Select Printer.

If your printer has the mass storage feature, you must first set the t

USB mode to Printer in the settings menu. (p. 93)

Select

3

to print.

Select t to set printing options. See “Configuring print

settings” on page 87.

Playback/Editing

87

Printing photos with a photo printer (PictBridge)

Configuring print settings

Option Description

Size: Specify the size of the print.

Layout: Create thumbnail prints.

Type: Select the type of paper.

Quality: Set the printing quality.

Date: Set to print the date.

File Name: Set to print the name of the file.

Reset: Reset the print options.

Some options are not supported by some printers.

Settings menu …………………………………………… 89

Accessing the settings menu ……………………………… 89

Sound settings ……………………………………………… 90

Display settings ……………………………………………… 90

Camera settings …………………………………………… 91

Error messages …………………………………………… 94

Camera maintenance …………………………………… 95

Cleaning your camera ……………………………………… 95

About memory cards ……………………………………… 96

About the battery …………………………………………… 97

Before contacting a service centre …………………… 99

Camera specifications …………………………………… 102

Index ………………………………………………………… 106

Appendixes

Refer to settings, error messages, specifications, and

maintenance tips.

Appendixes

89

Settings menu

Learn about various options to configure your camera's settings.

Select an option and save your settings.

3

1/2

Volume

Haptic Strength

Haptic&Sound

Shutter Sound

Start Sound

Off

Low

Medium

High

: Off

Select

4

to return to the previous screen.

Accessing the settings menu

In Shooting or Playback mode, select

1

M

.

Select a menu.

2

1/2

Volume

Haptic Strength

Haptic&Sound

Shutter Sound

Start Sound

: Medium

: Medium

: All

: 1

: Off

Icon Description

Sound settings: Set various camera sounds and

volume. (p. 90)

Display settings: Customise the display settings,

such as language and brightness. (p. 90)

Camera settings: Change the settings for the camera

system, such as memory format, default file name, and

USB mode. (p. 91)

Appendixes

90

Settings menu

Display settings

* Default

Item Description

Language Select a language for the display text.

Function

Description

Display a brief description of an option or menu.

(Off, On*)

Start Image

Set a start image to display when the camera turns

on.

Offt *: Display no start image.

Logot : Display a default image stored in the internal

memory.

User Image t : Display the image you want. (p. 74)

Only one start image will be saved in the internal t

memory.

If you select a new photo as a start image or reset t

your camera, the current image will be deleted.

Grid Line Select a type of the grid lines that help you to

compose a scene. (2 X 2*, 3 X 3, +, X)

Sound settings

* Default

Item Description

Volume Adjust the volume of any sound.

(Off, Low, Medium*, High)

Haptic Strength

Select a level of the vibration when you touch on

the screen. (Low, Medium*, High)

In low temperatures, the vibration level may feel lower

than your actual setting. It is not a malfunction.

Haptic&Sound

Select whether the camera will vibrate or sound

when you touch on the screen.

(Off, Haptic, Sound, All*)

Shutter Sound Select a sound to be emitted when pressing the

shutter button. (Off, 1*, 2, 3)

Start Sound Select a sound to be emitted when turning on your

camera. (Off*, 1, 2, 3)

AF Sound Set to emit a sound to be emitted when half-

pressing the shutter button. (Off, On*)

Appendixes

91

Settings menu

Camera settings

* Default

Item Description

Format

Format the internal memory and the memory card

(all files-including the protected files-will be deleted).

(No, Yes)

If you use a memory card used with cameras from different

manufacturers or a memory card reader, or one formatted

on a computer, your camera may read the card incorrectly.

Format the card before using it.

Reset

Reset menus and shooting options (date and time,

language, and video output settings will not be reset).

(No, Yes)

Date & Time Set the date and time and select a date format.

(Off*, yyyy/mm/dd, mm/dd/yyyy, dd/mm/yyyy)

Time Zone Select a region and set the daylight-saving time

(DST).

Item Description

Display

Brightness

Adjust the brightness of the screen.

(Auto*, Dark, Normal, Bright)

Normal is fixed in Playback mode even if Auto is selected.

Quick View

Set the duration for reviewing a captured image

before returning to Shooting mode.

