Satarii 1721BA1 Wireless Robotically Controlled Camera System Basestation User Manual MC 00068 R02 Information Guide2 indd

Satarii Inc Wireless Robotically Controlled Camera System Basestation MC 00068 R02 Information Guide2 indd

UserManual.wiki >

1721BA1 User Manual >

Contents

1. user manual
2. user manual - quick guide

user manual

Information Guide

LanyardThe lanyard is only intended for use with adults. It does not contain a safety breakaway for use with children (under the age of 8).Infrared InterferenceThis product uses IR technology. Direct interference from strong IR sources, such as sun, plasma TVs, and some types of light ﬁxtures, may aect its performance. Remove the interference, or direct the product away from from the IR source.Radio Frequency InterferenceThis product uses 2.4Ghz wireless technology for wireless audio transmission. High saturation of similar technology in the immediate vicinity may degrade audio qualityAvoid waterDo not expose this product to water or rain, or handle near wet locations. Do not spill food or liquid on the product. In the case that it gets wet, remove batteries and unplug any cables and allow it to fully dry before turning it back on again. Damage due to liquid is not covered under warranty.Avoid operation while drivingDo not use this product while driving.Air travelUse of this product may be prohibited while travelling in aircraft as it emits radio frequencies during operation. Acceptable temperaturesThe product is designed to be used between 0 degrees and 40 degrees C (32 degrees and 104 degrees F). ImportantAny modiﬁcations to the unit, unless expressly approved by the party responsible for compliance, could void the user’s authority to operate the equipment. The product has demonstrated EMC compliance under conditions that included the use of compliant peripheral devices and shielded cables between system components. It is important that you use the compliant peripheral devices and shielded cables between system components to reduce the possibility of causing interference to radios, televisions and other electronics devices. Canadian Compliance StatementComplies with the Canadian ICED-003 Class B speciﬁcations. Cet appareil numerique de la lass B est conforme a la norme NMB-003 du Canada. This device complies with RSS 210 of Industry Canada. This Class B device meets all the requirements of the Canadian interference-causing equipment regulations. Cet appareil numerique de la Classe B respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Cet appareil est conforme aux normes CNR exemptes de licence d’Inustrie Canada. Le fonctionnement est soumis aux deus conditions suivantes: (1) cet appareil ne doit pa provoquer d’interferences et (2) cet appareil doit accepter toute interference, y compris celles susceptibles de provoquer un fonctionnement non souhaite de l’appareil.WarrantyThis product is guaranteed against manufacturing defects for one (1) year from the original date of purchase. Satarii’s sole obligation in the event of such defects during this period is to repair or replace the defective part or product with a comparable part or product. This is done at Satarii’s sole discretion. Except for such replacement, the sale, or other handling of this product is without warranty, condition or other liability even though the defect or loss is caused by negligence or other fault. Damage resulting from use, misuse, accident, or normal wear and tear is not covered by this or any warranty. Satarii assumes no liability for incidental or consequential damages relating to or resulting from the use of this product or any of its parts. When servicing your warranty request, Satarii may require you to furnish proof of purchase details. Visit www.swivl.com for more information.Attention“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect speciﬁcally to iPod or iPhone, respectively, and has been certiﬁed by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may aect wireless performance.Carrying and handlingProduct contains sensitive components. Do not drop, disassemble, microwave, burn, paint or insert foreign objects into device. Do not use if it has been damaged.AC AdapterThe product is designed to be used only with the Swivl approved AC Adapter.It can be stored between -20 degrees and 70 degrees C (-4 degrees and 158 degrees F). Low or high temperature conditions might lead the product to temporarily stop working, or working properly. Allow unit to return to room temperature after storage at high or low temperatures before operation. Leaving product in a parked vehicle or in direct sunlight can cause it to exceed the storage or operating temperature ranges. FCC StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try and correct the interference by one or more of the following measures:• Reorientorlocatethereceivingantenna.• Increasetheseparationbetweentheequipment and receiver.• Connecttheequipmentintoanoutletonacircuit dierent from that to which the receiver is connected.• Consultthedealeroranexperiencedradio/TV technician for help.