Sanitaire S647 Series Users Manual 75326 Sanitaire_Pro

S647 Series to the manual d6f40c3f-f03c-45c3-9c5e-dbc4ea592d12

2015-02-06

: Sanitaire Sanitaire-S647-Series-Users-Manual-526032 sanitaire-s647-series-users-manual-526032 sanitaire pdf

Open the PDF directly: View PDF .
Page Count: 7

PLEASE RETAIN

We suggest you record the model, type and serial

numbers below. They are located on the silver rating

plate on your cleaner. For prompt and complete

service information, always refer to these numbers

when inquiring about service.

Model & Type

Serial No.

It is also important to keep your receipt as proof of

date of purchase.

Heavy Duty

Upright Vacuum Cleaner

Household Type

Ownerʼs Guide

Model S647 Series

IMPORTANT

not

return this product to

the store. Call 1-800-800-8975*

Monday - Friday, 8 am to 7:30

pm CST and 10 am to 6:30 pm

Saturday or visit our web site,

www.sanitairevac.com for any

of the following:

• assembly problems

• replacement of broken or missing

items

• to order replacement parts and

accessories

• to locate the nearest Sanitaire

Warranty Station

*En Mexico llame al (55) 5343-4384

www.sanitairevac.com

Part No. 75326

(12/04)

Index

Important Safeguards

..................................

Service Information

......................................

Assemble

.....................................................

Use

...............................................................

Dust Bag

......................................................

Brush Roll Belt

.............................................

Brush Roll

....................................................

Headlight

......................................................

Warranty

.......................................................

GENERAL INFORMATION

To reduce the risk of electric shock,

this appliance

has a polarized plug (one blade is wider than the other).

The plug will ﬁ t in a polarized outlet only one way. If the

plug does not ﬁ t fully in the outlet, reverse the plug. If it

still does not ﬁ t, con tact a qualiﬁ ed electrician to install

the proper outlet. Do not change the plug in any way.

The bag may have come dislodged in shipping. Check

the bag to insure proper seating before attempting to

use the cleaner. Do not operate the cleaner without a

dust bag. Damage may result to the motor.

The cleaner is designed to pick up dirt and dust particles.

Avoid picking up hard or sharp objects with the cleaner

to avoid bag breakage, hose clogging, or possible motor

damage.

Service Information

The instructions in this booklet serve as a guide to

routine maintenance. If additional service is required,

telephone toll free:

USA: 1-800-800-8975

Mexico: (55) 5343-4384

Canada: 1-800-800-8975

If you prefer, you can write to Electrolux Home Care

Products North America, Consumer Service, P.O. Box

3900 Peoria, Illinois 61612, USA.

n Canada write to

lectrolux Home Care Products North America, 866

Langs Drive, Cambridge, Ontario N3H 2N7. Refer to

The Sanitaire Limited Warranty for com plete service

information.

DO NOT OIL the motor or the brush roll at

any time. The bearings are permanently

lubricated and sealed.

IMPORTANT

SAFEGUARDS

When using an electrical appliance, basic precautions should

always be followed, including the following:

READ ALL INSTRUCTIONS

BEFORE USING THIS VACUUM CLEANER.

WARNING

To reduce the risk of ﬁ re, electric shock, or injury:

•

Do not use outdoors or on wet surfaces.

• Do not leave vacuum cleaner when plugged in.

Turn off the

switch and unplug the electrical cord when not in use and before

servicing.

•

Do not allow to be used as a toy. Close attention is necessary

when used by or near children.

•

Use only as described in this manual. Use only manufacturerʼs

recommended attachments.

•

Do not use with damaged cord or plug. If vacuum cleaner is

not working as it should, has been dropped, damaged, left

outdoors, or dropped into water, return it to a service center

before using.

•

Do not pull or carry by cord, use cord as a handle, close a door

on cord, or pull cord around sharp edges or corners. Do not

run vacuum cleaner over cord. Keep cord away from heated

surfaces.

•

Do not use extension cords or outlets with inadequate current

carrying capacity.

•

Turn off all controls before unplugging.

•

Do not unplug by pulling on cord. To unplug, grasp the plug, not

the cord.

•

Do not handle plug or vacuum cleaner with wet hands.

•

Do not put any object into openings. Do not use with any

opening blocked; keep free of dust, lint, hair, and anything that

may reduce airﬂ ow.

