Sangean Electronics XRM04 FM/AM radio with Bluetooth User Manual
Sangean Electronics Inc FM/AM radio with Bluetooth
User Manual
Job Site Radio Instruction manual Radio de chantier Manuel d’instructions LS Radio de Trabajo Manual de instrucciones GB XRM04 IMPORTANT: Read Before Using. IMPORTANT : Lisez les instructions avant l’utilisation. IMPORTANTE: Leer antes de usar. 2 (19) 14 12 13 2 3 4 5 11 10 (20) 15 (21) (22) 17 18 18 16 18 18 (23) (24) 14 16 26 25 26 25 25 25 13 27 28 10 10 ENGLISH (Original instructions) IMPORTANT SAFETY INSTRUCTIONS WARNING: When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury, including the following: 1. Read this instruction manual and the charger instruction manual carefully before use. 2. Clean only with dry cloth. 3. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 4. Only use attachments/accessories specified by the manufacturer. 5. Unplug this apparatus during lighting storms or when unused for long periods of time. 6. A battery operated radio with integral batteries or a separate battery pack must be recharged only with the specified charger for the battery. A charger that may be suitable for one type of battery may create a risk of fire when used with another battery. 7. Use battery operated radio only with specifically designated battery packs. Use of any other batteries may create a risk of fire. 8. When battery pack is not in use, keep it away from other metal objects like: paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns, or a fire. 9. Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded. 10. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. SAVE THESE INSTRUCTIONS. SPECIFIC SAFETY RULES FOR BATTERY CARTRIDGE 1. Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. 2. Do not disassemble battery cartridge. 3. If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion. 4. If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss of your eyesight. 5. Do not short the battery cartridge: Do not touch the terminals with any conductive material. (2) Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc. (3) Do not expose battery cartridge to water or rain. A battery short can cause a large current flow, overheating, possible burns and even a breakdown. 6. Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50°C (122°F). 7. Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire. 8. Be careful not to drop or strike battery. 9. Do not use a damaged battery. 10. The contained lithium-ion-batteries are subject to the Dangerous Goods Legislation requirements. For commercial transports e.g. by third parties, forwarding agents, special requirement on packaging and labeling must be observed. For preparation of the item being shipped, consulting an expert for hazardous material is required. Please also observe possibly more detailed national regulations. Tape or mask off open contacts and pack up the battery in such a manner that it cannot move around in the packaging. 11. Follow your local regulations relating to disposal of battery. (1) SAVE THESE INSTRUCTIONS. CAUTION: Only use genuine Makita batteries. Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger. Tips for maintaining maximum battery life 1. Charge the battery cartridge before completely discharged. Always stop tool operation and charge the battery cartridge when you notice less tool power. 2. Never recharge a fully charged battery cartridge. Overcharging shortens the battery service life. 3. Charge the battery cartridge with room temperature at 10°C - 40°C (50°F - 104°F). Let a hot battery cartridge cool down before charging it. 4. Charge the battery cartridge if you do not use it for a long period (more than six months). For United States: Cautions to the user The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. RF exposure statements IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. No change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Explanation of general view (Fig. 1) 1. 2. 3. 4. 5. 