Samsung Un58H5005Afxza Users Manual

Manual %5BUH5005-ZA%5DBN68-06547D-01ENG-0805 Samsung UN58H5005AFXZA LED H5005 Series TV User Manual | Manual Device

: Samsung Samsung-Un58H5005Afxza-Users-Manual-732063 samsung-un58h5005afxza-users-manual-732063 samsung pdf

Open the PDF directly: View PDF .
Page Count: 24

LED TV

user manual

E-MANUAL

© 2014 Samsung Electronics Co., Ltd. All rights reserved.

Thank you for purchasing this Samsung product.

To receive more complete service, please register

your product at

www.samsung.com/register

Model ____________ Serial No. _____________

✎If you have any questions, please call us at 1-800-SAMSUNG (1-800-726-7864) for assistance.

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care

center.

Country Customer Care

Center

Web Site Address

CANADA 1-800-SAMSUNG

(726-7864)

www.samsung.com/ca/support

(English)

www.samsung.com/ca_fr/support

(French)

Samsung Electronics Canada Inc. 2050

Derry Road West, Mississauga, Ontario

L5N 0B9 Canada

U.S.A 1-800-SAMSUNG

(726-7864)

www.samsung.com/us/support Samsung Electronics America, Inc. 85

Challenger Road Ridgefield Park, NJ

07660

BN68-06547D-01

[UH5005-ZA]BN68-06547D-00ENG.indb 1 2014-08-05  10:11:47

Important Safety Instructions

• The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure

reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be

blocked or covered.

‐ Do not cover the slots and openings with a cloth or other materials.

‐ Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.

‐ Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation

is provided.

• Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.

• Do not place a vessel containing water (vases etc.) on this apparatus, as this can result in a risk of fire or electric

shock.

• Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub,

in a wet basement, or near a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an

authorized dealer immediately.

• Make sure to pull out the power cord from the outlet before cleaning.

• This apparatus use batteries. In your community, there might be regulations that require you to dispose of these

batteries properly to protect the environment. Please contact your local authorities for disposal or recycling

information.

• Do not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in fire or electric

shock.

• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or

against them. Pay particular attention to cords at the plug end, where connected to adaptors, and at the point where

they exit from the apparatus.

• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time,

unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to

lightning and power line surges.

• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC

adaptor corresponds to the local electrical supply (depending on the model).

Warning! Important Safety Instructions

This symbol indicates that high voltage is

present inside. It is dangerous to make any

kind of contact with any internal part of this

product.

This symbol indicates that important

literature concerning operation and

maintenance has been included with this

product.

Please read the safety instructions below before installing and using the product.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR BACK). THERE ARE NO USER

SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO

QUALIFIED PERSONNEL.

RISK OF ELECTRIC SHOCK. DO NOT OPEN.

English - 2

[UH5005-ZA]BN68-06547D-00ENG.indb 2 2014-08-05  10:11:47

• Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.

• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.

• Make sure to plug the power cord in until it is firmly inserted. Pull on the plug, not the cord, when removing the power

cord from the outlet. Do not touch the power cord with wet hands.

• If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it -

unplug it immediately and contact an authorized dealer or service center.

• Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an

extended period of time (especially when children, elderly, or disabled people will be left alone in the house).

‐ Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate

sparks and heat, or cause the insulation to deteriorate.

• Be sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low

temperatures, high humidity, chemical substances or where it will operate for 24 hours a day such as in an airport, a train

station, etc. Failure to do so may cause serious damage to your set.

• Use only a properly grounded plug and receptacle.

‐ An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

• To turn off the apparatus completely, you must pull the power plug out of the wall socket. Consequently, the power

plug should be readily accessible at all times.

• Do not allow children to hang on the product.

• Store the accessories (batteries, etc.) in a location safely out of the reach of children.

• Do not install the product in an unstable location such as a shaky self, a slanted floor, or a location exposed to

vibration.

• Do not drop or impart a shock to the product. If the product is damaged, disconnect the power cord and contact a

service center.

• To clean the product, unplug the power cord from the power outlet and wipe the product using a soft cloth dipped

in a small amount of water. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air

freshener, lubricant or detergent. These chemicals candamage the appearance or erase the printing on the product.

• Do not expose the apparatus to dripping or splashing.

• Do not dispose of batteries in a fire.

• Do not short circuit, disassemble, or overheat the batteries.

• There is a danger of explosion if you replace the batteries with the wrong type of battery. Replace only with the same

or equivalent type.

• WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM

THIS PRODUCT AT ALL TIMES.

English - 3

[UH5005-ZA]BN68-06547D-00ENG.indb 3 2014-08-05  10:11:48

A detailed User’s Manual is built into your TV. For more information about how to view this e-Manual, see page 11.

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product

appearances. Product design and specifications may be changed without notice.

Still image warning

Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, the panorama

or 4:3 image format, stock or news bars at the screen bottom etc.) on the screen. Displaying still images for long

periods of time can cause image burn-in, which will affect image quality. To reduce risk of this effect, follow the

recommendations below:

• Avoid displaying the same TV channel for long periods.

• Try to display images in full screen mode. Use the TV's picture format menu or the remote's P.Size button to adjust

the size of the picture so that images fill the screen.

• Reduce brightness and contrast values to the minimum required to achieve desired picture quality. Exceeding these

values may speed up the burn-in process.

• Frequently use all TV features designed to reduce image retention and screen burn-in. Refer to the proper section of

the e-manual for details.

Providing Proper Ventilation for Your TV

When you install your TV, maintain a distance of at least 4 inches between the TV and other objects (walls, cabinet sides,

etc.) to ensure proper ventilation. Failing to maintain proper ventilation may result in a fire or a problem with the product

caused by an increase in its internal temperature.

✎

Whether you install your TV using a stand or a wall-mount, use parts provided by Samsung Electronics only.

• If you use parts provided by another manufacturer, it may cause difficulties with the product or result in injury

caused by the product falling.

Installation with a stand. Installation with a wall-mount.

4 inches

4 inches

4 inches 4 inches

4 inches

4 inches

4 inches

List of Features

• Media Play: Media Play lets you access, view, or play photos, videos, or music located on USB devices, digital

cameras, cell phones, and PCs.

• e-Manual: Provides a detailed, on-screen user's manual built into your TV. See page 11.

English - 4

[UH5005-ZA]BN68-06547D-00ENG.indb 4 2014-08-05  10:11:48

Accessories and Cables

✎

Please make sure the following items are included with your TV. If any items are missing, contact your dealer.

✎

The items’ colors and shapes may vary depending on the model.

✎

Check that there are no accessories hidden behind or under packing materials after you open the box.

• Remote Control & Batteries (AAA x 2)

• Owner’s Instructions

• Power Cord

• Warranty Card / Regulatory Guide

• Cable Holder Assembling the Cable Holder

Input Cables (Sold Separately)

To purchase an HDMI cable, contact www.SamsungParts.com.

