Samsung Un32Eh4003Fxza Users Manual

: Samsung Samsung-Un32Eh4003Fxza-Users-Manual-731959 samsung-un32eh4003fxza-users-manual-731959 samsung pdf

Open the PDF directly: View PDF .
Page Count: 2

- 2 -- 1 -

- 6 -- 5 -

- 3 -

- 7 -

- 4 -

- 8 -

Connections

HDMI OUT

HDMI OUT

AUDIO OUT

R-AUDIO-L

DVI OUT

W R

RW

W R

RW

AUDIO OUT

R-AUDIO-L

VIDEO OUT

ANT OUT

Y

R

Y

R

RBRG

R

GB

COMPONENT OUT

Y PRPB

Remote Control

✎This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.

Figures and illustrations in this User Manual are provided for reference

only and may differ from actual product appearance. Product design and

specifications may be changed without notice.

Important Warranty Information Regarding

Television Format Viewing

✎See the warranty card for more information on warranty terms.

Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height)

are primarily designed to view wide screen format full-motion video. The images

displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded

to fill the screen if your model offers this feature and the images are constantly moving.

Displaying stationary graphics and images on screen, such as the dark sidebars on

non- expanded standard format television video and programming, should be limited

to no more than 5% of the total television viewing per week. Additionally, viewing other

stationary images and text such as stock market reports, video game displays, station

logos, web sites or computer graphics and patterns, should be limited as described

above for all televisions. Displaying stationary images that exceed the above guidelines

can cause uneven aging of LED Displays that leave subtle, but permanent burned-in

ghost images in the LED picture. To avoid this, vary the programming and images, and

primarily display full screen moving images, not stationary patterns or dark bars. On LED

models that offer picture sizing features, use these controls to view different formats as

a full screen picture. Be careful in the selection and duration of television formats you

use for viewing. Uneven LED aging as a result of format selection and use, as well as

burned-in images, are not covered by your Samsung limited warranty.

• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations of the original

Limited Warranty supplied with Samsung Electronics (SAMSUNG) products, and the

requirements, conditions, exclusions and limitations contained herein, SAMSUNG

will additionally provide Warranty Repair Service in the United States on SAMSUNG

products purchased in Canada, and in Canada on SAMSUNG products purchased

in the United States, for the warranty period originally specified, and to the Original

Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized

Service Center. Along with this Statement, the Original Limited Warranty Statement

and a dated Bill of Sale as Proof of Purchase must be presented to the Service

Center. Transportation to and from the Service Center is the responsibility of the

purchaser. Conditions covered are limited only to manufacturing defects in material or

workmanship, and only those encountered in normal use of the product. Excluded, but

not limited to, are any originally specified provisions for, in-home or on-site services,

minimum or maximum repair times, exchanges or replacements, accessories, options,

upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free:

–– In the United States : 1-800-SAMSUNG (1-800-726-7864)

–– In Canada : 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture files) or still image elements (such as

TV channel logos, panorama or 4:3 image format, stock or news bars at screen bottom

etc.) on the screen. Constant displaying of still pictures can cause ghosting of LED

screen, which will affect image quality. To reduce risk of this effect, please follow below

recommendations:

• Avoid displaying the same TV channel for long periods.

• Always try to display any image on full screen, use TV set picture format menu for

best possible match.

• Reduce brightness and contrast values to minimum required to achieve desired

picture quality, exceeded values may speed up the burnout process.

• Frequently use all TV features designed to reduce image retention and screen

burnout, refer to proper user manual section for details.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to

ensure proper ventilation.

Failing to do so may result in fire or a problem with the product due to an increase in the

internal temperature of the product.

✎When using a stand or wall-mount, use parts provided by Samsung Electronics

only.

xIf you use parts provided by another manufacturer, it may result in a problem

with the product or an injury due to the product falling.

✎The appearance may differ depending on the product.

✎Be careful when you contact the TV because some parts can be somewhat hot.

Installation with a stand. Installation with a wall-mount.

4inches

4inches

4inches

4inches

4inches

4inches

4inches

Channel Menu

❑Seeing Channels

Channel List

Add, delete or set Favorite channels and use the program guide for

digital broadcasts. Select a channel in the All Channels, Added

Channels, Favorite or Programmed screen by pressing the ▲ / ▼

buttons, and pressing the ENTER

E

button. Then you can watch

the selected channel.

Added Channels

6 Air

6-1 ♥ TV #6

7-1 ♥ TV #7

8 Air

9 Air

9-1 ♥ TV #9

10 Air

10-1 ♥ TV #10

11-1 ♥ TV #11

Air ' Zoom ' Select T Tools ► Next Program

■

All Channels: Shows all currently available channels.

■

Added Channels: Shows all added channels.

■*

Favorite: Shows all favorite channels.

■

Programmed: Shows all currently reserved programs.

✎Using the remote control buttons with the Channel List

xGreen (Zoom): Enlarges or shrinks a channel number.

xYellow (Select): Selects multiple channel lists. Select desired

channels and press the Yellow button to set all the selected

channels at the same time. The

c

mark appears to the left of

the selected channels.

x

T

(Tools): Displays the Channel List option menu. (The Options

menus may differ depending on the situation.)

Channel Status Display icons

Icons Operations

c

A channel selected.

*

A channel set as a favorite.

A reserved program.

(

A program currently being broadcast.

❑Memorizing channels

Antenna (Air / Cable)

t

Before your television can begin memorizing the available channels,

you must specify the type of signal source that is connected to the

TV (i.e. an Air or a Cable system).

Auto Program

✎When selecting the Cable TV system: Selects the cable

system. STD, HRC and IRC identify various types of cable TV

systems. Contact your local cable company to identify the type

of cable system that exists in your particular area. At this point,

the signal source has been selected.

✎After all the available channels are stored, it starts to

remove scrambled channels. The Auto program menu then

reappears.

✎Press the ENTER

E

button to stop the channel store during

Auto Program.

How to Stop Auto Programming

1. Press the ENTER

E

button.

2. A message will ask Stop Auto Program? Select Yes by pressing

the ◄ or ► button.

3. Press the ENTER

E

button.

❑Other Features

Clear Scrambled Channel

This function filters out scrambled channels after Auto Program is

completed. This process may take up to 20~30 minutes.

✎Press the ENTER

E

button to stop the Clear Scrambled

Channel.

✎This function is only available in Cable mode.

Channel List

Channel List Option Menu

t

Set each channel using the Channel List menu options. Option

menu items may differ depending on the channel status.

■

Add / Delete: Delete or add a channel to display the channels

you want.

✎All deleted channels will be shown on the All Channels

menu.

✎A gray-colored channel indicates the channel has been

deleted.

✎The Add menu only appears for deleted channels.

✎Delete a channel from the Added Channels or Favorite

menu in the same manner.

■

Add to Favorite / Delete from Favorite

t

: Set channels

you watch frequently as Favorites.

■

Timer Viewing: You can set a desired channel to be displayed

automatically at the set time; even when you are watching another

channel. Set the current time first to use this function.

✎Only memorized channels can be reserved.

✎Reserved programs will be displayed in the Programmed

menu.

✎When a digital channel is selected, press the ► (Next

Program) button to view the digital program. If you select

the ENTER

E

(Schedule) button on the next program, you

can set Timer Viewing directly.

■

Channel Name Edit (analog channels only): Assign your own

channel name.

■

Select All: Select all the channels in the channel list.

■

Deselect All: Deselect all the selected channels.

✎You can only select Deselect All when one or more

channels are selected.

