Sanyo Projector Plc Xm80L Users Manual

Sanyo Projector PLC-XM80L SANYO PLC-XM80 MANUAL

PLC-XM80L to the manual bc521f7a-18b1-4ffd-ad21-bcb18e472cdc

: Sanyo Sanyo-Projector-Plc-Xm80L-Users-Manual-338007 sanyo-projector-plc-xm80l-users-manual-338007 sanyo pdf

Open the PDF directly: View PDF .
Page Count: 89

Download
Open PDF In Browser	View PDF

Multimedia Projector
MODEL

PLC-XM80
PLC-XM80L

Network Supported
Refer to the Owner's Manual below for
details about network function.
◊

£ Network Set-up and Operation

◊ Projection lens is optional.

Owner’s Manual

Features and Design
This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use.
This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display
(LCD) technology.

t

Functionally Rich

This projector has many useful functions such
as lens shifting, ceiling and rear projection,
perpendicular omnidirectional projection, variety of
lens options, etc.
t

Multi-use Remote Control

Use the remote control as wired and wireless, or as
a PC wireless mouse. Eight remote control codes
and selectable pointer shapes are also available.
t

Simple Computer System Setting

The projector has the Multi-scan system to conform
to almost all computer output signals quickly (p.36).
Supported resolution up to WUXGA.
t

Useful Functions for Presentation

Digital zoom function allows you to focus on the
crucial information during a presentation (pp.29,
43).
t

Security Function

The Security function helps you to ensure security
of the projector. With the Key lock function, you can
lock the operation on the side control or remote
control (p.59). PIN code lock function prevents
unauthorized use of the projector (pp.59-60).
t

Power Management

The Power management function reduces power
consumption and maintains lamp life (p.57).

t

Motor-driven Lens Shift

Projection lens can be moved up, down, right and
left with the motor-driven lens shift function. This
function makes it easy to provide projected image
where you want. Zoom and focus can also be
adjusted with a motor-driven operation. (p.27)
t

Multilanguage Menu Display

Operation menu is available in 12 languages;
English, German, French, Italian, Spanish,
Portuguese, Dutch, Swedish, Russian, Chinese,
Korean, and Japanese (p.51).
t

Logo Function

The Logo function allows you to customize the
screen logo (pp.52-54). You can capture an image
for the screen logo and use it for the starting-up
display or between presentations.
t

Pointer Function

Remote control pointer function. This function helps
you to make a smart presentation on a projected
screen.
t

Multiple Interface Terminals

The projector has several interface terminals that
can support various types of equipment and signals
(p.11).
t

Closed Caption

This is a printed version of the program sound or
other information displayed on the screen. You can
turn on the feature and switch the channels (p.61).

PNote:
	 •	The	On-Screen	Menu	and	figures	in	this	manual	may	differ	slightly	from	the	product.
	 •	The	contents	of	this	manual	are	subject	to	change	without	notice.



Table of Contents
Features and Design  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
Table of Contents  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
To The Owner  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .
Safety Instructions  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .



4
5

Air Circulation

6

Installing the Projector in Proper Directions

7

Moving the Projector

8

Cautions in Handling the Projector

8

Compliance  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 9
Part Names and Functions  .  .  .  .  .  .  .  .  . 10

Input Selection  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 
Direct Operation

33

Computer Input Source Selection

34

Video Input Source Selection

35

Computer Input .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 6
Computer System Selection

36

Auto PC Adjustment

37

Manual PC Adjustment

38

Image Level Selection

40

Image Adjustment

41

Screen Size Adjustment

42

Front

10

Back

10

Bottom

10

Rear Terminal

11

Side Control and Indicators

12

Remote Control

13

Remote Control Battery Installation

15

Remote Control Receivers and Operating Range

15

Wired Remote Control Transmitter

15

Remote Control Code

16

Filter Instructions

63

Adjustable Feet

16

Replacing the Filter Cartridge

64

Resetting the Filter Counter

65

Lamp Replacement

66

Cleaning the Projection Lens

68

Cleaning the Projector Cabinet

68

Warning Indicators

69

Installation .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 17
Positioning the Projector

17

Lens Shift Adjustment

17

Lens Installation

18

Connecting to a Computer (Digital and Analog RGB)19

Video Input  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 45
Video System Selection

45

Image Level Selection

46

Image Adjustment

47

Screen Size Adjustment

49

Setting  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 51
Setting

51

Maintenance and Care  .  .  .  .  .  .  .  .  .  .  .  .  . 6

Appendix  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 70

Connecting to Video Equipment (Video, S-video)

20

Connecting for Audio Signal

21

Troubleshooting

70

Connecting the AC Power Cord

22

Menu Tree

73

Indicators and Projector Condition

76

Compatible Computer Specifications

79

Technical Specifications

81

Optional Parts

82

Lens Replacement

82

PJ Link Notice

82

Configurations of Terminals

83

PIN Code Number Memo

84

Dimensions

85

Serial Control Interface

86

Basic Operation  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 
Turning On the Projector

23

Turning Off the Projector

24

How to Operate the On-Screen Menu

25

Menu Bar

26

Operating with Projector Control

27

Sound Adjustment

28

Operating with Remote Control

29

Keystone Correction

31

Pointer Function

32

Wireless Mouse Operation

32

Trademarks
Each name of corporations or products in this book is either a registered trademark or a trademark of its respective
corporation.



To The Owner
Before installing and operating the projector, read this
manual thoroughly.
The projector provides many convenient features and
functions. Operating the projector properly enables
you to manage those features and maintains it in good
condition for many years to come.
Improper operation may result in not only shortening the
product life, but also malfunctions, fire hazard, or other
accidents.
If your projector seems to operate improperly, read this
manual again, check operations and cable connections
and try the solutions in the “Troubleshooting” section
in the back of this manual. If the problem still persists,
contact the dealer where you purchased the projector or
the service center.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK) . NO USER-SERVICEABLE
PARTS INSIDE EXCEPT LAMP
REPLACEMENT . REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL .
THIS SYMBOL INDICATES THAT
DANGEROUS VOLTAGE CONSTITUTING A
RISK OF ELECTRIC SHOCK IS PRESENT
WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE
ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE
OWNER'S MANUAL WITH THIS UNIT.
FOR EU USERS
The symbol mark and recycling systems described below apply to EU countries and do not apply to countries in other areas of the world.
Your product is designed and manufactured with high quality materials and components which can be recycled and/or
reused.
The symbol mark means that electrical and electronic equipment, batteries and accumulators, at their end-of-life, should
be disposed of separately from your household waste.
Note:
If a chemical symbol is printed beneath the symbol mark, this
chemical symbol means that the battery or accumulator contains a heavy metal at a certain concentration. This will be
indicated as follows: Hg: mercury, Cd: cadmium, Pb: lead
In the European Union there are separate collection systems
for used electrical and electronic equipment, batteries and
accumulators.
Please, dispose of them correctly at your local
community waste collection/recycling centre.
Please, help us to conserve the environment
we live in!

READ AND KEEP THIS OWNER’S MANUAL FOR
LATER USE .

4

Safety Precaution
WARNING: l THIS APPARATUS MUST BE EARTHED .
l TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR
MOISTURE .
– This projector produces intense light from the projection
lens. Do not stare directly into the lens, otherwise eye
damage could result. Be especially careful that children do
not stare directly into the beam.
– Install the projector in a proper position. Otherwise it may
result in a fire hazard.
– Allowing the proper amount of space on the top, sides,
and rear of the projector cabinet is critical for proper
air circulation and cooling of the unit. The diagrams
shown here indicates the minimum space required. If
the projector is to be built into a compartment or similarly
enclosed, these minimum distances must be maintained.
– Do not cover the ventilation slots on the projector. Heat
build-up can reduce the service life of your projector, and
can also be dangerous.
SIDE and TOP

REAR

0.7’(20cm)

1.5’(50cm)

3’(1m)

3’(1m)

– If20cm
the projector is unused for an extended time, unplug the
projector from the power outlet.
– Do not project the same image for a long time. The
afterimage may remain on the LCD panels by the
characteristic of panel.
50cm

1m

1m

CAUTION ON HANGING FROM THE CEILING
DO NOT SET THE PROjECTOR IN GREASy, WET,
OR SMOKy CONDITIONS SUCH AS IN A KITCHEN
TO PREVENT A BREAKDOWN OR A DISASTER . IF
THE PROjECTOR COMES IN CONTACT WITH OIL OR
CHEMICALS, IT MAy BECOME DETERIORATED .

CAUTION
Not for use in a computer room as defined in the
Standard for the Protection of Electronic Computer/
Data Processing Equipment, ANSI/NFPA 75.

Safety Instructions
All the safety and operating instructions should be read before
the product is operated.
Read all of the instructions given here and retain them for
later use. Unplug this projector from AC power supply before
cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning.

This projector should be operated only from the type of power
source indicated on the marking label. If you are not sure of
the type of power supplied, consult your authorized dealer or
local power company.

Follow all warnings and instructions marked on the projector.

Do not overload wall outlets and extension cords as this can
result in fire or electric shock. Do not allow anything to rest on
the power cord. Do not locate this projector where the cord
may be damaged by persons walking on it.

For added protection to the projector during a lightning storm,
or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet. This will prevent damage
due to lightning and power line surges.

Do not attempt to service this projector yourself as opening
or removing covers may expose you to dangerous voltage
or other hazards. Refer all servicing to qualified service
personnel.

Do not expose this unit to rain or use near water... for
example, in a wet basement, near a swimming pool, etc...
Do not use attachments not recommended by the
manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or
table. The projector may fall, causing serious injury to a child
or adult, and serious damage to the projector. Use only with
a cart or stand recommended by the manufacturer, or sold
with the projector. Wall or shelf mounting should follow the
manufacturer's instructions, and should use a mounting kit
approved by the manufacturers.
An appliance and cart combination
should be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the appliance and cart
combination to overturn.

Slots and openings in the back and side of the cabinet are
provided for ventilation, to ensure reliable operation of the
equipment and to protect it from overheating.
The openings should never be covered with cloth or other
materials, and the bottom opening should not be blocked
by placing the projector on a bed, sofa, rug, or other similar
surface. This projector should never be placed near or over a
radiator or heat register.
This projector should not be placed in a built-in installation
such as a book case unless proper ventilation is provided.

Unplug this projector from wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the projector.
c. If the projector has been exposed to rain or water.
d. If the projector does not operate normally by following
the operating instructions. Adjust only those controls that
are covered by the operating instructions as improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the projector to normal operation.
e. If the projector has been dropped or the cabinet has been
damaged.
f. When the projector exhibits a distinct change in
performance-this indicates a need for service.
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock, or injury to persons.
Upon completion of any service or repairs to this projector,
ask the service technician to perform routine safety checks to
determine that the projector is in safe operating condition.

NOTE FOR CUSTOMERS IN THE US
Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN
MERCURY AND MUST BE RECYCLED OR DISPOSED
OF ACCORDING TO LOCAL, STATE OR FEDERAL
LAWS.

Never push objects of any kind into this projector through
cabinet slots as they may touch dangerous voltage points
or short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the projector.
Do not install the projector near the ventilation duct of airconditioning equipment.

5

Safety Instructions
Air Circulation
Openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked or
covered.

CAUTION
Hot air is exhausted from the exhaust vent. When using or
installing the projector, the following precautions should be
taken.
– Do not put any flammable object or spray can near the
projector, hot air is exhausted from the air vents.
– Keep the exhaust vent at least 3’ (1 m) away from any
objects.
– Do not touch peripheral parts of the exhaust vent,
especially screws and metallic parts. These areas will
become hot while the projector is being used.
– Do not put anything on the cabinet. Objects put on the
cabinet will not only get damaged but also may cause
fire hazard by heat.
Cooling fans are provided to cool down the projector.
The fans’ running speed is changed according to the
temperature inside the projector.

IMPORTANT!
Filter Maintenance!!
The projector uses a lamp which generates significant
heat. The cooling fans and air vents are provided to
dissipate the heat by drawing air into the housing and the
filter is located in the intake vents to prevent dust from
getting inside of the projector.
In order to care for the projector appropriately, regular
cleaning is required. Remove any dirt or dust that has
accumulated on the projector.
If the projector reaches a time set in the timer setting, a
Filter warning icon (Fig. 1) appears on the screen and
WARNING FILTER indicator on the top panel lights up (see
below), indicating that the filter replacement is necessary.
Blocking the air vents and leaving the projector uncleaned
for a long time may not only damage the projector and may
require costly repairs but may also cause accidents or fire.
For maintenance of the filter, refer to “Filter counter” on
page 62 and “Maintenance and Care” on pages 63-65.
Damages to the projector caused by using an
uncleaned filter or improper maintenance will void the
warranty on the projector .

Air Intake Vent
Exhaust Vent
(Hot air exhaust)

Top Panel

Air flow
Fig . 1 Filter warning icon

WARNING FILTER
indicator

6

Safety Instructions
Installing the Projector in Proper Directions
Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in severe accident
or fire hazard.
This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the horizontal
plane. When installing the projector in downwardly inclined position, install the projector bottom side up.

PNote:
	 To	inverse	or	reverse	the	image,	set	the	ceiling	function	to	On.	(pp.	44,	50)

Positioning Precautions
Avoid positioning the projector as described below when installing.

10˚

Do not tilt the projector more than 10
degrees from side to side.

10°

10°

In upward projection, do not tilt
the projector over 10 degrees
right and left.

10˚

Do not put the projector on either side
to project an image.

In downward projection, do not
tilt the projector over 10 degrees
right and left.

10°

10°

CAUTION ON CEILING MOUNTING
For ceiling mounting, you need the ceiling mount kit designed for this projector. When not mounted properly,
the projector may fall, causing hazards or injury. For details, consult your dealer. The warranty on this projector
does not cover any damage caused by use of any non-recommended ceiling mount kit or installation of the
ceiling mount kit in an improper location.

7

Safety Instructions
Moving the Projector
Notes on protector
Remove the protector on the lens before use, and keep it for later use. For
transportation, press and hold the LENS button or LENS SHIFT button to
adjust the lens to the central position when four arrows turn to red, and then
attach the protector to protect the lens. (Only for PLC-XM80).
Protector

Use the handle grip when moving the projector.
Retract the adjustable feet to prevent damage to the lens and
cabinet when carrying.
When this projector is not in use for an extended period, put it into a
suitable case to protect the projector.

CAUTION IN CARRyING OR TRANSPORTING THE PROjECTOR
– Do not drop or bump the projector, otherwise damages or malfunctions may result.
– When carrying the projector, use a suitable carrying case.
– Do not transport the projector by courier or any other transport service in an unsuitable transport case. This
may cause damage to the projector. For information about transporting the projector by courier or any other
transport service, consult your dealer.
– Do not put the projector in a case before it is cooled enough.

Cautions in Handling the Projector
Do not hold the lens or the lens compartment tube when lifting or
moving the projector. Doing so may cause damage to the lens and
the projector.
Care must be taken when handling the projector; do not drop,
bump, subject it to strong forces, or put other things on the cabinet.

CAUTION
Projection lens is a motorized lens. Please note the
followings when using the projector.
l Do not touch the lens while it is moving as this
could cause injury to the fingers.
l Never allow children to touch the lens.

8

Do not hold the lens and the peripheral part.

Compliance
Federal Communications Commission Notice
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such
changes or modifications should be made, you could be required to stop operation of the equipment.
Model Number
Trade Name
Responsible party
Address
Telephone No.

: PLC-XM80, PLC-XM80L
: Sanyo
: SANYO NORTH AMERICA CORPORATION
: 21605 Plummer Street, Chatsworth, California 91311, U.S.A.
: (818)998-7322

AC Power Cord Requirement
The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it.

AC Power Cord for the United States and Canada:
AC Power Cord used in the United States and Canada is listed by the Underwriters
Laboratories (UL) and certified by the Canadian Standard Association (CSA).
AC Power Cord has a grounding-type AC line plug. This is a safety feature to be sure that the
plug will fit into the power outlet. Do not try to defeat this safety feature. Should you be unable
to insert the plug into the outlet, contact your electrician.

GROUND

AC Power Cord for the United Kingdom:
This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of
the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating,
marked thus . If the fuse cover is detachable, never use the plug with the cover omitted. If a replacement fuse cover
is required, ensure it is of the same colour as that visible on the pin face of the plug (i.e. red or orange). Fuse covers
are available from the Parts Department indicated in your User Instructions.
If the plug supplied is not suitable for your socket outlet, it should be cut off and destroyed.
The end of the flexible cord should be suitably prepared and the correct plug fitted.
ASA

WARNING: A PLUG WITH BARED FLEXIBLE CORD IS HAZARDOUS IF ENGAGED IN A LIVE SOCKET
OUTLET .
The Wires in this mains lead are coloured in accordance with the following code:
Green-and-yellow ············· Earth
Blue ································· Neutral
Brown ······························ Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in the plug which is marked by the letter
E or by the safety earth symbol
or coloured green or green-and-yellow.
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

WARNING: THIS APPARATUS MUST BE EARTHED .
THE SOCKET-OUTLET SHOULD BE INSTALLED NEAR THE EQUIPMENT AND EASILy ACCESSIBLE .

9

Part Names and Functions
①

Front

① Lens Release Button

③

②

② Indicators
③ Lamp Cover
④ Speaker
⑤ Lens Cap

(for PLC-XM80)
⑥ Projection Lens
(for PLC-XM80)
⑦ Lens Mount Cover
(for PLC-XM80L)
⑧ Infrared Remote Receiver (Front & Top)
⑨ Side Controls
④ ⑤

⑥

⑧

⑨

⑩
⑩ Exhaust Vent

⑦

CAUTION

Back
⑩ ⑪

⑫

⑬

Hot air is exhausted from the exhaust vent. Do
not put heat-sensitive objects near this side.
⑪ Infrared Remote Receiver (Back)
⑫ Terminals and Connectors
⑬ Filter Cover & Air Intake Vent
⑭ Power Cord Connector

⑭
⑯
⑮ Hand Grip

Bottom

⑰

10

⑯ Security Chain Hook

⑮ ⑯

PNote:
This	is	not	a	handle	for	carrying	the	projector.
Do	not	carry	the	projector	with	this	hook.
⑰ Adjustable Feet

⑰

Part Names and Functions
Rear Terminal
①

②

③

⑨

④

⑩

⑤

⑪

⑫

⑥

⑦

⑧

⑬

⑭

⑮

◊

① INFRARED REMOTE RECEIVER (Back)
The infrared remote receiver is also located in the front and top
(pp.10, 15).