HDMI HDMI-DVI

Component Composite (AV) Coaxial (RF)

✎

Make sure you have the correct cable before plugging it in. Illustrations of common plugs and jacks are below.

Cable Plugs Ports/Jacks Do not insert cable plugs in the wrong or

opposite direction. You can damage the TV

port/jack.

HDMI

USB

Optical

✎

For the best cable connection to this product, use cables no thicker than the cable illustrated below:

• Maximum thickness - 0.55 inches (14mm)

English - 5

[UH5005-ZA]BN68-06547D-00ENG.indb 5 2014-08-05  10:11:50

Making Connections

Connect your TV to an antenna or cable connection, and then connect your peripherals. When done, connect the

power cord to the TV, and then connect the power cord to an AC wall outlet. If you are connecting your TV to a cable

or satellite box using HDMI, Component, or Composite connections, you do not need to connect the ANT IN jack to an

antenna or a cable connection.

• For the best picture and audio quality, connect digital devices using an HDMI cable.

• If you connect an external device to the TV that uses an older version of HDMI, the video and audio may not work. If this occurs,

ask the manufacturer of the device about the HDMI version and, if it is out of date, request an upgrade.

• Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur.

• PC/DVI AUDIO IN input is not supported.

• For a set-top box connection using an HDMI cable, we highly recommend you connect the cable to the HDMI IN 1(STB) port.

• For an HDMI to DVI cable connection, you must use the HDMI IN 2(DVI) jack.

• If you connect a device to the HDMI IN 2(DVI) port using an HDMI to DVI cable, the audio will not work. DVI does not transmit

audio. You must add a separate audio connection.

• For PCs with DVI video out jacks, use an HDMI to DVI cable to connect the DVI out on the PC to the HDMI IN 2(DVI) jack on the

TV. Use the PC's speakers for audio.

HDMI OUT

DVI OUT

OPTICAL

AUDIO OUT

R-AUDIO-L

VIDEO OUT

Y

Y

WR

RW

AUDIO OUT

R-AUDIO-L

PRPBY

COMPONENT OUT

R B R

G

RB

R

G

WR

RW

R W

AUDIO IN

R-AUDIO-L

VHF/UHF

Antenna

Cable

or

TV Rear Panel

TV Side Panel

VCR

AV connection

Blu-ray player / DVD

Component connection

Set-top box / Blu-ray player

HDMI connection

PC connection

(Using an HDMI (to DVI) Cable)

Digital Audio System

Audio connection

✎

The position of the port may

differ depending on the model.

✎

Using two-way radio mobile or portable

units, amateur radio, or AM radio near

your TV may cause the TV to malfunction.

USB connection

The TV does not support HDDs

(Hard Disk Drives) connected to

the USB port.

Amplifier /

DVD home theater

English - 6

[UH5005-ZA]BN68-06547D-00ENG.indb 6 2014-08-05  10:11:50

HDMI Input Display Modes.

If you have attached your TV to a PC (or other external device) through an HDMI port, you can select one of the

standard resolutions listed in the Resolution column for your PC's video output. The TV will automatically adjust to

the resolution you choose. However, we recommend setting your PC (or other external device) to the TV's optimal

resolution. The optimal resolution for Series 4 TVs is 1024 x 768@60Hz. The optimal resolution for Series 5 TVs is 1920 x

1080@60 Hz.

Mode Resolution Horizontal Frequency

(KHz) Vertical Frequency (Hz) Pixel Clock Frequency

(MHz)

Sync Polarity

(H / V) 1024 x 768 1920 X 1080

IBM 720 x 400 31,469 70,087 28,322 -/+

c c

MAC

640 x 480 35,000 66,667 30,240 -/-

c c

832 x 624 49,726 74,551 57,284 -/-

c c

1152 x 870 68,681 75,062 100,000 -/-

c

VESA

DMT

640 x 480 31,469 59,940 25,175 -/-

c c

640 x 480 37,861 72,809 31,500 -/-

c c

640 x 480 37,500 75,000 31,500 -/-

c c

800 x 600 37,879 60,317 40,000 +/+

c c

800 x 600 48,077 72,188 50,000 +/+

c c

800 x 600 46,875 75,000 49,500 +/+

c c

1024 x 768 48,363 60,004 65,000 -/-

c c

1024 x 768 56,476 70,069 75,000 -/-

c c

1024 x 768 60,023 75,029 78,750 +/+

c c

1152 x 864 67,500 75,000 108,000 +/+

c

1280 x 720 45,000 60,000 74,250 +/+

c

1280 x 800 49,702 59,810 83,500 -/+

c

1280 x 1024 63,981 60,020 108,000 +/+

c

1280 x 1024 79,976 75,025 135,000 +/+

c

1366 x 768 47,712 59,790 85,500 +/+

c

1440 x 900 55,935 59,887 106,500 -/+

c

1600 x 900RB 60,000 60,000 108,000 +/+

c

1680 x 1050 65,290 59,954 146,250 -/+

c

1920 x 1080 67,500 60,000 148,500 +/+

c

✎

The interlaced mode is not supported.

✎

The TV might operate abnormally if you select a non-standard video format.

English - 7

[UH5005-ZA]BN68-06547D-00ENG.indb 7 2014-08-05  10:11:51

Installing the Batteries Into the Remote

Installing batteries (Battery size: AAA)

✎

NOTE

• Install the batteries so that the polarity of the batteries (+/-)

matches the illustration in the battery compartment.

• Use the remote control within 23 feet of the TV.

• Bright light may affect the performance of the remote

control. Avoid using when near fluorescent lights or neon

signs.

• The color and shape may vary depending on the model.

The Remote Control Buttons

✎

This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually

impaired persons.

Press to select additional digital

channels being broadcasted by the

same station. For example, to select

channel ‘54-3’, press ‘54’, then press

‘-’ and ‘3’.

Return to the previous channel.

Turn on the backlight for the buttons.

When on, the buttons become

illuminated for a moment when

pressed. (Using the remote control

with this button set to On will reduce

the battery usage time.)

Press to directly access to channels.

Turns the TV on and off.

Use these buttons when using a

specific feature.

E-MANUAL: Displays the e-Manual.

P.SIZE: Lets you choose the picture

size.

CC: Controls the caption

decoder.

Cut off the sound temporarily.

Automatically shuts off the TV at a

preset time.

Displays the channel list on the screen.

Displays information on the TV screen.

Quickly select frequently used

functions.

Moves the cursor, selects the on-

screen menu items, and changes the

values seen on the menu.

Exit the menu.

Press to return to the previous menu.

Press to display and select the available

video sources.

Use these buttons according to the

directions on screen.

Change channels.

Displays the main on-screen menu.

View Media Play.

Adjusts the volume.

