Sang Fei Consumer Communications CTX710 GSM/GPRS 900/1800/1900 digital mobile phone with Bluetooth User Manual X710 En Book

Download:
Mirror Download [FCC.gov]
Document ID	1027371
Application ID	C7Qeh+tKLjtJ02T1MC4pCQ==
Document Description	user manual X710
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	165.11kB (2063895 bits)
Date Submitted	2008-11-06 00:00:00
Date Available	2008-11-08 00:00:00
Creation Date	2008-10-23 10:15:33
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2008-11-03 17:17:51
Document Title	X710_En_Book.book
Document Creator	PScript5.dll Version 5.2
Document Author:	sf10257

X710_En_Book.book
Page 0
Thursday, October 23, 2008
Discover Your Phone
Speaker
Charger
connector/
USB Port
Headset
connector
Left softkey
Navigation
and , keys
Pick up key
Alphanumeric
keypad
10:12 AM
How to ...
Back of the
phone: 3.0
mega pixels
camera
Side volume
keys
262K colo
TFT LCD
Right
softkey
Hang up and
on/off key
Camera key
Philips continuously strives to improve its products.
Therefore, Philips reserves the rights to revise this
user guide or withdraw it at any time without prior
notice. Philips provides this user guide “as is” and
does not accept, except as required by applicable
law, liability for any error, omission or discrepancy
between this user guide and the product described.
The device is meant to be connected to GSM/GPRS
networks.
Switch the phone
On/Off
Long press ).
Lock/unlock
keypad
Long press *.
the
Make a call
Enter the phone number
using the keypad and press
(.
Answer a call
When the phone rings,
press ( .
End a call
Press ).
Activate/
Deactivate
handsfree mode
During a call, press ,H-Free/
H-Held.
Swap primary and
secondary
SIM
cards
PressR Swap SIM on the
idle screen (two SIM cards
inserted). See "About SIM
cards" on page 6.
Access received
messages/missed
calls
Press ,View on the idle
screen.
X710_En_Book.book
Page 1
Thursday, October 23, 2008
Short press # repeatedly.
Long press * to turn T9
input on or off.
Select
methods
input
Access
menu
main
Press ,Menu on the idle
screen.
Access a submenu directly
Press RShortcuts (one SIM
card inserted)
Quickly return
to idle when
browsing menus
Press )..
Vibration on or
off
Long press #on the idle
screen.
Softkeys
The soft keys L, R and , allow you to select
the options above them on the screen. Such
options are contextual: they vary according to
current context.
Main menu
The main menu gives you access to all the different
features of your mobile phone. The table below
summarizes the functional icons on the main menu.
To find more information about their functions,
10:12 AM
refer to the pages.
Fun & Games
Browser
Music
page 34
page 30
page 35
Multimedia
Messaging
My files
page 31
page 16
page 39
Tools
Contacts
Profiles
page 27
page 24
page 44
Bluetooth
Calls
Settings
page 42
page 41
page 45
Press ,Menu on the idle screen to access the main
menu and press +, -, < or > to navigate through the
icons and lists. Press RBack to return to the
previous menu. Press ) to return to the idle
screen.
X710_En_Book.book
Page 2
Thursday, October 23, 2008
check the list of shortcuts. Or press RShortcuts
when one SIM card is installed on the phone.
Fast keys
Long press to enter “+” when
making international calls
Long press to access the voice
mailbox.
Long press to select Meeting
scene (vibration on for incoming
calls or messages)
You can configure the navigation keys +, -, <, > to
access your favorite features directly. Press the
keys to access the features.
Go to Settings > General > Fast keys to check the
default setting of the navigation keys +, -, <, >. To
change the default setting,
1. Select the item to be changed.
2. Press ,Edit to assign a new shortcut to
the key.
3. Press + or - to select, and , to confirm.
Shortcuts
With shortcuts, you can access a functional submenu directly. You can select up to 10 desired
shortcuts and rank them in the order of
preference. Go to Settings > General > Shortcuts to
10:12 AM
To add a shortcut,
1. Press ,Add.
The list of available shortcuts appears.
2. Select your desired shortcut.
3. Press < and > to select its order in the list.
To replace one shortcut with another,
1. Select the shortcut to be replaced.
2. Press LOptions > Edit.
3. Select the desired shortcut, and press ,Select.
The new shortcut is added to the location.
The old one is replaced.
To remove a shortcut,
Select it, and press LOptions > Delete, or Disable.
X710_En_Book.book
Page 3
Thursday, October 23, 2008
10:12 AM
Table of contents
1. Getting Started ..................................6
About SIM cards ................................................6
Insert SIM cards .................................................6
Charge the battery ..........................................8
Set your SIM card slots ....................................8
Set clock...............................................................9
Insert Micro-SD card (memory card) ........ 10
2. Text Entry ........................................11
Select text entry methods ........................... 11
Enter text.......................................................... 11
3. Calling ................................................13
Make a call ....................................................... 13
Answer and end a call ................................... 13
Options during a call ..................................... 14
Handle multiple calls .................................... 14
(network-dependent)
Make an emergency call ............................... 15
Voice mail ........................................................ 22
Broadcast messages........................................ 22
5. Contacts.............................................24
Add or edit contacts ..................................... 24
Search for a contact ...................................... 25
Manage your contacts ................................... 25
Special numbers............................................... 25
Create your name cards ............................... 26
6. Tools ..................................................27
Use your business organizer ....................... 27
Create your to-do list.................................... 27
Check your calendar ...................................... 27
Use your business assistant ......................... 28
Alarm ................................................................. 28
Change clock display ..................................... 28
Stopwatch ......................................................... 29
Others ............................................................... 29
4. Messaging ..........................................16
7. Browser ............................................30
Create messages ............................................ 16
Organize your messages .............................. 17
Define your message settings....................... 18
E-mail ................................................................ 20
8. Multimedia ........................................31
Manage your browser ................................... 30
Access web sites ............................................ 30
Take photos .................................................... 31
X710_En_Book.book
Page 4
Thursday, October 23, 2008
View photos .................................................... 31
Edit photos ...................................................... 31
Videorecording ................................................ 32
Play video clips................................................. 32
9. Fun & Games ................................... 34
Java ..................................................................... 34
Games ............................................................... 34
10. Music ............................................... 35
Music ................................................................. 35
FM radio ............................................................ 36
Sound recorder .............................................. 38
11. My files ............................................ 40
Find your files................................................... 40
Manage your files ........................................... 40
Share your files ............................................... 41
12. Calls ................................................. 42
13. Bluetooth ........................................ 43
About Bluetooth ............................................ 43
Connect to a Bluetooth device.................... 43
Get connected by a Bluetooth device ...... 43
14. Profiles ............................................. 44
Adjust ring settings to different scenes .... 44
10:12 AM
15. Settings ........................................... 45
Dual mode ....................................................... 45
General.............................................................. 46
Call options ...................................................... 47
Network .......................................................... 48
Security ............................................................ 48
Restore factory settings ................................ 49
X710_En_Book.book
Page 5
Thursday, October 23, 2008
10:12 AM
Icons & symbols ...................................50
Precautions ...........................................51
Troubleshooting ..................................56
Philips Authentic Accessories ..........58
Trademark Declaration .....................60
Specific Absorption Rate
Information ...........................................61
Limited warranty .................................62
Declaration of conformity .................65
X710_En_Book.book
Page 6
Thursday, October 23, 2008
1. Getting Started
10:12 AM
1.
Press on the back cover and slide the cover as
shown.
Please read the safety instructions in the
“Precautions” section before using your phone.
About SIM cards
To use your phone, you must insert a valid SIM card
supplied by your network operator or retailer. The
SIM card contains your subscription information,
your mobile phone number and a memory in which
you can store phone numbers and messages.
2. As shown, take out the battery.
With two SIM card slots, X710 allows you to use
two SIM cards or phone numbers on one phone.
Open to calls and messages from the secondary
SIM card (if set to active), you can also choose to
make calls or send messages from the secondary
SIM card.
Insert SIM cards
Follow the steps below to insert your new SIM
cards.Remember to switch off your mobile phone
before removing the back cover.
You may lose all your personal settings if you
remove the battery when the phone is switched
on.
Getting Started
X710_En_Book.book
Page 7
Thursday, October 23, 2008
3. As shown, align your SIM card with the SIM
card slot, clipped corner facing you and gold
contact downwards. Insert your SIM card
under the metal clip holder.
10:12 AM
5. As shown, slide the back cover along the slots
until it is locked.
Slot 1
Slot 2
4. As shown, align the metallic connectors on the
battery and battery slot. Press the battery
down until it is locked.
Getting Started
Remove the protective film covering the screen
before using the phone.
Charge the battery
Your phone is powered by a rechargeable battery.
A new battery is partially charged. The battery
symbol indicates the state of the battery. To charge
the battery, plug in the connector as shown below.
Then plug the other end into a power socket.
X710_En_Book.book
Page 8
Thursday, October 23, 2008
During charging, the battery symbol scrolls. It takes
about 6 hours to fully recharge the battery.
Depending on the network and condition of use,
talk time goes up to 8.5 hours and stand-by time up
to 640 hours in the dual mode and 1,000 hours in
the single mode.
Keeping the charger plugged to the mobile
phone when the battery is fully charged will not
damage the battery. The only way to turn off
the charger is to unplug it, so it is advisable to
use an easily accessible power socket.
If you do not intend to use your phone for
several days, we recommend that you remove
the battery.
You can use the phone while it is charging. If
the battery is completely flat, the battery
symbol will only reappear after a few minutes
of charging.
Set your SIM card slots
The first time you turn on your phone, you may
need to set the two SIM card slots.
To identify the two SIM cards, you can set different
names, ringtones, message alerts, and icons for
10:12 AM
them.
1. Check the Slot 1 and Slot 2 for the SIM cards
(see Step 3 in "Insert SIM cards").
2. Check that your phone is switched on.
Long press ) if necessary. Enter the PIN
code if required. A PIN code is a 4- to 8-digit
secret code of your SIM card. It is
preconfigured and communicated to you by
your network operator or retailer.
If you enter an incorrect PIN code three times
in succession, your SIM card will be blocked. To
unblock it, you must request the PUK code from
your operator.
3. Press ,Yes when asked whether to start setup:
On the slot setup screen,
+ or -: Move to a setup item of the same slot.
L: Enter the edit screen or option list.
RBack: Return to the previous menu.
To switch between two setup screens:
On Slot 1 setup screen, press ,Next;
On Slot 2 setup screen, press RBack.
4. To select the primary SIM,
press ,Next at the end of Slot 2 setup screen;
press < or > to select;
press ,OK to confirm.