•

This vacuum cleaner creates suction and contains a revolving

brush roll. Keep hair, loose clothing, ﬁ ngers, and all parts of

body away from openings and moving parts.

•

Do not pick up anything that is burning or smoking, such as

cigarettes, matches, or hot ashes.

•

Do not use without dust bag in place.

•

Belt pulleys can become hot during normal use. To prevent

burns, avoid touching the belt pulley when servicing the drive

belt.

•

Use extra care when cleaning on stairs.

•

Do not use to pick up ﬂ ammable or combustible liquids such as

gasoline, or use in areas where they may be present.

•

Store your cleaner in a cool, dry area.

•

Keep your work area well lighted.

•

Unplug electrical appliances before vacuuming them.

SAVE THESE

INSTRUCTIONS

HOW TO ASSEMBLE

CAUTION: Completely assemble vacuum cleaner before

using.

2-Part

Bolt

Upper

Cord Hook

Lower

Cord Hook

Bag

Screws

Assembly Packet is with ownerʼs guide.

Detail A

Step 1

Attach the Handle

Push the handle sections together. Note: Check to be sure

slots in handle are correct, see Detail A.

Align the holes in the handle. Insert a 2-part bolt (A) in the

center of the handle and tighten.

Push handle into the handle socket so handle grip curves

away from the cleaner. Align the holes, insert the other 2-part

bolt (A) and tighten.

Step 2

Attach Upper Cord Hook

Pull the flexible cord support up toward the top of the

handle.

Insert the lower half of the cord support into the upper cord

hook.

Check to be sure slots in handle are correct, see Detail A.

Place inner tab of cord hook into handle slot as shown (1)

and press hook handle (2) SNAPPING opposite inner tab

into place (3).

Step 3

Attach Lower Cord Hook

Insert the power cord into the lower

cord hook. Snap the hook into the

lower handle.

Pull up on the cord to tighten but

leave enough slack near the base

so there is no strain on the cord

when the handle is lower.

Step 4

Store Electrical Cord

Wrap the cord around the two cord hooks. Fasten the plug

to the electrical cord to prevent unwinding.

Step 5

Attach Outer Bag

IMPORTANT

: To provide a good gasket seal, the bag

coupling must seat ﬁ rmly against the motor

base and not overlap the furniture guard.

Hold outer bag with zipper away from the handle. Start the

bag screws (D) by hand, then tighten with a screwdriver.

Loop the bag spring onto the bag support hook on the back

of the upper cord hook.

3. SNAP opposite

inner tab into

place

1. Place inner

tab into slot

2. Press hook

around

handle

Flexible

Cord

Support

Lower Cord Hook

Upper Cord Hook

Bag

Support

Hook

Handle Lock

1. Store

2. Use

3.Clean

Underneath

HOW TO USE

The upright vacuum cleaner

is designed to be used on

multiple types of carpeting.

Do not attempt to use the

upright vacuum cleaner on

bare ﬂ oors,

as damage to

the ﬂ oor covering may result.

Above the ﬂ oor cleaning tools

are available (optional).

Cleaner Height Setting

WARNING: Avoid injury. Keep loose clothing, hair,

ﬁ ngers, and all other parts of body away

from any moving part (such as the revolving

brush). Turn off the switch and unplug the

cleaner before changing the cleaner height

setting.

The front of the cleaner has an ad just ment that raises or

lowers the cleaner base to match the type of carpet. With

the cleaner cord unplugged, set the ad just ment to low est

setting for maximum cleaning. If the clean er is difﬁ cult to

push, move ad just ment to next highest setting until cleaner

is com fort able to push. The brush roll must reach the carpet

for ef fec tive cleaning.

Make each adjustment with cleaner switch off and

cord disconnected from out let.

For ease in moving the

ad just ment knob, place handle in op er at ing position and tilt

cleaner back to re move weight from front wheels.

Handle Adjustment

With the tip of the foot, press down to release the handle lock

located at the left rear side of the cleaner. Move the handle

and adjust it to the desired position for (1) storing upright, (2)

operating the cleaner at a comfortable height for the user,

and (3) cleaning underneath low furniture.

ON/OFF

Power Switch

The power switc h is

mounted on the motor hood.

A push with the foot turns

the motor ON; push again

to turn the motor OFF.

