Sanyo 10 Disc Dvd Cd Changer Dv S100 Users Manual

DV-S100 to the manual a61514ea-8d1c-416f-9702-ee1f29dd3287

2015-01-26

: Sanyo Sanyo-10-Disc-Dvd-Cd-Changer-Dv-S100-Users-Manual-336864 sanyo-10-disc-dvd-cd-changer-dv-s100-users-manual-336864 sanyo pdf

Open the PDF directly: View PDF .
Page Count: 48

DV-S100

10-Disc DVD/CD changer

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ2

■Thank you for purchasing DV-S100.

This unit has many features, including:

■Composite Video output

(Front + Rear)

■FM Modulator (Included)

■Remote Control (Included)

In order to enjoy the features to their fullest and keep the unit in good working

order for a long time, read this manual thoroughly and keep it for future reference.

■The meanings of the symbols ( , , ) used on

pages 10-25 of this manual are as follows.

CDVCDDVD

■The region number of this unit is “2”.

The TV signal format of this unit is “PAL”

or “NTSC”.

......... Function available with a DVD video

......... Function available with a video CD

......... Function available with an audio CD

VCD

DVD

■During DVD video play, this unit uses the technology

described below.

Macrovision

This product incorporates copyright protection technology that is protected by

method claims of certain U.S. patents and other intellectual property rights owned

by Macrovision Corporation and other rights owners. Use of this copyright

protection technology must be authorized by Macrovision Corporation, and is

intended for home and other limited viewing uses only unless otherwise authorized

by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Dolby Digital

Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

DTS

“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

■ 10-Disc DVD Video/Video CD/CD player

■ Built-in MPEG 2/1 Decoder

■ Optical Digital Output for AV

Entertainment Master Unit

(Dolby Digital/Linear PCM/DTS)

Introduction

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ1

Contents

Before use

Precautions for handling discs ..............................................................................3

How to use the magazine .....................................................................................3

Accessories...........................................................................................................4

For safe and efficient operation ............................................................................5

Playable discs .......................................................................................................6

Before using the system (Power On) ....................................................................7

Remote control......................................................................................................8

Audio CD Operation Screen .................................................................................8

Name & functions of each part..............................................................................9

Basic operation

Switching Off.......................................................................................................10

Stopping Play......................................................................................................10

Selecting a Disc ..................................................................................................11

Advancing / Returning to a Chapter or Track......................................................11

Fast Playback .....................................................................................................12

Using the Title Menu ...........................................................................................12

Using DVD Menus ..............................................................................................13

Using the PBC (Playback Control) Function ..................................................13,14

Other operation

Using Frame Advance Play and Slow Play.........................................................15

Using Title Search, Chapter Search, Track Search, and Time Search...............16

Switching the Audio Language ...........................................................................17

Switching the Audio Output Method....................................................................17

Switching the Subtitle Language.........................................................................18

Switching the Angle ............................................................................................18

Using Scan Play, Random Play, and Program Play ...........................................19

Creating a Program List................................................................................19~21

Using Repeat Play .........................................................................................21,22

Using A-B Repeat Play Mode ........................................................................22,23

Displaying a Disc List.....................................................................................23,24

Displaying Running Time ....................................................................................24

Switching the Type of Running Time Display .....................................................25

Setup

Performing Basic Operations for Setup Changes ..........................................25,26

Changing the DVD Menu Language ..............................................................26,27

Changing the Audio Language ......................................................................27,28

Changing the Subtitle Language....................................................................28,29

Changing the Digital Output...........................................................................29,30

Changing the Aspect Ratio (Vertical/Horizontal Screen Image Ratio)...........30,31

Changing Parental Settings ..........................................................................31~35

Switching Between OSD Message Display and Non-Display........................35,36

Changing the Player Language ..........................................................................36

Before wiring and installation...............................................................37

Wiring

Basic connection 1..............................................................................................38

Basic connection 2..............................................................................................39

Other connection (Example 1) ............................................................................39

Other connection (Example 2) ............................................................................40

Installation

Procedure for installation on carpet (Horizontal position) ...................................40

Procedure for installation on carpet (Vertical position) .......................................41

Procedure for installation on carpet (At a 45° angle) ..........................................41

Procedure for installation (Suspended position) .................................................42

Installation of Remote control sensor..................................................................42

Installation of FM modulator................................................................................42

Message displays.........................................................................................43

Troubleshooting ......................................................................................43~45

Specifications .................................................................................................45

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ2

■Dirt, dust, scratches and warpage cause sound skips

during playback and deterioration of sound and/or

picture quality. How to take care of your discs:

■ Fingerprints and dust should be carefully wiped from the disc’s signal surface

(glossy side) with a soft cloth. Unlike conventional records, the disc has no

grooves to collect dust and microscopic debris, so gently wiping with a soft cloth

should remove most particles. Wipe in a straight motion from the inside to the

outside of the disc. Small dust particles or light stains will have no effect on

reproduction quality.

■ Never use such chemicals as record sprays, antistatic sprays or fluids, benzene

or thinner to clean discs. Such chemicals would irreparably damage the disc’s

plastic surface.

■ Disc should be put back in their cases after use to avoid serious scratches that

could cause the sound to skip.

■ Do not expose discs to direct sunlight, high humidity, or high temperatures for

extended periods of time. Long exposure to high temperatures can warp the

disc.

■ Do not apply paper or write anything on either side of the disc. Sharp writing

instruments, or the inks used in some felt-tipped pens, may damage the

surfaces of the disc.

■ Never use the discs with unordinary shape, such as heart-shape, octagonal

shape, etc.. The use of such discs will result in malfunction.

■ Although protective film is being marketed as Disc accessories, use of these

products will result in malfunctions and should absolutely be avoided.

■With new discs

The symptoms described below sometimes

occur when new discs are used.

■ The disc is not played even when it is

loaded.

■ Operation changes to the next disc before

the first disc has a chance to be played.

■ The same disc is played over and over

again.

■The designated disc is not played.

These symptoms occur when there are burrs

on the center hole or outside circumference

of the disc and, as a result, the disc has not

been loaded properly or the disc catches on

something inside the magazine. In cases like

these, remove the burrs using a ball-point

pen or similar implement, as shown in the

figure on the right.

Center

hole

Burrs

Outside

circumference

Remove all plastic particles of burr

from surfaces of disc before loading

in magazine.

■Loading a disc

1Pick the tab on the magazine’s disc tray and

pull out only one of the trays.

2Place the disc on the tray with its play surface

facing up (label surface facing down).

* Each tray can accommodate only one disc.

3Press the tab on the disc tray to store the

tray back in the magazine.

* Up to ten discs can be loaded.

* This unit is not designed to play 3”(8cm)

discs. Inserting a 3”(8cm) disc into the

magazine, either with or without a 3”(8cm)

disc adapter, can damage the unit and disc.

■Installing the magazine

1Slide the door toward the right until it locks

into place.

2First check that the magazine with the discs

inside has its top side facing up and that it is

pointed in the right direction for installation.

Push it in until it clicks into place, indicating

that it is now locked.

* When the magazine is used for the first

time, it will not lock into place unless the

power supply has been connected.

¡Ejecting the magazine

1Slide the door toward the right until it locks

into place.

2Press the eject button ( ) to remove the

magazine.

Notes: Be absolutely sure to close the door

after having inserted or ejected the

magazine. Dust or dirt finding its way

inside may cause malfunctioning of the

unit.

AUDIO

Play side up

Eject button

Label side

down

Precautions for handling discs How to use the magazine

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ3

Small

bracket (L)

x 1 x 1 x 2

x 6 x 4

Small

bracket (R)

Nut

(M6)

Bracket (B)

x 4

Hexagonal bolt

(M6 x 20)

Tapping screw

(M5 x 12)

x 4 x 1

DIN 8 pin

cable

Hexagonal bolt

with washer

(M5 x 8)

x 1 x 2

Double

sided tape

Seals (A)

x 1

Seals (B)

Installation parts for Changer unit

x 1

Large

bracket (L)

x 1

Large

bracket (R)

Remote control

x 1

Dry battery (AA) for

Remote control

x 2

Magazine

x 1

Index labels

x 1

Remote control

sensor

x 1 x 1

Cord clip

x 1pair

Velcro tape

x 1

Cleaning cloth

FM modulator

x 1 x 1pair

Velcro tape

x 1

Parking brake cable

x 1

Extension cable

(For video)

Accessories

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ4

For safe and efficient operation

¡This unit is designed to operate on + 12 volt DC negative ground electrical systems

only.

¡According to this manual, install and operate the unit. If you are not confident in

your ability to install the unit correctly, have it installed by a professional mobile

electronics installation technician.

¡Do not try to open the unit to repair it yourself. If servicing is required, return the

unit to an authorized SANYO mobile audio dealer.

¡When cleaning the vehicle, be sure not to get any water on the unit because it can

be damaged.

¡Never put any object other than the magazine in the magazine slot. The inside of

the unit could be damaged by any foreign objects.

¡When not using the unit, do not forget to remove the magazine. Do not leave the

ejected magazine sitting on the edge of the unit for a long time. This can expose

the discs to direct sunlight and other causes of warpage. Keep the discs away from

direct sunlight.

¡Temperature

The unit may not operate correctly in extremely hot or cold temperatures. If this

should happen, stop using the unit until the temperature becomes normal.

The unit is equipped with a built in self protection circuit. When the temperature

inside the unit goes above the reference temperature, the protection circuit

automatically stops play and ejects the magazine. In this case, allow the vehicle to

cool, then start up unit again.

¡Condensation

Moisture can condense on the optical lens of the unit during rainy and humid days,

or right after the heater is turned on in the vehicle. If this should happen, the unit

cannot read the disc and therefore cannot function properly.To remedy the

situation, remove the magazine from the unit and wait until the condensation

evaporates (approximately one hour).

¡Skipping

When you are driving on a rough surface, audio or video skips may occur. These

are inevitable and will not cause any damage or disc scratches, etc.

¡Cleaning

Do not attempt to clean the unit with chemical solvents as this might damage the

finish. Use a clean, dry cloth.

For safe driving;

¡If the driver wishes to watch a DVD or video CD, stop the vehicle in a safe

place and set the parking brake. The unit detects the parking brake setting,

and a monitor connected to the front video output will not display disc images if

the parking brake is not set (when the parking brake is not set, the screen is

black).

¡Do not install a monitor connected to the rear video output in a location where

the driver can see the picture while driving.

The rear video output is for connection of a monitor installed near the rear

seats so that rear seat passengers can view disc images.

¡Keep the sound low enough to enable you to hear the outside sounds when

driving.

¡Do not exchange the discs, adjust the volume or perform any other operation

which could prevent you from driving safely.

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ5

Playable discs

■The following types of discs can be played on this unit. ■Region number (Regional restriction number)

■PBC (Playback Control)-Compatible Video CDs

This unit is compatible with PBC-compatible video CDs.

In addition to typical audio and motion picture play, PBC-compatible video CDs

use PBC menus recorded on the disc to allow dialog-based play.

This manual refers to play using PBC menus as “PBC playback”.

zSee page 13, “Using the PBC (Playback Control) Function”.

■TV signal format switch (NTSC/PAL)

This unit has a TV signal format switch on its bottom. The switch is set to “PAL”

when you purchase the unit. If you want to play a disc recorded in NTSC format,

change the position of the switch to “NTSC”.

* Use a ballpoint pen or similar fine-tipped implement

to change the position of the switch.

■The following discs cannot be played on this unit.