Getting Started
X710_En_Book.book
Page 9
Thursday, October 23, 2008
Your phone is turned on. The primary SIM card
appears before the secondary SIM card.
If you select No when asked whether to start
setup, default settings apply. To change the
settings of your SIM card slots, go to Settings >
Dual mode > SIM cards ( see "Dual mode" on
page 44).
To swap primary and secondary SIM
cards,
• Press RSwap SIM on the idle screen.
To edit the card information after the
phone is turned on,
• Go to Settings> Dual mode > SIM cards.
To skip the setup screen when you turn on
the phone,
• Go to Settings> Dual mode > Ask when power on.
Press , to select Off.
Set clock
1. Check that your phone is switched on.
2. On idle screen, press ,Menu and go to Settings
> General > Time & date.
Set time/date: Enter the time and date by using
the numeric keypad.
Getting Started
10:12 AM
Set format: Select the time (12-hour or 24-hour
clock) and date format by pressing the
navigation keys +, -, <, > and ,OK.
3. To display time and date on the idle screen, go
to Settings > General > Display.
Check that Show date and time is set to on.
Display local and international clocks
You can display two clocks on the idle screen, one
showing your local time and one the time of your
destination.
1. Check that you have set your local time and
date.
2. Go to Settings > General > Display.
Check that Show date and time is set to on.
3. On idle screen, press ,Menu and go to Settings
> General > Time & date> International clock.
Clock status: Press ,OK to choose to show
time in a clock or digits.
Local setting/Foreign setting: Press < or >
repeatedly to select a time zone and city. Press
LOptions to turn Summer time on or off.
Insert a Micro-SD card (memory
card)
You can expand the memory of your phone by
X710_En_Book.book
Page 10
Thursday, October 23, 2008
adding a micro-SD card.
Supported format: XXX
Supported capacity: 8G
1.
2.
10:12 AM
4. Press down the card hold and pull it until it is
locked.
Follow Step 1 and 2 under "Insert SIM cards".
As shown, push down the card holder and lift
it up.
3. As shown, align your micro-SD card with the
slot. Put it in place.
10
Getting Started
X710_En_Book.book
Page 11
Thursday, October 23, 2008
2. Text entry
Your mobile phone supports a number of text
entry modes, including T9 input, multi-tap input,
numeric input and symbol input.
Select text entry methods
During text editing, press # repeatedly to
select your desired inputs:
ENG/eng/Eng: for English entry
123: for numeric entry
: Pinyin input for Simplified Chinese
: Stroke input for Simplified/
Traditional Chinese
2. Long press * to switch the T9 English input
on or off.
3. To enter a symbol and punctuations, press
*.
The text editor remembers the last input method
you have used before you exit the editing screen.
When you access the editor again, it will
automatically select the last input method you have
used.
1.
Depending on the language you select for your
phone, the supported input methods may vary.
Text entry
10:12 AM
Enter text
1.
2.
Select your desired text entry methods.
Enter text by using the alphanumeric keypad.
2 to 9 To input letters (T9 input)
Press repeatedly to input the desired
letter (multi-tap input)
1 to 6 To enter strokes (stroke input)
<,>
To browse candidate
words (T9 input/multi-tap input)
+, To browse the candidate words on the
previous/next page (T9 input/multi-tap
input)
,Select To confirm the selection
To input a space
RClear Short press to clear a letter,
long press to clear all entries.
If necessary, press RBack tto exit
the input mode first.
T9® input
T9 ® predictive text input is an
intelligent editing mode for messages,
which includes a comprehensive
Tegic Euro. Pat. dictionary. It allows you to quickly
App. 0842463
enter text. You need to press only
11
X710_En_Book.book
Page 12
Thursday, October 23, 2008
once on the key corresponding to each letter
needed to spell a word: keystrokes input are
analyzed and the word suggested by T9 ® is
displayed at the pop-up window.
Examples: how to enter the word "home":
1. Press 4, 6, 6, 3. The screen displays
the first word of a list: Good.
2. Press - to scroll and select Home.
3. Press ,Select to confirm.
10:12 AM
character, press the keys corresponding to the
required strokes according to sequence to get the
desired character. The stroke input method in this
phone classifies a Chinese character into 5 basic
strokes: (horizontal, vertical, left falling stroke,
right falling stroke and over-down) as well as a
special stroke. When the stroke you need does not
correspond to the 5 basic strokes, replace it with
the special stroke.
Multi-tap input (ABC/Abc/abc)
Press the keys that are marked with the
corresponding letter you wish to enter. Press once
to get the first letter on the key, press twice quickly
to get the second letter and so on until the letter
you want is displayed on the screen.
Example: how to enter the word "home":
Press 4, 4 (GHI) 6, 6, 6 (MNO), 6
(MNO), 3, 3 (DEF). Press , when the message
is completed.
Stroke input
The principle of stroke input is to dissect and
separate every stroke of a Chinese character
according to sequence. When you wish to input the
12
Text entry
X710_En_Book.book
Page 13
Thursday, October 23, 2008
3. Calling
Make a call
From idle screen
1.
2.
Enter the phone number.
Press ( to dial the number.
To make the call using the secondary SIM card,
press L Options > Dial(Secondary SIM).
3. Press ) to hang up.
For international calls, long press 0 to enter
the "+" sign for the international prefix.
Using the phonebook (see "Contacts" on
page 24)
1.
2.
3.
Go to Contacts > View contacts to open the
contacts list.
Select a contact from the list, and press (
to dial the selected number.
To make the call using the secondary SIM card,
press L Options > Dial (Secondary SIM).
For IP calls (China only), select LOptions
> Dial > IP dial or IP dial (Secondary SIM).
You can preset your IP service number under
Settings > Call settings > IP number.
Press ) to hang up.
Calling
10:12 AM
Speed dial
On the idle screen, you can call a contact in your
phonebooks by long pressing a numeric key. To add
a contact to the phonebooks, see "Add or edit
contacts" on page 24.
To assign a speed dial key to a contact:
1. Go to Settings > General > Speed dial.
2. Press ,Select to turn the speed dial on.
To make a speed dial, always check that
the speed dial function is enabled.
3. In Set number, select one of the locations (2
to 9).
4. Assign to the location a contact from your SIM
phonebook.
Answer and end a call
When receiving a call, the number of the caller may
be displayed, depending on whether or not the
calling party has chosen to display his or her ID. If
the number is stored in the phonebook, then the
corresponding name is displayed.
• Answer the call: Press (.
• Divert the call: Press LOptions and select
Deflect. You can set your call divert (service
subscription-dependent) under Settings > Call
settings > Call divert.
13
X710_En_Book.book
Page 14
Thursday, October 23, 2008
• End the call: Press ).
• To answer or end a call using the supplied
one-key headset, see "Headset" on page 57.
The phone will vibrate for incoming calls if it is
in Meeting mode (see "Profiles" on page 44 ).
Options during a call
During a call, you can press , to select H-Free or
H-Held mode. Press LOptions to access the
following options:
- Hold: Put current call on hold.
- New call: Make a new (a second) call.
- Phonebook: Add or view contacts.
- Messaging: Send and receive messages.
- Mute: Mute/unmute the call.
- Enabling DTMF (the touch tone dialing
system).
Mute or unmute a call
During a call, select Options and select to set the
Mute function On/Off. If you select Mute, the
microphone will be deactivated.
Adjust the headset volume
During a call, press + or - side keys to increase or
decrease the volume.
14
10:12 AM
Handle multiple calls (networkdependent)
You can handle two or more calls at the same time,
as well as make conference calls with your phone.
The availability of this feature is dependent on your
network operator and/or your subscription.
Make a second call
You can make a second call when there is an active
call or with a call on hold. While on the phone, dial
the number (or select a contact from the
phonebook) and press (. The first call is put on
hold and the second number is dialed. You can then
select LOptions to access the following options:
• Swap to toggle between 2 calls.
• Conference to introduce the caller into a conference
call.
• Transfer to connect the two calls. You are
disconnected when the transfer is completed.
• End single to disconnect one party from the call.
• End all to disconnect all party from the call.
• New call to make a new call.
• Phonebook to add or view contacts.
• Messaging to send or receive messages.
• Mute to deactivate the microphone.
Calling
X710_En_Book.book
Page 15
Thursday, October 23, 2008
Answer a second call
When you receive a second call while already in
communication, the phone will emit a beep tone
and the screen displays information about the
incoming call. You can then:
Press (
To answer the call (the first one
is put on hold).
Press R or
To reject the call.
Press L
Options
You can select Answer, Hold
Active, End Active to hold or end
the current call and answer the
incoming call.
10:12 AM
Note that an emergency call will not be stored
in the call record.
In Europe, the standard emergency number is
112, in the UK, it is 999.
To receive a second call, you must first
deactivate Call Divert (see 47)and activate Call
Waiting (see 47).
Make an emergency call
Without a SIM card in phone, you can pressR
SOS to make the emergency call.
With a SIM card in phone, you can enter the
emergency number in the idle mode, then press
(.
Calling
15
X710_En_Book.book
Page 16
Thursday, October 23, 2008
4. Messaging
Create messages
SMS
SMS enables you to send text messages to the
other party, using Short Messaging Service (SMS).
You can use the SMS menu to send messages to
another handphone or a device that is capable of
receiving SMS. To compose and send an SMS,
follow the steps below:
1. Select Create message > SMS, and write your
message.
2. Press LOptions to access the following
options:
Save as draft Save the SMS message to Drafts.
Insert object
Select to insert an icon, animation
or sound file
Insert contact, Select to insert the name and
Insert
phone number of your contacts,
bookmark
or website information you saved
as a bookmark (see "Access web
sites" on page 30).
16
10:12 AM
Use template
Format Text
Select to insert a preset message.
Select text settings before
entering text (Text Style and Text
Size applicable to English text,
numbers and symbols only).
Input method Select your desired input method.
3. Press ,Send to send the message to the
desired contact or contact group (see
"Contacts" on page 24).
MMS
Your mobile phone can also send and receive MMS
(Multimedia Messaging Service) messages. With
MMS, you can send messages that contain pictures,
sound and text.
When sending MMS messages, make sure that your
recipient also has an MMS-enabled phone in order
to view your messages. Follow the steps described
below to compose and send an MMS.
Messaging
X710_En_Book.book
Page 17
Thursday, October 23, 2008
10:12 AM
Select Create Message > MMS. Press + or - to
select:
To
Enter the number or e-mail of
the recipient.
Add slide
before, Add
slide after
Cc
Enter the number or e-mail of
other recipients to whom you
wish to send a copy of the
message.