■

Auto Program: Scans for a channel automatically and stores in

the TV.

Programmed

(in Channel List)

You can view, modify or delete a show you have reserved to watch.

■

Change Info: Change a show you have reserved to watch.

■

Cancel Schedules: Cancel a show you have reserved to watch.

■

Information: Display a show you have reserved to watch. (You

can also change the reservation Information.)

■

Select All / Deselect All: You can select or deselect all channels

in the channel list.

Sound Menu

Mode

t

■

Standard: Selects the normal sound mode.

■

Music: Emphasizes music over voices.

■

Movie: Provides the best sound for movies.

■

Clear Voice: Emphasizes voices over other sounds.

■

Amplify: Increase the intensity of high-frequency sounds to allow a

better listening experience for the hearing impaired.

Equalizer

(standard sound mode only)

■

Balance L/R: Adjusts the balance between the right and left

speaker.

■

100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment):

Adjusts the level of specific bandwidth frequencies.

■

Reset: Resets the equalizer to its default settings.

SRS TruSurround HD

(standard sound mode only)

SRS TruSurround HD is a patented SRS technology that solves the

problem of playing 5.1 multichannel content over two speakers.

TruSurround delivers a compelling, virtual surround sound experience

through any two-speaker playback system, including internal

television speakers. It is fully compatible with all multichannel formats.

Preferred Language

(digital channels only)

Digital-TV broadcasts are capable of simultaneous transmission of

many audio tracks (for example, simultaneous translations of the

program into foreign languages).

✎You can only select a language from among the ones being

broadcasted.

Multi-Track Sound (MTS)

(analog channels only)

■

Mono: Choose for channels that are broadcasting in mono or if

you are having difficulty receiving a stereo signal.

■

Stereo: Choose for channels that are broadcasting in stereo.

■

SAP: Choose to listen to the Separate Audio Program, which is

usually a foreign-language translation.

✎Depending on the program being broadcast, you can listen to

Mono, Stereo or SAP.

Auto Volume

Because each broadcasting station has its own signal conditions,

the volume may fluctuate each time channel is changed. This feature

lets you automatically adjust the volume of the desired channel by

lowering the sound output when the modulation signal is high or by

raising the sound output when the modulation signal is low.

Sound Reset

■

Reset All: Resets all sound settings to the factory defaults.

Setup Menu

❑Setting the Time

Time

✎The current time will appear every time you press the INFO

button.

■

Clock: Setting the clock is for using various timer features of the

T V.

✎If you disconnect the power cord, you have to set the clock

again.

Clock Mode: Set the current time manually or automatically.

Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm.

✎Available only when Clock Mode is set to Manual.

Time Zone: Select your time zone.

DST (Daylight Saving Time): Switches the DST (Daylight Saving

Time) function on or off.

✎DST and Time Zone function is only available when the

Clock Mode is set to Auto.

■

Sleep Timer

t

Automatically shuts off the TV after a preset period of time. (30,

60, 90, 120, 150 and 180 minutes).

✎To cancel the Sleep Timer, select Off.

Timer 1 / Timer 2 / Timer 3

Three different on / off timer settings can be made. You must set the

clock first.

■

On Time / Off Time: Set the hour, minute, am/pm and Activate /

Inactivate. (To activate the timer with the setting you have chosen,

set to Activate.)

■

Volume: Set the desired volume level.

■

Contents: When the On Time is activated, you can turn on a

specific channel or play back contents such as photo or audio files.

- TV/USB: Select TV or USB. (Make sure that an USB device is

connected to your TV.)

- Antenna: Displays the current antenna source.

- Channel: Select the desired channel.

- Music/Photo: Select the folder containing MP3/JPEG les on

the USB device.

✎The maximum displayed number of files, including sub

folders, in one folder of USB storage device is 2000.

✎The media may not be playing smoothly when using the

device lower than USB 2.0.

■

Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or

Manual to set at you convenience. If you select Manual, you can

set up the day you want to activate the timer.

❑Other Features

Program Rating Lock

The Program Rating Lock feature automatically locks out programs

that are deemed inappropriate for children. The user must enter a

PIN (personal identication number) before any of the Program Rating

Lock restrictions are set up or changed.

✎Program Rating Lock is not available in HDMI or Component

mode.

✎The default PIN number of a new TV set is “0-0-0-0”.

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please

contact the SAMSUNG customer care center.

Country CANADA U.S.A

Address

Samsung Electronics

Canada Inc., Customer

Service 55 Standish

Court Mississauga,

Ontario L5R 4B2 Canada

Samsung Electronics

America, Inc. 85

Challenger Road Ridgeeld

Park, NJ 07660

Customer Care

Center



1-800-SAMSUNG (726-7864)

Web Site

www.samsung.com/ca

(English)

www.samsung.com/ca_fr

(French)

www.samsung.com/us

LED TV

user manual

Getting Started

Accessories

• Remote Control (AA59-00666A) &

Batteries (AAA x 2)

• Warranty Card / Safety Guide

• Owner’s Instructions

• Power Cord

• Cable manager

Input Cables (Sold Separately)

• HDMI

• HDMI-DVI

• Component

• Composite (AV)

• Coaxial (RF)

✎Check the cable before plug-in

Cable Ports

Do not plug cable upside down.

Be sure to check before plug-in.

HDMI

USB

TV Controller (Panel Key)

TV Controller

TV Controller

Function menu

MEDIA.P

m R s

P

Return

Remote control sensor

UN32EH4003 / UN39EH5003

UN22ES4003

Power on Turns the TV on by pressing the controller in standby

mode.

Adjusting the volume Adjusts the volume by moving the controller from side

to side when the power is on.

Selecting a channel Selects a channel by moving the controller up and

down when the power is on.

Using the function

menu

Press the controller when the power is on, then the

function menu screen appears. If you press it again, the

function menu screen disappears.

Selecting the Media

Play

Selects the MEDIA.P by moving the controller in

the function menu screen. The Media Play main

screen appears.

Selecting the MENU

(

m

)

Selects the MENU(

m

) by moving the controller in the

function menu screen. The OSD(On Screen Display) of

your TV’s feature appears.

Selecting the Source

List (

s

)

Selects the Source List(

s

) by moving the controller

in the function menu screen. The Source List screen

appears.

Power Off (

P

)Selects the Power Off (

P

) to turn the TV off by moving

the controller in the function menu screen.

✎Exits the menu when pressing the controller more than 1 second.

✎When selecting the function by moving the controller to the up/down/left/

right directions, be sure not to press the controller. If you press it first, you

cannot operate it to move the up/down/left/right directions.

Plug & Play (Initial Setup)

When you turn the TV on for the first time, a sequence of on-screen

prompts will assist in configuring basic settings. Press the POWER

button. Plug & Play is available only when the Input source is set to

T V.

✎Connecting the power cord and antenna. (refer to

‘Connections’)

Selecting a language

Select Language of the OSD.

Language

U

Move

E

Enter

Plug & Play







English

Español

Français

Select the desired OSD (On Screen

Display) language.



Selecting a Home Use mode

Select ‘Home Use’ when installing this TV in your home.

L

Move

E

Enter

Plug & Play

Home Use

Store Demo









• Select the Home Use mode. Store

Demo mode is for retail environments.

• When pressing TV controller, the

function menu screen appears. Select

the MENU(m) and press it more than 5

seconds using the controller. The Store

Demo mode is set. Cancel the Store

Demo by selecting Source List(s)

and pressing it more than 5 seconds.



Selecting an antenna

Select the Antenna source to memorize.

