Sargent 2018 Price Book (as Of 5/1/18) May 1

User Manual: Sargent 2018 Sargent Price Book (as of 5/1/18) Price Book

Open the PDF directly: View PDF .
Page Count: 492 [warning: Documents this large are best viewed by clicking the View PDF Link!]

00.Front.May2018.032818 copy
01.GI.May2018.032718 copy
02.CK.May2018.032518 copy
03.BL.May2018.032718 copy
04.ML.May2018.032818 copy
05.MP.May2018.032718 copy
06.DC.May2018.032818 copy
07.HS.May2018.032118
08.ED.May2018.032718 copy
09.AL.May2018.032118
10.SP.May2018.032118
11.EL.May2018.032118
12.PS.May2018.032718 copy

GENERAL INFORMATION

GI-1 May 1, 2018

GI-2 May 1, 2018

GI-3 May 1, 2018

GI-4 May 1, 2018

GI-5 May 1, 2018

GI-6 May 1, 2018

GI-7 May 1, 2018

GI-8 May 1, 2018

GI-9 May 1, 2018

GI-10 May 1, 2018

GI-11 May 1, 2018

GI-12 May 1, 2018

GI-13 May 1, 2018

GI-14 May 1, 2018

GI-15 May 1, 2018

GI-16 May 1, 2018

GI-17 May 1, 2018

GI-18 May 1, 2018

GI-19 May 1, 2018

GI-20 May 1, 2018

GI-21 May 1, 2018

GI-22 May 1, 2018

GI-23 May 1, 2018

GI-24 May 1, 2018

GI-25 May 1, 2018

GI-26 May 1, 2018

GI-27 May 1, 2018

GI-28 May 1, 2018

GI-29 May 1, 2018

GI-30 May 1, 2018

GI-31 May 1, 2018

GI-32 May 1, 2018

GI-33 May 1, 2018

GI-34 May 1, 2018

GI-35 May 1, 2018

GI-36 May 1, 2018

GI-37 May 1, 2018

GI-38 May 1, 2018

GI-39 May 1, 2018

GI-40 May 1, 2018

CYLINDERS & KEYING

CK-1 May 1, 2018

CK-2 May 1, 2018

CK-3 May 1, 2018

CK-4 May 1, 2018

CK-5 May 1, 2018

CK-6 May 1, 2018

CK-7 May 1, 2018

CK-8 May 1, 2018

CK-9 May 1, 2018

CK-10 May 1, 2018

CK-11 May 1, 2018

CK-12 May 1, 2018

CK-13 May 1, 2018

CK-14 May 1, 2018

CK-15 May 1, 2018

CK-16 May 1, 2018

CK-17 May 1, 2018

CK-18 May 1, 2018

CK-19 May 1, 2018

CK-20 May 1, 2018

CK-21 May 1, 2018

CK-22 May 1, 2018

CK-23 May 1, 2018

CK-24 May 1, 2018

CK-25 May 1, 2018

CK-26 May 1, 2018

CK-27 May 1, 2018

CK-28 May 1, 2018

CK-29 May 1, 2018

CK-30 May 1, 2018

CK-31 May 1, 2018

CK-32 May 1, 2018

CK-33 May 1, 2018

CK-34 May 1, 2018

CK-35 May 1, 2018

CK-36 May 1, 2018

CK-37 May 1, 2018

CK-38 May 1, 2018

BORED LOCKS

BL-1 May 1, 2018

BL-2 May 1, 2018

BL-3 May 1, 2018

BL-4 May 1, 2018

BL-5 May 1, 2018

BL-6 May 1, 2018

BL-7 May 1, 2018

BL-8 May 1, 2018

BL-9 May 1, 2018

BL-10 May 1, 2018

BL-11 May 1, 2018

BL-12 May 1, 2018

BL-13 May 1, 2018

BL-14 May 1, 2018

BL-15 May 1, 2018

BL-16 May 1, 2018

BL-17 May 1, 2018

BL-18 May 1, 2018

BL-19 May 1, 2018

BL-20 May 1, 2018

BL-21 May 1, 2018

BL-22 May 1, 2018

BL-23 May 1, 2018

BL-24 May 1, 2018

BL-25 May 1, 2018

BL-26 May 1, 2018

BL-27 May 1, 2018

BL-28 May 1, 2018

BL-29 May 1, 2018

BL-30 May 1, 2018

BL-31 May 1, 2018

BL-32 May 1, 2018

BL-33 May 1, 2018

BL-34 May 1, 2018

BL-35 May 1, 2018

BL-36 May 1, 2018

BL-37 May 1, 2018

BL-38 May 1, 2018

BL-39 May 1, 2018

BL-40 May 1, 2018

BL-41 May 1, 2018

BL-42 May 1, 2018

BL-43 May 1, 2018

BL-44 May 1, 2018

BL-45 May 1, 2018

BL-46 May 1, 2018

BL-47 May 1, 2018

BL-48 May 1, 2018

BL-49 May 1, 2018

BL-50 May 1, 2018

BL-51 May 1, 2018

MORTISE LOCKS

ML-1 May 1, 2018

ML-2 May 1, 2018

ML-3 May 1, 2018

ML-4 May 1, 2018

ML-5 May 1, 2018

ML-6 May 1, 2018

ML-7 May 1, 2018

ML-8 May 1, 2018

ML-9 May 1, 2018

ML-10 May 1, 2018

ML-11 May 1, 2018

ML-12 May 1, 2018

ML-13 May 1, 2018

ML-14 May 1, 2018

ML-15 May 1, 2018

ML-16 May 1, 2018

ML-17 May 1, 2018

ML-18 May 1, 2018

ML-19 May 1, 2018

ML-20 May 1, 2018

ML-21 May 1, 2018

ML-22 May 1, 2018

ML-23 May 1, 2018

ML-24 May 1, 2018

ML-25 May 1, 2018

ML-26 May 1, 2018

ML-27 May 1, 2018

ML-28 May 1, 2018

ML-29 May 1, 2018

ML-30 May 1, 2018

ML-31 May 1, 2018

ML-32 May 1, 2018

ML-33 May 1, 2018

ML-34 May 1, 2018

ML-35 May 1, 2018

ML-36 May 1, 2018

ML-37 May 1, 2018

ML-38 May 1, 2018

ML-39 May 1, 2018

ML-40 May 1, 2018

ML-41 May 1, 2018

ML-42 May 1, 2018

ML-43 May 1, 2018

ML-44 May 1, 2018

ML-45 May 1, 2018

ML-46 May 1, 2018

ML-47 May 1, 2018

ML-48 May 1, 2018

ML-49 May 1, 2018

ML-50 May 1, 2018

ML-51 May 1, 2018

ML-52 May 1, 2018

ML-53 May 1, 2018

ML-54 May 1, 2018

ML-55 May 1, 2018

ML-56 May 1, 2018

ML-57 May 1, 2018

ML-58 May 1, 2018

ML-59 May 1, 2018

ML-60 May 1, 2018

ML-61 May 1, 2018

ML-62 May 1, 2018

ML-63 May 1, 2018

ML-64 May 1, 2018

ML-65 May 1, 2018

ML-66 May 1, 2018

ML-67 May 1, 2018

ML-68 May 1, 2018

ML-69 May 1, 2018

ML-70 May 1, 2018

ML-71 May 1, 2018

ML-72 May 1, 2018

ML-73 May 1, 2018

ML-74 May 1, 2018

ML-75 May 1, 2018

ML-76 May 1, 2018

ML-77 May 1, 2018

ML-78 May 1, 2018

ML-79 May 1, 2018

ML-80 May 1, 2018

ML-81 May 1, 2018

ML-82 May 1, 2018

ML-83 May 1, 2018

ML-84 May 1, 2018

ML-85 May 1, 2018

ML-86 May 1, 2018

ML-87 May 1, 2018

ML-88 May 1, 2018

ML-89 May 1, 2018

ML-90 May 1, 2018

ML-91 May 1, 2018

ML-92 May 1, 2018

ML-93 May 1, 2018

ML-94 May 1, 2018

ML-95 May 1, 2018

ML-96 May 1, 2018

ML-97 May 1, 2018

ML-98 May 1, 2018

ML-99 May 1, 2018

ML-100 May 1, 2018

ML-101 May 1, 2018

ML-102 May 1, 2018

ML-103 May 1, 2018

ML-104 May 1, 2018

ML-105 May 1, 2018

ML-106 May 1, 2018

ML-107 May 1, 2018

ML-108 May 1, 2018

ML-109 May 1, 2018

ML-110 May 1, 2018

ML-111 May 1, 2018

ML-112 May 1, 2018

ML-113 May 1, 2018

ML-114 May 1, 2018

ML-115 May 1, 2018

ML-116 May 1, 2018

ML-117 May 1, 2018

ML-118 May 1, 2018

ML-119 May 1, 2018

ML-120 May 1, 2018

ML-121 May 1, 2018

ML-122 May 1, 2018

ML-123 May 1, 2018

ML-124 May 1, 2018

ML-125 May 1, 2018

ML-126 May 1, 2018

ML-127 May 1, 2018

ML-128 May 1, 2018

ML-129 May 1, 2018

ML-130 May 1, 2018

ML-131 May 1, 2018

ML-132 May 1, 2018

ML-133 May 1, 2018

ML-134 May 1, 2018

✍✍ Checklist ✍✍

Your price book should contain the following dated pages. If any pages are missing, return this list with the missing items

circled and we will forward them to you.

COMPANY NAME: _______________________________________________________________________________________________________

ADDRESS: _____________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

ATTN: ________________________________________________________________________________________________________________

ML-135 May 1, 2018

ML-136 May 1, 2018

ML-137 May 1, 2018

ML-138 May 1, 2018

ML-139 May 1, 2018

ML-140 May 1, 2018

ML-141 May 1, 2018

ML-142 May 1, 2018

ML-143 May 1, 2018

ML-144 May 1, 2018

ML-145 May 1, 2018

ML-146 May 1, 2018

ML-147 May 1, 2018

ML-148 May 1, 2018

ML-149 May 1, 2018

ML-150 May 1, 2018

ML-151 May 1, 2018

ML-152 May 1, 2018

ML-153 May 1, 2018

ML-154 May 1, 2018

ML-155 May 1, 2018

ML-156 May 1, 2018

ML-157 May 1, 2018

ML-158 May 1, 2018

ML-159 May 1, 2018

ML-160 May 1, 2018

ML-161 May 1, 2018

ML-162 May 1, 2018

ML-163 May 1, 2018

ML-164 May 1, 2018

ML-165 May 1, 2018

ML-166 May 1, 2018

ML-167 May 1, 2018

ML-168 May 1, 2018

ML-169 May 1, 2018

ML-170 May 1, 2018

ML-171 May 1, 2018

ML-172 May 1, 2018

ML-173 May 1, 2018

ML-174 May 1, 2018

ML-175 May 1, 2018

MULTI-POINT

LOCKING HARDWARE

MP-1 May 1, 2018

MP-2 May 1, 2018

MP-3 May 1, 2018

MP-4 May 1, 2018

MP-5 May 1, 2018

MP-6 May 1, 2018

MP-7 May 1, 2018

MP-8 May 1, 2018

MP-9 May 1, 2018

MP-10 May 1, 2018

MP-11 May 1, 2018

MP-12 May 1, 2018

MP-13 May 1, 2018

MP-14 May 1, 2018

MP-15 May 1, 2018

MP-16 May 1, 2018

MP-17 May 1, 2018

MP-18 May 1, 2018

MP-19 May 1, 2018

MP-20 May 1, 2018

MP-21 May 1, 2018

MP-22 May 1, 2018

MP-23 May 1, 2018

DOOR CLOSERS/

HOLDERS & STOPS

DC-1 May 1, 2018

DC-2 May 1, 2018

DC-3 May 1, 2018

DC-4 May 1, 2018

DC-5 May 1, 2018

DC-6 May 1, 2018

DC-7 May 1, 2018

DC-8 May 1, 2018

DC-9 May 1, 2018

DC-10 May 1, 2018

HS-1 May 1, 2018

HS-2 May 1, 2018

EXIT DEVICES

ED-1 May 1, 2018

ED-2 May 1, 2018

ED-3 May 1, 2018

ED-4 May 1, 2018

ED-5 May 1, 2018

ED-6 May 1, 2018

ED-7 May 1, 2018

ED-8 May 1, 2018

ED-9 May 1, 2018

ED-10 May 1, 2018

ED-11 May 1, 2018

ED-12 May 1, 2018

ED-13 May 1, 2018

ED-14 May 1, 2018

ED-15 May 1, 2018

ED-16 May 1, 2018

ED-17 May 1, 2018

ED-18 May 1, 2018

ED-19 May 1, 2018

ED-20 May 1, 2018

ED-21 May 1, 2018

ED-22 May 1, 2018

ED-23 May 1, 2018

ED-24 May 1, 2018

ED-25 May 1, 2018

ED-26 May 1, 2018

ED-27 May 1, 2018

ED-28 May 1, 2018

ED-29 May 1, 2018

ED-30 May 1, 2018

ED-31 May 1, 2018

ED-32 May 1, 2018

ED-33 May 1, 2018

ED-34 May 1, 2018

ED-35 May 1, 2018

ED-36 May 1, 2018

ED-37 May 1, 2018

ED-38 May 1, 2018

ED-39 May 1, 2018

ED-40 May 1, 2018

ED-41 May 1, 2018

ED-42 May 1, 2018

ED-43 May 1, 2018

ED-44 May 1, 2018

ED-45 May 1, 2018

ED-46 May 1, 2018

ED-47 May 1, 2018

ED-48 May 1, 2018

ED-49 May 1, 2018

ED-50 May 1, 2018

ED-51 May 1, 2018

ED-52 May 1, 2018

ED-53 May 1, 2018

ED-54 May 1, 2018

ED-55 May 1, 2018

ED-56 May 1, 2018

ED-57 May 1, 2018

ED-58 May 1, 2018

ED-59 May 1, 2018

ED-60 May 1, 2018

ED-61 May 1, 2018

ED-62 May 1, 2018

ED-63 May 1, 2018

ED-64 May 1, 2018

ED-65 May 1, 2018

ED-66 May 1, 2018

ED-67 May 1, 2018

ED-68 May 1, 2018

ED-69 May 1, 2018

ED-70 May 1, 2018

AUXILIARY LOCKS

AL-1 May 1, 2018

AL-2 May 1, 2018

AL-3 May 1, 2018

AL-4 May 1, 2018

AL-5 May 1, 2018

AL-6 May 1, 2018

AL-7 May 1, 2018

AL-8 May 1, 2018

SPECIALTY HARDWARE

SP-1 May 1, 2018

SP-2 May 1, 2018

SP-3 May 1, 2018

SP-4 May 1, 2018

SP-5 May 1, 2018

SP-6 May 1, 2018

SP-7 May 1, 2018

SP-8 May 1, 2018

SP-9 May 1, 2018

SP-10 May 1, 2018

SP-11 May 1, 2018

SP-12 May 1, 2018

SP-13 May 1, 2018

SP-14 May 1, 2018

ELECTRICAL

EL-1 May 1, 2018

EL-2 May 1, 2018

EL-3 May 1, 2018

EL-4 May 1, 2018

EL-5 May 1, 2018

EL-6 May 1, 2018

EL-7 May 1, 2018

EL-8 May 1, 2018

EL-9 May 1, 2018

EL-10 May 1, 2018

EL-11 May 1, 2018

EL-12 May 1, 2018

PROFILE SERIES

PS-1 May 1, 2018

PS-2 May 1, 2018

PS-3 May 1, 2018

PS-4 May 1, 2018

PS-5 May 1, 2018

PS-6 May 1, 2018

PS-7 May 1, 2018

PS-8 May 1, 2018

PS-9 May 1, 2018

PS-10 May 1, 2018

PS-11 May 1, 2018

PS-12 May 1, 2018

PS-13 May 1, 2018

PS-14 May 1, 2018

PS-15 May 1, 2018

PS-16 May 1, 2018

✍✍ Checklist ✍✍

Your price book should contain the following dated pages. If any pages are missing, return this list with the missing items

circled and we will forward them to you.

COMPANY NAME: _______________________________________________________________________________________________________

ADDRESS: _____________________________________________________________________________________________________________

_______________________________________________________________________________________________________________________

ATTN: ________________________________________________________________________________________________________________

Price Book No. 31

EFFECTIVE DATE:

May 1, 2018

THIS PRICE BOOK SUPERSEDES AND TAKES

PRECEDENCE OVER ANY OF OUR PRODUCT

CATALOGS IN TERMS OF PRODUCT AVAILABILITY.

CONTACT SARGENT MANUFACTURING CO. FOR PRICES AND

AVAILABILITY OF NON-STANDARD AND SPECIAL ITEMS NOT

LISTED IN THIS PRICE BOOK

Price Book No. 31

EFFECTIVE DATE:

Canada Effective May 7, 2018

ANNOUNCEMENT

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Note that some products may not be available in Canada as well as some of the

programs offered in this price book may differ between the USA and Canada.

For Terms & Conditions and Warranty information pertaining to product sales

in Canada, please visit www.assaabloy.ca/terms

Please contact your sales representative for more information.

General Information

USA Terms & Conditions GI-1 - GI-5

USA RGA Policy GI-4

USA Product Modification GI-5

Partner Services in Canada GI-6

Limited Warranty GI-7 - GI-8

Finishes GI-9

Merchandising Aids GI-10 - GI-11

Weight Charge - Screw Substitutions GI-12

Master Prefix Listing GI-13 - GI-17

Business Hours & Holiday Schedule GI-18

Who's Who at Sargent GI-19 - GI-22

Ordering Tips GI-23 - GI-25

Order Forms GI-26 - GI-40

Cylinders & Keying

How to Order / Key Control Types CK-1

Keying Charges CK-2 - CK-3

Key Charts, Key Wizard Software CK-4

Mortise, Rim Cylinders & Parts CK-5

Rings, Turn Knobs & Mail Box Cylinders CK-6

Cylindrical Lock Cylinders & Parts CK-7

SARGENT XC Series Cylinders CK-8 - CK-9

SARGENT Large Format Interchangeable Core

Cylinders & Old Style Removable Core Cylinders CK-10

SARGENT XC - Large Format IC Core Cylinders CK-11

Small Format Interchangeable Core CK-12

XC - Small Format Interchangeable Core CK-13

Keying Kits, Tools, Gauges, Components CK-14

Keyblanks CK-15 - CK-16

SARGENT Cut Keys/Competitor Keyways CK-17

KESO F1 Security System CK-18 - CK-22

KESO System CK-23 - CK-27

Signature Key System CK-28 - CK-31

Degree Key System CK-32 - CK-38

Bored Locks

How to Order / ANSI Finish & Function Comparison BL-1

T-Zone (11 Line) BL-2 - BL-15

10 Line BL-16 - BL-27

7 Line BL-28 - BL-35

6500 Line BL-36

DL Series BL-37 - BL-45

RDL Series BL-44 - BL-45

8X Line BL-46 - BL-47

6 Line BL-48 - BL-51

Mortise Locks 7800/8200

How to Order / ANSI Finish & Function Comparison ML-1

8200 Line (levers) ML-2 - ML-75

7800 Line (Knobs) ML-76 - ML-87

8200 Deadlocks ML-88

Distributor Bulk Pack Trim Program ML-89 – ML-92

7800/8200 Lockbodies ML-93

7800/8200 Working Trim Sets ML-94 - ML-105

7800/8200 Assemblies & Parts ML-106 - ML-118

How to Order / ANSI Finish & Function Comparison ML-119

7900 Mortise Lock ML-120 - ML-152

High Security Mortise Lock 9200

How to Order - ANSI Finish & Function Comparison ML-153

9200 & M9200 - Levers ML-154 - ML-161

9200 & M9200 - Knobs ML-162 - ML-169

9200 BHW ML-170 - ML-171

9200 Deadlock, Lockbodies ML-172

9200 Parts ML-173

9200 Inside Trim Set ML-174

9200 Outside Trim Set ML-175

Multipoint Locking Hardware

How to Order - ANSI Finish & Function Comparison MP-1

7000 Series MP-2 - MP-3

AD7000 Series MP-4 - MP-5

WD7000 Series MP-6 - MP-7

ER/ES/ET Lever Control Trim MP-8 - MP-9

7000 Strikes, Locking Slide & Spindle Kits MP-10

Parts MP-11

FM6100 Series MP-12 - MP-13

FM7300 Series MP-14 - MP-23

Door Closers/Holders & Stops

How to Order / ANSI Finish & Function Comparison DC-1

Additional Features DC-2

1431 / 281 / 351 Series DC-3

268, 269, 281 Security Package Closer DC-4

422 Cam Action Door Closer DC-4

268, 269, 278 Concealed Closers DC-4

Finish Options DC-5

Arms & Accessories DC-6

Bodies/Covers/Retrofit Kits DC-7

1331 / 1131 Series DC-8

Parts DC-9 - DC-10

Overhead Holders & Stops HS-1

Electromagnetic Holders & Stops HS-2

Exit Devices

How to Order - ANSI Finish & Function Comparison ED-1

20 Series ED-2 - ED-3

30 Series ED-4 - ED-5

9898 Reversible Stocking Exit ED-6 - ED-7

80 Series ED-8 - ED-37

9400 Series ED-38 - ED-39

90 Series ED-40 - ED-45

Trim ED-46 - ED-49

8893/8895 Inactive & Active Push Bars ED-50 - ED-51

Mullions & Accessories ED-52 - ED-56

Parts ED-57 - ED-70

Auxiliary Locks

470 SSL1 Series AL-1

480 Series AL-2

4870 Series AL-3

460-480-4870 Strikes & Parts AL-4

4870 Parts AL-5

Locker, Utility, & Cabinet Locks AL-6

758 Padlock & Parts AL-7

858 Padlock & Parts AL-8

TOC-1

TABLE OF CONTENTS

HOLDERS & STOPS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Specialty Hardware

HP Series Tubular Lock with Push/Pull (ALP)

rim & Options SP-1

114/115 Series with Push/Pull Trim& Options SP-2

114/115 Push/Pull Parts SP-3

8200 Series PUSH/PULL Trim (ALP) Options SP-4

8200 Series PUSH/PULL Trim (ALP) SP-5

8200 Series BHL Trim Options SP-6

8200 Series BHL Trim SP-7

8200 Series BHW Trim Options SP-8

8200 Series BHW Trim SP-9

7800 Series Push/Pull Trim(PT) Options SP-10

7800 Series Push/Pull Trim(PT) SP-11

7800 Series BHD Trim Options SP-12

7800 Series BHD Trim SP-13

7800 Series BHD IS and OS Trim SP-14

Electrical

Electro-Mechanical Locksets EL-1

Electro-Mechanical Exits EL-2

ElectroLynx / Wiring Diagram Service EL-3

Electronic Accessories EL-4 - EL-7

Alarms - 5100/5800 EL-8 - EL-9

Fire Guard Door Closers EL-10

Parts EL-11 - EL-12

Profile Series - Stand Alone Products

How to Order / ANSI Finish & Function Comparison PS-1

10 Line Cylindrical Lock - KP, G1, RF PS-2 - PS-3

8200 Series Mortise Lock - KP, G1, RF PS-4 - PS-7

80 Series - Exit Device - KP, G1, RF PS-8 - PS-9

Accessories PS-10

Parts & Accessories PS-11

10 Line Parts & Accessories PS-12

8200 Series Parts & Accessories PS-13 - PS-14

80 Series Trim & Trim Kits PS-15

80 Series Parts & Accessories PS-16

Price Book No. 31 | May 1, 2018

TOC-2

TABLE OF CONTENTS

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

GENERAL INFORMATION

TABLE OF CONTENTS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

GENERAL INFORMATION

USA Terms and Conditions .......................................................GI-1

USA Terms and Conditions .......................................................GI-2

USA Terms and Conditions .......................................................GI-3

USA Terms and Conditions .......................................................GI-4

USA Terms and Conditions .......................................................GI-5

Partner Services in Canada ......................................................GI-6

Limited Warranty........................................................................GI-7

Limited Warranty........................................................................GI-8

Finishes .....................................................................................GI-9

Merchandising Aids .................................................................GI-10

Merchandising Aids .................................................................GI-11

Weight Chart - Screw Substitutions ........................................GI-12

Master Option Listing (1-26)....................................................GI-13

Master Option Listing (28-65737P) .........................................GI-14

Master Option Listing (68-83)..................................................GI-15

Master Option Listing (84-SC).................................................GI-16

Master Option Listing (SE-WS) ...............................................GI-17

Business Hours, Holiday Schedule,

Website Information, Partner Services in USA .......................GI-18

Who's Who at SARGENT........................................................GI-19

Who's Who at SARGENT........................................................GI-20

Who's Who at SARGENT........................................................GI-21

Who's Who at SARGENT........................................................GI-22

Ordering Tips and SARGENT Key Systems Security Policy......GI-23

Ordering Tips and Keying Authorization Documentation ........GI-24

Ordering Tips...........................................................................GI-25

SARGENT Order Lead Sheet Check List ...............................GI-26

Keying Order Form..................................................................GI-27

Keying Order Form..................................................................GI-28

Keying Order Form..................................................................GI-29

Locksets Order Form...............................................................GI-30

Exit Devices Order Form .........................................................GI-31

Door Closers Order Form........................................................GI-32

Miscellaneous Items Order Form ............................................GI-33

Signature Series Order Form ..................................................GI-34

KESO Authorized Signature Form ..........................................GI-35

KESO Authorization Form .......................................................GI-36

KESO 24 Hour Key Order Form..............................................GI-37

Key Wizard™ Registration Form .............................................GI-38

Degree™ System Information Document ...............................GI-39

Degree™ DG1, DG2, DG3

Required Administrative Documents .......................................GI-40

GI-1

GENERAL INFORMATION

USA TERMS & CONDITIONS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Acceptance

SARGENT®reserves the right to decline an order, in whole or in part, when the type or quantity of goods or credit

worthiness of the Purchaser is not satisfactory to us in our sole and absolute discretion.

Purchase Orders, QUOTE requests, Acknowledgements or the like issued by the Purchaser that have contrary standard

terms and conditions are not binding on SARGENT®, unless such terms and conditions are approved in a separate

written agreement by SARGENT’s authorized representatives. In the event of an acceptance of Purchaser’s Purchase

Order by SARGENT®, the Purchaser agrees that such acceptance is solely conditioned on Purchaser’s acceptance of

the terms and conditions set forth in this instrument, regardless of the terms and conditions specified in the Purchaser’s

Purchase order. The terms and conditions in Purchaser’s Purchase order which conflict with terms and conditions of this

instrument shall be disregarded and are hereby rejected, and this instrument shall constitute the entire agreement

between SARGENT®and the Purchaser.

In the event that SARGENT®does not enforce or require strict performance of any term or condition hereof, or of any

other document, instrument or other agreement relating to goods sold, such lack of enforcement or requirement of

strict performance will not waive, affect or diminish any right of SARGENT®to enforce or require strict performance

of such term or condition in the future.

