Savi Technology 654T-V3 RF Tag User Manual ST654
Savi Technology Inc RF Tag ST654
Contents
654 Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1076634 |
| Application ID | B53///qU1qagZHn4m8pkKg== |
| Document Description | 654 Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 46.35kB (579410 bits) |
| Date Submitted | 2009-03-05 00:00:00 |
| Date Available | 2009-03-05 00:00:00 |
| Creation Date | 2008-12-23 11:49:38 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2008-12-23 11:53:31 |
| Document Title | ST654.book |
| Document Creator | FrameMaker 8.0 |
| Document Author: | mmacleod |
Installation Guide Savi ST-654 Data Rich Tag Published February 2009 Part number 805-05826-901 Rev A Documentation for SaviTag ST-654 Copyright © 2009 Savi Technology, Inc. All rights reserved. Unpublished - rights reserved under the Copyright Laws of the United States. EchoPoint, Savi, Savi SensorTag, Savi SmartChain, Savi SmartStart, Savi Technology, Savi’s Nested Visibility, SaviTag, SmartChain, the EchoPoint Logo, and the Savi Logo are trademarks or registered trademarks of Savi Technology, Inc. in the United States and other countries. Information in this manual is subject to change without notice and does not represent a commitment from the vendor. The software and/or databases described in this document are furnished under a license agreement or nondisclosure agreement. The software and/or databases may be used or copied only in accordance with the terms of the agreement. It is against the law to copy the software on any medium except as specifically allowed in the license or nondisclosure agreement. THIS DOCUMENTATION CONTAINS CONFIDENTIAL INFORMATION AND TRADE SECRETS OF SAVI TECHNOLOGY, INC. USE, DISCLOSURE OR REPRODUCTION IS PROHIBITED WITHOUT THE PRIOR EXPRESS WRITTEN PERMISSION OF SAVI TECHNOLOGY, INC. U.S. GOVERNMENT RIGHTS Use, duplication or disclosure by the U.S. government is subject to restrictions set forth in the Savi Technology, Inc. license agreement and as provided in DFARS 227.7202-1(a) and 227.7202-3(a) (1995), DFARS 252.227-7013(c)(1)(ii) (OCT 1988), FAR 12.212(a) (1995), FAR 52.227-19 or FAR 52.227-14 (ALT III), as applicable. Savi Technology, Inc. Other product names mentioned in this guide may be trademarks or registered trademarks of their respective owners and are hereby acknowledged. Savi Technology. 351 E. Evelyn Avenue Mountain View, CA 94041-1530 Phone: 1-650-316-4700 Facsimile: 1-650-316-4750 www.savi.com Contents Savi ST-654 Data-Rich Tag Description . . . . . . . . . . . . . . . . . . . 5 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Activating the Tag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Initializing the Tag. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Placing the Tag for Best Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Mounting the Tag. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Replacing the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Contacting Savi Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 4 Savi ST-654 Data-Rich Tag Description The Savi ST-654 high performance, data-rich active RFID tag is suited for various applications, including tracking shipping containers, vehicles, and other large assets. Figure 1: Front view Tag ID number Battery compartment Figure 2: Rear view Battery compartment Tag model number Savi ST-654 Data Rich Tag Installation Guide Features • ISO 18000-7 compliant active RFID data-rich tag • 128 Kbytes of programmable database memory enables tag to support multiple applications • 400-foot (122m) omnidirectional line-of-sight range • Replaceable battery with a typical life of five years • Supports low-frequency technology for more precise locating capabilities • Supports USB for reading and writing • FCC, HERO, ETSI, RoHS (Directive 2002/95/EC) certified Activating the Tag The tag is shipped in sleep mode. You must remove and re-insert the battery to wake up the tag. After you re-insert the battery, you can initialize the tag. 1. Remove the battery cap. Turn cap to open Remove battery as shipped Activating the Tag 2. Remove the battery. Wait a few seconds and then reinsert the battery, matching the negative (–) and positive (+) terminals to the symbols shown on the tag housing. The tag will not work if you install the battery in the wrong direction (reversed). Turn cap to close Correct battery orientation Whenever a battery is inserted into a tag, the tag will emit 5 beeps. Then, the tag will emit 2 short beeps to indicate adequate battery voltage or 3 short beeps if a fresh battery is required. Whenever a battery is inserted into a tag, the tag assumes that it is a fresh battery. Inserting a used battery into a tag may result in what appears to be a premature battery failure. 