⑩ S-VIDEO INPUT jACK
Connect the S-VIDEO output signal from video
equipment to this jack (p.20).

② LAN CONNECTION TERMINAL
Connect the LAN cable (refer to the owner’s manual of “Network
Set-up and Operation”).

⑪ VIDEO INPUT jACK
Connect the component or the composite video
output signal from video equipment to these
jacks (p.20).

③ CONTROL PORT CONNECTOR
When controlling the projector with RS-232C, connect the
control equipment to this connector with the serial control cable.
(p.19)
④ ANALOG OUT TERMINAL
This terminal can be used to output the incoming analog RGB
signal from INPUT 1-3 terminal to the other monitor (pp.19-20).
⑤ COMPUTER INPUT TERMINAL (ANALOG)
Connect the computer (or RGB scart) output signal to this
terminal (pp.19-20).
⑥ AUDIO OUTPUT jACK
This jack outputs the audio signal from computer or video
equipment to external audio equipment (p.21).
⑦ R/C jACK
When using the wired remote control, connect the wired remote
control to this jack with a remote control cable (not supplied)
(p.15).
⑧ COMPUTER INPUT TERMINAL (DIGITAL)
Connect the computer output digital signal to this terminal. The
HDTV (HDCP compatible) signal can also be connected (pp.1920).
⑨ 5 BNC INPUT jACKS
Connect the component or composite video output signal from
video equipment to VIDEO/Y, Pb/Cb, and Pr/Cr jacks or connect
the computer output signal (5 BNC Type [Green, Blue, Red,
Horiz. Sync, and Vert. Sync.]) to G, B, R, H/V, and V jacks
(pp.19-20).

⑫ AUDIO  jACKS (L(MONO)/R)
Connect the audio output signal from video
equipment connected to ⑩ or ⑪ to this jack.
For a mono audio signal (a single audio jack),
connect it to the L (MONO) jack (p.21).
⑬ AUDIO 1 jACK
Connect the audio output (stereo) signal from a
computer or video equipment (p.21).
⑭ AUDIO  jACK
Connect the audio output (stereo) signal from a
computer or video equipment (p.21).
⑮ USB CONNECTOR (Series B)
Use this connector when controlling a computer
with the remote control of the projector. Connect
the USB terminal of your computer to this
connector with the supplied USB cable (p.19).

◊ Kensington Security Slot
This slot is for a Kensington lock used to deter
theft of the projector.
*Kensington is a registered trademark of ACCO
Brands Corporation.

11

Part Names and Functions
Side Control and Indicators
Side Control

Indicators (on the top panel)

①

⑧
⑨

⑦

②
③

⑩
⑪

④

⑥

⑫
⑬

⑤

① ON/STAND-By button
Turn the projector on or off (pp.23-24).

⑨ LAMP indicator
Light red during operations.

② MENU button
Open or close the On-Screen Menu (p.25).

⑩ WARNING TEMP . indicator
Blink red when the internal temperature of the
projector exceeds the operating range (pp.69,
76-78).

③ SELECT button
– Execute the selected item (p.25).
– Expand or compress the image in the Digital
zoom mode (p.43).
④ INFO . button
Display the information window on the screen (p.27).
⑤ Point pqt u ( VOLUME – / + ) buttons
– Select an item or adjust the value in the OnScreen Menu (p.25).
– Pan the image in Digital zoom + mode (p.43).
– Adjust the volume level (with Point t u buttons)
(p.28).
⑥ LENS button
Enter the focus, zoom, and lens shift adjustment
mode (p.27).
⑦ INPUT button
Select an input source (pp.33-35).
⑧ POWER indicator
– Light green while the projector is in stand-by mode.
– Light green during operations.

1

⑪ WARNING FILTER indicator
– Blink fast when the filter cartridge is not
installed (pp.63, 78).
– Light orange when the filter counter reaches
a time set in the timer setting, urging
immediate filter cartridge replacement
(pp.62, 63, 78).
⑫ P-MANAGEMENT STAND-By indicator
Light blue when the projector is in the Power
management mode (pp.56, 76).
⑬ LAMP REPLACE indicator
Light orange when the projection lamp reaches
its end of life (pp.66, 77).

Part Names and Functions
Remote Control
③

②

①

④
⑤
⑥

⑬
⑭

⑦

⑫

⑧

⑨

⑪

⑩

①

STAND-By button
Turn the projector off (p.24).

②

WIRED REMOTE jack
Connect the remote control cable (not supplied) to
this jack when using as a wired remote control.

③

SIGNAL EMISSION indicator
Light red while a signal is being sent from the
remote control to the projector.

④

ON button
Turn the projector on (p.23).

⑤

AUTO PC button
Automatically adjust the computer image to its
optimum setting (pp.29, 37).

⑥

INPUT button
Select a signal (pp.33-35).

⑦

MENU button
Open or close the On-Screen Menu (p.25).

⑧
⑨

SCREEN button
Select the screen size (p.29).
POINT pqt u ( VOLUME – / +, MUTE) buttons
– Select an item or adjust the value in the OnScreen Menu (p.25).
– Pan the image in Digital zoom + mode (p.43).
– Adjust the volume level (with Point t u buttons)
or mute the sound (with Point q button.) (p.28).

⑩

MOUSE POINTER button
Move a pointer of the projector or a pointer for
wireless mouse operation (p.32).

⑪

SELECT button
– Execute the selected item (p.25).
– Expand or compress the image in the Digital
zoom mode (p.43).

⑫

NO SHOW button
Temporarily turn off the image on the screen (p.29).

⑬

INFO . button
Display the input source information (p.27).

⑭

L-CLICK button
Act as the left mouse button for wireless mouse
operation (p.32).

To ensure safe operation, observe the following
precautions:
– Do not bend, drop, or expose the remote control to
moisture or heat.
– For cleaning, use a soft dry cloth. Do not apply
benzene, thinner, spray, or any other chemical
materials.

1

Part Names and Functions
Remote Control

㉕

⑮

㉔
⑯

㉓

㉖
For PIN code
and remote
control code.

㉒
⑰
㉑
⑱

⑲

⑳

14

⑮

D .ZOOM button
Select the Digital zoom +/- mode and resize the
image (p.43).

㉒

FREEZE button
Freeze the picture on the screen and mute the
sound (p.30).

⑯

INPUT 1-  buttons
Select an input source (INPUT 1 – INPUT 3)
(pp.33-35).

㉓

P-TIMER button
Operate the P-timer function (p.30).

⑰

KEySTONE button
Correct keystone distortion (pp.31, 44, 50).

㉔

R-CLICK button
Act as the right mouse button for wireless mouse
operation (p.32).

⑱

ZOOM pq buttons
Zoom in and out the images (p.29).

㉕

⑲

FOCUS buttons
Adjust the focus (p.29).

POINTER button
Act as the On-Off switch for the Pointer (pp.30, 32,
58).

㉖
⑳

RESET/ON/ALL-OFF switch
When using the remote control, set this switch to
“ON”. Set it to “ALL OFF” for power saving when
it is not in use. Slide this switch to “RESET” to
initialize the remote control code.

NUMBER buttons
Act as number buttons. Use these buttons when
setting the remote control codes (p.16) or when
entering the PIN code numbers (pp. 23, 54, 60).

㉑

LENS SHIFT button
Select the Lens Shift function (p.29).

Part Names and Functions
Remote Control Battery Installation

1

Open the battery
compartment lid.



Install new batteries into
the compartment.

Press the lid downward and
slide it.



Replace the
compartment lid.

Two AAA size batteries
For correct polarity (+ and
–), be sure battery terminals
are in contact with pins in the
compartment.

To ensure safe operation, please observe the following precautions :
ü Use two (2) AAA or LR03 type alkaline batteries.
ü Always replace batteries in sets.
ü Do not use a new battery with a used battery.
ü Avoid contact with water or liquid.
ü Do not expose the remote control to moisture or heat.
ü Do not drop the remote control.
ü If the battery has leaked on the remote control, carefully wipe the
case clean and install new batteries.
ü Risk of an explosion if battery is replaced by an incorrect type.
ü Dispose of used batteries according to the instructions.

Remote Control Receivers and Operating Range
Point the remote control toward the projector (to Infrared Remote
Receivers) when pressing the buttons. Maximum operating range
for the remote control is about 16.4’ (5 m) and 60 degrees in front,
back and top of the projector.

16.4’
(5 m)

Infrared Remote Receivers are provided in front, back and top of of
the projector. You can conveniently use all of the receivers (pp. 10,
11, 57).

PNote:
When	hanging	the	projector	from	the	ceiling,	select	the	Infrared	
Remote	Receiver	which	is	located	farther	away	from	the	fluorescent	
light	(p.57).

16.4’
(5 m)

Wired Remote Control Transmitter
The remote control can be used as a wired remote control. Wired
remote control helps you use the remote control outside of the
operating range (16.4’/ 5 m). Connect the remote control and the
projector with the remote control cable (sold separately). Connected
with the remote control cable, the remote control does not emit
wireless signal.

15

Part Names and Functions
Remote Control Code
The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the remote control
codes prevents interference from other remote controls when several projectors or video equipment next to each other are
operated at the same time. Change the remote control code for the projector first before changing that for the remote control.
See “Remote control” in the Setting Menu on page 56.

1

Press and hold the MENU and a number button (1–8) for
more than five seconds to switch between the codes.



To initialize the remote control code, slide the RESET/ ON/
ALL-OFF switch to “RESET”, and then to “ON”. The initial
code is set to Code 1.

MENU button

Number buttons
(1-8)

RESET/ON/ALL
OFF Switch

Press and hold the MENU and a number button
(1-8) that corresponds to the remote control code
for more than five seconds to switch between the
codes.

Adjustable Feet
Projection angle can be adjusted up to 4.0 degrees with the
adjustable feet.
Rotate the adjustable feet and tilt the projector to the proper height;
to raise the projector, rotate the both feet clockwise.
To lower the projector or to retract the adjustable feet, rotate the
both feet counterclockwise.
To correct keystone distortion, press the KEYSTONE button on the
remote control or select Keystone from the menu (see pages 14,
31, 44, 50).

Adjustable Feet

16

Installation
Positioning the Projector
For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the screen. (for
PLC-XM80)

PNote:
	 •	The	brightness	in	the	room	has	a	great	influence	on	picture	quality.	It	is	recommended	to	limit	ambient	
				lighting	in	order	to	obtain	the	best	image.
	 •	All	measurements	are	approximate	and	may	vary	from	the	actual	sizes.
(Inch Diagonal)

75.1' (22.9 m)
44.3’(13.5 m)
33.2’(10.1 m)

400”

Max. Zoom

236”

Min. Zoom

400”

22.0’ (6.7 m)

300”

10.9’ (3.3 m)

200”

4.3'(1.3 m)

177”

100”

118”

59”

(Center)

40”

Screen Size
(W x H) mm
4:3 aspect ratio

40”

100”

200”

300”

400”

610 x 457

2032 x 1524

4064 x 3048

6096 x 4572

8128 x 6096

Zoom (max.)

4.3'(1.3 m)

10.9’ (3.3 m)

22.1’ (6.7 m)

33.2’(10.1 m)

44.3’(13.5 m)

Zoom (min.)

7.4'(2.3 m)

18.7' (5.7 m)

37.6' (11.5 m)

56.5' (17.2 m)

75.1' (22.9 m)

Lens Shift Adjustment
Projection lens can be moved from side to side and up and down with the motor-driven lens shift function. This function
makes the positioning of images easy on the screen. (See page 27)

Lens shift adjustable range

The display position
can be shifted upward
up to 50% elevation of
the display.

50%

The display position can
be shifted downward up
to 50% low level of the
display.

When the lens is shifted to top.

When the lens is shifted to bottom.
10%

The display position can
be shifted to the left in
up to 10% width of the
display.

The display position can
be shifted to the right in
up to 10% width of the
display.

Lens shift center position

When the lens is shifted to leftmost.

Shift range

When the lens is shifted to rightmost.

17

Installation
Lens Installation
When replacing the lens or using an optional lens, install the lens by following the instructions below. Ask the
sales dealer for detailed information of the optional lens specifications.

Removing the lens

1

Shift the lens to the center position by using the Lens
shift function (p.27).



Turn off the projector and unplug the AC power cord.



While pressing the Lens release button on the top
of the cabinet, turn the lens counterclockwise until
it stops and pull it out slowly from the projector.

Lens release button

CAUTION
Be careful when handling the lens. Do not drop.

Attaching the lens to the projector

1

Remove the lens mount cover.



Fit the lens to the projector by aligning the red dot on
the lens with the red dot of the projector.



Slowly turn the lens clockwise until it clicks. Make sure
that the lens is fully inserted to the projector.
CAUTION
Do not press the lens release button when attaching
the lens.

NOTES ON LENS INSTALLATION

ü Do not touch or remove any parts except the lens and related parts. It may result in
malfunctions, electrical shock, fire hazard or other accidents.

ü Before installing or replacing the lens, check that the Model No. of the Projection Lens
matches to the projector.

ü For details of the lens and installation, contact the sales dealer where you purchased the
projector.

18

Red dots

Installation
Connecting to a Computer (Digital and Analog RGB)
Cables used for connection
• VGA Cable (One cable is supplied.)
• DVI-Digital cable ⁄
• BNC cable ⁄

Monitor Output

BNC
cable

G B R H/V V

(⁄ = Cables not supplied with this projector.)
• Serial Cross cable ⁄
• USB cable

Serial out

Serial Cross
cable

CONTROL PORT

Unplug	the	power	cords	of	both	the	projector	
and	external	equipment	from	the	AC	outlet	
before	connecting	cables.

Monitor Input 

Monitor Output

VGA
cable

VGA
cable

ANALOG OUT

ANALOG IN

Monitor Output USB port

DVI-Digital
cable

USB
cable

DIGITAL IN

USB

 See the next page for the signals that can output to the ANALOG
OUT terminal.

19

Installation
Connecting to Video Equipment (Video, S-video)
Cables used for connection (⁄ = Cables not supplied with this projector.)
• Video cable (RCA x 1 or RCA x 3) ⁄
• BNC cable (BNC x 1 or BNC x 3) ⁄
• S-video cable ⁄
• Scart-VGA cable ⁄
• DVI-Digital cable ⁄

Analog Out Signal Table

Input 1

Input 2

Unplug	the	power	cords	of	
both	the	projector	and	external	
equipment	from	the	AC	outlet	
before	connecting	cables.

Input Terminal
RGB (PC analog)
RGB (SCART)
RGB (PC digital)
DVI-D
RGB (AV HDCP)
RGB
Video
5 BNC
Y, Pb/Cb, Pr/Cr
Y, Pb/Cb, Pr/Cr
RCA
S-video
S-video
Video
Video

D-sub15

Input 3

Component
Composite Video Output
Component Composite
(Y, Pb/Cb, Cr/Pr) Video Output Video
Video

Monitor Out
YES
NO
NO
NO
YES
YES
YES
YES
NO
YES

S-video
Output

Cable

⁄

⁄
⁄
⁄

A cable with one
end D-sub 15 and
the other end (Black
box) compatible with
each equipment is
necessary.

⁄

RGB Scart
21-pin Output

Digital Output
(HDCP
compatible)

Refer to the
Analog Out
Signal Table
(above).
BNC
cable

Video Y - Pb/Cb - Pr/Cr

0

RCA
cable

Y - Pb/Cb - Pr/Cr Video

S-video
cable

ANALOG OUT

S-VIDEO

Scart-VGA
cable

ANALOG IN

DVI-Digital
cable

DIGITAL IN

Installation
Connecting for Audio Signal
Cables used for connection (⁄ = Cables not supplied with this projector.)
• Audio cable ⁄

External Audio Equipment
Audio Output
Audio Output (R)

(L)

(R) (L)

Audio Input

Audio
cable
(stereo)

Audio
cable
(stereo)

AUDIO IN 1/2

Audio
cable
Audio
cable
(stereo)
(R) (L)
AUDIO OUT
(stereo)

Unplug	the	power	cords	of	both	the	
projector	and	external	equipment	from	the	
AC	outlet	before	connecting	cables.

1

Installation
Connecting the AC Power Cord
This projector uses nominal input voltages of 100–240 V AC and
it automatically selects the correct input voltage. It is designed to
work with single-phase power systems having a grounded neutral
conductor. To reduce the risk of electrical shock, do not plug into
any other type of power system.
If you are not sure of the type of power being supplied, consult
your authorized dealer or service center.
Connect the projector with all peripheral equipment before turning
on the projector.

Connect the AC power cord (supplied) to the
projector.

CAUTION
The AC outlet must be near this equipment and must be easily
accessible.

PNote:
		 Unplug	 the	AC	 power	 cord	 when	 the	 projector	 is	 not	 in	 use.	 When	
the	 projector	 is	 connected	 to	 an	 outlet	 with	 AC	 power	 cord,	 it	 is	 in	
stand-by	mode	and	consumes	a	little	electric	power.

NOTE ON THE POWER CORD
AC power cord must meet the requirements of the country where you use the projector.
Confirm the AC plug type with the chart below and proper AC power cord must be used.
If the supplied AC power cord does not match your AC outlet, contact your sales dealer.

Projector side

AC Outlet side
For the U .S .A . and Canada

For Continental Europe

For the U .K .

Ground

To POWER CORD
CONNECTOR on your
projector.



To the AC Outlet.
(10 V AC)

To the AC Outlet.
(00–40 V AC)

To the AC Outlet.
(00–40 V AC)

Basic Operation
Turning On the Projector

1

Complete peripheral connections (with a computer, VCR, etc.)
before turning on the projector.



Connect the projector’s AC power cord into an AC outlet. The
LAMP indicator lights red and the POWER indicator lights
green.



Press the ON/STAND-BY button on the side control or the ON
button on the remote control. The LAMP indicator dims and the
cooling fans start to operate. The preparation display appears
on the screen and the countdown starts.

4

After the countdown, the input source that was selected the last
time and the Lamp control status icon (see page 55) appear on
the screen.

