Sanyo Refrigerator Sr S155Sbp H Users Manual

Sanyo Refrigerator SR-S155SBP-H P020120328711249076066

SR-S155SBP-H to the manual 91fd978c-d0ee-4dbd-adbf-66b08ffbb5b3

: Sanyo Sanyo-Refrigerator-Sr-S155Sbp-H-Users-Manual-338140 sanyo-refrigerator-sr-s155sbp-h-users-manual-338140 sanyo pdf

Open the PDF directly: View PDF .
Page Count: 1

Download
Open PDF In Browser	View PDF

USER'S MANUAL AND WARRANTY CERTIFICATE
REFRIGERATOR MODEL :

This refrigerator is produced in a highly controlled supervision using the newest
technology. We prioritize safety and security in using the refrigerator. Before using
the refrigerator, read this user's manual thoroughly that consists of : important safety
measures, instruction for first installation, operating instructions, storing foods and drinks,
cleaning the frost, maintenance, at this conditions, public information, special
information and troubleshooting.

Do not use the refrigerator for storing drugs of
chemical substances. Household refrigerator can
not be used for storing those things because
they need highly controlled temperature.

Gas

Alcohol
100%

Gasoline

Serial No.

REFRIGERATOR
Model SR-S155SBP-H

Drug

Do not allow children to hang on the upper part
of the refrigerator. It may cause their hands
squeezed and the refrigerator may fall down.

WARRANTY
REGISTRATION

Do not splash water into the refrigerator unit.
The insulation of electric parts will be impaired
by water and will cause short circuit or fire.

Do not use flame-able spraying materials near
the refrigerator. It may cause fire and injury.

Date of Purchase

Invoice No

Dealer

SR-S155SBP-H

(Name)

(Address)

Customer's Name and Address

THANK YOU FOR USING OUR PRODUCT.
This manual describes in detail how to use the
refrigerator specifically designed to meet your needs
and expectations. Before using the refrigerator,
read this manual thoroughly and completely.
Please keep this manual properly.

When there is a malfunction or short circuit,
ask for the sanyo service centers advice when
installing the ground.

Do not repair by dismantling the refrigerator's
parts. It may cause sparks or injury.

IMPORTANT

TO VALIDATE YOUR ONE (1) YEAR WARRANTY COMPLETE
AND MAIL THIS CARD WITHIN 10 DAYS

DETACH AND RETAIN THIS PORTION - RETURN ABOVE

Make sure that electric voltage is in accordance
Make sure that the current is 5 Ampere.

Do not allow the power cord being clipped by
the rear part of the refrigerator. It may result
a short circuit.

Do not insert our hands into the freezer room and
touching the evaporator. Our hands will be stiff
and sticky and may be injured.

Do not store glass bottles and the like in the
freezer room. The bottles will be broken or may
cause injury.

1 Year Warranty

CONTENT

Serial No.

Important Safety Measures
Instructions For First Installation
Operating Instructions
Storing Foods and Drinks
Cleaning the Frost
Maintenance
At this conditions
Public Information
Special Information
Troubleshooting

2
4
5
7
8
9
10
11
12
13

THE POSITION FOR INSTALLATION

Do not use multiple electric sockets when using
the refrigerator. It may cause fire.

Do not use damaged or loose power cord.
It may result sparks or a short circuit.

Make sure that the power cord fits the electric
socket. If not, it may result a short circuit.

Do not allow the power cord being clipped by
the legs of the refrigerator or touching the hot
compressor. It may result a short circuit.

REFRIGERATOR
Do not put water's stuff above refrigerator's door
if it fall down when opening-closing door, the
splashing water into the installation of electrical
parts, will cause short circuit or fire.

Avoid placing the refrigerator in the damp area
to prevent corrosion and electric current
induction.

Do not touch the sides and back of the refrigerator
cabinet and the mechanical parts at the back of
the refrigerator because their temperature is high
(this is important for customer information because
since condenser is located in the refrigerator sides
that cause it to become hot).

When refrigerator will be transfer from one place
to another, unplug the power cord, lift it by two
persons cautiously. Do not lift it in sideways
position.

Model SR-S155SBP-H
Customer's Name
Dealer

Date of Purchase
Address
Branch

Product warranty certificate
This SANYO product quality is guaranteed for one (1) year from the date of purchase against original defect
in material or worksmanship under normal use following strictly the instruction manual. The compressor is guaranteed
for (5) years while refrigerant and other consumable items are not covered by this warranty after one (1) years from the
date of original purchase.
Sanyo Service Corporation (SSC) shall perform the services and replacement of parts free of change covered by
this one (1) year warranty to its ulmost effort. There will be corresponding charges for labor, adjustments and parts after
the warranty period. SSC will not be liable for damages direct or otherwise arising out of delays on failure in furnishing
part of service caused by Acts of God, Act of Government (national or local), environmental factors, labor disputes,
difficulties or failure of transportation, force majeur or other causes beyond its control, or for damages resulting from
delay in performing the services the covered by this warranty.
The guarantee shall be valid upon purchase, mailed and duly register with SSC within ten (10) days.
The warranty shall be void if the units has been tempered with or repaired by other then SSC or its authorized
service shops.

Present this Warranty Card together with your Sales Invoice/Official Receipt upon request for Service.

NAMES OF REFRIGERATOR'S PARTS

Unstable installation may result in vibration and sound; to make the position
stable, adjust the leg.

