Schlage Electronics Solution Sheet Sielox AD 400 105631

User Manual: Schlage Electronics Solution Sheet Sielox AD 400 Data Sheets

Open the PDF directly: View PDF PDF.
Page Count: 4

DownloadSchlage Electronics  Solution Sheet Sielox AD 400 105631
Open PDF In BrowserView PDF
Integrated
security solution
with AD-400 wireless and
AD-300 hardwired devices and
Sielox Pinnacle™ server

Overview
Schlage AD Series locks seamlessly integrate with Sielox Pinnacle Server to provide a
cost effective and scalable access control solution to meet your security needs.

System Capabilities
Summary
§§

AD-400 wireless:
−− Secure 900 MHz wireless communication,
AES-128 bit encrypted
−− Real time access control and monitoring
−− Powered by four (4) standard off-the-shelf
AA batteries
−− Patent pending wireless lockdown /unlock
feature via PIM400-485 (10 seconds or less)
preserves up to 2 year battery life

§§

AD-300 hardwired:
−− Field configurable fail safe/fail secure

§§

Sielox AC -1700 controller supports a maximum
of 32 AD -400 wireless devices

§§

Additional details on readers supported and
chassis types available on page 3 and 4

§§

Weather resistant, exterior operating
temperature: -31° to 151°F (-35° to 66°C)

§§

ANSI/BHMA A156.25, ANSI/BHMA Grade 1,
UL 294, UL 10C

Schlage AD Series locks combine the components typically found around the door,
such as the door position switch and the request to exit switch, into one unit which
simplifies installation and saves money. And since they are designed to be modular,
Schlage AD Series locks can easily be upgraded in the future to meet your changing
security and technology requirements.
The AD Series is available in both hardwired and wireless configurations to suit the
requirements of the facility. AD Series wireless locks provide many of the key benefits
of a hardwired system including real-time monitoring, audit trails, centralized
lockdown and instant access control management. In retrofit applications the
Schlage AD Series wireless locks and devices, which eliminate the need to run wires
direct to each opening, can help you extend the reach of your access control system.

AD-400 and AD-300 via RS-485 with
Sielox Pinnacle™ Software and AC-1700™
§§

Sielox AC-1700 Controllers have a single
RS-485 port that supports up to 16
AD-300 hardwired locks and/or 16
PIM400-485s with up to 32 AD-400
locks. When combining AD-300 and
AD-400 locks there is a maximum of 32
total AD locks.

*Older versions of Sielox Pinnacle Software and
Firmware will function but will support a different
feature set. Please contact Sielox for more information.

Version
9.2.08 or
greater *

Ethernet

Schlage protocol

Sielox Pinnacle™ Server

Firmware
version 19.07
or greater *

RS-485

900 MHz

PIM400-485
Panel interface module

AD-400
Wireless devices

Sielox AC-1700
Controller

900 MHz

PIM400-485
Panel interface module

AD-300
Hardwired devices

AD-300
Hardwired devices

Note:
Please refer to AD-400, AD-300 and PIM400-485 data sheets for complete AD Series specifications. Please contact Sielox for Wiegand Solutions.

For additional information contact Sielox: 1.800.424.2126 or info@sielox.com

AD-400
Wireless devices

System capabilities:
AD-400
PIM400-485

AD-300
Direct RS485

Maximum number of readers supported by controller/PIM

32

16

Maximum number of readers per PIM400

Up to 16

N/A

Maximum number of PIM400s per RS-485 port

Up to 16

N/A

Access control decision made by host or controller or by lock database

AC-1700

AC-1700

Remote Linking capability via Host

Yes

N/A

Keypad only

Yes1

Yes1

Magnetic stripe card

Yes (ABA Tracks 1, 2, 3)

Yes (ABA Tracks 1, 2, 3)

Multi-technology - 125 kHz proximity and 13.56 MHz smart card

Yes

Yes

PIV & PIV-I card compatible

Yes

Yes4

Card + PIN

No

No

Request to exit

Yes

Yes

Door position

Yes

Yes

Mechanical key override

No

No

Request to enter

No

No

Low battery status

Yes

N/A

Communication status: RF/RS-485

Yes/Yes2

N/A

Remote lockdown/unlock

Yes (<10 sec)3

Yes

Deadbolt position

Yes

Yes

Interior push button

Yes

Yes

Yes

Yes

Features

Readers - see supported card
formats below

4

Status monitors

Lock functions
Classroom/storeroom

Please contact
Sielox for additional
details on integrated
features and credentials
supported.