6. USB power supply port Power/Sleep timer Source button Radio alarm Buzzer alarm Preset stations/Preset 1 button as Bluetooth® pair button 7. Menu/Info button 8. Volume/Tuning control/Select knob 9. DC IN socket 10. AUX IN 1 11. LCD display 12. Handle 13. Soft bended rod antenna 14. Battery compartment locker 15. Speaker 16. Battery cover 17. Input terminal (AUX IN 2) 18. Battery compartment (covering main battery pack and back up batteries) 19. Up 20. Left 21. Front 22. Right 23. Back; Battery cover closed 24. Back; Battery cover opened 25. Battery cartridge 26. Button 27. Indicator lamps 28. Check button LCD display: A. B. C. D. E. F. G. H. I. Radio alarm Buzzer alarm Stereo symbol Low battery indicator Clock Frequency RDS (Radio data system) Sleep status AM/PM for clock Battery Installation Note: Keeping back up batteries inside the compartment prevent stored data in preset memories from being lost. 1. Pull out the battery compartment locker to release battery compartment. There are main battery pack compartment and back up battery compartment. (Fig. 2) 2. Remove back up battery compartment cover and insert 2 fresh UM-3 (AA sizes). Make sure the batteries are with correct polarity as shown inside the compartment. Replace the battery cover. (Fig. 3) 3. After back up batteries are inserted, insert the main battery pack to power radio. The suitable battery packs for this radio listed as the following table. The following table indicates the operating time on a single charge in Radio mode. 7.2 V 1.0 Ah AT SPEAKER OUTPUT = 50 mW + 50 mW unit Hour (APPROX.) Battery Cartridge Voltage Battery capacity 10.8 V 14.4 V 18 V BL7010 Radio/AUX BT + USB 5.5 0.8 BL1411G 1.5 L1451 1.1 Ah BL1811G 5.5 1.8 L1851 BL1014 1.5 BL1415 1.8 BL1413G 1.3 Ah 7.5 L1453 BL1815 BL1813G 2.0 L1853 BL0715 1.5 Ah 7.5 BL1415N BL1815N BL1820 2.0 Ah BL1820B 8.5 11 1.0 2.0 2.5 3.2 BL1430 4.0 BL1430B 3.0 Ah 16 BL1830 5.0 BL1830B BL1840 4.0 Ah 22 6.5 27 8.0 BL1840B BL1850 5.0 Ah BL1850B 6.0 Ah BL1460B BL1860B 33 7.0 9.5 : Cluster Battery : Slide Battery Note: Table regarding to the battery operating time above is for reference. The actual operating time may differ with the type of the battery, charging condition, or usage environment. Installing or removing Slide battery cartridge (Fig. 4 & 5) • To install the battery cartridge, align the tongue on the battery cartridge with the groove in the housing and slip it into place. Always insert it all the way until it locks in place with a little click. • If you can see the red indicator on the upper side of the button, it is not locked completely. Install it fully until the red indicator cannot be seen. If not, it may accidentally fall out of the tool, causing injury to you or someone around you. • Do not use force when inserting the battery cartridge. If the cartridge does not slide in easily, it is not being inserted correctly. • To remove the battery cartridge, withdraw it from the tool while sliding the button on the front of the cartridge or pressing the buttons on both sides of the cartridge. Installing or removing Cluster battery cartridge (Fig. 6 & 7) Using the soft bended rod antenna (Fig. 9) • To insert the battery cartridge, align the tongue on the Straight up the soft bended rod antenna as shown in the battery cartridge with the grove in the housing and slip figure. it into place. • To remove the battery cartridge, take the battery out of the terminal while pressing the buttons on the side of cartridge. Return the battery compartment locker to the original position. Reduced power, distortion, “stuttering sound” or when both low battery sign and “POWERFAIL” appear on the display are all the signs that the main battery pack needs to replace. Note: The battery pack can’t be charged via the supplied AC power adaptor. When low battery sign appears and an “EMPTY” keeps on flashing is the time to replace the back up batteries. Indicating the remaining battery capacity (Only for battery cartridges with “B” at the end of the model number.) (Fig. 8) Press the check button on the battery cartridge to indicate the remaining battery capacity. The indicator lamps light up for few seconds. Indicator lamps Off Remove the rubber protector and insert the adaptor plug into the DC socket on the left side of the radio. Plug the adaptor into a standard mains socket outlet. Whenever the adaptor is used, the battery pack is automatically disconnected. The AC adaptor should be disconnected from the main supply when not in use. Note: When your radio has any interference in AM band by its adaptor, please move your radio away from its AC adaptor over 30 cm. Operating your radio – Scan tuning AM/ FM 1. Press the Power button to switch on your radio. 2. Press the Source button to select AM or FM radio mode. 3. Press and hold the Tuning control knob to carry out an auto-tune. Your radio will scan up the AM/FM band from the currently displayed frequency and will stop scanning automatically when it finds a station of sufficient strength. 