Air Start

Cable Start

Auto Start

U

Move

E

Enter

m

Skip

Plug & Play







In Cable mode, you can select the correct

signal source among STD, HRC, and IRC

by pressing the ▲, ▼, ◄ or ► button.



Setting the Clock Mode

Set the Clock Mode.

Clock Mode : Auto

Plug & Play

E

Enter

m

Skip





Set the Clock Mode automatically or

manually.

• If you select the Auto, set the

DST(Daylight Saving Time).

• On the DST screen, press ENTER

E

,

then select whether to turn DST

(Daylight Savings Time) on or off. Select

the time zone where you live.



Viewing the HD Connection Guide

The connection method for the best HD screen quality is displayed.



Enjoy your TV.

Press the ENTER

E

button.

Changing the Input Source

Source List

Use to select TV or an external input source such as a DVD player /

Blu-ray player / cable box / STB satellite receiver.

1. Press the SOURCE button.

2. Select a desired external input source.

UN32EH4003 / UN39EH5003

■

TV / AV / Component / HDMI1/DVI / HDMI2

UN22ES4003

■

TV / AV / Component / HDMI/DVI

✎You can only choose external devices that are connected

to the TV. In the Source List, connected inputs will be

highlighted.

How to use Edit Name

Edit Name lets you associate a device name to an input source. To

access Edit Name, press the TOOLS button in Source List. The

following selections appear under Edit Name:

■

VCR / DVD / Cable STB / Satellite STB / PVR STB / AV

Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV

/ Blu-ray / HD DVD / DMA: Name the device connected to the

input jacks to make your input source selection easier.

✎When connecting a PC to the HDMI IN 1(DVI) or HDMI / DVI

IN port with HDMI cable, you should set the TV to PC mode

under Edit Name.

✎When connecting a PC to the HDMI IN 1(DVI) or HDMI / DVI

IN port with HDMI to DVI cable, you should set the TV to DVI

PC mode under Edit Name.

✎When connecting an AV devices to the HDMI IN 1(DVI) or

HDMI / DVI IN port with HDMI to DVI cable, you should set the

TV to DVI mode under Edit Name.

Information

You can see detailed information about the connected external

device.

■

Program Rating Lock: You can block rated TV Programs.

■

TV Parental Guidelines: You can block TV programs depending

on their rating. This function allows you to control what your

children are watching.

■

MPAA Rating: You can block movies depending on their MPAA

rating. The Motion Picture Association of America(MPAA) has

implemented a rating system that provides parents or guardians

with advanced information on which films are appropriate for

children.

■

Canadian English: You can block TV programs depending on

their Anglophone Canadian.

■

Canadian French: You can block TV programs depending on

their French Canadian rating.

■

Downloadable U.S. Rating: Parental restriction information can

be used while watching DTV channels.

■

Change PIN: The Change PIN screen will appear. Choose any

4 digits for your PIN and enter it in Enter New PIN. Re-enter

the same 4 digits in Confirm New PIN. When the Change PIN

screen disappears, press the OK button. The TV has memorized

your new PIN.

✎If you forget the PIN, press the remote-control buttons in

the following sequence, which resets the pin to “0-0-0-0” :

POWER (off) → MUTE → 8 → 2 → 4 → POWER (on)

Language

Set the menu language.

✎Choose between English, Español and Français.

Game Mode

When connecting to a game console such as PlayStation™ or

Xbox™, you can enjoy a more realistic gaming experience by

selecting the game menu.

✎Precautions and limitations for game mode

xTo disconnect the game console and connect another external

device, set Game Mode to Off in the setup menu.

xIf you display the TV menu in Game Mode, the screen shakes

slightly.

✎Game Mode is not available when the input source is set to

TV.

✎After connecting the game console, set Game Mode to On.

Unfortunately, you may notice reduced picture quality.

Caption

(On-Screen Text Messages)

■

Caption: You can switch the caption function on or off. If

captions are not available, they will not be displayed on the

screen.

✎The Caption feature does not work in Component or

HDMI mode.

■

Caption Mode: You can select the desired caption mode.

Default / CC1~CC4 / Text1~Text4: (analog channels only) The

Analog Caption function operates in either analog TV channel

mode or when a signal is supplied from an external device to the

TV. (Depending on the broadcasting signal, the Analog Caption

function may or may not work with digital channels.)

Default / Service1~Service6 / CC1~CC4 / Text1~Text4:

(digital channels only) The Digital Captions function works with

digital channels.

✎Service1~6 may not be available in digital caption mode

depending on the broadcast.

■

Digital Caption Options: (digital channels only)

Size: Options include Default, Small, Standard and Large. The

default is Standard.

Font Style: Options include Default and Styles 0 to 7. The

default is Style 0.

Foreground Color: Options include Default, White, Black, Red,

Green, Blue, Yellow, Magenta and Cyan. You can change the

color of the letter. The default is White.

Background Color: Options include Default, White, Black, Red,

Green, Blue, Yellow, Magenta and Cyan. You can change the

background color of the caption. The default is Black.

Foreground Opacity: This adjusts the opacity of text. Options

include Default, Transparent, Translucent, Solid and Flashing.

Background Opacity: This adjusts the opacity of the caption

background. Options include Default, Transparent, Translucent,

Solid and Flashing.

Return to Default: This option sets each Size, Font Style,

Foreground Color, Background Color, Foreground Opacity and

Background Opacity to its default.

✎Digital Caption Options are available only when Default

and Service1 ~ Service6 can be selected in Caption

Mode.

✎The Foreground and Background cannot be set to have the

same color.

Melody

Set so that a melody plays when the TV is turned on or off.

✎The Melody does not play.

xWhen no sound is output from the TV because the MUTE

button has been pressed.

xWhen no sound is output from the TV because the volume has

been reduced to minimum with the VOL – button.

xWhen the TV is turned off by Sleep Timer function.

Auto Protection Time

■

Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10

hours): If the screen remains idle with a still image for a certain

period of time defined by the user, the screen saver is activated

to prevent the formation of ghost images on the screen.

Eco Solution

■

Energy Saving (Off / Low / Medium / High / Picture Off) :

This adjust the brightness of the TV in order to reduce power

consumption. If you select Picture Off, the screen is turned

off, but the sound remains on. Press any button except volume

button to turn on the screen.

■

No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets

how quickly the TV switches to standby mode, if no picture is

being received.

✎Disabled when the PC is in power saving mode.

■

Auto Power Off (Off / On): The TV will be automatically turned

off when no user operation is received for 4 hours.

© 2012 Samsung Electronics Co., Ltd. All rights reserved.

UN22ES4003 VCRBlu-ray player

Cable

or

Power Input

TV Rear Panel

TV Rear Panel

VHF/UHF Antenna

AV Device (3)

Using an Audio/Video

Cables

AV Device (2)

Using a Component Cable

(up to 1080p)

Media Play

Using a USB Drive PC

Using an HDMI Cable or

an HDMI to DVI Cable.

Use the PC speakers for

audio.

AV Device (1)

Using an HDMI Cable (up

to 1080p)

Blu-ray player / DVD / cable

box / sat box

PC

UN32EH4003 / UN39EH5003

















✎For UN22ES4003 connection, you can refer

to UN32EH4003 / UN39EH5003 according to

connection numbers.

BN68-04466A

BN68-04466A-02

Channel Mode

Change the channel mode directly between Added Channels and

Favorite Channels.

✎The Favorite Channels is enabled only when you set Add to

Favorite.

