Sang Fei Consumer Communications CTX520 GSM/GPRS/EDGE 850/900/1800/1900 digital mobile phone with Bluetooth User Manual X520 Master EN

Shenzhen Sang Fei Consumer Communications Co., Ltd. GSM/GPRS/EDGE 850/900/1800/1900 digital mobile phone with Bluetooth X520 Master EN

Revised Manual

Download:
Mirror Download [FCC.gov]
Document ID	1026849
Application ID	/3WN+Frm9JItNdzoy55Hvw==
Document Description	Revised Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	243.8kB (3047480 bits)
Date Submitted	2008-11-06 00:00:00
Date Available	2008-11-06 00:00:00
Creation Date	2008-10-14 14:06:01
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2008-11-05 14:32:00
Document Title	X520_Master_EN.book
Document Creator	PScript5.dll Version 5.2
Document Author:	sf10257

X520_Master_EN.book
Page 0
Tuesday, October 14, 2008
Discover Your Phone
Back of phone:
Camera lens
262K colour
TFT LCD
Micro SD
card slot
Side volume
keys
Left softkey
Navigation
keys
Pick up key
Right softkey
Hang up and
on/off key
Headset,
charger, and
data cable
Alphanumeric
keypad
Microphone
AAA
battery cap
Philips continuously strives to improve its
products.Therefore, Philips reserves the rights to
revise this user guide or withdraw it at any time
without prior notice. Philips provides this user
guide “as is” and does not accept, except as
required by applicable law, liability for any error,
omission or discrepancy between this user guide
and the product described. The device is meant to
be connected to GSM/GPRS networks.
2:04 PM
How to ...
Switch the
phone On/Off
Long press and release ).
Enter your
PIN code
Enter your PIN code using the
keypad and press , to
confirm.
Lock/unlock
the keypad
Long press *.
Make a call
Enter the phone number using
the keypad and press (.
End a call
Press ).
Answer a call
When the phone rings, press (.
Activate/
deactivate
handsfree
mode
During a call, press RLoudsp.
to activate the handsfree
mode.
When there is an incoming
call, press LOptions, then select
Accept with handsfree and press
,.
Mute a call
When the phone rings, press
RSilent.
X520_Master_EN.book
Page 1
Tuesday, October 14, 2008
Reject a call
When the phone rings, press
).
Adjust
conversation
volume
Press volume side keys to adjust
the volume during a call.
Adjust ring
volume
When the phone is in idle
mode, press , > Settings >
Sounds > Ring volume to adjust
the ring volume of an incoming
call.
Access all
calls list
Press ( in idle mode.
Access Main
Menu
Press , in idle mode.
Go to
previous
menu
Press RBack when browsing
menu or in editing mode.
Quickly
return to idle
when
browsing
menus
Short press ).
2:04 PM
Softkeys
The left and right soft keys (L and R) are located
at the top of the keypad area. Pressing the soft keys
allows you to select the option displayed on the
screen directly above them, including options
during a call. The functions of the soft keys change
according to the current context.
Operations of the headset
The following operations are applicable to headsets
with only one key.
When you enter a phone number in idle mode,
short press the headset key to dial the number. To
stop dialing, long press the headset key.
During a call, short press the headset key to record
or stop recording; long press to hang up the phone.
When there is an incoming call, press the headset
key to answer the call; long press to reject the call.
Main Menu
You can access different features of your Xenium
X520 phone from the main menu. The following table
summarizes the structure of the main menu, what the
icons represent and the page number on which you
X520_Master_EN.book
Page 2
Tuesday, October 14, 2008
can obtain more information regarding the menu
functions.
Entertainment
Browser
Media player
page 20
page 21
page 24
Camera
Messages
My Favorites
2:04 PM
or press 0 - 9 keys, and * or # keys to access
the options and functions directly. You can also press
L to set the browse style as List or Grid.
When navigating through a list, the scrolling bar on
the right of the screen will indicate your current
position in the list. Press ,Select to access the
corresponding options of the selected item in the list.
Press RBack to return to the previous menu.
Menu without SIM
page 29
page 34
page 47
Business
Contacts
Profiles
If you do not have a SIM card, those menu items
whose functions that cannot work without a SIM
will be greyed out and not accessible.
Setting hot keys
page 51
page 57
page 60
Connectivity
Calls
Settings
page 62
page 65
page 69
Press , in idle mode to access the main menu and
press +, -, < or > to navigate through the icons and lists,
You can configure the +, -, <, >, L and R to access
your favorite features. Once they have been set,
you can simply long press the numeric key to access
the corresponding features.
Majority of the hotkeys have been preset and
configured. To check the hotkey settings, go to Settings
> General > Shortcuts > keypad. To change the hot
key settings, press the numeric key you wish to
change and press , Change, then select a feature to
X520_Master_EN.book
Page 3
Tuesday, October 14, 2008
2:04 PM
be associated with the numeric key from the
following list:
• Alarm
• Bluetooth
• Calculator
• Calendar
• View calls
• Camera
• Contacts
• Create message
• Firewall
• Flight mode
• Games
• Homepage
• Inbox
• Languages
• Menu
• Messages
• Meeting
• Music
• My Favorites
• Profiles
• Ringtones
• Shortcuts
• Tasks
• Unit converter
• Flash dial
• Voice recorder
• Secretary OTG
• Empty
Numeric keys 0, 1, # and * have been
preconfigured as the default keys to enter “+”,
access voice mailbox, activate Meeting profile
and unlock the keypad respectively, and cannot
be modified.
X520_Master_EN.book
Page 4
Tuesday, October 14, 2008
2:04 PM
Table of contents
1. Getting Started ........................................... 7
2.
Inserting the SIM card ..................................... 7
Charging the the phone .................................. 9
Using the AC power ....................................... 9
Using the backupowerTM .............................. 10
Recharging the AAA battery ........................ 11
Inserting a micro SD Card ........................... 11
Calling ............................................................. 13
Switch on the phone ..................................... 13
Switch off the phone ..................................... 13
Make a call ....................................................... 13
Options during a call ..................................... 14
Mute or unmute a call ................................... 14
Adjust speaker/earpiece volume ................ 14
Call recording ................................................. 14
End a call .......................................................... 14
Make an international call ............................ 14
Make an emergency call ................................ 15
Make a second call (Network dependent) ..... 15
Make a Conference Call (Network
dependent) ....................................................... 15
Switch calls (Network dependent) ............ 16
3.
4.
5.
6.
7.
Call Handsfree ................................................ 16
IP Dial (if available).......................................... 16
Answer a call ................................................... 16
Reject a call ..................................................... 16
Answer a second call (Network
dependent) ...................................................... 16
Contact Picture .............................................. 16
Text entry ................................................... 18
Select text entry methods ............................ 18
Enter text ........................................................ 18
Entertainment ........................................... 20
Games ............................................................... 20
JAVA ................................................................. 20
Browser ........................................................ 21
WAP ................................................................. 21
Push Inbox ....................................................... 23
Media Player ............................................... 24
FM radio ........................................................... 24
Music player .................................................... 25
Camera .......................................................... 29
Camera ............................................................. 29
X520_Master_EN.book
Page 5
Tuesday, October 14, 2008
Video recorder ............................................... 31
8. Messages ....................................................... 34
Create message .............................................. 34
Inbox ................................................................. 36
Sent ................................................................... 38
Outbox ............................................................. 39
Drafts ................................................................ 40
My favourites .................................................. 40
Spam box ......................................................... 41
SIM archive ...................................................... 41
Templates ........................................................ 42
Email .................................................................. 42
Advanced ......................................................... 44
Voice mail ........................................................ 45
Settings ............................................................. 45
9. My Favorites ............................................... 47
Pictures ............................................................. 47
Sounds .............................................................. 48
Videos ............................................................... 49
Others .............................................................. 50
Memory status ................................................ 50
10. Business ...................................................... 51
Calendar ........................................................... 51
Alarm ................................................................ 52
Calculator ........................................................ 52
Voice recorder ............................................... 53
2:04 PM
Secretary OTG ............................................... 53
Stopwatch ........................................................ 53
Countdown ..................................................... 54
Unit converter ................................................ 54
Firewall ............................................................. 54
Task.................................................................... 55
11. Contacts .................................................... 57
New contacts ................................................. 57
View contacts ................................................. 58
View groups .................................................... 58
Special numbers ............................................. 59
Advanced ......................................................... 59
12. Profiles ........................................................ 60
13. Connectivity ............................................ 62
Bluetooth ......................................................... 62
USB function ................................................... 63
Using PhilipsPhoneTools ............................... 63
14. Calls .............................................................. 65
View calls ......................................................... 65
Call options ..................................................... 65
Clear history ................................................... 68
15. Settings ....................................................... 69
Transfer backupower ................................... 69
General ............................................................ 69
Display .............................................................. 71
X520_Master_EN.book
Page 6
Tuesday, October 14, 2008
Sounds .............................................................. 72
Connectivity .................................................... 72
Icons & Symbols ............................................ 74
Precautions ....................................................... 76
Troubleshooting ............................................ 82
Philips Authentic Accessories .............. 84
Trademark Declaration ............................ 85
Specific Absorption Rate Information .... 86
Limited Warranty ........................................ 87
Declaration of conformity ...................... 90
2:04 PM
X520_Master_EN.book
Page 7
Tuesday, October 14, 2008
2:04 PM
1. Getting Started
Please read the safety instructions in the
"Precautions" section before use.
Before you start using your phone, you must insert
a valid SIM card supplied by your GSM operator or
retailer. The SIM card contains your subscription
information, your mobile telephone number, and a
small quantity of memory in which you can store
phone numbers and messages (for more
information, see "Contacts" on page 57).
Remove the battery
Lift the battery up from the bottom as shown
below.
Inserting the SIM card
Remove the back cover
Make sure that the phone is switched off. Hold the
phone with the front facing downwards and slide
the back cover upwards as shown below .
You may lose all your personal settings if you
remove the battery when the phone is switched
on.
Getting Started
X520_Master_EN.book
Page 8
Tuesday, October 14, 2008
2:04 PM
Insert the SIM card
Make sure that the clipped corner of the SIM card
is facing the correct direction and the metallic
contacts are facing downwards. Slide the SIM card
into the card slot until it stops. When you remove
your SIM card the first time, make sure that you
smoothen the edges, otherwise you may have
difficulty sliding in the card.
Replace the back cover
Slide the back cover down into its slot until it stops.
Replace the battery
With the metallic contacts facing upwards, press
the battery down into its slot until it locks into
place.
When inserting the battery, be careful not to
damage the metallic connectors of the SIM
card slot.
Getting Started
X520_Master_EN.book
Page 9
Tuesday, October 14, 2008
Charging the phone
Your phone is powered by a rechargeable main
battery and a smartcavityTM that supports the
backupowerTM technology. You can use the
backupowerTM feature to keep your phone running
when the AC charger is inconvenient.
Using the AC power
Once the main battery and battery cover are
installed, you can charge the phone. Plug in the
connector as shown below. Then plug the other
end into an AC power socket.
2:04 PM
takes more than 3 hours to fully charge the main
battery. Depending on the network and condition
of use, talk time and stand-by time can last up to 8
hours* and 1 month* respectively.
*Depending on the network conditions, user
settings, method of use, etc the actual results
may differ.
If you do not intend to use your phone for
several days, we recommend that you remove
the battery.
You can use the phone while it is charging. If
the battery is completely flat, the battery icon
will only reappear after a few minutes of
charging.
Using the backupowerTM
On the idle screen, the two battery symbols
indicate the state of charging，the left one for the
main battery and the right one for the AAA battery.
During charging, the left indicator will scroll and it
Getting Started
The backupowerTM technology accepts either a
standard AAA battery or a rechargeable AAA
battery.
One Energizer Lithium AAA battery can provide up
to 3 extra hours* of talk time or an extra 1 week*
of stand-by time, depending on the network and
conditions of use.
X520_Master_EN.book
Page 10
Tuesday, October 14, 2008