Bcc
Enter the number or e-mail of
the recipients to whom you
wish to send a copy of the
message, by which the
recipients in the Bcc list will be
invisible to other recipients.
Add
bookmark
text
Preview
Slide timing
1.
Subject
Enter the subject of the MMS.
2. In Edit content, press LOptions:
Add image,
Insert image, audio or video
Add audio,
files to your MMS.
Add video
Add
Insert a file (txt, jar etc) to
attachment
your message.
Messaging
Adjust the slide sequence as
desired.
Add website information you
saved as a bookmark (see
"Browser" on page?30)
Preview the current MMS.
Set the play time of MMS
slides. The default value is 3
seconds.
3. Press ,Done to access the next option:
Send only
Send the MMS message only.
Save and
send
Save and Send the MMS
message.
Save to draft Save the MMS to Drafts.
Save as
template
Save the MMS to as a preset
message.
Save options
Set Validity period, Delivery
report, Read report, and
Priority.
Exit
Exit
17
X710_En_Book.book
Page 18
Thursday, October 23, 2008
Use templates for messages
You can use ready-made messages as new
messages. 10 SMS and 5 MMS messages are preset
in the Templates folder. You can also save a
message as a template.
1. Select Templates > SMS or MMS.
2. Select your desired templates.
3. Press ,Select to confirm.
The ready-made messages appears on the edit
screen.
Organize your messages
Your messages are sorted in the following folders
on your phone memory and SIM cards:
Inbox: received messages
Sent: sent messages
Outbox: unsuccessfully sent messages
Drafts: messages saved as drafts
Find a message
1.
2.
3.
Enter a folder, and press < or > to select the
message location, phone or SIM cards.
Press - to go to the message list.
Press + or - to select a message.
Manage messages
Press LOptions to access the following options:
18
10:12 AM
For the SMS or MMS, or different folders,
available options may vary.
Reply
Reply to the sender.
Reply to the sender using the other
Reply
(Secondary SIM card.
SIM)
Reply by
SMS
Reply to the MMS sender via the
SMS.
Reply all
Reply to the sender and all recipients
on the Cc and Bcc lists.
Dial
Make a call to the sender.
Dial
Call the sender using the other SIM
(Secondary card.
SIM)
Forward
Forward the selected message.
Send
Send the selected message.
Edit
Edit and send the selected message.
Save as
template
Save the selected message as a
preset message.
Messaging
X710_En_Book.book
Page 19
Thursday, October 23, 2008
Use details,
Use
number,
Use E-maill
address,
Use URL
Extract the number or E-mail
address of the sender or in the
message to create messages, make a
call, or save to the phonebook.
Extract the URL in the message to
connect to the website, add as a
bookmark
Delete
Delete the selected message.
Delete all
Delete all messages in the folder.
Advanced
Copy or move all or selected
messages between your primary SIM
card and phone.
Properties
Show the file information of current
message.
Define your message settings
Some of your message settings are dependent on
the service you subscribe with the network
operator. Consult your network operator for your
account settings, general settings, server profile, or
other relevant settings.
Messaging
10:12 AM
In Settings > SMS > SMS settings,
Profile
Profile name: Edit the name of the
settings
current profile.
SC address: Select your default SMS
center. If not available on your SIM
card, you must enter your SMS
center number.
Validity period: Select the length of
time your messages will be stored
in the SMS centre. This is useful
when the recipient is not
connected to the network (and
thus cannot receive your message
immediately).
This feature
dependent.
is
subscription
Message type: Select the format of
your sent messages. This option is
network dependent.
19
X710_En_Book.book
General
settings
Page 20
Thursday, October 23, 2008
Delivery report: When set to On,
this option will inform you via SMS
whether or not your own SMS was
received.
This feature
dependent.
is
subscription
Reply path: When On, this option
allows you to transmit the number
of your SMS message center
together with the message. The
recipient can then reply using your
SMS center and not theirs. This
speeds up the rate of transmission.
This feature is subscription
dependent.
Preferred
storage
location
(for primary
SIM card
only)
20
Select where is your message
stored, your SIM card or phone.
Before the memory is full, all your
messages will be stored in the
selected location. To check the
memory status, select Memory
status.
10:12 AM
This option allows you to set the
preferred transmission mode. You
can select Preferred GPRS, Preferred
GSM or GSM only. For further
details, please contact your
network operator.
In Settings > SMS ,
Preferred
bearer
(for primary
SIM card
only)
Memory
status
This option can display the
memory status of the messages
saved in the SIM card and the
phone.
Auto save
SMS
Press Lto select On or Off.
On: The message is sent and save
to the Sent folder.
Off: The message is sent only.
In Settings > MMS,
Create
Set Creation mode, Image resizing Auto
signature and Signature content.
Send
Set Validity period, Delivery report,
Read report, Priority, Slide timing and
Delivery time options for sending an
MMS.
Messaging
X710_En_Book.book
Page 21
Thursday, October 23, 2008
Retrieve
Set Home network, Roaming, Read
report and Delivery report options for
receiving an MMS.
Filter
Set Anonymous, and Advertisement
from whom you want to filter MMS
or e-mail messages.
Server
profile
Set network configuration. Please
contact your network provider for
more information.
Memory
status
View the memory status of your MMS.
E-mail
If not included in your mobile phone contract,
you will need to subscribe to an e-mail service
in order to send and receive e-mails. In this
case, all parameters are communicated to you
by your operator.
This menu allows you to send e-mails to one or
several recipients at a time, including with an
attachment such as a JPEG picture. Once received,
your messages can be forwarded and the
attachments can be visualized with the appropriate
software.
Messaging
10:12 AM
Set up E-mail accounts
This menu allows you to Activate, or Edit one of the
available email profiles. You can also create a new
Email account. Consult the network operator for
the account information.
Write E-mail
To write an E-mail, select E-mail > Write e-mail.
Enter the address (To), a copy (Cc), a blind copy
(Bcc), Subject and Attachment (up to 3 files), and
the e-mail content. When you have finished writing
your e-mail, press Done. You can then select to
Send, Send and save, Save to draft or Quit without
Saving.
To use a template for your E-mail, select E-mail >
Template. Select your desired template, press
LOptions to edit or create your mail.
If you exit the E-mail > Write E-mail menu before
sending your e-mail or if you cancel the sending
while it takes place, the e-mail content is
deleted without being stored.
Send and receive E-mails
This menu allows you to send E-mails from your
phone to the internet, and receive e-mails from the
internet to the mailbox you have preset on your
phone.
21
X710_En_Book.book
Page 22
Thursday, October 23, 2008
You can only attach one file (JPEG, MID, JAR,
TXT, MP3) or one sound at a time. If you
accept an incoming call while writing an e-mail,
the menu is closed and the phone goes back to
idle mode when you hang up.
Organize your E-mails
In this phone, your messages are sorted in the
following folders:
Inbox: received E-mail
Unsent: unsuccessfully sent E-mail
Sent: sent E-mail
Drafts: Email saved as drafts
Enter a folder and select a desired message. Press
LOptions to access the following options::
Reply
Reply to the senders.
Reply without
content
Reply to the sender without the
email history.
Reply all
Reply to all senders.
Reply all
without
content
Reply to all senders without the
email history.
Forward
Forward the downloaded e-mail to
someone else.
22
10:12 AM
Mark as
unread
Displays the unread messages.
Mark as
deleted
Displays the messages to be
deleted.
Delete
Mark the E-mail to be deleted
(select this option again to unmark
it). When you exit the e-mail menu,
you will be asked to confirm
deletion of the selected item(s)
from the e-mail server.
Messaging
X710_En_Book.book
Page 23
Thursday, October 23, 2008
Voice Mail
This menu allows you to set your voice mail server
number, as well as retrieve your voice mails.
Consult the network operator for the account
information.
Select a voice mail box. Press , to edit the number
of your voice mail server, and LDial to retrieve
your voice mail.
10:12 AM
Languages
Set language for the broadcast
message to be received.
Channel
settings
Define the channel
broadcast messages.
for
Broadcast messages
Broadcast messages are public messages
broadcasted to a group of mobile users. The
messages are broadcasted on coded channels.
Generally, one broadcast channel can transmit one
type of message. Please contact your network
operator for a list of channel numbers and their
respective broadcast information.
Define settings for broadcast messages
In Broadcast messages,
Receive
mode
Press , to turn the receive
mode on or off.
Read
message
Read messages when there are
received broadcast messages.
Messaging
23
X710_En_Book.book
Page 24
Thursday, October 23, 2008
10:12 AM
5. Contacts
2.
Contacts are stored in one of the three available
phonebooks: SIM phonebooks (located on your
SIM cards, by which the number of entries you can
store depends on the card capacity) or the Smart
Phonebook (located on your phone, which allows
you to store up to 1000 names). New contacts will
only be added to the phonebook you have selected.
Add or edit contacts
Add a contact to Smart Phonebook
For contacts on the Smart Phonebook, you can add
detailed information, like home number and office
number, and identifying features, like contact
pictures and ringtones.
1. Go to Contacts > New contacts >To phone.
Name: Press ,Edit to go to the editing screen.
To select input methods, press #
repeatedly; long press *to turn T9 input on
or off. Press RBack to exit the input mode,
if necessary. Press LOptions > Done to finish
editing.
24
3.
4.
Mobile number: Enter the mobile number.
Save the entry.
Go to Contacts > View contact. Press < or > to
select Phone. Press - to go to contacts list on
the Smart Phonebook.
To add details to a contact,
Select the desired contact. Press ,View. Press
LOptions > Add detail. Select desired items,
and press ,.
When selecting a ringtone or contact picture,
press < or >.
Save the entries when finish editing.
You can add entries in up to 8 fields.
The ringtones for your SIM cards can be
replaced by the ringtone you select for a
contact, if there is an incoming call from such a
contact.
Add a contact to SIM phonebooks
1.
2.
Go to Contacts > New contacts >To
SIM(primary SIM or secondary SIM2).
For information editing, see Step 2 under
"Add a contact to Smart Phonebook"
Edit a contact
1.
Go to Contacts > View contacts.
Contacts
X710_En_Book.book
2.
3.
Page 25
Thursday, October 23, 2008
Select your desired contact (see "Search for a
contact"). Press ,View.
Press ,Edit to edit the name and phone
number.
Search for a contact
1.
2.
Go to Contacts > Search contact.
Enter the contact name in full or part.
Press # repeatedly to select an input
method.
3. Press LOptions > Search to start searching
for a contact in all the phonebooks.
If necessary, press RBack tto exit the input
mode first.
You can also
1. Go to Contacts > View contact.
2. Press < or > to select a phonebook, and - to
go to the search text box.