¡DVD-R ¡DVD-RAM ¡DVD-ROM ¡DVD-RW ¡DVD-Audio

¡CD-ROM ¡CD-G ¡Photo CD ¡CD-Extra (Data) ¡Mixed CD (Data)

¡Active Audio (Data) ¡VSD

¡3-inch (8 cm) discs

¡In case of a region number display for DVD videos when a region number other

than “2” or “ALL” is used

¡Discs recorded in a TV signal format other than PAL or NTSC

* Discs recorded in SECAM format cannot be played.

* Discs recorded in NTSC format cannot be played when the TV signal format

switch is set to “PAL”. Also, discs recorded in PAL format cannot be played

when the switch is set to “NTSC”.

¡Discs recorded with a DVD video deck

Note:

CD-R and CD-RW can be played back, but it depends on the recorded condition.

■Dual layer DVD video discs

When you play a dual layer disc, time lag may occur between the end of the 1st

layer and the beginning of the 2nd layer, and the picture may freeze and the

sound may stop for a few seconds. This symptom is common to the dual layer

discs and it is not the sign of unit trouble.

Region number of this unit is “2”.

DVD players and DVD video discs each have an assigned region number, and if

these numbers do not match, a disc cannot be played. This unit cannot play discs

other than those with a region number of “2” or “ALL”.

Notes:

¡Discs with a region number of “ALL” are not regionally restricted and can be

played in DVD players of all region numbers.

¡Discs with no displayed region number correspond one of the following.

1. Discs bearing a non-displayed region number but playable only on DVD

players with the same region number

2. Discs not regionally restricted and playable on DVD players of all region

numbers.

¡This unit cannot play discs recorded in TV signal formats other than PAL or

NTSC, even if their region number is “2” or “ALL”.

Disc type & logo mark

Disc size Maximum playing time

DVD Video

Video CD

Audio CD

5 inches

(12 cm)

5 inches

(12 cm)

5 inches

(12 cm)

Approx. 133 minutes (SS/SL)

Approx. 242 minutes (SS/DL)

Approx. 266 minutes (DS/SL)

Approx. 484 minutes (DS/DL)

SS=Single Sided, DS=Double Sided,

SL=Single Layer, DL=Dual Layer

Approx. 74 minutes

PA L NTSC

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ6

Before using the system (Power On)

This system is designed to convert DVD Video/Video CD/Audio CD sound into FM

signals (88.9 MHz or 88.3 MHz) and play them on the existing car stereo with FM.

Note: As to wiring, see page 38, “Basic connection 1”.

1. Setting up for operation

1. Load the discs into the magazine and install it into the changer.

The unit will start to check the discs in the magazine.

zSee page 3, “How to use the magazine”.

2. Turn on the car stereo and select FM band.

3. Tune the radio to either 88.9 MHz or 88.3 MHz (depending on frequency to

which the installer has set the FM modulator).

zSee page 38, “ Interference on 88.9 MHz ”.

4. Turn on the monitor and switch its mode to video.

Note:

Refer to the operation manuals of car stereo and monitor.

2. Power On and Play

1. Turn on the changer by pressing the Power button on the remote control.

After the initial screen is displayed, the play of first disc will start.

* If the unit has not finished checking the discs yet, “Checking disc . . .” will

appear after the initial screen. In this case, please wait until “Checking disc

. . .” disappears and the unit starts to play the first disc.

2. Adjust the sound level (volume, balance, tone, etc.) to your taste by using the

controls on the car stereo. Adjust the picture (brightness, contrast, tone, etc.)

using the controls on the monitor.

Notes:

¡When a magazine is inserted, the unit checks the disc in each tray to create a

Disc List. Until the Disc List is complete, “Checking disc . . .” is displayed.

To start play immediately without waiting for completion of the Disc List, press

the Play button ( ). The first disc will be played.

zSee page 23, “Displaying a Disc List”.

¡With DVDs, either the title menu screen or the DVD menu screen may be

displayed, depending on the disc. With video CDs, the PBC menu screen may

be displayed, depending on the disc.

zSee page 12, “Using the Title Menu”.

zSee page 13, “Using DVD Menus”.

zSee page 13, “Using the PBC (Playback Control) Function”.

¡Playback instructions differ according to disc type (DVD/Video CD/Audio CD).

zSee page 11, “Selecting a Disc”.

¡Refer to the operation manuals of car stereo and monitor.

When all wiring is completed, carry out the steps outlined below

before using the system.

■When the changer is connected directly to SANYO CD or

CD/Cassette Receiver with CD Changer Control model.

zSee page 39, “Basic connection 2”.

1. Load the discs into the magazine and install it into the changer.

The unit will start to check the discs in the magazine.

zSee page 3, “How to use the magazine”.

2. Turn on the monitor and switch its mode to video.

3. Turn on the car stereo and press its changer mode select button to switch its

mode to changer.

After the initial screen is displayed, the play of first disc will start.

* If the unit has not finished checking the discs yet, “Checking disc . . .” will

appear after the initial screen. In this case, please wait until “Checking disc

. . .” disappears and the unit starts to play the first disc.

4. Adjust the sound level (volume, balance, tone, etc.) to your taste by using the

controls on the car stereo. Adjust the picture (brightness, contrast, tone, etc.)

using the controls on the monitor.

Use the controls on the car stereo to turn on/off the changer and adjust the

sound level only. Use the attached remote control to operate the changer

except the above mentioned operations. (You can operate the changer with

the controls on the car stereo, but it depends on the car stereo.)

Notes:

¡When a magazine is inserted, the unit checks the disc in each tray to create a

Disc List. Until the Disc List is complete, “Checking disc . . .” is displayed.

To start play immediately without waiting for completion of the Disc List, press

the Play button ( ). The first disc will be played.

zSee page 23, “Displaying a Disc List”.

¡With DVDs, either the title menu screen or the DVD menu screen may be

displayed, depending on the disc. With video CDs, the PBC menu screen may

be displayed, depending on the disc.

zSee page 12, “Using the Title Menu”.

zSee page 13, “Using DVD Menus”.

zSee page 13, “Using the PBC (Playback Control) Function”.

¡Playback instructions differ according to disc type (DVD/Video CD/Audio CD).

zSee page 11, “Selecting a Disc”.

¡The power ON/OFF of the changer is switched by using the controls on the car

stereo. The power button (POWER) of the reomote control cannot be used.

zSee page 10, “Switching Off”.

¡The display of car stereo does not correspond to the control by the attached

remote control. (e.g. Repeat mark does not appear on the display of car stereo

when the changer is in repeat mode.)

¡Refer to the operation manuals of car stereo and monitor.

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ7

Remote control Audio CD Operation Screen

■How to load the batteries

1Press the battery cover

downward and pull.

Caution:

¡Do not use metal tweezers or anything similar to hold the battery since this

may cause short-circuiting.

¡Do not disassemble batteries, subject them to excessive heat or put them in

water since this may cause them to explode.

¡When the batteries have worn-out, they must be disposed of in a safe manner

that complies with all applicable laws.

■Range of remote control operation

During use, point the light emitter of the remote control toward the light receiver

on the remote control sensor.

The remote control can be used up to approx. 3 meters from the light sensor, in a

conical area spreading roughly 15° from the light sensor in any direction.

Note:

Battery wear can narrow the area where the remote control can be used. If this

occurs, change the batteries.

15°

Remote control

Remote

control

sensor

Remote control light receiver

Remote control light emitter

Approx. 3 m

The following screen is displayed during audio CD play.

qList of discs contained in

magazine

¡Tray containing the currently selected

audio CD: Tray number displayed in

black, background in light blue.

¡Tray containing audio CD not currently

selected: Tray number displayed in

black (background in gray).

¡Tray containing non-audio CD disc:

Tray number displayed in dark gray.

¡Tray not containing disc and tray

containing disc not playable by the unit:

Number not displayed.

wIlluminated during Disc Repeat

play.

eIlluminated during Track Repeat

play.

rIlluminated during A-B Repeat

play.

tIlluminated during Scan play.

yIlluminated during Random play.

uIlluminated during Program play.

iAudio output type display

Stereo: “L” and “R” illuminated.

Monaural (left): “L” illuminated.

Monaural (right): “R” illuminated.

oCurrent track number

!0 Running time display

¡Elapsed disc time or remaining disc time

displayed: “D” illuminated.

¡Elapsed track time or remaining track

time displayed: “T” illuminated.

!1 Illuminated during disc repeat,

track repeat, or A-B repeat play.

!2 Icon display

Play: “”

Stop/Suspend for resume playback: “”

Pause: “”

Fast forward: “”

Reverse: “”

When skip button ( ) is pressed:

“” (returns directly to “ ”)

When skip button ( ) is pressed:

“” (returns directly to “ ”)

123456789

DISC

RANDOM

TRACK

A-B

SCAN

PROGRAM

!2 e

!0!1

2Insert two AA alkaline batteries

with the +and _symbols

pointing correctly and replace

the cover.

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ8

q Power button

w Subtitle button

e Audio button

r Repeat button

t A-B repeat button

y Number buttons

u Clear button

i Cursor buttons

o Enter button

!0 Skip buttons

!1 Setup button

!2 Stop button

!3 Menu button

!4 Title button

!5 Time button

!6 Angle button

!7 Play mode button

!8 Search button

!9 Return button

@0 List button

@1 Disc select buttons

@2 Fast playback buttons

@3 Play button

@4 Pause button

Remote control light emitter

qPower button (POWER)

Switches unit power ON/OFF. (Pages 7,

10)

wSubtitle button (SUB TITLE)

Press during DVD play to switch among

subtitle languages recorded on the disc.

(Page 18)

eAudio button (AUDIO)

¡Press during DVD play to switch

among audio languages recorded on

the disc. (Page 17)

¡Press during video CD or audio CD

play to switch among audio output

types. (Page 17)

rRepeat button (REPEAT)

Press during play to switch repeat mode.

(Pages 21, 22)

tA-B repeat button (A-B)

Press during play to repeat play of a

desired section in a title or track. (Pages

22, 23)

yNumber buttons (0-9)

Use to input numbers during PBC

playback, search mode, program list

creation, or setup operation. (Pages 13,

16, 20, 32-35)

uClear button (CLEAR)

Use to clear numbers input by mistake.

(Pages 13, 16, 20, 32-35)

iCursor buttons ( , , , )

Use to select items on screen.

* Press ( ) during setup procedures to

return to the previous selection screen.

(Page 26)

oEnter button (ENTER)

Sets items selected on screen.

!0 Skip buttons ( , )

¡Use during play to advance/return to a

chapter or track. (Page 11)

¡Pressing ( ) while a DVD/video CD

is paused ( ) allows frame advance

play. (Page 15)

!1 Setup button (SET UP)

Press while stopped ( ) to go to the

setup screen. (Page 25)

!2 Stop button ( )

Press during play to stop play. (Page 10)

!3 Menu button (MENU)

¡Press during DVD play to go to the

DVD menu. (Page 13)

¡Press during PBC play to go to the

PBC menu. (Page 14)

!4 Title button (TITLE)

Press during DVD play to go to the title

menu screen (Page 12).

!5 Time button (TIME)

¡Press during DVD or video CD play to

display running time. Press while

running time is displayed to switch the

type of running time displayed. (Page

24)

¡Press during audio CD play (or during

pause) to switch the type of running

time displayed. (Page 25)

!6 Angle button (ANGLE)

Press during DVD play to switch the

angle. (Page 18)

* This operation is available only with

multi-angle recorded scenes.

!7 Play mode button (PLAY MODE)

¡Press during audio CD play to change

play modes (SCAN, RANDOM,

PROGRAM, normal play). (Page 19)

* When no program list has been created,

“PROGRAM” cannot be selected.