MEDIA.P

SLEEP

English - 8

[UH5005-ZA]BN68-06547D-00ENG.indb 8 2014-08-05  10:11:52

Changing the Input Source

Source

When you are watching TV and you want to watch a movie on your DVD player or Blu-ray player or

switch to your cable box or STB satellite receiver, you need to change the Source.

1. Press the SOURCE button on your remote.

2. Select a desired external input source.

■TV / HDMI1 / HDMI2/DVI / AV / Component

✎

You can only choose external devices that are connected to the TV. In the Source list, connected

inputs are highlighted.

How to Use Edit Name

Edit Name lets you associate a device name to an input source, for example, Blu-ray to HDMI 1 To access Edit Name,

press the TOOLS button when the Source list is displayed. The following selections appear under Edit Name:

VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV

/ Blu-ray / HD DVD / DMA

Select the name of the device connected to each input jack to make your input source selection easier. When you view

the Source list,the device name and the input jack will be displayed together.

✎

If you have connected a PC to the HDMI IN 2(DVI) port with an HDMI cable, select PC under Edit Name when you

enter a device name.

✎

If you have connected a PC to the HDMI IN 2(DVI) port with an HDMI to DVI cable, select DVI PC under Edit Name

when you enter a device name.

✎

If you connected an AV device to the HDMI IN 2(DVI) port with an HDMI to DVI cable, select DVI Devices under

Edit Name when you enter a device name.

Information (in the Edit Name function)

Displays detailed information about the connected external device.

Configuring the Basic Settings in Initial Setup

When you turn the TV on for the first time, a sequence of screens and on-screen prompts will assist you in configuring

the TV’s basic settings. Plug the power cord into a wall outlet, and then press the POWER button to turn on the TV.

Configure your TV's basic settings in the initial setup by following the instructions on your TV's screen.

✎

Setup is available only when the Source is set to TV.

✎

If you are not using a cable box or satellite box, make you sure have connected the TV to an antenna or cable

connection before you turn on the TV.

If You Want to Re-run Setup...

O

MENU → System → Setup → ENTER

E

English - 9

[UH5005-ZA]BN68-06547D-00ENG.indb 9 2014-08-05  10:11:52

Your TV’s Main and Tools menus contains functions that let

you control the TV’s features. For example, in the Main menu

you can change the size and configuration of the picture, its

brightness, its contrast and so on. There are also functions

that let you control the TV’s sound, channel configuration,

energy use, and a host of other features. To access the main,

on-screen menu, press the MENU (m) button on your

remote. To access Tools menus, press the TOOLS button.

Tools menus are available when the TOOLS menu Icon is

displayed on the bottom right of the screen.

The illustration below displays the buttons on the remote you

use to navigate the menus and select and adjust different

functions.

FÚTBOL

FÚ

TB

O

L

MEDIA

.

P

GU

IDE

1 MENU button: Displays the main on-screen menu.

2 ENTERE and Direction buttons: Use the Direction

buttons to move the cursor and highlight an item. Use

the Enter button to select an item or confirm the setting.

3 RETURN button: Returns to the previous menu.

4 EXIT button: Exits the on-screen menu.

5 TOOLS button: Displays the Tools menus when available.

How to Operate the Main Menu (OSD - On Screen Display)

The access steps may differ depending on the menu option

you select.

1MENU The main menu options appear

on the screen:

Picture, Sound, Broadcasting,

Applications, System, Support.

2▲ / ▼ Select a main menu option on

the left side of the screen with

the ▲ or ▼ button.

3ENTER

E

Press ENTER

E

to access the

sub-menus.

4▲ / ▼ Select the desired submenu with

the ▲ or ▼ button.

5◄ / ► Adjust the value of an item

with the ◄ or ► button. The

adjustment in the OSD may

differ depending on the selected

menu.

6ENTER

E

Press ENTER

E

to confirm the

selection.

7EXIT

e

Press EXIT.

Using the TV’s Controller (Panel Key)

You can turn on the TV using the Remote Control or the TV’s Controller, a small joystick-like button on the back of the

TV in its lower-left corner. You can also use the TV's Controller to operate the TV without the Remote Control.

Remote control sensor

TV Controller

The image is drawn as if you are

facing the front side of the TV.

Function menu

Return

Select Media Play

Select a Source

Power Off

Select the Menu

✎

To close the Menu, Media Play, or Source screens, press the Controller for more than 1 second.

✎

When selecting a function by moving the controller backwards, forwards, left, or right, be sure not to press up on

the controller. If you press up first, it will not operate properly when you move it.

✎

The product color and shape may vary depending on the model.

Standby mode

Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be

safe and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are

away on vacation, for example). It is best to unplug the power cord.

How to Navigate Menus

English - 10

[UH5005-ZA]BN68-06547D-00ENG.indb 10 2014-08-05  10:11:53

How to View the e-Manual

E-MANUAL

You can find instructions for your TV’s features in the e-Manual in your TV. To use the e-Manual,

press the E-MANUAL button on your remote. Move the cursor using the right/left buttons to

highlight a main category. Use the up/down buttons to select a topic, and then press the ENTER

E

button. The e-Manual displays the page you want to see. To change pages, use the right/left

buttons.

You can also access the e-Manual through the menu:

O

MENU

m

→ Support → e-Manual → ENTER

E

✎

Many e-Manual topics provide a Try Now feature. Select Try Now to go to and try the

corresponding OSD Menu item.

✎

If you want to return to the e-Manual, press the E-MANUAL button on your remote.

✎

You can not use the Try Now function if the menu is not activated.

Screen Display

Basic Features

Changing the Preset Picture Mode

Adjusting Picture Settings

Changing the Picture Options

Changing the Preset Sound Modes

Adjusting Sound Settings

} Index E Enter e Exit

TV Screen: Displays the program,

movie, video, etc. you are

currently watching.

The category list. Press

l

or

r

button to select the category

you want.

Displays the sub-menu list.

Use the arrow buttons on your

remote to move the cursor.

Press the ENTER

E

button to

select the sub-menu you want.

Operation Buttons:

}

Blue (Index): Displays the index screen.

E

Enter: Select a category or sub-menu.

e

Exit: Exit the e-Manual.

How to toggle between an e-Manual topic and the corresponding OSD menu(s).

E-MANUAL

Try Now

a Try Now b Home { Zoom } Index L Page e Exit

Basic Features > Changing the Preset Picture Mode (1/1)

Picture

Picture Mode Standard

•Back Light 10

•Contrast 95

•Brightness 45

•Sharpness 50

•Color 50

•Tint (G/R) G50 R50

❑Changing the Preset Picture Mode

■Picture Mode t

OMENUm → Picture → Picture Mode → ENTERE

Picture modes apply preset adjustments to the picture. Select a mode using the

▲/▼ buttons, and then press ENTERE.