Use quality batteries to ensure that the battery
can be correctly detected by your phone. Your
phone is by-packed with an Energizer Lithium
AAA battery to provide you with maximum
power.
Insert an AAA battery
1. A key comes with the supplied phone strap.
Use the key to loosen the AAA battery cap on
the smartcavityTM.
2. Take off the battery cap by hand, put in the
battery and tighten the cap by hand again.
10
2:04 PM
Tighten the battery cap by hand. Stop
tightening the cap when it is secure (at the
groove).
When an AAA battery is inserted, the AAA
battery cap cannot be pushed inside
completely. There will be a protrusion at
around 5mm.
Remove the AAA battery if you will not use it
for power transfer for a long time.
Charge your phone using the AAA battery
1. Check that the AAA battery has sufficient
power (the right battery symbol is not in red).
2. Automatic charging:
• If the main battery is low, the AAA battery in the
smartcavity™ will charge the main battery
automatically. The message “Transferring” is
displayed.
Manual charging:
• Select Settings > Transfer backpower to start
charging.
• Select Stop transferring backpower to stop
charging.
When the main battery voltage reaches 4.0V, the
Getting Started
X520_Master_EN.book
Page 11
Tuesday, October 14, 2008
2:04 PM
AAA battery will automatically stop charging the
main battery.
batteries.
We recommend that you use
Energizer batteries.
No audible alert or message is given by your
phone if the backpower transfer happens at the
time that your phone is turned off.
Remove the non-rechargeable AAA battery
from your charger before you plug the charger
into the AC power socket.
Use the AAA battery in time of drained
main battery
If the main battery is drained and your phone
cannot be powered on, you can insert a full capacity
AAA battery into the smartcavityTM. It will
automatically charge the main battery and your
phone can be powered on again. The time needed
for charging depends on the remaining power of
the main battery. The lower the voltage, the longer
is takes to wake up the main battery.
Remove the rechargeable AAA battery from
your charger after it is fully charged.
Inserting a Micro-SD card
You can expand the memory of your phone by
adding a Micro-SD card.
1. Gently slip the card into the micro SD card
slot, with the
gold contacts facing
downwards.
Recharging the AAA battery
If you have put a rechargeable AAA battery in the
smartcavityTM, you can charge both the main
battery and AAA battery using the AC power
charger(see "Using the AC power" on page 9). If
any of the main battery or rechargeable AAA
battery is full, only the other one will be charged.
Your phone accepts Alkaline, Lithium and
rechargeable Nickel Metal Hydride (NiMH)
Getting Started
11
X520_Master_EN.book
Page 12
Tuesday, October 14, 2008
2:04 PM
2. Press the card until it is locked in place.
To remove the card, press the card to unlock it
first.
X520 can support up to 2GB micro SD card.
12
Getting Started
X520_Master_EN.book
Page 13
Tuesday, October 14, 2008
2. Calling
This chapter describes the features and options
related to making and receiving calls.
Switch on the phone
Long press ) to switch on the phone.
You may set a security code (PIN code) on your
phone to protect it from unauthorized use. If you
have set a security code, you will be prompted to
enter the corresponding security code when you
switched on the phone.
1. Enter the PIN code. If you have entered the
wrong number, press RClear to clear it.
2. Press ,. The phone will validate the PIN code
and commence network registration.
3. Once a network name is displayed on the
screen, you are ready to make or answer a call.
If there is no network name on the screen, you
need to re-register.
If you enter a wrong PIN code 3 times in
succession, your SIM card will be blocked. To
unblock it, you must request the PUK code from
your operator. If you enter a wrong PUK code
10 times in succession, your SIM card will be
permanently blocked and cannot be used
Calling
2:04 PM
anymore. If this happens, please contact your
network operator.
Switch off the phone
At all times, you can long press ) to switch off the
phone.
Make a call
You can make a call only when the network
name appears on the screen.
1. Enter the phone number.
2. Press ( to dial the number or press LOptions
to enter options menu, then select Dial.
Speed dial
On the idle screen, you can call a contact in your
phonebook by long pressing a numeric key. To
assign a speed dial key to a contact:
1. Go to Settings > General > Speed dial.
2. Select one of the locations (2 to 9).
3. Assign to the location a contact from your
phonebook.
13
X520_Master_EN.book
Page 14
Tuesday, October 14, 2008
Options during a call
During a call, you can press R to activate/cancel
Handsfree or press LOptions to carry out the
following operations:
- Put the call on Hold
- Mute/Unmute the call
- Record phone conversation (which includes 3
sub-options: Record both, Record the opposite
party and Record own)
- Make a New call
- End the current call
Mute or unmute a call
During a call, press LOptions and select Mute or
Unmute. If you select Mute, the microphone will be
deactivated.
When you switch from one call to another, muting
will be cancelled.
2:04 PM
When the volume has been set, the call volume will
take effect immediately and the settings will be
applied to your subsequent calls.
Call recording
During a call, press LOptions and select Record to
access the 3 recording options; namely, Record both
(default), Record the opposite party and Record own
(applicable to two-party calls or multi-party calls).
When you end the call, the recording will stop and
save automatically in AMR format under My files >
Sounds.
There is no limit to the length of the recording;
the recording will stop only when you press R
key to stop the recording, when there is
insufficient memory, or when the call has ended.
End a call
Adjust speaker/earpiece volume
Press ) to end a call.
During a call, call on hold or call waiting, you can
press + or - side key to increase or decrease the
volume (if you are not browsing the call options
menu).
Make an international call
14
1. Long press 0 until "+"appears on the screen.
2. Enter the country code.
3. Enter the area code (normally without the 0 in
front), followed by the phone number.
Calling
X520_Master_EN.book
Page 15
Tuesday, October 14, 2008
4. Press ( to call directly.
Make an emergency call
You can make an emergency call anytime,
irrespective of whether the mobile phone has been
registered on the network.
1. In idle mode, enter the emergency call number
(specific number in the caller's country)
2. Press (.
Note that an emergency call will not be stored
in the call record.
3. Alternatively, if there is no SIM card, pressing
RSOS can also bring you to the emergency call
screen. Then press ( or the OK softkey to
directly make an emergency call and the dial
animation will be displayed.
Make a second call (Network
dependent)
You can make a second call by putting the current
call on hold:
1. During a call with Party A, you can enter Party
B's number using the keypad.
Calling
2:04 PM
2. Press ( to dial Party B's number. Party A will
be put on hold automatically.
Make a Conference Call (Network
dependent)
Your phone supports multi-party call of up to five
members. The screen will display Conference call
during the multi-party call.
When there is a call waiting while you are already
on the phone, you can carry out the following
operations to establish the multi-party call:
1. Press ( to answer the second call. The first
call will be put on hold automatically.
2. Select Conference Call from the call menu. The
two calls will be combined and a conference
call is established.
During the multi-party call, you can answer a new
incoming call or add a new member to the call by
dialing the new member (the ongoing multi-party
call will be put on hold automatically). Once the call
is established, select Establish conference call from
the call menu to add the new member to the multiparty call (you can add up to five members).
If you wish to separate one member from the call,
you can select Split conference call during the multi-
15
X520_Master_EN.book
Page 16
Tuesday, October 14, 2008
party call. To disconnect a member from the call,
select End call in conference.
Switch calls (Network dependent)
When you have one active call and one call on hold,
you can press ,Swap to switch between the two
calls.
Call Handsfree
During a call, press RLoudsp..
IP Dial (if available)
You may select IP dial. When you select IP dial
option, the mobile phone will automatically add the
IP special service number preset by you in front of
the phone number and then make the IP dial. You
can also long press ( to activate the IP dial.
Answer a call
2:04 PM
Answer a second call (Network
dependent)
If you have activated Call waiting, you will be alerted
when there is a second incoming call. You can:
1. Press ( to answer the second call. The
current call will be put on hold automatically.
2. Press ) to reject the second call and continue
with your current call.
3. When there is one active call and one call on
hold, you can press ,Swap or LOptions to carry
out the following operations:
• Conference call
• Transfer call
• Loudsp.
• Mute
• Record
• End all calls
• End call
• View contact
• Menu
If you press the numeric keys, the notepad
editor will be opened under call waiting mode.
Press ( to answer a call.
Contact Picture
Reject a call
This feature allows you to link a contact in your
phonebook to a photo you have taken using the
camera function, or a picture you have downloaded
via WAP or data cable. During a call, if the other
Press ) to reject a call.
16
Calling
X520_Master_EN.book
Page 17
Tuesday, October 14, 2008
2:04 PM
party's name card is linked to a picture, the
incoming call background will display the
corresponding picture. This feature is referred to
as Contact picture.
Contact picture is only available on the phone
memory. The photo size should not be larger
than 176 x 220 pixels.
Calling
17
X520_Master_EN.book
Page 18
Tuesday, October 14, 2008
3. Text entry
Your mobile phone supports a number of text
entry modes, including T9 input, multi-tap input,
numeric input and symbol input.
Select text entry methods
During text editing, press # repeatedly to
select your desired inputs:
ENG/eng/Eng: for English entry
123: for numeric entry
: Pinyin input for Simplified Chinese
: Stroke input for Simplified/Traditional
Chinese
2. Long press * to switch the T9 English input
on or off.
3. To enter a symbol and punctuations, press
*.
The text editor remembers the last input method
you have used before you exit the editing screen.
When you access the editor again, it will
automatically select the last input method you have
used.
1.
Depending on the language you select for your
phone, the supported input methods may vary.
18
2:04 PM
Enter text
1.
2.
Select your desired text entry methods.
Enter text by using the alphanumeric keypad.
2 to 9 To input letters (T9 input)
Press repeatedly to input the desired
letter (multi-tap input)
1 to 6 To enter strokes (stroke input)
<,>
To browse candidate
words (T9 input/multi-tap input)
+, To browse the candidate words on the
previous/next page (T9 input/multi-tap
input)
,Select To confirm the selection
To input a space
RClear Short press to clear a letter,
long press to clear all entries.
If necessary, press RBack tto exit
the input mode first.
T9® input
T9 ® predictive text input is an
intelligent editing mode for messages,
which includes a comprehensive
Tegic Euro. Pat. dictionary. It allows you to quickly
App. 0842463
enter text. You need to press only
Text entry
X520_Master_EN.book
Page 19
Tuesday, October 14, 2008
once on the key corresponding to each letter
needed to spell a word: keystrokes input are
analyzed and the word suggested by T9 ® is
displayed at the pop-up window.
Examples: how to enter the word "home":
1. Press 4, 6, 6, 3. The screen displays
the first word of a list: Good.
2. Press - to scroll and select Home.
3. Press ,Select to confirm.
2:04 PM
character, press the keys corresponding to the
required strokes according to sequence to get the
desired character. The stroke input method in this
phone classifies a Chinese character into 5 basic
strokes: (horizontal, vertical, left falling stroke,
right falling stroke and over-down) as well as a
special stroke. When the stroke you need does not
correspond to the 5 basic strokes, replace it with
the special stroke.
Multi-tap input (ABC/Abc/abc)
Press the keys that are marked with the
corresponding letter you wish to enter. Press once
to get the first letter on the key, press twice quickly
to get the second letter and so on until the letter
you want is displayed on the screen.
Example: how to enter the word "home":
Press 4, 4 (GHI) 6, 6, 6 (MNO), 6
(MNO), 3, 3 (DEF). Press , when the message
is completed.
Stroke input
The principle of stroke input is to dissect and
separate every stroke of a Chinese character
according to sequence. When you wish to input the
Text entry
19
X520_Master_EN.book
Page 20
Tuesday, October 14, 2008
4. Entertainment
This section describes the games and additional
tools installed on your mobile phone.
2:04 PM
applications via WAP or USB and run them in the
Java environment.
When installing games via a USB data cable, make
sure that the application files are under the same
file folder as the .jar and .jad files.
Some of the features described here are
dependent on the configuration of your mobile
phone, the country in which you purchased
your mobile phone, and/or your service
provider.
Games
Default games
This menu features games that are pre-installed in
your mobile phone. Press , to enter the main
menu from idle mode and select Entertainment >
Games.
Java
Your mobile phone features a Java run-time
environment, which allows you to run Java
applications, such as games downloaded from the
network. You can also download games and other
20
Entertainment
X520_Master_EN.book
Page 21
Tuesday, October 14, 2008
5. Browser
Your phone comes with a WAP browser. You can
obtain news, sports and weather information, as
well as services from the internet via the WAP
browser.
This feature is available only if your
subscription includes WAP access services. The
settings have been pre-configured (depends on
country variants) and you do not need to
modify them. For more information, please
contact your network operator.
WAP
Normally, the phone would have been preconfigured. If you wish to add or modify the
configuration parameters, you need to obtain
the necessary information from your network
operator before you proceed. Philips is not
liable to give prior notification nor shall it bear
any consequences for any failures arising from
Browser
2:04 PM
changes of configuration made by you or by the
network operator. Please check with your
network operator for the most updated
information.
Homepage
Select this menu to access the homepage directly.
You can also set the homepage address in the
settings menu.
Bookmarks
You can save the current web page or the web
pages that you frequently visit to the Bookmarks list,
manage and organize them.
When you enter the menu, a list of bookmark
entries is displayed. To connect to the web address
of a particular bookmark entry, select an entry
using + or - and press ,.
If there are no existing entries, you can select the
following options to add and manage your
bookmarks:
Add
bookmark
Edit the title and web address.
21
X520_Master_EN.book
Page 22
Tuesday, October 14, 2008
History
To add a new bookmark:
Go to Bookmark menu
Press , to enter the
main menu from idle
mode
and
select
Browser > Bookmarks.
Select Add bookmark
Press ,.
Add a new bookmark
Enter the Address and
Title of the new
bookmark and press ,
Save.
To edit a bookmark:
Go to Bookmark menu
2:04 PM