Prices

All prices are subject to change without notice and are not guaranteed. All shipments will be made at prices in effect

at the time of order acceptance.

Possession of this price list does not constitute an agreement to sell.

We reserve the right to correct clerical, stenographic and other obvious errors at any time.

Terms:

2% tenth net 30 days after statement date.

It is understood that SARGENT®may impose and charge a finance charge which is the lesser or one and one-half

percent (1-1/2%) per month or the highest rate allowed by law on any amount which becomes past due and delinquent.

Additionally the Customer shall be responsible for all collection costs, court costs and reasonable attorney’s fees (where

allowed by law) in connection with the recovery of any delinquent amount.

Freight

All orders are shipped FOB factory/warehouse, except as expressly provided below. When delivered to the Transportation

Company, the Purchaser assumes the risk of loss or damage in transit.

Customer orders with net product value in excess of $12,000.00 will be shipped prepaid by SARGENT’s carrier of choice

to a single destination point in the United States.

Customer orders with net product value less than $12,000.00 will be shipped prepaid by SARGENT’s carrier of choice and

freight and handling charges will be added to the customer’s invoice.

A minimum freight and handling charge of $15 will be charged on orders with net product value of $400 or less. The mini-

mum freight and handling charge will not apply to orders for only Cut (bitted) keys of any type, Master keys, Master keyed

cylinders or padlocks and factory generated bitting lists that do not have any other product types included on the order.

Freight on these orders will be charged as the percentage of invoice value.

For orders with net product value greater than $400 and less than $12,000, freight charges will be calculated as a per-

centage of the net invoice value and will be added to Customer’s invoice. The percentage is based on the National U.S.

Average On Highway Diesel Fuel Prices as reported by the US Department of Energy in effect at the beginning of each

quarter. On the first Monday of each quarter, the new rate will be published on the SARGENT and Door Security

Solutions extranet and will go into effect on the 2nd Monday of the quarter. Please refer to the Sargent distributor

extranet for the rate chart and information on the current freight charge percentage. The percentage in effect at the time

of shipment of the order will be charged.

Great Grand Master keys, Grand Master keys, Master keys, Construction Master keys, Control Keys, Lot Day Keys which

are shipped separate from customer order for security reasons, on orders with total net product value in excess of

$12,000.00 will be shipped prepaid by SARGENT’s carrier of choice. If the total order value is less than $12,000, the shipping

charges will be added to Customer’s invoice.

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

GI-2

GENERAL INFORMATION

USA TERMS & CONDITIONS

If a customer provides their own freight account # or freight collect for the freight charges, SARGENT will apply a

handling fee of $25 to the invoice.

Turbo Orders – All 1-Week Turbo orders are guaranteed to ship from SARGENT 5 working days after receipt of all

information necessary to process order or SARGENT will pay freight costs. If Turbo is held for credit reasons SARGENT

will not be responsible for freight costs.

Expedited shipping options – If the customer requests an expedited method of shipment such as “Next Day Air” the

charges will be prepaid by SARGENT and the full rate for the service, as published by the carrier, will be added to the

customer’s invoice.

Packing – SARGENT will pack, mark and ship the products according to its standard procedures for shipment, unless the

parties agree, in writing, that SARGENT will comply with any special instructions provided by the customer. Special

instructions must be submitted, in writing, at time of order placement. Compliance with special instructions may result in

an increased price.

Minimum Invoice:

Minimum order value for complete product is $250 net product value. The minimum order value for parts orders is

$100 net product value. In the event that the net product value does not meet the required net minimum, Sargent

may, at its sole discretion (a) apply a minimum order charge, (b) reject the order or (c) waive the minimum require-

ment provided that the waiver of the requirement for one order shall not constitute a waiver of the requirement for

any future orders.

The following products are exempt from this policy: Cut (bitted) keys of any type, Master keys, Master keyed cylinders

or padlocks and factory generated bitting lists.

Quotations:

Complete shipment of the order must be accepted by Purchaser within normal shipping lead times.

The QUOTE number must be referenced on the order.

Any invoiced order that has the incorrect discount applied to it and did not have a QUOTE copy attached to the order

or the QUOTE number written on the order will have a service fee of $100.00 net DEDUCTED from any sales credit

issued for the difference in discount.

The QUOTE is null and void if the Purchase Order does not include ALL product lines listed on the QUOTE or if the

quantities for an item covered by the QUOTE deviate by 10% or more.

With the issuance and acceptance of a QUOTE for the purchase of products, the Purchaser agrees that products so

purchased will not be resold or transferred to any Distributor not authorized by SARGENT®to sell its products. This would be

inclusive of branches of the quoted Distributor. Failure to abide by this restriction may result in the Distributor’s ineligibility for

Price Concession Authorizations, or other actions in SARGENT’s discretion.

SARGENT®and its sales representatives reserve the right, in their sole discretion and for any reason, to refuse a

Distributor’s request to quote a price other than SARGENT’s standard list price and regardless of whether SARGENT®

or its sales representatives have previously quoted discounted prices to the Distributor on some or all of its orders.

Non-Cataloged Products:

Products not cataloged or listed in this price book will be considered as special products, and will not be manufactured

without prior approval from SARGENT®. All non-cataloged goods cannot be changed or cancelled.

A minimum special handling charge of $50.00 will be added for non-cataloged product. Any additional labor or material

required will be charged accordingly.

Special products require special handling, and therefore standard lead times may not apply. Please consult with your

Sales Representative for further details.

GI-3

GENERAL INFORMATION

USA TERMS & CONDITIONS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Changes / Cancellation of Orders:

Changes or cancellations to an order will result in a charge of costs for material and labor expenses that have been

incurred prior to notification from Customer. If products have already been made and or are located in the shipping

room, the 45% restocking fee will apply. Handling charges are billed on Customer’s original order.

Suspended Line Items:

If a line item is suspended due to insufficient information, we will notify you via “Q” fax. If a response is not received

within 5 business days of the fax, the item(s) will be cancelled off the order. A new order will need to be placed for

the cancelled item(s).

Add–On Orders to QUOTE:

Any new order requesting special pricing to match an existing QUOTE number, which has already been ordered, will

be accepted up to 60 days after the acknowledgement of the original order. All add-on orders must reference the

original factory order number and the corresponding QUOTE number to receive the quoted pricing discount. Add-on

orders for stock will not be accepted.

Packaging:

Many items are defined as to Case Lot Packaging or Minimum Order. The case lot policy does not apply to hardware

to be used on a specific hardware project.

Delivery:

Orders will be acknowledged and given a scheduled delivery date based on estimated manufacturing lead times.

Complete information is required to process all orders. Orders with insufficient information for processing (i.e. keying

information, door sizes, etc.) may be subject to extended lead times which are relative to the time required in obtaining

the necessary information for order processing. Manufacturing lead time will begin once all information is received to

process an order. SARGENT®will use reasonable efforts to deliver products as estimated, but makes no guarantee’s

as to delivery dates.

SARGENT®will not be liable for back charges incurred based on availability of product or as a result of delays in

delivery caused by insufficient information required to process an order.

SARGENT®will not be held responsible for delays in delivery caused by strikes, fires, floods or any other causes

beyond our control, including the delivery of material to us. Under no circumstances shall SARGENT®be liable or

accountable for consequential damages due to failure of delivery.

Claims:

In the event of Company or Customer error, claims for shortages, pricing errors and/or incorrectly filled orders must

be submitted in writing to Customer Service within thirty (30) days from receipt of material.

Any claims for shortages or damage by the Carrier must be made by the Customer directly to the Carrier.

Limited Carrier insurance is typically offered for all orders. If the Customer requires additional insurance, please contact a

SARGENT®Customer Service Representative upon submittal of the order. SARGENT®will obtain requested insurance

and the additional cost will be included on Customer’s invoice.

Invoice Deduction:

A SARGENT®Sales Representative or Customer Service Representative must be notified of any disputed invoices

within sixty 60 days from the date of invoice. Deductions should only be taken for the disputed amount and the balance

of the invoice is due and payable within standard payment terms.

GI-4

GENERAL INFORMATION

USA TERMS & CONDITIONS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Returned Goods:

It is the policy of SARGENT®to not accept returns of any materials that are correctly furnished as per the Distributor’s

Purchase Order. Return of product due to customer order error or accommodation must be pre-arranged with SARGENT®

and approved in writing by Sales Management.

No Returns Accepted for the following: KESO, Signature, Degree, Keyed Cylinders, Specials, Anything Used, Discontinued,

Modified, or Damaged Product, Electrical products, Incomplete Products (e.g. missing keys, levers, roses, etc).

All products returned as “Goodwill” must meet the following criteria to be considered a return:

• Be in original, unmarked, and undamaged cartons.

• Be valued in excess of $250.00 net.

• Shipped and invoiced within the previous 120 days.

• Custom, non-cataloged goods, master-keyed or SARGENT®Turboship product is not returnable.

AMINIMUM restocking fee of 45% will be charged. Upon receipt and verification by SARGENT®that the returned

merchandise meets the foregoing conditions, a credit will be issued for the original invoice amount less the MINIMUM

45% restocking fee.

Defective goods and “Goodwill” products that meet the foregoing criteria, may be returned by fulfilling the following conditions:

• Send an RGA request in writing to the SARGENT®Sales Representative serving the Purchaser’s area.

• Ensure the RGA labels that are sent to Purchaser by SARGENT®are visible on return goods shipment.

• Ensure that the RGA number appears on the return shipment label and is legible.

• Return the authorized merchandise within sixty (60) days from the date of RGA issuance date.

• Return shipments must be freight prepaid to the location specified on the RGA. SARGENT®is not liable for

damages or shortages to product during shipping.

Electro Mechanical Defective Product Returns:

In addition to the above, the following conditions apply:

• Defective product return must be under warranty

• Case # must be used within 7 days of issuance

• Returned product must be found defective or nonfunctional upon test at factory

• Returned product must not have been damaged during installation process

No credit may be taken or issued prior to RGA approval and receipt of product.

All defective goods within the terms of our limited warranty may be returned for credit or replacement.

Taxes:

Prices do not include any present or future Federal, State, or Local property, license, privilege, sales, use, excise,

gross receipts or other like taxes or assessments, which may result from transactions or any services performed in

connection herewith.

Governing Law:

The rights and obligations of the parties shall be governed by the laws of the State of Connecticut, excluding any

conflicts of law provisions. The United Nations Convention on Contracts for the International Sale of Goods shall

not apply to this Agreement.

Limited Warranty:

The Terms and Conditions outlined above are subject to SARGENT®Limited Warranty, which is included in this

Price List and incorporated herein by reference.

GI-5

GENERAL INFORMATION

USA TERMS & CONDITIONS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Product Modifications:

SARGENT®products are not designed for or intended for aftermarket modification.The warranty on SARGENT®products

becomes void if the product is modified in any way, regardless of whether the modification causes or contributes to any

alleged defect. Warranty voiding modifications include, but are not limited to, third-party electrification of non-electric

products and/or the installation of non-approved or non-SARGENT®components.

If a SARGENT®product is modified it no longer meets industry certification and quality control standards applicable to

the original product and is no longer a genuine SARGENT®product. A modified product may not be sold as a SARGENT®

product and no SARGENT®trademarks or certification marks based on the original SARGENT®product, such as U.L.

or ANSI/BHMA marks, may appear anywhere on the modified product or on any packaging, literature or instructions

sold with the modified product.

All original SARGENT®packaging and literature carries SARGENT®trademarks and must be destroyed if the original

SARGENT®product is modified. Portions of the product that carry a SARGENT®trademark or certification mark, such

as mortise faceplates, lock bodies, etc. must be discarded and/or replaced by the party making the modification. U.L.

and other certification testing and marking are also the responsibility of the party making modification. The use of

SARGENT®trademarks on modified products constitutes trademark infringement.

Fire Rated Openings:

Any retrofit or other field modification to a fire rated opening can potentially impact the fire rating of the opening, and

SARGENT makes no representations or warranties concerning what such impact may be in any specific situation.

When retrofitting any portion of an existing fire-rated opening, or specifying and installing a new fire-rated opening,

please consult with a code specialist or local code official (Authority HavingJurisdiction) to ensure compliance with all

applicable codes and ratings.

Trademark Use Policy: ASSA ABLOY Americas

The following policy (“Policy”) of ASSA ABLOY Americas (“ASSA ABLOY”), and all of its affiliated group companies

(collectively, the “Group Companies”), applies to the use of certain intellectual property of all such Group Companies,

including all trademarks, names, logos, product images, and related information (the “ASSA ABLOY Marks”). ASSA

ABLOY Marks are proprietary and critical to the success of ASSA ABLOY and the Group Companies, and may only

be used in strict compliance with this Policy.

This Policy covers any person or entity reselling any product of any Group Company with the consent of such Group

Company (each, an “Approved Reseller”). Each Approved Reseller has a non-exclusive right to use certain of the

ASSA ABLOY Marks relating to any of the Group Companies for which it is an Approved Reseller, subject to the

following conditions:

(1) Approved Reseller’s use of ASSA ABLOY Marks must be truthful, fair, and not misleading;

(2) Approved Reseller’s advertising must clearly indicate that it is advertising of the Approved Reseller, and is not

advertising of ASSA ABLOY;

(3) Approved Reseller may not use any ASSA ABLOY Marks as part of or in connection with a domain name;

(4) Approved Reseller’s advertising must not imply or suggest an association between the Approved Reseller and

ASSA ABLOY other than that of buyer and seller;

(5) Approved Reseller’s use of ASSA ABLOY Marks must be a positive representation of ASSA ABLOY, the Group

Companies, and their products;

(6) Approved Reseller’s trade name must be more predominant on Approved Reseller’s advertising than the

ASSA ABLOY Marks;

(7) Approved Reseller’s use of ASSA ABLOY Marks must include the trademark symbol ® or TM, as appropriate,

along with the following trademark legend printed in legible text on the Web page or document containing ASSA

ABLOY Marks: “[describe ASSA ABLOY Marks] are trademarks or registered trademarks of ASSA ABLOY, Inc.

or one of its affiliates in the United States and other countries.”;

(8) Approved Reseller must not make modifications of any ASSA ABLOY Marks; and

(9) Approved Reseller may use only ASSA ABLOY Marks associated with the Group Companies for which it is an

Approved Reseller (e.g., an Approved Reseller that sells Group Company X products but not Group Company Y

products may use Group Company X trademarks in connection with its sale of Group Company X products, but

may not use Group Company Y trademarks).

GI-6

GENERAL INFORMATION

PARTNER SERVICES IN CANADA

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

PARTNER SERVICES IN CANADA

Business Hours: Customer Service Hours: 8:00 AM to 4:30 PM Eastern Standard Time.

Toll Free Telephone Number: 1-800-461-3007

Order Fax Number: 1-800.461.8989.

Order email: orders.dss.ca@assaabloy.ca

RGA email: rga.dss.ca@assaabloy.com

Technical Support email: techsupport.dss.ca@assaabloy.com

Customer Support: Ontario email: customerservice.dss.caontario@assaabloy.com

Customer Support: East email: customerservice.dss.caeast@assaabloy.com

Customer Support: West email: customerservicedss.cawest@assaabloy.com

For Terms & Conditions and Warranty information pertaining

to product sales in Canada, please visit www.assaabloy.ca/terms.

Note that some products may not be available in Canada as well as some of the programs

offered in this price book may differ between the USA and Canada. Please contact your sales

representative for more information.

2018 Canadian Calendar:

• May 21, 2018 (Victoria Day)

• July 2, 2018 (Canada Day)

• August 6, 2018 (Civic Holiday)

• September 3, 2018 (Labour Day)

• October 8, 2018 (Thanksgiving)

• November 23, 2018 (Inventory)

• December 25, 2018 (Christmas)

• December 26, 2018 (Boxing Day)

• January 1, 2019 (New Year’s Day)

GI-7

GENERAL INFORMATION

LIMITED WARRANTY

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

ASSA ABLOY reserves the right to review Approved Reseller’s usage of ASSA ABLOY at any time and may:

(a) require changes to the use of ASSA ABLOY Marks at any time in its sole discretion, which changes must be

implemented within 30 days of written notice to Approved Reseller;

(b) condition the use of ASSA ABLOY Marks on ASSA ABLOY’s prior approval use, which approval may be

withheld in its sole discretion;

Approved Reseller; and

(d) revoke permission to use ASSA ABLOY Marks immediately upon notice to Reseller in the event Approved

Reseller is in violation of this Policy, or of any agreement with ASSA ABLOY or any Group Company.

Approved Reseller’s right to use ASSA ABLOY Marks in no way conveys to Approved any proprietary or economic

interest in any ASSA ABLOY Marks.

Use of ASSA ABLOY Marks in violation of this Policy may result in severe civil and liabilities. ASSA ABLOY will

vigorously enforce this Policy by seeking all appropriate remedies, including, but not limited to, pecuniary damages

and injunctive relief.

TECHNICAL INFORMATION AND ADVICE:

(a) All designs, data and specifications provided by company are proprietary and will not be disclosed or reused

by customer without the prior written consent of Company;

(b) Company assumes no obligation or liability for any advice given by Company, the results obtained, or dam-

ages incurred, and all such advice is given and accepted at Customer risk.

LIMITED WARRANTY:

SARGENT®warrants that its products sold under the “SARGENT” trade name in the United States of America are

free from defects in workmanship and materials under normal use and service.

This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance,

improper storage, shipping and handling, corrosion, erosion, ordinary wear and tear, misuse, abuse, accident,

unauthorized service, or use with unauthorized non-SARGENT products or parts.

This warranty is void if any modification is made to the warranty product, regardless of whether the modification causes

or contributes to the alleged defect. All modifications are made at the risk of the party making the modification.

The only liability of SARGENT®, in tort or contract whether under this warranty or otherwise, shall be limited to the

repair or replacement of any product or component part which shall prove defective as covered by this warranty,

within the stated time period listed below, after delivery to the original purchaser.

• T-Zone (11-Line) Bored-In Lever Lock 10 years

• 281, 351, 1431, 1331 Series Closer Body 25 years

• 1131 Series Closer Body 15 years

• 268, 269, 278, 422 Series Closer Body 10 years

• 9200/8200/7800 Mortise Lock 10 years

• FM6100, FM7300, 10L Bored-In Lever Lock 7 years

• 7000 Vertical Rod Lock, 7900 Mortise Lock 5 years

• 80 Series/Exit Trim/90 Series Exit Device, 56- Electric Latch Retraction Option 5 years

• Overhead Holders & Stops 5 years

• 7L Bored-In Lever Lock 5 years

• 8X Line Bored-In Knob Lock 3 years

• 20/30 Exit Device or Trim 3 years

• All Electromechanical and Electronic Products 2 years

• All other SARGENT products 1 year

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

GI-8

GENERAL INFORMATION

LIMITED WARRANTY

Cylinders for Competitor Products:

SARGENT cylinders or cores for use in non-SARGENT manufactured locking devices for which SARGENT has an

equivalent, will be assessed an additional Cylinder Service Fee. This fee applies to masterkeyed cylinder only orders,

1 bitted high security cylinders and zero or 1 bitted restricted cylinder orders

Warranty for Cylinders Factory or Field Combinated:

Cylinders shall be periodically lubricated depending on environmental conditions. Dry graphite, molybdenum disulfide

or Polylube(trademark) are recommended. Petroleum based liquid lubricants should only be used in cylinders in

harsh or corrosive environments and should not be mixed with dry lubricants.

SARGENT®cylinders and/or core warranty will be voided if used in non-SARGENT®locking devices.

Warranty for Cylinders Field Combinated:

1. Keys shall be cut to the SARGENT®key bitting specifications required for the particular keyway and depth system.

2. All pin lengths shall be selected according to prevailing factory standards.

3. Original SARGENT®cylinder components, including pin tumblers and key blanks, shall be used.

4. We reserve the right to void the warranty if we deem that a malfunction is a result of non-original components

which do not conform to SARGENT®standards.

Keying Systems:

All bittings shall be originated by the SARGENT®Key Systems Department to be compatible with one another in a specific

type of cylinder (conventional, security, high security, interchangeable core, removable core) and within a particular

keying system.

SARGENT®will not pay for the cost of repair performed other than in accordance with this warranty.

SARGENT®will not be held responsible in any way for any field generated bitting systems.

Refer to our Returned Goods Policy regarding the return of a product or component part believed to be defective as

covered by this warranty. A brief description of the defect will be required. Product will be examined upon return.In the

event such examination reveals a defect covered by this warranty, the product will be repaired or replaced.

THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. TO THE EXTENT PERMITTED BY LAW,

ALL IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THIS WARRANTY. SARGENT®MANUFACTURING

COMPANY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. NO AGENT, SALES

REPRESENTATIVE OR DEALER HAS THE AUTHORITY TO INCREASE OR ALTER THE OBLIGATIONS OF THIS

WARRANTY.

SOME STATE DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION

OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS

MAY NOT APPLY TO YOU.

THIS WARRANTY GIVE YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH

VARY FROM STATE TO STATE.

SARGENT®Manufacturing Company

GI-9

GENERAL INFORMATION

FINISH

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Finishes

Items will be furnished only in finishes as listed in this price book. Not all finishes are available for all product lines. Consult

each product section for applicable finishes.

SARGENT Symbol BHMA Symbol Material

3(BHMA 605) Bright brass, clear coated

4(BHMA 606) Satin brass, clear coated

9(BHMA 611) Bright bronze, clear coated

10 (BHMA 612) Satin bronze, clear coated

10B (BHMA 613) Dark oxidized satin bronze, oil rubbed

10BE (BHMA 613E) Dark oxidized satin bronze - equivalent

10BL (BHMA 614) Dark oxidized satin bronze, clear coated

14 (BHMA 618) Bright Nickel, clear coated

15 (BHMA 619) Satin Nickel, clear coated

20D (BHMA 624) Statuary bronze dark powder coated

26 (BHMA 625) Bright chromium plated

26D (BHMA 626) Satin chromium plated

32 (BHMA 629) Bright stainless steel

32D (BHMA 630) Satin stainless steel

BSP n/a Black suede powder coat

WSP n/a White suede powder coat

Exposed Metal Parts Furnished same finish as Escutcheon or Rose Bushing

SARGENT Symbol BHMA Symbol Painted Finishes

EB (BHMA 690) Sprayed bronze enamel or polyester powder coated to match finish 10B

ED (BHMA 693) Sprayed black enamel or polyester powder coated to match finish 20D

EN (BHMA 689) Sprayed aluminum enamel or polyester powder coated

EP (BHMA 691) Sprayed bronze enamel or polyester powder coated to match finish 10

EAB (BHMA 696) Brass enamel or polyester powder coated to be used with brass finishes

ERD Red powder coat

When prime coat is required the EN finish will be furnished as this is suitable for painting.

GI-10

GENERAL INFORMATION

MERCHANDISING AIDS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Note: Sample mounts only. Hardware needs to be ordered separately.

Cylinder Price

DG-3110 Degree Cylinder Sample Kit $250.00

Bored Lock (Solid Light Oak Block)

MSB001 6 and 8 Line Bored Locks And 480 Deadlock – 2-3/4" Backset Only $167.00

MSB002 6500 / 7 / 10 Line Cylindrical Lock $178.00

MSB007 T-Zone (11 Line) Series Bored Lock $178.00

MSB014 DL Series $158.00

7800/8200/8200BHL/9200 Line Locks (Solid Light Oak Block)

MSM004 15 Function

$490.00MSM005 05, 24, 25, 45, 50 Functions

MSM003 04 & 37 functions

MSM015 9200 Series $195.00

Roseless Trim Locks (Maiman Thermal Fused flush door, Paraon Cherry Block)

MSM010 R8237 Roseless $150.00

MSM011 Roseless 5 lever $670.00

MSB012 RDLU65 Roseless $99.00

8200 ALP Trim (Maiman Thermal Fused flush door, Gentle Anigre Block)

MSB013 HP Series ALP $132.00

MSM012 8215 ALP

$217.00MSM013 8205, 25, 45, 50 ALP

MSM014 8204& 37 ALP

8200 BHW Trim

MSM023 Passage

$260.00MSM024 Cylinder

MSM025 Cylinder and Turn Button

4870 Line Locks (Solid Light Oak Block)

MSM001 4875/77 Series

$179.00MSM002 4874 Series

MSB009 SSL1

114 and 115 Hospital Latch

MSB010 Solid Light Oak Block for 2 -3/4" Backset only $146.00

Exit Devices (Solid Light Oak Block)

MSE006 8810 only (E- size rail only)

$324.00

MSE018 9710 only

MSE019 9800 with STS trim

MSE020 9900 with STS trim

Door Closers (Solid Light Oak Block)

MSD001 351 Series – “O” Arm Only $364.00

MSD002 1431 Series – “O” Arm Only $364.00

MSD003 281 Series – “O” Arm Only $337.00

MSD004 1131 Series $364.00

GI-11

GENERAL INFORMATION

MERCHANDISING AIDS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Note: Sample mounts only. Hardware needs to be ordered separately.

Electronic Access Control Products

MSB003 10 Line – Keypad KP & KU $205.00

MSB004 10 Line – Harmony $225.00

MSB005 10 Line – Passport $200.00

MSB006 10G77 – Low Profile (Bored-in) $271.00

MSE002 59-80 Series Exit Device $310.00

MSE003 8800 Series Passport $310.00

MSE004 8900 Series Passport $360.00

MSE007 8876 – Low Profile (Rim Exit - LHR) $326.00

MSE008 HT-80 Series Exit $815.00

MSE009 8800 Series Harmony $337.00

MSE010 8900 Series Harmony $230.00

MSE011 8600 Series Harmony $230.00

MSE012 8700 Series Harmony $230.00

MSE013 KP 8900 Series Exit Device $310.00

MSE014 56- (Electric Latch Retraction) 80 Series Exit Device $569.00

MSE015 32" for 80 Series Rim $350.00

MSE016 36" for 80 Series Rim $370.00

MSE017 NB-8700 Series Harmony $230.00

MSE021 KP-8800 Series $265.00

MSM006 8200 Series - Passport $200.00

MSM007 KP 8200 Mortise Lock $286.00

MSM008 8200 Series – Low Profile (Mortise) $318.00

MSM009 H1 8200 Series $318.00

MSM016 H1/H2 R8200 Series $405.00

Aperio Hubs

MSA001 AH20 Aluminum $300.00

MSA003 AH30 Aluminum

Finish Samples

1111 Set of standard finishes on 11/4" diameter $56.00

SFP1 Sample Finish Plate $180.00

Lever Sample Kit

82-5365 Kit includes foam insert & bag only. Levers ordered separately $160.00

(US3, US4, US9, US10, US10B, US10BL, US14, US15, US20D, US26, US26D, US32, US32D, EB, ED, EN, EP, EAB)

GI-12

GENERAL INFORMATION

WEIGHT CHART

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Freight Weight Chart

Shipping weights listed depict an approximation of the average weight for any lock, exit device, or closer and are meant only for

use in estimating weight.