¡Press while an audio CD is stopped ( )

to go to the program list creation

screen. (Page 19)

!8 Search button (SEARCH)

Allows forward searching for a designated

title, chapter, track, or time during DVD or

video CD play and start of play. (Page 16)

!9 Return button (RETURN)

¡Use to return to the previous selection

screen during setup procedures and

others. (Page 26)

¡Press during PBC play to go to the PBC

menu. (Page 14)

@0 List button (LIST)

Displays a list of discs in a magazine. In

the disc list screen, you can select and

play desired discs or limit discs to be

played to those of a certain type. (Pages

23, 24)

@1 Disc select buttons ( , )

Selects and plays a desired disc. (Page

11)

@2 Fast playback buttons ( , )

¡Press during play to fast forward or

reverse. (Page 12)

¡Press while a DVD or video CD is

paused ( ) to begin slow play. (Page

15)

@3 Play button ( )

Use to begin play.

Also used to return to normal play from

modes such as fast forward/reverse play,

frame advance play or slow play.

@4 Pause button ( )

Press during play to stop video and audio

temporarily. Press again to resume play.

(Page 10)

Name & functions of each part

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ9

DVD

VCD

DVD

VCD

Switching Off

Press the power button ( ).

When switching the power on (beginning play) again, tune the FM radio receiver to

88.9MHz or 88.3MHz (the frequency selected with the FM modulator frequency

select switch), and press the power button ( ). Play will begin from the point

where it previously stopped.

Note:

When listening in other mode of car stereo (radio mode, CD mode, etc.), switch the

changer off. Leaving the changer on will produce noise heard on the radio, and

reception will suffer.

■When the changer is connected directly to SANYO CD or

CD/Cassette Receiver with CD Changer Control model.

zSee page 39, “Basic connection 2”.

Switch off the car stereo or switch the car stereo’s mode to other than

changer (radio mode, CD mode, etc.).

To switch on the changer (begin play) again, follow the procedures below.

Play will begin from the point where it previously stopped.

¡When the car stereo is off, switch on the car stereo (and press its changer

mode select button if it is not in changer mode).

¡When you are listening in other mode of car stereo (radio mode, CD mode,

etc.), press the changer mode select button of car stereo.

Notes:

¡The power button ( ) of the remote control cannot be used.

¡Refer to the operation manual of car stereo.

Press the stop button ( ).

Play stops (and the Resume Playback function becomes active).

Resume Playback Function

¡When the stop button ( ) is pressed during play, the unit stores the

position where play stopped. This is called the Resume Playback function.

When this function is operative, the unit displays “Resume . . .” for a DVD or

video CD. For an audio CD, the running time remains displayed when play is

stopped. When the play button ( ) is pressed, play resumes from the

point where it stopped.

¡The Resume Playback function is released in the following instances.

• The stop button ( ) is pressed again.

• A magazine is ejected and then reinserted.

To resume play, press the play button ( ).

If the Resume Playback function is operative, play resumes from the point where it

stopped.

If the Resume Playback function is not operative, the disc plays from the beginning.

Power button

Stopping Play

Stop button

Play button

Pause button

To Stop Play

Press the pause button ( ).

With an audio CD, the audio stops and the running time display blinks.

With a DVD or video CD, the video freezes (and the audio stops too).

Press the pause button ( ) again to resume play from the point where it stopped.

* On some occasions, video and/or audio may stop for an instant right after restarting

to play DVD or video CD. It is not the sign of unit trouble.

Pausing (Freezing)

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ10

DVD

VCD

DVD

VCD

Selecting a Disc

Press a disc select button ( or ).

To proceed to the next disc, press ( ).

To return to the previous disc, press ( ).

Notes:

¡Empty disc trays are skipped during disc changing.

¡Discs can also be selected by displaying a list of discs contained in a magazine.

zSee page 23, “Displaying a Disc List”.

¡Playback procedures differ according to the type of disc selected, as follows.

DVD:

When a disc is selected, operation is according to the disc side selected.

Operation after the disc is played also differs according to the disc.

For example, some discs are played again from the beginning. With others, the

title menu screen or DVD menu screen is displayed, and with others, play ends.

* If the title menu screen or DVD menu screen is displayed, select an item and

proceed to play.

zSee page 12, “Using the Title Menu”.

zSee page 13, “Using DVD Menus”.

* There is no DVD operation that selects the next disc when one disc has been

played (disc change).

* Also read the instructions included with the disc to be played.

Video CD / Audio CD:

When a disc is selected, play begins automatically from the first track.

After the last track is played, the next disc in the magazine is selected

automatically.

* With some PBC (playback control) -compatible video CDs, the menu screen is

displayed when the disc is selected. In this instance, select an item and proceed

to play. When the selected item is played, the menu screen is displayed again.

zSee page 13, “Using the PBC (Playback Control) Function”.

During play, press a skip button ( or ).

To advance to the next chapter or track, press ( ).

To return to the previous chapter or track, press ( ) twice.

* Pressing ( ) once returns to the beginning of the chapter or track in play.

Notes:

¡A chapter is a minor division of audio or images recorded on a DVD. A track is a

division of audio or images (video CDs only) recorded on a video CD or audio CD.

¡Some discs may include recorded chapters or tracks that prohibit these functions.

Disc select buttons

Advancing / Returning to a Chapter or Track

Skip buttons

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ11

DVD

VCD

During play, press a fast playback button ( or ).

To fast forward: Press ( ).

To fast reverse: Press ( ).

Each activation of a fast playback button ( or ) switches between 2x, 4x, 8x,

15x, and 30x fast forward and fast reverse speeds.

To decrease the fast forward or fast reverse speed...

Press the reverse fast playback button ( ) during fast forward, or press the forward

fast playback button ( ) during fast reverse. Each time the button is pressed, the

speed is reduced, and when pressed at a speed of 2x, normal play resumes.

Press the play button ( ).

Notes:

¡Audio is not output during fast forward or fast reverse play.

¡Some discs have locations where fast forward or fast reverse is not possible.

At such locations, normal play resumes automatically.

During play, press a fast playback button ( or ).

To fast forward: Press ( ).

To fast reverse: Press ( ).

Press the play button ( ).

Notes:

¡Audio is not output during fast forward or fast reverse play.

¡When fast play reaches the end of a disc, the next disc in the magazine is selected.

When fast reverse reaches the beginning of a disc, the first track begins to play.

Some DVDs divided into multiple titles include a recorded title menu. In

these instances, the title menu can be used to select and play a desired

title.

* A title is a major division of images or audio recorded on a DVD.

Notes:

¡Some discs do not include a recorded title menu, and some have menus

equivalent to DVD menus.

¡Because title menus are recorded on the disc, their content differs according to the

disc.

¡Depending on the disc, “Menu” or “Title” or the like may be displayed rather than

“Title Menu”. In step , above, some discs also display “Press the select button”

rather than “Press the enter button”.

¡Read the instruction manual for the disc used.

Fast Playback Using the Title Menu

DVD and Video CD

To resume normal play

Audio CD

To resume normal play

Fast playback buttons

Play button

During play, press the title button ( ).

The title menu is displayed.

Use the cursor buttons ( , , , ) to select a title you

wish to play and press the enter button ( ).

The selected title begins to play.

Title button

Cursor buttons

Enter button

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ12

DVD

VCD

Some DVDs include a recorded DVD menu.

Notes:

¡Some discs do not include a recorded DVD menu, and some have menus

equivalent to title menus.

¡Because DVD menus are recorded on the disc, their content differs according to

the disc. Menus may allow selection of the audio language, subtitle language, or

chapters, or the playing of a video description.

¡Depending on the disc, “Menu” or the like may be displayed rather than “DVD

Menu”. In step , above, some discs also display “Press the select button” rather

than “Press the enter button”.

¡Read the instruction manual for the disc used.

Press the menu button ( ).

Play resumes from the point where the DVD menu was displayed.

Note:

With some discs, play does not resume when the menu button is pressed. In these

instances, follow the procedures in the instruction manual included with the disc.

During play, PBC (playback control) -compatible video CDs display a

PBC menu recorded on the disc. This manual refers to use of a PBC

menu in dialog-based steps to playback as PBC playback.

qPress ( ).

“ – – 1 ” is displayed at the upper left of the screen.

wPress ( ).

The display at the upper left of the screen changes to “ – 1 0 ”.

Using DVD Menus

Using the PBC (Playback Control) Function (1)

During play, press the menu button ( ).

The DVD menu is displayed.

Select an item with the cursor buttons ( , , , ) and

press the enter button ( ).

In any additional selection screens, repeat step .

Completing or Quitting DVD Menu Operations

Menu button

Cursor buttons

Enter button

Using PBC Playback

While the PBC menu screen is displayed, use the number

buttons ( - ) to input the number of the item you wish to

view (or perform).

Example To input item number “10”

Press the enter button ( ).

For any additional selection screens, repeat steps and .

Menu button

Return button

Play button

Enter button

Stop button

Clear button

Number buttons

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ13

VCD

VCDD

Using the PBC (Playback Control) Function (2)

Notes:

¡Perform the next operation before the display at the upper left of the screen

(example: “ – – 1 ”) disappears.

¡If you make a mistake when entering a number, press the clear button ( ) to

clear the number entered.

¡PBC-compatible video CDs enter PBC playback automatically when played.

If you wish to stop PBC playback and begin normal play,

read “ Stopping PBC Playback and Beginning Normal Play ” below.

¡Because PBC menus are recorded on the disc, their content differs according to

the disc. Read the instruction manual included with the disc used.

Press the menu button ( ) or the return button ( ).

To display the PBC menu during PBC playback

Stopping PBC Playback and Beginning Normal Play

Press the stop button ( ).

Playback stops (“Resume . . .” is displayed, and the Resume Playback

function operates). zSee page 10, “ To Stop Play ”.

Press the stop button ( ).

“Resume . . .” disappears, and the Resume Playback function is released.

Press the stop button ( ).

“” at the upper right of the screen disappears.

PBC

Press the play button ( ).

Play begins.

Note:

Some content cannot be played if PBC playback is not performed.

Returning to PBC Playback From Normal Play

Press the stop button ( ).

Playback stops (“Resume . . .” is displayed, and the Resume Playback

function operates). zSee page 10, “ To Stop Play ”.

Press the stop button ( ).

“Resume . . .” disappears, and the Resume Playback function is released.

Press the stop button ( ).

“” at the upper right of the screen appears.

zSee step of “ Stopping PBC Playback and Beginning Normal Play ”

on this page.

PBC

4Press the play button ( ).

PBC playback begins.

If the PBC menu screen is not displayed, press the menu button ( ) to

display it.

DIGITAL VIDEO DISC & COMPACT DISC AUTO CHANGER

PBC

Resume...

Displayed only

during PBC

playback.

Disappears

after roughly

1 second.

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ14

DVD

VCD

DVD

VCD

Notes:

¡Audio is not output during frame advance play.

¡Depending on the disc or its running position, the (“prohibited” logo) is

displayed, and frame advance play cannot be performed.

¡Images on some discs may be corrupted during frame advance play.

¡The reverse skip button ( ) is inactive (frame reverse play is not possible).

Notes:

¡Audio is not output during slow play.

¡Depending on the disc or its running position, the (“prohibited” logo) is

displayed, and slow play cannot be performed.

¡Images on some discs may be corrupted during slow play.

Using Frame Advance Play and Slow Play

Fast playback buttons

Skip button

Play button

Pause button

Using Frame Advance Play

Press the pause button ( ) to freeze the picture.

zSee page 10, “ Pausing (Freezing) ”.