If the projector is locked with a PIN code, PIN code input dialog
box will appear.
PNote:
	 •	When	the	Logo	select	function	is	set	to	Off,	the	logo	will	not	be	
shown	on	the	screen	(p.52).
	 •	When	Countdown off or	Off	is	selected	in	the	Display	function,	
the	countdown	will	not	be	shown	on	the	screen	(p.52).
	 •	When	the	Input	button	function	is	set	to	Mode 3,	the	input	signal	
will	be	searched	automatically	(p.51).
	 •	If	you	press	the	ON/STAND-BY	button	on	the	top	control	or	
the	remote	control	during	the	countdown	period,	you	can	skip	
the	countdown	and	go	to	the	normal	operations.	In	this	case,	
however,	the	brightness	of	the	image	needs	some	time	to	
stabilize	after	turning	on	the	projector.	The	display	may	flicker	
after	turning	on	the	lamp	for	the	characteristics	of	the	lamp.	This	
is	normal	operation	and	not	a	malfunction.

16

The preparation display will disappear after 30 seconds.
Selected Input Source and Lamp control
Input 1
RGB(PC analog)

Lamp control status
(See page 55 for Lamp control status.)

PNote:
	 	 The	Lamp	replacement	icon	and	the	Filter	replacement	
or	 the	 Filter	 cartridge	 replacement	 icon	 may	 appear	
on	 the	 screen	 depending	 on	 the	 usage	 state	 of	 the	
projector.

Enter a PIN code
Use the Point pq buttons on the side control or Number buttons
on the remote control to enter a number.

PIN Code Input Dialog Box

When using side control
Use the Point pq buttons on the side control to select a number.
Press the Point u button to fix the number and move the red
frame pointer to the next box. The number changes to ⁄. Repeat
this step to complete entering a four-digit number. After entering
the four-digit number, move the pointer to “Set”. Press the
SELECT button so that you can start to operate the projector.
When using remote control
Press the Number buttons on the remote control to enter a number
(p.14). When you complete entering a four-digit number, the
pointer moves to “Set”. Press the SELECT button so that you can
start to operate the projector.
If you fixed an incorrect number, use the Point t button to move
the pointer to the number you want to correct, and then enter the
correct number.

After the OK icon disappears, you can operate the projector.

PNote:
	 •	If	the	PIN	code	number	is	not	entered	within	three	
minutes	after	the	PIN	code	dialog	box	appeared,	the	
projector	will	be	turned	off	automatically.
	 •	The	"1234"	is	set	as	the	initial	PIN	code	at	the	factory.

If you entered an incorrect PIN code, “PIN code” and the number
(⁄⁄⁄⁄) will turn red for a moment. Enter the correct PIN code all
over again.



Basic Operation

What is PIN code?
PIN (Personal Identification Number) code is a security code that
allows the person who knows it to operate the projector. Setting a
PIN code prevents unauthorized use of the projector.
A PIN code consists of a four-digit number. Refer to the PIN code
lock function in the Setting Menu on page 59-60 for locking operation
of the projector with your PIN code.

CAUTION ON HANDLING PIN CODE
If you forget your PIN code, the projector can no longer
be started. Take a special care in setting a new PIN
code; write down the number in a column on page 84 of
this manual and keep it on hand. Should the PIN code
be missing or forgotten, consult your dealer or service
center.

Turning Off the Projector

1

Press the ON/STAND-BY button on the side control or the
STAND-BY button on the remote control, and Power off?
appears on the screen.



Press the ON/STAND-BY button on the side control or the
STAND-BY button on the remote control again to turn off the
projector. The LAMP indicator lights bright and the POWER
indicator turns off. After the projector is turned off, the cooling
fans operate for 90 seconds. You cannot turn on the projector
during this cooling down period.



When the projector has cooled down enough, the POWER
indicator lights green and then you can turn on the projector.
To unplug the AC power cord, wait until the projector is
completely cooled down.

TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU
TURN THE PROJECTOR ON, WAIT AT LEAST FIVE
MINUTES BEFORE TURNING IT OFF.
DO NOT UNPLUG THE AC POWER CORD WHILE
COOLING FANS ARE RUNNING OR BEFORE THE
POWER INDICATOR LIGHTS GREEN AGAIN.
OTHERWISE IT WILL RESULT IN SHORTENING OF
THE LAMP LIFE.
DO NOT OPERATE THE PROJECTOR CONTINUOUSLY
WITHOUT REST. CONTINUOUS USE MAY RESULT
IN SHORTENING THE LAMP LIFE. TURN OFF THE
PROJECTOR AND LET STAND FOR ABOUT AN HOUR
IN EVERY 24 HOURS.

4

Power off? disappears after 4 seconds.

PNote:
	 •	When	the	On	start	function	is	set	to	On,	the	projector	
will	be	turned	on	automatically	by	connecting	the	AC	
power	cord	to	an	AC	outlet	(p.58).
	 •	The	running	speed	of	cooling	fans	is	changed	
according	to	the	temperature	inside	the	projector.
	 •	Do	not	put	the	projector	in	a	case	before	the	projector	
is	cooled	enough.
	 •	If	the	WARNING	TEMP.	indicator	blinks	red,	see	
“Warning	Indicators”	on	page	69.
	 •	The	projector	cannot	be	turned	on	during	the	cooling	
period	with	the	POWER	indicator	turned	off.	You	can	
turn	it	on	again	after	the	POWER	indicator	becomes	
green	again.

Basic Operation
How to Operate the On-Screen Menu
The projector can be adjusted or set via the On-Screen Menu.
The menus have a hierarchical structure, with a main menu that
is divided into submenus, which are further divided into other
submenus. For each adjustment and setting procedure, refer to
respective sections in this manual.

Side Control
MENU button
SELECT button

1

Press the MENU button on the side control or the remote
control to display the On-Screen Menu.
POINT buttons



Use the Point pq buttons to highlight or select a main menu
item. Press the Point u or the SELECT button to access the
submenu items. (The selected item is highlighted in orange.)

Remote Control
MENU button



Use the Point pq buttons to select the desired submenu item
and press the SELECT button to set or access the selected
item.

POINT buttons
SELECT button

4

Use the Point pqt u buttons to adjust the setting or switch
between each option and press the SELECT button to activate
it and return to the submenu.

5

Press the Point t button to return to the main menu. Press
the MENU button to exit the On-Screen Menu.

On-Screen Menu
Standard
Real
Image 1
Image 2
Image 3
Image 4
Image 5
Image 6
Image 7
Image 8
Image 9
Image 10

Point
u

or SELECT
button

The currently
set item is
check marked.

The selected item is
highlighted in orange.

Standard
Real
Image 1
Image 2
Image 3
Image 4
Image 5
Image 6
Image 7
Image 8
Image 9
Image 10
Network

5

Basic Operation
Menu Bar
For detailed functions of each menu, see “Menu Tree” on pages 73-75.
Main Menu

Sub-Menu

①

Ç
É
Ñ
Ö
Ü
á
à
â
ä
① Input

Used to select an input source (Input 1, Input , Input  ) (p.33).

Ç PC adjust
Used to adjust the parameters to match with the input signal format (pp.37-39).
É Image select
For computer source, used to select an image level among Standard, Real, and Image 1-10 (p.40).
For Video source, used to select an image level among Standard, Cinema, and Image 1-10 (p.46).
Ñ Image adjust
For computer source, used to adjust the computer image. [Contrast/Brightness/Color temp ./White balance (R/G/B)/
Offset(R/G/B)/Sharpness/Gamma/Reset/Store] (pp.41-42).
For Video source, used to adjust the video image. [Contrast/Brightness/Color/Tint/Color temp ./White balance (R/G/
B)/Offset (R/G/B)/Sharpness/Gamma/Noise Reduction/Progressive/Reset/Store] (pp.47-48).
Ö Screen
For computer source, used to adjust the size of the image. [Normal/True/Wide/Full/Custom/Digital zoom +/-/Keystone/
Ceiling/Rear/Reset] (pp.42-44).
For Video source, used to adjust the size of the image. [Normal/Wide/Custom/Keystone/Ceiling/Rear/Reset] (pp. 4950).
Ü Sound
Used to adjust the volume or mute the sound (p.28).
á Setting
Used to set the projector’s operating configurations (pp.51-62).
à Information
Display the input source information: Input, H-sync freq ., V-sync freq ., Screen, Language, Lamp status, Lamp counter,
Filter counter, Power management, Key lock, PIN code lock, Simple mode, Remote control, and SERIAL NO . (p.29).
â Network
See the owner’s manual of “Network Set-up and Operation”.
ä Guide

The key operation is displayed.

6

Basic Operation
Operating with Projector Control
Lens Operation

Side Control

The following lens operation can be made with the Lens button on
the side control.
Press the LENS button to enter each lens operation mode. The
selected adjustment display appears on the screen.
Zoom " Focus " Lens Shift " • • • • •
LENS button

Zoom Adjustment
Display Zoom on the screen. Use the Point pq buttons to
zoom in and out the image.

INFO . button

POINT buttons

Focus Adjustment
Display Focus on the screen. Use the Point pq buttons to
adjust focus of the image.

Zoom

Lens Shift Adjustment
Display Lens shift on the screen. Use the Point pqt u
buttons to position the screen to the desired point without having
picture distortion.
The screen can be moved up or down to 50 percent, or sideways
up to 10 percent from the central axis of the lens shift.
Press and hold the LENS SHIFT button for more than 5 seconds
to return to the central position.

Ô



Ô

Lens shift

Ô

PNote:
	 •	The	 arrow	 disappears	 at	 the	 maximum	 lens	 shift	 in	 each	
direction.
	 •	The	 arrow	 turns	 red	 when	 the	 lens	 shift	 comes	 to	 the	
center	position	of	the	screen.

Focus

INFO . button
Information display can be used to confirm the current operating
condition of the projector and the signal being projected through
the projector.
Press the INFO. button on the remote control to display the
information window on the screen. To hide the information
window, press the INFO. button again or press the MENU button.
The information window can also be selected from the
menu.

Information Menu

PNote:
•	The	H-sync	freq.	and	V-sync	freq.	values	described	in	the	
			figure	may	be	different	from	the	actual	values.
•	SERIAL NO.	is	used	to	service	the	projector.

7

Basic Operation
Sound Adjustment
Direct Operation

Side Control
VOLUME +/– buttons

Volume
Press the VOLUME+/– buttons on the side control or on the
remote control to adjust the volume. The volume dialog box
appears on the screen for a few seconds.

Mute
Press the MUTE (Point q) button on the remote control to select
On to temporarily turn off the sound. To turn the sound back on,
press the MUTE (Point q) button again to select Off or press the
VOLUME +/– buttons. The Mute function is also effective for the
AUDIO OUT jack.

Remote Control
VOLUME – button

VOLUME + button

Menu Operation

1


Press the MENU button to display the On-Screen Menu. Use
the Point pq buttons to select Sound. Press the Point u or
the SELECT button to access the submenu items.

MUTE (Point q) button

Volume Dialog Box

Approximate level
of the volume.

Use the Point pq buttons to select the desired submenu item
and press the SELECT button to access the selected item.

Press the Point q button to set the
Mute function On or Off. The dialog box
disappears after 4 seconds.

Volume
Press the Point p button to turn up the volume; press the Point q
button to turn down the volume.

Built-in SP
Press the Point pq buttons to switch the Built-in SP function On/
Off. When the Built-in SP sound is turned off, Off is displayed.

Mute
Press the SELECT button to switch the mute function On/Off.
When the sound is turned off, On is displayed. Press the VOLUME
+/– buttons again to turn the sound back on.

8

Sound Menu

Basic Operation
Operating with Remote Control
Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to
make the desired operation quickly without calling up the On-Screen Menu.

AUTO PC button
Press the AUTO PC button on the remote control to operate the
Auto PC adj. function. The computer screen adjustment can be
done easily by pressing this button. See page 37 for details.

SCREEN button
Press the SCREEN button on the remote control to select the
desired screen size. The selected screen size symbol appears
on the screen for 4 seconds. See pages 42 to 44 and 49 to 50
for details. Press and hold the SCREEN button for more than 5
seconds to return all the screen size adjustment setting to the
factory default setting.

NO SHOW button
Press NO SHOW button on the remote control to black out the
image. To restore to normal, press the NO SHOW button again or
press any other button. The NO SHOW symbol appeares on the
.screen for 4 seconds.

D .ZOOM button

Remote Control

AUTO PC
button

INFO . button

SCREEN
button

NO SHOW
button

D .ZOOM
button

ZOOM
buttons

LENS SHIFT
button
FOCUS
buttons

Press the D.ZOOM button on the remote control to enter to the
Digital zoom +/– mode. See page 43 for details.

LENS SHIFT button
See page 27 for details.

PNote:
	 		See	the	next	page	for	the	description	of	other	
buttons.

ZOOM buttons
Press the ZOOM buttons on the remote control to zoom in and out
the image.

FOCUS buttons
Press the FOCUS buttons on the remote control to adjust focus of
the image.

INFO button
Press the INFO. button on the remote control to display the
information window on the screen. See page 27 for details.

9

Basic Operation

MOUSE POINTER button

Remote Control

Move the pointer on the screen with this button.

POINTER button
Press POINTER button on the remote control to display the Pointer
on the screen. (pp.32, 58)
MOUSE
POINTER button

P-TIMER button
Press the P-TIMER button on the remote control to operate the
Count up/Count down function. Refer to p.58 for detail of Setting for
the P-timer function.

POINTER button
P-TIMER button

To stop the count time, press the P-TIMER button.
To cancel the P-timer function, press and hold the P-TIMER button.

FREEZE button

FREEZE button
Press the FREEZE button on the remote control to freeze the
picture on the screen and mute the sound. To cancel the FREEZE
function, press the FREEZE button again or press any other button.
Fig.1 will appear when the Freeze function is working.

Fig.1

0

PNote:
See	 the	 previous	 page	 for	 the	 description	 of	
other	buttons.

Basic Operation
Keystone Correction
If a projected picture has keystone distortion, correct
the image with Keystone adjustment.
It is not available when On-Screen menu is displayed.

Remote Control
POINT pq buttons

Press the KEYSTONE button on the remote control. The keystone
dialog box appears.
Correct keystone distortion by pressing the
Point pq buttons on the remote control. Keystone
adjustment can be memorized. (p.50)

KEySTONE button

PNote:

Reduce the upper width
with the Point p button.

Reduce the lower width
with the Point q button.

•	The	white	arrows	indicate	that	there	is	no	correction.
•	A	red	arrow	indicates	the	direction	of	correction.
•	An	arrow	disappears	at	the	maximum	correction.
•	If	you	press	and	hold	the	KEYSTONE	button	for
		more	than	3	seconds	while	the	Keystone	correction	
dialog	box	is	being	displayed,	the	Keystone	
correction	adjustment	will	be	released.
•	The	 adjustable	 range	 is	 limited	 depending	 on	 the	
input	signal.	

1

Basic Operation
Pointer Function
You can move the Pointer of the projector with the remote control to emphasize a part of the projected image.

1

Press the POINTER button to activate the Pointer function.



Use the MOUSE POINTER button to move the Pointer.



To cancel the Pointer function, press the POINTER button
again or press any other button.

Arrow

Dot

MOUSE POINTER button

POINTER button

Finger



PNote:
You	can	choose	the	pattern	of	Pointer	(Dot/Arrow/Finger)	in	the	
Setting	Menu	(p.58)

Wireless Mouse Operation
The remote control can be used as a wireless mouse for your computer.

1



Before operating the wireless mouse, connect your computer
and the projector with the supplied USB cable (p.19).
When the Pointer function is used, the wireless mouse is not
available.

When a USB cable is connected to the computer and the
projector, turn on the projector first, then the computer. If you
turn on the computer first, the wireless mouse function may
not operate properly.

MOUSE POINTER
button
Move the pointer on the
screen with this button.

R-CLICK button
Acts as right (click)
mouse button while the
projector and a computer
are connected with a USB
cable.

L-CLICK button
Acts as left (click) mouse
button while the projector
and a computer are
connected with a USB
cable.



Input Selection
Direct Operation
Side Control/Remote Control Operation
Side Control

Remote Control
INPUT button*

INPUT button*

* Only the Input button function is set Mode 1 in the Setting menu, the INPUT button is used for switching
input source. (p.51)
The input source changes each time you press the INPUT button on the side control or the remote control as follows:
Input 1 ® Input 2 ® Input 3 ® ...
Before using the INPUT button on the side control or the remote control, you must select a correct input source by OnScreen Menu and the latest input source will be displayed.

Remote Control Operation
Press the INPUT 1, INPUT 2, or INPUT 3 button on the remote control. The input source appears on the screen as you
press each button. Select the connected input source.
INPUT 1 button

INPUT  button

Input 1

Input 

RGB (PC analog)

Video

RGB (Scart)

y,Pb/Cb,Pr/Cr

Remote Control

INPUT 1//
buttons

RGB (PC digital)

RGB

RGB (AV HDCP)

INPUT  button
Input 
Video
y,Pb/Cb,Pr/Cr
S-video



Input Selection
Computer Input Source Selection
Menu Operation

1

Press the MENU button to display the On-Screen Menu. Use
the Point pq buttons to select Input and then press the
Point u or the SELECT button.



Use the Point pq buttons to select the desired input and
then press the Point u button to access the submenu items.



Use the Point pq buttons to select the desired source and
then press the SELECT button.

INPUT MENU
Input 1
Input 2
Input 3

RGB(PC analog)
RGB
Video

System

Auto

Input 1
Input 2
Input 3

RGB(PC analog)
RGB
Video

System

SVGA 1

WHEN SELECTING INPUT 1 (COMPUTER INPUT
TERMINALS )
RGB(PC analog)
When your computer is connected to the INPUT 1 (ANALOG)
terminal, select RGB (PC analog).
RGB(PC digital)
When your computer is connected to INPUT 1 (DIGITAL)
terminal, select RGB(PC digital).

INPUT 1 MENU
Input 1
RGB(PC analog)
RGB(Scart)
RGB(PC digital)
RGB(AV HDCP)

PNote:
	 	 Input	source	changes	if	the	INPUT	1	button	on	the	remote	control	is	
pressed.

WHEN SELECTING INPUT  (5 BNC INPUT jACKS )
When connecting the computer output [5 BNC Type (Green, Blue,
Red, Horiz. Sync, and Vert. Sync.)] from the computer to G, B, R,
H/HV, and V jacks:

RGB
When your computer is connected to the INPUT 2 (5 BNC
INPUT JACKS) terminal, select RGB.

