Savant Technologies GE Lighting a Savant A19-CCOLOR-II C by GE Smart Bulb User Manual 4
GE Lighting C by GE Smart Bulb 4
User Manual
1. User Instructions - Made for Google Version
2. EASILY SET UP YOUR C BY GE SMART BULB
3. Plug in your Google Home Device.
4. Screw in your C by GE Smart Bulb in the same room as your Google Home device.
5. Turn on the light.
6. Download the Google Home app to set up your Google Home device and light bulb.
7. Don’t have a Google Home device? Simply screw in your smart bulb, download the C by
GE app and sit back and see life in a whole new way.
8.
9. User Instructions - Standard Version
10. EASILY SET UP YOUR C BY GE SMART BULB
11. Download the C by GE app.
12. Screw in your C by GE Smart Bulb and turn on.
13. Tap he “+” icon and follow the set up instructions.
To set up voice the out of home control, pair your C by GE Smart Bulb in the C by GE app with a
C-Reach Smart Bridge and a voice assistant (sold separately).
For set up help, visit cbyge.com
FCC requirements:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
FCC ID:
PUU-A19-CCOLOR-II