Press the forward skip button ( ).

Press the button again to play the images one frame at a time.

Press the pause button ( ) to freeze the picture.

zSee page 10, “ Pausing (Freezing) ”.

Press the forward fast playback button ( ).

Slow play begins.

To return to normal play

Press the pause button ( ) or the play button ( ).

Using Slow Play

Press either fast playback button ( or ) to select the slow

play speed.

Each activation of a button adjusts the speed through four steps (1/16

1/8 1/4 1/2). Pressing the reverse fast playback button ( ) at 1/16

speed freezes the picture.

To return to normal play

Press the play button ( ).

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ15

DVD

VCD

Using Title Search, Chapter Search, Track Search, and Time Search

Play can be started from a designated title, chapter, or track. An

elapsed time value can also be entered, and play can be started from

that point.

¡DVD play information display (Example)

¡Video CD play information display (Example)

¡With video CD

¡With DVD

Notes:

¡The play information display disappears after approximately 5 seconds. Perform the

next operation before the display disappears.

¡You can use the left/right cursor buttons ( , ) to select an item in step .

¡You can use the up/down cursor buttons ( , ) to input numbers in step .

:Press to increase numbers by 1.

:Press to decrease numbers by 1.

¡In step , press the clear button ( ) to clear numbers already input at the

position.

¡With some discs, the (“prohibited” logo) is displayed, and these searches cannot

be performed.

Search button

Cursor buttons

Number buttons

Clear button

Enter button

During play, press the search button ( ).

Current play information as indicated below is displayed at the top of the

screen for approximately 5 seconds.

While play information is displayed, use the search button ( )

to select a search index (title number, chapter number, elapsed

time of title, track number, elapsed time of track).

When the search button is pressed, the cursor moves as follows.

Search T : 01 C : 005 Time : 0 : 23 : 41

Search T : 03 Time : 0 : 01 : 55

Title number

Chapter number

Elapsed time of title

Track number Elapsed time of track

Track number Elapsed time of track “hours”

Elapsed time of track “minutes”Elapsed time of track “seconds”

Title number Chapter number Elapsed time of title “hours”

Elapsed time of title “minutes”Elapsed time of title “seconds”

Use the number buttons ( - ) to enter the title number,

chapter number, elapsed time of title, track number, or elapsed

time of track at the location you wish to hear or view.

Time : 1 : – – : – –

Red

Time : 1 : 00 : – –

Red

Time : 1 : 21 : – –

Red

Time : 1 : 21 : 00

Red

Time : 1 : 21 : 05

Red

Press the enter button ( ).

Play begins from the designated location.

qPress ( ).

“1” is input at the “hours” position of elapsed title

time.

wPress the search button ( ) or the cursor button

() to move the cursor to the “minutes” location.

ePress ( ), then press ( ).

“21” is input at the “minutes” position of elapsed

title time.

rPress the search button ( ) or the cursor button

() to move the cursor to the “seconds” location.

tPress ( ).

“05” is input at the “seconds” position of elapsed

title time.

Example Select the elapsed time of title “hours” in step

to begin play from the location “1:21:05”.

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ16

DVD

VCD

Some DVD discs include multiple audio languages. In these instances,

you can select a preferred audio language as follows.

Notes:

¡This operation is only possible with a disc storing multiple audio languages.

¡The audio language can also be changed from a DVD menu (zsee page 13) or

the setup screen (zsee page 27). With some discs, the foregoing procedures

cannot be used to switch the audio language. In these instances, switch the audio

language from the DVD menu or setup screen.

* You can switch the audio language from the setup screen when the language is

included in both the disc and the setup.

¡The up/down cursor buttons ( , ) can also be used to select an audio

language in step .

Switching the Audio Language

During play, press the audio button ( ).

The audio language currently selected is displayed at the top of the

screen for approximately 5 seconds.

While the audio language is displayed, use the audio button

() to select your preferred audio language.

When you press the audio button, the audio language switches within the

list of audio languages recorded on the disc.

Enter button

Cursor buttons

Audio button

Press the enter button ( ).

* Even if the enter button is not pressed, the audio language will switch

automatically approximately 5 seconds after an audio language is selected

(after the audio language display disappears).

The audio output method (stereo, monaural left, monaural right) can be

changed during video CD or audio CD play.

Switching the Audio Output Method

Audio button

Enter button

Audio language display example

Audio 1. English Dolby Digital

Video CD

Audio CD

During play, press the audio button ( ).

The output method currently selected is displayed at the top of the screen

for approximately 5 seconds.

During play, press the audio button ( ).

When the audio button is pressed, the output method switches as shown below.

Output method display example

Audio L/R

While the output method is displayed, use the audio button

() to select an output method.

When the audio button is pressed, the output method switches as shown

below.

Press the enter button ( ).

* Even if the enter button is not pressed, the output method will switch

automatically approximately 5 seconds after an output method is selected

(after the output method display disappears).

Stereo (“L/R”) Monaural right (“R/R”) Monaural left (“L/L”)

Stereo (“LR”) Monaural left (“L”) Monaural right (“R”)

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ17

DVDDVD

Some DVD discs include recorded subtitles. In these instances, you

can select display or non-display of subtitles.

Some discs also include multiple recorded subtitle languages. In these

instances, you can select a preferred language.

Notes:

¡Subtitle language can only be switched when using a disc storing multiple subtitle

languages.

¡Some discs do not allow non-display of subtitles.

¡The subtitle language can also be changed from a DVD menu (zsee page 13)

or the setup screen (zsee page 28). With some discs, the foregoing procedures

cannot be used to switch the subtitle language. In these instances, switch the

subtitle language from the DVD menu or setup screen.

* You can switch the subtitle language from the setup screen when the language is

included in both the disc and the setup.

¡The up/down cursor buttons ( , ) can also be used to select a subtitle

language in step .

Switching the Subtitle Language

During play, press the subtitle button ( ).

The subtitle language currently selected is displayed at the top of the screen

for approximately 5 seconds.

While the subtitle language is displayed, use the subtitle button

() to select a preferred subtitle language or “Off” (when

removing subtitles).

When you press the subtitle button, the subtitle language switches within the

list of subtitle languages recorded on the disc.

Enter button

Cursor buttons

Subtitle button

Press the enter button ( ).

* Even if the enter button is not pressed, the subtitle language will switch

automatically approximately 5 seconds after a subtitle language is selected

(after the subtitle language display disappears).

Subtitle language display example

Subtitle 02. English

Some DVD discs store the same scene as viewed from multiple angles

(multi-angle recording). In these instances, you can switch and view a

scene from a preferred angle.

Notes:

¡This operation can be performed only in scenes recorded with multiple angles.

¡The total number of angles recorded differs according to both discs and scenes.

¡The angle can be switched during normal play.

The angle cannot be switched during slow play or frame advance play.

¡When a scene allowing angle switching occurs, the angle will be switched

automatically to the angle number selected in step .

¡The up/down cursor buttons ( , ) can also be used to select an angle

number in step .

Switching the Angle

During play of a scene recorded from multiple angles, press the

angle button ( ).

The angle number currently selected is displayed at the top of the screen for

approximately 5 seconds.

While the angle number is displayed, use the angle button ( )

to select a preferred angle number.

When you press the angle button, the angle number switches.

Angle button

Enter button

Cursor buttons

Press the enter button ( ).

* Even if the enter button is not pressed, the angle will switch automatically

approximately 5 seconds after an angle number is selected (after the angle

number display disappears).

Angle number display example

Angle 1/4

Currently selected angle number /

Total number of recorded angles

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ18

CD CD

Note:

You cannot switch to if a program list has not been created.

PROGRAM

Play mode button

■Scan play repeats a function in which track introductions on a disc

are played for approximately 10 seconds and play then moves to the

next track.

■Random play plays tracks on the disc in a non-standard order, and

when all tracks have been played, the next disc in the magazine is

selected.

■Program play plays tracks on a disc in an order recorded in a

program list.

* Program play cannot be used if a program list has not been created.

zSee “Creating a Program List” on this page.

* When the last track in a program list ends, the unit stops ( ).

Using Scan Play, Random Play, and Program Play

You can play track numbers on a disc in a desired order by storing them

in a program list in the same order (This is called the program play).

zSee “Using Scan Play, Random Play, and Program Play” on this page.

Store track numbers in play order as follows.

Creating a Program List (1)

During play, press the play mode button ( ) to illuminate display of

your preferred play mode ( , , ).

When you press the play mode button, the mode switches as follows.

PROGRAMRANDOMSCAN

zSee page 8, “Audio CD Operation Screen”.

RANDOM Normal playPROGRAMSCAN

Press the stop button ( ) to stop play.

Press the play mode button ( ).

The program list creation screen appears.

Play mode button

Play button

Return button

Stop button

Clear button

Number buttons

Cursor buttons

Enter button

1 2 3 456789

DISC

RANDOM

TRACK

A-B

SCAN

PROGRAM

Last Clear

Track Program

All Clear

:Play(Program Play)

CLEAR:Track No.Clear

ENTER:CFMD

Direction:Move Cursor

0~9:Track No.Input

– –

Program list

Stored track

numbers are

displayed here.

zSee page 20.

List of discs contained in magazine (Example)

zSee page 8.

Input number

display

Select when

inputting a track

number (red when

selected).

zSee page 20.

Select to clear the

last track number in

a program list

(background is

yellow when

selected).

zSee page 21.

Select to clear all

track numbers in a

program list

(background is

yellow when

selected).

zSee page 21.

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ19

CDCD

Note:

Perform input number display / / procedures as

follows.

• For input number display [\ ..

• For [\ ...................

• For input number display [.........

• For input number display \,

Input number display \\

All ClearLast Clear

All Clear

All ClearLast Clear

Last Clear

All ClearLast Clear

Note:

If you enter an incorrect number, continue by simply entering the

correct number.

Example: When “10” was input instead of ‘12’, input ‘12’.

Example: When “12” was input instead of ‘08’, input ‘08’.

* The input number display will show “– 8”.

wPress ( ).

The input number display shows “2” next to “1”.

Input track numbers with the number buttons ( - ).

Press the enter button ( ).

* The program list displays “12”.

Repeat steps and to store track numbers in the desired

order of play (up to 20 numbers can be stored).

When storage is complete, press the play button ( ).

Tracks are played in the order stored in the program list.

During program play, the indicator on the operation screen

lights.

zSee page 8, “Audio CD Operation Screen”.

When the last track in the program list ends, the unit stops ( ).

PROGRAM

Notes:

¡To interrupt program list creation, press the return button ( ). The display will

return to the operation screen. After that press the play button ( ) to continue

the playback from where it was interrupted.

¡Track numbers not recorded on a disc cannot be stored.

¡You can use the up/down cursor buttons ( , ) to input track numbers in step

. When the button is pressed the numbers in the input number dispaly will

increase or decrease accordingly.

¡The contents stored in a program list will be cleared when the following occur.

•Power to the unit is disconnected

•A magazine is ejected

•A different disc in a magazine is selected.

Creating a Program List (2)

1 2 3 8

DISC

TRACK

Last Clear

Track Program

All Clear

– 1

1 2 3 8

DISC

TRACK

Last Clear

Track Program

All Clear

1 2

RANDOM

A-B

SCAN

PROGRAM

:Play(Program Play)

CLEAR:Track No.Clear

ENTER:CFMD

Direction:Move Cursor

0~9:Track No.Input

qPress ( ).

The input number display shows “1”.

Example To input “12”

3 4

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ20

DVD

VCD

Creating a Program List (3)

Use one of the following two methods.

¡While the program list creation screen is displayed, press the clear button ( ).