DESCRIPTION
1. Top Table

1
9

2

2. Door Evap

1. Set cold control knob at "OFF" position and then plug AC cord into an electrical
outlet. Motor should not be operate.
2. Interior lamp should light "ON" when door is opened.
3. Set cold control knob at "MAX" position and let refrigerator operate for about
30 ~ 45 minutes. Freezing compartment should get slightly frosted and motor
should run smoothly except for a soft hum noise.

To avoid rotten smell, things like meat, fish,
shrimp, etc. should be cleaned beforehand,
wrapped with plastic or put into a box.

The foods stored should be arranged nicely
and should not be too close to each other so
that the cooling circulation is perfect.

Bottles of drinks should be cleaned first so that
cleanliness of the refrigerator interior can be
maintained.

Hot drinks and foods should be cooled outside
first before they are stored in the refrigerator.

CONTROLLING THE TEMPERATURE

3. Tray Ice Cube

3
When located on the floor made of vinyl, mat, or carpet, place a piece of board
under it. If the bottom of the refrigerator is hot, the board color will change.
Avoid direct sunlight ; hot equipments like stove, magic jar, and the like
they will decrease the cooling power. When those equipments are not situated
far enough from the refrigerator, the cooling power will weakened and the
electricity will be wasted.
Place the refrigerator at a location having
free space around it. Allow sufficient free
space at the backside of the refrigerator
at least 12 cm and 30 cm from the top
table so that the air circulation is perfect.

4. Tray Chiller

4

5. Wire shelf

10

5

GROUND INSTALLATION

6. Shelf Crisper
7. Crisper (for Vegetable)

6

8. Leg

7

11

Min 30 cm

Min
12 cm

10. Rack Middle

8

11. Rack Bottle

Install ground because when the refrigerator is malfunction
or having a short circuit, it will cause electric shock.

Grounding Wire

Refigerator Unit

Knob thermo

9. Tray Egg (Rack Upper)

NAMES OF PLACE AND THEIR FUNCTIONS

Install ground when :
The floor is damp.
The refrigerator is next to washing area where water usually flows.
The refrigerator is situated in the basement where water leakage and
evaporation may happen.
Ground Installation
Connect ground line to the screw join at
the backside of the refrigerator.
Attach the ground wire (Green / yellow color wire located at the lower left
portion at the back of the refrigerator) to any metal pipe or to a cover screw
of the wall receptacle or to a rod buried at least 2.4 meters in the ground.
Ground must not be connected to :
Pipe made of plastic.
Gas pipe because It may cause fire or explosion.
Telephone line or lightning rod. It will be dangerous if there is a thunder.

Refrigerator temperature can be adjusted by turning cold control
knob. The closer to "MAX" position cold control is set by being
turned clockwise, the lower refrigerator temperature becomes.
Usually setting at " 5 " position, is practical.
Set cold control at " MAX " position only when ice cubes are
needed in a hurry or frozen foods are stored in freezing
compartment. In this case, be sure to reset cold control at
ordinary setting after ice cubes have been produced or frozen
foods have been removed. Refrigerator temperature will vary
depending on the quantity of the foods stored and the
frequency with which door is opened.

Button defrost

Push Button Defrosting
To start defrosting, push defrost button at the center of cold control knob. When
defrosting is completed, refrigerator restarts cooling operation automatically. After
defrosting discard the water in tray chiller. If you desire to re-start refrigeration before
defrosting is completed, pull out the defrost button.

EVAPORATOR (FREEZER ROOM)
Place for frozen foods

TRAY CHILLER PARTITION

REFRIGERATOR ROOM
Storage for cool drinks, fresh foods
Storage for fruits

DOOR ROOM
Drinks storage
Snacks storage

COLD AIR

REFRIGERATOR ROOM

SR-S155SBP-H

Storage for vegetables
Storage for fruits

Note :
The handle of refirgerator is available as a model

OPERATING THE REFRIGERATOR
Before using refrigerator, clean it and make test running All of the following instruction
should make satisfaction when tested in the following order. If not, check electricity
supply.When the cause of trouble cannot be located, contact your Sanyo dealer.

Note :-To cool the fresh food compartment more,
please remove the tray chiller partition.
However, if the temperature is too cold, kindly
return it to original location.

MAKING AND REMOVING ICE CUBES
MAKING ICE
Fill the ice cube tray with clean-boiled water to the maximum of 80%
of the volume of the tray. (The inside end of the tray). figure 1
Put the ice cube tray into the freezer.
REMOVING THE ICE CUBE FROM THE TRAY
Twist the ice cubes tray with two hands so that the ice can be easily
removed. (figure 2)
water level

TRAY CHILLER

THE COOLING PROCEDURES
Natural cooling method.
This refrigerator uses direct cooling method.
The cool air from the freezer will flow naturally and will cool all interior room of
the refrigerator.
The frost accumulated in the refrigerator will weakened the cooling power of the
freezer.
Note : This product is intended for household use.

(figure1)

(figure 2)

Do not remove the ice cubes from the tray using water because it
will spill and the ice cubes will reintegrate with the tray and this will make
it difficult to remove.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Page Count                      : 1
Page Mode                       : UseOC
Page Layout                     : SinglePage
Creator                         : AutoCAD Mechanical 2010 2010 (18.0s (LMS Tech))
Title                           : Model
Producer                        : pdfplot10.hdi 10.0.55.0
Create Date                     : 2010:07:15 10:11:02
Modify Date                     : 2010:07:15 10:11:02

EXIF Metadata provided by EXIF.tools