Savi Technology 696T-V1 RFID Tag User Manual ST 696 Installation Guide Rev02

Savi Technology Inc RFID Tag ST 696 Installation Guide Rev02

Users Manual

Savi Tag ST-696-001 ISO Container Door Tag with GPRS/GPS and Sensors Installation Guide 1 Installation Guide Savi Tag ST-696-001 ISO Container Door Tag with GPS/GPRS and Sensors
Savi Tag ST-696-001 ISO Container Door Tag with GPRS/GPS and Sensors Installation Guide 2 Published December 2007 Part number 805-02001-001 Rev 01 Documentation for Savi Tag ST-696-001 ISO Container Door Tag with GPS/GPRS and Sensors Copyright ©2007 Savi Technology, Inc. All rights reserved. Unpublished rights reserved under the Copyright Laws of the United States. EchoPoint, Savi, Savi Tag, Savi SmartChain, Savi SmartStart, Savi Technology, SaviTag, SmartChain, the EchoPoint Logo, the Savi Logo, the UDAP Logo, and UDAP are trademarks or registered trademarks of Savi Technology, Inc. in the United States and other countries. Information in this manual is subject to change without notice and does not represent a commitment from the vendor. The software and/or databases described in this document are furnished under a license agreement or nondisclosure agreement. The software and/or databases may be used or copied only in accordance with the terms of the agreement. It is against the law to copy the software on any medium except as specifically allowed in the license or nondisclosure agreement. THIS DOCUMENTATION CONTAINS CONFIDENTIAL INFORMATION AND TRADE SECRETS OF SAVI TECHNOLOGY, INC. USE, DISCLOSURE OR REPRODUCTION IS PROHIBITED WITHOUT THE PRIOR EXPRESS WRITTEN PERMISSION OF SAVI TECHNOLOGY, INC. U.S. GOVERNMENT RIGHTS Use, duplication or disclosure by the U.S. government is subject to restrictions set forth in the Savi Technology, Inc. license agreement and as provided in DFARS 227.7202-1(a) and 227.7202-3(a) (1995), DFARS 252.227-7013(c)(1)(ii) (OCT 1988), FAR 12.212(a) (1995), FAR 52.227-19 or FAR 52.227-14 (ALT III), as applicable. Savi Technology, Inc. Other product names mentioned in this guide may be trademarks or registered trademarks of their respective owners and are hereby acknowledged. Savi Technology, Inc. A Lockheed Martin Company 351 E. Evelyn Avenue Mountain View, CA 94041-1530 Phone: 1-650-316-4700 Facsimile: 1-650-316-4750 www.savi.com
Savi Tag ST-696-001 ISO Container Door Tag with GPRS/GPS and Sensors Installation Guide 3 Contents About Savi Tag ST-696-001 ISO Container Door Tag with GPS/GPRS and Sensors Features . . . 4 Description . . . 5 For More Information . . . 7 Guides to Read . . . 7 Contacting Savi Global Support Services . . . 7 Installing Savi Sensor Tag ST-696-001 ISO Container Door Tag with GPS/GPRS and Sensors Required Tools and Materials . . . 8 Commissioning the Tag with SaviTag Write Cable STA-1030 . . . 8 Replacing the Battery . . . 10 Tag Placement . . . 11 ST-696-001 ISO Container Door Tag with GPS/GPRS and Sensors Specifications 13
Savi Tag ST-696-001 ISO Container Door Tag with GPRS/GPS and Sensors Installation Guide 4 About Savi Sensor Tag ST-696-001 ISO ontainer Door Tag 1 C Savi® Tag ST-696-001 ISO Container Door Tag with GPS/GPRS and Sensors is a high performance active RFID tag that works with Savi software to track and monitor the security status of containers as they move through the global supply chain. This device is fully compatible with fixed and portable Savi readers and features up to 300 feet (91.44 meters) of omni-directional line-of-sight range. In addition, ST-696-001 Tag utilizes GPS receiver to report and recorded asset location using GSM/GPRS cellular network. Rechargeable Lithium Ion battery life is typically 90 days between the charges. The ST-696-001 tag is available with 128K of programmable memory. It includes a door clamp and external antennas. Using the door clamp, you affix the tag to the left door of an ISO-compliant container. Note: Savi Tag ST-696-001 ISO Container Door Tag only supports ISO 668: 1995(E) Series 1 freight containers. Features ◆ 433 MHz, active RFID technology with up to 300-foot (91.44-meter) range for monitor, wake-up, RF write/read ◆ 123 KHz receiver for slot level, portal, or chokepoint tag wake-up and short range commissioning (12 feet [3.7 meters] or less) ◆ GSP Receiver for asset real time location ◆ GSM/GPRS modem for worldwide communication to cellular networks ◆ Small form factor, ideally suited for shipping containers ◆ Rugged, weatherproof design ◆ Powered by a rechargeable Lithium Ion battery ◆ Intrusion detection sensors monitor door and light status ◆ Expandable sensor port connects to third-party sensor equipment ◆ Temperature, humidity, and shock sensors monitor the internal environment of a container ◆ 128KB nonvolatile memory for logging GPS location coordinates and sensor data