(Off, 0.5 sec*, 1 sec, 3 sec)

Power Save

If you perform no operations for 30 seconds, the

camera automatically switches to Power save mode

(press any button to deactivate the Power save

mode). (Off*, On)

* Default

Appendixes

92

Settings menu

* Default * Default

Item Description

Imprint

Set whether to display the date and time on your

photos when printing. (Off*, Date, Date & Time)

The date and time will be displayed on the bottom-t

right corner of the photo in yellow.

The date and time may not be printed on some t

printer models.

If you selectt in the

s

mode, the date and

time will not be displayed.

Auto Power

Off

Set the camera to automatically turn off when you are

not using it. (Off, 1 min, 3 min*, 5 min, 10 min)

Your settings will not change after replacing the t

battery.

The camera will not automatically turn off when:t

it is connected to a computer or printer -

you are playing a slide show or videos -

you are recording a voice memo -

AF Lamp Set an assistant light to help you focus in dark places.

(Off, On*)

Item Description

File No.

Specify how to name files.

Resett : Set the file number to start from 0001 when

inserting a new memory card, formatting a memory

card, or deleting all files.

Seriest *: Set the file number to follow the previous

file number when inserting a new memory card,

formatting a memory card, or deleting all files.

The default name of the first folder is 100PHOTO and t

the default name of the first file is SAM_0001.

The file number increases one by one from t

SAM_0001 to SAM_9999.

The folder number increases one by one from t

100PHOTO to 999PHOTO.

The maximum number of files that can be stored in t

one folder is 9999.

The camera defines file names according to the t

Digital rule for Camera File system (DCF) standard.

If you change the names of files intentionally, the

camera may not play back the files.

Auto Rotate Set the camera to automatically rotate vertical photos

to view them in landscape view. (Off, On*)

Appendixes

93

Settings menu

Item Description

Video Out

Set the video signal output according to your region.

NTSCt *: USA, Canada, Japan, Korea, Taiwan,

Mexico.

PALt (supports only BDGHI): Australia, Austria,

Belgium, China, Denmark, England, Finland,

Germany, Italy, Kuwait, Malaysia, Netherlands,

New Zealand, Norway, Singapore, Spain, Sweden,

Switzerland, Thailand

USB

Set the function to use via a USB connection with a

computer or printer.

Autot *: Set your camera to select a USB mode

automatically.

Computert : Connect your camera to a computer

for transferring files.

Printert : Connect your camera to a printer for

printing files.

PC Software Set Intelli-studio to start automatically when you

connect your camera to your computer. (Off, On*)

Calibration Calibrate the screen so that your camera will properly

recognise the input.

* Default

Appendixes

94

Error messages

When the following error messages appear, try these remedies.

Error message Suggested remedies

Card Error

Turn off your camera and then turn it on again.t

Remove your memory card and insert it again.t

Format your memory card. (p. t 91)

DCF Full Error

File names do not match the DCF standard.

Transfer the files on the memory card to your

computer and format the card. (p. 91)

File Error Delete the damaged file or contact a service

centre.

Low Battery Insert a charged battery or recharge the battery.

Memory Full Delete unnecessary files or insert a new memory

card.

No Image File Take photos or insert a memory card that has

some photos.

Appendixes

95

Camera maintenance

Camera body

Wipe gently with a soft, dry cloth.

Never use benzene, thinners, or alcohol to clean the device. These t

solutions can damage the camera or cause it to malfunction.

Do not press on the lens cover or use a blower brush on the lens t

cover.

Cleaning your camera

Camera lens and touch screen

Use a blower brush to remove dust and wipe the lens gently with

a soft cloth. If any dust remains, apply lens cleaning liquid to a

piece of cleaning paper and wipe gently.

Appendixes

96

Camera maintenance

Memory card capacity

The memory capacity may differ depending on shooting scenes

or shooting conditions. These capacities are based on a 1 GB

microSDTM card:

Size Super Fine Fine Normal 60 FPS 30 FPS 15 FPS

P

h

o

t

o

s

145 281 399 - - -

166 310 436 - - -

200 363 522 - - -

209 357 531 - - -

339 630 860 - - -

526 885 1,198 - - -

873 1,455 1,909 - - -

1,697 2,037 2,350 - - -

*

V

i

d

e

o

s

----

Approx.

13' 21"

Approx.

23' 20"

----

Approx.

15' 10"

Approx.

32' 11"

----

Approx.

37' 25"

Approx.

66' 45"

---

Approx.

78' 20"

Approx.

136' 47"

Approx.