4

INPUT  MENU
Y,Pb/Cb,Pr/Cr

Input Selection
Video Input Source Selection
Menu Operation

1

Press the MENU button to display the On-Screen Menu. Use
the Point pq buttons to select Input and then press the
Point u or the SELECT button.



Use the Point pq buttons to select the desired input and
then press the Point u button to access the submenu items.



Use the Point pq buttons to select the desired source and
then press the SELECT button.

INPUT 1 MENU

WHEN SELECTING INPUT 1 (COMPUTER INPUT
TERMINALS )
When connecting to video equipment, select the type of Video
source in the Source Select Menu.
RGB(Scart)
When scart video equipment is connected to the INPUT 1
(ANALOG) terminal, select RGB (Scart).

PNote:

RGB(AV HDCP)
If the HDCP-compatible signal source is connected to the
INPUT 1 (DIGITAL) terminal, select RGB (AV HDCP).

WHEN SELECTING INPUT  (5 BNC INPUT jACKS )

	 	 HDCP	(High-bandwidth	Digital	Content	Protection)	is	
a	system	for	protecting	digital	entertainment	content	
which	is	delivered	by	DVI	(Digital	Visual	Interface)	from	
being	copied.	The	specification	of	HDCP	is	decided	and	
controlled	by	Digital	Content	Protection,	LLC.	Should	the	
specification	be	changed,	this	projector	may	not	display	
the	digital	content	protected	by	HDCP.

INPUT  MENU

When connecting to video equipment, select the type of Video
source in the Source Select Menu.
Video
y,Pb/Cb,Pr/Cr

Y,Pb/Cb,Pr/Cr

When the video input signal is connected to the
VIDEO jack, select Video.
When the video input signal is connected to the
Y-Pb/Cb-Pr/Cr jacks, select y,Pb/Cb,Pr/Cr.

PNote:
	 •	When	the	video	input	signal	is	connected	to	the	Y-Pb/Cb-Pr/Cr	jacks,	
Y,Pb/Cb,Pr/Cr takes	precedence	of	RGB.
	 •	Y,Pb/Cb,Pr/Cr	input	can	accept	the	component	signal	and	the	analog	
RGB	signal.	When	analog	RGB	signal	is	not	recognized	in	Y,Pb/Cb,Pr/
Cr	input	source,	set	to	RGB	input	manually.

WHEN SELECTING INPUT  (AV TERMINALS )

INPUT  MENU
Y,Pb/Cb,Pr/Cr

When connecting to video equipment, select the type of Video
source in the Source Select Menu.
Video

When the video input signal is connected to the
VIDEO jack, select Video.

y,Pb/Cb,Pr/Cr

When the video input signal is connected to the
Y-Pb/Cb-Pr/Cr jacks, select y,Pb/Cb,Pr/Cr.

S-video

When the video input signal is connected to the
S-VIDEO jack, select S-video.

5

Computer Input
Computer System Selection
Automatic Multi-Scan System
This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC adjustment. If a
computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper
image without any additional settings. (Signal formats provided in this projector are shown on pages 79-80)
One of the following messages may appear when:

Auto

The projector cannot recognize the connected signal
conforming to the provided PC Systems. Auto is
displayed on the System Menu box and the Auto PC
adjustment function works to display proper images.
If the image is not projected properly, a manual
adjustment is required (pp.38-39).

-----

There is no signal input from the computer. Check the
connection between your computer and the projector.
(See “Troubleshooting” on pp.70-72.)

Mode 1

The preset system is manually adjusted in the PC
adjust Menu. The adjusted data can be stored in Mode
1-10 (pp.38-39).

SVGA 1

PC Systems provided in this projector is chosen. The
projector chooses a proper system provided in the
projector and displays it.

PC System Menu

The PC System Menu
Selected system is
displayed.

*Mode 1 and SVGA 1 are examples.

Selecting Computer System Manually
PC system can also be selected manually.

1

Press the MENU button to display the On-Screen Menu. Use
the Point pq buttons to select Input and then press the Point
u or the SELECT button.



Use the Point pq buttons to select Systerm and then press
the Point u or the SELECT button.



Use the Point pq buttons to select the desired system and
then press the SELECT button.

PC System Menu

Customized Mode (1-10) set in
the PC adjust Menu (pp.38-39).

Systems in this dialog box
can be selected.

6

Computer Input
Auto PC Adjustment
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Position H and Position V positions to
conform to your computer.

Direct Operation

Remote Control

The Auto PC adjustment function can be operated directly by
pressing the AUTO PC button on the remote control.

AUTO PC button

Menu Operation
Auto PC adj .

1


Press the MENU button to display the On-Screen Menu. Use
the Point pq buttons to select PC adjust and then press the
Point u or the SELECT button.
Use the Point pq buttons to select Auto PC adj . and then
press the SELECT button.

PC adjust Menu
Auto PC adj.
Fine sync
Total dots
Position H
Position V
Current mode
Clamp
Display area H
Display area V
Reset
Mode free
Store

0
1366
0
0
0
1024
768

To store the adjusted parameters .
The adjusted parameters from the Auto PC Adjustment can be
stored in the projector. Once the parameters are stored, the setting
can be done just by selecting Mode in PC SYSTEM Menu (p.36).
See “Manual PC Adjustment” on pages 38-39.

PNote:
	 •	Fine	sync,	Total	dots,	Position	H	and	Position	V	of	certain	computers	
cannot	be	fully	adjusted	with	the	Auto	PC	Adjustment	function.	
When	the	image	is	not	provided	properly	with	this	operation,	manual	
adjustments	are	required.	(pp.38-39)
	 •	Auto	PC	Adjustment	cannot	be	operated	in	Digital	Signal	Input	on	the	
DVI	terminal	and	480p,	575p,	480i,	575i,	720p,	1035i,	1080i	or	1080p	is	
selected	on	the	PC	SYSTEM	Menu.
	 •	Depending	on	the	condition	of	signals	and	the	type	and	length	of	
cables,	the	signals	may	not	be	properly	viewed.

Use the Point pq buttons to select Auto PC
adj . and press the SELECT button.
Please wait . . . appears while the Auto PC
adjustment is in process.

Auto PC adj.
Fine sync
Total dots
Position H
Position V
Current mode
Clamp
Display area H
Display area V
Reset
Mode free
Store

0
1366
0
0
0
1024
768

7

Computer Input
Manual PC Adjustment
Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. Manual PC
Adjustment enables you to precisely adjust several parameters to match those special signal formats. The projector has
10 independent memory areas to store those parameters manually adjusted. It allows you to recall the setting for a specific
computer.

PNote: The	PC	Adjust	Menu	cannot	be	operated	when	the	digital	signal	input	on	the	DVI	terminal	is	selected	on	PC	System	
Menu.

1


Press the MENU button to display the On-Screen Menu. Use
the Point pq buttons to select PC adjust and then press the
Point u or the SELECT button.
Use the Point pq buttons to select the desired item and then
press the SELECT button to display the
adjustment dialog box. Use the Point t u buttons to adjust the
setting value.

PC adjust Menu
Auto PC adj.
Fine sync
Total dots
Position H
Position V
Current mode
Clamp
Display area H
Display area V
Reset
Mode free
Store

0
1366
0
0
0
1024
768

Fine sync
Use the Point t u buttons to adjust the value, eliminating a flicker
from the image displayed (from 0 to 31).
Total dots
Use the Point t u buttons to adjust the number of total dots in one
horizontal period to match your PC image.

Position H

Auto PC adj.
Fine sync
Total dots
Position H
Position V
Current mode
Clamp
Display area H
Display area V
Reset
Mode free
Store

0
1366
0
0
0
1024
768

Use the Point t u buttons to adjust the horizontal picture position.

Position V
Use the Point t u buttons to adjust the vertical picture position.

Current mode
Press the SELECT button to show H-sync freq. and V-sync freq. of
the connected computer.
Clamp
Use the Point t u buttons to adjust the clamp level. When the
image has dark bars, try this adjustment.
Display area H
Use the Point t u buttons to adjust the horizontal area displayed
by this projector.
Display area V
Use the Point t u buttons to adjusts the vertical area displayed by
this projector.

8

Auto PC adj.
Fine sync
Total dots
Position H
Position V
Current mode
Clamp
Display area H
Display area V
Reset
Mode free
Store

0
1366
0
0
0
1024
768

Computer Input

Reset
To reset the adjusted data, select Reset and press the SELECT
button. A confirmation box appears and then select yes. All
adjustments will return to their previous figures.

Mode free
Mode free
To clear the stored data, select Mode free and then press the Point
u or the SELECT button. Move the highlight to the Mode that you
want to clear and then press the SELECT button.

Store
To store the adjusted data, select Store and then press the Point u
or the SELECT button. Move the highlight to one of the Modes 1 to
10 in which you want to store, and then press the SELECT button.

This mode has stored
parameters.
Where to free?

Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
Mode 7
Mode 8
Mode 9
Mode 10

Total dots
Position H
Position V
Display area H
Display area V

Values of Total dots, Position H,
Position V, Display area H and
Display area V.

1344
0
255
034
1024
768

Press the SELECT
button to clear the
stored data.

Vacant

Store
Store

Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
Mode 6
Mode 7
Mode 8
Mode 9
Mode 10

Where to store?
store?
Free

Total
Total dots
dots
Position
Position H
H
Position
Position V
V
Display
Display area
area H
H
Display
Display area
area V
V

1344
00
255
0034
1024
768

PNote:
•	Display area (H/V)	cannot	be	selected	when	480i,	575i,	
480p,	575p,	720p,	1035i	,	1080i	or	1080p	is	selected	in	the	PC	
System	Menu	(p.36).
•	When	input	computer	signal	to	the	projector,	PC	adjust	function
will	become	available.

Press the MENU button
to close this dialog box.

Press the SELECT button to
store the data.

9

Computer Input
Image Level Selection
Menu Operation

1

Press the MENU button to display the On-Screen Menu.
Use the Point pq buttons to select Image select and
then press the Point u or the SELECT button.



Use the Point pq buttons to select the desired item
and then press the SELECT button.

Standard
Normal picture level preset on the projector.
Real
Picture level with improved halftone for graphics.
Image 1–10
User preset picture adjustment in the Image adjust Menu (p.42).

40

Image select Menu

Computer Input
Image Adjustment

1


Press the MENU button to display the On-Screen Menu.
Use the Point pq buttons to select Image adjust and
then press the Point u or the SELECT button.

Image adjust Menu
Contrast
Brightness
Color temp.
Red
Green
Blue
Offset
Sharpness
Gamma
Reset
Store

Use the Point pq buttons to select the desired item
and then press the SELECT button to display the
adjustment dialog box. Use the Point t u buttons to
adjust the setting value.

32
32
High
28
32
35
8
8

Contrast
Press the Point t button to decrease the contrast; press the Point
u button to increase the contrast (from 0 to 63).

Selected Image mode

Brightness
Contrast
Brightness
Color temp.
Red
Green
Blue
Offset
Sharpness
Gamma
Reset
Store

Press the Point t button to decrease the brightness; press the
Point u button to increase the brightness (from 0 to 63).

Color temp .
Use the Point t u buttons to select the desired Color temp. level
(XLow, Low, Mid or High).

32
32
High
28
32
35
8
8

White balance (Red)
Press the Point t button to lighten red tone; press the Point u
button to deepen red tone (from 0 to 63).

Use the Point t u
buttons to adjust the
setting value.

White balance (Green)
Press the Point t button to lighten green tone; press the Point u
button to deepen green tone (from 0 to 63).

White balance (Blue)
Press the Point t button to lighten blue tone; press the Point u
button to deepen blue tone (from 0 to 63).

Offset(Red/Green/Blue)
Press the Point t button to lighten red/green/blue tone of the black
level of an image; press the Point u button to deepen red/green/
blue tone of the black level of an image.

Sharpness
Press the Point t button to decrease the sharpness of the image;
press the Point u button to increase the sharpness of the image
(from 0 to 31).

Gamma

PNote:
When	White	balance	Red,	Green	or	Blue	is		
		adjusted,	Color temp.	will	change	to	Adj..

Use the Point t u buttons to adjust the gamma value to obtain a
better balance of contrast (from 0 to 15).

41

Computer Input

Store

Reset
To reset the adjusted data, select Reset and press the SELECT
button. A confirmation box appears and then select yes. All
adjustments will return to their previous figures.

Store
To store the adjusted data, select Store and press the Point u or
the SELECT button. Use the Point pq buttons to select one from
Image 1 to 10 and press the SELECT button.
A confirmation box appears and then select yes. Stored data can
be called up by selecting an Image (1–10) in the Image Mode
Selection on page 40.

A confirmation box appears and
then select yes.

Screen Size Adjustment
Select the desired screen size that conforms to the input
signal source.

1

Press the MENU button to display the On-Screen Menu. Use
the Point pq buttons to select Screen and then press the
Point u or the SELECT button.



Use the Point pq buttons select the desired item and then
press the SELECT button.

SCREEN MENU

Normal
Provide the image at the normal computer aspect ratio of 4:3.

True
Provide the image in its original size. When the original image size
is larger than the screen size (1024 x 768), the projector enters to
the panning mode automatically. Use the Point pqt u buttons
to pan the image. When adjusted, the arrows will turn red. When
reached to the correction limits, the arrows will disappear.

Wide
Provide the image to fit the wide video aspect ratio (16:9) by
expanding the image width uniformly. This function can be used to
provide the squeezed video signal at 16:9.

4

PNote:
		•	The	projector	cannot	display	any	resolution	higher	than	
1920	x	1200.	If	your	computer’s	screen	resolution	is	
higher	than	1920	x	1200,	lower	the	resolution	before	
connecting	the	projector.
	 •	The	image	data	other	than	XGA	(1024	x	768)	is	
modified	to	fit	the	screen	size	in	initial	mode.
	 •	True,	Full and	Digital zoom +/–	cannot	be	selected	
when	no	signal	is	detected	in	the	PC	System	Menu.	
(p.36)

Computer Input

Full
Provides the full screen image.
Custom
Adjust the screen scale and position manually with this function.
Press the Point u button at Custom and the Custom is
displayed on the screen, you can use the Point pq buttons
to choose the item you want to adjust.
Scale H/V ............. Adjust the Horizontal/Vertical screen scale.
H&V ...................... When set to On, the aspect ratio is fixed.
Scale V appears dimmed and becomes
unavailable. Adjust Scale H, then the screen
scale is automatically modified based on the
aspect ratio.
Position H/V ........ Adjust the Horizontal/Vertical screen position.
Common .............. Save the adjusted scale to all the inputs.
Press the SELECT button at Common to
display a confirmation box. To save the scale,
press the SELECT button at yes. When
Custom is selected, the saved scale is used.
Reset ................... Reset the all adjusted values. Press the
SELECT button at Reset to display a
confirmation box. To reset, press the SELECT
button at yes.

Custom

PNote:
•	When	no	signal	is	detected,	Normal	is	set	automatically	
and	the	Aspect	dialog	box	disappears.
	 •	The	adjustable	range	for	Scale H/V	and	Position H/V	is	
limited	depending	on	the	input	signal.

Digital zoom +
Select Digital zoom +. The On-Screen Menu disappears and
D . zoom + appears. Press the SELECT button to expand the
image size. Use the Point pqt u buttons to pan the image. The
Panning function can work only when the image is larger than the
screen size.
You can also enter the Digital zoom + mode by pressing the
D.ZOOM button on the remote control.

Digital zoom Select Digital zoom – . The On-Screen Menu disappears and D .
zoom – appears. Press the SELECT button to compress image
size.
You can also enter the Digital zoom - mode by pressing the
D.ZOOM button on the remote control.
To exit the Digital zoom +/– mode, press any button except the
D.ZOOM button, SELECT and Point buttons.

PNote:
•	The	panning	function	may	not	operate	properly	if	the	
stored	Mode	in	the	PC	adjust	Menu	is	used	(p.39).
	•	The	minimum	compression	ratio	is	limited	depending	
on	the	input	signal,	when	the	Keystone	function	is	
working	or	when	the	custom	is	selected	for	the	screen	
size.
	 •	True,	Full	and	Digital zoom +/– cannot	be	selected	
when	480i,	575i,	480p or	575p	is	selected	in	the	PC	
System	Menu	(p.36).
	 •	Digital zoom +/-	cannot	be	selected	when	Full	or	
True	is	selected.
		•	Digital zoom – cannot	be	operated	when	Custom	is	
selected.

To return to the previous screen size, select a screen size from the
Screen Size Adjustment Menu or select an input source from the
Input Source Selection Menu (see pages 33-35) again or adjust
the screen size with the D.ZOOM button.

4

Computer Input

Keystone
This function is used to adjust keystone distortion of the projected
image. Use the Point pq buttons to choose the item you want to
adjust.

Keystone

t Keystone correction
To correct keystone distortion, press the SELECT button.
Keystone appears on the screen. Use the Point pq buttons to
correct keystone distortion (p.31).
t Store or Reset
To store or reset the keystone correction, press the Point u
button.
Store ....... Keep the keystone correction even when the AC
power cord is unplugged.
Reset ...... Release the keystone correction when the AC
power cord is unplugged.

Ceiling

Ceiling

When this function is set to On, the picture will be top/bottom and
left/right reversed. This function is used to project the image from a
ceiling-mounted projector.

Rear
When this function is set to On, the picture will be left/right
reversed. This function is used to project the image from rear of
the screen.

Reset
This function returns all adjusted values to the factory default
settings. Press the SELECT button at Reset to display a
confirmation box. To reset, press the SELECT button at “Yes.”

44

Rear

Video Input
Video System Selection

1

Press the MENU button to display the On-Screen Menu. Use
the Point pq buttons to select Input and then press the Point
u or the SELECT button.



Use the Point pq buttons to select Video, S-video or Computer
1(Component) and then press the SELECT button.



Use the Point pq buttons to select System and then press
the Point u or the SELECT button. Use the Point pq buttons
to select the desired system and then press the SELECT
button.

AV System Menu (Video or S-video)

Video jack or S-video jack
Auto
The projector automatically detects an incoming video system, and
adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select the system
manually.