3. Enter the contact name (up to 5 characters).
Press # repeatedly to select an input
method.
4. To search for another contact, press RBack
to return to the contacts list. Press RBack
again to select a phonebook. Follow Step 2
and 3.
10:12 AM
Manage your contacts
You can copy or move your contact entries
between the three phonebooks. Also, you can
group your contacts as Family, Friends, Business
and others as you like. For different groups, you can
use different ringtones and contact pictures for
identification, and send messages to a group.
Copy or move a certain contact
1.
2.
3.
Copy or move all contacts
1.
2.
Go to Contacts > Advanced.
Press + or - and , to select Copy all or Move
all. Select your desired option.
Delete contacts
1.
2.
Go to Contacts > Advanced > Delete.
Select the desired option to delete a phone or
contact (default password: 0000).
Group contacts on the Smart Phonebook
1.
Contacts
Go to Contacts > View contacts.
On the View contacts screen, select the desired
contact (see "Search for a contact").
Press LOptions to select Copy > Copy to
phone or Copy to SIM (primary SIM or secondary
SIM2), or Move > Move to phone or Move to
SIM (primary SIM or secondary SIM).
Go to Contacts > Caller groups.
25
X710_En_Book.book
2.
3.
Page 26
Thursday, October 23, 2008
Select a group. You can rename the group,
select a ringtone and a contact picture, and
add contacts to Members List.
Press RDone to save your entries.
The ringtone for a group sounds, if there is an
incoming call from a member in the group.
The ringtone for a group can be replaced by the
ringtone you select for a member in the group,
if there is an incoming call from such a member.
10:12 AM
Create your name card
With a name card, you can conveniently send your
contact information to others when necessary.
Create a name card
1.
2.
3.
Go to Contacts > Advanced > My vCard > Edit
my card.
Select the desired item. Press , to edit.
For information editing, see Step 2 under
"Add a contact to Smart Phonebook".
Special number
Send your name card
This menu allows you to keep a list of useful
numbers such as own numbers, service numbers,
and emergency numbers.
2.
Options
Description
My number
Press Options > Edit to edit your
own phone number.
Service
number
This service is provided by your
network operator. For more
information
regarding
the
corresponding function, please
contact your network operator.
SOS
Press ,Edit to edit your emergency
phone number.
26
1.
Go to Contacts > Advanced > My vCard > Send
my card.
Select your sending options.
Contacts
X710_En_Book.book
Page 27
Thursday, October 23, 2008
6. Tools
10:12 AM
Repeat
Use your business organizer
You can add your to-do work to the phone. Such
to-do tasks are marked in your calender. You can
always check your calendar and remind yourself as
desired.
4.
Create your to-do list
1.
2.
3.
In Tools > To Do List, press ,Add or
LOptions > Add to add a kind of task.
You can also add a task in Tools > Calendar:
select a date in the calendar, press LOptions
> Add task.
When setting a task, specify the date and time.
To keep yourself reminded, do the following:
Note
Add a note about the task.
Alarm
Press < or > once or more to turn the
alarm on, have it sound 5,15 or 30
minutes before the specified time, or
turn the alarm off.
Tools
Press < or > once or more to repeat
the alarm at the specified time once,
everyday, weekly or monthly.
To repeat the alarm at certain days,
press < or > to select Days, - and < or
> to select a weekday or weekend,
and press L to turn the alarm on or
off on the certain day.
For an existing task, you can do the following
in the Tools > To Do List > LOptions:
Edit
Edit an existing task.
Delete
Delete the selected task.
Delete all
expired
tasks
Delete the tasks that have passed the
set time.
Delete all
Delete all the tasks.
Send
vCalenda
Send the task as a message.
Check your calendar
After creating your to-do lists, you can check your
calendar in day, weekly, or monthly views. In Tools
> Calendar, press LOptions or ,View.
27
X710_En_Book.book
Page 28
Thursday, October 23, 2008
You can also create your to-do list in the calendar
of different views.
Use your business assistant
Such features provide you with convenience.
Alarm
You can set up to five alarms.
To set an alarm,
1. Check that your clock is correctly set (see
"Set clock" on page 9).
2. Go to Tools > Alarm.
The screen of alarm list appears.
3. Select an alarm, and press ,Edit to enter the
alarm setting screen.
On or Off: Press < or > to turn the alarm on or
off
00:00: Set the alarm time.
Repeat: Repeat the alarm once, everyday, or
on one or some of the weekdays or
weekends.
Audio options: Select an alarm tone: Ringer or
FM radio.
To use ringer as the alarm tone, press -, and
then LOptions to select a ringtone;
To use FM radio as the alarm tone, press -,
and then LOptions to select a preset station
28
10:12 AM
in Channel List, or enter a radio station
frequency in Manual Input.
Snooze: Select an alarm interval: Default (5
minutes), or 1 - 10 minutes.
Make sure that the preset radio station is in
service at the set alarm time if you use FM radio
as the alarm tone.
To use an alarm,
On the set alarm time, your alarm sounds or the
FM radio plays.
Select Stop: The alarm stops. If you have selected
repeat mode for the alarm (see “To set an alarm”),
it will sound again at the set time.
Select Snooze: The alarm will sound again after the
set Snooze interval. You can select Snooze three
times.
The alarm clock will ring even if your mobile
phone is switched off, or in Silent or Meeting
mode (see "Profiles" on page 44).
Change clock display
As you travel from one time zone to another, you
may need to change your local clock settings.
1. To retain the clock of you home country,
switch the clock to a foreign clock if
Tools
X710_En_Book.book
2.
Page 29
Thursday, October 23, 2008
necessary:
Go to Settings > General > Time and date >
Time and date > International clock > Switch
local/foreign. Press ,Change.
Go to Tools > World clock to select your local
settings:
Press < or > repeatedly to select a time zone
and city. Press LOptions, and press , to turn
Summer time on or off.
On the idle screen, the local clock is changed.
Stopwatch
The two types of stopwatches provide you with
three timing options.
Typical stopwatch
1. Go to Typical Stopwatch. You can select:
Split timing
Split the timing span manually and
as desired.
Lap Timing
Time lap by lap.
2. Press ,Start to start timing.
3. Press RSplit or Lap to make a split or lap.
A time split or lap span appears on the screen.
4. Press ,Stop to stop timing.
5. Press RBack to save or cancel the timing
record.
Tools
10:12 AM
Press ,Continue to continue timing.
Press LReset to cancel timing.
Nway stopwatch
With the Nway stopwatch, you can time a process
continuously in four stopwatches (time spans).
Press the Navigation keys +, -, < and > to start the
four stopwatches respectively.
Others
Calculator:
Enter figures by using the the numeric keypad.
Press +, -, <, > or ,Ok to select “+”, “-”, “/”, “x”or
"=" for your calculation. Press * to enter a
decimal point.
Unit converter:
Convert between international and British units.
Currency converter:
Convert between different currencies based on
exchange rates.
The result of the calculator is indicative only.
The calculation accuracy is 10 decimal places.
The result is then truncated after the 10th
decimal digit for the next operation.
29
X710_En_Book.book
Page 30
Thursday, October 23, 2008
7. Browser
You can use this function to browse the Internet.
Consult your network operator for the service
subscription, data account information, and WAP
settings.
If you subscribe the service for one of your SIM
cards, use the SIM card as the primary one.
10:12 AM
this way, you save and quickly access your favorite
websites, and forward them in your messages (see
"Create messages" on page 16).
WAP > Recent pages: Access a web site you visited
before.
WAP > Offline pages: Access web pages you saved.
Manage your browser
In Browser > WAP > Settings,
Edit profile: Define or select your Internet access
settings.
Browser options: Define the time for an access
attempt, choose whether to show images on web
pages.
Clear cache, Clear cookies: Clear the history and
cookies of the browser.
Access web sites
You can access a web site in different ways:
WAP > Home: Save a web page as your homepage.
WAP > Enter address: Enter a web site address.
WAP > Bookmarks: Save a website as a bookmark. In
30
Browser
X710_En_Book.book
Page 31
Thursday, October 23, 2008
8. Multimedia
10:12 AM
other resolutions, your photo will not be
displayed in full screen.
View photos
Your mobile phone features a digital camera that
allows you to take pictures (up to 3.0 Mega pixels)
and record short video clips.
Take photos
On the idle screen, long press the camera key,
or go to Multimedia > Camera,
• Press the camera key gently to focus. A blue
square appears. Hold down the camera key until
the auto focus is completed and picture
captured.
• Press + or - to decrease or increase the
brightness.
• Press < or > to zoom out or in.
• To select your desired photo settings, and
storage location, press LOptions; to return to
the default settings, select Restore default settings.
Your selected settings are shown as icons on the
screen.
• Before taking a photo for contact picture or
wallpaper, press LOptions > Image settings >
Image size, and select Wallpaper. If you select
Multimedia
With the image viewer, you can browse and edit
the photos you have taken.
Go to Multimedia > Image viewer. The photos you
have taken are displayed. Press LOptions to
select your browsing and editing options.
When viewing a photo, press 1 to zoom in, 2
to zoom out, and 3 to rotate a photo.
To use a photo as contact picture,
Select the photo, and press LOptions > Use > To
phonebook (see "Add a contact to Smart
Phonebook" on page 24).
If a picture is too large to be set as a contact
picture, press LOptions > Edit > Auto resize to
resize your photo, and then press LOptions >
Save as to save the photo as desired.
Before taking a photo for contact picture, always
set the Image size to Wallpaper: Go to Multimedia
> Camera, press LOptions > Image settings >
Image size, and select Wallpaper.
Edit photos
You can edit your photos before sending them via
31
X710_En_Book.book
Page 32
Thursday, October 23, 2008
the MMS or saving them for other purposes.
Add to or clip from photos
1.
2.
Go to Multimedia > Photo editor > Photo artist,
and select your desired photo from My files >
Phone or Memory card > Picture.
To add effects, contents, or changes,
select Auto resize, press LOptions, and select
your desired addition or change;
To clip a portion,
select Main LCD clip, press +, -, <, > to select
the desired clip, and press , to select and
confirm.
Piecing photos together
You can make a photo consisting of 2, 4 or 9
photos.
1. In Multimedia > Photo editor > Image tile, select
your desired option.
2. Press LSelect to select a photo from My files
> Phone or Memory card > Picture.
3. To clip the photo, select Clip image.
(See "To clip a portion" in Step 2 of "Add to
or clip from photos").
4. Follow Step 2 and 3 to select desired photos.
5. Press LOptions and select Save as:
Select your desired storage location, and then
32
10:12 AM
press , to select a folder, assign a name and
save the photo.
Videorecording
In Multimedia > Video recorder,
• Press , to start or pause videorecording.
