Sangean Electronics WR12BT FM STEREO/AM/AUX-IN/BLUETOOTH RECEIVER User Manual

Sangean Electronics Inc FM STEREO/AM/AUX-IN/BLUETOOTH RECEIVER

User Manual

WR-12BT3A81V30S2000AOperating instructionMode d’emploiInstruccions de manejoGebruiksaanwijzingBedienungsanleitungGBFENLDFM STEREO / AM / AUX IN / BLUETOOTH RECEIVERRECEPTEUR / FM STEREO / AM / AUX IN / BLUETOOTHRECEPTOR FM ESTÉREO / AM / AUX IN / BLUETOOTHFM STEREO / AM / AUX IN / BLUETOOTH ONTVANGERUKW-STEREO / MW / AUX / BLUETOOTH-EMPFÄNGER
1GBRead these instructions.Keep these instructions.Heed all warnings.Follow all instructions.Do not use this apparatus near water.Clean only with dry cloth.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. IMPORTANT SAFETY INSTRUCTIONS1.2.3.4.5.6.7.8.9.10.
2Only use attachments/accessories specied by the manufacturer.Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged. liquid has beenspilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.To Reduce the Risk of Fire or Electric Shock, Do not Expose This Appliance To Rain or Moisture.The Shock Hazard Marking and Associated Graphical Symbol is provided on the bottom panel of unit.11.12.13.14.15.16.
3GBApparatus shall not be exposed to dripping or splashing and no objects lled with liquids, shall not be placed on the apparatus.Excessive sound pressure on ear- and headphones could impair the hearing ability. Higher setting that idle on the equalizer leads to higher signal voltages on the output for ear and headphones.The power plug should be close to the radio, and easy to be approached that during the emergency, to disconnect the power from the radio, just unplug the power plug from the AC power slot.Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnected device shall remain readily operable.17.18.19.20.
4
5GB ControlsPower buttonBand selecting rotaryDial scaleDial indicatorDial markerVolume controlTreble controlBass controlSpeakerTuning LED indicator Tuning controlF-type external antenna terminalAM external antenna terminalSubwoofer speakerAC main power switchAC power cord socketDimmer controlHeadphone socketAUX IN socketExternal / internal antenna switch2315720191817161514131211109468
6 Power your radioAC operationBefore you plug the AC cord into the radio, make sure the AC voltage is correct. Insert the plug on the end of the supplied power cord into the AC power socket on the back of the radio.Power-onTurn on the main power switch and the power button simultaneously.Power-offTurn off the main power switch and the power button simultaneously. Antenna setup for FM receptionThe radio comes with built-in AM/FM antenna and external antenna.To use FM internal antenna, make sure to switch FM external/ internal antenna switch in the back of your radio to internal antenna position (i.e. INT. FM ANTENNA). As for external antenna, you can use to improve FM reception. Two types of antenna can be used. You can use the supplied FM wire antenna into the F-type antenna terminal and adjust the wire for best reception.You can also connect a 75 ohm coaxial cable of outdoor antenna to the terminal. Make sure to switch external/internal antenna switch to external position while using the supplied wire antenna or connecting the outdoor antenna. In some of the European countries, you may have to connect the supplied antenna terminal adaptor to connect with the outdoor antenna.
7GB Operating your radio FM1. Make sure you have set up the FM antenna in advance and turn on the main power switch in the rear of the unit.2. Rotate the band selecting rotary to the FM (MONO) or ST(FM stereo). Note: If the FM radio station being listened to has a weak signal, some hiss may be audible. It is possible to reduce this hiss by forcing the radio to play the station in mono rather than stereo. 3. Rotate the Tuning Control to select the desired station. In FM mode, the tuning scale is marked in MHz (Megahertz). The tuning LED indicator will appear brightest when best tuning has been achieved. In ST mode, the ST tuning LED indicator will illuminate when a stereo station is tuned.4. Adjust the Volume Control for comfortable listening.5. Press the power button and the main power switch to turn off the radio. Antenna setup for AM receptionThe radio comes with built-in AM antenna which should be enough for normal listening. To improve the AM reception, you may connect the outdoor AM antenna with AM external antenna terminal.