Savi Tag ST-696-001 ISO Container Door Tag with GPRS/GPS and Sensors Installation Guide 5 D escription Figure 1-1 Savi Tag ST-696-001 ISO Container Door Tag
Savi Tag ST-696-001 ISO Container Door Tag with GPRS/GPS and Sensors Installation Guide 6 Intrusion Detection Sensors The ST-696-001 tags include door and light sensors. The door sensor monitors the amount of pressure between the door and the device. If the door is open and the device has not been electronically unsealed, the device sends a message to the monitoring software indicating that the device has been tampered. It also writes the time and date of the tamper to an event log. The device also includes a light sensor that triggers an alarm if light is detected inside the container. Environmental Sensors The environmental sensors on the ST-696-001 tags monitor the temperature and humidity within the container. You can set the maximum and minimum values, and if the temperature or humidity rises above or falls below this range, the device writes the time and date of the breach to the event log. For example, if you are shipping a product that needs to be kept at temperatures between x and y degrees, you can set the ST-696-001 tag to record the date and time whenever the temperature breaches the maximum or minimum value. Tamper-Protection Plate The tamper-protection plate’s right angle flaps are bent to extend and protect the gap behind the plate as well as the tag plate. This plate prevents anyone from inserting a foreign object in an attempt to hold the tag plate in the closed position. RFID Communication Module The communication module is positioned on the outside of the container and operates at 433 MHz. This enables the Savi Tag ST-696-001 to communicate back to the Savi network with excellent RF performance in both heavy metal and non line-of-sight environments. GPS/GPRS Communication Modules The GPS receiver communication module is positioned on the outside of the container and it periodically turns on to acquire the location information which gets logged and subsequently reported through GPRS module to the application. The GPRS modem is a quad band radio that support worldwide deployment on GSM/GPRS cellular networks.
Savi Tag ST-696-001 ISO Container Door Tag with GPRS/GPS and Sensors Installation Guide 7 For More Information Guides to Read For information about using: ◆ Signposts, see the Savi Signpost SP-65X Series Installation Guide ◆ Fixed readers, see the Savi Fixed Reader SR-650-101 Installation Guide ◆ Mobile readers, see the Savi Mobile Reader SMR-650 for the Intermec 751G/A Mobile Computer and PC User Guide Contacting Savi Global Support Services If you cannot find the information you need, contact Savi Global Support Services. ◆ Check www.savi.com/services/su.contact.shtml for contact information. ◆ Send email to help@savi.com. ◆ Call 1-888-994-SAVI (North America only) or 1-650-316-4760 between 9 a.m. and 5 p.m. Pacific time. When you contact Savi Global Support Services by telephone or email, have the following information available: ◆ Contact information (company name, your name, email, and phone number) ◆ Problem description ◆ Product type ◆ Software version ◆ Serial number or license information
Savi Tag ST-696-001 ISO Container Door Tag with GPRS/GPS and Sensors Installation Guide 8 Installing Savi Tag ST-696-001 ISO Container Door Tag Required Tools and Materials Before you begin installation, make sure the following materials are available: ◆ Savi Tag ST-696-001 ISO Container Door Tag with GPS/GPRS ◆ SaviTag Write Cable STA-1030 ◆ Wall Adapter (provided) Tag commissioning with SaviTag Write Cable STA-1030 You can commission Savi Tag ST-696-001 ISO Container Door Tag using SaviTag Write Cable STA-1030. You can also commission a tag using Savi software that operates on a mobile device, such as the Intermec® 741G/A or 751G/A Mobile Computer with an attached Savi® Mobile Reader SMR-650. You can purchase the cable, software, and mobile device separately. WARNING!!! The antenna used for GSM transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter to ensure compliance with FCC (and other, national) rf exposure requirements. Note: Savi Tag ST-696-001 ISO Container Door Tag is shipped from the factory with the battery at 50% charge. Before you attempt to commission the tag, make sure the battery is fully charged. | See “Charging the Tag Battery ” on page 11.
