Sangean Electronics 023 Bluetooth Module User Manual

Sangean Electronics Inc Bluetooth Module

User Manual

Product Specification Spec-BM153-CB1-V2.0 Page 1 of 3 www.sunitec.com.tw ® Features: • Bluetooth Spec. V2.1+EDR Compliant • Class 2 type Output Power • Support Firmware Upgrade • Integrated LED Driver • Built in 16-bit Stereo Codec- 95dB SNR for DAC • Size: 54mm x 33.1 mm x 8.2mm • Weight: 6g System Architecture BM153-CB1 Class 2 Multimedia Module CSR, BC57E687C Dec 2011 Product Description: The BM153-CB1 is a Class 2 Bluetooth sub-system using BlueCore5-Multimedia External chipset from leading Bluetooth chipset supplier Cambridge Silicon Radio. BM153-CB1 interfaces to 8Mbit of external Flash memory When used with the CSR Bluetooth software stack, it provides a fully compliant Bluetooth system to v2.1+EDR of the specification for data and voice communications The module and device firmware is fully compliant with the Bluetooth specification v2.1+EDR Applications: • Stereo Headset • Wireless Speakers Specifications: Operating Frequency Band 2.4GHz ~ 2.48GHz unlicensed ISM band Bluetooth Specification V2.1+EDR Output Power Class Class 2 Operating Voltage 5V Audio Interface Analog Flash Memory Size 8M Dimension 54mm x 33.1 mm x 8.2mm Specifications are subject to change without prior notice Qualified
Product Specification Spec-BM153-CB1-V2.0 Page 2 of 3 www.sunitec.com.tw ® Electrical Characteristics Absolute Maximum Rating Min Max Storage Temperature -40°C +85°C Supply Voltage -0.30V +6.5V Recommended Operating Conditions Min Max Operating Temperature Range -20°C +70°C Supply Voltage 4.5V 5.5V Power Consumption Units Average SCO Connection HV3 (30ms interval sniff mode) mA 21 SCO Connection HV1 mA 40 ACL Data Transfer 115.2Kbps UART no traffic (Master) mA 4.4 ACL Data Transfer 115.2Kbps UART no traffic (Slave) mA 15 VCC = 5V; f = 2.441GHz; T=20°C RF Characteristics Receiver Units Min Typ Max Bluetooth Spec Sensitivity at 0.1% BER dBm - -90 -86 ≤-70 Maximum Receiver Signal dBm -20 -10 - ≥ -20 C/I Co-Channel dB - 6 11 ≤11 Adjacent Channel Selectivity C/I -1MHz dB - -6 0 ≤0 2nd Adjacent Channel Selectivity C/I -2MHz dB - -38 -30 ≤-30 3rd Adjacent Channel Selectivity C/I -3MHz dB - -45 -40 ≤-40 Image Rejection C/I dB - -16 -9 ≤-9 VCC = 5V; f = 2.441GHz; T=20°C Transmitter Units Min Typ Max Bluetooth Spec RF Output Power dBm 0 3 - -6 to +4 RF Power Control Range dB 16 24 - > 16 RF Power Range Control Resolution dB - 0.5 - - 20dB Bandwidth for Modulated Carrier KHz - 940 1000 <1000 2nd Adjacent Channel Power (+/- 2MHz) dBm - -36 -20 ≤-20 3rd Adjacent Channel Power (+/- 3MHz) dBm - -45 -40 ≤-40 VCC = 5V; f = 2.441GHz; T=20°C All specifications including pinouts and electrical specifications may be changed without prior notice Pin Configurations PIN NO. NAME TYPE FUNCTION RE-MARK 1 Audio_L Analogue Speaker output, left 2 Audio_R Analogue Speaker output, right 3 AGND GND Analogue Ground 4 LED Open drain output LED Driver 5 PIO Bi-directional Programmable Input/Output Line 6 GND GND Ground 7 5V Power +5V Supply 8 GND GND Ground 9 UART_RX CMOS Input UART Data Input (Active High) 10 UART_TX CMOS Output UART Data Output (Active High)
Product Specification Spec-BM153-CB1-V2.0 Page 3 of 3 www.sunitec.com.tw ® Ordering Information No Items Ordering Code (Class 2) Description 1 i-Golf i-Golf 8M Flash Operating Voltage is DC5V, without CVC2 3 4 i-Golf Document History Revision Date History Draft V1.0 2011-9-15 Draft V2.0 2011-12-3 Contact Information Sunitec Enterprise Co., Ltd. Head Office: 3F.,No.98-1,Mincyuan Rd Sindian City, Taipei County 231,Taiwan Tel: 886-2-82191696 Fax: 886-2-82191676 http://www.sunitec.com.tw China Factory: No.2,Qilin Road 2,Run Tang Ind., Dan-Keng Village Fu Ming Community, Guan-lan Town, BaoAn District, Shenzhen GuangDong China Tel: 86-755-28016180 Fax: 86-755-28016097 E-mail: sales@sunitec-cn.com or project@sunitec-cn.com Http://www.sunitec-cn.com
Notice: The user should not modify or change this equipment without written approval form SANGEAN ELECTRONICS INC. Modification could void authority to use this equipment. Label for end product must include “Contains FCC ID: BYG023” or “A RF transmitter inside, FCC ID: BYG023”. FCC ID Label Graph: FCC ID: BYG023 Model: BM153-CB1-SJ This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: If the product is too small to make so many text labels, only need to indicate the FCC ID number on the label, but the above text will be printed in the manual or packaging box. IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. No change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device. The module has been regulatory approved for integrations which meet the following conditions: 1. The radio integration is embedded 2. The antenna must be installed such that 20 cm is maintained between the antenna and users 3. The ‘Type’ and ‘Gain’ of the antenna selected for the integration of the external antenna must meet the requirements as detailed in section. Used outside of these conditions will trigger re-approval.

Navigation menu