4. After a few seconds the display will update. The Remaining capacity Lighted Using Supplied AC power adaptor (Fig. 10) Blinking display will show the frequency of the signal found. 5. To find other station, press and hold the Tuning control knob 75% to 100% as before. 6. When the end of the waveband is reached your radio will recommence tuning from the opposite end of the 50% to 75% 25% to 50% waveband. 7. Rotate the Tuning control knob to adjust the sound level as required. 0% to 25% Charge the battery. Note: • While adjusting the volume, make sure the FM/AM is NOT flashing on the screen. • If AM/FM is flashing on the screen, it allows you to The battery may have malfunctioned. tune the stations manually (see the section of “Manual tuning – AM/ FM” for more detail). 8. To switch off your radio press the Power button 015658 Manual tuning – AM/FM NOTE: • Depending on the conditions of use and the ambient temperature, the indication may differ slightly from the actual capacity. 1. Press the Power button to switch on your radio. 2. Press the Source button to select AM or FM radio mode. 3. Press the Tuning control knob and you will see the FM or AM is flashing on the display. Note: • FM/AM will flash approx. 10 seconds. Within this period, only manual tuning is allowed. • If volume adjustment is desired while FM/AM is flashing, press the Tuning control knob to stop the flash and you can rotate the Tuning control knob to adjust sound level. 1. Press the Power button as needed to select the FM band and tune to the desired FM station as previously stated. 2. Press and hold Menu/Info button 3. Rotate the Tuning control knob 4. Rotate the Tuning control knob to tune to a station. 5. When the end of the waveband is reached your radio to enter the menu setting. until the FM Auto/ mono setting shows on the display. If the setting is Auto press the Tuning control knob to switch to Mono will recommence tuning from the opposite end of the mode to reduce the hiss. Press the Tuning control waveband. knob to select the option. 6. Use the Tuning control knob to adjust the sound Recalling a preset in AM/FM mode level as required. Presetting stations in AM/FM mode There are 5 preset stations each for AM and FM radio. They are used in the same way for each waveband. 1. Press the Power button to switch on your radio. 2. Press the Source button to select the desired 1. Press the Power button to switch on your radio. 2. Press the Source button to select AM or FM radio mode. 3. Momentarily press the required Preset button to cause your radio to tune to one of the stations stored in the preset memory. waveband. Tune to the required radio station as previously described. 3. Press and hold the required Preset button (1 to 5) until the display shows “P4” for Setting the time and date format The clock display used in stand-by mode and on the example after the frequency. The station will be stored playing mode screens can be set to different format. The using the preset number. Repeat this procedure for selected format is then also used when setting the alarms. the remaining presets as you wish. 1. Press and hold the Menu/Info button 4. Preset stations which have already been stored may be overwritten by following the above procedure if required. Your radio has a range of display options for FM radio mode. 1. Repeatedly press the Menu/Info button to view the RDS information of the station you are listening to. a. Station name b. Program type c. Radio text d. Year/Day e. Date/Day Frequency to enter the menu setting. 2. Rotate the Tuning control knob until “CLOCK xxH” appears on the display and press the Tuning control Display modes – FM f. Clock and Alarms Displays the name if the station being listened to. Displays the type of station being listened to such as Pop, Classic, News, etc. Displays radio text message such as new items etc. Displays the year and day of the week according to the date setting of your radio. Displays the date and day of the week according to the date setting of your radio. Displays the frequency of the FM for the station listened to. knob to enter the setting. You will see the time format begins to flash. 3. Rotate the Tuning control knob If the FM radio station being listened to has a weak signal some hiss may be audible. It is possible to reduce this to confirm your choice of clock format. Note: If the 12 hour clock format is chosen, the radio will then use the 12 hour clock for the setting. 