Satellite Electronic 18004 CEILING FAN REMOTE CONTROLLER User Manual TR312A MR181A 2018 11 16

Download:
Mirror Download [FCC.gov]
Document ID	4177000
Application ID	y/i6bVY8tr+WmyJCDWtyog==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.97kB (162083 bits)
Date Submitted	2019-02-22 00:00:00
Date Available	2019-02-22 00:00:00
Creation Date	2018-11-28 11:36:10
Producing Software	Acrobat Distiller 9.3.2 (Windows)
Document Lastmod	2019-01-10 17:08:17
Document Title	Microsoft Word - TR312A+MR181A -2018-11-16
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

CEILING FAN REMOTE CONTROLLER
OPERATION AND INSTALLATION INSTRUCTIONS
(Please keep this instruction pamphlet.)
IMPORTANT
YOU MUST SET CEILING FAN MANUAL SWITCH TO HIGH SPEED AND LIGHT
KIT (IF ANY) TO ON POSITION BEFORE OPERATING REMOTE CONTROL.
IMPORTANT POINTS TO REMEMBER:
1.
Read and save these instructions.
2.
Please note that all fixed wiring appliances should be installed by a qualified electrician.
3. The supply to the remote control receiver should be connected through a mains switch, i.e.
existing wall switch.
4. Disconnect from power supply at wall switch before working on remote control receiver or
ceiling fan.
5.
Install receiver into the ceiling fan canopy of the fan to ensure proper protection.
6. This unit is to be used for the control of ceiling fan and in an AC110V/120V 60Hz power
7.
Do not install in damp locations or immerse into water. (For indoor use only.)
8.
Do not pull on or cut leads shorter.
9.
Do not drop or bump the unit.
supply only.
INSTALLATION INSTRUCTIONS
CAUTION: INCORRECT WIRE CONNECTION WOULD DAMAGE THIS RECEIVER.
1.
Ceiling fan must be set at HIGH speed and light kit (If any) at ON position by pulling the “Pull Switch” after
installation.
2.
Once the connection has been made, the receiver inserts into the drop rod hanging bracket. The canopy
comes up to cover the receiver and bracket.
CODE SWITCH
1.
CODE SWITCH: Codes are set by
pushing dip switches up or down. It is
imperative that the code used for both
transmitter and receiver is exactly the
same; otherwise remote controller will not
work. Please note the code switch will
enable you to operate a second remote
controller independently. For example, if
you have two ceiling fans with 2 remote
control units, set 2 different codes for each
set of transmitter/receivers. This means
you can operate each ceiling fan independently.
FUNCTIONS OF TRANSMITTER
: Indicator LED will flash as for pressing key
: FAN key for turning off fan power
: Fan speed control: turn on and increasing or decreasing fan speed
: UP LIGHT key for turning on or off light power
: DOWN LIGHT key for turning on or off light power
: UP or down key with function for dimmer or brighten the light.
: Pull out for turning off AC power.
To assure continued FCC compliance:
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the
equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an
experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate
the equipment.
FCC ID：2AQZU-18004
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Administrator
Create Date                     : 2018:11:28 11:36:10+08:00
Modify Date                     : 2019:01:10 17:08:17+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : Microsoft Word - TR312A+MR181A -2018-11-16
Creator                         : Administrator
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2019:01:10 17:08:17+08:00
Producer                        : Acrobat Distiller 9.3.2 (Windows)
Document ID                     : uuid:265e943e-c86f-4bba-81eb-d80f1e2b177e
Instance ID                     : uuid:2d3a3902-6d35-47a6-96b3-434d20b8f1f4
Page Count                      : 2

EXIF Metadata provided by EXIF.tools