Savi Tag ST-696-001 ISO Container Door Tag with GPRS/GPS and Sensors Installation Guide 9 1. Connect SaviTag Write Cable STA-1030 to an available serial port on the host computer. 2. Locate the tag commissioning port on the Savi ST-696-001 ISO Container Door Tag. 3. Unplug the rubber cap covering the port. 4. Insert SaviTag Write Cable STA-1030, with the LED up, into the Tag ST-696-001 commissioning port. Start the tag commissioning application. The LED is lit when the application writes data to the tag.
Savi Tag ST-696-001 ISO Container Door Tag with GPRS/GPS and Sensors Installation Guide 10 Charging the Tag Battery Savi Tag ST-696-001 ISO Container Door Tag is equipped with non-volatile memory, which means stored data is not lost when the battery is fully depleted. 1. Using a coin or flat-head screwdriver, turn the charging plug cover counterclockwise. When removing the charging plug cover, hold on to it to avoid dropping it. 2. Plug wall adapter (provided) into the standard AC outlet. 3. Plug the wall adapters’ plug into the power jack on the tag. Charging of fully depleted battery may take from 10-12 hours. In order to check whether the battery if fully charged remove that plug and wait for the tag to complete power up sequence. After several seconds the Tag will beep with 4 consecutive beeps. The fourth beep indicates battery charge state. If the fourth beep is short then the battery is full. If the fourth beep is long than the battery is low and if it is missing (only 3 beeps heard) the battery is still not fully charged. If the battery is not fully charged reconnect the wall adapter plug back into the units and wait until tag reports fully charged battery status. 4. After completing the battery charging using a coin or screwdriver. With the coin placed in the power plug cover groove, push the cover in. Turn the plug cover counterclockwise 1/4 to 1/2 of a turn to properly seat the cover. Turn the battery cover clockwise until it fits flush with the tag case. Be careful not to overtighten. Make sure the plug cover is completely closed and that it is not cross-threaded.
Savi Tag ST-696-001 ISO Container Door Tag with GPRS/GPS and Sensors Installation Guide 11 Tag Placement Savi Technology recommends that you fit the Savi Tag ST-696-001 ISO Container Door Tag above the door bracket and on the lefthand door of the container. The recommended mounting location for the tag is shown in the following photos. 1. Open the right door of the container. 2. Align the device with the bracket on the right door, if possible. 3. Using both hands, secure the device on the left door until it is flush. This is a view from inside the container.
Savi Tag ST-696-001 ISO Container Door Tag with GPRS/GPS and Sensors Installation Guide 12 4. Move the door sensor to the left and ensure that the lever is fully extended before closing the container door. This is a side view of the device mounted on the left door. This is a view of the outside of the container 5. Close the right door. This is a view of the tag on the container with both doors closed. 6. Seal the tag using the software on your mobile device. The door sensor recognizes when the right door is closed and when the container is dark. 7. After successfully sealing the tag, insert the container’s bolt into the hasp.