3. Replace the battery cap on the tag. Continue tightening the cap until it is secure. Savi ST-654 Data Rich Tag Installation Guide Improper Proper O-ring exposed O-ring hidden Turn cap until tight If the O-ring is not properly compressed by the cap, water leakage and damage may occur. Note: When the tag is not in use, disable the tag by removing, reversing, and re-inserting the battery. Store the battery at room temperature (50-80 °F or 10-27 °C ). Initializing the Tag Once you activate the tag, you can initialize it for immediate use. 1. Unplug the USB port cover. 2. Insert the USB cable into the USB port on the tag and connect the other end to the USB port on the computer. Placing the Tag for Best Performance USB cable USB port 3. Refer to the Savi SmartChain Mobile User Guide or the Savi Smart- Chain WorkStation User Guide for instructions on the initialization process. Placing the Tag for Best Performance Savi Technology recommends that you mount the tag on a flat surface, with the tag aligned vertically. For best performance, place the tag as high Savi ST-654 Data Rich Tag Installation Guide as possible, safe from impact (for example, between the ribs of an ISO-type shipping container), and away from obstructions on the asset. Mount the tag by adhering the tag and supplied plastic mounting sleeve with pressure sensitive tape (PST) to the inside or outside of a Class VIII container or plastic, cardboard, or wood container or box. Typical locations include mounting the tag inside the middle of the container or on the outside of the container on a flat surface. For best performance, make sure the tag is: • Mounted on a metal surface. • Mounted at no less than a 6 foot (1.8m) elevation. • Mounted vertically. • Not mounted behind or between metal objects The next figure shows an example of a tag mounted on an ISO container according to the performance guidelines. Figure 3: Asset tag mounted on an ISO container door Note: Make sure you clean the surface of the container or other asset before attaching the tag. 10 Mounting the Tag The tag will have 400-foot (122m) read/write range to Savi SR-650 Fixed Readers. For the most consistent communications with the tag, the Fixed Readers must be mounted: • to have an unobstructed line-of-sight to the tag • at 20 feet (6m) or higher caution: Tags mounted close to the ground may have less range. Follow the instructions in the Savi Fixed Reader documentation to locate and position the Savi Fixed Reader for best performance. Mounting the Tag You can choose among several mounting methods for the tag, including using pressure sensitive tape (PST) or a plastic mounting sleeve. Whichever mounting method you select, the goal is to prevent accidental loss of the tag by sudden impact, vibration, or shock during transport. The fastener you choose often depends on the material from which the asset or container is constructed and your personal preference. There are two accessory mounting packages, which are sold separately: • Savi Mounting Kit STA-1260-Green, which includes PST • Savi Magnetic Mounting Kit STA-1261-Green You can also use the following alternative fastening methods: • Tie-wraps • Twine • Screws caution: Use these and other alternative methods at your own risk. If it is not possible or practical to use screws, use PST to attach the tag. Use only 3M Corporation’s Automotive Acrylic Plus Attachment Tape®. 11 Savi ST-654 Data Rich Tag Installation Guide For ease of installation, the tag comes with this PST on the back of the plastic mounting sleeve. PST mounting kits are also available for separate purchase. Pressure sensitive tape The magnetic mount clamps directly onto the metal surface. The magnets hold the tag securely, but allow the tag and the magnetic bracket to be removed quickly. Once a mounting sleeve is fastened to an asset, you can leave it on the asset even after the tag is removed so it is available for future use with other compatible tags. Prior to re-use, visually inspect the PST-mounted sleeve to make sure it is attached securely. If necessary, reinstall the sleeve using new PST. Asset tags and mounting sleeves have a security hole through which a nylon keeper band may be passed and tightened to secure the tag in place. 