Savi Technology ST-900-CF Vehicle Security Gateway User Manual

Savi Technology Inc Vehicle Security Gateway

User manual

Savi Security Sensor Family Copyright© 2016 1 Vehicle Security Gateway (ST-900-CF) User Guide Manufacturing plant : Dae Kyung Philippines., Inc. Lot No. 1-6, Block 20, Phase IV , Main Avenue, PEZA , Rosario, Cavite 4106, Philippines Manufacturer : Savi Technology, Inc. 3601 Eisenhower Avenue, STE 280, Alexandria VA 22304 Tel : (571) 227-7950 Fax : (571) 227-7960
Savi Security Sensor Family Copyright© 2016 2 NOTICE This manual, software and electronic circuitry are copyrighted. All rights reserved. Under the copyright laws, this manual, software and electronic circuitry may not be copied, in whole or in part without written prior consent of Savi Technology, Inc.. All information provided in this document is carefully prepared and offered in good faith as a guide in the installation, use and servicing of our products. Installers must ensure that the final installation operates satisfactorily within the relevant regulatory requirements. Savi Technology, Inc..accepts no responsibility for incorrect installation. Savi Technology, Inc.. reserves the right to change products, specifications and installation data at any time without notice. Savi Technology, Inc.. makes certain limited warranties with respect to defective diskettes, documentation and electronic circuitry. Please see the associated information contained on this page. LIMITED WARRANTY With respect to the physical documentation and physical electronic circuitry enclosed herein, Savi Technology, Inc.. warrants the same to be free of defects in materials and workmanship for a period of one year from the date of purchase. In the event of notification within the warranty period of defects in material or workmanship, Savi Technology, Inc.. will replace the defective diskettes, documentation and electronic circuitry. The remedy for breach of this warranty shall be limited to replacement and shall not encompass any other damages including but not limited to loss of profit and special incidental, consequential, or other similar claims. Savi Technology, Inc.. specifically disclaims all other warranties, expressed or implied, including but not limited to implied warranties of merchantability and fitness for a particular purpose with respect to defects in the documentation and electronic circuitry and the program license granted herein, in particular, and without limiting operation of the program license with respect to any particular application, use or purpose.
Savi Security Sensor Family Copyright© 2016 3 IMPORTANT SAFETY INFORMATION NOTE : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. RF EXPOSURE STATEMENT Your Transmitter contains a radio frequency transmitter. When physical damage or un-lock is the transmitter sends our RF signals. To comply with FCC RF exposure compliance requirements, a separation distance of at least 11.81 inches (30 cm) must be maintained between the antenna of this transmitter and all persons, during normal operation. The antenna used for this transmitter must not be collocated or operating in conjunction with any other antenna of transmitter. Unauthorized antennas, modifications, of attachments could damage the transceiver and may violate FCC regulations. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help.
Savi Security Sensor Family Copyright© 2016 4 Table of Contents About the Savi Security Sensor Family .......................................................................................... 5 Introduction .................................................................................................................................. 5 What’s New? ............................................................................................................................... 5 Sensor Family and Components .................................................................................................... 6 Sensor Models ............................................................................................................................ 6 Specifications .............................................................................................................................. 7 Using the Sensors ........................................................................................................................... 8 Turning on the Mobile Security Parents and/or Child Sensors .................................................. 8 Charging the Mobile Security Parent .......................................................................................... 8 LED Light Patterns ...................................................................................................................... 9 Journeys with a Mobile Security Parent Only ............................................................................... 12 Creating the Journey ................................................................................................................. 12 Arming the Mobile Security Parent ........................................................................................... 13 Journeys with One or More Mobile Security Child Sensors ......................................................... 16 Creating the Journey ................................................................................................................. 16 Arming the Mobile Security Parent and Child ........................................................................... 17 Troubleshooting ............................................................................................................................ 20 Replacing a Child Sensor ......................................................................................................... 20 Maintenance.................................................................................................................................. 24 Cleaning Instructions ................................................................................................................. 24 Replacing a Cable ..................................................................................................................... 24 Storing the Sensors ................................................................................................................... 24
Savi Security Sensor Family Copyright© 2016 5 About the Savi Security Sensor Family Introduction The Savi Security Sensor Family provides users security and visibility while tracking high-value assets and cargo throughout their global supply chains. Savi Tracking is designed to provide users a seamless and complete view of the location and security status of in-transit assets and cargo. With an in-house security sensor system that is purpose-built to integrate directly with Savi Tracking, we are able to provide users a powerful, low-cost, all-in-one tracking and security solution that is complete with encrypted data capabilities and two-way, over-the-air communication. The Savi Security Sensor Family consists of two types of Parent Security Sensors and Child Security Sensors. What’s New? The Savi Security Sensor Family features advanced, powerful sensors while being small, light, and convenient to handle. Our new, easy-to-use design features a built-in cable and a lock that secures with the push of a finger. The devices are already pre-configured to work seamlessly with our Savi Tracking software.
