Sato CL4XXESM CL408e/CL412e with MP 9310 RFID reader User Manual Manual

Sato Corporation CL408e/CL412e with MP 9310 RFID reader Manual

Manual

Download: Sato CL4XXESM CL408e/CL412e with MP 9310 RFID reader User Manual Manual
Mirror Download [FCC.gov]Sato CL4XXESM CL408e/CL412e with MP 9310 RFID reader User Manual Manual
Document ID517184
Application IDOwXyykFZpZbHCu6DqgA3ww==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize149.01kB (1862599 bits)
Date Submitted2005-02-21 00:00:00
Date Available2005-02-21 00:00:00
Creation Date2004-08-09 17:51:07
Producing SoftwareAcrobat Distiller 4.0 for Windows
Document Lastmod2004-09-22 14:36:00
Document TitleManual

CL408e/412e
Quick Guide
DECLARATION OF CONFORMITY
SATO America, Inc.
10350A Nations Ford Road, Charlotte, North Carolina 28273
TEL (704) 644-1650
declare under our sole responsibility that the product
CL408e, CL412e
complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC COMPLIANCE
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try and correct the interference by one or more of the following
measures:
— Reorient or locate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Reader antennas should be positioned so that personnel in the area for
prolonged periods may safety remain at least 20 cm (7.9 in) in an
uncontrolled environment from the antenna's surface.
See FCC OET Bulletin 56 "Hazards of radio frequency and
electromagnetic fields" and Bulletin 65 "Human exposure to radio
frequency electromagnetic fields."
This device shall not be co-located with any other transmitting antenna.
PN9001067 Rev B
Page 1
CL408e/412e
Quick Guide
Table of Contents
What You Get
.................................................................................
Controls and Indicators
...................................................................
Operator Panel ...................................................................
LED Indicators
....................................................................
Adjustments
........................................................................
Keys .....................................................................................
Rear Panel Connections
.....................................................
Initial Setup .....................................................................................
Connecting the Printer
........................................................
Printing a Test Label
...........................................................
Configuring the Printer ........................................................
Computer Connections .......................................................
CL408e/412e Software and Drivers
................................................. 10
Label Wizard SE ................................................................. 10
Windows Drivers
................................................................. 11
What to do if it will not print
CL408e/412e Specifications
Media and Supplies
Options
............................................................... 11
............................................................ 15
......................................................................... 16
............................................................................................ 16
Safety Considerations
Safety Information
...................................................................... 17
............................................................................ 18
This Quick Guide was prepared to get you up and running quickly. It will
enable you to get your new SATO CL408e/412e installed and printing
with a minimum of effort. However, it is recommended that you familiarize
yourself with the contents of the CL408e/412e Operator and Technical
Reference Manual for detailed descriptions so you will be able to
properly use the printer to its full potential.
PN9001067 Rev B
Page 2
CL408e/412e
Quick Guide
Safety Information
PN9001067 Rev B
Page 18
CL408e/412e
Quick Guide
Safety Information
PN9001067 Rev B
Page 19
CL408e/412e
Quick Guide
Safety Information
PN9001067 Rev B
Page 20
CL408e/412e
Quick Guide
Safety Information
PN9001067 Rev B
Page 21

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2004:08:09 17:51:07
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2004:09:22 14:36:00+09:00
Page Count                      : 22
EXIF Metadata provided by EXIF.tools
FCC ID Filing: MMFCL4XXESM

Navigation menu