Standard Packing

Product Line

Locksets Function Case Quantity Average Weight Per Case (lbs.)

7800 Line 7805 w/trim 6 42

7900 Line 7904 w/trim 6 42

8200 Line 8205 w/trim 6 42

T-Zone (11 Line) 11G05 10 45

10 Line 10G05 10 45

7 Line 7G05 10 41

6 Line 6G05 10 21

6500 Line 65G05 10 41

Exit Devices

90 Series 9863 w/trim 1 15

80 Series 8863 w/trim 1 15

20 Series 2828F 19

Closers

351 Series UO 4 34

281 Series O224

1431 Series UO 4 32

1331 Series JUO 4 30

1131 Series RU 4 22

Overhead Holders & Stops

590/690 Series 16

1530/1540 Series 14

Screw Substitutions Price

Machine screw in place of wood screw No Extra Charge

Phillips head screws No Extra Charge

Spanner head in place of standard screws, specify WS or MS (37- option) See each product section for add

Six lobe security (Torx) screws (36- option) See each product section for add

82-3856 Spanner Bit Kit - (sizes 4, 6, 8, 10, 12 & 1/4"), (1/4" Driver) $116.22 Each

82-3855 Torx Bit Kit - (sizes T8, T9, T10, T15, T20, T25, & T27), (7/16" Driver) $155.00 Each

GI-13

GENERAL INFORMATION

MASTER OPTION LISTING

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Master Option List

Option Series Used Description

1 7L, 10L, 7800, 7900, 8200, 470 1-1/16" wide front for 1-3/8" doors

3 8200, 9200 Stainless Steel Hub

5P Cylinders for Conventional Key Systems Cylinders for Conventional Key Systems

9 2408, 2900 Companion units to 12-2400, 12-2900 Fire Guards

6, 7, 8X, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90,

9898, 470, 480, 4870, 758, 858, Keyswitch, KP10, 10ProfileSer., 10RF-Actuation,

KP8200, 8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation,

KP89, 89ProfileSer., 89RF-Actuation

SARGENT Signature Key System

6, 7, 8X, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888,

90, 9898, 9800, 470, 480, 4870, 758, 858, Keyswitch, KP10, 10L Profile Ser.,

10LRF-Actuation, KP8200, 8200ProfileSer., 8200RF-Actuation, KP88,

88 Profile Ser., 88RF-Actuation, KP89, 89 Profile Ser., 89RF-Actuation

SARGENT XC Key System

20, 30, 83, 85, MD84, MD86, WD86, LS-LP-LR-86, 87, NB87, 88, 8888, 89, 90, 980,

L980, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., UL Fire Label

89RF-Actuation, 5800, 7000, 2408, 2900, DL, RDL Fire Guard with Smoke Detector

12HC 8700 (all functions), 8800 (04, 10, 13, 15), 980 UL Fire Label/Hurricane Code

13 6, 470 Lockset x Front & Strike with 1/4" Radius

(2-3/8" Backset only)

1331, 1431, 268, 269, 278, 281, 351, 422 Door Closer Body Only

14 6500, 6, 7, DL Full Lip Strike #505

8700, 9700 Sliding Bolt Bottom Case

15 6, 470 Drive-In Guarded Latchbolt (2-3/8" Backset Only)

20, 30, 80, KP88, 88 Profile Ser., 88RF-Actuation, KP89, 89 Profile Ser.,

89RF-Actuation

Cylinder Lockdown Feature

480 400 "T" Shaped Strike (2-3/4" x 1-1/8")

17 6 Lockset x 2-3/4" Backset x 2-1/4" x 1" Front

19 80, KP88, 88 Profile Ser., 88RF-Actuation, KP89, 89 Profile Ser., 89RF-Actuation Pushbar without Lexan Touchpad

20 6500, 10, 480, DL 2-3/8" Backset

6, 7, 8X, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90,

9898, 470, 480, 4870, 758, 858, 4142, 4143, Keyswitch, KP10, 10 Profile Ser.,

10RF-Actuation, KP8200, 8200 Profile Ser., 8200RF-Actuation, KP88,

88 ProfileSer., 88RF-Actuation, KP89, 89 ProfileSer., 89RF-Actuation

SARGENT Lost Ball Construction Key System

6500, 6, 7, 8X, 10, T-Zone, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90,

9898, 480, 4870, 758, 858, Keyswitch, KP10, 10 Profile Ser., 10RF-Actuation,

KP8200, 8200 Profile Ser., 8200RF-Actuation, KP88, 88 Profile Ser.,

88RF-Actuation, KP89, 89 Profile Ser., 89RF-Actuation

SARGENT Split Key Construction Key System

(existing systems only)

10, T-Zone, KP10, 10ProfileSer., 10RF-Actuation 3-3/4" Backset

6 3-3/4" Backset x 2-1/4" x 1-1/8" Front

7800, 8200, 9200, 8300, 8900, KP8200, 8200ProfileSer., 8200RF-Actuation,

KP89, 89ProfileSer., 89RF-Actuation Flat 4-7/8" ANSI Strike

24 6 2-3/4" Backset x 2-1/4" x 1-1/8" Front

114, 115 2-3/4" Backset

25 10, T-Zone, KP10, 10ProfileSer., 10RF-Actuation 5" Backset

6 5" Backset x 2-1/4" x 1-1/8" Front

26 114, 115 7" Backset

6500, 6, 7, 8X, 10, T-Zone, DL, 114, 115, KP10, 10ProfileSer., 10RF-Actuation ANSI A-115.2.1971 Curved Lip Strike (#808)

470, 480 ANSI A-115.2.1971 Flat Lip Strike (#408)

4870 ANSI A-115.2.1971 Flat Lip Strike (#7710)

GI-14

GENERAL INFORMATION

MASTER OPTION LISTING

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Master Option List

Option Series Used Description

30 7, 10, T-Zone, KP10, 10ProfileSer., 10RF-Actuation Lever to accept Schlage Cylinder-Cylinder is not provided

31 8X, T-Zone, DL, 7800, 7900, 8200, 9200, 7000, 80, 90, 97, 98, 99,

Holders & Stops Special Thickness Doors (Specify door thickness)

36 Cylindrical, Mortise, Closers, 80, 97, 98, 99, Exits, Holders & Stops, Aux. Locks,

Deadlocks, 114, 115, 5100, 5800, 351EHT, 7000 6-Lobe Security Head Screws

37 Cylindrical, Mortise, Closers, 80, 97, 98, 99, Exits, Aux. Locks, Deadlocks,

114, 115, 5100, 5800, 7000 Spanner Head Screws

41 10, T-Zone, KP10, 10ProfileSer., 10RF-Actuation 3/4" Throw Latchbolt x 2-3/4" Backset

42 9700, 9800, 9900

43 80 Flush End Cap

47 Cylinders Special Cams

48 480 488 Strike 3-5/8" x 1-1/4"

49 7800, 8200 Visual Status Indicator/Occupancy Indicator

w/Emerg. Rlease

50 7800, 8200 Secured Indicator Rose

Cylinders Hotel Function (Lockout)

51 7800, 8200, 80, 97, 98, 99, 4870, 758, 858 Old Style Removable Core Cylinders for Existing

Systems only

52 7800, 8200, 80, 97, 98, 99, 4870, 758, 858 Old Style Removable Construction Core Cylinders

for Existing Systems only

53 83, 84, MD84, 85, MD86, WD86, 87, NB87, 88, 89 , 7000 Latchbolt Monitor Switch

54 83, 84, MD84, MD86, WD86, 87, NB87, 88, 89, 97, 98, 99, 7000 Internal Microswitch in ET Control

55 30, 80 Signal Switch in Rail

7000 Monitor Inside Lever

56 80 Remote Dogging/Latch Retraction

57 83, 84, MD84, 85, MD86, WD86, 87, NB87, 88, 89 Delayed Action (Magnet ordered separate)

58 80 Electric Dogging

59 83, 84, MD84, 85, MD86, WD86, 87, NB87, 88, 89 Electroguard

BC59 83, 84, MD84, 85, MD86, WD86, 87, 88, 89 Electroguard Boca Code (needs door status switch)

6, 7, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90, 9898,

480, 4870, 758, 858, Keyswitch, KP10, 10ProfileSer., 10RF-Actuation, KP8200,

8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89,

89ProfileSer., 89RF-Actuation

SARGENT Removable Disposable Construction

Core

6, 7, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90, 9898,

480, 4870, 758, 858, Keyswitch, KP10, 10ProfileSer., 10RF-Actuation, KP8200,

8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89,

89ProfileSer., 89RF-Actuation

SARGENT Removable Core Cylinder

6, 7, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90, 9898,

480, 4870, 758, 858, Keyswitch, KP10, 10ProfileSer., 10RF-Actuation, KP8200,

8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89,

89ProfileSer., 89RF-Actuation

SARGENT Removable Construction Core Cylinder

65 6300, 7300B Uncombinate Cores

6573

7, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90, 480, 4870,

KP10, 10ProfileSer., 10RF-Actuation, KP8200, 8200ProfileSer., 8200RF-Actuation,

KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

Small Format Interchangeable 6-Pin Uncombinate

Core

65737P

7, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90, 480, 4870,

KP10, 10ProfileSer., 10RF-Actuation, KP8200, 8200ProfileSer., 8200RF-Actuation,

KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer., 89RF-Actuation

Small Format Interchangeable 7-Pin Uncombinate

Core

GI-15

GENERAL INFORMATION

MASTER OPTION LISTING

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Master Option List

Option Series Used Description

68 7900, 8200, 9200 Lock furnished w/lever handle outside x knob inside

69 7900, 8200, 9200 Lock furnished w/lever handle inside x knob outside

7, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90,

480, 4870, KP10, 10 Profile Ser., 10RF-Actuation, KP8200, 8200 Profile Ser.,

8200RF-Actuation, KP88, 88 Profile Ser., 88RF-Actuation, KP89, 89 Profile Ser.,

89RF-Actuation

Small Format Interchangeable Disposable Plastic

Construction Core

7, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90,

480, 4870, KP10, 10 Profile Ser., 10RF-Actuation, KP8200, 8200 Profile Ser.,

8200RF-Actuation, KP88, 88 Profile Ser., 88RF-Actuation, KP89, 89 Profile Ser.,

89RF-Actuation

Small Format Interchangeable 6-Pin Construction Core

7, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 20, 30, 80, 8888, 90, 480, 4870, KP10,

10ProfileSer., 10RF-Actuation, KP8200, 8200 Profile Ser., 8200RF-Actuation, KP88,

88 Profile Ser., 88RF-Actuation, KP89, 89 Profile Ser., 89RF-Actuation

Small Format Interchangeable 6-Pin Core

737P

7, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 20, 30, 80, 8888, 90, 480, 4870, KP10,

10 Profile Ser., 10RF-Actuation, KP8200, 8200 Profile Ser., 8200RF-Actuation, KP88,

88 Profile Ser., 88RF-Actuation, KP89, 89 Profile Ser., 89RF-Actuation

Small Format Interchangeable 7-Pin Core

74 7, 10, 11, 7800, 8200, 4870, 114, 115 Lead Lining or Wrapping

7, 10, T-Zone, 7800, 7900, 8200, 9200, KP10, 10ProfileSer., 10RF-Actuation,

KP8200, 8200ProfileSer., 8200RF-Actuation Milled Inside Lever, Knurled Inside Knob

6500 Handicap Warning on Inside of Lever – Embossed

Plastic backing

94, 7000 Abrasive Strip on Rail

97, 98, 99 Knurled Crossbar

KP88 Tactile Warning

7, 10, T-Zone, 7800, 8200, 9200, KP10, 10ProfileSer., 10RF-Actuation, KP8200,

8200ProfileSer., 8200RF-Actuation Milled Outside Lever, Knurled Outside Knob

6500 Handicap Warning on Outside of Lever

– Embossed Plastic backing

7900, 7000, 80, 97, 98, 99, KP88, 88ProfileSer., 88RF-Actuation, KP89,

89ProfileSer., 89RF-Actuation Milled Outside Lever

7, 10, T-Zone, 7800, 7900, 8200, 9200, KP10, 10ProfileSer., 10RF-Actuation,

KP8200, 8200ProfileSer., 8200RF-Actuation Milled Both Levers, Knurled Both Levers

6500 Handicap Warning on Both Levers – Embossed

Plastic backing

7000 Abrasive Strip on Rail, Abrasive Coating on Lever

97, 98, 99 Knurled Crossbar, Abrasive Coating on Lever

78 Mortise Cylinder Exposed Barrel

2900 Adjustable Hold Open Switch

7L, 10L, T-Zone Levers/Knobs to accept Keso and KesoF1 cylinders -

no cylinders provided

7800, 7900, 8200, 7000, 80, 90, 9898, 4870, KP8200, 8200ProfileSer.,

8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer.,

89RF-Actuation

Cylinder to accept Keso(83) and KesoF1(F183)

removable core - no core provided

F182

7L, 10, T-Zone, 7800, 7900, 8200, 7000, 80, 90, 9898, 4870, 856/857 Padlocks,

Keyswitch, KP8200, 8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-

Actuation, KP89, 89ProfileSer., 89RF-Actuation

SARGENT KESO Security Cylinder - Patented -

NEW Key Systems

7L, 10, T-Zone, 7800, 7900, 8200, 7000, 80, 90, 9898, 4870, 856/857 Padlocks,

Keyswitch, KP8200, 8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-

Actuation, KP89, 89ProfileSer., 89RF-Actuation

SARGENT KESO Security Cylinder (Existing

Systems only)

F183

7800, 7900, 8200, 7000, 80, 90, 9898, 4870, KP8200, 8200ProfileSer.,

8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer.,

89RF-Actuation

SARGENT KESO Security Removable Core

Cylinder - Patented - NEW Key Systems

7800, 7900, 8200, 7000, 80, 90, 9898, 4870, KP8200, 8200ProfileSer., 8200RF-

Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer.,

89RF-Actuation

SARGENT KESO Security Removable Core

Cylinder (Existing Systems only)

GI-16

GENERAL INFORMATION

MASTER OPTION LISTING

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Master Option List

Option Series Used Description

7800, 7900, 8200, 7000, 80, 90, 9898, 4870, Padlocks, KP8200, 8200ProfileSer.,

8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer.,

89RF-Actuation

SARGENT KESO Security Removable Construction

Core Cylinder

85 11L, 10L, 7L, 6500, 8200, 7800, 7900, 9200, 7000 Tactile Warning - Abrasive Coating on Inside Lever

86 11L, 10L, 7L, 6500, 8200, 7800, 7900, 9200, 7000, 80, 90 Tactile Warning - Abrasive Coating on Outside Lever

87 11L, 10L, 7L, 6500, 8200, 7800, 7900, 9200, 7000, 80, 90 Tactile Warning - Abrasive Coating on Outside &

Inside Lever

91 5100, 5800, 10ProfileSer., 8200ProfileSer., 88ProfileSer., 89ProfileSer. Remote Power

92 5100, 5800 Remote Monitoring

93 5100, 5800 Continuous Alarm

94 5100, 5800 Automatic Re-Arm

ABC 281 Advanced Backcheck

AL 83, 84, MD84, 85, MD86, WD86, 87, NB87, SP-PP-PR87, 88, 89 Alarmed (not available with 56 thru 59 options)

AV 7800, 8200, 9200 Anti-Vandal Pull Trim

BC 80 Series Exit Devices Boca Code

BP 7800, 8200 Distributor Bulk Pack Program - Lockbodies

6, 7, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90, 9898,

9800, 980 Mullions, 470, 480, 4870, 5100, 5800, KP10, ProfileSer., 10LRF-Actuation,

KP8200, 8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation,

KP89, 89ProfileSer., 89RF-Actuation

SARGENT Bump Resistant Cylinder

C- 1131 Cover

CL 4000Ser. Low Ceiling

CPC 7000, 281, 351, 422, 1431, 590, 690, 8300, 8400, 8500, 8600, 8700, 8800, 8900,

9700, 9800, 9900 Clear Powder Coat over 26D/32D

DA 278, 281, 351, 1431, 268, 269, 351EHT Delayed Action

DG1 6, 7, 8X, 10, T-Zone, 6500, 7800, 7900, 8200, 9200, 7000, 20, 30, 80, 8888, 90, SARGENT DEGREE Key System

DG2 9898, 480, 4870, 758, 858, Keyswitch, KP10, 10ProfileSer., 10RF-Actuation, SARGENT DEGREE Key System

DG3 KP8200, 8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation,

KP89, 89ProfileSer., 89RF-Actuation SARGENT DEGREE Key System

DM 10LProfile(G1), 8200 Profile(G1), 80Series Profile(G1) Forced/Propped Door Harness

DX 7800, 8200 Deadbolt Monitoring

EC 281, 1331 series Environmentally friendly ABS plastic cover

F1 KESO Cylinders/Keys Patented Keso Key System

FM 8700 (E, F Rail only) 2Pt. Latching, Complies with FEMA 361

FW 7, 10 Freewheeling

G1 10LProfileSer., 10LRF-Actuation, 8200ProfileSer., 8200RF-Actuation,

88/89ProfileSer., 88/89RF-Actuation, v.G1 Next Generation software

GL 8500, 8800, 8888 Guarded Latch

HC 8700 (all functions), 8800 (not available with 04, 10, 13, 15), 980 Hurricane Code

HC4 8700 Series Hurricane Resistant

IDP Harmony Series 8200 Integrated Door Position Switch

IS 7800, 8200, 9200 Inside Working Trim Sets

LB 7900, 8200, 4870 ADA Extra Large Thumbturn

LC Less Cylinder All products w/cylinders Less Cylinder

LD 80 series exits Less Dogging

LX 8200 Latchbolt Monitor

M- 9200

MC 351, 281, 1431, 422, 351EHT Closer with Metal Cover

NB 7000, 8400, 12-MD8400, MD8600, WD8600, 8700, 306, 313 Aux Controls No Bottom Rod

OBS 8200, 7800, 9200 Open Back Strike

OS 7800, 8200, 9200 Outside Working Trim Sets

GI-17

GENERAL INFORMATION

PARTNER SERVICES

GENERAL INFORMATION

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Master Option List

Option Series Used Description

P- 114, 115, HP series Engraved Paddles “Push” and “Pull”

PL 80 Series SARGuide™ Photoluminescent Coating

RX 10, 7900, 8200 Request to exit or enter switch

6, 6500, 7, 10, T-Zone, 7800, 7900, 8200, 7000, 20, 30, 80, 8888, 90, 470, 480,

4870, 758, 858, KP10, 10ProfileSer., 10RF-Actuation, KP8200, 8200ProfileSer.,

8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer.,

89RF-Actuation

Schlage "C" Keyway Cylinder - "0" Bitted

6, 6500, 7, 10, T-Zone, 7800, 7900, 8200, 7000, 20, 30, 80, 8888, 90, 470,

480, 4870, 758, KP10, 10ProfileSer., 10RF-Actuation, KP8200,8200ProfileSer.,

8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89, 89ProfileSer.,

89RF-Actuation

Schlage "E" Keyway Cylinder - "0" Bitted

SF 7L, 10L, 11L

L Lever to accept Schlage Large Format

Interchangeable Core (supplied less core,

tailpiece included)

6, 7, 9,10, T-Zone, 7800, 8200, 9200, 1431, 281, 422, 351, 80, 90, O/H Holders &

Stops, 4870, 114/115, KP10, 10ProfileSer., 10RF-Actuation, KP8200,

8200ProfileSer., 8200RF-Actuation, KP88, 88ProfileSer., 88RF-Actuation, KP89,

89ProfileSer., 89RF-Actuation

MicroShield®- an antimicrobial powdercoat finish

SL T-Zone High Security Lever Attachment

SRI 351, 281, 1431, 268, 278, 269, 422 Additional Special Rust Inhibitor (SRI)

T1 7900, 8200, R8200 Decorative thumburn; backplate matches rose

design chosen

T2 7900, 8200, R8200 Decorative square thumburn; backplate matches

rose design chosen

T3 7900, 8200, R8200 Decorative cylinder thumburn; backplate matches

rose design chosen

7000, 351, 281, 1431, 278, 422, 1331, 1131, 2727, 2828, 3727, 3828, 8300,

8600, 8500, 8700, 8800, 8900, 9400, 9700, 9800, 9900, 114, 115, 5800,

351EHT, 2408, 2900

Thru Bolt

TL 80 SARGuide™ - Illuminated Touchpad

8200 x WT(escutcheon) SARGuide™ - Illuminated WT Escutcheon

TR 7800, 8200 Distributor Bulk Pack Program - Complete Trim Packs

WBS 11L, 10L, 7L, DL, 6L, 8200, 7800, 7900, 9200 Wrought Box Strike

WS 8500, 8800, & 8900 Series Windstorm Certified

YC 11L L or P Lever to accept Yale®6-pin fixed core cylinder

YC7P 11L L or P Lever to accept Yale®7-pin fixed core cylinder

YRC 11L L or P Lever to accept Yale®6-pin LFIC

YRC7P 11L L or P Lever to accept Yale®7-pin LIFC

GI-18

GENERAL INFORMATION

PARTNER SERVICES

GENERAL INFORMATION

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Business Hours: The Partner Services Team (except Customer Service)

is available: 8:00 AM to 4:30 PM Eastern Standard Time.

Customer Service Hours: 8:00 AM to 6:00 PM ( Monday – Thursday)

8:00 AM to 4:30 PM (Friday)

Toll Free Telephone Number: 1-800-727-5477

Order Fax Number: 1- 800-906-6606. Order email: usnew.orderentry@assaabloy.com

Contact Phone Numbers: Included is a list of Who’s Who for the Partner Services Team. This

list includes Team Member’s direct extensions and email addresses.

2018 Calendar:

• January 1 (New Years)

• January 15 (Martin Luther King Day)

• February 19 (President’s Day)

• March 30 (Good Friday)

• May 28 (Memorial Day)

• July 4 (4th of July)

• September 3 (Labor Day)

• November 22 and 23 (Thanksgiving)

• December 24, 25 and 26 (Christmas

SARGENT Website: We offer a full service website www.sargentlock.com. The Partner Services

page of the SARGENT website includes templates, instruction sheets, configurable cut sheets,

wiring diagrams and our latest product developments. All product information catalogs are also

available on this website.

RGA Policy: Please refer to GI-4 of the General Information Section.

PARTNER SERVICES IN THE UNITED STATES

GI-19

GENERAL INFORMATION

WHO’S WHO AT SARGENT

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

CUSTOMER SUPPORT SERVICES

(Order Processing, Customer Service, Keying)

Telephone: 800-727-5477

Manager Customer Relations & Support Services

Lynn Higgins 1-5948 Lynn.Higgins@assaabloy.com

Manager, Keying, Order Entry & EBusiness

Bethany Cordeiro 1-4271 Bethany.Cordeiro@assaabloy.com

Manager, Customer Services

Susanna Bria 1-5584 Susanna.Bria@assaabloy.com

Order Processing – Edit/Enter Orders

Fax Orders To: 800-906-6606

Email standard orders to: orders.sargent@assaabloy.com

Email turbo orders to: turboorders.sargent@assaabloy.com

Customer Service – Expedites, Returns,

Change Orders, Line Suspensions

Fax: 888-863-5054

Telephone: 800-727-5477

For Customer / Technical Support Services in Canada

Please see page GI-6

GI-20

GENERAL INFORMATION

WHO’S WHO AT SARGENT

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Customer Service Team Members

Expedites, Returns, Change Orders, Line Suspensions

Customer Service’s Fax: 888-863-5054 • Telephone: 800-727-5477

Manager of Customer Service

Susanna Bria 1-5584 Susanna.Bria@assaabloy.com

Customer Support Specialists

(Returns, Expedites, Product Questions,Changes,Suspensions)

Western Region 2, 4 (Southeast & Western)

Luci Muzyk: (A15, A37, A38, A39, & GA Only) 1-6852 Luci.Muzyk@assaabloy.com

Northeast Regions 1

Monique Delgado: (A02, A03) & OEM Customers 1-5713 Monique.Delgado@assaabloy.com

Central Region 3, 4

Shirley Sotaski: (A27, A28, A43) 1-5715 Shirley.Sotaski@assaabloy.com

Western Region 4 (South)

Cheta Cusson: HI, Arrow 1-5906 Cheta.Cusson@assaabloy.com

Western Region 4

Donna McQuarrie: (A01, A44, SC) 1-5595 Donna.McQuarrie@assaabloy.com

NE & Midwest Atlantic Region 1

Cheta Cusson: (A07 & A08) 1-5906 Cheta.Cusson@assaabloy.com

Northern Region 1, Central Region 3, Southeast Region 2

TBD: (A16, A31, A32) & NC only 1-5759

Central Region 3

Joann Sierejko: (A21, A22) 1-5755 Joann.Sierejko@assaabloy.com

International Companies

Luci Muzyk 1-6852 Luci.Muzyk@assaabloy.com

Customer Exceptions:

Joann Sierejko: All Akron, MidWest Wholesale

Shirley Sotaski: Builders Hardware & Doors Inc. DesMoines/Cedar Rapids

Cheta Cusson: Himmels Hardware & Island Pacific, Doors Inc. Ft Dodge

TBD: Dugmore & Duncan, Doors Inc. Swaledale/Iowa City

Donna McQuarrie, DH Pace

Luci Muzyk: Doors Inc. Waterloo/Davenport

Telephone: 800-727-5477 • Fax Orders To: 800-906-6606

GI-21

GENERAL INFORMATION

WHO’S WHO AT SARGENT

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Telephone: 800-727-5477 • Fax Orders To: 800-906-6606

KEY SYSTEMS TEAM

Master Key System’s Support Fax: 888-898-8995

KEY DESIGN TEAM

Birute Gelazauskiene – (Signature) 1-5786 Birute.Gelazauskiene@assaabloy.com

Lijana Mursko – (Conventional, Keso, Non, 24-Hour) 1-5558 Lijana.Mursko@assaabloy.com

Romas Sakalauskas – (KESO) 1-5625 Romas.Sakalauskas@assaabloy.com

Saulius Jovaisa – (Conventional, SFIC) 1-5722 Saulius.Jovaisa@assaabloy.com

Aurela Dautaj – (Canada Orders, Bitting Lists) 1-5746 Aurela.Dautaj@assaabloy.com

Saulius Pleseckis – Key Edit 1-5767 Saulius.Pleseckis@assaabloy.com

MARKETING

Director of Marketing Communications

Beth Welch 1-4263 Beth.Welch@assaabloy.com

Marketing Communications Manager – Electronic Access Control

Rebecca Samuel 1-4225 rebecca.samuel@assaabloy.com

Product Marketing Manager – Decorative Hardware

Emily Charles 1-5682 Emily.Charles@assaabloy.com

Marketing Communications Specialist – Mechanical Products

Amy Esposito 1-5608 Amy.Esposito@assaabloy.com

BRAND PROMOTIONS

Director of Business Development

Dave Higginson 1-7216 Dave.Higginson@assaabloy.com

GI-22

GENERAL INFORMATION

WHO’S WHO AT SARGENT

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Telephone: 800-727-5477 • Fax Orders To: 800-906-6606

SALES SUPPORT SERVICES TEAM

Fax: 203-821-5729

Director of Strategic Pricing

Woody Sharp 1-5606 Woody.Sharp@assaabloy.com

Larisa Chavenello 1-3396 Larisa.Chavenello@assaabloy.com

Rich Hodder 1-5583 Richard.Hodder@assaabloy.com

Janice Shanley 1-6823 Janice.Shanley@assaabloy.com

Mamadou Hane 1-3333 Mamadou.Hane@assaabloy.com

Christine Le 1-5721 Christine.Le@assaabloy.com

TECHNICAL SUPPORT TEAM (Electronics)

Electro-mechanical and Electronic Access Control Products

Direct: 800-810-9473 • Fax: 203-603-5981

Email: support.sargent@assaabloy.com

Manager, Applications Engineering & Product Support

Dom Cottone 1-3337 dom.cottone@assaabloy.com

EM Technical Support Team Leader

Gary Jacques 1-5920 Gary.Jacques@assaabloy.com

EM Technicians (EAC Products)

Tom Gorcyca

Christian Laursen

Nadia Morales 800-810-9473 support.sargent@assaabloy.com

Stephanie Jorge-Reyes

Greg Stevens

Andrew Yoo

TECHNICAL SUPPORT TEAM (Mechanical)

Mechanical Products 800-727-5477, Option 4

Email: support@sargentlock.com

Exit Device Specialist FAX: 203-821-5782

Main Contact: Gloria Dennis Press 4 Gloria.Dennis@assaabloy.com

Back Up: Adam Sigovitch Press 4 Adam.Sigovitch@assaabloy.com

Mortise Lock Specialist FAX: 203-498-5567

Main Contact: Paul Lichack Press 3 Paul.Lichack@assaabloy.com

Main Contact: Tino Bowden Press 3 tino.bowden@assaabloy.com

Cylinders Specialist FAX: 203-603-5921

Main Contact: Rob Shanley Press 5 Robert.Shanley@assaabloy.com

Back Up: Paul Lichack Press 5 Paul.Lichack @assaabloy.com

Door Closer Specialist FAX: 704-233-1582

Main Contact: Mike Strickland Press 7 mike.strickland@assaabloy.com

Back Up: Sean Medlin Press 7 smedlin@nortondoorcontrols.com

Bored Lock Specialist FAX: 203-821-5768

Main Contact: Adam Sigovitch Press 2 Adam.Sigovitch@assaabloy.com

Back Up: Rob Shanley Press 2 Robert.Shanley@assaabloy.com

GI-23

GENERAL INFORMATION

ORDERING, MASTERKEY SERVICE FEE POLICY

& SARGENT KEY SYSTEMS SECURITY POLICY

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Order Types:

• Please submit TURBOSHIP orders,Standard lead time(contract) orders, SPECIAL product orders

on separate order forms (Pages GI-27 – GI-30).