Savi Tag ST-696-001 ISO Container Door Tag with GPRS/GPS and Sensors Installation Guide 13 Savi Tag ST-696-001 ISO Container Door Tag Specifications A Specification Description Physical characteristics Tag Height: 10 inches Width: 6 inches Depth: 5 inches Total weight of tag 2 lb 12 ounces (1.3 Kg) Environment Temperature: -20ºC to +60ºC) operating; -40ºC to +85ºC storage Humidity: 100% non-condensing Altitude: Maximum altitude = 40,000 feet (12,192m); MIL-STD-810E Method 500.3, Procedure I RFID receiver/transmitter Ultra High Frequency transceiver: Frequency: 433.92 MHz Modulation: FSK, deviation +/- 50 KHz Data rate: 27.8 Kbps Data coding: Manchester Communication range (unobstructed): Typical range is up to 300 feet (91.44 meters) line-of-sight when mounted on a container and communicating with a Savi Fixed Reader SR-650-101 or SaviReader 410R. Typical range is 200 feet (61 meters) line-of-sight when mounted on a container and communicating with a Savi MobileReader SMR-650P-110 and SMR-650P-111 or Savi Mobile Reader SMR-650-212 Maximum transmit power: -7.4 dBm (0.18mW) typical; -2.4 dBm (0.6 mW) with ground reflection (uncommon) Air protocol: Savi EchoPoint Air Protocol 2.2 (32-bit tag identification supported) GSM/GPRS radio module GSM quad band radio: Frequency: 850MHz and 1900MHz Modulation and Data coding: as per GSM standard GPS radio module GPS receiver: Frequency: 1575MHz Modulation and Data coding: as per GPS communication specification
Savi Tag ST-696-001 ISO Container Door Tag with GPRS/GPS and Sensors Installation Guide 14 Specification Description LF receiver (downlink) Low Frequency receiver (downlink) Frequency: 123 KHz Modulation: ASK On-Off Keying Data rate: Average 1.6 Kbps, 50% duty cycle Data coding: Pulse Width Modulation Communication range: Up to 4 feet (1.22 meters) from Savi MobileReader SMR-650P-110 and SMR-650P-111 or Savi Mobile Reader SMR-650-212 Up to 12 feet (3.66 meters) from Savi Signpost (models SP-600-xxx and SP-65x-xxx) Air protocol: Savi EchoPoint Air Protocol 1.1 Network Wireless: RF read/write capable with Savi software that operates on a mobile device Wired: Serial read/write capable via Savi Tag Write Cable STA-1030 Memory On board non-volatile 128K memory and 32K sensor memory
Savi Tag ST-696-001 ISO Container Door Tag with GPRS/GPS and Sensors Installation Guide 15 Specification Description Hardware compatibility ✦ Savi Mobile Reader SMR650P (model SMR-650P-xxx) ✦ Savi Mobile Reader SMR-650 (models SMR-650-xxx) ✦ Savi Fixed Reader SR-650 ✦ Savi Signpost SP 65x series Antenna Internal loop antenna Shock and vibration Shock: MIL-STD-810E Mechanical Shock, Transit Drop Methods 516.4 Vibration: MIL-STD-810E Method 514.4, Category 10 Loose cargo test: MIL-STD-810F Method 514.5 Protection type Sealed to IP 54 ISO 1496 weatherproofing requirements Power Battery type: Li-Ion rechargeable 13.8Ah @ 3.7V, user non replaceable Battery life: min 90 days between charges (500 charge cycles) Power management: UHF sleep mode prevents unwanted collections, enabled/disabled by LF link Diagnostics: Reports low tag battery status, diagnostic data Regulatory approvals Radiated emission (intentional): U.S. emission standards as contained in FCC Part 15 and European Community emission standards as contained in EN 300 220 (433 MHz) Electromagnetic immunity: ESD compliance Exposed to 8 kV air discharge or 4 kV contact discharge in accordance with EN 301 489-1 Radiated emission (unintentional): U.S. emissions standards as contained in FCC Part 15 and European Community emission standards as contained in EN 301 489-1 Safety approval: U.S UL 1950; European EN 60950 Markings: Savi logo, product model and serial number, EMC compliance (FCC/EN)
Savi Tag ST-696-001 ISO Container Door Tag with GPRS/GPS and Sensors Installation Guide 16 Specification Description Sensors Door sensor: Senses the right side of the container door in the closed or open position Light sensor: Senses light coming through the door Temperature sensor: Integrated temperature takes readings every five minutes (default; use Savi software to adjust settings). Mounted in its own compartment to isolate it from other circuit boards Humidity sensor: Integrated humidity sensor takes readings every five minutes (default; use Savi software to adjust settings). Mounted in the same compartment as the temperature sensor Shock sensor: Senses shock in the container above a set threshold Mounting Contains a door clamp that clips onto the left-side door of a container Software EchoPoint FTMobile, EchoPoint EK-650, and Savi SmartChain Transportation Security System (TSS), Savi SmartChain Site Manager 5.6, Savi SmartChain Client Tools 4.x, TAV Tools 3.6, Savi Retriever 2.1 Accessories Wall Adapter

Navigation menu