4. Press and hold the Menu/Info button to enter the menu setting. 5. Rotate the Tuning control knob until a date (e.g. THU APR 3) appears on the display and press the Tuning control knob to enter the setting. You will see the date format begins to flash. 6. Rotate the Tuning control knob to select the desired date format. Press the Tuning control knob to confirm your choice. Setting the clock time and date 1. Press and hold the Menu/Info button 2. Rotate the Tuning control knob FM stereo (auto)/mono to select either 12 or 24 hour format. Press the Tuning control knob until “CLOCK ADJ” appears on the display. Press the Tuning control knob to enter the setting. 3. The hour setting on the display will begin flashing. hiss by forcing the radio to play the station in mono rather Rotate the Tuning control knob than stereo. desired hour, and press the Tuning control knob to select the to confirm the setting. Then rotate the Tuning control ONCE – the alarm will sound once knob DAILY – the alarm will sound everyday to select the desired minute, and press the Tuning control knob WEEKDAY – the alarm will sound only on weekdays to confirm the setting. 4. Rotate the Tuning control knob until “DATE ADJ” appears on the display. Press the Tuning control knob 5. Rotate the Tuning control knob to confirm the setting. Then rotate the Tuning control to select the desired month, and press the to confirm the setting. Then rotate the Tuning control knob to select the desired date and press the Tuning control knob to confirm the setting. When you set the clock time using the RDS function, your radio will synchronize its clock time whenever it tunes to a radio station using RDS with CT signals. 1. When tuning to a station transmitting RDS data, press and hold the Menu/Info button 2. Rotate the Tuning control knob until “RDS CT” and a clock symbol appear on the display. Press the to enter the setting. 3. Rotate the Tuning control knob control knob to select desired wake-up band and station, then press Tuning control knob to confirm the selection. 6. Rotate Tuning control knob to select the desired volume and press Tuning control knob to confirm the volume. Radio alarm setting is now completed. Note: If new radio alarm station is not selected, it will select the last alarm station. Radio Data System (RDS) Tuning control knob to confirm the 5. During radio alarm symbol is flashing, rotate Tuning to select the desired year and press the Tuning control knob Tuning control knob Press the Tuning control knob setting. to enter the setting. knob WEEKEND – the alarm will sound only at weekends until “RDS CT” appears on the display. Press the Tuning control knob to confirm the setting. The clock time of the radio will set up automatically according to the RDS data received. 4. When the action is completed, the RDS icon will appear on the LCD display indicating the radio time is RDS clock time. The radio clock time will be valid for 5 days each time the radio time is synchronized with RDS CT. Note: If the selected AM/FM alarm station is not available when the alarm is sounding, the buzzer alarm will be used instead. b. Setting HWS (Humane Wake System) buzzer alarm: A beep tone will activate when selecting the HWS buzzer alarm. The alarm beep will sound shorter every 15 seconds for one minute followed by one minute silence before repeating the cycle. 1. The buzzer alarm can be set either when the radio is on or off. 2. Press and hold the buzzer alarm button , the symbol and the display hour will flash along with a beep. 3. During buzzer alarm symbol flashes, rotate Tuning control knob to select the hour and press Tuning control knob again to confirm hour setting. Then rotate the Tuning control knob to select the minute and press Tuning control knob Setting the alarm clock Your radio has two alarms which can each be set to wake you to AM/FM radio or buzzer alarm. The alarms may be set while the unit is in standby mode or while playing. to confirm minute setting. 4. Rotate the Tuning control knob and the display will show the frequency options for the alarm. The alarm options are as follows: a. Setting radio alarm time: 1. The radio can be set either when radio is on or off. 2. Press and hold the radio alarm button , the DAILY – the alarm will sound everyday radio alarm symbol and the display hour will flash WEEKDAY – the alarm will sound only on weekdays along with a beep. WEEKEND – the alarm will sound only at weekends 3. During radio alarm symbol flashes, rotate Tuning control knob to select the hour and press Tuning control knob again to confirm hour setting. Then rotate the Tuning control knob to select the minute and press Tuning control knob to confirm minute setting. 