Fine Tune

(analog channels only)

If the reception is clear, you do not have to ne tune the channel, as

this is done automatically during the search and store operation. If

the signal is weak or distorted, fine tune the channel manually.

✎Fine tuned channels that have been saved are marked with an

asterisk “*” on the right-hand side of the channel number in the

channel banner.

✎To reset the fine-tuning, select Reset.

Picture Menu

Mode

t

Select your preferred picture type.

✎When connecting a PC, you can only select Entertain and

Standard.

■

Dynamic: Suitable for a bright room.

■

Standard: Suitable for a normal environment.

■

Movie: Suitable for watching movies in a dark room.

■

Entertain: Suitable for watching movies and games.

✎Only available when connecting a PC.

Backlight / Contrast / Brightness / Sharpness /

Color / Tint (G/R)

Your television has several setting options for picture quality control.

✎When connecting a PC, you can only make changes to

Backlight, Contrast, Brightness and Sharpness

Advanced Settings

(available in Standard / Movie mode)

Compared to previous models, new Samsung TVs have a more

precise picture.

✎When connecting a PC, you can only make changes to

Gamma and White Balance.

■

Color Space (Auto / Native): Adjusts the range of colors

available to create the image.

■

White Balance: Adjusts the color temperature for a more natural

picture.

R-Offset / G-Offset / B-Offset: Adjusts each color’s (red, green,

blue) darkness.

R-Gain / G-Gain / B-Gain: Adjusts each color’s (red, green, blue)

brightness.

Reset: Resets the White Balance to it’s default settings.

■

Gamma: Adjusts the primary color intensity.

■

Dynamic Contrast (Off / Low / Medium / High): Adjusts the

screen contrast.

■

Black Tone (Off / Dark / Darker / Darkest): Select the black level

to adjust the screen depth.

■

Flesh Tone: Emphasize pink “esh tone”.

■

Motion Lighting (Off / On): Reduce power consumption by

brightness control adapted motion.

✎Available in Standard mode only.

Picture Options

✎When connecting a PC, you can only make changes to the

Color Tone, Size and HDMI Black Level.

■

Color Tone (Cool / Standard / Warm1 / Warm2)

✎Warm1 or Warm2 will be deactivated when the picture

mode is Dynamic.

■

Size: Your cable box/satellite receiver may have its own set of

screen sizes as well. However, we highly recommend you use

16:9 mode most of the time.

16:9: Sets the picture to 16:9 wide mode.

Zoom1: Use for moderate magnification.

Zoom2: Use for a stronger magnification.

Wide Fit: Enlarges the aspect ratio of the picture to fit the entire

screen.

4:3: Sets the picture to basic (4:3) mode.

✎Do not watch in 4:3 format for a long time. Traces of borders

displayed on the left, right and center of the screen may

cause image retention (screen burn) which are not covered

by the warranty.

Screen Fit (DTV): Displays the full image without any cut-off when

HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p)

signals are inputted.

✎HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p

(1280x720)

✎Settings can be adjusted and stored for each external device

you have connected to an input on the TV.

✎Picture Sizes available by Input Source:

Input Source Picture Size

ATV, AV, Component (480i,

480p) 16:9, Zoom1, Zoom2, 4:3

DTV(1080i, 1080p),

Component (1080i, 1080p),

HDMI (720p, 1080i, 1080p)

16:9, Wide Fit, 4:3, Screen Fit

■

Digital Noise Filter (Off / Low / Medium / High / Auto): If the

broadcast signal received by your TV is weak, you can activate

the Digital Noise Filter feature to reduce any static and ghosting

that may appear on the screen.

✎When the signal is weak, try other options until the best

picture is displayed.

■

HDMI Black Level (Normal / Low): Selects the black level on the

screen to adjust the screen depth.

✎Available only in HDMI mode (RGB signals).

■

Film Mode (Off / Auto): Sets the TV to automatically sense and

process film signals from all sources and adjusts the picture for

optimum quality.

✎Available in ATV, DTV(interlace), AV, COMPONENT (480i /

1080i) and HDMI (480i / 1080i).

■

LED Motion Plus (Off / On): Removes drag from fast scenes with

a lot of movement to provide a clear picture.

Picture Reset

Resets your current picture mode to its default settings.

■

Reset Picture Mode: Returns all picture values in the currently

selected mode to the default settings.

✎Note

yFor better picture and audio quality, connect to a digital device using an HDMI

cable.

yThe picture may not display normally (if at all) or the audio may not work if an

external device that uses an older version of HDMI mode is connected to the TV. If

such a problem occurs, ask the manufacturer of the external device about the HDMI

version and, if out of date, request an upgrade.

yBe sure to purchase a certied HDMI cable. Otherwise, the picture may not display

or a connection error may occur.

yPC/DVI AUDIO IN input are not supported.

yDIGITAL AUDIO OUT(OPTICAL) is not supported.

yFor HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) or HDMI / DVI

IN jack.

yConnecting through the HDMI cable may not be supported depending on the PC.

yIf an HDMI to DVI cable is connected to the HDMI IN 1(DVI) or HDMI / DVI IN port,

the audio does not work.

ySERVICE: Connector for service only.

Power Input

Press to select additional channels (digital) being

broadcasted by the same station. For example, to

select channel ‘54-3’, press ‘54’, then press ‘-’ and ‘3’.

Returns to the previous channel.

Press to directly access to channels.

Turns the TV on and off.

Use these buttons in a specific feature.

P.SIZE: Lets you choose the picture size.

MTS: Press to choose stereo, mono or Separate Audio

Program (SAP broadcast).

CC: Controls the caption decoder.

Cuts off the sound temporarily.

Automatically shuts off the TV at a preset time.

Displays the channel list on the screen.

Displays information on the TV screen.

Quickly select frequently used functions.

Selects the on-screen menu items and changes the

values seen on the menu.

Exit the menu.

Returns to the previous menu.

Displays and selects the available video sources.

Use these buttons according to the direction on screen.

Changes channels.

Displays the main on-screen menu.

Views the Media Play.

Adjusts the volume.

MEDIA.P SLEEP

Installing batteries (Battery size: AAA) ✎NOTE

xUse the remote control within 23 feet from TV.

xBright light may affect the performance of the remote control.

Avoid use when nearby fluorescent lights or neon signs.

xThe Color and shape may vary depending on the model.

[UE4003-ZC]BN68-04466A-02ENG-1016.indd 1 2013-10-16 오전 9:12:22

- 10 -- 9 -

- 14-- 13 -

- 11 -

- 15 -

- 12 -

- 16 -

Videos

00:04:03 / 00:07:38

►1/1

Movie 01.avi

E Pause L Jump T Tools R Return

1. Press the ◄ or ► button to select Videos, then press the

ENTER

E

button in the Media Play menu.

2. Press the ◄/►/▲/▼ button to select the desired video in the file

list.

3. Press the ENTER

E

button or



(Play) button.

- The selected file is displayed on the top with its playing time.

- If video time information is unknown, playing time and the

progress bar are not displayed.

- During video playback, you can search using the ◄ and ►

button.

