Sanwa Electronic Instrument Co ATX93824 2.4GHz Radio Module User Manual 2

Download:
Mirror Download [FCC.gov]
Document ID	1016905
Application ID	JedV2qtFC7KtXfEeV9ez1g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	37.03kB (462856 bits)
Date Submitted	2008-10-17 00:00:00
Date Available	2008-10-17 00:00:00
Creation Date	2008-10-16 11:01:25
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2008-10-16 11:01:25
Document Title	Microsoft Word - 文档 2
Document Creator	PScript5.dll Version 5.2.2
Document Author:	DGY

Thank you for purchaslng your new FHSS Module and Receiver.
The FHSS Module and Reoeiyerare to be used in a Airtronios
M8, M11, Supev sxzss and sxzss Plus.
DO NOT try to use me FHSS Module 01 Receiver In any other
radio system. Please read this manual completely before
installing and or usan it. Always keep lhls manual to use as a
reference.
SERVO CONNECTIONS
install your FHSS Receiver as far away from any elewical components as possible. Route the antenna threw a
plastic lube so that it is In the upright positron. With me receiver power swttcn rn lhe oft position, msentne servos
and/or ESC as shown in the llluslralicn below
Your FHSS wslem reoerysrrs NOT equr ped wrm
[WWW BEC oircuttryDO NOT use more lhan 6.8 vollsllc H
. . . . OWE! the recelverfin In hl her Ihfifl 5.0 V0 (S WI
When lnslalllng your reoerver ln your model, always make Emmy a, destroy ymfihmgeivgr‘omy use 5 4.5.4.0
sure to set your mudel on a slant: so the wheels are free wk bane“, pack of a speed commue, mat is damned
from any traction oelore mmlng on your radio and/or to km. ("a voltage to ma receiver.
oonneolino your molar forlhe first time.
Brnoing Buuon
and Blue LED
wwlaamaa"
jj lnput any Max
)Auxiliary 2 Electronic Speed Controller Semp
=SJ
jAuxlllary 1
] (TH) Throttle
NOTE : To protect your receiver from damage, it Is reoornmenoeo tnat you wrap it in shock absorbing loam wnen
lnsmlllng ll m an R/C vehlde.
FHSS MODULE
Before lns'alling your FHSS Module, make sure the power switch on your transmitter is in the OFF position. Read the
lolluwing inslructlons first belore turning the Dower swilch to the ON Dnsltlon on the lrfinsmiflert
The FHSS Module can be rolated 135 degrees to me
leii or 135 degrees to me ngni ior a total ofzm degrees.
It also has lnree poo on up and down.Adjus| the FHSS
Module antenna to sull your prelorenoe.
45 9°
arnomo Button
and glue LED
BINDING RECEIVER lo TRANSMITTER
Afler Inslalllrlg the FHSS Receive! and Module, you are new ready to bind Ihem together. Binding Is Ihe proees that will
match the Ft-lss Receiver to the Ft-lss Module electronically as a match set You can bind additional Airtrunics FHSS
Receivers (0 Your FHSS Module to Operate many other cars. trucks and or boats.
Throttle Fail Sale is a teature that will move the throttle serve to a preset position that you set. If no user preset is added.
the Fort Sale will set itself to the neutral throttle position.
BINDING
1. Turn the power switch to the ON poslllon on the Transmitter.
The FHSS Module LED wil Iurri on alter 5 seconds.
2. Deprees and hold the FHSS ReceNer Bindtng button.
3. Turn the power swilch to the ON podiliun on the FHSS Receiver and conlinue holding the Binding butlcn.
The FHss Receiver LED wtll flash slowly.
4. Release the Binding button on the FHSS Reesrverafterz seconds
5. Depress and held the Binding btman on the transmitter until the LED on the FHSS Reoelverflsshes rapidly
6. Binding is new melete. Both FHSS Module and Receiver LED will now stay on.
7. Operate the controls to confirm.
THROTTLE FAIL SAFE
After binding at the FHSS Module and Receiver, you can set the Throttle Fail Safe fealure.
1. Turn the power switch to the ON position on the transmitter Confirm FHSS Module LED is on.
2 Turn the power switch to the ON position on the FHSS Receiver Confirm FHSS Receiver LED is on
3. Move controls Io confirm cannecliun between transmilter and receiver.
4. Move throttle lever to your desired Fail Safe position arid hold.
NOTE Il the throttle lever is Iefi in the neutral position, Fail Sale will be set atlhal position.
5. Depress the binding button on the FHSS Receiver for A seconds. LED will flash slow
6. Release the throttle lever alter the receiver LED starts to flash rapidly. and dISDonlmue pressing the Binding button on
the receiver.
7. Confirm that the Throttle Fail S is is working properly by turning the transminer power sWilch OFF The servo should
move to the preset tail sale no .Turn the transmitter power switch boat on to confirm lull control.
BINDING NOTES
Vou must rebind and reset Throttle Fail Sale on the FHSS Receiver when:
1. You change your M11 from (2 to 4; or (4 lo 2) channels.
2. install your FHss Module from a M11 to M3 or M5 to M’l1.ar\d super Exzes ro Exzes Plus.cr Exzos Plus to super Exzos.
FCC COMPLIANCE STATEMENT
This deVlce complies With Part 15 of the FCC Rules. Operation is sublect to the following two condition .
(1) this devioe may not cause harmful interterenoe, and
(2) this device must accept any irrtrsrrsrenoo received. including interference that may cause undesired operation
The manufacturer is not responsible to any radio or TV interierenoe caused by unaulhctnzed modifications to this equipment
Such modihcaitons could void the users authomy to operate the equipment.
FCC Caution: Any Changes or modifications not expressly approved by the party responsible for Compii-ance
could void the user's authority to operate this equipment.
This module must mot be co-locatsd or operating in conjunction with any other antenna or transmitter.
The final and pruduct must be labeled in a visible area with the fullnwing "Contains FCC ID L73ATX93824"
WARRANTY
Your Airtronics FHSS Module and FHSS Receivorare warranted forthe period or one yoarrrbm the original data or
purchase. when in need at any warranty service. send the rtam to the address helow with a detailed note stating the
problem you are having and include a copy or the original sales receipt. Any modificationsor abuse or the product wrll void
any warranty.
The FHSS Module and FHSS Receiver are not waterproct. water damage is not covered under any warranty
“ Ammomasirr
Distn'buied by Global Hobby Distributors
18480 Bandilier Circle. Fountain Valley. CA. 92728-8610
Tel (714)963-0329 Fax (714I962-G452
Web: MpJ/tmvwzlmmksnet Email: semoe@glmahoobynet 670A02075A

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2008:10:16 11:01:25+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2008:10:16 11:01:25+08:00
Format                          : application/pdf
Title                           : Microsoft Word - 文档 2
Creator                         : DGY
Document ID                     : uuid:2edac994-6b88-4cd5-b619-41dadbfdfdf9
Instance ID                     : uuid:65f25bfb-7bb4-40db-bfd6-9095ff191a38
Page Count                      : 2
Author                          : DGY

EXIF Metadata provided by EXIF.tools