This menu allows you to quickly access the last web
page you have visited.
1. When you enter this menu, the web pages you
have previously visited will be listed.
2. Select a web page on the list and press ,.
Then press LOptions to access the following:
Open
Info
Navigate
Exit
Go to
History
Press , to enter the
main menu from idle
mode
and
select
Browser > Bookmarks.
Save as
Send as SMS
Settings
Select a bookmark you
wish to edit
Press + or - and press
LOptions. Then select
Edit and press ,Select.
Edit the bookmark
Edit the Title and URL of
the bookmark and
press ,.
This menu allows you to configure the web settings
for web browsing. Your phone may have been preconfigured with the settings of a specific network
operator. If you are a subscriber of the network
operator, you may start using your WAP browser
immediately. Otherwise, you need to re-configure
the settings.
Enter the web address and press , to connect,
press RBack to return to previous web page.
Philips is not liable to give prior notification nor
shall it bear any consequences for failures
arising from changes in configuration made by
Enter address
22
Browser
X520_Master_EN.book
Page 23
Tuesday, October 14, 2008
2:04 PM
you or by the network operator, or changes in
WAP address or contents made by the internet
content provider. Please check with your
network operator and your internet content
provider for the most updated information.
The following options are available:
WAP profiles
Allows you to configure the WAP
profiles.
Clear cache
Allows you to set the Clear cache.
Clear history
Allows you to remove the web
history.
Options
Allows you to Show images, Exit info
or Enable cookies.
Push Inbox
Allows you to check your Push messages and
configure your Push settings, such as select whether
or not to accept Push messages, delete push
messages, etc.
Browser
23
X520_Master_EN.book
Page 24
Tuesday, October 14, 2008
6. Media player
FM radio
This menu allows you to listen to the radio on your
phone. Connect the headset connector to your
phone. There are 2 ways to tune to a station: Preset
stations and Auto preset.
2:04 PM
Keys operation
The keypad operations during radio broadcast are
as follows:
Key
Operation
Short press to start/stop
radio playback.
Exit the radio menu and
return to the idle mode.
< or >
Short press to select the
previous or next radio station
from the preset list.
Preset stations
You can use < or > for radio stations scan.
Auto preset
Press + will do a radio station scan. The search
will stop once a nearest station is found and the
screen will show the frequency where it stops.
When you select Auto preset, the channel will be
searched automatically. When the auto preset
is in process, all the keys are made unavailable
except ) and R.
24
Volume
keys
side
Adjust the volume. Once you
have set the volume, the
settings will be saved until the
next time you adjust it again.
LOptions
Open options menu.
RBack
Return to previous menu.
FM radio options menu
Saved as
preset
Save the current radio frequency to
selected presets.
Media player
X520_Master_EN.book
Page 25
Tuesday, October 14, 2008
Preset
stations
Show list of radio frequency
presets. When you highlight on a
preset station, you can select to
Play, Rename or Clear the selected
station.
Auto presets
Scan
the
radio
frequency
automatically and save it to the
preset channel list.
Off
Stop the radio.
Play in
background
Allows you to listen to the radio
station when you exit the radio
application.
RDS (dependent on the radio station
service)
The feature RDS (Radio Data System) is a
service that allows FM stations to send additional
information along with the regular FM radio
signal. When you are listening to an RDS station,
received text information rolls on the screen,
including station name, program type (for example,
News, Sports, and Info), and frequency. A pop-up
window appears when radio text messages are
received.
Media player
2:04 PM
Music player
This feature allows you to download music from
the network, save the audio files, edit your playlist,
and play music. The phone supports audio files in
MP3 and AAC format. However, only MP3 format
is supported with the bluetooth headset.
Tracks
This feature allows you to play downloaded music
in your Phone memory or Memory card (under
Sounds folder). From the listed tracks, use +/- to
select the music file you want to play and then press
,Open to open the music player to play the
selected track or press LOptions.
Options
Add
playlist
Description
to
Open the playlist, select a playlist
and add the selected track to the
playlist.
Delete track
Delete the selected track.
Details
View detailed information of the
selected track.
Playlists
The stored playlists are displayed on the screen. To
create a new playlist, select New playlist. Enter the
25
X520_Master_EN.book
Page 26
Tuesday, October 14, 2008
playlist name and press ,. Then use +/- to select a
playlist, press ,. Then press ,Edit and select the
tracks that you want to add to the playlist. Then
press ,Done to confirm and store the songs in the
playlist.
You can create up to 10 playlists. You can press
,Open to open the music player to play the
selected track or press LOptions.
Options
2:04 PM
the music player to play the selected track or press
LOptions.
Options
Description
Open
Open the music player to play the
selected track.
Add
playlist
to
Description
Open the playlist, select a playlist
and add the selected track to the
playlist.
Edit playlist
Edit the playlist.
Modify the playlist name.
Delete
track
Delete the selected track.
Rename
playlist
Delete the current playlist.
Delete
artist
Delete all tracks of the same artist.
Delete
playlist
Details
Tracks
sequence
Modify the play sequence of the
current playlist.
View detailed information of the
selected track.
Last played
Details
View detailed information of the
selected file.
List the last 10 tracks you have played, and the last
played track is displayed at the top of the list.
Artists
A list of singer names is displayed on the screen.
You can press +/- to select a certain artist and press
, to display all tracks of the selected artist.
From the listed tracks, use +/- to select the music
file you want to play. You can press ,Open to open
26
Settings
The available options include:
Options
Description
Media player
X520_Master_EN.book
Page 27
Tuesday, October 14, 2008
2:04 PM
Play in
background
Allows you to listen to the music
when you exit the music player
application. You can select Ask
first, Always or Never.
< or >
Short press to select the previous
song/next song. Long press to fast
rewind/fast forward the track
during playback.
Play mode
Select between Repeat one, Repeat
all, Shuffle and repeat, Shuffle or
Off.
+ or -
Help
Display descriptions on how to
use the music player.
Adjust volume. Once you have set
the volume, the settings will be
saved until the next time you
adjust it again.
LOptions
Open options menu.
RBack
Return to previous menu. When
you exit the music player, the
music playback will stop.
Refresh
lists
all
All tracks stored in the phone
memory and the memory card will
be refreshed.
Now playing
The screen displays the last played song. This
function enables you to go on playing the last
playlist you were listening to.
Keys operation
The keypad operations during music playback are
as follows:
Press LOptions to carry out the following
operations:
Play in
background
Allows you to listen to the music
when you exit the music player
application. You can select Ask
first, Always or Never.
Open the playlist, select a playlist
and add the selected track to the
playlist.
Key
Operation
Add
playlist
Short press to start/pause/resume
the music playback.
Play mode
Media player
to
Select between Repeat one, Repeat
all, Shuffle and repeat, Shuffle or Off.
27
X520_Master_EN.book
Page 28
Tuesday, October 14, 2008
Off
Turn off the music player.
Details
View detailed information of the
selected track.
28
2:04 PM
Media player
X520_Master_EN.book
Page 29
Tuesday, October 14, 2008
7. Camera
2:04 PM
Zoom in/out
Press +/-.
Only available for picture
resolution of 640*480 or
below.
Camera
Your mobile phone features a 2.0 mega pixel digital
camera that allows you to take pictures and record
videos, store them in your phone and memory
card, use them as wallpaper or send them to your
friends.
Adjust
brightness
Take a picture
Consult the table below on how to carry out some
common operations with your camera.
How to ...
Launch Camera
Camera
Press , to enter the main
menu from the idle mode and
select Camera. Then switch to
the camera mode.
Brightness level is -3 to +3.
Default level is 0.
Press ,.
The
picture
will
be
automatically saved and
stored in My Favorites >
Pictures.
Please ensure that the camera lens is clean
before you take pictures, as small dust particles
can strongly affect the picture quality.
Camera mode
Press +/- side keys.
Exit from
Camera and
return to the idle
mode
Press ) key or RBack twice.
At any point in time, you can press ) key to
cancel the current operation and return to the
idle mode.
29
X520_Master_EN.book
Page 30
Tuesday, October 14, 2008
Camera option menu
When the camera mode is activated and before a
picture is taken, you can change a number of
settings by pressing LOptions.
2:04 PM
Camera
Mode
Color effects: Off (default), B&W,
Sepia, Blue or Red.
The selected color effect will be
displayed on the screen in real
time.
Options
Description
Picture
resolution
Select image size: 1600*1200,
1280*1024, 1024*768, 640*480
and 176*220.
Picture
quality
Select image quality: Superfine, Fine
and Normal.
The time limit is 8 seconds.
The last selected value will
remain active until you change it
again.
Three pictures can be taken at
the same time.
View
picture
Enter My Favorites > Pictures to view
the pictures taken.
Night mode: On or Off
Self-timer: On or Off
Multishot: On or Off
Advanced
Storage location: My files or Memory
card
Default name: modify the default
name of the photo.
Frequency: 50Hz or 60Hz
Full screen preview: On or Off
Photo preview option menu
Once you have activated the camera, simply press
, to take a picture. The picture is automatically
saved and displayed on the screen. You can press ,
30
Camera
X520_Master_EN.book
Page 31
Tuesday, October 14, 2008
to Send the picture via Bluetooth or via MMS, or
LOptions to carry out the following operations:
Options
Description
Delete
Delete the current picture.
Rename
Change the name of the picture.
Capture
Return to the viewfinder screen to
take a new picture.
Set as
contact
picture
Link the picture to a contact in your
mobile phone so that the picture will
be displayed when the contact calls
you.
Available for picture resolution of
176*220 only.
Set as
wallpaper
Set the picture as a wallpaper in idle
screen.
Details
View detailed information of the
picture.
When there is not enough memory space, you
will not be able to save the picture and you will
be prompted with a warning message. You have
to delete existing pictures before you can store
new ones.
Camera
2:04 PM
Video recorder
This option allows you to record short videos.
You can play the video, store it in your phone or
in the memory card. You can also send the video
to your friends via MMS or Bluetooth.
How to ...
Launch Video
recorder
Adjust
brightness
Record a
video
Press , to enter the main menu
in idle mode and select Camera.
Then, press < or > to switch to
the video mode.
Press +/- side keys.
Brightness level is -3 to +3.
Default level is 0.
Press , key once. Press again to
stop recording.
The video will be automatically
saved and stored in My Favorites >
Videos.
Exit from
Video mode
and return to
idle mode
Press ) key or RBack twice.
31
X520_Master_EN.book
Page 32
Tuesday, October 14, 2008
Video option menu
When the video mode is activated and before you
start recording, you can change a number of
settings by pressing LOptions.
2:04 PM
Options
Description
Storage location: My files or
Memory card.
Default name: modify the default
name of the video
Mute: On or Off
Video quality
Select video quality: Fine or
Normal.
If you select On, sound will not
be recorded.
The last selected value will
remain active until you change
it again.
Video length: MMS (default) or
Unlimited.
View
video
Enter My Favorites > Videos to
view the recorded videos.
Video mode
Color effect: Off (default), B&W,
Sepia, Blue, or Red
The selected color effect will
be displayed on the screen.
Video format: MPEG-4 or H263
Frames per second: 5, 10 or 15
frame per second.
32
Advanced
If you select MMS, the size of
the recorded video will be
smaller than the currently
specified maximum MMS size.
Recording will stop when
reaching the maximum MMS
size and the video will be
stored automatically. If you
select Unlimited, there will be no
restrictions on the size of the
recorded video. The maximum
size shall be determined by the
memory capacity of your
mobile phone or the memory
card.
Camera
X520_Master_EN.book
Page 33
Tuesday, October 14, 2008
2:04 PM
Video Playback
Once you have activated the video mode, simply
press , to start recording. Press again to stop
recording. The video is automatically saved and the
last recorded scene is displayed on the screen. You
can press ,Play/Pause to play the recorded video
or pause the playback, or press LOptions to carry
out the following operations:
Options
Description
Send
Send the recorded video:
Via Bluetooth and Via MMS.
Delete
Delete the recorded video.
Record new
Return to video mode to record a
new video clip.
Details
View detailed information of the
recorded video.
When there is not enough memory space, you
will not be able to save the recorded video and
you will be prompted wtih a warning message.
Camera
33
X520_Master_EN.book
Page 34
Tuesday, October 14, 2008
8. Messages
3.
2:04 PM
Enter the SMS content in the SMS editor and
press LOptions to carry out the following
operations:
Clear text
Delete the text on the editing
screen.
Save
Save as draft: save the SMS as draft.
Save as template: save the SMS as
template.
Insert contact
Insert the contact from the
phonebook list.
Use template
Insert a preset message.
Exit editor
Exit from the SMS editor.
Spell word
Select Chinese
method.
Create, edit and send SMS
Help
Displays the shortcuts for editing.
You need to enter the correct message centre
number before you can send SMS. The number
can be obtained from your network operator.
If your SMS is not sent successfully, you can
resend it. If your SMS cannot be sent
successfully after several attempts, please
check if your SMS center number has been set
correctly.
Create message
SMS
SMS enables you to send text messages to the
other party, which is a convenient and affordable
mode of communication. You can use the SMS
menu to send messages to another handphone or a
device that is capable of receiving SMS.
Your phone can store up to 1000 messages. Once
you have reached 1000 messages, the screen will
flash an icon to alert you. You need to delete some
messages in order to receive new ones.
1.
2.
34
In idle mode, press , to enter the main menu.
Select Messages > Create Message > SMS and
press ,. The SMS editing screen will appear.
pinyin
input
When editing SMS, for certain reasons (such as
an incoming call, out of battery), you are forced
Messages
X520_Master_EN.book
Page 35
Tuesday, October 14, 2008
to exit from the SMS editing screen before you
managed to send or save your message
successfully, the edited message will be saved
automatically. The next time you enter the
SMS editor, the message will be displayed on
the screen.
MMS (network dependent)
Your phone allows you to send and receive
multimedia messages, known as MMS, which
features texts, pictures, sound and video clips. MMS
can comprise one or several slides. Whether you
send it to an e-mail address or to another mobile
phone, the MMS will be played as a slide show.
Your phone can support 50 MMS (maximum
100KB). When the maximum of 50 MMS is