• Please use TURBOSHIP order forms for all TURBOSHIP orders. If you use your own purchase order

forms, please supply the information in the proper SARGENT nomenclature, for your order to be

processed without delay. Only products listed in the current TURBOSHIP brochure are available for TUR-

BOSHIP. Products ordered that are not listed in the current TURBOSHIP brochure will automatically be

entered at standard factory production lead times.

• Standard Order Forms are included in the 2018 Price Book and at www.sargentlock.com

(Pages GI-27 – GI-30).

• TURBO SHIP ORDER FORMS are available on our website at www.sargentlock.com/turboship.html

• We recommend using Order Forms included with this Price Book when placing purchase orders for

SARGENT products. The Order Form is available for copying prior to placing your order.

Orders with Quotes:

• If you have a Quote, please include a copy with the purchase order or reference the Quote number on

PAGE 1 of your order. Orders without this information may be delayed or may be subject to a $100.00

price correction fee if invoiced incorrectly due to this missing information

• If you have a Quote, please check the expiration date. If the Quote is expired, please contact your

DSS Sales rep. to find out how your quote can be re-instated. Orders received with expired Quotes may

be delayed.

• If you have a Quote, please check products listed and packaging on the quote. Orders which do not

match the products listed on your Quote or do not include all products listed on the Quote and do not

have packaging (sister company order) information, may be delayed.

Masterkey Service Fee:

The value-added service of a customized masterkey security solution is provided when requested for a nominal

charge with the purchase of complete SARGENT keyed locking devices. In addition to the standard masterkeying

charge, a masterkey service charge will be assessed, based on quantity, cylinder type, key system type, for an

order that includes only SARGENT cylinders or cores for use in non-SARGENT manufactured locking devices

for which SARGENT has an equivalent.

SARGENT Key Systems Security Policy:

The purpose of this security policy is to enforce our policies concerning high security, security and restricted

keyway product, as well as master key system information. No master key system information or security

related product is to be given or sold to anyone other than the facility owner through written correspondence.

Verification must be submitted (fax copy will be acceptable) to SARGENT Key Records. The verification

must be on the facility’s letterhead and signed by a facility authorized systems administrator. SARGENT

Key Records does not maintain “Letters of Authorization” on file. Each order must be accompanied by

proper authorization. Only after the authorization has been verified will the order be processed for production.

This security policy refers to the following:

• Signature systems • Protected keyway systems • Security cylinder systems

GI-24

GENERAL INFORMATION

ORDERING TIPS & KEYING

– AUTHORIZATION DOCUMENTATION:

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Also includes:

• Bitting information (even one bitting, absolutely no top-level master keys)

• Bitting lists (all formats; i.e., hard copy, disc)

• Key blanks and systems components

Please note:

• No orders are to be processed through SARGENT Key Records without proper authorization.

• Only orders with appropriate authorization attached will be given priority.

• Requests for systems information without proper authorization from the owner will be denied.

• Requests for information regarding the purchase of any systems support products as listed above will be

referred to the local authorized sales agency.

• Refer to the current price lists for additional policies and procedures as they relate to this security policy.

Remember:

The purpose for the establishment of any security system is to provide an increased level of protection for the

Facility owner.

Keying - Authorization Documentation:

When submitting purchase orders to SARGENT for processing, please remember that certain cylinder types

and/or keyways require additional authorization documentation before the order can be entered.

Purchase orders will be held and questioned if the following keyway/cylinder types do not have the proper

authorization documentation submitted with each purchase order or shipment of the following items will be

made directly to the end user or their designated agent:

• All Restricted Keyway Cut Keys or Key Blanks;

• All Signature Cut Keys or Key Blanks;

• All XC Restricted Cut Keys or Key Blanks;

• All dimpled KESO keys;

• All computer disks (CD or Floppy) for the Key Wizard Control Software and

• All key system bitting information in either paper or electronic form

Exceptions:

• Standard key blanks and cut keys for the “C”, “H”, “L” and “R” keyway families

• XC key blanks and cut keys for any non-restricted keyway family

Any order or fax request received at SARGENT for any of the above products or information must specify

the shipping address of that product or information as the end user of the product or information. If the

product is to be shipped to the end user’s authorized agent, a letter authorizing that shipment to an address

different than that of the end user must be on file at SARGENT or attached to the order.

If you have any questions regarding authorization, please do not hesitate to contact us or your

local representative.

GI-25

GENERAL INFORMATION

ORDERING TIPS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Purchase Order Format

For Comsense and Protech users please use the Purchase Order Supporting (Detail)

Schedule to place contract orders, NOT the Door Index or Keying Index. Only the Purchase

Order Supporting Schedule contains all of the information required, (options, item quantities) to

properly furnish you materials.

For all other formats we ask that product of like nature be grouped together with the item quantities,

Door Numbers, and keysets listed underneath or with the product. This will allow faster processing

of your order.

Ordering Checklist:

Before placing your order, check for the following:

✓Purchase order on company letterhead

✓Purchase order is legible

✓Purchase Order Number

✓Account Number

✓Ship To Address

✓Contact Person for additional information requirements

✓Pricing requirements – Buying Program or Quote

✓TURBOSHIP order - TURBOSHIP order form OR clearly mark on your order form

✓Contract Order (Keyed Lead Sheets attached)

✓Authorization Letter OR Pin # (if applicable)

✓Registry Number if Existing Key System or previous SARGENT order number

✓Job Name

✓Quantity

✓Catalog Function

✓Options (if applicable)

✓Trim/Arm

✓Finish (if applicable)

✓Handing (if applicable)

✓Backset & Strike (if applicable)

✓Door thickness (if applicable)

✓Door width & height – Exit Devices

✓Voltage (if applicable)

✓Keysets (if applicable)

✓Door numbers (if applicable)

GI-26

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

SARGENT Order Lead Sheet Check List

GI-27

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

GI-28

GI-29

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

GI-30

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

GI-31

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

GI-32

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

GI-33

SARGENT Signature Series

Code Pattern Registration Form

100 Sargent Drive New Haven, CT 06511 Phone 800-727-5477 Fax 888-898-8995

Section A Distributor Information (1) Date:

(2) Distributor Name: (3) Account Number:

(4) City: (5) State: (6) Zip Code:

(7) Contact Name:

(8) Phone: (9) Fax:

Section B Facility Information:

(10) Facility Name:

(11) Building Name:

(12) Address:

(13) City: (14) State: (15) Zip Code:

(16) Area Responsible for Key System:

And Names Title:

Of Authorizing

Indifiduals Title:

Mailing Address: City: State: Zip:

Phone: Fax:

Section C: System Specifications:

Existing System New System Cylinder Quantity:

Existing Registry Number: Requested Keyway:

System Level: Construction Keying Removable Core Hotel Mky

Section C: Area of Exclusivity:

State Adjacent States Additional States:

Final Approval and Assignment by SARGENT

______________________________________________________________________________________

Factory Use Only:

Keyway Family: ________

Signature Code___________________ PIN Code___________________________ Zip:______________

Alternate Code___________________

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

GI-34

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

GI-35

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

GI-36

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

GI-37

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Price Book No. 31 | May 1, 2018

GI-38

GI-39

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

GI-40

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Degree DG1 Required Administrative Documents:

- Mandatory; all new systems will require a completed System Information Document

(orders can not be entered without this document). The fully executed original document

will be kept on file at Sargent Manufacturing.

- Subsequent order requirement. A letter of authorization will be required if the product is

shipped to an address other than what’s recorded on the System Administration

Document, and/or if the address on the purchase order is different than what is listed on

the System Information Document.

Degree DG2 & DG3 Required Administrative Documents:

- Mandatory; all new systems will require a completed System Information Document

(orders can not be entered without this document). The fully executed original document

will be kept on file at Sargent Manufacturing.

- Subsequent order requirement: A specific randomized security code will be required for

each order unless “Opt-Out” has been authorized by the systems administrator.

- If the “Opt Out” option is NOT selected

• A correct system specific (randomized) security code must be included with

each subsequent order.

• Security codes are specific to each order.

• If the shipping address is other than the one listed on the System Information

Document, a Letter of Authorization signed by one of the recorded authorized

representatives of the facility is required.

• Letter of Authorization must contain the same shipping address that appears

on the customer’s Purchase Order.

• Letters of Authorization will not be kept on file at factory.

• Without the proper security code, Letter of Authorization, or if the shipping address

is other then what’s listed on the System Information Document, the order cannot

be processed.

- If the System Administrator elects not to use security codes as part of the authorization

process, the “Opt Out” option can be authorized by the system administrator.

• If the “Opt Out” option IS selected

• A system-specific security code is not required.

• Letter of Authorization must be signed by one of the facility’s authorized

representatives. If the shipping address is other then the one listed on the

System Information Document, a Letter of Authorization will be required.

• Letter of Authorization must contain the same shipping address that appears

on the customer’s Purchase Order.

• Letters of Authorization will not be kept on file at factory.

CYLINDERS & KEYING

TABLE OF CONTENTS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

CYLINDERS AND KEYING

How to Order/Key Control System Types.................................CK-1

Key Control System Types/ Old Style/LFIC/SFIC

Temporary Construction Cores ................................................CK-2

Keying Charges........................................................................CK-3

Key Charts/Key Wizard Software .............................................CK-4

Mortise & Rim Cylinders ..........................................................CK-5

Cylinders & Accessories ..........................................................CK-6

Bored Lock Cylinder & Parts....................................................CK-7

XC Series .................................................................................CK-8

XC Series .................................................................................CK-9

SARGENT Large Format Interchangeable Core Cylinders

& Old Style Removable Core Cylinders .................................CK-10

SARGENT XC - Large Format

Interchangeable Core Cylinders.............................................CK-11

Small Format Interchangeable Core ......................................CK-12

XC - Small Format Interchangeable Core..............................CK-13

Keying Kits, Tools, Gauges, Components ..............................CK-14

Keyblanks ...............................................................................CK-15

Keyblanks ...............................................................................CK-16

SARGENT Cut Keys/Competitor Keyways.............................CK-17

KESO F1 Security System Options .......................................CK-18

KESO F1 Security System Cylinders.....................................CK-19

KESO F1 Security System Cylinders/Padlocks .....................CK-20

KESO F1 Security System UL LIsted

Cylinders/Cam/Padlocks ........................................................CK-21

KESO F1 Security System Cylinders Guarantee...................CK-22

KESO Security System Options.............................................CK-23

KESO Security System Cylinders ..........................................CK-24

KESO Security System Cylinders/Padlocks...........................CK-25

KESO Security System UL Listed

Cylinders/Cams/Padlocks.......................................................CK-26

KESO Security Systems Cylinders Guarantee ......................CK-27

Signature Series Cylinders & Keying .....................................CK-28

Signature Series Removable Core.........................................CK-29

Signature Series Mortise & Rim Cylinders ............................CK-30

Signature Series Bored Lock Cylinders & Parts ....................CK-31

Degree Keying Chares ...........................................................CK-32

Degree DG1 Cylinders...........................................................CK-33

Degree DG1 LFIC and DG2 Cylinders ..................................CK-34

Degree DG2 Cylinders and LFIC Cylinders...........................CK-35

Degree DG3 Clinders.............................................................CK-36

Degree DG3 LFIC Cylinders ..................................................CK-37

Degree DG3 Degree Pins and Parts .....................................CK-38

CK-1

CYLINDERS & KEYING

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

How to Order

Step Description Example

Quantity Each 1 Ea

Option Consult catalog for options available 1 Ea. 63-

Product Series Consult catalog for applicable product 1 Ea. 63-8205 LNL

Finish Consult catalog for finishes available 1 Ea. 63-8205 LNL US26D

Keying DHI keying nomenclature 1 Ea. 63-8205 LNL US26D AA1

To establish a new factory master key system or to add to an existing factory master key system please use the

NEW ORDERING INFORMATION LEAD SHEET.

For all master keyed systems of a level 5 or above, please consult factory before ordering for information on how to order.

Key Control System Types

Type Description Option

Stock Keyway (LA) LA keyway will be provided on non-masterkeyed order if no keyway is provided. -

Standard Keyways in general use for key systems. -

Restricted Keyways tightly controlled by the factory, letter of authorization required from -

(Not Published) end user for keys & cylinders, and prior approval from the SARGENT Security

Systems Manager before establishing a new system.

Large Format IC Core System allows for increased security through quick changing of cylinder into 63

(R Series Standard- reserve or into another lock. System can be used with mortise locks, bored locks, 64 Construction Core

for New Systems) auxiliary deadlocks, padlocks and exit devices.

Small Format System allows for increased security through quick changing of core into cylinder 72 Construction

Interchangeable housing or into another lock. System can be used with mortise locks, bored locks, 73 (6-Pin)

Core auxiliary locks, and exit devices. Available in SARGENT 4A & 4B keyway family & 73-7P (7-Pin)

existing competitor keyway families.

XC Patented product that cannot be copied and supplied by others. Provides an intermediate 11

level of control by ensuring that the keyblanks are not readily available in the market.Offered

in many of SARGENT's standard keyways and is readily integrated as a costeffective means

of achieving higher security key control in an existing key system. Available inSARGENT

standard or 7 Pin Small Format (4A and restricted keyway 4B) Interchangeable Core cylinders

and Sargent Large Format Interchangeable Core.

Signature Signature codes tightly controlled by the factory. Pin # or explicit letter of 10

authorization required from the end user for keys & cylinders. New code

assignments require form H759 “Code Pattern Registration Form” to establish

Signature Code and keyway assignments. Available with construction keying

and removable core options (as additions). When Signature and Standard keys

are used on the same system, miscellaneous charges and substitution prices

that apply to Signature will apply to Standard.

KESO KESO codes tightly controlled by the factory. End users signature required for keys 82

& cylinders. Please contact factory for approval BEFORE establishing any new 83 Removable Core

KESO system. All keying and key cutting performed in a factory secure area. 84 Construction Core

KESO F1 KESO F1 Series of cylinders incorporates the same time proven KESO product line F1-82

and includes advanced Patented features. These features to both cylinder and F1-83 Rem. Core

key are designed to be used in new Patented cylinders and are compatible 84 Construction Core

with existing KESO key systems. KESO F1 codes tightly controlled by the factory.

End users signature required for keys & cylinders. All keying and key cutting

performed in a factory secure area.

Bump Resistant Patent Pending bump resistant cylinders. These cylinders employ especially engineered BR

patent pending pinning components designed to resist bumping while maintaining the

cylinder's strength. Not available with 10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC,

SE options.

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

CK-2

CYLINDER & KEYING

OLD STYLE REMOVABLE TEMPORARY CONSTRUCTION CORES Price/Brass Core

(52-) $75.00

Number Description Price

252CMK Old Style Temporary Construction Master Key - 5 pin (52-)

252CTL Old Style Temporary Construction Control Key - 5 pin (52-) $9.00

6252CMK Old Style Temporary Construction Master Key - 6 pin (52-)

6252CTL Old Style Temporary Construction Control Key - 6 pin (52-)

LFIC/SFIC TEMPORARY CONSTRUCTION CORE Price/Brass Core

(64-, 1164-, DG1, 2, 3, 64-) $74.00

(72- and 11-72-) $66.00

HOW TO RETURN ABOVE CONSTRUCTION CORE

The full invoice must be paid according to SARGENT’s standard terms. The brass construction cores, 6-construction day keys, and 1-control

key will be packed together and will ship with the order, unless otherwise specified

Contact your Customer Service Representative for a Returned Goods Authorization. Provide the factory order number and year of the original

order. Credit is issued for all cores returned in good operating condition at the time of the original order. Applicable discounts to the original

unit are applied to the returned core.

Number Description Price

6251CMK Temporary Construction Removable Core Master Key - 6 pin used with 64-, 11-64-, DG1-64, DG2-64, and DG3-64

6251CTL Temporary Construction Removable Core Control Key - 6 pin used with 64-, 11-64-, DG1-64, DG2-64, and DG3-64

6282BCMK Construction Interchangeable Core Master Key - 6 pin used with 72- $9.00

6254BCTL Construction Interchangeable Core Control Key - 6 pin used with 72-

7282BCMK Construction Interchangeable Core Master Key - 7 pin used with 11-72-

7254BCTL Construction Interchangeable Core Control Key - 7 pin used with 11-72-

Key Control System Types

Type Description Option

Degree DG1 Patented Key Control features a utility patented keyway and is constructed to provide DG1 DG1

protection against bumping for mortise, rim and component fixed cylinders. These cylinders

easily retrofit into existing hardware.

Degree DG2 Patented Key Control Integrated with Security Protection combines a utility patented keyway DG2

and patented side bar locking with unique angled bottom pins that provide end users with

geographical exclusivity. Cylinders are constructed to provide protection against bumping and

picking. Because of its superior key control, patent protection until 2027, and physical strength,

we recommend SARGENT DG2 products to be used in conjunction with the DG3 for new

installations or when retrofitting systems, including large format interchangeable core systems.

Degree DG3 High Security with Patented Key Control is our premier brand technology. Degree DG3 DG3

combines a utility patented keyway and side bar locking with unique angled bottom pins that

provide end users with geographical exclusivity. These cylinders have earned a UL437 Listing,

the ANSI/BHMA A156.5 Grade 1 certification, and are classified as high security because of

their superior resistance to physical attack and protection against unauthorized key duplication.

Because of its superior key control, patent protection until 2027, and physical strength, we

recommend SARGENT DG3 products for new installations or when retrofitting systems,

including large format interchangeable core systems.

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

CK-3

CYLINDERS & KEYING

KEYING CHARGES

Keying Charges & Substitutions Price

Masterkey Service Fee (applies to cylinders not being installed in ASSA ABLOY products) Consult Factory

*Masterkeying or Higher level of keying, any quantity

Masterkeying or Higher level of keying, any quantity, cylinders only Add $16.00 /cyl.

*Construction Masterkeying with lockset or exit devices (21-, 22-)

Construction Masterkeying with cylinders only (21-, 22-)

Extra Keys (Cylinders are packed standard with 2 change keys each)

For each extra key ordered with locksets, exit devices or cylinders $5.00 /key

For keys packed separately (Indicate appropriate "ship to" address on keying cover sheet) Add $4.00 /cyl.

Key Marking

“Do Not Duplicate” or other stamps on file at SARGENT No Addition

Where new special stamp is required e.g., “State of Alaska - Do Not Duplicate” Extra lead time required Add $840.00 /die

Keys stamped from this special die on first only Add $4.00 /key

Visual Key Control

Stamping of bitting numbers on Change/Day keys standard N/C

Stamping of keyset number and file number on Master keys standard N/C

Stamping of cylinder plug and/or two keys with industry standard alpha numeric keyset symbol Add $8.00 /cyl.

Each additional key $1.00 /key

Concealed stamping code (Keyset Symbol) on bored, mortise or rim cylinder slide Add $8.00 /cyl.

Concealed stamping of 6300/10-6300 and old style Cores slide Add $8.00 /cyl

Note: Not available with and XC plugs/bodies or signature plugs

Delete SARGENT Logo or delete bitting or key set cylinder and or keys (Consult factory for additional cost and leadtime)

*To delete keyway from key per keyway $4.00 / key

**To delete logo from cylinder or key - Specify which or both $4.00 /cyl. or key

To delete bitting and key set from keys $4.00 per key plus set up charge

*Set-up charge to delete keyway from key per keyway per order $103.00

**Set-up charge to delete logo from cylinder or key $103.00

Note: Not available with SFIC, XC, KESO, & Degree

All orders will continue to be handled as a “special” when ordered. Discounts do not apply.

SARGENT Restricted Keyway Family (A, B, G, K, N, V) 6 Pin, (4B) Small Format Interchangeable Core 7Pin

Locksets, cylinders and cores with restricted sections Add $7.00 /cyl.

Cylinder barrels for restricted keyways Add $7.00 /bar.

NOTES: All orders for restricted keyblanks, barrels, or product containing cylinders that have a restricted keyway must

include a letter of authorization or a copy of purchase order from the end user. Prior authorization from

SARGENT key systems is required before establishing a new key system that requires a restricted keyway.

Contact SARGENT key records to determine size of bitting list.

U&R keyways available 1 bitted.

Two (2) cut change keys are provided per lockset or cylinder at no charge. Keyblanks cannot be substituted for cut keys.

Double cylinder lockset when keyed alike on both sides receives 2 keys per lock.

Note: The below applies to Standard Key Systems.

For XC Series refer to CK-8 .

For Large Format Interchangeable Core refer to CK-12

For Large Format XC Interchangeable Core refer to CK-13

For Small Format Interchangeable Core refer to CK-12

For Small Format XC Interchangeable Core refer to CK-13

For KESO F1 refer to page CK-18 .

For KESO refer to page CK-23 .

For Signature refer to page CK-28 .

For Degree refer to page CK-32

SARGENT keyed orders should include Keying Lead Sheet.

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

CK-4

CYLINDERS & KEYING

KEY CHARTS/KEY WIZARD

Disc Keywizard CD Paper

# Bittings Paper Disc Keywizard CD Price Price Price

1-50 KC1 KCD1 DLKW1 $202.00 $277.00 $352.00

51-200 KC2 KCD2 DLKW2 $309.00 $384.00 $459.00

201-1000 KC3 KCD3 DLKW3 $413.00 $488.00 $563.00

1001-3000 KC4 KCD4 DLKW4 $521.00 $596.00 $671.00

3001-6000 KC5 KCD5 DLKW5 $603.00 $678.00 $753.00

6001-9000 KC6 KCD6 DLKW6 $905.00 $980.00 $1,055.00

Over 9000 KC7 KCD7 DLKW7 Consult Factory

Note: Bitting Lists (a.k.a. Keycharts) requested for keysets ordered with factory keyed product for either a new or

existing system will be provided at no charge, except for Keywizard CD DLKW1 thru DLKW7

• Additional Bittings or P.O.’s for Bitting Lists Only – EXISTING MASTER KEY GROUPS

Up to 10 total for keysets tied to existing master key groups will be provided at no charge

11 or more bittings will be charged per above chart

• Additional Bittings or P.O.’s for Bitting Lists Only – NEW MASTER KEY GROUPS

Regardless of the quantity being requested, will be charged per above chart

These prices are for a hierarchial Master Key system with no cross-keying of selected keys.

For special requirements or for systems prior to 1997, consult factory for a quote.

An owner's letter of authorization must be attached to all purchase orders for additions to existing systems.

SARGENT is not liable for cylinders pinned incorrectly in the field.

Key Wizard Software

Catalog # Description Price

KW-SS1 Single license version $1,170.00

KW-SSN1 Network version $1,375.00

KW-DEMO1 Demonstration version $33.00

UP-KW-SSN1 Keywizard upgrade from Single Site Version to Network Version** $707.00

** Please consult factory for the availability of existing systems for use with Key Wizard products.

Note: First year of maintenance and technical support is included on ALL Key Wizard products

See catalog for system requirements

Registration form required prior to order acceptance

Contact SARGENT key records to determine size of bitting list

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

CK-5

CYLINDERS & KEYING

MORTISE & RIM CYLINDERS

Rim & Mortise Cylinder Numbers Specify Finish/Price

34 (Rim), 41, 42, 43, 44, 46 (Mortise) $86.00

48, 50, 52, 54 $125.00

56 $307.00

Note: Optional Cylinder Rossette: 1KB-1, 1KB-2, 1KB-3 are to be ordered and charged separately. Consult individual product catalogs for size.

Mortise Cylinders with following Suffix Cam No.

101* Adams Rite 1850, 4700

105 Short Cams I/S 78/82 (16 & 92) functions

106* Schlage L No Addition

112 “Open” Misc. – Wide Straight Cam

113* 4370 Key Switch Cam

115 SARGENT Hotel (50-) Cam – for 50-40 Series Cylinders

*For removable core cams, see CK-10 .