PAL/SECAM/NTSC/NTSC4 .4/PAL-M/PAL-N
If the projector cannot reproduce proper video image, select a
specific broadcast signal format from among PAL, SECAM, NTSC,
NTSC 4 .4, PAL-M, and PAL-N.

y, Pb/Cb, Pr/Cr jacks
Auto

AV System Menu (y, Pb/Cb, Pr/Cr)
Input 1

The projector automatically detects an incoming video signal, and
adjusts itself to optimize its performance.
When the Video System is 105i, 1080i or 1080p, select the
system manually.

RGB(PC analog)

Input 2

RGB

Input 3

Y, Pb/Cb, Pr/Cr

System

Auto

y, Pb/Cb, Pr/Cr SIGNAL FORMAT
If the projector cannot reproduce proper video image, select a
specific component video signal format from among 480i, 575i,
480p, 575p, 70p, 105i, 1080i, and 1080p.

PNote:
The	AV	System	Menu	cannot	be	selected	when	selecting	
RGB (Scart).

45

Video Input
Image Level Selection
Menu Operation

1

Press the MENU button to display the On-Screen Menu. Use
the Point pq buttons to select Image select and then press
the Point u or the SELECT button.



Use the Point pq buttons to select the desired item and
then press the SELECT button.

Image select Menu
Standard
Normal picture level preset on the projector.

Cinema
Picture level adjusted with fine tone.

Image 1–10

Standard
Cinema
Image 1
Image 2
Image 3
Image 4
Image 5
Image 6
Image 7
Image 8
Image 9
Image 10

User preset picture adjustment in the Image adjust Menu. (p.48)

Standard
Cinema
Image 1
Image 2
Image 3
Image 4
Image 5
Image 6
Image 7
Image 8
Image 9
Image 10

46

Video Input
Image Adjustment

1

Press the MENU button to display the On-Screen Menu. Use
the Point pq buttons to select Image adjust and then press
the Point u or the SELECT button.



Use the Point pq buttons select the desired item and then
press the SELECT button to display the adjustment dialog
box. Use the Point t u buttons to adjust the setting value.

Image adjust Menu

Contrast
Press the Point t button to decrease the contrast; press the Point
u button to increase the contrast (from 0 to 63).
Selected Image mode

Brightness
Press the Point t button to decrease the brightness; press the
Point u button to increase the brightness (from 0 to 63).

Color
Press the Point t button decrease the intensity of the color; press
the Point u button increase the intensity of the color (from 0 to 63).

Tint
Press the Point t u buttons to adjust the tint value to get a proper
color balance (from 0 to 63).

Use the Point t u
buttons to adjust the
setting value.

Color temp .
Use the Point t u buttons to select the desired Color temp. level
(XLow, Low, Mid or High ).

White balance (Red)
Press the Point t button to lighten red tone; press the Point
button to deepen red tone (from 0 to 63).

White balance (Green)
Press the Point t button to lighten green tone; press the Point u
button to deepen green tone (from 0 to 63).

White balance (Blue)
Press the Point t button to lighten blue tone; press the Point u
button to deepen blue tone (from 0 to 63).

PNote:
	•	When	White	balance	Red,	Green	or	Blue	is	adjusted,	the	Color	temp.	level	will	change	to	Adj.
	•	Tint cannot	be	selected	when	the	video	system	is	PAL,	SECAM,	PAL-M or	PAL-N (p.45).

47

Video Input

Offset(Red/Green/Blue)
Press the Point t button to lighten red/green/blue tone of the black
level of an image; press the Point u button to deepen red/green/
blue tone of the black level of an image (from 0 to 63).

Sharpness
Press the Point t button to decrease the sharpness of the image;
press the Point u button to increase the sharpness of the image
(from 0 to 31).

Gamma
Use the Point t u buttons to adjust the gamma value to obtain a
better balance of contrast (from 0 to 15).

Noise reduction
Noise interference on the screen can be reduced. Press the Point
t u buttons to change the noise reduction mode.
Off ........... Noise reduction mode is Off.
On ........... Noise reduction mode is On.

Progressive
An interlaced video signal can be displayed in progressive mode.
Press the Point t u buttons to change the progressive scan mode.
Off ........... Progressive scan mode is Off.
On ........... Progressive scan mode is On .
Film ......... For watching a film. With this function, the projector
reproduces pictures faithful to the original film quality.

Reset
To reset the adjusted data, select Reset and press the SELECT
button. A confirmation box appears and then select yes. All
adjustments will return to their previous figures.

Store

Store
To store the adjusted data, select Store and press the Point u or
the SELECT button. Use the Point pq buttons to select one from
Images 1 to 10 and press the SELECT button.
A confirmation box appears and then select yes. Stored data can
be called up by selecting an Image (1-10) in the Image Mode
Selection on page 46.

PNote:
	 •	Noise reduction	and	Progressive	cannot	be	selected	when	
Video	delay	control	is	set	to	On	(p.61).
	 •	Progressive	cannot	be	selected	when	480p,	575p,	720p	or	
1080p	is	selected	(p.45).
		•	Noise reduction	cannot	be	selected	when	1080p	is	selected	
(p.45).

48

A confirmation box
appears and then
select yes.

Video Input
Screen Size Adjustment

1

Press the MENU button to display the On-Screen Menu. Use
the Point pq buttons to select Screen and then press the
Point u or the SELECT button.



Use the Point pq buttons to select the desired item
and then press the SELECT button.
Normal

Provide the image to fit the screen size while maintaining the
aspect ratio of input signal.

Wide
Provide the image at the 16:9 wide screen ratio.

Custom
Adjust the screen scale and position manually with this function.
Press the Point u button at Custom and the Custom is displayed
on the screen, you can use the Point pq buttons to choose the
item you want to adjust.

Custom

Scale H/V ............. Adjust the Horizontal/Vertical screen scale.
H&V ...................... When set to On, the aspect ratio is fixed.
Scale V appears dimmed and becomes
unavailable. Adjust the Scale H, then the
screen scale is automatically modified based
on the aspect ratio.
Position H/V ........ Adjust the Horizontal/Vertical screen position.
Common .............. Save the adjusted scale to all the inputs.
Press the SELECT button at Common to
display a confirmation box. To save the scale,
press the SELECT button at yes, When
Custom is selected, the saved scale is used.
Reset ................... Reset the all adjusted values. Press the
SELECT button at Reset to display a
confirmation box. To reset, press the SELECT
button at “Yes”.

PNote:
	 •	When	no	signal	is	detected,	Normal	is	set	automatically	
and	the	Aspect	dialog	box	disappears.
	 •	The	adjustable	range	for	Scale	H/V	and	Position	H/V	
are	limited	depending	on	the	input	signal.
	 •	Wide	cannot	be	operated	when	720p,	1035i,	1080i or	
1080p is	selected	on	AV	System	Menu	(p.45).

49

Video Input

Keystone

Keystone

This function is used to adjust keystone distortion of the projected
image. Use the Point pq buttons to choose the item you want to
adjust.
t Keystone correction
To correct keystone distortion, press the SELECT button.
Keystone appears on the screen. Use the Point pq buttons to
correct keystone distortion (p.31).
t Store or Reset
To store or reset the keystone correction, press the Point u
button.
Store ........ Keep the keystone correction even when the AC
power cord is unplugged.
Reset ....... Release the keystone correction when the AC
power cord is unplugged.

Ceiling

Ceiling

When this function is set to On, the picture will be top/bottom and
left/right reversed. This function is used to project the image from a
ceiling-mounted projector.

Rear
When this function is set to On, the picture will be left/right
reversed. This function is used to project the image from rear of
the screen.

Reset
This function returns all adjusted values to the factory default
settings. Press the SELECT button at Reset to display a
confirmation box. To reset, press the SELECT button at “Yes.”

50

Rear

Setting
Setting
This projector has a Setting menu that allows you to set up the
other various functions described below.

1

Press the MENU button to display the On-Screen Menu.
Press the Point pq buttons to select Setting and press the
Point u or the SELECT button to access the submenu items.



Use the Point pq buttons to select the desired item and
then press the Point u or the SELECT button to access the
selected item.



Use the Point pq buttons to select the desired item and
then press the SELECT button.

Setting Menu

Language
The language used in the On-Screen Menu is available in English,
German, French, Italian, Spanish, Portuguese, Dutch, Swedish,
Russian, Chinese, Korean and Japanese.

Language

Menu position
This function is used to change the position of the On-Screen Menu.
Select Menu position and press the SELECT button.
The Menu position changes each time you press the SELECT button
as follows.
the top left ‡ the top right ‡ the center ‡ the bottom left ‡ the
bottom right ‡the top left ‡.....

Input button
This function detects the input signal automatically. When a signal is
found, the search will stop. Use the Point pq buttons to select one
of the following options.
Mode 1......Input search will not work.
Mode ......Input search works under the following situation:
– When pressing the INPUT button on the side control.
or the remote control.
Mode ......Input search works under the following situation:
– When turning on the projector by pressing the ON/
STAND-BY button on the side control or pressing the
ON button on the remote control.
– When pressing the INPUT button on the remote
control or on the side control.
- When no signal is detected.

PNote:
	•While	Input button	is	set	to	Mode 3,	and	no	signal	is	
detected,	if	the	No	Show	or	Freeze	function	is	active,	
cancel	it	to	activate	the	Input	search.
	•While	Input	button	is	set	to	Mode 1	or	Mode 2,	the	status	
of	Input	and	Lamp	are	displayed	every	time	the	signal	is	
switched.
	•Only	the	last	selected	input	source	can	be	detected.
	•If	the	INPUT,	INPUT	1,	INPUT	2,	INPUT	3,	ON	/	STANDBY	or	MENU	button	is	pressed	during	Input	search	is	
in	progress,	Input	search	will	stop	and	go	back	to	the	
previous	input	signal.

51

Setting

Display
This function decides whether to display On-Screen Displays.
On ............................... Show all the On-Screen displays. Use this
function when you want to project images
after the lamp becomes bright enough. The
factory default setting is in this option.
Countdown Off .......... Show the input image instead of the
countdown when turning on the projector.
Use this function when you want to project
the image as early as possible even when
the lamp is not bright enough.
Off ............................... Hide the On-Screen Displays except;
ü On-Screen Menu
ü Power off? (p.24)
ü No signal for Power management.
(p.57)
ü Please wait  . . .
ü Arrows for the True function in the
Screen Menu (p.42)
ü P-timer
ü Simple mode

Logo select

Background
Select the background screen for when no input signal is detected.
Press the Point pq buttons to switch between each option.
Blue . . . . Project a blue background.
Black . . . Project a black background.
It is invalid when there is no image.
User . . . . Project an image captured in the Logo setting.

Off

Logo (Logo and Logo PIN code lock settings)
This function allows you to customize the screen logo with Logo
select, capture, Logo PIN code lock and Logo PIN code
change functions.
PNote:
	 		When	On	is	selected	in	the	Logo	PIN	code	lock	function,	Logo select,	
Capture	and	Logo PIN code change	cannot	be	selected.

Logo select
This function decides on the starting-up display from among
following options.
User .......... Show the image you captured.
Default ...... Show the factory-set logo.
Off ............. Show the countdown display only.

5

Off

Setting

Capture
This function enables you to capture an image being projected to
use it for a starting-up display or interval of presentations.

Capture
Logo select

Select Capture and press the SELECT button.
A confirmation box appears and select yes to capture the projected
image.

Off

After capturing the projected image, go to the Logo select function
and set it to User. Then the captured image will be displayed the
next time you turn on the projector.
To cancel the capture function, select yes in the "Quit?" confirmation
box.

PNote:
	 •	Before	capturing	an	image,	select	Standard	in	the	Image	Select	
Menu	to	capture	a	proper	image	(pp.40,	46).
	 •	A	signal	from	a	computer	can	be	captured	up	to	XGA	(1024	x	
768).	A	signal	from	video	equipment	can	be	captured	except	for	
720p,	1035i,	1080i and	1080p.
	 •	When	capturing	the	image	that	has	been	adjusted	by	the	
Keystone	function,	the	adjusted	data	is	automatically	reset	and	
the	projector	captures	an	image	without	keystone	correction.	
	 •	When	 Logo PIN code lock	 is	 set	 to	 On,	 Capture	 cannot	 be	
selected.			
	 •	When	starting	to	capture	a	new	image,	the	previously	stored	
image	is	cleared	even	if	you	cancel	the	capturing.
		•	When	there	is	no	captured	image	or	it	is	interrupted	while	
capturing	an	image,	User	cannot	be	selected,	you	can	only	
switch	between	Default	and	Off.

Logo PIN code lock
This function prevents an unauthorized person from changing the
screen logo.
Off ............. The screen logo can be changed freely from the
Logo Menu (p.52).
On ............. The screen logo cannot be changed without a Logo
PIN code.

Logo PIN code lock
Logo select
Off

If you want to change the Logo PIN code lock setting, press the
SELECT button and the Logo PIN code dialog box appears. Enter
a Logo PIN code by following the steps below. The initial Logo PIN
code is set to "4321" at the factory.

5

Setting

Enter a Logo PIN code
Use the Point pq buttons to enter a number. Press the Point u
button to fix the number and move the red frame pointer to the next
box. The number changes to ⁄. If you fixed an incorrect number,
use the Point u button to move the pointer to the number you want
to correct, and then enter the correct number.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to Set. Press
the SELECT button so that you can start to operate the projector.
If you entered an incorrect Logo PIN code, Logo PIN code and
the number (⁄⁄⁄⁄) will turn red for a moment. Enter the correct
Logo PIN code all over again.

Enter a Logo PIN code

After a correct Logo PIN code
is entered, the following dialog
box appears.

Change the Logo PIN code lock setting
Logo select
Off

Change the Logo PIN code lock setting
Use the Point pq buttons to switch On or Off, and then press the
SELECT button to close the dialog box.

Change the Logo PIN code
Logo select

Logo PIN code change
Logo PIN code can be changed to your desired four-digit number.
Press the Point q button to select Logo PIN code change and
then press the SELECT button. The Current logo PIN code dialog
box appears. Use the Point pq buttons to set the current logo
PIN code. The New logo PIN code dialog box appears. Set a new
Logo PIN code, the confirmation box appears, and choose Yes to
set the new Logo PIN code.
Be sure to note the new Logo PIN code and keep it on hand. If you
lost the number, you could no longer change the Logo PIN code
setting. For details on PIN code setting, refer to "PIN code lock" on
pages 59-60.

CAUTION:
WHEN yOU HAVE CHANGED THE LOGO PIN CODE, WRITE
DOWN THE NEW PIN CODE IN COLUMN OF THE LOGO PIN
CODE NO . MEMO ON PAGE 84, AND KEEP IT SECURELy .
SHOULD THE LOGO PIN CODE BE LOST OR FORGOTTEN, THE
LOGO PIN CODE SETTING CAN NO LONGER BE CHANGED .

54

Next

Setting

Lamp control
Lamp control

Lamp life control

This function allows you to change brightness of the screen.
Auto . . . . . Brightness according to the input signal.
Normal . . . Normal brightness.
Eco 1 . . . . Lower brightness and decrease of fan speed.
Lower brightness reduces the lamp power
consumption and extends the lamp life.
Eco 2 . . . . Lower brightness and increase of fan speed.
Lower brightness reduces the lamp power
consumption and extends the lamp life. It is
recommended to use Eco 2 when using the
projector continuously over a long period of time.
The fan noise becomes louder in Eco 2 than in
Eco 1. Select the suitable mode for the used
environment.

PNote:
	 The	fan	noise	becomes	louder	in	Eco	2	than	in	Eco	1.	
		Select	the	suitable	mode	for	the	used	environment.

Lamp life control
Select the lamp operation when the total lighting time of a lamp
exceeds the recommended total hours of use.
Mode 1 ............ A lamp can be turned on even after
exceeding the recommended total hours of
use.
Mode  ............ A lamp can be turned on even after
exceeding the recommended total hours of
use. But the projector turns off automatically
after 3 minutes.

PNote:
• 	Lamp	mode	cannot	be	changed	for	a	while	after	turning	on	the	
projector.	Lamp	needs	some	time	to	stabilize	after	the	power	
is	turned	on.	Stored	lamp	mode	will	be	active	after	the	lamp	is	
stabilized.
• 	If	Mode 2 has	been	selected	and	the	projection	lamp	
				exceeds	the	recommended	total	hours	of	use,	the	
				replacement	icon	will	be	displayed	at	the	time	of	power-on.	
			Then	the	projector	will	turn	off	after	3	minutes.
Lamp replacement icon

The Lamp replacement icon will not appear when the Display
function is set to Off (p.52), during "Freeze" (p.30) or "No show"
(p.29).

55

Setting

Fan control
Choose the running speed of cooling fans from the following options.
Normal ...... Operate in this mode under normal conditions.
Max ........... Use this mode when you want to increase the cooling
effect when operating the projector in high ambient
temperature environment. Fan noise is louder than
Normal.

Simple mode
This function decides whether to activate the simple mode.
Off . . . . Simple mode function is off.
On . . . . Only the simple mode buttons are active.

Simple mode buttons

PNote:
		Warning	icon	and	Simple mode : On	message	appear	on	the	screen	
		when	press	the	button	which	is	not	the	simple	mode	button.

Remote control
The eight different remote control codes (Code 1-Code 8) are
assigned to the projector; the factory-set, initial code (Code 1) and
the other seven codes (Code  to Code 8).
The same code should be set on both the projector and the remote
control. For example, operating the projector in Code 7, the remote
control code also must be switched to Code 7.
To change the code for the projector
Select a remote control code in this Setting Menu.
To change the code for the remote control:
Press and hold the MENU button and a number button (1-8) on
the remote control for more than five seconds to switch between
the codes. See “Remote Control Code” on page 16.

PNote:
•	When	different	codes	are	set	on	the	projector	and	on	the	remote	
		control,	any	operation	cannot	be	made.	In	that	case,	switch	the	code	on	
		the	remote	control	to	fit	the	code	on	the	projector.
•	If	the	batteries	are	removed	from	the	remote	control	for	a	long	period	of	
		time,	the	remote	control	code	will	be	reset.

56

Only these buttons are active
when the simple mode is
set to On. [ON, STAND-BY,
INPUT, AUTO PC, INFO.,
MENU, SCREEN, pqt u,
SELECT, NO SHOW, VOL.+,
VOL.-, MUTE, RESET/ON/
ALL-OFF switch] Number
buttons (p.14) also become
active only when setting the
remote control codes numbers
or entering the PIN code
numbers (pp. 54, 60).