¡Clearing using the screen

qOn the program list creation screen, select .

zSee pages 19, 20, step .

wPress the enter button ( ).

Last Clear

To clear the last track number in a program list

qIn the program list creation screen, select .

zSee pages 19, 20, step .

wPress the enter button ( ).

All Clear

To clear all track numbers in a program list

Repeat button

Enter button

Cursor buttons

■DVD

This function allows title repeat (repeating a playing title) and chapter repeat

(repeating a playing chapter).

* Some discs do not allow repeat play.

■Video CD, Audio CD

This function allows disc repeat (repeating an entire disc) and track repeat

(repeating a playing track).

Using Repeat Play (1)

¡DVD repeat mode display

During play, press the repeat button ( ).

The repeat mode is displayed at the top of the screen for approximately 5

seconds, as shown below.

* The mode with the yellow background is the mode currently selected.

Use the repeat button ( ) to select the repeat type (title,

chapter, disc, or track).

When the repeat button is pressed, the cursor (yellow) moves.

Repeat Off Title Chapter

¡Video CD repeat mode display

Repeat Off Disc Track

Notes:

¡You can use the left/right cursor buttons ( , ) for selection in step .

¡To remove the repeat mode display immediately after step , press the enter

button ( ).

¡With some discs and scenes, the (“prohibited” logo) is displayed, and repeat

play cannot be used.

* In some instances, repeat play cannot be used even though the (“prohibited”

logo) is not displayed.

DVD and Video CD

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ21

DVD

VCD

DVD

VCD

Using Repeat Play (2)

Select “Off” in step .

To return to normal play

During play, press the repeat button ( ) to illuminate the indicator for

your preferred repeat mode ( , ).

When the repeat button is pressed, the repeat mode switches as follows.

TRACKDISC

zSee page 8, “Audio CD Operation Screen”.

TRACK Normal play

DISC

A-B repeat button

This function allows repeating of a designated portion.

Using A-B Repeat Play Mode (1)

When you reach the scene or song portion where you wish to

begin repeat play, press the A-B repeat button ( ) (start point

setting).

DVDs and Video CDs:

“” is displayed at the top of the screen.

Audio CDs:

The “ ” indicator lights.

zSee page 8, “Audio CD Operation Screen”.

A-

When you reach the scene or song portion where you wish to

end repeat play, press the A-B repeat button ( ) (end point

setting).

DVDs and Video CDs:

The display changes to “ ”.

Audio CDs:

The display changes to “ ”.

A-B

Notes:

¡A-B repeat play can be designated in a range within the same title (DVD) or the

same track (video CD or audio CD). If the title or track ends before step is

performed, the end point of the title or track becomes the end point for A-B repeat

play.

¡“ ” indicator of the DVD or video CD disappears after approximately 1

second.

When play returns to the start point for repeat play, the “ ” indicator is

displayed for approximately 1 second.

A-B

Audio CD

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ22

DVD

VCD

DVD

VCD

Using A-B Repeat Play Mode (2)

Press the A-B repeat button ( ).

DVDs and Video CDs:

“” is displayed at the top of the screen for approximately 1 second.

Audio CDs:

The “ ” indicator goes off.

A-B

A-B Off

To return to normal play

Return button

List button

Cursor buttons

Enter button

Play button

You can display a list of discs contained in a magazine, check disc

types (DVD, video CD, audio CD), or select and play a desired disc.

You can also limit the type of discs played (DVD, video CD, audio CD).

Displaying a Disc List (1)

Press the list button ( ).

The disc list screen appears.

DVD Video CD CDAudio

Disc List

Disc type select

1 . Audio CD

2 . Audio CD

3 .

–

4 . DVD DRAGON

5 . DVD FUN

6 .

–

7 .

–

8 . Video CD

9 . DVD SPACE

1 0 . Video CD

Disc List

Magazine tray numbers and the

types of disc in each tray are

indicated.

In this example,

¡Tray 1 and tray 2 contain audio

CDs.

¡Tray 4, tray 5, and tray 9 contain

DVDs.

* “DRAGON”, “FUN”, and

“SPACE” are volume labels

stored on discs. A disc where

no volume label is stored is

indicated only as “DVD”.

¡Tray 8 and tray 10 contain video

CDs.

Notes:

Trays containing discs that the

unit cannot play are indicated by

“–”.

Trays not containing discs are

indicated by “–”, and their

background color is gray.

Trays not yet checked for discs

are indicated only by tray number.

Only discs appearing with the “ ”

indicator can be played.

In this example, the “ ” indicator

does not appear with “Video CD”, and

video CDs cannot be played.

zSee page 24,

To set the type of disc to be played .

About Disc Lists

When you insert a magazine, the unit

checks the discs in each tray and creates a

disc list. If you press the play button ( )

during list creation, the procedure is

interrupted and the first disc begins to play.

A tray containing disc not checked when

disc list creation was interrupted is labeled

with only a tray number until the tray is first

selected.

Disc list screen (Example)

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ23

DVD

VCD

DVD

VCD

Displaying a Disc List (2)

Press the list button ( ) or the return button ( ).

To stop screen display of a Disc List

qUse the cursor buttons ( , , , ) to select the tray containing the

desired disc from the disc list. The background of the selected tray changes to

yellow.

wPress the enter button ( ).

The selected disc is played.

To select and play a desired disc

qUse the cursor buttons ( , , , ) to select the type of disc for which

the setting is to be changed (DVD, video CD, audio CD).

The background color indicating the selected disc type changes to yellow.

wPress the enter button ( ).

When the enter button is pressed, the “ ” indicator switches between display

and non-display.

To designate play, display the “ ” indicator.

To designate non-play, remove the “ ” indicator.

ePress the list button ( ) or the return button ( ).

Discs not appearing with the “ ” indicator are skipped during play.

Note:

These settings are cancelled when a magazine is ejected.

When a magazine is next inserted, all three indicators appear with the “ ” indicator.

To set the type of disc to be played

Displaying Running Time

Time button

Return button

Press the time button ( ).

Running time is displayed at the top of the screen for approximately 5 seconds.

Note:

When the return button ( ) is pressed, the running time display disappears.

DVD

When the time button ( ) is pressed during running time display, the

type of running time displayed switches as follows.

Video CD

When the time button ( ) is pressed during running time display, the

type of running time displayed switches as follows.

DVD Video CD CDAudio

Disc type select

Yellow

Disc List

1 . Audio CD

2 . Audio CD

3 .

–

4 . DVD DRAGON

5 . DVD FUN

6 .

–

7 .

–

8 . Video CD

9 . DVD SPACE

1 0 . Video CD

Yellow

Chapter Play 0 : 01 : 48 (Elapsed chapter time)

(Remaining chapter time)

(Elapsed title time)

(Remaining title time)

Chapter Remain 0 : 03 : 26

Title Play 0 : 24 : 50

Title Remain 1 : 25 : 41

Tr a c k Play 0 : 00 : 12 (Elapsed track time)

(Remaining track time)

(Elapsed disc time)

(Remaining disc time)

Track Remain 0 : 04 : 45

Disc Play 0 : 06 : 32

Disc Remain 0 : 41 : 15

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ24

You can select the type of running time display shown on the audio CD

operation screen.

Switching the Type of Running Time Display

Time button

123456789

DISC

RANDOM

TRACK

A-B

SCAN

PROGRAM

Running time display

When elapsed track

time or remaining track

time is shown, “T” is

displayed.

When elapsed disc

time or remaining disc

time is shown, “D” is

displayed.

Performing Basic Operations for Setup Changes (1)

Return button

Play button

Stop button

Setup button

Cursor buttons

Enter button

Press the time button ( ) during play (or while paused).

When the button is pressed, the type of running time display switches as follows.

Elapsed track time Remaining track time

Elapsed disc timeRemaining disc time

Operation screen

Press the stop button ( ) to stop play.

Press the setup button ( ).

The setup screen is displayed.

Use the up/down cursor buttons ( , ) to select an item for

change of settings, and press the enter button ( ).

A setup screen for the selected item appears.

Change the settings.

In step , when “ ” was selected, zsee page 26.

when “ ” was selected, zsee page 27.

when “ ” was selected, zsee page 28.

when “ ” was selected, zsee page 29.

when “ ” was selected, zsee page 30.

when “ ” was selected, zsee page 31.

when “ ” was selected, zsee page 35.

when “ ” was selected, zsee page 36.

Player Language

OSD Message

Parental

Display

Digital Output

Subtitle Language

Audio Language

DVD Menu Language

Set up

DVD Menu Language

Audio Language

Subtitle Language

Digital Output

Display

Parental

OSD Message

Player Language

Original

LPCM

16 : 9 Widescreen

English

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ25

Performing Basic Operations for Setup Changes (2)

Note:

Settings are maintained until changed.

Press the return button ( ) or the left cursor button ( ).

To return to the previous selection screen during setup change operations

qPress the setup button ( ).

The screen with “ ” reappears.

wPress the play button ( ).

Play begins.

Notes:

¡With video CDs and audio CDs, the Resume Playback function operates, and

play begins from the point where it stopped.

¡With DVDs, the disc plays from the beginning.

* If setup settings have not been changed, the Resume Playback function

operates, and play begins from the point where it stopped.

To end or interrupt setup changes

You can change the display language for DVD menus (zsee page 13,

“Using DVD Menus”) stored on a DVD.

Changing the DVD Menu Language (1)

Enter button

Cursor buttons

Follow steps and in “Performing Basic Operations for

Setup Changes” (zsee page 25) to display the setup screen.

Use the up/down cursor buttons ( , ) to select

“”, and press the enter button ( ).

The DVD menu language setup screen is displayed.

DVD Menu Language

Japanese

English

Chinese

Italian

French

German

Korean

Original

The current setting is

the language with a

yellow background.

Setup

1 2

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ26

You can change the DVD audio language.

Changing the Audio Language (1)Changing the DVD Menu Language (2)

Use the up/down cursor buttons ( , ) to select a desired

language and press the enter button ( ).

The setup screen reappears (with the “DVD Menu Language” setting

changed to the selected language).

Notes:

¡When set to “ ”, a disc is played in the original language on the disc.

¡The languages stored on discs vary. Some discs may contain only 1 language.

¡If a language not stored on a disc is selected, any language stored on the disc may

be played.

¡Read the instructions included with the disc played.

Original

Use the up/down cursor buttons ( , ) to select

“” and press the enter button ( ).

The audio language setup screen is displayed.

Audio Language

Enter button

Cursor buttons

Set up

DVD Menu Language

Audio Language

Subtitle Language

Digital Output

Display

Parental

OSD Message

Player Language

Original

LPCM

16 : 9 Widescreen

English

Japanese

“ ” has been selected

on the DVD Menu Language

setup screen.

Japanese

Audio Language

Japanese

English

Chinese

Italian

French

German

Korean

Original

The current setting is

the language with a

yellow background.

SetupSetup

Follow steps and in “Performing Basic Operations for

Setup Changes” (zsee page 25) to display the setup screen.

11 2

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ27

Changing the Audio Language (2)

Use the up/down cursor buttons ( , ) to select a desired

language and press the enter button ( ).

The setup screen reappears (with the “Audio Language” setting changed to

the selected language).

Notes:

¡When set to “ ”, a disc is played in the original language on the disc.

¡The languages stored on discs vary. Some discs may contain only 1 language.

¡If a language not stored on a disc is selected, any language stored on the disc may

be played.

¡Read the instructions included with the disc played.

¡The audio language can be switched using the DVD menu (zsee page 13) or

the audio button (zsee page 17), but if power is disconnected and play is then

begun again, play will occur in the language designated during setup.

