Samzuk Technology Development Co DBIM10A Wireless Door Bell System -INDOOR User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3525689
Application ID	i5UqdgtSeTeiIYQPrlQxWg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	229.37kB (2867090 bits)
Date Submitted	2017-08-24 00:00:00
Date Available	2017-08-24 00:00:00
Creation Date	2017-04-14 20:05:51
Producing Software	Adobe PDF library 10.01
Document Lastmod	2017-08-01 15:59:53
Document Title	说明书-4-14（三祝W改）
Document Creator	Adobe Illustrator CS6 (Windows)

User Manual
Product Name: Wireless Door Bell
System -INDOOR
Model: DBIM10A,DBIM20A,
DBIM30A,DBIM40A,DBIM50A
Brand:
Manufacture :Guangdong Samzuk Technology Development Co,Ltd
Operation Manual
Wireless Door Bell System -INDOOR
Features
Model: DBIM10A
● 9 ring-tones available for your selection.
● Portable indoor unit that allows communication with the outdoor unit from any location.
● Built-in rechargeable battery that allows long-time operation without power supply.
● No need to press the button on the outdoor unit during the communication of the
indoor and outdoor units.
● One outdoor unit can be used with several indoor units.
● Chargeable indoor unit, Swappable battery for the indoor and outdoor units.
1. Getting familiar with the unit
MIC.
Speaker
Wall hanging hole
Ringtone selection key
Talking/Charging
Low Battery (In)
Battery box
CUT
DC power supply port
TALK
Receiving/Low Battery (Out)
Indoor Unit
Channel selection
ON/OFF swittch and volume
level button
1. Preparation before installation
1.1 Checking
Code matching is conducted by the factory before delivery. You can check them before installation
1) Turn on the rotation button of the indoor unit, and you can hear a "DI" sound if the battery is not empty.
2) The distance between the outdoor unit and indoor unit shall be greater than 2 meter.
3) Press door bell button of the outdoor unit. If a ring-tone can be heard from the indoor unit, and the
red-blue-green indication lights flash rapidly.
4) Press down the TALK button of the indoor unit and speaking, a voice will be heard from the outdoor unit.
just release the TALK button. Outdoor unit can speak without press any button from outdoor unit.
1.2 Adjust the Volume for outdoor unit
There are three levels of volume for the outdoor unit. The default setting is at the middle . Adjustment is
not necessary unless particular needs.
If necessary, please move the switch to the right or left
1.3 Charging
Important: The special lithium battery is imbedded in the unit., which is not fully charged due to transportation
and storage requirements.
Please charge the outdoor unit battery with the indoor unit before installation. full of electricity can let you
use for a long time.
1) The indoor unit will charge automatically when the power source is plugged in, and a red light will flash
during the charging process. The unit will automatically shut down when it is fully charged (meanwhile
the red light will stops blinking).
2) The batteries of indoor and outdoor units are swappable. The indoor unit battery can be removed to
outdoor unit at any time.
3) When outdoor unit battery capacity is insufficient, the Low Battery (Out) green light indicator of the
indoor unit will keep flashing until a fully charged battery is installed.
4) When the indoor unit battery level is low, the Low Battery (IN) blue light of the indoor unit will
keep flashing as a reminder to plug in the power source for charging.
Notes
1）Be sure to turn on the rotation button of indoor unit, otherwise the battery capacity and charging
status of all units cannot be monitored through the indicator light.
2) Better to connect the power supply always even if the indoor unit is not in use, so as to keep the
battery at a fully charged status and avoid doorbell malfunction due to power outrage.
2. Installation
Normally, the outdoor unit can be fixed at the outdoor doorbell location with screws. The indoor units can
be placed on the desks in different rooms or be shifted at the customer's convenience.
Installation Position Drawing of the Outdoor Unit
155.8
3. Instruction
3.1 Ring-tone selection
9 customized ring-tone are available in the system. Press the ring-tone selection button at the back
of the indoor unit to select.
3.2 TALK button function
1） When someone is pressing the doorbell, the indoor unit will ring, and the red, blue and green lights
will also flash (for 20 seconds) to alert the user. the person inside can keep press the TALK button
to communicate with the person outside. Release the TALK button after speaking, and the person
outside can talk back without the necessity of pressing any button.