NWhen connecting a PC, you can only select Entertain and Standard.

●Dynamic: Suitable for a bright room.

●Standard: Suitable for a normal environment.

●Natural for LED TV : Suitable for an eye comfortable display.

●Movie: Suitable for watching movies in a dark room.

●Entertain: Suitable for watching movies and games.

NIt is only available when connecting a PC.

English

✎

This function is not enabled in some menus.

Method 1 Method 2

1. If you want to use the menu that corresponds to an

e-Manual topic, press the red button to select Try

Now.

2. To return to the e-Manual screen, press the

E-MANUAL button.

1. Press the ENTER

E

button when a topic is displayed.

“Do you want to execute this?” appears. Select

Yes, and then press the ENTER

E

button. The OSD

window appears.

2. To return to the e-Manual screen, press the

E-MANUAL button.

English - 11

[UH5005-ZA]BN68-06547D-00ENG.indb 11 2014-08-05  10:11:56

Viewing the Contents

a Try Now b Home { Zoom } Index L Page e Exit

Basic Features > Changing the Preset Picture Mode (1/1)

Contents Area: Contains the topic contents

if you selected a sub-menu. To move to

the previous or next page, press the

l

or

r

button.

Operation Buttons:

a

Red (Try Now): Press to display the OSD menu that corresponds to the topic. To return to the

e-Manual screen, press the E-MANUAL button.

b

Green (Home): Moves to the e-Manual home screen.

{

Yellow (Zoom): Magnifies a screen.

}

Blue (Index): Displays the Index screen.

L

(Page): Moves to the previous or next page.

e

(Exit): Exit the e-Manual.

❑Changing the Preset Picture Mode

■Picture Mode t

OMENUm → Picture → Picture Mode → ENTERE

Picture modes apply preset adjustments to the picture. Select a mode using the

▲/▼ buttons, and then press ENTERE.

NWhen connecting a PC, you can only select Entertain and Standard.

●Dynamic: Suitable for a bright room.

●Standard: Suitable for a normal environment.

●Natural for LED TV : Suitable for an eye comfortable display.

●Movie: Suitable for watching movies in a dark room.

●Entertain: Suitable for watching movies and games.

NIt is only available when connecting a PC.

English

Using the Zoom mode

When you are viewing an e-Manual instruction page,

press the

{

Yellow (Zoom) to magnify the screen. You

can scroll through the magnified screen by using the

u

or

d

buttons.

✎

To return the screen to normal size, press the

RETURN button.

U Move R Return

❑Changing the Preset Picture Mode

■Picture Mode t

OMENUm → Picture → Picture Mode → ENTERE

Picture modes apply preset adjustments to the picture. Select a mode using the

▲/▼ buttons, and then press ENTERE.

NWhen connecting a PC, you can only select Entertain and Standard.

●Dynamic: Suitable for a bright room.

●Standard: Suitable for a normal environment.

●Natural for LED TV : Suitable for an eye comfortable display.

●Movie: Suitable for watching movies in a dark room.

●Entertain: Suitable for watching movies and games.

NIt is only available when connecting a PC.

English

How to search for a topic on the index page

1. Press the Blue (Index) button on the remote. The Index screen appears.

2. To search for a topic, press the left or right arrow button to select a letter. The Index displays a list of topics and

keywords that begin with the letter you selected.

3. Press the up or down arrow button to select a topic or keyword you want, and then press the ENTER

E

button to

view the topic you want to see.

4. The e-Manual page with the topic appears.

✎

To close the Index screen, press the RETURN button.

English - 12

[UH5005-ZA]BN68-06547D-00ENG.indb 12 2014-08-05  10:11:57

Troubleshooting

If the TV seems to have a problem, first review this list of possible problems and solution. Also review the

Troubleshooting Section in the e-Manual. If none of the troubleshooting tips apply, visit www.samsung.com/support or

call Samsung customer Service.

Issues Solutions and Explanations

Flickering and Dimming If your Samsung Television is flickering or dimming sporadically, you may need

to disable some of its energy efficient features like the Eco Sensor or the Energy

Saving feature. Follow the steps below with your remote to turn these features off

or on.

• Energy Saving: User Menu → System → Eco Solution → Energy Saving

• Eco Sensor: User Menu → System → Eco Solution → Eco Sensor

Screen Color Wrong If the color on your Samsung television’s screen is not correct or black and white,

first run a Self Diagnosis on the TV to make sure there are no device issues.

• Self Diagnosis: User Menu → Support → Self Diagnosis → Picture Test

If the problem does not appear in the Test Picture, making sure :

• Your connections are all consistent. For example, if you’ve used the AV In jack on

your TV, make sure you have used the AV Out jack on your video source.

• You have connected your devices to the correct jacks. For example, if you use

the Component jacks, labeled Pb, Pr, and Y, to connect your TV and video

source, make sure you have connected the blue Pb jack on the video source to

the blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on

the TV, and the yellow Y jack on video source to the yellow Y jack on the TV.

Screen Brightness If the colors on your Samsung TV are correct but just a little too dark or bright, try

adjusting the following settings in the Picture option of the Main menu:

• Back Light, Contrast, Brightness, Sharpness, Color, Tint (G/R) and so on.

Unwanted Powering Off If your Samsung TV appears to turn off by itself, there may be an issue with either

your Timer settings or your Eco friendly No Signal Power Off feature.

First make sure the Sleep Timer is not accidentally set. The sleep timer turns the TV

off after a certain period of time.

• Sleep Timer: User Menu → System → Time → Sleep Timer

If the Sleep Timer is not activated, you may have engaged the No Signal Power Off

or Auto Power Off feature. To turn these features off, follow the steps below with

your remote.

• No Signal Power Off : User Menu → System → Eco Solution → No Signal Power

Off

• Auto Power Off: User Menu → System → Eco Solution → Auto Power Off

Trouble Powering On Before you turn the TV on, find the red light on the bottom right or left of your TV.

Press the power button on the TV or remote. The light should blink about 5 times

before the TV turns on.

If you are having trouble powering on your Samsung television, there are a number

of things to check before making a call to the service department.

• If you are using the TV as a monitor and the stand-by light only blinks for a few

seconds when you press the power button, your PC is in sleep mode. To take

your PC out of sleep mode, press a key on your keyboard or move the mouse.

Then try turning your TV on.

If you’re sure your power cord, remote control, and PC are functioning properly,

you may be having a cable issue. If you have a cable or satellite box, your TV may

appear to be off because the cable or satellite box is not outputting a signal. To

test the signal output of your cable or satellite box, press the guide or info button

on the cable or satellite box remote control. If the screen displays the guide or info

data, the problem is caused by the box.

Cannot Find a Channel Re-run Setup (Go to Menu - System - Setup) or run Auto Program. (Go to MENU -

Broadcasting - Auto Program).