4. Rotate the Tuning control knob and the display will show the frequency options for the alarm. The alarm options are as follows: 10 ONCE – the alarm will sound once Press the Tuning control knob to confirm the setting. Note: There is no volume adjustment for buzzer alarm. When the alarm sounds To cancel a sounding alarm, press the Power button Disabling/cancelling alarms 4. To turn off the loudness function, select OFF and To disable an active alarm, either press the Power button , or press and hold the corresponding alarm button press the Tuning control knob to confirm the setting. to cancel the alarm. Auxiliary input socket Snooze Two 3.5 mm stereo Auxiliary Input sockets are provided. 1. When the alarm sounds, press any button other than the Power button will silence the alarm for 5 minutes. “SNOOZE” will appear on the display. 2. To adjust the silence time for the snooze timer, press and hold the Menu/Info button to enter the menu One is at the front of your radio (AUX IN 1); the other is located in the battery compartment (AUX IN 2). 1. Connect an external audio source (for example, iPod, MP3 or CD player) to the Auxiliary Input socket. 2. Repeatedly press and release the Source button until AUX IN 1or 2 is displayed. setting. 3. Rotate the Tuning control knob until “SNOOZE X” 3. Adjust the volume setting on your iPod, MP3 or CD appears on the display, then press the Tuning control player to ensure an adequate signal level from the knob to enter the setting. Rotate the Tuning control player, and then use the Tuning control knob knob to adjust the silence time from 5, 10, 15 and radio as needed for comfortable listening. on the 20 minutes for the snooze timer. 4. To cancel the snooze timer while the alarm is suspended, press the Power button Sleep timer Your radio can be set to turn off automatically after a preset time has elapsed. The Sleep Timer setting can be adjusted between 60, 45, 30, 15, 120 and 90 minutes. 1. Press and hold the Power button to enter the Sleep Timer setting. “SLEEP XX” will show on the display. and the Sleep Timer options will start switching on the display. Stop until the desired Sleep Timer setting appears on the display. The setting will be saved and the LCD will return to normal display. 3. Your radio will switch off automatically after the preset Sleep Timer has elapsed. The Sleep Timer icon will show on the display indicating an active Sleep Timer. 4. To cancel the Sleep Timer function before the preset time has elapsed, simply press the Power button to turn the unit off manually. 1. Press the Source button to select Bluetooth® function. “BT READY” will be shown on the display and “READY” will flash with every 2 seconds interval. device’s user manual to allow the paring procedure. 3. Press and release the Pair button , then “BT PAIR” will be shown on the display and it will flash with 1 second interval. You can start the search of your radio on your Bluetooth® device. Once the name of your radio is appeared on your Bluetooth® device, press the item in your Bluetooth® list. With some old type mobiles (versions earlier than BT2.1 Bluetooth® device), you may need to input the pass code “0000”. 4. Your Bluetooth® device will be linked with the radio. 5. Once connected, “BLUETOOTH” will remain on the display and the backlight will be dim-out in Loudness You can get compensation on lower and higher frequency for your radio by adjusting the loudness function. 1. Press and hold the Menu/Info button to enter the menu setting. 2. Rotate the Tuning control knob until “LOUD ON” or “LOUD OFF” appears on the display. Press the Tuning to enter the setting. 3. Rotate the Tuning control knob to choose ON to turn on the loudness function, then press the Tuning control knob Pairing your Bluetooth® device 2. Activate Bluetooth® on your device according to the 2. Keep holding the Power button control knob Listening to Bluetooth® music You need to pair your Bluetooth® device with your radio before you can auto-link to play/stream Bluetooth® music through your radio. Paring creates a permanent “bond” so two devices can always recognize each other. to confirm the setting. 