235' 02"

* The recordable time may vary if you use the zoom.

Several videos were recorded in succession to determine the total

recording time.

About memory cards

Memory cards you can use

You can use microSDTM (Secure Digital) memory cards.

Appendixes

97

Camera maintenance

Battery life

Average time /

Number of photos

Test conditions

(when the battery is fully charged)

Photos

Approx. 100 min/

Approx. 200

photos

This is measured under the following

conditions: in the

a

mode, 12M

resolution, Fine quality, OIS on.

1. Set the flash option to Fill in, take a

single shot, and zoom in or out.

2. Set the flash option to Off, take a

single shot, and zoom in or out.

3. Perform steps 1 and 2 for 30

seconds and repeat for 5 minutes.

Then turn off the camera for 1 minute.

4. Repeat steps 1 to 3.

Videos Approx. 60 min Record videos at 1280 x 720 HQ

resolution and 30 fps.

The figures above are measured by Samsung’s standards and may differ t

depending on actual usage.

Several videos were recorded in succession to determine the total recording t

time.

About the battery

Use only Samsung-approved batteries.

Battery specifications

Mode SLB-07A

Type Lithium-ion battery

Cell capacity 720 mAh

Voltage 3.7 V

Charging time

(when the camera is switched off) Approx. 150 min

Appendixes

98

Camera maintenance

Notes about charging the battery

If the indicator light is off, make sure that the battery is inserted t

correctly.

Turn off your camera when charging.t

Turn on your camera after charging the battery for more than 10 t

minutes.

Using the flash or recording videos depletes the battery quickly. t

Charge the battery until the indicator light turns green.

If the indicator light blinks in orange or does not illuminate, reconnect t

the cable, or remove the battery and insert it again.

If you charge the battery when the cable is overheated or the t

temperature is too high, the indicator light may turn orange. Charging

will start when the battery cools down.

Notes about charging with a computer connected

Use only the provided USB cable.t

The battery may not be charged when:t

you use a USB hub -

other USB devices are connected to your computer -

you connect the cable to the port on the front side of your -

computer

the USB port of your computer does not support the power output -

standard (5 V, 500 mA)

Appendixes

99

Before contacting a service centre

If you are having trouble with your camera, try these troubleshooting procedures before contacting a service centre. If you have attempted

the troubleshooting solution and are still having problems with your device, contact your local dealer or service centre.

Situation Suggested remedies

Cannot take photos

There is no space on the memory card. t

Delete unnecessary files or insert a new

card.

Format the memory card. (p. t 91)

The memory card is defective. Get a t

new memory card.

Make sure that the camera is switched t

on.

Charge the battery.t

Make sure that the battery is inserted t

correctly.

The camera freezes Remove the battery and insert it again.

The flash does not work

The flash option may be set to t Off.

(p. 45)

You cannot use the flash in the t

d

,

v

,

or some

s

modes.

The flash fires

unexpectedly

The flash may fire due to static electricity.

This is not a malfunction of the camera.

The date and time are

incorrect

Set the date and time in the display settings

menu.

The touch screen or

buttons do not work Remove the battery and insert it again.

Situation Suggested remedies

Cannot turn on the

camera

Make sure that the battery is inserted.t

Make sure that the battery is inserted t

correctly.

Charge the battery.t

The power turns off

suddenly

Charge the battery.t

Your camera may be in Power save t

mode. (p. 91)

The camera may turn off to prevent the t

memory card from being damaged due

to an impact. Turn on your camera again.

The camera is losing

battery power quickly

The battery may lose power more quickly t

in low temperatures (below 0° C). Keep

the battery warm by putting it into your

pocket.

Using the flash or recording videos t

depletes the battery quickly. Recharge

if needed.

Batteries are consumable parts that must t

be replaced over time. Get a new battery

if the battery life is diminishing quickly.

Appendixes

100

Before contacting a service centre

Situation Suggested remedies

The photo is too bright

Your photo is overexposed. Adjust the t

exposure value. (p. 54)

Turn off the flash. (p. t 45)

The photo is too dark

Your photo is underexposed.

Adjust the exposure value. (p. t 54)

Turn on the flash. (p. t 45)

Adjust the ISO speed. (p. t 46)

The TV does not

display your photos

Make sure that the camera is correctly t

connected to the external monitor with

the A/V cable.

Make sure that your memory card t

contains photos.

