Schlage Electronic Security 2PXI Door Lock User Manual 57017

Schlage Electronic Security Door Lock 57017

Contents

Users Manual 1 of 2

INSTALLATION INSTRUCTIONS SCHLAGE COBRA SPM-2PXIFORM 57017 01-13-2003PAGE 8How to use the SPC-2PX Safe School Cobra Lock:The lock is programmed by computer. While only toggle proximity credentials should be used,any authorized credential will function as a toggle credential when presented.Normal Use:Authorized credentials will toggle the door unlocked or locked. Each time a credential is present-ed to the inside or outside reader the lock will reverse its condition and the GREEN LED on theinside and outside will flash rapidly for five seconds.EMERGENCY LOCKDOWN MODE:To enter emergency Lockdown Mode the door must be closed and an authorized credential mustbe presented. During the five second period that the GREEN LED is flashing the panic buttonmust be pushed. The RED LED on the inside will flash slowly for several seconds. The LEDs onthe outside will be extinguished so as to not draw attention to the door. As soon as the panic but-ton is pushed the lock will go into lockdown - even if it is toggled unlocked it will lock immediate-ly. If an authorized normal, toggle, or one-time credential is presented to either the interior orexterior reader during Lockdown Mode, the interior and exterior RED LEDs will flash nine timesrapidly to assure that the lock is still in Lockdown Mode. If the panic button on the inside ispressed while in Lockdown Mode the interior RED LED will flash slowly for six seconds.TO CLEAR EMERGENCY LOCKDOWN MODE:1. Opening the door will cancel Lockdown Mode but leave the door locked until it is toggledopen.2. Entering a Pass-Thru/Superuser credential or a Lockout Credential followed by a normal usecredential will unlock the lock for five seconds but return it to the locked condition. LockdownMode will be cancelled if the door is opened unless the panic button is pressed again (with the door closed).Important!Door must be closed to enter any prox credential or for pushing the button to be effective.It must also be closed in order to program the lock.Changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipment.

Navigation menu