Savi Technology 662T-V1 RF ID Tag User Manual

Download:
Mirror Download [FCC.gov]
Document ID	660891
Application ID	2FbbPBpeYwQpse/2skYXMA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	19.33kB (241583 bits)
Date Submitted	2006-05-22 00:00:00
Date Available	2006-05-22 00:00:00
Creation Date	2006-04-17 13:31:54
Producing Software	GPL Ghostscript 8.15
Document Lastmod	2006-04-17 13:31:54
Document Title	Microsoft Word - Savi-EJB Installation Guide - ST-662.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Daveg

Installation Guide For
Savi-EJ Brooks Re-Usable eSeal ST-662
Page 1 of 3
pages
ELECTRONIC COPY
NOT CONTROLLED IF PRINTED
Date Prepared
Feb 24, 2006
Revision
1.0
Revision Date
Feb 24, 2006
Revision Approval
K. Merritt
Savi-EJ Brooks Re-Usable eSeal ST-662
Installation Guide
The EJ Brooks Re-Usable Electronic eSeal ST-662 consists of a printed circuit board incorporating a
non-replaceable battery enclosed in a sealed plastic case with a fixed bolt designed for single insertion.
Once the bolt is inserted in the housing, it is locked in place, and cannot be removed without destroying
the unit.
•
The Savi-EJ Brooks ST-662 tag contains a label on the front with the tag serial number in
both bar code and numerical format and includes the product model number. The label also
includes FCC compliance markings.
•
The Savi-EJ Brooks ST-662 tag can be exposed to environments including rain, snow, and
direct exposure to sunlight.
•
The tag battery life is a nominal 4 years under normal operating conditions. The tag contains
an internal lithium battery and should be discarded according to local safety requirements.
Savi-EJB Installation Guide - ST-662.doc
Installation Guide For
Savi-EJ Brooks Re-Usable eSeal ST-662
Page 2 of 3
pages
ELECTRONIC COPY
NOT CONTROLLED IF PRINTED
Date Prepared
Feb 24, 2006
Revision
1.0
Revision Date
Feb 24, 2006
Revision Approval
K. Merritt
Tag Attachment
Do not insert the bolt
through the body of the tag
housing prior to inserting it
through the security hasp. Once the
external bushing cap (Intermodal
Locking Unit) is joined to the bolt,
it cannot be removed without
destroying the bolt.
The Savi-EJ Brooks ST-662 contains an integrated locking bolt assembly.
1. Place the bolt through the lock holes of the closed security hasp.
•
Always orient the tag with the main tag body below the container hasp.
2. Snap the bolt into the seal housing and then into the bolt cap far enough to hear an audible ‘click’,
locking the bolt into place, where the bolt is pushed in all the way. To make sure the bolt is secure,
pull on the seal case housing gently to make sure the bolt is secure. The bolt is now secured via the
cap’s internal bushing.
Tag Operation
•
After installation you may communicate with the device and monitor events using the
appropriate commands from a Savi Mobile Readers SMR-650 or Fixed Readers SR-650 and
SP-652.
•
Once the tag is electronically locked (sealed), if the bolt is cut or removed, a tamper event will
occur.
Savi-EJB Installation Guide - ST-662.doc
Installation Guide For
Savi-EJ Brooks Re-Usable eSeal ST-662
Page 3 of 3
pages
ELECTRONIC COPY
NOT CONTROLLED IF PRINTED
Date Prepared
Feb 24, 2006
Revision
1.0
Revision Date
Feb 24, 2006
Revision Approval
K. Merritt
Savi-EJB Installation Guide - ST-662.doc

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 3
Producer                        : GPL Ghostscript 8.15
Create Date                     : 2006:04:17 13:31:54
Modify Date                     : 2006:04:17 13:31:54
Title                           : Microsoft Word - Savi-EJB Installation Guide - ST-662.doc
Creator                         : PScript5.dll Version 5.2
Author                          : Daveg

EXIF Metadata provided by EXIF.tools