reached, the screen will display a MMS icon to alert
you. You will need to delete some old MMS in
order to receive new ones.
Before you can send MMS, you need to enter
the correct MMS Center number and ensure
that the network profile of your MMS has been
correctly configured. You can obtain such
information from your network operator.
Messages
2:04 PM
Create, edit and send MMS
1.
2.
3.
In idle mode, press , to enter the main menu.
Select Messages > Create Message > MMS and
press ,. The MMS editing screen will appear.
Enter the MMS content in the MMS editor and
press ,. Then press LOptions to carry out the
following operations:
Insert object
Insert picture, video, melody, page
or object.
Only a picture, a melody and a
video can be inserted on one
page. If 3 of them exist at the
same time, only one can be saved.
Edit subject
Edit the subject of the MMS.
Preview
Preview the current MMS.
Page timing
Set play time of the MMS slides. The
default value is 30 seconds.
Save
Save as draft: save the MMS as draft.
Save as template: save the MMS as
template.
Exit editor
Exit from the MMS editor.
35
X520_Master_EN.book
Page 36
Tuesday, October 14, 2008
Spell word
Select Chinese pinyin input method.
Help
Displays the shortcuts for editing.
When there is more than one page, you can press to view the different pages of the MMS. At the
same time, the title bar at the top of the screen will
display the current page you are viewing and the
total number of pages in your MMS.
4. Press ,Send to access the next option menu:
Contacts
Select the contact from the Contacts
list.
Groups
Select the group from the Groups
list.
Phone
number
Enter the phone number of the
recipient.
Recently list
Select from the list of recipients you
received the messages from.
Email
address
Enter the e-mail address of the
recipient.
3.
4.
2:04 PM
If there are messages in the Inbox, they will be
listed on the screen in the order they were
received (the most recent message will appear
at the top of the list).
Press +/- to select a message. When a message
is selected, its contents will be displayed on the
screen. Press ,View to view the selected
messages or press LOptions to carry out the
following operations:
Reply
The sender's number will be used as
the
destination
number
automatically and the message
editor will be activated. Enter your
reply and send the message.
Forward
When you select Forward, the
contents of the selected message
will appear in the message editor.
You may edit the message before
sending.
Delete
Delete the message from the
Inbox.
Inbox
The Inbox stores the messages you have received.
1. In idle mode, press , to enter the main menu.
2. Select Messages > Inbox and press ,.
36
Messages
X520_Master_EN.book
Page 37
Tuesday, October 14, 2008
Add to
blacklist
When you add the contact to the
blacklist, you will not receive call/
message from this contact
anymore.
Archive to SIM
Copy the selected message to SIM
archive.
Move to my
favourites
Move the selected message to My
favourites.
Details
View information of the message
such as date, time and sender.
Dial
Extract the sender's number from
the message and dial the number.
Smart search
Search the messages by sender's
name, number or time.
Select multiple
You can choose to Select one by
one or Select all. You can
press , to Select/Undone the
operations on multiple messages.
Checkboxes will be marked on the
left of the selected message. Press
LOptions to delete the selected
messages, or you can move them
to My favourites.
Messages
2:04 PM
5.
Press , to enter the next screen whereby the
message details will be displayed. Press ,Reply
the message by SMS or MMS or press
LOptions to carry out the following
operations:
Forward
Delete
Extract
numbers
Add to
blacklist
When you select Forward, the
contents of the selected message
will appear in the message editor.
You may edit the message before
sending.
Delete the message from the
Inbox.
Opens the list of numbers
available in the message. In this list,
the L option opens a pop-up
window showing the following
options:
• Save
• Update existing
• Dial
• Send message
When you add the contact to the
blacklist, you will not receive call/
message from this contact
anymore.
37
X520_Master_EN.book
Archive to SIM
Move to my
favourites
Move to spam
box
Details
Dial
Page 38
Tuesday, October 14, 2008
Copy the selected message to SIM
archive.
Move the selected message to My
favourites.
Move the selected message to
spam box.
View information of the message
such as date, time and sender.
Extract the sender's number from
the message and dial the number.
Sent
The Sent box allows you to save the messages you
have sent successfully.
1. In idle mode, press , to enter the main menu.
2. Select Messages > Sent and press ,.
3. If there are messages in the Sent box, they will
be listed on the screen.
4. Press +/- to select a message. When a message is
selected, its contents will be displayed on the
screen. Press ,View to view the selected
38
2:04 PM
mesage, or press LOptions to carry out the
following operations:
Resend
Resend the selected message.
Forward
When you select Forward, the
contents of the selected message will
appear on the message editor. You
may edit the message before
sending.
Delete
Delete the message from Sent .
Archive to
SIM
Copy the selected message to SIM
archive.
Move to my
favourites
Move the selected message to My
Favourites.
Details
View information of the message
such as date and time.
Select
multiple
You can select several messages one
by one or all at once. You can press
, to select/cancel the operations on
multiple messages. Checkboxes will
be marked on the left of the selected
message. Press LOptions to delete
the selected messages, or you can
move them to My favourites.
Messages
X520_Master_EN.book
Page 39
Tuesday, October 14, 2008
Press , to enter the next screen whereby the
message details will be displayed. Press
,Resend to resend the selected mesage, or
press LOptions to carry out the following
operations:
Forward
When you select Forward, the
contents of the selected message will
appear on the message editor. You
may edit the message before sending.
5.
2:04 PM
4.
Press +/- to select a message. When a message is
selected, its contents will be displayed on the
screen. Press ,View to view the selected
message, or press LOptions to carry out the
following operations:
Resend
Resend the selected message.
Forward
When you select Forward, the
contents of the selected message will
appear on the message editor. You
may edit the message before
sending.
Delete
Delete the message from the Outbox.
Archive to
SIM
Copy the selected message to SIM
archive.
Delete
Delete the message from Sent.
Move to my
favourites
Move the selected message to My
favourites.
Move to my
favourites
Move the selected message to My
favourites.
Details
View information of the message
such as date and time.
Details
View information of the message
such as date and time.
Select
multiple
You can select several messages one
by one or all at once. You can press
, to select/cancel the operations on
multiple messages. Checkboxes will
be marked on the left of the selected
message. Press LOptions to delete
the selected messages, or you can
move them to My favourites.
Outbox
The Outbox allows you to save the messages you
have not sent successfully.
1. In idle mode, press , to enter the main menu.
2. Select Messages > Outbox and press ,.
3. If there are messages in the Outbox, they will be
listed on the screen.
Messages
39
X520_Master_EN.book
Page 40
Tuesday, October 14, 2008
Press , to enter the next screen whereby the
message details will be displayed. Press
,Forward to edit the selected message or press
LOptions to carry out the following operations.
Resend
Resend the selected message.
5.
Delete
Delete the message from the Outbox.
Move to my
favourites
Move the selected message to My
favourites.
Details
View information of the message
such as date and time.
Drafts
List the messages that were created and saved but
were not sent, and messages that were
automatically saved before you were able to save
or send them when you exit from the message
editor.
Select a message from the Drafts box and press
,View, or press LOptions to: Send, Edit, Delete, view
Details or Select multiple. If you press ,View, the
subsequent procedures would be similar to the
Inbox operations.
40
2:04 PM
My favourites
This menu contains all the messages received and
saved in the phone memory via Move to my favourites
option.
1. In idle mode, press , to enter the main menu.
2. Select Messages > My favourites and press ,.
3. If there are messages in My favourites, they will
be listed on the screen.
4. Press +/- to select a message. When a message
is selected, its content will be displayed on the
screen. Press ,View to view the selected
messages or press LOptions to carry out the
following operations:
Details
View information of the message
such as date, time and sender.
Reply
The sender's number will be used as
the destination number automatically
and the message editor will be
activated. Enter your reply and send
the message.
Forward
When you select Forward, the
contents of the selected message will
appear in the message editor. You
may edit the message before sending.
Messages
X520_Master_EN.book
Page 41
Tuesday, October 14, 2008
Delete
Delete the
Favourites.
message
from
My
Restore
location
Move the message to the original
location where the message is sent or
received.
Dial
Extract the sender's number from
the message and dial the number.
Select
multiple
You can select several messages one
by one or all at once. You can press
, to select/cancel the operations on
multiple messages. Checkboxes will
be marked on the left of the selected
message. Press LOptions to delete
the selected messages.
5. Press , to enter the next screen whereby the
details will be displayed. Press LOptions to
carry out the following operations:
Details
View information of the message
such as date, time and sender.
Reply
Messages
The sender's number will be used as
the destination number automatically
and the message editor will be
activated. Enter your reply and send
the message.
2:04 PM
Forward
When you select Forward, the
contents of the selected message will
appear in the message editor. You
may edit the message before sending.
Delete
Delete the
Favourites.
Restore
location
Move the message to the original
location where the message is sent or
received.
Dial
Extract the sender's number from
the message and dial the number.
message
from
My
Spam box
This menu allows you to filter messages after the
firewall has been set. When the firewall is activated,
any message from a person on your blacklist will go
to the spam SMS box automatically.
SIM archive
In the menu, you can see the read and unread
messages saved in the SIM Card. Press ,View to
41
X520_Master_EN.book
Page 42
Tuesday, October 14, 2008
view the selected messages or press LOptions to
carry out the following operations:
Options
Description
Reply
Reply the message.
Forward
Forward the message to other
recipients.
Delete
Delete the message.
Add to
blacklist
When you add the contact to the
blacklist, you will not receive call/
message from this contact anymore.
Move to my
favourites
Move the selected message to My
favourites.
Details
View information of the message,
such as date, time and sender, etc.
Dial
Call the sender of the message.
Select
multiple
You can press , to select/cancel the
operations on multiple messages.
Checkboxes will be marked on the
left of the selected message. You
can delete the selected messages.
42
2:04 PM
Templates
This menu allows you to select a message saved as
a SMS or MMS template. You can create, send,
modify and delete your preset messages.
Email
Your phone can send and receive e-mail messages,
provided this service is included in your
subscription. You must already have an e-mail
account and have received the settings from your
e-mail service provider. In some cases, your mobile
phone service provider may also provide an e-mail
service.
Create e-mail
To write an e-mail, select Email > Create. Enter the
address (To), a copy (Cc), or blind copy (Bcc), Subject
and the e-mail Content. When you have finished
writing your e-mail, press L to access the
following:
Save
Save the message in the draft box
without sending it.
Send
Send the e-mail.
Messages
X520_Master_EN.book
Page 43
Tuesday, October 14, 2008
Inbox
This menu allows you to connect to your mailbox
and download the e-mail headers. Press L to
Receive the e-mails. You may then select an e-mail
header and press L to access the following
options: View, Delete, Reply, Reply all, Forward, Delete
all, Receive.
Drafts
The menu lists all the e-mails you have saved but
not sent. Press L to: Edit, View, Delete, Delete all.
Outbox
The menu lists all the e-mails you have sent. Press
L to: Edit, View, Delete, Delete all.
Check mail
The menu allows you to connect to your mailbox
and to download the e-mails. This might bring up a
message requesting airtime. Select Yes to continue
and receive new e-mails.
Settings
This menu allows you to edit e-mail's Account
Settings or Activate one of the available profiles by
pressing L. Use +/- key to access the menu list,
press , or numeric keypad to edit the content. In
the editing screen, press , to return, press L to
Messages
2:04 PM
Save and R to Clear. You may edit the following
details:
Menu
Description
Profile name
To name the profile.
E-mail address To enter an e-mail address.
User ID
To enter a login name.
Password
To enter the password.
Number of
mails received
at a time
To define the number of mails
received at a time.
Incoming
server
To set the POP information used
to receive e-mails.
Outgoing
server
To set the SMTP information used
to send e-mails.
SMTP
authentication
To turn on/off the authentication.
Type
To select POP3 or IMAP.
Exit
You will be exited from the e-mail menu.
43
X520_Master_EN.book
Page 44
Tuesday, October 14, 2008
Advanced
Cell Info
This is a network service which allows you to
receive text messages of various contents, such as
news, traffic, etc. These messages are provided by
the network to the subscribers within a certain
network area. If this service is available, the
network will provide you with the broadcast
channel numbers. It gives you access to the options
listed below.
Options
Description
Reception
Select to turn on/off the reception of
new cell broadcast messages.
Topics
Add, change or delete channels.
: Press ,Add to add a new
channel.
Change: Edit a channel number.
Delete: Delete a channel in the channel
list.
2:04 PM
SMS timer
You may set a specific time to send an edited text
message to a particular contact.
This menu allows you to select Add to send text
messages at specific times and display such
messages in a list on the screen.
Select Add to enter into the SMS editing screen.
Press , to open the contacts list and select a
contact, or enter the phone number directly and
set message sending options. You can set the date
and time to send the message.
When you select a message from the list of text
messages configured for sending at specific times,
you can press ,View to view the details of the
message or press LOptions to carry out the
following operations:
Delete
Delete the message.
Delete all
Delete all messages.
When you enter a message detail screen, you can
press ,Send to send the message to the recipient
Memory status
This feature allows you to see how much memory
space remains for messages in your phone and SIM
card.
44
Messages
X520_Master_EN.book
Page 45
Tuesday, October 14, 2008
2:04 PM
directly or press LOption to carry out the
following operations:
•
Edit
You can edit the contents, contact
or date.
Settings
Delete
Delete the message.
SMS
Voice mail
This menu allows you to set your voice mailbox
number and listen to voice messages your
correspondents have left for you.
You can forward your calls to your voice