Hotel Type Mortise Cylinders – Consult Factory for existing system compatibility Specify Finish/Price

50-42, 50-43, 50-44 Hotel Cylinder (7850, 8250 only) $115.00

Mortise Cylinders, Exposed Barrel Only Specify Finish/Price

78-41 Thru 78-43 (only available in Std, 10-, 21-, and 22- options) $115.00

Mortise Cyl. Plugs 6-Pin US4 & 15 Finish

Plug No. Cylinder Size Price

13-0401 41

13-0402 42

13-0403 43 $28.51

13-0404 44

13-0405 46

13-0406 48

13-0407 50

13-0408 52 $42.78

13-0409 54

13-0474 56

Mortise Cyl. Bodies w/slideSpecify Finish

Cyl. Body No. Cylinder Size Price

13-2005 41

13-2006 42

13-2007 43 $42.35

13-2008 44

13-2009 46

13-2010 48

13-2011 50

13-2012 52 $61.04

13-2013 54

13-2382 56

Slide Only – for Mortise & Rim Cylinders

(100/pack) Price/Pack

13-0779 6-pin made before 5/08 $37.94

13-0780 7-pin made before 5/08 $47.42

13-1341 6-Pin Slide for 6300 made after 4/06$37.94

w/o box logo. Also on rim/mortise

cylinders after 6/08

13-1797 7-Pin Slide made after 6/08 $74.68

Mortise Cams

Part # Minimum Quantity 25 ea. Price

13-0097 “Open” Misc. Wide Straight Cam

13-0664 Standard $4.72

13-0665 Short Cam – I/S 78/82 (16 & 92) Functions

*13-0512 Adams Rite (1850, 4700)

*13-0921 For 4370 Key Switch Coverleaf Cam $7.07

13-2045 SARGENT Hotel (50-) Cam for 40 Series Cyls.

*13-0938 For Schlage L

01-1121 Cam Screws (Price/Pack - 100 cams) $27.26

Rim Cylinder Parts Specify Finish

13-0090 6 Pin Cylinder Plug $28.51

13-0587 7 Pin Cylinder Plug $28.51

13-2005 6 Pin Cylinder Body & Slide $42.35

13-2712 7 Pin Cylinder Body & Slide $42.35

13-0074 Connecting Screws 2-1/8" $0.63

13-0080 Plug Retainer $1.48

13-0085 Connecting Bar 2-1/2" $1.48

13-0086 Rim Cylinder Back Plate $2.16

13-0075 Connecting Screws 2-3/4" $1.63

*See CK-7 for removable core cams.

Note: Assembled Mortise & Rim cylinders include #97 Rosette are available in US3, 4, 9, 10, 10B, 10BE, 10BL, 14, 15, 20D, 32,

32D, BSP, and WSP finishes. Cylinder plugs/barrels will be in either US4 or 15. Specify finish when ordering.

Note: 6-Pin standard; 7-Pin available in #34 and size 42 and larger. Specify “7-Pin” when 7 Pin cylinders are needed and provide

keying details.

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

CK-6

CYLINDERS & KEYING

CYLINDERS & ACCESSORIES

Cylinder Rings Price Per Each Piece

Number Description 03/04/09/10/10B/10BE/10BL/14/15/20D/26/26D/32/32D/BSP/WSP

90 1/16", 1/8", 3/16", 1/4", 3/8" (Blocking Rings) $7.42

97 9/32" (Rosette) – standard for cylinders ordered w/o hardware (N/A 26/26D) $7.42

Mortise Lock Cylinder Rosettes Price Per Each Piece

Number Description 03/04/09/10/10B/10BE/10BL/14/15/20D/26/26D/32/32D/BSP/WSP

1KA-1 Cylinder Rosettes – 5/16" Projection $64.00

1KA-2 Cylinder Rosettes – 7/16" Projection $69.00

1KA-3 Cylinder Rosettes – 9/16" Projection $74.00

1KA-4 Cylinder Rosettes – 11/16" Projection $81.00

1KB-1 Cylinder Rosettes – 5/16" Projection $16.00

1KB-2 Cylinder Rosettes – 7/16" Projection $16.00

1KB-3 Cylinder Rosettes – 9/16" Projection $16.00

1KB-4 Cylinder Rosettes – 11/16" Projection $21.00

1SB-1 Cylinder Rosettes – 5/16" Projection $44.00

1SB-2 Cylinder Rosettes – 7/16" Projection $47.00

1SB-3 Cylinder Rosettes – 9/16" Projection $47.00

1SB-4 Cylinder Rosettes – 11/16" Projection $47.00

Cylinder Turn Knobs

Option Description Add

124 Cylinder Turn Knobs $34.00

Number 04/10B/10BE/BSP/WSP

41 thru Size 46 Sizes 41-46 standard cam

41-105 thru Size 46-105 Sizes 41-46 inside cylinder for 78/82 (16 & 92) functions $86.00

41-101 thru Size 46-101 Sizes 41-46 for #1850 Adams Rite Lock

Mail Box Cylinder Finishes

Number 04/15

4101 $105.00

01-4169 Cam Screw (2 required per cylinder) $0.54

13-0525 4101 Plug $28.51

13-0527 Cam $2.97

06-0166 Retaining Ring $1.94

Note: U.S. Postal regulations DO NOT allow masterkeyed Mail Box Cylinders.

Available Keyed Different ONLY.

Note: Mortise & Rim cylinders are available in US3, 4, 9, 10, 10B, 10BE, 10BL, 14, 15, 20D, 32, 32D, BSP, WSP finishes.

Cylinder plugs/barrels will be in either US4 or 15. Specify finish when ordering.

CK-7

CYLINDERS & KEYING

BORED LOCK CYLINDERS & PARTS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

T-Zone (11-Line) 10L, 6500L, 7L Cylinder Assemblies and Components

Part# Description Price

*C11-1 Cylinder - 11L T-Zone Lever Lock (except 50 function) $84.00

*C11-2 Cylinder - 11L T-Zone Lever Lock - 50 function $123.00

*C10-1 Cylinder - 10, 8L, 7L, 6500 Lever Lock $84.00

*C10-2 Cylinder - 10, 8L, 7L, 6500 Lever Lock - 50 function $123.00

13-3257 Body & Slide Assy. (11, 10, 7, 6500) $39.20

*13-3142 Cyl. Plug & Ring Assy. (11, 10, 7, 6500) $28.51

11-0231 Cyl. tailpiece for VC 11 line $1.60

05-0017 Plastic Cyl. Support Ring (6500) $0.38

05-0028 Cyl. Retainer Lever (6500) $0.72

05-0040 Cyl. Tailpiece-6500 7-Pin XC $6.93

10-0019 Plastic Cyl. Support Ring (10L) $0.62

10-0239 Cyl. Tailpiece 6-Pin (SFIC & LFIC - 6500, 10L, 7L)

Except 54 Function $1.78

10-0240 Cyl. Tailpiece 7-Pin (SFIC-10L, 6500, 7L)

Except 54 Function $1.78

10-0286 Cyl. Tailpiece 6-Pin (54 function 10L, 7L) $1.78

10-0287 Cyl. Tailpiece 7-Pin (54 function - 10L, 7L) $1.78

10-0842 Tailpiece (10 Line) for Schlage SF option $4.59

11-0403 Tailpiece (11 Line) for Schlage SF prefix $4.33

10-3138 Cyl. Tailpiece-10L, 7L 7-Pin XC $5.95

11-0171 Cyl. Tailpiece 6-Pin (SFIC - 11L) $1.60

11-0172 Cyl. Tailpiece 6-Pin (LFIC-11L) & 7-Pin (SFIC-11L) $1.60

11-0276 Cyl. Tailpiece-11L 7-Pin XC $5.73

*13-0201 Cyl. Plug - 11L 50 function $45.14

13-0205 Plug Retaining Ring (11L, 10l, 7L, 6500) $1.94

13-0680 Cyl. Tailpiece Retainer (11L, 10L, 7L, 6500) $1.94

13-0895 Cyl. Tailpiece (10L, 7L, 6500) $1.98

13-1385 Cyl. Tailpiece (11L) $1.98

9, 8, 8X Line Cylinder Assemblies and Components Price

* C8-1 Cylinder - 9, 8L Knob Locks (except 50 function) $84.00

* C8-2 Cylinder - 9, 8L Knob Locks - 50 function $123.00

* C8X-1 Cylinder - 8X Knob Locks - All except 50 function $84.00

13-2048 9, 8L Cylinder Body & Slide Assembly. $39.20

13-0920 8X Cylinder Plug $28.51

* 13-3425 9, 8L Cylinder Plug & Pin $28.51

06-0166 9, 8L Plug Retaining Ring $1.94

13-0205 Plug Retaining Ring (11L, 10l, 7L, 6500) $1.94

6 Line Cylinder Assemblies and Components Price

* C6-1 Cylinder - 6L Knob Lock (S & N knobs) $84.00

* C6-1B Cylinder - 6L Knob Lock (B knob) $84.00

* C6-2 Cylinder - 6L Knob Lock (S & N knobs) - 50 function $123.00

* C6-2B Cylinder - 6L Knob Lock (B knob) - 50 function $123.00

13-3257 Cylinder body & Slide Assembly $39.20

* 13-3142 Cylinder Plug & Ring Assembly $28.51

13-0907 Cylinder Tailpiece (S & N Knobs) $1.94

13-0908 Cylinder Tailpiece (B Knob) $1.94

13-0205 Plug Retaining Ring $1.94

* 13-0674 Cylinder Plug/No Ring-50 function $28.51

13-0845 Cylinder Tailpiece (S + N Knobs-50 function) $1.94

13-0846 Cylinder Tailpiece (D Knob-50 function) $1.94

13-0680 Tailpiece Retainer Ring $1.94

5, 5500 Series Cylinder Assemblies & Components Price

* C5500-1 Cylinder - 5L, 5500 Knob Lock $77.00

13-3514 Cylinder Body/Slide $39.20

*13-0920 Cylinder Plug $28.51

13-0919 Cylinder Tailpiece $1.94

01-0870 Plug Retaining Ring (5500) $1.94

05-0214 Retainer (5-Line only) $5.03

• 460/470/480 Deadbolt Cylinder Price

*C480-1 Cylinder - 484, 474 Aux Lock $84.00

* C480-2 Cylinder - 485, 487 Aux Lock $84.00

* C480-3 Cylinder - 475, 486 Aux Lock $84.00

*C460-1 Cylinder - 464 Aux Lock $84.00

* C460-2 Cylinder - 465 Aux Lock $84.00

13-3493 Cylinder Body/Slide Assembly $39.20

*13-0874 Cylinder Plug (470, 480) $28.51

* 13-0904 Cylinder Plug (• 460) $28.51

* 13-0178 Cylinder Plug (4142, 4143) $28.51

13-0875 Cylinder Cap (470, 480) $2.97

13-0903 Cylinder Cap (460) $2.97

13-0884 Blocking Piece $0.99

13-0691 Cylinder Cap Pin for (460, 470, 480)

made before 6/03 $0.99

13-0693 Cylinder Cap Spring (460, 470, 480)

made before 6/03 $0.99

13-0878 Tailpiece (464, 474, 484 -1-3/4" Dr. only) $1.87

13-0880 Tailpiece (465, 485, 487) $1.87

13-0881 Tailpiece (486, 475) $2.51

13-0882 Cylinder Tail Washer (484) $1.94

13-0883 Cylinder Tail Washer

(465, 475, 485, 486, 487) $1.94

13-1554 Cap Pin (460, 470, 480) made after 6/03 $1.02

13-1555 Cap Spring (460, 470, 480) made after 6/03 $1.02

7600 Integralock Cylinders (All functions except 26, 27 & 50)

Option Number Description Price

* C7600-1 Regular $125.00

10 * C7600-1 Signature $181.00

10-21 * C7600-1 Construction & Signature $213.00

21 * C7600-1 Construction $157.00

13-0080 Barrel Retainer $1.48

13-1116 Adaptor for 7600 $33.87

13-1139 Cylinder Body 6-Pin $40.99

13-1140 Cylinder Body-Signature $40.99

758/858 Padlock Price

C750-1 758/858 Cylinder & Tailpiece Assembly $84.00

13-1230 758 Cylinder Tailpiece $1.80

13-1231 Tailpiece (60-) for 758/858 $3.71

17-2633 758/ 858 Cylinder retainer and screw pack $13.59

13-4065 63-758/858 Cylinder & Tailpiece Assembly $88.07

01-9219 858 Cyl. retainer screw $5.06

•460 series has been discontinued

*Specify Finish – US4 or US15

CK-8

CYLINDERS & KEYING

XC SERIES

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

XC Cylinders and Key System - OPTION (to be added to all applicable products, except where noted in product catalogs)

Option Description Add

11 XC Key System - Includes 2 change keys standard No addition

Notes: When expanding existing key systems, a copy of the existing bitting list is required at time of order,

if not already on file w/SARGENT Key records department.

XC options not available with the following options: 10, 22, 35, 51, 52, SC, SE

XC options not available with the following lock functions: 50

Available in Small Format Interchangeable core - refer to CK-13 for prices

Orders for new masterkeyed systems will receive 6 master keys. For additional, please note on order.

Keyways available:

SARGENT keyway families: L, R

Prior authorization from SARGENT key records is required before establishing a new key system

Keying Charges & Substitutions Add

Masterkeying or Higher level of keying, any quantity

Masterkeying or Higher level of keying, any quantity, cylinder only $16.00 /cyl

Construction Masterkeying (21-) with cylinders only

Construction Masterkeying (21-) with lockset or exit device or cylinder

Cut Master/Change (Day) Keys

Option Number Description Price Each

11 X6272MK Masterkey, Grandmasterkey – 6 pin

11 X6272CMK Construction Masterkey – 6 pin $9.00

11 X6272CHK Change (Day) Key – 6 pin

Keyblanks - Packed 50 per Box Keyway Families Available

Option Number Description Price Each

11 X6270 Master Keyblanks 6-Pin L, R refer to CK-15

11 X6275 Day/Change Keyblanks 6-Pin L, R

Note: All SARGENT XC keyblanks are identified with the following markings:

SARGENT, "XC", "PAT. 6,526,791" and DO NOT DUPLICATE"

Extra Keys - Cylinders are packed standard with 2 change keys each Price

For each extra key ordered with locksets, exit devices or cylinders $5.00 /key

For keys packed separately $4.00 /cylinder

Additional Charges:

Key Marking - Special marking is limited to space on blank side of keyblank

Visual Key Control - Refer to CK-3

Delete SARGENT logo

Restricted Keyway - for charges

All orders for restricted keyblanks, barrels, or product containing cylinders that

have a restricted keyway must include a letter of authorization or a copy of

purchase order from the end user.

Prior authorization from SARGENT key systems is required before

establishing a new key system that requires a restricted keyway.

CK-9

CYLINDERS & KEYING

XC SERIES

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Mortise Cylinder 6 Pin (The XC add is included)

Number Specify finish when ordering Price

11-41, 11-42, 11-43, 11-44, 11-46 $86.00

11-48, 11-50, 11-52, 11-54 $125.00

11-56 $307.00

Note: Price does not include Masterkeying

Body & Slide - 6-Pin - Mortise Cylinder (11-40 Series)

Number Specify finish when ordering Price

13-4301 for #41

13-4302 for #42

13-4303 for #43 $42.35

13-4304 for #44

13-4305 for #46

13-4306 for #48

13-4307 for #50

13-4308 for #52 $61.04

13-4309 for #54

13-4310 for #56

Plug - 6-Pin - Mortise Cylinder (11-40 Series)

Number Specify finish (4 or 15)

13-4314 for #41

13-4315 for #42

13-4316 for #43 $28.51

13-4317 for #44

13-4318 for #46

13-4319 for #48

13-4320 for #50

13-4321 for #52 $42.78

13-4322 for #54

13-4323 for #56

Optional Cams for use w/11-40 Series Mortise Cylinders

Cam No. Add/cyl

101 For Adams Rite 1850, 4700

105 SARGENT Short Cams I/S 78/82

(16 & 92) functions No Addition

106* For Schlage “L”

112 “Open” Misc. – Wide

Straight Cam

113* For 4370 Key Switch

Coverleaf Cam

01-1121 Cam Screw (Price/Pack - 100 cams) $27.26

Note: when ordering screws, order in multiples of 100

Rim Cylinder (The XC add is included)

Number Specify finish when ordering Price

11-34 $86.00

Note: Price does not include Masterkeying

Body & Slide - 6-Pin - Rim Cylinder (11-34 series)

Number Specify finish when ordering Price

13-4301 $42.35

Plug - 6-Pin - Rim Cylinder (11-34 series)

Number Specify finish (4 or 15) Price

13-4312 $28.51

Bored Cylinder Assembly 6 Pin (The XC add is included)

Option/Number Specify finish (4 or 15) Price

11 C11-1 for T-Zone

11 C10-1 for 10, 7L, 6500 (8 Line lever)

11 C8-1 for 8, 9 (7 Line knob)

11 C8X-1 Cylinder – 8X Knob Locks

All Except 50 Function

11 C6-1 for 6 Line (S & N knobs)

11 C6-1B for 6 Line (B knob) $84.00

11 C5500-1 for 5500

11 C480-1 for 474, 484

11 C480-2 for 485, 487

11 C480-3 for 475, 486

11 C460-1 for 464

11 C460-2 for 465

11 C750-1 for 758 Padlock

11 C7600-1 for 7600 Integra (Except 26, 27, & 50) $125.00

Note: Price does not include Masterkeying

Note: Above available for all functions except 50 function

Cylinder Body - Bored Lock

Number Price

13-4334 for T-Zone, 10, 7L, 6500 (8 Line lever)

13-4335 for 8, 9 (7 Line knob)

13-4336 for 6 Line (B, S & N knobs)

13-4338 for 5500 $39.20

13-4337 for 460, 470, 480 Series

13-4334 for 758 Padlock

13-4339 for 7600 Integra Lock $40.99

Barrel/Plug Assembly - Bored Lock

Number Specify finish (4 or 15) Price

13-4332 for T-Zone, 10, 7L, 6500 (8 Line lever)

13-4332 for 6 Line (B, S & N knobs)

13-4331 for 8, 9 (7 Line knob)

13-4328 for 5500 $28.51

13-4330 for 480, 470 Series

13-4329 for 460 Series

13-4332 for 758 Padlock

13-4312 for 7600 Integra Lock $28.51

Note: Mortise & Rim cylinder housings include #97 Rossette are available in the following finishes: 3, 4, 9, 10, 10B, 10BE, 10BL, 14, 15,

20D, 32, 32D, BSP, WSP. Bored Cylinder Assemblies, cylinder plugs/barrels are available in the following finishes: 4, 15.

CK-10

CYLINDERS AND KEYING

LARGE FORMAT IC CORE CYLINDERS

& OLD STYLE REMOVABLE CORE CYLINDERS

SARGENT Large Format Interchangeable Core Mortise & Rim Cylinders - Includes Master & Grand Master Keying Charges Price

Number Specify Finish

6334 (rim), 6342, 6343, 6344, 6346 6-Pin only $160.00

50-6343 6-Pin only - Hotel cylinder $189.00

SARGENT Large Format Interchangeable Cores ONLY - Includes Master & Grand Master Keying Charges

6300 6-Pin $74.00

SARGENT Large Format Interchangeable Core Housings - Mortise (includes standard Cam unless specified other) & Rim Bodies ONLY

6034 (Rim), *6042, *6043, *6044, *6046 6-Pin only $86.00

50-6043 6-Pin only - Hotel Cylinder $115.00

Cut Master/Change (Day) Keys

6272CTL Control Key

6272MK Master Key $9.00

6272CHK Change (Day) Key

*Cylinders with following Cams (6042, 6342, 6043, 6343, 6044, 6344, 6046, 6346 Cylinders)

101 For Adams Rite – 1850, 4700

105 Sargent Short Cam – for 16 & 92 functions

106 For Schlage L No Addition

112 “Open” Misc. – Wide Straight Cam

113 For 4370 Key Switch

115 SARGENT Removable (63-) Hotel (50-) Cam for 50-60/63-43 cyl.

Note: *Cams must be ordered with cylinders – permanently attached at the factory.

SARGENT Large Format Interchangeable Cores ONLY - Unassembled

65-6300** H-Keyway – standard – other Keyways available $64.00

65-50-6300** Hotel Cores - C family Keyway-standard

Disposable Plastic Core (60-Option)

13-5177 Plug Assembly (RC-60) $4.07

6300 Plug/Parts

13-0795 6-Pin – Barrel $28.51

13-3424 Inner Body and Slide Assy for 6300 $28.51

13-0796 Control Sleeve for 6300 $24.76

01-0660 (Price/Pack - 100 rings) Retaining Ring for 6300 & 10-6300 & 11-6300 $84.18

13-0797 (Price/Pack - 100 slides) Slide for 6300 made before 3/06 w/box logo $37.94

13-1341 (Price/Pack - 100 slides) Slide for 6300 made after 4/06 w/o box logo $37.94

Removable Core Cylinders - OLD STYLE - FOR EXISTING SYSTEMS ONLY - Prices DO NOT include keying charges. Specify Finish

51 Option Permanent Core Add $75.00 Each Cylinder

52 Option Construction Core See CK-2

Removable Core Cylinders - OLD STYLE - FOR EXISTING SYSTEMS ONLY - Prices DO NOT include keying charges Specify Finish

134 Rim 7-Pin $85.00

142, 143, 144, 146 Mortise 7-Pin

Note: Must specify 51- (permanent core) or 52- (construction core) option when ordering old style removable core cylinders

Removable Core ONLY - OLD STYLE - FOR EXISTING SYSTEMS ONLY - Prices DO NOT include keying charges. Specify Finish

5134 (for Rim) 7-Pin $75.00

5142, 5143, 5144, 5146 (for Mortise) 7-Pin

Plug ONLY - OLD STYLE Specify Finish

13-0402 Mortise Plug 7-Pin $28.51

13-0242 Rim Plug 7-Pin $36.18

Mortise and Rim Housing Only - OLD STYLE Specify Finish

13-2052 Mortise 7-Pin

13-2053 1-3/8" long mortise body only

13-2054 1-1/2' long mortise body only $70.70

13-2055 1-3/4' long mortise body only

13-2057 Rim 5&6-Pin back plate and screws to be ordered separately

13-0265 (Price/Pack - 100 springs) Spring for all chambers except control $14.23

13-0215 (Price/Pack - 100 springs) Spring only for control chamber $84.18

13-1797 (Price/Pack - 100 springs) 7-pin Slide without box logo $74.68

**Specify finish – US4 or US15

Note: Mortise & Rim cylinder housings include #97 Rossette are available in US3, 4, 9, 10, 10B, 10BE, 10BL, 14, 15, 20D, 32,

32D, BSP, WSP finishes. Bored cylinder plugs/barrels/cores will be in either US4 or 15. Specify finish when ordering.

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

CK-11

CYLINDERS AND KEYING

SARGENT XC LARGE FORMAT

INTERCHANGEABLE CORE CYLINDERS

SARGENT XC Large Format Interchangeable Core Options:

Options Description Add

1160 SARGENT XC Large Format Interchangable Core - plastic disposable core provided No Addition

1163 SARGENT XC Large Format Interchangable Core - 6 pin keyed $74.00

1164 SARGENT XC Large Format Interchangable Core, 6-Pin construction core provided $74.00

Note: 11-6300 core will only work in Sargent hardware ordered with 11-60, 11-63, or 11-64 options.

Option No. Cut Master/Change (Day) Keys

11 X6272CTL Control key

11 X6255CTL Control key for 1 bitted 11-6300 cores $9.00

11 X6272MK Masterkey

11 X6272CHK Change (Day) Key - 6 Pin

Retrofit Parts/Tail Pieces required with hardware not ordered to accept 11-6300 core Price

08-5265 10-60-63 8 Line Knob Parts Pack $37.50

10-3429 10, 7, 6500 Tail Piece & Retainer Pack $8.64

11-5003 11 Line “T-Zone” Tail Piece & Retainer Pack $7.91

13-5178 11-60-63-34 Rim Cylinder Parts Pack $33.66

16-2508 460 Series Cam Assembly $3.50

17-2632 758/858 Tail Piece & Retainer Pack $9.87

431-6 Shear Tool used to modify existing 60- Mortise cylinder housings to accept 11-6300 core $401.00

432RC Mortise Removable Core Cylinder Installation Tool $68.00

XC Large Format Interchangeable Core Mortise & Rim Cylinders Price

– Includes Master & Grand Master Keying Charges Price Specify Finish

11-6334 (Rim), 11-6342 6-Pin Only

11-6343, 11-6344 6-Pin Only $160.00

11-6346 6-Pin Only

XC Large Format Interchangeable Core ONLY - Includes Master & Grand Master Keying Charges

11-6300 6-Pin $74.00

XC Large Format Interchangeable Core Cylinders - Mortise (includes standard Cam unless specified other) & Rim Bodies ONLY

11-6034 (Rim), *11-6042 6-Pin Only

*11-6043, 11-6044 6-Pin Only $86.00

11-6046 6-Pin Only

*Cylinders with following optional Suffix Cams (11-6042, 11-6342, 11-6043, 11-6343, 11-6044, 11-6344, 11-6046, 11-6346 Cylinders)

101 For Adams Rite – 1850, 4700

105 Sargent Short Cam – for 78/8200 16 & 92 functions No Addition

106 For Schlage L

112 “Open” Misc. – Wide Straight Cam

113 For 4370 Key Switch

Removable Cores ONLY - Unassembled

11-65-6300** $64.00

Disposable Plastic Core (11-60 Option)

13-5177 Plug assembly $4.07

11-6300 Plug/Parts

13-4326 6-Pin Barrel XC $28.51

13-5175 Inner Body and Slide Assy for 11-6300 $28.51

13-0796 Control Sleeve for 6300 & 11-6300 $24.76

01-0660 (Price/Pack - 100 rings) Retaining Ring for 6300, 10-6300, & 11-6300 $84.18

13-1341 (Price/Pack - 100 slides) 6-pin Slide for 6300 made after 4/06 without box logo $37.94

Note: Cylinders shipped less hardware comes with #97 cylinder ring.

Note: Mortise & Rim cylinders include #97 Rossette are available in US3, 4, 9, 10, 10B, 10BE, 10BL, 14, 15, 20D, 32, 32D, BSP,

WSP finishes. Cylinder plugs/barrels/cores will be in either US4 or 15. Specify finish when ordering.

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

CK-12

CYLINDERS AND KEYING

SMALL FORMAT INTERCHANGEABLE CORE

Price Book No. 31 | May 1, 2018

SMALL FORMAT INTERCHANGEABLE CORE OPTION (to be added to all applicable products, except where noted in product catalogs)

Options Description Add

70 Small Format Interchangeable core - plastic disposable core provided No addition

72 Small Format Interchangeable core - 6-Pin construction core provided $66.00

73 Small Format Interchangeable core - 6-Pin keyed

- Includes Master & Grand Master Keying charges $66.00 /cyl

73-7P Small Format Interchangeable core - 7-Pin keyed

-Includes Master & Grand Master Keying charges

Notes: Orders with Small Format Interchangeable type construction cores (72-) receive 6 construction

keys and 1 control key per order as standard. For additional, please note on order.