Setting

RC sensor
Select a location of the infrared remote receiver of the remote control.
See “Remote Control Receivers and Operating Range” on page 15 for
details.
All ............ Activate all of the receivers.
Front & Top . . . . . .Activate both the front and top receivers.
Top & Back . . . . . . Activate both the top and back receivers.
Front & Back . . . .Activate both the front and back receivers.
Front ....... Activate only the front receiver.
Top .......... Activate only the top receiver
Back ........ Activate only the back receiver.

Power management

Power management
For reducing power consumption as well as maintaining the lamp life,
the Power management function turns off the projection lamp when
the projector is not operated for a certain period.
Select one of the following options:

Timer left before Lamp is off.

Ready .................. When the lamp has been fully cooled down, the
POWER indicator changes to green blinking. In
this condition, the projection lamp will be turned
on if the input signal is reconnected or any
button on the side control or remote control is
pressed.
Shut down ........... When the lamp has been fully cooled down, the
power will be turned off.
Off ........................ Power management function is off.
Timer.................... If the input signal is interrupted and no button
is pressed for more than 30 seconds, the timer
display with No signal appears. It starts the
countdown until the lamp is turned off. Use the
Point pq buttons to set the Timer(1~30Min).

PNote:
	 Factory	default	is	Ready: 5 Min.

Min

Standby mode
This function is available when operating the projector via network.
Network .......... Supply the power to the network function
even after turning off the projector. You can turn
on/off the projector via network, modify network
environment, and receive an e-mail about projector
status while the projector is powered off.
Eco.................... Select Eco when you do not use the projector
via network. The projector’s network function will
stop when turning off the projector.

Min

Refer to the owner’s manual of “Network Set-up and Operation”.

PNote:
•	Factory	default	is	Network.
•	When	selecting	Network,	the	cooling	fans	may	be	running	depending
		on	the	temperature	inside	the	projector	even	if	the	projector	is	turned
		off.

57

Setting

On start
When this function is set to On, the projector will be automatically
turned on just by connecting the AC power cord to the wall outlet.

PNote:
				 Be	sure	to	turn	off	the	projector	properly	(see	“Turning	Off	
the	Projector”	on	page	24).	If	the	projector	is	turned	off	in	
the	incorrect	sequence,	the	On	start	function	does	not	work	
properly.

Pointer
You can emphasize a part of the projected image with this function.
Use the Point pq buttons to select a pattern of the Pointer (Arrow,
Finger, or Dot) (p.32)

P-TIMER

P-timer display

P-timer
This function allows you to change the presentation of the P-timer
and execute it.
Select one of the following options:
Count up ............. The P-timer display 000:00 appears on the
screen and the count starts (000:00–180:00)
Count down ........ The time set in the Timer setting appears on the
screen and the countdown starts.
Timer.................... Use the Point pq buttons to set the Timer
(1–180 Min). Only set to Count down, Timer is
active. Factory default velue is 10 Min.
Start ..................... It executes the count up or count down
function. Press the SELECT button at Start,
Start changes to Stop in the Screen Menu. At
that time, press the SELECT button at Stop
to stop Count up or Count down, and Stop
changes to Restart in the Screen Menu. Press
the SELECT button at Restart to resume
Count up or Count down.
Reset ................... Reset the P-timer values.
Press the SELECT button at Reset to return to
the following value;
Count up ... "000:00"
Count down ... Timer that you set
Exit ....................... To exit the P-timer operation.

P-Timer
Count up
Count down

Timer
Start

58

min

Reset
Exit

P-Timer
Count up
Count down

Timer
Start

Stop or Cancel the P-timer via Remote Control
To stop the P-timer, press the P-TIMER button.
To cancel the P-timer, press and hold the P-TIMER button for a few
seconds.

30 Min

Reset
Exit

min
30 Min

Setting

Security (Key lock and PIN code lock)

Key lock

This function allows you to use the Key lock and PIN code lock
function to set the security for the projector operation.

Key lock
This function locks the side control and remote control buttons
to prevent operation by unauthorized persons.
. . . . . . Unlocked.
. . . . . . Lock the operation of the side control.
To unlock, use the remote control.
. . . . . . Lock the operation of the remote
control. To unlock, use the side control.

Off

If the side control accidentally becomes locked and you do
not have the remote control nearby or there is something
wrong with your remote control, contact the dealer where you
purchased the projector or the service center.

Off

PIN code lock
This function prevents the projector from being operated
by unauthorized persons and provides the following setting
options for security.
Off
. . . . . Unlocked.
On1 . . . . . Enter the PIN code every time turning on
the projector.
On . . . . . Enter the PIN code to operate the projector
once the power cord is disconnected; as long as
the AC power cord is connected, the projector
can be operated without a PIN code.

PIN code lock

Off

Whenever you change the PIN code lock setting or the PIN
code (the four-digit number), you are required to enter the PIN
code. The "1234" is set as the initial PIN code at the factory.
If you want to change the PIN code lock setting, Press the
SELECT button and the PIN code dialog box appears.

59

Setting

Enter a PIN code
Use the Point pq buttons to enter a number. Press the Point u
button to fix the number and move the red frame pointer to the
next box. The number changes to ⁄. If you fixed an incorrect
number, use the Point t button to move the pointer to the number
you want to correct, and then enter the correct number.

Enter a PIN code

Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to Set.
Press the SELECT button so that you can start to operate the
projector.
If you entered an incorrect PIN code, PIN code and the number
(⁄⁄⁄⁄) will turn red for a moment. Enter the correct PIN code
all over again.

Change the PIN code lock setting
Use the Point pq buttons to select Off, On1 or On. Press the
SELECT button to close the dialog box.

Change the PIN code

Off

PIN code change
The PIN code can be changed to your desired four-digit number.
Press the Point q button to select PIN code change and press
the SELECT button. The Current PIN code dialog box appears.
Use the Point pq buttons to set the current PIN code. The
New PIN code dialog box appears. Set a new PIN code, the
confirmation box appears, and choose Yes to set the new PIN
code.

CAUTION:
WHEN yOU HAVE CHANGED THE PIN CODE, WRITE DOWN
THE NEW PIN CODE IN COLUMN OF THE PIN CODE NO .
MEMO ON PAGE 84, AND KEEP IT SECURELy . IF yOU
FORGET yOUR PIN CODE, THE PROjECTOR CAN NO
LONGER BE STARTED .

60

Setting

Closed caption
Closed Caption is a printed version of the program sound
or other information displayed on the screen. If the input
signal contains closed captions, you can turn on the
feature and switch the channels. Press the Point ed
buttons to select Off, CC1, CC, CC or CC4.
If the closed caption is not clear, you can change the text
from Color to White.
✔ Note:

The Closed Caption is available only under the situation
below.
•When the input signal is NTSC of composite and
S-video, and the system is set according to the signal
or set on Auto.
•The system must be set on NTSC or Auto in Video
System Selection. (P.39)
•The icon of Closed Caption is displayed in gray while
it is not available.
•The Closed caption is unavailable when On-Screen
menu and P-Timer are displayed.

Press the Point ed buttons to select Off, CC1, CC,
CC or CC4, and then Press SELECT button.

Video delay control
When you want to make a digital processing of a projected
image faster, set this function.
Use the Point pq buttons to select On or Off.

PNote:
	 Noise reduction and Progressive can not be selected when Video
delay control is set to On.

61

Setting
Filter counter
This function is used to set a frequency for the filter cartridge
replacement.

Filter counter

Use the Point pq buttons to select Filter counter and then press
the Point u or the SELECT button to access the submenu items.
Filter counter......

Show the total accumulated time of the filter
cartridge.
Timer ................
To set a timer, when the projector reaches
the time, the Filter warning icon (Fig. 1)
appears on the screen and the total
accumulated time turns red, indicating that
the filter cartridge replacement is necessary.
Filter counter reset...When replacing the Filter cartridge, reset the
Filter counter (p.65).
Fig .1 Filter warning icon
Filter warning icon appears on the screen at a
set time.

Press the SELECT button to select Timer and then use
the Point pq buttons to set the timer. Select from (Off/
600H/900H/100H/1500H/1800H/000H) depending on
the use environment.

PNote:
	 •	Fig.1	appears	at	turning	on	and	selecting	input	
source.
	 •	Fig.1	will	not	appear	when	the	Display	function	is	
set	to	Off	(p.52),	during	“Freeze”	(p.30)	or	No	show	
(p	29).

Test pattern
Various test pattern are available for use when setting up the
projector.

Factory default
This function returns all setting values except for User logo,
PIN code lock, Logo PIN code lock, Lamp counter, and Filter
counter to the factory default settings.

6

Maintenance and Care
Filter Instructions
Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes clogged with
dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the life of
the projector.

If the projector reaches a time set in the timer setting (p.62), a Filter
warning icon (Fig.1) appears on the screen and the WARNING
FILTER indicator on the top panel lights up (p.78). When you see
this icon, replace the filter cartridge as soon as possible (pp.30,
56). All the indicators except Lamp indicator blink fast when the
projector detects an abnormal condition, or the filter cartridge is not
installed properly (p.78).

Fig .1 Filter warning icon
Filter warning icon appears on the screen at a
set time.

PNote:
	
	
	
	

•	Fig.1	will	not	appear	when	the	Display	function	is	set	to	Off
(p.52),	or	during	“Freeze”	(p.30)	or	“No	show”	(p	29).
•	The	filter	cartridge	is	disposable.	Do	not	clean	and	reuse	the	
filter	cartridge.
•	Do	not	expose	the	filter	cartridge	to	water	or	liquid,	or	it	may	
cause	a	breakdown.
•	Do	not	use	the	filter	cartridge	with	other	projector.	
•	Make	sure	that	the	projection	lamp	is	turn	off	when	you	are	
replacing	the	filter	cartridge.	If	you	replace	the	filter	cartridge		
when	the	projection	lamp	is	turn	on,	the	projector	will	be	shut	
down	automatically	for	safety	purpose.

6

Maintenance and Care
Replacing the Filter Cartridge

1

Turn off the projector, and unplug the AC power cord from the
AC outlet.



First, clean up the dust on the projector and around the air
vents.



Press q downwards on the filter cover to release the latch
and open the filter cover.

4

Pull out the filter cartridge. When taking out the filter cartridge,
put your finger on the filter cartridge’s tab and then pull.

5

Put the new one back into the position and close the filter
cover. Make sure that the filter cartridge is properly and fully
inserted.

6

Connect the AC power cord to the projector and turn on the
projector.

7

Reset the filter counter (p.65).

Filter cover

Latch

CAUTION
Make sure the filter cartridge is inserted in the projector. If
the filter cartridge is not inserted, the projector cannot be
turned on.
Do not put anything into the air vents. Doing so may result
in malfunction of the projector.

RECOMMENDATION
We recommend avoiding dusty/smoky environments when
operating the projector . Usage in these environments may
cause a poor image quality .
When using the projector under dusty or smoky conditions,
dust may accumulate on a lens, liquid crystal panels, or optical
elements inside the projector. Such condition may degrade the
quality of the projected image.
When the symptoms above are noticed, contact your authorized
dealer or service center for proper cleaning.

ORDER REPLACEMENT FILTER CARTRIDGE
Replacement filter cartridge can be ordered through your dealer.
When ordering, give the following information to the dealer.

ü Model No . of your projector
PLC-XM80, PLC-XM80L
ü Replacement Filter Cartridge Type No .
POA-FIL-081 (Service Parts No. 610 349 8317)

64

Tab

Filter cartridge

Maintenance and Care
Resetting the Filter Counter
Be sure to reset the Filter counter after cleaning or replacing the
filter.

1

Press the MENU button to display the On-Screen Menu. Use
the Point pq buttons to select Setting and then press the
Point u or the SELECT button.



Use the Point pq buttons to select Filter counter and then
press the SELECT button. Use the Point pq buttons to
select Filter counter Reset and then press the SELECT
button. Filter counter Reset? appears. Select yes to
continue.



Another confirmation dialog box appears, select yes to reset
the Filter counter.

Filter counter

Filter counter Reset?
appears.
Select yes, then another
confirmation box appears.
Select yes again to reset
the Filter counter.

65

Maintenance and Care
Lamp Replacement
When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and
LAMP REPLACE indicator lights orange. Replace the lamp with a new one promptly. The timing when the LAMP REPLACE
indicator should light is depending on the lamp mode.
Lamp cover

Top Panel

Lamp replacement icon
Screw

LAMP REPLACE indicator

PNote:
	 		The	Lamp	replacement	icon	will	not	appear	when	the	Display	function	is	
set	to	Off (p.52),	during	"Freeze"	(p.30)	or	"No	show"	(p.29).
Screws

Follow these steps to replace the lamp.

1

Turn off the projector and unplug the AC power cord. Let the
projector cool for at least 45 minutes.



Loosen the screw and open the lamp cover. Loosen 3 screws
of the lamp and pull out the lamp by using the built in handle.



Replace the lamp with a new one. Make sure that the lamp is
properly and fully inserted.

4
5

Close the lamp cover and secure the screw.

Handle

Connect the AC power cord to the projector and turn on the
projector.

PNote:

Lamp

	 Be	sure	to	insert	the	lamp	in	the	correct	direction.

CAUTION
When replacing the lamp because it has stopped illuminating,
there is a possibility that the lamp may be broken.
If replacing the lamp of a projector which has been installed
on the ceiling, you should always assume that the lamp is
broken, and you should stand to the side of the lamp cover,
not underneath it. Remove the lamp cover gently. Small
pieces of glass may fall out when the lamp cover is opened.
If pieces of glass get into your eyes or mouth, seek medical
advice immediately.

CAUTION
Allow a projector to cool for at least 45 minutes
before you open the lamp cover. The inside of the
projector can become very hot.

66

New Lamp

CAUTION
For continued safety, replace with a lamp of the
same type. Do not drop the lamp or touch the glass
bulb! The glass can shatter and may cause injury.

Maintenance and Care

LAMP HANDLING PRECAUTIONS
This projector uses a high-pressure lamp which must be handled carefully and properly.
Improper handling may result in accidents, injury, or create a fire hazard.

ü

ü

ü

Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no
guarantee of the same lifetime for each lamp. Some lamps may fail or terminate their lifetime in a
shorter period of time than other similar lamps.
If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights
up, replace the lamp with a new one IMMEDIATELY after the projector has cooled down. (Follow
carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp
with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion.
Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its
lifetime draws to an end. Risk of explosion may differ according to the environment or conditions in
which the projector and lamp are being used.

IF A LAMP EXPLODES, THE FOLLOWING SAFETy PRECAUTIONS SHOULD BE TAKEN .
If a lamp explodes, disconnect the projector’s AC plug from the AC outlet immediately. Contact an
authorized service center for a checkup of the unit and replacement of the lamp. Additionally, check
carefully to ensure that there are no broken shards or pieces of glass around the projector or coming out
from the cooling air circulation holes. Any broken shards found should be cleaned up carefully. No one
should check the inside of the projector except those who are authorized trained technicians and who
are familiar with projector service. Inappropriate attempts to service the unit by anyone, especially those
who are not appropriately trained to do so, may result in an accident or injury caused by pieces of broken
glass.

ORDER REPLACEMENT LAMP
Replacement lamp can be ordered through your dealer. When ordering, give the following information to the
dealer.

ü Model No . of your projector
ü Replacement Lamp Type No .

:
:

PLC-XM80, PLC-XM80L
POA-LMP17
(Service Parts No. 610 347 5158)

67

Maintenance and Care

Cleaning the Projection Lens
Unplug the AC power cord before cleaning.
Gently wipe the projection lens with a cleaning cloth that
contains a small amount of non-abrasive camera lens cleaner,
or use a lens cleaning paper or commercially available air
blower to clean the lens.
Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvents, or other harsh chemicals might scratch the
surface of the lens.

Cleaning the Projector Cabinet
Unplug the AC power cord before cleaning.
Gently wipe the projector body with a soft dry cleaning cloth.
When the cabinet is heavily soiled, use a small amount of
mild detergent and finish with a soft dry cleaning cloth. Avoid
using an excessive amount of cleaner. Abrasive cleaners,
solvents, or other harsh chemicals might scratch the surface
of the cabinet.
When the projector is not in use, put the projector in an
appropriate carrying case to protect from dust and scratches.

CAUTION
Do not use any flammable solvents or air sprays on the projector and in its vicinity. The explosion or fire hazard
may occur even after the AC power cord is unplugged because the temperature inside the projector is extremely
high due to the lamps. In addition, there is a risk that the internal parts may be damaged not only by the
flammable air spray but also by the cold air.

68

Maintenance and Care
Warning Indicators
The WARNING indicators show the state of the function which protects the projector. Check the state of the WARNING
indicators and the POWER indicator to take proper maintenance.

The projector is shut down and the WARNING
TEMP . indicator is blinking red .

Top Panel

When the temperature inside the projector reaches a
certain level, the projector will be automatically shut down to
protect the inside of the projector. The POWER indicator is blinking
while the projector is being cooled down. When the projector has
cooled down enough (to its normal operating temperature), it can
be turned on again by pressing the ON/STAND-BY button.

PNote:
	 The	WARNING	TEMP.	indicator	continues	to	blink	even	after	the	
temperature	inside	the	projector	returns	to	normal.	When	the	projector	
is	turned	on	again,	the	WARNING	TEMP.	indicator	stops	blinking.	

WARNING TEMP .
blinking red

Then check the matters below:
– Did you provide appropriate space for the projector to be
ventilated? Check the installing condition to see if the air vents of
the projector are not blocked.
– Has the projector been installed near an Air-Conditioning/
Heating Duct or Vent? Move the installation of the projector away
from the duct or vent.
– Is the filter clean? Replace the filter with a new one.

The projector is shut down and the LAMP indicator is
lighting and other indicators are blinking .

Top Panel

When the projector detects an abnormal condition, it will
be automatically shut down to protect the inside of the
projector and the LAMP indicator lights on and other indicators
blink. In this case, unplug the AC power cord and plug it, and then
turn on the projector once again to verify operation. If the
projector cannot be turned on and these indicators are still lighting
and blinking, unplug the AC power cord and contact
the service center.
LAMP indicator lights on and
other indicators blink .

CAUTION
DO NOT LEAVE THE PROJECTOR WITH THE
AC POWER CORD CONNECTED UNDER AN
ABNORMAL CONDITION. IT MAY RESULT IN
FIRE OR ELECTRIC SHOCK.