* If the audio language is switched with the DVD menu or audio button, setup

settings do not change.

* When a disc is played after setup settings are changed, the disc is played from

the beginning. If you wish to switch the audio language during disc play, use the

audio button.

Original

You can change the subtitle language of a DVD.

You can also remove subtitles.

Changing the Subtitle Language (1)

Use the up/down cursor buttons ( , ) to select

“” and press the enter button ( ).

The subtitle language setup screen is displayed.

Subtitle Language

Enter button

Cursor buttons

Set up

DVD Menu Language

Audio Language

Subtitle Language

Digital Output

Display

Parental

OSD Message

Player Language

Chinese

Original

LPCM

16 : 9 Widescreen

English

“ ” has been

selected on the Audio

Language setup screen.

Chinese

Subtitle Language

Original

Japanese

English

Chinese

Italian

German

Korean

Off

French

The current setting is

the language with a

yellow background.

SetupSetup

Follow steps and in “Performing Basic Operations for

Setup Changes” (zsee page 25) to display the setup screen.

11 2

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ28

Changing the Subtitle Language (2)

Use the up/down cursor buttons ( , ) to select a preferred

subtitle language or “Off” (when hiding subtitles) and press the

enter button ( ).

The setup screen reappears (with the “Subtitle Language” setting changed

to the selected language or “Off”).

* When DTS-format audio (signals) are played, connect a digital audio device

equipped with a DTS decoder and select “Bitstream”. If set to “LPCM”, audio will not

be output.

Notes:

¡When set to “ ”, a disc is played in the original language on the disc.

¡The languages stored on discs vary. Some discs do not contain subtitles, and

some contain only 1 language.

¡If a language not stored on a disc is selected, any language stored on the disc may

be played.

¡Some discs do not allow removal of subtitles.

¡Read the instructions included with the disc played.

¡The subtitle language can be switched using the DVD menu (zsee page 13) or

the subtitle button (zsee page 18), but if power is disconnected and play is

then begun again, play will occur in the language designated during setup.

* If the subtitle language is switched with the DVD menu or subtitle button, setup

settings do not change.

* When a disc is played after setup settings are changed, the disc is played from

the beginning. If you wish to switch the subtitle language during disc play, use the

subtitle button.

Original

You can change the audio output from the optical digital audio output

terminal of the unit. Use the correct settings for any digital audio

devices connected.

Changing the Digital Output (1)

LPCM

Bitstream

Select this option when a digital audio device not equipped with a

Dolby digital decoder is connected. When audio (signals) in Dolby

digital format are played, they are converted to linear PCM format

before output.

Select this option when a digital audio device equipped with a

Dolby digital decoder is connected. When audio (signals) in Dolby

digital format are played, they are output without modification in

Dolby digital format.

Use the up/down cursor buttons ( , ) to select

“” and press the enter button ( ).

The digital output setup screen is displayed.

Digital Output

Enter button

Cursor buttons

Set up

DVD Menu Language

Audio Language

Subtitle Language

Digital Output

Display

Parental

OSD Message

Player Language

Original

Italian

LPCM

16 : 9 Widescreen

English

“ ” has been

selected on the Subtitle

Language setup screen.

Italian

Digital Output

Bitstream

LPCM

The current setting is

the one with a yellow

background.

SetupSetup

Follow steps and in “Performing Basic Operations for

Setup Changes” (zsee page 25) to display the setup screen.

11 2

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ29

Changing the Digital Output (2)

Use the up/down cursor buttons ( , ) to select the audio

output (LPCM/Bitstream) and press the enter button ( ).

The setup screen reappears (with the “Digital Output” setting changed to the

selected audio output).

Caution

Improper settings may cause noise harmful to the ears or damaging to speakers.

Read the instructions for the digital audio device connected.

Monitors include two types: normal monitors with a 4:3 horizontal-to-

vertical screen ratio, and wide monitors with a 16:9 ratio. Some DVDs

also store multiple aspect ratios such as one or more of the 3 described

below. Set an aspect ratio that works with the monitor you are using.

Changing the Aspect Ratio (Vertical/Horizontal Screen Image Ratio) (1)

4 : 3 Letter Box

4 : 3 Pan & Scan

16 : 9 Widescreen

Select this option when you are using a normal monitor.

Any 16:9 wide image DVDs played will be vertically

compressed (leaving black bands at the top and bottom of

the screen).

Select this option when you are using a normal monitor.

Any 16:9 wide image DVDs played will be cropped at the

left and right.

Select this option when you are using a wide monitor. Any

16:9 wide image DVDs played will be displayed at full size.

* To display images at full size, set your monitor to “Full” or

the corresponding mode. For details, refer to your monitor

manual.

Use the up/down cursor buttons ( , ) to select “ ”

and press the enter button ( ).

The display setup screen is displayed.

Display

Enter button

Cursor buttons

Set up

DVD Menu Language

Audio Language

Subtitle Language

Digital Output

Display

Parental

OSD Message

Player Language

Original

Bitstream

16 : 9 Widescreen

English

“ ” has been

selected on the Digital Output

setup screen.

Bitstream

Display

4 : 3 Pan&Scan

16 : 9 Widescreen

4 : 3 Letter Box

The aspect ratio with a

yellow background is the

current setting.

SetupSetup

Follow steps and in “Performing Basic Operations for

Setup Changes” (zsee page 25) to display the setup screen.

11 2

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ30

Some DVDs store parental levels. These discs allow you to restrict

viewing and listening according to a parental level set with the player

(this unit).

Changing Parental Settings (1)

Use the up/down cursor buttons ( , ) to select

“” and press the enter button ( ).

The password registration screen is displayed.

Parental

Use the up/down cursor buttons ( , ) to select an aspect

ratio (4:3 Letter Box, 4:3 Pan & Scan, 16:9 Widescreen) and

press the enter button ( ).

The setup screen reappears (with the “Display” setting changed to the

aspect ratio selected).

Notes:

¡If an aspect ratio not stored on a disc is selected, any aspect ratio stored on the

disc may be used during play. Some discs also contain only 1 aspect ratio. Check

the instructions for the disc being played.

¡When using a normal monitor, a setting of “16:9 Widescreen” may produce an

unnatural image. When using a normal monitor, select either “4:3 Letter Box” or

“4:3 Pan & Scan”.

¡When a wide monitor is set to “Full” or an equivalent mode and this unit is set to

“4:3 Letter Box” or “4:3 Pan & Scan”, the image will appear unnatural. When

viewing a “4:3 Letter Box” or “4:3 Pan & Scan” image on a wide monitor, set the

wide monitor to a mode producing a 4:3 aspect ratio on screen (for example,

“Normal mode”, though names differ among manufacturers).

Changing the Aspect Ratio (Vertical/Horizontal Screen Image Ratio) (2)

When using this unit for the first time

You can follow the steps below to register a password and set parental

levels.

Return button

Cursor buttons

Setup button

Enter button

Clear button

Number buttons

Set up

DVD Menu Language

Audio Language

Subtitle Language

Digital Output

Display

Parental

OSD Message

Player Language

Original

LPCM

4 : 3 Pan&Scan

English

“ ” has

been selected on the Display

setup screen.

4 : 3 Pan&Scan

Password

Please input new password.

– – – –

1234567890

When you input numbers in step ,

the “–” change to “ ”.

SetupSetup

Follow steps and in “Performing Basic Operations for

Setup Changes” (zsee page 25) to display the setup screen.

11 2

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ31

Level

The level with the yellow

background is the current

setting.

Password

Please input password again

for confirmation.

– – – –

1234567890

Changing Parental Settings (2)

Use the number buttons ( - ) to input a password (4-digit

number).

A password re-entry screen is displayed.

Input the password input in step .

A message screen is displayed.

Press the enter button ( ).

A parental menu screen is displayed.

If you make a

mistake entering

numbers and

press the clear

button ( ), all

numbers input

will be cleared.

Use the up/down cursor buttons ( , ) to select “ ”

and press the enter button ( ).

A level setting screen is displayed.

Level

¡When “8” is set, all discs can be played. Progressing from “8” towards

“1”, viewing and listening restrictions become increasingly strict. For

example, if “4” is set, discs at parental levels “5” through “8” cannot be

played.

¡Refer to the following table regarding how parental levels based on

the MPAA (Motion Picture Association of America) rating system

correspond to parental levels in this unit.

This Unit

“7”

“6”

“4”

“3”

“1”

MPAA Rating System

“NC-17” : No one 17 and under admitted

“R” : Restricted

“PG-13” : Parents strongly cautioned

“PG” Parental guidance suggested

“G” : General audiences

Password

Password has been set.

This password is necessary

when you change parental setting.

Please remember this password.

Please press “Enter” key.

Parental

Password change

Level

Setup

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ32

Use the up/down cursor buttons ( , ) to select a level and

press the enter button ( ).

The parental menu screen reappears.

Press the return button ( ) or the left cursor button ( ) to return to the

setup screen. The “Parental” setting will have changed to the level selected

in step .

Changing Parental Settings (3)

Notes:

¡Do not forget your registered password.

The password is needed to change your parental settings.

Some discs storing a parental level cannot be played unless a password is input.

¡This unit cannot restrict play of discs not containing a parental level. Parental

levels are often printed on the disc package or the like.

¡Methods of audiovisual restriction differ among discs but include complete

disabling of play and skipping of offensive scenes. For details, read the instructions

of the disc being played.

¡If an attempt is made to play a disc that cannot be played according to the parental

level set with the unit, a prompt screen is displayed and asks whether you wish to

change the parental level in the unit temporarily and play the disc. Follow the

instructions on the screen to complete the operation.

¡A password can also be input by using the left/right cursor buttons ( , ) to

select numbers at the bottom of the screen and then pressing the enter button

( ).

Use the up/down cursor buttons ( , ) to select

“” and press the enter button ( ).

The password input screen is displayed.

Parental

Use the number buttons ( - ) to enter the registered

password.

The parental menu screen is displayed.

If you make a

mistake entering

numbers and

press the clear

button ( ), all

numbers input

will be cleared.

Set up

DVD Menu Language

Audio Language

Subtitle Language

Digital Output

Display

Parental

OSD Message

Player Language

Original

LPCM

16 : 9 Widescreen

English

“ ” has been selected

on the level setting screen.

Password

Please input password

– – – –

1234567890

When you input numbers in step ,

the “–” change to “ ”.

Parental

Password change

Level

Setup

Changing the parental level

Follow steps and in “Performing Basic Operations for

Setup Changes” (zsee page 25) to display the setup screen.

11 2

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ33

Parental

Password change

Level

Change password

Please input new password.

– – – –

1234567890

Change password

Please input password again

for confirmation.

– – – –

1234567890

Note:

If you forget your password...

Enter “5534” on the password input screen.

You can then perform the following procedures.

To change the password, follow the instructions in “ Changing the password ”

(below). In this instance, enter “5534” in step .

Changing Parental Settings (4)

Use the up/down cursor buttons ( , ) to select “ ”

and press the enter button ( ).

The level setting screen is displayed.

zSee page 32, step , “ When using this unit for the first time ”.

Level

Use the up/down cursor buttons ( , ) and the enter button

() to change the setting.

zSee page 33, step , “ When using this unit for the first time ”.

Use the up/down cursor buttons ( , ) to select

“” and press the enter button ( ).

The password input screen is displayed.

Parental

Changing the password

Input the password registered with the number buttons ( - ).

The parental menu screen is displayed.

Use the number buttons ( - ) to input a new password

(4-digit number).

A password re-entry screen is displayed.

Use the up/down cursor buttons ( , ) to select

“” and press the enter button ( ).