✎In this mode, you can play movie clips contained in a game, but

you cannot play the game itself.

ySupported Subtitle Formats

- External

Name File extension

MPEG-4 timed text .ttxt

SAMI .smi

SubRip .srt

SubViewer .sub

Micro DVD .sub or .txt

SubStation Alpha .ssa

Advanced SubStation Alpha .ass

- Internal

Name Container Format

Xsub AVI Picture Format

SubStation Alpha MKV Text Format

Advanced SubStation Alpha MKV Text Format

SubRip MKV Text Format

MPEG-4 Timed text MP4 Text Format

ySupported Video Formats

File

Extension Container Video Codec Resolution Frame

rate(fps)

Bit

rate(Mbps)

Audio

Codec

*.mp4 MP4

DivX

3.11/4.x/5.1/6.0 1920x1080 6~30 30Mbps

MP3 /

ADPCM /

AAC

H264 1920x1080 6~30 30Mbps

AVC 1920x1080 6~30 30Mbps

MJPEG 640x480 6~30 10Mbps

*.avi

*.mkv

AVI,

MKV

DivX

3.11/4.x/5.1/6.0 1920x1080 6~30 30Mbps MP3 /

AC3 /

LPCM /

ADPCM /

DTS Core

MPEG4 SP

/ ASP 1920x1080 6~30 30Mbps

H264 1920x1080 6~30 30Mbps

MJPEG 640x480 6~30 10Mbps

File

Extension Container Video Codec Resolution Frame

rate(fps)

Bit

rate(Mbps)

Audio

Codec

*.asf

*.wmv ASF

DivX 3.11 / 4.x

/5.1 / 6.0 1920x1080 6~30 30Mbps MP3 /

AC3 /

LPCM /

ADPCM

/ WMA

/ WMA

Pro

MPEG4 SP

/ ASP 1920x1080 6~30 30Mbps

H.264 1920x1080 6~30 30Mbps

*.ts

*.trp

*.tp

*.m2ts

TS

MPEG2 1920x1080 6~30 30Mbps AC3 /

AAC /

MP3 /

DD+ /

HE-AAC

H. 264 BP / MP

/ HP 1920x1080 6~30 30Mbps

*.dat

*.mpg

*.mpeg

*.vob

PS

MPEG1 1920x1080 24/25/30 30Mbps AC3 /

MPEG /

LPCM /

AAC

MPEG2 1920x1080 24/25/30 30Mbps

H. 264 BP / MP

/ HP 1920x1080 6~30 30Mbps

*.3gp 3GPP

MPEG4 SP

/ ASP 1920x1080 6~30 30Mbps MP3

H.264 1920x1080 6~30 30Mbps

*.v

*.swf

flash

formats

H.264 1920x1080 6~30 30Mbps MP3

Sorenson H.263 1920x1080 6~30 30Mbps

Other Restrictions

yVideo content will not play, or not play correctly, if there is an error in the

content or the container.

ySound or video may not work if the contents have a standard bit rate/

frame rate above the compatible Frame/sec listed in the table above.

yIf the Index Table is in error, the Seek (Jump) function is not supported.

yThe menu may take longer to appear if the video’s bit rate exceeds

10Mbps.

yVideo content can not be played, if there are many contents in one file.

Video Decoder

Supports up to H.264, Level 4.1

H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not

supported.

MPEG4 SP, ASP :

– Below 1280 x 720: 60 frame max

– Above 1280 x 720: 30 frame max

H.263 is not supported.

GMC is not support.

Audio Decoder

Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO

WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR mode

of WMA Pro is not supported)

WMA Lossless is not supported.

Music

3/15

I Love you

Jhon

Music 1

No Singer

Music 2

No Singer

Music 3

No Singer

Music 4

No Singer

Music 5

No Singer

I Love You

Jhon

1st Album

Pop

2010

4.2MB

01:10 / 04:02

SUM

E Pause L Jump T Tools R Return

Playlist

1. Press the ◄ or ► button to select Music, then press the

ENTER

E

button in the Media Play menu.

2. Press the ◄/►/▲/▼ button to select the desired Music in the file

list.

3. Press the ENTER

E

button or  (Play) button.

✎During music playback, you can search using the ◄ and ►

button.

✎



(REW) and

μ

(FF) buttons do not function during play.

✎Only displays the files with MP3 and PCM file extension. Other

file extensions are not displayed, even if they are saved on the

same USB device.

✎If the sound is abnormal when playing MP3 files, adjust the

Equalizer in the Sound menu. (An over-modulated MP3 file

may cause a sound problem.)

Photos

Image1024.jpg 1024x768 2011/10/24 3/15

E Pause L Previous/Next T Tools R Return

Normal

1. Press the ◄ or ► button to select Photos, then press the

ENTER

E

button in the Media Play menu.

2. Press the ◄/►/▲/▼ button to select the desired photo in the file

list.

3. Press the ENTER

E

button or



(Play) button.

✎NOTE

xWhile a photo list is displayed, press the



(Play) / ENTER

E

button on the remote control to start the slide show.

xAll files in the file list section will be displayed in the slide show.

xDuring the slide show, files are displayed in order.

xDuring the slide show, you can adjust the slide show speed using

(π) (REW) or (µ) (FF) button.

xYou can move to other file using ◄ or ► button.

ySupported Photo Formats

Image Photo Resolution

JPEG Base-line 15360 x 8704

Progressive 1024 x 768

Other Restrictions

yCMYK, YCCK Color space JPEG are not supported.

Playing Multiple Files

■

Playing selected video/music/photo files

1. Press the Yellow button in the le list to select the desired le.

2. Repeat the above operation to select multiple les.

✎NOTE

xThe

c

mark appears to the left of the selected files.

xTo cancel a selection, press the Yellow button again.

xTo deselect all selected files, press the TOOLS button and select

Deselect All.

3. Press the TOOLS button, and then select Play Selected

Contents.

■

Playing the video/music/photo file group

1. While a file list is displayed, move to any file in desired group.

2. Press the TOOLS button, and then select Play Folder.

Media Play - Additional Functions

■

Videos/Music/Photos Play Option menus

When playing a file, press the TOOLS button.

Category Operation Videos Music Photos

Title You can move the other le

directly.

c

Repeat Mode You can play movie and music

files repeatedly.

c c

Picture Size You can adjust the picture size to

your preference.

c

Picture Mode You can adjust the picture

setting.

c c

Sound Mode You can adjust the sound

setting.

ccc

Subtile Setting

You can play the video with

Subtitles. This function only

works if the subtitles are the

same file name as the video.

c

Audio Language

You can change the audio

language if the video has more

than one language.

c

Stop Slide Show /

Start Slide Show

You can start or stop a Slide

Show.

c

Slide Show Speed You can select the slide show

speed during the slide show.

c

Background Music

You can set and select

background music when

watching a Slide Show.

c

Zoom You can zoom into images in full

screen mode.

c

Rotate You can rotate images in full

screen mode.

c

Information You can see detailed information

about the played file.

ccc

Settings

Using the Setup Menu

■

Information: Select to view information on the connected device.

Other Information

Installing the Wall Mount Kit

The wall mount kit (sold separately) allows you to mount the TV on

the wall.

For detailed information on installing the wall mount, see the

instructions provided with the wall mount items. Contact a technician

for assistance when installing the wall mount bracket. Samsung

Electronics is not responsible for any damage to the product or injury

to yourself or others if you elect to install the wall mount on your own.

Wall Mount Kit Specifications (VESA)

✎The wall mount kit is not supplied, but sold separately.

Install your wall mount on a solid wall perpendicular to the oor. When

attaching to other building materials, please contact your nearest

dealer. If you install the TV on a ceiling or slanted wall, it may fall and

result in severe personal injury.

Problem Possible Solution

Caption on the TV menu is greyed out. • You cannot select Caption in the TV menu when watching content from a device connected via HDMI or

Component.

• Caption must be activated on the external device.

There is a plastic smell from the TV. • This smell is normal and will dissipate over time.

TV Signal Strength is unavailable in the

Self Diagnosis Test menu.

