Sanyo Electric Co SCP-49H Dual-Band Analog/PCS Phone (AMPS/CDMA) User Manual

Sanyo Electric Co Ltd Dual-Band Analog/PCS Phone (AMPS/CDMA) Users Manual

Contents

Revised Users Manual per CRN 23117

Download: Sanyo Electric Co SCP-49H Dual-Band Analog/PCS Phone (AMPS/CDMA) User Manual
Mirror Download [FCC.gov]Sanyo Electric Co SCP-49H Dual-Band Analog/PCS Phone (AMPS/CDMA) User Manual
Document ID253604
Application ID9XWuuwgZdwklZG8ZADHL8A==
Document DescriptionRevised Users Manual per CRN 23117
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize55.13kB (689170 bits)
Date Submitted2002-06-28 00:00:00
Date Available2003-05-29 00:00:00
Creation Date2002-03-13 12:08:32
Producing SoftwareAcrobat PDFWriter 3.0J Windows
Document Lastmod2002-06-24 16:49:20
Document TitleUsers Manual
Document CreatorMicrosoft Word
Document Author: 加納

against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
If
this equipment does cause harmful interference to radio or television reception, which can
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Cautions
Any changes or modifications to your phone not expressly approved in this document could
void your warranty for this equipment and void your authority to operate this equipment.
Only use approved batteries, antennas and chargers. The use of any unauthorized
accessories may be dangerous and voids the phone warranty if said accessories cause
damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece of equipment and can be broken.
Avoid dropping, hitting, bending or sitting on it.
Body -Worn Operation
To maintain compliance with FCC RF exposure requirements, Body-worn operations are
restricted to belt-clips, holsters or similar accessories that have no metallic component in
the assembly and that provide at least 1.5 cm separation between the device, including its
antenna whether extended or retracted, and the user’s body. The use of accessories that do
not satisfy these requirements may not comply with FCC RF exposure requirements. For
more information about RF exposure, please visit the FCC website at www.fcc.gov.
Specific Absorption Rate (SAR) for Wireless Phones
The SAR is a value that corresponds to the relative amount of RF energy absorbed in the
head of a user of a wireless handset. The SAR value of a phone is the result of an extensive
testing, measuring and calculation process. It does not represent how much RF the phone
emits. All phone models are tested at their highest value in strict laboratory settings. But
when in operation, the SAR of a phone can be substantially less that the level reported to the
FCC. This is because of a variety of factors including its proximity to a base station antenna,
phone design and other factors. What is important to remember is that each phone meets
89
strict federal guidelines. Variations in SARs do not represent a variation in safety. All
phones must meet the federal standard, which incorporates a substantial margin of safety.
As stated above, variations in SAR values between different model phones do not mean
variations in safety. SAR values at or below the federal standard of 1.6 W/kg are considered
safe for use by the public.
The highest reported SAR values of SCP-6200 are:
AMPS mode (Part 22) - Head: 1.480 W/kg; Body-worn: 1.08 W/kg
PCS mode (Part 24) - Head: 1.300 W/kg; Body-worn: 1.150 W/kgbe determined by turning the
equipment off and on, the user is encouraged to try to correct
FCC Radio Frequency Emission
This phone meets the FCC Radio Frequency Emission Guidelines. FCC ID number:
AEZSCP-49H. More information on the phone’s SAR can be found from the following FCC website:
http://www.fcc.gov/oet/fccid
90

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2002:03:13 12:08:32Z
Modify Date                     : 2002:06:24 16:49:20-06:00
Page Count                      : 2
Has XFA                         : No
Creation Date                   : 2002:03:13 12:08:32Z
Author                          : 加納
Producer                        : Acrobat PDFWriter 3.0J Windows
Mod Date                        : 2002:06:24 16:49:20-06:00
Metadata Date                   : 2002:06:24 16:49:20-06:00
Title                           : FCC申請(4900).PDF
Creator                         : 加納
EXIF Metadata provided by EXIF.tools
FCC ID Filing: AEZSCP-49H

Navigation menu