Orders for new masterkeyed systems will receive 6 master keys. For additional, please note on order.

Mortise cylinder offered size #43 or 46 with SARGENT offset cam only;

Rim cylindersize #34 only with SARGENT hole pattern.

When expanding existing key systems, a copy of the existing bitting list is required at time of order,

if not already on file w/SARGENT Key records department.

Keyways available:

Small format competitor keyway: A, B, C, D, E, F, G, H, J, K, L, M.

Small format SARGENT keyway: 4A standard, 4B restricted keyway - A2 or A4 System.

Prior authorization from SARGENT key records is required before establishing a new key system.

Cut Master Keys and Change Keys Price Each

6282BMK Masterkey/Grandmasterkey – 6 pin

7282BMK Masterkey/Grandmasterkey – 7 pin

6254BCTL Construction Control Key (72-) 6 pin $9.00

6282BCMK Construction Masterkey (72-) 6 pin

6282BCTL Control Key (73-) 6 pin permanent core

7282BCTL Control Key (73-) 7 Pin permanent core

6282BCHK Day/change key (73-) - 6 pin

7282BCHK Day/Change key (73-7P) - 7 pin

Keyblanks - Packed 50 per Box Price

6285B Small Format system Keyblanks - 6 Pin - specify keway required - example: 6285BA $2.61

7285B Small Format system 7 pin Keyblanks specify keway required - example: 7285B-4A

6285B4B Small Format system Keyblanks - 6 Pin Restricted Keyway - example: 6285B4B $5.44

7285B4B Small Format system 7 pin Keyblanks - Restricted Keyway - example: 7285B 4B

Visual Key Control Price

Stamping of cylinder plug not available, stamping of the keys with key set standard N/A

Each additional key stamped $1.00 /key

Concealed Stamping of Keyset on core (7 Characters) $8.00 /cyl

Cylinder permanent stamping options: Cylinder plug/barrel face N/A

Additional Charges:

Extra Keys - Refer to CK-3

Key Marking - Special marking is limited to space on blank side of keyblank Refer to CK-3

Delete SARGENT Logo/Key Section N/A

Restricted Keyway - for charges Refer to CK-3

Less Logo/Key Section N/A

Mortise/Rim Cylinder with IC Core, Cylinder Shells

Number Description Price

73-43 1-3/8" Mortise 6-Pin w/SARGENT cam

73-46 1-3/4" Mortise 6 Pin w/SARGENT cam

73-34 Rim 6-Pin $152.00

73-7P-43 1-3/8" Mortise 7-Pin w/SARGENT cam

73-7P-46 1-3/4" Mortise 7-Pin w/SARGENT cam

73-7P-34 Rim 7-Pin

70-43 1-3/8" Mortise 6 or 7 Pin cylinder shell

70-46 1-3/4" Mortise 6 or 7 Pin cylinder shell $86.00

70-34 Rim 6 or 7 Pin cylinder shell

Note: Specify finish: 3, 4, 9, 10, 10B, 10BE, 10BL, 14, 15, 20,

26, 26D, BSP, WSP.

IC Cores ONLY – Keyed, Uncombinated, Construction Cores

Number Description Price

7300B 6-Pin Master keyed core $66.00

7P-7300B 7-Pin Master keyed core

65-7300B 6-Pin uncombinated - no keyblanks $56.00

65-7P-7300B 7-Pin uncombinated - no keyblanks

7200 6 Pin Construction core (72-) $66.00

13-5176 Disposable plastic core - assy $1.96

13-1507 70-34 rim cylinder tail piece $1.93

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

CK-13

CYLINDERS & KEYING

XC - SMALL FORMAT INTERCHANGEABLE CORE

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

XC SMALL FORMAT INTERCHANGEABLE CORE OPTIONS

(to be added to all applicable products, except where noted in product catalogs)

Options Description Add

1170 XC Small Format Interchangeable core - plastic disposable core provided No addition

11727P XC Small Format Interchangeable core - 7-Pin construction core provided $66.00

11737P XC Small Format Interchangeable core - 7-Pin keyed

- Includes Master & Grand Master Keying charges $66.00 /cyl

Notes: For use in Sargent hardware only and only for use in hardware ordered with proper prefixes such as 11-70,

11-72-11-73. Orders with XC Small Format Interchangeable type construction cores (11-72-) receive

6 construction keys and 1 control key per order as standard. For additional, please note on order.

Orders for new masterkeyed systems will receive 6 master keys. For additional, please note on order.

Mortise cylinder size #43 with SARGENT offset cam only; Rim cylinder size #34 only with SARGENT hole

pattern. When expanding existing key systems, a copy of the existing bitting list is required at time of order,

if not already on file w/SARGENT Key records department.

Keyways available:

XC Small format SARGENT keyway families: 4A standard, 4B restricted keyway - A2 or A4 System

Prior authorization from SARGENT key records is required before establishing a new key system

Option Number Cut Master Keys cut day/change keys Price Each

11 X7282BMK XC Masterkey/Grandmasterkey

11 X7282BCTL Control Key - 7 pin $9.00

11 X7282BCHK XC day/change key - 7 pin

7282BCMK XC Construction Masterkey 11-72

7254BCTL XC Construction Control Key 11-72

Option Number Keyblanks - Packed 50 per Box Price

11 X7285B XC Small Format system Keyblanks - 7 Pin - example: 11-X7285B4A $2.61

11 X7285B4B XC Small Format system Keyblanks - Restricted Keyway - example: 11-X7285B4B $5.44

Prior authorization from SARGENT key records is required before establishing a new key system

Notes: All SARGENT XC keyblanks are identified with the following markings:

SARGENT, “XC”, PAT, 6,526,791 and DO NOT DUPLICATE

Extra Keys - Cylinders are packed standard with 2 keys each Price

For each extra key ordered with locksets, exit devices or cylinders $5.00 /key

For cylinders packed separately $4.00 /cyl

Visual Key Control Price

Stamping of cylinder plug and/or two keys with industry standard alpha numeric keyset symbol (Plug N/A stamped) N/A

Each additional key stamped $1.00 /key

Stamping code (keyset symbol) on mortise cylinder, rim cylinder, or 11-7300B body $8.00 /cyl

XC Cylinder permanent stamping options: Cylinder plug/barrel face N/A

XC 11-7300B cores stamped on the side of core with up to 7 characters $8.00 /cyl

Additional Charges:

Key Marking - Special marking is limited to space on blank side of keyblank Refer to CK-3

Delete SARGENT Logo/Key Section N/A

Restricted Keyway - for charges Refer to CK-3

Less Logo/Key Section N/A

Mortise/Rim Cylinder with IC Core, Cylinder Shells

Number Description Price

11737P-34 XC Rim Cyl. 7-Pin

11737P-43 XC Mortise 7-Pin w/SARGENT cam$152.00

11737P-46 XC Mortise Cyl. 7-Pin

1170-34 XC Rim 7 Pin cylinder shell

1170-43 XC Mortise 7 Pin cylinder shell $86.00

1170-46 XC Mortise 7 Pin cylinder shell

Note: Specify finish: 3, 4, 9, 10, 10B, 10BE, 10BL, 14, 15, 20,

26, 26D, BSP, WSP

IC Cores ONLY – Keyed, Uncombinated, Construction Cores

Number Description Price

117P-7300B 7-Pin Master keyed core $66.00

11657P-7300B 7-Pin uncombinated - no keyblanks $56.00

117P-7200 Construction core (11-72-) $66.00

13-5174 Disp. plastic core - bottom plug (70-) $3.50

431-7 Pin Shear Tool $401.00

05-0040 XC Tailpiece - 6500-7-Pin $6.93

10-3138 XC Tailpiece - 10L-7-Pin $5.95

11-0276 XC Tailpiece - 11L-7-Pin $5.73

13-1507 11-70-34 rim cylinder tail piece $1.93

CK-14

CYLINDERS & KEYING

KEYING KITS • TOOLS • GAUGES • COMPONENTS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Keying Kits • Tools • Gauges Price

— Depth Key Sets $53.00

LT2 Cylinder Loading Thimble $60.00

LT6 Cylinder Loading Rod $53.00

2 Tru-Arc Plier $53.00

431-6 Shear Tool used to modify existing 60- Mortise cylinder housings to accept 11-6300 core $401.00

431-7 Small Format Pin Shear Tool $401.00

432RC Sargent Removable Core Installation Tool $68.00

432IC Small Format Interchangeable Core Installation Tool $68.00

436-1 Top Loading Kit $644.00

435 Key Gauge $37.00

437BR Bump Resistant Retrofit pinning Kit $405.00

437C Rekeying Kit (Conventional Keying) $821.00

437RC Removable Core Rekeying Kit (Conventional & Signature) $386.00

437S Signature Re-keying Kit $821.00

439 Lost Ball (21 Option) Field Construction Keying Kit $552.00

13-1034 Loading Rod (6, 8, 10L & Mortise) $25.57

13-1035 Loading rod (480, 6300) $37.69

13-1037 Pin Loading Rod $13.38

13-1103 Field Construction Balls (3 required per cylinder) (Price/Pack - 500/pack) $130.41

13-1138 Spring Loading Rod $13.38

14-0070 Extractor (Used with 22- Option) $4.85

18-0070 Cylinder Lube Spray $25.57

18-0435 Cylinder Cleaner/De-Icer $25.57

77-0273 Loading Rod $20.48

Part No. Bottom (Key) Pin Size Price/Pack (100 Pins)

13-0064 1

13-0065 2

13-0066 3

13-0067 4

13-0068 5

13-0069 6

13-0070 7

13-0071 8

13-0072 9

13-0073 10

Cylinder Spring/Slides (100/pack) Price/Pack

13-0265 Springs $14.23

13-0779 KIK/KIL slides for cyls. made prior to June, 2008 $37.94

13-0797 Slide for 6300 made before 3/06 with box logo $37.94

13-0487 Hollow Driver Spring (3rd & 4th) $84.18

13-0215 Control Spring for Old Style Rem. Core $84.18

13-1341 KIK/KIL slides for cyls. made after June,2008 $37.94

13-1769 Springs for all chambers in factory

master keyed 6300s starting 1/1/09 $18.96

Signature Cylinder Pins (Optional for 437RC kit)

Hardened Stainless Pins (for UL437 Cylinders)

Part. No. Size Price/Pack (25 Pins)

13-1210 1

13-1211 2

13-1212 3

13-1213 4

13-1214 5

13-1215 6

13-1216 7

13-1217 8

13-1218 9

13-1222 B-Driver

13-1223 C-Driver

Note: To re-key existing Sargent UL437 Cylinders.

Master Pins (Splits & Drivers) Price/Pack

Part No. Size (100 Pins)

13-0051 2

13-0052 3

13-0053 4

13-0054 5

13-0055 6

13-0056 7

13-0057 8

13-0058 9

13-0059 10

13-0060 11

13-0061 12

13-0062 13

13-0063 14

For Sargent 6300 LFIC & Signature Price/

Removable Core—for 3rd & 4th positions: Pack

Part. No. Hollow Drivers Size (100 Pins)

13-1229 3 $43.00

13-1234 4

13-1235 5

13-1236 6

13-1237 7

13-1238 8

13-1239 9

13-1240 10

13-1761 11

For Sargent 6300 LFIC & Signature

Removable Core—Parts: Price/Pack

Part. No. Miscellaneous (100 Rings)

01-0660 Retaining Ring $84.18

Bump Resistant Pins (Min. Qty. 100 ea.) Price/Pk

Part No. Size (100 Pins)

13-1770 10 $55.00

13-1773 13

$16.00

(Order in

multiples

of 100)

$84.00

(Order in

multiples

of 25)

$16.00

(Order in

multiples

of 100)

$24.00

(Order in

multiples

of 100)

CK-15

CYLINDER & KEYING

KEYBLANKS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Key Blanks - 5 Pin (Minimum Quantity – 50 each) Price

Number Section Per Each Key

Single Keyway Systems

265 U*, R* $2.80

275 S* $2.20

*Used on existing systems ONLY.

Multi Keyway Systems – Composite Sections

270 LD, LH, LM, RD, RH, RM $2.50

270 LDH, LDM, LHM, LN, RDH, RDM, RHM, RN $2.50

273 CD, CH, CM (Large Bow) $4.10

273 CDH, CDM, CHM, CN (Large Bow) $4.10

Multi Keyway Systems – Single Sections

275 LA, LB, LC, LE, LF, LG, LJ, LK, LL, RA, RB, RC, RE, RF, RG, RJ, RK, RL $2.20

Single Keyway System (Large bow)

278 CR $3.40

Multi Keyway System (Large bow)

278 CA, CB, CC, CE, CF, CG, CJ, CK, CL $3.40

Key Blanks - 6 PIN (Minimum Quantity – 50 each)

Single Keyway Systems

6265 U*, R* $2.80

6275 S* $2.40

*Used on existing systems ONLY.

Multi Keyway Systems – Composite Sections

6270 HD, HH, HM, LD, LH, LM, RD, RH, RM $2.60

6270 HDH, HDM, HHM, HN, LDH, LDM, LHM, LN, RDH, RDM, RHM, RN $2.60

Multi Keyway Systems – Composite Sections (Large Bow)

6273 CD, CH, CM $4.10

6273 CDH, CDM, CHM, CN $4.10

Multi Keyway Systems – Single Sections

6275 HA, HB, HC, HE, HF, HG, HJ, HK, HL, LA, LB, LC, LE, LF, LG, LJ, LK, LL, $2.20

RA, RB, RC, RE, RF, RG, RJ, RK, RL

Multi Keyway Systems – Large Bow Single Sections

6278 CA, CB, CC, CE, CF, CG, CJ, CK, CL $3.40

Single Keyway System - Large Bow

6278 CR $3.40

Option Number XC Keyblanks available in L, R Keyway Families

11 X6270 L, R Master Keyblanks 6-Pin $2.70

11 X6270 LD, LH, LM, RD, RH, RM $2.60

11 X6270 LDH, LDM, LHM, LN, RDH, RDM, RHM, RN $2.70

11 X6275 L, R Day/Change Keyblanks 6-Pin $2.20

For keys not shown, consult factory.

SFIC Families

6285B 6 pin -x Keyway – A, B, C, D, E, F, G, H, J, K, L, M, 4A $2.61

7285B 7 pin -x keyway – A, B, C, D, E, F, G, H, J, K, L, M, 4A $2.61

XC SFIC Families

11 X7285B Keyway – 4A 7 pin blanks $2.61

CK-16

CYLINDER & KEYING

KEYBLANKS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Key Blanks - 7 Pin (Minimum Quantity – 50 each) Price

Number Section Per Each Key

Single Keyway Systems

7275 S* $2.40

*Used on existing systems ONLY.

Multi Keyway Systems – Composite Sections

7270 LD, LH, LM, RD, RH, RM $2.70

7270 LDH, LDM, LHM, LN, RDH, RDM, RHM, RN $2.70

Multi Keyway Systems, Composite Sections (Large Bow)

7273 CD, CH, CM $4.10

7273 CDH, CDM, CHM, CN $4.10

Multi Keyway Systems – Single Sections

7275 LA, LB, LC, LE, LF, LG, LJ, LK, LL, RA, RB, RC, RE, RF, RG, RJ, RK, RL $2.40

Multi Keyway Systems – Large Bow Keys

7278 CA, CB, CC, CE, CF, CG, CJ, CK, CL $3.40

Restricted Keyblanks - End user authorization letter required with each order. SARGENT Keyway family’s – A, B, G, K, N, V

6275 Non-Published (restricted) Day Key Blank (6 pin) $3.10

6270 Non-Published (restricted) Master Key Blank (6 pin) $3.40

7275 Non-Published (restricted) Day Key Blank (7 pin) $3.20

7270 Non-Published (restricted) Master Key Blank (7 pin) $3.40

Option Number XC SFIC

11 X7285B 4B Keyway - small format 7 Pin $5.44

6285B 4B - small format 6 pin $5.44

7285B 4B - small format 7 pin $5.44

Note: For anything not listed, consult factory

Consult Factory for Large Bow Keys.

CK-17

CYLINDERS & KEYING

SARGENT CUTKEYS/

COMPETITORS KEYWAYS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Cut Master Level/Change (Day) Keys

Number Description (provide key system registration # when ordering) Price Each

272MK Master Keys – 5 Pin

6272MK Master Keys – 6 Pin

7272MK Master Keys – 7 Pin

6250CMK Construction Master Key (22-) 6 pin

272CMK Construction Master Keys - 5 Pin (21-)

6272CMK Construction Master Key – 6 Pin (21-)

7272CMK Construction Master Keys - 7 Pin (21-)

6267EMK Emergency Key, Bored Locks – 6 Pin Key, 6 Pin System

7268EMK Emergency Key, Mortise Locks – 7 Pin Key, 6 Pin System

7269EMK Emergency Key, Removable Core, Hotel Function – 7 Pin Key, 6 Pin System

6272CTL 6 Pin Control Key for 6300s

6255CTL Control Key – 1 Bitted for 6300’s (63-) $9.00 Each

6253CTL Control Key (51-)

7253CTL Control Key – 7 Pin Key – 6 Pin System (51-)

272CHK Change (Day) Key - 5 Pin

6272CHK Change (Day) Key - 6 Pin

7272CHK Change (Day) Key - 7 Pin

6251CMK Temporary Construction Removable Core Master Key - 6 pin used with 64-11-64- and DG-64-

6251CTL Temporary Construction Removable Core Control Key - 6 pin used with 64-11-64 and DG-64-

6282BCMK Construction Interchangeable Core Master Key - 6 pin used with 72-

6254BCTL Construction Interchangeable Core Control Key - 6 pin used with 72-

7282BCMK Construction Interchangeable Core Master Key - 7 pin used with 11-72-

7254BCTL Construction Interchangeable Core Control Key - 7 pin used with 11-72-

Competitors Keyways

A selection of other manufacturer’s keyways are available. Consult optional substitutions in each product section for availability.

Not available for Hotel/Motel functions or factory master keyed.

Manufacturer Keyway Description Option Finish Price

Best See CK-8 See CK-8 See CK-8 See CK-8 See CK-8

Schlage*C 6 pin, 0 bitted SC- Per product NC

Schlage*E 6 pin, 0 bitted SE- Per product NC

*Mortise Cylinder size 41 ONLY and Rim Cylinder (#34) with SARGENT hold pattern. 2 each 6 Pin key blanks provided.

Option Cylinder No. Description 04/15

SC C10-1 SC Cylinder - 11, 10, 8L, 7L, 6500 Lever Lock x SC (Schlage C keyway)

SE C10-1 SE Cylinder - 11, 10, 8L, 7L, 6500 Lever Lock x SE (Schlage E keyway) $84.00

SC C480-1 SC Cylinder - 470, 480 (Schlage C keyway)

SE C480-1 SE Cylinder - 470, 481 (Schlage E keyway)

Option Cylinder No. Description 0

3/04/10/10BE/10B/26/26D/BSP/WSP

SC 41 Schlage C 6 pin, 0 bitted 41 mort cyl. only

SE 41 Schlage E 6 pin, 0 bitted 41 mort cyl. only $86.00

SC 34 Schlage C 6 pin, 0 bitted 34 rim cylinder

SE 34 Schlage E 6 pin, 0 bitted 34 rim cylinder

SARGENT hardware use SARGENT cylinders. SARGENT offers some competitor’s keyways for use on certain SARGENT

Hardware. These keyways are broached in barrels that are designed to operate in cylinders specific to SARGENT hardware.

Note: All competitor keyway cylinders are NOT available in Hotel Functions.

Note: On new master keyed systems, use keying cover sheets, removable and interchangeable core systems, and construction Master keyed

system orders, please specify quantity of master keys, control keys, and master construction keys required. If order does not give quantities of key

requirements, a minimum of 6 each master keys will be provided on new master keyed orders;1 each control key will be provided on new removable

core or interchangeable core jobs; 6 each construction master keys and 1 construction control key will be provided for construction keyed orders.

CK-18

KESO F1 SECURITY SYSTEM

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Keso F1 Security System Variations

Option Number Description Add to Set Price

F1 82 KESO F1 Security Cylinder $81.00 per Cylinder

F1 83 KESO F1 Security Removable Core Cylinders $115.00 per Cylinder

84 KESO Security Removable Construction Core Cylinders See Below

Above option numbers and price additions apply to 8 Line, 9 Line, 10 Line (82 Option only), Mortise Locks and Exit Devices only.

Above price additions include all keying charges. Consult individual product catalog for availability.

Extra Keys Extra Keys with locksets or cylinders $9.00 for extra key

Cut Keys

Option Number Description Price

F1 K372MK Master Key

F1 K372CHK Day Key

F1 K372CTL Removable Core Control or Emergency Key for all cylinder locks except 8G50 $11.00 Each

F1 K373EMK Emergency Key Mortise

F1 K374EMK Emergency Key for 8G50

KESO F1 cut keys are identified by the key number stamped on the bow of the key.

To place an order for cut keys, please be sure to include this number.

SARGENT will not be responsible for the function of the keys supplied using misidentified KESO F1 key numbers.

Please consult factory, if there are any questions, to verify that the stamp number is on file and to cross reference it to a

keyset symbol.

KESO TEMPORARY CONSTRUCTION CORE – Same for KESO F1 and KESO key systems

(84-) The customer will be invoiced at $57.50 NET/NET per construction core and the full invoice must be paid according to

SARGENT’s standard terms. No further discount will be applied. When construction cores are to be returned, the distributor must

contact Customer Service for an RGA. Once the construction cores are returned to SARGENT, SARGENT will issue a $55.50 credit

for each construction core returned from the specified project.

Number Description Price

355CMK Construction Day Key (84-) $11.00

355CTL Construction Control Key (84-)

Visual Key Control

Stamping of cylinder concealedand/or two keys with industry standard alpha numeric keyset symbol Add $8.00 /cyl.

Each additional key $1.00 /key

Note: On new master keyed systems, removable and interchangeable core systems, and construction Master keyed system

orders, please specify quantity of master keys, control keys, and master construction keys required. If order does not give

quantities of key requirements, a minimum of 6 each master keys will be provided on new master keyed orders; 1 each

control key will be provided on new removable core or interchangeable core jobs; 6 each construction master keys will be

provided for construction keyed orders.

KESO F1 KESO F1 codes are tightly controlled by the factory. End users signature required for

keys & cylinders. All keying and key cutting is performed in a factory secure area.

Note: KESO keys are not available Less Logo.

CK-19

KESO F1 SECURITY SYSTEM

CYLINDERS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

8 Line, 9 Line & 10 Line - KESO F1 Security Cylinders – For use in locks prepared for KESO F1 Specify Finish

Option Number Description 04/15

F182 C8-1 All 8, 9 Line Functions (except 50 Function) $165.00

F182 C8-2 8, 9 Line #50 Function $204.00

F182 C10-1 All 7, 10 Line Functions (except 50 Function) $165.00

F182 C11-1 All 11 Line Functions (except 50 Function)

8 Line & 9 Line - KESO F1 Security Removable Cylinder – For use in locks prepared for KESO Specify Finish

Option Number Description 04/15

F183 C8-1 $199.00

Rim - KESO F1 Security Cylinders Specify Finish

Option Number Description US03/04/09/10/10B/10BE/10BL/20D/26/26D/32/32D/BSP/WSP

F182 64 Rim Cylinder $167.00

Mortise - KESO F1 Security Cylinders Specify Finish

Option Number Description US03/04/09/10/10B/10BE/10BL/20D/32/32D/BSP/WSP

F182 71, 72, 73, 74, 76 Regular cam

F182 72-115, 73-115 Hotel cam $167.00

F182 71-105, 72-105, 73-105, 74-105, 76-105 Cam for i/s of 78/8216 or 92 functions

F182 71-101 Thru 76-101 Adams Rite 1850 cam

F182 71-113 Thru 76-113 Keyswitch cam $167.00

F182 71-106 Thru 76-106 Schlage L cam

Integra Lock Cylinders Specify Finish

Option Number Description US03/04/09/10/10B/10BE/10BL/20D/32/32D/BSP/WSP

F182 C7600-1 $206.00

F183 C7600-1 (Removable core) $240.00

Note: Mortise & Rim cylinders are available in US3, 4, 9, 10, 10B, 10BE, 10BL, 14, 15, 20D, 32, 32D, BSP, WSP finishes.

Cylinder plugs/barrels will be in either US4 or 15. Specify finish when ordering.

KESO F1 keysets are stamped on the cylinders in a concealed location.

For best results when ordering additional cylinders to the same keyset, please provide this stamped keyset on your order.

CK-20

KESO F1 SECURITY SYSTEM

CYLINDERS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Mortise Cylinders with Removable Cores Only (Not available for hotel functions)

Option Number Description Specify Finish

F183 172, 173, 174, 176 Regular offset cam only

F183 172-105, 173-105, 174-105, 176-105 Short cam (For 8216 & 8292 Lock Functions – Inside Cyl.) $201.00

F183 172-101 thru 176-101 Adams Rite cam (MS1850) $201.00

Removable Core Only – For Mortise Cylinders

Option Number Description Specify Finish

F1 5172, 5173, 5174, 5176 Regular offset cam

F1 5172-105, 5173-105, 5174-105, 5176-105 Short Cam (For 8216 & 8292 Lock Functions – Inside Cyl.) $115.00

F1 5172-101 thru 5176-101 Adams Rite Cam (MS1850) $115.00

Rim Cylinders with Removable Core

Option Number Description Specify Finish

F183 164 Rim Cylinder $201.00

Removable Core Only – For Rim Cylinders

Option Number Description Specify Finish

F1 5164 Rim Cylinder $115.00

KESO Cylinder Cams

Number Description Specify Finish

13-2563 For use with SARGENT KESO F1 cylinders

71 thru 76 and 172 thru 176. All functions except 50 $4.79

13-2283 For use with 50 Lock Function. $24.52

13-2522 For use on inside cylinder of 78/8216 or 92 Function $9.09

Note: Mortise & Rim cylinders are available in US3, 4, 9, 10, 10B, 10BE, 10BL, 14, 15, 20D, 32, 32D, BSP, WSP finishes.

Cylinder plugs/barrels will be in either US4 or 15. Specify finish when ordering.

Mortise/Rim Removable Core Cylinder - Housings ONLY, crews and back plate to be ordered separately.

Mortise/Rim Removable Core Cylinder - Housings ONLY, screws and back plate to be ordered separately.