Savi Security Sensor Family Copyright© 2016 6 Sensor Family and Components Sensor Models Vehicle Security Gateway Model No. ST-900-CF
Savi Security Sensor Family Copyright© 2016 7 Specifications Vehicle Security Gateway, ST-900-CF PHYSICAL LxWxH  152 mm x 76 mm x 38 mm (excluding mounting tabs and external cable) Weight  0.36 kg ENVIRONMENTAL Temperature  -30°C to +50°C Operating  -40°C tp +70°C Non-Operating Humidity  95% RH @ 50°C Non-Condensing Vibration and Shock  U.S. Military Standards 202G and 810F, SAE J1455 Weatherproofing  IP64 WIRELESS Frequency  433 MHz(UHF) , 850/900/1800/1900 MHz , Protocol  ISO 18000-7 (Active RFID), Quad-Band GPRS Location  22-channel GPS with Cellular Triangulation Backup POWER External Power  DC 24V / 2A Backup Battery  DC 3.7V / 1400 mAh Li-polymer battery REGULATORY APPROVALS RoHS Compliant EMC/EMI  SAE J1113, FCC-Part 15B, Industry Canada Global Certifications  FCC, CE, I-SAFE (ATEX, IEC, UL913 Zone 1 Groups A,B,C,D) SENSORS  3-axis accelerometer  Motion
Savi Security Sensor Family Copyright© 2016 8 Using the Sensors Turning on the Mobile Security Parents and/or Child Sensors For the Mobile Security Parent and Child Sensors: To turn on the Mobile Security Parent and Child Sensors, pull the plungers up. For the Vehicle Security Gateway: Turn on the truck or vehicle ignition to turn on the sensors. Charging the Mobile Security Parent The Mobile Security Parent is rechargeable with a USB cable. Charge sensors using the Savi-approved Mini USB cable and charger by plugging it into an outlet that is connected to a power source. Note: Mobile Security Child is not rechargeable. The Vehicle Security Gateway is recharged automatically once connected to the vehicle power.
Savi Security Sensor Family Copyright© 2016 9 LED Light Patterns All Savi Security Sensors include a two-color red/green LED indicator that details various status conditions. These LED patterns are defined below and should be used to assist in system operation and troubleshooting as necessary. Parent Sensor LED Patterns Initialization Low Battery Alert GSM Connection Good GPRS Connection Good
Savi Security Sensor Family Copyright© 2016 10 TCP Connection Good Communicating with Server Searching for Child Paired Child Located Ready to Arm/No GPS Fix Ready to Arm/GPS Fix Security Tamper
Savi Security Sensor Family Copyright© 2016 11 Child Sensor LED Patterns Initialization Low Battery Alert Communicating with Parent Searching for Parent Paired Parent Located Ready to Arm/Parent Linked Security Tamper
Savi Security Sensor Family Copyright© 2016 12 Journeys with a Mobile Security Parent Only Creating the Journey 1. Log into Savi Tracking. 2. Create a Journey by performing the following steps: a. Select an Owner and Corridor from the drop-down list. b. Enter the Asset Number. c. Enter the Mobile Security Parent serial number in the “Tracking Tag” field. d. Click “Begin Journey” to indicate you are ready to arm tags.