Cord Storage

The cleaner has two convenient cord storage

hooks attached to the handle. However, some

models feature a quick release cord hook on

the upper handle. A downward twist of the

cord hook frees the cord for quick removal.

With either style, wind the cord around the

hooks for storage. Fasten the plug to the cord

to prevent unwinding.

HOW TO MAINTAIN

The instructions given in this booklet serve as a guide to

routine maintenance. To avoid unnecessary service calls,

check the bag, belt and brush roll often.

Disposable Dust Bags

Paper bags play a very important role in the efﬁ ciency of a

vacuum cleaner. The purpose of a paper bag is to trap dirt.

But at the same time the paper bag must be porous enough to

allow air to pass through. If the paper bag becomes clogged,

no air can pass through the cleaner and no cleaning can take

place, regardless of how powerful the unit. Change the dust

bag frequently. Some ﬁ ne particles can restrict airﬂ ow very

quickly and will decrease performance even before the bag

appears to be full. For that reason, when vacuuming carpet

fresheners or cleaners, powder, plaster dust, or similar ﬁ ne

substances, the bag may need to be changed more often.

How To Change Disposable Dust Bag–Style F

& G, PN 54924A

CAUTION: Turn off the switch and unplug the electrical

cord before changing dust bag. Never

operate the vacuum cleaner without the

dust bag.

Ask for GENUINE EUREKA dust bags – Style F & G.

Look for the symbol.

GENUINE

Look for the symbol.

EUREKA PRODUCT

Look for the symbol.

6. Roll up coil spring.

7. Place paper bag into outer bag.

NOTE: Be certain there are no folds

at the top or bottom of the

paper bag.

8. Lift zipper

4. Unfold

new bag.

3. Pull bag

throat off

sleeve.

1. Pull

zipper

down

5. Place bag

throat on

sleeve.

TOP

BOTTOM

THROAT

2. Roll down

coil spring.

Micron Filter

Bag Care

(Micron Filter Bag is standard on some models)

Because the Micron Filter Bag is an effective ﬁ lter medium,

occasionally trapped dust particles will need to be cleaned

from the inside of it. The dust accumulation can be vacuumed

out with another vacuum or the bag may be removed to shake

out. If you desire, the bag may be hand laundered. The zipper

on the bag should be down and the bag should remain right

side out. Use warm water (150°F 65°C) and a mild detergent.

Pre-soaking the bag in a laundry pre-soak is desirable for

best cleaning results. Air dry thoroughly before using.

DO NOT USE AN AUTOMATIC WASHER OR DRYER

either will cause abrasion to the delicate polyester fabric.

NOT DRY CLEAN

as dry cleaning ﬂ uids will damage plastic

parts of your bag assembly.

Cleaner Care

CAUTION

: Turn off the switch and unplug the electrical

cord before cleaning unit.

To keep the vacuum cleaner looking new, it can be wiped with

a damp cloth and a mild soap solution, then thoroughly dried.

Never use any type of chemical as chemicals can damage

the cleaner. When not in use, the cleaner should be stored

in a clean, dry place.

Brush Roll Belt

The brush roll belt on the upright vacuum cleaner drives the

brush to agitate, sweep, and comb the carpet nap. The belt

should be checked regularly to be sure it is in good condition.

Replace the belt if it is stretching, cracking, or slipping. Cut

away any hair or thread wound around the brush roll or the

belt pulley because the buildup could cause the belt to rotate

unevenly.

How To Replace A Worn Belt

PN 52100A, Style RD

CAUTION

: Turn off the switch and unplug the electrical

cord before replacing belt. Belt pulleys can

become hot during normal use. To prevent

burns, avoid touching the belt pulley when

servicing the drive belt.

IMPORTANT: Improper installation of the brush roll

or brush roll belt could

cause carpet or

cleaner damage.

1. Release cam locks.

2. Pull up on belt to rotate it off the motor pulley. Lift up

on brush rolL and remove worn belt.

Motor

Pulley

Check for brush wear (see Brush Roll instructions).

3. Place new belt around brush roll.

4. Align brush roll pulley with belt guide.

Metal Brush Roll only.

Place rubber end cap covers (available on select models)

over both end caps (ﬂ at side against end cap). Align holes

and secure.

5. Slant brush roll forward so end caps are in line with

slots in cleaner base.

6. Push brush roll into base.

7. Place lower side of belt into belt guide and pull to

stretch the belt around the left side of motor pulley.