Number Description Price

072, 073, 074, 076 - Mortise Housing only $87.00

*064 - Rim Housing only

* screws (part #13-0074 -2 required) and back plate (part #13-0086) - 1 required)

Removable Construction Core ONLY - for Mortise/Rim Cylinders

Mortise Price

5472, 5473, 5474, 5476 - for Mortise type cylinder

5472-105, 5473-105, 5474-105, 5476-105 - for Mortise type cylinder x short offset cam

5472-101, 5473-101, 5474-101, 5476-101 - for Mortise type cylinder x Adams Rite Cam(MS1850) $115.00

5464 - for Rim type cylinder

CK-21

KESO F1 SECURITY SYSTEM

UL LISTED CYLINDERS/CAMS/PADLOCKS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

UL Listed KESO F1 Security Cylinders Price

Option Number Description 10/26/26D

F1 4252 Utility Lock – Flat Cam $236.00

F1 4252-2 Utility Lock – Offset Cam $236.00

F1 4253 Switch Lock – Available in 26 Finish Only $300.00

F1 4264 Rim Cylinder $184.00

F1 4271, 4272,4273,4274,4276 Mortise Cylinder $184.00

F1 4271-106 $206.00

Cam

Number Description Price

13-2563 Regular offset cam $4.79

13-2283 Hotel cam (-115) $24.52

13-2522 Short offset cam (-105) $9.09

13-2521 Adams Rite MS 1850 cam (-101)

13-2519 Key Switch $16.46

13-0939 Schlage L cam (-106)

16-0129 4152 Cam $3.80

16-0146 4152-2 Cam $9.60

Utility Locks Price

Option Number Description 03/04/10/26/26D

F1 4152 Flat cam $214.00

F1 4152-2 Offset cam

Switch Lock Price

Option Number 26

F1 4153 $279.00

Miscellaneous Qty. Per Bag Price Each

13-0080 Rim Cylinder Plug Retaining Ring 25 $1.48

13-0085 Flat Tail Piece 25

Padlocks

1" Shackle Standard, For 2.5", add -2 as suffix, For 4", add -4 as suffix Specify Finish

Option Number Description (04 only)

F182 856 Key can be removed while in the unlocked position Stainless Shackle

F182 857 Key Removable in Locked Position Only

F182 856C Stainless Shackle with 9" chain

F182 857C Key retaining"" Key Removable in Locked Position Only with 9" chain

F182 856HS Hardened Steel Shackle $191.00

F182 857HS Hardened Steel Shackle Key Removable in Locked Position Only

F182 856HSC Hardened Steel Shackle with 9” chain

F182 857HSC Hardened Steel Shackle with 9” chain Key Removable in

Locked Position Only

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

CK-22

KESO F1 SECURITY SYSTEMS

CYLINDERS

Type of Repair List Price

SARGENT Error No Charge

Pin Wear within 1-yr guarantee No Charge

Pin Wear outside guarantee Price of new cylinder

Field Misuse Price of new cylinder

Note: Out of warranty repair requests must be accompanied with a purchase order covering repair charges.

Repair product should be sent via a trackable carrier to:

SARGENT Manufacturing Company

P.O. Box 9725

100 Sargent Drive

New Haven, CT 06536

ATTN: KESO F1 Security Service Center

The following charges will apply for cylinders sent to the Service Center for repair.

Guarantee

The SARGENT KESO F1 Cylinders are guaranteed for a period of one year from date of installation against defective

workmanship, material or wear.

This guarantee is based on all items being installed in accordance with templates and installation instructions, and does not

include products damaged as a result of misapplication or vandalism.

CK-23

KESO SECURITY SYSTEM

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Keso Security System Variations

Option Description Add to Set Price

82 KESO Security Cylinder $81.00 per Cylinder

83 KESO Security Removable Core Cylinders $115.00 per Cylinder

84 KESO Security Removable Construction Core Cylinders See Below

Above option numbers and price additions apply to 8 Line, 9 Line, 10 Line (82 Option only),

Mortise Locks and Exit Devices only. Above price additions include all keying charges.

Extra Keys with locksets or cylinders $9.00 for extra key

Cut Keys

Number

372MK Master Key

372CHK Day Key

372CTL Removable Core Control or Emergency Key for all cylinder locks except 8G50 $11.00 Each

373EMK Emergency Key

374EMK Emergency Key for 8G50

Keyblanks Keys

Number Price Per Box

375 Control Keyblank $5.00 /ea. 25

376 Master and Change Keyblank $5.00 /ea. 25

KESO cut keys are identified by the key number stamped on the bow of the key.

To place an order for cut keys, please be sure to include this number.

SARGENT will not be responsible for the function of the keys supplied using misidentified KESO key numbers.

Please consult factory, if there are any questions, to verify that the stamp number is on file and to cross reference it to a

keyset symbol.

KESO TEMPORARY CONSTRUCTION CORE

(84-) The customer will be invoiced at $57.50 NET/NET per construction core and the full invoice must be paid according to

SARGENT’s standard terms. No further discount will be applied. When construction cores are to be returned, the distributor must

contact Customer Service for an RGA. Once the construction cores are returned to SARGENT, SARGENT will issue a $55.50 credit

for each construction core returned from the specified project.

Number Description Price

355CMK Construction Key $11.00

355CTL Construction Control Key

Note: On new master keyed systems, removable and interchangeable core systems, and construction Master keyed system

orders, please specify quantity of master keys, control keys, and master construction keys required. If order does not give

quantities of key requirements, a minimum of 6 each master keys will be provided on new master keyed orders; 1 each

control key will be provided on new removable core or interchangeable core jobs; 6 each construction master keys will be

provided for construction keyed orders.

KESO KESO codes tightly controlled by the factory, end users signature required for

keys & cylinders. All keying and key cutting performed in a factory secure area.

Available for existing systems only.

Note: KESO keys and keyblanks are not available Less Logo.

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

8 Line, 9 Line & 10 Line - Keso Security Cylinders – For use in locks prepared for KESO Specify Finish 04/15

Option Number Description Price

82 C8-1 All 8, 9 Line Functions (except 50 Function) $165.00

82 C8-2 8, 9 Line #50 Function $204.00

82 C10-1 All 7, 10 Line Functions (except 50 Function) $165.00

82 C11-1 All 11 Line Functions (except 50 Function)

8 Line & 9 Line - Keso Security Removable Cylinder – For use in locks prepared for KESO Specify Finish 04/15

Option Number Description Price

83 C8-1 $199.00

Rim - Keso Security Cylinders US03/04/09/10/10B/10BE/10BL/20D/32/32D/BSP/WSP

Option Number Description Price

82 64 Rim Cylinder $167.00

Mortise - Keso Security Cylinders US03/04/09/10/10B/10BE/10BL/20D/32/32D/BSP/WSP

Option Number Description Price

82 71, 72, 73, 74, 76 Regular cam

82 72-115, 73-115 Hotel cam $167.00

82 71-105, 72-105, 73-105, 74-105, 76-105 Cam for i/s of 78/8216 or 92 functions

82 71-101 Thru 76-101 Adams Rite 1850 cam $167.00

82 71-113 Thru 76-113 Key Switch $167.00

82 71-106 Thru 76-106 Schlage L cam $167.00

Integra Lock Cylinders 03/04/09/10/10B/10BE/10BL/14/15/20D/26/26D/32/32D/BSP/WSP

Option Number Description Price

82 C7600-1 $206.00

83 C7600-1 (Removable core) $240.00

Note: Mortise & Rim cylinders are available in US3, 4, 9, 10, 10B, 10BE, 10BL, 14, 15, 20D, 32, 32D, BSP, WSP finishes.

Cylinder plugs/barrels will be in either US4 or 15. Specify finish when ordering.

KESO keysets are stamped on the cylinders in a concealed location.

For best results when ordering additional cylinders to the same keyset, please provide this stamped keyset on your order.

CK-24

KESO SECURITY SYSTEM

CYLINDERS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

CK-25

KESO SECURITY SYSTEM

CYLINDERS

Mortise Cylinders with Removable Cores Only (Not available for hotel functions)

Option Number Description Price

83 172, 173, 174, 176 Regular offset cam only

83 172-105, 173-105, 174-105, 176-105 Short cam (For 8216 & 8292 Lock Functions – Inside Cyl.) $201.00

83 172-101 Thru 176-101 Adams Rite cam (MS1850) $201.00

Removable Core Only – For Mortise Cylinders Price

Option Number Description 04/15

5172, 5173, 5174, 5176 Regular offset cam

5172-105, 5173-105, 5174-105, 5176-105 Short Cam (For 8216 & 8292 Lock Functions – Inside Cyl.) $115.00

5172-101 thru 5176-101 Adams Rite Cam (MS1850) $115.00

Rim Cylinders with Removable Core Price

Option Number Description 03/04/09/10/10B/10BE/10BL/20D/26/26D/32/32D/BSP/WSP

83 164 Rim Cylinder $201.00

Removable Core Only – For Rim Cylinders Price

Option Number Description 04/15

5164 Rim Cylinder $115.00

Mortise/Rim Removable Core Cylinder - Housings ONLY

Option Number Description Price

072, 073, 074, 076 - Mortise Housing only $87.00

*064 - Rim Housing only

* screws (part #13-0074 -2 required) and back plate (part #13-0086) - 1 required)

Removable Construction Core ONLY - for Mortise/Rim Cylinders

Mortise Price

5472, 5473, 5474, 5476 - for Mortise type cylinder

5472-105, 5473-105, 5474-105, 5476-105 - for Mortise type cylinder x short offset cam $115.00

5472-101, 5473-101, 5474-101, 5476-101 - for Mortise type cylinder x Adams Rite Cam(MS1850)

5464 - for Rim type cylinder

Note: Mortise & Rim cylinders are available in US3, 4, 9, 10, 10B, 10BE, 10BL, 14, 15, 20D, 32, 32D, BSP, WSP finishes.

Cylinder plugs/barrels will be in either US4 or 15. Specify finish when ordering.

KESO Cylinder Cams

Option Number Description Price

13-2563 For use with SARGENT KESO cylinders 71 thru 76 and

72 thru 176. All functions except 50 $4.79

13-2283 For use with 50 Lock Function. $24.52

13-2522 For use on inside cylinder of 78/8216 or 92 Lock Function $9.09

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

UL Listed Keso Security Cylinders Price

Option Number Description 10/26/26D

4252 Utility Lock – Flat Cam $236.00

4252-2 Utility Lock – Offset Cam $236.00

4253 Switch Lock – Available in 26 Finish Only $300.00

4264 Rim Cylinder $184.00

4271, 4272,4273,4274,4276 Mortise Cylinder $184.00

4271-106 $206.00

Cam

Number Description Price

13-2563 Regular Offset Cam $4.79

13-2283 Hotel Cam (-115) $24.52

13-2522 Short Offset Cam (-105) $9.09

13-2521 Adams Rite MS 1850 Cam (-101)

13-2519 Key Switch Clover Leaf Cam for 4370 Series $16.46

13-0939 Schlage L Cam (-106)

16-0129 4152 Cam $3.80

16-0146 4152-2 Cam $9.60

Utility Locks

Option Number Description 03/04/10/26/26D

4152 Flat cam $214.00

4152-2 Offset cam

Switch Lock 26

4153 $279.00

Miscellaneous Qty. Per Bag Price Each

13-0080 Rim Cylinder Plug Retaining Ring 25 $1.48

13-0085 Flat Tail Piece 25

Padlocks

1" Shackle Standard, For 2.5", add -2 as suffix, For 4", add -4 as suffix Finish

Option Number (04 Only)

82 856 Key can be removed while in the unlocked position Stainless Shackle

82 857 Key Removable in Locked Position Only

82 856C Stainless Shackle with 9" chain

82 857C “Key retaining” Key Removable in Locked Position Only with 9" chain

82 856HS Hardened Steel Shackle $191.00

82 857HS Hardened Steel Shackle Key Removable in Locked Position Only

82 856HSC Hardened Steel Shackle with 9” chain

82 857HSC Hardened Steel Shackle with 9” chain Key Removable in

Locked Position Only

CK-26

KESO SECURITY SYSTEM

UL LISTED CYLINDERS/CAMS/PADLOCKS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

CK-27

KESO SECURITY SYSTEMS

CYLINDERS

Guarantee

The SARGENT KESO Cylinders are guaranteed for a period of one year from date of installation against defective

workmanship, material or wear.

This guarantee is based on all items being installed in accordance with templates and installation instructions, and does not

include products damaged as a result of misapplication or vandalism.

The following charges will apply for cylinders sent to the Service Center for repair.

Type of Repair List Price

SARGENT Error No Charge

Pin Wear within 1-yr guarantee No Charge

Pin Wear outside guarantee Price of new cylinder

Field Misuse Price of new cylinder

Note: Out of warranty repair requests must be accompanied with a purchase order covering repair charges.

Repair product should be sent ADD to :

SARGENT Manufacturing Company

P.O. Box 9725

100 Sargent Drive

New Haven, CT 06536

ATTN: KESO Security Service Center

Signature cylinders have the Signature Quill Logo embossed on the face of the cylinder barrel. Signature keys have SARGENT

embossed on one side and the Signature Quill Logo, specific Signature code pattern and one additional line for stamping. Key

blanks are also available blank one side. Consult the Signature catalog for more specific details. Please contact the factory for

keyways available.

Please Note:

Signature products require a special ordering procedure. Please be sure that you include the following

information when you send your order to Sargent for processing:

1. Keying Cover Sheet

2. Signature Cover Sheet with complete end user information and distributor information

3. Pin Coded/Letter of authorization from end user

Missing or incomplete information will cause delay in processing and may result in the return of your order.

Forms may be obtained by contacting Sargent Customer Service at (800) 727-5477.

Signature Option (To be added to all applicable products, except where noted) Price

10- Signature System* Add $56.00 /cyl

Keying Charges & Substitutions

Masterkeying charge is included in price of Removable Core cylinder (Option 10-63-)

Double cylinder locks - Double below charges when purchased with locksets or exit devices

Masterkeying or Higher level of keying, any quantity Add $16.00 /cyl.

Masterkeying or Higher level of keying, any quantity, cylinders only

Construction Masterkeying with lockset or exit devices (Option 21-)

Construction Masterkeying with lockset or exit devices, cylinders only (Option 21-)

Keys

Option Number Description

10 S6272MK Masterkey and/or Grandmasterkey

10 S6272CMK Construction Masterkey $12.00 /key

10 S6272CTL Control Key – 6 Pin

10 S6272CHK Change (Day) Key – 6 Pin

Extra Keys (Cylinders are packed standard with 2 keys each)

For each extra day key ordered with lockset, exit device or cylinder $9.00 /key

Keys packed separately (indicate appropriate “Ship To” address on keying cover sheet) Add $3.00 /cyl.

Keyblanks 50 Keys/Box. Must order multiple of 50 keys.

Composite master sections 6 Pin 10-S6270 $6.20 / key

Composite master sections 6 Pin 10-S6270 Unpublished restricted $7.00 / key

Single change/day sections 6 Pin 10-S6275 $6.20 / key

Single change/day sections 6 Pin 10-S6275 Unpublished restricted $7.00 / key

Key Marking (Special marking is limited to space on blank side of keyblank)

Stamping letters or numerals on key bow - add per each letter or numeral Add $1.00 /num

“Do Not Duplicate” or other stamps on file at Sargent No Addition

Where new special stamping is required i.e., “State of Alaska - Do Not Duplicate” Add $840.00 /die

Keys stamped from this special die on first order only Add $4.00 /key

Visual Key Control (When ordered with non-Signature product, the following applies to all)

Signature Keys include visual key control (keys are stamped, cylinder face can not be stamped) N/C

Non-Signature product requiring visual key control when ordered with Signature product See CK-3

Concealed stamping of Rim or Mortise slide Add $8.00

Concealed stamping of 10-6300 slide Add $8.00

Note: VKC not available with Signature plugs

Delete SARGENT Logo

To delete SARGENT Logo from Keys – N/A for IC, XC, KESO Consult factory for

To delete SARGENT Logo from Extra Keys additional cost

To delete SARGENT Logo from SARGENT Mortise & Rim Cylinders and leadtime

*Note: Available in the following Sargent keyway families – L, R

Refer to CK-3 for pricing and prior authorization requirements.

CK-28

SIGNATURE SERIES

CYLINDERS & KEYING

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

CK-29

SIGNATURE SERIES

REMOVABLE CORE

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Removable Core Cylinder (The Signature option add has already been included) Price

Number Specify Finish

10-6334, 10-6342, 10-6343, 10-6344, 10-6346 6 Pin only $216.00

Removable Cores Only (The Signature option add has already been included) Price

Assembled Specify Finish

10-6300 For All Except 50 Function $130.00

NOTE: 65- unassembled is not available with Signature cores. Available 1-bitted only.

*Mortise Cylinders with following Cams Price

101 For Adams Rite – 1850, 4700

105 Sargent Short Cam - for inside of 78/8216 & 92 functions

106 For Schlage L No Addition

112 “Open” Misc. Wide Straight Cam

113 For 4370 Key Switch

* Cams must be ordered with cylinders – permanently attached at the factory

Note: Construction Cores are available. Refer to CK-2 for Policy & Pricing.If ordering in “C” or “H” and or “G” keyway family,

please consult factory.

Parts Price

13-0985 Blocking Bar (Old Style) $6.71

13-1109 Blocking Bar (New Style) $17.42

13-0986 Blocking Bar Spring $0.09

13-0977 Body for 10-6300 $35.76

13-0797 Slide for 6300 made before 3/06 with box logo (Price/pack - 100 slides) $37.94

13-0976 Barrel for 10-6300 $90.74

13-1074 Sleeve for 6300 & 10-6300 $0.65

13-1341 Slide for 6300 made after 3/06 (Price/pack - 100 slides) $37.94

437S Signature Re-keying Kit $821.00

437RC Re-keying Kit (Conventional & Signature) for removable Cores used in factory

master keyed cylinders before January 2009 $386.00

13-1037 Loading Rod Blade (Signature) $13.38

13-1138 Loading Rod Blade (Signature) $13.38

18-0070 Cylinder Spray Lube $25.57

18-0435 Cylinder Cleaner/De-Icer $25.57

Signature Cylinder Pins (Optional for 437RC kit)

Stainless Steel pins for Protected Signature Cylinders

Price/Pack

Part. No. Size (25 Pins)

13-1210 1

13-1211 2

13-1212 3

13-1213 4

13-1214 5

13-1215 6

13-1216 7

13-1217 8

13-1218 9

13-1222 B-Driver

13-1223 C-Driver

For Sargent 6300 Removable Core & Signature

Removable Core—for 3rd & 4th positions: Price/Pack

Part. No. Hollow Drivers Size (100 Pins)

13-1229 3 $43.00

13-1234 4

13-1235 5

13-1236 6

13-1237 7

13-1238 8

13-1239 9

13-1240 10

For Sargent 6300 Removable Core & Signature

Removable Core—Parts: Price/Pack

Part. No. Miscellaneous (100 rings)

13-0487 Hollow Driver Springs used in the $84.18

3rd and 4th chambers of factory

keyed cores prior to 1/1/09

01-0660 Retaining Ring $84.18

Note: Mortise & Rim cylinders are available in US3, 4, 9, 10, 10B, 10BE, 10BL, 20D, 32, 32D, BSP, WSP finishes.

Cylinder plugs/barrels will be in either US4 or 15. Specify finish when ordering.

$84.00

(Order in

multiples

of 25)

$24.00

(Order in

multiples

of 100)

CK-30

SIGNATURE SERIES

MORTISE & RIM CYLINDERS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Mortise Cylinder 6 Pin(The Signature add is included)

Number Specify Finish Price

10-41, 10-42, 10-43, 10-44, 10-46 $142.00

10-48, 10-50, 10-52, 10-54 $181.00

10-56 $363.00

Note: Price does not include Masterkeying

Mortise Cylinders with following:

Cam No. Price

101 For Adams Rite 1850, 4700

106* For Schlage “L” No

112 “Open” Misc. - Wide Straight Cam Addition

113 For 4370 Key Switch Coverleaf Cam

Mortise Cylinder (10-40 Series) Plug & Sidepin

Ass’y Specify Finish Price

13-3835 41

13-3836 42

13-3837 43 $98.36

13-3838 44

13-3839 46

13-3840 48

13-3841 50

13-3842 52 $116.27

13-3843 54

13-3844 56

Mortise Cylinder (10-40 Series) Bodies

Number Specify Finish Price

13-3726 41

13-3727 42

13-3728 43 $53.11

13-3729 44

13-3730 46

13-3731 48

13-3732 50

13-3733 52 $76.55

13-3734 54

13-3735 56

Rim Cylinder Price

10-34 $142.00

Note: Price does not include Masterkeying

Rim Cylinder (10-34 Series) Plug & Sidepin Ass’y Price

Specify Finish

13-3845 6 Pin $98.36

Note: Price does not include Masterkeying

Rim Cylinder (10-34 Series) Cylinder Body Price

Specify Finish

13-3847 6 Pin $48.63

Note: Mortise & Rim cylinders are available in US3, 4, 9, 10, 10B, 10BE, 10BL, 20D, 32, 32D, BSP, WSP finishes.

Cylinder plugs/barrels will be in either US4 or 15. Specify finish when ordering.

CK-31

SIGNATURE SERIES

BORED LOCK CYLINDERS & PARTS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

11 Line Cylinder Assemblies

Option Number Specify Finish US4 or 15 Price

10 C11-1 For all Except 50 Function $140.00

10, 8L, 7L, 6500 Lever Cylinder Assemblies

Option Number Specify Finish US4 or 15 Price

10 C10-1 For all Except 50 Function $140.00

8, 9 Knob Line Cylinder Assemblies

Option Number Specify Finish US4 or 15 Price

10 C8-1 For all Except 50 Function $140.00

8X Knob Line Cylinder Assemblies

Option Number Specify Finish US4 or 15 Price

10 C8X-1 For all Except 50 Function $140.00

6 Line Cylinder Assemblies

Option Number Specify Finish US4 or 15 Price

10 C6-1 6 Pin (S and N Knobs) For All Except 50 Function

10 C6-1B 6 Pin (B Knob) For All Except 50 Function $140.00

Auxiliary Locks Cylinder Assemblies

Option Number Specify Finish US4 or 15 Price

10 C480-1 474, 484

10 C480-2 485, 487

10 C480-3 475, 486 $140.00

10 C460-1 464

10 C460-2 465

10 C750-1 758, 858

Note: Above Cylinder Assembly prices do not include masterkeying.

7600 Integralock Cylinders (All functions except 26, 27, and 50)

Option Part # Specify Finish US4 or 15 Price

10 *C7600-1 Signature $181.00

10-21 *C7600-1 Construction & Signature $213.00

Bored Lock Cylinder Plug & Sidepin Assemblies

Plug No. Specify Finish US4 or 15 Price

13-3851 For 8L, 10, 11, 6500, 6L Lever Lines

13-3850 For 8, 9 Knob Lines $98.36

13-3849 For 460, 480 Series

Bored Lock Cylinder Body

Cyl. Body No. Price

13-3710 For 6L, 8L, 10, 11, 6500 Lever Lines

13-3852 For 8, 9 Knob Lines $49.18

13-3854 For 460/480 Series

CK-32

CYLINDERS & KEYING

DEGREE™KEY SYSTEM

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

DG1 Patented Degree DG1 Key System No Addition

DG160 Hardware prepared for DG1-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No addition

DG163 Patented Degree DG1 Large Format Interchangeable Core Cylinder - Includes master keying charges $74.00

DG164 Hardware prepared for DG1-6300 Lg. Format IC cores, supplied with temporary keyed construction cores $74.00

DG2 Patented Degree DG2 Key System incorporating a locking sidebar $56.00/cyl.

DG260 Hardware prepared for DG2-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No addition

DG263 Patented Degree DG2 Large Format Interchangeable Core Cylinder - Includes master keying charges $130.00

DG264 Hardware prepared for DG2-6300 Lg. Format IC cores, supplied with temporary keyed construction cores $74.00

DG3 Patented Degree DG3 Key System incorporating a locking sidebar and UL437 listed $79.00/cyl.

DG360 Hardware prepared for DG3-6300 Lg. Format IC cores, supplied with temporary plastic construction cores No addition

DG363 Patented Degree DG3 Large Format Interchangeable Core Cylinder - Includes master keying charges $153.00

DG364 Hardware prepared for DG3-6300 Lg. Format IC cores, supplied with temporary keyed construction cores $74.00

Notes: Available in Large Format Interchangeable Core (LIFC).

Keyway Family Available: T

SARGENT keyway family: T

Prior authorization from SARGENT key records is required before establishing new key system.

Keying Charges Add/Cylinder

Masterkeying or Higher level of keying, any quantity (Except LFIC)

Masterkeying or Higher level of keying, any quantity, cylinder only $16.00

Construction Masterkeying (21-) with cylinders only

Construction Masterkeying (21-) with lockset or exit device or cylinder

Note: Multiple cylinder function locks - Add charges accordingly per cylinder.

Visual Key Control

Stamping of keyset number and file number on Master keys standard No Charge

Concealed stamping code (Keyset Symbol) on bored, mortise or rim cylinder slide $8.00

Concealed stamping of DG1, 2, 3 cores slide $8.00

Key Marking – Special marking is limited to space on blank side of key blank. Two lines maximum Consult factory

Degree Key System - Option (to be added to all applicable products, except where noted in product catalogs)

Options Description Add

DG1 DG6272MK Master Keys DG1

DG1 DG6272CTL Control Key for 6300s DG1 $9.00

DG1 DG6272CMK Construction Masterkey (21-) DG1

DG1 DG6272CHK Change (Day) Key DG1

DG2 DS6272MK Master Keys DG2

DG2 DS6272CTL Control Key for 6300s DG2 $16.00

DG2 DS6272CMK Construction Masterkey (21-) DG2

DG2 DS6272CHK Change (Day) Key DG2 & DG3

DG3 DS6272MK Master Keys DG3 $16.00

DG3 DS6272CTL Control Key for 6300s DG3

Cut Master Type Keys

Option Number Description Price Each

DG1 DG6267EMK Bored locks

DG1 DG7268EMK Mortise locks $9.00

DG1 DG7269EMK 63- cylinders in mortise locks

Emergency Master Keys Price Each

6251CMK Construction Masterkey DG1, DG2, DG3 (64-) $9.00

6251CTL Construction Control Key DG1, DG2, DG3 (64-)

Construction Keys DG1, DG2, DG3

DG1 DG6275 TA, TB, TC, TE, TF, TG, TJ, TK, TL – DG1 $3.00

DG2 DS6275 TA, TB, TC, TE, TF, TG, TJ, TK, TL – DG2/DG3 $5.50

DG3 DS6275 TA, TB, TC, TE, TF, TG, TJ, TK, TL – DG3 $5.50

DG1 DG6270 TD, TH, TM, TDH, THM, TN – DG1 $3.00

DG2 DS6270 TD, TH, TM, TDH, THM, TN – DG2/DG3 $5.50

DG3 DS6270 TD, TH, TM, TDH, THM, TN – DG3 $5.50

Change Keyblanks – Packed 50 per Box Keyway Families Available

Options Number Description Price Each

DG1 For each extra key ordered with locksets, exit devices or cylinders $5.00 per key

DG2 For each extra key ordered with locksets, exit devices or cylinders $9.00

DG3 For each extra key ordered with locksets, exit devices or cylinders $9.00

For keys packed separately $4.00 per cyl.