• This function is only available for digital channels from an Antenna / RF/Coax connection.

TV is tilted to the right or left side. • Remove the stand base from the TV and reassemble it.

The Channel menu is grey out

(unavailable).

• The Channel menu is only available when you select the TV source.

Your settings are lost after 30 minutes or

every time the TV is turned off.

• If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from

Store Demo mode to Home Use mode using the Plug & Play procedure. Press the SOURCE button to select

TV mode, go to MENU → Setup → Plug & Play → ENTER

E

.

You have intermittent loss of audio or

video.

• Check the cable connections and reconnect them.

• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible

enough for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.

You see small particles when you look

closely at the edge of the frame of

the TV.

• This is part of the product’s design and is not a defect.

POP (TV’s internal banner ad) appears

on the screen.

• Select Home Use under Plug & Play mode. For details, refer to Plug & Play (Initial Setup).

✎This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark

pixels on the screen. These pixels will have no impact on the performance of the product.

✎Watch these troubleshooting on video at www.samsung.com/spsn.

✎Some functions and pictures shown in this manual are available on specific models only.

✎You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com → Support → Downloads) by USB.

Storage and Maintenance

✎If you attached some stickers on the TV screen, it remains some debris after removing the sticker. Please clean it to watch TV.

✎The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using a soft cloth to prevent

scratches.

Do not spray water directly onto the product.

Any liquid that goes into the product may

cause a failure, fire, or electric shock.

Clean the product with a soft cloth dampened

with in a small amount of water. Do not use a

flammable liquid (e.g. benzene, thinners) or a

cleaning agent.

License

TheaterSound, SRS and the symbol are trademarks of SRS Labs, Inc.

TheaterSound technology is incorporated under licence from SRS Labs, Inc.

SRS TheaterSound™ provides the most immersive surround sound experience from the TVs built-in

speakers, while maintaining steady volume and delivering rich bass and clear dialog.

DivX Certied® to play DivX® video up to HD 1080p, including premium

content.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi

Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx. com for more

information and software tools to convert your les into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND:

This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD)

movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go

to vod. divx.com for more information on how to complete your registration. Covered by one or more of

the following U.S. patents : 7,295,673; 7,460,668; 7,515,710; 7,519,274 DivX®, DivX Certied® and

associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

Manufactured under license from Dolby Laboratories. Dolby and the

double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380;

6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the

Symbol, & DTS and the Symbol together are registered trademarks & DTS

2.0 Channel is a trademark of DTS, Inc. Product includes software. © DTS,

Inc. All Rights Reserved.

The terms HDMI and HDMI High-Denition Multimedia Interface, and the

HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC

in the United States and other countries.

Open Source License Notice

Open Source used in this product can be found on the following webpage. (http://opensource.samsung.

com) Open Source License Notice is written only English.

To send inquiries and requests for questions regarding open sources, contact Samsung via Email (oss.

request@samsung.com).

■ This product uses some software programs which are distributed under the Independent JPEG Group.

ICU License - ICU 1.8.1 and later

COPYRIGHT AND PERMISSION NOTICE

Copyright (c) 1995-2008 International Business Machines Corporation and others All rights reserved.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and

associated documentation files (the "Software"), to deal in the Software without restriction, including

without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the

Software, and to permit persons to whom the Software is furnished to do so, provided that the above

copyright notice(s) and this permission notice appear in all copies of the Software and that both the above

copyright notice(s) and this permission notice appear in supporting documentation.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,

INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL

THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM,

OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER

RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,

NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE

OR PERFORMANCE OF THIS SOFTWARE.

Except as contained in this notice, the name of a copyright holder shall not be used in advertising or

otherwise to promote the sale, use or other dealings in this Software without prior written authorization of

the copyright holder.

All trademarks and registered trademarks mentioned herein are the property of their respective owners.

Problem Possible Solution

There is a dotted line on the edge of

the screen.

• If the picture size is set to Screen Fit, change it to 16:9.

• Change cable/satellite box resolution.

The picture is black and white. • If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1

on the TV.

When changing channels, the picture

freezes or is distorted or delayed.

• If connected to a cable box, please try to reset it. (reconnect the AC cord and wait until the cable box reboots. It

may take up to 20 minutes)

• Set output resolution of the cable box to 1080i or 720p.

Sound Problem First of all, please perform the Sound Test to confirm that your TV audio is properly operating.

(go to MENU - Support - Self Diagnosis - Sound Test)

If the audio is OK, the sound problem may caused by the source or signal.

There is no sound or the sound is too

low at maximum volume.

• Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV.

The picture is good but there is no

sound.

• If you are using an external device, check the device’s audio output option (ex. you may need to change your

cable box’s audio option to HDMI when you have a HDMI connected to your TV).

• Reboot the connected device by reconnecting the device’s power cable.

The speakers are making an

inappropriate noise.

• Check the cable connections. Make sure a video cable is not connected to an audio input.

• For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.

• Perform the Sound Test as explained above.

No Picture, No Video

The TV will not turn on. • Make sure the AC power cord is securely plugged into the wall outlet and the TV.

• Make sure the wall outlet is working.

• Try pressing the POWER button on the TV to make sure the problem is not the remote.

If the TV turns on, refer to ‘Remote control does not work’ below.

The TV turns off automatically. • Ensure the Sleep Timer is set to Off in the Time menu.

• If your PC is connected to the TV, check your PC power settings.

• Make sure the AC power cord is plugged in securely to the wall outlet and the TV.

• When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15 minutes

if there is no signal.

There is no picture/video. • Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices).

• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV

input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.

• Make sure your connected devices are powered on.

• Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control.

• Reboot the connected device by reconnecting the device’s power cable.

Antenna(Air / Cable) Connection

The TV is not receiving all channels. • Make sure the coaxial cable is connected securely.

• Please try Auto Program to add available channels to the channel list.

go to MENU - Channel - Auto program then select Auto and make sure the correct Cable TV signal type is set

in the menu. There are 3 options. (STD, HRC and IRC)

• Verify the antenna is positioned correctly.

No Caption on digital channels. • Check the Caption Setup menu. Try changing Caption Mode Service 1 to CC1.

• Some channels may not have caption data.

The picture is distorted: macroblock,

error, small block, dots, pixelization.

• Compression of video contents may cause picture distortion. Especially on fast moving pictures such as sports

and action movies.

• A weak signal can cause picture distortion. This is not a TV problem.

Others

Purple/green rolling horizontal bars and

buzzing noise from the TV speakers with

Component cable connection.

• Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the set-

top-box has a grounding issue. Replace the Component video cables with an HDMI connection.

The picture will not display in full screen. • HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.

• Black bars on the Top & Bottom will be shown on movies that have aspect ratios different from your TV.

• Adjust the picture size option on your external device or change the TV to full screen.

The remote control does not work. • Replace the remote control batteries with correct polarity (+/–).

• Clean the transmission window located on the top of the remote control.

• Try pointing the remote directly at the TV from 5~6 feet away.

The cable/set top box remote control

does not turn the TV on or off, or adjust

the volume.

• Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for

the SAMSUNG TV code.

A “Mode Not Supported” message

appears.

• Check the supported resolution of the TV and adjust the external device’s output resolution accordingly. Refer to

resolution settings in this manual.

✎NOTE

xStandard dimensions for wall mount kits are shown in the table

below.

xWhen purchasing our wall mount kit, a detailed installation

manual and all parts necessary for assembly are provided.

xDo not use screws that do not comply with the VESA standard

screw specifications.

xDo not use screws that are longer than the standard dimension

or do not comply with the VESA standard screw specifications.

