Sanyo Electric Co CPE-400-2C0 W-CDMA subscriber terminal User Manual sp4user errata vol2 eps
Sanyo Electric Co Ltd W-CDMA subscriber terminal sp4user errata vol2 eps
Contents
- 1. users manual 1
- 2. Users manual 2
- 3. Users manula 3
Users manula 3
Power Supply Cord
The power supply cord is the disconnect device. Ensure
that the socket outlet is installed near the equipment and
can be easily accessed.
Telephone Line Cord
To reduce the risk of fire, use only No. 26 AWG or larger
telephone line cord.
ERRATA
(SP4 User Guide)
P 12
P 26
P 33
Copyright 2007 SOMA Networks, Inc. All Rights Reserved.
WARNING: To reduce the risk of fire, use only No. 26
AWG or larger telephone line cord to connect to the
telephone jacks on the SOMAport.
WARNING: The power supply cord is the disconnect
device. Ensure that the socket outlet is installed near
the equipment and can be easily accessed.
WARNING: Telephone jacks on the SOMAport are
for connecting the telephones only.
Do not connect the telephone line cord from these
jacks to the public telephone network. Otherwise,
you may pose a risk of electric shock or electrocution.
Supplementary to “Important Safety Instruction”:
Supplementary to “The Back Panel” section:
P 38
Supplementary to “Connection Telephones to SOMAport” section:
Supplementary to “Connecting the Power Supply and
Powering on the SOMAport” section:
P 75
Supplementary to “Internal antenna” specification
Inernal antenna gain: 0.36 dBi (700MHz)
3.0 dBi (Other frequencies)
Part S1AH6P1P0018-- Rev _