Rotate pulley to secure belt into groove.

8. Place slots of bottom

plate over tabs of cleaner

base.

9. Seat and secure cam

locks.

Ask for GENUINE EUREKA

replacement belts, No. 52100A

Look for the symbol.

GEN U INE

EUREKA PRODUCT

Look for the symbol.

EUREKA PRODUCT

Look for the symbol.

Belt

Guide

Brush Roll

The rotating brush roll sweeps and combs the carpet nap.

Keep the brush roll free from hair and threads so it will

continue brushing. When the bristles of the brush roll no

longer touch a straight edge held across the bottom plate,

the brush roll is ineffective because the bristles no longer

touch the carpet nap. To maintain the most effective cleaning,

replace the wood brush roll. Install new brush strips on the

chromed steel brush roll (refer to instructions).

How To Replace Worn Brush Strips, PN 52282-4

(chromed steel brush roll)

CAUTION: Turn off the switch and unplug the electrical

cord before replacing brush strips.

New brush strips are supplied in sets of two, one long and

one short. To replace, remove bottom plate and belt (see

How To Change Belt). Then, grasp center of brush roll and

lift to remove.

G. Slide in new brush strip of same

length (rounded end ﬁ rst). Fit track

on either side into brush roll slot.

Re place second brush strip from

op po site end of brush roll.

F. Replace shaft.

E. Align indentation on bearing retainer

with brush strip on both ends of

brush roll.

D. Replace shaft washer.

C. Position end cap with flat sides

of center hole over flat sides of

thread ed shaft.

B. Tighten locknut.

A. Align holes and secure rubber end

cap cover flat side against end

cap.

A. Remove rubber end cap cover

(avail able on select models)

from one end.

B. Unscrew locknut.

C. Remove end cap.

D. Remove shaft washer (not

included in ball bearing brush

roll).

E. Remove bearing retainer.

F. Push shaft through opposite

end.

G. Pull out worn brush strip with

pliers.

When properly assembled, the brush roll should rotate freely

between the two end caps. Check the condition of the belt;

change if necessary. Replace the brush roll, belt, and bottom

plate (see How To Replace A Worn Belt).

Ask for GENUINE EUREKA replacement brush strip.

12 inch No. 52282-4.

Note:

Shaft washer (D) not included in ball bearing brush roll as sem bly.

A B C D E

Headlight Bulb

(Standard on most models)

CAUTION

: Turn off the switch and unplug the electrical

cord before replacing headlight bulb.

Headlight style varies by model. Locate the notches that

release the tabs at either (1) top, (2) side, or (3) bottom of

the lens, as illustrated. Place a screwdriver into one notch;

twist or pry the screwdriver to release the lens. Repeat for

the second notch on the opposite side.

Rotate the bulb socket forward. Push bulb in and turn to

remove. Secure new bulb into socket and rotate bulb socket

backward.

Replace the lens tabs into the top or the bottom of the hood

opening. Rotate lens to position and press down at each

notch until the lens locks into position.

CAUTION: Use 25 watt replacement bulb, only.

Ask for GENUINE EUREKA replacement bulb, 40009A.

Cleaner Care

CAUTION

: Turn off the switch and

unplug the electrical cord

before cleaning unit.

To keep the vacuum cleaner looking new,

it can be wiped with a damp cloth and

a mild soap solution, then thoroughly

dried. Never use any type of chemical

as chemicals can damage the cleaner.

When not in use, the cleaner should be

stored in a clean, dry place.

hat This Warranty Covers

What This Warranty Covers

Your Sanitaire cleaner is warranted to be free from all defects in material and workmanship in normal household use for a period of two years.

The warranty is granted only to the original purchaser and members of his or her immediate household. The warranty is subject to the following

provisions.

hat This Warranty Does Not Cover

What This Warranty Does Not Cover

•

Parts of the cleaner that require replacement under normal use, such as disposable dust bags, ﬁ lters, drive belts, light bulbs, and brush roll

bristles.

•

Damages or malfunctions caused by negligence, abuse, or use not in accordance with the Ownerʼs Guide.

•

Defects or damages caused by unauthorized service or the use of other than Genuine Eureka/Sanitaire parts.

hat Electrolux Home Care Products North America Will Do

What Electrolux Home Care Products North America Will Do

Electrolux Home Care Products North America will, at its option, repair or replace a defective cleaner or cleaner part that is covered by this warranty.

