Sargent 8895 Exit Device Active Trim Installation Instructions A6911D

User Manual: Sargent 8895 Exit Device Active Trim Installation Instructions Instruction Sheets

Open the PDF directly: View PDF PDF.
Page Count: 1

INSTALLATION INSTRUCTIONS
8895 Exit Device Active Trim
FOR INSTALLATION ASSISTANCE CALL SARGENT AT 1-800-727-5477 • www.sargentlock.com
Copyright © 2012, Sargent Manufacturing Company,
an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written
permission of Sargent Manufacturing Company is prohibited.
A6911D
1
2
3
4
U.S. PATENT NO. 268003
CANADIAN PATENT NO. RD 1981
• Doorshouldbettedandhung
• mullionshouldbeinstalledifused
• Availablestocklengths
Length E–32"door.Nocut-offrequired.
Canbecuttotdoorsdownto24"wide.
Length F–36"door.Nocut-offrequired.
Canbecuttotdoorsdownto30"wide.
Length G–48"door.Nocut-offrequired.
Canbecuttotdoorsdownto36"wide.
FORNARROWSTILEDOORS(1-3/4"-2-1/2"STILE)SUBTRACT3"FROMDOORSIZE.
FORWIDESTILE(2-3/4"MIN.STILE)SUBTRACT4"FROMDOORSIZE.
BEFORE STARTING
ATTACH MOUNTING
PLATE TO DOOR
IF CUTTING IS REQUIRED, DETERMINE CUT-OFF LENGTH “X” AS FOLLOWS:
LEVEL RAIL AND ATTACH SECOND MOUNTING PLATE
ATTACH END CAPS TO MOUNTING
PLATES WITH COVER SCREWS
19-8895 shown
(Touch Pad is Omitted)
USE (3) ROUND HEAD SCREWS
(DO NOT TIGHTEN)
3"
41" FROM FINISHED FLOOR
CUT-OFF LENGTH
DOOR SIZE
FOR DOORS WITH STILE, CUT-OFF MUST
LEAVE 1/2" MIN. OVERLAP WITH RAIL. SLIDE RAIL UNDER
MOUNTING PLATE
LEVEL
TIGHTEN ALL SCREWS
BOTH MOUNTING
PLATES TIGHT
AGAINST INSERT
THRU-BOLTING
APPLICATION
HINGE SIDE OF DOOR
EDGE OF DOOR
MOUNTING PLATE
END CAP
USE (2) ROUND HEAD
SCREWS AND GROMMET
NUTS PER MTG. PLATE
CUT-OFF
AND
DEBURR
1-1/8"FOR1-3/4"-2-1/2"DOORSTILE
1-1/2"FOR2-3/4"ANDOVERDOORSTILE
FORFLUSHDOORSTHISDIM.MAYBECHANGEDASDESIRED.

Navigation menu