Supported card formats
Proximity cards (125 kHz):
§§ AWID®
§§ GE/CASI®
§§ HID®
§§ Schlage®
§§ XceedID®

1

If keypad output mode is set to emulate a 26 bit Wiegand card (mode 7)

2

Requires Maintenance Screen Website to see status

3

if > 1 device unlock time is < 20 seconds

4

Yes for PIV cards, No PIV-I

Smart cards (13.56 MHz):
§§ aptiQ™ MIFARE Classic
§§ aptiQ™ MIFARE DESFire™ EV1
§§ PIV cards 4

Smart cards (13.56 MHz) reads card serial number only:
§§ HID iCLASS®
§§ DESFire®
§§ MIFARE®
§§ MIFARE DESFire™ EV1

For additional information contact Sielox: 1.800.424.2126 or info@sielox.com

Available AD Series reader modules

Multi-technology

Multi-technology

§§ Proximity
§§ Smart card

§§ Proximity
§§ Smart card

+

KEYPAD

Magnetic stripe
(insertion)
+

Magnetic stripe
(insertion)

KEYPAD

Magnetic stripe
(swipe)
+

Keypad

Magnetic stripe
(swipe)

Will support
Keypad Only if
output mode is
set to emulate a
26 bit Wiegand
card (mode 7)

KEYPAD

FIPS 201-1 compliant
option available (FMK)

Compatibility
AD Series electronic locks from Schlage
are built from the ground up to provide
more options, more functionality and more
compatibility than any other solution on
the market today. Designed to suite with
the most popular lever styles and finishes,
Schlage AD Series locks can be configured to
accept most major key systems. See lever and
cylinder compatibility data sheet (010432).

Mortise Lock
(AD-400/300-MS)

Cylindrical Lock
(AD-400/300-CY)

Handheld device
(HHD)
Used to initialize,
configure, and test
AD Series Devices

Exit Device Trim
(AD-400/300-993)

The AD Series exit trims are exclusively
compatible with exit devices made by Allegion
when using the low current request to exit switch
(RX-LC part # 050281 for Von Duprin 98/99 &
Von Duprin 22/22F Rim/SVR devices and part
number 650359 for Falcon 25 Rim devices).

Lever styles

Finishes

Standard cylinders shown, SFIC and FSIC also available.

Warm tone finishes

Sparta

Rhodes

605
Bright brass

Athens

Tubular

606
Satin brass

Cool tone finishes

612
Satin bronze

643e
Aged bronze

619
Satin nickel

625
Bright chrome

626
Satin chrome

626AM
Satin chrome with
antimicrobial

Allegion, the Allegion logo, Schlage, the Schlage logo, Von Duprin, Falcon, and aptiQ are trademarks of Allegion plc, its subsidiaries
and/or affiliates in the United States and other countries. All other trademarks are the property of their respective owners.

About Allegion
Allegion (NYSE: ALLE) is a global pioneer in safety and security, with leading brands
like CISA®, Interflex®, LCN®, Schlage® and Von Duprin®. Focusing on security around the
door and adjacent areas, Allegion produces a range of solutions for homes, businesses,
schools and other institutions. Allegion is a $2 billion company, with products sold in
almost 130 countries. For more, visit www.allegion.com.

© 2015 Allegion
005631, Rev. 08/15
www.allegion.com/us

For additional information contact Sielox: 1.800.424.2126 or info@sielox.com



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Create Date                     : 2015:09:22 15:28:02-05:00
Metadata Date                   : 2015:09:22 15:28:23-05:00
Modify Date                     : 2015:09:22 15:28:23-05:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Instance ID                     : uuid:8c56456f-5d32-3d4f-81b8-3ac62f6e386e
Original Document ID            : xmp.did:1B9DBD0D2A2068119A82B324BB5F3DDD
Document ID                     : xmp.id:7FBC655F8E206811822ABDEE02568EF3
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:7EBC655F8E206811822ABDEE02568EF3
Derived From Document ID        : xmp.did:7D35019C71206811822A9AC81F4D062B
Derived From Original Document ID: xmp.did:1B9DBD0D2A2068119A82B324BB5F3DDD
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2015:09:22 15:28:02-05:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 4
Creator                         : Adobe InDesign CS6 (Macintosh)
EXIF Metadata provided by EXIF.tools

Navigation menu