Sanus Systems Television Turntables Tv Vcr Users Manual TVTurntable_TVVCRins_070604

TELEVISION TURNTABLES TV13 TV13_manual

TELEVISION TURNTABLES TV32 TV32_TVxx_TV-VCRins_070604

TELEVISION TURNTABLES TV27 TV_VCR_manual

TV27 to the manual 91340148-4415-419f-9a91-f52b5933161a

: Sanus-Systems Sanus-Systems-Television-Turntables-Tv-Vcr-Users-Manual-526057 sanus-systems-television-turntables-tv-vcr-users-manual-526057 sanus-systems pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

Assembly Instructions for Television TurntablesTM TV13, TV20, TV27, TV32
Congratulations on your purchase! Sanus Systems Television TurntablesTM are functional, attractive, and inexpensive. They
are finished with a black powder that is both durable and beautiful. Please check carefully to make sure there are no missing or defective parts. Never use defective parts. Improper assembly may cause damage or injury. If you do not understand
these directions, or have any questions about this assembly please contact Sanus at 800.359.5520 or www.sanus.com. We
can quickly assist you with installation questions and missing or damaged parts.
Supplied Parts: (1) Television Turntable
Supplied Parts: (1) Self Adhesive Protective Feet (pad of 4)
Step 1:
Position the Turntable so the black nylon swivel is facing
up. Locate the circles at the end of each spoke. Next, place a
Adhesive Foot inside each circle, as shown in Diagram 1.
NOTE: If you are going to use the optional TV-VCR Kit,
Proceed to the instructions for those at the bottom of the
page, otherwise, proceed to Step 2.

Diagram 1
Adhesive
Foot

Circle
Bottom of
Turntable

Diagram 2

Step 2:

Top of Turntable

Flip the Turntable over and place it in the desired position
on a shelf or cabinet so the Adhesive Feet are facing down
and are in direct contact with the shelf or cabinet as shown
in Diagram 2.

Assembly Instructions for Optional TV-VCR Kit*
TV-VCR Kit will not work with the TV13 Turntable

*

Contents: (1) Base
Contents: (2) Support Pillars
Contents: (4) Plastic Dowels
Contents: (4) Allen bolts
Contents: (1) Allen Wrench

Support
Pillar

TV Turntable (sold separate)

Support
Pillar
Base

Sanus Systems 2221 Highway 36 W. St. Paul, MN 55113
800.359.5520 www.sanus.com 7.6.04

Step 1:

Phillips Screw

Remove the swivel from the TV Turntable by removing the
Phillips Screw in the center of the swivel as shown in the Diagram to the right.

Bottom of
Turntable

Step 2:
Use the same Phillips Screw removed from Step 1 to fasten the
swivel to the base of the TV-VCR Kit. Insert the Phillips screw
through the center hole of the swivel and proceed to thread it
into the appropriate pilot hole in the center of the TV-VCR
Kit as shown in the Diagram on the right. Tighten the Phillips
Screw with a phillips screw driver until tight.

Phillips Screw

NOTE: When using the TV20 use the front Pilot Hole. When
Using the TV27 or TV32 use the rear Pilot Hole.

Front Pilot Hole

Step 3:

Plastic Dowels

Insert the Plastic Dowels into the larger holes in the Support
Pillar as shown in the Diagram on the right. Gently tap the Plastic Dowels in with a hammer if needed. Repeat step for the
other Support Pillar.

TV-VCR Kit Base

Rear Pilot Hole

Larger Hole

Support Pillar

Step 4:
Thread the Allen Bolts up through the Base of the TV-VCR Kit,
and into the corresponding holes in the Support Pillar. Tighten
Allen Bolts with the provided Allen Key until they are tight.

Top of TV-VCR Base

Allen Bolts

Nylon Swivel is
Located on the Bottom
Top of TV Turntable

Step 5:
Add the TV Turntable to the TV-VCR Kit by setting the Turntable on top of the Support Pillars so the dowels in the Support
Pillars line up with the holes in the bottom side of the turntable.
Press the Turntable down firmly until the bottom of the Turntable is flush with the top of the Support Pillars.

Plastic
Dowel

Top of TV-VCR Kit
Sanus Systems 2221 Highway 36 W. St. Paul, MN 55113
800.359.5520 www.sanus.com 7.6.04

Front of Assembly



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
About                           : uuid:121c6d3a-cf5e-11d8-a159-000a95bc9c50
Create Date                     : 2004:07:06 09:21:11Z
Metadata Date                   : 2007:06:04 14:08:11-05:00
Modify Date                     : 2007:06:04 14:08:11-05:00
Creator Tool                    : Adobe InDesign CS (3.0.1)
Rendition Class                 : proof:pdf
Document ID                     : adobe:docid:indd:5cfcdd92-d0ba-11d8-b18f-994dea756b9b
Instance ID                     : uuid:2dfbf636-86c6-461c-a8a1-fc43465582f1
Derived From Instance ID        : 973e3fc4-c2ad-11d8-8b28-e83a1169bef1
Derived From Document ID        : adobe:docid:indd:973e3fc3-c2ad-11d8-8b28-e83a1169bef1
Format                          : application/pdf
Title                           : TVTurntable_TVVCRins_070604.indd
Producer                        : Adobe PDF Library 6.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CS (3.0.1)

EXIF Metadata provided by EXIF.tools