Sanyo Va 80Ex Cm8C Cm8S Users Manual
VA-CM8CCM8S to the manual 5a92d3fe-3846-42c7-ae3a-1bb49a717453
2015-01-26
: Sanyo Sanyo-Va-80Ex-Va-Cm8C-Cm8S-Users-Manual-337598 sanyo-va-80ex-va-cm8c-cm8s-users-manual-337598 sanyo pdf
Open the PDF directly: View PDF 
.
Page Count: 3
| Download | |
| Open PDF In Browser | View PDF |
L9BHK_WA(VA-80EX).book 0 ページ ２００７年１月１２日 金曜日 午後３時３５分 INSTRUCTION MANUAL Outdoor Housing VA-80EX This installation should be made by a qualified service person and should conform to all local codes. About this manual This housing is designed for outdoor installation. Before installing and using this unit, please read this manual carefully. Be sure to keep it handy for later reference. Example of pendant mounting 182 (7.2) Example of wall mounting 6 (0.2) Color: Beige Material: Metal Waterproof Standard: Conforming to IP66 Operating Environment (with power source connected) : Temperature; -30°C - +50°C (-22°F - +122°F) Humidity; less than 90% RH (no condensation) Weight: Approx. 2.5 kg (5.5 lb) Dimensions: Accessories Ǿ248 (9.8) Unit: mm (inch) Hexagonal wrench Screws, washers (for power board unit) Waterproof tape Features and specifications are subject to change without prior notice or obligations. b Specifications of Heater (built into VA-CM8C/CM8S) Automatic switch ON/OFF temperature: ON; Approx. 5°C (41°F) OFF; Approx. 15°C (59°F) Power supply: 24 V AC ± 10%, 50/60Hz Power consumption: Max. 35 W (When heater turned on) Français Español Deutsch b Specifications 中文简体 • Be careful when opening holes for installing the unit. Work with the power and video cables pulled out for easy installation. • Make sure to properly perform waterproofing for the ceiling or wall where you are installing the unit. • Make sure that the surface in the installation location has no unevenness and is strong enough to bear the total weight of the unit. 日本語 Important English CAUTION: Install this housing securely according to this installation manual. Be aware that allowing the bracket to fall with the camera on it may cause personal injury. L9BHK_WA(VA-80EX).book 1 ページ ２００７年１月１２日 金曜日 午後３時３５分 Safety precautions CAUTION: Changes or modifications not expressly approved by the manufacturer may void the user’s authority to operate this equipment. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: To reduce a risk of fire or electric shock, do not expose this product to rain or moisture. For the customers in Canada This class B digital apparatus complies with Canadian ICES-003. CAUTION: • Do not touch the connection cables and the power supply plug with wet hands. • Do not insert any metal, inflammable, or foreign object into the cable hole. Doing so may cause fire or electric shock. • Since this product does not have waterproof construction, do not expose it to water or other liquids. Also, do not install it in a bathroom or shower room. Doing so may cause fire or electric shock. • Do not install the product on unsteady surfaces as it may fall and cause injury or damage. • Do not expose the product to shocks or install it in places subject to vibration. b WEEE Symbol Information Please note: Your SANYO product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste. Please dispose of this equipment at your local community waste collection/recycling centre. In the European Union there are separate collection systems for used electrical and electronic products. Please help us to conserve the environment we live in! This symbol mark and recycle system are applied only to EU countries and not applied to the countries in the other area of the world. 1 L9BHK_WA(VA-80EX).book 2 ページ ２００７年１月１２日 金曜日 午後３時３５分 Assembling the Outdoor Housing ● For the built-in heater and fan in the dome cover, you need an additional 24 V AC power supply. ● This housing is used in combination with a dome cover (clear/smoked) and a mounting bracket (wall/ pendant) that are sold separately. ☞ For how to install an assembled housing, refer to the instruction manual for the bracket used. Also refer to the instruction manual for each associated device. 1. Attaching the dome cover 3. Connecting cables the safety wire (A) of the dome cover on hook 1 Hook hole (A’) located inside the housing. 1 Connect the 24 V AC power cable to the terminal (F). the heater cable (B) to the heater terminal 2 Connect (B’) and the fan cable (C) to the fan terminal (C’). C F A B 2 Connect other cables to the power board unit. B’ ☞ For details, please refer to “Connections and Settings” in the Installation Manual that comes with the camera unit. Dome Cover: • VA-CM8C (Clear) • VA-CM8S (Smoked) A’ C’ 4. Mounting the camera unit 2. Mounting the power board unit the camera unit safety wire (G) to the hook 1 Fasten (G’) inside the power board unit. the supplied screws through power board 1 Pass unit screw holes (D) and fasten them loosely using the arrows (E) of the same color (blue) on the 2 Align camera unit and the housing inner face, and push washers 2 (4 places). the camera until you hear a click. Mount the power board unit in the housing aligning the arrows (E) of the same color (blue) on them, and then firmly tighten the screws loosely fastened in the previous step. • Make sure the terminal (F) and its cable are located along the inner lateral face of the housing. • Pull the video cable led from the ceiling or wall toward the power board unit. Power Board Unit: VA-84S/80S D 3 Remove the plastic cover (H) of the camera unit. the dome cover by fastening 4 screws (J) 4 Attach using the supplied hexagonal wrench. G’ D Video cable D G D a E; Blue b E; Blue F the housing onto the mounting bracket (wall/ 3 Fix pendant). * J * ☞ For details, please refer to “Outdoor Type” in the Mounting Bracket Instruction Manual. H J J * To remove the camera unit J 2
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Page Count : 3 Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-14, framework 1.6 About : uuid:1c81e1d9-a260-458c-9e4c-ec4e7b036440 Modify Date : 2007:04:23 00:06:53+01:00 Create Date : 2007:04:12 10:09:24+09:00 Metadata Date : 2007:04:23 00:06:53+01:00 Document ID : uuid:99fb1e76-07d6-4d1e-8524-a809491fce05 Format : application/pdf Title : Creator : PScript5.dll Version 5.2 Author : Producer : Acrobat Distiller 5.0.5 (Windows)EXIF Metadata provided by EXIF.tools