mailbox (the phone number for callers to leave
a message) via the Call forwarding feature.
Call voice mail
When you receive a voice mail, the phone will send
you an alert. You can then call your voice mailbox
number to retrieve your voice mail.
In idle mode, long press 1 to call your voice
mailbox directly. If the number is empty, you will be
prompted to enter the number.
Voice mail number
Generally, you can obtain two sets of numbers
from your network provider:
• number for the caller to leave a message (this
number can also used for call forwarding)
Messages
number for you to retrieve your voice
messages
Select Messages > Settings > SMS to open the list of
SMS accounts. Press LReset to edit the SMS
settings:
Service center number
This menu allows you to save and edit the SMS
service center number of your home network. If
the service center number is empty, you will not be
able to send any SMS.
Validity period
Allows you to select the duration by which your
messages will be stored in the service center. You
can select from: 1 hour, 12 hours, 1 day, 1 week and
Maximum (default). Press +/- to select a value.
This option is useful when your recipient is not
connected to the network and is not able to
receive your messages immediately.
This feature is subscription dependent.
Delivery report
You can select , to set this option On or Off. This
option allows you to set whether or not to notify
45
X520_Master_EN.book
Page 46
Tuesday, October 14, 2008
you the send status of your messages: successfully
sent to the recipient, or not sent successfully.
This feature is subscription dependent.
Signature
You can select , to set this option On or Off
(Default is Off). If set to On, it opens an editor
where you can enter your signature. The signature
will be added to the end of your message before it
is sent to your recipient.
If the SMS is too long after adding the
signature, the signature will be ignored.
Storage location
You can press ,Change to change the preferred
storage location of your messages: SIM card
(Default) or Mobile phone.
Send and Save
You can select , to set this option On or Off. This
option allows you to set whether or not to save the
sent messages.
MMS
This menu allows you to set your MMS center and
personalize your MMS settings. The options
include:
46
2:04 PM
Profiles
You can select or edit the parameters.
Sender visibility
You can press ,Change to set this option On or off.
It is used to set if your identity will be visible when
MMS is sent.
Priority
This option allows you to set the priority level of
your MMS. You can set Low, Normal (default) or High.
Delivery report
You can press ,Change to set this option On or off.
When it is set to On, a report will be sent to notify
you if the MMS has been delivered to the recipient.
Read report
You can press ,Change to set this option On or off.
When it is set to On, a report will be sent to notify
you if the MMS has been read by the recipient.
Expiry time
Allows you to select the duration by which your
MMS will be stored in the MMS center. You can
choose from 6 hours, 12 hours, 1 day, 1 week or
Maximum (default).
Retrieval
Allows you to select Automatic, Deferred, Auto in
home network when downloading MMS messages.
Messages
X520_Master_EN.book
Page 47
Tuesday, October 14, 2008
9. My Favorites
This menu allows you to store the files in different
folders (Pictures, Sounds, Videos, Others) to facilitate
more efficient management of files in your phone
and the memory card. In addition, you can obtain
information regarding your phone and memory card,
such as the availability of free memory, memory
utilized and total memory size via the Memory status
option.
Pictures
When you enter this menu, the photos which you
have taken using the phone's camera as well as
pictures you have downloaded via MMS, WAP, BT,
or USB will be displayed in a list.
1. Select My Favorites > Pictures and press , to
enter the menu.
2. Press ,View/Open to view the selected picture/
open the selected folder or press LOptions to
My Favorites
2:04 PM
carry out the following operations to a
selected file:
Options
Description
Send
Send the selected file: Via bluetooth or
Via MMS.
Advanced
Cut: Similar to copy, but the original
file will be deleted.
Copy: Copy the selected file to
another folder.
Rename
Modify the name of the selected file.
Details
Display detailed information of the
selected photo, such as last
modification time, file size, etc.
Use
As contact ID: If you select this option,
the phonebook list will be displayed.
After you have selected a contact
from the phonebook, press LSelect
to associate the picture to the
selected contact.
Only available for picture of
176*220 or smaller.
47
X520_Master_EN.book
Page 48
Tuesday, October 14, 2008
2:04 PM
As wallpaper: If the selected photo is
176*220 or smaller, it will be
displayed as wallpaper in its original
size.
3. The folder options include:
Rename
Modify the name of the selected
folder.
Delete
Delete the selected picture.
Details
Slide show
If you select this option, the screen
will display the full screen view of all
the pictures in the form of
slideshow every 4 seconds. Press
any key to exit from the slide show
mode.
Display detailed information of the
selected folder.
Delete
Delete the selected folder.
Change view
Select List view or Grid view.
Sort
Sort the pictures and folders by
name or date.
Change view
You can select to view the pictures
in List view, Grid view or Full screen.
Sounds
Sort
Sort the pictures and folders by
name or date.
Select
multiple
Select one by one: select the picture
one by one and then Cut, Copy or
Delete them.
Select all: select all the pictures and
then Cut, Copy or Delete them.
When you enter this menu, the sounds which you
have stored or downloaded via MMS, WAP, BT, or
USB will be displayed in a list.
1. Select My Favorites > Sounds and press , to enter
the menu.
2. Press ,Play/Open to play the selected audio file/
open the selected folder or press LOptions to
carry out the following operations to a
selected file:
48
My Favorites
X520_Master_EN.book
Page 49
Tuesday, October 14, 2008
2:04 PM
Send
The available options are: Via
bluetooth and Via MMS.
3. The folder options and their operations are the
same as Pictures menu.
Advanced
Cut: Similar to copy, but the original
file will be deleted.
Copy: Copy the selected file to
another folder
Videos
Use
You can set the audio file: as
ringtone or as contact ID.
Rename
Modify the name of the selected
file.
Details
Display detailed information of the
selected audio file, such as last
modification time, file size, etc.
Delete
Delete the selected audio file.
Change view
Select List view or Grid view.
Sort
Select multiple
My Favorites
When you enter this menu, the videos which you
have recorded using the phone's camera as well as
videos you have downloaded via MMS, WAP, BT,
or USB will be displayed as a list.
1. Select My Favorites > Videos and press , to enter
the menu.
2. Press ,Play/Open to play the selected video/
open the selected folder or press LOptions to
carry out the following operations to a
selected file:
Options
Description
Send
Send the selected file: Via bluetooth or
Via MMS.
Sort the audios and folders by
name or date.
Advanced
Select one by one: select the audio
files one by one and then Cut, Copy
or Delete them.
Select all: select all the audio files
and then Cut, Copy or Delete them.
Cut: Similar to copy, but the original
file will be deleted.
Copy: Copy the selected file to
another folder.
Rename
Modify the name of the selected file.
49
X520_Master_EN.book
Details
Page 50
Tuesday, October 14, 2008
Display the detailed information of
the selected video, such as last
modification time, file size, etc.
Delete
Delete the selected video.
Change view
You can select to view the video
files in List view or Grid view.
Sort
Sort the videos and folders by name,
date, or size.
Select
multiple
Select one by one: select the videos
one by one and then Cut, Copy or
Delete them.
Select all: select all the videos and
then Cut, Copy or Delete them.
3. The folder options and their operations are the
same as Pictures menu.
Videos are played in the middle of the screen. A
status bar is displayed at the top of the screen. The
keypad operations when playing videos are as
follows:
Key
Operation
Start/pause the playback.
Long press to rewind.
50
2:04 PM
Long press to fast forward.
Exit/return to an upper menu level.
Return to idle screen.
Others
You can save all other files into this folder. The file
and folder options and their operations are the
same as the Pictures menu.
Memory status
All memory capacity, used memory capacity and
free memory capacity between all memory capacity
used in both the mobile phone and memory card
will be displayed.
Settings
The phone has a micro SD memory card slot to
increase the phone's memory. The phone supports
FAT16 and FAT32 format for 1GB capacity, and
supports FAT32 format for 2GB capacity. You can
select Uninstall to safely remove memory card from
the phone, and select Format to format it.
For 2GB capacity, in order to ensure the card can
be recognized by the phone, please connect the
card to a computer and format it to FAT32 before
using it for the first time with X520.
My Favorites
X520_Master_EN.book
Page 51
Tuesday, October 14, 2008
10. Business
Calendar
This menu displays the calendar. You can select
Day view, Week view or Month view. You can
create new appointments, view appointments list,
delete or modify appointments in the calendar. The
calendar stores the alarm date and time of every
event. If the current date and time correspond with
the date and time of the event, the phone will emit
an alarm (if needed), and the screen will display a
prompt to indicate that a new event has arrived.
You can create a maximum of 30 events. The list
will display part of the contents. Once you have
selected an event, you can press , to view the
detailed information.
1. Enter the menu. Press , to access View or
press L to access the options menu.
2. The options include: View week, New event, Go
to date, Advanced.
New event
The list of events will be displayed. When you add
a new event, you need to enter the corresponding
Business
2:04 PM
information of the event, such as subject, location,
start date, start time, end date, end time, reminder
and repeat method.
If the memory space for events is full, the phone
will prompt you that there is no more space.
When you edit date and time, the phone will
display the default or the selected date and
time. You can edit or confirm them directly.
The maximum length of an event is 100
characters.
Reminder
On time, 5 min. before, 15 min. before, 1 hour before
and 1 day before.
Repeat method
The phone provides the following repeat methods:
Once, Daily, Weekly, Monthly and Annually.
When you change the date and time of your
phone, the next alert will be repeated based on
the modified date and time of the phone.
When you switched off the phone, the organizer
alert will be postponed until the next time you
51
X520_Master_EN.book
Page 52
Tuesday, October 14, 2008
switch on the phone. For repeated events, only
the latest one will be alerted.
Alarm
This phone supports 24-hour alarm.
The available options are:
Options
Simple
alarm
Reccurent
alarm
Calculator
Your mobile phone has a built-in calculator. Enter
the numbers with the keypad.
Options
Description
A simple alarm rings only once. Set
the alarm status to On or Off by
pressing ,Change. When it is set to
On, you need to specify the alarm
time and press , to confirm.
A recurrent alarm rings according
to the day you specify in a week. Set
the alarm status to On or Off by
pressing ,Change. When it is set to
On, you need to specify the Time and
Repetition. For example, if you select
Sunday and Monday, the alarm clock
will ring every Sunday and Monday.
Then press , to confirm.
Alarm tone
Select an alarm tone.
Snooze
Select On or Off.
52
2:04 PM
Description
Addition
Subtraction
Multiplication
Division
Equals
To toggle between negative and
positive figures.
LOptions >
Add a percentage symbol.
LOptions
> Modular
Calculate a remainder of a division.
Add a decimal point.
The maximum length of the numbers and the
result is 9 digits. The result of the calculator is
indicative.
Business
X520_Master_EN.book
Page 53
Tuesday, October 14, 2008
2:04 PM
Voice recorder
Secretary OTG
This menu allows you to record a voice memo.
From the main menu, select Business > Voice
recorder. Then you can press L to set the MMS size
and select the Storage location. When you set the
MMS size On, the recording will stop if it exceeds
the MMS size limit.
To start recording, press ,Record. During the
process, the recorded time will be displayed in real
time. To stop recording, press , and the file will be
saved in My Favorites > Sounds. Then you could
press , to play the recorded file or press LOptions
to access the following options:
This menu allows you to make long recordings.
From the main menu, select Business > Secretary
OTG.
To start recording, press ,New. During the
process, the recorded time will be displayed in real
time. To stop recording, press , and the file will be
saved. Then you can edit the start date, start time,
and reminders for this recording. Other available
options are:
Options
Options
Description
Delete
Delete the selected file.
Description
Send
Send the selected file.
New
episode
Make another recording.
Rename
Change the name of the selected
file.
Delete
Delete the selected file.
Edit
Send
Send the selected file.
Edit the start date, start time and
reminders of the selected file.
Rename
Change the name of the selected
file.
Details
View the detailed information of the
selected file.
Stopwatch
Your phone features a stop watch and the
minimum unit is 0.1 second.
Business
53
X520_Master_EN.book
Page 54
Tuesday, October 14, 2008
2:04 PM
The starting time is 00:00.0, in the format
“mm:ss.n”, where mm stands for minutes of the
watch, which can be any number from 0 to 59; ss
stands for seconds, a number between 0 and 59; n
stands for 0.x second, x being any number from 0
to 9. The stopwatch will start the timing when you
press ,Start. You can pause the timing, press
,Pause, to resume, press ,Go, to stop the timing,
press RStop.
the count-down even if your phone is in idle
mode.
Countdown
Press # key to enter the decimal point.
This feature is very similar to the alarm clock,
except that you will be alerted of the remaining
time, and the phone will emit an alarm at the end of
the count-down. The alarm tone is the same as
your alarm clock.
The minimum time is 1 minute. The format of the
time is hh:mm:ss, and the maximum time input is 23
hours 59 minutes 59 seconds.
You can edit the time timer and start the
countdown by pressing ,Go. To stop countdown,
press ,Pause, to reset, press LReset. You can exit
the menu by pressing the RBack.
The count-down timer will switch on
automatically and emit an alarm at the end of
54
Unit converter
This application allows you to convert many types
of units such as time, exchange rate, area, energy,
mass, power, pressure, temperature and volume.
Select the type of unit and input the figure and then
press ,Change to calculate the result.
Firewall
This function provides a simple and quick method
for you to avoid nuisance calls and SMS. Blacklist
contains a list of phone numbers from which you
do not wish to receive calls or SMS.
Select Business > Firewall > Set and choose between
the following options:
• Status: Status icon, Event or None.
• Activate: On or Off.
To add the phone numbers into the black list, select
Black list, select Add new, then you can carry out the
following operations:
Business
X520_Master_EN.book
Page 55
Tuesday, October 14, 2008
Option
Operation
New number
Open the phone number editor,
enter the new number and save the
number into the black list.
Contacts
Open the phonebook list and select
a phone number for saving into the
black list.
