Schlage Electronics M400 Series TJ Kit Installation Instructions 105813

User Manual: Schlage Electronics M400-Series TJ Kit Installation Instructions Installation Manuals

Open the PDF directly: View PDF PDF.
Page Count: 4

DownloadSchlage Electronics M400-Series TJ Kit Installation Instructions 105813
Open PDF In BrowserView PDF
*44487312*

M400 Series TJ Locks

44487312
Electromagnetic Locks for Inswinging Doors
M420TJ, M422TJ, M450TJ, M452TJ, M490TJ, M492TJ

Installation Instructions

LL These instructions cover only the mounting of the lock(s) using TJ brackets. Before proceeding with installation, see main
electromagnetic lock instructions for the following information:
• Electrical Specifications
• Reorienting the Magnet
• ATS and MBS Indicator Installation
• Connecting Wiring to Board

1

Place template and prepare holes.

Single
a. Place template on top corner, opposite of hinges.
b. Mark holes and prepare them per template.
Shown from Interior

Template

Double
a. Place template on top centerline of doors.
b. Mark holes and prepare them per template.
Shown from Interior

Template

2

Reorient the magnet(s)
• SINGLE LOCKS: The magnet may need to be reoriented before installation, depending on the handing of your door.
• DOUBLE LOCKS: The magnet in one of the locks must be reoriented before installation.
• See the instructions that came with your lock(s) for information about magnet orientation.

3

Attach frame L-Bracket.
Single

Double
Inside

Inside

Actual Size

Reinforced Metal

4

Attach mounting bracket(s).
a. Place template on gate and post surfaces as marked on template.
b. Mark holes and prepare them per template.
Single
Double

Actual Size

2

Sheet Metal

5

Double lock ONLY: Install join block.

5a Remove wiring covers and end blocks.

6

5b Install join block.

Install magnet(s).

6a SINGLE AND DOUBLE LOCKS: Slide magnet onto bracket.

6b DOUBLE LOCK ONLY: Slide second magnet onto bracket.
Join block slides into first magnet housing.

Inside

7

Secure magnet(s).

7a Single lock.

7b Double lock

Actual Size

3

8

Assemble armature

8a Attach armature to top L-Bracket.

8c Attach bottom L-Bracket to door.

Top
L-Bracket

WARNING
The included sex nut is for 1C\v” (45 mm) doors ONLY. For other door
thicknesses, please contact customer service, 1-877-671-7011. Using
the incorrect sex nut for your door thickness will lead to improper
function and possible injury.

Actual Size
Armature
Holder

Armature bolt must be tightened to at least 120 in.-lbs. for all doors
except composite wood doors. For composite wood doors, tighten only
to tight and flush. 120 in.-lbs. may damage composite wood doors.
DO NOT back off bolt after tightening! Backing off the bolt after
tightening will loosen the thread-locking patch, which may allow the bolt
to loosen over time.

8b Attach armature plate to armature holder.
LL Use bolt that came with lock.

WARNING

Actual Size

Use bolt from TJ kit.
M490 armature must be disassembled to replace armature bolt.

Flat Washer
Star Locking Washer
Cone Washer
Actual Size

Armature Bolt
Actual Size

Armature
Plate

Top
L-Bracket
Inside

9

Actual Size

Attach and adjust armature.

9a Attach armature assembly to bottom L-Bracket
Actual Size

Actual Size

9b Adjust armature
a.
b.
c.
d.

Close door.
Press armature to fully engage with magnet.
Fully tighten two screws and set screw to lock position.
If double, repeat adjustment process on second door.
Press armature
to magnet

Inside

Two (2)
screws

Customer Service
1-877-671-7011

www.allegion.com/us

© Allegion 2015
Printed in U.S.A.
44487312 Rev. 11/15-d
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2015:11:05 10:13:59-07:00
Creator                         : Adobe InDesign CS6 (Windows)
Modify Date                     : 2016:02:17 16:13:58-07:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2016:02:17 16:13:58-07:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:85f7e6f3-64e0-4a25-82ba-7064af5280a7
Original Document ID            : xmp.did:516915126ECCE1118A0D8AD340C27D6B
Document ID                     : xmp.id:545D3F7CE083E511A749B545D74E8700
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:F9DAA659DF83E511A749B545D74E8700
Derived From Document ID        : xmp.did:E637D0EAC97CE511B62DD901D5AE6DBD
Derived From Original Document ID: xmp.did:516915126ECCE1118A0D8AD340C27D6B
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2015:11:05 10:13:59-07:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 4
EXIF Metadata provided by EXIF.tools

Navigation menu