10 seconds. You can now play the music in your Bluetooth®-enabled device via your radio. Playing Bluetooth® device which has already paired 1. Press the Source button to select Bluetooth® function. “BT READY” will be shown on the display and “READY” will flash with every 2 seconds interval. 2. Search and link the radio on your Bluetooth® device. Some device may link with the radio automatically. You can now play the music in your Bluetooth®-enabled device via your radio. 11 Note: a) The radio can pair with 8 Bluetooth® devices at most. When you pair Bluetooth® devices more than this number, pairing history will be overwritten from the oldest pairing history. b) If there are 2 Bluetooth® devices searching for your radio, it will show its availability on both devices. c) If your Bluetooth® device is temporarily disconnected to your radio, then you need to manually reconnect your device again to the radio. d) If the name of your radio is appeared on your Bluetooth® device list but your device cannot connect with it, please delete the item name of your radio from your list and pair the device with your radio again following the steps described previously. e) The effective operation range between the radio and the paired device is approximately 10 meters (30 feet). f) Any obstacle between the radio and the device can reduce the operational range. Disconnecting your Bluetooth® device Press and hold the Pair button onto the USB port when not charging the lower voltage device. • Do not insert a nail, wire, etc. into USB power supply port. Otherwise a circuit short may cause smoke and fire. • Do not connect this USB socket with your PC USB port, as it is highly possible that it may cause breakdown of the units. MAINTENANCE CAUTION: • Never use gasoline, benzine, thinner, alcohol or the like. Discoloration, deformation or cracks may result. Specifications: Power Requirements AC power adaptor Battery for 2-3 seconds to disconnect with your Bluetooth® device. “BLUETOOTH” Frequency coverage will disappear from the display indicating deactivation of Bluetooth®. Charging with USB power supply port (Fig. 9) There is the USB port at the front side of the radio. You can charge USB device trough the USB port. 1. Connect the USB device, such as iPod, MP3, or CD player, with USB cable available in the market. 2. Press the Power button to switch on your radio. 3. No matter if the radio is AC powered or battery powered, the radio can charge the USB device when the radio is switched on and in FM radio mode, or BT mode, or AUX mode, which is appeared when an external audio source is connected. Note: You cannot charge USB devices during AM mode because radio signal reception becomes extremely poor when charging USB device. • The maximum volume of the output power speaker will decrease when your USB is charging. • The USB socket can provide max 1A5V of electrical current. Important: • Before connecting USB device to the charger, always backup your data of USB device. Otherwise your data may lose by any possibility. • The charger may not supply power to some USB devices. • When not using or after charging, remove the USB cable and close the cover. • Do not connect power source to USB port. Otherwise there is risk of fire. The USB port is only intended for charging lower voltage device. Always place the cover 12 Bluetooth® Bluetooth® version Bluetooth® profiles Transmission power Transmission range Supported codec Compatible Bluetooth® DC12V/1,200 mA, center pin positive UM-3 (AA size) x 2 for back up Cluster battery: 7.2 V - 10.8 V Slide battery: 14.4 V - 18 V FM 87.50 - 108 MHz (0.1 MHz/step) AM (MW) 520 - 1,710 kHz (10 kHz/step) 4.0 A2DP/SCMS-T Bluetooth® specification power Class 2 Max. 10 m (30 ft) (varies according to usage conditions) SBC profile A2DP Circuit feature Loudspeaker Output Power 3.5 inches 8 ohm x 2 7.2 V: 0.5 W x 2 10.8 V: 1.2 W x 2 14.4 V: 2.2 W x 2, 18 V: 3.5 W x 2 Input terminal 3.5 mm dia. (AUX IN1/AUX IN2) Antenna system FM: soft bended rod antenna AM: bar antenna Dimension (W x H x D) in mm 282 x 294 x 163 (11-1/8” x 11-5/8” x 6-3/8”) Weight 4.3 kg (9.5 lbs) (without battery)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 12 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:cce5ed21-3dfb-11e7-0000-2ffa182cb07d Producer : GPL Ghostscript 9.14 Keywords : Modify Date : 2017:05:18 16:02:13+08:00 Create Date : 2017:05:18 16:02:13+08:00 Creator Tool : PDF24 Creator Document ID : uuid:cce5ed21-3dfb-11e7-0000-2ffa182cb07d Format : application/pdf Title : Creator : Description : Author : Subject :EXIF Metadata provided by EXIF.tools