Your computer does

not recognise your

camera

Make sure that the USB cable is t

connected correctly.

Make sure that your camera is switched t

on.

Make sure that you are using a t

supported operating system.

Your computer

disconnects the camera

while transferring files

The file transmission may be interrupted by

static electricity. Disconnect the USB cable

and connect it again.

Situation Suggested remedies

The camera screen

works poorly

If you use your camera at very low

temperatures, it may cause the camera

screen to malfunction or discolour.

For better performance of your camera

screen, use your camera in moderate

temperatures.

The memory card has

an error

The memory card has not been reset.

Format the card. (p. 91)

Cannot play back files

If you change the name of a file, your

camera may not play the file (the name of

the file should meet the DCF standard). If

you encounter this situation, play back files

on your computer.

The photo is blurry

Make sure that the focus option you set t

is suitable for close-up shots. (p. 47)

Make sure that the subject is within t

range of the flash. (p. 102)

Make sure that the lens is clean. If not, t

clean the lens. (p. 95)

The colours in the

photo do not match the

actual scene

An incorrect white balance can create

unrealistic colour. Select the proper white

balance option to suit the light source.

(p. 57)

Appendixes

101

Before contacting a service centre

Situation Suggested remedies

Your camera cannot

play videos

You can play videos only with the Intelli-t

studio program. Install the program on

your computer. (p. 82)

Make sure that the USB cable is t

connected correctly.

Intelli-studio is not

functioning properly

End Intelli-studio and restart the program.t

You cannot use Intelli-studio on t

Macintosh computers.

Make sure that the t PC Software is set

to On in the settings menu. (p. 93)

Depending on your computer's t

specification and environments, the

program may not launch automatically.

In this case, click Start  My

Computer  Intelli-studio 

iStudio.exe on your computer.

Appendixes

102

Camera specifications

Shutter speed

Auto

t : 1/8 - 1/2,000 sec.

Program

t : 1 - 1/2,000 sec.

Night

t : 8 - 1/2,000 sec.

Fireworks

t : 2 sec.

Exposure

Control Program AE

Metering Multi, Spot, Center-weighted

Compensation ±2EV (1/3EV steps)

ISO equivalent Auto, 80, 100, 200, 400, 800, 1600, 3200

Flash

Mode Off, Auto, Red-eye, Fill in, Slow Sync, Red-eye Fix

Range Wide: 0.2 m - 3.4 m (ISO Auto)

t

Tele: 0.5 m - 2.0 m (ISO Auto)t

Recharging time Approx. 4 sec.

Shake reduction

DUAL IS [Optical Image Stabilisation (OIS) +

Digital Image Stabilisation (DIS)]

Effect

Shooting mode

Photo Style Selector

t : Normal, Soft, Vivid, Forest,

Retro, Cool, Calm, Classic, Negative, Custom RGB

Image Adjust

t : Sharpness, Contrast, Saturation

Image sensor

Type 1/2.33" (Approx. 7.79 mm) CCD

Effective pixels Approx. 12.2 mega-pixels

Total pixels Approx. 12.4 mega-pixels

Lens

Focal length Schneider-KREUZNACH lens f = 4.9 - 22.5 mm

(35 mm film equivalent: 27 - 124.2 mm)

F-stop range F3.5 (W) - F5.9 (T)

Digital zoom Still image mode: 1.0X - 5.0X

t

Play mode: 1.0X - 12.5X (depending on image size)t

Display

Type TFT LCD

Feature

Main Display: 3.0" (7.6 cm) Wide QVGA (230 K)

t

Full Touch LCD

Front Display: 1.5" (3.8 cm) 61 K TFT LCD

t

Focusing

Type

TTL auto focus (Multi AF, Center AF, Face Recognition

AF, Face Detection AF, Smart Touch AF, One Touch

Shooting)

Range

Wide (W) Tele (T)