12 Replacing the Battery Security hole Replacing the Battery The tag is equipped with non-volatile memory, which means stored data is not lost when you replace the battery. 1. Remove the battery cap. 2. Remove the discharged battery from its compartment. For more information, see “Activating the Tag” on page 6. The lithium battery can be harmful to the environment. Follow current procedures for safely disposing of lithium batteries. The battery cannot be reused or recharged. 3. Install a 3.6V lithium "A" battery, matching the negative (–) and posi- tive (+) terminals to the symbols shown on the tag housing. The tag will not work if you install the battery in the wrong direction (reversed). 4. Replace the battery cap on the tag. Whenever a battery is inserted into a tag, the tag will emit 5 short beeps, one second apart. Then, the tag will emit 2 short beeps to indicate adequate battery voltage or 3 beeps to indicate inadequate battery voltage. 3 short beeps means the tag needs a fresh battery. 13 Savi ST-654 Data Rich Tag Installation Guide Whenever a battery is inserted into a tag, the tag assumes that it is a fresh battery. Inserting a used battery into a tag may result in what appears to be a premature battery failure. After the beep, continue tightening the cap until it is secure. Contacting Savi Support If you cannot find the information you need, contact Savi Support Services. • Check http://supportcenter.savi.com for contact information. • Send an email to help@savi.com. • Call 1-888-994-SAVI (North America only) or 1-650-316-4760 between 5 a.m. and 5 p.m. Pacific time. When you contact Savi Support Services by telephone or email, have the following information available: • Contact information (company name, your name, email, and phone number) • Problem description • Software version • Product type • Serial number or license information 14 Specifications Specifications Model Numbers ST-654-031: Data-rich tag ST-654-031-NSN: Data-rich tag with label Physical Characteristics Dimensions: 6.2 in. (15.8 cm) x 2.1 in. (5.4 cm) x 1.1 in (2.8 cm) Weight: 3.8 ounces (108g) Color: Green Beeper: Audible beeper for tag location Environmental Temperature: -32°C to +70°C operating; -40°C to +85°C storage Humidity: 95% non-condensing Vibration and shock: MIL-STD-810F Weatherproofing: IP64 Manufacturing: RoHS Directive 2002/95/EC Wireless (UHF Transceiver) Frequency: 433 MHz Communication range (unobstructed): 400 ft. (122m) operating read/write range (outdoors, non-obstructed) from Savi SR-650 reader Protocols: ISO 18000-7 and EchoPoint Wireless (LF Receiver) Frequency: 123 kHz Communication range: Greater than 20 ft. (6m) from SP-651-211 Signpost or SP-652-211 Signpost Reader Protocol: EchoPoint Power Battery type: 3.6 volt lithium-ion, replaceable by user without tools Battery life: Approximately 5 years at 2 collections per day. Over-polling protection algorithm to extend battery life Digital Database memory: On-board non-volatile memory: 128 Kb Wired interface: USB 1.1, USB 2.0 15 Savi ST-654 Data Rich Tag Installation Guide Accessories Mounting: • Pressure sensitive tape • Savi Mounting Kit SRA-1260-Green (sold separately) • Savi Magnetic Mounting Kit STA-1261-Green (sold separately) Approvals 16 Radio Type Approval: FCC Part 15, EN 300 220 (433 MHz) EMC and Immunity: EN 301 489 Ordnance: HERO Certified, ARDEC rating of 1 in. (2.5 cm)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Tagged PDF : Yes Page Mode : UseOutlines XMP Toolkit : Adobe XMP Core 4.0-c320 44.293068, Sun Jul 08 2007 18:10:11 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : FrameMaker 8.0 Modify Date : 2008:12:23 11:53:31-08:00 Create Date : 2008:12:23 11:49:38Z Metadata Date : 2008:12:23 11:53:31-08:00 Format : application/pdf Title : ST654.book Creator : mmacleod Document ID : uuid:bc7e3e2d-6963-4729-80cb-b3f672202d08 Instance ID : uuid:8dc80cde-1c17-4a78-b8ee-abaecf3f74c8 Page Count : 16 Author : mmacleodEXIF Metadata provided by EXIF.tools