Extra Keys – Cylinders are packed standard with 2 keys each Add

Two (2) cut change keys are provided per lockset or cylinder at no charge. Keyblanks cannot be substituted for cut

keys. Double cylinder lockset when keyed alike on both sides receives 2 keys per lock.

Master Keyblanks – Sold Packed 50 per Box Keyway Families Available

The SARGENT Degree utility, patented locking system meets the security objective for all the openings in a facility with any level of

physical security desired. Degree offers three levels of security, all operated by one key, easing the administration of keys and blanks.

Not compatible with existing Sargent key system.

CK-33

CYLINDERS & KEYING

DEGREE™KEY SYSTEM

DG1 MORTISE, RIM, BORED LOCK, DEADBOLTS,

INTEGRALOCK, AND PADLOCK CYLINDERS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

DG1 34 $86.00

DG1 41, 42, 43, 44, 46 $86.00

Note: Price does not include Masterkeying

DG1 Rim and Mortise Cylinder 6 Pin

Option Specify finish when ordering Price

101 For Adams Rite 1850, 4700

105 Sargent Short Cams I/S 78/82/16/92 functions

106 For Schlage "L" No Addition

113 For 4370 Key Switch Coverleaf Cam

112 "Open" Misc. – Wide Straight Cam

Mortise Cylinders with following suffix cam number

DG1-78 42, 43, 44 $115.00

Degree Series Mortise Cylinders, Exposed Barrel Only Specify Finish

When Ordering

Option Price

DG1 50-43/50-44 Hotel Cylinder (7850, 7950, 8250 only) $115.00

DG1 Hotel Type Mortise Cylinders – Consult Factory for existing system compatibility Price

Note: Mortise & Rim cylinder housings include #97 Rossette are available in the following finishes: 3, 4, 9, 10, 10B, 10BE, 10BL, 14, 15, 20D,

26, 26D, BSP, WSP. Bored Cylinder Assemblies, cylinder plugs/barrels are available in the following finishes: 4, 15.

*DG1 C11-1 T-Zone cylinder - all functions except 50 function $84.00

*DG1 C11-2 11 Line 50 function $123.00

*DG1 C10-1 10, 7L, & 6500 lever lock cylinder- all functions except 50 function $84.00

*DG1 C10-2 10 Line 50 function $105.00

7L, 8L, 8XL & 9L Knob Lock Cylinder Assemblies and Components

*DG1 C8-1 7, 8, 9 Knob Locks - all functions except 50 function $84.00

*DG1 C8-2 8L Knob Locks - 50 function $123.00

DG1 C8X-1 8X Knob Lock - All except 50 function $84.00

6L Knob Lock Cylinder Assemblies and Components

*DG1 C6-1 6 Line knob lock (S & N knobs) - all functions except 50 function $84.00

*DG1 C6-1B 6L Knob Lock cylinder (B knob) - all functions except 50 function

460/470/480 Cylinder Assemblies and Components

DG1 C460-1 464 cylinder

DG1 C460-2 465 cylinder

DG1 C480-1 474, 484 cylinder $84.00

DG1 C480-2 485, 487

DG1 C480-3 475, 486 cylinder

7600 Integralock Cylinder Assemblies and Components

*DG1 C7600-1 7600 Integra functions 04, 05, & 37 $125.00

758/858 Padlock Cylinder Assemblies and Components

*DG1 C750-1 758, 858 cylinder $84.00

Miscellaneous Components Price per pack (100 springs per pack)

DG-0017 Compression spring for all cylinders $35.00

T-Zone (11Line) and 10L Cylinder Assemblies

Option Number Description Price

DG1 Conical Bottom Pins

Part No. Size Price

DG-0021 1

$16.00

DG-0022 2

DG-0023 3

DG-0024 4

DG-0025 5

DG-0026 6

Bump-Resistant Driver Pin

Part No. Size Price

DG-0031 1

$16.00

DG-0032 2

DG-0033 3

DG-0034 4

DG-0035 5

DG-0036 6

DG1 Master Wafers

Part No. Size Price

DG-0051 1

$8.00

DG-0052 2

DG-0053 3

DG-0054 4

DG-0055 5

CK-34

CYLINDERS & KEYING

DEGREE KEY SYSTEM

DG1 LARGE FORMAT IC CORE RIM & MORTISE CYLS.

DG2 MORTISE & RIM CYLINDERS

DG1 DG6272CTL Control key $9.00

DG1 DG6272MK Masterkey

Cut Master Keys

Options Number Description Price Each

DG1-60 Degree DG1 Large Format Interchangeable Plastic Disposable Construction Core No addition

DG1-63 Degree DG1 Large Format Interchangeable Core Cylinder - includes masterkeying charges $74.00

DG1-64 Degree DG1 Large Format Interchangeable Construction Core Cylinder $74.00

Note: Price includes Masterkeying

DG1-6300 Series Large Format Interchangeable Core (LFIC) Cylinders

Option Description Price

101 For Adams Rite 1850, 4700

105 Sargent Short Cams I/S 78/82 (16 & 92) functions

106 For Schlage "L" No Addition

113 For 4370 Key Switch Coverleaf Cam

112 "Open" Misc. – Wide Straight Cam

Note: *Cams must be ordered with cylinders – permanently attached at the factory.

*Cylinders with following Cams

Cam No. Description

DG1-63 34, 42, 43, 44, & 46 - 6 Pin Only $160.00

DG1-63-50 43 & 44 - Hotel type Mortise cylinder $189.00

Degree DG1 LFIC Mortise & Rim Cylinders - Includes Master & Grand Master Keying Charges Specify Finish

Number Cylinder Size Price

DG1-6300 6-Pin only $74.00

Degree DG1 LFIC ONLY - Includes Master & Grand Master Keying Charges Specify Finish

Number Cylinder Size Price

DG1-65-6300 6-Pin only $57.00

Degree DG1 LFIC ONLY - Unassembled Specify Finish

Number Cylinder Size Price

DG1-60 34, 42, 43, 44, & 46 - 6 Pin Only $86.00

DG1-60-50 43 & 44 - Hotel type Mortise cylinder $115.00

Degree DG1 LFIC Mortise & Rim body only Specify Finish

Number Cylinder Size Price

DG2 34 $142.00

DG2 41, 42, 43, 44, 46

Note: Price does not include Masterkeying

DG2 Rim and Mortise Cylinder 6 Pin

Option Specify finish when ordering Price

101 For Adams Rite 1850, 4700

105 Sargent Short Cams I/S 78/82/16/92 functions

106 For Schlage "L" No Addition

113 For 4370 Key Switch Coverleaf Cam

112 "Open" Misc. – Wide Straight Cam

Mortise Cylinders with following suffix cam no.

DG2-78 41, 42, 43 $171.00

Degree Series Mortise Cylinder Specify

Exposed Barrel Only Finish

Number Size Price

Degree DG1 Large Format Interchangeable Core Cylinders

Note: Mortise & Rim cylinder housings include #97 Rossette are available in the following finishes: 3, 4, 9, 10, 10B, 10BE, 10BL,

14, 15, 20D 26, 26D, BSP, WSP. Bored Cylinder Assemblies, cylinder plugs/barrels are available in the following finishes: 4, 15.

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

CK-35

CYLINDERS & KEYING

DEGREE KEY SYSTEM

DG2 BORED LOCK, DEADBOLTS, INTEGRALOCK,

AND PADLOCK CYLINDERS

DG2 LARGE FORMAT IC CORE CYLINDERS

Price Book No. 31 | May 1, 2018

DG2 C11-1 T-Zone cylinder - all functions except 50 function $140.00

DG2 C10-1 10, 8L, 7L, 6500 lever lock cylinder- all functions except 50 function

DG2 Degree Level Specify

T-Zone (11 Line), 10L, 8L, 7L, 6L, 6500 Lever Lock Cylinder Assemblies and Components Finish

Option Description Price

DG2 C8-1 7, 8, 9 Knob Locks - all functions except 50 function" $140.00

DG2 C8X-1 Cylinder – 8X Knob Locks

7L, 8L, & 9L Knob Lock Cylinder Assemblies and Components

Option Description Price

DG2 C6-1 6 Line knob lock (S & N knobs) - all functions except 50 function $140.00

DG2 C6-1B 6L Knob Lock cylinder (B knob) - all functions except 50 function

6L Knob Lock Cylinder Assemblies and Components

Option Description Price

DG2 C750-1 758, 858 cylinder $140.00

758/858 Padlock Cylinder Specify

Assemblies and Components Finish

Number Size Price

DG2 C7600-1 7600 Integra functions 04, 05, & 37 $181.00

7600 Integralock Cylinder Specify

Assemblies and Components Finish

Number Size Price

DG2 C460-1 464 cylinder

DG2 C460-2 465 cylinder

DG2 C480-1 474, 484 cylinder $140.00

DG2 C480-2 485, 487 cylinder

DG2 C480-3 475, 486 cylinder"

460/470/480 Cylinder Specify

Assemblies and Components Finish

Number Description Price

DG2 DS6272CTL Control key $16.00

DG2 DS6272MK Masterkey

Cut Master Keys

Options Number Description Price Each

DG2-60 Degree DG2 Large Format Interchangeable Plastic Disposable Construction Core No Addition

DG2-63 Degree DG2 Large Format Interchangeable Core Cylinder - includes masterkeying charges $130.00

DG2-64 Degree DG2 Large Format Interchangeable Construction Core Cylinder $74.00

Note: Price includes Masterkeying

DG2-6300 Series Large Format Interchangeable Core (LFIC) Cylinders

Option Description Price

101 For Adams Rite 1850, 4700

105 Sargent Short Cams I/S 78/82 (16 & 92) functions

106 For Schlage "L" No Addition

113 For 4370 Key Switch Coverleaf Cam

112 "Open" Misc. – Wide Straight Cam

115 Sargent Removable (63-) Hotel (50-) Cam for 50-60/63-40 series cylinders

Note: *Cams must be ordered with cylinders – permanently attached at the factory.

*Cylinders with following Cams

DG2-63 34, 42, 43, 44, & 46 - 6 Pin Only $216.00

Degree DG2 LFIC Mortise & Rim Cylinders - Includes Master & Grand Master Keying Charges Specify Finish

Number Cylinder Size Price

DG2-6300 6-Pin only $130.00

Degree DG2 LFIC ONLY - Includes Master & Grand Master Keying Charges Specify Finish

Number Cylinder Size Price

DG2-65-6300 6-Pin only $120.00

Degree DG2 LFIC ONLY - Unassembled Specify Finish

Number Cylinder Size Price

DG2-60 34, 42, 43, 44, & 46 - 6 Pin Only $86.00

Degree DG2 LFIC Mortise & Rim body only - Includes Master & Grand Master Keying Charges Specify Finish

Option Number Cylinder Size Price

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

CK-36

CYLINDERS & KEYING

DEGREE KEY SYSTEM

DG3 MORTISE, RIM AND BORED LOCK, D.BOLTS,

INTEGRALOCK, AND PADLOCK CYLINDERS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

DG3 34 $165.00

DG3 41, 42, 43, 44, 46

Note: Price does not include Masterkeying

Rim and Mortise Cylinder 6 Pin

Option Specify finish when ordering Price

101 For Adams Rite 1850, 4700

105 Sargent Short Cams I/S 78/82 (16 & 92) functions

106 For Schlage "L" No Addition

113 For 4370 Key Switch Coverleaf Cam

112 "Open" Misc. – Wide Straight Cam

Mortise Cylinders with following suffix cam no.

Cam No. Add/cyl

Note: Mortise & Rim cylinder housings include #97 Rossette are available in the following finishes: 3, 4, 9, 10, 10B, 10BE, 10BL, 14, 15,

20D, 26, 26D, BSP, WSP. Bored Cylinder Assemblies, cylinder plugs/barrels are available in the following finishes: 4, 15.

DG3 C11-1 T-Zone cylinder - all functions except 50 function $163.00

DG3 C10-1 10, 8L, 7L, 6500 lever lock cylinder- all functions except 50 function

DG3 Degree Level Specify

T-Zone (11 Line), 10L, 8L, 7L, 6L, 6500 Lever Lock Cylinder Assemblies and Components Finish

Option Description Price

DG3 C8-1 9, 8L Knob Locks - all functions except 50 function $163.00

DG3 C8X-1 8X knob lock except 50 funtion

8L, 8X & 9L Knob Lock Cylinder Assemblies and Components Specify Finish

Option Description Price

DG3 C6-1 6 Line knob lock (S & N knobs) - all functions except 50 function $163.00

DG3 C6-1B 6L Knob Lock cylinder (B knob) - all functions except 50 function

6L Knob Lock Cylinder Assemblies and Components Specify Finish

Option Description Price

DG3 C7600-1 7600 Integra functions 04, 05, & 37 $204.00

7600 Integralock Cylinder Specify

Assemblies and Components Finish

Number Size Price

DG3 C460-1 464 cylinder

DG3 C460-2 465 cylinder

DG3 C480-1 474, 484 cylinder $163.00

DG3 C480-2 485, 487 cylinder

DG3 C480-3 475, 486 cylinder

460/470/480 Cylinder Specify

Assemblies and Components Finish

Number Description Price

CK-37

CYLINDERS & KEYING

DEGREE KEY SYSTEM

DG3 LARGE FORMAT IC CORE CYLINDERS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

DG3 DS6272CTL Control key $16.00

DG3 DS6272MK Masterkey

Cut Master Keys

Options Number Description Price Each

DG3-60 Degree DG3 Large Format Interchangeable Plastic Disposable Construction Core No addition

DG3-63 Degree DG3 Large Format Interchangeable Core Cylinder - includes masterkeying charges $153.00

DG3-64 Degree DG3 Large Format Interchangeable Construction Core Cylinder $74.00

Note: Price includes Masterkeying

Above options not available with 50 hotel function

DG3 cores must be used with DG3- housings to maintain the UL437 listing

DG3-6300 Series Large Format Interchangeable Core (LFIC) Cylinders

Option Description Price

101 For Adams Rite 1850, 4700

104 Adams Rite 4070, 4350, 4250, 4516, 4150

105 Sargent Short Cams I/S 78/82 (16 & 92) functions

106 For Schlage "L" No Addition

113 For 4370 Key Switch Coverleaf Cam

112 "Open" Misc. – Wide Straight Cam

Note: *Cams must be ordered with cylinders – permanently attached at the factory.

*Cylinders with following Cams

DG3-63 34, 42, 43, 44, & 46 - 6 Pin Only $239.00

Degree DG3 LFIC Mortise & Rim Cylinders - Includes Master & Grand Master Keying Charges Specify Finish

Number Cylinder Size Price

DG3-6300 6-Pin only $153.00

Degree DG3 LFIC ONLY - Includes Master & Grand Master Keying Charges Specify Finish

Number Cylinder Size Price

DG3-60 34, 42, 43, 44, & 46 - 6 Pin Only $86.00

Degree DG3 LFIC Mortise & Rim body only Specify Finish

Option Number Cylinder Size Price

Retrofit Parts/Tail Pieces required with hardware not ordered to accept Degreee Series 6300 core

08-5265 10-60-63 8 Line Knob Parts Pack $37.50

10-3429 10, 7, 6500 Tail Piece & Retainer Pack $8.64

11-5003 11 Line "T-Zone" Tail Piece & Retainer Pack $7.91

13-5178 11-60-63-34 Rim Cylinder Parts Pack $33.66

16-2508 460 Series Cam Assembly $3.50

17-2632 758/858 Tail Piece & Retainer Pack $9.87

431-6 Shear Tool used to modify existing 60- Mortise cylinder housings

to accept 11-6300 & DG1, DG2 -6300 series cores $401.00

436-1 Top Loading Kit $644.00

437DGM Master Degree Pinning Kit $1,318.00

437DG1 Degree DG1 Pinning Kit $832.00

CK-38

CYLINDERS & KEYING

DEGREE™KEY SYSTEM

DEGREE PINS AND PARTS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Conical Bottom Pins

Part No. Size Price

DG-0021 1

$16.00

(100 pins

per pack)

DG-0022 2

DG-0023 3

DG-0024 4

DG-0025 5

DG-0026 6

Driver Pins for Bump Resistance

Part No. Size Price

DG-0031 9

$16.00

(100 pins

per pack)

DG-0032 8

DG-0033 7

DG-0034 6

DG-0035 5

DG-0036 4

Miscellaneous Parts Price

(100 pins

per pack)

Part No. Description

DG-0016 Screw $18.00

DG-0017 Compression Spring $35.00

DG-0059 Sidebar Spring $8.00

DG-0060 Slider Spring $10.00

DG-0097 Compression Spring - LFIC $35.00

Driver Pins

Part No. Size Price

DG-0051 1

$8.00

(100 pins

per pack)

DG-0052 2

DG-0053 3

DG-0054 4

DG-0055 5

DG-0041 9

$36.00

(100 pins

per pack)

DG-0042 8

DG-0043 7

DG-0044 6

DG-0045 5

DG-0246 6

$17.00

(100 pins

per pack)

DG-0247 7

DG-0248 8

DG-0249 9

DG-0250 10

DG-0251 11

DG2 & DG3 Bottom Pins – First 5 Positions

Part No. Size Price

DG-0111 1L

$39.00

(100 pins

per pack)

DG-0112 2L

DG-0113 3L

DG-0114 4L

DG-0115 5L

DG-0116 6L

DG-0121 1C

DG-0122 2C

DG-0123 3C

DG-0124 4C

DG-0125 5C

DG-0126 6C

DG-0131 1R

DG-0132 2R

DG-0133 3R

DG-0134 4R

DG-0135 5R

DG-0136 6R

Cams for Degree Mortise Cylinders in Sargent Keyways

Part No. Decription Price

DG-0001 Standard cam

$11.92

DG-0002

Short cam (-105) used with Sargent

mortise functions 16 & 92 on the

inside cylinder

DG-0004 Adams Rite cam (-101) 1850, 4700

DG-0005 Adams Rite short cam (-104) 4070,

4350, 4250, 4516, 4150

DG-0006 4370 Keyswitch cam (-113)

DG-0007 Schlage "L" cam (-106)

DG-0008 "Open" miscellaneous cam (-112)

DG-2808 Hotel cam (-115) used in 78/8250

functions

BORED LOCKS

TABLE OF CONTENTS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Bored Locks - How to Order ..................................BL-1

T-Zone (11 Line)..........................................BL-2 - BL-21

T-Zone Options ........................................................................BL-2

T-Zone B, L, P Levers ...............................................................BL-3

T-Zone Options .........................................................................BL-4

T-Zone J Levers. .......................................................................BL-5

T-Zone Lockbody Assemblies .....................................BL-6 to BL-9

T-Zone Levers & Roses ..........................................................BL-10

T-Zone SL Levers....................................................................BL-11

T-Zone Locking Sleeve Assemblies .........................BL-12 to BL-13

T-Zone Locking Sleeve, Latch & Bearing Assemblies ............BL-14

T-Zone Parts ...........................................................................BL-15

10-Line Grade 1 Lever Lock ....................BL-16 - BL-27

10-Line Options ......................................................................BL-16

10-Line: B, L, P Levers ...........................................................BL-17

10-Line Options ......................................................................BL-18

10-Line: J Lever ......................................................................BL-19

10-Line Coastal Series Options..............................................BL-20

10-Line Coastal Series Y, G Levers ........................................BL-21

10-Line Levers ........................................................................BL-22

10-Line Coastal Series Levers................................................BL-23

10-Line Roses, Latches, Assemblies......................................BL-24

10-Line Lockbody Assemblies ................................................BL-25

10-Line FW Lockbody Assemblies .........................................BL-26

10-Line Parts ..........................................................................BL-27

7-Line Grade 2 Lever Lock ......................BL-28 - BL-35

7-Line Options ........................................................................BL-28

7-Line: B, L, P Levers .............................................................BL-29

7-Line Coastal Series Options................................................BL-30

7-Line Coastal Series Y, G Levers ..........................................BL-31

7-Line Levers ..........................................................................BL-32

7-Line Coastal Series Levers..................................................BL-33

7-Line Lockbody Assemblies ..................................................BL-34

7-Line Rose/Latches/Parts .....................................................BL-35

6500-Line Grade 2 Lever Cylindrical Lock ..........BL-36

DL Series ................................................BL-37 to BL-45

DL Series – A, B, E, F, J, L, P, W Levers................................BL-37

DL Series – Coastal Series ....................................................BL-38

DL Series – Studio Collection Levers

(Except Gramercy Series) ......................................................BL-39

DL Series – Studio Collection Levers

(Wooster Square)....................................................................BL-40

DL Series – Studio Collection Levers

(Wooster Square & Grant Park)..............................................BL-41

DL Series – Studio Collection Levers - Gramercy Series ......BL-42

DL Series – Studio Collection Levers - Gramercy Series ......BL-43

DL Series – SIMPLÌ™Roseless Trim Coastal Series .............BL-44

DL Series – SIMPLÌ™ Roseless Trim Studio Collection

Levers .....................................................................................BL-45

8X Line Grade 1 Knob Lock ....................BL-46 - BL-47

8X Line Grade 1 Options........................................................BL-46

8X Line Grade 1 Knob Lock & Strikes....................................BL-47

6-Line Grade 2 Knob Lock ......................BL-48 - BL-51

6-Line Options ........................................................................BL-48

6-Line – Knob Design.............................................................BL-49

6-Line Latches/Parts...............................................................BL-50

6-Line Parts ............................................................................BL-51

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

BL-1

BORED LOCKS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Function

SARGENT ANSI

U15 F75

U65 F76

G75 F78

G75-2 F79

G30 F80

G05 F81

G24 F82

G37 F84

G87 F85

G04 F86

G17 F87

G16 F88

G13 F89

G54 F90

G26 F91

G44 F92

G50 F93

How to Order

Step Description Example

Quantity Each 10 Ea.

Option Consult catalog for options available 10 Ea. 28-

Line 11, 10, 9, 8, 7, 6, 3, DL, RDL & 6500 10 Ea. 28- 11

Function Consult catalog for functions available 10 Ea. 28- 11G05

Design Consult catalog for designs available 10 Ea. 28- 11G05 LL

Finish Consult catalog for finishes available 10 Ea. 28- 11G05 LL US26D

Hand Consult catalog for handing requirements 10 Ea. 28- 11G05 LL US26D RH

Split Finishes Specify outside finish first 10 Ea. 28- 11G05 LL US26D/10B

Finish

SARGENT ANSI Description

US3 605 Polished Brass

US4 606 Satin Brass

US9 611 Polished Bronze

US10 612 Satin Bronze

US10B 613 Oxidized Satin Bronze / Oil Rubbed

US10BE 613E Dark Oxidized Satin Bronze - Equivalent

US10BL 616 Oxidized Satin Bronze / Lacquered

US14 618 Polished Nickel, clear coated

US15 619 Satin Nickel Plate

US20D 622 Dark Statuary Bronze / Powder coated

US26 625 Polished Chrome

US26D 626 Satin Chrome

US32 629 Polished Stainless Steel

US32D 630 Satin Stainless Steel

BSP n/a Black Suede Powder Coat

WSP n/a White Suede Powder Coat

NL NO LACQUER

ANSI Finish and Function Comparison

Notes:

For locks with non-ferrous material for marine use, please contact the factory.

BL-2

BORED LOCKS

OPTIONS

Price Book No. 31 | May 1, 2018

Reproduction in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.

Contact us at: 800-727-5477 or visit www.sargentlock.com. In Canada contact us at: 800-461-3007 or visit www.assaabloydss.ca

Options Description Price

10▲SARGENT Signature Key System $56.00 / cyl.

11▲SARGENT XC Key System (not available with 10, 22, SC, SE options) No addition

1160▲Sargent XC Large Format Interchangeable Plastic Disposable Construction Core No addition

1163▲Sargent XC Large Format Interchangeable Core Cylinder - Includes masterkeying charges $74.00

1164▲Sargent XC Large Format Interchangeable Construction Core Cylinder $74.00

1170 Small Format interchangeable disposable construction core - to accept 7 Pin XC permanent core No addition

11727P Small Format interchangeable keyed construction core - to accept 7 Pin XC permanent core $66.00

11737P Small Format interchangeable core - to accept 7 pin XC permanent core $66.00 /cyl.

21▲SARGENT Construction Key System (lost ball) Standard on all new systems est. since 5/1/96 $16.00 / cyl.

22 SARGENT Construction Key System (split key) To be used on pre-est. split key system only $32.00 / cyl.

23 Lockset x 3-3/4" Backset $10.00

25 Lockset x 5" Backset $17.00

28 Lockset x ANSI A-115.2 Strike – 1-1/4" Lip Standard

Lip Lengths 1-1/8" or 1-3/8" No addition

Lip Lengths 1-5/8", 1-7/8", 2-1/8", 2-3/8", 2-5/8", 2-7/8" $11.00

30▲Lever to accept Schlage cylinder - no cylinder provided No addition

31▲For 2-1/4" to 2-1/2" thick doors, centered in door prep, no paneling.

Consult factory for other door thicknesses available by special application. $260.00

36 6 Lobe security head screws $14.00

37 Spanner head screws $9.00

41▲Lockset x 3/4" Throw (04, 05, 13, 15-3, 16, 17, 30, 37, 38 Functions) $98.00

60▲SARGENT Large Format Interchangeable Plastic Disposable Construction Core No addition

63▲SARGENT Large Format Interchangeable Core Cylinder includes master and grandmaster keying charge $74.00 / cyl.

64▲SARGENT Large Format Interchangeable Construction Core Cylinder $74.00

6573▲Small Format 6 Pin Uncombinated Core $56.00 / cyl.

65737P▲Small Format 7 Pin Uncombinated Core $56.00 / cyl.

70▲Small Format Interchangeable disposable plastic construction core No addition

72▲Small Format Interchangeable 6-pin Construction Core (7-Pin w/11- option) $66.00

73▲Small Format Interchangeable Core, 6-Pin Includes MK and GMK keying charges $66.00 / cyl.

737P▲Small Format Interchangeable Core, 7-Pin Includes MK and GMK keying charges $66.00 / cyl.

74 Lead Lining I/S Rose, O/S Rose, and Latch Tube $198.00 /lock

75 Tactile Warning - Milled on backside of inside lever $36.00

76 Tactile Warning - Milled on backside of outside lever $36.00

77 Tactile Warning - Milled on backside of both levers $72.00

80▲Levers to accept KESO and Keso F1 cylinders – no cylinders provided -$84.00/cyl.

82▲SARGENT KESO Security Cylinder (existing Key Systems only) $81.00 /cyl.

F182▲SARGENT KESO Security Cylinder – patented –New Key Systems $81.00 /cyl.

85 Tactile Warning - Abrasive coating on inside lever $43.00

86 Tactile Warning - Abrasive coating on outside lever $43.00

87 Tactile Warning - Abrasive coating on both levers $86.00

BR SARGENT Bump Resistant Cyls.

(N/A w/10, 22, 30, 60, 63, 64, 70, 72, 73, 737P, KESO, SC, SE)

$22.00 /cyl.