Sato RWMTM2 RFID Reader Module User Manual M5e leaflet
Sato Corporation RFID Reader Module M5e leaflet
Sato >
User Manual
FCC REQUIREMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
FCC WARNING:
Changes or modifications not expressly approved by the
manufacturer
for compliance could void the user's authority to
operate the equipment.
FCC NOTICE:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide reasonable
protection against
harmful interference in a residential
installation. This equipment
generates and can radiate radio
frequency energy and, if not installed
and used in accordance
with instructions, may cause harmful
interference to radio
communications. However, there is no guarantee
that
interference will not occur in a particular installation.
If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV
technician for
help.
M5e RFID
Radio interface instructions
This transmitter must not be co-
located or operated in
conjunction with any other antenna or transmitter.
This equipment complies with FCC radiation exposure limits set
forth for uncontrolled equipment and meets the FCC radio
frequency (RF) Exposure Guidelines in
Supplement C to
OET65. This equipment has very low levels of RF energy
that it
deemed to comply without maximum permissive
exposure
evaluation (MPE). But it is desirable that it
should be installed
and operated with at least 20cm and more
between the radiator
and person’s body (excluding extremities: hands, wrists, feet
and ankles).
Properly shielded a grounded cables and connectors must be
used for connection to host computer and / or peripherals in
order to meet FCC emission limits.
AC adaptor with ferrite core must be used for RF interference
suppression.
CE Caution:
If you want to get a copy of the original Declaration of Conformity
of our
products which relates the R&TTE, please contact to web
address: www.satoworldwide.com
Contact
SATO America, Inc.
10350A Nations Ford Road Charlotte, NC 28273
Phone: (704) 644-1650
Fax: (704) 644-1662
satosales@satoamerica.com
SATO INTERNATIONAL PTE. LTD
438A Alexandra Road #05-01/04,
Alexandra Technopark, Singapore 119967
Phone: (65)-6271-2122
Fax: (65)-6271-2151
sales@sato-int.com