69

Appendix
Troubleshooting
Before calling your dealer or service center for assistance, check the items below once again.
1.
2.
3.
4.
5.

Make sure you have properly connected the projector to peripheral equipment as described on pages 19-21.
Check the cable connection. Make sure that all computers, video equipment, and power cords are properly connected.
Make sure that all power is switched on.
If the projector still does not produce an image, restart your computer.
If an image still does not appear, disconnect the projector from your computer and check your computer monitor’s display.
A problem may be noticed with your graphics controller rather than with the projector. (When you reconnect the projector,
be sure to turn the computer and monitor off before you turn on the projector. Turn on equipment in the order of the
projector and computer.)
6. If a problem still persists, check the following solutions.

Problem:

Solutions

No power .

– Plug the power cord of the projector into the AC outlet.
– Wait until the POWER indicator stops blinking to turn on the projector again. (See
page 23)
– Check the WARNING TEMP. indicator. If the WARNING TEMP. indicator is blinking,
the projector cannot be turned on. (See page 69.)
– Unlock the Key lock function for the projector. (See page 59)
– See if the filter cartridge is inserted. (See page 64)
– Check the projection lamp. (See page 66)

PIN code dialog box
appears at start-up .

– PIN code lock is being set. Enter a PIN code; the “1234” or numbers you have set
(See pages 23, 59-60)

The initial display is not
shown .

– Make sure Off or Countdown Off is not chosen at Display function.
(See “Setting” section on page 52)

The initial display is not
– Make sure User or Off is not chosen at Logo select function.
(See “Setting” section on page 52)
same with the default one .
When the projector is on
and you press the input
button, an icon other
than the Lamp mode icon
appears .

– That is the Filter warning icon. (See pages 62-63)

An icon other than Input
mode or Lamp mode icon
appears .

– That is the Lamp replacement icon or the Filter warning icon. (See pages 55, 62-63,
66)

No image .

– Check the connection between your computer or video equipment and the projector.
– See if the input signal is correctly output from your computer. Some laptop computers
may need to be changed the setting for monitor output when connected to the
projector. See your computer’s instruction manual for the setting.
– It takes about 30 seconds to display an image after turning on the projector.
– See if the selected system is corresponding with your computer or video equipment.
– Select correct input source once again through menu operation. (See pages 33-35)
– Make sure the temperature is not out of Operating Temperature (41˚F–104˚F [5˚C–
40˚C]).
- When No show is operating, the image cannot be displayed. Press the NO SHOW
button or any other button on the remote control.

– End of lamp life is approaching. Replace the lamp with a new one promptly. (See
page 66

appears on the screen

70

Appendix

The image is out of focus .

– Adjust the focus of the projector.
– Check Projection Lens to see if it needs cleaning.
PNote: Moving	the	projector	from	a	cool	temperature	location	to	a	warm	temperature	
location	may	result	in	moisture	condensation	on	Projection	Lens.	In	such	
cases,	leave	the	projector	OFF	and	wait	until	condensation	evaporates.
– Projecting from excessive slant angle to the screen may cause keystone distortion
and partial imperfect focus.
– Make sure the projection screen is at least 4.3’ (1.3 m) away from the projector.

The image is not bright
enough .

– Check if Contrast or Brightness is adjusted properly. (See pages 41, 47)
– Check if Image level is selected properly. (See pages 40, 46)
– Check the Lamp control function. ( See “Setting” section on page 55)
– Check the LAMP REPLACE indicator. If it lights, the end of lamp life is approaching.
Replace the lamp with a new one promptly. (See page 66)

The color is strange .

– Check the Input signal, color system, video system, or computer system mode.
– Adjust the Image Level properly. (See pages 40, 46)

The image is Left/Right
reversed .
The image is Top/Bottom
reversed .
The image is distorted or
runs off .
Auto PC adjustment
function does not work.

– Check the Ceiling / Rear function. (See pages 44, 50)
– Check the Ceiling function. (See pages 44, 50)
– Check PC adjust Menu or Screen Menu and adjust them.
– Check the Input signal. Auto PC Adjustment function cannot work when 480p, 575p,
70p, 480i, 575i, 105i, 1080i or 1080p is selected or when the digital signal is input
into DVI terminal. (See page 37)

Some displays are not
– Check the Display function. (see page 52)
seen during the operation .
The setting does not
remain after turning off
power .
Power management
function does not work .
Image disappears
automatically .
Capture function does not
work .
Some menus cannot be
selected .

No sound

– Make sure you selected Store after adjusting settings. Some settings cannot be
stored if not registered with Store function.
– Power management function cannot work while Freeze or No show function is
running.
– Check the power management function in the Setting. The power management is set
to On at the factory.
– Check the connection to see if there is signal.
– Each of the Video Input and Computer Input has a limit on selectable menus.
– Check the audio cable connection from audio input source.
– Adjust the audio source.
– Press the Volume + button. ( See page 28)
– Press the Mute button. (See page 28)
– Is the image projected? You will hear the sound only when the image is projected.
– Check the Build-in SP function. (See page 28)

71

Appendix

The power is turned off
automatically .

– Power management function runs by initial setting. Check “Setting” section on page
57.
– Do not cover the ventilation slots on the projector. (See pages 4, 6)
– Projector may be used in high ambient temperature environment. Make sure the
temperature is not out of Operating Temperature (41˚F–104˚F [5˚C–40˚C]). (See page
69)

you cannot operate with
the side control .

– If the side control is locked at "Key lock" under "Security" of Setting menu, the side
control is not available. Please check “Setting” section on page 59.

The Remote Control does
not work .

– Check the batteries.
– Check if the RC sensor is set properly. (See page 57)
– Make sure no obstruction is between the projector and remote control.
– Make sure you are not too far from the projector when using the remote control.
Maximum operating range is 16.4’ (5m). (See page 15)
– Make sure that the remote control code conforms to the projector’s code. (See
“SETTING” section on page 56.)
– Unlock the Key lock function for the remote control. (See page 59)
– Wireless remote control does not work when the remote control cable is connected to
the projector. (See page 15)
– Check if the ALL-OFF switch on the remote control is set to “ON.”
– Make sure that the simple mode in the remote control function is set to Off (See page
56).

Wireless mouse function
does not work .

– Check the cable connection between the projector and your computer. (See pages 19,
32)
– Check the mouse setting on your computer.
– Turn on the projector before you turn on the computer.

Indicators blink or light .

– Check the status of the projector with referring to “Indicators and projector condition” on
pages 76-78.

– Your operation is invalid. Operate correctly.

appears on the screen
Unable to unlock the Logo
PIN code lock, Security
– Contact the dealer where you purchased the projector or the service center.
key lock or Security PIN
code lock .
Forget the Logo PIN code
or Security PIN code .

– Contact the dealer where you purchased the projector or the service center.

WARNING:
High voltages are used to operate this projector . Do not attempt to open the cabinet .
If problems still persist after following all operating instructions, contact the dealer where you purchased the projector or the
service center. Specify the model number and explain about the problem. We will advise you how to obtain service.

7

Appendix
Menu Tree
Computer Input/Video Input
Sound

Input
Input

Input 1

RGB (PC analog)

Sound

RGB (Scart)

Built-in SP

Volume

0–63
On/Off

Mute

On/Off

RGB (PC digital)
RGB (AV HDCP)
Input 2

Video

Information
Information

Input
H-sync freq.
V-sync freq.
Screen
Language
Lamp status
Lamp counter
Filter counter
Power management
Key lock

Y, Pb/Cb,Pr/Cr
RGB
Input 3

Video
Y, Pb/Cb,Pr/Cr
S-video

PIN code lock
Simple mode
Remote control
SERIAL NO.

Computer Input
System (1)

Mode 1
Mode 2
Mode 3

Image select
Image select

Standard

Mode 4

Real

Mode 5

Image 1

Mode 6
Mode 7

Image 10

Mode 8
Mode 9
Mode 10
⁄ System displayed in the System Menu varies depending on the input signal.

Image adjust
Image adjust

PC adjust
Contrast
Brightness
Color temp.

Red
Green
Blue
Offset
Sharpness
Gamma
Reset
Store

0–63
0–63
XLow
Low
Mid
High
Adj
0–63
0–63
0–63
Red/Green/Blue
0–31
0–15
Yes/No
Image 1

PC adjust

Auto PC adj.
Fine sync.

0–31

Total dots
Position H
Position V
Current mode
Clamp
Display area - H
Display area - V
Reset

Yes/No

Mode free
Store

Mode 1

Mode 10
Quit

Image 10

PNote:
	The	Menu	display	varies	depending	on	the	input	signal.

7

Appendix

Screen
Screen

Normal
True
Wide
Full

Scale
H&V
Position
Common
Reset

Custom

H/V
On/Off
H/V

Digital zoom +
Digital zoom -

Keystone

Store
Reset
On/Off
On/Off

Ceiling
Rear
Reset

Video Input
System (2)

System (3)

Auto

Auto

PAL

1080p

SECAM

1080i

NTSC

1035i

NTSC 4.43

720p

PAL-M

575p

PAL-N

480p
575i
480i

Image adjust
Image adjust

Image select
Contrast
Brightness
Color
Tint
Color temp.

Red
Green
Blue
Offset
Sharpness
Gamma
Noise reduction
Progressive
Reset
Store

0–63
0–63
0–63
0–63

Mid
High
Adj
0–63
0–63
0–63
Red/Green/Blue
0–31
0–15
Off/On
Off/On/Film
Yes/No
Image 1

PNote:
	 The	Menu	display	varies	depending	on	the	input	signal.

Standard
Cinema
Image 1

XLow
Low

Image 10

74

Image select

Image 10

Screen
Screen

Normal
Wide

Custom

Scale
H&V
Position
Common
Reset

Keystone

Store
Reset
On/Off
On/Off

Ceiling
Rear
Reset

H/V
On/Off
H/V

Appendix
Computer Input/Video Input
Setting
Setting

12 languages provided

Language
Menu position
Input button

Mode 1/Mode 2/Mode 3

Display

On/Countdown Off/Off

Background

Blue/User/Black

Logo

Logo select
User
Default
Off
Capture
Yes/No
Logo PIN code lock

Off/On

Logo PIN code change
Lamp control

Lamp control

Auto/Normal/Eco 1/Eco 2

Lamp life control
Fan control

Normal/Max

Simple mode

On/Off

Mode 1/Mode 2

Remote Control

Code 1~Code 8

RC sensor

All/Front&Top/Top&Back/Front&Back/Front/Top/Back

Power management

Off
Ready
Shut down
1–30 Min

Standby mode

Eco/Network

On start

On/Off

Pointer
P-timer

Count up

Finger/Arrow/Dot
Count down
Timer
Start
Reset
Exit
Key lock

Security

Off
Projector
Remote control
PIN code lock
Off/On1/On2
PIN code change
Closed caption

Closed caption
Color

Video delay control
Filter counter

CC1/CC2/CC3/CC4

White/Color

Off/On

Filter counter

H

Off/600H/900H/1200H/1500H/1800H/2000H
Timer
Filter counter reset
Yes/No
Test pattern
Factory default

8 test patterns provided
Yes/No

75

Appendix
Indicators and Projector Condition
Check the indicators for the projector condition.

The projector is operating normally .

Indicators
POWER
green

LAMP
red

Projector Condition

WARNING WARNING P-MANAGEMENT
LAMP
TEMP.
FILTER STAND-BY REPLACE
blue
red
orange
orange

The projector is off. (The AC power cord is unplugged.)

❖

⁄

⁄

The projector is in stand-by mode. Press the ON/
STAND-BY button to turn on the projector.

❖

⁄

⁄

The projector is operating normally.

❖

⁄

⁄

The projector is preparing for stand-by or the projection
lamp is being cooled down. The projector cannot be
turned on until cooling is completed and the POWER
indicator lights green.

❖

⁄

⁄

The projection lamp is being cooled down in the Power
management mode.

⁄

The projector is in the Power management mode.
Press the ON/STAND-BY button to turn on the
projector.

⁄

❖

• • • on

❊ • • • blinking at the normal rate (blue
and dim red) (approx. 1 second
ON, 1 second OFF)

• • • dim
❖ • • • dim (red)

76

• • •blinking fast

• • • blinking at the normal rate
(approx. 1 second ON,
1 second OFF)

❖ • • • on (red)
❊ • • • on (blue)

❊

• • • off

⁄

• • • Differ according to conditions.

(approx. 0.5 seconds ON, 0.5
seconds OFF)
❊

• • •blinking fast (blue and dim red)
(approx. 0.5 seconds ON, 0.5
seconds OFF)
• • • blinking slow
(approx. 2 seconds ON, 2
seconds OFF)

Appendix
The projector is detecting abnormal condition .

Indicators
POWER
green

LAMP
red

WARNING WARNING P-MANAGEMENT LAMP
TEMP.
FILTER STAND-BY REPLACE
red
orange
orange
blue

⁄

❖

⁄

❖

⁄

Projector Condition

⁄

The temperature inside the projector is elevated close to the
abnormally high level.

⁄

The temperature inside the projector is abnormally high. The
projector cannot be turned on. When the projector is cooled
down enough and the temperature returns to normal, the
POWER indicator lights green and the projector can be turned
on. (The WARNING TEMP. indicator keeps blinking.) Check and
replace the filter.

⁄

The projector has been cooled down enough and the
temperature returns to normal. When turning on the projector, the
WARNING TEMP. indicator stops blinking. Check and replace
the filter.

❖

⁄

❖

⁄

The lamp cannot light up. (The projector is preparing for standby or the projection lamp is being cooled down. The projector
cannot be turned on until cooling is completed.)

❖

⁄

The lamp cannot light up. (The lamp has been cooled down
enough and the projector is in stand-by mode and ready to be
turned on with the ON/STAND-BY button.)

⁄

The lamp has been used overtime. Replace the lamp
immediately.

⁄

⁄

WARNING FILTER
When the filter detects clogging, reaches a time set in the timer setting, the WARNING FILTER indicator lights orange.
When this indicator lights orange, replace the filter cartridge with a new one promptly. Reset the Filter counter after
replacing the filter cartridge (p.65).
LAMP REPLACE
When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights orange. When this indicator lights
orange, replace the projection lamp with a new one promptly. (p.66)

77

Appendix
The projector is detecting abnormal condition .

Indicators
POWER
green

LAMP
red

WARNING WARNING P-MANAGEMENT
LAMP
TEMP.
FILTER STAND-BY REPLACE
blue
red
orange
orange

⁄

Fig .1 Filter warning icon

⁄

Projector Condition
If the Filter counter reached a time set in the timer setting, a Filter
warning icon (Fig.1) appears on the screen and the WARNING
FILTER indicator on the top panel lights up. Replace the filter
cartridge as soon as possible.
PNote:
Fig.2	will	not	appear	when	the	Display	function	is	set	to	Off	(p.52),	during	
“Freeze”	(p.30),	or	No	show	(p.29).

The filter cartridge is not installed in the projector. Check the filter
compartment to see if the filter cartridge is installed in the projector.
When the filter cartridge is installed and the indicators continue to
light and blink, read the column below.
❖

78

The projector detects an abnormal condition and cannot be turned
on. Unplug the AC power cord and plug it again to turn on the
projector. If the projector is turned off again, unplug the AC power
cord and contact the dealer or the service center. Do not leave the
projector on. It may cause an electric shock or a fire hazard.

Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with the V- and H-Frequency mentioned below and less than
140 MHz of Dot Clock.
ON-SCREEN
DISPLAy
VGA 1
VGA 2
VGA 3
VGA 4
VGA 5
VGA 6
VGA 7
MAC LC13
MAC 13
480p
575p
575i
480i

RESOLUTION
640x480
720x400
640x400
640x480
640x480
640x480
640x480
640x480
640x480
640x480
768x575
768x576
(Interlace)
640x480
(Interlace)

SVGA 1
SVGA 2
SVGA 3
SVGA 4
SVGA 5
SVGA 6
SVGA 7
SVGA 8
SVGA 9
SVGA 10
SVGA 11
MAC 16
XGA 1
XGA 2
XGA 3
XGA 4
XGA 5
XGA 6
XGA 7
XGA 8
XGA 9

800x600
800x600
800x600
800x600
800x600
800x600
800x600
800x600
800x600
800x600
800x600
832x624
1024x768
1024x768
1024x768
1024x768
1024x768
1024x768
1024x768
1024x768

XGA 10
XGA 11
XGA 12

1024x768
1024x768

XGA 13
XGA 14
XGA 15
MAC 19
SXGA 1
SXGA 2
SXGA 3
SXGA 4
SXGA 5
SXGA 6
SXGA 7
SXGA 8
SXGA 9
SXGA 10
SXGA 11
SXGA 12

1024x768
1024x768
1024x768
1024x768
1152x864
1280x1024
1280x1024
1280x1024
1280x1024
1280x1024
1280x1024
1280x1024
1280x1024
1280x960
1152x900
1152x900

1024x768
(Interlace)

1024x768
(Interlace)

H-Freq .
(kHz)
31.470
31.470
31.470
37.860
37.860
37.500
43.269
34.970
35.000
31.470
31.250
15.625

V-Freq .(Hz)

15.734

60.000

35.156
37.880
46.875
53.674
48.080
37.900
34.500
38.000
38.600
32.700
38.000
49.720
48.360
68.677
60.023
56.476
60.310
48.500
44.000
63.480
36.000

56.250
60.320
75.000
85.060
72.190
61.030
55.380
60.510
60.310
51.090
60.510
74.550
60.000
84.997
75.030
70.070
74.920
60.020
54.580
79.350
87.170

62.040
61.000
35.522

77.070
75.700
86.960

46.900
47.000
58.030
60.240
64.200
62.500
63.900
63.340
63.740
71.690
81.130
63.980
79.976
60.000
61.200
71.400

58.200
58.300
72.000
75.080
70.400
58.600
60.000
59.980
60.010
67.190
76.107
60.020
75.025
60.000
65.200
75.600

59.880
70.090
70.090
74.380
72.810
75.000
85.000
66.600
66.670
59.880
50.000
50.000

