Savant Systems CRU0100 Savant Remote User Manual New FCC IC Statement 11 2

Savant Systems LLC Savant Remote New FCC IC Statement 11 2

Contents

User Manual Statements

Download: Savant Systems CRU0100 Savant Remote User Manual New FCC IC Statement 11 2
Mirror Download [FCC.gov]Savant Systems CRU0100 Savant Remote User Manual New FCC IC Statement 11 2
Document ID2814595
Application IDe+Oydq5aKOT9dD34kIksfA==
Document DescriptionUser Manual Statements
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize5.84kB (73033 bits)
Date Submitted2015-11-17 00:00:00
Date Available2016-05-16 00:00:00
Creation Date2015-11-09 08:09:48
Producing SoftwareGPL Ghostscript 8.70
Document Lastmod2015-11-11 13:10:28
Document TitleNew_FCC_IC_Statement_11_2
Document CreatorPDFCreator Version 0.9.9
Document Author: 06102142

Savant Remote
FCC Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
FCC and IC Identifier For Savant Remote
This device electronically displays the FCC declaration of conformity logo as well as the
FCC and IC identifier. This information can be found on the device by accessing: Main
Menu->Settings->About.
Industry Canada Statement
 This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
 Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
This device complies with RSS-310 of Industry Canada. Operation is subject to
the condition that this device does not cause harmful interference.
Cet appareil est conforme à la norme RSS-310 d'Industrie Canada. L'opération est
soumise à la condition que cet appareil ne provoque aucune interférence nuisible.
This device and its antenna(s) must not be co-located or operating in conjunction
with any other antenna or transmitter, except tested built-in radios. The County
Code Selection feature is disabled for products marketed in the US/Canada.
Cet appareil et son antenne ne doivent pas être situés ou fonctionner en
conjonction avec une autre antenne ou un autre émetteur, exception faites des
radios intégrées qui ont été testées. La fonction de sélection de l'indicatif du pays
est désactivée pour les produits commercialisés aux États-Unis et au Canada.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : GPL Ghostscript 8.70
Keywords                        : 
Modify Date                     : 2015:11:11 13:10:28+08:00
Create Date                     : 2015:11:09 08:09:48+08:00
Creator Tool                    : PDFCreator Version 0.9.9
Metadata Date                   : 2015:11:11 13:10:28+08:00
Document ID                     : b59f1f85-88d1-11e5-0000-ebfc05ab5dd7
Instance ID                     : uuid:fc01e1e9-1125-4f8c-bce0-9de0dc2169f6
Format                          : application/pdf
Title                           : New_FCC_IC_Statement_11_2
Creator                         : 06102142
Description                     : ()
Page Count                      : 2
Subject                         : 
Author                          : 06102142
EXIF Metadata provided by EXIF.tools
FCC ID Filing: ASU-CRU0100

Navigation menu