2） Talking via the outdoor unit cannot exceed 30 seconds. For a talk more than 30 seconds, press the
TALK button of the indoor unit to extend talking duration (30 seconds for each press). During the
conversation, the person inside can press the TALK button of the indoor unit at any time to interrupt
the outdoor speaker. Each talk session initiated by the indoor person will give a 30-second talk time
for the person at the outdoor unit.
Remark:
If no one answers the indoor unit, the function of the indoor unit will be the same as that of a normal
door bell. That is, the bell will ring but the communication function will not be turned on.
3.3 CUT button function
1）Press the CUT button to immediately terminate the rings and talk session, this function can protect
indoor user from annoying doorbell rings or talking harassment.
2）Press the CUT button upon completion of the talk, this can save battery of the outdoor unit.
3.4 Code matching
The units are normally matched before delivery. If necessary, please perform the code matching according
to the following steps:
1) Turn off the indoor unit;
2) Press and hold the TALK button of the indoor unit, and turn on the rotation button at the same time.
When the Low Battery (In) blue light at the center of the indoor unit flashes rapidly, press the ring bell
of the outdoor unit. You can hear” Du” sound and blue light stops blinking, then you press the ring bell
of outdoor unit again, at this time, the red, blue and green lights will simultaneously flash for 20 seconds,
which shows that the matching is completed. Then, indoor and outdoor communication can be carried
out normally.
Note:
1) Make sure the battery of the indoor and outdoor units are charged before code matching.
2) Make sure the channel switch of the indoor units are at same position, A, B or C.
3.5 Added extra indoor unit to setup
1）If you want add extra indoor unit to setup you need take code matching with outdoor unit before use it .
Refer to Code matching process.
2) When one outdoor unit is matched with multiple indoor units, all indoor units will ring when someone
presses the outdoor ring bell button. When any one of these indoor units are connected, all the other
units stops ringing, and the person at the outdoor unit will be connected to that indoor unit. The
conversation will not be heard from other units. When all of indoor persons press TALK button all of
persons can talk with outdoor person.
3.6 Channel change
1) If noise occurs due to other interruptions, change channel by shifting the (A/B/C) channels on the indoor
unit.
2) One outdoor unit to one indoor unit: After the new channel is chosen, press the outdoor unit ring bell once,
and they will be shifted to the new channel automatically.
3) One outdoor unit to multiple indoor units : After the new channel is chosen, match every indoor unit with
the outdoor unit again to resume normal Operation.
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2017:04:14 20:05:51+08:00
Creator                         : Adobe Illustrator CS6 (Windows)
Modify Date                     : 2017:08:01 15:59:53+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Title                           : 说明书-4-14（三祝W改）
Metadata Date                   : 2017:08:01 15:59:53+08:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 212
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 16483 bytes, use -b option to extract)
Instance ID                     : uuid:c7afa293-5233-418a-9eba-87755c694ca8
Document ID                     : xmp.did:CEBB7BC2DC20E711ADB0F9C965EA8EA4
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:a801b2b5-774d-426d-9b95-72432dbda3f1
Derived From Document ID        : xmp.did:1FD93DC12C1FE711A287A9A6AEC14F93
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:9F73D93D20FEE61194D9EA9BC07360FE, xmp.iid:CEBB7BC2DC20E711ADB0F9C965EA8EA4
History When                    : 2017:03:01 20:16:45+08:00, 2017:04:14 20:05:47+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows)
History Changed                 : /, /
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 186.000016
Max Page Size H                 : 120.000255
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Arial-ItalicMT, Arial-BoldMT, FZHTK--GBK1-0, AdobeSongStd-Light
Font Family                     : Arial, Arial, Arial, 方正黑体_GBK, Adobe 宋体 Std
Font Face                       : Regular, Italic, Bold, Regular, L
Font Type                       : Open Type, Open Type, Open Type, TrueType, Open Type
Font Version                    : Version 5.20, Version 5.20, Version 5.20, 1.10, Version 5.017;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168
Font Composite                  : False, False, False, False, False
Font File Name                  : arial_0.ttf, ariali_0.ttf, arialbd_0.ttf, 方正黑体_GBK.TTF, AdobeSongStd-Light.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 明亮
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000002
Swatch Groups Colorants Magenta : 90.000004
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Adobe PDF library 10.01
Page Count                      : 9
For                             : Administrator,
Bounding Box                    : -207 -1565 1054 -25
Container Version               : 11
Creator Version                 : 16

EXIF Metadata provided by EXIF.tools