ON-SCREEN
DISPLAy
SXGA 13
SXGA 14
SXGA 15
SXGA 16
SXGA 17
SXGA 18
SXGA 19
SXGA 20
SXGA+ 1
SXGA+ 2
SXGA+ 3
SXGA+ 4
SXGA+ 5
SXGA+ 6
SXGA+ 7
MAC 21
MAC
MAC
WXGA 1
WXGA 2
WXGA 3
WXGA 4
WXGA 6
WXGA 7
WXGA 8
WXGA 9
WXGA 10
WXGA 11
WXGA 12
WUXGA 1
WUXGA 2
WSXGA +1
WXGA +1
WXGA +2
UXGA 1
UXGA 2
UXGA 3
UXGA 4
UXGA 5
720p
720p
1035i
1080i

1080p

1080psf/30
1080psf/25
1080psf/24

RESOLUTION
1280x1024
(Interlace)
1280x1024
(Interlace)

1280x1024
1280x1024
1152x900
1280x1024
(Interlace)

1280x1024
1280x1024
1400x1050
1400x1050
1400x1050
1400x1050
1400x1050
1400x1050
1400x1050
1152x870
1280x960
1280x1024
1366x768
1360x768
1376x768
1360x768
1280x768
1280x768
1280x768
1280x800
1280x800
1280x800
1280X800
1920x1200
1920x1200
1680x1050
1440x900
1440x900
1600x1200
1600x1200
1600x1200
1600x1200
1600x1200
1280x720
1280x720
1920x1035
(Interlace)
1920x1080
(Interlace)
1920x1080
(Interlace)

1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080

H-Freq .
(kHz)
50.000

V-Freq .(Hz)

50.000

94.000

63.370
76.970
61.850
46.430
63.790
91.146
63.970
65.350
65.120
64.030
62.500
64.744
65.317
68.680
75.000
80.000
48.360
47.700
48.360
56.160
47.776
60.289
68.633
49.600
41.200
49.702
63.980
74.556
74.038
65.290
55.935
74.918
75.000
81.250
87.500
93.750
106.250
45.000
37.500
33.750

60.010
72.000
66.000
86.700
60.180
85.024
60.190
60.120
59.900
60.010
58.600
59.948
59.978
75.060
75.080
75.080
60.000
60.000
60.000
72.000
59.870
74.893
84.837
60.050
50.000
59.810
60.020
59.885
59.950
59.954
59.887
60.000
60.000
65.000
70.000
75.000
85.000
60.000
50.000
60.000

33.750

60.000

28.125

50.000

33.750
28.125
27.000
67.5000
56.250
33.750
28.125
27.000

30.000
25.000
24.000
60.000
50.000
60.000
50.000
27.000

86.000

⁄

⁄
⁄
⁄
⁄
⁄
⁄
⁄
⁄
⁄

⁄
⁄

PNote:
⁄ True cannot	be	selected	when	is	selected.	(p.42)

79

Appendix
When an input signal is digital from the DVI terminal, refer to the chart below.
ON-SCREEN
DISPLAy
D-VGA
D-480p
D-575p
D-SVGA
D-XGA
D-WXGA 1
D-WXGA 2
D-WXGA 3
D-WXGA 4
D-WXGA 5
D-WXGA 6
D-WXGA 7
D-WXGA 9
D-WXGA 10
D-WXGA 11
D-WXGA 12
D-SXGA 1
D-SXGA 2
D-SXGA+ 1
D-SXGA+ 2
D-SXGA+ 3
D-SXGA+ 4
D-SXGA+ 5

RESOLUTION
640x480
720x480
720x575
800x600
1024x768
1366x768
1360x768
1376x768
1360x768
1366x768
1280x768
1280x768
1280x800
1280x800
1280x800
1280x800
1280x1024
1280x1024
1400x1050
1400x1050
1400x1050
1400x1050
1400x1050

H-Freq .
(kHz)
31.470
31.470
31.250
37.879
43.363
48.360
47.700
48.360
56.160
46.500
47.776
60.289
49.600
41.200
49.702
63.980
63.980
60.276
63.970
65.350
65.120
64.030
62.500

V-Freq .(Hz)
59.940
59.880
50.000
60.320
60.000
60.000
60.000
60.000
72.000
50.000
59.870
74.893
60.050
50.000
59.810
60.020
60.020
58.069
60.190
60.120
59.900
60.010
58.600

ON-SCREEN
DISPLAy
D-SXGA+ 6
D-SXGA+ 7
D-UXGA
D-WUXGA 2
D-WSXGA+ 1
D-WXGA+ 1
D-720p
D-720p
D-1035i
D-1080i
D-1080psf/30
D-1080psf/25
D-1080psf/24

D-1080p

RESOLUTION
1400x1050
1400x1050
1600x1200
1920 x 1200
1680 x 1050
1440x900
1280x720
1280x720
1920x1035
(Interlace)
1920x1080
(Interlace)
1920x1080
(Interlace)

1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080

H-Freq .
(kHz)
64.744
65.317
75.000
74.038
65.290
55.935
45.000
37.500
33.750

V-Freq .(Hz)

33.750

60.000

28.125

50.000

33.750
28.125
27.000
33.750
28.125
27.000
67.500
56.250

60.000
50.000
48.000
74.250
74.250
74.250
148.500
148.500

59.948
59.978
60.000
59.950
59.954
59.887
60.000
50.000
60.000

PNote:
	 •	 Depending	on	the	condition	of	signals	and	the	type	and	length	of	cables,	these	signals	may	not	be	properly	viewed.
	 •	 Specifications	are	subject	to	change	without	notice.

The CE Mark is a Directive
conformity mark of the European
Community (EC).

Pixelworks ICs used.

80

This symbol on the nameplate
means the product is Listed by
Underwriters Laboratories Inc. It
is designed and manufactured to
meet rigid U.L. safety standards
against risk of fire, casualty, and
electrical hazards.

Appendix
Technical Specifications
Mechanical Information
Projector Type
Dimensions (W x H x D)
Net Weight
Feet Adjustment
Panel Resolution
LCD Panel System
Panel Resolution
Number of Pixels
Signal Compatibility
Color System
SD/HD TV Signal
Scanning Frequency
Optical Information
Projection Image Size (Diagonal)
Throw Distance
Projection Lens
Projection Lamp
Interface
Input 1
Input 2
Input 3
Analog Out
Audio Out
Audio In 1/2
Audio In 3
R/C Jack
Control Port
USB Connector
LAN Connection Terminal
Audio
Internal Audio Amp
Built-in Speaker
Power
Voltage and Power Consumption
Operating Environment
Operating Temperature
Storage Temperature
Remote Control
Battery
Operating Range
Dimensions
Net Weight
Accessories
Owner’s Manual (CD-ROM)
Quick Reference Guide
AC Power Cord
Remote Control and Batteries
USB Cable

ü
ü

Multi-media Projector
PLC-XM80L :19.25” x 6.46” x 14.61” (489.5 mm x 164.0 mm x 371.1 mm)
PLC-XM80 : 19.25” x 6.46” x 17.12” (489.5 mm x 164.0 mm x 434.8 mm)
PLC-XM80L : 18.7 lbs (8.5kg)
PLC-XM80 : 20.5 lbs (9.3 kg)
0˚ to 4˚
0.8” TFT Active Matrix type, 3 panels
1,024 x 768 dots
2,359,296 (1,024 x 768 x 3 panels)
PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N
480i, 480p, 575i, 575p, 720p, 1035i, 1080i and 1080p
H-sync. 15 kHz–100 kHz, V-sync. 48 Hz–100 Hz
Adjustable from 40” to 400” (PLC-XM80)
4.3' (1.3m) - 75.4' (22.9m) (PLC-XM80)
F1.7–2.3 lens with f=26.9 mm–45.4 mm with motor zoom and focus
(PLC-XM80)
275 W lamp
Digital (DVI-D) x 1, Analog (Mini D-sub 15 pin) x 1
BNC Type x 5 (G or Video/Y, B or Pb-Cb, R or Pr-Cr, H/HV and V)
RCA Type x 3 (Video/Y, Pb/Cb,Pr/Cr), Mini DIN 4 pin x 1 (S-video)
Analog RGB (Mini D-sub 15 pin) Terminal x 1
Audio (Mini Type stereo) x 1
Audio (Mini Type stereo) x 1
RCA Type x 2
Mini jack (Wired Remote) x 1
D-sub 9 pin x 1
USB Series B x 1
RJ45
7.0 W RMS
1 speaker, ø1.46" (37mm)
AC 100–120 V (4.4A Max. Ampere), 50/60 Hz (The U.S.A and Canada)
AC 100–240 V (4.4-1.8A Max. Ampere), 50/60 Hz for other countries
41˚F–104˚F (5˚C–40˚C)
14˚F–140˚F (-10˚C–60˚C)
AAA or LR03 Type x 2
16.4’ (5 m/±30˚)
1.8” (W) x 1.0” (H) x 5.7” (D) (45 mm x 25 mm x 145 mm)
3.5 oz (99 g) (including batteries)
Lens Cap (for PLC-XM80)
Lens Mount Cover (for PLC-XM80L)
Lens Antitheft screw *
VGA Cable
PIN Code Label

* Contact the dealer where you purchased
the projector or the service center about the
Lens Antitheft Screw.

The specifications are subject to change without notice.
LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the
pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.

81

Appendix
Optional Parts
The parts listed below are optionally available. When ordering those parts, specify the item name and Model No. to the sales
dealer.

Model No.
Standard Zoom Lens

: LNS-S20

Long Zoom Lens

: LNS-T20

Ultra Long Zoom Lens

: LNS-T21

Short Zoom Lens

: LNS-W20

Short Fixed Lens

: LNS-W21

SCART-VGA Cable

: POA-CA-SCART

Lens Replacement
The lens of this projector can be replaced with other optional lens. This feature enables you to use the projector for wide
variety of uses.
For installation and replacement of the lens, always contact the sales dealer. The projector lens must be installed or replaced
by well-trained sales or service engineers. Do not attempt to install and replace the lens by yourself as it may cause injury.

Do not hold the lens when carrying or lifting the projector. It may cause serious damage to the projector.
To the sales and service engineers:
For the lens replacement and lens installation, refer to the installation manual of the optional lens. Before replacing and
installing the lens, make sure that you are using the lens with the correct Type No.

Pj Link Notice
This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System
Industries Association). The projector supports all commands defined by PJLink Class 1 and is verified conformance with
PJLink Standard Class 1.
Projector Input
Input 1

Input 2

Input 3

RGB (PC analog)
RGB (Scart)
RGB (PC digital)
RGB (AV HDCP)
Video
Y, Pb/Cb,Pr/Cr
RGB
Video
Y, Pb/Cb,Pr/Cr
S-video

PJLink Input
RGB 1
RGB 2
DIGITAL 1
DIGITAL 2
VIDEO 1
VIDEO 2
RGB 3
VIDEO 3
VIDEO 4
VIDEO 5

Parameter
11
12
31
32
21
22
13
23
24
25

PJLink is a registered trademark of JBMIA and pending trademark in some countries.

8

Appendix
Configurations of Terminals
ANALOG/ MONITOR OUT (Mini D-sub 15 pin)

Input
4

5
10
15

9
14

2

3
8
13

1
7

12

6
11

1


4
5
6
7
8

Red Input
Green Input
Blue Input
No Connect
Ground (Horiz.sync.)
Ground (Red)
Ground (Green)
Ground (Blue)

+5V Power
Ground (Vert.sync.)
Ground

9
10
11
1
1
14
15

DDC Data

9
10
11
1
1
14
15

No Connect
Ground (Vert.sync.)
No Connect
No Connect
Horiz. sync. Output
Vert. sync. Output
No Connect

Horiz. sync. Input (Composite H/V sync.)

Vert. sync. Input
DDC Clock

Output
1


4
5
6
7
8

Red Output
Green Output
Blue Output
No Connect
Ground (Horiz.sync.)
Ground (Red)
Ground (Green)
Ground (Blue)

1


4
5
6
7
8

T.M.D.S. Data2–
T.M.D.S. Data2+
T.M.D.S. Data2 Shield
No Connect
No Connect
DDC Clock
DDC Data
No Connect

DIGITAL DVI-D (DVI 4 PIN)

1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24

1

3

4

T.M.D.S. Data1–
T.M.D.S. Data1+
T.M.D.S. Data1 Shield
No Connect
No Connect
+5V Power
Ground (for +5V)
Hot Plug Detect

17
18
19
0
1


4

T.M.D.S. Data0–
T.M.D.S. Data0+
T.M.D.S. Data0 Shield
No Connect
No Connect
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock–

LAN TERMINAL

USB CONNECTOR (Series B)

2

9
10
11
1
1
14
15
16

1


4

Vcc
- Data
+ Data
Ground

1


4

TX +
TX –
RX +
-----

5
6
7
8

----RX –
---------

87654321

CONTROL PORT CONNECTOR (D-sub 9 pin)
Serial
1


4
5
6
7
8
9

----RXD
TXD
----SG
----RTS
CTS
-----

8

Appendix
PIN Code Number Memo
Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost
the number and unable to operate the projector, contact the service center.

PIN Code Lock No .
Factory default set No: 1   4*

Logo PIN Code Lock No .
Factory default set No: 4   1*
* Should the four-digit number be
changed, the factory set number will
be invalid.

While the projector is locked with the PIN code...
Put the label below (supplied) on in a prominent place of
the projector’s body while it is locked with a PIN code.

84

Appendix
Dimensions
Unit: inch (mm)
Screw Holes for
Ceiling Mount
Screw: M6
Depth: 0.393 (10.0)

7.25(184.2)

3.31(84.0)

16.39(416.2)

3.80(96.6)

4.34(110.3)
19.27(489.5)

7.70(195.5)

6.89(175.0)

5.91(150.0)
6.46(164.0)

5.91(150.0)

9.20(233.6)

2.95(75.0)

1.18(30.0)
6.30(160.0)

17.12(434.8)

13.58(344.9)

14.61(371.1)

6.67(169.5)

3.34(84.7)

4°

6.25(158.8)
3.78(96.0)

85

Appendix
Serial Control Interface
This projector provides a function to control and monitor the projector's operations by using the RS-232C serial port.

Operation

1

Connect a RS-232C serial cross cable to CONTROL PORT
on the projector and serial port on the PC. (See p.19)



Launch a communication software provided with PC and
setup the communication condition as follows:
Baud rate
Parity check
Stop bit
Flow control
Data bit

: 9600 / 19200 bps
: none
:1
: none
:8

PNote:
	 		The	default	of	the	baud	rate	is	set	to	19200 bps.	If	an	
error	occurs	in	the	communication,	change	the	serial	port	
and	the	communication	speed	(baud	rate).



Type the command for controlling the projector and then enter
the "Enter" key.
Example
When you want to change the input to INPUT 2, Type 'C' '0' '6'
'Enter'.

PNote:
Enter with ASCII 64-byte capital characters and one-byte
characters.

86

Appendix

Functional Execution Command
Format
The command is sent from PC to the projector with the
format below;
'C' [Command] 'CR'
Command: two characters (refer to the command
table below.
-The projector decodes the command and returns the 'ACK'
with the format below;
'ACK' 'CR'
-When the projector can not decode the command, it returns
with format below.
‘?’ ‘CR’

Command
C00

Function
Turn the projector ON

C01

Turn the projector OFF
(immediately OFF)

C02
C05
C06
C07
C09
C0A
C0B
C0C
C0D
C0E
C0F
C10
C1C
C1D
C20
C21
C23
C24
C25
C28
C29
C33
C34
C35

Turn the projector OFF
Select Input 1
Select Input 2
Select Input 3
Volume +
Volume Sound mute ON
Sound mute OFF
Video mute ON
Video mute OFF
Aspect 4:3
Aspect 16:9
Menu ON
Menu OFF
Brightness UP
Brightness DOWN
Select Input 2 Video
Select Input 2 Y, Pb/Cb,Pr/Cr
Select Input 2 RGB
ON Start ON
ON Start OFF
Select Input 3 Video
Select Input 3 S-video
Select Input 3 Y, Pb/Cb,Pr/Cr

Command
C3A
C3B
C3C
C3D
C3F
C46
C47
C4A
C4B
C50
C51
C52
C53
C5D
C5E
C5F
C60
C89
C8E
C8F

Function
Pointer RIGHT
Pointer LEFT
Pointer UP
Pointer DOWN
Enter
Zoom DOWN
Zoom UP
Focus DOWN
Focus UP
Select Input 1 Analog RGB
Select Input 1 SCART
Select Input 1 DVI (PC Digital)
Select Input 1 DVI (AV HDCP)
Lens shift UP
Lens shift DOWN
Lens shift LEFT
Lens shift RIGHT
Auto PC adj.
Keystone UP
Keystone DOWN

87

Appendix

Status Read Command
Format
The command is sent from PC to the projector with the
format below;
'CR' [Command] 'CR'
Command: one character (refer to the command table
below.
The projector decodes the command and returns the
'Character string' with the format below;

Command

CR0

Function

Status Read

Projector
Return

Projector status

00

Power On

80

Stand-by mode

40

Countdown

20

Cooling down

10

Power Malfunction

28

Cooling down at the temperature anomaly

24

Cooling down at Power Management mode

04

Power Management mode after Cooling down

81

Cooling down after the projector is turned off when the lamps
are out.
Stand-by mode after Cooling down when the lamps are out.

88

Stand-by mode after Cooling down at the temperature
anomaly.

21

S1 = Temperature at Sensor 1 (˚C)
S2 = Temperature at Sensor 2 (˚C)
S3 = Temperature at Sensor 3 (˚C)
CR6

Temperature Read

S1 S2 S3

(ex.) S1 = 12.3˚C������ S2 =
= 23.4˚C��� S3 =
= 34.5˚C
--> The projector displays “12.3 23.4 34.5”
(For each sensor, two digit and the tenth place numbers are
displayed with a space between each temperature.)

?

Communication failure

The tables on page 87 and 88 show the typical command lists for controlling the projector. Please consult your local dealer
for further information of other commands.

88

KW8AL



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract
Create Date                     : 2012:10:24 22:26:27+09:00
Modify Date                     : 2012:10:25 23:10:58+09:00
Has XFA                         : No
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2012:10:25 23:10:58+09:00
Format                          : application/pdf
Document ID                     : uuid:7618f223-1588-4630-8250-db075d72813d
Instance ID                     : uuid:ad01556a-668f-4674-863f-e98b9c510160
Page Layout                     : SinglePage
Page Mode                       : UseOutlines
Page Count                      : 89

EXIF Metadata provided by EXIF.tools