A new password registration screen is displayed.

Password change

Password

Please input password

– – – –

1234567890

When you input numbers in step ,

the “–” change to “ ”.

Setup

Follow steps and in “Performing Basic Operations for

Setup Changes” (zsee page 25) to display the setup screen.

11 2

If you make a

mistake entering

numbers and

press the clear

button ( ), all

numbers input

will be cleared.

If you make a

mistake entering

numbers and

press the clear

button ( ), all

numbers input

will be cleared.

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ34

Input the password input in step .

A message screen is displayed.

Changing Parental Settings (5)

Switching Between OSD Message Display and Non-Display (1)

Note:

A password can also be input by using the left/right cursor buttons ( , ) to

select numbers at the bottom of the screen and then pressing the enter button

( ).

Press the enter button ( ).

The parental menu screen reappears.

To return to the setup screen, press the return button ( ) or the left

cursor button ( ).

When setup changes are complete, press the setup button ( ).

The screen with “ ” reappears. Press the play button ( ) to begin

play.

You can switch between display (On) or non-display (Off) of indicators

(for example, , , , , ) displayed when buttons

are pressed during DVD or video CD play.

– – – –

Use the up/down cursor buttons ( , ) to select

“” and press the enter button ( ).

The OSD Message setup screen is displayed.

OSD Message

Enter button

Cursor buttons

Change password

Password has been changed.

This password is necessary

when you change parental setting.

Please remember this password.

Please press “Enter” key.

OSD Message

Off

The current setting is

the one with a yellow

background.

SetupSetup

Follow steps and in “Performing Basic Operations for

Setup Changes” (zsee page 25) to display the setup screen.

11 2

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ35

You can change the setup, message, or other display language

(Japanese/English).

Switching Between OSD Message Display and Non-Display (2)

Use the up/down cursor buttons ( , ) to select “ ”

(for display) or “ ” (for non-display), and press the

enter button ( ).

The setup screen reappears (with the “OSD Message” setting changed as

selected).

Off

Use the up/down cursor buttons ( , ) to select the desired

language and press the enter button ( ).

The setup screen reappears (displayed in the selected language, and the

“Player Language” setting is also changed to the selected language).

Changing the Player Language

Use the up/down cursor buttons ( , ) to select

“” and press the enter button ( ).

The Player Language setup screen is displayed.

Player Language

Enter button

Cursor buttons

Set up

DVD Menu Language

Audio Language

Subtitle Language

Digital Output

Display

Parental

OSD Message

Player Language

Original

LPCM

16 : 9 Widescreen

Off

English

“ ” has been

selected on the OSD

Message setup screen.

Off

Player Language

English

日本語

The current setting is

the language with a

yellow background.

初期設定

DVDメニュー言語

音声言語

字幕言語

デジタルアウト

ディスプレイ

視聴制限

画面メッセージ

プレーヤー言語

オリジナル

LPCM

16：9 ワイドスクリーン

入

日本語

英語

日本語

“ ” (appearing in

Japanese) has been selected

on the Player Language setup

screen.

SetupSetup

Follow steps and in “Performing Basic Operations for

Setup Changes” (zsee page 25) to display the setup screen.

11 2

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ36

Before wiring and installation

■Transport Lock Screws

The mechanism in the changer is “locked” into

place during shipment by the transport screws.

Be sure to remove the screws prior to installation.

Note:

After removing the transport lock screws, place the supplied seals (A) over the screw

holes. Also, place the seals (A) over the holes which are not used for installation.

These seals are used to keep dust, which could cause a malfunction, out of the

unit.

■Installation and Wiring Precautions

1To prevent a short-circuit,

¡Be sure to turn off the ignition and remove the negative (–) battery cable prior to

installation.

Note:

If the changer is to be installed in a car that is equipped with an on-board drive or

navigation computer, do not disconnect the battery cable. If the cable is

disconnected, the computer memory may be lost. Under these conditions, use

extra caution to avoid causing a short circuit during installation.

2Do not install the unit in the following locations.

¡Locations exposed to direct sunlight.

¡Where hot air is discharged from the car heater.

¡When proper installation is not possible and

where a great deal of vibration is generated.

3¡Be sure to use the supplied brackets and screws.

¡When installing the unit, do not use any screws that are part of the brake or

steering system.

4This unit cannot be installed in any way except that which is authorized (on its

side, on its end, at a 45° angle or suspended). Installing it with its side facing down

or upside down can cause malfunctioning.

■Position of the built-in anti-vibration boards

This unit can be installed horizontally (suspended), vertically, and at a 45° angle.

Once the installation position has been decided, it’s necessary to set the position

of the built-in anti-vibration boards inside the unit. Please do this before

performing the procedure listed below. Vibration may cause the disc to skip if the

unit is used before properly setting the anti-vibration boards.

¡At the time of shipping, the built-in anti-vibration boards are set for horizontal

installation “H”.

¡There are 2 built-in anti-vibration boards on each side.

¡Set the anti-vibration board position with a Philips screwdriver or similar fine-

tipped implement before attaching the brackets.

Seals (A)

For use when unit is installed horizontally or suspended:

Confirm that 4built-in anti-vibration boards

are set to position “H”.

For use when unit is installed vertically:

4built-in anti-vibration boards should be set

to position “V”.

For use when unit is installed at a 45° angle:

4built-in anti-vibration boards should be set to

position “45°”.

Note:

After setting the built-in anti-vibration boards, place the supplied seals (B) over the

holes. These seals are used to keep dust, which could cause a malfunction, out of

the unit.

45°H

45°

45°H

45°

45°H

45°

position “H”

position “V”

position “45°”

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ37

Basic connection 1

The car stereo should be with FM tuner.

Tune the radio to the frequency to which the installer has set the FM modulator.

(FM 88.9 MHz or FM 88.3 MHz)

Wiring (1)

Interference on 88.9 MHz

Replacing the fuses

If a fuse becomes blown, open the fuse holder as shown in the illustration and

remove the fuse from both terminals.

Be sure to replace with a fuse with the correct rated

capacity (5 A). If a fuse with a capacity greater

than the rating is used, fire may result.

(Check the lead wire connections

once more before replacing the fuses.)

WARNING

¡If a clear signal cannot be obtained on 88.9

MHz, change the position of the frequency

select switch on the back of the FM

Modulator and tune the radio to 88.3 MHz

when using the changer.

¡Select a frequency before mounting the FM

Modulator.

Radio sensitivity is slightly reduced when the

FM Modulator is connected.

88.9 88.3

Driver

Attached DIN

cable (8 pin, 5 m)

Bright green

Attached parking brake cable

Connect to car’s parking brake line.

Bright green

Red

White Not used.

Yellow

(Rear)

Yellow

(Front)

Monitor with Video input jack Monitor with Video input jack

To video input

(Yellow) To video input

(Yellow)

* You can add a monitor for rear seats.

Attached

Remote control

sensor

Car stereo

with FM

Antenna

socket

Attached FM

modulator

+12 volt Accessory/Switched (red)

Connect to where the power is

supplied when the ACC power or

ignition switch is turned ON.

+12 volt Constant (yellow)

Connect this lead to the cable to

which power is continuously supplied

and which has been passed through

the car’s fuse unit.

Ground (black)

Screw this to a metal part of the

car.

Fuse 5A

Connect to car antenna.

Changer unit

If not long enough, use the

extension cable included.

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ38

Basic connection 2

When your car stereo is SANYO CD or CD/Cassette Receiver with CD Changer

Control model, attached FM modulator is not necessary.

Other connection (Example 1)

When your car stereo has RCA line-in terminals.

Wiring (2)

Attached DIN

cable (8 pin, 5 m)

Attached parking brake cable

Connect to car’s parking brake line.

Bright green

Red

White Not used.

Yellow

(Rear)

Yellow

(Front)

Monitor with Video input jack Monitor with Video input jack

To video input

(Yellow)

To video input

(Yellow)

* You can add a monitor for rear seats.

Attached

Remote control

sensor

SANYO CD or CD/Cassette Receiver

with CD Changer Control model

To DIN Socket

Bright green

Changer unit

If not long enough, use the

extension cable included.

Attached DIN

cable (8 pin, 5 m)

Attached parking brake cable

Connect to car's parking brake line.

Bright green

Red

White

To RCA line-in

terminals Car stereo with

RCA line-in

terminals

Yellow

(Rear)

Changer unit

Yellow

(Front)

Monitor with Video input jack Monitor with Video input jack

To video input

(Yellow) To video input

(Yellow)

* You can add a monitor for rear seats.

Attached

Remote control

sensor

+12 volt Accessory/Switched (red)

Connect to where the power is

supplied when the ACC power or

ignition switch is turned ON.

+12 volt Constant (yellow)

Connect this lead to the cable to

which power is continuously supplied

and which has been passed through

the car’s fuse unit.

Ground (black)

Screw this to a metal part of the

car.

Fuse 5A

Not used.

Attached FM

modulator

Bright green

If not long enough, use the

extension cable included.

* If a fuse becomes blown, replace it with a fuse with the correct rated capacity.

zSee page 38, “ Replacing the fuses ”.

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ39

Other connection (Example 2)

Adding a digital amplifier or an amplifier with Dolby digital decoder.

Notes:

¡Read the manuals supplied with the digital amplifier or the amplifier with Dolby

digital decoder as well as this manual.

¡When you add an amplifier with Dolby digital decoder, select “Bitstream” in “Digital

Output” on the Setup. zSee page 29,“Changing the Digital Output”.

Procedure for installation on carpet (Horizontal position)

Wiring (3) Installation (1)

2 3

4 5

¡Confirm that the built-in anti-

vibration boards on both the

left and right sides are set to

the horizontal installation

position “H”.

¡Attach Small bracket (L) and

Small bracket (R) to the

changer using the hexagonal

bolts (M5 x 8).

¡Attach Small brackets (L) and

(R) to their respective

brackets (B) using the

hexagonal bolts (M6 x 20)

and the hexagonal nuts (M6).

¡Pull back the carpet and determine

where to attach the changer.

¡Stick the supplied double-sided

tape to the bottom of the brackets

(B) and peel off the paper backing.

¡Affix the changer to the floor by

pressing in place.

¡Using a knife, cut “X”s in the carpet

directly above the brackets (B)

bolts.

¡Return the carpet to its original

position allowing the bolts to stick

through.

¡Once more, use the hexagonal nuts

to attach the changer on top of the

carpet.

¡Remove the hexagonal nuts and

take off the changer.

45°

Hexagonal bolts

(M6 x 20)

Hexagonal

bolts

(M5 x 8)

Built-in anti-vibration

board position

Attached DIN

cable (8 pin, 5 m)

Attached parking brake cable

Connect to car’s parking brake line.

Bright green

Red

White

Not used.

Yellow

(Rear)

Changer unit

Yellow

(Front)

Monitor with Video input jack Monitor with Video input jack

To video input

(Yellow) To video input

(Yellow)

* You can add a monitor for rear seats.

Attached

Remote control

sensor

Attached FM

modulator

Commercially

available optical

cable

+12 volt Accessory/Switched (red)

Connect to where the power is

supplied when the ACC power or

ignition switch is turned ON.

+12 volt Constant (yellow)

Connect this lead to the cable to

which power is continuously supplied

and which has been passed through

the car’s fuse unit.

Ground (black)

Screw this to a metal part of the

car.

Fuse 5A

Not used.

To digital

audio input

Bright green Digital amplifier/

Amplifier with Dolby

digital decoder

If not long enough, use the

extension cable included.