Delete
Allow you to create a Phone Call
or Task.
Subject
Create a subject for your task.
Call number
(Available
only in Phone
call)
Open the phone number editor, to
edit the selected number in the
black list.
Enter the phone number directly,
or press ,Select for:
• Contacts: Display the list of
contacts for calling.
• Enter number: Enter the
number.
Display on
idle
Delete the selected number in the
black list.
Set On or Off to choose whether
the event will display on screen in
idle mode.
Set Reminder
Set On or Off to choose whether
you want to receive the alert.
When it is set to On, you need to
set the alert date and time. Press ,
to confirm.
Task
This menu allows you to create, store and manage
events in your task list.
Create task
This menu allows you to create a new task. There
are 2 types of tasks: Phone Call and Task. Select New
Business
task and press ,Select to access the following
options:
Type
You can press +/- to select a particular number in
the black list, then press LOptions to carry out the
following operations:
Change
2:04 PM
After you have finished editing, press , to save
your new task.
55
X520_Master_EN.book
Page 56
Tuesday, October 14, 2008
2:04 PM
Manage task
This menu allows you to manage your tasks . Select
a task, then press , to View the task or Call the
contact (depending on if it is the Task or Phone Call)
or press LOption to access the following options:
Mark as (not)
done
Mark a tick on the task as done or
untick for not done.
Edit
Edit the selected task.
Delete
Delete the selected task.
Delete all
Delete all tasks on the list.
56
Business
X520_Master_EN.book
Page 57
Tuesday, October 14, 2008
11. Contacts
2:04 PM
New contact
To create a new SIM/phone contact:
Your phone features two phonebooks. The SIM
phonebook is located on your SIM card and the
number of entries you can store depends on the
SIM card. The second phonebook (Smart
phonebook) is integrated in the phone memory and
the maximum number of name cards you can store
is 2000 (a namecard can consist of a name, 4 phone
numbers, groups, email address, address, etc.).
The SIM card is the default phonebook, but the
entries in the two phonebooks are combined,
sorted and displayed as a list. When you add a new
contact to your phonebook, the new contact will
only be added to the phonebook you have selected.
You can store up to 2000 name cards, provided
other features in the phone such as Calendar,
Sounds, Pictures, and Videos, etc. did not use up
a large amount of the phone's memory space.
Enter new contact
Press , and select New
Contact.
Enter contact
details
Enter the following for SIM
card contacts:
• Name
• Number
Enter the following for
onboard
phonebook
contacts:
• Name
• General
• Mobile
• Home
• Work and etc
Store the new
contact
Press ,Save.
To create a contact, you must enter at least a
phone number.
Most of the fields are free-text, which means you
can enter alphanumeric data using the text entry
functions of your mobile phone (for more
Contacts
57
X520_Master_EN.book
Page 58
Tuesday, October 14, 2008
2:04 PM
information on text entry, see "Text entry" on
page 18).
Send
Contact
Send the selected record: via SMS,
via MMS or via Bluetooth.
View contacts
Copy to
phone/SIM
Copy the SIM/phone entry to
phone/SIM.
Move to
phone/SIM
Similar to copy, but the source
record will be deleted after copying.
Select
multiple
Select one contact at a time or
select all contacts.
In the phonebook, you can display the details of a
contact by selecting it. Then press ,View to view
the details of the selected contact or press
LOptions to carry out the following operations:
Options
Description
New
contact
Create a new contact.
Send
message
Send an SMS or MMS to the contact.
Call
Call the contact.
Edit before
call
Change the contact’s information
before calling the contact.
Call
handsfree
Call the contact by handsfree mode.
Delete
Delete the contact.
Add to
blacklist
Add the contact into the blacklist.
58
View groups
The View groups feature allows you to organize
your contacts so that you can send messages to all
the members of the group. From the Contacts
menu, select View groups and the list of groups is
displayed.
View
Select a group and ,View to display the group
members or press LOptions to access the following
group options:
Options
Description
Rename
Rename the group.
Contacts
X520_Master_EN.book
Page 59
Tuesday, October 14, 2008
Send message
Send an SMS or MMS to
members of a group.
Reset
Restore the group to default
settings.
Special numbers
2:04 PM
Advanced
This menu provides you with advanced features so
that you can view and edit your contacts:
Options
Description
Choose contact list
Default list: Switch contact
list between SIM, Phone or
All.
Default location: Select the
location to store new
contact entry: Phone or SIM
card.
Copy contact
Copy to SIM: Copy all entries
to SIM.
Copy to phone: Copy all
entries to Phone.
This menu allows you to keep a list of useful
numbers such as your own numbers, service
numbers, voicemail and SOS numbers.
Options
Description
My number
View, edit or clear your own
phone number.
Emergency
Display the emergency phone
number.
Voice mail
Dial the number for your
voice mail service provider.
Move contact
Service numbers
This entry of the SIM
phonebook allows you to
select one of the available
services provided by your
operator and to copy it into
the selected phonebook.
Move to SIM: Move all
entries to SIM.
Move to phone: Move all
entries to Phone.
Delete all contacts
Delete SIM entries: Delete all
entries saved in SIM card.
Delete phone entries: Delete
all entries saved in Phone.
Contacts
59
X520_Master_EN.book
Page 60
Tuesday, October 14, 2008
12. Profiles
2:04 PM
Car
Your mobile phone has been preconfigured with
the following modes:
• Personal (default) • Car
• Flight
• Home
• Meetings
• Outdoor
• Silent
You can activate and modify all the modes, except
the Flight mode and Silent mode. These 2 modes can
only be activated and viewed.
The profiles and their respective parameters are as
follows:
Personal
60
Flight
Ring volume
Level 8
Ringtones
Default
Alert type
Vibrate and ring
Key sound
On
Backlight level
Level 4
Ring volume
No volume
Alert type
None
Key sound
Off
Backlight level
Level 3
Ring volume
Level 4
Ring volume
Level 9
Ringtones
Default
Ringtones
Default
Alert type
Vibrate and ring
Alert type
Vibrate and ring
Key sound
On
Key sound
On
Backlight level
Level 3
Backlight level
Level 3
Home
Profiles
X520_Master_EN.book
Meetings
Outdoor
Silent
Profiles
Page 61
Tuesday, October 14, 2008
Ring volume
Silence
Ringtones
Default
Alert type
Vibrate
Key sound
Off
Backlight level
Level 2
Ring volume
Level 9
Ringtones
Default
Alert type
Vibrate and ring
Key sound
On
Backlight level
Level 4
Ring volume
No volume
Alert type
None
Key sound
Off
Backlight level
Level 2
2:04 PM
Profile selection
To select a different profile:
Go to Profiles
menu
Select the
profile
Modify the
profile
Press , to enter the main menu
from the idle mode and select
Profiles.
Press + or -, and press ,Select
to activate the selected profile.
Press LModify. You can modify
the settings of the profile.
Modify settings
The available options include:
Options
Ring volume
Ringtones
Alert type
Key sound
Backlight level
Description
Select from 9 volume levels.
Select the ringtone for Calls,
Alarm, Calendar, Messages or Cell
info.
Select an alert type: Ring only,
Vibrate only, Vibrate and ring,
Vibrate then ring or Silent.
Set the key sound On or Off.
Select a backlight level from
level 1 to level 4.
61
X520_13_Connectivity.fm
Page 62
Tuesday, October 14, 2008
13. Connectivity
This menu provides you with more features to set
up a connection with these external devices.
Bluetooth
Your phone supports Bluetooth wireless
technology, allowing connection to a compatible
Bluetooth device. To ensure interoperability
between other Bluetooth devices, please check
with the manufacturers of other devices. The
Bluetooth connection can be subjected to
interference from obstructions such as walls or
other electronic devices.
To use Bluetooth connection, the device with
which you want to establish a connection must
support Bluetooth function. Please contact the
device's manufacturer or its accompanied
documentation.
Establish a Bluetooth connection
To activate, press , to enter the main menu from
the idle mode and then select Connectivity >
Bluetooth. On the Bluetooth screen, select Activate.
Next, select Search for devices. When the list of
62
6:04 PM
devices appears, select the device you wish to
establish a connection with.
If you do not intend to use the Bluetooth
feature for some time, you should deactivate it
in order to conserve battery power.
Bluetooth menu
Options
Description
Activate
Turn Bluetooth feature on or off.
Search for
devices
Search for the external devices that
you can connect to.
My devices
Display the bluetooth devices that
you can connect to.
Settings
Select to display more features:
• My name: edit the name of the
device
• Visibility: choose to show or hide
the device by selecting On or Off
• My profiles: lists the phone’s
available profiles
When searching for a device, you are presented
with a list of any devices discovered within the
range of your Bluetooth-enabled phone. As soon as
you select a device and a connection is made, you
Connectivity
X520_13_Connectivity.fm
Page 63
Tuesday, October 14, 2008
are prompted to enter a passkey in order to pair
with the device. This passkey is supplied by the
manufacturer of the other Bluetooth device. Refer
to its documentation for further information. The
passkey feature ensures that only legitimate
connections are allowed to connect either to your
device or to the selected device.
USB Function
6:04 PM
Using PhilipsPhoneTools
Besides, your phone can perform PC connections
with
the
supplied
PhilipsPhoneTools.
PhilipsPhoneTools offers instant sychronization
between your phone and your computer, and
enables you to backup your mobile phone data and
recover the data saved in the computer, receive
SMS and edit your mobile phone contacts
Connect your phone to a PC via USB cable, and your
phone will then behave like a USB drive. With your
phone, you can access files on your memory card.
You can upload and download music, videos and
pictures via the USB cable, and the size of file
transfer is unlimited until your memory is full.
Installing PhilipsPhoneTools on your PC
When copying files from your PC to phone, first
insert a Micro-SD memory card into your
phone.
During the installation, interruption may occur
when your PC system detects the new software.
Press Continue Anyway repeatedly until the
installation resumes.
When the transfer is finished, please make sure
that you safely remove your device based on
the instruction of your computer.
Connecting your Phone to the PC
Connectivity
1.
Insert the supplied PhilipsPhoneTools into the
CD drive.
2. Run the Setup.exe program.
3. Make selections as prompted, and installation
starts automatically.
1.
Check that the Phone Setup wizard starts. If
necessary, double click the PhilipsPhoneTools
icon.
2. Connect your phone to the PC as prompted.
63
X520_13_Connectivity.fm
Page 64
Tuesday, October 14, 2008
6:04 PM
3. On your phone, select Connectivity > USB
function > PC Sync from the main menu.
A functional menu appears on your PC screen.
64
Connectivity
X520_Master_EN.book
Page 65
Tuesday, October 14, 2008
14. Calls
2:04 PM
Save to
existing
Save the number in the current the
contacts list.
Send
messages
Send a message to the selected
number. You can send by SMS or
MMS.
Delete
Delete the selected number from the
list.
View calls
Delete all
Delete all numbers from the list.
This menu provides you with a list of calls you have
missed, answered and made. The calls include All
calls, Missed calls, Answered call, Outgoing calls and
Rejected calls, which are displayed in chronological
order with the most recent call at the top of the
list. Select a call from one of the lists and press
,Dial to call or press LOptions to access the
following:
Dial
Call the selected number.
Add to
blacklist
To add the phone number into the
blacklist, see "Firewall" on page 54.
Edit
number
before
dialing
Open the contacts list and edit the
number if it is in the contacts list.
Options
Description
Call options
View
View the detailed information of the
selected call.
Save
Save the number if the number is not
in the contacts list.
Most options described in this chapter are
operator and/or subscription dependent and
require either a PIN2 code or a phone code. For
more information on PIN codes, see "Transfer
backupower" on page 69.
Calls
This menu allows you to configure the call settings:
Options
Description
65
X520_Master_EN.book
Page 66
Tuesday, October 14, 2008
Auto
answer
Turn Auto answer on/off. When this
function is on, the incoming call will
be answered automatically in 10
seconds.
Any key
answer
Turn Any key answer on/off. When
this function is on, you can answer
incoming calls by pressing any key,
except ) and R.
Minute
reminder
Select On or Off to activate or
deactivate the minute reminder
during a call. The default is Off and
the default setting is 45 seconds.
2:04 PM
Call
services
The available options include:
• Call time: Display the duration of
your calls and their charges: Total
incoming calls, Total outgoing calls
and Total calls.
• Call waiting: Select Enable or
Cancel, or check Status.
This
feature
is
network/
subscription dependent.
• Own ID: Select Show ID or Hide ID
or Set by network to display or not
your phone number or identity to
the called party.
• Caller ID: To check your operator
setting of showing the identity of
your caller.
This
feature
is
network/
subscription dependent.
66
Calls
X520_Master_EN.book
Page 67
Tuesday, October 14, 2008
• Cost settings: This option is
available only when the charge
information is included in your
SIM card. You can view
information of the current call and
all recent calls. You need to enter
the PIN2 code to manage
maximum cost credit and unit
rate.
Calls
2:04 PM
Call
forward
Set the following call divert options:
All calls, If no reply, If out of reach, If
busy.
• When All calls is on, all incoming
calls will be diverted to the pre-set
number without any reminder.
• When If no reply is on, incoming
calls will be diverted if the user
does not answer.
• When If out of reach is on,
incoming calls will be diverted to
the pre-set number when the user
is not connected to the network.
• When If busy is on, calls will be
diverted if the user is already
online or the call is rejected.
• You can also check the Status of
your call diverts or Cancel all call
diverts.
67
X520_Master_EN.book
Call
barring
Page 68
Tuesday, October 14, 2008
This menu allows you to limit the
use of your phone to specific calls by
preventing the reception or making
of different types of calls. To activate
call barring, you need to enter a
communication limit code. This
PIN2 code will then be sent to the
network for validation.
2:04 PM
Clear history
This menu allows you to clear the call history in:
Delete all/Missed calls/Answered calls/Outgoing calls/
Rejected calls. Press ,Select to confirm deletion and
RBack to cancel deletion.
Note that this operation only
supports GSM calls.
The types of calls you can bar are as
follows:
• All outgoing calls
• All international calls
• Only here & home
• All incoming calls
• Incoming if abroad
You can also check the Barring status
of your call barring or Cancel barring.
Restricted
dialing
This menu allows you to set the
password to prevent the phone
from being used by another person.
IP number
Dial IP prefix of your network
operator.
68
Calls
X520_Master_EN.book
Page 69
Tuesday, October 14, 2008
15. Settings
2:04 PM
General
This menu allows you to configure some general
settings:
You can configure your Xenium X520 mobile
phone to best suit your usage preference. You can
configure the following settings: General, Display,