• Press Rto stop recording.
• To select your desired video recorder settings,
video file settings, and storage location, press
L; to return to the default settings, select
Restore default settings.
• Press + or - to decrease or increase the
brightness.
• Press side volume key + or - > to zoom in or out.
Play video clips
Your video recording is saved to My files > Phone
or Memory card > Video.
1. Go to Multimedia > Video player.
2. Select the desired video file. Press ,Play to
start or pause playback.
In the full screen, press R to display the
functional menus.
Long press < or > to search backward or
forward.
Press + or - to select playback speeds.
Multimedia
X710_En_Book.book
Page 33
Thursday, October 23, 2008
10:12 AM
Press the side volume key + or - to adjust the
volume.
Press R to stop playback.
To select your video setting
On the video playback screen, press L, and
select Video settings.
To play sound through a Bluetooth
headset
On the video playback screen, press L, and
select Bluetooth settings > BT stereo headset to
connect a Bluetooth headset. For more
information, consult the user documentation of
your Bluetooth headset.
Multimedia
33
X710_En_Book.book
Page 34
Thursday, October 23, 2008
9. Fun & Games
Java
Your mobile phone features a Java run-time
environment, which allows you to run Java
applications, such as games downloaded from the
network.
The first time you launch Java, a message appears to
alert you that the installation and configuration of
Java will take several moments.
10:12 AM
Games
Select a game and press ,. For details regarding a
certain game, please refer to the onscreen
instructions.
Game Settings
This menu allows you to turn the audio and
vibration effect of the games on or off.
Select Background Music, Sound Effects or Game
Vibration, then press the  to select On or Off and
press , to confirm.
This phone only supports Java games
downloaded from the network provider based
on this handset model.
Java settings
Once Java has been installed, you may then proceed
to set the following:
Java Audio
Allows you to set the volume level.
Java Vibration Allows you to turn the vibration
effect On or Off.
Heap Size
34
Displays the maximum allowed size
for Java memory.
Fun & Games
X710_En_Book.book
Page 35
Thursday, October 23, 2008
10. Music
Music
Save MP3, WMA, AAC, and WAV music files under
the Audio folder on your phone or memory card.
You can play the music on your phone.
Create your music library
Edit music files on your PC
1. Run Windows Media Player (or other music
management program) on your PC.
2. To add music files, click Media Library on the
left menu, and then click Add on the top menu.
3. On the left pane, select All Music.
On the right pane, all the music files you
added are displayed.
4. Click Title, Artist, Album to edit them as
desired.
Operations may vary according to music
management software or Windows Media
Player versions. Consult the help file of the
software.
Music
10:12 AM
Transfer music files from PC to your phone
1. Use the supplied USB data cable to connect
your phone with the PC. Select Mass storage
on your phone.
2. Copy the music files from the PC to the Audio
folder on your phone or memory card (see
"Insert Micro-SD card (memory card)" on
page 9).
3. Remove your phone (a USB mass storage
device) from the PC safely.
4. On your phone, go to Music > Music player >
Settings > Refresh all lists.
All the music files are transferred to your
phone.
Play music
The music files are organized in two folders.
Tracks: all the songs on your phone.
Artists: songs sorted by artist.
Play music files
1. Select your desired song in a folder.
You start playback from the song. On the
playback screen, the file information and
selected playback settings are displayed.
2. To select your plackback settings,
Press LOptions > Play mode:
Repeat one: Play current file repeatedly.
35
X710_En_Book.book
Page 36
Thursday, October 23, 2008
Repeat All: Play all the files in the folder
repeatedly.
Shuffle and repeat: Repeat music files in the
folder randomly.
Shuffle: Play music files in the folder randomly.
Press LOptions > Equalizer to select sound
settings suitable to your songs.
3. To return to the playback screen, press
RBack. Or, select Now playing on the Music
screen.
During playback (on the playback or idle
screen)
< or >: press repeatedly to select a song
< or >: long press to select a section within a
song
+: press repeatedly to select sound settings
Volume side keys: adjust the volume
,: pause and resume playback
- : stop playback
): go to the idle screen
To continue to play music after exiting the
music player,
go to Music > Music player > Settings > Music in
background, and select Ask first or Always.
36
10:12 AM
Create playlists
You can create up to 10 playlists for songs that you
wish to play at this time. Your last played songs are
saved to Music player > Last played.
1. Select your desired songs.
2. Press LOptions > Add to playlist to add songs.
3. Select a playlist where you add the songs.
A playlist is created.
Create ringtones
You can add a song to your ringtone list, and set it
a ringtone as desired.
1. Select a song, and press LOptions > Add to
ringtone list.
2. To set the song as your ringtone, go to Profiles,
and select your desired one (Flight mode and
Silent mode unchangeable). Press LOptions
> Ringtone to select your desired song. Apply
the profile ("Apply a profile").
FM radio
Tune to a radio station
To tune to a radio station, always plug the supplied
earphone into your phone.
• Auto tune: In Music > FM radio, press
LOptions > Auto presets. The radio frequency
scanning starts automatically. Up to nine available
Music
X710_En_Book.book
Page 37
Thursday, October 23, 2008
10:12 AM
radio stations are saved to Channel list. The first
preset radio station starts to play. Select your
desired station from Channel list. If necessary,
press RBack to go to the playback screen.
On the radio playback screen, press + to enable
the auto search function. The search icon lights
up. Press < or > to start the auto tuning to the
next available station.
• Manual tune:
Press LOptions > Manual Input to enter your
desired radio frequency;
On the radio playback screen, press + to disable
the search function. The search icon dims. Press
< or > repeatedly for fine tuning.
Or
1. Tune to your desired station (see "Tune to a
radio station").
2. On the radio playback screen, long press your
desired numeric key.
Current station is save to the location
(corresponding to the numeric key) in Channel
list.
3. To edit the channel name, press LOptions >
Channel list to select a channel. Press
LOptions > Edit to edit the channel name.
Edit the channel list
2.
You can assign a preset to a certain location. When
pressing the numeric key on the radio playback
screen, you tune to the station immediately.
1. In Music > FM radio, press LOptions >
Channel list to select a location for your preset
(Location 1 to 9 corresponding to numeric
keys 1 to 9).
2. Press LOptions > Edit:
Channel name: Name or rename the channel.
Frequency: Enter your desired frequency.
The old frequency in the location is replaced.
Music
Listen to a radio station
1.
3.
Go to Music > FM radio.
The last played station starts to play.
Tune to your desired station (see "Tune to a
radio station"). Or on the playback screen,
press a numeric key to select a preset station.
On the radio playback screen, press
LOptions > Settings to select your playback
settings.
Background play: Turn it on to play the radio
after exiting Music > FM radio. The station
information appears on the idle screen.
Loudspeaker: Turn it on to listen to the radio
through the speaker.
37
X710_En_Book.book
4.
5.
Page 38
Thursday, October 23, 2008
Channel effect: Select sound effects for your
radio.
On the radio playback screen or idle screen,
press - to stop or resume radio playback.
To return to the idle screen during playback,
press).
Record radio programs
You can record a radio program when listening to
it, or at a set time.
1. On the radio playback screen, press
LOptions > Settings to select recording
settings, including the format, quality, and
storage location.
2. Press RBack to return to the playback
screen. Press , to start, pause and resume
recording. Press R to stop recording.
3. To add recording to the end of an existing
audio file, press LOptions > Append on the
playback screen. Select the desired file to start
recording.
Record radio programs at set time
1. On the radio playback screen, press
LOptions > Schedule FM record.
2. Select your recording options, and turn on
Schedule FM record.
At the set time, the radio plays through the
38
10:12 AM
speaker and recording starts automatically.
During recording, all the other functions on
the phone are unavailable.
To make recording at set time, make sure that
your phone is turned on and in idle mode.
Sound recorder
You can make your own recording, and share it
with your friends via the MMS, E-mail, or
Bluetooth. Also, you can use the recording as the
ringtone for a contact.
Make recording
1.
2.
3.
4.
Go to Music > Sound recorder.
Press ,Record to start/pause recording.
Press RStop to stop recording.
Press LOptions > Save to save the
recording.
Edit or append recording to a file
1.
2.
Select the desired file.
Press LOptions to select your options.
Send an audio file
1.
2.
Select the desired file.
Press LOptions > Forward to send the audio
file via the MMS, E-mail, or Bluetooth.
Music
X710_En_Book.book
Page 39
Thursday, October 23, 2008
10:12 AM
To use the audio file as the ringtone for
a contact, select LOptions > Forward > To
profile (see "Add a contact to Smart
Phonebook" on page 24).
Music
39
X710_En_Book.book
Page 40
Thursday, October 23, 2008
11. My files
10:12 AM
Manage your files
Create sub-folders
On the phone, all the files are stored under the
folders of the phone memory or memory card.
Files stored in DRM rights have limitations on the
usage or access right. You cannot share these files
with the third party.
Find your files
1.
2.
3.
40
Go to My files.
Select Phone or Memory card, if you have install
a memory card on your phone.
Other: for files received via the MMS, E-mail or
Bluetooth.
Audio: for audio files, like sound recording,
radio recording, music files, ringtones, and
others
Picture: for photos, .jpg files and others
Video: for video files, and others
If necessary, press LOptions to select your
view settings:
Sort: Show files in the order of name, type,
time or size.
You can create sub-folders under the folders (like
Other, Audio, Picture, and Video) or an existing subfolder.
1. Select a folder or sub-folder under which you
wish to create a folder.
2. Press LOptions > Create folder.
3. In the Edit screen, enter a file name. If
necessary, press # repeatedly to select input
methods, and long press * to turn the T9
input on or off.
4. Press , > Done.
A sub-folder is created.
Manage your files
You can copy and move files within a folder, delete,
or rename your files.
1. Select a file under a folder.
2. Press LOptions to select your desired
option.
3. To copy or move a file, select the desired subfolder, and press
Done: Move or copy the file to current subfolder.
LOptions > Open: Open a sub-folder under
My files
X710_En_Book.book
Page 41
Thursday, October 23, 2008
10:12 AM
current sub-folder, and move or copy the file
to it.
LOptions > Create: Create a sub-folder
under current sub-folder, and move or copy
the file to it.
Share your files
You can share your files with others via the MMS,
E-mail, or Bluetooth. For photos and audio files,
you can also use them as contact pictures or
ringtones.
1. Select the desired file, and press LOptions >
Use.
2. Select the option to send the file via the MMS,
E-mail, or bluetooth.
If you send your files via the bluetooth, check
your Bluetooth connection first.