English - 13

[UH5005-ZA]BN68-06547D-00ENG.indb 13 2014-08-05  10:11:57

Issues Solutions and Explanations

Poor picture

First, perform the Picture Test and to see if your TV is properly displaying the test

image.

• Go to MENU - Support - Self Diagnosis - Picture Test

If the test image is properly displayed, the poor picture may be caused by the

source or signal.

The TV image does not look as

good as it did in the store.

Store displays are typically tuned to digital, HD (high definition) channels.

• If you have an analog cable/satellite box, upgrade to a digital set top box. Use

HDMI or Component cables to deliver HD (high definition) picture quality.

• Cable/Satellite subscribers: Try HD channels from the channel line up.

• Air/Cable Antenna connection: Try HD channels after performing an Auto

program.

✎Many HD channel programs are up scaled from SD (Standard Definition)

content. Look for a channel that is broadcasting true HD content.

• Adjust the Cable/Set top box video output resolution to 1080i or 720p.

The picture is distorted:

macroblock error, small block,

dots, pixelization.

• The compression of video contents may cause picture distortion, especially in

programs with fast moving pictures such as sports programs and action movies.

• A weak signal can cause picture distortion. This is not a TV problem.

• Mobile phones used close to the TV (within 3.3 ft) may cause noise in the

picture on analog and digital channels.

Color is wrong or missing. • If you’re using a Component connection, make sure the component cables are

connected to the correct jacks. Incorrect or loose connections may cause color

problems or a blank screen.

There is poor color or brightness. • Adjust the Picture options in the TV menu. (go to Picture Mode / Color /

Brightness / Sharpness)

• Adjust the Energy Saving option in the TV menu (go to MENU - System - Eco

Solution - Energy Saving)

• Try resetting the picture to the default picture settings. (go to MENU - Picture -

Reset Picture)

There is a dotted line on the edge

of the screen.

• If the picture size is set to Screen Fit, change it to 16:9.

• Change the cable/satellite box resolution.

The picture is black and white. • If you are using an AV composite input, connect the video cable (yellow) to the

Green jack of Component input 1 on the TV.

When changing channels, the

picture freezes or is distorted or

delayed.

• If the TV is connected to a cable box, reset the box. (Disconnect and then

reconnect the AC cord, and then wait until the cable box reboots. It may take

up to 20 minutes.)

• Set the output resolution of the cable box to 1080i or 720p.

Sound Problem

First, perform the Sound Test to determine if your TV audio is operating properly.

• Go to MENU - Support - Self Diagnosis - Sound Test

If the audio is OK, the sound problem may be caused by the source or signal.

There is no sound or the sound is

too low at maximum volume.

• Please check the volume control of the device (Cable/Sat Box, DVD, Blu-ray,

etc.) connected to your TV.

The picture is good but there is

no sound.

• Set the Speaker Select option to TV Speaker in the Sound menu.

• If you are using an external device, check the device’s audio output option (Ex.

You may need to change your cable box’s audio option to HDMI if you have the

box connected to your TV using an HDMI cable.).

• If you are using a DVI to HDMI cable, a separate audio cable is required.

• Reboot the connected device by disconnecting and then reconnecting the

device’s power cable.

The speakers are making an

inappropriate noise.

• Check the cable connections. Make sure a video cable is not connected to an

audio input.

• For Antenna or Cable connections, check the signal information. A weak signal

may cause sound distortion.

• Perform the Sound Test as explained above.

English - 14

[UH5005-ZA]BN68-06547D-00ENG.indb 14 2014-08-05  10:11:58

Issues Solutions and Explanations

No Picture, No Video

The TV will not turn on. • Make sure the AC power cord is securely plugged into the wall outlet and the

T V.

• Make sure the wall outlet is working.

• Try pressing the POWER button on the TV to make sure the problem is not

the remote control. If the TV turns on, refer to ‘Remote control does not work’

below.

The TV turns off automatically. • Ensure the Sleep Timer is set to Off in the System menu.

• If your PC is connected to the TV, check your PC's power settings.

• Make sure the AC power cord is plugged in securely to the wall outlet and the

T V.

• When you are watching TV programs from an antenna, the TV will turn off after

10 - 15 minutes if there is no signal.

There is no picture/video. • Check the cable connections. (Remove and reconnect all cables connected to

the TV and external devices).

• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to

match the connections to the TV input. For example, if an external device’s

output is HDMI, it should be connected to an HDMI input on the TV.

• Make sure your connected devices are powered on.

• Be sure to select the correct source on the TV by pressing the SOURCE button

on the remote control.

• Reboot the connected device by disconnecting and then reconnecting the

device’s power cable.

Antenna(Air / Cable) Connection

The TV is not receiving all

channels.

• Make sure the coaxial cable is connected securely.

• Run Auto Program to add available channels to the channel list. There are 3

options, STD, HRC, and IRC. Most cable systems use STD.

• Verify the antenna is positioned correctly.

No Caption on digital channels. • Check the Caption Setup menu. Try changing Caption Mode Service1 to CC1.

• Some channels may not have caption data.

The picture is distorted:

macroblock, error, small block,

dots, pixelization.

• The compression of video contents may cause picture distortion, especially in

programs with fast moving pictures such as sports programs and action movies.

• A weak signal can cause picture distortion. This is not a TV problem.

Others

Purple/green rolling horizontal

bars and buzzing noise from the

TV speakers with Component

cable connection.

• Remove the left and right audio connections from the set-top-box. If the

buzzing stops, this indicates that the set-top-box has a grounding issue. Replace

the Component video cables with an HDMI connection.

English - 15

[UH5005-ZA]BN68-06547D-00ENG.indb 15 2014-08-05  10:11:58

Issues Solutions and Explanations

The picture will not display in full

screen.

• HD channels will have black bars on either side of the screen when displaying

up scaled SD (4:3) contents.

• Black bars will appear on the top and bottom of the screen when you watch

movies that have aspect ratios different from your TV.

• Adjust the picture size option on your external device or change the TV to full

screen.

The remote control does not

work.

• Replace the remote control batteries. Make sure you insert them with the plus

and minus ends in the correct direction.

• Clean the transmission window located on the top of the remote control.

• Try pointing the remote control directly at the TV from 5~6 feet away.

The cable/set top box remote

control does not turn the TV on

or off, or adjust the volume.

• Program the Cable/Set top box remote control to operate the TV. Refer to the

Cable/Set top box user manual for the SAMSUNG TV code.

A “Mode Not Supported”

message appears.

• Check the supported resolution of the TV and adjust the external device’s

output resolution accordingly. Refer to resolution settings in this manual.

Caption on the TV menu is

greyed out.

• You cannot select Caption in the TV menu when watching content from a

device connected via HDMI or Component.

• Turn on the Caption function of the external device.

There is a plastic smell from the

T V.

• This smell is normal and will dissipate over time.