Sounds and Connectivity.
Enter the
menu
Press , to enter the main menu
from idle mode and select Settings.
Select a
settings
menu
Press + or -.
Transfer backupower
By
taking
the
advantage
of
the
backupowerTMtechnology, this menu allows you to
transfer power from an AAA battery to the main
battery in your phone. see "Using the
backupowerTM" on page 9
Settings
Options
Description
Languages
Set the display language of the
phone.
Time &
date
• Display time: Select On or Off.
When you select On, the time
information will be displayed in
the idle screen.
• Set time: Set the time in the
format HH:MM.
• Set date: Set the date.
• Time format: Set the time format
as 24 hours or 12 hours.
• Date format: Set the date format
as YYYY/MM/DD, YYYY.MM.DD,
DD.MM.YYYY, YYYY-MM-DD or
DD-MM-YYYY.
69
X520_Master_EN.book
Page 70
Tuesday, October 14, 2008
• International clock: Go to the
international clock menu and
change the time zone.
• Power-on time: Set a time for the
phone to be switched on. You can
select On or Off. When you select
On, you need to enter the time
you want your phone to be
switched on.
• Power-off time: same as above.
2:04 PM
Security
• PIN protection: Select On or Off.
When you select On, you need
to enter the PIN code when you
switch on the phone.
The default PIN code is network
dependent on your service
provider. Please contact your
service operator for the PIN
information.
• Change PIN/PIN2: You can modify
the password for PIN, PIN2,
safeguard and phonelock.
• Safeguard: You can safeguard
important information such as
messages, contacts on your phone
by activating safeguard. You can
also change the safeguard
password.
• Change safeguard password: You
can modify the password for
PIN, PIN2, safeguard and
phonelock.
The default safeguard and
phonelock password is 1234.
70
Settings
X520_Master_EN.book
Page 71
Tuesday, October 14, 2008
2:04 PM
Auto
keypad
lock
Select to activate this feature after
60 seconds, 30 seconds or15 seconds,
or select Off.
Display
Shortcuts
Displays a list of shortcut features.
You can set a new shortcut key by
establishing a link between a certain
feature and a navigation key. You
can also change or delete an existing
shortcut key.
Options
Description
Wallpaper
Turn the wallpaper display On or
Off.
Themes
Select from 2 themes.
Backlight
level
Select from 4 backlight levels. You
can select the backlight level by
pressing + or - keys. Press , to
confirm.
You may configure your phone with different
display settings:
Speed dial
Call a contact by long pressing a
numeric key (see "Speed dial" on
page 13).
Default
storage
Set the default storage location:
Phone memory or Memory card for
different applications.
Backlight
duration
Select the backlight duration from
60 seconds, 30 seconds and 15
seconds.
Memory
status
You can check the memory status of
Contacts, Messages and My Favorites.
You can also check the memory
status of Memory card if it is inserted.
Greeting
Turn greetings On or Off. When you
select On, you can edit the greeting
message.
Mainmenu
style
Select the browse style as List or
Grid.
Factory
settings
Restore your phone settings to the
default values.
Settings
The maximum length of greetings
is 20 Chinese words or 40 English
characters.
71
X520_Master_EN.book
Page 72
Tuesday, October 14, 2008
Sounds
You can set your phone to operate with different
sound profiles. For details, see "Sounds" on
page 72.
2:04 PM
chosen is one that comes as default with your
phone.
Connectivity
Call options
Options
Description
Alert type
You can select Ring only, Vibrate only,
Vibrate & ring, Vibrate then ring or Silent.
Ringtones
Select the ringtone for Calls, Alarm,
Calendar, Messages and Cell info.
For more information, see "Settings" on page 43.
Ring
volume
Select from 9 volume levels.
Key sound
Turn the key sound On or Off.
Shutter
sound
Select from 3 shutter sounds. You
can also select Off.
Low battery
alert
Turn the warning On or Off.
The network name will be displayed on the idle
screen. If the phone is not able to identify the
network name, it will display the country code and
the network code of the unknown network.
Select network
It will vary according to the search mode you have
selected. If you select Auto, the network will be
searched automatically. If you select Manual, the
search will commence only when you confirm to
start searching.
Search mode
You can select Auto or Manual.
If you have downloaded your own ring tones
and have selected such a ring tone to be the
alarm alert, then after you set the alarm and
switched off the phone, the alert tone will be
changed back to the original factory settings.
This does not apply if the ring tone you have
72
For more information, see "Call options" on
page 65.
Message settings
Network settings
Settings
X520_Master_EN.book
Page 73
Tuesday, October 14, 2008
Preferred networks
Preferred network list is stored in the SIM card. It
specifies the priority by which your phone will
register to the available network during automatic
registration.
1. In idle mode, press , to enter the main menu.
2. Select Settings > Connectivity > Network settings >
Preferred networks.
3. Press ,Select to enter the preferred network
list. The most preferred network will be at the
top of the list.
4. Press +/- to select a certain network.
5. You can then press , to Insert or press
LOption and select to Add to end or Delete the
selected network.
2:04 PM
Profile name
To name the current profile
APN
To enter GPRS APN.
Login
To enter a login name.
Password
To enter the password.
GPRS info
This feature allows you to monitor the amount of
data transferred during GPRS connection.
Browser
Various parameters relative to browser can be set
under this option, including WAP profiles and Push
messages.
Connections
GPRS profiles
This menu allows you to configure a GPRS
(General Packet Radio Service) connection to the
network. The available GPRS settings are:
Options
Settings
Description
73
X520_Master_EN.book
Page 74
Tuesday, October 14, 2008
Icons & Symbols
In idle mode, several icons and symbols can be
displayed on the main screen. The status, network
and battery icons are displayed all the time. The
rest of the icons are displayed if the feature is
available, and not displayed if the feature is
unavailable.
If the network symbol is not displayed, it implies
that the network is currently unavailable. You
may be in a bad reception area; moving to a
different location may help.
Network - Network icon comprises of 2
portions. The left portion indicates
whether or not your phone is already
registered with a network, and the right
portion indicates signal strength in 5
levels (from no signal to strongest).
Battery - Indicates battery level with 5
battery level indicator bars. During
charging, a scrolling icon will be
displayed.
2:04 PM
International roaming - Displayed when
your phone is registered to a network
other than your own.
Whether to log on GPRS - There are 2
GPRS status which are mutually
exclusive: GPRS network is available but
not in use; or GPRS network is available
and in use. The icon will be displayed
only when you have logged on to GPRS.
MMS - Indicates there is a MMS
message.
WAP Push message - Indicates there is a
WAP push message. Go to Browser >
Push Inbox to check it.
Voicemail- Indicates voice messages that
have not been heard.
Alarm Clock - Indicates that the alarm
clock is activated.
Vibration - Your phone will vibrate when
there is an incoming call or when the
alarm clock rings.
Firewall - Indicates that firewall feature
is activated
74
Icons & Symbols
X520_Master_EN.book
Page 75
Tuesday, October 14, 2008
2:04 PM
Missed call - Indicates there is a missed
call.
Call forward - Indicates that the call
forward function is activated.
Silence - Indicates that silent mode is
activated.
Auto answer - Indicates that Auto
answer is on.
Keypad Locked - Indicates that the
keypad is locked.
Memory card - Indicates the memory
card is in use.
Bluetooth - Feature is activated.
Icons & Symbols
75
X520_Master_EN.book
Page 76
Tuesday, October 14, 2008
Precautions
Radio Waves
Your cellular mobile phone is a low
power radio transmitter and
receiver. When it is operating, it sends
and receives radio waves. The radio waves
carry your voice or data signal to a base station that
is connected to the telephone network. The
network controls the power at which the phone
transmits.
• Your phone transmits/receives radio waves in the
GSM frequency (900 / 1800 / 1900 MHz).
• The GSM network controls transmission power
(0.01 to 2 watts).
• Your phone complies with all relevant safety
standards.
• The CE mark on your phone shows compliancy
with European electromagnetic compatibility
(Ref. 89/336/EEC) and low voltage directives
(Ref. 73/23/EEC).
Your cellular mobile phone is your responsibility.
To avoid damage to yourself, to others or to the
phone itself, read and follow all the safety
instructions and make them known to anyone
76
2:04 PM
borrowing your phone.Furthermore to prevent
unauthorized use of your phone:
Keep your phone in a safe place and keep
it out of small children's reach.
Avoid writing down your PIN code. Try
to remember it instead.
Switch off the phone and remove the battery if you
are going to leave it unused for a long time.
Change your PIN code after purchasing the phone
and to activate call restriction options.
The design of your phone complies with
all applicable laws and regulations.
However your phone may cause
interference with other electronic
devices. Consequently you should follow all local
recommendations and regulations when using
your cellular phone both at home and when away.
Regulations on the use of cellular phones in
vehicles and aircraft are particularly
stringent.
Public concern has been focused for some time on
the possible health risks for users of cellular phones.
The current research on radio wave technology,
including the GSM technology, has been reviewed
and safety standards have been drawn up to ensure
protection from exposure to radio wave energy.
Precautions
X520_Master_EN.book
Page 77
Tuesday, October 14, 2008
Your cellular telephone complies with all
applicable safety standards and the Radio
Equipment and Telecommunications Terminal
Equipment Directive 1999/5/EC.
Always switch off your phone
Inadequately protected or sensitive electronic
equipment may be affected by radio energy. This
interference can lead to accidents.
Before boarding an aircraft and/or when
packing the phone in your luggage: the use
of mobile phones in an aircraft may be
dangerous for the operation of the aircraft, disrupt
the mobile phones network and may be illegal.
In hospitals, clinics, other health care
centres and anywhere else where you may
be in the close vicinity of medical
equipment.
In areas with a potentially explosive
atmosphere (e.g. petrol stations and
also areas where the air contains dust
particles, such as metal powders).
In a vehicle transporting flammable products (even
if the vehicle is parked) or a vehicle powered by
Precautions
2:04 PM
liquefied petroleum gas (LPG), check first that the
vehicle complies with the applicable safety rules.
In areas where you are requested to turn off radio
transmitting devices, such as quarries or other
areas where blasting operations are in progress.
Check with the vehicle manufacturer that
electronic equipment used in your
vehicle will not be affected by radio
energy.
Pacemakers
If you have a pacemaker:
• Always keep the phone more than 15 cm from
your pacemaker when the phone is switched on,
in order to avoid potential interference.
• Do not carry the phone in a breast pocket.
• Use the ear opposite to the pacemaker to
minimize the potential interference.
• Switch off your phone if you suspect that
interference is taking place.
Users of hearing aids
If you are a user of a hearing aid, consult your
physician and hearing aid manufacturer to learn
whether your particular device is susceptible to
cellular phone interference.
77
X520_Master_EN.book
Page 78
Tuesday, October 14, 2008
Improved performance
In order to improve the performance of your
phone, reduce radio energy emission, reduce
battery consumption and ensure safe
operation adhere to the following guidelines:
For the optimal and satisfactory operation
of the phone, you are recommended to
use the phone in the normal operating
position (when not using in hands-free
mode or with a hands-free accessory).
• Do not expose your phone to extreme
temperatures.
• Treat the phone with care. Any misuse will void
the International Guarantee.
• Do not immerse the phone in any liquid; if your
phone is damp, switch it off, remove the battery.
and let them dry for 24hrs before using them
again.
• To clean the phone, wipe it with a soft cloth.
• Placing and receiving calls consumes the same
amount of battery energy. However, the mobile
consumes less energy in idle screen when kept in
the same place. When in idle screen and while
you are moving, your phone consumes energy to
transmit updated location information to the
network. Setting the backlight for a shorter
78
2:04 PM
period of time as well as avoiding unnecessary
navigating in the menus will also help to save the
battery's energy for longer phoning and stand-by
performances.
Battery information
• Your phone is powered by a rechargeable
battery.
• Use specified charger only.
• Do not incinerate.
• Do not deform or open the battery.
• Do not allow metal objects (such as keys in your
pocket) to short circuit the battery contacts.
• Avoid exposure to excessive heat (>60°C or
140°F), moisture or caustic environments.
You should only use Philips authentic
battery and accessories, as the use of any
other accessories may damage your
phone and may be dangerous, and will
make all guarantees for your Philips phone
null and void. The use of an incorrect type of
battery may also cause an explosion.
Make sure damaged parts are replaced immediately
by a qualified technician and that they are replaced
with genuine Philips replacement parts.
Precautions
X520_Master_EN.book
Page 79
Tuesday, October 14, 2008
• X520 is equipped with a backupowerTMsupported smartcavityTM.
• In the smartcavityTM , use the supplied Energizer
Lithium AAA battery (L92), or quality batteries
to ensure the charging performance.
Do not use your phone while driving
Speaking on the telephone while driving
lowers your concentration, which can be
dangerous. Adhere to the following
guidelines:
• Give your full attention to driving. Pull off the
road and park before using the phone.
• Respect the local regulations in countries where
you drive and use your GSM phone.
• If you want to use your phone in a vehicle, install
the hands-free car kit which is designed for that
purpose.
• Ensure that your phone and car kit do not block
any air bags or other security devices fitted in
your car.
The use of an alarm system to operate a vehicle's
lights or horn to indicate incoming phone calls is
prohibited on public roads in some countries. Check
local regulations.
Precautions
2:04 PM
EN60950 Norm
In case of hot weather or after a prolonged exposure
to the sun (e.g., behind a window or a windscreen),
the temperature of your phone's casing might
increase, especially when featuring a metallic finish.
Be very careful in this case when picking up your
phone and also avoid using it with an ambient
temperature over 40°C.
For your phone, the socket-outlet shall be installed
near the phone and shall be accessible.
Environmental care
Remember to observe the local
regulations regarding the disposal of the
packaging materials, exhausted batteries
and old phone and please promote
recycling.
Philips has marked the battery and packaging with
standard symbols designed to promote the
recycling and appropriate disposal of your eventual
waste.
The labelled packaging material is
recyclable.
79
X520_Master_EN.book
Page 80
Tuesday, October 14, 2008
A financial contribution has been made