Screws that are too long may cause damage to the inside of the

TV set.

xFor wall mounts that do not comply with the VESA standard

screw specifications, the length of the screws may differ

depending on the wall mount specifications.

xDo not fasten the screws too firmly. This may damage the

product or cause the product to fall, leading to personal injury.

Samsung is not liable for these kinds of accidents.

xSamsung is not liable for product damage or personal injury

when a non-VESA or non-specified wall mount is used or the

consumer fails to follow the product installation instructions.

xDo not mount the TV at more than a 15 degree tilt.

xAlways have two people mount the TV on a wall.

Product

Family

TV size in

inches

VESA screw hole specs

(A * B) in millimeters

Standard

Screw Quantity

LED-TV

19~22 75 X 75

M4

4

26 100 X 100

32~40 200 X 200 M6

46~60 400 X 400 M8

Do not install your Wall Mount Kit while

your TV is turned on. It may result in

personal injury due to electric shock.

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing onto the TV

may cause the TV to fall. In particular, ensure that your

children do not hang over or destabilize the TV; doing so

may cause the TV to tip over, resulting in serious injuries

or death. Follow all safety precautions provided on the

included Safety Flyer. For added stability, install the anti-

fall device for safety purposes, as follows.

To prevent the TV from falling

✎Since the necessary clamps, screws, and string are not

supplied, please purchase these additionally.

1. Drive the screws into the clamps and firmly fasten them onto the

wall. Make sure the screws are firmly fixed into the wall.

2. Remove the screws from the back center of the TV, put the

screws into the clamps, and then fasten the screws onto the TV

again.

3. Connect the clamps fixed onto the TV and the clamps fixed onto

the wall with a strong cable and then tie the string tightly.

✎Verify all connections are properly secured. Periodically check

the connections for any sign of fatigue or failure. If you have

any doubt about the security of your connections, contact a

professional installer.

✎Install the TV close to the wall so that it does not fall.

✎It is safe to connect the string so that the clamps fixed on the

wall are equal to or lower than the clamps fixed on the TV.

Untie the string before moving the TV.

Kensington Lock

The Kensington Lock is not supplied by Samsung. It is a device

used to physically fix the system when using it in a public place.

Refer to the manual provided with the Kensington Lock for additional

information on proper use.

✎Please find a “

K

” icon on the rear of the TV. The Kensington

slot is beside the “

K

” icon.

✎The position and color may differ depending on the model.

Assembling the Cable manager

Display Modes (HDMI/DVI Input)

Optimal resolution

4003 series:1366 x 768@60Hz / 5003 series: 1920 x 1080@60Hz

Mode Resolution

Horizontal

Frequency

(KHz)

Vertical

Frequency

(Hz)

Pixel Clock

Frequency

(MHz)

Sync

Polarity

(H / V)

1366 x

768

1920 x

1080

IBM 640 x 350 31.469 70.086 25.175 +/-

c c

720 x 400 31.469 70.087 28.322 -/+

c c

MAC

640 x 480 35.000 66.667 30.240 -/-

c c

832 x 624 49.726 74.551 57.284 -/-

c c

1152 x 870 68.681 75.062 100.000 -/-

c

VESA DMT

640 x 480 31.469 59.940 25.175 -/-

c c

640 x 480 37.861 72.809 31.500 -/-

c c

640 x 480 37.500 75.000 31.500 -/-

c c

800 x 600 37.879 60.317 40.000 +/+

c c

800 x 600 48.077 72.188 50.000 +/+

c c

800 x 600 46.875 75.000 49.500 +/+

c c

1024 x 768 48.363 60.004 65.000 -/-

c c

1024 x 768 56.476 70.069 75.000 -/-

c c

1024 x 768 60.023 75.029 78.750 +/+

c c

1152 x 864 67.500 75.000 108.000 +/+

c

1280 x 720 45.000 60.000 74.250 +/+

c c

1280 x 800 49.702 59.810 83.500 -/+

c

1280 x 1024 63.981 60.020 108.000 +/+

c

1280 x 1024 79.976 75.025 135.000 +/+

c

1366 x 768 47.712 59.790 85.500 +/+

c c

1440 x 900 55.935 59.887 106.500 -/+

c

1600 x 900RB 60.000 60.000 108.000 +/+

c

1680 x 1050 65.290 59.954 146.250 -/+

c

1920 x 1080 67.500 60.000 148.500 +/+

c

Troubleshooting

If the TV seems to have a problem, rst review this list of possible problems and solution. If none of these troubleshooting tips apply, visit

samsung.com, then click on Support, or call Samsung customer service at 1-800-SAMSUNG.

Problem Possible Solution

Flickering and Dimming If your Samsung Television is ickering or dimming sporadically, you may need to disable some of its energy efcient

features like the Eco Sensor or the Energy Saving feature. If you follow below step with your remote, you can turn

these features off or on.

yEnergy saving : User Menu → Setup → Eco Solution → Energy Saving

Component Connections /

Screen Color

If you nd that the color on your Samsung television’s screen is not correct or black and White, rst run a Self

Diagnosis on the TV to make sure there are no device issues.

ySelf Diagnosis : User Menu → Support → Self Diagnosis → Picture Test

yIf the test is ok, try making sure ;

yYour connections are all consistent. For example, if you’ve used the AV In jack on your TV, make sure you have

used the AV Out jack on your video source.

yTry making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled

Pb, Pr, and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the

video source to the blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on the TV.

Screen Brightness If you nd that the colors on your Samsung TV are correct but just a little too dark or bright, there are some settings

you should check before calling for a repair.

yBacklight, Contrast, Brightness, Sharpness, Color, Tint and so on. Go in to “Picture” on user Menu then try

adjusting options mentioned above.

Unwanted Powering off If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco

friendly No Signal Power Off feature.

First make sure you Sleep Timer is not accidentally set. The sleep timer allows you the comfort of falling asleep with

the TV still on but, turns it off after a certain period of time so as not to waste energy.

ySleep Timer : User Menu → Setup → Time → Sleep Timer

If the Sleep Timer is not activated, you may have engaged the No Signal Power Off or Auto Power Off feature.

yNo Signal Power Off : User Menu → Setup → Eco Solution → No Signal Power

yAuto Power Off : User Menu → Setup → Eco Solution → Auto Power Off

Trouble Powering On Before Turn on check red light on the right or left bottom of your TV. Press power on button on TV or remote

and it will blink about 5 times before turning on.

If you nd that you are having trouble powering on your Samsung television, there are a number of things to check

before making a call to the service department.

yIf you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you

press the power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your

keyboard or move the mouse. Then try turning your TV on.

If you’re sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If

you have a cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting a

signal. To test the signal output of your cable or satellite box, press the guide or info button on the cable or satellite

box remote control. If the screen displays the guide or info data, the problem is caused by the box.

Stand Assembly • If you have any trouble to assemble the stand though you refer to “Install the Stand” mentioned at separate guide.

Cannot find channel • Re-run plug and play.

Poor picture First, perform the Picture Test and to see if your TV is properly displaying the test image.

Go to MENU - Support - Self Diagnosis - Picture Test

If the test image is properly displayed, the poor picture may be caused by the source or signal.

The TV image does not look as good as

it did in the store.

• If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to

deliver HD (high denition) picture quality.

• Cable/Satellite subscribers: Try HD channels from the channel line up.

• Air/Cable Antenna connection: Try HD channels after performing Auto program.