TV Signal Information is

unavailable in the Self Diagnosis

Test menu.

• This function is only available for digital channels the TV receives from an

Antenna / RF/Coax connection.

TV is tilted to the right or left

side.

• Remove the stand base from the TV and reassemble it.

The Broadcasting menu is greyed

out (unavailable).

• The Broadcasting menu is only available when you select the TV source.

Your settings are lost after 5

minutes or every time the TV is

turned off.

• If TV is in the Store Demo mode, it will reset audio and picture settings every 5

minutes. To change the setting from Store Demo mode to Home Use, press the

SOURCE button to select TV mode, and then select MENU → Support → Use

Mode.

You have intermittent loss of

audio or video.

• Check the cable connections and reconnect them.

• Loss of audio or video can be caused by using overly rigid or thick cables. Make

sure the cables are flexible enough for long term use. If mounting the TV to the

wall, we recommend using cables with 90 degree connectors.

The PIP menu is not available. • PIP functionality is only available when you are using an HDMI or Component

source.

You see small particles when you

look closely at the edge of the

frame of the TV.

• This is part of the product’s design and is not a defect.

The POP (the TV’s internal

banner ad) appears on the

screen.

• Go to MENU → Support → Use Mode, and then select Home Use.

The message “This file may not

be played properly.” appears.

• This may appear because the content has a high bit rate. The content generally

will play, but could experience some playability issues.

✎

Some functions and pictures shown in this manual are available on specific models only.

✎

To keep your TV in optimum condition, upgrade to the latest firmware on the Samsung web site by USB (Go to

samsung.com → Support).

✎

This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce.

However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the

performance of the product.

English - 16

[UH5005-ZA]BN68-06547D-00ENG.indb 16 2014-08-05  10:11:58

Installing the Wall Mount (Optional)

Wall or Ceiling Mounting

If you mount this product on a wall, it should be mounted only as recommended by the manufacturer.

Unless it is correctly mounted, the product may slide or fall, causing serious injury to a child or adult, and

serious damage to the product.

Installing the Wall Mount Kit

The wall mount kit (sold separately) lets you mount the TV on the wall. For detailed information about installing the wall

mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall

mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if

you elect to install the wall mount on your own.

To order the wall mount, contact Samsung Customer Care.

Wall Mount Kit Specifications (VESA)

Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than

plaster board, please contact your nearest dealer for additional information. If you install the TV on a ceiling or slanted

wall, it may fall and result in severe personal injury.

✎

NOTE

• Standard dimensions for wall mount kits are shown in the table below.

• Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.

• Do not use screws that do not comply with the VESA standard screw specifications.

• Do not use screws that are longer than the standard length or do not comply with the VESA standard screw

specifications. Screws that are too long may cause damage to the inside of the TV set.

• For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may

differ depending on the wall mount specifications.

• Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to

personal injury. Samsung is not liable for these kinds of accidents.

• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is

used or the consumer fails to follow the product installation instructions.

• Do not mount the TV at more than a 15 degree tilt.

• Always have two people mount the TV on a wall.

Product Family TV size in

inches

VESA screw hole specs

(A * B) in millimeters Standard Screw Quantity

LED-TV 58 400 X 400 M8 4

✎

Remove the screws in the mounting holes before you install the wall mount.

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due

to electric shock.

English - 17

[UH5005-ZA]BN68-06547D-00ENG.indb 17 2014-08-05  10:11:58

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your

children do not hang over or destabilize the TV. Doing so may cause the TV to tip over, resulting in serious

injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability,

install the anti-fall device for safety purposes, as follows.

To prevent the TV from falling

Since the necessary clamps, screws, and string are not supplied,

please purchase these additionally.

1. Drive the screws into the clamps and firmly fasten them onto

the wall. Make sure the screws are firmly fixed to the wall.

2. Remove the screws from the center back of the TV, put the

screws into the clamps, and then fasten the screws onto the

TV again.

3. Connect the clamps fixed to the TV and the clamps fixed to

the wall with a strong string and then tie the string tightly.

✎

Verify all connections are properly secured. Periodically

check connections for any sign of fatigue for failure.

If you have any doubt about the security of your

connections, contact a professional installer.

✎

Install the TV near to the wall so that it does not fall

backwards.

✎

Connect the string so that the clamps fixed to the wall

are even with or lower than the clamps fixed on the TV.

Untie the string before moving the TV.

Wall

English - 18

[UH5005-ZA]BN68-06547D-00ENG.indb 18 2014-08-05  10:11:59

Anti-theft Kensington Lock

A Kensington Lock is a device you can use to physically fix

your TV in place when using it in a public place. You wrap

the Kensington Lock’s cable around a large, immobile

object and then attach the lock to the Kensington slot on

the back of the TV.

The appearance and locking method may differ from

the illustration below depending on the manufacturer.

Refer to the manual provided with the Kensington Lock

for additional information on proper use. The Kensington

Lock is not supplied by Samsung.

✎

Please find a “

K

” icon on the rear of the TV. A

Kensington slot is beside the “

K

” icon.

✎

The position and color may differ depending on the

model.

<Optional>

To lock the product, follow these steps:

1. Wrap the Kensington lock cable around a large,

stationary object such as desk or chair.

2. Slide the end of the cable with the lock attached

through the looped end of the Kensington lock cable.

3. Insert the locking device into the Kensington slot on

the product.

4. Lock the lock.

✎

These are general instructions. For exact instructions,

see the User manual supplied with the locking device.

✎

The locking device has to be purchased separately.

Storage and Maintenance

✎

If a sticker was attached to the TV screen, some

debris can remain after you remove the sticker.

Please clean the debris off before watching TV.

✎

The exterior and screen of the product can get

scratched during cleaning. Be sure to wipe the

exterior and screen carefully using a soft cloth to

prevent scratches.

Do not spray water directly onto

the product. Any liquid that goes

into the product may cause a

failure, fire, or electric shock.

Clean the product with a soft

cloth dipped in a small amount

of water. Do not use a flammable

liquid (e.g. benzene, thinners) or

a cleaning agent.

License

Manufactured under license from Dolby

Laboratories. Dolby and the double-D

symbol are trademarks of Dolby

Laboratories.

Manufactured under a license from U.S.

Patent No’s: 5,956,674, 5,974,380,

5,978,762, 6,487,535, 6,226,616,

7,212,872, 7,003,467, 7,272,567,

7,668,723, 7,392,195, 7,930,184,

7,333,929 and 7,548,853. DTS, the

Symbol, and DTS and the Symbol together

are registered trademarks & DTS Premium

Sound | 5.1 is a trademark of DTS, Inc.

©2012 DTS, Inc. All Rights Reserved.

Manufactured under a license from U.S.