(see "Bluetooth" on page 41 )
To use the file as a contact picture or
ringtone,
press LOptions > Use > To profile (for more
information, see "Add a contact to Smart
Phonebook" on page 24).
My files
41
X710_En_Book.book
Page 42
Thursday, October 23, 2008
10:12 AM
12. Calls
You are provided with the records about your
incoming and outgoing calls.
Go to Calls to check your call history.
Depending on your network, rounding-off for
billing purposes, taxes etc, the actual time invoiced
for calls and services by your service provider may
vary.
The Call cost function is network-dependent.
42
Calls
X710_En_Book.book
Page 43
Thursday, October 23, 2008
13 • Bluetooth
About Bluetooth
Your phone supports Bluetooth wireless
technology, allowing connection to a compatible
Bluetooth device within 10 meters. The Bluetooth
connection can be subject to interference from
obstructions such as walls or other electronic
devices.
Before you can apply Bluetooth, make sure the
other device supports Bluetooth function by
contacting the device’s manufacturer or its
accompanied documentation.
10:12 AM
4.
To connect to a device you connected
previously,
1.
2.
2.
3.
Go to Bluetooth > Power. Press , if necessary,
to turn on the bluetooth function.
Select Find device to start searching for
available Bluetooth devices.
A list of available Bluetooth devices appears.
Select the device you wish to connect. Press
,.
Bluetooth
Go to Bluetooth > My device.
Select the device, and press ,.
The connection is made if the device is
available for a connection.
Get connected by a Bluetooth device
1.
Connect to a Bluetooth device
1.
Enter your Bluetooth password (0000 by
default) to start connecting.
The connection is made if your connection
request is accepted by the other device.
2.
Go to Bluetooth > Settings:
Visibility: Turn it on to make your phone
visible to other Bluetooth devices
My name: your phone name to be
identified by other Bluetooth devices.
Press , to edit it.
Go to Bluetooth > Power. Press , if necessary,
to turn on the bluetooth function.
The connection is made when you receive and
accept the connection request (enter the
password 0000 if necessary).
43
X710_En_Book.book
Page 44
Thursday, October 23, 2008
14. Profiles
Adjust ring settings to different scenes
The profiles are defined for several scenes. They
consist of the settings for ringtones, ring volume,
answer mode, and others. With preset profiles,
you can easily adjust incoming calls and messages as
desired.
10:12 AM
2.
Press ,Activate to activate the profile.
To activate the Meeting mode, long press #
on the idle screen.
If you select Flight mode, you disable the
connection between your phone and your
mobile phone network.
Define your profiles
This phone has provide you several preset profiles.
You can use the default settings or change them as
desired.
The settings for Flight mode (on a plane) and
Silent mode are unchangeable.
To change the settings:
1. In Profiles, select the profile to be changed.
Press LOptions.
2. Select the item to be changed. Press , to
select your desired options.
3. Repeat Step 2 until you finish the settings.
Apply a profile
1.
44
In Profiles, select the profile to be applied.
Profiles
X710_En_Book.book
Page 45
Thursday, October 23, 2008
10:12 AM
15. Settings
• Turn Active mode on or off to
select whether to receive calls
or messages from a SIM card.
Dual mode
SIM cards
Change your current settings of
SIM card slots:
Set Slot 1/ Slot 2
• Set the phone number and name
for your SIM cards;
• Select a ringtone and message
alert to help you identify from
which SIM card a call or message
comes;
The ringtones for your SIM cards
can be replaced by the ringtone
you select for a contact, if there
is an incoming call from such a
contact. See "Add a contact to
Smart Phonebook" on page 24
and "Group contacts on the
Smart Phonebook" on page 25.
Settings
Primary SIM
By default, the primary SIM card is
the one inserted on Slot 1. You use
the services available on the
primary SIM card by default.
• Press < or > to select Slot 1 or
Slot 2 as your primary SIM card.
Press , to confirm.
By default, different wallpaper
and theme have been set for the
primary SIM card. To change
the settings, select your desired
primary SIM card, and go to
Settings > General > Display.
Ask when
power on
Select whether to show the slot
setup screen each time you turn on
the phone.
45
X710_En_Book.book
Page 46
Thursday, October 23, 2008
General
Display
Time & date
Set the clock of the phone (see "Set
clock" on page 9 and "Display local
and international clocks" on page
9).
Auto update of date and time:
Update the time and date of your
phone according to the signals sent
by the network. (dependent on the
network).
Languages
Select a language for your phone.
46
10:12 AM
Wallpaper: Select an image as the
wall paper of your phone. You can
select either a default wallpaper or
one of your pictures stored in My
files.
Themes: Define the theme for your
phone.
Screen saver: Settings > Status: Turn
the screen saver on, off, or display
the time. Settings > Waiting: Set the
time span in idle mode before a
screen saver appears. Select: Select
an image as the screen saver.
Backlight level: Select the brightness
of backlight.
Backlight duration: Select the
duration of backlight.
Show date and time: Select whether
to show date and time on the idle
screen. To show time in a clock or
digits, see "Display local and
international clocks" on page 9.
Greeting text: Select whether to
show greetings when your phone is
turned on.
Settings
X710_En_Book.book
Page 47
Thursday, October 23, 2008
Speed dial
Call a contact by long pressing a
numeric key (see "Speed dial" on
page 13).
Fast keys
Set a navigation key as a direct
access to a menu (see "Fast keys"
on page 2).
Shortcuts
Direct access to functional submenus (see "Shortcuts" on page 2).
10:12 AM
Call divert
Divert incoming calls to your voice
mailbox or to another phone
number (regardless of whether or
not the number is in your
phonebook).
Line switching Swap phones when handling
multiple calls (see "Handle multiple
calls (network- dependent)" on
page 14).
Call options
Call time
reminder
Get reminded after the specified
call time span once or repeatedly.
Caller ID
Set how to show your number to
the
called
party
(networkdependent).
Call time
display
Display the call time on the screen.
Auto redial
Call waiting
Get informed of an incoming call
when on phone (networkdependent, see "Answer a second
call" on page 15).
Keep redialing the call number that
fails to go through.
IP number
(network -dependent, available only
in China): Add the preset IP
number to outgoing call numbers.
Blacklist
Blacklist mode: Turn the blacklist
mode on or off.
Blacklist number: Edit a list of phone
numbers. You can reject all the calls
from such numbers.
Call barring
Settings
Set limits to your incoming and
outgoing calls. Select Change barring
PW to change the call barring
password.
47
X710_En_Book.book
Page 48
Thursday, October 23, 2008
Network
Select
network
Select the network for your phone.
Preferred
network
Select your preferred network.
GPRS
connection
Select GPRS connection mode.
Security
48
Phone
lock
Set password protection for your
phone. You are required to enter the
password each time you turn on the
phone (0000 by default).
Auto
keypad
lock
Set an idle time span for the
keypad to be locked.
Automatic is recommended.
You can select a network other than your home
network only if it has a valid roaming
agreement with your home network. If you
change the network, some problems may arise
during the operation of your phone.
SIM lock
10:12 AM
Set PIN or PIN2 password protection
for your SIM card. (The PIN or PIN2
are provided by the network operator.
Fixed dial Restrict your outgoing calls to certain
numbers (PIN2 code required).
Barred
dial
Prohibit some outgoing calls (networkdependent).
Change Change your PIN, PIN2, phone
password passwords as desired.
If you enter an incorrect PIN code three times
in succession, the PIN code of your SIM card
will be locked automatically and you will be
prompted to enter the PUK code to unlock it.
You can obtain the PUK code from your
network operator. If you enter an incorrect
PUK code ten times in succession, the SIM card
will be locked permanently. When this
happens, please contact your network
operator or retailer.
Settings
X710_En_Book.book
Page 49
Thursday, October 23, 2008
10:12 AM
Restore factory settings
Restore your phone settings to the default values.
You need to enter your phone lock password to
restore settings.
Settings
49
X710_En_Book.book
Page 50
Thursday, October 23, 2008
Icons & symbols
In idle mode, several symbols can be displayed
simultaneously on the main screen.
If the network symbol is not displayed, the
network is currently not available. You may be
in a bad reception area; moving to a different
location may help.
Silent - Your phone will not ring when
receiving a call.
Battery - The bars indicate the battery
level (4 bars=full, 1 bar=low).
GSM Network - your phone is connected
to the GSM network.
Reception quality - the more bars are
shown the better the reception is.
Keypad lock - The keypad has been
locked.
Bluetooth - Feature is activated.
Alarm - The alarm clock has been
activated.
Ring - The phone will ring when there is
an incoming call.
50
10:12 AM
Vibration only - The phone will vibrate
when there is an incoming call.
Call forward - All your incoming voice
calls are being forwarded to a number.
Roaming - Displayed when your phone is
registered to a network other than your
own (especially when you’re abroad).
Home zone - A zone designated by your
network
operator.
Subscription
dependent, contact your service
provider for details.
GPRS attach - Your phone is connected
to the GPRS network.
SMS - You have received a new SMS
message.
SMS full - Memory for messages is full.
Delete old messages to receive new
ones.
Headset - The headset is plugged into the
phone.
Recording - Sound recording mode is
activated during a call.
Icons & symbols
X710_En_Book.book
Page 51
Thursday, October 23, 2008
Precautions
Radio Waves
Your cellular mobile phone is a low power
radio transmitter and receiver. When it
is operating, it sends and receives radio
waves. The radio waves carry your voice
or data signal to a base station that is connected to
the telephone network. The network controls the
power at which the phone transmits.
• Your phone transmits/receives radio waves in the
GSM frequency (900 / 1800 / 1900 MHz).
• The GSM network controls transmission power
(0.01 to 2 watts).
• Your phone complies with all relevant safety
standards.
• The CE mark on your phone shows compliancy
with European electromagnetic compatibility
(Ref. 89/336/EEC) and low voltage directives
(Ref. 73/23/EEC).
For body worn operation, this phone has been tested
and meets FCC RF exposure guidelines when used
with an accessory that contains no metal and that
positions the handset a minimum of 1.5cm from the
body. Use of other accessories may not ensure
compliance with FCC RF exposure guidelines.
10:12 AM
Warning: This device complies with Part 15 of the
FCC Rules. Operation is subject to the following
two conditions:
• This device may not cause harmful interference,
and
• This device must accept any interference
received, including interference that may cause
undesired operation.
Your cellular mobile phone is your responsibility.
To avoid damage to yourself, to others or to the phone
itself, read and follow all the safety instructions and
make them known to anyone borrowing your phone.
Furthermore to prevent unauthorised use of your
phone:
Keep your phone in a safe place and keep
it out of small children's reach.
Avoid writing down your PIN code. Try to
remember it instead.