Normal 80 cm - infinity

Macro 5 cm - 80 cm 50 cm - 80 cm

Auto Macro 5 cm - infinity 50 cm - infinity

Super Macro 3 cm - 8 cm -

Appendixes

103

Camera specifications

Playback

Type

Single image, Thumbnails, Multi slide show with music

and effects, Movie clip, Smart Album*

*Smart Album category: Type, Date, Color, Week,

Face, Favorite

Edit Resize, Rotate, Photo Style Selector , Image Adjust,

Special Effect, Face Effect

Effect

Photo Style Selector

t : Normal, Soft, Vivid, Forest,

Retro, Cool, Calm, Classic, Negative, Custom RGB

Image Adjust

t : ACB, Brightness, Contrast,

Saturation

Special Effect

t : Colour Filter, Elegant, Add Noise

Face Effect

t : Face Retouch, Red-eye Fix, Snow ,

Mosaic, Highlight

Voice recording

Voice Recording (Max. 10 hours )

t

Voice Memo in a photo (Max. 10 sec.)t

Storage

Media

Internal memory: Approx. 55 MB

t

External memory (Optional): t

microSD card (up to 4 GB guaranteed)

Internal memory capacity may not match these

specifications.

White Balance

Auto WB, Daylight, Cloudy, Fluorescent_H, Fluorescent_L, Tungsten,

Custom Set

Date Imprinting

Date & Time, Date, Off

Shooting

Photos

Modes:

t Smart Auto (Portrait, Night Portrait,

Backlight Portrait, Backlight, Landscape, White,

Motion, Tripod, Night, Macro, Macro Text, Blue Sky,

Sunset Sky, Natural Green, Natural Portrait, Macro

Colour), Auto, Program, DUAL IS, Movie, Scene

(Night, Portrait, Children, Landscape, Text,

Close Up, Sunset, Dawn, Backlight, Fireworks,

Beach & Snow, Frame Guide, Beauty Shot)

Drive

t : Single, Continuous, Motion Capture, AEB

Timer

t : 10 Sec, 2 Sec, Double, Motion Timer

Videos

Format: H.264 (Max recording time: 20 min)

t

Size: t 1280 X 720 HQ (30 FPS, 15 FPS),

1280 X 720 (30 FPS, 15 FPS), 640 X 480 (30 FPS,

15 FPS), 320 X 240 (60 FPS, 30 FPS, 15 FPS)

Frame Rate

t : 60 FPS, 30 FPS, 15 FPS

Effect:

t Photo Style Selector , White Balance

Voice

t : Off, On (sound is muted when operating the

zoom function)

Video editing (embedded): Pause during recording,

t

Still image capture, Time trimming

Appendixes

104

Camera specifications

Power source

Rechargeable

battery Lithium-ion battery (SLB-07A, 720 mAh)

The power source may differ depending on your region.

Dimensions (W x H x D)

99.8 x 59.8 x 19.1 mm

Weight

149 g (without battery and memory card)

Operating temperature

0 - 40˚ C

Operating humidity

5 - 85 %

Software

Intelli-studio

Specifications are subject to change without prior notice.

File format

Photo: JPEG (DCF), EXIF 2.21, DPOF 1.1,

t

PictBridge 1.0

Video: H.264 (MPEG-4.AVC)

t

Audio: AACt

Image size

For 1GB microSD

TM

Super Fine Fine Normal

4000 X 3000 145 281 399

3984 X 2656 166 310 436

3840 X 2160 200 363 522

3264 X 2448 209 357 531

2560 X 1920 339 630 860

2048 X 1536 526 885 1,198

1920 X 1080 873 1,455 1,909

1024 X 768 1,697 2,037 2,350

These figures are measured under Samsung’s

standard conditions and may vary depending on

shooting conditions and camera settings.

Interface

Digital output

connector USB 2.0

Audio output Mono (Internal speaker), Mono (Microphone)

Video output AV: NTSC, PAL (selectable)

DC power input

connector 20 pin, 4.2 V

Appendixes

105

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European

countries with separate collection systems)

This marking on the product, accessories or literature indicates that

the product and its electronic accessories (e.g. charger, headset, USB

cable) should not be disposed of with other household waste at the

end of their working life. To prevent possible harm to the environment

or human health from uncontrolled waste disposal, please separate

these items from other types of waste and recycle them responsibly to

promote the sustainable reuse of material resources. Household users

should contact either the retailer where they purchased this product,

or their local government office, for details of where and how they can

take these items for environmentally safe recycling. Business users

should contact their supplier and check the terms and conditions of

the purchase contract. This product and its electronic accessories

should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product

(Applicable in the European Union and other European

countries with separate battery return systems)

This marking on the battery, manual or packaging indicates that

the batteries in this product should not be disposed of with other

household waste at the end of their working life. Where marked, the

chemical symbols Hg, Cd or Pb indicate that the battery contains

mercury, cadmium or lead above the reference levels in EC Directive

2006/66. If batteries are not properly disposed of, these substances

can cause harm to human health or the environment.