Patent No’s: 6,285,767, 8,027,477,

5,319,713, 5,333,201, 5,638,452,

5,771,295, 5,970,152, 5,912,976,

7,200,236, 7,492,907, 8,050,434,

7,720,240, 7,031,474, 7,907,736 and

7,764,802. DTS, the Symbol, and DTS

and the Symbol together are registered

trademarks & DTS Studio Sound is a

trademark of DTS, Inc. ©2012 DTS, Inc. All

Rights Reserved.

The terms HDMI and HDMI High-Definition

Multimedia Interface, and the HDMI Logo

are trademarks or registered trademarks of

HDMI Licensing LLC in the United States

and other countries.

DivX Certified® to play DivX® video up to

HD 1080p, including premium content.

ABOUT DIVX VIDEO: DivX® is a digital video format created by

DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX

Certified® device that plays DivX video. Visit divx.com for more

information and software tools to convert your files into DivX

videos.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device

must be registered in order to play purchased DivX Video-on-

Demand (VOD) movies. To obtain your registration code, locate

the DivX VOD section in your device setup menu. Go to vod.divx.

com for more information on how to complete your registration.

Covered by one or more of the following U.S. patents : 7,295,673;

7,460,668; 7,515,710; 7,519,274

DivX®, DivX Certified® and associated logos are trademarks of

Rovi Corporation or its subsidiaries and are used under license.

Open source license notice

In the case of using open source software, Open Source Licenses

are available on the product menu.

Open Source License Notice is written only English.

English - 19

[UH5005-ZA]BN68-06547D-00ENG.indb 19 2014-08-05  10:12:00

Specifications

Environmental Considerations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

50°F to 104°F (10°C to 40°C)

10% to 80%, non-condensing

-4°F to 113°F (-20°C to 45°C)

5% to 95%, non-condensing

Model Name UN58H5005

Display Resolution 1920 x 1080

Screen Size

(Diagonal)

58” Class

(57.5 measured diagonally)

Sound

(Output) 10W x 2

Dimensions (W x H x D)

Body

With stand

51.4 x 30.3 x 3.5 inches

(1308.0 x 770.4 x 91.2 mm)

51.4 x 33.2 x 11.6 inches

(1308.0 x 843.4 x 295.9 mm)

Weight

Without Stand

With Stand

38.5 lbs (17.5 kg)

4.6 lbs (21.6 kg)

✎

Design and specifications are subject to change without prior notice.

✎

The actual appearance of the TV may differ from the images in this manual, depending on the model.

✎

This device is a Class B digital apparatus.

✎

For information about the power supply, and more about power consumption, refer to the label attached to the

product.

✎

Typical power consumption is measured according to Energy Star Program requirements for Televisions.

Dispose unwanted electronics through an approved recycler.

To find the nearest recycling location, go to our website:

www.samsung.com/recyclingdirect or call, (877) 278 - 0799

English - 20

[UH5005-ZA]BN68-06547D-00ENG.indb 20 2014-08-05  10:12:01

JACK PANEL DETAIL / REAR VIEW

1

6

2

3

4

5

(Unit: inches)

Model name

123456

UN58H5005 17.8 15.7 15.7 12.2 10.3 10.3

NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to

the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors.

© 2014 Samsung Electronics America, Inc

English - 21

[UH5005-ZA]BN68-06547D-00ENG.indb 21 2014-08-05  10:12:01

Supported Videos Formats

File Extention Container Video Codec Resolution Frame rate (fps) Bit rate (Mbps) Audio Codec

*.avi / *.mkv

*.asf / *.wmv

*.mp4 / *.3gp

*.vro / *.mpg

*.mpeg / *.ts

*.tp / *.trp

*.mov / *.flv

*.vob / *.svi

*.divx

AVI

MKV

ASF

MP4

3GP

MOV

FLV

VRO

VOB

PS

TS

DivX 3.11/4/5/6

1920 x 1080

6~30

30

AC3

LPCM

ADPCM

(IMA, MS)

AAC

HE-AAC

WMA

DD+

MPEG

(MP3)

DTS (Core)

G.711(A-Law, μ-Law)

MPEG4 SP/ASP

H.264 BP/MP/HP

Motion JPEG 640 x 480 8

Window Media Video v9

1920 x 1080 30

MPEG2

MPEG1

✎

Other Restrictions

• Video content will not play, or not play correctly, if there is an error in the content or the container.

• Sound or video may not work if the contents have a standard bit rate/frame rate above the compatible Frame/sec listed in

the table.

• If the Index Table contains an error, the Seek (Jump) function is not supported.

• Some USB/digital camera devices may not be compatible with the TV.

• The menu may display slowly if the video you are watching has a bit rate over 10Mbps.

Video decoder Audio decoder

• Supports up to H.264, Level 4.1 (FMO/ASO/RS are not

supported.)

• Frame rate :

- Below 1280 x 720: 60 frame max

- Above 1280 x 720: 30 frame max

• VC1 AP L4 is not supported.

• GMC 2 or higher is not supported.

• WMA 10 Pro supports up to 5.1 channel and M2 profile.

• WMA lossless audio is not supported.

• Vorbis supports up to 2ch.

• DD+ supports up to 5.1 channel.

Supported Subtitle Formats

• External

Name File extension

MPEG-4 timed text .ttxt

SAMI .smi

SubRip .srt

SubViewer .sub

Micro DVD .sub or .txt

SubStation Alpha .ssa

Advanced SubStation Alpha .ass

Powerdivx .psb

• Internal

Name Container Format

Xsub AVI Picture Format

SubStation Alpha MKV Text Format

Advanced SubStation Alpha MKV Text Format

SubRip MKV Text Format

MPEG-4 Timed text MP4 Text Format

Supported Photos Formats

File Extension Type Resolution

*.jpg

*.jpeg JPEG 15360 X 8640

*.bmp BMP 4096 X 4096

*.mpo MPO 15360 X 8640

✎

The MPO type file does not support Zoom,

Rotate and Slide Show Effect functions.

Supported Music Formats

File Extension Type Codec Remark

*.mp3 MPEG MPEG1 Audio Layer 3

*.m4a

*.mpa

*.aac

MPEG4 AAC

*.flac FLAC FLAC Supports up to 2ch.

*.ogg OGG Vorbis Supports up to 2ch.

*.wma WMA WMA

WMA 10 Pro supports up to 5.1 channel

and M2 profile. (WMA lossless audio is not

supported.)

*.wav wav wav

*.mid

*.midi midi midi type 0 and type 1

English - 22

[UH5005-ZA]BN68-06547D-00ENG.indb 22 2014-08-05  10:12:02

Important Warranty Information Regarding Television Format Viewing

✎

See the warranty card for more information on warranty terms.

Wide screen format PDP Displays (with 16:9 aspect ratios, the ratio of the screen width to height) are primarily designed

to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen

16:9 ratio format, or expanded to fill the screen if your model offers this feature, with the images constantly in motion.