8 Operating your radio AM1. Rotate the Tuning Control to select the desired station. In AM mode, the tuning scale is marked in kHz (Kilohertz). The tuning LED will appear brightest when best tuning has been achieved.2. Rotate your radio for best reception.3. Adjust the Volume Control for comfortable listening.4. Press the power button and the main power switch to turn offt he radio. Dial markerThis device allows you to mark 3 of your favorite station frequency, so that you can find the particular station immediately next time when tuning the stations. Headphone useHeadphone use with this radio should be tted with a 3.5 mm jack plug. Insert the headphones plug into the socket marked on the rear side of the radio. When the headphones are plugged in, theloudspeaker is automatically disconnected.Important: Excessive sound pressure from earphones and headphones can cause hearing loss.
9GB AUX IN socketConnect a stereo or mono audio source (like CD walkman, iPod or digital media music player) to this input to listen the audio program via the speaker. Dimmer controlThe brightness of the dial scale may be adjusted. If you use the unit in the bedroom, you may prefer a higher brightness level than the standard setting. Treble / Bass controlThe sound on your radio can be adjusted to suit your personal taste for the material that you are listening to. You can set the treble and bass levels to your own preferences.Note: To adjust the volume without interference, you can press down the treble and bass button. It will not change your treble/ bass setting.
10 Listening to Bluetooth musicYou need to pair your Bluetooth device with your radio before you can auto-link to play/stream Bluetooth music through your WR-12BT. Paring creates a permanent `bond' so two devices can always recognize each other. Pairing your Bluetooth device1. Rotate the Band selecting rotary to select Bluetooth function. The Bluetooth icon on the panel will ash within 3 second. 2. Activate Bluetooth on your device according to the device's user manual to link to your WR-12BT. With some mobile, you may need to input the pass code “0000”. 3. Once connected, the Bluetooth icon will remain illuminated. You can now play the music in your Bluetooth-enabled device via WR-12BT. Note: If there are 2 Bluetooth devices searching for WR-12BT, it will show its availability on both devices. However, if one device links with the WR-12BT rst, then the other Bluetooth device won't nd the WR-12BT on its list.
11GBNote: If your Bluetooth-enabled device is temporarily disconnected to your WR-12BT. As long as the disconnection last within 7 minutes, your device can re-connect with your radio again automatically. If the disconnection last more than 7 minutes, then you need to manually reconnect your device again to the radio. Be aware that during the period of disconnection, no other Bluetooth device can pair or link with your radio. Disconnecting your Bluetooth deviceRotate the Band selecting rotary to any bands other than Bluetooth band or disconnect the Bluetooth-enabled device. The LED light for Bluetooth icon will then start to ash indicating deactivation of Bluetooth.
12 Specications AC Power: AC 120 V/60 Hz/50W (max) (US version)AC 230 V/50 Hz/50W (max) (European version)Frequency Coverage:FM 87.50 - 108 MHzAM 520 - 1710 kHzAUX-IN: 3.5mm diameter, stereoInternal Antenna System:AM Built-in ferrite aerialFM Built-in wiring aerialExternal antenna terminal:AM antenna terminal FM F-type antenna terminalOutput Power:3W+3W stereo amplier (1 kHz) 10W subwoofer amplier (100Hz)
13GBIf at any time in the future you should need to dispose of this product please note that: Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. (Waste Electrical and Electronic Equipment Directive)The company reserves the right to amend the specication without notice.Speaker:Stereo: 2.25inches 8 ohm x 2Subwoofer: 3.5inches 8 ohm x 1Headphones socket:3.5 mm dia. Stereo jack Stereo outputOutput power: 3mW + 3mW (impedance 32ohm)
For Unit ed States: Cautions to the user The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. RF exposure statements IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm (8 inches) from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. No change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guaranty that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna. ● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio / TV technician for help.

Navigation menu