* If a fuse becomes blown, replace it with a fuse with the correct rated capacity.

zSee page 38, “ Replacing the fuses ”.

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ40

Procedure for installation on carpet (Vertical position) Procedure for installation on carpet (At a 45° angle)

Installation (2)

2 3

4 5

¡Set the built-in anti-vibration

boards on both the left and

right sides to the vertical

installation position “V”.

¡Attach Large bracket (L) and

Large bracket (R) to the

changer using the hexagonal

bolts (M5 x 8).

¡Attach Large brackets (L)

and (R) to their respective

brackets (B) using the

hexagonal bolts (M6 x 20)

and the hexagonal nuts (M6).

¡Pull back the carpet and determine

where to attach the changer.

¡Stick the supplied double-sided

tape to the bottom of the brackets

(B) and peel off the paper backing.

¡Affix the changer to the floor by

pressing in place.

¡Using a knife, cut “X”s in the carpet

directly above the brackets (B)

bolts.

¡Return the carpet to its original

position allowing the bolts to stick

through.

Once more, use the hexagonal nuts to

attach the changer on top of the carpet.

¡Remove the hexagonal nuts and

take off the changer.

45°

Hexagonal bolts

(M6 x 20)

Built-in anti-vibration

board position

45°

Hexagonal

bolts

(M5 x 8)

2 3

4 5

¡Set the built-in anti-vibration

boards on both the left and

right sides to the 45°

installation position “45°”.

¡Attach Large bracket (L) and

Large bracket (R) to the

changer using the hexagonal

bolts (M5 x 8).

¡Attach Large brackets (L)

and (R) to their respective

brackets (B) using the

hexagonal bolts (M6 x 20)

and the hexagonal nuts (M6).

¡Pull back the carpet and determine

where to attach the changer.

¡Stick the supplied double-sided

tape to the bottom of the brackets

(B) and peel off the paper backing.

¡Affix the changer to the floor by

pressing in place.

¡Using a knife, cut “X”s in the carpet

directly above the brackets (B)

bolts.

¡Return the carpet to its original

position allowing the bolts to stick

through.

¡Once more, use the hexagonal nuts

to attach the changer on top of the

carpet.

¡Remove the hexagonal nuts and

take off the changer.

Hexagonal bolts

(M6 x 20)

45°

Built-in anti-vibration

board position

Hexagonal

bolts

(M5 x 8)

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ41

Procedure for installation (Suspended position)

Installation (3)

Installation of Remote control sensor

Using the velcro tape, install the Remote control sensor in a location that will not

obstruct driving.

Installation of FM modulator

Using the velcro tape, install the FM modulator to the floor or other surface.

Notes:

¡Before applying the Velcro tape, use the included cleaning cloth to wipe the

surface where the tape will be applied, then dry it completely.

¡If necessary, secure the remote control sensor cord with the cord clip supplied.

2 3

¡Confirm that the built-in

antivibration boards on

both the left and right sides

are set to the horizontal

installation position “H”.

¡Attach Small bracket (L)

and Small bracket (R) to

the changer using the

hexagonal bolts (M5 x 8).

¡Determine the mounting location

and drill four mounting holes.

¡Attach the changer with the tapping

screws (M5 x 12).

Hexagonal bolts

Built-in anti-vibration

board position

Hexagonal

bolts

45°

3.6ø

FM modulator

Velcro tape

Remote control

sensor

FM Modulator

Velcro tapeRemote

control

sensor

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ42

Attempting to play a DVD other

than one with a region number of

“2” or “ALL”.

The audiovisual restriction

function is operative and the unit

is prohibiting DVD play.

The command is not available for

the DVD in play.

The command is not available on

the screen displayed.

Attempting to play a disc that the

unit cannot play.

Disc loaded upside down.

Dirty disc.

Moisture on the laser lens of unit.

All of the discs in the magazine

are discs that the unit cannot

play.

A magazine has not been

inserted in the unit.

There are no discs at all in the

magazine.

The region number of the unit is

“2”. DVDs with a region number

other than “2” or “ALL” cannot be

played in the unit.

Check the parental level settings

in the setup. Change the parental

level in the unit to match the

parental level of the DVD you are

trying to play, and the disc can

then be played.

A DVD can prohibit certain

operations as the disc maker

desires.

When the screen advances, the

command will become functional.

Use a disc that the unit can play.

Load disc properly.

Clean disc.

Remove the magazine from the

unit and wait about one hour.

Use a disc that the unit can play.

Insert a magazine in the unit.

Insert a disc in the magazine.

Message Cause Remedy Page

“This disc

can’t be

played.”

“You can’t

operate this

command

now.”

“This disc can’t

be played.”

“All discs can’t

be played.”

“Magazine is

not loaded.”

“Magazine

empty”

Blown fuse

Improper connection

Direction in which it is inserted is

wrong.

A disc is not inserted or is

inserted upside-down.

The disc is dirty.

The car battery voltage is low.

A disc that the unit cannot play is

inserted.

A DVD of a region number that

the unit cannot play is inserted.

The audiovisual restriction

function is operative and the unit

is prohibiting DVD play.

The disc recorded in PAL format

is insered when the TV signal

format switch of the unit is set to

“NTSC” position.

The disc recorded in NTSC

format is inserted when the TV

signal format switch of the unit is

set to “PAL” position.

The disc in play prohibits the

operation.

Adjustment of brightness, tone,

or color depth is poor.

Replace with a properly-rated

fuse. If the fuse blows again,

consult with your dealer.

Check connections.

Insert it in proper direction.

Insert the disc properly, with the

play side up.

Clean any debris from the disc.

Charge the battery. If the unit still

does not function, consult your

dealer.

Insert a disc that the unit can

play.

The region number of the unit is

“2”. Use a DVD with a region

number of “2” or “ALL”.

Check the parental level settings

in the setup.

Change the position of the TV

signal format switch depending

on the disc’s TV signal format.

The operation cannot be

performed with the disc or the

scene in play (also refer to the

instructions included with the

disc).

Adjust the brightness, tone, or

color depth on the monitor

connected to the unit.

Symptom Cause Remedy Page

No power

Magazine

cannot be

installed.

Play does not

begin.

When a

function button

is pressed,

only the “ ”

is displayed,

and the unit

does not

function.

Image color or

tone is poor.

For easier understanding, the following messages are displayed during operation. An error made during operation or installation can sometimes be mistaken for a

system malfunction. Check below before contacting your Authorized SANYO Service

Station.

Message displays Troubleshooting (1)

–

38~40

–

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ43

Troubleshooting (2)

Brightness adjustment is turned

all the way down.

The parking brake is not set.

Improper connection

Sound adjustment is turned all

the way down.

Improper connection

Fast forward, fast reverse, frame

advance, or slow play is

operative.

Disc is dirty or scratched.

The location of use is producing

vibration.

The light emitter of the remote

control is not pointed at the light

receiver of the remote control

sensor.

The remote control and the

remote control sensor are too far

apart.

The area between the remote

control and the remote control

sensor is obstructed.

The remote control batteries are

worn.

The remote control batteries are

inserted improperly.

Adjust the brightness on the

monitor connected to the unit.

The monitor connected to the

front video output will not display

disc images if the parking brake

is not set. Stop the vehicle in a

safe place and set the parking

brake.

Check connection.

Adjust the volume on the car

stereo or the monitor connected

to the unit.

Check connection.

Sound is not produced during

fast forward, fast reverse, frame

advance, or slow play.

Wipe any debris off the disc, and

do not use a scratched disc.

Vibration of the unit can cause

sound skipping and image

corruption.

When the vibration stops, normal

function will resume.

Operate the remote control with

the light emitter pointed at the

light receiver of the remote

control sensor.

Operate the remote control within

a roughly 3m straight-line

distance of the remote control

sensor.

Remove the obstruction.

Change the batteries.

Check the positive and negative

orientation of the batteries and

insert correctly.

Symptom Cause Remedy Page

No picture.

No sound.

Sound or

picture is

corrupted.

Remote control

does not

operate.

The DVD in play contains no

subtitles.

The subtitle language is set to

“Off”.

The DVD in play prohibits hiding

of subtitles.

The DVD in play contains only 1

language.

The DVD in play prohibits

language switching.

A language not stored on the

DVD in play was selected.

An aspect ratio not stored on the

DVD in play was selected.

The DVD in play contains only 1

angle, or multiple angles are

stored only for some scenes.

The DVD in play prohibits angle

switching.

The parental control function is

operative, and the unit is

prohibiting DVD play.

The DVD in play does not

contain a parental level.

You are playing a video CD not

compatible with PBC (playback

control).

Subtitles cannot be displayed.

Set the language to the subtitle

language you wish to display.

Subtitles cannot be hidden.

Languages cannot be switched

on a disc not storing multiple

languages.

Languages cannot be switched.

You cannot switch to a language

not stored on a disc. In this

instance, any language stored on

the disc may be used.

You cannot switch to an aspect

ratio not stored on a disc. In this

instance, any aspect ratio stored

on the disc may be used.

The angle cannot be switched

when playing a disc or scene not

storing multiple angles.

The angle cannot be switched.

Check the parental level setting

in setup.

Parental control cannot be used.

You cannot use the PBC function

with a video CD that is not PBC-

compatible.

Symptom Cause Remedy Page

No subtitles.

Subtitles will

not disappear.

Audio

language or

subtitle

language

cannot be

changed.

Selected audio

language or

subtitle

language is not

used.

Aspect ratio

selected during

setup is not

used.

Angle cannot

be switched.

Play does not

begin when a

title is selected

and the enter

button is

pressed.

Parental

control was

applied, but

play is not

restricted.

Video CD

menu screen is

not displayed.

–

27,

–

12,

31~35

–

38~40

–

38~40

12,

–

18,

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ44

Troubleshooting (3) Specifications

The “DVD Menu Language” in

the setup is set to a foreign

language.

The “プレーヤー言語 (Player

Language)” in the setup is set to

“日本語”.

Set the “DVD Menu Language” to

your preferred language.

* If the language selected is not

stored on the disc, any

language stored on the disc

may be displayed.

Set the “プレーヤー言語 (Player

Language)” to “English”, and

English will be displayed.

Symptom Cause Remedy Page

DVD menu is

displayed in a

foreign

language.

Setup or

messages are

displayed in

Japanese.

¡Changer

Type 10-Disc DVD/Video CD/Audio CD Changer system

Region Number 2

Playable discs Type: DVD video, Video CD, Audio CD

Size: 5 inches (12 cm)

TV signal format PAL color / NTSC color

Pickup Optical semiconductor laser

(DVD: 1-beam, CD: 3-beam)

Channels 2-channel stereo

Frequency response 5 Hz – 20 kHz

Dynamic range 90 dB

Signal to noise ratio 90 dB

Total harmonic distortion 0.01% (1 kHz)

Channel separation 85 dB (1 kHz)

Wow and flutter Below measurable limits

Output level 1.5 V/10kΩ

Power requirements DC 12 V (14.4 V typical)

Drain current 1 A (when playing)

Dimensions (W x H x D) Approx. 250 x 80 x 200 mm

Weight Approx. 2.5 kg

¡FM modulator

Dimensions (W x H x D) Approx. 105 x 26 x 45 mm

Weight Approx. 220 g

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ45

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ46

SANYO Electric Co., Ltd.

Printed in Japan

2RR6P10A06700

DV-S100/ZA(GB) 03.11.28 1:19 PM ページ1

Sanyo 10 Disc Dvd Cd Changer Dv S100 Users Manual

DV-S100 to the manual a61514ea-8d1c-416f-9702-ee1f29dd3287

Navigation menu

Versions of this User Manual:

Views

Navigation