Displaying stationary graphics and images on the screen, such as the dark sidebars on non-expanded standard format

television video and programming, should be limited to no more than 5% of the total television viewing per week.

Additionally, viewing other stationary images and text such as stock market crawls, video game displays, station

logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying

stationary images for more than 5% of total viewing time can cause uneven aging of your PDP display and leave subtle,

but permanent burned-in ghost images in the PDP picture. To avoid this, vary the programming and images, and

primarily display full screen moving images, not stationary patterns or dark bars. On PDP models that offer picture sizing

features, use these controls to view different formats as a full screen picture.

Be careful in the selection of television formats you use for viewing and the amount of time you view them. Uneven

PDP aging as a result of format selection and use, as well as burned in images, are not covered by your Samsung limited

warranty.

• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with

Samsung Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained

herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products

purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period

originally specified, and to the Original Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this

Statement, the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented

to the Service Center. Transportation to and from the Service Center is the responsibility of the purchaser. Conditions

covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal

use of the product.

Exclusions include, but are not limited to, any originally specified provisions for in-home or on-site services, minimum

or maximum repair times, exchanges or replacements, accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free:

‐ In the United States : 1-800-SAMSUNG (1-800-726-7864)

‐ In Canada : 1-800-SAMSUNG

Warranty Information

SAMSUNG BRAND PRODUCTS

LIMITED WARRANTY TO ORIGINAL PURCHASER

This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton

to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and

workmanship for the limited warranty period shown in the table below.

Categories Parts Labor Size Service

LCD/LED TV 1 Year 1 Year

40”and Larger Carry-In or In Home

37”and Smaller Carry-In

Plasma Display 1 Year 1 Year All Carry-In or In Home

Projector

(Excluding Lamp **) 2 Year 2 Year All Carry-In or Pick up

PICO & LED

Pocket Projector 1 Year 1 Year All Carry-In or Pick up

* 90 days parts and labor for commercial use.

** 180 Days after Purchasing and 600 Hours of Use Lamp on Projector.

English - 23

[UH5005-ZA]BN68-06547D-00ENG.indb 23 2014-08-05  10:12:02

This limited warranty begins on the original date of

purchase, and is valid only on products purchased and

used in the United States. To receive warranty service,

the purchaser must contact SAMSUNG for problem

determination and service procedures. Warranty service

can only be performed by a SAMSUNG authorized service

center. The original dated bill of sale must be presented

upon request as proof of purchase to SAMSUNG or

SAMSUNG's authorized service center.

SAMSUNG will repair or replace this product, at our

option and at no charge as stipulated herein, with new or

reconditioned parts or products if found to be defective

during the limited warranty period specified above.

All replaced parts and products become the property

of SAMSUNG and must be returned to SAMSUNG.

Replacement parts and products assume the remaining

original warranty, or ninety (90) days, whichever is longer.

Certain products are eligible for In-home service at

Samsung’s discretion. To receive in-home service, the

product must be unobstructed and accessible to service

personnel. If during in-home service, repair cannot not

be completed, it may be necessary to remove, repair

and return the product. If in-home service is unavailable,

SAMSUNG may elect, at our option, to provide for

transportation of our choice to and from a SAMSUNG

authorized service center. Otherwise, and for 37" and

smaller LCD/LED TV, transportation to and from the

SAMSUNG authorized service center is the responsibility

of the purchaser.

This limited warranty covers manufacturing defects in

materials and workmanship encountered in normal, and

except to the extent otherwise expressly provided for

in this statement, noncommercial use of this product,

and shall not apply to the following, including, but not

limited to: damage which occurs in shipment; delivery and

installation; applications and uses for which this product

was not intended; altered product or serial numbers;

cosmetic damage or exterior finishes; accidents, abuse,

neglect, fire, water, lightning or other acts of nature;

use of products, equipment, systems, utilities, services,

parts, supplies, accessories, applications, installations,

repairs, external wiring or connectors not supplied or

authorized by SAMSUNG which damage this product or

result in service problems; incorrect electrical line voltage,

fluctuations and surges; customer adjustments and failure

to follow operating instructions, cleaning, maintenance

and environmental instructions that are covered and

prescribed in the instruction book; reception problems

and distortion related to noise, echo, interference or other

signal transmission and delivery problems; brightness

related to normal aging, or burned-in images. SAMSUNG

does not warrant uninterrupted or error-free operation of

the product.

THERE ARE NO EXPRESS WARRANTIES OTHER THAN

THOSE

LISTED AND DESCRIBED ABOVE, AND NO WARRANTIES

WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT

NOT LIMITED TO, ANY IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE, SHALL APPLY AFTER THE EXPRESS

WARRANTY PERIODS STATED ABOVE, AND NO OTHER

EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY

PERSON, FIRM OR CORPORATION WITH RESPECT TO

THIS PRODUCT SHALL BE BINDING ON SAMSUNG.

SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE

OR PROFITS, FAILURE TO REALIZE SAVINGS OR OTHER

BENEFITS, OR ANY OTHER SPECIAL, INCIDENTAL

OR CONSEQUENTIAL DAMAGES CAUSED BY THE

USE, MISUSE OR INABILITY TO USE THIS PRODUCT,

REGARDLESS OF THE LEGAL THEORY ON WHICH THE

CLAIM IS BASED, AND EVEN IF SAMSUNG HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR

SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG

BE GREATER IN AMOUNT THAN THE PURCHASE

PRICE OF THE PRODUCT SOLD BY SAMSUNG AND

CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING

THE FOREGOING, PURCHASER ASSUMES ALL RISK

AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO

PURCHASER AND PURCHASER’S PROPERTY AND TO

OTHERS AND THEIR PROPERTY ARISING OUT OF THE

USE, MISUSE OR INABILITY TO USE THIS PRODUCT

SOLD BY SAMSUNG NOT CAUSED DIRECTLY BY THE

NEGLIGENCE OF SAMSUNG. THIS LIMITED WARRANTY

SHALL NOT EXTEND TO ANYONE OTHER THAN

THE ORIGINAL PURCHASER OF THIS PRODUCT, IS

NONTRANSFERABLE AND STATES YOUR EXCLUSIVE

REMEDY.

Some states do not allow limitations on how long an

implied warranty lasts, or the exclusion or limitation

of incidental or consequential damages, so the above

limitations or exclusions may not apply to you. This

warranty gives you specific legal rights, and you may also

have other rights which vary from state to state. To obtain

warranty service, please contact SAMSUNG at:

Samsung Electronics America, Inc.

85 Challenger Road

Ridgefield Park, NJ 07660-2112

1-800-SAMSUNG (7267864) – www.samsung.com

1-800-749-0260: Projectors only

English - 24

[UH5005-ZA]BN68-06547D-00ENG.indb 24 2014-08-05  10:12:02