Savi Security Sensor Family Copyright© 2016 13 Arming the Mobile Security Parent 1. Turn on the sensor. 2. Loop the pin and cable through lock or door on container or vehicle. 3. Push pin down into the plunger firmly until it clicks into place. Then push the plunger down to arm and lock the sensor.
Savi Security Sensor Family Copyright© 2016 14 4. The green bullet will display in Savi Tracking to show that the Mobile Security Parent is armed and ready. 5. Once the Mobile Security Parent is armed, select “Depart Journey” from the drop-down list.
Savi Security Sensor Family Copyright© 2016 15 6. The Current Status of the journey will change to “Secure Transit”.
Savi Security Sensor Family Copyright© 2016 16 Journeys with One or More Mobile Security Child Sensors Creating the Journey 1. Log into Savi Tracking. 2. Create a Journey by performing the following steps: a. Select an Owner and Corridor from the list. b. Enter the Asset Number. It is possible to either work with a registered asset or with a non-registered asset. If a registered asset is selected from the drop-down list, then the Tracking Tag field will automatically be filled in with the Vehicle Security Gateway serial number. c. When working with a non-registered asset, enter the Mobile Security Parent serial number in the “Tracking Tag” field. d. Scroll down to the Tag Details section and enter the Security Child Sensor IDs and Tag Point Names.
Savi Security Sensor Family Copyright© 2016 17 e. When done, click Begin Journey. Arming the Mobile Security Parent and Child 1. Turn on the sensors; make sure the Parent and Child are in close proximity to each other. Verify LED lights for successful pairing. 2. To arm the both the Mobile Security Parent and the Mobile Security Child, loop the pin and cable through lock or door on container or vehicle.
Savi Security Sensor Family Copyright© 2016 18 3. Push pin down into the plunger firmly until it clicks into place. Then push the plunger down to arm and lock the sensor. 4. The green bullets will display in Savi Tracking to show that the Mobile Security Child Sensors are armed and ready.
Savi Security Sensor Family Copyright© 2016 19 5. Once the Child Sensors are armed, select “Depart Journey” from the drop-down list. 6. The Current Status of the journey will change to “Secure Transit.”
Savi Security Sensor Family Copyright© 2016 20 Troubleshooting Replacing a Child Sensor For various reason, it may be necessary to replace a Child Sensor on a journey, for example because:  The child sensor isn’t pairing with the parent sensor  The child sensor isn’t arming  The Child sensor has a low battery To replace a Child Sensor on a journey, perform the following steps: 1. Search for the journey using the Journey screen.
Savi Security Sensor Family Copyright© 2016 21 2. Click on the journey to display the journey details. 3. Click on Full Details to display the full journey details.
Savi Security Sensor Family Copyright© 2016 22 4. Click pencil symbol to edit the journey: 5. Delete the sensor that needs to be replaced by clicking on the “X” symbol next to it.
Savi Security Sensor Family Copyright© 2016 23 6. Add a new sensor by start typing the Child Sensor ID and selecting it from the drop-down list. 7. When done, click “Save”
Savi Security Sensor Family Copyright© 2016 24 Maintenance Cleaning Instructions TBD Replacing a Cable TBD Storing the Sensors TBD Copyright © 2016 Savi Technology. All rights reserved. Printed in the United States of America. All trademarks used are properties of their respective owners. This document is proprietary to Savi Technology. Do not reproduce, use or disclose without permission. We have made every effort to ensure the accuracy of all information contained in this document; however, Savi Technology makes no expressed or implied warranty or representation based upon the enclosed information.
Savi Security Sensor Family Copyright© 2016 25

Navigation menu