Switch off the phone and remove the battery if you
are going to leave it unused for a long time.
Change your PIN code after purchasing the phone
and to activate call restriction options.
The design of your phone complies with
all applicable laws and regulations.
However your phone may cause
interference with other electronic devices.
51
X710_En_Book.book
Page 52
Thursday, October 23, 2008
Consequently you should follow all local
recommendations and regulations when using
your cellular phone both at home and when away.
Regulations on the use of cellular phones in
vehicles and aircraft are particularly stringent.
Public concern has been focused for some time on
the possible health risks for users of cellular phones.
The current research on radio wave technology,
including the GSM technology, has been reviewed
and safety standards have been drawn up to ensure
protection from exposure to radio wave energy.
Your cellular telephone complies with all
applicable safety standards and the Radio
Equipment and Telecommunications Terminal
Equipment Directive 1999/5/EC.
Always switch off your phone...
Inadequately protected or sensitive electronic
equipment may be affected by radio energy. This
interference can lead to accidents.
Before boarding an aircraft and/or when
packing the phone in your luggage: the use
of mobile phones in an aircraft may be
dangerous for the operation of the aircraft, disrupt
the mobile phones network and may be illegal.
52
10:12 AM
In hospitals, clinics, other health care
centres and anywhere else where you may
be in the close vicinity of medical
equipment.
In areas with a potentially explosive
atmosphere (e.g. petrol stations and also
areas where the air contains dust particles,
such as metal powders).
In a vehicle transporting flammable products (even
if the vehicle is parked) or a vehicle powered by
liquefied petroleum gas (LPG), check first that the
vehicle complies with the applicable safety rules.
In areas where you are requested to turn off radio
transmitting devices, such as quarries or other areas
where blasting operations are in progress.
Check with the vehicle manufacturer that
electronic equipment used in your
vehicle will not be affected by radio
energy.
Pacemakers
If you have a pacemaker:
• Always keep the phone more than 15 cm from
your pacemaker when the phone is switched on,
in order to avoid potential interference.
• Do not carry the phone in a breastpocket.
X710_En_Book.book
Page 53
Thursday, October 23, 2008
• Use the ear opposite to the pacemaker to
minimise the potential interference.
• Switch off your phone if you suspect that
interference is taking place.
Hearing aids
If you are a user of a hearing aid, consult your
physician and hearing aid manufacturer to learn
whether your particular device is susceptible to
cellular phone interference.
Improved performance
In order to improve the performance of your
phone, reduce radio energy emission, reduce
battery consumption and ensure safe operation
adhere to the following guidelines:
For the optimal and satisfactory operation
of the phone you are recommended to use
the phone in the normal operating position
(when not using in hands-free mode or
with a hands-free accessory).
• Do not expose your phone to extreme
temperatures.
• Treat the phone with care. Any misuse will void
the International Guarantee.
• Do not immerse the phone in any liquid; if your
phone is damp, switch it off, remove the battery
10:12 AM
and let them dry for 24hrs before using them
again.
• To clean the phone, wipe it with a soft cloth.
• Placing and receiving calls consumes the same
amount of battery energy. However, the mobile
consumes less energy in idle screen when kept in
the same place. When in idle screen and while you
are moving, your phone consumes energy to
transmit updated location information to the
network. Setting the backlight for a shorter period
of time as well as avoiding unnecessary navigating
in the menus will also help to save the battery’s
energy for longer phoning and stand-by
performances.
Battery information
•
•
•
•
•
Your phone is powered by a rechargeable battery.
Use specified charger only.
Do not incinerate.
Do not deform or open the battery.
Do not allow metal objects (such as keys in your
pocket) to short circuit the battery contacts.
• Avoid exposure to excessive heat (>60° C or
140° F), moisture or caustic environments.
53
X710_En_Book.book
Page 54
Thursday, October 23, 2008
You should only use Philips Authentic
battery and accessories, as the use of any
other accessories may damage your phone
and may be dangerous, and will make all
guarantees for your Philips phone null and
void. The use of an incorrect type of battery may
also cause an explosion.
Make sure damaged parts are replaced immediately
by a qualified technician and that they are replaced
with genuine Philips replacement parts.
Your mobile phone and your car
•
•
•
•
Studies have shown that speaking on the
telephone while driving lowers your
concentration, which can be dangerous.
Adhere to the following guidelines:
Give your full attention to driving. Pull off the
road and park before using the phone.
Respect the local regulations in countries where
you drive and use your GSM phone.
If you want to use your phone in a vehicle, install
the hands-free car kit which is designed for that
purpose.
Ensure that your phone and car kit do not block
any air bags or other security devices fitted in your
car.
54
10:12 AM
The use of an alarm system to operate a vehicle's
light or horn to indicate incoming phone calls is
prohibited on public roads in some countries. Check
local regulations.
EN 60950 Norm
In hot weather or after prolonged exposure to the
sun (e.g., behind a window or a windscreen), the
temperature of your phone's casing might increase,
especially when featuring a metallic finish. Be very
careful in this case when picking up your phone and
also avoid using it with an ambient temperature over
40° C or below 5° C.
For your phone, the socket-outlet shall be installed
near the phone and shall be accessible.
Environmental care
Remember to observe the local regulations
regarding the disposal of the packaging
materials, exhausted batteries and old
phone and please promote their recycling.
Philips has marked the battery and packaging with
standard symbols designed to promote the recycling
and appropriate disposal of your eventual waste.
X710_En_Book.book
Page 55
Thursday, October 23, 2008
The labelled packaging material is
recyclable.
A financial contribution has been made
to the associated national packaging
recovery and recycling system.
10:12 AM
Please act according to your local rules and do not
dispose of your old products with your normal
household waste. The correct disposal of your old
product will help prevent potential negative
consequences for the environment and human
health.
The plastic material is recyclable (also
identifies the type of plastic).
WEEE Marking in the DFU:
“Information to the Consumer”
Disposal of your old product
Your product is designed and manufactured with
high quality materials and components, which can
be recycled and reused.
When this crossed-out wheeled bin
symbol is attached to a product it means
the product is covered by the European
Directive 2002/96/EC
Please inform yourself about the local
separate collection system for electrical
and electronic products.
55
X710_En_Book.book
Page 56
Thursday, October 23, 2008
Troubleshooting
The phone does not switch on
Remove/reinstall the battery. Then charge the
phone until the battery icon stops scrolling. Unplug
the charger and try to switch on the phone.
Your phone doesn’t return to idle screen
Long press the hangup key or switch off the phone,
check that the SIM card and the battery are installed
correctly and switch it on again.
The network symbol is not displayed
The network connection is lost. Either you are in a
radio shadow (in a tunnel or between tall buildings)
or you are outside the network coverage area. Try
from another place, try to reconnect to the network
(especially when abroad), check that the antenna is in
place if your mobile phone has an external antenna,
or contact your network operator for assistance/
information.
The display doesn’t respond (or the
display responds slowly) to key presses
The display responds more slowly at very low
temperatures. This is normal and does not affect the
operation of the phone. Take the phone to a warmer
place and try again. In other cases, please contact
your phone supplier.
56
10:12 AM
Your battery seems to over heat
You might be using a charger that was not intended
for your phone. Make sure you always use the
Philips authentic accessory shipped with your
phone.
Your phone doesn’t display the phone
numbers of incoming calls
This feature is network and subscription dependent.
If the network doesn’t send the caller’s number, the
phone will display Call 1 or Withheld instead.
Contact your network operator for more
information.
You can’t send text messages
Some networks don’t allow message exchanges
with other networks. First check that you have
entered the number of your SMS centre, or contact
your operator for more information.
You can’t display pictures
A picture may not be accepted by your mobile
phone if it is too large, if its name is too long, or if
it doesn’t have the correct file format.
You have the feeling that you missed
some calls
Check your call divert options.
X710_En_Book.book
Page 57
Thursday, October 23, 2008
10:12 AM
The display shows INSERT SIM
Check that the SIM card has been inserted correctly.
If the problem remains, your SIM card may be
damaged. Contact your network operator.
When attempting to use a feature in the
menu, the mobile displays NOT
ALLOWED
Some features are network and subscription
dependent. They are only available, therefore, if the
network or your subscription supports them.
Contact your network operator for more
information.
Your phone is not charging
If your battery is completely flat, it might take a
while before the charging icon is displayed on the
screen.
57
X710_En_Book.book
Page 58
Thursday, October 23, 2008
Philips Authentic
Accessories
Some accessories, such as battery and charger, are
included as standard accessories in your mobile
phone package. Additional accessories may also be
provided or sold separately. Package contents may
therefore vary.
To maximise the performance of your Philips
mobile phone and not to void the warranty,
always purchase Philips Authentic Accessories
that are specially designed for use with your
phone. Philips Consumer Electronics cannot be
held liable for any damage due to use with nonauthorised accessories.
Charger
10:12 AM
5 or 10 seconds.
When using the supplied one-key headset, press
the key to answer a call, and long press the key to
end the call.
USB cable
The USB cable enables high speed communication
between your phone and your computer. You can
then manage the information stored in your phone
such as image, animation, photo, video and music.
You can also use the cable to connect your phone
to a Webcam or charge the battery (this charging
mode is compatible with most computers).
You can carry out the following operations:
Mass
Storage
Acts as a mass storage for your
mobile phone data on the computer
and recover the data saved in the
computer, upload and download
files, access the internal memory
and micro SD card (if present) and
the size of transfer is unlimited until
your memory is full.
Webcam
Acts as a webcam for your PC.
Charges your battery in any AC outlet. Small
enough to carry in a briefcase/handbag.
Headset
Your phone will activate headset mode
automatically when you plug in the headset. If you
select Auto in Profile > Headset > Answer mode, your
phone will automatically answer the incoming call in
58
X710_En_Book.book
COM port
Page 59
Thursday, October 23, 2008
Acts as a modem for your phone
and PC connnection. You can use
the software provided to edit your
mobile phone contacts, pictures and
melodies.
When the transfer is finished, please make sure
that you safely remove your device based on
the instruction of your computer.
10:12 AM
Press Continue Anyway repeatedly until the
installation resumes.
Connecting your Phone to the PC
1.
Check that the Phone Setup wizard starts. If
necessary, double click the PhilipsPhoneTools
icon.
2. Connect your phone to the PC as prompted.
3. On your phone, select COM port.
On the PC, select X710, and then Connect.
Data connect kit
PhilipsPhoneTools offers instant sychronization
between your phone and your computer, and
enables you to backup your mobile phone data and
recover the data saved in the computer, receive
SMS and edit your mobile phone contacts.
Installing PhilipsPhoneTools on your PC
1.
Insert the supplied PhilipsPhoneTools into the
CD drive.