To protect natural resources and to promote material reuse, please

separate batteries from other types of waste and recycle them through

your local, free battery return system.

The rechargeable battery incorporated in this product is not user

replaceable. For information on its replacement, please contact your

service provider.

This Class [B] digital apparatus complies with Canadian

ICES-003.

Samsung Eco-mark

It is Samsung’s own symbol mark is used to

effectively communicate Samsung’s environmental

friendly product activities to the consumers. The

mark represents Samsung’s continuous effort on

development of environmental conscious products.

Appendixes

106

F

Face detection

Blink detection 51

Face detection 50

Smart face recognition 52

Smile shot 51

Facial brightness 33

Facial imperfections 33

Flash

Auto 45

Fill in 46

Off 45

Red-eye 46

Red-eye fix 46

Slow sync 46

Focus area

Center AF 49

Multi AF 49

One touch shooting 49

Smart Touch AF 49

D

Date and time 91

Deleting files 68

Digital Image Stabilisation 36

Digital zoom 26

Disconnecting the device 84

Display brightness 91

Display type 24

DPOF 78

Dragging 19

DUAL IS mode 36

E

Editing 74

Enlarging 70

Error messages 94

Exposure 54

B

Battery

Charging 98

Life 97

Specifications 97

Beauty Shot mode 33

Blink detection 51

Burst

Auto Exposure Bracket

(AEB) 59

Continuous 59

Motion capture 59

C

Calibration 18, 93

Camera shake 28

Capturing an image 72

Children mode 34

Cleaning

Body 95

Display 95

Lens 95

A

ACB

in Playback mode 76

in Shooting mode 55

Adjusting

Brightness 76

Contrast

in Playback mode 76

in Shooting mode 61

Saturation

in Playback mode 76

in Shooting mode 61

Sharpness 61

AF Lamp 92

AF Sound 90

Aperture 35

Auto Contrast Balance

(ACB) 55

Auto mode 25

Index

Appendixes

107

Q

Quick View 91

R

Recording

Video 37

Voice memo 39

Recycle bin 69

Red-eye

in Playback mode 77

in Shooting mode 45

Reset 91

Resizing 74

Resolution

Photo 41

Video 42

RGB tone

in Playback mode 75

in Shooting mode 60

Rotating 69, 74

Movie mode 37

Muting

Camera 17

Video 38

O

One touch shooting 49

Optical Image Stabilisation

(OIS) 27

P

Photo quality 42

Photo styles

in Playback mode 75

in Shooting mode 60

Playback button 17

Playback mode 63

Printing photos 86

Print order 78

Program mode 36

Protecting files 67

Intelli-studio 82

ISO speed 46

L

Light source

(White balance) 57

Long time shutter 35

M

Macro 47

Maintenance 95

Memory card

Capacity 96

microSD 96

Metering

Center 56

Multi 56

Spot 56

Motion recognition

in Playback mode 64

in Shooting mode 22

Motion timer 44

Focus distance

Auto macro 47

Macro 47

Normal (AF) 47

Super macro 47

Format 91

Frame guide 34

Frame rate 38

Front display 13, 23

Function description 90

G

Gestures 20

Grid line 24, 90

H

Half-pressing 6

I

Icons 15

Imprint 92

Index

Appendixes

108

Video Out 92

Viewing files

as thumbnails 67

on TV 79

Slide show 70

Smart album 66

Voice memo

Playing 72

Recording 39

Volume 90

W

White balance 57

Z

Zooming 26

Smart Touch AF 48

Smile shot 51

Special effects

Add noise 76

Colour filter 76

Elegant 76

Start image 90

T

Timer 43

Touching 19

Touch vibration 24

Transferring files

for Mac 85

for Windows 80

V

Video

Playing 71

Recording 37

S

Scene mode 32

Self-portrait 37

Service centre 99

Settings

Accessing 89

Camera 91

Display 90

Sound 90

Shooting mode

Auto 25

DUAL IS 36

Movie 37

Program 36

Scene 32

Smart Auto 31

Shutter speed 35

Slide show 70

Smart Album 66

Smart Auto mode 31

Smart face recognition 52

Index

Please refer to the warranty that came with your product or

visit our website http://www.samsungcamera.com/ for after-

sales service or inquiries.