to the associated national packaging
recovery and recycling system.
The plastic material is recyclable (also
identifies the type of plastic).
WEEE Marking in the DFU:
“Information to the Consumer”
Disposal of your old product
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by the
European Directive 2002/96/EC
Please inform yourself about the local
separate collection system for
electrical and electronic products.
Please act according to your local rules and do not
dispose of your old products with your normal
household waste. The correct disposal of your old
product will help prevent potential negative
80
2:04 PM
consequences for the environment and human
health.
FCC Compliance Statement
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause
harmful
interference
to
radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment
and receiver.
-- Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Precautions
X520_Master_EN.book
Page 81
Tuesday, October 14, 2008
2:04 PM
Any changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Precautions
81
X520_Master_EN.book
Page 82
Tuesday, October 14, 2008
Troubleshooting
The phone does not switch on
Remove/reinstall the battery. Then charge the
phone until the battery icon stops scrolling. Unplug
from charger and try to switch on the phone.
Your phone doesn’t return to the idle screen
Long press the hangup key or switch off the phone,
check that the SIM card and the battery have been
installed correctly and switch it on again.
The network symbol is not displayed
The network connection is lost. Either you are in a
radio shadow (in a tunnel or between tall buildings)
or you are outside the network coverage area. Try
from another place, try to reconnect to the network
(especially when abroad), check that the antenna is
in place if your mobile has an external antenna, or
contact your network operator for assistance/
information.
The display doesn’t respond (or the
display responds slowly) to key presses
The display responds more slowly at very low
temperatures. This is normal and does not affect
the operation of the phone. Take the phone to a
82
2:04 PM
warmer place and try again. In other cases, please
contact your phone supplier.
Your battery seems to over heat
You might be using a charger that was not intended
for use with your phone. Make sure you always use
the Philips authentic accessory shipped with your
phone.
Your phone doesn’t display the phone
numbers of incoming calls
This feature is network and subscription
dependent. If the network does not send the
caller’s number, the phone will display Call 1 or
Withheld instead. Contact your operator for
detailed information on this subject.
You can’t send text messages
Some networks don’t allow message exchanges
with other networks. First check that you entered
the number of your SMS centre, or contact your
operator for detailed information on this subject.
You have the feeling that you miss some
calls
Check your call divert options.
X520_Master_EN.book
Page 83
Tuesday, October 14, 2008
2:04 PM
The display shows INSERT SIM
Check that the SIM card has been inserted
correctly. If the problem remains, your SIM card
may be damaged. Contact your operator.
When attempting to use a feature in the
menu, the mobile displays NOT
ALLOWED
Some features are network dependent. Therefore,
they are only available if the network or your
subscription supports them. Contact your
operator for detailed information on this subject.
Your phone is not charging
If your battery is completely flat, it might take
several minutes of pre-charge (up to 10 minutes in
some cases) before the charging icon is displayed
on the screen.
83
X520_Master_EN.book
Page 84
Tuesday, October 14, 2008
Philips Authentic
Accessories
Some accessories, such as a standard battery and a
charger, are included as standard accessories in
your mobile phone package. Additional accessories
may also be provided or sold separately. Package
contents may therefore vary.
To maximize the performance of your Philips
phone and not to void the warranty, always
purchase Philips Authentic Accessories that are
specially designed for use with your phone.
Philips Consumer Electronics cannot be held
liable for any damages due to use with non
authorized accessories.
Charger
Charges your battery in any AC outlet. Small
enough to carry in a briefcase/handbag.
84
2:04 PM
Data connect kit
Provides easy data connection to your Philips
mobile phone. The USB cable enables high-speed
communication between your phone and your
computer. The provided software allows you to
download pictures and melodies and to
synchronize your contacts and appointments.
Deluxe Headset
The integrated answer button offers you a simple
way to answer your calls. Simply answer an
incoming call by pressing the button or long press
to reject the incoming call.
X520_Master_EN.book
Page 85
Tuesday, October 14, 2008
2:04 PM
Trademark Declaration
Tegic Euro. Pat.
App. 0842463
T9 ® is a trademark of Tegic
Communications Inc.
Bluetooth™ is a trademark
owned
by
telefonaktiebolaget L M
Ericsson,
Sweden
and
licensed to Philips.
PHILIPS and PHILIPS’ Shield
Emblem are registered
trademarks of Koninklijke
Philips Electronics N.V.
manufactured by Shenzhen
Sang Fei Consumer
Communications Co., Ltd.
under
license
from
Koninklijke
Philips Electronics N.V.
85
X520_SAR.fm
Page 86
Wednesday, November 5, 2008
2:27 PM
Specific Absorption Rate Information
International standards
THIS MOBILE PHONE MEETS THE INTERNATIONAL RECOMMENDATIONS FOR EXPOSURE TO
RADIO WAVES
Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits
for exposure to radio frequency (RF) energy defined by the international standards. These recommendations have
been established by the International Commission on Non-Ionizing Radiation Protection (ICNIRP) and, the
Institute of Electrical and Electronics Engineers (IEEE) that forecast a substantial safety margin for assuring the
protection of all persons, regardless of age and health.
The exposure recommendations for mobile phones use a measurement unit known as the Specific Absorption
Rate (SAR). The SAR limit recommended by the ICNIRP for the mobile phones used by the general public is
2.0W/kg averaged over ten grams of tissue and, is 1,6W/kg averaged over one gram of tissue by IEEE
Std 1528 for the head.
Tests for SAR have been conducted using recommended operating positions with the mobile phone transmitting
at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest
certified power level, the actual SAR levels of the mobile phone while operating are generally below the maximum
SAR value. This is because the phone is designed to operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a base station antenna, the lower the power
output.
While there may be differences between the SAR levels of various phones and at various positions, they all meet
the international protection standards for exposure to radio waves.
The highest SAR value for this Xenium X520 model phone when tested for compliance against the standard was
0.774 W/kg for ICNIRP recommendation and 1.11 W/kg for IEEE Std 1528.
For limiting the radio waves exposure, it is recommended to reduce the mobile phone call duration or to use a
headset. The purpose of those precautions is to take the mobile phone away from the head and the body.
For body worn operation, this phone has been tested and meets FCC RF exposure guidelines when used whit an
accessory that contains no metal and that positions the handset a minimum of 1.5cm from the body. Use of other
accessories may not ensure compliance with FCC RF exposure guidelines.
86
Specific Absorption Rate Information
X520_Master_EN.book
Page 87
Tuesday, October 14, 2008
2:04 PM
Limited warranty
1.
Workmanship During The Limited Warranty
Period?
What Does This Limited Warranty Cover?
During the limited warranty period, Philips or
its authorized service representative will, at its
option either repair or replace, without charge
for parts or labour, a materially defective
Product with new or refurbished parts or
Product and return such repaired or replaced
Product to the Consumer in working
condition. Philips will retain defective parts,
modules or equipment.
Philips warrants to the original retail purchaser
(“Consumer” or “You”) that this Philips
cellular product and all accessories originally
provided by Philips in the sales package
(“Product”) are free from defects in materials,
design and workmanship under normal use in
accordance with the operating instructions and
pursuant to the following terms and
conditions. This limited warranty extends only
to the Consumer for Products purchased and
used in the original country of purchase. The
limited warranty is valid only in Philips’
intended country of sales of the product.
2.
How Long is The Limited Warranty Period?
The limited warranty period for the Product
extends for ONE (1) YEAR from the date of
purchase of the Product, documented by valid
proof of purchase. The limited warranty for
original Philips rechargeable battery extends
for six (6) months from the date of purchase.
3.
Repaired or replaced Product will be covered
by this limited warranty for the balance of the
original limited warranty period or ninety (90)
days from the date of repair or replacement
whichever is longer. Repair or replacement of
Product, at Philips’ option is your exclusive
remedy.
What Will Philips Do if The Product is Not
Free From Material Defects in Materials and
4.
What is Not Covered By This Limited
Warranty?
This limited warranty does not cover:
a)
Product that has been subjected to
misuse, accident, shipping or other
physical damage, improper installation,
abnormal operation handling, neglect,
87
X520_Master_EN.book
b)
c)
d)
e)
f)
g)
h)
5.
88
Page 88
Tuesday, October 14, 2008
inundation, fire, water or other liquid
intrusion; or
Product that has been damaged due to
repair, alteration, or modification by
anyone not authorized by Philips; or
Product that has reception or operation
problems caused by signal conditions,
network reliability or cable or antenna
systems; or
Product defects or problems caused by
uses with non-Philips products or
accessories; or
Product which warranty/quality stickers,
product serial number or electronic serial
number has been removed, altered or
rendered illegible; or
Product purchased, used, serviced, or
shipped for repair from outside the
original country of purchase, or used for
commercial or institutional purposes
(including but not limited to Products used
for rental purposes); or
Product returned without valid proof of
purchase or which proof of purchase has
been altered or is illegible.
Normal wear and tear or Force Majeure.
How Do You Get Warranty Service?
2:04 PM
a)
Return the Product to an authorized
service center of Philips. You may contact
the local Philips office for the location of
the nearest authorized service center.
b) The SIM card must be removed from the
Product before it is given to Philips. Philips
assumes no liability for damaged or loss of
the SIM card or the data contained
therein.
c) If the Product failure is not covered by this
limited warranty, or this limited warranty
is inapplicable, void or invalid due to any
terms and conditions stated herein, the
Consumer will be charged for the cost of
repair or replacement of the Product and
all other related cost incurred in repairing
or replacing the Product.
d) IMPORTANT - you are required to return
the Product together with a valid proof of
purchase which must identify the point of
purchase, date of purchase, Product
model and Product serial number clearly.
6. Other Limitation: This Warranty is The Entire
Agreement.
EXCEPT FOR THE EXPRESS WARRANTIES
SET FORTH ABOVE AND THOSE IMPLIED
BY LAW AND WHICH CANNOT BE
EXCLUDED
OR
MODIFIED
BY
X520_Master_EN.book
Page 89
Tuesday, October 14, 2008
AGREEMENT, PHILIPS PROVIDES NO
OTHER WARRANTY WHETHER EXPRESS
OR IMPLIED (WHETHER BY STATUTE,
UNDER THE OPERATION OF LAW OR
OTHERWISE) AND SPECIALLY DISCLAIMS
ANY WARRANTY OF SATISFACTORY
QUALITY MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.
PHILIPS’ TOTAL LIABILITY FOR DAMAGES
RELATING TO OR ARISING OUT OF THE
PURCHASE OR USE OF THE PRODUCT,
REGARDLESS OF THE TYPE OR CAUSE OF
SUCH DAMAGE OR THE FORM OR
CHARACTERISATION OF THE CLAIM
ASSERTED (E.G. CONTRACT OR TOPIT),
SHALL NOT EXCEED THE ORIGINAL
PURCHASE PRICE PAID FOR THE
PRODUCT.
HOWEVER IN NO EVENT SHALL PHILIPS BE
LIABLE FOR ANY PUNITIVE, SPECIAL,
INCIDENTAL,
INDIRECT
OR
CONSEQUENTIAL DAMAGES (INCLUDING
BUT NOT LIMITED TO THE LOSS OF USE,
LOSS
OF
TIME,
INCONVENIENCE,
COMMERIAL LOSS, LOST PROFITS, LOST
BUSINESS OPPORTUNITIES, COST OF
SUBSTITUTION OF GOODS OR SERVICES,
INVESTMENTS, DAMAGE TO GOODWILL
OR REPUTATION, OR LOSS OF DATA AND
2:04 PM
CLAIMS BY THIRD PARTIES) RESULTING
FROM PURCHASE OR USE OF THE
PRODUCT, TO THE FULLEST EXTENT
ALLOWED BY LAW, WHETHER OR NOT
PHILIPS HAS BEEN ADVISED OF THE
POSSIBILTY OF SUCH DAMAGES. THESE
LIMITATIONS
SHALL
APPLY
NOTWITHSTANDING THE FAILURE OF
THE ESSENTIAL PURPOSE OF ANY LIMITED
REMEDY.
This limited warranty represents the complete
and exclusive agreement between the
Consumer and Philips with respect to this
cellular Product and it supercedes all prior
agreements between the parties, oral or
written, and all other communications
between the parties relating to the subject
matter of this limited warranty. No carrier,
retailer, agent, dealer, employee, thereof, or
employee of Philips is authorized to make
modifications to this limited warranty and you
should not rely on any such representation.
This limited warranty does not affect the
Consumer’s statutory rights under applicable
national laws in force.
89
X520_3e Couv.fm
Page 91
Wednesday, November 5, 2008
Declaration of
conformity
We,
Shenzhen Sang Fei Consumer
Communications Co., Ltd.
11 Science and Technology Road,
Shenzhen Hi-tech Industrial Park,
Nanshan District, Shenzhen 518057
China
declare under our sole responsibility that the
product
Xenium X520
GSM/GPRS/EDGE 850/900/1800/1900
TAC: 35578902
to which this declaration relates, is in conformity
with the following Standards:
SAFETY : EN 60950-1: 2006
HEALTH: EN50360: 2001;
EN62209-1: 2006
EMC: EN301 489-1 V 1.6.1;
EN301 489-7 V 1.3.1;
EN 301489-17 V1.2.1
2:28 PM
SPECTRUM: EN 301 511 V9.0.2;
EN 300 328 V1.7.1
We hereby declare that all essential radio test
suites have been carried out and that the above
named product is in conformity to all the essential
requirements of Directive 1999/5/EC.
The conformity assessment procedure referred to
in Article 10 and detailed in Annex V of Directive
1999/ 5/EC has been followed related to articles 3.1
and 3.2 with the involvement of the following Notified Body: CETECOM ICT Services GmbH, Unterturkhelmer Strabe6-10, 66117, Saarbrucken,
Germany.
Identification mark: 0682
October 20, 2008
Quality Manager

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 91
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:5d67813e-be44-44fd-bc9f-3b7ff8e2011d
Producer                        : Acrobat Distiller 6.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2008:11:05 14:32:00+08:00
Create Date                     : 2008:10:14 14:06:01+08:00
Metadata Date                   : 2008:11:05 14:32:00+08:00
Document ID                     : uuid:9a3246c2-8991-45bf-a42a-8873f1b57701
Format                          : application/pdf
Title                           : X520_Master_EN.book
Creator                         : sf10257
Author                          : sf10257

EXIF Metadata provided by EXIF.tools

Sang Fei Consumer Communications CTX520 GSM/GPRS/EDGE 850/900/1800/1900 digital mobile phone with Bluetooth User Manual X520 Master EN

Shenzhen Sang Fei Consumer Communications Co., Ltd. GSM/GPRS/EDGE 850/900/1800/1900 digital mobile phone with Bluetooth X520 Master EN

Contents

Revised Manual

FCC ID Filing: VQRCTX520

Navigation menu

Namespaces

Views

Navigation