As a matter of warranty policy, Electrolux Home Care Products North America will not refund the consumerʼs purchase price.

xtended Warranty for Upright Cleaner (Only)

Extended Warranty for Upright Cleaner (Only)

The base of the Sanitaire Upright cleaner is warranted for ﬁ ve years from the original date of purchase.

xtended Warranty for SYSTEM_PRO Canisters

Extended Warranty for SYSTEM_PRO Canisters

The motor for SYSTEM_PRO canister cleaners is warranted for ﬁ ve years from the original date of purchase.

arranty Registration

Warranty Registration

Please ﬁ ll out and return the warranty registration card accompanying your cleaner.

btaining Warranty Service

To obtain warranty service you must return the defective cleaner or cleaner part along with proof of purchase to any Sanitaire Authorized Warranty

Station. You will ﬁ nd the nearest location in the Yellow Pages, under “Vacuum Cleaners–Service and Repair.” Be certain that the Warranty Station

is “Sanitaire Au tho rized.” For the location of the nearest Sanitaire Authorized Warranty Station or for service information, telephone toll free:

USA: 1-800-800-8975

Mexico: (55) 5343-4384

Canada: 1-800-800-8975

If you prefer, you can write to Electrolux Home Care Products North America, Service Division, P.O. Box 3900, Peoria, Illinois 61612, USA. In

Canada write to Electrolux Home Care Products North America, 866 Langs Drive, Cambridge, Ontario N3H 2N7.

If it is necessary to ship the cleaner outside your community to obtain warranty repair, you must pay the shipping charges to the Sanitaire Au tho rized

Warranty Station. Re turn shipping charges will be paid by the Warranty Station. When returning parts for repair, please in clude the model, type,

and serial numbers from the data plate on the cleaner.

urther Limitations and Exclusions

Any warranty that may be implied in connection with your purchase or use of the cleaner, including any warranty of Merchantability or any

warranty for Fitness For A Particular Purpose is limited to the duration of this warranty. Some states do not allow limitations on how long an

implied warranty lasts, so the above limitations may not apply to you.

Your relief for the breach of this warranty is limited to the relief expressly provided above. In no event shall Electrolux be liable for any consequential

or incidental damages you may incur in connection with your purchase or use of the cleaner. Some states do not allow the exclusion or limitation

of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

This warranty gives you speciﬁ c legal rights. You may also have other rights which vary by state.

uestions & Answers about Genuine Eureka/Sanitaire Products

Why should I use only Genuine Eureka/Sanitaire paper bags, belts, and parts in my Eureka/Sanitaire vacuum cleaner?

A: Using Genuine Sanitaire Products, which are made to our exacting speciﬁ cations and engineered with emphasis on quality,

performance, and customer sat is fac tion, ensures the long life and cleaning efﬁ ciency of your vacuum clean er. Overall, this

saves you money and helps to keep your home clean.

How can I be sure I am using only Genuine Eureka/Sanitaire products in my vacuum cleaner?

A: Typically, packaged products and paper bags can be identiﬁ ed by a Eureka or Sanitaire logo. For further iden ti ﬁ ca tion

assistance, you may call our toll-free number, 1-800-800-8975, for the lo ca tion of a nearby Eureka/Sanitaire Authorized

Warranty Station.

Are there any differences between “made to ﬁ t” or “imitation” and Genuine Eureka/Sanitaire paper bags, belts, and parts?

A: Yes, there are some very important differences in materials, quality, and reliability. Many customers have mistakenly

purchased “imitation” paper bags and parts while thinking they purchased genuine. Unfortunately, many of these cus tom ers

discovered the differences after they experienced related dif ﬁ cul ties.

For Genuine Sanitaire Value, Accept No Imitations!

ELECTROLUX HOME CARE PRODUCTS NORTH AMERICA

Bloomington, Illinois 61701

THE SANITAIRE LIMITED WARRANTY

GEN U INE

EUREKA PRODUCT

Household Warranty

www.sanitairevac.com

Sanitaire S647 Series Users Manual 75326 Sanitaire_Pro

S647 Series to the manual d6f40c3f-f03c-45c3-9c5e-dbc4ea592d12

Navigation menu

Versions of this User Manual:

Views

Navigation