2. Run the Setup.exe program.
3. Make selections as prompted, and installation
starts automatically.
During the installation, interruption may occur
when your PC system detects the new software.
59
X710_En_Book.book
Page 60
Thursday, October 23, 2008
Trademark Declaration
Tegic Euro. Pat.
App. 0842463
T9 ® is a trademark of Tegic
Communications Inc.
Bluetooth™ is a trademark
owned
by
telefonaktiebolaget L M
Ericsson,
Sweden
and
licensed to Philips.
JAVA is a trademark of Sun
Microsystems, Inc.
60
10:12 AM
PHILIPS and PHILIPS’ Shield
Emblem are registered
trademarks of Koninklijke
Philips Electronics N.V.
manufactured by Shenzhen
Sang Fei Consumer
Communications Co., Ltd.
under
license
from
Koninklijke
Philips Electronics N.V.
X710_En_Book.book
Page 61
Thursday, October 23, 2008
10:12 AM
Specific Absorption Rate Information
International standards
THIS MOBILE PHONE MEETS THE INTERNATIONAL RECOMMENDATIONS FOR EXPOSURE TO
RADIO WAVES
Your mobile phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the limits
for exposure to radio frequency (RF) energy defined by the international standards. These recommendations
have been established by the International Commission on Non-Ionizing Radiation Protection (ICNIRP) and,
the Institute of Electrical and Electronics Engineers (IEEE) that forecast a substantial safety margin for assuring
the protection of all persons, regardless of age and health.
The exposure recommendations for mobile phones use a measurement unit known as the Specific Absorption
Rate (SAR). The SAR limit recommended by the ICNIRP for the mobile phones used by the general public is
2.0W/kg averaged over ten grams of tissue and, is 1,6W/kg averaged over one gram of tissue by
IEEE Std 1528 for the head.
Tests for SAR have been conducted using recommended operating positions with the mobile phone
transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined
at the highest certified power level, the actual SAR levels of the mobile phone while operating are generally
below the maximum SAR value. This is because the phone is designed to operate at multiple power levels so
as to use only the power required to reach the network. In general, the closer you are to a base station
antenna, the lower the power output.
While there may be differences between the SAR levels of various phones and at various positions, they all
meet the international protection standards for exposure to radio waves.
The highest SAR value for this Philips X710 model phone when tested for compliance against the standard was
0.782W/kg for ICNIRP recommendation and 1.09 W/kg for IEEE Std 1528.
For limiting the radio waves exposure, it is recommended to reduce the mobile phone call duration or to use
a headset. The purpose of those precautions is to take the mobile phone away from the head and the body.
Specific Absorption Rate Information
61
X710_En_Book.book
Page 62
Thursday, October 23, 2008
Limited warranty
1. What Does This Limited Warranty Cover?
Philips warrants to the original retail purchaser
(“Consumer” or “You”) that this Philips cellular
product and all accessories originally provided by
Philips in the sales package (“Product”) are free
from defects in materials, design and workmanship
under normal use in accordance with the operating
instructions and pursuant to the following terms and
conditions. This limited warranty extends only to
the Consumer for Products purchased and used in
the original country of purchase. The limited
warranty is valid only in Philips’ intended country
of sales of the product.
2. How Long is The Limited Warranty Period?
The limited warranty period for the Product extends
for ONE (1) YEAR from the date of purchase of the
Product, documented by valid proof of purchase.
The limited warranty for original Philips
rechargeable battery extends for six (6) months
from the date of purchase.
62
10:12 AM
3. What Will Philips Do if The Product is Not Free
From Material Defects in Materials and
Workmanship During The Limited Warranty
Period?
During the limited warranty period, Philips or its
authorized service representative will, at its option
either repair or replace, without charge for parts or
labour, a materially defective Product with new or
refurbished parts or Product and return such
repaired or replaced Product to the Consumer in
working condition. Philips will retain defective
parts, modules or equipment.
Repaired or replaced Product will be covered by this
limited warranty for the balance of the original
limited warranty period or ninety (90) days from the
date of repair or replacement whichever is longer.
Repair or replacement of Product, at Philips’ option
is your exclusive remedy.
4. What is Not Covered By This Limited Warranty?
This limited warranty does not cover:
X710_En_Book.book
Page 63
Thursday, October 23, 2008
a) Product that has been subjected to misuse,
accident, shipping or other physical damage,
improper installation, abnormal operation handling,
neglect, inundation, fire, water or other liquid
intrusion; or
b) Product that has been damaged due to
repair, alteration, or modification by
anyone not authorized by Philips; or
c) Product that has reception or operation
problems caused by signal conditions,
network reliability or cable or antenna
systems; or
d) Product defects or problems caused by
uses with non-Philips products or
accessories; or
e) Product which warranty/quality stickers,
product serial number or electronic serial
number has been removed, altered or
rendered illegible; or
f) Product purchased, used, serviced, or
shipped for repair from outside the original
country of purchase, or used for
commercial or institutional purposes
(including but not limited to Products used
for rental purposes); or
g) Product returned without valid proof of
purchase or which proof of purchase has
been altered or is illegible.
h) Normal wear and tear or Force Majeure.
10:12 AM
5.
How Do You Get Warranty Service?
a)
Return the Product to an authorized service
center of Philips. You may contact the
local Philips office for the location of the
nearest authorized service center.
b) The SIM card must be removed from the
Product before it is given to Philips. Philips
assumes no liability for damaged or loss of
the SIM card or the data contained therein.
c) If the Product failure is not covered by this
limited warranty, or this limited warranty
is inapplicable, void or invalid due to any
terms and conditions stated herein, the
Consumer will be charged for the cost of
repair or replacement of the Product and all
other related cost incurred in repairing or
replacing the Product.
d) IMPORTANT - you are required to return
the Product together with a valid proof of
purchase which must identify the point of
purchase, date of purchase, Product model
and Product serial number clearly.
6. Other Limitation: This Warranty is The Entire
Agreement.
EXCEPT
FOR
THE
EXPRESS
WARRANTIES SET FORTH ABOVE AND
63
X710_En_Book.book
Page 64
Thursday, October 23, 2008
THOSE IMPLIED BY LAW AND WHICH
CANNOT BE EXCLUDED OR MODIFIED
BY AGREEMENT, PHILIPS PROVIDES NO
OTHER
WARRANTY
WHETHER
EXPRESS OR IMPLIED (WHETHER BY
STATUTE, UNDER THE OPERATION OF
LAW OR OTHERWISE) AND SPECIALLY
DISCLAIMS ANY WARRANTY OF
SATISFACTORY
QUALITY
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE.
PHILIPS’
TOTAL
LIABILITY
FOR
DAMAGES RELATING TO OR ARISING
OUT OF THE PURCHASE OR USE OF THE
PRODUCT, REGARDLESS OF THE TYPE
OR CAUSE OF SUCH DAMAGE OR THE
FORM OR CHARACTERISATION OF THE
CLAIM ASSERTED (E.G. CONTRACT OR
TOPIT), SHALL NOT EXCEED THE
ORIGINAL PURCHASE PRICE PAID FOR
THE PRODUCT.
HOWEVER IN NO EVENT SHALL PHILIPS
BE LIABLE FOR ANY PUNITIVE,
SPECIAL, INCIDENTAL, INDIRECT OR
CONSEQUENTIAL DAMAGES (INCLUDING
BUT NOT LIMITED TO THE LOSS OF USE,
LOSS OF TIME, INCONVENIENCE,
COMMERIAL LOSS, LOST PROFITS,
LOST BUSINESS OPPORTUNITIES, COST
64
10:12 AM
OF SUBSTITUTION OF GOODS OR
SERVICES, INVESTMENTS, DAMAGE TO
GOODWILL OR REPUTATION, OR LOSS
OF DATA AND CLAIMS BY THIRD
PARTIES) RESULTING FROM PURCHASE
OR USE OF THE PRODUCT, TO THE
FULLEST EXTENT ALLOWED BY LAW,
WHETHER OR NOT PHILIPS HAS BEEN
ADVISED OF THE POSSIBILTY OF SUCH
DAMAGES. THESE LIMITATIONS SHALL
APPLY
NOTWITHSTANDING
THE
FAILURE OF THE ESSENTIAL PURPOSE
OF ANY LIMITED REMEDY.
This limited warranty represents the complete
and exclusive agreement between the
Consumer and Philips with respect to this
cellular Product and it supercedes all prior
agreements between the parties, oral or written,
and all other communications between the
parties relating to the subject matter of this
limited warranty. No carrier, retailer, agent,
dealer, employee, thereof, or employee of
Philips is authorized to make modifications to
this limited warranty and you should not rely on
any such representation.
This limited warranty does not affect the
Consumer’s statutory rights under applicable
national laws in force.
X710_Couv.fm
Page 71
Monday, November 3, 2008
Declaration of
conformity
We,
Shenzhen Sang Fei Consumer
Communications Co., Ltd.
11 Science and Technology Road,
Shenzhen Hi-tech Industrial Park,
Nanshan District, Shenzhen 518057,
China.
declare under our sole responsibility that the
product
Philips X710
Cellular Mobile Radio GSM 900/1800/1900
TAC: 35604902
to which this declaration relates, is in conformity
with the following Standards:
SAFETY: EN 60950-1: 2001+A11:2004
HEALTH: EN50360: 2001;EN50361:
2001-7
EMC: ETSI EN 301 489 v 1.6.1; ETSI
EN301 489-7 v 1.2.1; ETSI EN 301 48917 v 1.2.1
5:09 PM
SPECTRUM: ETSI EN 301 511 v9.0.2;
ETSI EN 300 328 v1.7.1
We hereby declare that all essential radio test
suites have been carried out and that the above
named product is in conformity to all the essential
requirements of Directive 1999/5/EC.
The conformity assessment procedure referred to
in Article 10 and detailed in Annex V of Directive
1999/ 5/EC has been followed related to articles 3.1
and 3.2 with the involvement of the following Notified Body: CETECOM ICT Services GmbH, Unterturkhelmer Strabe6-10, 66117, Saarbrucken,
Germany.
Identification mark: 0682
August 4, 2008
Quality Manager

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 66
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:721d5681-77df-48de-912a-3b2d675f8a0c
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2008:10:23 10:15:33+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2008:11:03 17:17:51+08:00
Metadata Date                   : 2008:11:03 17:17:51+08:00
Document ID                     : uuid:69e6e715-0f66-492d-80d3-3f34612ad9d0
Format                          : application/pdf
Title                           : X710_En_Book.book
Creator                         : sf10257
Author                          : sf10257

EXIF Metadata provided by EXIF.tools