✎Many HD channels are up scaled from SD(Standard Definition) contents.

• Adjust the Cable/Set top box video output resolution to 1080i or 720p.

The picture is distorted: macroblock

error, small block, dots, pixelization.

• Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports

and action movies.

• A weak signal can cause picture distortion. This is not a TV problem.

• Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.

Color is wrong or missing. • If you’re using a component connection, make sure the component cables are connected to the correct jacks.

Incorrect or loose connections may cause color problems or a blank screen.

There is poor color or brightness. • Adjust the Picture options in the TV menu. (go to Picture Mode / Color / Brightness / Sharpness)

• Adjust Energy Saving option in the TV menu. (go to MENU - Setup - Eco Solution - Energy Saving )

• Try resetting the picture to view the default picture setting. (go to MENU - Picture - Picture Reset)

Support Menu

Self Diagnosis

■

Picture Test: Use to check for picture problems. If the problem

continues to occur, check the color pattern.

■

Sound Test: Use the built-in melody sound to check for sound

problems.

■

Signal Strength: (digital channels only) An HD channel’s reception

quality is either perfect or the channels are unavailable. Adjust

your antenna to increase signal strength.

■

Reset: Reset all settings to the factory defaults.

✎The PIN input screen appears before the setup screen.

✎Enter your 4-digit PIN. Change the PIN using the Change

PIN option.

Software Upgrade

Software Upgrade can be performed by downloading the latest

firmware from samsung.com to a USB memory device.

HD Connection Guide

Refer to this information when connecting external devices to the TV.

Contact Samsung

View this information when your TV does not work properly or

when you want to upgrade the software. You can nd information

regarding our call centers and how to download products and

software.

Media Play

Enjoy photos, music and/or movie files saved on a

USB Mass Storage Class (MSC) device.

P

POWER

MEDIA.P

❑Connecting a USB Device

1. Turn on your TV.

2. Connect a USB device containing photo, music and/or movie files

to the USB jack on the side of the TV.

3. When USB is connected to the TV, you can select Media Play

(USB) in Application menu.

❑Using the Media Play Menu

SUM

'

Change Device

E Enter R Return

Media Play

Videos

1. Press the MENU button. Press the ▲ or ▼ button to select

Application, then press the ENTER

E

button.

2. Press the ▲ or ▼ button to select Media Play (USB), then press

the ENTER

E

button.

3. Press the ◄ or ► button to select an icon (Videos, Music,

Photos, Settings), then press the ENTER

E

button.

✎It might not work properly with unlicensed multimedia files.

✎Need-to-Know List before using Media Play (USB)

xThe file system supports FAT16, FAT32 and NTFS.

xCertain types of USB Digital camera and audio devices may not

be compatible with this TV.

xMedia Play only supports USB Mass Storage Class (MSC)

devices. MSC is a Mass Storage Class Bulk-Only Transport

device. Examples of MSC are Flash Card Readers. Devices

should be connected directly to the TV’s USB port. USB HDD is

not supported.

xBefore connecting your device to the TV, please back up your

files to prevent them from damage or loss of data. SAMSUNG is

not responsible for any data file damage or data loss.

xA USB device that requires high power (more than 0.5A) may not

be supported.

xDo not disconnect the USB device while it is loading.

xThe higher the resolution of the image, the longer it takes to

display on the screen.

xThe maximum supported JPEG resolution is 15,360 x 8,704

pixels.

xIf a file is corrupted or the TV does not support the file type, the

“Not Supported File Format” message appears.

xThe TV cannot play MP3 files with DRM that have been

downloaded from a for-pay site. Digital Rights Management

(DRM) is a technology that supports the creation, distribution,

and management of digital content in an integrated and

comprehensive way, including protecting the rights and interests

of content providers, preventing illegal copying of contents, and

managing billings and settlements.

xPTP device is not supported.

xIf the device is over-powered while connecting or using a USB

device, the device may not be recognized or may malfunction.

xIf the TV has no input during the time set in Auto Protection

Time, the Screensaver will run.

xThe power-saving mode of some external hard disk drives may

be released automatically when your connect them to the TV.

xIf you use a USB extension cable, the TV may not recognize the

USB device or may not be able to read the files on the device.

xIf a USB device connected to the TV is not recognized, the list of

files on the device is corrupted, or a file in the list is not played,

connect the USB device to a PC, format the device, and check

the connection.

xIf a file you deleted from the PC is still found when you run Media

Play, use the “Empty the Recycle Bin” function on the PC to

permanently delete the file.

xPhotos only supports sequential jpeg format.

xThe scene search and thumbnail functions are not supported in

the Videos.

xIf the number of files and folders saved on a USB storage device

is approximately over 4000, the files and folders may not appear

and some folders may not be opened.

xThe maximum displayed number of files, including sub folders, in

one folder of USB storage device is 2000.

xThe media may not be playing smoothly when using the device

lower than USB 2.0.

Specifications

Environmental Considerations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

50°F to 104°F (10°C to 40°C)

10% to 80%, non-condensing

-4°F to 113°F (-20°C to 45°C )

5% to 95%, non-condensing

Model Name UN22ES4003 UN32EH4003 UN39EH5003

Display Resolution 1366 x 768 1920 x 1080

Screen Size

(Diagonal)

22" Class

(21.5" measured diagonally)

32" Class

(31.5" measured diagonally)

39" Class

(38.5" measured diagonally)

Sound

Output 3W x 2 5W x 2 10W x 2

Dimensions (W x H x D)

Body

With stand

20.4 X 12.5 X 1.9 inches

(518.9 X 319.7 X 49.0 (mm))

20.4 X 13.9 X 4.8 inches

(518.9 X 354.1 X 123.4 (mm))

29.0 X 17.4 X 3.6 inches

(738.4 X 444.0 X 93.2 (mm))

29.0 X 19.5 X 7.5 inches

(738.4 X 497.7 X 191.7 (mm))

35.2 X 20.9 X 3.6 inches

(895.9 X 532.5 X 93.2 (mm))

35.2 X 23.2 X 8.9 inches

(895.9 X 589.3 X 227.6 (mm))

Weight

Without Stand

With Stand

7.0 Ibs (3.2 kg)

7.2 Ibs (3.3 kg)

11.9 Ibs (5.4 kg)

13.2 Ibs (6.0 kg)

17.1 Ibs (7.8 kg)

21.6 Ibs (9.8 kg)

✎Design and specifications are subject to change without prior notice.

✎This device is a Class B digital apparatus.

✎For information about the power required and more about power consumption, refer to the label attached to the product.

✎Typical power consumption is measured according to Energy Star Program requirements for televisions.

■

JACK PANEL DETAIL / REAR VIEW

UN22ES4003

1

2

3

4

5

7

6

12

3

4

5

7

6

UN22ES4003 (Unit:

inches

)

18.7

22.9

32.9

44.3

52.2

69.1

76.4

UN32EH4003 / UN39EH5003

1

2

3

4

5

7

6

12

3

4

5

7

6

NOTE: All drawings are not necessarily to scale. Some dimensions are subject to

change without prior notice. Refer to the dimensions prior to performing installation of

your TV. Not responsible for typographical or printed errors.

© 2012 Samsung Electronics America, Inc

UN32EH4003 (Unit:

inches

)

110.5

27.8

37.8

43.4

53.9

619.0

77.7

UN39EH5003 (Unit:

inches

)

113.6

27.8

37.8

45.2

55.6

623.5

710.7

[UE4003-ZC]BN68-04466A-02ENG-1016.indd 2 2013-10-16 오전 9:12:25